File privoxy.changes of Package privoxy

Overview Repositories Revisions Requests Users Attributes Meta

File privoxy.changes of Package privoxy (Revision 48d244e961cc17f813e02a5ba292dc3a)

Currently displaying revision 48d244e961cc17f813e02a5ba292dc3a , Show latest

-------------------------------------------------------------------
Fri Dec  2 16:32:09 UTC 2011 - coolo@suse.com

- add automake as buildrequire to avoid implicit dependency

-------------------------------------------------------------------
Thu Apr 28 19:44:40 UTC 2011 - andreas.stieger@gmx.de

- updated to upstream 3.0.17 stable
- privoxy-3.0.17-config.patch:
  adjust chunk positions
  filterfile user.filter is uncommented in upstream source, removed chunk
- privoxy-3.0.17-utf8.patch:
  adjust chunk positions

- Fixed last-chunk-detection for responses where the content was small
  enough to be read with the body, causing Privoxy to wait for the
  end of the content until the server closed the connection or the
  request timed out. Reported by "Karsten" in #3028326.
- Responses with status code 204 weren't properly detected as body-less
  like RFC2616 mandates. Like the previous bug, this caused Privoxy to
  wait for the end of the content until the server closed the connection
  or the request timed out. Fixes #3022042 and #3025553, reported by a
  user with no visible name. Most likely also fixes a bunch of other
  AJAX-related problem reports that got closed in the past due to
  insufficient information and lack of feedback.
- Fixed an ACL bug that made it impossible to build a blacklist.
  Usually the ACL directives are used in a whitelist, which worked
  as expected, but blacklisting is still useful for public proxies
  where one only needs to deny known abusers access.
- Added LOG_LEVEL_RECEIVED to log the not-yet-parsed data read from the
  network. This should make debugging various parsing issues a lot easier.
- The IPv6 code is enabled by default on Windows versions that support it.
  Patch submitted by oCameLo in #2942729.
- In mingw32 versions, the user.filter file is reachable through the
  GUI, just like default.filter is. Feature request 3040263.
- Added the configure option --enable-large-file-support to set a few
  defines that are required by platforms like GNU/Linux to support files
  larger then 2GB. Mainly interesting for users without proper logfile
  management.
- Logging with "debug 16" no longer stops at the first nul byte which is
  pretty useless. Non-printable characters are replaced with their hex value
  so the result can't span multiple lines making parsing them harder then
  necessary.
- Privoxy logs when reading an action, filter or trust file.
- Fixed incorrect regression test markup which caused a test in
  3.0.16 to fail while Privoxy itself was working correctly.
  While Privoxy accepts hide-referer, too, the action name is actually
  hide-referrer which is also the name used one the final results page,
  where the test expected the alias.

- CGI interface improvements:
  - In finish_http_response(), continue to add the 'Connection: close'
    header if the client connection will not be kept alive.
    Anonymously pointed out in #2987454.
  - Apostrophes in block messages no longer cause parse errors
    when the blocked page is viewed with JavaScript enabled.
    Reported by dg1727 in #3062296.
  - Fix a bunch of anchors that used underscores instead of dashes.
  - Allow to keep the client connection alive after crunching the previous request.
    Already opened server connections can be kept alive, too.
  - In cgi_show_url_info(), don't forget to prefix URLs that only contain
    http:// or https:// in the path. Fixes #2975765 reported by Adam Piggott.
  - Show the 404 CGI page if cgi_send_user_manual() is called while
    local user manual delivery is disabled.

