File raspberrypi-firmware.changes of Package raspberrypi-firmware

Overview Repositories Revisions Requests Users Attributes Meta

File raspberrypi-firmware.changes of Package raspberrypi-firmware (Revision a2d71b40bc7206202fd1e7aaacb1b6ac)

Currently displaying revision a2d71b40bc7206202fd1e7aaacb1b6ac , Show latest

-------------------------------------------------------------------
Thu Dec 19 14:53:30 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>

- Update to 0c01dbefba (2019-12-11):
  * firmware: platform: Allow fixed voltage with avs_disable=1
  * firmware: EMMC: Use PLLD for EMMC for 250MHz host-clock
    See: #1289
  * firmware: platform: Round down effective frequencies when they exceed max
    See: #1290
  * firmware: arm_loader: Pass video mode via kernel command for composite
    See: #1285
  * firmware: Fix lens shading table generation buglet
    See: https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=190586&start=75#p1534672
  * firmware: hdmi: Use RB2 timing for 2560x1440@60 if pixel clock is 241.5 MHz
  * firmware: arm_dt: Look for ethernet0 before ethernet
  * firmware: arm_dt: Set PCIe dma-ranges from memory size
  * firmware: hdmi: HDMI SM clock must not run slower than audio MAI clock …
    See: #1295
  * firmware: arm_loader: Pass video mode via kernel command for composite (master)
    See: #1285
  * firmware: power: Use Pi4 PMIC values on Pi3+
  * firmware: Fix filtered handling of array variables
    See: #1296
  * firmware: Update libfdt to v1.5.1+
    See: raspberrypi/userland#582
  * firmware: dtoverlay: Extend DT parameter syntax
  * firmware: memorymap: Include FW revision in start.elf

-------------------------------------------------------------------
Wed Dec  4 17:30:48 UTC 2019 - Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>

- Add custom gpu_mem config for RPi4 (bsc#1158406)

-------------------------------------------------------------------
Wed Nov 27 17:49:15 UTC 2019 - Matthias Brugger <mbrugger@suse.com>

- Load rpi4-genet-overlay to fix the compatible for the network device (jsc#SLE-7771)

-------------------------------------------------------------------
Tue Nov 26 17:30:58 UTC 2019 - Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>

- Enable rpi4-cma dt overlay to properly setup CMA on that platform (SLE-7771)
- Enable rpi4-pcie-ib-size-fix dt overlay to properly setup PCIe on that
  platform (SLE-7771)

-------------------------------------------------------------------
Tue Nov 26 16:13:12 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>

- Update to 6e4a7232c (2019-11-19):
  * firmware: platform: Differentiate between boostable and turbo clocks
  * firmware: arm_dt: Set WL_ON and BT_ON from .dtb
  * firmware: Fixup chosing of bit depth in legacy graphics
    See: raspberrypi/linux#3331
  * firmware: vec: Setup WideScreen Signalling outside of copy protection
    See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=256489
  * firmware: Add global reset mailbox
  * firmware: 2711: De-couple start.elf clock setup from the bootloader
  * firmware: scaler: Correct defines for SCALER_POS0_START_Y_[MASK|SHIFT] (HVS4)
  * firmware: platform: Fix missing HDMI PHY power down bit
  * firmware: Reduce voltage as part of DVFS
  * firmware: arm-loader: Inherit 2711 mac-address from the bootloader
    See: http://git/vc4/vc4/merge_requests/687
  * firmware: arm_loader: Respect all required frequencies when throttling
  * firmware: Fixup vcgencmd display_power return values

-------------------------------------------------------------------
Mon Nov 25 16:19:23 UTC 2019 - Matthias Brugger <mbrugger@suse.com>

- If booting RPi in arm64 mode or not will be set by u-boot through
  ubootconfig.txt. This allows to build u-boot for RPi3/4 with 32-bit.

-------------------------------------------------------------------
Fri Nov 15 21:17:32 UTC 2019 - Matthias Brugger <mbrugger@suse.com>

- config changes for RPi3:
  * delete upstream-aux-interrupt as not present anymore
  * set arm_control for RPi3 only
  * add RPi3 overlays

-------------------------------------------------------------------
Mon Nov 11 18:20:51 UTC 2019 - Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>

- disable vc4 on RPi4 using the disable-vc4.dtbo devicetree overlay (SLE-7771)

-------------------------------------------------------------------
Wed Nov  6 13:51:12 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>

