File 0125-40network-separate-mask-and-prefix.patch of Package dracut

Overview Repositories Revisions Requests Users Attributes Meta

File 0125-40network-separate-mask-and-prefix.patch of Package dracut (Revision 56f69afa62c497902432532379b6bafd)

Currently displaying revision 56f69afa62c497902432532379b6bafd , Show latest

From 50f59d60577283b71da5424e30d0c5981fb74f71 Mon Sep 17 00:00:00 2001
From: Hannes Reinecke <hare@suse.de>
Date: Fri, 18 Jul 2014 10:28:00 +0200
Subject: 40network: separate 'mask' and 'prefix'

The 'mask' parameter is used for both, the (IPv4) netmask and
the prefix length. As both are in different format separate them
out into 'mask' for the netmask and 'prefix' for the prefix length.
And also prefer the use of 'prefix' where possible to ease
calculation and better IPv6 support.

References: bnc#887542

Signed-off-by: Hannes Reinecke <hare@suse.de>
---
 modules.d/40network/ifup.sh          |  9 ++++----
 modules.d/40network/net-lib.sh       | 42 +++++++++++++++++++++++++++++++++---
 modules.d/40network/parse-ip-opts.sh |  2 +-
 3 files changed, 45 insertions(+), 8 deletions(-)

diff --git a/modules.d/40network/ifup.sh b/modules.d/40network/ifup.sh
index f3e07a6..e0bf035 100755
--- a/modules.d/40network/ifup.sh
+++ b/modules.d/40network/ifup.sh
@@ -223,13 +223,14 @@ do_static() {
     linkup $netif
     [ -n "$macaddr" ] && ip link set address $macaddr dev $netif
     [ -n "$mtu" ] && ip link set mtu $mtu dev $netif
+    [ -n "$mask" -a -z "$prefix" ] && prefix=$(mask_to_prefix $mask)
     if strglobin $ip '*:*:*'; then
         # note no ip addr flush for ipv6
-        ip addr add $ip/$mask ${srv:+peer $srv} dev $netif
+        ip addr add $ip/$prefix ${srv:+peer $srv} dev $netif
         wait_for_ipv6_dad $netif
     else
         ip addr flush dev $netif
-        ip addr add $ip/$mask ${srv:+peer $srv} brd + dev $netif
+        ip addr add $ip/$prefix ${srv:+peer $srv} brd + dev $netif
     fi
 
     [ -n "$gw" ] && echo ip route add default via $gw dev $netif > /tmp/net.$netif.gw
@@ -404,7 +405,7 @@ for p in $(getargs ip=); do
         # Pull in existing static configuration
         . /etc/sysconfig/network/ifcfg-${netif}
         ip=${IPADDR}
-        mask=${PREFIXLEN}
+        prefix=${PREFIXLEN}
         mtu=${MTU}
         server=${REMOTE_IPADDR}
         gw=${GATEWAY}
@@ -418,7 +419,7 @@ for p in $(getargs ip=); do
     done
 
     # Store config for later use
-    for i in ip srv gw mask hostname macaddr dns1 dns2; do
+    for i in ip srv gw mask prefix hostname macaddr dns1 dns2; do
         eval '[ "$'$i'" ] && echo '$i'="$'$i'"'
     done > /tmp/net.$netif.override
 
diff --git a/modules.d/40network/net-lib.sh b/modules.d/40network/net-lib.sh
index 554f723..a3b5030 100755
--- a/modules.d/40network/net-lib.sh
+++ b/modules.d/40network/net-lib.sh
@@ -9,6 +9,35 @@ get_ip() {
     ip=${ip##* }
 }
 
