openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File macros.qt6 of Package qt6-macros

#
# Macros for Qt6 packages
#
# SPDX-License-Identifier: MIT
#
####################################################################
# Provides the following macros:
#
# %%cmake_qt6
#   Runs CMake using the default paths for Qt6 packages
#
# %%qt6_build
#   Builds the project with the selected build tool
#
# %%qt6_install
#   Installs the project once built
#
# %%qt6_use_make
#   Use 'make' instead of 'ninja' for building
#
#   Alternatively, you can add the following line in your spec file:
#   %%global %%__qt6_build_tool make
#
# %%qt6_build_docs
#   Build the documentation for the package
#
# %%qt6_install_docs
#   Install the generated documentation
#
# %%qt6_doc_packages
#   Creates documentation packages.
#   When using this macro, two subpackages will be defined for
#   qch and html docs.
#
# See below for details about documentation packages
#
# %%qt6_examples_package
#   If the package you're building contains examples, this macro
#   will create a -examples subpackages and handle the installed
#   files.
#
# %%qt6_link_executables
#   Executables are installed in %%{_qt6_bindir}.
#   To avoid conflicts with older versions, symlinks are created
#   in %%{_bindir} with the '6' suffix.
#   You may call this macro in your %install section to create the
#   links.
#
# %%qmake6
#   Configure a project using qmake
#
# %%qmake6_build
#   Builds a project configured using the %%qmake6 macro
#
# %%qmake6_install
#   Installs a project configured using the %%qmake6 macro
#
####################################################################

####################################################################
# Notes about documentation packages:
#
# There are different ways to create documentation packages.
#
# NOTE: all methods described below need a 'BuildRequires: qt6-tools'
# line.
#
# Method #1: Build flavors (recommended)
#   The build service allows building different packages with a
#   single spec file.
#
#   Create a _multibuild file containing:
#       <multibuild>
#         <flavor>docs</flavor>
#       </multibuild>
#
#   Add this to the spec file header, add:
#
#       %global qt6_flavor @BUILD_FLAVOR@%{nil}
#
#   The following code shall be added after the other build requirements:
#
#       %if "%qt6_flavor" == "docs"
#       BuildRequires:  qt6-tools
#       %{qt6_doc_packages}
#       %endif
#
#   This will ensure the 'qt6-tools' package is installed for building
#   documentation and also define and populate the two documentation
#   subpackages.
#
#   Two commands are available to disable parts of the spec file that are
#   not needed when building the 'docs' flavor:
#       %if %{qt6_docs_flavor}  : true if the docs flavor is built
#       %if !%{qt6_docs_flavor} : true if the docs flavor is not built
#       (note the position of the '!' sign)
#
#   They shall be used to ignore: 
#     - non-docs packages descriptions
#     - post-install actions
#     - %files sections
#
#
# Method #2: doc subpackage
#   Create a spec file for the documentation package.
#   The %%qt6_doc_packages macro will create the %%package and
#   %%files sections for both the QCH and HTML documentation
#   packages.
#
#   The %%qt6_build_docs and %%qt6_install_docs macros will
#   respectively replace the %%qt6_build and %%qt6_install
#   invokations.
#
#   When using a documentation subpackage, it is recommended to copy
#   the 'BuildRequires' and '%%bcond' lines from the main package
#   spec file.
#
#   Example:
#   In qt6-svg-docs.spec, use %%qt6_doc_packages, %%qt6_build_docs
#   and %%qt6_install_docs.
#   2 subpackages will be defined (qt6-svg-docs-html and qt6-svg-docs-qch)
#   and the respective %files sections will be populated automatically.
#
####################################################################

#--------------------------------------------------------------

%qt6_docs_flavor ("%qt6_flavor" == "docs")

