File _service:obs_scm:vrnetlab-git1688785276.5a42305... of Package vrnetlab

Overview Repositories Revisions Requests Users Attributes Meta

File _service:obs_scm:vrnetlab-git1688785276.5a42305.obscpio of Package vrnetlab (Revision 20a56e72d3fc751293df0452a2e4d163)

Currently displaying revision 20a56e72d3fc751293df0452a2e4d163 , Show latest

07070100000000000041ED00000000000000000000000364A8D17C00000000000000000000000000000000000000000000002700000000vrnetlab-git1688785276.5a42305/.github07070100000001000041ED00000000000000000000000264A8D17C00000000000000000000000000000000000000000000003100000000vrnetlab-git1688785276.5a42305/.github/workflows07070100000002000081A400000000000000000000000164A8D17C000010D7000000000000000000000000000000000000003A00000000vrnetlab-git1688785276.5a42305/.github/workflows/test.ymlname: "Build and Test virtual routers"

on:
  pull_request:
  push:
    branches:
      - main
      - master

env:
  PNS: ci-${GITHUB_RUN_ID}
  DOCKER_REGISTRY: ghcr.io/vrnetlab/vrnetlab

jobs:
  test-vr-xcon-and-vr-bgp:
    runs-on: ubuntu-22.04
    steps:
      - uses: actions/checkout@v3

- name: Build vr-xcon
        run: |
          make vr-xcon

- name: Test vr-xcon
        run: |
          make vr-xcon-test

- name: Save vr-xcon logs
        if: always()
        run: |
          make -C vr-xcon docker-test-save-logs

- name: Clean test vr-xcon containers
        if: always()
        run: make -C vr-xcon docker-test-clean

# vr-bgp depends on the vr-xcon container image, so let's build it right
      # now on the same runner ...
      - name: Build vr-bgp
        run: |
          make vr-bgp

- name: Test vr-bgp
        run: |
          make vr-bgp-test

- name: Save vr-bgp logs
        if: always()
        run: |
          make -C vr-bgp docker-test-save-logs

- name: Clean test vr-bgp containers
        if: always()
        run: make -C vr-bgp docker-test-clean

test-vr:
    runs-on: ["self-hosted"]
    container:
      image: vrnetlab/ci-builder
      volumes:
        - /data/gh-runner/vrnetlab-images:/vrnetlab-images
    strategy:
      fail-fast: false
      matrix:
        platform: ['csr', 'nxos', 'nxos9kv', 'routeros', 'sros', 'veos', 'vmx', 'vqfx', 'vrp', 'vsr1000', 'xrv', 'xrv9k']

steps:
      - uses: actions/checkout@v3
      - name: Fixup dubious ownership
        run: git config --global --add safe.directory ${GITHUB_WORKSPACE}

- name: Use git to check if the source files (platform or shared) have changed
        uses: dorny/paths-filter@v2
        id: source_changes
        with:
          filters: |
            platform:
              - '${{ matrix.platform }}/**/*'
              - 'common/*'

- name: Compute platform image hashes in bind-mounted volume
        run: |
          shasum -a 512 /vrnetlab-images/${{ matrix.platform }}/* > hash-${{ matrix.platform }}.txt || touch hash-${{ matrix.platform }}.txt
          cat hash-${{ matrix.platform }}.txt

- name: Cache image hashes
        id: cache-hash
        uses: actions/cache@v3
        with:
          path: cache-hash-${{ matrix.platform }}.txt
          key: hash-${{ matrix.platform }}

- name: Compare computed image hashes with cached hashes
        id: image_changes
        run: |
          if diff hash-${{ matrix.platform }}.txt cache-hash-${{ matrix.platform}}.txt; then
            echo platform=false >> ${GITHUB_OUTPUT};
            echo "No image changes detected for ${{ matrix.platform }}";
          else
            echo platform=true >> ${GITHUB_OUTPUT};
            echo "Image changes detected for ${{ matrix.platform }}";
          fi

- name: Build ${{ matrix.platform }}
        if: ${{ steps.source_changes.outputs.platform == 'true' || steps.image_changes.outputs.platform == 'true' }}
        run: |
          cp /vrnetlab-images/${{ matrix.platform }}/* ${{ matrix.platform }} || true
          ls -al ${{ matrix.platform }}
          make ${{ matrix.platform }}

- name: Test ${{ matrix.platform }}
        if: ${{ steps.source_changes.outputs.platform == 'true' || steps.image_changes.outputs.platform == 'true' }}
        run: |
          make ${{ matrix.platform }}-test

- name: Save ${{ matrix.platform }} logs
        if: ${{ always() && (steps.source_changes.outputs.platform == 'true' || steps.image_changes.outputs.platform == 'true') }}
        run: |
          make -C ${{ matrix.platform }} docker-test-save-logs

- uses: actions/upload-artifact@v3
        if: ${{ always() && (steps.source_changes.outputs.platform == 'true' || steps.image_changes.outputs.platform == 'true') }}
        with:
          name: vr-logs
          path: |
            ${{ matrix.platform }}/*.log

- name: Clean test ${{ matrix.platform }} containers
        if: ${{ always() && (steps.source_changes.outputs.platform == 'true' || steps.image_changes.outputs.platform == 'true') }}
        run: make -C ${{ matrix.platform }} docker-test-clean

- name: Persist image hashes
        run: mv hash-${{ matrix.platform }}.txt cache-hash-${{ matrix.platform }}.txt
07070100000003000081A400000000000000000000000164A8D17C000007C9000000000000000000000000000000000000002E00000000vrnetlab-git1688785276.5a42305/.gitlab-ci.ymlimage: vrnetlab/ci-builder

variables:
  PNS: ci-${CI_PIPELINE_ID}

stages:
  - build

.build: &build-template
  stage: build
  tags:
    - vrnetlab
  script:
    # make sure we pulled LFS files
    - git lfs fetch -I ${CI_JOB_NAME}
    - git lfs checkout ${CI_JOB_NAME}
    - ls -l ${CI_JOB_NAME}
    # We allow the user to control which Docker registry is used through the
    # env var DOCKER_REGISTRY. If it is not set then we assume we should use
    # the GitLab built-in Docker registry so we check if it is enabled.
    # CI_REGISTRY is only set when the GitLab Docker registry is enabled
    - if [ -z "${DOCKER_REGISTRY}" ]; then if [ -n "${CI_REGISTRY}" ]; then export DOCKER_USER=gitlab-ci-token; export DOCKER_PASSWORD=${CI_JOB_TOKEN}; export DOCKER_REGISTRY=${CI_REGISTRY_IMAGE}; fi; fi
    - 'echo "DOCKER_REGISTRY: ${DOCKER_REGISTRY}"'
    # if DOCKER_REGISTRY set, either explicitly by user or implicitly by GitLab
    # (see above) we login to repo, build images and push them
    - if [ -n "${DOCKER_REGISTRY}" ]; then docker login -u ${DOCKER_USER} -p=${DOCKER_PASSWORD} ${DOCKER_REGISTRY}; fi
    - if [ -n "${DOCKER_REGISTRY}" ]; then
    -   make ${CI_JOB_NAME}
    -   make ${CI_JOB_NAME}-test
    -   echo "Pushing images"
    -   make ${CI_JOB_NAME}-push
    - fi
  interruptible: true
  after_script:
    # save logs for artifacts
    - make -C ${CI_JOB_NAME} docker-test-save-logs
    # clean up leftover (failed) test containers
    - make -C ${CI_JOB_NAME} docker-test-clean
  artifacts:
    when: always
    paths:
      - ${CI_JOB_NAME}/*.log

vr-xcon:
  <<: *build-template

vr-bgp:
  <<: *build-template

csr:
  <<: *build-template

nxos:
  <<: *build-template

nxos9kv:
  <<: *build-template

routeros:
  <<: *build-template

sros:
  <<: *build-template

veos:
  <<: *build-template

vmx:
  <<: *build-template

vsr1000:
  <<: *build-template

vqfx:
  <<: *build-template

vrp:
  <<: *build-template

xrv:
  <<: *build-template

xrv9k:
  <<: *build-template
07070100000004000081A400000000000000000000000164A8D17C0000005E000000000000000000000000000000000000003200000000vrnetlab-git1688785276.5a42305/CODE_OF_CONDUCT.md# Code of conduct
Please be civilised and nice to each other. We're all humans. Act like one.
07070100000005000081A400000000000000000000000164A8D17C000002C2000000000000000000000000000000000000002F00000000vrnetlab-git1688785276.5a42305/CONTRIBUTING.md# Contributing to vrnetlab

Thank you for (considering) contributing to vrnetlab!

## Bugs?
Please report bugs as issues here on GitLab! Also feel free to use issues for asking questions on how to use vrnetlab etc too.

## New feature?
Do you want to build something new? Please open an issue describing your idea so that we can align how it is best implemented. Discussing before you start coding significantly increases the chance that your code will be merged smoothly and without lots of refactoring etc.

If you don't want to code but have an idea for a new feature, please open an issue.

## Code submission
Submit your code as a Pull Request (PR). Make sure it applies cleanly to the master branch!
07070100000006000081A400000000000000000000000164A8D17C00000455000000000000000000000000000000000000002700000000vrnetlab-git1688785276.5a42305/LICENSEThe MIT License (MIT)

Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
07070100000007000081A400000000000000000000000164A8D17C000001A4000000000000000000000000000000000000002800000000vrnetlab-git1688785276.5a42305/MakefileIMAGES_DIR=
VRS = vr-xcon vr-bgp csr nxos nxos9kv routeros sros veos vmx vsr1000 vqfx vrp xrv xrv9k
VRS_PUSH = $(VRS:=-push)
VRS_TEST = $(VRS:=-test)

.PHONY: all $(VRS) $(VRS_PUSH) $(VRS_TEST)

all: $(VRS)

$(VRS):
ifneq ($(IMAGES_DIR),)
	cp -av $(IMAGES_DIR)/$@/* $@/
endif
	cd $@; $(MAKE)

docker-push: $(VRS_PUSH)

$(VRS_PUSH):
	cd $(@:-push=); $(MAKE) docker-push

$(VRS_TEST):
	cd $(@:-test=); $(MAKE) docker-test
07070100000008000081A400000000000000000000000164A8D17C000055A0000000000000000000000000000000000000002900000000vrnetlab-git1688785276.5a42305/README.mdvrnetlab - VR Network Lab
-------------------------
Run your favourite virtual routers in docker for convenient labbing,
development and testing.

vrnetlab is being developed for the TeraStream project at Deutsche Telekom as
part of an automated CI environment for testing our network provisioning
system.

It supports:

* Arista vEOS
 * Cisco CSR1000v
 * Cisco Nexus NX-OS (using Titanium emulator)
 * Cisco XRv
 * Cisco XRv 9000
 * Juniper vMX
 * Juniper vQFX
 * Nokia VSR
 
I talk a little about it during my presentation about TeraStream testing at
the NetNod autumn meeting 2016 - https://youtu.be/R_vCdGkGeSk?t=9m25s

Brian Linkletter has written a good introduction too https://www.brianlinkletter.com/vrnetlab-emulate-networks-using-kvm-and-docker/

Usage
-----
You have to build the virtual router docker images yourself since the license
agreements of commercial virtual routers do not allow me to distribute the
images. See the README files of the respective virtual router types for more
details.

You need KVM enabled in your kernel for hardware assisted virtualization. While
it may be possible to run without it, it has not been tested. Make sure you
load the kvm kernel module: `modprobe kvm`.

Let's assume you've built the `xrv` router.

Start two virtual routers:
```
docker run -d --name vr1 --privileged vr-xrv:5.3.3.51U
docker run -d --name vr2 --privileged vr-xrv:5.3.3.51U
```
I'm calling them vr1 and vr2. Note that I'm using XRv 5.3.3.51U - you should
fill in your XRv version in the image tag as the "latest" tag is not added to
any images.

It takes a few minutes for XRv to start but once up you should be able to SSH
into each virtual router. You can get the IP address using docker inspect:
```
root@host# docker inspect --format '{{.NetworkSettings.IPAddress}}' vr1
172.17.0.98
```
Now SSH to that address and login with the default credentials of
vrnetlab/VR-netlab9:
```
root@host# ssh -l vrnetlab $(docker inspect --format '{{.NetworkSettings.IPAddress}}' vr1)
The authenticity of host '172.17.0.98 (172.17.0.98)' can't be established.
RSA key fingerprint is e0:61:28:ba:12:77:59:5e:96:cc:58:e2:36:55:00:fa.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '172.17.0.98' (RSA) to the list of known hosts.

IMPORTANT:  READ CAREFULLY
Welcome to the Demo Version of Cisco IOS XRv (the "Software").
The Software is subject to and governed by the terms and conditions
of the End User License Agreement and the Supplemental End User
License Agreement accompanying the product, made available at the
time of your order, or posted on the Cisco website at
www.cisco.com/go/terms (collectively, the "Agreement").
As set forth more fully in the Agreement, use of the Software is
strictly limited to internal use in a non-production environment
solely for demonstration and evaluation purposes.  Downloading,
installing, or using the Software constitutes acceptance of the
Agreement, and you are binding yourself and the business entity
that you represent to the Agreement.  If you do not agree to all
of the terms of the Agreement, then Cisco is unwilling to license
the Software to you and (a) you may not download, install or use the
Software, and (b) you may return the Software as more fully set forth
in the Agreement.

Please login with any configured user/password, or cisco/cisco

vrnetlab@172.17.0.98's password:

RP/0/0/CPU0:ios#show version
Mon Jul 18 09:04:45.261 UTC

Cisco IOS XR Software, Version 5.3.3.51U[Default]
...
```

You can also login via NETCONF:
```
root@host# ssh -l vrnetlab $(docker inspect --format '{{.NetworkSettings.IPAddress}}' vr1) -p 830 -s netconf
vrnetlab@172.17.0.98's password:
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
 <capabilities>
  <capability>urn:ietf:params:netconf:base:1.1</capability>
  <capability>urn:ietf:params:xml:ns:yang:ietf-netconf-monitoring</capability>
  <capability>urn:ietf:params:netconf:capability:candidate:1.0</capability>
  <capability>urn:ietf:params:netconf:capability:rollback-on-error:1.0</capability>
  <capability>urn:ietf:params:netconf:capability:validate:1.1</capability>
  <capability>urn:ietf:params:netconf:capability:confirmed-commit:1.1</capability>
  <capability>http://cisco.com/ns/yang/Cisco-IOS-XR-aaa-lib-cfg?module=Cisco-IOS-XR-aaa-lib-cfg&amp;revision=2015-08-27</capability>
  <capability>http://cisco.com/ns/yang/Cisco-IOS-XR-aaa-locald-admin-cfg?module=Cisco-IOS-XR-aaa-locald-admin-cfg&amp;revision=2015-08-27</capability>
  <capability>http://cisco.com/ns/yang/Cisco-IOS-XR-aaa-locald-cfg?module=Cisco-IOS-XR-aaa-locald-cfg&amp;revision=2015-08-27</capability>
  <capability>http://cisco.com/ns/yang/Cisco-IOS-XR-aaa-locald-oper?module=Cisco-IOS-XR-aaa-locald-oper&amp;revision=2015-08-27</capability>
  <capability>http://cisco.com/ns/yang/Cisco-IOS-XR-bundlemgr-cfg?module=Cisco-IOS-XR-bundlemgr-cfg&amp;revision=2015-08-27</capability>
...
```

The serial console of the devices are mapped to port 5000. Use telnet to connect:
```
root@host# telnet $(docker inspect --format '{{.NetworkSettings.IPAddress}}' vr1) 5000
```
Just like with any serial port, you can only have one connection at a time and
while the router is booting the launch script will connect to the serial port
to do the initialization of the router. As soon as it is done the port will be
released and made available to the next connection.

To connect two virtual routers with each other we can use the `vr-xcon`
container. Let's say we want to connect Gi0/0/0/0 of vr1 and vr2 with each
other, we would do:
```
docker run -d --name vr-xcon --link vr1 --link vr2 vr-xcon --p2p vr1/1--vr2/1
```

Configure a link network on vr1 and vr2 and you should be able to ping!
```
P/0/0/CPU0:ios(config)#inte GigabitEthernet 0/0/0/0
RP/0/0/CPU0:ios(config-if)#no shutdown
RP/0/0/CPU0:ios(config-if)#ipv4 address 192.168.1.2/24
RP/0/0/CPU0:ios(config-if)#commit
Mon Jul 18 09:13:24.196 UTC
RP/0/0/CPU0:Jul 18 09:13:24.216 : ifmgr[227]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Down
RP/0/0/CPU0:ios(config-if)#dRP/0/0/CPU0:Jul 18 09:13:24.256 : ifmgr[227]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Up
o ping 192.168.1.1
Mon Jul 18 09:13:26.896 UTC
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
```
(obviously I configured the other end too!)

All of the NICs of the virtual routers are exposed via TCP ports by KVM. TCP
port 10001 maps to the first NIC of the virtual router, which in the case of an
XR router is GigabitEthernet 0/0/0/0. By simply connecting two of these TCP
sockets together we can bridge the traffic between those two NICs and this is
exactly what vr-xcon is for. Use the `--p2p` argument to specify the links.
The format is X/Y--Z/N where X is the name of the first router and Y is the
port on that router. Z is the second router and N is the port on the second
router.

To set up more than one p2p link, simply add more mappings separated by space
and don't forget to link the virtual routers:
```
docker run -d --name vr-xcon --link vr1 --link vr2 --link vr3 vr-xcon --p2p vr1/1--vr2/1 vr1/2--vr3/1
```
See topology-machine/README.md for details on topology machine which can help
you with managing more complex topologies.

The containers expose port 22 for SSH, port 161 for SNMP, port 830 for NETCONF
and port 5000 is mapped to the virtual serial device (use telnet). All the NICs
of the virtual routers are exposed via TCP ports in the range 10001-10099.

Use `docker rm -f vr1` to stop and remote a virtual router.

Handy shell functions
---------------------
There are some handy shell functions in vrnetlab.sh that provides shorthands
for connecting to ssh and console.

1. Load the functions into your shell
```
. vrnetlab.sh
```
2. Login via ssh to router vr1, you can optionally specify a username. If no
username is provided, the default of vrnetlab will be used. If sshpass is
installed, you will not be promted for password when you login with the default
username.
```
vrssh vr1 myuser 
```
3. Connect console to router vr1
```
vrcons vr1
```
4. Create a bridge between two router interfaces, the below command bridges
interface 1 of router vr1 with interface 1 of router 2.
```
vrbridge vr1 1 vr2 1
```

To load these aliases on login, copy it to ~/.vrnetlab_bashrc and add the
following to your .bashrc
```
test -f ~/.vrnetlab_bashrc && . ~/.vrnetlab_bashrc
```

Virtual routers
---------------
There are a number of virtual routers available on the market:

* Cisco XRv
 * Juniper VRR
 * Juniper vMX
 * Nokia VSR

All of the above are released as a qcow2 or vmdk file (which can easily be
converted into qcow2) making them easy to spin up on a Linux machine. Once spun
up there are a few tasks one normally wants to perform:

* set an IP address on a management interface
 * start SSH / NETCONF daemon (and generate crypto keys)
 * create initial user so we can login

There might be more things to the list but this is the bare minimum which makes
the router remotely reachable and thus we can configure the rest from the
normal provisioning system.

vrnetlab aims to make this process as simple and convenient as possible so that
it may be used both by humans and automated systems to spin up virtual routers.
In addition, there are scripts to help you generate topologies.

The virtual machines are packaged up in docker container. Since we need to
start KVM the docker containers have to be run with `--privileged` which
effectively defeats the security features of docker. Our use of docker is
essentially reduced to being a packaging format but a rather good one at that.
Also note that since we still rely on KVM the same amount of resources, if not
sightly more, will be consumed by vrnetlab. A container is no thinner than a VM
if the container contains a VM!

