File freeradius-server.changes of Package freeradius-server

Overview Repositories Revisions Requests Users Attributes Meta

File freeradius-server.changes of Package freeradius-server

-------------------------------------------------------------------
Fri May 31 14:28:03 UTC 2024 - Adam Majer <adam.majer@suse.de>

- update to 3.2.4
  Configuration changes
  * Better handle backslashes in strings in the configuration files.
    If the configuration items contain backslashes, then behavior may change.
    However, the previous behavior didn't work as expected,
    and therefore is not likely to be used.
  * reject_delay no longer applies to proxied packets. All servers
    should now set reject_delay = 1 for security and scalability.
  * %{randstr:...} now returns the requested amount of data,
    instead of one too many bytes.

Feature Improvements
  * Preliminary support for TEAP.
  * Update EAP module pre_proxy checks to make them less restrictive
    This prevents the "middle box" effect from affecting future traffic.
  * Many fixes and updates for Docker images.
  * Add dpsk module. See mods-available/dpsk.
  * Print out what cause the TLS operations to be made, such as the EAP
    method name (peap, ttls, etc), or RADIUS/TLS listen / proxy socket.
  * Add auto_escape to sample SQL module config.
  * Add 'if not exists' to mysql create table queries.
  * Update dictionary.aruba; add dictionary.tplink, dictionary.alphion.
  * Allow for 'encrypt=1' attributes to be longer than 128 characters.
  * Added "radsecret" program which generates strong secrets.
    See the top of the "clients.conf" file for more information.
  * radclient now prints packets as hex when using -xxx.
  * Added "-t timeout" to radsniff. It will stop processing packets
    after <timeout> seconds.
  * Support "interface = ..." on OSX and other *BSD which have IP_BOUND_IF.
  * The detail module now has a "dates_as_integer" configuration item
    See mods-available/detail for more information.
  * Add lookback/lookforward steps and more configuration to totp.
    See mods-available/totp.
  * Add "time_since" xlat to calculate elapsed time in seconds,
    milliseconds and microseconds.
  * Support "Post-Auth-Type Challenge" in the inner tunnel.
  * Add "proxy_dedup_window". See radiusd.conf.
  * Document KRB5_CLIENT_KTNAME in the "env" section of radiusd.conf.
  * Add "dedup_key" for misbehaving supplicants. See mods-available/eap.

Bug Fixes
  * Fix corner case with empty defaults in rlm_files.
  * When we have multiple attributes of the same name, always use
    the canonical attribute.
  * Make FreeRADIUS-Server-EMA* attributes work again for home
    server exponential moving average statistics.
  * Don't send the global server stats when asked for client stats.
    They use the same attributes, so the result is confusing.
  * Fix multiple typos in MongoDB query.conf (#5130).
  * Add define for illumos. Fixes #5135.
  * Add client configuration for TLS PSK.
  * Permit originate CoA after proxying to an internal virtual server.
  * Use virtual server "default" when passed "-i" and "-p" on the command line.
  * Fix locking issues with rlm_python3.
  * The detail file reader will catch bad times in the file, and
    will not update Acct-Delay-Time with extreme values.
  * Fix issue where Message-Authenticator was calculated incorrectly
    for CoA / Disconnect ACK and NAK packets.
  * Update Python thread and error handling. Fixes #5208.
  * Fix handling of Session-State when proxying. Fixes #5288.
  * Run relevant post-proxy Fail-* section on CoA / Disconnect timeout.
  * Add "limit" section to AWS health check configurtion. Fixes 35300.
  * Use MAX in sqlite queries instead of GREATEST.
  * Fix typo in Mongo queries. Fixes #5301.
  * Fix occasional crash with bad home servers. Fixes #5308.
  * Minor bug fixes to the SQL freetds modules.
  * Fix blocking issue with RADIUS/TLS connection checks.
  * Fix run-time crash on configuration typos of %{substr ...}
    instead of %{substr:...} Fixes #5321.
  * Fix crash with TLS Status-Server requests. Fixes #5326.

-------------------------------------------------------------------
Sat Feb 17 18:11:19 UTC 2024 - Christian Boltz <suse-beta@cboltz.de>

- fix directory permissions for
  /etc/raddb/mods-config/sql/moonshot-targeted-ids/*sql*
  (boo#1220025, accidentally discovered via boo#1220024)

-------------------------------------------------------------------
Tue Feb  6 08:21:21 UTC 2024 - Marcus Meissner <meissner@suse.com>

- provides for user(radiusd), group(radiusd) and group (winbind) bsc#1219600

-------------------------------------------------------------------
Thu Aug 31 13:09:06 UTC 2023 - Adam Majer <adam.majer@suse.de>

- update to version 3.2.3 (jsc#PED-6567)
  Feature Improvements
  * Add "max_retries" for connection pools. Fixes #4908.
  * Update dictionary.ciena, dictionary.huawei, dictionary.wifialliance and
    dictionary.wispr; add dictionary.eleven.
  * You can now list "eap" in the "pre-proxy" section. If the packet contains a
    malformed EAP message, then the request will be rejected The home server
    will either reject (or discard) this packet anyways, so this change can
    only help with large proxy scenarios.
  * Show warnings if libldap is not using OpenSSL.
  * Support RADIUS/1.1. See
    https://datatracker.ietf.org/doc/draft-dekok-radext-radiusv11/ Disabled by
    default, can be enabled by passing `--with-radiusv11` to the configure
    script. For now, this is for testing interoperability.
  * Add extra sanity checks for malformed EAP attributes.
  * More TLS debugging output.
  * Clear old module instance data before HUP reload. Avoids burst memory use
    when e.g. using large data files with rlm_files.
  * `rlm_cache_redis` is now included in the freeradius-redis packages.

Bug Fixes
  * Don't leak MD contexts with OpenSSL 3.0.
  * Increase internal buffer size for TLS connections, which can help with
    high-load proxies.
  * Send Status-Server checks for TLS connections.
  * Give descriptive error if "update CoA" is used with "fake" packets, as it
    won't work. i.e. inner-tunnel and virtual home servers.
  * Many small ASAN / LSAN fixes from Jorge Pereira.
  * Close inbound RADIUS/TLS socket on TLS errors. When a home server sees a
    TLS error, it will now close the socket, so proxies do not have an open
    (but dead) TLS connection.
  * Fix mutex locking issues on inbound RADIUS/TLS connections This change
    avoids random issues with "bad record mac".
  * Improve REST encoding loop. Patch from Herwin Weststrate. Closes #4950.
  * Correctly report the LDAP group a user was found in. Fixes #3084.
  * Force correct packet type when running Post-Auth-Type. Helps with #4980.
  * Fix small leak in Client-Lost code. Patch from Terry Burton. PR #4996.
  * Fix TCP socket statistics. Closes #4990.
  * Use NAS-Port-Id instead of NAS-Port during SQL simultaneous-use checks. Helps with #5010.

Changes in version 3.2.2:

Feature Improvements

* The "configure" process now gives a much clearer report when it's finished
  * Fallback to "uname -n" on missing "hostname". Fixes #4771.
  * Export thread details in radmin "stats threads". Fixes #4770.
  * Improve queries for processing radacct into periodic usage data
  * Update dictionary.juniper.
  * Add dictionary.calix.
  * Fix dictionary.rfc6519 DS-Lite-Tunnel-Name to be "octets".
  * Update documentation for robust-proxy-accounting, and be more aggressive about sending packets.
  * Add per-module README.md files in the source.
  * Add default Visual Studio configuration for developers.
  * Postgres can now automatically use alternate queries for errors other than duplicate keys.
  * %{listen:TLS-PSK-Identity} is now set when using PSK and psk_query This
    helps the server track the identity of the client which is connecting.
  * Include thread stats in Status-Server attributes. Fixes #4870.
  * Mark rlm_unbound stable and add to packages.
  * Remove broken/unsupported Dockerfiles for centos8 and debian9.

Bug Fixes

* Preliminary support for non-blocking TLS sockets. Helps with #3501.
  * Fix support for partial certificate chains after adding reload support. Fixes #4753.
  * Fix handling of debug_condition.
  * Clean up home server states, and re-sync with the dictionaries.
  * Correct certificate order when creating TLS-* attributes Fixes #4785.
  * Update use of isalpha() etc. so broken configurations have less impact on the server.
  * Outgoing TLS sockets now set SNI correctly from the "hostname" configuration item.
  * Support Apple Homebrew on the M1. Fixes #4754.
  * Better error messages when %{listen:TLS-...} is used.
  * Getting statistics via Status-Server can now be done within a virtual server. Fixes #4868.
  * Make TTLS+MS-CHAP work with TLS 1.3. Fixes #4878.
  * Fix md5 xlat memory leak when using OpenSSL 3.0

- freeradius-server-rlm_sql_unixodbc-configure.patch: refreshed
- spec file cleanup: remove duplicate BR: from subpackages

-------------------------------------------------------------------
Mon Feb  6 16:57:33 UTC 2023 - Adam Majer <adam.majer@suse.de>

- update to version 3.2.1:
  Feature Improvements
  *  Add dictionary.ciena, dictionary.nile, and DHCPv4 dictionaries
  *  Add simultaneous-use queries for MS SQL
  *  Add radmin command for "stats pool <module-name>"
     which prints out statistics about the connection pools.
  *  Client statistics now shows "conflicts",
     to count conflicting packets.
  *  New optional "lightweight accounting-on/off" strategy.
     When refreshing queries.conf you should also add the new
     nasreload table and corresponding GRANTs to your DB schema.
  *  Add TLS-Client-Cert-X509v3-Certificate-Policies, which helps
     with Eduroam.
  *  Allow auth+acct for TCP sockets, too.
  *  Add rlm_cache_redis. See raddb/mods-available/cache for details.
  *  Allow radmin to look up home servers by name, too.
  *  Ensure that dynamic clients don't create loops on duplicates
  *  Removed rlm_sqlhpwippool. There was no documentation, no configuration,
     and the module was ~15 years old with no one using it.
  *  Marked rlm_python3 as stable.
  *  Add sigalgs_list. See raddb/mods-available/eap
  *  For rlm_linelog, when opening files in /dev, look at "permissions"
     to see whether to open them r/w.
  *  More flexibility for dynamic home servers. See
     doc/configuration/dynamic_home_servers.md and
     raddb/home_servers/README.md.
  *  Allow setting of application_name for PostgreSQL.
     See mods-available/sql.

Bug Fixes
  *  Correct test for open sessions in radacct for MS SQL.
  *  The linelog module now opens /dev/stdout in "write-only" mode
     if the permissions are set to "u+w" (0002).
  *  Various fixes to rlm_unbound from Nick Porter.
  *  PEAP now correctly runs Post-Auth-Type Accept.
  *  Create "TLS-Cert-*" for outbound Radsec, instead of
     TLS-Client-Cert-* Fixes #4698. See sites-available/tls,
     and fix_cert_order.
  *  Minor updates and fixes to CI, Dockerfiles and packaging.
  *  Fix rlm_python3 build with python >= 3.10. Fixes #4441.

Changes in version 3.2.0:
  Feature Improvements
  All features from 3.0.x are included in the 3.2.x releases.
  In addition:
  *  Add 'reset_day' and '%%r' parameter for rlm_sqlcounter to
     specify which day of the month the counter should be reset.
  *  Partial backport of rlm_json from v4, providing the json_encode
     xlat See mods-available/json for documentation.
  *  Support for haproxy "PROXY" protocol See sites-available/tls,
     "proxy_protocol" and doc/antora/modules/howto/pages/protocols/proxy/.
  *  Support for sending CoA-Request and Disconnect-Request packets
     in "reverse" down RadSec tunnels. Experimental for now,
     and undocumented.
  *  It is now possible to run a virtual server when saving / loading
     TLS cache attributes. See sites-available/tls-cache for more
     information.
  *  Removed the "cram" module. It was undocumented,
     and used old and insecure authentication methods.
  *  Remove the "otp" module. The "otpd" program it needs is
     no longer available, and the module has not been usable since
     at least 2015.
  *  All features from 3.0.x are included in the 3.2.x releases.
  *  3.2.0 requires OpenSSL 1.0.2 or greater.

Bug Fixes
  *  All bug fixes from 3.0.x are included in the 3.2.x releases, including
  *  fixes information leakage in EAP-PWD (bsc#1206204, CVE-2022-41859)
  *  fixes crash on unknown option in EAP-SIM (bsc#1206205, CVE-2022-41860)
  *  fixes crash on invalid abinary data (bsc#1206206, CVE-2022-41861)

- freeradius-server-enable-python3.patch: refreshed

-------------------------------------------------------------------
Fri Jan 13 11:06:06 UTC 2023 - Stefan Schubert <schubi@suse.com>

- Migration of PAM settings to /usr/lib/pam.d.

-------------------------------------------------------------------
Thu Sep 29 08:57:18 UTC 2022 - Michael Ströder <michael@stroeder.com>

- use chown with colon instead dot in radiusd.service

-------------------------------------------------------------------
Thu Jul 21 00:49:49 UTC 2022 - William Brown <william.brown@suse.com>

- Resolve issue with linking python3 with rlm-python

-------------------------------------------------------------------
Wed Feb  2 11:59:44 UTC 2022 - Samuel Cabrero <scabrero@suse.de>

- Remove libwbclient-devel BuildRequires in favor of
  pkgconfig(wbclient); (jsc#SLE-20577);

-------------------------------------------------------------------
Thu Oct  7 21:34:06 UTC 2021 - Michael Ströder <michael@stroeder.com>

- update to 3.0.25:
  * `correct_escapes` has been added back into the default configuration.
  * A segfault when trying to proxy to zombie home servers has been fixed.
  * A number of other small bugs and compiler warnings were fixed.
  * Added support for building with PostgreSQL 14.

-------------------------------------------------------------------
Thu Oct  7 15:02:11 UTC 2021 - Adam Majer <adam.majer@suse.de>

- Update to version 3.0.24 (jsc#SLE-21237)
  Feature Improvements
  * Add sanitizer options to configure script.
  * Log information needed by Wireshark to decode TLS sessions.
  * Allow more liberal SQL commands in rlm_sql_map.
  * Update dictionary.apc, dictionary.h3c.
  * Add new Acct-Status-Type Subsystem-On and Subsystem-Off See
    dictionary.iana and
    https://freeradius.org/rfc/acct_status_type_subsystem.html.
  * Add reject_unknown_intermediate_ca. See mods-available/eap.
  * Add dynamic loading of certificates via TLS-Session-Cert-File
    See raddb/certs/realms/README.md.
  * Add Server Name Indication (SNI) for outbound RadSec connections
    See raddb/sites-available/tls, and the home server tls
    configuration.
  * Support SNI for inbound RadSec connections. Certificates will be
    loaded from "realm_dir" in the "tls" section. SNI will be cached
    in the TLS-Server-Name-Indication attribute.
  * Preliminary support for haproxy "PROXY" protocol See sites-available/tls,
    "proxy_protocol" and doc/antora/modules/howto/pages/protocols/proxy/.
  * Generate parse errors in more circumstances when we know that
    the configuration is wrong.
  * Add "weeklycounter" to sample sqlcounter configuration.
  * Add certificate attributes to the request list, even if
    the certificates have expired.
  * The Simultaneous-Use code is now IPv6 aware, and can deal
    with NAS-IPv6-Address.
  * Add dictionary.cambium.
  * No longer logs passwords in logfiles (bsc#1184016)

Bug Fixes
  * Fix crash in trustrouter module (#4115)
  * Fix crash in state handling.
  * Don't alter global options in redhat logrotate scripts.
  * EAP-FAST will print errors and continue, rather than exiting
    when OpenSSL fails various internal sanity checks.
  * Allow admin to manually change core limits, even when core
    limits are disabled.
  * Fix chunked rlm_rest HTTP body. Closes #4131
  * Many fixes around the SQL ippool queries.conf and schema
  * Fix MySQL stored procedures. PR #4170
  * Rework connection pool management for corner cases Fixes #4161, #4162, #4163.
  * Final fix for double free in #3188.
  * Fix sqlcounter wrong memory free. PR #4192
  * Accept slow writes from proxies over TCP, which allows the server
    to make more progress when it receives partial packets.
  * Add 'weeklycounter' for rlm_sqlcounter.
  * Outbound proxying over TCP / TLS is better able to deal with
    partial TCP reads, and has fewer issues with slow networks.
  * Fix wrong data-type of Acct-Delay-Time in rlm_unix.
  * Fix EAP-FAST PAC lifetime calculation.
  * Print correct encoded packet length when debugging.