#--------------------------------------------------------------

# Default paths
%__qt6_sourcedir .
%__qt6_builddir build

# Use 'ninja' by default.
# Alternative: Use the %%qt6_use_make macro
%__qt6_build_tool %__ninja

# Default build type
%__qt6_build_type RelWithDebInfo

# Module name (without the 'qt6-' prefix)
%__qt6_module_name %(echo %{name} | cut -d'-' -f2)

# _qt6_<variable> shall be used in files sections
%_qt6_prefix          %{_prefix}
%_qt6_libdir          %{_libdir}
%_qt6_includedir      %{_includedir}/qt6
%_qt6_sharedir        %{_datadir}
%_qt6_archdatadir     %{_qt6_libdir}/qt6
%_qt6_bindir          %{_qt6_archdatadir}/bin
%_qt6_examplesdir     %{_qt6_archdatadir}/examples
%_qt6_importsdir      %{_qt6_archdatadir}/imports
%_qt6_libexecdir      %{_qt6_archdatadir}/libexec
%_qt6_mkspecsdir      %{_qt6_archdatadir}/mkspecs
%_qt6_pluginsdir      %{_qt6_archdatadir}/plugins
%_qt6_qmldir          %{_qt6_archdatadir}/qml
%_qt6_testsdir        %{_qt6_archdatadir}/tests
%_qt6_datadir         %{_qt6_sharedir}/qt6
%_qt6_docdir          %{_qt6_sharedir}/doc/qt6
%_qt6_descriptionsdir %{_qt6_datadir}/modules
%_qt6_translationsdir %{_qt6_datadir}/translations

# Use %%{_sysconfdir}/xdg if %%{_distconfdir} is undefined
%_qt6_sysconfdir %{?_distconfdir:%{_distconfdir}/xdg}%{!?_distconfdir:%{_sysconfdir}/xdg}

# Variables only used for packaging
%_qt6_cmakedir        %{_qt6_libdir}/cmake
%_qt6_metatypesdir    %{_qt6_archdatadir}/metatypes
%_qt6_pkgconfigdir    %{_qt6_libdir}/pkgconfig

#--------------------------------------------------------------

%qt6_use_make %global __qt6_build_tool %__make

#--------------------------------------------------------------
# NOTE:
# Due to how gcc-pie is packaged, the PIE flags are only
# recognized by the default compiler (boo#1195628)
# We can't rely on the check_pie_supported() function. That's
# why CMAKE_CXX_LINK_PIE_SUPPORTED is enabled
%cmake_qt6 \
  cmake -DCMAKE_BUILD_TYPE:STRING=%{__qt6_build_type} \\\
        -DCMAKE_INSTALL_PREFIX:STRING=%{_qt6_prefix} \\\
        -DCMAKE_MESSAGE_LOG_LEVEL:STRING=STATUS \\\
        -S %__qt6_sourcedir \\\
        -B %__qt6_builddir \\\
%if "%__qt6_build_tool" == "%__ninja" \
        -GNinja \\\
%else \
        -G"Unix Makefiles" \\\
%endif \
%if 0%{?suse_version} == 1500 \
        -DCMAKE_C_COMPILER:STRING=gcc-10 \\\
        -DCMAKE_CXX_COMPILER:STRING=g++-10 \\\
        -DCMAKE_CXX_LINK_PIE_SUPPORTED:BOOL=ON \\\
%endif \
        -DQT_DISABLE_RPATH:BOOL=ON \\\
        -DCMAKE_C_FLAGS:STRING="%{optflags}" \\\
        -DCMAKE_CXX_FLAGS:STRING="%{optflags}" \\\
        -DCMAKE_EXE_LINKER_FLAGS:STRING="-Wl,--as-needed -Wl,--no-undefined" \\\
        -DCMAKE_MODULE_LINKER_FLAGS:STRING="-Wl,--as-needed -Wl,--no-undefined" \\\
        -DCMAKE_SHARED_LINKER_FLAGS:STRING="-Wl,--as-needed -Wl,--no-undefined"

#--------------------------------------------------------------

%__qt6_build_options %__qt6_builddir %{?_smp_mflags}

#--------------------------------------------------------------

%qt6_build \
%if %{qt6_docs_flavor} \
    %{qt6_build_docs} \
%else \
    cmake --build %{__qt6_build_options} -v \
%endif

#--------------------------------------------------------------

# NOTE:
# The tools used to build building qch docs need to find
# the 'minimal' QPA plugin and the path to the sqlite plugin location
%qt6_build_docs \
  export QT_QPA_PLUGIN_PATH="%{_qt6_pluginsdir}/platforms" \
  export QT_PLUGIN_PATH="%{_qt6_pluginsdir}" \
  cmake --build %{__qt6_build_options} -t docs \
%{nil}