The assignment of a management IP address is handed over to docker, so you can
use whatever docker IPAM plugin you want. Overall the network setup of the
virtual routers are kind of shoe-horned into the world of docker networking.
I'm not sure this is a good idea but it seems to work for now and it was fun
putting it together ;)

It's possible to remotely control a docker engine and tell it to start/stop
containers. It's not entirely uncommon to run the CI system in a VM and letting
it remotely control another docker engine can give us some flexibility in where
the CI runner is executed vs where the virtual routers are running.

libvirt can also be remotely controlled so it could potentially be used to the
same effect. However, unlike libvirt, docker also has a registry concept which
greatly simplifies the distribution of the virtual routers. It's already neatly
packaged up into a container image and now we can pull that image through a
single command. With libvirt we would need to distribute the VM image and
launch scripts as individual files.

The launch script differ from router to router. For example, it's possible to
feed a Cisco XR router a bootup config via a virtual CD-ROM drive so we can use
that to enable SSH/NETCONF and create a user. Nokia VSR however does not, so we
need to tell KVM to emulate a serial device and then have the launch script
access that virtual serial port via telnet to do the initial config.

The intention is to keep the arguments to each virtual router type as similar
as possible so that a test orchestrator or similar need minimal knowledge about
the different router types.

System requirements
-------------------
You need to run these docker images on a machine that has a docker engine and
that supports KVM, i.e. you need a Linux kernel.

Docker is available for OS X and it works by spinning up a Linux VM on top of
the xhyve hypervisor. While this means that we do have a docker engine and a
Linux kernel, we are unable to use this for vrnetlab as xhyve does not offer
nested virtualization and thus we cannot run KVM in the VM running in xhyve.

VirtualBox does not offer nested virtualization either. Parallels and VMWare
supposedely do but I don't have access to those and can't test with.

See the README file of each virtual router type for CPU, RAM and disk
requirements.

Low performance / virtual routers not starting properly
-------------------------------------------------------
If you are having problems with performance, like routers not starting or being
very slow, there are a few knobs to tweak in order to improve the situation.

The basic problem is an unfortunate combination of CPU throttling and process
scheduling causing cache thrasing which in turn leads to terrible performance.
No detailed measurements have been done to confirm this exact behaviour but the
recommended remedy has been confirmed working in multiple cases.

vrnetlab runs virtual machines using qemu/KVM, which appear just as normal
processes in Linux and are thus subject to the Linux process scheduler. If a
process wants to do work it will be scheduled to run on a core. Now, if not all
cores are used, APM will throttle down some of the cores such that the workload
can run on the remaining, say 3 out of 12 cores.  The Linux scheduler will try
to schedule processes on the cores with the higher clock speed but if you have
more VMs than cores with high clock speed than it will start moving VMs around.
L1/L2 caches are not shared by CPU cores, only L3.  Moving a process from one
core to another inevitably means that the cache is evicted. When processes are
moved around continuously we get cache thrasing and this appears to lower
performance for the VMs significantly. For some virtual routers it is to the
point where we hit various watchdog timeouts and the VMs will restart.

The very first step is to make sure you aren't trying to run too many virtual
routers on the same physical host. Some virtual routers, like Nokia SROS, has a
rather low idle CPU usage of a few percent typically. Others, like Cisco XRV9k
and Juniper vMX have a forwarding plane that is busy-looping over multiple CPU
cores, thus consuming the entire CPU core. Trying to schedule multiple such
virtual machines over the same CPU cores can lead to failure.

To improve performance, we can start by changing the CPU governor in Linux to
`performance`, for example using `cpupower frequency-set -g performance`. It
likely won't help much but try it first since it's considerably easier than the
following steps.

Disable Advanced Power Management (APM) or similar in BIOS. This will
completely prevent the CPU cores from throttling down and they will run at
their designed maximum clock frequency. This probably means turbo boost
(increasing clock frequency on a smaller subset of cores while decreasing the
frequency on remaining cores to remain at the same power and temperature
envelope) will be disabled too. Performance across all cores will however be
much more deterministic. This alone usually means that the Linux process
scheduler will now keep processes on the same cores instead of moving them
around. Before only some of the cores would run at a higher frequency and so
would be more attractive to schedule work on. With all cores at the same
frequency, there is no reason for the process scheduler to move processes
around. This removes the main cause of cache thrashing. At least that's the
simplified view of it but it appears to be working rather well in reality.

If performance is still not adequate the next step would be to disable
hyperthreading. Hyperthreading is a technology to expose two logical cores that
are executed by the same physical core. It's a strategy to avoid pipeline
stalls, essentially where the CPU waits for memory. By having two logical
threads, the CPU core can switch to the other thread whenever it needs to wait
for memory lookups. It increases total concurrent throughput, however, each
logical thread will run slower than if it had run directly on a physical CPU
core.

You can avoid the effects of hyperthreading by only scheduling your qemu
processes on half of the cores. You would need to inspect /proc/cpuinfo to
determine the exact logical core layout and make sure you only schedule
processes on one logical thread of each physical core. However, since you would
then only use half of the threads, it is easier to just disable hyperthreading
in BIOS altogether.

Applying the mentioned mitigations has so far resolved performance issues in
all cases. Report if it doesn't for you.

Docker healthcheck
-----------------
vrnetlab containers use the Docker healthcheck mechanism to report whether
they've started up properly or not.

FUAQ - Frequently or Unfrequently Asked Questions
-------------------------------------------------
##### Q: Why don't you ship pre-built docker images?
A: I don't think Cisco, Juniper or Nokia would allow me to distribute their virtual
   router images and since one of the main points of vrnetlab is to have a self
   contained docker image I don't see any other way than for you to build your
   own image based on vrnetlab but where you get to download the router image
   yourself.

##### Q: Why don't you ship docker images where I can provide the image through a volume?
A: I don't like the concept as it means you have to ship around an extra file.
   If it's a self-contained image then all you have to do is push it to your
   docker registry and then ask a box in your swarm cluster to spin it up!

##### Q: Using docker typically means no persistent storage. How is configuration persisted across restarts?
A: It is not persisted. The state of the virtual routers is lost once they are
stopped/removed. It's not possible to restart vrnetlab or at least it's not at
all tested and I don't see how it would work really. Since the primary use case
is lab / CI you should embrace the statelessness :)

##### Q: Will this consume less resources than the normal way of running XRv, vmX etc?
A: No. vrnetlab still runs KVM (in docker) to start the virtual router which
means that we will consume just as much CPU and memory, if not slightly more,
than running the router in KVM.

##### Q: If it doesn't consume less resources than KVM, why use Docker?
A: It's used primarily as a packaging format. All vrnetlab containers can be
run with similar arguments. The differences between different platforms are
effectively hidden to present a clean uniform interface. That's certainly not
true for trying to run XRv or vMX directly with qemu / virsh.

##### Q: Do you plan to support classic IOS?
A: IOS XE is available through the CSR1000v image which should satisfy all
your oldskool needs.

##### Q: How do I connect a vrnetlab router with a normal docker container?
A: I'm not entirely sure. For now you have to live with only communicating
between vrnetlab routers. There's https://github.com/TOGoS/TUN2UDP and I
suppose the same idea could be used to bridge the TCP-socket NICs used by
vrnetlab to a tun device, but if all this should happen inside a docker
container or if we should rely on setting this up on the docker host (using
something similar to pipework) is not entirely clear to me. I'll probably work
on it.

##### Q: How does this relate to GNS3, UNetLab and VIRL?
A: It was a long time since I used GNS3 and I have only briefly looked at
UNetLab and VIRL but from what I know or can see, these are all more targeted
towards interactive labbing. You get a pretty UI and similar whereas vrnetlab
is controlled in a completely programmatic fashion which makes them good at
different things. vrnetlab is superb for CI and programmatic testing where the
others probably target labs run by humans.

Building with GitLab CI
-----------------------
vrnetlab ships with a .gitlab-ci.yml config file so if you happen to be using
GitLab CI you can use this file to let your CI infrastructure build the docker
images and push them to your registry.

GitLab features a built-in Docker registry which will be used per default - all
you need to do is enable the registry for your vrnetlab project. The necessary
information will be exposed as env vars in GitLab CI which is picked up by the
build config.

The CI runner executing the jobs must have the tag 'vrnetlab'. Make sure this
runner supports running VMs (has KVM) and allows the execution of sibling
docker containers.

If you want, you can use an external docker registry by explicitly configuring
the following environment variables:

* DOCKER_USER - the username to authenticate to the docker registry with
 * DOCKER_PASSWORD - the password to authenticate to the docker registry with
 * DOCKER_REGISTRY - the URL to the docker registry, like reg.example.com:5000

Next you need to add the actual virtual router images to the git repository.
You can create a separate branch where you add the images as to avoid potential
git merge issues. I recommend using LFS:
```
git checkout -b images
git lfs track "*.vmdk"
git add xrv/iosxrv-k9-demo-6.0.0.vmdk .gitattributes
git commit -a -m "Added Cisco XRv 6.0.0 image"
git push your-git-repo images
```
Now CI should build the images and push to wherever $DOCKER_REGISTRY points. If
you don't want to use LFS then just skip that command.

When new changes are commited to the upstream repo/master you can just rebase
your branch on top of that:
```
git checkout master
git pull origin master
git checkout images
git rebase master
git push --force your-git-repo images
```
Note that you have to force push since you've rewritten git history.

LFS is a way to store large files with git but keeping them out of git. It's
great for the virtual router images as they never change (version is in the
filename) and so we don't really need git's version tracking for them. LFS is
considerably faster than plain git. For very large files it is possible to run
into LFS timeouts, try setting:
```
git config lfs.dialtimeout 60
```
07070100000009000041ED00000000000000000000000264A8D17C00000000000000000000000000000000000000000000003000000000vrnetlab-git1688785276.5a42305/ci-builder-image0707010000000A000081A400000000000000000000000164A8D17C00000104000000000000000000000000000000000000003B00000000vrnetlab-git1688785276.5a42305/ci-builder-image/DockerfileFROM debian:bullseye

RUN apt-get update \
 && apt-get install -y \
    curl \
	docker.io \
	make \
 && curl -s https://packagecloud.io/install/repositories/github/git-lfs/script.deb.sh | bash \
 && apt-get install -y git-lfs \
 && rm -rf /var/lib/apt/lists/*
0707010000000B000041ED00000000000000000000000264A8D17C00000000000000000000000000000000000000000000002600000000vrnetlab-git1688785276.5a42305/common0707010000000C000081ED00000000000000000000000164A8D17C00000157000000000000000000000000000000000000003500000000vrnetlab-git1688785276.5a42305/common/healthcheck.py#!/usr/bin/env python3

import sys

try:
    health_file = open("/tmp/health", "r")
    health = health_file.read()
    health_file.close()
except FileNotFoundError:
    print("health status file not found")
    sys.exit(2)

exit_status, message = health.strip().split(" ", 1)

if message != '':
    print(message)

sys.exit(int(exit_status))
0707010000000D000081A400000000000000000000000164A8D17C00003AE4000000000000000000000000000000000000003200000000vrnetlab-git1688785276.5a42305/common/vrnetlab.py#!/usr/bin/env python3

import datetime
import logging
import math
import os
import random
import re
import subprocess
import telnetlib
import time

MAX_RETRIES=60

# Global list of ports that we want to set up forwarding from container IP ->
# mgmt IP of router (usually 10.0.0.15). Each entry consists of the protocol,
# the source port (on the outside of the container) and the destination port
# (on the virtual router).
HOST_FWDS = [
    ('tcp', 22, 22),      # SSH
    ('udp', 161, 161),    # SNMP
    ('tcp', 830, 830),    # NETCONF
    ('tcp', 80, 80),      # HTTP
    ('tcp', 443, 443),    # HTTPS
]

def gen_mac(last_octet=None):
    """ Generate a random MAC address that is in the qemu OUI space and that
        has the given last octet.
    """
    return "52:54:00:%02x:%02x:%02x" % (
            random.randint(0x00, 0xff),
            random.randint(0x00, 0xff),
            last_octet
        )

def run_command(cmd, cwd=None, background=False):
    res = None
    try:
        if background:
            p = subprocess.Popen(cmd, cwd=cwd)
        else:
            p = subprocess.Popen(cmd, stdout=subprocess.PIPE, cwd=cwd)
            res = p.communicate()
    except:
        pass
    return res

class VM:
    def __str__(self):
        # TODO: use this in the logger?!
        return f"{self.__class__.__name__}[{self.num}]"

def __init__(self, username, password, disk_image=None, num=0, ram=4096):
        self.logger = logging.getLogger()
        self.start_time = datetime.datetime.now()

# username / password to configure
        self.username = username
        self.password = password

self.num = num
        self.image = disk_image

self.running = False
        self.spins = 0
        self.p = None
        self.tn = None
        self.qm = None

#  various settings
        self.uuid = None
        self.fake_start_date = None
        self.nic_type = "e1000"
        self.num_nics = 0
        self.nics_per_pci_bus = 26 # tested to work with XRv
        self.smbios = []

self.qemu_args = ["qemu-system-x86_64", "-display", "none", "-machine", "pc" ]
        self.qemu_args.extend(["-monitor", "tcp:0.0.0.0:40%02d,server,nowait" % self.num])
        self.qemu_args.extend(["-m", str(ram),
                               "-serial", "telnet:0.0.0.0:50%02d,server,nowait" % self.num])
        self.qemu_args.extend(self.create_overlay_image())
        # enable hardware assist if KVM is available
        if os.path.exists("/dev/kvm"):
            self.qemu_args.insert(1, '-enable-kvm')

def start(self):
        self.logger.info("Starting %s" % self)

cmd = list(self.qemu_args)

# uuid
        if self.uuid:
            cmd.extend(["-uuid", self.uuid])

# do we have a fake start date?
        if self.fake_start_date:
            cmd.extend(["-rtc", "base=" + self.fake_start_date])

# smbios
        for e in self.smbios:
            cmd.extend(["-smbios", e])

# setup PCI buses
        for i in range(1, math.ceil(self.num_nics / self.nics_per_pci_bus) + 1):
            cmd.extend(["-device", "pci-bridge,chassis_nr={},id=pci.{}".format(i, i)])

# generate mgmt NICs
        cmd.extend(self.gen_mgmt())
        # generate normal NICs
        cmd.extend(self.gen_nics())

self.logger.debug(cmd)

self.p = subprocess.Popen(cmd, stdout=subprocess.PIPE,
                        stderr=subprocess.PIPE, universal_newlines=True)

try:
            outs, errs = self.p.communicate(timeout=2)
            self.logger.info("STDOUT: %s" % outs)
            self.logger.info("STDERR: %s" % errs)
        except:
            pass

for i in range(1, MAX_RETRIES+1):
            try:
                self.qm = telnetlib.Telnet("127.0.0.1", 4000 + self.num)
                break
            except:
                self.logger.info("Unable to connect to qemu monitor (port {}), retrying in a second (attempt {})".format(4000 + self.num, i))
                time.sleep(1)
            if i == MAX_RETRIES:
                raise QemuBroken("Unable to connect to qemu monitor on port {}".format(4000 + self.num))

for i in range(1, MAX_RETRIES+1):
            try:
                self.tn = telnetlib.Telnet("127.0.0.1", 5000 + self.num)
                break
            except:
                self.logger.info("Unable to connect to qemu monitor (port {}), retrying in a second (attempt {})".format(5000 + self.num, i))
                time.sleep(1)
            if i == MAX_RETRIES:
                raise QemuBroken("Unable to connect to qemu monitor on port {}".format(5000 + self.num))
        try:
            outs, errs = self.p.communicate(timeout=2)
            self.logger.info("STDOUT: %s" % outs)
            self.logger.info("STDERR: %s" % errs)
        except:
            pass

def gen_host_forwards(self, mgmt_ip='10.0.0.15', offset=4000):
        """Generate the host forward argument for qemu
        HOST_FWDS contain the ports we want to forward and allows mapping a
        container (source) port to a different destination port on the VR/VM.
        We do a straight mapping here and let socat do the port mapping. Since
        multiple source ports can be mapped to the same destination port, we
        first unique the set of ports.
        """
        fwd_ports = {(proto, dst_port) for proto, src_port, dst_port in HOST_FWDS}
        # hostfwd=tcp::2022-10.0.0.15:22,...
        return ",".join("hostfwd=%s::%d-%s:%d" % (proto, port + offset, mgmt_ip, port) for proto, port in fwd_ports)

def gen_mgmt(self):
        """ Generate qemu args for the mgmt interface(s)
        """
        res = []
        # mgmt interface is special - we use qemu user mode network
        res.append("-device")
        # vEOS-lab requires its Ma1 interface to be the first in the bus, so let's hardcode it
        if 'vEOS-lab' in self.image:
            res.append(self.nic_type + ",netdev=p%(i)02d,mac=%(mac)s,bus=pci.1,addr=0x2"
                       % { 'i': 0, 'mac': gen_mac(0) })
        else:
            res.append(self.nic_type + ",netdev=p%(i)02d,mac=%(mac)s"
                       % { 'i': 0, 'mac': gen_mac(0) })
        res.append("-netdev")
        res.append("user,id=p%(i)02d,net=10.0.0.0/24,tftp=/tftpboot,%(hostfwd)s" % { 'i': 0, 'hostfwd': self.gen_host_forwards() })

return res

def gen_nics(self):
        """ Generate qemu args for the normal traffic carrying interface(s)
        """
        res = []
        # vEOS-lab requires its Ma1 interface to be the first in the bus, so start normal nics at 2
        if 'vEOS-lab' in self.image:
            range_start = 2
        else:
            range_start = 1
        for i in range(range_start, self.num_nics+1):
            # calc which PCI bus we are on and the local add on that PCI bus
            pci_bus = math.floor(i/self.nics_per_pci_bus) + 1
            addr = (i % self.nics_per_pci_bus) + 1

res.append("-device")
            res.append("%(nic_type)s,netdev=p%(i)02d,mac=%(mac)s,bus=pci.%(pci_bus)s,addr=0x%(addr)x" % {
                       'nic_type': self.nic_type,
                       'i': i,
                       'pci_bus': pci_bus,
                       'addr': addr,
                       'mac': gen_mac(i)
                    })
            res.append("-netdev")
            res.append("socket,id=p%(i)02d,listen=:%(j)02d"
                       % { 'i': i, 'j': i + 10000 })
        return res

@property
    def overlay_disk_image(self) -> str:
        """Generate the overlay disk image name for VM instance

The overlay image name is derived from the base image name and the num
        attribute (unique per VM instance).  For example the SROS_lc(slot=1)
        first linecard uses the name sros-1-overlay.qcow2. This ensures that
        each VM gets its own overlay.
        """
        return re.sub(r'(\.[^.]+$)', fr'-{self.num}-overlay\1', self.image)

def create_overlay_image(self):
        """Creates an overlay disk image

If one does not exist it is created. Return an array of parameters to
        extend qemu_args. A subclass may want to override this for using
        specific drive id.
        """
        if not os.path.exists(self.overlay_disk_image):
            self.logger.debug("Creating overlay disk image")
            out = run_command(["qemu-img", "create", "-f", "qcow2", "-F", "qcow2", "-b", self.image, self.overlay_disk_image])
            self.logger.debug(out)
        return ["-drive", "if=ide,file=%s" % self.overlay_disk_image]

def stop(self):
        """ Stop this VM
        """
        self.running = False

try:
            self.p.terminate()
        except ProcessLookupError:
            return

try:
            self.p.communicate(timeout=10)
        except:
            try:
                # this construct is included as an example at
                # https://docs.python.org/3.6/library/subprocess.html but has
                # failed on me so wrapping in another try block. It was this
                # communicate() that failed with:
                # ValueError: Invalid file object: <_io.TextIOWrapper name=3 encoding='ANSI_X3.4-1968'>
                self.p.kill()
                self.p.communicate(timeout=10)
            except:
                # just assume it's dead or will die?
                self.p.wait(timeout=10)

def restart(self):
        """ Restart this VM
        """
        self.stop()
        self.start()

def wait_write(self, cmd, wait='#', con=None):
        """ Wait for something on the serial port and then send command

