File gromacs-3.3.1.dif of Package gromacs

Overview Repositories Revisions Requests Users Attributes Meta

File gromacs-3.3.1.dif of Package gromacs (Revision 7db12497e1b3d8e4792a8d0c4ac70252)

Currently displaying revision 7db12497e1b3d8e4792a8d0c4ac70252 , Show latest

Index: acinclude.m4
===================================================================
--- acinclude.m4.orig
+++ acinclude.m4
@@ -1268,6423 +1268,3 @@ else
 fi
 AC_LANG_RESTORE
 ])dnl ACX_PTHREAD 
-
-
-
-
-# Libtool file included from libtool.m4
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005 Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-
-
-# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
-# -----------------------------------------------------------
-# If this macro is not defined by Autoconf, define it here.
-m4_ifdef([AC_PROVIDE_IFELSE],
- [],
- [m4_define([AC_PROVIDE_IFELSE],
-	 [m4_ifdef([AC_PROVIDE_$1],
-		 [$2], [$3])])])
-
-
-# AC_PROG_LIBTOOL
-# ---------------
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
- AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [AC_LIBTOOL_CXX],
- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
- ])])
-dnl And a similar setup for Fortran 77 support
- AC_PROVIDE_IFELSE([AC_PROG_F77],
- [AC_LIBTOOL_F77],
- [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
- AC_PROVIDE_IFELSE([AC_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	[AC_LIBTOOL_GCJ],
- [ifdef([AC_PROG_GCJ],
-	 [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
- ifdef([A][M_PROG_GCJ],
-	 [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
- ifdef([LT_AC_PROG_GCJ],
-	 [define([LT_AC_PROG_GCJ],
-		defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
-])])# AC_PROG_LIBTOOL
-
-
-# _AC_PROG_LIBTOOL
-# ----------------
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Prevent multiple expansion
-define([AC_PROG_LIBTOOL], [])
-])# _AC_PROG_LIBTOOL
-
-
-# AC_LIBTOOL_SETUP
-# ----------------
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.50)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-AC_LIBTOOL_SYS_MAX_CMD_LEN
-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-AC_LIBTOOL_OBJDIR
-
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-_LT_AC_PROG_ECHO_BACKSLASH
-
-case $host_os in
-aix3*)
- # AIX sometimes has problems with the GCC collect2 program. For some
- # reason, if we set the COLLECT_NAMES environment variable, the problems
- # vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
- fi
- ;;
-esac
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-[sed_quote_subst='s/$[\\"\\`$\\\\]$/\\\1/g']
-
-# Same as above, but do not quote variable references.
-[double_quote_subst='s/$[\\"\\`\\\\]$/\\\1/g']
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-# Constants:
-rm="rm -f"
-
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-AC_CHECK_TOOL(AR, ar, false)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
-test -z "$ac_objext" && ac_objext=o
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
- case $host_os in
- openbsd*)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
- ;;
- *)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
- ;;
- esac
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
-_LT_CC_BASENAME([$compiler])
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
- AC_PATH_MAGIC
- fi
- ;;
-esac
-
-AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-enable_win32_dll=yes, enable_win32_dll=no)
-
-AC_ARG_ENABLE([libtool-lock],
- [AC_HELP_STRING([--disable-libtool-lock],
-	[avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-AC_ARG_WITH([pic],
- [AC_HELP_STRING([--with-pic],
-	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
- [pic_mode="$withval"],
- [pic_mode=default])
-test -z "$pic_mode" && pic_mode=default
-
-# Use C for the default configuration in the libtool script
-tagname=
-AC_LIBTOOL_LANG_C_CONFIG
-_LT_AC_TAGCONFIG
-])# AC_LIBTOOL_SETUP
-
-
-# _LT_AC_SYS_COMPILER
-# -------------------
-AC_DEFUN([_LT_AC_SYS_COMPILER],
-[AC_REQUIRE([AC_PROG_CC])dnl
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-])# _LT_AC_SYS_COMPILER
-
-
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
-AC_DEFUN([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
- case $cc_temp in
- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-])
-
-
-# _LT_COMPILER_BOILERPLATE
-# ------------------------
-# Check for compiler boilerplate output or warnings with
-# the simple compiler test code.
-AC_DEFUN([_LT_COMPILER_BOILERPLATE],
-[ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-])# _LT_COMPILER_BOILERPLATE
-
-
-# _LT_LINKER_BOILERPLATE
-# ----------------------
-# Check for linker boilerplate output or warnings with
-# the simple link test code.
-AC_DEFUN([_LT_LINKER_BOILERPLATE],
-[ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-])# _LT_LINKER_BOILERPLATE
-
-
-# _LT_AC_SYS_LIBPATH_AIX
-# ----------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
-# the location of the communication and MPI libs are included too.
-# If we don't find anything, use the default library path according
-# to the aix ld manual.
-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; }
-}'`; fi],[])
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-])# _LT_AC_SYS_LIBPATH_AIX
-
-
-# _LT_AC_SHELL_INIT(ARG)
-# ----------------------
-AC_DEFUN([_LT_AC_SHELL_INIT],
-[ifdef([AC_DIVERSION_NOTICE],
-	 [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-	 [AC_DIVERT_PUSH(NOTICE)])
-$1
-AC_DIVERT_POP
-])# _LT_AC_SHELL_INIT
-
-
-# _LT_AC_PROG_ECHO_BACKSLASH
-# --------------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-[_LT_AC_SHELL_INIT([
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$ECHO in
-X*--fallback-echo)
- # Remove one level of quotation (which was required for Make).
- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
- ;;
-esac
-
-echo=${ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X[$]1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
- # Yippee, $echo works!
- :
-else
- # Restart under the correct shell.
- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-fi
-
-if test "X[$]1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-[$]*
-EOF
- exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if (echo_test_string=`eval $cmd`) 2>/dev/null &&
- echo_test_string=`eval $cmd` &&
- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
- then
- break
- fi
- done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
-else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
-
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
- IFS="$lt_save_ifs"
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$dir/echo"
- break
- fi
- done
- IFS="$lt_save_ifs"
-
- if test "X$echo" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- echo='print -r'
- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-	 test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
- else
- # Try using printf.
- echo='printf %s\n'
- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-	 test "X$echo_testing_string" = "X$echo_test_string"; then
-	# Cool, printf works
-	:
- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	 test "X$echo_testing_string" = 'X\t' &&
-	 echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	 test "X$echo_testing_string" = "X$echo_test_string"; then
-	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	export CONFIG_SHELL
-	SHELL="$CONFIG_SHELL"
-	export SHELL
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	 test "X$echo_testing_string" = 'X\t' &&
-	 echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	 test "X$echo_testing_string" = "X$echo_test_string"; then
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
- else
-	# maybe with a smaller string...
-	prev=:
-
-	for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-	 if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-	 then
-	 break
-	 fi
-	 prev="$cmd"
-	done
-
-	if test "$prev" != 'sed 50q "[$]0"'; then
-	 echo_test_string=`eval $prev`
-	 export echo_test_string
-	 exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-	else
-	 # Oops. We lost completely, so just stick with echo.
-	 echo=echo
-	fi
- fi
- fi
- fi
-fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-fi
-
-AC_SUBST(ECHO)
-])])# _LT_AC_PROG_ECHO_BACKSLASH
-
-
-# _LT_AC_LOCK
-# -----------
-AC_DEFUN([_LT_AC_LOCK],
-[AC_ARG_ENABLE([libtool-lock],
- [AC_HELP_STRING([--disable-libtool-lock],
-	[avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.$ac_objext` in
- *ELF-32*)
- HPUX_IA64_MODE="32"
- ;;
- *ELF-64*)
- HPUX_IA64_MODE="64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- if test "$lt_cv_prog_gnu_ld" = yes; then
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -melf32bsmip"
- ;;
- *N32*)
- LD="${LD-ld} -melf32bmipn32"
- ;;
- *64-bit*)
- LD="${LD-ld} -melf64bmip"
- ;;
- esac
- else
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- fi
- rm -rf conftest*
- ;;
-
-x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.o` in
- *32-bit*)
- case $host in
- x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
- ;;
- ppc64-*linux*|powerpc64-*linux*)
- LD="${LD-ld} -m elf32ppclinux"
- ;;
- s390x-*linux*)
- LD="${LD-ld} -m elf_s390"
- ;;
- sparc64-*linux*)
- LD="${LD-ld} -m elf32_sparc"
- ;;
- esac
- ;;
- *64-bit*)
- case $host in
- x86_64-*linux*)
- LD="${LD-ld} -m elf_x86_64"
- ;;
- ppc*-*linux*|powerpc*-*linux*)
- LD="${LD-ld} -m elf64ppc"
- ;;
- s390*-*linux*)
- LD="${LD-ld} -m elf64_s390"
- ;;
- sparc*-*linux*)
- LD="${LD-ld} -m elf64_sparc"
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
- [AC_LANG_PUSH(C)
- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
- AC_LANG_POP])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
-sparc*-*solaris*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.o` in
- *64-bit*)
- case $lt_cv_prog_gnu_ld in
- yes*) LD="${LD-ld} -m elf64_sparc" ;;
- *) LD="${LD-ld} -64" ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
- AC_CHECK_TOOL(AS, as, false)
- AC_CHECK_TOOL(OBJDUMP, objdump, false)
- ;;
- ])
-esac
-
-need_locks="$enable_libtool_lock"
-
-])# _LT_AC_LOCK
-
-
-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])
-AC_CACHE_CHECK([$1], [$2],
- [$2=no
- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$3"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&AS_MESSAGE_LOG_FD
- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- $2=yes
- fi
- fi
- $rm conftest*
-])
-
-if test x"[$]$2" = xyes; then
- ifelse([$5], , :, [$5])
-else
- ifelse([$6], , :, [$6])
-fi
-])# AC_LIBTOOL_COMPILER_OPTION
-
-
-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-# [ACTION-SUCCESS], [ACTION-FAILURE])
-# ------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-[AC_CACHE_CHECK([$1], [$2],
- [$2=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $3"
- printf "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&AS_MESSAGE_LOG_FD
- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- $2=yes
- fi
- else
- $2=yes
- fi
- fi
- $rm conftest*
- LDFLAGS="$save_LDFLAGS"
-])
-
-if test x"[$]$2" = xyes; then
- ifelse([$4], , :, [$4])
-else
- ifelse([$5], , :, [$5])
-fi
-])# AC_LIBTOOL_LINKER_OPTION
-
-
-# AC_LIBTOOL_SYS_MAX_CMD_LEN
-# --------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
-[# find the maximum length of command line arguments
-AC_MSG_CHECKING([the maximum length of command line arguments])
-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
- i=0
- teststring="ABCD"
-
- case $build_os in
- msdosdjgpp*)
- # On DJGPP, this test can blow up pretty badly due to problems in libc
- # (any single argument exceeding 2000 bytes causes a buffer overrun
- # during glob expansion). Even if it were fixed, the result of this
- # check would be larger than it should be.
- lt_cv_sys_max_cmd_len=12288; # 12K is about right
- ;;
-
- gnu*)
- # Under GNU Hurd, this test is not required because there is
- # no limit to the length of command line arguments.
- # Libtool will interpret -1 as no limit whatsoever
- lt_cv_sys_max_cmd_len=-1;
- ;;
-
- cygwin* | mingw*)
- # On Win9x/ME, this test blows up -- it succeeds, but takes
- # about 5 minutes as the teststring grows exponentially.
- # Worse, since 9x/ME are not pre-emptively multitasking,
- # you end up with a "frozen" computer, even though with patience
- # the test eventually succeeds (with a max line length of 256k).
- # Instead, let's just punt: use the minimum linelength reported by
- # all of the supported platforms: 8192 (on NT/2K/XP).
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- amigaos*)
- # On AmigaOS with pdksh, this test takes hours, literally.
- # So we just punt and use a minimum line length of 8192.
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
- # This has been around since 386BSD, at least. Likely further.
- if test -x /sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
- elif test -x /usr/sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
- else
- lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
- fi
- # And add a safety zone
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- ;;
-
- interix*)
- # We know the value 262144 and hardcode it with a safety zone (like BSD)
- lt_cv_sys_max_cmd_len=196608
- ;;
-
- osf*)
- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
- # nice to cause kernel panics so lets avoid the loop below.
- # First set a reasonable default.
- lt_cv_sys_max_cmd_len=16384
- #
- if test -x /sbin/sysconfig; then
- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
- *1*) lt_cv_sys_max_cmd_len=-1 ;;
- esac
- fi
- ;;
- sco3.2v5*)
- lt_cv_sys_max_cmd_len=102400
- ;;
- sysv5* | sco5v6* | sysv4.2uw2*)
- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
- if test -n "$kargmax"; then
- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ 	]]//'`
- else
- lt_cv_sys_max_cmd_len=32768
- fi
- ;;
- *)
- # If test is not a shell built-in, we'll probably end up computing a
- # maximum length that is only half of the actual maximum length, but
- # we can't tell.
- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
- while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
-	 = "XX$teststring") >/dev/null 2>&1 &&
-	 new_result=`expr "X$teststring" : ".*" 2>&1` &&
-	 lt_cv_sys_max_cmd_len=$new_result &&
-	 test $i != 17 # 1/2 MB should be enough
- do
- i=`expr $i + 1`
- teststring=$teststring$teststring
- done
- teststring=
- # Add a significant safety factor because C++ compilers can tack on massive
- # amounts of additional arguments before passing them to the linker.
- # It appears as though 1/2 is a usable value.
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
- ;;
- esac
-])
-if test -n $lt_cv_sys_max_cmd_len ; then
- AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
-else
- AC_MSG_RESULT(none)
-fi
-])# AC_LIBTOOL_SYS_MAX_CMD_LEN
-
-
-# _LT_AC_CHECK_DLFCN
-# ------------------
-AC_DEFUN([_LT_AC_CHECK_DLFCN],
-[AC_CHECK_HEADERS(dlfcn.h)dnl
-])# _LT_AC_CHECK_DLFCN
-
-
-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ---------------------------------------------------------------------
-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
- [$4]
-else
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<EOF
-[#line __oline__ "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-# define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LT_DLGLOBAL		DL_GLOBAL
-# else
-# define LT_DLGLOBAL		0
-# endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LT_DLLAZY_OR_NOW		RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LT_DLLAZY_OR_NOW		DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LT_DLLAZY_OR_NOW	RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LT_DLLAZY_OR_NOW	DL_NOW
-# else
-# define LT_DLLAZY_OR_NOW	0
-# endif
-# endif
-# endif
-# endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
- int status = $lt_dlunknown;
-
- if (self)
- {
- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
- /* dlclose (self); */
- }
- else
- puts (dlerror ());
-
- exit (status);
-}]
-EOF
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
- lt_status=$?
- case x$lt_status in
- x$lt_dlno_uscore) $1 ;;
- x$lt_dlneed_uscore) $2 ;;
- x$lt_dlunknown|x*) $3 ;;
- esac
- else :
- # compilation failed
- $3
- fi
-fi
-rm -fr conftest*
-])# _LT_AC_TRY_DLOPEN_SELF
-
-
-# AC_LIBTOOL_DLOPEN_SELF
-# ----------------------
-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
- enable_dlopen=unknown
- enable_dlopen_self=unknown
- enable_dlopen_self_static=unknown
-else
- lt_cv_dlopen=no
- lt_cv_dlopen_libs=
-
- case $host_os in
- beos*)
- lt_cv_dlopen="load_add_on"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
- ;;
-
- mingw* | pw32*)
- lt_cv_dlopen="LoadLibrary"
- lt_cv_dlopen_libs=
- ;;
-
- cygwin*)
- lt_cv_dlopen="dlopen"
- lt_cv_dlopen_libs=
- ;;
-
- darwin*)
- # if libdl is installed we need to link against it
- AC_CHECK_LIB([dl], [dlopen],
-		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
- lt_cv_dlopen="dyld"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
- ])
- ;;
-
- *)
- AC_CHECK_FUNC([shl_load],
-	 [lt_cv_dlopen="shl_load"],
- [AC_CHECK_LIB([dld], [shl_load],
-	 [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
-	[AC_CHECK_FUNC([dlopen],
-	 [lt_cv_dlopen="dlopen"],
-	 [AC_CHECK_LIB([dl], [dlopen],
-		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-	 [AC_CHECK_LIB([svld], [dlopen],
-		 [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-	 [AC_CHECK_LIB([dld], [dld_link],
-		 [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
-	 ])
-	 ])
-	 ])
-	])
- ])
- ;;
- esac
-
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
- enable_dlopen=no
- fi
-
- case $lt_cv_dlopen in
- dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
- save_LDFLAGS="$LDFLAGS"
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
- save_LIBS="$LIBS"
- LIBS="$lt_cv_dlopen_libs $LIBS"
-
- AC_CACHE_CHECK([whether a program can dlopen itself],
-	 lt_cv_dlopen_self, [dnl
-	 _LT_AC_TRY_DLOPEN_SELF(
-	 lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-	 lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
- ])
-
- if test "x$lt_cv_dlopen_self" = xyes; then
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
- AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
- 	 lt_cv_dlopen_self_static, [dnl
-	 _LT_AC_TRY_DLOPEN_SELF(
-	 lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-	 lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
- ])
- fi
-
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
- ;;
- esac
-
- case $lt_cv_dlopen_self in
- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
- *) enable_dlopen_self=unknown ;;
- esac
-
- case $lt_cv_dlopen_self_static in
- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
- *) enable_dlopen_self_static=unknown ;;
- esac
-fi
-])# AC_LIBTOOL_DLOPEN_SELF
-
-
-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
-# ---------------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler
-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
- $rm -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&AS_MESSAGE_LOG_FD
- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
- fi
- fi
- chmod u+w . 2>&AS_MESSAGE_LOG_FD
- $rm conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
- $rm out/* && rmdir out
- cd ..
- rmdir conftest
- $rm conftest*
-])
-])# AC_LIBTOOL_PROG_CC_C_O
-
-
-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
-# -----------------------------------------
-# Check to see if we can do hard links to lock some files if needed