- Action file improvements:
  - Enable user.filter by default. Suggested by David White in #3001830.
  - Block .sitestat.com/. Reported by johnd16 in #3002725.
  - Block .atemda.com/. Reported by johnd16 in #3002723.
  - Block js.adlink.net/. Reported by johnd16 in #3002720.
  - Block .analytics.yahoo.com/. Reported by johnd16 in #3002713.
  - Block sb.scorecardresearch.com, too. Reported by dg1727 in #2992652.
  - Fix problems noticed on Yahoo mail and news pages.
  - Remove the too broad yahoo section, only keeping the
    fast-redirects exception as discussed on ijbswa-devel@.
  - Don't block adesklets.sourceforge.net. Reported in #2974204.
  - Block chartbeat ping tracking. Reported in #2975895.
  - Tag CSS and image requests with cautious and medium settings, too.
  - Don't handle view.atdmt.com as image. It's used for click-throughs
    so users should be able to "go there anyway".
    Reported by Adam Piggott in #2975927.
  - Also let the refresh-tags filter remove invalid refresh tags where
    the 'url=' part is missing. Anonymously reported in #2986382.
    While at it, update the description to mention the fact that only
    refresh tags with refresh times above 9 seconds are covered.
  - javascript needs to be blocked with +handle-as-empty-document to
    work around Firefox bug 492459.  So move .js blockers from
    +block{Might be a web-bug.} -handle-as-empty-document to
    +block{Might be a web-bug.} +handle-as-empty-document.
  - ijbswa-Feature Requests-3006719 - Block 160x578 Banners.
  - Block another omniture tracking domain.
  - Added a range-requests tagger.
  - Added two sections to get Flickr's Ajax interface working with
    default pre-settings. If you change the configuration to block
    cookies by default, you'll need additional exceptions.
    Reported by Mathias Homann in #3101419 and by Patrick on ijbswa-users@.

- Documentation improvements:
  - Explicitly mention how to match all URLs.
  - Consistently recommend socks5 in the Tor FAQ entry and mention
    its advantage compared to socks4a. Reported by David in #2960129.
  - Slightly improve the explanation of why filtering may appear
    slower than it is.
  - Grammar fixes for the ACL section.
  - Fixed a link to the 'intercepting' entry and add another one.
  - Rename the 'Other' section to 'Mailing Lists' and reword it
    to make it clear that nobody is forced to use the trackers
  - Note that 'anonymously' posting on the trackers may not always
    be possible.
  - Suggest to enable debug 32768 when suspecting parsing problems.

- Privoxy-Log-Parser improvements:
  - Gather statistics for ressources, methods, and HTTP versions
    used by the client.
  - Also gather statistics for blocked and redirected requests.
  - Provide the percentage of keep-alive offers the client accepted.
  - Add a --url-statistics-threshold option.
  - Add a --host-statistics-threshold option to also gather
    statistics about how many request where made per host.
  - Fix a bug in handle_loglevel_header() where a 'scan: ' got lost.
  - Add a --shorten-thread-ids option to replace the thread id with
    a decimal number.
  - Accept and ignore: Looks like we got the last chunk together
    with the server headers. We better stop reading.
  - Accept and ignore: Continue hack in da house.
  - Accept and higlight: Rejecting connection from 10.0.0.2.
    Maximum number of connections reached.
  - Accept and highlight: Loading actions file: /usr/local/etc/privoxy/default.action
  - Accept and highlight: Loading filter file: /usr/local/etc/privoxy/default.filter
  - Accept and highlight: Killed all-caps Host header line: HOST: bestproxydb.com
  - Accept and highlight: Reducing expected bytes to 0. Marking
    the server socket tainted after throwing 4 bytes away.
  - Accept: Merged multiple header lines to: 'X-FORWARDED-PROTO: http X-HOST: 127.0.0.1'