Defaults to using self.tn as connection but this can be overridden
            by passing a telnetlib.Telnet object in the con argument.
        """
        con_name = 'custom con'
        if con is None:
            con = self.tn

if con == self.tn:
            con_name = 'serial console'
        if con == self.qm:
            con_name = 'qemu monitor'

if wait:
            self.logger.trace("waiting for '%s' on %s" % (wait, con_name))
            #res = con.read_until(wait.encode())
            (ridx, match, res) = con.expect([str.encode(wait)], 3)
            self.logger.trace("read from %s: %s" % (con_name, res.decode()))
        self.logger.debug("writing to %s: %s" % (con_name, cmd))
        con.write("{}\r".format(cmd).encode())

def work(self):
        self.check_qemu()
        if not self.running:
            try:
                self.bootstrap_spin()
            except EOFError:
                self.logger.error("Telnet session was disconnected, restarting")
                self.restart()

def bootstrap_spin(self):
        raise NotImplementedError()

def check_qemu(self):
        """ Check health of qemu. This is mostly just seeing if there's error
            output on STDOUT from qemu which means we restart it.
        """
        if self.p is None:
            self.logger.debug("VM not started; starting!")
            self.start()

# check for output
        try:
            outs, errs = self.p.communicate(timeout=1)
        except subprocess.TimeoutExpired:
            return
        self.logger.info("STDOUT: %s" % outs)
        self.logger.info("STDERR: %s" % errs)

if errs != "":
            self.logger.debug("KVM error, restarting")
            self.stop()
            self.start()

def wait_config(self, show_cmd, expect, spins=90):
        """ Some configuration takes some time to "show up".
            To make sure the device is really ready, wait here.
        """
        self.logger.debug('waiting for {} to appear in {}'.format(expect, show_cmd))
        wait_spins = 0
        # 10s * 90 = 900s = 15min timeout
        while wait_spins < spins:
            # On some devices (Huawei VRP), the command to disable paging
            # only has a temporary effect?!
            # To make sure we're not getting paged output, send the no_paging_command
            # always, if the attribute exists on the extended VM class.
            try:
                self.wait_write(self.no_paging_command, wait=None)
            except AttributeError:
                pass
            self.wait_write(show_cmd, wait=None)
            _, match, data = self.tn.expect([expect.encode('UTF-8')], timeout=10)
            self.logger.trace(data.decode('UTF-8'))
            if match:
                self.logger.debug('a wild {} has appeared!'.format(expect))
                return True
            wait_spins += 1
        self.logger.error('{} not found in {}'.format(expect, show_cmd))
        return False

@property
    def version(self):
        """Read version number from VERSION environment variable

The VERSION environment variable is set at build time using the value
        from the makefile. If the environment variable is not defined please add
        the variables in the Dockerfile (see csr)"""
        version = os.environ.get("VERSION")
        if version is not None:
            return version
        raise ValueError("The VERSION environment variable is not set")

class VR:
    def __init__(self, username, password):
        self.logger = logging.getLogger()
        self.vms = []

try:
            os.mkdir("/tftpboot")
        except:
            pass

def update_health(self, exit_status, message):
        health_file = open("/tmp/health", "w")
        health_file.write("%d %s" % (exit_status, message))
        health_file.close()

def start_socat(self, src_offset=0, dst_offset=2000):
        for proto, src_port, dst_port in HOST_FWDS:
            run_command(["socat", "%s-LISTEN:%d,fork" % (proto.upper(), src_port + src_offset),
                         "%s:127.0.0.1:%d" % (proto.upper(), dst_port + dst_offset)],
                         background=True)

def start(self):
        """ Start the virtual router
        """
        self.logger.debug("Starting vrnetlab %s", self)
        self.logger.debug("VMs: %s", self.vms)
        self.start_socat()

started = False
        while True:
            all_running = True
            for vm in self.vms:
                vm.work()
                if not vm.running:
                    all_running = False

if all_running:
                self.update_health(0, "running")
                started = True
            else:
                if started:
                    self.update_health(1, "VM failed - restarting")
                else:
                    self.update_health(1, "starting")

class VR_Installer:
    def __init__(self):
        self.logger = logging.getLogger()
        self.vm = None

def install(self):
        vm =  self.vm
        while not vm.running:
            self.logger.trace("%s working", self)
            vm.work()
        self.logger.debug("%s running, shutting down", self)
        vm.stop()
        self.logger.info("Installation complete")

class QemuBroken(Exception):
    """ Our Qemu instance is somehow broken
    """
0707010000000E000041ED00000000000000000000000364A8D17C00000000000000000000000000000000000000000000003200000000vrnetlab-git1688785276.5a42305/config-engine-lite0707010000000F000081A400000000000000000000000164A8D17C0000021E000000000000000000000000000000000000003D00000000vrnetlab-git1688785276.5a42305/config-engine-lite/DockerfileFROM ubuntu:jammy
MAINTAINER Kristian Larsson <kristian@spritelink.net>

ENV DEBIAN_FRONTEND=noninteractive

RUN apt-get update -qy \
 && apt-get upgrade -qy \
 && apt-get install -y \
    bridge-utils \
    iproute2 \
    libffi-dev \
    libffi-dev \
    libjpeg8-dev \
    libssl-dev \
    libxml2-dev \
    libxslt1-dev \
    libyaml-dev \
    python3-dev \
    python3-ipy \
    python3-lxml \
    python3-pip \
    zlib1g-dev \
 && rm -rf /var/lib/apt/lists/* \
 && pip3 install napalm

ADD configengine /

ENTRYPOINT ["/configengine"]
07070100000010000081A400000000000000000000000164A8D17C00000177000000000000000000000000000000000000003B00000000vrnetlab-git1688785276.5a42305/config-engine-lite/Makefileifdef DOCKER_REGISTRY
ifneq ($(DOCKER_REGISTRY), $(shell echo $(DOCKER_REGISTRY) | sed -ne '/^[A-Za-z0-9.]\+:[0-9]\+$$/p'))
$(error Bad docker registry URL. Should follow format registry.example.com:1234)
endif
    REGISTRY=$(DOCKER_REGISTRY)/
else
    REGISTRY=
endif

all:
	docker build -t $(REGISTRY)vr-configengine .

docker-push:
	docker push $(REGISTRY)vr-configengine
07070100000011000081A400000000000000000000000164A8D17C00000D86000000000000000000000000000000000000003C00000000vrnetlab-git1688785276.5a42305/config-engine-lite/README.mdvrnetlab Config Engine lite
===========================
Config Engine lite is a small provisioning system shipped with vrnetlab,
primarily written for three use cases:

* configure routers in a vrnetlab topology such that the functionality of
   vrnetlab itself can be tested, for example, we want to make sure that
   interfaces are correctly mapped
 * accelerate labing. If you want to do some specific iBGP testing you might
   not be all too interested in setting IP addresses on the 7 routers required
   for your test or configure an entire IGP - use config engine to quickly
   provision the basics and do the rest by hand!
 * serve as inspiration for how you can write a provisioning system running

It's called 'lite' since it doesn't aspire to become a full blown provisioning
system. While it might grow and gain new functionality it will always be
targeted for the requirements of the above, in particular the testing of
vrnetlab itself.

Usage
-----
After building the docker image, you run it like this. There are two modes of operation, topology mode and single-router-mode.

### Topology mode
Use config-engine-lite and jinja2 templates to configure your topomachine topology.
```
docker run -v $(pwd)/templates:/templates -v $(pwd)/topology:/topology --link router1 --link router2 vr-configengine --topo /topology/lltopo.json --xr /templates/xr.j2 --junos /templates/junos.j2 --run
```

* -v $(pwd)/templates:/templates - Mount a directory containing your templates inside the container
 * -v $(pwd)/topology/topology - Mount a directory containing your topology files inside the container
 * --link router1 --link router2 - Link all routers specified in your topology, enabling config-engine-lite to configure them
 * --topo /topology/lltopo.json - The low level topology built by topology-machine, This references to the /topology mountpoint
 * --ios /templates/ios.j2 - Configuration template for IOS (CSR 1000v), this references to the /templates mountpoint
 * --xr /templates/xr.j2 - Configuration template for ios-xr, this references to the /templates mountpoint
 * --junos /templates/junos.j2 - Configuration template for JunOS, this refrences to the /templates mountpoint
 * --run - Actually deploy the configuration. If this is not specified, the configuration changes will not be committed and config diff will be printed.

### Single-router mode
Apply a configuration template to a single router, useful for bootstrapping a router for use with vr-bgp for instance.
```
docker run -v $(pwd)/templates:/templates --link router1 vr-configengine --type xrv --router router1 --config /templates/router1.j2 --attrs "key1=value1,key2=value2"
```
 * -v $(pwd)/templates:/templates - Mount a directory containing your templates inside the container
 * --link router1 - Link the router you want to configure
 * --config /templates/router1.j2 - Your router configuration, references /templates moutpoint
 * --type vmx - Type of router to configure (valid values are vmx, xrv and csr)
 * --attr "key=value" - A key/value pair available in the template, can be specified multiple times.

### Common parameters
These parameters are available in both modes
 * --wait-for-boot - Block until we can connect to the router via SSH. If neither --diff or --run is used this option will simply block until all your routers are started
 * --diff - Print configuration diff and discard the configuration
 * --run - Commit the configuration to the router
07070100000012000041ED00000000000000000000000264A8D17C00000000000000000000000000000000000000000000004300000000vrnetlab-git1688785276.5a42305/config-engine-lite/config_templates07070100000013000081A400000000000000000000000164A8D17C000001B1000000000000000000000000000000000000005200000000vrnetlab-git1688785276.5a42305/config-engine-lite/config_templates/ios-example.j2hostname {{ hostname }}

interface Loopback0
 ip address 10.255.0.{{id}} 255.255.255.255
 ipv6 address 2001:db8::{{ id }}/128
 ipv6 enable

{%- for link in links %}
interface {{ link.interface }}
 description {{ link.remote.router }}: {{ link.remote.interface }}
 ip address 10.1.{{ link.id }}.{{ link.octet }} 255.255.255.252
 ipv6 address 2001:db8::1:{{ link.id }}:{{ link.octet }}/126
 ipv6 enable
 no shut
{%- endfor %}
lldp run
07070100000014000081A400000000000000000000000164A8D17C000002B8000000000000000000000000000000000000005400000000vrnetlab-git1688785276.5a42305/config-engine-lite/config_templates/junos-example.j2system {
    host-name {{ hostname }};
}
interfaces {
    lo0 {
        unit 0 {
            family inet {
                address 10.255.0.{{id}}/32;
            }
            family inet6 {
                address 2001:db8::{{id}}/128;
            }
        }
    }
{%- for link in links %}
    {{link.interface}} {
        description "{{link.remote.router}}: {{link.remote.interface}}";
        unit 0 {
            family inet {
                address 10.1.{{link.id}}.{{link.octet}}/30;
            }
	    family inet6 {
                address 2001:db8::1:{{link.id}}:{{link.octet}}/126;
            }
        }
    }
{%- endfor %}
}
protocols {
    lldp {
        interface all;
    }
}
07070100000015000081A400000000000000000000000164A8D17C00000166000000000000000000000000000000000000005100000000vrnetlab-git1688785276.5a42305/config-engine-lite/config_templates/xr-example.j2hostname {{ hostname }}

interface Loopback0
 ipv4 address 10.255.0.{{id}}/32
 ipv6 address 2001:db8::{{id}}/112
{%- for link in links %}
interface {{ link.interface }}
 description {{link.remote.router}}: {{link.remote.interface}}
 ipv4 address 10.1.{{link.id}}.{{link.octet}}/30
 ipv6 address 2001:db8::1:{{link.id}}:{{link.octet}}/126
{%- endfor %}

lldp
07070100000016000081ED00000000000000000000000164A8D17C0000260C000000000000000000000000000000000000003F00000000vrnetlab-git1688785276.5a42305/config-engine-lite/configengine#!/usr/bin/env python3

import json
import sys
import jinja2
import pprint
import napalm
import paramiko.ssh_exception
import jnpr.junos.exception
import time

class RouterList:
    def __init__(self):
        self.routers = []

def append(self, router):
        self.routers.append(router)

def get(self, name):
        for router in self.routers:
            if router.name == name:
                return router

def list(self):
        return self.routers

class Router:
    def __init__(self):
        self.id = 0
        self.name = ""
        self.type = ""
        self.template = None
        self.config = None
        self.links = []
        self.attrs = {}
        self.device = None
        self.loaded = False

def connect(self, wait_for_boot=False):
        if self.type == "xrv":
            driver = napalm.get_network_driver("iosxr")
        elif self.type == "vmx":
            driver = napalm.get_network_driver("junos")
        elif self.type == "csr":
            driver = napalm.get_network_driver("ios")
        else:
            raise Exception("Unknown device type: {}".format(self.type))

self.device = driver(self.get_address(), "vrnetlab", "VR-netlab9")
        TIMEOUT = 60*15
        TIMER = 0

if wait_for_boot:
            while True:
                try:
                    if TIMER >= TIMEOUT:
                        # Timeout if router hasn't started in 15 minutes.
                        raise TimeoutError("Timed out wating for router {} to start".format(self.name))
                    self.device.open()
                    return self.device
                except paramiko.ssh_exception.SSHException:
                    # xrv and csr throws this exception when connection
                    # failed, wait a bit and retry.
                    TIMER += 2
                    time.sleep(2)
                except jnpr.junos.exception.ConnectError:
                    # vmx throws this exception when connection failed
                    # wait a bit and retry
                    TIMER += 2
                    time.sleep(2)
        else:
            self.device.open()
            return self.device

def load_merge(self):
        if not self.device:
            self.connect()
        self.loaded = True
        return self.device.load_merge_candidate(config=self.config)

def commit_config(self):
        if not self.loaded:
            raise Exception("Please run load_merge first")

return self.device.commit_config()

def discard_config(self):
        if not self.loaded:
            raise Exception("Please run load_merge first")

return self.device.discard_config()

def compare_config(self):
        if not self.loaded:
            raise Exception("Please run load_merge first")

return self.device.compare_config()

def get_address(self):
        import subprocess
        import socket

try:
            return socket.gethostbyname(self.name)
        except socket.gaierror:
            # Try docker inspect if gethostbyname fails
            cmd = [ "docker", "inspect", "--format", 
                    "'{{.NetworkSettings.IPAddress}}'", self.name ]
            p = subprocess.Popen(cmd, stdout=subprocess.PIPE, cwd=".")
            return str(p.communicate()[0].strip().replace("'", ""))

def add_attr(self, key, value):
        self.attrs[key] = value

class ConfigBootstrap:
    def __init__(self, wait_for_boot):
        self.routers = RouterList() 
        self.wait_for_boot = wait_for_boot

def load_router(self, name, model, template, attrs):
        router = Router()
        router.id = 1
        router.name = name

for k in attrs:
            router.add_attr(k, attrs[k])
        
        router.type = model
        router.template = template

self.routers.append(router)
        
    def load_topology(self, topology, xr, junos, ios):
        self.routers = RouterList()

i = 1
        for name in topology["routers"]:
            elem = topology["routers"][name]
            router = Router()

if "id" not in elem:
                router.id = i
            else:
                router.id = elem["id"]

for key in elem:
                if key not in ["id", "type"]:
                    router.add_attr(key, elem[key])

router.name = name
            router.type = elem["type"]

if router.type == "xrv":
                router.template = xr

if router.type == "vmx":
                router.template = junos

if router.type == "csr":
                router.template = ios

self.routers.append(router)
            i = i + 1

i = 1
        for link in topology["links"]:
            left = self.routers.get(link["left"]["router"])
            right = self.routers.get(link["right"]["router"])

left.links.append({
                "interface": link["left"]["interface"],
                "numeric": link["left"]["numeric"],
                "id": max(left.id, right.id) + i,
                "octet": 1,
                "remote": {
                    "router": link["right"]["router"],
                    "interface": link["right"]["interface"],
                    "numeric": link["right"]["numeric"]
                }
            })

right.links.append({
                "interface": link["right"]["interface"],
                "numeric": link["right"]["numeric"],
                "id": max(left.id, right.id)+i,
                "octet": 2,
                "remote": {
                    "router": link["left"]["router"],
                    "interface": link["left"]["interface"],
                    "numeric": link["left"]["numeric"]
                }
            })
            i = i + 1

def connect(self):
        for router in self.routers.list():
            router.connect(self.wait_for_boot)

def render_config(self):
        for router in self.routers.list():
            config = {
                "hostname": router.name, 
                "links": router.links, 
                "id": router.id
            }

for key in router.attrs:
                config[key] = router.attrs[key]

env = jinja2.Environment(loader=jinja2.FileSystemLoader(['./']))
            template = env.get_template(router.template)
            router.config = template.render(config)
            router.load_merge()

def apply_config(self):
        for router in self.routers.list():
            router.commit_config()

def diff_config(self):
        for router in self.routers.list():
            print(router.compare_config())
            router.discard_config()

if __name__ == '__main__':
    import argparse
    import os

parser = argparse.ArgumentParser()
    parser.add_argument("--topo", help="Low-level topology file from topomachine")
    parser.add_argument("--xr", help="IOS-XR Template")
    parser.add_argument("--junos", help="JunOS template")
    parser.add_argument("--ios", help="IOS template")
    parser.add_argument("--router", help="Name of your virtual router to configure, don't use together with --topo")
    parser.add_argument("--config", help="Template to apply to your router specified with --router")
    parser.add_argument("--type", help="Type of router specified with --router")
    parser.add_argument("--attr", help="Add extra attribute exposed in your config template", action="append")
    parser.add_argument("--wait-for-boot", help="Retry connection until successful", default=False, action="store_true")
    parser.add_argument("--run", help="Apply configuration", default=False, action="store_true")
    parser.add_argument("--diff", help="Display configuration diff but don't commit", default=False, action="store_true")
    args = parser.parse_args()

cb = ConfigBootstrap(args.wait_for_boot)

if args.topo:
        if args.router:
            print("You sould use either --router or --topo")
            sys.exit(1)

if not os.path.isfile(args.topo):
            print("Topology file doesn't exist")
            sys.exit(1)

if args.xr and not os.path.isfile(args.xr):
            print("IOS-XR template doesn't exist")
            sys.exit(1)

if args.junos and not os.path.isfile(args.junos):
            print("JunOS template doesn't exist")
            sys.exit(1)

if args.ios and not os.path.isfile(args.ios):
            print("IOS template doesn't exist")
            sys.exit(1)

input_file = open(args.topo, "r")
        topology = json.loads(input_file.read())
        input_file.close()

cb.load_topology(topology, args.xr, args.junos, args.ios)
        cb.connect()
        if args.run or args.diff:
            cb.render_config()

if args.run:
            cb.apply_config()

if args.diff:
            cb.diff_config()

if args.router:
        if not args.config or not os.path.isfile(args.config):
            print("Configuration template doesn't exist")
            sys.exit(1)
        if args.type not in [ "vmx", "csr", "xrv"]:
            print("Invalid router type {}".format(args.type))
            sys.exit(1)

attrs = {}
        if args.attr:
            try:
                for entry in args.attr:
                    pcs = entry.split("=")
                    attrs[pcs[0]] = pcs[1]
            except:
                print("Failed to parse extra attributes")
                sys.exit(1)

cb.load_router(args.router, args.type, args.config, attrs)
        cb.connect()

if args.run or args.diff:
            cb.render_config()

if args.run:
            cb.apply_config()

if args.diff:
            cb.diff_config()
07070100000017000041ED00000000000000000000000364A8D17C00000000000000000000000000000000000000000000002300000000vrnetlab-git1688785276.5a42305/csr07070100000018000081A400000000000000000000000164A8D17C0000017B000000000000000000000000000000000000002C00000000vrnetlab-git1688785276.5a42305/csr/MakefileVENDOR=Cisco
NAME=CSR1000v
IMAGE_FORMAT=qcow2
IMAGE_GLOB=*.qcow2

# match versions like:
# csr1000v-universalk9.16.03.01a.qcow2
# csr1000v-universalk9.16.04.01.qcow2
VERSION=$(shell echo $(IMAGE) | sed -e 's/.\+[^0-9]$[0-9]\+\.[0-9]\+\.[0-9]\+[a-z]\?$$[^0-9].*\|$$$/\1/')

-include ../makefile-sanity.include
-include ../makefile.include
-include ../makefile-install.include
07070100000019000081A400000000000000000000000164A8D17C00000F9A000000000000000000000000000000000000002D00000000vrnetlab-git1688785276.5a42305/csr/README.mdvrnetlab / Cisco CSR1000v
===========================
This is the vrnetlab docker image for Cisco CSR1000v.