- remove python2 build
- drop references to SLE11
- freeradius-server-radiusd-logrotate.patch: upstreamed

-------------------------------------------------------------------
Sun Jun 27 15:43:02 UTC 2021 - Ferdinand Thiessen <rpm@fthiessen.de>

- Add ldap-schemas subpackage for OpenLDAP radius schemas
- Add freeradius-server-fix-perl-shbang.patch to fix RPMlint warnings
- Fix RPMlint warnings about macros and permissions

-------------------------------------------------------------------
Sat Jun 26 21:12:24 UTC 2021 - Ferdinand Thiessen <rpm@fthiessen.de>

- Update to version 3.0.23
  * Feature improvements
    * Add "set home_server state ... down" in order to mark the home
      server as administratively down.  Use "alive" to bring it back
      to life.
    * Add Post-Auth-Type "Client-Lost" which should make it easier
      to log when clients stop responding.
    * Cache TLS messages in &session-state, for more debugging.
    * Notes in eap configuration about TLS 1.0 / TLS 1.1, and setting
      cipher_list = "DEFAULT@SECLEVEL=1"
    * Added MANY warning messages about using TLS 1.3 with EAP.
  * Bug fixes
    * Fix crash in some cases when home server is down, in debug mode.
    * Fix (again) "read clients from SQL" functionality.
    * Fix sql_map to return values in more situations.
    * Silently ignore LEAP configuration instead of erroring out.
- Update to version 3.0.22
  * Feature improvements
    * Limited support for dynamic home servers.
    * Add support for prepend operator ^=.
    * Added rlm_totp, for use with the Google Authenticator app.
    * The default minimum TLS version is now TLS 1.2, as per RFC 8996.
      Older versions can be allowed by setting tls_min_version, and
      updating "cipher_list".
    * Significantly improve the readability and contents of TLS
      debug messages.
    * Allow CoA and Disconnect messages over TLS sockets.
    * Automatically set fragment size / MTU, so that PEAP/EAP-TLS
      works, and no longer requires manual changes to the configuration.
    * Allow "configurable_client_cert=yes" for EAP-TLS.
    * Add TLS 1.2 support for EAP-Fast.
    * Add ca_path_reload_interval option for tls.
    * Add "tls_min_version" to ldap module configuration.
    * Support running policies when receiving a RadSec connection.
    * Update TLS "ecdh_curve" code to allow for multiple curves.
    * Allow delta CRLs.
    * add rlm_sql_map, which can handle multiple columns from an SQL
      query.  See raddb/mods-available/sql_map.
    * New xlat for setting status of rlm_always instances and new
      resource-check example virtual server for manipulating control flow
      in unlang policies based on status of some external resource.
      Patches from Terry Burton.
    * Update radmin to show more information about the home servers
      using "show home_server list all".
    * The default configuration now replies with EAP-Key-Name, if it
      is available, and was requested.
    * Include extensions in generated certificates.
    * Ignore user-provided dhparams in FIPS mode.
    * Remove native support for Cisco LEAP.  It is insecure, and
      should not be used.  Proxying LEAP is still supported.
    * Allow use of password preparation methods with rlm_eap_pwd.
    * More RFC compliance for various corner cases of DHCP,
    * Use DHCP-specific schemas.
    * Add stored procedures for DHCP lease allocation
    * Add support for DHCP-Decline.
    * Added mods-available/dhcp_sql which is a DHCP-specific instance
      of the SQL module.
    * Treat DHCP Discover and Request differently for lease allocation times.
    * Add support for PBKDF2 keys.
    * Update default PostgreSQL schema to use "text" instead of
      a fixed-size "varchar".
    * Add radmin command "show client list verbose", which gives a lot
      more information about each client.
    * Add support for EAPS-AKA authentication to rlm_wimax.
    * Add rlm_rest support for HTTP/2.
    * Add REST-HTTP-Status-Code attribute holding HTTP status code.
    * Add option to set http_negotiation in rlm_rest.  Fixes #2821.
    * Encode / decode NAS-Filter-Rule according to RFC 4849.
    * Allow attributes using old names in configuration files, SQL,
      or modules to match attributes in the packet which use
      new names.
    * Allow querying IPv6 stats via FreeRADIUS-Stats-Client-IPv6-Address
      and FreeRADIUS-Stats-Server-IPv6-Address
    * Add warnings if there is no "real" User-Name to identify users.
    * Add sample configuration to update Stripped-User-Name and/or
      Class for user sessions. See sites-available/default
    * Add configuration to suppress printing values for User-Name, etc.
    * Support dictionary.telrad, which is also in WiMAX format.
    * PEAP 'proxy_tunneled_request_as_eap' is now configurable
      at runtime with Proxy-Tunneled-Request-As-EAP.
    * Debug output now lists client/server proposed TLS ciphers.
    * Add support for TLS1.3
  * Bug fixes
    * Fix long-term double free due to PCRE calling our "free"
      function twice.
    * Respect the "log_reject" configuration item in more places.
    * Run Post-Proxy-Type Fail... when all home servers are down.
    * Note that rlm_replicate can only use UDP, and not TCP or TLS.
    * DHCP pool lookup is now keyed by Client Identifier (Option 61)
      when supplied by client, otherwise the hardware address is used.
      Compliant with RFC 2132. This change will not affect existing
      systems on upgrade, but new installations will use the new behavior.
    * Don't print invalid tags in rlm_cache, among other places.
    * Do home_server failover immediately when an initial TCP / Radsec
      connection fails.
    * Clear error on SQLITE_BUSY to prevent memory leak in corner cases.
    * Properly add SQL clients to virtual servers.
    * Use better API when decoding DHCP packets, to avoid unnecessary work.
    * Parse locale-dependent dates.
    * Fix radiusd.conf ENV LD_PRELOAD function.
    * Make the "date" module handle UTC more consistently.
    * Check for, and complain about, inconsistent use of tls_min_version
      versus disable_tlsv1
    * Fix "read client from SQL" code so that it properly ties clients
      to a virtual server.  Also document the behavior.
    * Fix leak with unknown attributes in detail reader.
    * Fix parenting issues in rlm_yubikey.
- Drop __DATE__ __TIME__ fixes, implicitly done with source_date_epoch
  variable supported by gcc >= 7
-------------------------------------------------------------------
Mon Jan  4 12:51:06 UTC 2021 - Adam Majer <adam.majer@suse.de>

- freeradius-server-radiusd-logrotate.patch: move logrotate
  options into specific parts for each log as "global" options
  will persist past and clobber global options in the
  main logrotate config (bsc#1180525)

-------------------------------------------------------------------
Tue Dec  1 16:52:22 UTC 2020 - pgajdos@suse.com

- remove redundant definitions of apache rpm macros

-------------------------------------------------------------------
Wed Aug 26 11:32:15 UTC 2020 - Adam Majer <adam.majer@suse.de>

- freeradius-server-radiusd-logrotate.patch: fix permissions in
  logrotate global section (bsc#1170505, bsc#1174905)

-------------------------------------------------------------------
Tue Mar 24 15:31:22 UTC 2020 - Adam Majer <adam.majer@suse.de>

- update to 3.0.21 (jsc#SLE-11896)

Feature Improvements

* New stored procedure for allocating IPs with PostgreSQL
    Rates of 1500 IPs per second are now possible
    See raddb/mods-config/sql/ippool/postgresql/procedure.sql
  * Add SQL IP pool support for Microsoft SQL Server
    See raddb/mods-config/sql/ippool/mssql/
  * Added RCNTEC dictionary. Closes #3168.
  * Added Pica8 dictionary. Closes #3179.
  * Add TLS-Client-Cert-Valid-Since attribute holding not
    Before date Patch from Boris Lytochkin. Fixes #3157.
  * Generate attributes containing unknown OIDs See raddb/sites-available/tls
  * Update the WiMAX dictionary.
  * Added ability to rlm_python(Python2) show a stacktrace
    from errors. #2979.
  * Add WiFi Alliance Policy OIDs.
    See raddb/certs/xpextensions
  * radmin now shows coa stats, too.
  * Sample schema extensions for summarizing data in SQL
    See mods-config/sql/main/*/process-radacct.sql
  * Update dictionary.aerohive, dictionary.fortinet,
    dictionary.arista and dictionary.erx.
  * Added VAS Experts dictionary.
  * Many updates to RPM and jenkins builds from Matthew Newton.
  * Added %C (time now in seconds) and %c (microsecond component of now)
    back-ported from the "master" branch.
  * Add reload capability to systemd unit file in Debian and RedHat.
  * Increase timestamp precision in postauth to maximum supported by each
    database and simplify (and make more consistent between drivers)
    the timestamps in SQL queries by using expansions.
  * Option to set dictionary path in raduat script.

Bug Fixes

* Various fixes found by PVS-Studio.
  * Set permissions of certificates in bootstrap shell script Fixes #3132.
  * Increase the 'nasportid' SQL field for 'varchar(32)'. #3141.
  * Skip processing proxy reply if there are no home servers available.
  * Update SQLite IPPool queries. Fixes #3177
  * rlm_sql_unixodbc fixes. Fixes #2822.
  * Fixes when building with LibreSSL.
  * Fix the rlm_python3 build. Note that this module is experimental. #3183.
  * The rlm_python should append the 'python_path' paths in 'sys.path'.
    It fixes the expected behavior to use the existing Python modules
    Fixes #3180.
  * Fix rlm_python to print the script errors properly.
  * Bound total query time for PostgreSQL. Fixes #3253.
  * Many fixes to Oracle sqlippool. It now does 500 IPs per second
    without any tuning. Fixes #3270.
  * Reference sqlippool by it's correct name. Fixes #3272.
  * Revert 3.0.20 patch which caused crashes on duplicate clients.
  * Update WiMAX-MSK attribute. Fixes #3280.
  * Fix crash when trying to access non-existant regex capture group.
  * Use timestamps (request or server) rather than SQL NOW()
    in accounting queries so that these are stable when replayed
    from a file buffer.

- freeradius-python3_patches.patch: upstreamed

-------------------------------------------------------------------
Tue Mar 17 13:42:37 UTC 2020 - Adam Majer <adam.majer@suse.de>

- update to 3.0.20 (bsc#1146848)

Feature Improvements
  * Added Force10 dictionary.
  * Update dictionary.hp with new attributes. #2690.
  * Update dictionary.aruba with new attributes. #2696.
  * Fix side-channel leak in EAP-PWD (bsc#1144524, CVE-2019-13456)
  * Relax OpenSSL version checks, now that their API is both public, and stable.
  * Note that tls_min_version/tls_max_version also support "1.3"
    Since there is no standard yet for EAP with TLS 1.3, it will not work.
  * Added tripplite dictionary from #2760.
  * Switch to the async interface for rlm_sql_postgresql so that
    we can enforce query_timeout.
  * Added new LDAP option 'allow_dangling_group_ref'.
  * Updated documentation and functionality for EAP session caching
    See "cache" section of mods-available/eap.
  * Tighten systemd unit file security. Fixes #2637.
  * Disable TLS 1.0 and TLS 1.1 support in the default configuration
    We STRONGLY recommend doing this for all installations.
  * Add expansions for *outgoing* Radsec connections
    "%{proxy_listen:TLS-...}" for TLS-Client-Cert-* and
    TLS-Cert-* attributes. Fixes #2839.
  * Add %{listen:tls} which returns "yes" or "no" for
    TLS or non-TLS connections.
  * Update dictionary.lancom with new attributes. #2847.
  * Added rlm_sql_mongo. See raddb/mods-available/sql.
    Note that this module is experimental.
  * Added more documentation in sites-available/robust-proxy-accounting.
  * sqlippool now re-allocates unexpired leases, to prevent IP pool
    exhaustion when clients perform multiple reauthentication attempts
  * Add support to radmin keep the history in ~/.radmin_history.
  * Add support for ENV and LD_PRELOAD in radiusd.conf.
    See the new ENV sub-section of radiusd.conf.
  * Update dictionary.aptilo. #3002.
  * Update dictionary.airespace. #3039.
  * Add sites-available/coa-relay, which makes CoA easier #3045.
  * Add example stored procedure for IP Pools in MySQL
    See mods-config/sql/ippool/mysql/procedure.sql
  * Update dictionary.dhcp dictionary with the recent hardware types.
  * Add experimental rlm_python3. This should largely work
    the same as rlm_python, which was Python2 only.
  * Add Dockerfiles for Debian10 and CentOS8.
  * Add RPM spec file compatibility for RHEL/CentOS 8.
  * Notes on certificate constraints. See raddb/certs/server.cnf.
  * Add NAIRealm example to raddb/certs/server.cnf, for RFC 7585.

Bug Fixes

* Allow listen.ipaddr to reference an IPv6-only host. Fixes #2627
  * ERX-Acct-Request-Reason is "integer". Closes #2635.
  * Fix a slow memory leak in the file management code.
  * Try to fix file permissions if they get modified while
    the server is running
  * Fix slow memory leak with clients.
  * Fix request and connection timeouts in rlm_rest.
  * Fix systemd issues.
  * Fixes from clang analyzer.
  * Fix missing include for the dictionaries:
    alcatel.esam, altiga,alvarion.wimax.v2_2,aptis,asn,
    audiocodes,avaya,bristol, columbia_university,freedhcp,garderos,
    infoblox,motorola.illegal, starent.vsa1, telkom, wimax.wichorus.
  * Fix internal sanity check when running with "-Xx".
  * Allow "inner-tunnel" virtual servers to work better
    with "accept" and "reject" policies.
  * Fix dictionary.huawei data types for
    Huawei-DNS-Server-IPv6-address and Huawei-Framed-IPv6-Address.
  * Framed-Interface-ID in postgresql/queries.conf is string,
    not inet Fixes #2817.
  * Fix rlm_cache to complain on unknown attributes in the "update"
    section of its configuration.
  * Add configure checks for -latomic. This helps on armel,
    mips and mipsel. Fixes #2828.
  * Add support to Oracle 19 and 18. Via #2857.
  * Add support for decoding tags in rlm_rest. Fixes #2848.
  * Use correct passwords when updating CRLs in raddb/certs/.
  * Properly separate "originate-coa" packets when accounting
    packets are read from the detail file reader.
  * Use the correct virtual server for pre/post-proxy.
  * radsqlrelay fixes backported from "master" branch
  * Fix DoS issues due to multithreaded BN_CTX access
    (bsc#1166847, CVE-2019-17185)

- disable python2 for SLE15 and Factory
- freeradius-server-enable-python3.patch: enable Python3 module
- freeradius-python3_patches.patch: backport python3 fixes from upstream
- freeradius-server-opensslversion.patch: updated

-------------------------------------------------------------------
Wed Mar 11 13:18:37 UTC 2020 - Adam Majer <adam.majer@suse.de>

- Enable memcached driver on SLE15

-------------------------------------------------------------------
Mon Dec 23 15:06:54 UTC 2019 - Johannes Engel <jcnengel@gmail.com>

- Add missing BuildRequire on samba-core-devel required for windbind
  support in rlm_mschap.

-------------------------------------------------------------------
Wed Apr 10 17:01:55 UTC 2019 - Michael Ströder <michael@stroeder.com>

- update to 3.0.19 (jira#SLE-5890)

Feature improvements
  * Update dictionary.cisco
  * Update sqlippool to allow for stored procedures with
    PostgreSQL.  This increases performance substantially.
    Patch from Nathan Ward.  Fixes #2540.
  * Re-added "show client config" command to radmin.
  * Cleaned up mods-available/sql example so that it is
    easier to understand.
  * Added pfSense dictionary. Closes #2581
  * Update dictionary.h3c Closes #2592
  * Update elasticsearch/logstash config for v6.7.0.
  * EAP-PWD security fixes from Mathy Vanhoef. See
    http://freeradius.org/security/
    (CVE-2019-11234, CVE-2019-11235, bsc#1132549, bsc#1132664)

Bug fixes
  * Update dynamic_client module and server core so that
    the functionality works.  This has been broken since
    at least v2.
  * Fix crash in sqlippool due to escaping changes.
    Patch from Nathan Ward.  Fixes #2532, #2533.
  * Fix systemd notify, watchdog and unit files.
    Fixes #2541, #2499.
  * Fix erroneous length check in EAP-FAST.
  * Update documentation to remove old "ignore_null"
    configuration. Fixes #2578.
  * Fix default POD port. Should be 3799.  Fixes #2591
  * Correctly encode vendor-specific "encrypted" attributes.
    Fixes #2600

-------------------------------------------------------------------
Wed Feb 27 11:37:53 UTC 2019 - adam.majer@suse.de

- reformat changelog mostly by wrapping lines
- add missing bug numbers for security fixes

-------------------------------------------------------------------
Tue Feb 26 21:17:00 UTC 2019 - Michael Ströder <michael@stroeder.com>

- update to 3.0.18

* cleanup_delay can now be 30 seconds. This helps with proxies that have packet loss.
* Do-Not-Respond policies can now be set in the "post-auth" section.
* Encode / Decode ADSL Forum DHCP options.
* Fix module ordering issues. e.g. when "sqlippool" needs "sql".
  See the "instantiate" section of radiusd.conf.
* Add Big Switch dictionary. Fixes #2252.
* Add sql_session_start policy (raddb/policy.d/accounting)
  This minimizes race conditions when using Simultaneous-Use (#2257).
* For rlm_perl, all variables are now tainted by default.
  See raddb/mods-available/perl, and the "perl_flags" configuration item.
  This change should only affect people who are using variables in
  insecure ways.
* Allow "sqlcounter" module to be listed in "post-auth".
* Add support for IPv6 attributes in SQL. Fixes #2280
* The server is better at handling fail-over for outbound RadSec and
  TCP connections. Fixes #2284.
* The server is now more aggressive about retrying failed outbound
  RadSec and TCP connections. Fixes #2284.
* Add TLS-Session-Version and TLS-Session-Cipher-Suite to the "session_state" list.
* Add expansion for Radsec connections. "%{listen:TLS-...}" for
  TLS-Client-Cert-* and TLS-Cert-* attributes.
* Add notes on running "ldapsearch" using the parameters from the LDAP module.
* "ipaddr" attributes can now be cast to "integer" type attributes
  in an "update" section.
* Move main thread queue to using atomic queues. This should help
  with contention in high load scenarios.
* Add "recv_buff" setting to listeners. For more details,
  see sites-available/default.
* The sqlippool module can now use attributes other than "Pool-Name"
  to assign IP pools. The "Pool-Name" attribute is still the default.
* The "unpack" expansion can now unpack substrings.
  See mods-available/unpack for documentation and examples.
* The preprocess module now does "ciscvo_vsa_hack" for Eltex-AVPair
  Fixes #2301. Vendors SHOULD NOT USE THAT KIND OF ATTRIBUTE.
* Allow for <instance>-LDAP-UserDN. See mods-available/ldap for more information.
* Add sanitizing of control list for moonshot. Fixes #2318.
* Update rlm_sql_mysql to be compatible with MySQL 8
  Fixes https://bugs.launchpad.net/bugs/1795310.
* Allow logging of only Access-Accept or Access-Reject messages
  See radiusd.conf, "auth_accept" and "auth_reject".
* Removed Connect-Rate comparison. It was unused and broken.
* Add dictionary.infinera.
* Use OpenSSL HMAC functions instead of local ones.
* Some SQL modules can now use "auto_escape" to escape unsafe strings
  See mods-config/sql/main/mysql/queries.conf.
* Add wispr2date conversion in mods-available/date.
* Implement dictionary-based handling in rlm_python.
  Fixes #2334 See mods-available/python for details.
* Add support for SKIP LOCKED in sqlippool. This can improve performance
  by an order of magnitude or more.
  See raddb/mods-config/sql/ippool/*/queries.conf Fixes #2383
* Allow PSK and certificates at the same time Except for TLS 1.3
  which does not support that.
* Update docker scripts. Fixes #2306 Patch from Matthew Newton.
* Add crypt xlat.
* MySQL connections can now skip verifying the server certificate.
  Fixes #2481. See mods-available/sql.
* Add better mechanism to detect MariaDB (Old MySQL).
* Add RFC 7532 "bang path" support for realms Fixes #2492.
* Update dictionary.ukerna documentation. Fixes #2493.
* Add support for systemd service and watchdogs Fixes #2499.
* Check for openss/rand.h, and allow building without OpenSSL engine.
  Patch from Eneas U de Queiroz Fixes #2517.
* The default PosgtreSQL queries now use "ON CONFLICT" to better
  deal with issues. This requires PostgreSQL 9.5 or later.
  Please use a recent version of PostgreSQL, or edit the default
  queries to remove "ON CONFLICT".