- Code cleanups:
  - Remove the next member from the client_state struct. Only the main
    thread needs access to all client states so give it its own struct.
  - Garbage-collect request_contains_null_bytes().
  - Ditch redundant code in unload_configfile().
  - Ditch LogGetURLUnderCursor() which doesn't seem to be used anywhere.
  - In write_socket(), remove the write-only variable write_len in
    an ifdef __OS2__ block. Spotted by cppcheck.
  - In connect_to(), don't declare the variable 'flags' on OS/2 where
    it isn't used. Spotted by cppcheck.
  - Limit the scope of various variables. Spotted by cppcheck.
  - In add_to_iob(), turn an interestingly looking for loop into a
    boring while loop.
  - Code cleanup in preparation for external filters.
  - In listen_loop(), mention the socket on which we accepted the
    connection, not just the source IP address.
  - In write_socket(), also log the socket we're writing to.
  - In log_error(), assert that escaped characters get logged
    completely or not at all.
  - In log_error(), assert that ival and sval have reasonable values.
    There's no reason not to abort() if they don't.
  - Remove an incorrect cgi_error_unknown() call in a
    cannnot-happen-situation in send_crunch_response().
  - Clean up white-space in http_response definition and
    move the crunch_reason to the beginning.
  - Turn http_response.reason into an enum and rename it
    to http_response.crunch_reason.
  - Silence a 'gcc (Debian 4.3.2-1.1) 4.3.2' warning on i686 GNU/Linux.
  - Fix white-space in a log message in remove_chunked_transfer_coding().
    While at it, add a note that the message doesn't seem to
    be entirely correct and should be improved later on.

- GNUmakefile improvements:
  - Use $(SSH) instead of ssh, so one only needs to specify a username once.
  - Removed references to the action feedback thingy that hasn't been
    working for years.
  - Consistently use shell.sourceforge.net instead of shell.sf.net so
    one doesn't need to check server fingerprints twice.
  - Removed GNUisms in the webserver and webactions targets so they
    work with standard tar.

-------------------------------------------------------------------
Mon Mar 15 18:25:24 UTC 2010 - per@osbeck.com

- updated to 3.0.16 stable
- Added the config file option handle-as-empty-doc-returns-ok to
  work around Firefox bug #492459, which causes Firefox to hang
  if JavaScripts are blocked in certain situations. The option is
  enabled in the default config file.
- Added the config file option default-server-timeout to control the
  assumed default server timeout. Since Privoxy no longer returns
  an error message for connection resets on reused client connections,
  assuming larger server timeout values appears to actually work
  pretty well as long as connections aren't shared.
- Added optional support for FreeBSD's accf_http(9). Use the
  configure option --enable-accept-filter to enable it.
- Added fancier Privoxy icons for win32. Contributed by Jeff H.
- In daemon mode, fd 0, 1 and 2 are bound to /dev/null.
- Resolve localhost using whatever address family the operating
  system feels like. Previous betas would try to use IPv4 as this
  is what most users expect, but this didn't work reliably on
  GNU/Linux systems.
- In the action lists on CGI pages, actions and their parameters are
  no longer separated with a space. The action file parser doesn't
  actually allow this and will throw an invalid syntax error if actions
  and parameters in the action files are separated. Not adding the
  spaces means copy and pasting CGI output into the action files works.
- The default keep-alive timeout has been reduced to 5 seconds to work
  around hangs in clients that treat the proxy like any other host and
  stop allowing any new connections if the "maximum number of
  connections per host" is reached.
- Several webbug URLs that look like they are leading to images are now
  blocked as image instead of empty documents. Doing the latter causes
  WebKit-based clients to show a "missing image" icon which may mess up
  the layout.
- The no-such-domain template is used for DNS resolution
  problems with FEATURE_IPV6_SUPPORT enabled. Previously the
  connect-failed template was used. Reported by 'zebul666'.
- Accepts quoted expiration dates even though RFC 2109 10.1.2
  doesn't seem to allow them. Reported anonymously.
- Don't try to forget connections if connection sharing is disabled.
  This wasn't a real problem but caused an unnecessary log message.
- The still undocumented --enable-extended-host-patterns configure
  option has a better description.
- Fixed an error message that would claim a write to the server
  failed when actually writing to the client failed.
- Log the crunch reason before trying to write to the client.
  The log is easier to read that way.
- Several log messages about client connections also mention
  the socket number.
- handle-as-empty-document no longer depends on the image blocking
  code being enabled.
- Privoxy-Log-Parser is roughly 40% faster in highlighting mode.
- uagen, a Firefox User-Agent generator for Privoxy and Mozilla
  browsers has been imported and is available in the tarball's
  tools directory.
- The scripts in the tools directory treat unknown parameters
  as fatal errors.