On installation of CSR1000v the user is presented with the choice of output,
which can be over serial console, a video console or through automatic
detection of one or the other. Empirical studies show that the automatic
detection is far from infallible and so we force the use of the serial console
by feeding the VM an .iso image that contains a small bootstrap configuration
that sets the output to serial console. This means we have to boot up the VM
once to feed it this configuration and then restart it for the changes to take
effect. Naturally we want to do this in the build process as to avoid having to
restart the router once for every time we run the docker image. Unfortunately
docker doesn't allow us to run docker build with `--privileged` so there is no
KVM acceleration making this process excruciatingly slow were it to be
performed in the docker build phase. Instead we build a basic image using
docker build, which essentially just assembles the required files, then run it
with `--privileged` to start up the VM and feed it the .iso image. After we are
done we shut down the VM and commit this new state into the final docker image.
This is unorthodox but works and saves us a lot of time.

Building the docker image
-------------------------
Put the .qcow2 file in this directory and run `make docker-image` and
you should be good to go. The resulting image is called `vr-csr`. You can tag
it with something else if you want, like `my-repo.example.com/vr-csr` and then
push it to your repo. The tag is the same as the version of the CSR image, so
if you have csr1000v-universalk9.16.04.01.qcow2 your final docker image will be called
vr-csr:16.04.01

Please note that you will always need to specify version when starting your
router as the "latest" tag is not added to any images since it has no meaning
in this context.

It's been tested to boot and respond to SSH with:

* 16.03.01a (csr1000v-universalk9.16.03.01a.qcow2)
 * 16.04.01 (csr1000v-universalk9.16.04.01.qcow2)

Usage
-----
```
docker run -d --privileged --name my-csr-router vr-csr
```

Interface mapping
-----------------
IOS XE 16.03.01 and 16.04.01 does only support 10 interfaces, GigabitEthernet1 is always configured
as a management interface and then we can only use 9 interfaces for traffic. If you configure vrnetlab
to use more then 10 the interfaces will be mapped like the table below.

The following images have been verified to NOT exhibit this behavior
- csr1000v-universalk9.03.16.02.S.155-3.S2-ext.qcow2
- csr1000v-universalk9.03.17.02.S.156-1.S2-std.qcow2

| vr-csr | vr-xcon |
| :---:  |  :---:  |
| Gi2    | 10      |
| Gi3    | 1       |
| Gi4    | 2       |
| Gi5    | 3       |
| Gi6    | 4       |
| Gi7    | 5       |
| Gi8    | 6       |
| Gi9    | 7       |
| Gi10   | 8       |
| Gi11   | 9       |

System requirements
-------------------
CPU: 1 core

RAM: 4GB

Disk: <500MB

License handling
----------------
You can feed a license file into CSR1000V by putting a text file containing the
license in this directory next to your .qcow2 image. Name the license file the
same as your .qcow2 file but append ".license", e.g. if you have
"csr1000v-universalk9.16.04.01.qcow2" you would name the license file
"csr1000v-universalk9.16.04.01.qcow2.license".

The license is bound to a specific UDI and usually expires within a given time.
To make sure that everything works out smoothly we configure the clock to
a specific date during the installation process. This is because the license
only has an expiration date not a start date.

The license unlocks feature and throughput, the default throughput
for CSR is 100Kbit/s and is totally useless if you want to configure the device
with a fairly large configuration.

FUAQ - Frequently or Unfrequently Asked Questions
-------------------------------------------------
##### Q: Has this been extensively tested?
A: Nope. 
0707010000001A000041ED00000000000000000000000264A8D17C00000000000000000000000000000000000000000000002A00000000vrnetlab-git1688785276.5a42305/csr/docker0707010000001B000081A400000000000000000000000164A8D17C000001EC000000000000000000000000000000000000003500000000vrnetlab-git1688785276.5a42305/csr/docker/DockerfileFROM debian:bullseye
MAINTAINER Kristian Larsson <kristian@spritelink.net>

ENV DEBIAN_FRONTEND=noninteractive

RUN apt-get update -qy \
 && apt-get upgrade -qy \
 && apt-get install -y \
    bridge-utils \
    iproute2 \
    python3-ipy \
    socat \
    qemu-kvm \
    genisoimage \
 && rm -rf /var/lib/apt/lists/*

ARG VERSION
ENV VERSION=${VERSION}
ARG IMAGE
COPY $IMAGE* /
COPY *.py /

EXPOSE 22 161/udp 830 5000 10000-10099
HEALTHCHECK CMD ["/healthcheck.py"]
ENTRYPOINT ["/launch.py"]
0707010000001C000081ED00000000000000000000000164A8D17C00001B62000000000000000000000000000000000000003400000000vrnetlab-git1688785276.5a42305/csr/docker/launch.py#!/usr/bin/env python3

import datetime
import logging
import os
import re
import signal
import subprocess
import sys
import telnetlib
import time

import vrnetlab

def handle_SIGCHLD(signal, frame):
    os.waitpid(-1, os.WNOHANG)

def handle_SIGTERM(signal, frame):
    sys.exit(0)

signal.signal(signal.SIGINT, handle_SIGTERM)
signal.signal(signal.SIGTERM, handle_SIGTERM)
signal.signal(signal.SIGCHLD, handle_SIGCHLD)

TRACE_LEVEL_NUM = 9
logging.addLevelName(TRACE_LEVEL_NUM, "TRACE")
def trace(self, message, *args, **kws):
    # Yes, logger takes its '*args' as 'args'.
    if self.isEnabledFor(TRACE_LEVEL_NUM):
        self._log(TRACE_LEVEL_NUM, message, args, **kws)
logging.Logger.trace = trace

class CSR_vm(vrnetlab.VM):
    def __init__(self, username, password, install_mode=False):
        for e in os.listdir("/"):
            if re.search(".qcow2$", e):
                disk_image = "/" + e
            if re.search("\.license$", e):
                os.rename("/" + e, "/tftpboot/license.lic")

self.license = False
        if os.path.isfile("/tftpboot/license.lic"):
            logger.info("License found")
            self.license = True

super(CSR_vm, self).__init__(username, password, disk_image=disk_image)
        self.nic_type = "virtio-net-pci"
        self.install_mode = install_mode
        self.num_nics = 9

if self.install_mode:
            logger.trace("install mode")
            self.image_name = "config.iso"
            self.create_boot_image()

self.qemu_args.extend(["-cdrom", "/" +self.image_name])

def create_boot_image(self):
        """ Creates a iso image with a bootstrap configuration
        """

cfg_file = open('/iosxe_config.txt', 'w')
        if self.license:
            cfg_file.write("do clock set 13:33:37 1 Jan 2010\r\n")
            cfg_file.write("interface GigabitEthernet1\r\n")
            cfg_file.write("ip address 10.0.0.15 255.255.255.0\r\n")
            cfg_file.write("no shut\r\n")
            cfg_file.write("exit\r\n")
            cfg_file.write("license accept end user agreement\r\n")
            cfg_file.write("yes\r\n")
            cfg_file.write("do license install tftp://10.0.0.2/license.lic\r\n\r\n")

cfg_file.write("platform console serial\r\n\r\n")
        cfg_file.write("do wr\r\n")
        cfg_file.write("do reload\r\n")
        cfg_file.close()

genisoimage_args = ["genisoimage", "-l", "-o", "/" + self.image_name, "/iosxe_config.txt"]

subprocess.Popen(genisoimage_args)

def bootstrap_spin(self):
        """ This function should be called periodically to do work.
        """

if self.spins > 300:
            # too many spins with no result ->  give up
            self.stop()
            self.start()
            return

(ridx, match, res) = self.tn.expect([b"Press RETURN to get started!"], 1)
        if match: # got a match!
            if ridx == 0: # login
                if self.install_mode:
                    self.wait_write("", wait=None)
                    self.wait_write("", None)
                    self.wait_write("enable", wait=">")
                    self.wait_write("clear platform software vnic-if nvtable")
                    self.wait_write("")
                    self.running = True
                    return

self.logger.debug("matched, Press RETURN to get started.")
                self.wait_write("", wait=None)

# no match, if we saw some output from the router it's probably
        # booting, so let's give it some more time
        if res != b'':
            self.logger.trace("OUTPUT: %s" % res.decode())
            # reset spins if we saw some output
            self.spins = 0

self.spins += 1

return

def bootstrap_config(self):
        """ Do the actual bootstrap config
        """
        self.logger.info("applying bootstrap configuration")

self.wait_write("", None)
        self.wait_write("enable", wait=">")
        self.wait_write("configure terminal", wait=">")

self.wait_write("hostname csr1000v")
        self.wait_write("username %s privilege 15 password %s" % (self.username, self.password))
        if int(self.version.split('.')[0]) >= 16:
           self.wait_write("ip domain name example.com")
        else:
           self.wait_write("ip domain-name example.com")
        self.wait_write("crypto key generate rsa modulus 2048")

self.wait_write("interface GigabitEthernet1")
        self.wait_write("ip address 10.0.0.15 255.255.255.0")
        self.wait_write("no shut")
        self.wait_write("exit")
        self.wait_write("restconf")
        self.wait_write("netconf-yang")

self.wait_write("line vty 0 4")
        self.wait_write("login local")
        self.wait_write("transport input all")
        self.wait_write("end")
        self.wait_write("copy running-config startup-config")
        self.wait_write("\r", None)

class CSR(vrnetlab.VR):
    def __init__(self, username, password):
        super(CSR, self).__init__(username, password)
        self.vms = [ CSR_vm(username, password) ]

class CSR_installer(CSR):
    """ CSR installer
        
        Will start the CSR with a mounted iso to make sure that we get
        console output on serial, not vga.
    """
    def __init__(self, username, password):
        super(CSR, self).__init__(username, password)
        self.vms = [ CSR_vm(username, password, install_mode=True)  ]

def install(self):
        self.logger.info("Installing CSR")
        csr = self.vms[0]
        while not csr.running:
            csr.work()
        time.sleep(30)
        csr.stop()
        self.logger.info("Installation complete")

LOG_FORMAT = "%(asctime)s: %(module)-10s %(levelname)-8s %(message)s"
    logging.basicConfig(format=LOG_FORMAT)
    logger = logging.getLogger()

logger.setLevel(logging.DEBUG)
    if args.trace:
        logger.setLevel(1)

if args.install:
        vr = CSR_installer(args.username, args.password)
        vr.install()
    else:
        vr = CSR(args.username, args.password)
        vr.start()
0707010000001D000081ED00000000000000000000000164A8D17C0000145A000000000000000000000000000000000000002F00000000vrnetlab-git1688785276.5a42305/git-lfs-repo.sh#!/bin/bash

unknown_os ()
{
  echo "Unfortunately, your operating system distribution and version are not supported by this script."
  echo
  echo "You can override the OS detection by setting os= and dist= prior to running this script."
  echo "You can find a list of supported OSes and distributions on our website: https://packagecloud.io/docs#os_distro_version"
  echo
  echo "For example, to force Ubuntu Trusty: os=ubuntu dist=trusty ./script.sh"
  echo
  echo "Please email support@packagecloud.io and let us know if you run into any issues."
  exit 1
}

curl_check ()
{
  echo "Checking for curl..."
  if command -v curl > /dev/null; then
    echo "Detected curl..."
  else
    echo "Installing curl..."
    apt-get install -q -y curl
  fi
}

install_debian_keyring ()
{
  if [ "${os}" = "debian" ]; then
    echo "Installing debian-archive-keyring which is needed for installing "
    echo "apt-transport-https on many Debian systems."
    apt-get install -y debian-archive-keyring &> /dev/null
  fi
}

detect_os ()
{
  if [[ ( -z "${os}" ) && ( -z "${dist}" ) ]]; then
    # some systems dont have lsb-release yet have the lsb_release binary and
    # vice-versa
    if [ -e /etc/lsb-release ]; then
      . /etc/lsb-release

if [ "${ID}" = "raspbian" ]; then
        os=${ID}
        dist=`cut --delimiter='.' -f1 /etc/debian_version`
      else
        os=${DISTRIB_ID}
        dist=${DISTRIB_CODENAME}

if [ -z "$dist" ]; then
          dist=${DISTRIB_RELEASE}
        fi
      fi

elif [ `which lsb_release 2>/dev/null` ]; then
      dist=`lsb_release -c | cut -f2`
      os=`lsb_release -i | cut -f2 | awk '{ print tolower($1) }'`

elif [ -e /etc/debian_version ]; then
      # some Debians have jessie/sid in their /etc/debian_version
      # while others have '6.0.7'
      os=`cat /etc/issue | head -1 | awk '{ print tolower($1) }'`
      if grep -q '/' /etc/debian_version; then
        dist=`cut --delimiter='/' -f1 /etc/debian_version`
      else
        dist=`cut --delimiter='.' -f1 /etc/debian_version`
      fi

else
      unknown_os
    fi
  fi

if [ -z "$dist" ]; then
    unknown_os
  fi

# remove whitespace from OS and dist name
  os="${os// /}"
  dist="${dist// /}"

echo "Detected operating system as $os/$dist."
}

main ()
{
  detect_os
  curl_check

# Need to first run apt-get update so that apt-transport-https can be
  # installed
  echo -n "Running apt-get update... "
  apt-get update &> /dev/null
  echo "done."

# Install the debian-archive-keyring package on debian systems so that
  # apt-transport-https can be installed next
  install_debian_keyring

echo -n "Installing apt-transport-https... "
  apt-get install -y apt-transport-https &> /dev/null
  echo "done."

gpg_key_url="https://packagecloud.io/github/git-lfs/gpgkey"
  apt_config_url="https://packagecloud.io/install/repositories/github/git-lfs/config_file.list?os=${os}&dist=${dist}&source=script"

apt_source_path="/etc/apt/sources.list.d/github_git-lfs.list"

echo -n "Installing $apt_source_path..."

# create an apt config file for this repository
  curl -sSf "${apt_config_url}" > $apt_source_path
  curl_exit_code=$?

if [ "$curl_exit_code" = "22" ]; then
    echo
    echo
    echo -n "Unable to download repo config from: "
    echo "${apt_config_url}"
    echo
    echo "This usually happens if your operating system is not supported by "
    echo "packagecloud.io, or this script's OS detection failed."
    echo
    echo "You can override the OS detection by setting os= and dist= prior to running this script."
    echo "You can find a list of supported OSes and distributions on our website: https://packagecloud.io/docs#os_distro_version"
    echo
    echo "For example, to force Ubuntu Trusty: os=ubuntu dist=trusty ./script.sh"
    echo
    echo "If you are running a supported OS, please email support@packagecloud.io and report this."
    [ -e $apt_source_path ] && rm $apt_source_path
    exit 1
  elif [ "$curl_exit_code" = "35" -o "$curl_exit_code" = "60" ]; then
    echo "curl is unable to connect to packagecloud.io over TLS when running: "
    echo "    curl ${apt_config_url}"
    echo "This is usually due to one of two things:"
    echo
    echo " 1.) Missing CA root certificates (make sure the ca-certificates package is installed)"
    echo " 2.) An old version of libssl. Try upgrading libssl on your system to a more recent version"
    echo
    echo "Contact support@packagecloud.io with information about your system for help."
    [ -e $apt_source_path ] && rm $apt_source_path
    exit 1
  elif [ "$curl_exit_code" -gt "0" ]; then
    echo
    echo "Unable to run: "
    echo "    curl ${apt_config_url}"
    echo
    echo "Double check your curl installation and try again."
    [ -e $apt_source_path ] && rm $apt_source_path
    exit 1
  else
    echo "done."
  fi

echo -n "Importing packagecloud gpg key... "
  # import the gpg key
  curl -L "${gpg_key_url}" 2> /dev/null | apt-key add - &>/dev/null
  echo "done."

echo -n "Running apt-get update... "
  # update apt on this system
  apt-get update &> /dev/null
  echo "done."

echo
  echo "The repository is setup! You can now install packages."
}

main

0707010000001E000081A400000000000000000000000164A8D17C00000C6C000000000000000000000000000000000000003800000000vrnetlab-git1688785276.5a42305/makefile-install.include#
# This Makefile can be included by images that need to run an install phase,
# i.e. in addition to doing the docker build, we also want to run some stuff
# inside that image to come up with the final output image. in the case of
# JUNOS we want to do this as the first time the vMX RE boots up it detects
# that it's in a vMX RE mode and then reboots. By starting it up and letting it
# do this first check-and-reboot during the image build time we save ourselves
# from doing this on *every* run of the container image later.
# 
# Since we start the virtual router we are actually running a virtual machine
# with qemu and for that we want KVM hardware acceleration, which requires
# running docker with --privileged. `docker build` doesn't have the
# --privileged argument, so instead we first run the build as normal up to the
# point where we want to start the virtual router. Then we use `docker run
# --privilged ...` do the needful and after commit it using `docker commit ...`
# to create the final output image.
#
# One of the problems with this is that normally the docker build is kind of
# idempotent in that it uses a command cache and if there are no changes to the
# Dockerfile or input files it will not rerun those commands but use a cached
# image. This greatly speeds up the build process. However, when doing this
# manual `docker run` dance we miss this opportunity since it will always be
# run.... so we worked around it. Before doing docker run we check the SHA sum
# of the built image and compare this to the ones of the previously built
# image. If they are the same it means the docker build was entirely cached and
# there's no need to run the image, otherwise if there's a change we do run it.
# When comparing the hashes we omit the last layer of the previous build. It
# contains the committed changes from the install phase of the previous build.
# Include this makefile to have your image automatically do that dance.