BUG FIXES
* The session-state list is no longer cleaned in the inner-tunnel.
  This lets the outer Access-Reject section access session-state.
* Fix typo in lock initialization for TLS sockets Found by Sergio NNX.
* Add check for crash when home server down Fixes #2233.
* Add username key for postauth table.
* Better libpcap checks, when the header files or libraries are missing. Fixes #2245.
* Allow building with old versions of OpenSSL Fixes #2247.
* Allow non-FreeRADIUS State attributes to be used with the
  "session-state" list. i.e. State length != 16.
* Be more aggressive about cleaning up zombie children when running in debug mode.
* Use LTDL_DEEPBIND, which fixes issues with Oracle libraries
  exporting LDAP API functions.
* unlock files when asked to unlock them.
* return error instead of asserting in map code.
* Don't write 0 bytes to SSL. Fixes #2270.
* Remove "expiry_time IS NULL" from allocate_update query. Fixes #2262.
* Various dictionary cleanups and consistency checks Fixes #2281.
* rlm_python has stronger thread locking to prevent reported issues.
  Performance may be affected.
* Don't allow Message-Authenticator to overflow past the end of a large packet.
* Fix crash in sqlippool when SQL server goes away Fixes #2300.
* Typos in man pages. Patch from Nikolai Kondrashov Fixes #2303.
* Fix crash with CoA packets/ Fixes #2304.
* Fix crash in rlm_exec with CoA. Fixes #2328.
* Print errors while parsing the log config, and don't quit when
  deprecated log settings are found.
* Fix DHCP encoder xlat so that it can be used with a list of attributes.
  It previously only encoded the first member of the list,
  and now encodes all members.
* The "expr" module now skips more whitespace.
* Remove internal FreeRADIUS-Response-Delay attributes from
  attr_filter Access-Reject.
* Don't send junk to redis when maximum args reached.
* Small updates to IPv6 for accounting schema Fixes #2364.
* Fix OpenDirectory integration in rlm_mschap.
* Fix slow memory leak with dynamic clients.
* Don't artificially truncate debug output for long strings.
* Fix memory leak in EAP-PWD.
* Fix crash in "hints" file with Fall-Through = yes.
* Fix crash / timer issues with many CoA packets.
* Fix attr_filter so that it does not treat vendor attributes of
  number 26 as Vendor-Specific.
* Fix reconnect correctly in rlm_sql_mysql.
* Fix rlm_cache to properly use Cache-TTL < 0 Fixes #2485.
* Fix rare occurance of bad xlat expansion.
* Check for rare race condition when a proxy reply arrives too late.

-------------------------------------------------------------------
Wed Jul  4 14:54:50 UTC 2018 - adam.majer@suse.de

- install license as %license instead of documentation

-------------------------------------------------------------------
Tue Jun 26 18:24:21 UTC 2018 - michael@stroeder.com

- also fix ownership of /var/log/radius in systemd unit

-------------------------------------------------------------------
Tue Apr 17 22:00:15 UTC 2018 - michael@stroeder.com

- update to 3.0.17

Feature Improvements
* Add CURLOPT_CAINFO. Patch from Nicolas C #2167.
* "stats home server" now supports "src IPADDR", to specify home
  server also by source IP. Fixes #2169.
* Add Dockerfiles for a selection of common systems.
* Increase number of permitted file descriptors, for systems with many
  home servers.
* Add TLS-Client-Cert-X509v3-Extended-Key-Usage-OIDs
  Patch from Isaac Boukris. Fixes #2205.
* Update main READMEs. Patches from Matthew Newton.
* Added dictionary.mimosa.

Bug Fixes
* Don't call post-proxy twice when proxying to a virtual server.
  Matthew Newton, #2161.
* Use "raw" string value for shared secrets and dynamic clients
  It now parses strings with backslashes and "special characters"
  correctly. Fixes #2168.
* Fix RuntimeDirectory for RedHat, from Alan Buxey.
* Relax checks in 'if' parser from Isaac Bourkis.
* Minor cleanups for %{debug_attr:&request} from Isaac Boukris.
* Be more aggressive about cleaning up cached certificate attributes,
  due to deficiencies in OpenSSL. Reported by Nicolas Reich.
* Be more accepting when parsing IPv6 addresses. Bug noted by Klara Mall.
* Fix double free in rlm_sql. Fixes #2180.
* rlm_detail now writes empty Access-Accept packets.
* rlm_python can now create tagged attributes.
* Don't crash on duplicate realm + authhost / accthost
* Allow partial certificate chain to trusted CA. Fixes #2162.
* Treat SSL_read() returning zero as error. Fixes #2164.
* detail writer now checks if the file was renamed or deleted.
* Add User-Name to Access-Accept if EAP-Message exists, not Stripped-User-Name.
* RedHat Systemd updates. Fixes #2184.
* Use correct API for State variable in rlm_securid.
* Remove broken radclient option "-i".
* Fix "users" file (and hints, etc). So that it does not get confused
  about entry ordering with multiple $INCLUDEs.
* Fix rlm_sql to expand the un-escaped string, not the raw string.
* Link default and inner-tunnel only if they exist. Fixes #2206.
* Don't use both IP_PKTINFO and IP_SENDSRCADDR.
* Always install signal handler for SIGINT (needed by Docker).
* Fix intermediate CA flow for OCSP. Fixes #2160 Intermediate certs
  which are not self-signed will now be checked.
* sqlippool now returns "fail" if it fails IP allocation.
* Fix rlm_yubikey to look for correct attribute in replay attack check.

-------------------------------------------------------------------
Thu Jan 11 23:15:49 UTC 2018 - michael@stroeder.com

- update to 3.0.16

Feature improvements
* rlm_python now supports multiple lists.  From #2031.
* Add trust router re-keying.  From #2007.
* Add support for Samba / AD LDAP schema.
  See doc/schemas/ldap/samba/README.txt and
  doc/schemas/ldap/samba/
* Add "tls_min_version" and "tls_max_version" to EAP module
  for Debian OpenSSL issues.
* Better documentation for client certificates in PEAP and TTLS:
  it usually doesn't work.  Fixes #2068.
* Distinguish login failure from AD unavailable.  Fixes #2069.
* Update RH spec files.  Fixes #2070.
* Run Post-Proxy-Type if all home servers are dead.
  Fixes #2072.
* Print offending IP addresses when EAP sessions come from
  two upstream home servers, and rate-limit the messages.
* Minor packaging updates.
* Better documentation for rlm_rest.
* EAP-FAST now has it's own "cipher_list", so that it is
  easier to configure.
* EAP-FAST now forcibly disables TLS1.2, until such time
  as we implement the new keying mechanism from TLS1.2.
* Add documentation for allow_expired_crl.
* Update Debian logrotation.  #2093 and #2101.
* DHCP relay can now drop responses.  #2095.
* rlm_sqlippool can now assign Delegated-IPv6-Prefix.
  It also now can assign any IPv4 or IPv6 address.
  Based on patches from maximumG.  #2094.
  See raddb/mods-available/sqlippool for changes.
* radeapclient can now use EAP-SIM-Ki to dynamically
  create the necessary triplets.
* Explain why many LDAP connections are closed.
  Fixes #1969.
* Debian build / package issues fixed by Matthew Newton.
* dictionary.patton updates from Brice Schaffner.  Fixes #2137.
* Added scripts to build "inner-server.pem", and updated
  mods-config/inner-eap and certs/README to match.
* Added provisions for using an external CA.  See raddb/certs/
* Include dhcpclient binary in freeradius-dhcp debian packge.

Bug fixes
* Bind the lifetime of program name and python path to the module
  FR-AD-002 (redone)
* Pass correct statement length into sqlite3_prepare[_v2]
  FR-AD-003 (redone)
* Allow 100-Continue responses with additional headers in rlm_rest.
* fix corner case where detail files were not being locked
  correctly.
* Fix (SQL-Group == "%{...}") checks, and same for LDAP-Group.
  Fixes #1947
* Clean up exfile code.  Which should help to avoid issues
  with reading / writing 100's of detail files.
* Fix build for winbind.  Patch from Alex Clouter.
* Fix checkrad for Mikrotik.  Patch from Muchael Ducharme.
* Fix home server stats lookup.  Patch from Phil Mayers.
* Add libjson-c3 as an optional dependency.
* Require LTB OpenLDAP on CentOS / Redhat, to avoid linking
  against NSS, which breaks the server.  Fixes #2040.
* rlm_python fixes.  Fixes #2041
* Typos in "man" pages.  Fixes #2045
* Expand "next" in %{%{...}:-%{...}}.  Fixes #2048
* Don't add TLS attributes twice.  Fixes #2050.
* Fix memory allocation in rlm_rest.  Fixes #2051.
* Update trustrouter for new API. Fixes #2059.
* Fix SQLite issues on FreeBSD.  Fixes #2060
* Don't do debug logging of bad passwords.  Fixes #2064. (bsc#1099802)
* More graceful handling of "die" in rlm_perl.  Fixes #2073.
* Fix occasional crash when using
  cisco_accounting_username_bug = yes
* EAP-FAST fixes from Isaac Boukris.
  #2078, #2076, and #2082, #2126.
* DHCP fixes, relay, #2092, add run-time check, #2028
* Decode multiple RADIUS packets at a time in highly loaded
  RadSec connections.  Patch from Jan Tomasek.  #2106.
* TunnelPassword is not "single value" in LDAP schema.
  Fixes #2061.
* sql log now opens the expanded filename, not the input one.
  This was a regression introduced in 3.0.15.
* Remove unnecessary UNIQUE constrain in Oracle schemas.
* Fix SSL thread and locking issues when modules also use SSL.
  Fixes #2125 and #2129.
* Re-add dhcpclient "raw packet" changes.  Patches from
  Nicolas Chaigne and Matthew Newton.  Fixes #2155.

-------------------------------------------------------------------
Tue Sep 19 11:18:53 UTC 2017 - adam.majer@suse.de

- Fix permissions of radiusd.service (bnc#1053654)

-------------------------------------------------------------------
Fri Aug 25 11:32:56 UTC 2017 - varkoly@suse.com

- bsc#1055679 - freeradius-server does not provide winbind/AD auth
  Added libwbclient-devel as buildrequires

-------------------------------------------------------------------
Mon Jul 17 13:46:41 UTC 2017 - michael@stroeder.com

- update to 3.0.15 with security fixes for
  issues found via fuzzing by Guido Vranken (bsc#1049086)
  https://freeradius.org/security/fuzzer-2017.html
  * CVE-2017-10978: FR-GV-201 (v2,v3) Read / write overflow in make_secret()
  * CVE-2017-10983: FR-GV-206 (v2,v3) DHCP - Read overflow when decoding option 63
  * CVE-2017-10984: FR-GV-301 (v3) Write overflow in data2vp_wimax()
  * CVE-2017-10985: FR-GV-302 (v3) Infinite loop and memory exhaustion with 'concat' attributes
  * CVE-2017-10986: FR-GV-303 (v3) DHCP - Infinite read in dhcp_attr2vp()
  * CVE-2017-10987: FR-GV-304 (v3) DHCP - Buffer over-read in fr_dhcp_decode_suboptions()
  * CVE-2017-10988: FR-GV-305 (v3) Decode 'signed' attributes correctly
  * FR-AD-002 (v3) String lifetime issues in rlm_python
  * FR-AD-003 (v3) Incorrect statement length passed into sqlite3_prepare

-------------------------------------------------------------------
Mon May 29 12:40:52 UTC 2017 - adam.majer@suse.de

- update to 3.0.14 (still FATE#322416)
  
  Feature improvements
  * Enforce TLS client certificate expiration on session resumption,
    and Session-Timeout. See CVE-2017-9148 (bnc#1041445)
  * Updated dictionary.cisco.vpn3000, dictionary.patton
  * Added dictionary.dellemc
  * Lowered the log output for failed PEAP sessions.
  * ALlow utc in rlm_date.
  * The internal OpenSSL session cache has been disabled.
    Please see mods-available/eap
  * Update detail reader documentation.
  * Make outgoing RadSec connections non-blocking.
  * Add SQL backing to Moonshot-*-TargetedId generation.

Bug Fixes
  * radtest uses Cleartext-Password for EAP, not User-Password.
  * Update documentation for mods-enabled/ linking.
  * Enhanced checks for moonshot salt.
  * Allow session resumption for RadSec connections.
  * Update "huntgroups" file to note that port ranges are not supported
  * Fix OpenSSL permissions issues on default key files.
  * Certificates are not required when PSK is used.
  * Allow SubjectAltName as first extension in cert.
  * Fixed talloc issue with TLS session resumption.
  * "&Attr-26 := 0x01" now produces useful error messages.
  * Handle connection error in rlm_ldap_cacheable_groupobj.
  * Fix endian issues in DHCP.
  * Multiple minor fixes for Coverity complaints.
  * Handle unexpected regex.
  * Fix minor issues in dictionaries.
  * Fix typos and grammar. Patches from Alan Buxey.
  * Fix erroneous VP creation in rlm_preproces.
  * Fix MIB. Patch from Jeff Gehlbach.
  * Trust router updates from Alejandro Perez.
  * Allow build with LibreSSL.
  * Use correct packet for channel bindings.
  * Many fixes found by PVS-Studio. Thanks to PVS-Studio for giving us
    a test license. Please see the git commit history for more info.
  * Fix incorrect length check in EAP-PWD. This may be exploitable.
  * Stop rotating session database files (radutmp, radwtmp) since
    these are not logfiles.

- freeradius-server-radiusd-logrotate.patch: updated

-------------------------------------------------------------------
Mon Mar  6 23:07:21 UTC 2017 - michael@stroeder.com

- removed obsolete freeradius-server-fix-cert-bootstrap.patch
  because recent /etc/raddb/certs/bootstrap simply works
- update to 3.0.13 (still FATE#322416)

Feature improvements
  * Add dictionary.rfc7930.  Note that we do not implement
    the RFC.
  * Added 'cipher_server_preference' to mods-available/eap
    Patch from #1797.
  * OpenSSL 1.1.0 compatibility fixes.
  * rlm_perl: radiusd::xlat to evaluate xlat string
    within perl script
  * Allow authentication retry in winbind. Patch from
    Herwin Weststrate. See raddb/mods-available/mschap.
  * Added "recv-coa" method to rlm_rest.  It behaves the
    same as "authorize".
  * Document Trust Router tr_port option.  Patch from
    Stefan Paetow.
  * Update elasticsearch/logstash examples so that they work
    with elastic stack v5.  Patch from Matthew Newton.
  * Print information about packets, replies, and contents
    in the detail file reader.
  * Update abfab-tr policy.  Pull request #1893
    from Stefan Paetow.
  * Reject packets which contain User-Password and
    EAP-Message.
  * Add example for filtering Access-Challenge.
    See sites-enabled/default.
  * Pull symlink fixes from v4.0.x.  Fixes #1859.
  * Add systemd reload.  Not everything is reloaded, but
    some is.  Fixes #1662.
  * Better documentation for listen "ipaddr".  Fixes #1921
  * Add dictionary.cnergee, updated dictionary.nomadix.
  * radclient no longer needs -x to print statistics with -s.