-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
-[AC_REQUIRE([_LT_AC_LOCK])dnl
-
-hard_links="nottested"
-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- AC_MSG_CHECKING([if we can lock with hard links])
- hard_links=yes
- $rm conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- AC_MSG_RESULT([$hard_links])
- if test "$hard_links" = no; then
- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
-
-
-# AC_LIBTOOL_OBJDIR
-# -----------------
-AC_DEFUN([AC_LIBTOOL_OBJDIR],
-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
-[rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
- lt_cv_objdir=.libs
-else
- # MS-DOS does not allow filenames that begin with a dot.
- lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null])
-objdir=$lt_cv_objdir
-])# AC_LIBTOOL_OBJDIR
-
-
-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
-# ----------------------------------------------
-# Check hardcoding attributes.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
-[AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_AC_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
- test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
-
- # We can hardcode non-existant directories.
- if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
- test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
- # Linking always hardcodes the temporary library directory.
- _LT_AC_TAGVAR(hardcode_action, $1)=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- _LT_AC_TAGVAR(hardcode_action, $1)=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
-fi
-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
-
-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
-
-
-# AC_LIBTOOL_SYS_LIB_STRIP
-# ------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
-[striplib=
-old_striplib=
-AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
- AC_MSG_RESULT([yes])
-else
-# FIXME - insert some real tests, host_os isn't really good enough
- case $host_os in
- darwin*)
- if test -n "$STRIP" ; then
- striplib="$STRIP -x"
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
-fi
- ;;
- *)
- AC_MSG_RESULT([no])
- ;;
- esac
-fi
-])# AC_LIBTOOL_SYS_LIB_STRIP
-
-
-# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-# -----------------------------
-# PORTME Fill in your ld.so characteristics
-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-[AC_MSG_CHECKING([dynamic linker characteristics])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
- # if the path contains ";" then we assume it to be the separator
- # otherwise default to the standard path separator (i.e. ":") - it is
- # assumed that no part of a normal pathname contains ";" but that should
- # okay in the real world where ";" in dirpaths is itself problematic.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
-else
- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
-
-aix4* | aix5*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[[01]] | aix4.[[01]].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	 echo ' yes '
-	 echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
- else
-	can_build_shared=no
- fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/$[[^/]]*$\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
-
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-
-bsdi[[45]]*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
-
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32*)
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $rm \$dlpath'
- shlibpath_overrides_runpath=yes
-
- case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
- ;;
- mingw*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
- ;;
-
- *)
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
- if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
- else
- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
- fi
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
- ;;
-
-dgux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-freebsd1*)
- dynamic_linker=no
- ;;
-
-kfreebsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='GNU ld.so'
- ;;
-
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[[123]]*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[[01]]* | freebsdelf3.[[01]]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
- freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- freebsd*) # from 4.6 on
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
-
-interix3*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
-	else
-		version_type=irix
-	fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
- ;;
-
-# This must be Linux ELF.
-linux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-netbsdelf*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='NetBSD ld.elf_so'
- ;;
-
-knetbsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='GNU ld.so'
- ;;
-
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-nto-qnx*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-openbsd*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[[89]] | openbsd2.[[89]].*)
-	shlibpath_overrides_runpath=no
-	;;
- *)
-	shlibpath_overrides_runpath=yes
-	;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
-
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
-
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-	;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
-
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-
-
-# _LT_AC_TAGCONFIG
-# ----------------
-AC_DEFUN([_LT_AC_TAGCONFIG],
-[AC_ARG_WITH([tags],
- [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
- [include additional configurations @<:@automatic@:>@])],
- [tagnames="$withval"])
-
-if test -f "$ltmain" && test -n "$tagnames"; then
- if test ! -f "${ofile}"; then
- AC_MSG_WARN([output file `$ofile' does not exist])
- fi
-
- if test -z "$LTCC"; then
- eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
- if test -z "$LTCC"; then
- AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
- else
- AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
- fi
- fi
- if test -z "$LTCFLAGS"; then
- eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
- fi
-
- # Extract list of available tagged configurations in $ofile.
- # Note that this assumes the entire list is on one line.
- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=$.*$$/\1/' -e 's/\"//g'`
-
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for tagname in $tagnames; do
- IFS="$lt_save_ifs"
- # Check whether tagname contains only valid characters
- case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
- "") ;;
- *) AC_MSG_ERROR([invalid tag name: $tagname])
-	;;
- esac
-
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
- then
- AC_MSG_ERROR([tag name \"$tagname\" already exists])
- fi
-
- # Update the list of available tags.
- if test -n "$tagname"; then
- echo appending configuration tag \"$tagname\" to $ofile
-
- case $tagname in
- CXX)
-	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-	 ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-	 (test "X$CXX" != "Xg++"))) ; then
-	 AC_LIBTOOL_LANG_CXX_CONFIG
-	else
-	 tagname=""
-	fi
-	;;
-
- F77)
-	if test -n "$F77" && test "X$F77" != "Xno"; then
-	 AC_LIBTOOL_LANG_F77_CONFIG
-	else
-	 tagname=""
-	fi
-	;;
-
- GCJ)
-	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-	 AC_LIBTOOL_LANG_GCJ_CONFIG
-	else
-	 tagname=""
-	fi
-	;;
-
- RC)
-	AC_LIBTOOL_LANG_RC_CONFIG
-	;;
-
- *)
-	AC_MSG_ERROR([Unsupported tag name: $tagname])
-	;;
- esac
-
- # Append the new tag name to the list of available tags.
- if test -n "$tagname" ; then
- available_tags="$available_tags $tagname"
- fi
- fi
- done
- IFS="$lt_save_ifs"
-
- # Now substitute the updated list of available tags.
- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
- mv "${ofile}T" "$ofile"
- chmod +x "$ofile"
- else
- rm -f "${ofile}T"
- AC_MSG_ERROR([unable to update list of available tagged configurations.])
- fi
-fi
-])# _LT_AC_TAGCONFIG
-
-
-# AC_LIBTOOL_DLOPEN
-# -----------------
-# enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN],
- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_DLOPEN
-
-
-# AC_LIBTOOL_WIN32_DLL
-# --------------------
-# declare package support for building win32 DLLs
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_WIN32_DLL
-
-
-# AC_ENABLE_SHARED([DEFAULT])
-# ---------------------------
-# implement the --enable-shared flag
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([shared],
- [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-	[build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_shared=yes ;;
- no) enable_shared=no ;;
- *)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	 enable_shared=yes
-	fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
-])# AC_ENABLE_SHARED
-
-
-# AC_DISABLE_SHARED
-# -----------------
-# set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)
-])# AC_DISABLE_SHARED
-
-
-# AC_ENABLE_STATIC([DEFAULT])
-# ---------------------------
-# implement the --enable-static flag
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([static],
- [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-	[build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_static=yes ;;
- no) enable_static=no ;;
- *)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	 enable_static=yes
-	fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_static=]AC_ENABLE_STATIC_DEFAULT)
-])# AC_ENABLE_STATIC
-
-
-# AC_DISABLE_STATIC
-# -----------------
-# set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)
-])# AC_DISABLE_STATIC
-
-
-# AC_ENABLE_FAST_INSTALL([DEFAULT])
-# ---------------------------------
-# implement the --enable-fast-install flag
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([fast-install],
- [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
- [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_fast_install=yes ;;
- no) enable_fast_install=no ;;
- *)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	 enable_fast_install=yes
-	fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
-])# AC_ENABLE_FAST_INSTALL
-
-
-# AC_DISABLE_FAST_INSTALL
-# -----------------------
-# set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)
-])# AC_DISABLE_FAST_INSTALL
-
-
-# AC_LIBTOOL_PICMODE([MODE])
-# --------------------------
-# implement the --with-pic flag
-# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)
-])# AC_LIBTOOL_PICMODE
-
-
-# AC_PROG_EGREP
-# -------------
-# This is predefined starting with Autoconf 2.54, so this conditional
-# definition can be removed once we require Autoconf 2.54 or later.
-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
-[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
- [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
- then ac_cv_prog_egrep='grep -E'
- else ac_cv_prog_egrep='egrep'
- fi])
- EGREP=$ac_cv_prog_egrep
- AC_SUBST([EGREP])
-])])
-
-
-# AC_PATH_TOOL_PREFIX
-# -------------------
-# find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-[[\\/*] | ?:[\\/]*])
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
- ;;
-*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word. This closes a longstanding sh security hole.
- ac_dummy="ifelse([$2], , $PATH, [$2])"
- for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$1; then
- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
- if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	 file_magic_regex=`expr "$deplibs_check_method" : "file_magic $.*$"`
-	 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	 if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	 $EGREP "$file_magic_regex" > /dev/null; then
-	 :
-	 else
-	 cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	 fi ;;
-	esac
- fi
- break
- fi
- done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
- ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- AC_MSG_RESULT($MAGIC_CMD)
-else
- AC_MSG_RESULT(no)
-fi
-])# AC_PATH_TOOL_PREFIX
-
-
-# AC_PATH_MAGIC
-# -------------
-# find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
- if test -n "$ac_tool_prefix"; then
- AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
- else
- MAGIC_CMD=:
- fi
-fi
-])# AC_PATH_MAGIC
-
-
-# AC_PROG_LD
-# ----------
-# find the pathname to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH([gnu-ld],
- [AC_HELP_STRING([--with-gnu-ld],
-	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
- [test "$withval" = no || with_gnu_ld=yes],
- [with_gnu_ld=no])
-AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by $CC])
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [[\\/]]* | ?:[[\\/]]*)
- re_direlt='/[[^/]][[^/]]*/\.\./'
- # Canonicalize the pathname of ld
- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some variants of GNU ld only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
-	;;
- *)
-	test "$with_gnu_ld" != yes && break
-	;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
-else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
-else
- AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])# AC_PROG_LD
-
-
-# AC_PROG_LD_GNU
-# --------------
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- lt_cv_prog_gnu_ld=yes
- ;;
-*)
- lt_cv_prog_gnu_ld=no
- ;;
-esac])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])# AC_PROG_LD_GNU
-
-
-# AC_PROG_LD_RELOAD_FLAG
-# ----------------------
-# find reload flag for linker
-# -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files],
- lt_cv_ld_reload_flag,
- [lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
- darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
- else
- reload_cmds='$LD$reload_flag -o $output$reload_objs'
- fi
- ;;
-esac
-])# AC_PROG_LD_RELOAD_FLAG
-
-
-# AC_DEPLIBS_CHECK_METHOD
-# -----------------------
-# how to check for library dependencies
-# -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependent libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix4* | aix5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-beos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-bsdi[[45]]*)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=/shlib/libc.so
- ;;
-
-cygwin*)
- # func_win32_libid is a shell function defined in ltmain.sh
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- ;;
-
-mingw* | pw32*)
- # Base MSYS/MinGW do not provide the 'file' command needed by
- # func_win32_libid shell function, so use a weaker test based on 'objdump'.
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- ;;
-
-darwin* | rhapsody*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-freebsd* | kfreebsd*-gnu | dragonfly*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- case $host_cpu in
- i*86 )
- # Not sure whether the presence of OpenBSD here was a mistake.
- # Let's accept both of them until this is cleared up.
- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- ;;
- esac
- else
- lt_cv_deplibs_check_method=pass_all
- fi
- ;;
-
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-hpux10.20* | hpux11*)
- lt_cv_file_magic_cmd=/usr/bin/file
- case $host_cpu in
- ia64*)
- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
- ;;
- hppa*64*)
- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
- ;;
- *)
- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
- ;;
- esac
- ;;
-
-interix3*)
- # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $LD in
- *-32|*"-32 ") libmagic=32-bit;;
- *-n32|*"-n32 ") libmagic=N32;;
- *-64|*"-64 ") libmagic=64-bit;;
- *) libmagic=never-match;;
- esac
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-# This must be Linux ELF.
-linux*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
- fi
- ;;
-
-newos6*)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libnls.so
- ;;
-
-nto-qnx*)
- lt_cv_deplibs_check_method=unknown
- ;;
-
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
- fi
- ;;
-
-osf3* | osf4* | osf5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-solaris*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sysv4 | sysv4.3*)
- case $host_vendor in
- motorola)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
- ncr)
- lt_cv_deplibs_check_method=pass_all
- ;;
- sequent)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
- ;;
- sni)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
- siemens)
- lt_cv_deplibs_check_method=pass_all
- ;;
- pc)
- lt_cv_deplibs_check_method=pass_all
- ;;
- esac
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-])# AC_DEPLIBS_CHECK_METHOD
-
-
-# AC_PROG_NM
-# ----------
-# find the pathname to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
-[if test -n "$NM"; then
- # Let the user override the test.
- lt_cv_path_NM="$NM"
-else
- lt_nm_to_check="${ac_tool_prefix}nm"
- if test -n "$ac_tool_prefix" && test "$build" = "$host"; then 
- lt_nm_to_check="$lt_nm_to_check nm"
- fi
- for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-	# Check to see if the nm accepts a BSD-compat flag.
-	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
-	# nm: unknown option "B" ignored
-	# Tru64's nm complains that /dev/null is an invalid object file
-	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-	*/dev/null* | *'Invalid file or object type'*)
-	 lt_cv_path_NM="$tmp_nm -B"
-	 break
-	 ;;
-	*)
-	 case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-	 */dev/null*)
-	 lt_cv_path_NM="$tmp_nm -p"
-	 break
-	 ;;
-	 *)
-	 lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	 continue # so that we can try to find one that supports BSD flags
-	 ;;
-	 esac
-	 ;;
-	esac
- fi
- done
- IFS="$lt_save_ifs"
- done
- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-])# AC_PROG_NM
-
-
-# AC_CHECK_LIBM
-# -------------
-# check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
- # These system don't have libm, or don't need it
- ;;
-*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
- ;;
-*)
- AC_CHECK_LIB(m, cos, LIBM="-lm")
- ;;
-esac
-])# AC_CHECK_LIBM
-
-
-# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl convenience library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-convenience to the configure arguments. Note that
-# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
-# it is assumed to be `libltdl'. LIBLTDL will be prefixed with
-# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
-# (note the single quotes!). If your package is not flat and you're not
-# using automake, define top_builddir and top_srcdir appropriately in
-# the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- case $enable_ltdl_convenience in
- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
- "") enable_ltdl_convenience=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
- esac
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
- # For backwards non-gettext consistent compatibility...
- INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_CONVENIENCE
-
-
-# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl installable library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-install to the configure arguments. Note that
-# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
-# and an installed libltdl is not found, it is assumed to be `libltdl'.
-# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
-# '${top_srcdir}/' (note the single quotes!). If your package is not
-# flat and you're not using automake, define top_builddir and top_srcdir
-# appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- AC_CHECK_LIB(ltdl, lt_dlinit,
- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
- [if test x"$enable_ltdl_install" = xno; then