docker-pre-build:
	-cat cidfile | xargs --no-run-if-empty docker rm -f
	-rm cidfile
	-docker tag $(REGISTRY)vr-$(VR_NAME):$(VERSION) $(REGISTRY)vr-$(VR_NAME):$(VERSION)-previous-build

docker-build: docker-build-common
	-docker inspect --format '{{.RootFS.Layers}}' $(REGISTRY)vr-$(VR_NAME):$(VERSION)-previous-build | tr -d '][' | awk '{ $$(NF)=""; print }' > built-image-sha-previous
	docker inspect --format '{{.RootFS.Layers}}' $(REGISTRY)vr-$(VR_NAME):$(VERSION) | tr -d '][' > built-image-sha-current
	if [ "$$(cat built-image-sha-previous | sed -e 's/[[:space:]]*$$//')" = "$$(cat built-image-sha-current)" ]; then echo "Previous image is the same as current, retagging!"; \
	docker tag $(REGISTRY)vr-$(VR_NAME):$(VERSION)-previous-build $(REGISTRY)vr-$(VR_NAME):$(VERSION) || true; \
	else \
	echo "Current build differ from previous, running install!"; \
	docker run --cidfile cidfile --privileged $(REGISTRY)vr-$(VR_NAME):$(VERSION) --trace --install $(EXTRA_INSTALL_ARGS); \
	docker commit --change='ENTRYPOINT ["/launch.py"]' $$(cat cidfile) $(REGISTRY)vr-$(VR_NAME):$(VERSION); \
	docker rm -f $$(cat cidfile); \
	fi
	docker rmi -f $(REGISTRY)vr-$(VR_NAME):$(VERSION)-previous-build || true
	rm built-image-sha*
0707010000001F000081A400000000000000000000000164A8D17C00000172000000000000000000000000000000000000003700000000vrnetlab-git1688785276.5a42305/makefile-sanity.includeifdef DOCKER_REGISTRY
ifneq ($(DOCKER_REGISTRY), $(shell echo $(DOCKER_REGISTRY) | sed -ne '/^[A-Za-z0-9.\/\-]\+$:[0-9]\+$\?$[A-Za-z0-9.\/-]\+$\?$$/p'))
$(error Bad docker registry URL. Should follow format registry.example.com/foo, registry.example.com:1234 or registry.example.com:1234/foo)
endif
    REGISTRY=$(DOCKER_REGISTRY)/
else
    REGISTRY=vrnetlab/
endif
07070100000020000081A400000000000000000000000164A8D17C000009E9000000000000000000000000000000000000003000000000vrnetlab-git1688785276.5a42305/makefile.includeVR_NAME=$(shell basename $$(pwd))
IMAGES=$(shell ls $(IMAGE_GLOB) 2>/dev/null)
NUM_IMAGES=$(shell ls $(IMAGES) | wc -l)

ifeq ($(NUM_IMAGES), 0)
docker-image: no-image usage
else
docker-image:
	for IMAGE in $(IMAGES); do \
		echo "Making $$IMAGE"; \
		$(MAKE) IMAGE=$$IMAGE docker-build; \
	done
endif

docker-clean-build:
	-rm -f docker/*.qcow2* docker/*.tgz* docker/*.vmdk* docker/*.iso

docker-pre-build: ;

docker-build-image-copy:
	cp $(IMAGE)* docker/

TAG_NAME = $(REGISTRY)vr-$(VR_NAME):$(VERSION)

ifeq ($(PNS),)
PNS:=$(shell whoami | sed 's/[^[:alnum:]._-]\+/_/g')
endif

docker-build-common: docker-clean-build docker-pre-build
	@if [ -z "$$IMAGE" ]; then echo "ERROR: No IMAGE specified"; exit 1; fi
	@if [ "$(IMAGE)" = "$(VERSION)" ]; then echo "ERROR: Incorrect version string ($(IMAGE)). The regexp for extracting version information is likely incorrect, check the regexp in the Makefile or open an issue at https://github.com/plajjan/vrnetlab/issues/new including the image file name you are using."; exit 1; fi
	@echo "Building docker image using $(IMAGE) as $(TAG_NAME)"
	cp ../common/* docker/
	$(MAKE) IMAGE=$$IMAGE docker-build-image-copy
	(cd docker; docker build --build-arg http_proxy=$(http_proxy) --build-arg https_proxy=$(https_proxy) --build-arg IMAGE=$(IMAGE) --build-arg VERSION=$(VERSION) -t $(TAG_NAME) .)

docker-build: docker-build-common

docker-push:
	for IMAGE in $(IMAGES); do \
		$(MAKE) IMAGE=$$IMAGE docker-push-image; \
	done

docker-push-image:
	@if [ -z "$$IMAGE" ]; then echo "ERROR: No IMAGE specified"; exit 1; fi
	@if [ "$(IMAGE)" = "$(VERSION)" ]; then echo "ERROR: Incorrect version string"; exit 1; fi
	docker push $(TAG_NAME)

usage:
	@echo "Usage: put the $(VENDOR) $(NAME) $(IMAGE_FORMAT) image in this directory and run:"
	@echo "  make"

no-image:
	@echo "ERROR: you have no $(IMAGE_FORMAT) ($(IMAGE_GLOB)) image"

version-test:
	@echo Extracting version from filename $(IMAGE)
	@echo Version: $(VERSION)

docker-test:
	set -xe; for IMAGE in $(IMAGES); do \
		$(MAKE) IMAGE=$$IMAGE docker-test-image; \
	done

CNT_PREFIX ?= $(PNS)-test-image-$(VR_NAME)
TEST_TIMEOUT ?= 2400

docker-test-image: CONTAINER_NAME?=$(CNT_PREFIX)-$(VERSION)
docker-test-image:
	../test/test-image $(TAG_NAME) $(CONTAINER_NAME) $$TEST_PARAMS

docker-test-clean:
	docker ps -aqf name=$(CNT_PREFIX) | xargs --no-run-if-empty docker rm -f

docker-test-save-logs:
	for cnt in `docker ps -af name=$(CNT_PREFIX) --format '{{.Names}}'`; do \
		docker logs $${cnt} > $${cnt}.log 2>&1; \
	done

all:  docker-image
07070100000021000041ED00000000000000000000000364A8D17C00000000000000000000000000000000000000000000002400000000vrnetlab-git1688785276.5a42305/nxos07070100000022000081A400000000000000000000000164A8D17C00000132000000000000000000000000000000000000002D00000000vrnetlab-git1688785276.5a42305/nxos/MakefileVENDOR=Cisco
NAME=NXOS Titanium
IMAGE_FORMAT=qcow2
IMAGE_GLOB=*.qcow2

# match versions like:
# TODO: add example file names here
VERSION=$(shell echo $(IMAGE) | sed -e 's/.\+[^0-9]$[0-9]\.[0-9]\.[0-9]\.[A-Z][0-9]\.[0-9]$[^0-9].*$$/\1/')

-include ../makefile-sanity.include
-include ../makefile.include
07070100000023000081A400000000000000000000000164A8D17C0000049D000000000000000000000000000000000000002E00000000vrnetlab-git1688785276.5a42305/nxos/README.mdvrnetlab / Cisco Nexus NXOS
===========================
This is the vrnetlab docker image for Cisco Nexus NXOS Titanium emulator.

Building the docker image
-------------------------
Titanium doesn't appear to be exactly official but you can get it from the
Internet. VIRL is said to include it, so you may have luck in extracting it
from there.

Anyway, put the .qcow2 file in this directory and run `make docker-image` and
you should be good to go. The resulting image is called `vr-nxos`. You can tag
it with something else if you want, like `my-repo.example.com/vr-nxos` and then
push it to your repo. The tag is the same as the version of the NXOS image, so
if you have nxosv-7.2.0.D1.1.qcow2 your final docker image will be called
vr-nxos:7.2.0.D1.1

Usage
-----
```
docker run -d --privileged --name my-nxos-router vr-nxos
```

System requirements
-------------------
CPU: 1 core

RAM: 2GB

Disk: <500MB

FUAQ - Frequently or Unfrequently Asked Questions
-------------------------------------------------
##### Q: Has this been extensively tested?
A: Nope. I don't use Nexus myself (yet) so not much testing at all really.
Please do try it out and let me know if it works.
07070100000024000041ED00000000000000000000000264A8D17C00000000000000000000000000000000000000000000002B00000000vrnetlab-git1688785276.5a42305/nxos/docker07070100000025000081A400000000000000000000000164A8D17C000001B7000000000000000000000000000000000000003600000000vrnetlab-git1688785276.5a42305/nxos/docker/DockerfileFROM debian:bullseye
MAINTAINER Kristian Larsson <kristian@spritelink.net>

ENV DEBIAN_FRONTEND=noninteractive

RUN apt-get update -qy \
 && apt-get upgrade -qy \
 && apt-get install -y \
    bridge-utils \
    iproute2 \
    python3-ipy \
    socat \
    qemu-kvm \
 && rm -rf /var/lib/apt/lists/*

ARG IMAGE
COPY $IMAGE* /
COPY *.py /

EXPOSE 22 161/udp 830 5000 10000-10099
HEALTHCHECK CMD ["/healthcheck.py"]
ENTRYPOINT ["/launch.py"]
07070100000026000081ED00000000000000000000000164A8D17C0000101C000000000000000000000000000000000000003500000000vrnetlab-git1688785276.5a42305/nxos/docker/launch.py#!/usr/bin/env python3

import datetime
import logging
import os
import random
import re
import signal
import sys
import telnetlib
import time

import vrnetlab

def handle_SIGCHLD(signal, frame):
    os.waitpid(-1, os.WNOHANG)

def handle_SIGTERM(signal, frame):
    sys.exit(0)

signal.signal(signal.SIGINT, handle_SIGTERM)
signal.signal(signal.SIGTERM, handle_SIGTERM)
signal.signal(signal.SIGCHLD, handle_SIGCHLD)

class NXOS_vm(vrnetlab.VM):
    def __init__(self, username, password):
        for e in os.listdir("/"):
            if re.search(".qcow2$", e):
                disk_image = "/" + e
        super(NXOS_vm, self).__init__(username, password, disk_image=disk_image)
        self.num_nics = 144
        self.credentials = [
                ['admin', 'admin']
            ]

def bootstrap_spin(self):
        """ This function should be called periodically to do work.
        """

if self.spins > 300:
            # too many spins with no result ->  give up
            self.stop()
            self.start()
            return

(ridx, match, res) = self.tn.expect([b"login:"], 1)
        if match: # got a match!
            if ridx == 0: # login
                self.logger.debug("matched login prompt")
                try:
                    username, password = self.credentials.pop(0)
                except IndexError as exc:
                    self.logger.error("no more credentials to try")
                    return
                self.logger.debug("trying to log in with %s / %s" % (username, password))
                self.wait_write(username, wait=None)
                self.wait_write(password, wait="Password:")

self.spins += 1

return

def bootstrap_config(self):
        """ Do the actual bootstrap config
        """
        self.logger.info("applying bootstrap configuration")
        self.wait_write("", None)
        self.wait_write("configure")
        self.wait_write("username %s password 0 %s role network-admin" % (self.username, self.password))

# configure mgmt interface
        self.wait_write("interface mgmt0")
        self.wait_write("ip address 10.0.0.15/24")
        self.wait_write("exit")
        self.wait_write("exit")
        self.wait_write("copy running-config startup-config")

class NXOS(vrnetlab.VR):
    def __init__(self, username, password):
        super(NXOS, self).__init__(username, password)
        self.vms = [ NXOS_vm(username, password) ]

LOG_FORMAT = "%(asctime)s: %(module)-10s %(levelname)-8s %(message)s"
    logging.basicConfig(format=LOG_FORMAT)
    logger = logging.getLogger()

logger.setLevel(logging.DEBUG)
    if args.trace:
        logger.setLevel(1)

vr = NXOS(args.username, args.password)
    vr.start()
07070100000027000041ED00000000000000000000000364A8D17C00000000000000000000000000000000000000000000002700000000vrnetlab-git1688785276.5a42305/nxos9kv07070100000028000081A400000000000000000000000164A8D17C00000152000000000000000000000000000000000000003000000000vrnetlab-git1688785276.5a42305/nxos9kv/MakefileVENDOR=Cisco
NAME=NX-OS 9000v
IMAGE_FORMAT=qcow2
IMAGE_GLOB=*.qcow2

# match versions like:
# nexus9300v.9.3.7.qcow2
VERSION=$(shell echo $(IMAGE) | sed -e 's/.\+[^0-9]$[0-9]\.[0-9]\.[0-9].*$\.qcow2$$/\1/')

-include ../makefile-sanity.include
-include ../makefile.include

docker-pre-build:
	cp OVMF-pure-efi.fd nxos_config.txt docker
07070100000029000081A400000000000000000000000164A8D17C000009A7000000000000000000000000000000000000003100000000vrnetlab-git1688785276.5a42305/nxos9kv/README.mdvrnetlab / Cisco NX-OSv 9000
============================
This is the vrnetlab docker image for Cisco NX-OSv 9000 Virtual Switch.

Building the docker image
-------------------------
This is the officially supported image and is different from the Titanium
emulator. The image can be downloaded directly from Cisco site.

Additional files needed
-----------------------
You need to download the nexus9x00v image from Cisco. You will also need to
download the EFI boot image, such as the one from 
https://www.kraxel.org/repos/jenkins/edk2. You need to extract the 
OVMF-pure-efi.fd file from the RPM package, this EFI boot image is used to
boot up the nexus9x00v image.

Anyway, put the .qcow2 and the fd files in this directory and run 
`make docker-image` and you should be good to go. The resulting image
is called `vr-nxos9k`. You can tag it with something else if you want,
like `my-repo.example.com/vr-nxos9k` and then push it to your repo. The tag
is the same as the version of the NXOS image, so if you have
nexus9300v.9.3.7.qcow2 your final docker image will be called vr-nxos:9.3.7.

Usage
-----
```
docker run -d --privileged --name my-nxos-router vr-nxos9k:9.3.7
```
You may specify the number of NICs with --num-nics, the default is 24 with a
maximum of 65 for 9300v.

Initial Configuration
---------------------
The initial configuration file called nxos_config.txt is required. This file
should contain some minimal configuration. A sample configuration is included.

System requirements
-------------------

Currently there are two platforms, 9300v and 9500v. If you are using vrnetlab
I assume you want the light weight 9300v. The resource requirement is based on
9300v.

CPU: 1 core, 2 prefered, the VR is not stable in my tests with 1 core.

RAM: 8GB, Cisco recommends 4GB, but in my case 4GB is not enough.

Disk: 8GB

I only tested with 9300v.

Known issues
------------
It is known that a previously booted image may not start properly. We have
implemented a check that once a container stops then restarts, all its
configurations (stored in the overlay image) are wiped clean before running.
You will have to configure from scratch for each run.

FUAQ - Frequently or Unfrequently Asked Questions
-------------------------------------------------
##### Q: Has this been extensively tested?
A: Only basic configuration by the author on Ubuntu 20.04 server running Intel
Xeon chips, both CLI and Netconf work. Layer2/layer3 functions are not tested.
0707010000002A000041ED00000000000000000000000264A8D17C00000000000000000000000000000000000000000000002E00000000vrnetlab-git1688785276.5a42305/nxos9kv/docker0707010000002B000081A400000000000000000000000164A8D17C000001B7000000000000000000000000000000000000003900000000vrnetlab-git1688785276.5a42305/nxos9kv/docker/DockerfileFROM debian:bullseye

ENV DEBIAN_FRONTEND=noninteractive

RUN apt-get update -qy \
 && apt-get upgrade -qy \
 && apt-get install -y \
    bridge-utils \
    genisoimage \
    iproute2 \
    python3-ipy \
    socat \
    qemu-kvm \
 && rm -rf /var/lib/apt/lists/*

ARG IMAGE
# binary files
COPY $IMAGE *.fd /
# the rest
COPY *.py *.txt /

EXPOSE 22 161/udp 830 5000 10000-10099
HEALTHCHECK CMD ["/healthcheck.py"]
ENTRYPOINT ["/launch.py"]
0707010000002C000081ED00000000000000000000000164A8D17C00001875000000000000000000000000000000000000003800000000vrnetlab-git1688785276.5a42305/nxos9kv/docker/launch.py#!/usr/bin/env python3

import argparse
import datetime
import logging
import os
import re
import signal
import sys

import vrnetlab

def handle_SIGCHLD(signal, frame):
    os.waitpid(-1, os.WNOHANG)

def handle_SIGTERM(signal, frame):
    sys.exit(0)

signal.signal(signal.SIGINT, handle_SIGTERM)
signal.signal(signal.SIGTERM, handle_SIGTERM)
signal.signal(signal.SIGCHLD, handle_SIGCHLD)

TRACE_LEVEL_NUM = 9
logging.addLevelName(TRACE_LEVEL_NUM, "TRACE")

def trace(self, message, *args, **kws):
    # Yes, logger takes its '*args' as 'args'.
    if self.isEnabledFor(TRACE_LEVEL_NUM):
        self._log(TRACE_LEVEL_NUM, message, args, **kws)

logging.Logger.trace = trace

class NXOS9K_vm(vrnetlab.VM):
    def __init__(self, bios, username, password, num_nics):
        for e in os.listdir("/"):
            if re.search(".qcow2$", e):
                disk_image = "/" + e
        # the parent constructor needs to call create_overlay_image,
        # so must initialize the other parameters first
        self.bios = bios
        self.prompted = False
        super().__init__(username, password, disk_image=disk_image, ram=8192)
        self.num_nics = num_nics
        self.credentials = [
                ['admin', 'Cisco1234']
            ]

def create_overlay_image(self):
        extended_args = ['-nographic', '-bios', self.bios, '-smp', '2']
        # remove previously old overlay image, otherwise boot fails
        if os.path.exists(self.overlay_disk_image):
            os.remove(self.overlay_disk_image)
        # now re-create it!
        super().create_overlay_image()
        # use SATA driver for disk and set to drive 0
        extended_args.extend(['-device', 'ahci,id=ahci0,bus=pci.0',
            '-drive', 'if=none,file=%s,id=drive-sata-disk0,format=qcow2' % self.overlay_disk_image,
            '-device', 'ide-drive,bus=ahci0.0,drive=drive-sata-disk0,id=drive-sata-disk0'])
        # create initial config and load it
        vrnetlab.run_command(['genisoimage', '-o', '/cfg.iso', '-l', '--iso-level', '2', 'nxos_config.txt'])
        extended_args.extend(['-drive', 'file=cfg.iso,media=cdrom'])

return extended_args

def bootstrap_spin(self):
        """ This function should be called periodically to do work.
        """

# press return to get prompt every 10 seconds
        if not self.prompted and self.spins % 10 == 0:
            self.wait_write('', wait=None)
        if self.spins > 300:
            # too many spins with no result ->  give up
            self.prompted = False
            self.stop()
            # re-create overlay image
            self.create_overlay_image()
            self.start()
            return

username, password = self.credentials[0]
        (ridx, match, res) = self.tn.expect([b'login:', b'Enter the password for "admin":', b'Confirm the password for "admin":'], 1)
        if match: # got a match!
            self.prompted = True
            self.logger.info("match found: %s", res.decode())
            if ridx == 0: # login
                self.logger.info("matched login prompt")
                self.logger.info("trying to log in with %s / %s", username, password)
                self.wait_write(username, wait=None)
                self.wait_write(password, wait="Password:")

# run main config!
                self.bootstrap_config()
                # close telnet connection
                self.tn.close()
                # startup time?
                startup_time = datetime.datetime.now() - self.start_time
                self.logger.info("Startup complete in: %s", startup_time)
                # mark as running
                self.running = True
            else:
                self.logger.info("Trying to reset admin password to %s", password)
                self.wait_write(password, wait=None)
                self.wait_write(password, wait='password')

# no match, if we saw some output from the router it's probably
        # booting, so let's give it some more time
        elif res != b'':
            self.logger.trace("OUTPUT: %s", res.decode())
            # reset spins if we saw some output
            self.spins = 0

self.spins += 1

return

def bootstrap_config(self):
        """ Do the actual bootstrap config
        """
        self.logger.info("applying bootstrap configuration")
        self.wait_write("", None)
        # figure out the running image
        self.wait_write("", None)
        self.wait_write("configure")
        self.wait_write("username %s password 0 %s role network-admin" % (self.username, self.password))

# configure mgmt interface
        self.wait_write("interface mgmt0")
        self.wait_write("ip address 10.0.0.15/24")
        self.wait_write("exit")
        # enable netconf with 10 sessions (max allowed)
        self.wait_write("feature netconf")
        self.wait_write("netconf sessions 10")
        self.wait_write("exit")
        self.wait_write("copy running-config startup-config")

class NXOS9K(vrnetlab.VR):
    def __init__(self, bios, username, password, num_nics):
        super().__init__(username, password)
        self.vms = [ NXOS9K_vm(bios, username, password, num_nics) ]

def main():
    """Main method"""
    parser = argparse.ArgumentParser()
    parser.add_argument('--trace', action='store_true', help='enable trace level logging')
    parser.add_argument('--username', default='vrnetlab', help='Username')
    parser.add_argument('--password', default='VR-netlab9', help='Password')
    parser.add_argument('--bios', default='OVMF-pure-efi.fd', help='EFI bios image')
    parser.add_argument('--num-nics', type=int, default=24, help='Number of NICs')
    args = parser.parse_args()

# check if the bios file exists
    if not os.path.exists(args.bios):
        print('Bios file %s does not exit' % args.bios)
        sys.exit(1)

LOG_FORMAT = "%(asctime)s: %(module)-10s %(levelname)-8s %(message)s"
    logging.basicConfig(format=LOG_FORMAT)
    logger = logging.getLogger()

logger.setLevel(logging.DEBUG)
    if args.trace:
        logger.setLevel(1)

vr = NXOS9K(args.bios, args.username, args.password, args.num_nics)
    vr.start()

if __name__ == '__main__':
    main()
0707010000002D000081A400000000000000000000000164A8D17C0000007A000000000000000000000000000000000000003700000000vrnetlab-git1688785276.5a42305/nxos9kv/nxos_config.txthostname nexus-switch
username admin password Cisco1234
interface mgmt0
  vrf member management
  ip address 10.0.0.15/24
0707010000002E000041ED00000000000000000000000364A8D17C00000000000000000000000000000000000000000000002700000000vrnetlab-git1688785276.5a42305/openwrt0707010000002F000081A400000000000000000000000164A8D17C00000236000000000000000000000000000000000000003000000000vrnetlab-git1688785276.5a42305/openwrt/MakefileVENDOR=OpenWRT
NAME=OpenWRT
IMAGE_FORMAT=img
IMAGE_GLOB=*.img

# match versions like:
# openwrt-12.09-x86-kvm_guest-combined-ext4.img
# openwrt-14.07-x86-kvm_guest-combined-ext4.img
# openwrt-15.05.1-x86-kvm_guest-combined-ext4.img
# openwrt-15.05-x86-kvm_guest-combined-ext4.img
VERSION=$(shell echo $(IMAGE) | sed -e 's/openwrt-$[0-9][0-9]\.[0-9][0-9]\(\.[0-9]\+$\?\)-.*/\1/')

-include ../makefile-sanity.include
-include ../makefile.include

download:
	python3 download.py
	for F in `ls *.img.gz`; do gunzip -f $$F; done

build: download
	$(MAKE) docker-image
07070100000030000081A400000000000000000000000164A8D17C00000715000000000000000000000000000000000000003100000000vrnetlab-git1688785276.5a42305/openwrt/README.mdvrnetlab / OpenWRT
==================================
This is the vrnetlab docker image for OpenWRT.