-------------------------------------------------------------------
Wed Jan 27 15:11:45 UTC 2010 - mseben@novell.com

- updated to 3.0.15 BETA
  - In case of missing server data, no error message is send to the
    client if the request arrived on a reused connection. The client
    is then supposed to silently retry the request without bothering
    the user. This should significantly reduce the frequency of the
    "No server or forwarder data received" error message many users
    reported.
  - More reliable detection of prematurely closed client sockets
    with keep-alive enabled.
  - FEATURE_CONNECTION_KEEP_ALIVE is decoupled from
    FEATURE_CONNECTION_SHARING and now available on
    all platforms.
  - Improved handling of POST requests on reused connections.
    Should fix problems with stalled connections after submitting
    form data with some browser configurations.
  - Fixed various latency calculation issues.
  - Allows the client to pass NTLM authentication requests to a
    forwarding proxy. This was already assumed and hinted to work
    in 3.0.13 beta but actually didn't. Now it's confirmed to work
    with IE, Firefox and Chrome.
    Thanks to Francois Botha and Wan-Teh Chang
  - Fixed a calculation problem if receiving the server headers
    takes more than two reads, that could cause Privoxy to terminate
    the connection prematurely. Reported by Oliver.
  - Compiles again on platforms such as OpenBSD and systems
    using earlier glibc version that don't support AI_ADDRCONFIG.
    Anonymously submitted in #2872591.
  - A bunch of MS VC project files and Suse and Redhat RPM spec
    files have been removed as they were no longer maintained for
    quite some time.
  - Overly long action lines are properly rejected with a proper
    error message. Previously they would be either rejected as
    invalid or cause a core dump through abort().
  - Already timed-out connections are no longer temporarily remembered.
    They weren't reused anyway, but wasted a socket slot.
  - len refers to the number of bytes actually read which might
    differ from the ones received. Adjust log messages accordingly.
  - The optional JavaScript on the CGI page uses encodeURIComponent()
    instead of escape() which doesn't encode all characters that matter.
    Anonymously reported in #2832722.
  - Fix gcc45 warnings in decompress_iob().
  - Various log message improvements.
  - Privoxy-Regression-Test supports redirect tests.
  - Privoxy-Log-Parser can gather some connection statistics.
- moved init script to init.suse file and dropped diff against 
  tarball: init.patch 
 
-------------------------------------------------------------------
Tue Sep 29 12:53:59 UTC 2009 - aj@suse.de

- Fix requires of doc package.

-------------------------------------------------------------------
Tue Aug 11 15:37:05 CEST 2009 - mseben@suse.cz

- add parameter "-T 1" for startproc in init script, wait 1 sec until
  privoxy check config (bnc#506708)
- use rc_active in NM dispatcher init script to check if privoxy
  service is active

-------------------------------------------------------------------
Wed Aug  5 12:46:53 CEST 2009 - mseben@suse.cz

- updated to 3.0.14 BETA
 * The latency is taken into account when evaluating whether or not to
   reuse a connection. This should significantly reduce the number of
   connections problems several users reported.
 * If the server doesn't specify how long the connection stays alive,
   Privoxy errs on the safe side of caution and assumes it's only a second.
 * The error pages for connection timeouts or missing server data use a
   Last-Modified date in the past.
 * Setting keep-alive-timeout to 0 disables keep-alive support.
 * Pipelined requests are less likely to be mistaken for the request
   body of the previous request.
 * Privoxy's keep-alive timeout for the current connection is reduced
   to the one specified in the client's Keep-Alive header.
 * For HTTP/1.1 requests, Privoxy implies keep-alive support by not
   setting any Connection header instead of using 'Connection: keep-alive'.
 * If the socket isn't reusable, Privoxy doesn't temporarily waste
   a socket slot to remember the connection.
 * If keep-alive support is disabled but compiled in, the client's
   Keep-Alive header is removed.
 * Fixed a bug that (at least theoretically) could cause log
   timestamps to be occasionally off by about a second.
 * No Proxy-Connection header if added if there already is one.
 * The configure script respects the $PATH variable when searching
   for groups and id.

