openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File rc.ncpd of Package plptools

#! /bin/sh
# Copyright (c) 1995-2002 SuSE Linux AG, Nuernberg, Germany.
# All rights reserved.
#
# Author: Petr Ostadal, feedback to http://www.suse.de/feedback
#
# /etc/init.d/ncpd
#
#   and its symbolic link
#
# /usr/sbin/rcncpd
#
### BEGIN INIT INFO
# Provides:          ncpd
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     3 5
# Default-Stop:      0 1 2 6
# Short-Description: Daemon which handles the serial link to a Psion
# Description:       ncpd is the daemon which handles the serial link to your
#      Psion. It listens at port 7501 for local connections and provides basic 
#      PLP/NCP services for plpnfsd and plpftp and other front-ends. It 
#      auto-connects to the psion, even after unplugging/switching off therefore
#      it can run always in background (if you have a spare serial-device).
### END INIT INFO

NCPD_BIN=/usr/sbin/ncpd
test -x $NCPD_BIN || exit 5

PLPTOOLS_CONFIG=/etc/sysconfig/plptools
test -r $PLPTOOLS_CONFIG || exit 6
. $PLPTOOLS_CONFIG

. /etc/rc.status

# Reset status of this service
rc_reset

# Return values acc. to LSB for all commands but status:
# 0	  - success
# 1       - generic or unspecified error
# 2       - invalid or excess argument(s)
# 3       - unimplemented feature (e.g. "reload")
# 4       - user had insufficient privileges
# 5       - program is not installed
# 6       - program is not configured
# 7       - program is not running
# 8--199  - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
# 
# Note that starting an already running service, stopping
# or restarting a not-running service as well as the restart
# with force-reload (in case signaling is not supported) are
# considered a success.

case "$1" in
    start)
	echo -n "Starting ncpd "
	## Start daemon with startproc(8). If this fails
	## the return value is set appropriately by startproc.
	startproc -f $NCPD_BIN $NCPD_OPTS

# Remember status and be verbose
	rc_status -v
	;;
    stop)
	echo -n "Shutting down ncpd "
	## Stop daemon with killproc(8) and if this fails
	## killproc sets the return value according to LSB.

killproc -TERM $NCPD_BIN

# Remember status and be verbose
	rc_status -v
	;;
    try-restart)
	## Do a restart only if the service was active before.
	## Note: try-restart is not (yet) part of LSB (as of 1.2)
	$0 status >/dev/null &&  $0 restart

# Remember status and be quiet
	rc_status
	;;
    restart)
	## Stop the service and regardless of whether it was
	## running or not, start it again.
	$0 stop
	$0 start

# Remember status and be quiet
	rc_status
	;;
    force-reload)
        ## Signal the daemon to reload its config. Most daemons
        ## do this on signal 1 (SIGHUP).
        ## If it does not support it, restart.

echo -n "Reload ncpd "
        # if it supports it:
        #killproc -HUP $NCPD_BIN
        #touch /var/run/FOO.pid
        #rc_status -v

# Otherwise:
        $0 stop  &&  $0 start
        rc_status
        ;;

reload)
        rc_failed 3
        rc_status -v
        ;;
    status)
	echo -n "Checking for service ncpd "
	## Check status with checkproc(8), if process is running
	## checkproc will return with exit status 0.

# Return value is slightly different for the status command:
	# 0 - service up and running
	# 1 - service dead, but /var/run/  pid  file exists
	# 2 - service dead, but /var/lock/ lock file exists
	# 3 - service not running (unused)
	# 4 - service status unknown :-(
	# 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)
	
	# NOTE: checkproc returns LSB compliant status values.
	checkproc $NCPD_BIN
	# NOTE: rc_status knows that we called this init script with
	# "status" option and adapts its messages accordingly.
	rc_status -v
	;;
    *)
	echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload}"
	exit 1
	;;
esac
rc_exit

Places

File rc.ncpd of Package plptools

Places