Bug fixes
  * Minor typos.  Fixes #1763
  * Fix typo in RPM build.  Closes #1767.
  * rlm_mschap check for password expiry only
    if password was correct.  Fixes #1762.
  * Update debian build.
  * update rlm_counter "man" page.  Fixes #1775.
  * Remove erroneous assert.  Fixes #1778.
  * fix mschap password change test.  Fixes #1792.
  * Cleanup config file on data remove.  Fixes #1795.
  * passwd module returns "notfound" if not found.
  * Check for old OpenSSL, and don't build rlm_eap_fast
    if it necessary.  Fixes #1803
  * Cleanup memory better after ldap version query.
    Patch from Aleksey Katargin.
  * Rename lt_* functions to avoid linker issues with
    libtool.  Fixes #1277
  * Many miscellaneous fixes and typos.
  * Allow long strings in %{%{foo} bar:-%{baz} blah".
    Fixes #1866
  * Fix filtering operators, along with more documentation and
    more tests for them.
  * Fix OpenSSL fixes.  Fixes #1876.
  * Finish SQL select queries even when SELECT returns no rows.
    Fixes #1879.
  * Set Module-Failure-Message for more EAP errors.
  * Correct typo in dictionary.rfc5580.  Fixes #1882
  * Remove obselete systemd syslog.target.
  * Client-Port-Balance load-balancing now uses client port.
  * Radrelay examples fixed from Alex Clouter.
  * Update systemd target.  Pull request #1896.
  * Trim starting whitespace in xlat strings.
  * Get MySQL result lengths using normal API.
  * suid down after fchown().  Fixes #1914.
  * Fix cases of comparing pointer to NUL character.  Fixes #1915.
  * OpenSSL v1.1 fixes.  Pull request #1921.
  * Better Handle v4/v6 host names.  Pull request #1919.
  * Remove "Auth-Type = System" from docs and examples.
  * Don't crash on malformed %{home_server}.  Fixes #1922
  * fix erroneous use of talloc destructor in rlm_eap
  * Issue trigger modules.sql.fail.  Fixes #1923
  * Document python_path gotcha's.  Fixes #1845
  * dlopen() the specific version of Python.  Fixes #1592

-------------------------------------------------------------------
Mon Feb 20 15:27:28 CET 2017 - kukuk@suse.de

- Don't require insserv if we use systemd
- Remove require for unused fillup

-------------------------------------------------------------------
Mon Jan 30 15:46:54 UTC 2017 - adam.majer@suse.de

- Merge changes from SLE to openSUSE (FATE#322416):
  * freeradius-server-radclient-init-error-buffer.patch - make sure
    we initialize error buffer. bsc#911886: radclient error free()
    invalid pointer
  * freeradius-server-opensslversion.patch: remove OpenSSL version
    check and assume we know what we are doing. (bnc#1013311)
  * merge .changes file, mostly.
- do not attempt to detect "vulnerable" OpenSSL versions. SUSE
  security fixes do not necessarily bump version numbers as
  does upstream OpenSSL (bnc#1021375)
- do not generate certificates in %post. End-user needs to do this
  manually.
- keep FreeTDS disabled on SLE12 - we never shipped it enabled
- require OpenSSL 1.0+
- use pkgconfig(systemd) instead of plain systemd as BuildRequires
- don't list manual pages as %doc

-------------------------------------------------------------------
Sun Jan  1 13:39:57 UTC 2017 - jengelh@inai.de

- Remove --with-pic which is for static libs only.
- Use SUSE RPM group names. Trim filler words from description.
- Do not hide errors from groupadd/useradd.

-------------------------------------------------------------------
Fri Nov 18 14:48:59 UTC 2016 - adam.majer@suse.de

- Add upstream keyring
- 2 new modules: rlm_sql_freetds and rlm_eap_fast

-------------------------------------------------------------------
Thu Sep 29 20:14:34 UTC 2016 - michael@stroeder.com

- update to 3.0.12 - still fate#320481
  The focus of this release is stability.
  * Feature improvements
    + Add support for =~ and !~ in update sections. See "man unlang"
    + Add dictionary.checkpoint.
    + Simultaneous-Use prints out more information.
    + Print WARNING in debug mode when packets may be truncated.
    + Added expansions %{home_server:state} and
      %{home_server_pool:state}, which show the state of the
      server / pool.
    + Mark rlm_sql_freetds as stable.
    + Make rlm_perl less fragile. Patch from Herwin Weststrate.
    + Allow extended attributes to have "encrypt=2"
    + Update dictionary.aruba.
    + Add support for EAP-FAST. This is an isolated feature which
      does not affect anything else.
    + Update OpenSSL vulnerability list. Use a version of OpenSSL
      released after September 20, 2016.
    + EAP certificate verification is now done when "verify" is
      enabled and "ocsp" is disabled.
    + New dhcpclient and rlm_rad_counter man pages.
    + Minor abfab and moonshot additions.
    + Pass CFLAGS through from environment in RPM builds. Allows
      more custom builds.
    + Build with Heimdal in addtion to libkrb5.
  * Bug Fixes
    + Use correct typedef for older versions of sqlite.
    + Update mssql schema to add priority
    + don't complain on /dev/urandom in ldap
    + fix == operator in update sections
    + Don't create DHCP strings with many trailing zeros.
    + Allow MS-CHAP change passwords instead of complaining on
      large buffer.
    + Allow assignment or equality operator on SQL.
    + Update aclocal tests for FreeBSD 10.
    + Remove occasional hang in rlm_linelog.
    + Copy VSAs to inner tunnel for TTLS and PEAP. Fixes #1544
    + A few minor bugfixes caught in v3.1.x cleanup, and
      back-ported to v3.0.x.
    + do_not_respond again works in post-proxy
    + Allow realm "~^.*$" {} and User-Name with no realm.
    + Fix leak when creating unknown attributes
    + Fix Debian / logrotate.
    + Make OpenSSL error functions thread-safe.
    + Fix crash with rlm_sql and updating SQL-User-Name.
    + Debian build updates.
    + Allow regular expression comparisons in radclient.
    + Fix memory leak on unknown attributes in detail file reader.
    + Update example paths in "man" pages when installing them
    + Build fixes for rlm_mschap. Fixes #1489.
    + BSD build fixes. Patch from issue #1583.
    + Be more careful about /lib/ when building. Fixes #1585.
    + Correct ifdef placement error. Fixes #1572.
    + Allow for more files in internal "exfile" API So it will be
      possible to open more than 64 "detail" files at the same
      time.
    + Remove support for statically built EAP modules. Fixes #1591.
    + Many fixes to rlm_python from Guillaume Pannatier.
    + Use correct week adjustment in SQLcounter. Fixes #1608
    + Minor fixes to allow compilation without DHCP, VMPS, or TCP.
    + Fix checks for module / config file change on HUP.
    + Compile regex comparisons when sent via "debug condition".
    + Update filenames in documentation and examples.
    + Don't crash if SQL connection becomes unavailable.
    + Disallow originate_coa when proxy_requests = no.
    + Free rad_perlconf_hv in correct perl context.
    + Multiple fixes for Debian builds. #1510, among others.
    + Set OpenSSL FIPS compatibility flag when necessary.
    + Pulled fixes for the build system over from other branches.
    + Fix OCSP for RADIUS over TLS.
    + Fix skip_if_ocsp_ok behavior.
    + Better fixes for systems without closefrom() but which have
      /proc.
    + Minor build fixes back-ported from v4.0.x.
    + build --whout-ascend-binary. Fixes #1761.
    + Be more aggressive about not opening new connections in
      debug mode after CTRL-C. Address #1604.

-------------------------------------------------------------------
Fri Sep  2 12:16:56 UTC 2016 - adam.majer@suse.de

- use %{with} macro for conditional inclusions instead of hardcoding
  version numbers
- improved package descriptions
- fixed builds on SLE12 and SLE11SP4

-------------------------------------------------------------------
Mon Jan 25 18:48:55 UTC 2016 - michael@stroeder.com

- removed installation of experimental module rlm_sqlhpwippool.so
- update to 3.0.11 (fate#320481, bsc#961479, CVE-2015-8763,
  bsc#935573, CVE-2015-4680)
  * Changes of version 3.0.11
    + Feature improvements
      - "unlang" comparisons of IP addresses to IP prefixes are now
        detected, and types automatically cast.
      - Allow shorthand form of ipv4prefix values e.g. 127/8.
      - Add "auto_chain" to raddb/mods-available/eap, tls subsection.
        This allows the disabling of OpenSSL auto-chaining of
        certificates. Which might be wrong.
      - Added printing of coa and disconnect stats (radmin).
      - radclient defaults to expecting Access-Accept responses to
        Status-Server.
      - Updated dictionary.lancom, dictionary.starent.
      - Portability fixes for Solaris.
      - More errors from ntlm_auth gets passed to MS-CHAP.
      - Update abfab-tr-idp virtual server.
      - Added "filter_password" in policy.d/filter. This removes
        embedded zero bytes in User-Password, for compatibility with
        broken clients.
      - The server now issues a WARNING message if duplicate
        configuration items are found.
      - TLS can skip the "verify" section if OCSP returns OK. See
        raddb/mods-available/eap, "skip_if_ocsp_ok".
      - Set TLS-OCSP-Cert-Valid = yes / no / skipped, which is the
        result from the OCSP check.
      - Interoperate with AD and "LmCompatibiltyLevel = 5", by
        always setting WBC_MSV1_0_ALLOW_MSVCHAPV2 for native winbind
        in rlm_mschap.
      - TTLS and PEAP now require "virtual_server" to be a real
        server.
      - Print WARNING when TTLS or PEAP identities are spoofed or
        not properly anonymized. See RFC 7542 for requirements.
      - Various rlm_python fixes from Herwin Weststrate.
      - Allow setting Response-Packet-Type in "Post-Proxy-Type Fail",
        which is useful when the home server does not respond.
      - elasticsearch updates from Matthew Newton
    + Bug Fixes
      - Fix issue where field nas_type would not be accessible via
        the %{client:} xlat, for clients loaded from SQL.
      - Fix compatiblity issues with OpenSSL 1.0.2. Ignore calls to
        msg_callback with 'pseudo' content types.
      - Data type "ipv4prefix" is parsed correctly.
      - Use correct talloc context in rlm_exec. Fixes #1338.
      - Complain in unlang if "else" is used with no previous "if"
        or "elsif".
      - Send accounting status packets to the accounting port.
        Fixes #1364.
      - Print out CFLAGS when doing "radiusd -Xxv"
      - Fixed bug with coa/acct stats value #1339. Based on patch
        from Jorge Pereira.
      - Fixes for LEAP proxying. Don't use LEAP!
      - Fix issue with "directory already exists" seen when doing
        "make install".
      - Fixed bug with radmin related to the option "stats detail
        <filename>"
      - Complain if the detail file reader does not have permission
        to read the "detail.work" file. Fixes #1398
      - Fixed SoH. Attributes were not being copied to the virtual
        server.
      - Used a wrong list to global statistics in "stats".
      - Create EAP-PWD identity correctly. Prevents segfaults.
      - Dynamically validate authentication types for PEAP and
        EAP-MSCHAPv2.
      - Fix includes in installed headers.
      - OpenSSL 1.0.1f and 1.0.1g do NOT calculate TLS 1.2 keys
        correctly. See raddb/mods-available/eap, "disable_tlsv1_2"
      - Allow password change to work for MS-CHAP. This requires
        'r=0', because password changes are not retries.
      - Fix home server fail-over for home servers using TCP and/or
        RadSec.
      - Special characters in expanded regexes are now escaped e.g.
        User-Name containing '.', and comparing /%{User-Name}/, the
        '.' will now be escaped. See src/tests/keywords/regex-escape.
      - Use correct authentication vector when sending Access-Reject
        replies for RadSec.
      - Set FreeRADIUS-Proxied-To in TTLS again. You should use the
        "inner-tunnel" virtual server, instead of relying on this
        attribute.
      - Fix debugging constants in rlm_perl. Patch from Herwin
        Weststrate.
      - Add samba-dev / samba4-dev to debian builds so that
        rlm_mschap can automatically use the new winbind API.
      - Automatically skip zero-length attributes when sending
        packets, instead of erroring out.

-------------------------------------------------------------------
Mon Oct 26 12:45:59 UTC 2015 - jkeil@suse.de

- fix bsc#951404
  * Rebuild of freeradius-server package fails
  * fix source url
    - ftp://ftp.freeradius.org/pub/freeradius/
    + ftp://ftp.freeradius.org/pub/freeradius/old/

-------------------------------------------------------------------
Mon Oct  5 19:50:27 UTC 2015 - michael@stroeder.com

- update to 3.0.10
  * Changes of version 3.0.10
    + Feature improvements
      - Do more optimization of unlang policies. This makes run-time
        a bit faster.
      - Re-name most of the functions in src/lib. Third-party module
        authors will have to do the same.
      - More documentation on contributing and how to write modules.
      - Update radiusd.service for systemd.
      - Open IPv6 proxy socket if the server is listening on IPV6
        auth / acct / coa packets.
      - Create debian packages for DHCP. Fixes #1125.
      - Add more tests for "update" section parsing.
      - Update "man" pages.
      - Update attributes for Alcatel 7750
      - Add dictionary for Boingo Wi-Fi
      - Add support for DHCP lease queries.
        See raddb/sites-available/dhcp
      - On HUP, check all modules for config files which have
        changed. And only re-load those modules.
      - Allow FreeRADIUS-Response-Delay(-USec) to be set for RADIUS
        packets. Patch from Herwin Weststrate.
      - Documentation fixes from Alan Buxey and Matthew Newton.
      - Update "logrotate" script.
      - Added more RFCs to doc/rfc for new standards implemented by
        FreeRADIUS.
      - Don't crash when doing "radmin -e "help hup". Patch from
        Matthew Newton.
      - The dictionary parser now does more sanity checks, which
        prevents run-time problems with invalid attributes.
      - Update debian packages. Patches from Christopher Hoskin.
      - Many other debian packaging fixes from Matthew Netwon and
        Herwin Weststrate.
      - Add "session-state" to Perl. Patch from Herwin Weststrate.
    + Bug Fixes
      - Fix rlm_files so that there are no collisions when loading
        10's of 1000's of users.
      - Fix radclient to use our internal v4/v6 parsing functions.
        v6 addresses with ports now work correctly.
      - Fix sending/receiving packet messages to wrap v6 addresses
        in square brackets '[]'.
      - Check for sasl/sasl.h when building rlm_ldap, and disable
        SASL functionality if unavailable.
      - Fix issue which caused a non \0 terminated buffer to be
        assigned to attributes if the value being assigned contained
        an invalid escape sequence.
      - Fix deadlock when reconnecting connections in the connection
        pool.
      - Fix potential overrun in functions that used fr_utf8_char
        with a non nul terminated buffer.
      - Fix decoding issue for Tunnel-Password type attributes which
        were very long. Found by Denis Andzakovic.
      - Fix radclient issue with TCP sockets on FreeBSD.
      - The server now creates ${run_dir} and ${logdir} directories
        in daemon mode, when running as "root".
      - Handle tags when using maps. Fixes #1191.
      - Fix crash when CoA packets time out.
      - Fix parse error in rediswho
      - Fix regex support in SQL radcheck the "users" file and
        radsniff.
      - Register listen xlat earlier, so that it's available when
        the virtual servers are being parsed.
      - Parse Ascend-Data-Filter when given as "0x..."
      - Print Ascend-Data-Filter correctly. Add test cases for both.
      - Allow old-style clients again. They will be disallowed for
        3.1.0 and following.
      - Complain instead of crash when "else" and "elsif" are in the
        wrong place.
      - Clean up memory more aggressively. This lowers the maximum
        memory used, most typically for TLS based EAP methods.
      - Prevent the server from unlinking the control socket of an
        already running instance.
      - Fallback to using the configured OCSP URL if one exists, and
        no URL is provided in the certificate.
      - Return CoA-NAK if proxying CoA fails. Based on patch from
        Jorge Pereira.
      - Lower peak memory usage by decreasing size of internal
        memory pools.
      - The control socket is now left in place if a second copy of
        the server is accidentally started.
      - Allow virtual attributes in "switch", "case", etc. Fixes
        #1240 and #1265.
      - Many spell check / typo fixes in comments and example
        configuration files.
      - Better handle multiple DHCP listeners.
      - Don't print secrets for old-style realms. Fixes #1267.
      - Don't fall through in empty "case" statements. Fixes #1274.
      - Update EAP-TTLS so that MPPE keys are correctly calculated
        with TLSv1.2.
      - Always delete MS-MPPE-* from the TTLS inner tunnel. This
        allows TTLS / EAP-MSCHAPv2 to work. Fixes #1206.
      - Fix off by one error that caused some MSCHAP-Error messages
        to be sent without the password change version (V=3) and the
        textual message component (M=).
      - Always include C= V= and M= in MSCHAPv2 errors. RFC 2759
        does not say that any of these fields are optional, and not
        including V= caused errors with wpa_supplicant.
      - Do not include M= in MSCHAPv1 errors. It's not supported.