- version 3.0.13 BETA
 * Added IPv6 support. Thanks to Petr Pisar
 * The connection sharing code is only used if the connection-sharing
   option is enabled.
 * The max-client-connections option has been added to restrict
   the number of client connections below a value enforced by
   the operating system.
 * Compressed content with extra fields couldn't be decompressed
   and would get passed to the client unfiltered.
 * If the server resets the Connection after sending only the headers
   Privoxy forwards what it got to the client.
 * Error messages in case of connection timeouts use the right
   HTTP status code.
 * If spawning a child to handle a request fails, the client
   gets an error message and Privoxy continues to listen for
   new requests right away.
 * The error messages in case of server-connection timeouts or
   prematurely closed server connections are now template-based.
 * If zlib support isn't compiled in, Privoxy no longer tries to
   filter compressed content unless explicitly asked to do so.
 * In case of connections that are denied based on ACL directives,
   the memory used for the client IP is no longer leaked.
 * Fixed another small memory leak if the client request times out
   while waiting for client headers other than the request line.
 * The client socket is kept open until the server socket has
   been marked as unused. This should increase the chances that
   the still-open connection will be reused for the client's next
   request to the same destination. Note that this only matters
   if connection-sharing is enabled.

-------------------------------------------------------------------
Fri May 15 15:45:50 CEST 2009 - mseben@suse.cz

- modified config.patch : enabled filterfile user.filter in
  config by default (bnc#504563)

- updated to 3.0.12
  * The socket-timeout option now also works on platforms whose
    select() implementation modifies the timeout structure.
  * The Connection: keep-alive code properly deals with files
    larger than 2GB.
  * The content length for files above 2GB is logged correctly.
  * The user-manual directive on the show-status page links to
    the documentation location specified with the directive,
    not to the Privoxy website.
  * When running in daemon mode, Privoxy doesn't log anything
    to the console unless there are errors before the logfile
    has been opened.
  * The show-status page prints warnings about invalid directives
    on the same line as the directives themselves.
  * Fixed several justified (but harmless) compiler warnings
  * In verbose mode, or if the new option --show-skipped-tests
    is used, Privoxy-Regression-Test logs skipped tests and the
    skip reason.

- changes in version 3.0.11
  * On most platforms, outgoing connections can be kept alive and
    reused if the server supports it.
  * When dropping privileges, membership in supplementary groups
    is given up as well. Not doing that can lead to Privoxy running
    with more rights than necessary and violates the principle of
    least privilege. Users of the --user option are advised to update.
    Thanks to Matthias Drochner for reporting the problem,
    providing the initial patch and testing the final version.
  * Passing invalid users or groups with the --user option
    didn't lead to program exit. Regression introduced in 3.0.7.
  * The match all section has been moved from default.action
    to a new file called match-all.action. As a result the
    default.action no longer needs to be touched by the user
    and can be safely overwritten by updates.
  * The standard.action file has been removed. Its content
    is now part of the default.action file.
  * In some situations the logged content length was slightly too low.
  * Crunched requests are logged with their own log level.
    If you used "debug 1" in the past, you'll probably want
    to additionally enable "debug 1024", otherwise only passed
    requests will be logged. If you only care about crunched
    requests, simply replace "debug 1" with "debug 1024".
  * The crunch reason has been moved to the beginning of the
    crunch message. For HTTP URLs, the protocol is logged as well.
  * Log messages are shortened by printing the thread id on its own.
  * The config option socket-timeout has been added to control
    the time Privoxy waits for data to arrive on a socket.
  * Support for remote toggling is controlled by the configure
    option --disable-toggle only.
  * Requests with invalid HTTP versions are rejected.
  * The template symbol @date@ can be used to include a date(1)-like
    time string. Initial patch submitted by Endre Szabo.
  * Responses from shoutcast servers are accepted again.
    Problem reported and fix suggested by Stefan.
  * The hide-forwarded-for-headers action has been replaced with
    the change-x-forwarded-for{} action which can also be used to
    add X-Forwarded-For headers.