- Update to 8e688a443 (2019-11-06):
  * firmware: Unicam: Request frequency of 250MHz when running camera use cases
  * firmware: arm_loader: Fix UART unmapping
  * firmware: uart1: Revert to the old core-frequency-locking method
    See: #1267
  * firmware: arm_loader: Provide a sensible device_tree_end default
    See: #1259
  * firmware: mmal_ril: Fix size reported on ENOSPC error
    See: #1269
  * firmware: hvs: Trigger the EOLn timer at the field rate when interlaced
    See: #1227
  * firmware: bootloader_state: Add support for a custom TFTP prefix parameter
  * firmware: arm_loader: GIC stub => 2711 stu
    See: #1255
  * firmware: arm_loader: Add os_prefix option
    See: raspberrypi/linux#3237
  * firmware: Add support for arbitrary memory specification
  * firmware: arm_loader: Fix explicit kernel name handling
    See: #1277
  * firmware: Added a new display power mailbox call
  * firmware: Update display_power gencmd with optional display id
    See: raspberrypi/linux#3050
  * firmware: Remove legacy pkgconfig to avoid Mesa conflicts
    See: raspberrypi/userland#585
  * firmware: Update display_power gencmd with optional display id
  * firmware: sysman: Fix unsafe check for h264 being enabled
    See: popcornmix/omxplayer#749
  * firmware: platform: Reduce absolute microvolts threshold to 500000
  * firmware: Loop to init hotplug

-------------------------------------------------------------------
Fri Oct  4 15:26:53 UTC 2019 - Matthias Brugger <mbrugger@suse.com>

- add RPi4 config options

-------------------------------------------------------------------
Wed Oct  2 12:15:54 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>

- Update to a16470ad4 (2019-09-30)
  * firmware: platform: Set up emmc clock earlier
  * firmware: hdmi: Implement platform_display_power on 2711
    See: #1224
  * firmware: arm_loader: Pass overscan settings to the kernel
  * firmware: arm_loader: Add option disable_fw_kms_setup to stop FKMS setup by FW
  * firmware: hdmi: Use pixel clock multiplier to determine the core clock
  * firmware: Fixups for composite output mode
    See: #1223
  * firmware: platform: Allow display_power to be queried from gencmd
    See: #1224
  * firmware: arm_loader: Fix no-DT and upstream handling
    See: #1250
  * firmware: Round up HDMI0 minimum core clock
  * firmware: board_info: Support bcm2710- and bcm2837- Pi 2 DTBs
    See: raspberrypi/linux#3234
  * firmware: power: bcm2711: Rescale the GPIO pad power
  * firmware: brfs: Add GENET driver for 2711
  * firmware: bootloader_state: Add network state and bootmode configuration
  * firmware: bootloader_state: Fix mask for EEPROM header magic
  * firmware: arm_loader: Fix initial_turbo getting stuck
    See: #1005
  * firmware: ldconfig: Support [edid=*] to mean any HDMI monitor
    See: #1136
  * firmware: image_fx: Remove restriction that output stride must match input stride
  * firmware: image_fx: Remove spamming log line
  * firmware: platform: Switch to divide by one when arm_freq exceeds 2GHz
  * firmware: Add EMMC support to 2711 Arasan EMMC driver
  * firmware: arm_loader: Use /memory@0 if found
    See: raspberrypi/linux#3244
  * firmware: bootloader_state: Fix length for bootloader_config
  * firmware: arasan_emmc: Fix STB_GPIOOVERRIDE for MMC1 in network boot
  * firmware: bfs: Verify that eth FS has not been closed before using

-------------------------------------------------------------------
Mon Sep 16 06:36:37 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>

- Do not run %preun scripts on upgrade (boo#1150408)

-------------------------------------------------------------------
Thu Sep  5 15:24:04 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>