-------------------------------------------------------------------
Fri Aug  7 10:56:29 UTC 2015 - jkeil@suse.de

- Fix boo#912714: freeradius can't use ntlm_auth
  * Create winbind group
  * Add radiusd to winbind group

-------------------------------------------------------------------
Tue Aug  4 15:19:06 UTC 2015 - jkeil@suse.de

- Remove gpg signature file
  * The gpg signature checking is broken and doesn't work

-------------------------------------------------------------------
Tue Aug  4 14:28:24 UTC 2015 - jkeil@suse.de

- Fix bsc#935573: Insufficent CRL application for intermediate certificates
  * CVE-2015-4680
  * freeradius-server-CVE-2015-4680.patch based on
    https://github.com/FreeRADIUS/freeradius-server/commit/a03814af310bb3bee74ea012546d99c48b0ea5c3

-------------------------------------------------------------------
Wed Jul  8 20:05:24 UTC 2015 - michael@stroeder.com

- update to 3.0.9
  * Changes of version 3.0.9
    + Feature improvements
      - Make "pool" configurations more consistent, and update
        documentation for them.
      - Move connection pool logic to "most recently started",
        instead of MRU. This should help with pool stability.
      - More VSAs for 3GPP2
      - Added examples of multi-value attributes to rlm_perl.
      - LDAP-Group and SQL-Group attributes are now dynamically
        allocated.
      - Only the "sql" module registers SQL-Group. Other instances
        register "instance-name-SQL-Group", similarly to "ldap".
      - Unknown attributes are now complained about more often when
        used in unlang statements. e.g. if (Foo-Bar == 3) used to be
        a string to string comparison. It is now a parse error.
      - Rename RLM_COMPONENT_* to MOD_* in the code. This makes many
        things easier.
      - Move to C99 initializers for modules.
      - Load modules in raddb/mods-enabled. This allows attributes
        like "LDAP-Group" to be used in the "files" module, without
        explicit ordering or listing in "instantiate".
      - Added 'bootstrap' section to modules. Third-party modules
        will need to be updated.
      - When adding clients from a DB, add them to a virtual server
        if that virtual server has a "listen" section. Otherwise,
        add the clients to the global list.
      - When reading dynamic clients from a file, don't expire them
        if the underlying file is unchanged.
      - Allow the server to originate CoA requests from the
        post-auth stage.
      - The server creates ${run_dir} and ${logdir} in daemon mode,
        if they do not already exist.
      - Add dictionary for Wi-Fi Alliance Hotspot 2.0. The server
        now supports all mandatory and optional attributes for this
        specification.
      - HUP now re-loads the configuration only if the files have
        changed. If all files are unchanged, HUP re-opens the log
        file, and does nothing else.
      - Much better debug messages for EAP-TLS, including which
        attributes are cached, and when they are retrieved.
      - Increase default max_requests to 16384. Memory is cheap now.
      - Added "stats memory" commands to radmin. Debug build only.
      - Aptilo controller dictionary updates.
      - SQL modules now use Acct-Unique-Session-Id everywhere.
      - The redis modules are now stable.
      - The LDAP module now supports SASL "interactive bind" method.
        This allows Kerberos based administrator and user binds.
      - DHCP code is now in libfreeradius-dhcp.
      - More DHCP encoding / decoding unit tests.
      - rlm_replicate can now be listed in the "accounting" section.
      - Better sqlite debugging output.
      - Remove "required" option from many sql_ippool directives.
      - Set default CA "basic constraints" to "critical". Fixes #1073
      - Updates to help / man pages from Jorge Pereira.
      - Added more tests.
    + Bug Fixes
      - Be more careful about unused config item warnings when
        using -Xx.
      - Move more defines to be auto-generated.
      - Allow virtual servers in proxy fallback.
      - Allow %{module:} to work.
      - Don't crash in RadSec. Closes #980.
      - Return better errors when a unix group / user is not found.
      - Re-enable detail module "locking" parameter.
      - Don't crash when logging replies from Status-Server packets.
      - The couchbase module now uses "update" instead of "map", for
        consistent with the rest of the server.
        See raddb/mods-available/couchbase
      - Don't require NT-Password for MS-CHAP password changes.
      - Be a bit more careful about decrypting MS-CHAP-MPPE-Key
        attributes. Closes #1013. There is no perfect fix, tho.
      - Fix security issues with EAP-PWD.
        See http://freeradius.org/security.html#eap-pwd-2015
      - Fix dynamic clients read from SQL in non-debug mode
      - MS-CHAP now allows retries (i.e. password change) when
        passwords are expired.
      - Allow "user=radiusd" when the server is already user
        "radiusd"
      - suid up/down works on non-Linux systems. This means that the
        control socket should have the correct ownership.
      - Fix issue which caused the server to sometimes have problems
        when a home server was marked zombie.
      - Fix format.pl because Perl is now more picky.
      - Fix proxy to Packet-Dst-IP-Address, so that it uses the
        correct destination port.
      - Fix corner case with cursor functions and removal.
      - OpenDirectory fixes and documentation.
      - Fix leaks in rlm_redis.
      - RFC 6929 "evs" attributes are now encoded / decoded properly.
      - Fix talloc pool leaks when receiving malformed or
        retransmitted Accounting/CoA requests.
      - Printed attributes again use double quotes instead of single
        quotes.
      - Set X509_V_FLAG_CRL_CHECK_ALL, and add "check_all_crl" to
        eap.conf. Fixes oCert CVE-2015-4680.
      - rlm_expr now errors out correctly on malformed attribute
        references instead of triggering an assert.
      - Make "break" work in "foreach" loops
      - Allow dynamic expansions to work again in the "hints" file.
      - Correct minor typos in comments and examples from Alan Buxy.
      - Re-urlencode the path portion of ldapi:// urls before
        passing it to ldap_initialise.
- freeradius-server-rlm_sql_unixodbc-configure.patch removes
  hard-coded directory in configure script of rlm_sql_unixodbc
- install new module rlm_sqlhpwippool.so

-------------------------------------------------------------------
Thu Apr 23 14:22:17 UTC 2015 - vcizek@suse.com

- minor adjustments/cleanup of spec and changes

-------------------------------------------------------------------
Wed Apr 22 20:31:44 UTC 2015 - michael@stroeder.com

- update to 3.0.8
  * Changes of version 3.0.8
    + Feature improvements
      - Allow syslog_severity to be set in rlm_linelog.
      - Allow defaults to be set for bulk clients in LDAP and
        couchbase.
      - Updates to dhcpclient. Patches from Nicolas C.
      - rlm_mschap now supports direct connections to winbind,
        which is faster than ntlm_auth.
        See raddb/mods-available/mschap. Patch from Matthew Newton.
      - Recommend /dev/urandom for TLS randomness, instead of
        ${certdir}/random
      - Allow TLSv1 to be disabled via "disable_tlsv1" in tls{}.
      - Allow Expanded EAP types where vendor is 0 (IETF) and type
        is normal EAP type. Supplicants sending Expanded EAP types
        like this are broken.
      - Add support for server side sort controls when searching
        for user objects in rlm_ldap.
    + Bug Fixes
      - Don't complain about "authorize" in "server {}" blocks, but
        only if there's no "server" block.
      - Fix cosmetic issue where debug from the first packet read by
        a detail reader thread would be emited during config parsing.
      - Fix ASSERT on truncated detail packets.
      - Don't use main server log functions from within panic_action,
        as in the case of syslog this would cause deadlocks if the
        fault was triggered from within a malloc.
      - Fix issue in "switch" when "correct_escapes = false".
        Fixes #911.
      - Fix sqlcounter configuration to use "%%b" instead of "%b",
        otherwise the new syntax validation will fail.
      - Allow forward references in configuration items. Modules
        aren't always loaded in a sane order.
      - Fix more escaping issues. Closes #912.
      - Decode MAC addresses correctly for VMPS.
      - Fix memory leak with TLS connections.
      - Fix state machine threading issues for conflicting packets.
      - Fix copy_request_to_tunnel issues for tagged attributes.
      - Allow "ok" to over-ride "updated" inside of Auth-Type
        sections.
      - Update state machine so that post-proxy is run though child
        threads for performance, instead of blocking the main thread.
      - Allow "netmask" to work again in client definitions.
      - Relax restrictions on SQL group queries.
      - track outgoing proxy sockets and clean them up more
        aggressively.
      - track proxy statistics, including CoA and Disconnect.
      - If radmin has a connection failure when running a command,
        it re-connects and runs the command again.
      - mark home servers "unknown" less aggressively.
      - Fix potential SEGV in PostgreSQL driver on error.
      - Fix issue where fields like nas_type would not be
        accessible via the %{client:} xlat, for dynamic clients.
      - Set default busy_timeout (of 200ms) in the sqlite driver, so
        writes don't cause selects to fail in multithreaded mode.
        This is user configurable, and may be increased if required.
      - Convert Password-With-Header attributes to binary (from hex
        or base64), in the authorize method of rlm_pap.
      - Fix invalid assert in state.c, that could cause abort in
        post-auth.
      - Fix double free when -m flag is used, and connection pools
        are referenced by multiple modules.
      - RADIUS over TLS accounting uses the same port as
        authentication.
      - Regularized return codes from radmin commands.
      - Fix RHEL spec file so it works correctly for Centos7 which
        uses systemd, and didn't like the SystemV init script.
      - radwho and radlast now have a -D option to load dictionaries
      - DHCP packets are no longer checked for duplicates.
      - Don't crash in sql module group comparisons in corner case.
      - Calculate MPPE keys correctly when using TLS 1.2.
      - Fix load-balance sections. Closes #945
      - TLS certificates are available again in the post-auth
        section. They are not available for session resumption.
      - radclient encodes CHAP-Password properly when using -c
        Closes #955.
      - Fix issue in rlm_cache_memcached driver that caused variable
        length values to be truncated.
      - Fix track functionality in detail reader, so it no longer
        fails with a "Failed marking detail request as done: Bad
        file descriptor" error.
      - Actually add the peer identity (as User-Name) to the inner
        tunnel in EAP-PWD requests, so it's available for lookups.
      - Fixes to PostgreSQL queries. Patches from Santiago Gimeno.
- new set of consolidated patch files:
  deleted:
  * freeradius-server-2.1.1-logrotate_su.patch
  * freeradius-server-2.1.6-rcradiusd.patch
  * freeradius-server-initscript-pidfile.patch
  * freeradius-server-radius-reload-logrotate.patch
  * freeradius-server-var_run.patch
  added:
  * freeradius-server-radiusd-logrotate.patch
  * freeradius-server-rcradiusd.patch
  * freeradius-server-tmpfiles.patch

-------------------------------------------------------------------
Wed Jan 14 13:10:11 UTC 2015 - tchvatal@suse.com

- Do not disable as-needed build
- Remove the with_sysconfig switch and just stick with versions

-------------------------------------------------------------------
Tue Jan 13 09:42:05 UTC 2015 - vcizek@suse.com

- update to 3.0.6
  - fixes a segmentation fault in PEAP module (bnc#912588)
  Feature improvements:
  * radmin / raddebug conditional errors are printed to the output, instead of being discarded.
  * raddebug will exit if condition set with -c was invalid.
  * radmin auto-reconnects if the connection to the server has gone away.
  * rlm_cache now has submodule support. See raddb/mods-available/cache
  * New memcached driver for rlm_cache. See raddb/mods-available/cache
  * Add support for &Attribute-Name[*] in conditions. See "man unlang" for details.
  * Add &Attribute-Name[n] which gets the last instance of an attribute e.g. Module-Failure-Message[n].
  * Allow for redundant string expansions. See the "instantiate" section of radiusd.conf.
  * When checking IP addresses in conditions, make the right side be parsed as an IP prefix.
  * Support JIT compilation of compiled regular expressions when built with libpcre.
  * Support named capture groups with "%{regex:<name>}" when built with libpcre.
  * Increase regular expression capture groups from 8 to 32.
  * Emit error markers for badly formed regular expressions.
  * Allow 'm' flag to enable multiline mode in regular expressions.
  * Support limited implicit attribute conversion in update sections.
  * Support casting between IPv6 and IPv4 where the IPv6 address has the v4/v6 mapping prefix (::ffff:).

-------------------------------------------------------------------
Mon Dec 22 09:09:16 UTC 2014 - dimstar@opensuse.org

- Drop .keyring and .sig file: freeradius-server still uses MD5
  signatures, which are no longer validated/accepted by GPG 2.1.

-------------------------------------------------------------------
Wed Dec  3 14:22:03 UTC 2014 - vcizek@suse.com

- update to 3.0.5
  Some of the new features:
  * Allow LDAP to specify arbitrary attributes for dynamic
    clients.
  * Allow one level of backslashes (finally).  See radiusd.conf,
    "correct_escapes" setting.
  * When supported by OpenSSL, allow TLS 1.1 and TLS 1.2
    in EAP methods.
  * Allow multiple new connections to be spawned simultaneously
    in the connection pool, to cope with spikes in traffic.
  * Use kqueue on systems which support it.  This allows for
    better scaling when using many sockets.
  * Home server "response_window" can now take fractions of a
    second.  See proxy.conf.
  * radmin now supports "show module status", as thee counterpart
    to "set module status"
  * "ipaddr" will now use v6 if no v4 address is present.  You should
    use "ipv4addr" or "ipv6addr" to force v4/v6 addresses.
  * "client" sections will allow "ipaddr = 192.192.0/24".  The old
    "netmask" is still accepted, but the new format is preferred.
  * Allow custom HTTP headers to be set for rlm_rest requests using
    control:REST-HTTP-Header (attributes consumed after use).
  * Extend format of %{rest:} expansion to allow HTTP method and POST
    data to be specified
    and urlquoting.
  * Add support for aliases in rlm_ldap.
  * Add support for connection pool sharing to all modules that use
    the connection pool (pool = <instance>).
  * "tls" sections now have a "psk_query" configuration item, for dynamic
    queries to discover a key from a PSK identity.
  * Preliminary support for EAP channel bindings.
  * Foundational work for dynamic home servers.  They do not yet work,
    but this is now only a matter of updating the "realm" module in
    a future release.
  * Support &attr[*] syntax to copy all instances of an attribute when
    used with the += operator in an update section. May be qualified with
    a tag.
  * The logintime and expiration modules can now be listed in the
    post-auth section.  This makes some configurations simpler.
  * rlm_sqlippool is now IPV6 capable.  Set "ipv6 = yes" to get
    Framed-IPv6-Prefix returned.  The SQL queries have NOT been updated.
    Please submit patches.
  and numerous; bugfixes
- remove gpg-offline
- create /run/radiusd after install
- drop freeradius-server-opensslversion.patch (upstream)

-------------------------------------------------------------------
Mon Dec  1 10:52:28 UTC 2014 - meissner@suse.com

- freeradius-server-opensslversion.patch: do not check the minor
  version of openssl, minor versions are supposed to be compatible.
  bnc#906682

-------------------------------------------------------------------
Sun Aug  3 18:31:49 UTC 2014 - sfalken@opensuse.org

- added patch to changelog to fix factory-auto failure (Req #242825)
  added:
    freeradius-server-var_run.patch

-------------------------------------------------------------------
Mon Jul 28 12:28:44 UTC 2014 - vcizek@suse.com

- fixed SUSE spelling in a filename (bnc#889034)
  * don't install suse/README.SuSE
- remove old tarball and signature file

-------------------------------------------------------------------
Tue Jul 22 12:17:52 UTC 2014 - vcizek@suse.com

- spec run through spec-cleaner
- don't install files to /var/run

-------------------------------------------------------------------
Fri May 16 13:31:41 UTC 2014 - vcizek@suse.com

- update to 3.0.3
	Many bugfixes
	Feature improvements
	* Everything now builds with no warnings from the C compiler,
	  clang static analyzer, or cppcheck.
	* rlm_ldap now supports defining the LDAP attribute name via
	  backticked expansion (i.e. shell command) in
	  RADIUS <-> LDAP mappings.
	* rlm_ldap now supports older style generic attributes.
	* dynamic expansions (e.g. "%{expr:1 + 2}" are now parsed
	  when the server starts.  Syntax errors in the strings
	  are caught, and a descriptive error is printed.
	* Static regular expressions (e.g. /a*b/) are now parsed
	  when the server starts.  Syntax errors in the strings
	  are caught, and a descriptive error is printed.
	* dynamic expansions are cached after being parsed.  They are
	  no longer re-parsed at run-time for every request.
	* regular expressions are now parsed and cached when the server
	  starts.
	* Added the %{rest:} expansion to rlm_rest, which will send
	  a GET request to the URL passed as the format string.
	  Any body text will be written to the expansion buffer.
	* rlm_rest now available as a debian package.
	* When an 'if' condition statically evaluates to true/false,
	  unlang does more static optimization.  For examples, see
	  src/tests/keywords/if-skip
	* All modules are marked as safe for '-C', which lets the
	  dynamic expansion checks work in more situations.
	* Added 'none' and 'custom' rlm_rest body types. 'custom'
	  allows sending of arbitrary expanded text and content-type
	  headers.
	* Added "config" section to Perl.  See mods-available/perl
	* Added '%v' which expands to the server version - Patch
	  from Alan Buxey.
	* more mis-matched casts are caught in "if" conditions,
	  and descriptive errors are printed.
	* Support basic response validation in radclient. This allows
	  administrators to write local test cases for their
	  site-specific configurations.
	* Removed radconf2xml and radmin "show client config" and
	  "show home_server config".
	* Forbid running with vulnerable versions of OpenSSL.
	  See "allow_vulnerable_openssl" in the "security"
	  subsection of "radiusd.conf"
	* Catch underlying "heartbleed" problem, so that nothing bad
	  happens even when using a vulnerable version of OpenSSL.
	* Add locking API for sql_null, linelog, and detail modules,
	  which should improve performance and work around issues
	  on platforms with bad file locking.
	* Allow DHCP NAKs to be delayed, via setting
	  reply:FreeRADIUS-Response-Delay = 1
	* Allow tag and array references anywhere attributes
	  are allowed in "unlang".
	* many enhancements to radsniff, including output
	  to collectd, ipv6 support and packet loss statistics.
	* Many dictionary updates (ZTE, Brocade, Motorola).
	* rlm_yubikey now automatically splits passwords from OTP
	  strings.
	* The detail file reader is now threaded by default.
	  This should improve performance reading the files.
- dropped freeradius-server-CVE-2014-2015.patch (upstream)