-------------------------------------------------------------------
Fri Mar 13 09:31:22 CET 2009 - mseben@suse.cz

- changed init.patch - privoxy daemon is now started using startproc
- fixed networkmanager.patch - use try-restart to restart (bnc#475012)

-------------------------------------------------------------------
Sun Oct 12 20:14:48 CEST 2008 - schwab@suse.de

- Fix preun and postun scripts.

-------------------------------------------------------------------
Fri Aug 22 16:32:41 CEST 2008 - lmichnovic@suse.cz

- update to version 3.0.10 stable
 * Ordinary configuration file changes no longer cause program
   termination on OS/2 if the name of the logfile hasn't been
   changed as well. This regression probably crept in with the
   logging improvements in 3.0.7. Reported by Maynard.
 * The img-reorder filter is less likely to mess up JavaScript
   code in img tags. Problem and solution reported in #2014552.
 * The source tar ball now includes Privoxy-Log-Parser,
   a syntax-highlighter for Privoxy logs. For fancy screenshots 
   see: http://www.fabiankeil.de/sourcecode/privoxy-log-parser/
   Documentation is available through perldoc(1).

-------------------------------------------------------------------
Fri Aug 22 10:51:51 CEST 2008 - lmichnovic@suse.cz

- removed deprecated -s option in fillup_and_insserv macro call

-------------------------------------------------------------------
Tue Aug 19 11:20:36 CEST 2008 - lmichnovic@suse.cz

- changed name of init script to privoxyd to be LSB compliant
- added $remote_fs $local_fs for stop service in privoxyd init
  script (*init.patch)

-------------------------------------------------------------------
Mon Jul 14 14:34:23 CEST 2008 - lmichnovic@suse.cz

- update to 3.0.9 beta
 * 3.0.9 is a beta release which includes many enhancements but no
   major new features. The most prominent improvements are SOCKS5
   support and zlib support for the default Privoxy builds.
   See http://www.privoxy.org/3.0.9/user-manual/whatsnew.html
- split off documentation to subpackage

-------------------------------------------------------------------
Thu Apr 10 02:46:57 CEST 2008 - crrodriguez@suse.de

- missing zlib-devel in buildrequires
- require both logrotate and cron that are no longer mandatory
  in the base system in order to rotate the logs properly

-------------------------------------------------------------------
Tue Jan 29 16:28:05 CET 2008 - lmichnovic@suse.cz

- update to version 3.0.8 stable
 * some bugfixes
 * Updated the msn, yahoo and google filters to work as advertised
   again.
 * some changes in log messages
 See Changelog for more information

-------------------------------------------------------------------
Wed Jan  9 18:42:11 CET 2008 - lmichnovic@suse.cz

- update to version 3.0.7 beta
 * many bugfixes
 * many new features, see Changelog for details

-------------------------------------------------------------------
Wed Nov 28 15:11:56 CET 2007 - lmichnovic@suse.cz

- added Short-Description tag in /etc/init.d/privoxy
  ( -> *init.patch)

-------------------------------------------------------------------
Tue Mar  6 17:02:24 CET 2007 - lmichnovic@suse.cz

- added symlink into /etc to real configdir /var/lib/privoxy/etc
  [#251261]

-------------------------------------------------------------------
Wed Dec  6 21:41:02 CET 2006 - lmichnovic@suse.cz

- update to version 3.0.6 stable
  * New and improoved filters
  * Changed webinterface default values for hide-user-agent etc.
  * Removed outdated URL patterns in default.action; added new ones
- fix: when Network Manager switches the LAN, privoxy stops working
  (networkmanager.patch)