- Update to e2e17cd03 (2019-09-04)
  * firmware: Port file loading revamp to master
  * firmware: Avoid defaulting to 64-bit kernel on older Pi
  * firmware: Revamp file loading logic
  * firmware: power: Allow reading uncached voltage
  * firmware: arm_loader: Request KMS to use CVT timings
  * firmware: vc_image: Default YUVUV to non-tall mode, with flag if required
  * firmware: ldconfig: Implement [pi2/pi3/pi3+] using board types
    See: #1242
  * firmware: platform: Remove 10mV of margin
  * firmware: power: Add 2711-specific PMIC compensation values
  * firmware: sdhost_arasan: Disable busy wait on EMMC_STATUS_NEW_CARD_DATA_SET
  * firmware: AWB: Fix for manual WB settings in capture
    See: #1215
  * firmware: arm_loader: Use platform_get_min_core_voltage for actual min voltage
  * firmware: clock: Remember disable state across clock changes
  * firmware: platform: pi4: Reduce min core voltage to 810mV
  * firmware: arm_dt: Use boost to force turbo mode rather than modifying core_freq_min for uart
  * firmware: arm_loader: Add optional flag to add_boost and get_boost calls
  * firmware: avs_2711: Move margin from init structure to run time
  * firmware: platform: fix get_min_default
  * firmware: arm_loader: Use AP_CLOCK_T for clock_iterator for easier debugging
  * hdmi: Switch to active pixel rate + margin for core clock boost
  * platform: Reduce the minimum core clock frequency from 250 to 200 MHz
  * firmware: arm_loader: Fix initial_turbo getting stuck
    See: #1005
  * firmware: clock_2711: don't set reserved values for KA in PLL KAIP registers
  * firmware: AWB: Allow user to set manual gains for the RPi algorithm
  * firmware: arm_loader: Fix disabling of audio before reboot
  * firmware: fixed up the custom CVT values to use correct group
  * firmware: hdmi: Add independent table entries for hdmi_timings on each display
    See: #1218
  * firmware: Fix to allow HDMI audio port route setting
    See: raspberrypi/linux#3100
  * firmware: pwm_audio: Use the correct DREQs on Pi4
    See: #1214
  * firmware: pixelvalve_2711: Alter back porch for widths of 1366
    See: #1202
  * firmware: Clear the SMIDSW1 display interrupt flag on startup
  * firmware: dt-blob: Declare Pi 4B's SD_IO voltage selector
  * firmware: Fixups for missing code changes from Pi4 branch
    See: #1201
  * firmware: Change order of display remapping for default display number
  * firmware: AWB: Set default number of stats regions for RPi AWB
    See: #1198
  * firmware: Fix composite interrupt HVS channel
  * firmware: scalarlib: Fix width setting for SCALERLIB_PIXEL_FORMAT_YUV10COL
  * firmware: vcmailbox: Add a new SET_AUDIO_LDO_STATE mailbox command
  * firmware: Add mailbox call to report the HDMI timings
  * firmware: H264: Set the decoder cache AXI burst length to the same as the encoder
  * firmware: gencmd: Fix gencmd max result length
  * firmware: bootloader_config: New gencmd to read the EEPROM config
  * firmware: pwm_audio: Use PWM1 on BCM2838 unless remapped
    See: #1178
  * firmware: AWB updates
    See: #1167
  * firmware: dispmanx: Fix handling of disable_overscan to not disable it totally
    See: raspberrypi/linux#3059
  * firmware: power: Enable/disable H264 and ISP clocks with domain
  * firmware: arm_loader: arm_64bit=0 should disable loading of kernel8.img
  * firmware: dt-blob: CM has no activity LED

-------------------------------------------------------------------
Wed Jul 10 15:00:12 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>

- Fix %post scripts to copy RPi4 firmware files too
- Add %preun to remove files from EFI partition
- Move Pi4 debug firmware to its own package extra-pi4 due to 
  limited size on EFI partition

-------------------------------------------------------------------
Wed Jul 10 13:24:18 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>

- Update to 025759b8 (2019-07-09):
  * firmware: hvs: Emulate the EOLn interrupt with a timer reset from VSTART
    See: #1154
  * firmware: Add support for Rec2020 colour space in vc_image, IL, and MMAL
  * firmware: Fix composite mode on devices up to Pi3B+
    See: #1166
  * firmware: Fixes for core_freq_min causing failure on HDMI1
    See: http://git/vc4/vc4/merge_requests/529
  * firmware: hdmi: Don't release previous boost until mode set is complete
    See: #1159
  * firmware: bcm_host: Adjust for 64-bit physical addresses
    See: #1161
  * firmware: arm_loader: Shrink most stubs back to 256 bytes, add arm64 GIC stub
    See: raspberrypi/linux#3032
  * firmware: arm_dispmanx: Add support for setting the colour encoding
  * firmware: dmalib: Fix Lite channel interrupt usage, and macro name
  * firmware: Force overscan off when using LCDs
    See: #1173
  * firmware: cec: Fix crash when using CEC with HDMI1
  * firmware: arm_display: Fix race condition initialising CEC
  * firmware: hdmi: Always use boost frequency for initial mode set
    See: #1159
  * firmware: AWB: Fix usage for IR operation
    See: #1167
  * firmware: arm_loader: Support CLOCK_EMMC2 from GET_CLOCK_RATE
    See: #1179
  * firmware: arm_loader: Force word alignment for the DTB
    See: #1175
  * firmware: clock_2711: don't set reserved values for KA in PLL KAIP registers
  * firmware: Assorted minor fixes for tvservice -o
  * firmware: Rename hdmi_enable_4k to hdmi_enable_4kp60
  * frimware: Revert: clock_2711: don't set reserved values for KA in PLL KAIP registers

-------------------------------------------------------------------
Wed Jun 26 06:18:15 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>

- Update to d786b62 (2019-06-25):
  * firmware: Fix AWB exception bug
  * firmware: Updates for Pi4
  * firmware: 2711: CORE, EMMC & BVB clock updates for WiFi / 4Kp60
  * firmware: 711: Use boost instead of fixed freq for 4Kp60

-------------------------------------------------------------------
Wed Jun  5 07:58:19 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>

- Update to e289f6a59 (2019-05-28):
  * firmware: smservice: Avoid a double free
  * firmware: arm_loader/display: All the framebuffer allocation to be made on the ARM
  * firmware: isp_tuners: Fix memory leak in error path
  * firmware: testc: Fix dps parsing
  * firmware: camera_subsystem: Fix hardware sync pulses off disable_camera_led
  * firmware: Replace the remaining direct users of C(mask_gpu_interrupt[0|1])
  * firmware: arm_display: Kick transposer for the rainbow screen if required
  * firmware: dispmanx: Do not allow transpose if using Full KMS
    See: raspberrypi/linux#2891
  * firmware: Revert: arm_loader/display: All the framebuffer allocation to be made on the ARM
  * firmware: arm_loader: Further conditionals for passing in a frame buffer
  * firmware: di_adv: Drop back to fast if QPUs are masked off