-------------------------------------------------------------------
Fri Feb 28 09:04:08 UTC 2014 - vcizek@suse.com

- fix for CVE-2014-2015 (bnc#864576)
  * denial of service in rlm_pap hash processing
  * added freeradius-server-CVE-2014-2015.patch

-------------------------------------------------------------------
Wed Jan 29 13:53:30 UTC 2014 - vcizek@suse.com

- remove the old 3.0.0 sources

-------------------------------------------------------------------
Sat Jan 25 14:44:31 UTC 2014 - mardnh@gmx.de

- update to 3.0.1
    Feature improvements
    * Add "timeout" to exec, and "ntlm_auth_timeout" to mschap.
      So that run-away child processes are caught earlier.
    * Allow TLS clients to use "proto = tls", in which case
      TLS is required.  The shared secret is then set to "radsec".
    * More documentation in the tls virtual server.
    * Add "date" module for date formatting.
      See raddb/mods-available/date.
    * Added unit test suite for internal server functionality
    * When loading "update" sections, check if the RHS is a literal
      value.  If so, syntax check it immediately.
    * Update LDAP module documentation and functionality.
      The generic attribute can now update lists.
    * Updated dictionary.extreme.
    * Update sqlippool to do clears as a separate transaction,
      and at most once per second.  This should help MySQL.
    * Respect control:Response-Packet-Type for all types of
      requests.
    * Add support for SSL encryption to the MySQL driver.
    * Allow arbitrary connection parameters to be used with the
      PostgreSQL driver.
    * Changes to the OpenLDAP schema to fully expose functionality
      of the new LDAP module.
    * Update debian packaging to include a freeradius-config
      package. This package may be provided as a site local
      package to avoid fighting with the preinstalled config
      files.
    Bug fixes
    * Use correct field for ARP setting in DHCP.
    * Fix crash on debug condition (#454).
    * Fix a number of minor issues caught by the clang
      analyzer.
    * Set WARNING messages to yellow instead of normal text.
    * Correct debug colorise logic.  Patch from Phil Mayers.
    * Encode attributes of type "ethernet".  No one uses them,
      but it makes sense.
    * Work around regex initialization issues.
    * Fix build when linking against OpenSSL.
    * Print IDs as positive numbers, which helps for large DHCP
      XIDs.
    * Fix issue with sql_ippool.
    * sqlcounter now uses 64-bit counters, to deal with 4G overflow.
    * Fix issues with DHCP subsystem.
    * Don't build / install disabled modules, or their config
      files.
    * Fix build for OSX Mavericks, which hid the header files
      in a magical place.
    * Fix LEAP buffer issue.  You should still avoid LEAP.
    * Mark "unknown" WiMAX attributes as being WiMAX.
    * Fix typo in packet decoder for fragmented extended attrs
    * RPM spec fixes.
    * Fix rlm_perl build issues when not using threads.
    * Enable %{Response-Packet-Type} again.
    * Update configuration file parser to handle "bool"
      consistently.
    * Update declarations of global boolean variables to use
      "bool" consistently. This fixes an issue where some
      modules were instantiated in "config check" mode and
      did not work correctly.
    * Make more messages debug instead of info, to avoid
      polluting the logs with messages that can't be fixed.
    * Set operator in internal unlang code to suppress spurious
      warning messages.
    * Fix debian packaging.
    * Added "status" to Debian init script.
    * Fix "update outer.request" to update the outer request.
    * Don't print TLS debugging messages when not in debug mode.
    * Correctly manage counters for "limit" sections of TCP / TLS
      "listen" sockets.
    * Fix libldap debug output.
    * Fix rlm_ldap tls functionality.
    * Initialise OpenSSL globals early to avoid issues with the
      PostgreSQL library.
    * Fix typo in sqlcounter expansion code.  Fixes #463
    * Overwrite previous instances of SQL-User-Name when adding
      it to the request.
    * Work around bugs in both MIT and heimdal versions of
      krb5_copy_context(), which caused segfaults in
      multithreaded mode.
    * Provide meaningful error messages if Heimdal krb5 is used.
    * Fix attribute supression in rlm_detail.
    * Exit with error code if child fails to complete server
      initialisation after forking.  This allows init scripts to
      correctly report whether the server started ok.

-------------------------------------------------------------------
Mon Oct 21 12:06:19 UTC 2013 - vcizek@suse.com

- don't build with experimental modules
- fix packaging bugs:
  * install init scripts only on <= 11.4
  * install systemd unit
  * add %defattr for submodules

-------------------------------------------------------------------
Tue Oct 15 15:15:24 UTC 2013 - vcizek@suse.com

- update to 3.0.0
  * new feature release
  * see /usr/share/doc/packages/freeradius-server/ChangeLog
    for complete list of changes in this release
  * documentation for upgrading from 2.x is in /etc/raddb/README.rst
- drop oracle support (wasn't built anyway)
- dropped patches (obsolete):
  * freeradius-server-2.1.6-codecleanup.patch
  * freeradius-server-2.1.6-dialup_admin.patch
  * freeradius-server-2.1.1-edirectory.patch
- added systemd service unit
  * radiusd.service
- added systemd-tmpfile for /var/run/radiusd
  * freeradius-tmpfiles.conf
- added gpg-offline verification
  * freeradius-server.keyring

-------------------------------------------------------------------
Thu Sep  5 17:22:43 CEST 2013 - mls@suse.de

- add libperl_requires, as we link against libperl and thus
  need a specific version of perl

-------------------------------------------------------------------
Thu Mar 14 15:17:37 UTC 2013 - vcizek@suse.com

- fixed a bug in the logrotate script (bnc#797292)

-------------------------------------------------------------------
Mon Oct  1 11:34:31 UTC 2012 - vcizek@suse.com

- files in sites-available/ are now %config(noreplace) [bnc#781756]

-------------------------------------------------------------------
Sat Sep 10 14:20:57 UTC 2012 - vcizek@suse.com

- update to 2.2.0 
  - see /usr/share/doc/packages/freeradius-server/ChangeLog
    for complete list of changes in this release
  - fixes CVE-2012-3547 (bnc#777834)
  - dropped freeradius-server-2.1.6-overflow.patch (upstream)
  - dropped freeradius-server-sha1-default.patch (upstream)
  - refreshed freeradius-server-fix-cert-bootstrap.patch

-------------------------------------------------------------------
Mon May 28 11:47:32 UTC 2012 - vcizek@suse.com

- Use the new 'su' logrotate option (bnc#677335)

-------------------------------------------------------------------
Mon May 14 21:47:20 UTC 2012 - joop.boonen@opensuse.org

- Enable the same CFLAGS as for other hardware

-------------------------------------------------------------------
Wed Oct 19 13:55:27 UTC 2011 - vcizek@suse.com

- update to 2.1.12
    Feature improvements
	* Updates to dictionary.erx, dictionary.siemens, dictionary.starent,
	  dictionary.starent.vsa1, dictionary.zyxel, added dictionary.symbol
	* Added support for PCRE from Phil Mayers
	* Configurable file permission in rlm_linelog
	* Added "relaxed" option to rlm_attr_filter.  This copies attributes
	  if at least one match occurred.
	* Added documentation on dynamic clients.
	  See raddb/modules/dynamic_clients.
	* Added support for elliptical curve cryptography.
	  See ecdh_curve in raddb/eap.conf.
	* Added support for 802.1X MIBs in checkrad
	* Added support for %{rand:...}, which generates a uniformly
	  distributed number between 0 and the number you specify.
	* Created "man" pages for all installed commands, and documented
	  options for all commands.  Patch from John Dennis.
	* Allow radsniff to decode encrypted VSAs and CoA packets.
	  Patch from Bjorn Mork.
	* Always send Message-Authenticator in radtest. Patch from John Dennis.
	  radclient continues to be more flexible.
	* Updated Oracle schema and queries
	* Added SecurID module.  See src/modules/rlm_securid/README
    Bug fixes
	* Fix memory leak in rlm_detail
	* Fix "failed to insert event"
	* Allow virtual servers to be reloaded on HUP.
	  It no longer complains about duplicate virtual servers.
	* Fix %{string:...} expansion
	* Fix "server closed socket" loop in radmin
	* Set ownership of control socket when starting up
	* Always allow root to connect to control socket, even if
	  "uid" is set.  They're root.  They can already do anything.
	* Save all attributes in Access-Accept when proxying inner-tunnel
	  EAP-MSCHAPv2
	* Fixes for DHCP relaying.
	* Check certificate validity when using OCSP.
	* Updated Oracle "configure" script
	* Fixed typos in dictionary.alvarion
 	* WARNING on potential proxy loop.
	* Be more aggressive about clearing old requests from the
	  internal queue
	* Don't open network sockets when using -C
- freeradius-server-snprintf-overflow.patch merged in upstream

-------------------------------------------------------------------
Tue Sep 27 13:05:59 UTC 2011 - vcizek@suse.com

- fixed interaction with eDirectory (bnc#720620)

-------------------------------------------------------------------
Fri Jun 24 09:18:52 UTC 2011 - puzel@novell.com

- update to 2.1.11 
  - see /usr/share/doc/packages/freeradius-server/ChangeLog
    for complete list of changes in this release
- add freeradius-server-snprintf-overflow.patch
- use spec-cleaner

-------------------------------------------------------------------
Tue May 24 19:18:44 UTC 2011 - crrodriguez@opensuse.org

- Supress timestamps in binaries, breaks build-compare.

-------------------------------------------------------------------
Mon Oct  4 10:54:23 UTC 2010 - puzel@novell.com

- update to 2.1.10
  - see /usr/share/doc/packages/freeradius-server/ChangeLog
    for complete list of changes in this release
- drop freeradius-server-2.1.6-edir-64bit.patch (fixed upstream)

-------------------------------------------------------------------
Thu Sep 16 14:22:15 CEST 2010 - pgajdos@suse.cz

- radiusd reload after logrotate [bnc#634445]

-------------------------------------------------------------------
Mon Jun 21 19:24:08 UTC 2010 - puzel@novell.com

- update to 2.1.9 (bnc#615699)
  - bugfix release, for list of changes please see
  /usr/share/doc/packages/freeradius-server/ChangeLog

-------------------------------------------------------------------
Mon May  3 13:50:08 UTC 2010 - puzel@novell.com

- add freeradius-server-initscript-pidfile.patch
  - handle /var/run on tmpfs

-------------------------------------------------------------------
Sun Mar 21 08:43:58 UTC 2010 - puzel@novell.com

- specfile cleanup

-------------------------------------------------------------------
Thu Mar 11 12:44:18 UTC 2010 - puzel@novell.com

- drop freeradius-server-2.1.6-ltdl.patch - not needed anymore
- clean up specfile
- remove bind-libs, zlib-devel from BuildRequires - not needed

-------------------------------------------------------------------
Tue Mar  9 15:01:46 UTC 2010 - puzel@novell.com

- update to 2.1.8
 - for full list of changes, please see
   /usr/share/doc/packages/freeradius-server/ChangeLog
- drop freeradius-server-no-default-case.patch: fixed upstream

-------------------------------------------------------------------
Thu Dec 17 15:50:19 UTC 2009 - puzel@novell.com

- update to 2.1.7 
 - for full list of changes, please see
   /usr/share/doc/packages/freeradius-server/ChangeLog

-------------------------------------------------------------------
Thu Oct 22 09:05:35 UTC 2009 - puzel@novell.com

- freeradius-server-no-default-case.patch (bnc#527742)

-------------------------------------------------------------------
Thu Oct 15 09:05:18 UTC 2009 - puzel@novell.com

- freeradius-server-sha1-default.patch (bnc#546042)
- freeradius-server-fix-cert-bootstrap.patch (bnc#546041)

-------------------------------------------------------------------
Fri Jun 19 10:35:46 CEST 2009 - coolo@novell.com

- disable as-needed for this package as it fails to build with it

-------------------------------------------------------------------
Tue Jun  2 15:50:59 CEST 2009 - puzel@suse.cz

- updated to 2.1.6
  o Feature improvements
	* radclient exits with 0 on successful (accept / ack), and 1
	  otherwise (no response / reject)
	* Added support for %{sql:UPDATE ..}, and insert/delete
	  Patch from Arran Cudbard-Bell
	* Added sample "do not respond" policy.  See raddb/policy.conf
	  and raddb/sites-available/do_not_respond
	* Cleanups to Suse spec file from Norbert Wegener
	* New VSAs for Juniper from Bjorn Mork
	* Include more RFC dictionaries in the default install
	* More documentation for the WiMAX module
	* Added "chase_referrals" and "rebind" configuration to rlm_ldap.
	  This helps with Active Directory.  See raddb/modules/ldap
	* Don't load pre/post-proxy if proxying is disabled.
	* Added %{md5:...}, which returns MD5 hash in hex.
	* Added configurable "retry_interval" and "poll_interval"
	  for "detail" listeners.
	* Added "delete_mppe_keys" configuration option to rlm_wimax.
	  Apparently some WiMAX clients misbehave when they see those keys.
	* Added experimental rlm_ruby from
	  http://github.com/Antti/freeradius-server/tree/master
	* Add Tunnel attributes to ldap.attrmap
	* Enable virtual servers to be reloaded on HUP.  For now, only
	  the "authorize", "authenticate", etc. processing sections are
	  reloaded.  Clients and "listen" sections are NOT reloaded.
	* Updated "radwatch" script to be more robust.  See scripts/radwatch
	* Added certificate compatibility notes in raddb/certs/README,
	  for compatibility with different operating systems. (i.e. Windows)
  o Bug fixes
	* Minor changes to allow building without VQP.
	* Minor fixes from John Center
	* Fixed raddebug example
	* Don't crash when deleting attributes via unlang
	* Be friendlier to very fast clients
	* Updated the "detail" listener so that it only polls once,
	  and not many times in a row, leaking memory each time...
	* Update comparison for Packet-Src-IP-Address (etc.) so that
	  the operators other than '==' work.
	* Did autoconf magic to work around weird libtool bug
	* Make rlm_perl keep tags for tagged attributes in more situations
	* Update UID checking for radmin
	* Added "include_length" field for TTLS.  It's needed for RFC
	  compliance, but not (apparently) for interoperability.
  - FreeRADIUS 2.1.5
	* Release number skipped due to procedural issues.
  - FreeRADIUS 2.1.4
  o	Feature improvements
	* Permit multiple "-e" in radmin.
	* Add support for originating CoA-Request and Disconnect-Request.
	  See raddb/sites-available/originate-coa.
	* Added "lifetime" and "max_queries" to raddb/sql.conf.
	  This helps address the problem of hung SQL sockets.
	* Allow packets to be injected via radmin.  See "inject help"
	  in radmin.
	* Answer VMPS reconfirmation request.  Patch from Hermann Lauer.
	* Sample logrotate script in scripts/logrotate.freeradius
	* Add configurable poll interval for "detail" listeners
	* New "raddebug" command.  This prints debugging information from
	  a running server.  See "man raddebug.
	* Add "require_message_authenticator" configuration to home_server
	  configuration.  This makes the server add Message-Authenticator
	  to all outgoing Access-Request packets.
	* Added smsotp module, as contributed by Siemens.
	* Enabled the administration socket in the default install.
	  See raddb/sites-available/control-socket, and "man radmin"
	* Handle duplicate clients, such as with replicated or
	  load-balanced SQL servers and "readclients = yes"
  o Bug fixes
	* Clean up control sockets when they are closed, so that we don't
	  leak memory.
	* Define SUN_LEN for systems that don't have it.
	* Correct some boundary conditions in the conditional checker ("if")
	  in "unlang".  Bug noted by Arran Cudbard-Bell.
	* Work around minor building issues in gmake.  This should only
	  have affected developers.
	* Change how we manage unprivileged user/group, so that we do not
	  create control sockets owned by root.
	* Fixed more minor issues found by Coverity.
	* Allow raddb/certs/bootstrap to run when there is no "make"
	  command installed.
	* In radiusd.conf, run_dir depends on the name of the program,
	  and isn't hard-coded to "..../radiusd"
	* Check for EOF in more places in the "detail" file reader.
	* Added Freeswitch dictionary.
	* Chop ethernet frames in VMPS, rather than droppping packets.
	* Fix EAP-TLS bug.  Patch from Arnaud Ebalard
	* Don't lose string for regex-compares in the "users" file.
	* Expose more functions in rlm_sql to rlm_sqlippool, which 
	  helps on systems where RTLD_GLOBAL is off.
	* Fix typos in MySQL schemas for ippools.
	* Remove macro that was causing build issues on some platforms.
	* Fixed issues with dead home servers.  Bug noted by Chris Moules.
	* Fixed "access after free" with some dynamic clients.