- AC_MSG_WARN([libltdl not installed, but installation disabled])
- else
- enable_ltdl_install=yes
- fi
- ])
- if test x"$enable_ltdl_install" = x"yes"; then
- ac_configure_args="$ac_configure_args --enable-ltdl-install"
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
- else
- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
- LIBLTDL="-lltdl"
- LTDLINCL=
- fi
- # For backwards non-gettext consistent compatibility...
- INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_INSTALLABLE
-
-
-# AC_LIBTOOL_CXX
-# --------------
-# enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX],
-[AC_REQUIRE([_LT_AC_LANG_CXX])
-])# AC_LIBTOOL_CXX
-
-
-# _LT_AC_LANG_CXX
-# ---------------
-AC_DEFUN([_LT_AC_LANG_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
-])# _LT_AC_LANG_CXX
-
-# _LT_AC_PROG_CXXCPP
-# ------------------
-AC_DEFUN([_LT_AC_PROG_CXXCPP],
-[
-AC_REQUIRE([AC_PROG_CXX])
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
- AC_PROG_CXXCPP
-fi
-])# _LT_AC_PROG_CXXCPP
-
-# AC_LIBTOOL_F77
-# --------------
-# enable support for Fortran 77 libraries
-AC_DEFUN([AC_LIBTOOL_F77],
-[AC_REQUIRE([_LT_AC_LANG_F77])
-])# AC_LIBTOOL_F77
-
-
-# _LT_AC_LANG_F77
-# ---------------
-AC_DEFUN([_LT_AC_LANG_F77],
-[AC_REQUIRE([AC_PROG_F77])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
-])# _LT_AC_LANG_F77
-
-
-# AC_LIBTOOL_GCJ
-# --------------
-# enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],
-[AC_REQUIRE([_LT_AC_LANG_GCJ])
-])# AC_LIBTOOL_GCJ
-
-
-# _LT_AC_LANG_GCJ
-# ---------------
-AC_DEFUN([_LT_AC_LANG_GCJ],
-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-	 [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-	 [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
-])# _LT_AC_LANG_GCJ
-
-
-# AC_LIBTOOL_RC
-# -------------
-# enable support for Windows resource files
-AC_DEFUN([AC_LIBTOOL_RC],
-[AC_REQUIRE([LT_AC_PROG_RC])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
-])# AC_LIBTOOL_RC
-
-
-# AC_LIBTOOL_LANG_C_CONFIG
-# ------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
-AC_DEFUN([_LT_AC_LANG_C_CONFIG],
-[lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}\n'
-
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_DLOPEN_SELF
-
-# Report which library types will actually be built
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-
-aix4* | aix5*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_C_CONFIG
-
-
-# AC_LIBTOOL_LANG_CXX_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
-AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
-[AC_LANG_PUSH(C++)
-AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Dependencies to place before and after the object being linked:
-_LT_AC_TAGVAR(predep_objects, $1)=
-_LT_AC_TAGVAR(postdep_objects, $1)=
-_LT_AC_TAGVAR(predeps, $1)=
-_LT_AC_TAGVAR(postdeps, $1)=
-_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
-
-# Object file extension for compiled C++ test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }\n'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_LD=$LD
-lt_save_GCC=$GCC
-GCC=$GXX
-lt_save_with_gnu_ld=$with_gnu_ld
-lt_save_path_LD=$lt_cv_path_LD
-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-else
- $as_unset lt_cv_prog_gnu_ld
-fi
-if test -n "${lt_cv_path_LDCXX+set}"; then
- lt_cv_path_LD=$lt_cv_path_LDCXX
-else
- $as_unset lt_cv_path_LD
-fi
-test -z "${LDCXX+set}" || LD=$LDCXX
-CC=${CXX-"c++"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-else
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-fi
-
-if test "$GXX" = yes; then
- # Set up default GNU C++ configuration
-
- AC_PROG_LD
-
- # Check if GNU C++ uses GNU ld as the underlying linker, since the
- # archiving commands below assume that GNU ld is being used.
- if test "$with_gnu_ld" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
- # If archive_cmds runs LD, not CC, wlarc should be empty
- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
- # investigate it a little bit more. (MM)
- wlarc='${wl}'
-
- # ancient GNU ld didn't support --whole-archive et. al.
- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-	grep 'no-whole-archive' > /dev/null; then
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- else
- with_gnu_ld=no
- wlarc=
-
- # A generic and very simple default shared library creation
- # command for GNU C++ for the case where it uses the native
- # linker, instead of GNU ld. If possible, this setting should
- # overridden to take advantage of the native linker features on
- # the platform it is being used on.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- fi
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-else
- GXX=no
- with_gnu_ld=no
- wlarc=
-fi
-
-# PORTME: fill in a description of your system's C++ link characteristics
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-case $host_os in
- aix3*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- aix4* | aix5*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-	for ld_flag in $LDFLAGS; do
-	 case $ld_flag in
-	 *-brtl*)
-	 aix_use_runtimelinking=yes
-	 break
-	 ;;
-	 esac
-	done
-	;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- _LT_AC_TAGVAR(archive_cmds, $1)=''
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
- if test "$GXX" = yes; then
- case $host_os in aix4.[[012]]|aix4.[[012]].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
-	collect2name=`${CC} -print-prog-name=collect2`
-	if test -f "$collect2name" && \
-	 strings "$collect2name" | grep resolve_lib_name >/dev/null
-	then
-	 # We have reworked collect2
-	 _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	else
-	 # We have old collect2
-	 _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-	 # It fails to find uninstalled libraries when the uninstalled
-	 # path is not listed in the libpath. Setting hardcode_minus_L
-	 # to unsupported forces relinking
-	 _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	 _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-	fi
-	;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
-	shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
-	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	# chokes on -Wl,-G. The following line is correct:
-	shared_flag='-G'
- else
-	if test "$aix_use_runtimelinking" = yes; then
-	 shared_flag='${wl}-G'
-	else
-	 shared_flag='${wl}-bM:SRE'
-	fi
- fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
-	# Determine the default libpath from the value encoded in an empty executable.
-	_LT_AC_SYS_LIBPATH_AIX
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	# Warning - without using the other run time loading flags,
-	# -berok will link without error, but may produce a broken library.
-	_LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	# Exported symbols can be pulled into shared objects from archives
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-	# This is similar to how AIX traditionally builds its shared libraries.
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- chorus*)
- case $cc_basename in
- *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
- esac
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
- # as there is no search path for DLLs.
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(always_export_symbols, $1)=no
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	cp $export_symbols $output_objdir/$soname.def;
- else
-	echo EXPORTS > $output_objdir/$soname.def;
-	cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
- if test "$GXX" = yes ; then
- lt_int_apple_cc_single_mod=no
- output_verbose_link_cmd='echo'
- if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
- lt_int_apple_cc_single_mod=yes
- fi
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- fi
- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- fi
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- fi
- ;;
-
- dgux*)
- case $cc_basename in
- ec++*)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
- ghcx*)
-	# Green Hills C++ Compiler
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
- *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
- esac
- ;;
- freebsd[[12]]*)
- # C++ shared libraries reported to be fairly broken before switch to ELF
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- freebsd-elf*)
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- ;;
- freebsd* | kfreebsd*-gnu | dragonfly*)
- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
- # conventions
- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
- ;;
- gnu*)
- ;;
- hpux9*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-				# but as the default
-				# location of the library.
-
- case $cc_basename in
- CC*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- aCC*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
- hpux10*|hpux11*)
- if test $with_gnu_ld = no; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- case $host_cpu in
- hppa*64*|ia64*)
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
- ;;
- *)
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- ;;
- esac
- fi
- case $host_cpu in
- hppa*64*|ia64*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
- *)
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-					 # but as the default
-					 # location of the library.
- ;;
- esac
-
- case $cc_basename in
- CC*)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
- aCC*)
-	case $host_cpu in
-	hppa*64*)
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	 ;;
-	ia64*)
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	 ;;
-	*)
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	 ;;
-	esac
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
- *)
-	if test "$GXX" = yes; then
-	 if test $with_gnu_ld = no; then
-	 case $host_cpu in
-	 hppa*64*)
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	 ;;
-	 ia64*)
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	 ;;
-	 *)
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	 ;;
-	 esac
-	 fi
-	else
-	 # FIXME: insert proper C++ library support
-	 _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
- esac
- ;;
- interix3*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
- irix5* | irix6*)
- case $cc_basename in
- CC*)
-	# SGI C++
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	# Archives containing C++ object files must be created using
-	# "CC -ar", where "CC" is the IRIX C++ compiler. This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-	;;
- *)
-	if test "$GXX" = yes; then
-	 if test "$with_gnu_ld" = no; then
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	 else
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-	 fi
-	fi
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-	;;
- esac
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
- linux*)
- case $cc_basename in
- KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-	;;
- icpc*)
-	# Intel C++
-	with_gnu_ld=yes
-	# version 8.0 and above of icpc choke on multiply defined symbols
-	# if we add $predep_objects and $postdep_objects, however 7.1 and
-	# earlier do not add the objects themselves.
-	case `$CC -V 2>&1` in
-	*"Version 7."*)
- 	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- 	 _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	 ;;
-	*) # Version 8.0 or newer
-	 tmp_idyn=
-	 case $host_cpu in
-	 ia64*) tmp_idyn=' -i_dynamic';;
-	 esac
- 	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	 _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	 ;;
-	esac
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	;;
- pgCC*)
- # Portland Group C++ compiler
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- 	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- ;;
- cxx*)
-	# Compaq C++
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
-	runpath_var=LD_RUN_PATH
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/$^.*ld.*$$ .*ld .*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
- esac
- ;;
- lynxos*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- m88k*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- mvs*)
- case $cc_basename in
- cxx*)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
- *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
- esac
- ;;
- netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
- wlarc=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- fi
- # Workaround some broken pre-1.5 toolchains
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
- ;;
- openbsd2*)
- # C++ shared libraries are fairly broken
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- openbsd*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- fi
- output_verbose_link_cmd='echo'
- ;;
- osf3*)
- case $cc_basename in
- KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-
-	;;
- RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
- cxx*)
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/$^.*ld.*$$ .*ld.*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
- *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	 _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
-	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	 _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	 # Commands to make compiler produce verbose output that lists
-	 # what "hidden" libraries, object files and flags are used when
-	 # linking a shared library.
-	 output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-	else
-	 # FIXME: insert proper C++ library support
-	 _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
- esac
- ;;
- osf4* | osf5*)
- case $cc_basename in
- KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Archives containing C++ object files must be created using
-	# the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-	;;
- RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
- cxx*)
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-	 echo "-hidden">> $lib.exp~
-	 $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
-	 $rm $lib.exp'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/$^.*ld.*$$ .*ld.*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
- *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	 _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
-	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	 _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	 # Commands to make compiler produce verbose output that lists
-	 # what "hidden" libraries, object files and flags are used when
-	 # linking a shared library.
-	 output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-	else
-	 # FIXME: insert proper C++ library support
-	 _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
- esac
- ;;
- psos*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- sunos4*)
- case $cc_basename in
- CC*)
-	# Sun C++ 4.x
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
- lcc*)
-	# Lucid
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
- *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
- esac
- ;;
- solaris*)
- case $cc_basename in
- CC*)
-	# Sun C++ 4.2, 5.x and Centerline C++
- _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
-	_LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	$CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	case $host_os in
-	 solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-	 *)
-	 # The C++ compiler is used as linker so we must use $wl
-	 # flag to pass the commands to the underlying system
-	 # linker. We must also pass each convience library through
-	 # to the system linker between allextract/defaultextract.
-	 # The C++ compiler will combine linker options so we
-	 # cannot just pass the convience library names through
-	 # without $wl.
-	 # Supported since Solaris 2.6 (maybe 2.5.1?)
-	 _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
-	 ;;
-	esac
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-	output_verbose_link_cmd='echo'
-
-	# Archives containing C++ object files must be created using
-	# "CC -xar", where "CC" is the Sun C++ compiler. This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-	;;
- gcx*)
-	# Green Hills C++ Compiler
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
-	# The C++ compiler must be used to create the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-	;;
- *)
-	# GNU C++ compiler with Solaris linker
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	 _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-	 if $CC --version | grep -v '^2\.7' > /dev/null; then
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	 _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	 # Commands to make compiler produce verbose output that lists
-	 # what "hidden" libraries, object files and flags are used when
-	 # linking a shared library.
-	 output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	 else
-	 # g++ 2.7 appears to require `-G' NOT `-shared' on this
-	 # platform.
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	 _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	 # Commands to make compiler produce verbose output that lists
-	 # what "hidden" libraries, object files and flags are used when
-	 # linking a shared library.
-	 output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	 fi
-
-	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-	fi
-	;;
- esac
- ;;
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
- *)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
- esac
- ;;
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- # For security reasons, it is highly recommended that you always
- # use absolute paths for naming shared libraries, and exclude the
- # DT_RUNPATH tag from executables and libraries. But doing so
- # requires that you compile everything twice, which is a pain.
- # So that behaviour is only enabled if SCOABSPATH is set to a
- # non-empty value in the environment. Most likely only useful for
- # creating official distributions of packages.
- # This is a hack until libtool officially supports absolute path
- # names for shared libraries.
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
- *)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
- esac
- ;;
- tandem*)
- case $cc_basename in
- NCC*)
-	# NonStop-UX NCC 3.20
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
- *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
- esac
- ;;
- vxworks*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
-esac
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-_LT_AC_TAGVAR(GCC, $1)="$GXX"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_POSTDEP_PREDEP($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC=$lt_save_CC
-LDCXX=$LD
-LD=$lt_save_LD
-GCC=$lt_save_GCC
-with_gnu_ldcxx=$with_gnu_ld
-with_gnu_ld=$lt_save_with_gnu_ld
-lt_cv_path_LDCXX=$lt_cv_path_LD
-lt_cv_path_LD=$lt_save_path_LD
-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-])# AC_LIBTOOL_LANG_CXX_CONFIG
-
-# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
-# ------------------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
-dnl we can't use the lt_simple_compile_test_code here,
-dnl because it contains code intended for an executable,
-dnl not a library. It's possible we should let each
-dnl tag define a new lt_????_link_test_code variable,
-dnl but it's only used here...
-ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
-int a;
-void foo (void) { a = 0; }
-EOF
-],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
- Foo (void) { a = 0; }
-private:
- int a;
-};
-EOF
-],[$1],[F77],[cat > conftest.$ac_ext <<EOF