-------------------------------------------------------------------
Fri Mar  8 13:34:45 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>

- Update to fd15e070 (2019-03-08):
  * firmware: raspivid: Stop --raw option resetting --raw-format to YUV
    See: https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=189830&start=25#p1432589
  * firmware: Fixed up overflow in microsecond timer
    See: raspberrypi/userland#535
  * firmware: camera_subsystem: Clean up disable_camera_led handling
  * firmware: smservice: Add defines for VPU allocations
  * smservice: Add support for reporting the supported version to the host
  * firmware: Camplus: cdi: Remove requirement for calibration functions
  * firmware: isp: Reinstate lres shift parameter accidentally dropped with gamma changes
    See: #1108
  * firmware: mmal_ril: List all 4 Bayer orders if the IL component says it supports Bayer
  * firmware: camera/image_encode: Add timestamp to frames encoded with image_encode
    See: raspberrypi/linux#2351

-------------------------------------------------------------------
Thu Jan 31 08:43:07 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>

- Update to 81cca1a (2019-01-22):
  * firmware: Added ability to have an third transpose buffer
    See: #837
  * firmware: isp: Correct the conversion tables changed in adding the gamma block
    See: #1084
  * firmware: raspberrypi_full variant: Drop unused Camplus sw stages
  * bootcode: Reset WiFi and BT devices before resetting the expander
    See: #1088
  * bootcode: Fix Ethernet boot on a different subnet
    See: #1078
  * firmware: interface: Drop vcfiled
    See: raspberrypi/userland#525
  * firmware: Add reference counting to the local audio players
    See: #547
  * firmware: arm_loader: Add reporting the firmware git hash via the mailbox
  * firmware: vcos: Add reporting of which variant was built
    See: raspberrypi/linux#2806
  * firmware: Update vcdbg help
    See: #594

-------------------------------------------------------------------
Tue Jan  8 08:27:00 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>

- Update to e1bd9b0 (2018-12-21):
  * firmware: Added a mailbox function for setting gamma
  * firmware: bootcode: Support parsing of gpio filters from config.txt
    See: #1076
  * firmware: video_encode: Allow Inline Headers to be changed whilst active
  * firmware: IL: Add XRGB8888 and XBGR8888, and support on video_render, isp, and hvs
  * firmware: image_encode: Allow arbitrary buffer strides matching the appropriate multiples
  * firmware: platform: Use 3aplus dt-blob section and bcm2710-rpi-3-a-plus.dtb
  * firmware: dispmanx: Also apply overscan_scale when clamping to screen
    See: https://forum.kodi.tv/showthread.php?tid=338052
  * firmware: arm_dt: Accept "csi" as a special DT node that masks IRQs
  * firmware: MMAL: Include OPAQUE in the list of supported encodings where appropriate
    See: https://www.raspberrypi.org/forums/viewtopic.php?f=67&t=226416
  * firmware: video_render: asserting on the buffer being unlocked is invalid
  * firmware: video_render: Further fix to a vcos_verify
  * firmware: IL hvs: Fail component create if the HVS or TXP interrupts are masked
  * firmware: Clean up masked interrupt handling - moves it to intctrl
  * firmware: vcinclude: Clean up INTERRUPT_xxx defines to use one place
  * firmware: vcfw: camera_subsystem: Stop cameras being detected if ARM has Unicam instance
  * firmware: vc_image: Fix up vc_image_bits_per_pixel for YUYV variants and BGR888
  * firmware: vc_image: Make the alternate path in yuv420 to rgb888 support bgr888
  * firmware: vc_image: Add an rgb_stripe_swap_ext which takes pitches
  * firmware: vc_image_convert: yuv420 to bgr888 failed on (width&31) != 0
  * firmware: IL isp: Use gamma block to shift 10bpp YUV to the correct pipe depth
  * firmware: video_encode: Always set the input port nBufferSize to match the image
  * firmware: Camera/ISP: Allow option to disable demosaicing

-------------------------------------------------------------------
Fri Nov 30 12:50:54 UTC 2018 - Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>

- Removed upstream-mmc and rpi3-hdmi overlays as not needed anymore
- Added Conflicts statement to avoid issues with older kernels

-------------------------------------------------------------------
Tue Nov 20 11:16:37 UTC 2018 - Guillaume GARDET <guillaume.gardet@opensuse.org>