-------------------------------------------------------------------
Thu Mar 26 15:58:44 CET 2009 - crrodriguez@suse.de

- do not ship static modules

-------------------------------------------------------------------
Tue Feb 10 10:38:27 CET 2009 - prusnak@suse.cz

- updated to 2.1.3
  o Feature Improvements
    * Allow running with user=radiusd and binding to secure sockets.
    * Start sending Status-Server "are you alive" messages earlier,
      which helps with proxying multiple realms to a home server.
    * Removed thread pool code from rlm_perl. It's not necessary.
    * Added example Perl configuration to raddb/modules/perl
    * Force OpenSSL to support certificates with SHA256. This seems
      to be necessary for WiMAX certs.
  o Bug Fixes
    * Fix Debian patch to allow it to build.
    * Fix potential NULL dereference in debugging mode on certain
      platforms for TTLS and PEAP inner tunnels.
    * Fix uninitialized memory in handling of vendor definitions
    * Fix parsing of quoted (but non-string) attributes in
      the users< file.
    * Initialize unknown NAS IP to 255.255.255.255, rather than 0.0.0.0
    * use SUN_LEN in control socket, to avoid truncation on some platforms.
    * Correct internal handling of debug condition to prevent it
      from being over-written.
    * Check return code of regcomp in unlang, so that invalid regular
      expressions are caught rather than mishandled.
    * Make rlm_sql use <ltdl.h>. Addresses bug #610.
    * Document list "type = status" better. Closes bug #580.
    * Set "default days" for certificates, because OpenSSL won't do it.
      This closes bug #615.
    * Reference correct list in example raddb/modules/ldap. Closes #596.
    * Increase default schema size for Acct-Session-Id to 64. Closes #540.
    * Fix use of temporary files in dialup-admin. Closes #605
      and addresses CVE-2008-4474.
    * Addressed a number of minor issues found by Coverity.
    * Added DHCP option 150 to the dictionary. Closes #618.

- removed CVE-2008-4474.patch (included in update)

- fixed buffer overflow (overflow.patch)

-------------------------------------------------------------------
Tue Feb 10 10:19:32 CET 2009 - prusnak@suse.cz

- fixed eDirectory bug on 64bit architectures (edir-64bit.patch)
  [bnc#474006]

-------------------------------------------------------------------
Fri Feb  6 15:19:04 CET 2009 - prusnak@suse.cz

- moved manpages from section 1 to utils subpackage [bnc#469682]

-------------------------------------------------------------------
Fri Jan  9 16:04:22 CET 2009 - prusnak@suse.cz

- fixed bootstraping of certificates in %post [bnc#461998]

-------------------------------------------------------------------
Thu Oct  9 11:41:06 CEST 2008 - prusnak@suse.cz

- fixed CVE-2008-4474 [bnc#433762]

-------------------------------------------------------------------
Thu Oct  9 11:37:04 CEST 2008 - prusnak@suse.cz

- updated to 2.1.1
  o Feature Improvements
    * Many more options and features are available via radmin.
      See man radmin and raddb/sites-available/control-socket.
    * Many more commands available via the control socket.
      Connect via radmin, and type help for more information.
    * Added dictionary.networkphysics and dictionary.lancom.
    * Calculate WiMAX MIP keys, and added sample WiMAX SQL tables.
  o Bug Fixes
    * Fixed bug that made radmin not work.
    * Fixed Suse && Debian package scripts.
    * Fixed issues with dynamic clients.
    * Fixed configure checks for -lreadline
    * rlm_sqlippool no longer needs to be linked to rlm_sql.
    * Add statistics for detail file listeners. This closes bug #593.
    * Fixed printing of some WiMAX attributes.
    * Fixed double free on exit() in rlm_attr_filter.
    * Fixed build issues on Solaris.
    * Fixed fast session resumption for EAP-TLS.

-------------------------------------------------------------------
Mon Sep 15 12:37:31 CEST 2008 - ro@suse.de

- make radrelay a hardlink to radiusday (instead of identical copy)

-------------------------------------------------------------------
Tue Sep  9 19:49:08 CEST 2008 - prusnak@suse.cz

- updated to 2.1.0
  o Feature Improvements
    * Clients may now be defined dynamically, based on IP address.
      See raddb/sites-available/dynamic-clients.
    * SNMP support is now available through an experimental Perl script.
      See scripts/snmp-proxy/README
    * SNMP statistics are also available through Status-Server packets.
      See raddb/sites-available/status
    * Added more Microsoft attributes from bug #568.
    * The linelog module has more functionality and flexibility.
      See raddb/modules/linelog.
    * The debugging output has been sanitized. It should be much more
      readable.
    * Debug logs can now be turned on/off while the server is running,
      for a user, group, realm, etc. See the log section of raddb/radiusd.conf.
    * Added support for WiMAX Forum attributes. The dynamic keys are
      not yet calculated. See share/dictionary.wimax
    * Added session resumption for PEAP and TTLS.
      See raddb/eap.conf, and the cache sub-section.
    * Added radmin command-line tool for administering a running server.
      See man radmin and raddb/sites-available/control-socket.
  o Bug Fixes
    * Double escaping of '\\' in the users (and some other) files
      has been fixed. If you have '\\' in the users file, your
      configuration will need to be checked, and fixed!
    * Parse security section of radiusd.conf. This was accidentally
      deleted in 2.0.5. Closes bug #566.
    * Bind to interface before IP, which allows DHCP sockets to listen
      on "*" for multiple interfaces.
    * Fix handling of giaddr in DHCP responses.
    * Corrected parsing of status_check in home_server so that it works.
    * Fix hints so that "Puser" works again.
    * Removed length restrictions on attribute names in the dictionaries.
    * Update socket code to avoid C compiler optimizations.

-------------------------------------------------------------------
Thu Aug 28 01:31:33 CEST 2008 - ro@suse.de

- remove deprecated startvar from fillup_and_insserv call

-------------------------------------------------------------------
Tue Aug 26 12:01:12 CEST 2008 - pth@suse.de

- Fix Required-Stop in init scripts.

-------------------------------------------------------------------
Wed Jul 23 11:06:13 CEST 2008 - prusnak@suse.cz

- updated to 2.0.5
    Feature improvements
    * Permit SQL authorize_reply_query to be empty.
    * Allow setting response packet type in Post-Proxy-Type Fail
      handler.
    * Added install-chown target to set correct permission and ownership
      make RADMIN=radmin RGROUP=radius install-chown
    * Support for LDAP-Group and other dynamic comparison attributes
      in unlang.  Developed from a patch by Jason Alderfer.
    * Added chroot support.  See radiusd.conf for comments.
    * Allow clients of 0/0.  We do not recommend using this, though.
    * Moved many module configurations into raddb/modules/*
    
    Bug fixes
    * Allow proxying to virtual servers for accounting packets, too.
    * Added "num fields" function to PostgreSQL client.
    * Updated proxy fallback mechanism to validate fallback servers,
      and to process fallback requests in a child thread.
    * rlm_realm returns "ok" for LOCAL realms, not "noop".
    * Fixed some DHCP code handling.  The examples should now work.

- updated to 2.0.4
    Feature improvements
    * Allow "virtual_server" in "realm" and "home_server" sections.
      See raddb/proxy.conf and raddb/sites-available/virtual.example.com.
    * Allow "passwd" module to be listed in "accounting" and "post-auth".
    * Added "fallback" to "home_server_pool" configuration, to handle
      the case of all home servers being dead.  See raddb/proxy.conf.
    * Added sample text to raddb/sites-available/inner-tunnel which
      can simplify debugging of inner tunnel configurations.
    * Added regular expression matching in realm names.  See
      raddb/proxy.conf for examples.
    * Added simple DHCP server functionality.  For comments, see
      raddb/sites-available/dhcp.
    * Added file globbing capabilities to detail file reader
    * Added sample raddb/sites-available/robust-proxy-accounting
    * Clients in SQL can now refer to a virtual server.
      Patch from Michael Bretterklieber.
    * Added some examples of creating RADIUS administrator in SQL,
      and assigning appropriate access rights.
    
    Bug fixes
    * Install all files in raddb/sites-available
    * Allow non-threaded builds.
    * Don't treat '0x' as special for known attributes that are not
      of type "octets".
    * Fix log error in rlm_pap.
    * Remove documentation about non-existent functionality.
    * Updated warning messages in debug output.
    * Fix handling of timeouts in rlm_ldap that affected 64-bit systems.
      This fix was supposed to go into 2.0.3, but did not make it.
    * Fix event handling in debug mode for failed proxy requests.
    * Fix memleak in fifos.  Closes #537.
    * Fix memleak on blocked threads.  Closes #538.
    * Perform additional checks on NULL realms.  Closes #541.
    * Fix handling of "clients" in "listen" section.
    * When detail file cannot process a packet, sleep for longer
      to let the rest of the server do something.
    * Add missing table to raddb/sql/mssql/schema.sql.  Closes #545.
    * Updated rlm_sql_postgresql to build with PostgreSQL 7.x.
      Closes #533.
    * Fix "postauth" of rlm_ldap to look for LDAP-UserDn in the
      correct place.
    * Update rlm_attr_filter for some corner cases.  Closes #543.
    * Fixed memory leak in libfreeradius event handler.
    * In the SQL Accounting on/off queries, remove the restriction
      that the session time had to be zero.

- dropped obsoleted patches
  * event-fifo-threads.patch (included in update)
  * raddb.patch (no longer needed)

- added logrotate to Recommends

-------------------------------------------------------------------
Tue May 13 18:25:19 CEST 2008 - prusnak@suse.cz

- fix crashes in events, fifo and threads (event-fifo-threads.patch)

-------------------------------------------------------------------
Mon May  5 15:02:10 CEST 2008 - pth@suse.de

- Fix coding errors that made the package fail to build.

-------------------------------------------------------------------
Wed Mar 19 17:23:48 CET 2008 - prusnak@suse.cz

- updated to 2.0.3
    Feature improvements
    * Updated raddb/certs/ca.cnf with extensions to allow ca.der
      to be imported as a CA on Symbian and Windows Mobile devices.
      Closes bug #524
    * Enable multiple matches in "hints" via Fall-Through = Yes.
      Closes bug #477
    * Added preliminary SQLite driver, contibuted by Apple.
      Untested, with no sample configuration.  This address bug #470.
    * Updated logging sub-system so that log messages from libfreeradius
      can go to the log file, and not stdout.
    * Added dictionary.rfc5176
    * EAP module now checks for instance name, and uses that for
      authentication.  This avoids the need to set Auth-Type when
      there are multiple instances of the EAP module.
    * Added Module-Return-Code attribute, which contains the value
      returned by the previous module (ok/fail/update/etc.)
    Bug fixes
    * Corrected typos in rlm_dbm.  Closes bugs #521 and #522.
    * Detail file "listen" sections now work much better.
    * Don't allow old "log_*" to over-ride new format.  Closes bug #525
    * Initialize allocated memory in Oracle SQL driver.  This fixes
      occasional crashes on some systems.  Closes bug #518
    * Call correct function in rlm_protocol_filter.  This enables the
      module to build.  Closes bug #512.
    * Added deprecated flag to build for rlm_krb5.  This allows it to
      run on 64-bit systems.  Closes bug #491
    * Corrected error message when parsing invalid configurations
      so it doesn't crash.  Closes bug #527
    * Fix handling of timeouts in rlm_ldap that affected 64-bit systems.
    * Handle $INCLUDE's in "instantiate" section.  Closes #528.
    * Format updates to "man" pages from Stephen Gran.

- updated to 2.0.2
    Feature improvements
    * Added notes on how to debug the server in radiusd.conf
    * Moved all "log_*" in radiusd.conf to log{} section.
      The old configurations are still accepted, though.
    * Added ca.der target in raddb/certs/Makefile.  This is
      needed for importing CA certs into Windows.
    * Added ability send raw attributes via "Raw-Attribute = 0x0102..."
      This is available only debug builds.  It can be used
      to create invalid packets! Use it with care.
    * Permit "unlang" policies inside of Auth-Type{} sub-sections
      of the authenticate{} section.  This makes some policies easier
      to implement.
    * "listen" sections can now have "type = proxy".  This lets you
      control which IP is used for sending proxied requests.
    * Added note on SSL performance to raddb/certs/README
    Bug fixes
    * Fixed reading of "detail" files.
    * Allow inner EAP tunneled sessions to be proxied.
    * Corrected MySQL schemas
    * syslog now works in log{} section.
    * Corrected typo in raddb/certs/client.cnf
    * Updated raddb/sites-available/proxy-inner-tunnel to
      permit authentication to work.
    * Ignore zero-length attributes in received packets.
    * Correct memcpy when dealing with unknown attributes.
    * Corrected debugging messages in attr_rewrite.
    * Corrected generation of State attribute in EAP.  This
      fixes the "failed to remember handler" issues.
    * Fall back to DEFAULT realm if no realm was found.
      Based on a patch from Vincent Magnin.
    * Updated example raddb/sites-available/proxy-inner-tunnel
    * Corrected behavior of attr_filter to match documentation.
      This is NOT backwards compatible with previous versions!
      See "man rlm_attr_filter" for details.

- dropped patches:
  * conf_read.patch (included in update)
  * strncat.patch (obsoleted by update)

-------------------------------------------------------------------
Tue Jan 29 14:33:35 CET 2008 - prusnak@suse.cz

- replace obsoleted call to conf_read with cf_file_read (conf_read.patch)
- split off -doc subpackage

-------------------------------------------------------------------
Thu Jan 24 16:39:37 CET 2008 - prusnak@suse.cz

- fix strncat usage (strncat.patch)

-------------------------------------------------------------------
Tue Jan 22 16:23:12 CET 2008 - prusnak@suse.cz

- updated to 2.0.1
  * improve unlang
  * update acct_module
  * fix parsing of syslog logging
  * minor fixes over 2.0.0

-------------------------------------------------------------------
Tue Jan 22 13:58:25 CET 2008 - prusnak@suse.cz

- renamed to freeradius-server (to follow upstream change)
- updated to 2.0.0:
  o Feature improvements
    * Debugging mode is much clearer and easier to read.
    * A new policy language makes many configurations trivial.
      See "man unlang" for a complete description.
    * Virtual servers are now supported.  This permits clear separation
      of policies.  See raddb/sites-available/README
    * EAP-TLS (PEAP, EAP-TTLS) and OpenSSL certificates "just work".
      See raddb/certs/README for details.
    * Proxying is much more configurable than before.
      See proxy.conf for documentation on pools, and new config items.
    * Full support for IPv6.
    * Much more complete support for the RADIUS SNMP MIBs.
    * HUP now works.  Only some modules are re-loaded,
      and the server configuation is *not* reloaded.
    * "check config" option now works.  See "man radiusd"
    * radrelay functionality is now included in the server core.
      See raddb/sites-available/copy-acct-to-home-server
    * VMPS support.  It is minimal, but functional.
    * Cleaned up internal API's and names, including library names.
  o Bug fixes
    * Many.
- removed obsolete patch:
  * type_punning.patch

-------------------------------------------------------------------
Tue Dec  4 18:08:41 CET 2007 - prusnak@suse.cz

- remove openldap2 from BuildRequires

-------------------------------------------------------------------
Tue Nov  6 13:16:58 CET 2007 - prusnak@suse.cz

- updated to 1.1.7
    Feature Improvements
    * Updated LDAP documentation.
    * Added note on DH parameters in eap.conf, and debugging messages
      which complain if DH is used, but not configured properly.
    * Updated the Mikrotik dictionary. Added a note that the sample
      dictionary they supply is broken.
    * Output more information on blocked threads, which should help
      narrow down which modules is causing the problem.
    * Added more eDirectory support.
    * rlm_ldap now prints out attributes in the standard format
    * Enabled server-side handling of procedures in MySQL
    Bug Fixes
    * Added NT-Hash support for mschap_xlat.
    * Corrected documentation to point to correct location of files.
    * Checks for more recent FreeBSD versions.
    * uses -DLDAP_DEPRECATED to avoid OpenLDAP crashes.
    * Use correct value for authentication name in rlm_mschap.
    * Fix over-ride for usernames when use_tunneled_reply = yes.