- subroutine foo
- implicit none
- integer*4 a
- a=0
- return
- end
-EOF
-],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
-public class foo {
- private int a;
- public void bar (void) {
- a = 0;
- }
-};
-EOF
-])
-dnl Parse the compiler output and extract the necessary
-dnl objects, libraries and library flags.
-if AC_TRY_EVAL(ac_compile); then
- # Parse the compiler output and extract the necessary
- # objects, libraries and library flags.
-
- # Sentinel used to keep track of whether or not we are before
- # the conftest object file.
- pre_test_object_deps_done=no
-
- # The `*' in the case matches for architectures that use `case' in
- # $output_verbose_cmd can trigger glob expansion during the loop
- # eval without this substitution.
- output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-
- for p in `eval $output_verbose_link_cmd`; do
- case $p in
-
- -L* | -R* | -l*)
- # Some compilers place space between "-{L,R}" and the path.
- # Remove the space.
- if test $p = "-L" \
-	 || test $p = "-R"; then
-	 prev=$p
-	 continue
- else
-	 prev=
- fi
-
- if test "$pre_test_object_deps_done" = no; then
-	 case $p in
-	 -L* | -R*)
-	 # Internal compiler library paths should come after those
-	 # provided the user. The postdeps already come after the
-	 # user supplied libs so there is no need to process them.
-	 if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-	 _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-	 else
-	 _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-	 fi
-	 ;;
-	 # The "-l" case would never come before the object being
-	 # linked, so don't bother handling this case.
-	 esac
- else
-	 if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-	 _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-	 else
-	 _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-	 fi
- fi
- ;;
-
- *.$objext)
- # This assumes that the test object file only shows up
- # once in the compiler output.
- if test "$p" = "conftest.$objext"; then
-	 pre_test_object_deps_done=yes
-	 continue
- fi
-
- if test "$pre_test_object_deps_done" = no; then
-	 if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-	 _LT_AC_TAGVAR(predep_objects, $1)="$p"
-	 else
-	 _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-	 fi
- else
-	 if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-	 _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-	 else
-	 _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-	 fi
- fi
- ;;
-
- *) ;; # Ignore the rest.
-
- esac
- done
-
- # Clean up.
- rm -f a.out a.exe
-else
- echo "libtool.m4: error: problem compiling $1 test program"
-fi
-
-$rm -f confest.$objext
-
-# PORTME: override above test on systems where it is broken
-ifelse([$1],[CXX],
-[case $host_os in
-interix3*)
- # Interix 3.5 installs completely hosed .la files for C++, so rather than
- # hack all around it, let's just trust "g++" to DTRT.
- _LT_AC_TAGVAR(predep_objects,$1)=
- _LT_AC_TAGVAR(postdep_objects,$1)=
- _LT_AC_TAGVAR(postdeps,$1)=
- ;;
-
-solaris*)
- case $cc_basename in
- CC*)
- # Adding this requires a known-good setup of shared libraries for
- # Sun compiler versions before 5.6, else PIC objects from an old
- # archive will be linked into the output, leading to subtle bugs.
- _LT_AC_TAGVAR(postdeps,$1)='-lCstd -lCrun'
- ;;
- esac
- ;;
-esac
-])
-
-case " $_LT_AC_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-esac
-])# AC_LIBTOOL_POSTDEP_PREDEP
-
-# AC_LIBTOOL_LANG_F77_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
-AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
-[AC_REQUIRE([AC_PROG_F77])
-AC_LANG_PUSH(Fortran 77)
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code=" subroutine t\n return\n end\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code=" program t\n end\n"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${F77-"f77"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-aix4* | aix5*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-_LT_AC_TAGVAR(GCC, $1)="$G77"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_F77_CONFIG
-
-
-# AC_LIBTOOL_LANG_GCJ_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
-AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }\n'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_GCJ_CONFIG
-
-
-# AC_LIBTOOL_LANG_RC_CONFIG
-# -------------------------
-# Ensure that the configuration vars for the Windows resource compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
-AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_RC_CONFIG
-
-
-# AC_LIBTOOL_CONFIG([TAGNAME])
-# ----------------------------
-# If TAGNAME is not passed, then create an initial libtool script
-# with a default configuration from the untagged config vars. Otherwise
-# add code to config.status for appending the configuration named by
-# TAGNAME from the matching tagged config vars.
-AC_DEFUN([AC_LIBTOOL_CONFIG],
-[# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- _LT_AC_TAGVAR(compiler, $1) \
- _LT_AC_TAGVAR(CC, $1) \
- _LT_AC_TAGVAR(LD, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
- _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
- _LT_AC_TAGVAR(old_archive_cmds, $1) \
- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
- _LT_AC_TAGVAR(predep_objects, $1) \
- _LT_AC_TAGVAR(postdep_objects, $1) \
- _LT_AC_TAGVAR(predeps, $1) \
- _LT_AC_TAGVAR(postdeps, $1) \
- _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
- _LT_AC_TAGVAR(archive_cmds, $1) \
- _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
- _LT_AC_TAGVAR(postinstall_cmds, $1) \
- _LT_AC_TAGVAR(postuninstall_cmds, $1) \
- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
- _LT_AC_TAGVAR(allow_undefined_flag, $1) \
- _LT_AC_TAGVAR(no_undefined_flag, $1) \
- _LT_AC_TAGVAR(export_symbols_cmds, $1) \
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
- _LT_AC_TAGVAR(hardcode_automatic, $1) \
- _LT_AC_TAGVAR(module_cmds, $1) \
- _LT_AC_TAGVAR(module_expsym_cmds, $1) \
- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
- _LT_AC_TAGVAR(exclude_expsyms, $1) \
- _LT_AC_TAGVAR(include_expsyms, $1); do
-
- case $var in
- _LT_AC_TAGVAR(old_archive_cmds, $1) | \
- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
- _LT_AC_TAGVAR(archive_cmds, $1) | \
- _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
- _LT_AC_TAGVAR(module_cmds, $1) | \
- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
- _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\[$]0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
- ;;
- esac
-
-ifelse([$1], [],
- [cfgfile="${ofile}T"
- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
- $rm -f "$cfgfile"
- AC_MSG_NOTICE([creating $ofile])],
- [cfgfile="$ofile"])
-
- cat <<__EOF__ >> "$cfgfile"
-ifelse([$1], [],
-[#! $SHELL
-
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e 1s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-
-# ### BEGIN LIBTOOL CONFIG],
-[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
-
-# Is the compiler the GNU C compiler?
-with_gcc=$_LT_AC_TAGVAR(GCC, $1)
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
-archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
-module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
-
-# Symbols that must always be exported.
-include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
-
-ifelse([$1],[],
-[# ### END LIBTOOL CONFIG],
-[# ### END LIBTOOL TAG CONFIG: $tagname])
-
-__EOF__
-
-ifelse([$1],[], [
- case $host_os in
- aix3*)
- cat <<\EOF >> "$cfgfile"
-
-# AIX sometimes has problems with the GCC collect2 program. For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
-fi
-EOF
- ;;
- esac
-
- # We use sed instead of cat because bash on DJGPP gets confused if
- # if finds mixed CR/LF and LF-only lines. Since sed operates in
- # text mode, it properly converts lines to CR/LF. This bash problem
- # is reportedly fixed, but why not run on old versions too?
- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-
- mv -f "$cfgfile" "$ofile" || \
- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
- chmod +x "$ofile"
-])
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
-])# AC_LIBTOOL_CONFIG
-
-
-# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-
-_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-
-if test "$GCC" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-
- AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
- lt_cv_prog_compiler_rtti_exceptions,
- [-fno-rtti -fno-exceptions], [],
- [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
-fi
-])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
-
-
-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-# ---------------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([AC_PROG_NM])
-AC_REQUIRE([AC_OBJEXT])
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output from $compiler object])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
-[
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='$[[_A-Za-z]][[_A-Za-z0-9]]*$'
-
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* $.*$$/extern int \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[[^ ]]*$ $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode $[[^ ]]*$ $[[^ ]]*$$/ {\"\2\", (lt_ptr) \&\2},/p'"
-
-# Define system-specific variables.
-case $host_os in
-aix*)
- symcode='[[BCDT]]'
- ;;
-cygwin* | mingw* | pw32*)
- symcode='[[ABCDGISTW]]'
- ;;
-hpux*) # Its linker distinguishes data from code symbols
- if test "$host_cpu" = ia64; then
- symcode='[[ABCDEGRST]]'
- fi
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* $.*$$/extern int \1();/p' -e 's/^$symcode* .* $.*$$/extern char \1;/p'"
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[[^ ]]*$ $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* $[[^ ]]*$ $[[^ ]]*$$/ {\"\2\", (lt_ptr) \&\2},/p'"
- ;;
-linux*)
- if test "$host_cpu" = ia64; then
- symcode='[[ABCDGIRSTW]]'
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* $.*$$/extern int \1();/p' -e 's/^$symcode* .* $.*$$/extern char \1;/p'"
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[[^ ]]*$ $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* $[[^ ]]*$ $[[^ ]]*$$/ {\"\2\", (lt_ptr) \&\2},/p'"
- fi
- ;;
-irix* | nonstopux*)
- symcode='[[BCDEGRST]]'
- ;;
-osf*)
- symcode='[[BCDEGQRST]]'
- ;;
-solaris*)
- symcode='[[BDRT]]'
- ;;
-sco3.2v5*)
- symcode='[[DT]]'
- ;;
-sysv4.2uw2*)
- symcode='[[DT]]'
- ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
- symcode='[[ABDT]]'
- ;;
-sysv4)
- symcode='[[DFNSTU]]'
- ;;
-esac
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
- symcode='[[ABCDGIRSTW]]' ;;
-esac
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
- symxfrm="\\1 $ac_symprfx\\2 \\2"
-
- # Write the raw and C identifiers.
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]$$symcode$symcode*$[[ 	]][[ 	]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- pipe_works=no
-
- rm -f conftest*
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
- if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- nlist=conftest.nm
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
- # Try sorting and uniquifying the output.
- if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
- else
-	rm -f "$nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if grep ' nm_test_var$' "$nlist" >/dev/null; then
-	if grep ' nm_test_func$' "$nlist" >/dev/null; then
-	 cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-	 # Now generate the symbol file.
-	 eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-
-	 cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-lt_preloaded_symbols[[]] =
-{
-EOF
-	 $SED "s/^$symcode$symcode* $.*$ $.*$$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-	 cat <<\EOF >> conftest.$ac_ext
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	 # Now try linking the two files.
-	 mv conftest.$ac_objext conftstm.$ac_objext
-	 lt_save_LIBS="$LIBS"
-	 lt_save_CFLAGS="$CFLAGS"
-	 LIBS="conftstm.$ac_objext"
-	 CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-	 if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-	 pipe_works=yes
-	 fi
-	 LIBS="$lt_save_LIBS"
-	 CFLAGS="$lt_save_CFLAGS"
-	else
-	 echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-	fi
- else
-	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
- fi
- else
- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
- fi
- else
- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
- cat conftest.$ac_ext >&5
- fi
- rm -f conftest* conftst*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
- break
- else
- lt_cv_sys_global_symbol_pipe=
- fi
-done
-])
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
- lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
- AC_MSG_RESULT(failed)
-else
- AC_MSG_RESULT(ok)
-fi
-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-
-
-# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
-# ---------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
-[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
-
-AC_MSG_CHECKING([for $compiler option to produce PIC])
- ifelse([$1],[CXX],[
- # C++ specific cases for pic, static, wl, etc.
- if test "$GXX" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- fi
- ;;
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
- ;;
- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
- mingw* | os2* | pw32*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
- ;;
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
- ;;
- *djgpp*)
- # DJGPP does not support shared libraries at all
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- ;;
- interix3*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
- sysv4*MP*)
- if test -d /usr/nec; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
- fi
- ;;
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
-	;;
- *)
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	;;
- esac
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
- else
- case $host_os in
- aix4* | aix5*)
-	# All AIX code is PIC.
-	if test "$host_cpu" = ia64; then
-	 # AIX 5 now supports IA64 processor
-	 _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	else
-	 _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-	fi
-	;;
- chorus*)
-	case $cc_basename in
-	cxch68*)
-	 # Green Hills C++ Compiler
-	 # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-	 ;;
-	esac
-	;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- ;;
- esac
- ;;
- dgux*)
-	case $cc_basename in
-	 ec++*)
-	 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	 ;;
-	 ghcx*)
-	 # Green Hills C++ Compiler
-	 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	 ;;
-	 *)
-	 ;;
-	esac
-	;;
- freebsd* | kfreebsd*-gnu | dragonfly*)
-	# FreeBSD uses GNU C++
-	;;
- hpux9* | hpux10* | hpux11*)
-	case $cc_basename in
-	 CC*)
-	 _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	 _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-	 if test "$host_cpu" != ia64; then
-	 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	 fi
-	 ;;
-	 aCC*)
-	 _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	 _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-	 case $host_cpu in
-	 hppa*64*|ia64*)
-	 # +Z the default
-	 ;;
-	 *)
-	 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	 ;;
-	 esac
-	 ;;
-	 *)
-	 ;;
-	esac
-	;;
- interix*)
-	# This is c89, which is MS Visual C++ (no shared libs)
-	# Anyone wants to do a port?
-	;;
- irix5* | irix6* | nonstopux*)
-	case $cc_basename in
-	 CC*)
-	 _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	 _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	 # CC pic flag -KPIC is the default.
-	 ;;
-	 *)
-	 ;;
-	esac
-	;;
- linux*)
-	case $cc_basename in
-	 KCC*)
-	 # KAI C++ Compiler
-	 _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	 ;;
-	 icpc* | ecpc*)
-	 # Intel C++
-	 _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	 _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-	 ;;
-	 pgCC*)
-	 # Portland Group C++ compiler.
-	 _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	 _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	 ;;
-	 cxx*)
-	 # Compaq C++
-	 # Make sure the PIC flag is empty. It appears that all Alpha
-	 # Linux and Compaq Tru64 Unix objects are PIC.
-	 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-	 _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	 ;;
-	 *)
-	 ;;
-	esac
-	;;
- lynxos*)
-	;;
- m88k*)
-	;;
- mvs*)
-	case $cc_basename in
-	 cxx*)
-	 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-	 ;;
-	 *)
-	 ;;
-	esac
-	;;
- netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
-	;;
- osf3* | osf4* | osf5*)
-	case $cc_basename in
-	 KCC*)
-	 _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	 ;;
-	 RCC*)
-	 # Rational C++ 2.4.1
-	 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	 ;;
-	 cxx*)
-	 # Digital/Compaq C++
-	 _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	 # Make sure the PIC flag is empty. It appears that all Alpha
-	 # Linux and Compaq Tru64 Unix objects are PIC.
-	 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-	 _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	 ;;
-	 *)
-	 ;;
-	esac
-	;;
- psos*)
-	;;
- solaris*)
-	case $cc_basename in
-	 CC*)
-	 # Sun C++ 4.2, 5.x and Centerline C++
-	 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	 _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	 _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-	 ;;
-	 gcx*)
-	 # Green Hills C++ Compiler
-	 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-	 ;;
-	 *)
-	 ;;
-	esac
-	;;
- sunos4*)
-	case $cc_basename in
-	 CC*)
-	 # Sun C++ 4.x
-	 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	 _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	 ;;
-	 lcc*)
-	 # Lucid
-	 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	 ;;
-	 *)
-	 ;;
-	esac
-	;;
- tandem*)
-	case $cc_basename in
-	 NCC*)
-	 # NonStop-UX NCC 3.20
-	 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	 ;;
-	 *)
-	 ;;
-	esac
-	;;
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-	case $cc_basename in
-	 CC*)
-	 _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	 _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	 ;;
-	esac
-	;;
- vxworks*)
-	;;
- *)
-	_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-	;;
- esac
- fi
-],
-[
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- fi
- ;;
-
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
- ;;
-
- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
-
- mingw* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
- ;;
-
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
- ;;
-
- interix3*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
-
- msdosdjgpp*)
- # Just because we use GCC doesn't mean we suddenly get shared libraries
- # on systems that don't support them.
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- enable_shared=no
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
- fi
- ;;
-
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
-	# +Z the default
-	;;
- *)
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	;;
- esac
- ;;
-
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
- else
- # PORTME Check for flag to pass linker flags through the system compiler.
- case $host_os in
- aix*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- else
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- ;;
- esac
- ;;
-
- mingw* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
- ;;
-