Building the docker image
-------------------------
Run `make build` to automatically download images from the public OpenWRT image
repository and build them into vrnetlab docker images. `build` consists of the
`download` step and `docker-image` step, which can be run separately.

Use `make download` to automatically download images from the public OpenWRT
image repository at https://downloads.openwrt.org. The download script will get
everything that has a two-digit major version, e.g. 12.09, 14.07, 15.05 etc.

You can also download images manually by navigating to
https://downloads.openwrt.org/ and grabbing the file. You have to gunzip it.

Whichever way you get the images, once you have them, run `make docker-image`
to build the docker images. The resulting image is called `vr-openwrt`. You can
tag it with something else if you want, like `my-repo.example.com/vr-openwrt`
and then push it to your repo. The tag is the same as the version of the
OpenWRT image, so if you have openwrt-15.05-x86-kvm_guest-combined-ext4.img
your final docker image will be called vr-openwrt:15.05.

As per OpenWRT defaults, `br-lan`(`eth0`) is the LAN interface and `eth1` the
WAN interface.

Tested booting and responding to SSH:
* openwrt-15.05-x86-kvm_guest-combined-ext4.img   MD5:3d9b51a7e0cd728137318989a9fd35fb

Usage
-----
```
docker run -d --privileged --name openwrt1 vr-openwrt:15.05
```

System requirements
-------------------
CPU: 1 core

RAM: 128 MB

Disk: 256 MB

FAQ - Frequently or Unfrequently Asked Questions
-------------------------------------------------
##### Q: Has this been extensively tested?
A: Nope. It starts and you can connect to it. Take it for a spin and provide
some feedback :-)
07070100000031000041ED00000000000000000000000264A8D17C00000000000000000000000000000000000000000000002E00000000vrnetlab-git1688785276.5a42305/openwrt/docker07070100000032000081A400000000000000000000000164A8D17C000001BA000000000000000000000000000000000000003900000000vrnetlab-git1688785276.5a42305/openwrt/docker/DockerfileFROM debian:bullseye
MAINTAINER Kristian Larsson <kristian@spritelink.net>

ENV DEBIAN_FRONTEND=noninteractive

RUN apt-get update -qy \
 && apt-get upgrade -qy \
 && apt-get install -y \
    bridge-utils \
    iproute2 \
    python3-ipy \
    socat \
    qemu-kvm \
 && rm -rf /var/lib/apt/lists/*

ARG IMAGE
COPY $IMAGE* /
COPY *.py /

EXPOSE 22 161/udp 80 830 5000 10000-10099
HEALTHCHECK CMD ["/healthcheck.py"]
ENTRYPOINT ["/launch.py"]
07070100000033000081ED00000000000000000000000164A8D17C000010DC000000000000000000000000000000000000003800000000vrnetlab-git1688785276.5a42305/openwrt/docker/launch.py#!/usr/bin/env python3

import datetime
import logging
import os
import re
import signal
import sys
import telnetlib

import vrnetlab

def handle_SIGCHLD(signal, frame):
    os.waitpid(-1, os.WNOHANG)

def handle_SIGTERM(signal, frame):
    sys.exit(0)

signal.signal(signal.SIGINT, handle_SIGTERM)
signal.signal(signal.SIGTERM, handle_SIGTERM)
signal.signal(signal.SIGCHLD, handle_SIGCHLD)

class OpenWRT_vm(vrnetlab.VM):
    def __init__(self, username, password):
        for e in os.listdir("/"):
            if re.search(".img$", e):
                disk_image = "/" + e
        super(OpenWRT_vm, self).__init__(username, password, disk_image=disk_image, ram=128)
        self.nic_type = "virtio-net-pci"
        self.num_nics = 1

def bootstrap_spin(self):
        """ This function should be called periodically to do work.
        """

if self.spins > 300:
            # too many spins with no result ->  give up
            self.stop()
            self.start()
            return

(ridx, match, res) = self.tn.expect([b"br-lan"], 1)
        if match: # got a match!
            if ridx == 0: # login
                self.logger.debug("VM started")
                # run main config!
                self.bootstrap_config()
                # close telnet connection
                self.tn.close()
                # startup time?
                startup_time = datetime.datetime.now() - self.start_time
                self.logger.info("Startup complete in: %s" % startup_time)
                # mark as running
                self.running = True
                return

self.spins += 1

return

def bootstrap_config(self):
        """ Do the actual bootstrap config
        """
        self.logger.info("applying bootstrap configuration")
        # Get a prompt
        self.wait_write("\r", None)
        # Configure interface
        self.wait_write("ifconfig br-lan 10.0.0.15 netmask 255.255.255.0", "#")
        # Set root password (ssh login prerequisite)
        self.wait_write("passwd", "#")
        self.wait_write(self.password, "New password:")
        self.wait_write(self.password, "Retype password:")
        # Create vrnetlab user
        self.wait_write("echo '%s:x:501:501:%s:/home/%s:/bin/ash' >> /etc/passwd" %(self.username, self.username, self.username), "#")
        self.wait_write("passwd %s" %(self.username))
        self.wait_write(self.password, "New password:")
        self.wait_write(self.password, "Retype password:")
        # Add user to root group
        self.wait_write("sed -i '1d' /etc/group", "#")
        self.wait_write("sed -i '1i root:x:0:%s' /etc/group" % (self.username))
        # Create home dir
        self.wait_write("mkdir -p /home/%s" %(self.username))
        self.wait_write("chown %s /home/%s" %(self.username, self.username))
        self.logger.info("completed bootstrap configuration")

class OpenWRT(vrnetlab.VR):
    def __init__(self, username, password):
        super(OpenWRT, self).__init__(username, password)
        self.vms = [ OpenWRT_vm(username, password) ]

LOG_FORMAT = "%(asctime)s: %(module)-10s %(levelname)-8s %(message)s"
    logging.basicConfig(format=LOG_FORMAT)
    logger = logging.getLogger()

logger.setLevel(logging.DEBUG)
    if args.trace:
        logger.setLevel(1)

vr = OpenWRT(args.username, args.password)
    vr.start()
07070100000034000081ED00000000000000000000000164A8D17C00000724000000000000000000000000000000000000003300000000vrnetlab-git1688785276.5a42305/openwrt/download.py#!/usr/bin/env python3
import os
import re
import requests
from lxml import html

def get_hrefs(url):
    'Fetch, parse, strip and return [href,href,..]'
    res = requests.get(url)
    if not res.status_code == 200:
        return
    tree = html.fromstring(res.content)
    anchors = tree.xpath('//a[@href]')
    refs = list(map(lambda a: a.get('href').strip('/'), anchors))
    return refs

def get_file(url, save_dest):
    'Fetch, write and return Content-Length'
    with requests.get(url, stream=True) as src:
        with open(save_dest, 'wb') as dest:
            dest.write(src.content)
            dest.close()
        src.close()
        return src.headers.get('Content-Length')

def get_latest(releases):
    'Find the latest NN out of many NN.nn.nn'
    release_matrix = {}
    for rel in releases:
        if not re.match('^\d{2}\.\d{2}\.\d+', rel):
            continue
        major = rel.split('.')[0]
        release_matrix.setdefault(major, '')
        release_matrix[major] = max(release_matrix[major], rel)
    return list(release_matrix.values())

def main():

base_url = "https://downloads.openwrt.org/releases"
    stable_releases = get_hrefs(base_url)
    latest_releases = get_latest(stable_releases)

for release in  latest_releases:

base_x86_64= f'{base_url}/{release}/targets/x86/64'
        for filename in get_hrefs(base_x86_64):
            # ignore if not ext4 fs
            if not re.match('^openwrt-.*-combined-ext4.img.gz', filename) and \
               not re.match('^openwrt-.*-ext4-combined.img.gz', filename):
                continue

remote_file = f'{base_x86_64}/{filename}'
            local_file = os.path.basename(remote_file)
            size = get_file(remote_file, local_file)
            print(f'Downloaded {local_file} ({size} bytes)')

main()
07070100000035000041ED00000000000000000000000364A8D17C00000000000000000000000000000000000000000000002800000000vrnetlab-git1688785276.5a42305/routeros07070100000036000081A400000000000000000000000164A8D17C00000101000000000000000000000000000000000000003100000000vrnetlab-git1688785276.5a42305/routeros/MakefileVENDOR=Mikrotik
NAME=RouterOS
IMAGE_FORMAT=vmdk
IMAGE_GLOB=*.vmdk

# match versions like:
# chr-6.39.2.vmdk
VERSION=$(shell echo $(IMAGE) | sed -n 's/.*$[0-9]\.[0-9][0-99]\.[0-9]$.*/\1/p')

-include ../makefile-sanity.include
-include ../makefile.include
07070100000037000081A400000000000000000000000164A8D17C0000033F000000000000000000000000000000000000003200000000vrnetlab-git1688785276.5a42305/routeros/README.mdvrnetlab / Mikrotik RouterOS (ROS)
==================================
This is the vrnetlab docker image for Mikrotik RouterOS (ROS).

Building the docker image
-------------------------
Download the Cloud Hosted Router VMDK image from https://www.mikrotik.com/download
Copy the vmdk image into this folder, then run `make docker-image`.

Tested booting and responding to SSH:
 * chr-6.39.2.vmdk   MD5:eb99636e3cdbd1ea79551170c68a9a27

Usage
-----
```
docker run -d --privileged --name my-ros-router vr-ros:6.39.2
```

System requirements
-------------------
CPU: 1 core

RAM: <1GB

Disk: <1GB

FAQ - Frequently or Unfrequently Asked Questions
-------------------------------------------------
##### Q: Has this been extensively tested?
A: Nope. It starts and you can connect to it. Take it for a spin and provide
some feedback :-)
07070100000038000041ED00000000000000000000000264A8D17C00000000000000000000000000000000000000000000002F00000000vrnetlab-git1688785276.5a42305/routeros/docker07070100000039000081A400000000000000000000000164A8D17C000001B7000000000000000000000000000000000000003A00000000vrnetlab-git1688785276.5a42305/routeros/docker/DockerfileFROM debian:bullseye
MAINTAINER Kristian Larsson <kristian@spritelink.net>

ENV DEBIAN_FRONTEND=noninteractive

RUN apt-get update -qy \
 && apt-get upgrade -qy \
 && apt-get install -y \
    bridge-utils \
    iproute2 \
    python3-ipy \
    socat \
    qemu-kvm \
 && rm -rf /var/lib/apt/lists/*

ARG IMAGE
COPY $IMAGE* /
COPY *.py /

EXPOSE 22 161/udp 830 5000 10000-10099
HEALTHCHECK CMD ["/healthcheck.py"]
ENTRYPOINT ["/launch.py"]
0707010000003A000081ED00000000000000000000000164A8D17C00000F92000000000000000000000000000000000000003900000000vrnetlab-git1688785276.5a42305/routeros/docker/launch.py#!/usr/bin/env python3

import datetime
import logging
import os
import re
import signal
import sys
import telnetlib

import vrnetlab

def handle_SIGCHLD(signal, frame):
    os.waitpid(-1, os.WNOHANG)

def handle_SIGTERM(signal, frame):
    sys.exit(0)

signal.signal(signal.SIGINT, handle_SIGTERM)
signal.signal(signal.SIGTERM, handle_SIGTERM)
signal.signal(signal.SIGCHLD, handle_SIGCHLD)

class ROS_vm(vrnetlab.VM):
    def __init__(self, username, password):
        for e in os.listdir("/"):
            if re.search(".vmdk$", e):
                disk_image = "/" + e
        super(ROS_vm, self).__init__(username, password, disk_image=disk_image, ram=256)
        self.qemu_args.extend(["-boot", "n"])

self.num_nics = 31

def bootstrap_spin(self):
        """ This function should be called periodically to do work.
        """

if self.spins > 300:
            # too many spins with no result ->  give up
            self.stop()
            self.start()
            return

(ridx, match, res) = self.tn.expect([b"MikroTik Login"], 1)
        if match: # got a match!
            if ridx == 0: # login
                self.logger.debug("VM started")

# Login
                self.wait_write("\r", None)
                # Append +ct to username for the plain-text console version
                self.wait_write("admin+ct", wait="MikroTik Login: ")
                self.wait_write("", wait="Password: ")
                self.wait_write("n", wait="Do you want to see the software license? [Y/n]: ")

self.logger.debug("Login completed")

self.spins += 1

return

def bootstrap_config(self):
        """ Do the actual bootstrap config
        """
        self.logger.info("applying bootstrap configuration")
        self.wait_write("/ip address add interface=ether1 address=10.0.0.15 netmask=255.255.255.0", "[admin@MikroTik] > ")
        self.wait_write("/user add name=%s password=\"%s\" group=full" % (self.username, self.password), "[admin@MikroTik] > ")
        self.wait_write("\r", "[admin@MikroTik] > ")
        self.logger.info("completed bootstrap configuration")

class ROS(vrnetlab.VR):
    def __init__(self, username, password):
        super(ROS, self).__init__(username, password)
        self.vms = [ ROS_vm(username, password) ]

LOG_FORMAT = "%(asctime)s: %(module)-10s %(levelname)-8s %(message)s"
    logging.basicConfig(format=LOG_FORMAT)
    logger = logging.getLogger()

logger.setLevel(logging.DEBUG)
    if args.trace:
        logger.setLevel(1)

vr = ROS(args.username, args.password)
    vr.start()
0707010000003B000041ED00000000000000000000000364A8D17C00000000000000000000000000000000000000000000002400000000vrnetlab-git1688785276.5a42305/sros0707010000003C000081A400000000000000000000000164A8D17C000001DD000000000000000000000000000000000000002D00000000vrnetlab-git1688785276.5a42305/sros/MakefileVENDOR=Nokia
NAME=VSR
IMAGE_FORMAT=qcow2
IMAGE_GLOB=*.qcow2

# match versions like:
# sros-vm-13.0.R7.qcow2
# sros-vm-14.0.R4.qcow2
# sros-vm-14.0.R7.qcow2
# sros-vm-15.0.R1.qcow2
# sros-vm-16.0.B0.qcow2 (pre-GA / beta image for 16, which is named completely differently when coming from Nokia)
VERSION=$(shell echo $(IMAGE) | sed -e 's/.\+[^0-9]$[0-9]\+\.[0-9]\+\.[A-Z][0-9]\+\(-[0-9]\+$\?\)[^0-9].*$$/\1/')

-include ../makefile-sanity.include
-include ../makefile.include
0707010000003D000081A400000000000000000000000164A8D17C0000124E000000000000000000000000000000000000002E00000000vrnetlab-git1688785276.5a42305/sros/README.mdvrnetlab / Nokia VSR SROS
=========================
This is the vrnetlab docker image for Nokia VSR / SROS.

Ask your Nokia representative for the VSR image.  Put the sros.qcow2 file in
this directory and run `make docker-image` and you should be good to go. The
resulting image is called `vr-sros`. You can tag it with something else if you
want, like `my-repo.example.com/vr-sros` and then push it to your repo.

Please note that you will always need to specify version when starting your
router as the "latest" tag is not added to any images since it has no meaning
in this context.

It's been tested to at least boot with:

* 12.0.R6
 * 13.0.R7
 * 14.0.R4
 * 14.0.R5
 * 16.0.R1
 * 16.0.R2
 * 16.0.R2-1
 * 16.0.R3
 * 16.0.R3-1
 * 16.0.R4
 * 16.0.R4-1

Usage
-----
The container must be `--privileged` to start KVM.
```
docker run -d --privileged --name my-sros-router vr-sros
```
It takes about 90 seconds for the virtual router to start and after this we can
login over SSH / NETCONF with the specified credentials.

You can specify how many ports the virtual router should have through the
`--num-nics` argument. With 5 or fewer ports the router will be started in what
is called "integrated" mode which means it's a single VM. The router will then
be equipped with a m5-1gb-sfp-b MDA. The VSR release notes claim that up to 8
interfaces can be used but I have never gotten more than 5 to work (even when
using a different MDA).

If more than 5 ports are specified with the `--num-nics` argument the router
will be started in what is known as "distributed" mode which means multiple VMs
are used. The first VM is the control plane while remaining are "line cards".
Again, the release notes state that 8 ports can be used per VM but I have not
been able to get link up on more than 6 interface per line card VM. Thus, the
number of line card VM started is dependent upon the number of ports specified
through `--num-nics`. `--num-nics 6` means one line card VM (and one control
plane VM) is started whereas `--num-nics 15` would yield three line card VMs
(3x6=18 ports). In distributed mode the router is simulating an XRS-20. Each
line card is equipped with one cx20-10g-sfp MDA (XMA really). Note how each VM,
both control plane and line card, consume 6GB of RAM each.

The ports follow the pattern X/1/[1..6] where X is the line card slot. For an
integrated VM the slot is always 1 whereas for distributed mode there can be
many line card slots.

If you want to look at the startup process you can specify `-i -t` to docker
run and you'll get an interactive terminal, do note that docker will terminate
as soon as you close it though. Use `-d` for long running routers.

License handling
----------------
You can feed a license file into SROS by putting a text file containing the
license in this directory next to your .qcow2 image.  Name the license file the
same as your .qcow2 file but append ".license", e.g. if you have
"sros-14.0.R3.qcow2" you would name the license file
"sros-14.0.R3.qcow2.license".

The license is bound to a specific UUID and usually expires within a given
time. The UUID is the first part of the license file and the launch script will
automatically extract this and start the VSR with this UUID.