-------------------------------------------------------------------
Fri Apr 20 15:10:28 CEST 2007 - pth@suse.de

- Update to 1.1.6. Changes since 1.1.3:
    Feature improvements
    * Added dictionary.rfc4372 (Chargeable User Identity)
    * Added dictionary.rfc4675 (VLAN and Priority)
    * Added dictionary.rfc4679 (ADSL Forum)
      NOTE some name differences from the RFC, due to dictionary.redback
    * Updated rlm_python to something usable
    * Added experimental sql "HPW" IPPools.
    * Added more dictionaries
    * Dictionary files now MUST NOT be globally writable.
    * Configuration files now MUST NOT be globally readable,
      or globally writable.
    * Be more aggressive about freeing memory on clean exit.
      This helps track down run-time leaks.
    * Updated rlm_python to something usable
    * Added experimental sql "HPW" IPPools.
    * Major enhancements to rlm_pap, that make "encryption_scheme"
      a thing of the past.  See "man rlm_pap" for details.
    * Added SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS flag to use
      work-arounds that enable Windows Vista clients to work.
    * Added preliminary code to support Firebird.
      Use at your own risk!
    * Send MS-CHAP2-Success, which makes EAP-TTLS/MSCHAP work on more
      platforms.
    * Add a new "reply-name" directive in rlm_sqlcounter to define the
      name of the reply attribute.
    * Added more dictionaries and attributes
    * Print ntlm_auth failure reason in Module-Failure-Message
    * radsqlrelay is able to get the DB password from a file instead
      of command line.

Bug fixes
    * Corrected typo in rlm_pap.c
    * Corrected typo in src/main/auth.c
    * Suppress SSL error messages if error is zero.
    * Don't complain about "Error in read client certificate A"
      if we expect to read it in the next packet.  Fix based on patch
      by Dan Lukes.
    * Corrected nearly 30 bugs found by Coverity
      See also http://scan.coverity.com
    * Don't die on HUP.  Instead leak memory (sorry).  After a few
      hundred HUP's, the server will have leaked a few megabytes of
      memory, and you should probably re-start it.  It's ugly, but
      better than dying.
    * Corrected a few double free's
    * Corrected typo in radrelay, which prevented it from working
    * Made Firebird module build
    * Fixed bug in PostgreSQL module that caused server crash.
    * Fixed bug in SQL module that could cause server to crash.
    * Corrected base64 decoding in rlm_pap
    * Don't retransmit accounting packets.  The NAS should do this.
    * Handle Client-Error in EAP-SIM.
    * Port OpenSSL locking fixes from CVS head.  This makes PEAP
      more stable on some systems.
    * Require Message-Authenticator in Status-Server packets
    * Correct Tunnel-Medium-Type VALUEs in dictionary.rfc2868
    * Be more aggressibe about freeing memory on clean exit.
      This isn't strictly a bug fix, but it makes it easier to
      find memory leaks
    * Increase buffer size for dynamic expansion, which allows
      longer SQL qeuries.
    * Use correct line number when there's a parse error in one
      of the configuration sections.
    * Terminate SSL sessions in EAP on error, rather than continuing
      in some cases.
    * Increase buffer size to allow parsing of long octet strings
    * Fix string termination on xlat in rlm_perl
    * Fix a parse error in the digest module, where malformed
      digest requests would result in the user being accepted.  Oops...
    * VALUEs can only be defined for 'integer', to catch mistakes
      with setting VALUEs for type 'string'.
    * Better parsing of VALUE names, so that values starting with
      a digit work correctly.
    * Check return from malloc.
    * Fix a double free() in rlm_eap_tls.c
    * Check return code of malloc() during initialization.
    * Fix a corner case where the proxy port isn't set either in
      radiusd.conf or in proxy.conf.

-------------------------------------------------------------------
Mon Mar 26 12:45:29 CEST 2007 - rguenther@suse.de

- add gdbm-devel BuildRequires

-------------------------------------------------------------------
Sun Feb 11 18:33:47 CET 2007 - ro@suse.de

- one oversight in last change, build tested

-------------------------------------------------------------------
Sun Feb 11 12:00:25 CET 2007 - ro@suse.de

- fix build as non-root

-------------------------------------------------------------------
Mon Sep  4 11:18:59 CEST 2006 - kukuk@suse.de

- Make sure that pam_nologin.so will always be executed.

-------------------------------------------------------------------
Wed Aug 23 20:34:55 CEST 2006 - stark@suse.de

- update to version 1.1.3
  * autoconf updates
  * More dictionary updates
  * Security and portability fixes to rlm_otp
  * Miscellaneous bug fixes

-------------------------------------------------------------------
Mon Jun  5 22:31:04 CEST 2006 - stark@suse.de

- update to version 1.1.2
  * Allow tagged VSA's for Juniper.
  * Allow Ascend "abinary" format to be specified as octets,
    (e.g. Ascend-Data-Filter = 0x010203...)
  * Added "cipher_list" configuration to the EAP-TLS module.
    See "eap.conf" and "man 1 cipher" for details.
  * Added "check_cert_issuer" configuration to the EAP-TLS module.
    See "eap.conf" for details.
  * Added "suppress" configuration entry to rlm_detail,
    to suppress certain attributes (e.g. User-Password).
  * Write SSL errors to log file, rather than stderr.
  * Allow a core dump on uid change on Linux
  * Bugfixes

-------------------------------------------------------------------
Wed May 24 15:58:41 CEST 2006 - schwab@suse.de

- Don't strip binaries.

-------------------------------------------------------------------
Tue Mar 28 20:22:34 CEST 2006 - stark@suse.de

- fixed an error on x86_64 machines when reading dictionaries
  (#161503)
- make "use_tunneled_reply" work properly for PEAP

-------------------------------------------------------------------
Mon Mar 27 14:32:09 CEST 2006 - ro@suse.de

- also use fPIC on s390*

-------------------------------------------------------------------
Thu Mar 23 20:39:02 CET 2006 - stark@suse.de

- fixed validation issue with the EAP-MSCHAPv2 module (#160249)

-------------------------------------------------------------------
Wed Jan 25 21:36:01 CET 2006 - mls@suse.de

- converted neededforbuild to BuildRequires

-------------------------------------------------------------------
Fri Jan 20 18:19:32 CET 2006 - stark@suse.de

- fixed directory permissions (#141153)

-------------------------------------------------------------------
Thu Jan 19 01:23:36 CET 2006 - ro@suse.de

- changed php requires to generic ones (for php5)

-------------------------------------------------------------------
Sat Jan 14 16:40:53 CET 2006 - stark@suse.de

- use --with-udpfromto useful for systems with multiple addresses

-------------------------------------------------------------------
Thu Jan 12 22:48:30 CET 2006 - stark@suse.de

- update to version 1.1.0

-------------------------------------------------------------------
Wed Jan 11 16:03:44 CET 2006 - stark@suse.de

- adding stack-protector to CFLAGS
- don't package *.la files for now (#141207)

-------------------------------------------------------------------
Wed Dec 21 10:14:01 CET 2005 - stark@suse.de

- fixed realloc() in rlm_pam

-------------------------------------------------------------------
Tue Nov 15 21:49:18 CET 2005 - stark@suse.de

- moved dialup_admin to subpackage and integrate it into
  Apache 2 configuration

-------------------------------------------------------------------
Mon Sep 26 01:35:29 CEST 2005 - ro@suse.de

- added LDAP_DEPRECATED to CFLAGS

-------------------------------------------------------------------
Fri Sep 23 06:09:08 CEST 2005 - stark@suse.de

- update to version 1.0.5
- updated eDirectory integration documentation

-------------------------------------------------------------------
Fri Sep 23 01:38:53 CEST 2005 - ro@suse.de

- fix build-dir references in .la files

-------------------------------------------------------------------
Tue Aug 30 12:50:30 CEST 2005 - stark@suse.de

- fixed some issues from security audit (#104195)
  (is already upstream for 1.0.5 release)

-------------------------------------------------------------------
Mon Aug 15 19:34:18 CEST 2005 - stark@suse.de

- fix mysql creation script (#104752)

-------------------------------------------------------------------
Sat Jun 18 19:37:56 CEST 2005 - stark@suse.de

- update to version 1.0.4

-------------------------------------------------------------------
Sun Jun  5 00:36:51 CEST 2005 - stark@suse.de

- update to version 1.0.3
- link radiusd with -pie

-------------------------------------------------------------------
Mon Apr 11 11:29:05 CEST 2005 - stark@suse.de

- start daemon correctly (#75979)
- fixed packaging on x86-64 (#75979)

-------------------------------------------------------------------
Wed Mar  2 07:19:27 CET 2005 - stark@suse.de

- com_err.h patch not needed anymore
- modified spec-file to work with older distributions

-------------------------------------------------------------------
Fri Feb 18 11:05:35 CET 2005 - stark@suse.de

- enabled eDirectory support and added documentation

-------------------------------------------------------------------
Thu Feb 17 08:34:12 CET 2005 - stark@suse.de

- update to 1.0.2

-------------------------------------------------------------------
Sat Nov 27 13:44:09 CET 2004 - stark@suse.de

- fixed installation of radeapclient (#48549)

-------------------------------------------------------------------
Sat Nov 20 12:57:22 CET 2004 - stark@suse.de

- don't use heimdal for distributions newer than 9.2

-------------------------------------------------------------------
Mon Nov 15 14:53:25 CET 2004 - kukuk@suse.de

- Use common-* PAM configuration

-------------------------------------------------------------------
Sat Oct 23 20:53:51 CEST 2004 - stark@suse.de

- update to version 1.0.1
- moved *.la files to devel package

-------------------------------------------------------------------
Sat Aug 28 13:33:35 CEST 2004 - stark@suse.de

- modify logrotate config (#44436)

-------------------------------------------------------------------
Tue Aug 17 23:55:38 CEST 2004 - sndirsch@suse.de

- fixed syntax error (Typo?) in init script

-------------------------------------------------------------------
Fri Aug 13 07:10:34 CEST 2004 - stark@suse.de

- added some sample scripts to documentation

-------------------------------------------------------------------
Tue Aug 10 09:35:03 CEST 2004 - stark@suse.de

- update to 1.0.0

-------------------------------------------------------------------
Thu Jun 24 00:03:59 CEST 2004 - ro@suse.de

- update to 1.0.0pre3 (version set as 0.9.9)

-------------------------------------------------------------------
Thu Feb  5 13:36:54 CET 2004 - stark@suse.de

- disabled rlm_sql_iodbc and enabled rlm_sql_unixodb

-------------------------------------------------------------------
Fri Jan 16 13:38:13 CET 2004 - kukuk@suse.de

- Add pam-devel to neededforbuild

-------------------------------------------------------------------
Mon Jan 12 10:26:25 CET 2004 - adrian@suse.de

- add %defattr

-------------------------------------------------------------------
Fri Nov 28 06:56:46 CET 2003 - stark@suse.de

- security update to 0.9.3
  * Fix a remote DoS and possible exploit due to mis-handling
    of tagged attributes, and Tunnel-Password attribute.

-------------------------------------------------------------------
Thu Oct 16 09:02:57 CEST 2003 - stark@suse.de

- update to 0.9.2
   (see /usr/share/doc/packages/freeradius/ChangeLog)

-------------------------------------------------------------------
Fri Aug  1 16:02:14 CEST 2003 - ro@suse.de

- fix include path for com_err.h

-------------------------------------------------------------------
Thu Jul 31 06:18:03 CEST 2003 - stark@suse.de

- use stop/restart macros

-------------------------------------------------------------------
Wed Jul 23 10:53:20 CEST 2003 - stark@suse.de

- use special user for running radiusd
- modify default configuration to work without changes
  (Auth-Type = Local)
- added README.SuSE explaining about radiusd user

-------------------------------------------------------------------
Mon Jul 21 08:56:54 CEST 2003 - stark@suse.de

- update to 0.9.0
- build against libiodbc to enable iodbc module

-------------------------------------------------------------------
Wed Jun  4 19:47:02 CEST 2003 - schwab@suse.de

- Add db-devel to neededforbuild.
- Don't use system libtool.
- Fix use of sort.
- Avoid running autoconf.

-------------------------------------------------------------------
Tue Apr 15 23:46:08 CEST 2003 - ro@suse.de

- fixed neededforbuild

-------------------------------------------------------------------
Mon Mar  3 18:20:50 CET 2003 - kukuk@suse.de

- removed %ghost stuff from filelist

-------------------------------------------------------------------
Fri Feb  7 13:31:05 CET 2003 - kukuk@suse.de

- Use pam_unix2.so instead of pam_unix.so

-------------------------------------------------------------------
Wed Jan 15 15:53:21 CET 2003 - ro@suse.de

- use sasl2

-------------------------------------------------------------------
Tue Jan 14 11:42:24 CET 2003 - nadvornik@suse.cz

- fixed multi-line string literals

-------------------------------------------------------------------
Thu Dec 12 10:28:13 CET 2002 - stark@suse.de

- update to 0.8.1
  * minor bugfixes

-------------------------------------------------------------------
Mon Dec  2 07:20:10 CET 2002 - stark@suse.de

- removed radwatch from package

-------------------------------------------------------------------
Tue Nov 19 08:33:36 CET 2002 - stark@suse.de

- update to 0.8
  * Support for Status-Server packets
  * Fixed memory leak when proxying
  * Round-robin load balancing when proxying
  * Many bug fixes
  * (/usr/share/doc/packages/ChangeLog)
- moved modules to /usr/lib/freeradius

-------------------------------------------------------------------
Mon Aug 19 00:06:38 CEST 2002 - ro@suse.de

- don't overwrite README's with each other

-------------------------------------------------------------------
Fri Aug 16 09:06:03 CEST 2002 - stark@suse.de

- added PreReq (Bug #17838)

-------------------------------------------------------------------
Thu Jun 20 01:06:41 CEST 2002 - ro@suse.de

- hack ltconfig for ppc64

-------------------------------------------------------------------
Mon Apr  8 11:11:56 CEST 2002 - stark@suse.de

- fixed packaging on 64bit platforms
- added logrotate config
- added some sample scripts to doc-dir

-------------------------------------------------------------------
Fri Mar 22 15:01:10 CET 2002 - stark@suse.de

- update to 0.5
  * MS-CHAP and MS-CHAPv2 MPPE support,
  * EAP/MD5 and experimental EAP/TLS,
  * Experimental PHP web administration interface,
  * Fixes for *BSD,
  * Configurable database queries, executed per packet
    (e.g. %{ldap:ldap:///dc=company,dc=com?uid?sub?uid=%u}),
  * Fix logic bug which would cause occasional server crashes,
  * Server-side quenching of DoS attacks,
  * Experimental Python module,
  * Aptis, Quintum, and Foundry dictionaries,
  * Limited support for IPv6.

-------------------------------------------------------------------
Mon Feb 25 16:19:26 CET 2002 - stark@suse.de

- moved *.la back to main-package as it is needed for
  dynamic loading of modules

-------------------------------------------------------------------
Mon Feb 25 07:44:11 CET 2002 - stark@suse.de

- added patch to work with heimdal-krb5
- moved *.so to -devel package

-------------------------------------------------------------------
Fri Feb  8 14:24:51 CET 2002 - stark@suse.de

- deactivated kerberos support
  (seems to be not compatible with heimdal :-()

-------------------------------------------------------------------
Thu Feb  7 13:27:47 CET 2002 - stark@suse.de

- changed heimdal libdir

-------------------------------------------------------------------
Thu Dec 13 07:33:45 CET 2001 - stark@suse.de

- update to 0.4
- better use of fillup_and_insserv

-------------------------------------------------------------------
Mon Dec  3 11:42:15 CET 2001 - stark@suse.de

- don't use START_RADIUSD anymore
- make use of new fillup_and_insserv macro

-------------------------------------------------------------------
Fri Oct 12 07:03:07 CEST 2001 - stark@suse.de

- update to version 0.3
- packed source-archive as bz2
- branched package -> devel

-------------------------------------------------------------------
Fri Aug  3 07:53:54 CEST 2001 - stark@suse.de

- removed use of watcher-script
- removed config-check (-C) in init script
  (it's not supported in freeradius)

-------------------------------------------------------------------
Thu Aug  2 12:22:00 CEST 2001 - stark@suse.de

- status fix in init script
- renamed pam-configfile: radius -> radiusd

-------------------------------------------------------------------
Wed Aug  1 09:57:53 CEST 2001 - stark@suse.de

- updated to 0.2

-------------------------------------------------------------------
Thu Jul 26 10:06:01 CEST 2001 - kukuk@suse.de

- Fix needed for build

-------------------------------------------------------------------
Tue Jul 10 15:05:52 CEST 2001 - stark@suse.de

- added %{suse_update_config}

-------------------------------------------------------------------
Sat Jun 23 20:52:07 CEST 2001 - schwab@suse.de

- Fix preprocessor directives inside macro arguments.

-------------------------------------------------------------------
Mon Jun 18 07:58:08 CEST 2001 - stark@suse.de

- removed absolute paths from pam-config

-------------------------------------------------------------------
Wed May 23 13:32:20 CEST 2001 - stark@suse.de

- first official beta-version 0.1

-------------------------------------------------------------------
Wed Mar 21 13:11:34 CET 2001 - stark@suse.de

- new snapshot 20010321 (pre-BETA)
- replaced start- and killproc to avoid problems with Kernel 2.4
  using the radwatch shell-script
- added built of LDAP and MySQL modules

-------------------------------------------------------------------
Mon Jan 29 09:58:23 CET 2001 - stark@suse.de

- %files: /etc/raddb/bay.vendor -> /etc/raddb/dictionary.bay

-------------------------------------------------------------------
Mon Jan 15 10:52:42 CET 2001 - stark@suse.de

- new snapshot 20010115
- initial BETA package (sources are ALPHA!)

-------------------------------------------------------------------
Thu Jan  4 13:32:26 CET 2001 - stark@suse.de

- CVS snapshot 20010104

Places

File freeradius-server.changes of Package freeradius-server

Places