- hpux9* | hpux10* | hpux11*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
-	# +Z the default
-	;;
- *)
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	;;
- esac
- # Is there a better lt_prog_compiler_static that works with the bundled CC?
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- ;;
-
- irix5* | irix6* | nonstopux*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # PIC (with -KPIC) is the default.
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
-
- newsos6)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- linux*)
- case $cc_basename in
- icc* | ecc*)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
- ;;
- pgcc* | pgf77* | pgf90* | pgf95*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
-	# which looks to be a dead project)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- ccc*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # All Alpha code is PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
- esac
- ;;
-
- osf3* | osf4* | osf5*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # All OSF/1 code is PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
-
- solaris*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- case $cc_basename in
- f77* | f90* | f95*)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
- *)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
- esac
- ;;
-
- sunos4*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- sysv4 | sysv4.2uw2* | sysv4.3*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec ;then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- fi
- ;;
-
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- unicos*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- ;;
-
- uts4*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- ;;
- esac
- fi
-])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
- _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
- [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
- [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
- "" | " "*) ;;
- *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
- esac],
- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-fi
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
- ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
- _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
- $lt_tmp_static_flag,
- [],
- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
-])
-
-
-# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
-# ------------------------------------
-# See if the linker supports building shared libraries.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
-[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-ifelse([$1],[CXX],[
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- case $host_os in
- aix4* | aix5*)
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
- else
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
- fi
- ;;
- pw32*)
- _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
- ;;
- cygwin* | mingw*)
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* $[[^ ]]*$/\1 DATA/;/^.* __nm__/s/^.* __nm__$[[^ ]]*$ [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
- ;;
- kfreebsd*-gnu)
- _LT_AC_TAGVAR(link_all_deplibs, $1)=no
- ;;
- linux*)
- _LT_AC_TAGVAR(link_all_deplibs, $1)=no
- ;;
- *)
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- ;;
- esac
-],[
- runpath_var=
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
- _LT_AC_TAGVAR(archive_cmds, $1)=
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
- _LT_AC_TAGVAR(hardcode_automatic, $1)=no
- _LT_AC_TAGVAR(module_cmds, $1)=
- _LT_AC_TAGVAR(module_expsym_cmds, $1)=
- _LT_AC_TAGVAR(always_export_symbols, $1)=no
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- # include_expsyms should be a list of space-separated symbols to be *always*
- # included in the symbol list
- _LT_AC_TAGVAR(include_expsyms, $1)=
- # exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
- _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
- # platforms (ab)use it in PIC code, but their linkers get confused if
- # the symbol is explicitly referenced. Since portable code cannot
- # rely on this symbol name, it's probably fine to never include it in
- # preloaded symbol tables.
- extract_expsyms_cmds=
- # Just being paranoid about ensuring that cc_basename is set.
- _LT_CC_BASENAME([$compiler])
- case $host_os in
- cygwin* | mingw* | pw32*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
- openbsd*)
- with_gnu_ld=no
- ;;
- esac
-
- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
- if test "$with_gnu_ld" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
-
- # Set some defaults for GNU ld with shared library support. These
- # are reset later if shared libraries are not supported. Putting them
- # here allows them to be overridden if necessary.
- runpath_var=LD_RUN_PATH
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- 	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- supports_anon_versioning=no
- case `$LD -v 2>/dev/null` in
- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
-
- # See if GNU ld supports shared libraries.
- case $host_os in
- aix3* | aix4* | aix5*)
- # On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
- fi
- ;;
-
- amigaos*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-
- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can't use
- # them.
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined. This deserves some investigation. FIXME
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
- # as there is no search path for DLLs.
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(always_export_symbols, $1)=no
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* $[[^ ]]*$/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	 cp $export_symbols $output_objdir/$soname.def;
-	else
-	 echo EXPORTS > $output_objdir/$soname.def;
-	 cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- interix3*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
-
- linux*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	tmp_addflag=
-	case $cc_basename,$host_cpu in
-	pgcc*)				# Portland Group C compiler
-	 _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	 tmp_addflag=' $pic_flag'
-	 ;;
-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	 _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	 tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
-	 tmp_addflag=' -i_dynamic' ;;
-	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-	 tmp_addflag=' -i_dynamic -nofor_main' ;;
-	ifc* | ifort*)			# Intel Fortran compiler
-	 tmp_addflag=' -nofor_main' ;;
-	esac
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
-	if test $supports_anon_versioning = yes; then
-	 _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~
- $echo "local: *; };" >> $output_objdir/$libname.ver~
-	 $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	fi
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=no
- else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
- else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
-
- solaris*)
- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) 
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
-	;;
-	*)
-	 if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-	 _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-	 else
-	 _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	 fi
-	;;
- esac
- ;;
-
- sunos4*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
-
- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
- runpath_var=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	_LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
- fi
- ;;
-
- aix4* | aix5*)
- if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
- else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-	 _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-	else
-	 _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-	fi
-	aix_use_runtimelinking=no
-
-	# Test if we are trying to use run time linking or normal
-	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
-	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-	 for ld_flag in $LDFLAGS; do
- 	 if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- 	 aix_use_runtimelinking=yes
- 	 break
- 	 fi
-	 done
-	 ;;
-	esac
-
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- _LT_AC_TAGVAR(archive_cmds, $1)=''
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
- if test "$GCC" = yes; then
-	case $host_os in aix4.[[012]]|aix4.[[012]].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	 collect2name=`${CC} -print-prog-name=collect2`
-	 if test -f "$collect2name" && \
- 	 strings "$collect2name" | grep resolve_lib_name >/dev/null
-	 then
- 	 # We have reworked collect2
- 	 _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	 else
- 	 # We have old collect2
- 	 _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
- 	 # It fails to find uninstalled libraries when the uninstalled
- 	 # path is not listed in the libpath. Setting hardcode_minus_L
- 	 # to unsupported forces relinking
- 	 _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- 	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- 	 _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-	 fi
-	 ;;
-	esac
-	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	 shared_flag="$shared_flag "'${wl}-G'
-	fi
- else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
- 	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- 	# chokes on -Wl,-G. The following line is correct:
-	 shared_flag='-G'
-	else
-	 if test "$aix_use_runtimelinking" = yes; then
-	 shared_flag='${wl}-G'
-	 else
-	 shared_flag='${wl}-bM:SRE'
-	 fi
-	fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
-	if test "$host_cpu" = ia64; then
-	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	 _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	 _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 _LT_AC_SYS_LIBPATH_AIX
-	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	 # Warning - without using the other run time loading flags,
-	 # -berok will link without error, but may produce a broken library.
-	 _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	 _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	 # Exported symbols can be pulled into shared objects from archives
-	 _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	 _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-	 # This is similar to how AIX traditionally builds its shared libraries.
-	 _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
- fi
- ;;
-
- amigaos*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- # see comment about different semantics on the GNU ld section
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- bsdi[[45]]*)
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
- ;;
-
- cygwin* | mingw* | pw32*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
- # FIXME: Should let the user specify the lib program.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
- _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- ;;
-
- darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- if test "$GCC" = yes ; then
- 	output_verbose_link_cmd='echo'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- fi
- ;;
-
- dgux*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- freebsd1*)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
- 
- # GNU/kFreeBSD uses gcc -shared to do shared libraries.
- kfreebsd*-gnu)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(link_all_deplibs, $1)=no
- ;;
-
- hpux9*)
- if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- ;;
-
- hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
- if test "$with_gnu_ld" = no; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	_LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-
-	# hardcode_minus_L: Not really in the search PATH,
-	# but as the default location of the library.
-	_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- fi
- ;;
-
- hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case $host_cpu in
-	hppa*64*)
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	 ;;
-	ia64*)
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	 ;;
-	*)
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	 ;;
-	esac
- else
-	case $host_cpu in
-	hppa*64*)
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	 ;;
-	ia64*)
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	 ;;
-	*)
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	 ;;
-	esac
- fi
- if test "$with_gnu_ld" = no; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	case $host_cpu in
-	hppa*64*|ia64*)
-	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-	 _LT_AC_TAGVAR(hardcode_direct, $1)=no
-	 _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	 ;;
-	*)
-	 _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	 _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-
-	 # hardcode_minus_L: Not really in the search PATH,
-	 # but as the default location of the library.
-	 _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-	 ;;
-	esac
- fi
- ;;
-
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- ;;
-
- netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- newsos6)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- openbsd*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- else
- case $host_os in
-	 openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	 ;;
-	 *)
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	 ;;
- esac
- fi
- ;;
-
- os2*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
-
- osf3*)
- if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
-
- osf4* | osf5*)	# as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- else
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
-	# Both c and cxx compiler support -rpath directly
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
-
- solaris*)
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
- if test "$GCC" = yes; then
-	wlarc='${wl}'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	 $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
- else
-	wlarc=''
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- 	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- case $host_os in
- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *)
- 	# The compiler driver will combine linker options so we
- 	# cannot just pass the convience library names through
- 	# without $wl, iff we do not link with $LD.
- 	# Luckily, gcc supports the same syntax we need for Sun Studio.
- 	# Supported since Solaris 2.6 (maybe 2.5.1?)
- 	case $wlarc in
- 	'')
- 	 _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
- 	*)
- 	 _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
- 	esac ;;
- esac
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- ;;
-
- sunos4*)
- if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
- else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- sysv4)
- case $host_vendor in
-	sni)
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	 _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-	;;
-	siemens)
-	 ## LD is ld it makes a PLAMLIB
-	 ## CC just makes a GrossModule.
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	 _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-	 _LT_AC_TAGVAR(hardcode_direct, $1)=no
- ;;
-	motorola)
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	 _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-	;;
- esac
- runpath_var='LD_RUN_PATH'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- sysv4.3*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	_LT_AC_TAGVAR(ld_shlibs, $1)=yes
- fi
- ;;
-
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7*)
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- uts4*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- *)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- fi
-])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
-x|xyes)
- # Assume -lc should be added
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-
- if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $_LT_AC_TAGVAR(archive_cmds, $1) in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
- $rm conftest*
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-	pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
- if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
- then
-	 _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- else
-	 _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
- fi
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $rm conftest*
- AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
- ;;
- esac
- fi
- ;;
-esac
-])# AC_LIBTOOL_PROG_LD_SHLIBS
-
-
-# _LT_AC_FILE_LTDLL_C
-# -------------------
-# Be careful that the start marker always follows a newline.
-AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# # ifdef __CYGWIN32__
-# # define __CYGWIN__ __CYGWIN32__
-# # endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-# __hDllInstance_base = hInst;
-# return TRUE;
-# }
-# /* ltdll.c ends here */
-])# _LT_AC_FILE_LTDLL_C
-
-
-# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
-# ---------------------------------
-AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
-
-
-# old names
-AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
-
-# This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
- AC_SUBST(GCJFLAGS)
-])
-
-AC_DEFUN([LT_AC_PROG_RC],
-[AC_CHECK_TOOL(RC, windres, no)
-])
-
-# NOTE: This macro has been submitted for inclusion into #
-# GNU Autoconf as AC_PROG_SED. When it is available in #
-# a released version of Autoconf we should remove this #
-# macro and use it instead. #
-# LT_AC_PROG_SED
-# --------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible. Prefer GNU sed if found.
-AC_DEFUN([LT_AC_PROG_SED],
-[AC_MSG_CHECKING([for a sed that does not truncate output])
-AC_CACHE_VAL(lt_cv_path_SED,
-[# Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for lt_ac_prog in sed gsed; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
- fi
- done
- done
-done
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
- test ! -f $lt_ac_sed && continue
- cat /dev/null > conftest.in
- lt_ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
- # Check for GNU sed and select it if it is found.
- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
- lt_cv_path_SED=$lt_ac_sed
- break
- fi
- while true; do
- cat conftest.in conftest.in >conftest.tmp
- mv conftest.tmp conftest.in
- cp conftest.in conftest.nl
- echo >>conftest.nl
- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
- cmp -s conftest.out conftest.nl || break
- # 10000 chars as input seems more than enough
- test $lt_ac_count -gt 10 && break
- lt_ac_count=`expr $lt_ac_count + 1`
- if test $lt_ac_count -gt $lt_ac_max; then
- lt_ac_max=$lt_ac_count
- lt_cv_path_SED=$lt_ac_sed
- fi
- done
-done
-])
-SED=$lt_cv_path_SED
-AC_MSG_RESULT([$SED])
-])
-
Index: admin/programs.txt
===================================================================
--- admin/programs.txt.orig
+++ admin/programs.txt
@@ -56,8 +56,8 @@ g_rms|calculates rmsd's with a reference
 g_confrms|fits two structures and calculates the rmsd 
 g_cluster|clusters structures
 g_rmsf|calculates atomic fluctuations
-disco|distance geometry calculation with the CONCOORD algorithm
-cdist|create input for disco
+g_disco|distance geometry calculation with the CONCOORD algorithm
+cdist|create input for g_disco
 END
 