-------------------------------------------------------------------
Wed Sep 27 14:20:24 CEST 2006 - lmichnovic@suse.cz

- update to verson 3.0.5 beta
  * Windows version can be installed/started as a service.
  * Windows icon stays blue when Privoxy is idle, green when busy.
  * Integrated Fabian Keil's extensive patch.  See:
    http://www.fabiankeil.de/sourcecode/privoxy/
  * many other improvements and bugfixes (see Changelog)

-------------------------------------------------------------------
Wed Jan 25 21:40:38 CET 2006 - mls@suse.de

- converted neededforbuild to BuildRequires

-------------------------------------------------------------------
Thu Jan  5 02:09:10 CET 2006 - ro@suse.de

- do not create unpackaged symlink

-------------------------------------------------------------------
Thu Dec  8 14:37:37 CET 2005 - lmichnovic@suse.cz

- fixed bad permissions for program's log directory (#137544)

-------------------------------------------------------------------
Mon Aug 22 11:32:37 CEST 2005 - ltinkl@suse.cz

- limit the debug
  (privoxy shouldn't log all URLs by default - #99710)
-------------------------------------------------------------------
Wed Mar 09 13:19:05 CET 2005 - ltinkl@suse.cz

- convert config file to utf-8 (#71276)

-------------------------------------------------------------------
Wed Mar 03 13:31:03 CET 2004 - ltinkl@suse.cz

- update to 3.0.3
- added pcre to neededforbuild

-------------------------------------------------------------------
Sat Jan 10 22:31:35 CET 2004 - adrian@suse.de

- build as user

-------------------------------------------------------------------
Wed Jul 30 16:47:17 CEST 2003 - poeml@suse.de

- new macros for stop/restart of services on rpm update/removal

-------------------------------------------------------------------
Mon Jul 28 10:52:20 CEST 2003 - poeml@suse.de

- update to 3.0.2 (maintenance release). 
  - Fixed two memory leaks, one serious
  - Fixed a bug in pcrs which could cause crashes with user-defined filters
  - Fixed a bug in domain name matching
  - Assorted small fixes (Win32 menu, CGI URL editor, ..)
  - Added basic support for the OPTIONS and TRACE http methods
  - Added workaround for Bug in Mac OSX that made Privoxy crash occasionally
  - Refined the default action file through >400 items of user feedback
  - Filter changes:
    - Assorted refinements, optimizations and fixes in the js-annoyances,
      img-reorder, banners-by-size, banners-by-link, webbugs, refresh-tags,
      html-annoyances, content-cookies and fun filters
    - Replaced filter "popups" by choice between two modes:
      - "unsolicited-popups" tries to catch only the unsolicited ones
      - "all-popups" tries to kill them all (as before)
    - New filter "tiny-textforms" to help those tiny or hard-wrap textareas.
    - New filter "jumping-windows" that prevents windows from resizing
      and moving themselves
    - New filter "demoronizer" which fixes MS's abuse of std charsets
      (common cases anyway).
    - Replaced "nimda" with more general "ie-exploits" filter in which
      all filters for IE exploits shall be collected
  - Improved cookie logging
  - Rewrote make install target. Added uninstall and install-strip
    targets.
  - Fixed a potential (application-level, NOT OS-level!) security
    problem involving remote toggling or action file manipulation
    by mailicious websites.
  - Added ability to chroot (thanks to Sviatoslav Sviridov)
  - Added more action aliases for prehistoric action names
- no longer run as wwwrun. Create user privoxy instead
- run in chroot jail

-------------------------------------------------------------------
Wed May 21 18:27:30 CEST 2003 - mmj@suse.de

- Implement try-restart correctly in init-script

-------------------------------------------------------------------
Fri May 16 17:47:43 CEST 2003 - poeml@suse.de

- fix creation of log files [#25990]
- add logrotate snippet [#26892]
- fix permissions of the files that are edited via the web frontend
  (default.action, user.action)
- buildrooted