If you have a time limited license you can put the start time of the license in
the license file simply by appending the date in ISO-8601 format (YYYY-mm-dd).
The license usually has a '# BLA BLA TiMOS-XX.Y.*' at the end to signify what
it is for, simply append the date there. The launch script will extract this
date and start the VSR with this date + 1 day as to fool the licensing system.
I suppose that you shouldn't configure NTP or similar on your VSR....

FUAQ - Frequently or Unfrequently Asked Questions
-------------------------------------------------
##### Q: I can't run any useful commands, like "configure", what up?
A: Are you perhaps using release 14? Nokia introduced more limitations on the
VSR when run without license. Apparently it wasn't enough to restart once an
hour and have severe rate-limiting (250pps per interface) but they also limited
the commands you can run, including "configure", which makes the VSR with SROS
14 and later completely useless without a license.

##### Q: How many interfaces are available?
A: Many! You can specify the number of ports you want with the `--num-nics`
argument. If you specify more than 5 the router will be started in
"distributed" mode which means multiple line cards (VMs) are used.

##### Q: Why 6GB of RAM? It says only 4GB is required.
A: SROS 16 seems to require 6GB and we don't build with different amount of
CPU/RAM per versions so that's why every version gets the same.
0707010000003E000041ED00000000000000000000000264A8D17C00000000000000000000000000000000000000000000002B00000000vrnetlab-git1688785276.5a42305/sros/docker0707010000003F000081A400000000000000000000000164A8D17C000001B7000000000000000000000000000000000000003600000000vrnetlab-git1688785276.5a42305/sros/docker/DockerfileFROM debian:bullseye
MAINTAINER Kristian Larsson <kristian@spritelink.net>

ENV DEBIAN_FRONTEND=noninteractive

RUN apt-get update -qy \
 && apt-get upgrade -qy \
 && apt-get install -y \
    bridge-utils \
    iproute2 \
    python3-ipy \
    socat \
    qemu-kvm \
 && rm -rf /var/lib/apt/lists/*

ARG IMAGE
COPY $IMAGE* /
COPY *.py /

EXPOSE 22 161/udp 830 5000 10000-10099
HEALTHCHECK CMD ["/healthcheck.py"]
ENTRYPOINT ["/launch.py"]
07070100000040000081ED00000000000000000000000164A8D17C00000153000000000000000000000000000000000000003A00000000vrnetlab-git1688785276.5a42305/sros/docker/healthcheck.py#!/usr/bin/env python3

import sys

try:
    health_file = open("/health", "r")
    health = health_file.read()
    health_file.close()
except FileNotFoundError:
    print("health status file not found")
    sys.exit(2)

exit_status, message = health.strip().split(" ", 1)

if message != '':
    print(message)

sys.exit(int(exit_status))
07070100000041000081ED00000000000000000000000164A8D17C00003C4A000000000000000000000000000000000000003500000000vrnetlab-git1688785276.5a42305/sros/docker/launch.py#!/usr/bin/env python3

import datetime
import logging
import math
import os
import re
import signal
import sys

import vrnetlab

def handle_SIGCHLD(signal, frame):
    os.waitpid(-1, os.WNOHANG)

def handle_SIGTERM(signal, frame):
    sys.exit(0)

signal.signal(signal.SIGINT, handle_SIGTERM)
signal.signal(signal.SIGTERM, handle_SIGTERM)
signal.signal(signal.SIGCHLD, handle_SIGCHLD)

def mangle_uuid(uuid):
    """ Mangle the UUID to fix endianness mismatch on first part
    """
    parts = uuid.split("-")

new_parts = [
        uuid_rev_part(parts[0]),
        uuid_rev_part(parts[1]),
        uuid_rev_part(parts[2]),
        parts[3],
        parts[4]
    ]

return '-'.join(new_parts)

def uuid_rev_part(part):
    """ Reverse part of a UUID
    """
    res = ""
    for i in reversed(range(0, len(part), 2)):
        res += part[i]
        res += part[i+1]
    return res

# Add gNMI ports
vrnetlab.HOST_FWDS.append(('tcp', 9339, 57400))
vrnetlab.HOST_FWDS.append(('tcp', 57400, 57400))

class SROS_vm(vrnetlab.VM):
    def __init__(self, username, password, num=0):
        super(SROS_vm, self).__init__(username, password, disk_image = "/sros.qcow2", num=num, ram=6144)

self.uuid = "00000000-0000-0000-0000-000000000000"
        self.read_license()

def bootstrap_spin(self):
        """ This function should be called periodically to do work.
        """

if self.spins > 60:
            # too many spins with no result, probably means SROS hasn't started
            # successfully, so we restart it
            self.logger.warning("no output from serial console, restarting VM")
            self.stop()
            self.start()
            self.spins = 0
            return

(ridx, match, res) = self.tn.expect([b"Login:", b"^[^ ]+#"], 1)
        if match: # got a match!
            if ridx == 0: # matched login prompt, so should login
                self.logger.debug("matched login prompt")
                self.wait_write("admin", wait=None)
                self.wait_write("admin", wait="Password:")
            # run main config!
            self.bootstrap_config()
            # close telnet connection
            self.tn.close()
            # calc startup time
            startup_time = datetime.datetime.now() - self.start_time
            self.logger.info("Startup complete in: %s" % startup_time)
            self.running = True
            return

self.spins += 1

return

def read_license(self):
        """ Read the license file, if it exists, and extract the UUID and start
            time of the license
        """
        if not os.path.isfile("/tftpboot/license.txt"):
            self.logger.info("No license file found")
            return

lic_file = open("/tftpboot/license.txt", "r")
        license = ""
        for line in lic_file.readlines():
            # ignore comments in license file
            if line.startswith('#'):
                continue
            license += line
        lic_file.close()
        try:
            uuid_input = license.split(" ")[0]
            self.uuid = mangle_uuid(uuid_input)
            self.uuid = uuid_input
            m = re.search("([0-9]{4}-[0-9]{2}-)([0-9]{2})", license)
            if m:
                self.fake_start_date = "%s%02d" % (m.group(1), int(m.group(2))+1)
        except:
            raise ValueError("Unable to parse license file")
        self.logger.info("License file found for UUID %s with start date %s" % (self.uuid, self.fake_start_date))

class SROS_integrated(SROS_vm):
    """ Integrated VSR-SIM
    """
    def __init__(self, username, password, mode):
        super(SROS_integrated, self).__init__(username, password)
        self.mode = mode
        self.num_nics = 5
        self.smbios = ["type=1,product=TIMOS:address=10.0.0.15/24@active license-file=tftp://10.0.0.2/license.txt slot=A chassis=SR-c12 card=cfm-xp-b mda/1=m20-1gb-xp-sfp"]

def gen_mgmt(self):
        """ Generate mgmt interface(s)

We override the default function since we want a fake NIC in there
        """
        # call parent function to generate first mgmt interface (e1000)
        res = super(SROS_integrated, self).gen_mgmt()
        # add virtio NIC for internal control plane interface to vFPC
        res.append("-device")
        res.append("e1000,netdev=dummy0,mac=%s" % vrnetlab.gen_mac(1))
        res.append("-netdev")
        res.append("tap,ifname=dummy0,id=dummy0,script=no,downscript=no")
        return res

def bootstrap_config(self):
        """ Do the actual bootstrap config
        """
        if self.username and self.password:
            self.wait_write("configure system security user \"%s\" password %s" % (self.username, self.password))
            self.wait_write("configure system security user \"%s\" access console netconf grpc" % (self.username))
            self.wait_write("configure system security user \"%s\" console member \"administrative\" \"default\"" % (self.username))
        self.wait_write("configure system netconf no shutdown")
        self.wait_write("configure system grpc allow-unsecure-connection")
        self.wait_write("configure system grpc no shutdown")
        self.wait_write("configure system security profile \"administrative\" netconf base-op-authorization lock")
        self.wait_write("configure system login-control ssh inbound-max-sessions 30")
        self.wait_write("configure card 1 mda 1 shutdown")
        self.wait_write("configure card 1 mda 1 no mda-type")
        self.wait_write("configure card 1 shutdown")
        self.wait_write("configure card 1 no card-type")
        self.wait_write("configure card 1 card-type iom-xp-b")
        self.wait_write("configure card 1 mcm 1 mcm-type mcm-xp")
        self.wait_write("configure card 1 mda 1 mda-type m20-1gb-xp-sfp")
        self.wait_write("configure card 1 no shutdown")
        if self.mode != 'cli':
            self.wait_write("configure system management-interface yang-modules no nokia-modules")
            self.wait_write("configure system management-interface yang-modules nokia-combined-modules")
            self.wait_write("configure system management-interface yang-modules no base-r13-modules")
            self.wait_write("configure system management-interface configuration-mode {}".format(self.mode))
        self.wait_write("admin save")
        self.wait_write("logout")

class SROS_cp(SROS_vm):
    """ Control plane for distributed VSR-SIM
    """
    def __init__(self, username, password, mode, major_release, num_lc=1):
        super(SROS_cp, self).__init__(username, password)
        self.num_lc = num_lc
        self.mode = mode
        self.num_nics = 0
        if major_release >= 19:
            self.logger.info("SROS release 19 or higher, use card xcm-x20 instead of cpm-x20")
            self.smbios = ["type=1,product=TIMOS:address=10.0.0.15/24@active license-file=tftp://10.0.0.2/license.txt chassis=XRS-20 chassis-topology=XRS-40 slot=A sfm=sfm-x20-b card=xcm-x20"]
        else:
            self.smbios = ["type=1,product=TIMOS:address=10.0.0.15/24@active license-file=tftp://10.0.0.2/license.txt chassis=XRS-20 chassis-topology=XRS-40 slot=A sfm=sfm-x20-b card=cpm-x20"]

def start(self):
        # use parent class start() function
        super(SROS_cp, self).start()
        # add interface to internal control plane bridge
        vrnetlab.run_command(["brctl", "addif", "int_cp", "vcp-int"])
        vrnetlab.run_command(["ip", "link", "set", "vcp-int", "up"])
        vrnetlab.run_command(["ip", "link", "set", "dev", "vcp-int", "mtu", "10000"])

def gen_mgmt(self):
        """ Generate mgmt interface(s)

We override the default function since we want a NIC to the vFPC
        """
        # call parent function to generate first mgmt interface (e1000)
        res = super(SROS_cp, self).gen_mgmt()
        # add virtio NIC for internal control plane interface to vFPC
        res.append("-device")
        res.append("e1000,netdev=vcp-int,mac=%s" % vrnetlab.gen_mac(1))
        res.append("-netdev")
        res.append("tap,ifname=vcp-int,id=vcp-int,script=no,downscript=no")
        return res

# configure SFMs
        for i in range(1, 17):
            self.wait_write("configure sfm {} sfm-type sfm-x20-b".format(i))

# configure line card & MDAs
        for i in range(1, self.num_lc+1):
            self.wait_write("configure card {} card-type xcm-x20".format(i))
            self.wait_write("configure card {} mda 1 mda-type cx20-10g-sfp".format(i))

if self.mode != 'cli':
            self.wait_write("configure system management-interface yang-modules no nokia-modules")
            self.wait_write("configure system management-interface yang-modules nokia-combined-modules")
            self.wait_write("configure system management-interface yang-modules no base-r13-modules")
            self.wait_write("configure system management-interface configuration-mode {}".format(self.mode))
        self.wait_write("admin save")
        self.wait_write("logout")

class SROS_lc(SROS_vm):
    """ Line card for distributed VSR-SIM
    """
    def __init__(self, slot=1):
        super(SROS_lc, self).__init__(None, None, num=slot)
        self.slot = slot

self.num_nics = 6
        self.smbios = ["type=1,product=TIMOS:chassis=XRS-20 chassis-topology=XRS-40 slot={} sfm=sfm-x20-b card=xcm-x20 mda/1=cx20-10g-sfp".format(slot)]

def start(self):
        # use parent class start() function
        super(SROS_lc, self).start()
        # add interface to internal control plane bridge
        vrnetlab.run_command(["brctl", "addif", "int_cp", "vfpc{}-int".format(self.slot)])
        vrnetlab.run_command(["ip", "link", "set", "vfpc{}-int".format(self.slot), "up"])
        vrnetlab.run_command(["ip", "link", "set", "dev", "vfpc{}-int".format(self.slot), "mtu", "10000"])

def gen_mgmt(self):
        """ Generate mgmt interface
        """
        res = []
        # mgmt interface
        res.extend(["-device", "e1000,netdev=mgmt,mac=%s" % vrnetlab.gen_mac(0)])
        res.extend(["-netdev", "user,id=mgmt,net=10.0.0.0/24"])
        # internal control plane interface to vFPC
        res.extend(["-device", "e1000,netdev=vfpc-int,mac=%s" %
                    vrnetlab.gen_mac(0)])
        res.extend(["-netdev",
                    "tap,ifname=vfpc{}-int,id=vfpc-int,script=no,downscript=no".format(self.slot)])
        return res

def gen_nics(self):
        """ Generate qemu args for the normal traffic carrying interface(s)
        """
        res = []
        # TODO: should this offset business be put in the common vrnetlab?
        offset = 6 * (self.slot-1)
        for j in range(0, self.num_nics):
            i = offset + j + 1
            res.append("-device")
            res.append(self.nic_type + ",netdev=p%(i)02d,mac=%(mac)s"
                       % { 'i': i, 'mac': vrnetlab.gen_mac(i) })
            res.append("-netdev")
            res.append("socket,id=p%(i)02d,listen=:100%(i)02d"
                       % { 'i': i })
        return res

def bootstrap_spin(self):
        """ We have nothing to do for VSR-SIM line cards
        """
        self.running = True
        self.tn.close()
        return

class SROS(vrnetlab.VR):
    def __init__(self, username, password, num_nics, mode):
        super(SROS, self).__init__(username, password)

major_release = 0

# move files into place
        for e in os.listdir("/"):
            match = re.match(r'[^0-9]+([0-9]+)\S+\.qcow2$', e)
            if match:
                major_release = int(match.group(1))
            if re.search("\.qcow2$", e):
                os.rename("/" + e, "/sros.qcow2")
            if re.search("\.license$", e):
                os.rename("/" + e, "/tftpboot/license.txt")

self.license = False
        if os.path.isfile("/tftpboot/license.txt"):
            self.logger.info("License found")
            self.license = True

self.logger.info("Number of NICS: " + str(num_nics))
        self.logger.info("Mode: " + str(mode))
        # if we have more than 5 NICs or version is 19 or higher we use distributed VSR-SIM
        if num_nics > 5 or major_release >= 19:
            if not self.license:
                self.logger.error("More than 5 NICs require distributed VSR which requires a license but no license is found")
                sys.exit(1)

num_lc = math.ceil(num_nics / 6)
            self.logger.info("Number of linecards: " + str(num_lc))
            self.vms = [ SROS_cp(username, password, mode, major_release, num_lc=num_lc) ]
            for i in range(1, num_lc+1):
                self.vms.append(SROS_lc(i))

else: # 5 ports or less means integrated VSR-SIM
            self.vms = [ SROS_integrated(username, password, mode) ]

# set up bridge for connecting CP with LCs
        vrnetlab.run_command(["brctl", "addbr", "int_cp"])
        vrnetlab.run_command(["ip", "link", "set", "int_cp", "up"])

if __name__ == '__main__':
    import argparse
    parser = argparse.ArgumentParser(description='')
    parser.add_argument('--trace', action='store_true', help='enable trace level logging')
    parser.add_argument('--username', default='vrnetlab', help='Username')
    parser.add_argument('--password', default='VR-netlab9', help='Password')
    parser.add_argument('--num-nics', default=5, help='Number of NICs')
    parser.add_argument('--mode', choices=['cli', 'mixed', 'model-driven'], help='configuration mode of the system', default='cli')
    args = parser.parse_args()

LOG_FORMAT = "%(asctime)s: %(module)-10s %(levelname)-8s %(message)s"
    logging.basicConfig(format=LOG_FORMAT)
    logger = logging.getLogger()

logger.setLevel(logging.DEBUG)
    if args.trace:
        logger.setLevel(1)

ia = SROS(args.username, args.password, num_nics=int(args.num_nics), mode=args.mode)
    ia.start()
07070100000042000041ED00000000000000000000000264A8D17C00000000000000000000000000000000000000000000002400000000vrnetlab-git1688785276.5a42305/test07070100000043000081ED00000000000000000000000164A8D17C00000557000000000000000000000000000000000000002F00000000vrnetlab-git1688785276.5a42305/test/test-image#!/bin/bash

timeout=1200
pull=false
while getopts "t:hp" opt;
do
  case $opt in
    t)
      timeout=$OPTARG
      ;;
    p)
      pull=true
      ;;
    h)
      echo "Usage:"
      echo "$0 [-t timeout] image-name container-name [options for container]"
      echo "\t\t timeout: wait for timeout seconds, default 900"
      exit 0
      ;;
  esac
done

shift $((OPTIND-1))
image=$1
name=$2
shift 2
#echo $@
if [ "${pull}" == "true" ]; then docker pull $image; fi

# clean up any old instances

docker rm -f $name > /dev/null 2>&1

set -e
docker run -d --privileged --name $name $image --trace $@
SECONDS=0
last_uptime=0
echo "Waiting for $name to become healthy"
set +e
while [ $SECONDS -lt $timeout -a "$health" != "healthy" -a "$status" != "exited" ]
do
  sleep 2
  echo -n "."
  health=$(docker inspect --format '{{.State.Health.Status}}' $name)
  if [ $? -ne 0 ]; then exit 1; fi
  if [ $(( SECONDS - last_uptime )) -ge 120 ]
  then
    echo "$name is $health after $SECONDS seconds"
    last_uptime=$SECONDS
  fi
  status=$(docker inspect --format '{{.State.Status}}' $name)
done

echo "\n"
if [ $health = "healthy" ]
then
  echo -e "\e[32m$name became healthy in $SECONDS seconds\e[0m"
  docker stop $name
else
  echo -e "\e[31m$name failed to become healthy after $SECONDS seconds\e[0m"
  # leave the container running for local troubleshooting
  false
fi
07070100000044000041ED00000000000000000000000264A8D17C00000000000000000000000000000000000000000000003000000000vrnetlab-git1688785276.5a42305/topology-machine07070100000045000081A400000000000000000000000164A8D17C000002B5000000000000000000000000000000000000003B00000000vrnetlab-git1688785276.5a42305/topology-machine/DockerfileFROM debian:bullseye
MAINTAINER Kristian Larsson <kristian@spritelink.net>

ENV DEBIAN_FRONTEND=noninteractive

RUN apt-get update -qy \
 && apt-get upgrade -qy \
 && apt-get install -y \
    python3-jinja2 \
    python3-yaml \
    apt-transport-https \
    ca-certificates \
    curl \
    gnupg2 \
    software-properties-common \
 && curl -fsSL https://download.docker.com/linux/debian/gpg | apt-key add - \
 && add-apt-repository \
   "deb [arch=amd64] https://download.docker.com/linux/debian \
   $(lsb_release -cs) \
   stable" \
 && apt-get update -qy \
 && apt-get -y install docker-ce \
 && rm -rf /var/lib/apt/lists/*

ADD topomachine /
ADD *example* /

ENTRYPOINT ["/topomachine"]
07070100000046000081A400000000000000000000000164A8D17C000000D2000000000000000000000000000000000000003900000000vrnetlab-git1688785276.5a42305/topology-machine/Makefile-include ../makefile-sanity.include

all:
	docker build --build-arg http_proxy=$(http_proxy) --build-arg https_proxy=$(https_proxy) -t $(REGISTRY)topomachine .

docker-push:
	docker push $(REGISTRY)topomachine
07070100000047000081A400000000000000000000000164A8D17C000023D8000000000000000000000000000000000000003A00000000vrnetlab-git1688785276.5a42305/topology-machine/README.mdvrnetlab topology machine
=========================
The topology machine will help you manage a topology of virtual routers.