 HEAD|Distances in structures over time
@@ -93,8 +93,8 @@ g_sorient|analyzes solvent orientation a
 g_bundle|analyzes bundles of axes, e.g. helices
 g_disre|analyzes distance restraints
 g_clustsize|calculate size distributions of atomic clusters
-disco|distance geometry calculation with the CONCOORD algorithm
-cdist|create input for disco
+g_disco|distance geometry calculation with the CONCOORD algorithm
+cdist|create input for g_disco
 anadock|cluster structures from Autodock runs
 END
 
Index: configure.ac
===================================================================
--- configure.ac.orig
+++ configure.ac
@@ -314,6 +314,7 @@ fi
 
 
 AC_PROG_CPP
+AM_PROG_AS
 
 if test "$enable_cpu_optimization" = "yes"; then
 ACX_DETECT_GMXCPU
@@ -840,7 +841,7 @@ fi
 
 # we have asm source, so this is necessary for automake 1.6
 CCAS=$CC
-CCASFLAGS=$CFLAGS
+CCASFLAGS=$CFLAGS -Wa,--noexecstack
 
 AC_SUBST(CCAS)
 AC_SUBST(CCASFLAGS)
Index: include/Makefile.am
===================================================================
--- include/Makefile.am.orig
+++ include/Makefile.am
@@ -99,7 +99,6 @@ symtab.h \
 sysstuff.h \
 tags.h \
 tgroup.h \
-tgroup.h \
 tpxio.h \
 transfer.h \
 trnio.h \
Index: Makefile.am
===================================================================
--- Makefile.am.orig
+++ Makefile.am
@@ -17,7 +17,7 @@ SUBDIRS = include src admin scripts shar
 
 EXTRA_DIST = config/depcomp 	 
 
-install-hook:
+install-exec-hook:
 	@echo ""
 	@echo "GROMACS is installed under $(prefix)."
 	@echo "Make sure to update your PATH and MANPATH to find the"
Index: man/man1/cdist.1
===================================================================
--- man/man1/cdist.1.orig
+++ man/man1/cdist.1
@@ -38,7 +38,7 @@ cdist
 .SH DESCRIPTION
 cdist read a 
 .B tpx
-file and dumps an input file for disco.
+file and dumps an input file for g_disco.
 Bond lengths etc. are read from the topology. Pairs of atoms that can
 form hydrogen bonds are given a lowest possible distance of
 
@@ -62,7 +62,7 @@ of
 to generate a topology with all dihedrals in there.
 If the optional pdb file is given, weights are read from the occupancy
 field, so that
-not all atoms are part of the disco run, only those of which one of the
+not all atoms are part of the g_disco run, only those of which one of the
 weights is non-zero.
 
 
@@ -75,7 +75,7 @@ directory.
 
 The program can read a file with distances from NMR distance restraints
 (-d option). Note that these distance are treated slightly different
-in the disco program, and therefore these distance should be NMR
+in the g_disco program, and therefore these distance should be NMR
 derived distance restraints only.
 
 
@@ -192,7 +192,7 @@ with each other.
 Maximum distance between any pair of atoms
 
 .BI "-[no]add" " no"
- Write restraints in format of additional restraints for disco
+ Write restraints in format of additional restraints for g_disco
 
 .BI "-[no]vir" " no"
 Use virtual particles
Index: man/man1/disco.1
===================================================================
--- man/man1/disco.1.orig
+++ man/man1/disco.1
@@ -1,9 +1,9 @@
-.TH disco 1 "Mon 29 Aug 2005"
+.TH g_disco 1 "Mon 29 Aug 2005"
 .SH NAME
-disco
+g_disco
 .B VERSION 3.3_beta_20050823
 .SH SYNOPSIS
-\f3disco\fP
+\f3g_disco\fP
 .BI "-g" " disco.log "
 .BI "-f" " conf.gro "
 .BI "-d" " cdist.dat "
@@ -36,17 +36,19 @@ disco
 .BI "-box" " vector "
 .BI "-grow" " int "
 .SH DESCRIPTION
-disco reads a topology (tpr) file and runs distance geometry
+g_disco reads a topology (tpr) file and runs distance geometry
 calculations based on the distances defined in the
 distance-restraints section of the topology. An appropriate tpr
 file may be generated by the cdist program.
 
+In the original gromacs distribution, this file was named disco
+but it conflicts with a file from the mono package.
 
 The algorithm is the CONCOORD algorithm of De Groot et al.,
 which in turn is derived from the SHAKE alogrithm.
 