+mask_to_prefix() {
+    local mask="$1"
+    local prefix=0
+    local OLDIFS="$IFS"
+
+    IFS=:
+    set -- $mask
+    IFS="$OLDIFS"
+    for mask in $@ ; do
+        if [ "$mask" -eq 255 ] ; then
+            prefix=$(($prefix + 8))
+        elif [ "$mask" -eq 254 ] ; then
+            prefix=$(($prefix + 7))
+        elif [ "$mask" -eq 252 ] ; then
+            prefix=$(($prefix + 6))
+        elif [ "$mask" -eq 248 ] ; then
+            prefix=$(($prefix + 5))
+        elif [ "$mask" -eq 240 ] ; then
+            prefix=$(($prefix + 4))
+        elif [ "$mask" -eq 224 ] ; then
+            prefix=$(($prefix + 3))
+        elif [ "$mask" -eq 192 ] ; then
+            prefix=$(($prefix + 2))
+        elif [ "$mask" -eq 128 ] ; then
+            prefix=$(($prefix + 1))
+        fi
+    done
+}
+
 iface_for_remote_addr() {
     set -- $(ip -o route get to $1)
     echo $5
@@ -191,7 +220,7 @@ ibft_to_cmdline() {
         for iface in /sys/firmware/ibft/ethernet*; do
             local mac="" dev=""
             local dhcp="" ip="" gw="" mask="" hostname=""
-            local dns1 dns2
+            local dns1 dns2 prefix
 
             [ -e ${iface}/mac ] || continue
             mac=$(read a < ${iface}/mac; echo $a)
@@ -236,6 +265,7 @@ ibft_to_cmdline() {
                 [ -e ${iface}/hostname ] && hostname=$(read a < ${iface}/hostname; echo $a)
                 if [ "$family" = "ipv6" ] ; then
                     if [ -n "$ip" ] ; then
+                        # Prefix defaults to 64 for IPv6
                         [ -n "$prefix" ] || prefix=64
                         ip="[${ip}/${prefix}]"
                         mask=
@@ -243,6 +273,11 @@ ibft_to_cmdline() {
                     if [ -n "$gw" ] ; then
                         gw="[${gw}]"
                     fi
+                else
+                    if [ -n "$prefix" ] ; then
+                        ip="$ip/$prefix"
+                        mask=
+                    fi
                 fi
                 if [ -n "$ip" ] && [ -n "$mask" -o -n "$prefix" ]; then
                     echo "ip=$ip::$gw:$mask:$hostname:$dev:none${dns1:+:$dns1}${dns2:+:$dns2}"
@@ -251,6 +286,7 @@ ibft_to_cmdline() {
                     warn "ip-addr=$ip"
                     warn "gateway=$gw"
                     warn "subnet-mask=$mask"
+                    warn "prefix-len=$prefix"
                     warn "hostname=$hostname"
                 fi
             else
@@ -379,7 +415,7 @@ ip_to_var() {
         fi
     done
 
-    unset ip srv gw mask hostname dev autoconf macaddr mtu dns1 dns2
+    unset ip srv gw mask prefix hostname dev autoconf macaddr mtu dns1 dns2
     case $# in
         0)  autoconf="error" ;;
         1)  autoconf=$1 ;;
@@ -407,7 +443,7 @@ ip_to_var() {
     # Extract prefix length from CIDR notation
     case $ip in
         */*)
-            mask=${ip##*/}
+            prefix=${ip##*/}
             ip=${ip%/*}
             ;;
     esac
diff --git a/modules.d/40network/parse-ip-opts.sh b/modules.d/40network/parse-ip-opts.sh
index e48b0f3..52a1923 100755
--- a/modules.d/40network/parse-ip-opts.sh
+++ b/modules.d/40network/parse-ip-opts.sh
@@ -74,7 +74,7 @@ for p in $(getargs ip=); do
         none|off)
             [ -z "$ip" ] && \
             die "For argument 'ip=$p'\nValue '$autoconf' without static configuration does not make sense"
-            [ -z "$mask" ] && \
+            [ -z "$mask" -a -z "$prefix" ] && \
                 die "Sorry, automatic calculation of netmask is not yet supported"
             ;;
         auto6);;
-- 
1.8.4.5

Places

File 0125-40network-separate-mask-and-prefix.patch of Package dracut (Revision 56f69afa62c497902432532379b6bafd)

Places