- Update to 55e591283 (2018-11-05):
  * firmware: Move to driver based backlight
    See: #1063
  * bootcode: Extend TEST_UNIT_READY timeout to 20 seconds, 
    some hard drives take a really long time
    See: #898
  * firmware: video_render: Treat an empty buffer with ENDOFFRAME set as 
    a flush
  * firmware: dispmanx: Add option to ignore all layers lower than the 
    current layer

-------------------------------------------------------------------
Wed Oct 17 08:50:51 UTC 2018 - Guillaume GARDET <guillaume.gardet@opensuse.org>

- Update to 10c1c5f96 (2018-10-15):
  * firmware: jpeg/mjpeg: MJPEG doesn't insert JFIF APP0 header
    See: https://github.com/raspberrypi/userland/issues/345
  * firmware: Add IL HVS component
  * firmware: mmal: Acquire zero copy buffers on being passed to the VPU
  * firmware: video_render: Use per pixel alpha on RGBA and BGRA
  * firmware: video_render: Add support for alpha options (MIX and PREMULT)
  * firmware: video_encode: Use default values on invalid nStride or nSliceHeight
    See: https://github.com/raspberrypi/firmware/issues/1051
  * firmware: gpioman/FXL6408: Handle open failing sensibly
    See: https://github.com/raspberrypi/firmware/issues/1053
  * firmware: Delay backlight coming on
    See: https://github.com/raspberrypi/firmware/issues/1052
  * firmware: LCD driver close fixes
  * 2ndstage: ignore autoboot.txt if boot partition is already set
    See: https://github.com/raspberrypi/noobs/issues/508
  * firmware: 2ndstage: Report IP address in ARP response in network order
  * firmware: video_decode: Fix error in previous memory leak patch
  * firmware: video_encode: Add ISP conversion support for RGBX32
  * firmware: platform: Also report soft temperature limit in get_throttled bits
  * firmware: IL isp: minor code cleanups
  * firmware: image_encode: Support Video domain on input port
  * firmware: Camplus: annotate: Check lines_available >= lines_required
    See: https://github.com/raspberrypi/userland/issues/485
  * firmware: arm_dt: Work around an absent cache-line-size
    See: https://github.com/raspberrypi/linux/issues/2643
  * firmware: rawcam: Fix double buffer return issue
  * firmware: rawcam: Code cleanup
  * firmware: host_apps: Fixup partially merged commit from userland
    See: https://github.com/raspberrypi/firmware/issues/1027
  * firmware: mmal: Add KEEP_PORT_FORMATS flag to mmal connection
    See: https://github.com/raspberrypi/userland/pull/483
  * firmware: RaspiStill: Apply gpsd info as EXIF tags
    See: https://github.com/raspberrypi/userland/pull/286
  * firmware: video_encode: Drop back to software conversion if stride is not mod32
    See: https://github.com/Hexxeh/rpi-firmware/issues/182
  * firmware: arm_dt: Break out GPIO save/restore from HAT code as needed for PoE

-------------------------------------------------------------------
Thu Aug 16 13:41:12 UTC 2018 - guillaume.gardet@opensuse.org

- Update to 953a3396 (2018-08-10):
  * firmware: MMAL/IL: Fix for reducing alignment patch
    See: https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=62364
  * firmware: Added a dpi_timings config item
  * firmware: Add DPI Driver default settings
  * firmware: HVS channel should come from the DISPLAY_INFO

-------------------------------------------------------------------
Wed Jul 11 12:18:48 UTC 2018 - guillaume.gardet@opensuse.org

- Update to d3c3d031 (2018-07-09):
  * firmware: pwm_sdm: fix an edge case when reading back DMA 
    source addresses
  * firmware: pwm_sdm: fix write handle refcounting
  * firmware: arm_loader: Update NOTIFY_REBOOT to reset the GPIO 
    expander
  * firmware: Allow selection of DSI port for LCD
  * firmware: dtoverlay: More "reg" and "name" support
  * firmware: imx219: Updates for production test
  * firmware: variant: Disable custom_preproc and focus_stats_preproc 
    camera stages
  * firmware: bootcode: Force an I2C stop as a reset
  * firmware: power: Ensure at least 2ms between writes to the PMIC regs
  * firmware: power: Add 3ms threshold
  * firmware: power: Reduce i2c speed of pmic to 100kHz

-------------------------------------------------------------------
Thu Jun  7 07:35:12 UTC 2018 - guillaume.gardet@opensuse.org

- Update to ab802d3 (2018-06-03):
  * revert: sdram: Reduce address skew from -10 to -5
  * sdram: Reduce address skew from -10 to -5 
  * platform: Avoid improving the schmoo on Pi3+
  * platform: Latest AVS rules
  * sdram: Increase read/write latency for higher sdram frequencies
  * power: Add boot-time 3b+ PMIC register logging
  * power: Continue to probe PMIC after error
  * Match phy setup same as bootcode for device mode initialisation
  * Add logging_messages to UART
  * Fix 3B+ bootcode.bin only booting
  * video_encode: Filter the list of encoders based on variant
  * mmal: Relax requirement on a buffer in mmal_port_send_buffer
  * platform: avs: Also apply chicken bits to boost voltage