 
-A parallel version of disco is under development whihc uses a
+A parallel version of g_disco is under development which uses a
 master-slave approach. Slaves work asynchronously, and it is no
 problem when nodes are not equally fast, or when a node dies,
 unless it is the master node.
Index: scripts/completion.bash
===================================================================
--- scripts/completion.bash.orig
+++ scripts/completion.bash
@@ -44,7 +44,7 @@ case "$p" in
 -keep) COMPREPLY=( $(compgen -X '!*.+(xtc|trr|trj|gro|g96|pdb|g87)*(.gz|.Z)' -f $c ; compgen -S '/' -X '.*' -d $c ));;
 -viol) COMPREPLY=( $(compgen -X '!*.pdb*(.gz|.Z)' -f $c ; compgen -S '/' -X '.*' -d $c ));;
 esac }
-complete -F _disco_compl disco
+complete -F _disco_compl g_disco
 shopt -s extglob
 _do_dssp_compl() {
 local p c
Index: scripts/completion.csh
===================================================================
--- scripts/completion.csh.orig
+++ scripts/completion.csh
@@ -1,6 +1,6 @@
 complete anadock "n/-f/f:*.pdb{,.gz,.Z}/" "n/-ox/f:*.pdb{,.gz,.Z}/" "n/-od/f:*.xvg{,.gz,.Z}/" "n/-of/f:*.xvg{,.gz,.Z}/" "n/-g/f:*.log{,.gz,.Z}/" "c/-/( f ox od of g h nice noxvgr free norms cutoff)/"
 complete cdist "n/-sm/( none tri tetra)/" "n/-s/f:*.{tpr,tpb,tpa,gro,g96,pdb,brk,ent}{,.gz,.Z}/" "n/-g/f:*.log{,.gz,.Z}/" "n/-q/f:*.pdb{,.gz,.Z}/" "n/-d/f:*.dat{,.gz,.Z}/" "n/-o/f:*.dat{,.gz,.Z}/" "n/-n/f:*.ndx{,.gz,.Z}/" "n/-dom/f:*.ndx{,.gz,.Z}/" "c/-/( s g q d o n dom h nice noengh bm am pm rr ar er vm lm il dm im nm hm hb nobon nonb measure maxdist add vir sm)/"
-complete disco "n/-g/f:*.log{,.gz,.Z}/" "n/-f/f:*.{gro,g96,pdb,brk,ent,esp,tpr,tpb,tpa}{,.gz,.Z}/" "n/-d/f:*.dat{,.gz,.Z}/" "n/-do/f:*.dat{,.gz,.Z}/" "n/-c/f:*.{gro,g96,pdb,brk,ent,esp}{,.gz,.Z}/" "n/-center/f:*.{gro,g96,pdb,brk,ent,esp}{,.gz,.Z}/" "n/-n/f:*.ndx{,.gz,.Z}/" "n/-o/f:*.{xtc,trr,trj,gro,g96,pdb,g87}{,.gz,.Z}/" "n/-keep/f:*.{xtc,trr,trj,gro,g96,pdb,g87}{,.gz,.Z}/" "n/-viol/f:*.pdb{,.gz,.Z}/" "c/-/( g f d do c center n o keep viol h nice nf nit nov nochiral nopep lower weighted dump cubic explicit fit nbcheck nstprint ranlist noranlistfirst lowdev seed box grow)/"
+complete g_disco "n/-g/f:*.log{,.gz,.Z}/" "n/-f/f:*.{gro,g96,pdb,brk,ent,esp,tpr,tpb,tpa}{,.gz,.Z}/" "n/-d/f:*.dat{,.gz,.Z}/" "n/-do/f:*.dat{,.gz,.Z}/" "n/-c/f:*.{gro,g96,pdb,brk,ent,esp}{,.gz,.Z}/" "n/-center/f:*.{gro,g96,pdb,brk,ent,esp}{,.gz,.Z}/" "n/-n/f:*.ndx{,.gz,.Z}/" "n/-o/f:*.{xtc,trr,trj,gro,g96,pdb,g87}{,.gz,.Z}/" "n/-keep/f:*.{xtc,trr,trj,gro,g96,pdb,g87}{,.gz,.Z}/" "n/-viol/f:*.pdb{,.gz,.Z}/" "c/-/( g f d do c center n o keep viol h nice nf nit nov nochiral nopep lower weighted dump cubic explicit fit nbcheck nstprint ranlist noranlistfirst lowdev seed box grow)/"
 complete do_dssp "n/-tu/( ps fs ns us ms s m h)/" "n/-f/f:*.{xtc,trr,trj,gro,g96,pdb,g87}{,.gz,.Z}/" "n/-s/f:*.{tpr,tpb,tpa,gro,g96,pdb,brk,ent}{,.gz,.Z}/" "n/-n/f:*.ndx{,.gz,.Z}/" "n/-ssdump/f:*.dat{,.gz,.Z}/" "n/-map/f:*.map{,.gz,.Z}/" "n/-o/f:*.xpm{,.gz,.Z}/" "n/-sc/f:*.xvg{,.gz,.Z}/" "n/-a/f:*.xpm{,.gz,.Z}/" "n/-ta/f:*.xvg{,.gz,.Z}/" "n/-aa/f:*.xvg{,.gz,.Z}/" "c/-/( f s n ssdump map o sc a ta aa h nice b e dt tu w noxvgr sss)/"
 complete editconf "n/-bt/( tric cubic dodecahedron octahedron)/" "n/-f/f:*.{gro,g96,pdb,brk,ent,esp,tpr,tpb,tpa}{,.gz,.Z}/" "n/-n/f:*.ndx{,.gz,.Z}/" "n/-o/f:*.{gro,g96,pdb,brk,ent,esp}{,.gz,.Z}/" "n/-mead/f:*.pqr{,.gz,.Z}/" "n/-bf/f:*.dat{,.gz,.Z}/" "c/-/( f n o mead bf h nice w ndef bt box angles d c center translate rotate princ scale density novol pbc grasp rvdw sig56 vdwread atom legend label)/"
 complete eneconv "n/-f/f:*.{edr,ene}{,.gz,.Z}/" "n/-o/f:*.{edr,ene}{,.gz,.Z}/" "c/-/( f o h nice b e dt offset settime nosort scalefac noerror)/"
Index: scripts/completion.zsh
===================================================================
--- scripts/completion.zsh.orig
+++ scripts/completion.zsh
@@ -1,6 +1,6 @@
 compctl -x 's[-]' -s " f ox od of g h nice noxvgr free norms cutoff" - 'c[-1,-f]' -g '*.pdb(|.gz|.Z) *(/)' - 'c[-1,-ox]' -g '*.pdb(|.gz|.Z) *(/)' - 'c[-1,-od]' -g '*.xvg(|.gz|.Z) *(/)' - 'c[-1,-of]' -g '*.xvg(|.gz|.Z) *(/)' - 'c[-1,-g]' -g '*.log(|.gz|.Z) *(/)' -- anadock
 compctl -x 's[-]' -s " s g q d o n dom h nice noengh bm am pm rr ar er vm lm il dm im nm hm hb nobon nonb measure maxdist add vir sm" - 'c[-1,-sm]' -s " none tri tetra" - 'c[-1,-s]' -g '*.(tpr|tpb|tpa|gro|g96|pdb|brk|ent)(|.gz|.Z) *(/)' - 'c[-1,-g]' -g '*.log(|.gz|.Z) *(/)' - 'c[-1,-q]' -g '*.pdb(|.gz|.Z) *(/)' - 'c[-1,-d]' -g '*.dat(|.gz|.Z) *(/)' - 'c[-1,-o]' -g '*.dat(|.gz|.Z) *(/)' - 'c[-1,-n]' -g '*.ndx(|.gz|.Z) *(/)' - 'c[-1,-dom]' -g '*.ndx(|.gz|.Z) *(/)' -- cdist
-compctl -x 's[-]' -s " g f d do c center n o keep viol h nice nf nit nov nochiral nopep lower weighted dump cubic explicit fit nbcheck nstprint ranlist noranlistfirst lowdev seed box grow" - 'c[-1,-g]' -g '*.log(|.gz|.Z) *(/)' - 'c[-1,-f]' -g '*.(gro|g96|pdb|brk|ent|esp|tpr|tpb|tpa)(|.gz|.Z) *(/)' - 'c[-1,-d]' -g '*.dat(|.gz|.Z) *(/)' - 'c[-1,-do]' -g '*.dat(|.gz|.Z) *(/)' - 'c[-1,-c]' -g '*.(gro|g96|pdb|brk|ent|esp)(|.gz|.Z) *(/)' - 'c[-1,-center]' -g '*.(gro|g96|pdb|brk|ent|esp)(|.gz|.Z) *(/)' - 'c[-1,-n]' -g '*.ndx(|.gz|.Z) *(/)' - 'c[-1,-o]' -g '*.(xtc|trr|trj|gro|g96|pdb|g87)(|.gz|.Z) *(/)' - 'c[-1,-keep]' -g '*.(xtc|trr|trj|gro|g96|pdb|g87)(|.gz|.Z) *(/)' - 'c[-1,-viol]' -g '*.pdb(|.gz|.Z) *(/)' -- disco
+compctl -x 's[-]' -s " g f d do c center n o keep viol h nice nf nit nov nochiral nopep lower weighted dump cubic explicit fit nbcheck nstprint ranlist noranlistfirst lowdev seed box grow" - 'c[-1,-g]' -g '*.log(|.gz|.Z) *(/)' - 'c[-1,-f]' -g '*.(gro|g96|pdb|brk|ent|esp|tpr|tpb|tpa)(|.gz|.Z) *(/)' - 'c[-1,-d]' -g '*.dat(|.gz|.Z) *(/)' - 'c[-1,-do]' -g '*.dat(|.gz|.Z) *(/)' - 'c[-1,-c]' -g '*.(gro|g96|pdb|brk|ent|esp)(|.gz|.Z) *(/)' - 'c[-1,-center]' -g '*.(gro|g96|pdb|brk|ent|esp)(|.gz|.Z) *(/)' - 'c[-1,-n]' -g '*.ndx(|.gz|.Z) *(/)' - 'c[-1,-o]' -g '*.(xtc|trr|trj|gro|g96|pdb|g87)(|.gz|.Z) *(/)' - 'c[-1,-keep]' -g '*.(xtc|trr|trj|gro|g96|pdb|g87)(|.gz|.Z) *(/)' - 'c[-1,-viol]' -g '*.pdb(|.gz|.Z) *(/)' -- g_disco
 compctl -x 's[-]' -s " f s n ssdump map o sc a ta aa h nice b e dt tu w noxvgr sss" - 'c[-1,-tu]' -s " ps fs ns us ms s m h" - 'c[-1,-f]' -g '*.(xtc|trr|trj|gro|g96|pdb|g87)(|.gz|.Z) *(/)' - 'c[-1,-s]' -g '*.(tpr|tpb|tpa|gro|g96|pdb|brk|ent)(|.gz|.Z) *(/)' - 'c[-1,-n]' -g '*.ndx(|.gz|.Z) *(/)' - 'c[-1,-ssdump]' -g '*.dat(|.gz|.Z) *(/)' - 'c[-1,-map]' -g '*.map(|.gz|.Z) *(/)' - 'c[-1,-o]' -g '*.xpm(|.gz|.Z) *(/)' - 'c[-1,-sc]' -g '*.xvg(|.gz|.Z) *(/)' - 'c[-1,-a]' -g '*.xpm(|.gz|.Z) *(/)' - 'c[-1,-ta]' -g '*.xvg(|.gz|.Z) *(/)' - 'c[-1,-aa]' -g '*.xvg(|.gz|.Z) *(/)' -- do_dssp
 compctl -x 's[-]' -s " f n o mead bf h nice w ndef bt box angles d c center translate rotate princ scale density novol pbc grasp rvdw sig56 vdwread atom legend label" - 'c[-1,-bt]' -s " tric cubic dodecahedron octahedron" - 'c[-1,-f]' -g '*.(gro|g96|pdb|brk|ent|esp|tpr|tpb|tpa)(|.gz|.Z) *(/)' - 'c[-1,-n]' -g '*.ndx(|.gz|.Z) *(/)' - 'c[-1,-o]' -g '*.(gro|g96|pdb|brk|ent|esp)(|.gz|.Z) *(/)' - 'c[-1,-mead]' -g '*.pqr(|.gz|.Z) *(/)' - 'c[-1,-bf]' -g '*.dat(|.gz|.Z) *(/)' -- editconf
 compctl -x 's[-]' -s " f o h nice b e dt offset settime nosort scalefac noerror" - 'c[-1,-f]' -g '*.(edr|ene)(|.gz|.Z) *(/)' - 'c[-1,-o]' -g '*.(edr|ene)(|.gz|.Z) *(/)' -- eneconv
Index: share/html/online.html
===================================================================
--- share/html/online.html.orig
+++ share/html/online.html
@@ -48,7 +48,7 @@ Sun 28 Aug 2005</td>
 
 <a href=online/anadock.html>anadock</a>
 <a href=online/cdist.html>cdist</a>
- <a href=online/disco.html>disco</a>
+ <a href=online/disco.html>g_disco</a>
 <a href=online/do_dssp.html>do_dssp</a>
 <a href=online/editconf.html>editconf</a>
 <a href=online/eneconv.html>eneconv</a>
@@ -231,8 +231,8 @@ Sun 28 Aug 2005</td>
 <TR><TD><A HREF="online/g_confrms.html">g_confrms</A></TD><TD>fits two structures and calculates the rmsd </TD>
 <TR><TD><A HREF="online/g_cluster.html">g_cluster</A></TD><TD>clusters structures</TD>
 <TR><TD><A HREF="online/g_rmsf.html">g_rmsf</A></TD><TD>calculates atomic fluctuations</TD>
-<TR><TD><A HREF="online/disco.html">disco</A></TD><TD>distance geometry calculation with the CONCOORD algorithm</TD>
-<TR><TD><A HREF="online/cdist.html">cdist</A></TD><TD>create input for disco</TD>
+<TR><TD><A HREF="online/disco.html">g_disco</A></TD><TD>distance geometry calculation with the CONCOORD algorithm</TD>
+<TR><TD><A HREF="online/cdist.html">cdist</A></TD><TD>create input for g_disco</TD>
 </TABLE>
 
 <A NAME="HNR8">
@@ -280,8 +280,8 @@ Sun 28 Aug 2005</td>
 <TR><TD><A HREF="online/g_bundle.html">g_bundle</A></TD><TD>analyzes bundles of axes, e.g. helices</TD>
 <TR><TD><A HREF="online/g_disre.html">g_disre</A></TD><TD>analyzes distance restraints</TD>
 <TR><TD><A HREF="online/g_clustsize.html">g_clustsize</A></TD><TD>calculate size distributions of atomic clusters</TD>
-<TR><TD><A HREF="online/disco.html">disco</A></TD><TD>distance geometry calculation with the CONCOORD algorithm</TD>
-<TR><TD><A HREF="online/cdist.html">cdist</A></TD><TD>create input for disco</TD>
+<TR><TD><A HREF="online/disco.html">g_disco</A></TD><TD>distance geometry calculation with the CONCOORD algorithm</TD>
+<TR><TD><A HREF="online/cdist.html">cdist</A></TD><TD>create input for g_disco</TD>
 <TR><TD><A HREF="online/anadock.html">anadock</A></TD><TD>cluster structures from Autodock runs</TD>
 </TABLE>
 
Index: share/top/Makefile.am
===================================================================
--- share/top/Makefile.am.orig
+++ share/top/Makefile.am
@@ -50,7 +50,7 @@ topol_DATA = \
 	export.dlg	bonds.dlg	ss.map		ps.m2p		\
 	table6-10.xvg 	table6-11.xvg 	table6-12.xvg 	table6-8.xvg 	\
 	table6-9.xvg 	atom_nom.tbl	gromacs.dtd	tip5p.gro	\
-	tip5p.itp	sw.itp
+	tip5p.itp	sw.itp	FF.dat
 
 EXTRA_DIST = ${topol_DATA}
 
Index: src/gmxlib/nonbonded/nb_kernel/Makefile.am
===================================================================
--- src/gmxlib/nonbonded/nb_kernel/Makefile.am.orig
+++ src/gmxlib/nonbonded/nb_kernel/Makefile.am
@@ -148,7 +148,7 @@ EXTRA_DIST = \
 
 
 
-BUILD_COMPILE = $(CC_FOR_BUILD) $(DEFS) $(DEFAULT_INCLUDES)
+BUILD_COMPILE = $(CC_FOR_BUILD) $(DEFS) $(DEFAULT_INCLUDES) $(CCFLAGS)
 
 
 