#--------------------------------------------------------------

# Note: The 'ninja' generator doesn't create 'install/fast' targets.
%qt6_install \
%if %{qt6_docs_flavor} \
    %{qt6_install_docs} \
%else \
    DESTDIR=%{buildroot} cmake --build %{__qt6_build_options} -v \\\
%if "%__qt6_build_tool" == "%__make" \
  -t install/fast \
%else \
  -t install \
%endif \
%endif

#--------------------------------------------------------------

%qt6_install_docs \
  DESTDIR=%{buildroot} cmake --build %{__qt6_build_options} -t install_docs \
  # in Qt 6.0.0, %%{_qt6_docdir}/*.qch are folders which contain \
  # files with the same name. \
  # Starting with 6.0.1, the file is installed in %%{_qt6_docdir} directly. \
  # We need a %%pre scriptlet to remove the old folder before upgrading. \
  _current_dir=`pwd` \
  pushd %{buildroot}%{_qt6_docdir} \
  for qch_file in *.qch ; do \
    echo "if [ -d %{_qt6_docdir}/${qch_file} ] ; then rm -r %{_qt6_docdir}/${qch_file} ; fi" >> ${_current_dir}/qch.pre \
  done \
  popd \
%{nil}

#--------------------------------------------------------------

%qt6_link_executables \
  mkdir -p %{buildroot}%{_bindir} \
  pushd %{buildroot}%{_qt6_bindir} \
  for i in * ; do \
    ln -s %{_qt6_bindir}/$i %{buildroot}%{_bindir}/${i}6 \
  done \
  popd \
%{nil}

#--------------------------------------------------------------

# The %%qt6_doc_packages macro shall produce packages with
# correct names if invoked in qt6-foo-docs.spec but also if
# called from qt6-foo.spec
%__qt6_doc_package_name qt6-%{__qt6_module_name}-docs

%qt6_doc_packages \
%package     -n %{__qt6_doc_package_name}-html \
Summary:     Documentation for qt6-%{__qt6_module_name} in HTML format \
License:     GFDL-1.3-or-later \
\
%description -n %{__qt6_doc_package_name}-html \
This package contains documentation for qt6-%{__qt6_module_name} in HTML format. \
\
%package     -n %{__qt6_doc_package_name}-qch \
Summary:     Documentation for qt6-%{__qt6_module_name} in QCH format \
License:     GFDL-1.3-or-later \
\
%description -n %{__qt6_doc_package_name}-qch \
This package contains documentation for qt6-%{__qt6_module_name} in QCH format. \
\
%pre -n %{__qt6_doc_package_name}-qch -f qch.pre \
\
%files -n %{__qt6_doc_package_name}-html \
%dir %{_qt6_docdir} \
%{_qt6_docdir}/* \
%exclude %{_qt6_docdir}/*.qch \
\
%files -n %{__qt6_doc_package_name}-qch \
%dir %{_qt6_docdir} \
%{_qt6_docdir}/*.qch \
%{nil}

#--------------------------------------------------------------

%qt6_examples_package \
%package examples \
Summary:        Examples for the %{name} modules \
\
%description examples \
Examples for the %{name} modules. \
\
%files examples \
%{_qt6_examplesdir}/* \
%{nil}

#--------------------------------------------------------------

# qmake still exists in Qt6
%__qt6_qmake %{_qt6_bindir}/qmake

#--------------------------------------------------------------

%qmake6 \
  %__qt6_qmake \\\
  QMAKE_CXXFLAGS="$CXXFLAGS %{optflags}" \\\
  QMAKE_CFLAGS="$CFLAGS %{optflags}" \\\
  QMAKE_LFLAGS="$LDFLAGS -Wl,--as-needed -Wl,--no-undefined"

#--------------------------------------------------------------

%qmake6_build \
  %{__make} %{?_smp_mflags} VERBOSE=1

#--------------------------------------------------------------

%qmake6_install \
  %{__make} INSTALL_ROOT=%{buildroot} install

#--------------------------------------------------------------

Places

File macros.qt6 of Package qt6-macros

Places