-------------------------------------------------------------------
Thu May 24 11:25:26 UTC 2018 - fvogt@suse.com

- Allow u-boot to set arm_control to support 32-bit images on RPi3

-------------------------------------------------------------------
Fri Apr 20 13:22:58 UTC 2018 - guillaume.gardet@opensuse.org

- config: replace dtoverlay=vc4-kms-v3d and dtoverlay=dwc2 by 
  dtoverlay=upstream, this fix gfx for RPi1-256M version

-------------------------------------------------------------------
Thu Apr 19 07:30:25 UTC 2018 - guillaume.gardet@opensuse.org

- Update to a154f21 (2018-04-16):
  * Partial revert for eemc clock change for slice
  * config: Add gpio command
  * hat_lib: Only probe HAT EEPROM if ID pins are inputs
  * Added a arm_display_kick function
  * Possible fix for HDMI audio pause
  * arm_loader: Always set the turbo frequencies immediately

-------------------------------------------------------------------
Thu Apr  5 17:07:29 UTC 2018 - agraf@suse.com

- Allow user defined config options (bsc#1088356)
- Move HDMI workaround to rpi3 section (fixes RPi2 HDMI output)

-------------------------------------------------------------------
Wed Mar 14 09:34:05 UTC 2018 - agraf@suse.com

- Update to 3347884 (2018-03-13)
  - Add support for new RPi3 B+ (bsc#1085262)

-------------------------------------------------------------------
Mon Feb 19 10:48:28 UTC 2018 - agraf@suse.com

- Add overlays to match previous U-Boot provided DT
- Add Recommends: on dt and config packages

-------------------------------------------------------------------
Fri Feb 16 13:50:46 UTC 2018 - agraf@suse.com

- Update to 445b6a8 (2018-02-09)

-------------------------------------------------------------------
Wed Jan 31 12:54:22 UTC 2018 - jengelh@inai.de

- Avoid bashisms in %post

-------------------------------------------------------------------
Mon Jan 22 10:23:06 UTC 2018 - agraf@suse.com

- Merge config.txt files into a single config.txt with subsections
- Set GPU memory usage to 32MB, this is enough for vc4 (boo#1074566)
- Update to 050175d (2018-01-17)

-------------------------------------------------------------------
Sat Nov 25 19:03:08 UTC 2017 - afaerber@suse.de

- Add rpi0w sub-package and config (boo#1069828). Derived from rpi3.
- Update to abfb4be3e1 (2017-11-17)

-------------------------------------------------------------------
Thu Oct 12 08:47:43 UTC 2017 - guillaume@opensuse.org

- Update to a88e126a (2017-10-11)

-------------------------------------------------------------------
Wed Aug 23 14:01:08 UTC 2017 - guillaume@opensuse.org

- Update to 8fe001e (2017-08-22)

-------------------------------------------------------------------
Wed Apr 19 04:14:55 UTC 2017 - afaerber@suse.de

- Update to b038854 (2017-04-04)

-------------------------------------------------------------------
Mon Feb 20 18:12:19 UTC 2017 - malcolmlewis@opensuse.org

- Update to 2b495ac (2017-02-20)

-------------------------------------------------------------------
Thu Jan 12 14:24:06 UTC 2017 - guillaume@opensuse.org

- Update to e44f66a (2017-01-10)

-------------------------------------------------------------------
Fri Nov 18 16:18:56 UTC 2016 - guillaume@opensuse.org

- Update to 64996b0 (2016-11-16)

-------------------------------------------------------------------
Tue Oct 25 07:52:59 UTC 2016 - guillaume@opensuse.org

- Update to 4a0e54e (2016-10-20)

-------------------------------------------------------------------
Wed Oct 12 13:33:31 UTC 2016 - guillaume@opensuse.org

- Update to a021d6e (2016-10-11)

-------------------------------------------------------------------
Tue Sep 27 09:09:10 UTC 2016 - guillaume@opensuse.org

- Increase from 64 MB to 96 MB of RAM for GPU for RPi with 256 or 
  512 MB of RAM to be able to decode a 1080p h264 video in kodi

-------------------------------------------------------------------
Tue Sep 27 08:53:46 UTC 2016 - guillaume@opensuse.org

- Update to ad8608c (2016-09-21)

-------------------------------------------------------------------
Thu Sep 15 08:53:28 UTC 2016 - fvogt@suse.com

- Use "avoid_warnings=1" in config-rpi{,2,3}.txt (bsc#998973)

-------------------------------------------------------------------
Mon Sep 12 13:30:41 UTC 2016 - afaerber@suse.de

- Clean up config-{rpi2,rpi3}.txt, dropping rpi1 defaults
* On the rpi1 Model B rev. 2 performance results are similar
  with and without defaults, so in doubt leave our settings in
  config-rpi.txt until proven the defaults work better somewhere.