Index: src/gmxlib/nonbonded/nb_kernel/Makefile.am~
===================================================================
--- /dev/null
+++ src/gmxlib/nonbonded/nb_kernel/Makefile.am~
@@ -0,0 +1,214 @@
+
+AM_CPPFLAGS= -I$(top_srcdir)/include -DGMXLIBDIR=\"$(datadir)/top\"
+
+noinst_LTLIBRARIES = libnb_kernel.la
+
+
+FORTRAN_KERNEL_OBJS = \
+	nb_kernel010_f.lo nb_kernel020_f.lo nb_kernel030_f.lo nb_kernel100_f.lo \
+	nb_kernel101_f.lo nb_kernel102_f.lo nb_kernel103_f.lo nb_kernel104_f.lo \
+	nb_kernel110_f.lo nb_kernel111_f.lo nb_kernel112_f.lo nb_kernel113_f.lo \
+	nb_kernel114_f.lo nb_kernel120_f.lo nb_kernel121_f.lo nb_kernel122_f.lo \
+	nb_kernel123_f.lo nb_kernel124_f.lo nb_kernel130_f.lo nb_kernel131_f.lo \
+	nb_kernel132_f.lo nb_kernel133_f.lo nb_kernel134_f.lo nb_kernel200_f.lo \
+	nb_kernel201_f.lo nb_kernel202_f.lo nb_kernel203_f.lo nb_kernel204_f.lo \
+	nb_kernel210_f.lo nb_kernel211_f.lo nb_kernel212_f.lo nb_kernel213_f.lo \
+	nb_kernel214_f.lo nb_kernel220_f.lo nb_kernel221_f.lo nb_kernel222_f.lo \
+	nb_kernel223_f.lo nb_kernel224_f.lo nb_kernel230_f.lo nb_kernel231_f.lo \
+	nb_kernel232_f.lo nb_kernel233_f.lo nb_kernel234_f.lo nb_kernel300_f.lo \
+	nb_kernel301_f.lo nb_kernel302_f.lo nb_kernel303_f.lo nb_kernel304_f.lo \
+	nb_kernel310_f.lo nb_kernel311_f.lo nb_kernel312_f.lo nb_kernel313_f.lo \
+	nb_kernel314_f.lo nb_kernel320_f.lo nb_kernel321_f.lo nb_kernel322_f.lo \
+	nb_kernel323_f.lo nb_kernel324_f.lo nb_kernel330_f.lo nb_kernel331_f.lo \
+	nb_kernel332_f.lo nb_kernel333_f.lo nb_kernel334_f.lo nb_kernel400_f.lo \
+	nb_kernel410_f.lo nb_kernel420_f.lo nb_kernel430_f.lo 
+
+FORTRAN_KERNEL_SOURCES = \
+	nb_kernel010_f.f nb_kernel020_f.f nb_kernel030_f.f nb_kernel100_f.f \
+	nb_kernel101_f.f nb_kernel102_f.f nb_kernel103_f.f nb_kernel104_f.f \
+	nb_kernel110_f.f nb_kernel111_f.f nb_kernel112_f.f nb_kernel113_f.f \
+	nb_kernel114_f.f nb_kernel120_f.f nb_kernel121_f.f nb_kernel122_f.f \
+	nb_kernel123_f.f nb_kernel124_f.f nb_kernel130_f.f nb_kernel131_f.f \
+	nb_kernel132_f.f nb_kernel133_f.f nb_kernel134_f.f nb_kernel200_f.f \
+	nb_kernel201_f.f nb_kernel202_f.f nb_kernel203_f.f nb_kernel204_f.f \
+	nb_kernel210_f.f nb_kernel211_f.f nb_kernel212_f.f nb_kernel213_f.f \
+	nb_kernel214_f.f nb_kernel220_f.f nb_kernel221_f.f nb_kernel222_f.f \
+	nb_kernel223_f.f nb_kernel224_f.f nb_kernel230_f.f nb_kernel231_f.f \
+	nb_kernel232_f.f nb_kernel233_f.f nb_kernel234_f.f nb_kernel300_f.f \
+	nb_kernel301_f.f nb_kernel302_f.f nb_kernel303_f.f nb_kernel304_f.f \
+	nb_kernel310_f.f nb_kernel311_f.f nb_kernel312_f.f nb_kernel313_f.f \
+	nb_kernel314_f.f nb_kernel320_f.f nb_kernel321_f.f nb_kernel322_f.f \
+	nb_kernel323_f.f nb_kernel324_f.f nb_kernel330_f.f nb_kernel331_f.f \
+	nb_kernel332_f.f nb_kernel333_f.f nb_kernel334_f.f nb_kernel400_f.f \
+	nb_kernel410_f.f nb_kernel420_f.f nb_kernel430_f.f
+
+
+#
+
+C_KERNEL_OBJS = \
+	nb_kernel010_c.lo nb_kernel020_c.lo nb_kernel030_c.lo nb_kernel100_c.lo \
+	nb_kernel101_c.lo nb_kernel102_c.lo nb_kernel103_c.lo nb_kernel104_c.lo \
+	nb_kernel110_c.lo nb_kernel111_c.lo nb_kernel112_c.lo nb_kernel113_c.lo \
+	nb_kernel114_c.lo nb_kernel120_c.lo nb_kernel121_c.lo nb_kernel122_c.lo \
+	nb_kernel123_c.lo nb_kernel124_c.lo nb_kernel130_c.lo nb_kernel131_c.lo \
+	nb_kernel132_c.lo nb_kernel133_c.lo nb_kernel134_c.lo nb_kernel200_c.lo \
+	nb_kernel201_c.lo nb_kernel202_c.lo nb_kernel203_c.lo nb_kernel204_c.lo \
+	nb_kernel210_c.lo nb_kernel211_c.lo nb_kernel212_c.lo nb_kernel213_c.lo \
+	nb_kernel214_c.lo nb_kernel220_c.lo nb_kernel221_c.lo nb_kernel222_c.lo \
+	nb_kernel223_c.lo nb_kernel224_c.lo nb_kernel230_c.lo nb_kernel231_c.lo \
+	nb_kernel232_c.lo nb_kernel233_c.lo nb_kernel234_c.lo nb_kernel300_c.lo \
+	nb_kernel301_c.lo nb_kernel302_c.lo nb_kernel303_c.lo nb_kernel304_c.lo \
+	nb_kernel310_c.lo nb_kernel311_c.lo nb_kernel312_c.lo nb_kernel313_c.lo \
+	nb_kernel314_c.lo nb_kernel320_c.lo nb_kernel321_c.lo nb_kernel322_c.lo \
+	nb_kernel323_c.lo nb_kernel324_c.lo nb_kernel330_c.lo nb_kernel331_c.lo \
+	nb_kernel332_c.lo nb_kernel333_c.lo nb_kernel334_c.lo nb_kernel400_c.lo \
+	nb_kernel410_c.lo nb_kernel420_c.lo nb_kernel430_c.lo
+
+
+C_KERNEL_SOURCES = \
+	nb_kernel010_c.c nb_kernel020_c.c nb_kernel030_c.c nb_kernel100_c.c \
+	nb_kernel101_c.c nb_kernel102_c.c nb_kernel103_c.c nb_kernel104_c.c \
+	nb_kernel110_c.c nb_kernel111_c.c nb_kernel112_c.c nb_kernel113_c.c \
+	nb_kernel114_c.c nb_kernel120_c.c nb_kernel121_c.c nb_kernel122_c.c \
+	nb_kernel123_c.c nb_kernel124_c.c nb_kernel130_c.c nb_kernel131_c.c \
+	nb_kernel132_c.c nb_kernel133_c.c nb_kernel134_c.c nb_kernel200_c.c \
+	nb_kernel201_c.c nb_kernel202_c.c nb_kernel203_c.c nb_kernel204_c.c \
+	nb_kernel210_c.c nb_kernel211_c.c nb_kernel212_c.c nb_kernel213_c.c \
+	nb_kernel214_c.c nb_kernel220_c.c nb_kernel221_c.c nb_kernel222_c.c \
+	nb_kernel223_c.c nb_kernel224_c.c nb_kernel230_c.c nb_kernel231_c.c \
+	nb_kernel232_c.c nb_kernel233_c.c nb_kernel234_c.c nb_kernel300_c.c \
+	nb_kernel301_c.c nb_kernel302_c.c nb_kernel303_c.c nb_kernel304_c.c \
+	nb_kernel310_c.c nb_kernel311_c.c nb_kernel312_c.c nb_kernel313_c.c \
+	nb_kernel314_c.c nb_kernel320_c.c nb_kernel321_c.c nb_kernel322_c.c \
+	nb_kernel323_c.c nb_kernel324_c.c nb_kernel330_c.c nb_kernel331_c.c \
+	nb_kernel332_c.c nb_kernel333_c.c nb_kernel334_c.c nb_kernel400_c.c \
+	nb_kernel410_c.c nb_kernel420_c.c nb_kernel430_c.c
+
+
+
+if GMX_FORTRAN
+ KERNEL_OBJS = $(FORTRAN_KERNEL_OBJS) nb_kernel_f77sync.lo
+else
+ KERNEL_OBJS = $(C_KERNEL_OBJS)
+endif
+
+#
+# This is a virtual target for all the kernels, to ensure it is only run
+# by one CPU even if you run make in parallel.
+# The mknb program will generate the kernel-stamp file when done.
+#
+BUILT_SOURCES = kernel-stamp
+
+libnb_kernel_la_LIBADD = $(KERNEL_OBJS)
+libnb_kernel_la_DEPENDENCIES = $(KERNEL_OBJS)
+
+
+libnb_kernel_la_SOURCES = \
+	nb_kernel010.h nb_kernel020.h nb_kernel030.h nb_kernel100.h \
+	nb_kernel101.h nb_kernel102.h nb_kernel103.h nb_kernel104.h \
+	nb_kernel110.h nb_kernel111.h nb_kernel112.h nb_kernel113.h \
+	nb_kernel114.h nb_kernel120.h nb_kernel121.h nb_kernel122.h \
+	nb_kernel123.h nb_kernel124.h nb_kernel130.h nb_kernel131.h \
+	nb_kernel132.h nb_kernel133.h nb_kernel134.h nb_kernel200.h \
+	nb_kernel201.h nb_kernel202.h nb_kernel203.h nb_kernel204.h \
+	nb_kernel210.h nb_kernel211.h nb_kernel212.h nb_kernel213.h \
+	nb_kernel214.h nb_kernel220.h nb_kernel221.h nb_kernel222.h \
+	nb_kernel223.h nb_kernel224.h nb_kernel230.h nb_kernel231.h \
+	nb_kernel232.h nb_kernel233.h nb_kernel234.h nb_kernel300.h \
+	nb_kernel301.h nb_kernel302.h nb_kernel303.h nb_kernel304.h \
+	nb_kernel310.h nb_kernel311.h nb_kernel312.h nb_kernel313.h \
+	nb_kernel314.h nb_kernel320.h nb_kernel321.h nb_kernel322.h \
+	nb_kernel323.h nb_kernel324.h nb_kernel330.h nb_kernel331.h \
+	nb_kernel332.h nb_kernel333.h nb_kernel334.h nb_kernel400.h \
+	nb_kernel410.h nb_kernel420.h nb_kernel430.h 		 \
+	nb_kernel.c nb_kernel.h					 
+
+
+
+EXTRA_libnb_kernel_la_SOURCES = nb_kernel_f77sync.c
+
+
+# sources built at compile time
+nodist_EXTRA_libnb_kernel_la_SOURCES = $(FORTRAN_KERNEL_SOURCES) $(C_KERNEL_SOURCES)
+
+
+
+# mknb is special - we cant use a noinst_PROGRAMS target, since it might have 
+# to be compiled with a non-MPI compiler whose files can be executed by make:
+
+EXTRA_DIST = \
+	mknb.c						\
+	mknb_metacode.c		mknb_metacode.h		\
+	mknb_common.c		mknb_common.h		\
+	mknb_declarations.c	mknb_declarations.h	\
+	mknb_outerloop.c	mknb_outerloop.h	\
+	mknb_innerloop.c	mknb_innerloop.h	\
+	mknb_interactions.c	mknb_interactions.h	
+
+
+
+
+BUILD_COMPILE = $(CC_FOR_BUILD) $(DEFS) $(DEFAULT_INCLUDES)
+
+
+
+mknb.o:			mknb.c
+			$(BUILD_COMPILE) -c -o $@ $<
+mknb_common.o:		mknb_common.c
+			$(BUILD_COMPILE) -c -o $@ $<
+mknb_metacode.o:	mknb_metacode.c
+			$(BUILD_COMPILE) -c -o $@ $<
+mknb_declarations.o:	mknb_declarations.c
+			$(BUILD_COMPILE) -c -o $@ $<
+mknb_outerloop.o:	mknb_outerloop.c
+			$(BUILD_COMPILE) -c -o $@ $<
+mknb_innerloop.o:	mknb_innerloop.c
+			$(BUILD_COMPILE) -c -o $@ $<
+mknb_interactions.o:	mknb_interactions.c
+			$(BUILD_COMPILE) -c -o $@ $<
+
+MKNB_OBJ = \
+	mknb.o mknb_metacode.o mknb_common.o mknb_declarations.o \
+	mknb_outerloop.o mknb_innerloop.o mknb_interactions.o
+
+mknb:			$(MKNB_OBJ)
+			$(BUILD_COMPILE) -o $@ $(MKNB_OBJ)
+
+
+if GMX_DOUBLE
+ DOUBLEFLAG = -double
+endif
+
+if GMX_THREAD
+ THREADFLAG = -threads
+endif
+
+if GMX_SOFTWARE_SQRT
+ SQRTFLAG = -software_invsqrt
+endif
+
+if GMX_PREFETCH_FORCES
+ PREFETCHFLAG = -prefetch_forces
+endif
+
+if GMX_FORTRAN
+ FORTRANFLAG = -fortran
+endif
+
+MKNB_FLAGS = $(DOUBLEFLAG) $(THREADFLAG) $(SQRTFLAG) \
+ $(PREFETCHFLAG) $(FORTRANFLAG)
+
+#
+# The kernels should only be built once, instead of once per
+# source file when using parallel builds (make -j N). To solve this
+# the mknb program writes out a stamp file after the kernels, which
+# we use as a dummy/virtual target.
+#
+kernel-stamp:	mknb
+		rm -f kernel-stamp
+		./mknb $(MKNB_FLAGS)
+
+
+
+CLEANFILES = *.la *~ \\\#* mknb nb_kernel*_f.f nb_kernel*_c.c cg kernel-stamp 
+
Index: src/mdlib/calcmu.c
===================================================================
--- src/mdlib/calcmu.c.orig
+++ src/mdlib/calcmu.c
@@ -82,7 +82,7 @@ bool read_mu(FILE *fp,rvec mu,real *vol)
 /* For backward compatibility */
 real mmm[4];
 
- if (fread(mmm,(size_t)(4*sizeof(mmm)),1,fp) != 1)
+ if (fread(mmm,(size_t)(4*sizeof(real)),1,fp) != 1)
 return FALSE;
 
 copy_rvec(mmm,mu);
Index: src/mdlib/calcmu.c~
===================================================================
--- /dev/null
+++ src/mdlib/calcmu.c~
@@ -0,0 +1,93 @@
+/*
+ * $Id: calcmu.c,v 1.11 2005/03/01 09:00:38 hess Exp $
+ * 
+ * This source code is part of
+ * 
+ * G R O M A C S
+ * 
+ * GROningen MAchine for Chemical Simulations
+ * 
+ * VERSION 3.2.0
+ * Written by David van der Spoel, Erik Lindahl, Berk Hess, and others.
+ * Copyright (c) 1991-2000, University of Groningen, The Netherlands.
+ * Copyright (c) 2001-2004, The GROMACS development team,
+ * check out http://www.gromacs.org for more information.
+
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * 
+ * If you want to redistribute modifications, please consider that
+ * scientific software is very special. Version control is crucial -
+ * bugs must be traceable. We will be happy to consider code for
+ * inclusion in the official distribution, but derived work must not
+ * be called official GROMACS. Details are found in the README & COPYING
+ * files - if they are missing, get the official version at www.gromacs.org.
+ * 
+ * To help us fund GROMACS development, we humbly ask that you cite
+ * the papers on the package - you can find them in the top README file.
+ * 
+ * For more info, check our website at http://www.gromacs.org
+ * 
+ * And Hey:
+ * GROwing Monsters And Cloning Shrimps
+ */
+/* This file is completely threadsafe - keep it that way! */
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <stdlib.h>
+#include "typedefs.h"
+#include "network.h"
+#include "vec.h"
+#include "fatal.h"
+#include "physics.h"
+#include "nsb.h"
+#include "main.h"
+
+void calc_mu(t_nsborder *nsb,rvec x[],real q[],real qB[],
+	 bool bFreeEnergy,
+	 rvec mu,rvec mu_B)
+{
+ int i,start,end,m;
+ /* temporary double prec. to maintain precision */
+ dvec tmpmu;
+ 
+ start = START(nsb);
+ end = start + HOMENR(nsb); 
+
+ clear_dvec(tmpmu);
+ for(i=start; (i<end); i++)
+ for(m=0; (m<DIM); m++)
+ tmpmu[m] += q[i]*x[i][m];
+ 
+ for(m=0; (m<DIM); m++)
+ mu[m] = tmpmu[m] * ENM2DEBYE;
+ 
+ if (bFreeEnergy) {
+ clear_dvec(tmpmu);
+ for(i=start; (i<end); i++)
+ for(m=0; (m<DIM); m++)
+	tmpmu[m] += qB[i]*x[i][m];
+ }
+ for(m=0; (m<DIM); m++)
+ mu_B[m] = tmpmu[m] * ENM2DEBYE;
+}
+
+bool read_mu(FILE *fp,rvec mu,real *vol)
+{
+ /* For backward compatibility */
+ real mmm[4];
+ 
+ if (fread(mmm,(size_t)(4*sizeof(mmm)),1,fp) != 1)
+ return FALSE;
+ 
+ copy_rvec(mmm,mu);
+ *vol = mmm[3];
+ 
+ return TRUE;
+}
+

Places

File gromacs-3.3.1.dif of Package gromacs (Revision 7db12497e1b3d8e4792a8d0c4ac70252)

Places