-------------------------------------------------------------------
Fri Nov 15 20:34:50 CET 2002 - poeml@suse.de

- init script: run under group nogroup instead of nobody 
- add license file and documentation (pdf, text)
- use %setup -q and %defattr

-------------------------------------------------------------------
Thu Sep 19 12:45:14 CEST 2002 - uli@suse.de

- update -> 3.0.0 (stable release)
- source rc.status in init script

-------------------------------------------------------------------
Thu Aug  8 14:46:04 CEST 2002 - uli@suse.de

- update -> 2.9.18-beta (many fixes)

-------------------------------------------------------------------
Thu Aug  1 16:12:26 CEST 2002 - uli@suse.de

- added Prereqs

-------------------------------------------------------------------
Thu Jul 18 21:01:43 CEST 2002 - uli@suse.de

- only source /etc/rc.config if it's actually there

-------------------------------------------------------------------
Wed May 15 11:37:12 CEST 2002 - uli@suse.de

- update -> privoxy 2.9.14-beta (superset of junkbuster)

-------------------------------------------------------------------
Thu Jan 31 16:31:38 CET 2002 - uli@suse.de

- run as nobody
- removed weird backslashes from init script (dunno how that got
  in there)

-------------------------------------------------------------------
Thu Jan 10 12:28:04 CET 2002 - ro@suse.de

- removed START_IJB from init-script

-------------------------------------------------------------------
Thu Jan 10 12:03:29 CET 2002 - egmont@suselinux.hu

- changed /sbin/init.d to /etc/init.d in init script comment

-------------------------------------------------------------------
Thu Dec  6 16:58:18 CET 2001 - uli@suse.de

- eliminated START_IJB

-------------------------------------------------------------------
Wed Aug  1 16:39:58 CEST 2001 - uli@suse.de

- made init script more LSB compliant (proper return values, bug
  #9045)

-------------------------------------------------------------------
Wed Jun 27 17:19:05 CEST 2001 - uli@suse.de

- marked init script %config

-------------------------------------------------------------------
Thu May 10 17:46:16 CEST 2001 - uli@suse.de

- enabled START_IJB check in init script (bug #8061)
- added rc.config template
- bzipped tarball

-------------------------------------------------------------------
Wed Feb 14 18:58:52 CET 2001 - uli@suse.de

- fixed init script

-------------------------------------------------------------------
Wed Dec  6 17:36:42 CET 2000 - bjacke@suse.de

- renamed package to junkbuster
- fixed copyright tag

-------------------------------------------------------------------
Thu Nov 30 14:51:01 CET 2000 - uli@suse.de

- moved init script to /etc/init.d

-------------------------------------------------------------------
Wed Feb 16 21:09:45 CET 2000 - kukuk@suse.de

- Move /usr/man -> /usr/share/man
- Mark /etc/ijb as "config(noreplace)"

-------------------------------------------------------------------
Mon Sep 20 12:12:54 MEST 1999 - uli@suse.de

- fixed init script

-------------------------------------------------------------------
Mon Sep 13 17:23:57 CEST 1999 - bs@suse.de

- ran old prepare_spec on spec file to switch to new prepare_spec.

-------------------------------------------------------------------
Thu Apr  1 11:21:03 MEST 1999 - daniel@suse.de

- do not start ijb as root (security)

-------------------------------------------------------------------
Tue Mar 30 23:21:30 MEST 1999 - daniel@suse.de

- don't use saclfile.ini

-------------------------------------------------------------------
Tue Mar 30 15:03:41 MEST 1999 - daniel@suse.de

- small fix to whitelist-configuration,
  version is and was 2.0.2 WITHOUT Stefan Waldherr's patches
  (http://www.waldherr.org/junkbuster/)

-------------------------------------------------------------------
Mon Mar  1 21:39:51 MET 1999 - daniel@suse.de

- new package: version 2.0

Places

File privoxy.changes of Package privoxy (Revision 48d244e961cc17f813e02a5ba292dc3a)

Places