-------------------------------------------------------------------
Tue Sep  6 08:33:28 UTC 2016 - fvogt@suse.com

- Use default frequencies in config-rpi{2,3}.txt (bsc#989511)
* Defaults work well on rpi2
* Allow much higher frequencies on rpi3

-------------------------------------------------------------------
Fri Sep  2 15:29:14 UTC 2016 - afaerber@suse.de

- get-from-git.sh: Update for -config-rpi* sub-packages
- Update to 334f548 (2016-09-02)
- Add post-install scripts to copy files to /boot/efi where needed.
  /boot/vc may be the mountpoint for boot.scr based installations
  or a symlink to /boot/efi. (bsc#996064)

-------------------------------------------------------------------
Wed Aug 24 13:21:26 UTC 2016 - mpluskal@suse.com

- Update to d0bc6ce (2016.08.23)

-------------------------------------------------------------------
Thu Jul 21 19:59:56 UTC 2016 - mpluskal@suse.com

- Update to 051aed7 (2016.07.15)
- Simplify spec file a bit

-------------------------------------------------------------------
Thu Jun 16 15:51:19 UTC 2016 - afaerber@suse.de

- Fix last changelog entry
- Run format_spec_file in pre_checkin.sh to fix spec file header
- Restore silently dropped defattr that breaks older builds

-------------------------------------------------------------------
Mon Jun  6 11:44:28 UTC 2016 - dmueller@suse.com

- remove branding-openSUSE subpackage and split config
  into the 3 variants for (rpi, rpi2, rpi3)

-------------------------------------------------------------------
Tue May 31 09:59:59 UTC 2016 - guillaume@opensuse.org

- Update to ac0c0bf (2016-05-20)

-------------------------------------------------------------------
Tue May 10 17:58:12 UTC 2016 - dmueller@suse.com

- mark package as noarch (adds rpmlintrc)
- split extra bootloaders into separate -extra subpackage

-------------------------------------------------------------------
Wed May  4 19:37:54 UTC 2016 - afaerber@suse.de

- Enable aarch64 builds for Raspberry Pi 3

-------------------------------------------------------------------
Fri Apr 29 08:49:32 UTC 2016 - guillaume@opensuse.org

- Update to 20958cd (2016-04-27)

-------------------------------------------------------------------
Wed Apr  6 12:11:46 UTC 2016 - guillaume@opensuse.org

- Update to c065500 (2016-04-05)

-------------------------------------------------------------------
Mon Mar  7 14:41:14 UTC 2016 - afaerber@suse.de

- Revert to last actual change b48c36f (2016-03-04)
- Fix version bug found by Guillaume by using git-log (as intended)

-------------------------------------------------------------------
Mon Mar  7 12:54:59 UTC 2016 - guillaume@opensuse.org

- Update to 845eb06 (2016-03-05)

-------------------------------------------------------------------
Mon Mar  7 12:50:58 UTC 2016 - guillaume@opensuse.org

- Fix get-from-git.sh to get version even when packaged files are 
  not in the last commit

-------------------------------------------------------------------
Tue Mar  1 14:49:16 UTC 2016 - guillaume@opensuse.org

- Update Config.txt (add GPU mem option for 1024 MB version)

-------------------------------------------------------------------
Tue Mar  1 14:47:38 UTC 2016 - guillaume@opensuse.org

- Update to 9cd1c6c (2016-02-29)

-------------------------------------------------------------------
Thu Feb 25 15:05:36 UTC 2016 - guillaume@opensuse.org

- Update to 565197e (2016-02-19)

-------------------------------------------------------------------
Thu Feb  4 14:37:48 UTC 2016 - guillaume@opensuse.org

- Update to cb2ffaa (2016-02-01)

-------------------------------------------------------------------
Thu Jan 14 10:58:53 UTC 2016 - guillaume@opensuse.org

- Update to 7147575 (2016-01-13)

-------------------------------------------------------------------
Tue Dec  8 16:29:07 UTC 2015 - afaerber@suse.de

- Update to 224c756 (2015-12-08)

-------------------------------------------------------------------
Tue Dec  8 16:13:14 UTC 2015 - afaerber@suse.de

- Move files from /boot to /boot/vc to allow directly updating the
  FAT partition through a /boot/vc mount
- Require the main package for the branding package

-------------------------------------------------------------------
Sun Nov 29 14:08:53 UTC 2015 - afaerber@suse.de

- Update to ed611df (2015-11-25)
* Clarifies licensing of start_*.elf files
- Improve get-from-git.sh
* Automate file removal and addition
* Use date of last relevant change
- Add branding-openSUSE subpackage, based on a to-do item in
  openSUSE:Factory:ARM JeOS package's uboot-image-install.in script
* Update comment about zImage to reflect current U-Boot situation

-------------------------------------------------------------------
Wed Oct 28 14:07:32 UTC 2015 - afaerber@suse.de

- Add get-from-git.sh script as source file (sr#341314)

-------------------------------------------------------------------
Mon Oct 26 18:11:24 UTC 2015 - afaerber@suse.de

- Update to 4047fe2 (2015-10-23)
- Throw out all non-free gfx sub-packages and files

-------------------------------------------------------------------
Mon Oct 12 09:45:37 UTC 2015 - guillaume@opensuse.org

- Update to ba7a8fb (2015-10-11)

-------------------------------------------------------------------
Mon Aug 17 07:22:16 UTC 2015 - guillaume@opensuse.org

- Update to e1e2823 (2015-08-15)

-------------------------------------------------------------------
Fri Aug 14 09:05:41 UTC 2015 - guillaume@opensuse.org

- Update to c25cc51 (2015-08-13)

-------------------------------------------------------------------
Mon Jul 20 14:44:42 UTC 2015 - guillaume@opensuse.org

- Update to cf20cb2 (2015-07-17)

-------------------------------------------------------------------
Tue Jun 23 09:32:02 UTC 2015 - guillaume@opensuse.org

- Update to e8f6e12 (2015-06-22)

-------------------------------------------------------------------
Thu Jun  4 20:44:41 UTC 2015 - guillaume@opensuse.org

- Update to 16044ee (2015-06-02)

-------------------------------------------------------------------
Mon Feb 16 10:40:36 UTC 2015 - guillaume@opensuse.org

- Add %{_bindir}/raspividyuv

-------------------------------------------------------------------
Mon Feb 16 09:42:23 UTC 2015 - guillaume@opensuse.org

- Update to 8aca576 (2015-02-14)

-------------------------------------------------------------------
Tue Feb 10 18:46:23 UTC 2015 - bill@merriam.net

- Update spec file to change ExclusiveArch to %arm to support the ARMv7 RPi

-------------------------------------------------------------------
Wed Nov  5 17:02:33 UTC 2014 - guillaume@opensuse.org

- Update to 0080d30 (2014-11-04)

-------------------------------------------------------------------
Thu Oct 16 12:30:27 UTC 2014 - guillaume@opensuse.org

- Update to e4afeda (2014-10-12)

-------------------------------------------------------------------
Wed May 14 07:27:53 UTC 2014 - bwiedemann@suse.com

- Update to c0319ac (2014-05-13)

-------------------------------------------------------------------
Wed Oct 30 12:10:50 UTC 2013 - guillaume@opensuse.org

- Add "Provides: libEGL.so.1 libGLESv1_CM.so.1 libGLESv2.so.2" to
fix libs deps

-------------------------------------------------------------------
Tue Oct 29 17:21:27 UTC 2013 - guillaume@opensuse.org

- Fix Mesa conflicts for EGL, GLESv1 and GLESv2 libs

-------------------------------------------------------------------
Tue Oct 29 17:11:49 UTC 2013 - guillaume@opensuse.org

- Update to 4c14569 (2013-10-18)

-------------------------------------------------------------------
Mon Sep  9 19:35:47 UTC 2013 - guillaume.gardet@opensuse.org

- Move bins and libs to standard path (/usr/*) so remove /opt/vc/lib
    from lib search path (keep symlinks in /opt/vc for compatibility
    purpose)

-------------------------------------------------------------------
Sun Sep  8 16:36:30 UTC 2013 - seife+obs@b1-systems.com

- Update to f6bb324 (2013-09-07)
- add script to fetch tarball from git
- add /opt/vc/lib to library search path so that demo apps in
  raspberrypi-gfx actually work

-------------------------------------------------------------------
Thu Jul  4 16:46:16 UTC 2013 - guillaume@opensuse.org

- Update to ca5f9c4 (2013-07-02) and now use hardfp

-------------------------------------------------------------------
Wed Jul  3 08:17:05 UTC 2013 - guillaume@opensuse.org

- Enable build for armv6l

-------------------------------------------------------------------
Mon Apr  8 09:28:47 UTC 2013 - lars@linux-schulserver.de

- Update to baa3ecffe6 (2013-04-08):
  + ALSA fix to improve mame audio. 
  + Add camera demo apps.
  + Removed unnecessary executable bits in documentation
  + improved README

-------------------------------------------------------------------
Sun Dec 30 18:40:55 UTC 2012 - bwiedemann@suse.com

- Update to 76d0ac3 (2012-12-28) to support 512MB RAM

-------------------------------------------------------------------
Thu Oct 25 10:15:37 UTC 2012 - guillaume@opensuse.org

- Update to 14a55da (2012.10.21) and add support to GFX

-------------------------------------------------------------------
Fri Oct 19 09:27:31 UTC 2012 - bwiedemann@suse.com

- rename output to raspberrypi-firmware to be consistent

-------------------------------------------------------------------
Sun Aug 12 10:45:31 UTC 2012 - bwiedemann@suse.com

- initial package from 
  https://github.com/raspberrypi/firmware/ cb9513f

Places

File raspberrypi-firmware.changes of Package raspberrypi-firmware (Revision a2d71b40bc7206202fd1e7aaacb1b6ac)

Places