In particular, there are two activites related to building a topology that can
be really tedious and topology machine is meant to help you with these:

* building a full-mesh
 * assigning interfaces to point-to-point links between routers

Full-meshes defined in the configuration file will be expanded into
point-to-point links between all the member routers.

Each point-to-point link needs to have an interface assigned on the routers on
the respective ends of the link. Once you have more than a handful of links it
can become really tedious to sort out what goes where and any additions or
deletions to your topology means instant headache... which is where topo
machine comes in.

You write a high level topology definition which topology machine can convert
into a low level topology definition through --build:
```
topo --build hltopo.json > lltopo.json
```
The output is printed to stdout so you can view it, pipe or redirect to a file
if you want. You only need to run the build the low level topology from the
high level topology once. All subsequent use of --run, --template or similar
uses that one resulting low level topology. Naturally, if you update the high
level topology you must rerun the --build topology to update the low level
topology.

topomachine does not currently use any information from the low level topology
(produced during a previous --build operation) which means that removing a link
will very likely result in changes to the majority of links in the topology as
they will be re-assigned to new interfaces.

topology machine is able to run the machines for you, i.e. execute docker run
for the routers defined in the configuration file and start vr-xcon with the
relevant arguments to complete the topology:
```
topo --run lltopo.json
```
which will then start the docker containers based on the computed topology.
There's a --dry-run option if you just want to see what commands would be
executed. If you want to run multiple topologies at the same time you can
specify a prefix for the docker container names using `--prefix` which prevents
collisions if you use the same name for the virtual routers in the different
topology configurations. Note how

Last but not least, there is a template mode which you can use to produce
configuration for your mangement system, which in turn is provisioning the
routers. Since the provisioned configuration of the virtual routers needs to
align with the "physical" topology built by vr-xcon it makes sense to let
topology machine assist you in producing this service config.

Use `--template` to produce output based on the provided topology information
and template:
```
topo --template lltopo.json my-template.template
```
Output is printed to stdout which can redirected to a file. Jinja2 is used as
the templating language. See example-template.template for how a config to a
network provisioning system can be produced. It has the notion of a
"base-config" applies common configuration to a device and the
"backbone-interface" service which configures an interface on a router for
backbone use.

Configuration file format
-------------------------
Feed it a config file in JSON format. There are three parts of the
configuration file:

* routers
 * p2p
 * fullmeshes

All of which are demonstrated in the accompanying example-topology.json file.

Configuration section "routers"
-------------------------------
The routers section is a declaration of the routers in your topology. You need
to fill in the type and version, which should match up with the vrnetlab
routers you have available, e.g. if you have vr-xrv:5.3.3 you fill in type
"xrv" and version "5.3.3". It's important for topo builder to know about the
router type as it will later map interface to interface names like
GigabitEthernet0/0/0/0 or ge-0/0/0 depending on router type.

```
{
	"routers": {
		"a-pe-router-1": { "type": "xrv", "version": "5.3.3" }
	}
}
```

Any other keys filled in will be transparently passed through topology machine,
which can be very useful for adding extra information for use with the
`--template` option.

Configuration section "p2p"
---------------------------
"p2p" is the second section in the config file and you can use this to define
point-to-point links. Each entry is keyed by the left side of the link followed
by an array of the routers to add a link to.

NOTE: The ends of each link are referred to as "left" and "right". There's no
real importance in the naming - we just needed to call each end something.

For example:

```
{
	"p2p": {
		"foo": [ "a", "b", "c" ]
	}
}
```

The above config will generate three links:

* foo <-> a
 * foo <-> b
 * foo <-> c

It's also possible to add multiple links to the same router simply by adding a
router twice:

```
{
	"p2p": {
		"foo": [ "a", "a" ]
	}
}
```

* foo <-> a
 * foo <-> a

Configuration section "fullmeshes"
----------------------------------
Last but not least we have the fullmeshes section which helps you build one or
more fullmeshes. Name your fullmesh something and list the members:

```
{
	"fullmeshes": {
		"sweden": [ "gothenburg", "stockholm", "malmo" ]
	}
}
```
Note how it's possible to create multiple full-meshes:
```
{
	"fullmeshes": {
		"sweden": [ "gothenburg", "stockholm", "malmo" ],
		"germany": [ "frankfurt", "berlin", "hamburg" ]
	}
}
```

Build as a docker container
---------------------------
You can build topomachine as a docker container for easy distribution.

```
$ cd topology-machine
$ make
```

And you should now have a docker container named topomachine

Use docker container
--------------------
The topomachine docker container can be used to generate the low level topology 
(--build), to generate the docker run commands (--dry-run), to start the 
topology (--run), and to generate custom output using a jinja2 template 
(--template).

For example:

generate the low level topology:
```
$ docker run -t -v $(pwd):/data topomachine --build /data/example-hltopo.json > example-lltopo.json
```

generate the docker run commands:
```
$ docker run -v $(pwd):/data topomachine --run /data/example-lltopo.json --dry-run
The following commands would be executed:
docker run --privileged -d --name ams-core-1 vr-xrv:5.1.1.54U
docker run --privileged -d --name ams-core-2 vr-xrv:5.1.1.54U
docker run --privileged -d --name ams-edge-1 vr-xrv:5.1.1.54U
docker run --privileged -d --name fra-core-1 vr-vmx:16.1R1.7
docker run --privileged -d --name fra-core-2 vr-vmx:16.1R1.7
docker run --privileged -d --name fra-edge-1 vr-vmx:16.1R1.7
docker run --privileged -d --name kul-core-1 vr-xrv:5.1.1.54U
docker run --privileged -d --name par-core-1 vr-sros:13.0.B1-4281
docker run --privileged -d --name par-core-2 vr-sros:13.0.B1-4281
docker run --privileged -d --name par-edge-1 vr-sros:13.0.B1-4281
docker run --privileged -d --name png-edge-1 vr-xrv:5.1.1.54U
docker run --privileged -d --name sgp-core-1 vr-xrv:5.1.1.54U
docker run --privileged -d --name vr-xcon --link ams-core-1:ams-core-1 --link ams-core-2:ams-core-2 --link ams-edge-1:ams-edge-1 --link fra-core-1:fra-core-1 --link fra-core-2:fra-core-2 --link fra-edge-1:fra-edge-1 --link kul-core-1:kul-core-1 --link par-core-1:par-core-1 --link par-core-2:par-core-2 --link par-edge-1:par-edge-1 --link png-edge-1:png-edge-1 --link sgp-core-1:sgp-core-1 vr-xcon --p2p ams-edge-1/1--ams-core-1/1 ams-edge-1/2--ams-core-2/1 fra-core-2/1--sgp-core-1/1 fra-core-2/2--kul-core-1/1 fra-edge-1/1--fra-core-1/1 fra-edge-1/2--fra-core-2/3 par-core-1/1--sgp-core-1/2 par-core-1/2--kul-core-1/2 par-edge-1/1--par-core-1/3 par-edge-1/2--par-core-2/1 png-edge-1/1--sgp-core-1/3 png-edge-1/2--kul-core-1/3 kul-core-1/4--sgp-core-1/4 ams-core-1/2--ams-core-2/2 ams-core-1/3--fra-core-1/2 ams-core-1/4--fra-core-2/4 ams-core-1/5--par-core-1/4 ams-core-1/6--par-core-2/2 ams-core-2/3--fra-core-1/3 ams-core-2/4--fra-core-2/5 ams-core-2/5--par-core-1/5 ams-core-2/6--par-core-2/3 fra-core-1/4--fra-core-2/6 fra-core-1/5--par-core-1/6 fra-core-1/6--par-core-2/4 fra-core-2/7--par-core-1/7 fra-core-2/8--par-core-2/5 par-core-1/8--par-core-2/6
```

start the topology:
```
$ docker run -v $(pwd):/data -v /var/run/docker.sock:/var/run/docker.sock topomachine --run /data/example-lltopo.json
```

generate custom output using a jinja2 template:
```
$ docker run -t -v $(pwd):/data topomachine --template /data/example-lltopo.json /data/example.template
infrastructure {
    base-config fra-edge-1 {
        numeric-id 101;
		ipv4-address 10.0.0.101;
		ipv6-address 2001:db8::101;
    }
    base-config fra-core-2 {
        numeric-id 4;
		ipv4-address 10.0.0.4;
		ipv6-address 2001:db8::4;
    }
...
    backbone-interface par-core-1 2/1/2 {
        ipv4-address 10.1.1.1/30;
        ipv6-address 2001:db8::1:1:1/126;
        remote {
            neighbor par-core-2;
            interface 1/1/6;
        }
    }
    backbone-interface par-core-2 1/1/6 {
        ipv4-address 10.1.1.2/30;
        ipv6-address 2001:db8::1:1:2/126;
        remote {
            neighbor par-core-1;
            interface 2/1/2;
        }
    }
}
```
07070100000048000081A400000000000000000000000164A8D17C0000056E000000000000000000000000000000000000004400000000vrnetlab-git1688785276.5a42305/topology-machine/example-hltopo.json{
	"routers": {
		"ams-core-1": { "id": 1, "type": "xrv", "version": "5.1.1.54U" },
		"ams-core-2": { "id": 2, "type": "xrv", "version": "5.1.1.54U" },
		"fra-core-1": { "id": 3, "type": "vmx", "version": "16.1R1.7" },
		"fra-core-2": { "id": 4, "type": "vmx", "version": "16.1R1.7" },
		"par-core-1": { "id": 5, "type": "sros", "version": "13.0.B1-4281" },
		"par-core-2": { "id": 6, "type": "sros", "version": "13.0.B1-4281" },
		"sgp-core-1": { "id": 7, "type": "xrv", "version": "5.1.1.54U" },
		"kul-core-1": { "id": 8, "type": "xrv", "version": "5.1.1.54U" },
		"ams-edge-1": { "id": 100, "type": "xrv", "version": "5.1.1.54U" },
		"fra-edge-1": { "id": 101, "type": "vmx", "version": "16.1R1.7" },
		"par-edge-1": { "id": 102, "type": "sros", "version": "13.0.B1-4281" },
		"png-edge-1": { "id": 103, "type": "xrv", "version": "5.1.1.54U" }
	},
	"p2p": {
		"fra-core-2": [ "sgp-core-1", "kul-core-1" ],
		"par-core-1": [ "sgp-core-1", "kul-core-1" ],
		"ams-edge-1": [ "ams-core-1", "ams-core-2" ],
		"fra-edge-1": [ "fra-core-1", "fra-core-2" ],
		"par-edge-1": [ "par-core-1", "par-core-2" ],
		"png-edge-1": [ "sgp-core-1", "kul-core-1" ]
	},
	"fullmeshes": {
		"europe": [ "ams-core-1", "ams-core-2", "fra-core-1", "fra-core-2", "par-core-1", "par-core-2" ],
		"asia": [ "sgp-core-1", "kul-core-1" ]
	},
	"hubs": {
		"ams-mgmt": [ "ams-core-1", "ams-core-2", "ams-edge-1" ]
	}
}
07070100000049000081A400000000000000000000000164A8D17C00000383000000000000000000000000000000000000004100000000vrnetlab-git1688785276.5a42305/topology-machine/example.templateinfrastructure {
{%- for router, val in config.routers.items() %}
    base-config {{router}} {
        numeric-id {{val.id}};
		ipv4-address 10.0.0.{{val.id}};
		ipv6-address 2001:db8::{{val.id}};
    }
{%- endfor %}
{%- for link in config.links %}
    backbone-interface {{link.left.router}} {{link.left.interface}} {
        ipv4-address 10.1.{{link.left.router[-1]}}.1/30;
        ipv6-address 2001:db8::1:{{link.left.router[-1]}}:1/126;
        remote {
            neighbor {{link.right.router}};
            interface {{link.right.interface}};
        }
    }
    backbone-interface {{link.right.router}} {{link.right.interface}} {
        ipv4-address 10.1.{{link.left.router[-1]}}.2/30;
        ipv6-address 2001:db8::1:{{link.left.router[-1]}}:2/126;
        remote {
            neighbor {{link.left.router}};
            interface {{link.left.interface}};
        }
    }
{%- endfor %}
}
0707010000004A000081ED00000000000000000000000164A8D17C0000318D000000000000000000000000000000000000003C00000000vrnetlab-git1688785276.5a42305/topology-machine/topomachine#!/usr/bin/env python3

import json
import os
import sys
from collections import OrderedDict

import jinja2

class VrTopo:
    """ vrnetlab topo builder
    """
    def __init__(self, config):
        self.routers = {}
        self.links = []
        self.fullmeshes = {}
        self.hubs = {}
        if 'routers' in config:
            self.routers = config['routers']

# sanity checking - use a YANG model and pyang to validate input?
        for r, val in self.routers.items():
            if 'type' not in val:
                raise ValueError("'type' is not defined for router %s" % r)
            if val['type'] not in ('dummy', 'xcon', 'bgp', 'xrv', 'xrv9k', 'vmx', 'sros', 'csr', 'nxos', 'nxos9kv', 'vqfx', 'vrp', 'veos', 'openwrt'):
                raise ValueError("Unknown type %s for router %s" % (val['type'], r))

# expand p2p links
        links = []
        if 'p2p' in config:
            for router in sorted(config['p2p']):
                neighbors = config['p2p'][router]
                for neighbor in neighbors:
                    links.append({ 'left': { 'router': router }, 'right': {
                        'router': neighbor }})

# expand fullmesh into links
        if 'fullmeshes' in config:
            for name in sorted(config['fullmeshes']):
                val = config['fullmeshes'][name]
                fmlinks = self.expand_fullmesh(val)
                links.extend(fmlinks)

self.links = self.assign_interfaces(links)

self.links_by_nodes = OrderedDict()
        for l in self.links:
            for (link, a, b) in ((l, 'left', 'right'), (l, 'right', 'left')):
                if link[a]['router'] not in self.links_by_nodes:
                    self.links_by_nodes[link[a]['router']] = OrderedDict()
                spec = {'our_interface': link[a]['interface'],
                        'their_interface': link[b]['interface'],
                        'our_numeric': link[a]['numeric'],
                        'their_numeric': link[b]['numeric']}
                if link[b]['router'] not in self.links_by_nodes[link[a]['router']]:
                    self.links_by_nodes[link[a]['router']][link[b]['router']] = []
                self.links_by_nodes[link[a]['router']][link[b]['router']].append(spec)

if 'hubs' in config:
            for hub in sorted(config['hubs']):
                self.hubs[hub] = []
                for router in config['hubs'][hub]:
                    ep = {
                        'router': router,
                        'numeric': self.get_interface(router)
                    }
                    ep['interface'] = self.intf_num_to_name(router, ep['numeric'])
                    self.hubs[hub].append(ep)

for router in sorted(self.routers):
            val = self.routers[router]
            if 'interfaces' in val:
                for num_id in val['interfaces']:
                    val['interfaces'][num_id] = self.intf_num_to_name(router, num_id)

def expand_fullmesh(self, routers):
        """ Flatten a full-mesh into a list of links

Links are considered bi-directional, so you will only see a link A->B
            and not a B->A.
        """
        pairs = {}
        for a in sorted(routers):
            for b in sorted(routers):
                left = min(a, b)
                right = max(a, b)

if left == right: # don't create link to ourself
                    continue

if left not in pairs:
                    pairs[left] = {}
                pairs[left][right] = 1

links = []
        for a in sorted(pairs):
            for b in sorted(pairs[a]):
                links.append({'left': { 'router': a }, 'right': { 'router': b }})

return links

def assign_interfaces(self, links):
        """ Assign numeric interfaces to links
        """
        # assign interfaces to links
        for link in links:
            left = link['left']
            left['numeric'] = self.get_interface(left['router'])
            left['interface'] = self.intf_num_to_name(left['router'], left['numeric'])

right = link['right']
            right['numeric'] = self.get_interface(right['router'])
            right['interface'] = self.intf_num_to_name(right['router'], right['numeric'])

return links

def intf_num_to_name(self, router, interface):
        """ Map numeric ID to interface name
        """
        r = self.routers[router]
        if r['type'] == 'xrv' or r['type'] == 'xrv9k':
            return "GigabitEthernet0/0/0/%d" % (interface-1)
        if r['type'] == 'nxos9kv' or r['type'] == 'nxos':
            return "Ethernet1/%d" % (interface)
        elif r['type'] == 'vmx':
            return "ge-0/0/%d" % (interface-1)
        elif r['type'] == 'sros':
            return "{}/1/{}".format(1+int((interface-1)/6), 1+(interface-1)%6)
        elif r['type'] == 'bgp':
            return "tap%d" % (interface-1)
        elif r['type'] == 'csr':
            return "GigabitEthernet%d" % (interface+1)
        elif r['type'] == 'vqfx':
            return "xe-0/0/%d" % (interface-1)
        elif r['type'] == 'vrp':
            return "GigabitEthernet4/0/%d" % (interface)
        elif r['type'] == 'veos':
            return "Ethernet%d" % (interface)
        elif r['type'] == 'openwrt':
            return "eth%d" % (interface)

return None

def get_interface(self, router):
        """ Return next available interface
        """
        if router not in self.routers:
            raise ValueError("Router %s is not defined in config" % router)
        if 'interfaces' not in self.routers[router]:
            self.routers[router]['interfaces'] = {}
        intfs = self.routers[router]['interfaces']

i = 1
        for intf in range(len(intfs)):
            if i not in intfs:
                break
            i += 1

intfs[i] = None

return i

def output(self, output_format='json'):
        """ Output the resulting topology in given format

output_format can only be json for now
        """
        output = {
                'routers': self.routers,
                'links': self.links,
                'links_by_nodes': self.links_by_nodes,
                'hubs': self.hubs
            }

if output_format == 'json':
            return json.dumps(output, sort_keys=True, indent=4)
        else:
            raise ValueError("Invalid output format")

def run_command(cmd, dry_run=False):
    if dry_run:
        print(" ".join(cmd))
        return

import subprocess
    p = subprocess.Popen(cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE, universal_newlines=True)
    return p.communicate()

def run_topology(config, dry_run, with_trace=False):
    if 'routers' not in config:
        print("No routers in config")
        sys.exit(1)

trace = ''
    if with_trace:
        trace = '--trace'

docker_networks = list(set([r['docker_network'] for r in config['routers'].values() if 'docker_network' in r]))
    if len(docker_networks) > 1:
        print("At most 1 docker network allowed")
        sys.exit(1)
    try:
        docker_network = docker_networks[0]
        run_command(["docker", "network", "create", docker_network, "||", "true"], dry_run)
    except IndexError:
        docker_network = None

docker_registry = ""
    if os.getenv("DOCKER_REGISTRY"):
        docker_registry = os.getenv("DOCKER_REGISTRY") + "/"
    else:
        docker_registry = 'vrnetlab/'

for router in sorted(config['routers']):
        val = config['routers'][router]
        if val["type"] == "dummy":
            continue

name = "%s%s" % (args.prefix, router)
        cmd = ["docker", "run", "--privileged", "-d",
               "--name", name
        ]
        if 'docker_network' in val:
            cmd.append('--network ' + val['docker_network'])
            cmd.append('--network-alias ' + router)
        if 'ip' in val:
            cmd.append('--ip {}'.format(val['ip']))

cmd.append("%svr-%s:%s" % (docker_registry, val["type"], val["version"]))
        if trace:
            cmd.append(trace)
        if 'run_args' in val:
            cmd.extend(val["run_args"].split())

output,_ = run_command(["docker", "inspect", "--format", "{{.State.Running}}", name])
        if not dry_run and output.strip() == "true":
            output,_ = run_command(["docker", "inspect", "--format", "{{.State.Health.Status}}", name])
            print("Container already running. Health: %s" % output.strip())
        else:
            run_command(cmd, dry_run)

if 'links' in config:
        name = "%svr-xcon" % args.prefix
        cmd = ["docker", "run", "--rm", "--privileged", "-d", "--name", name]

if docker_network:
            cmd.extend(["--network", docker_network])
        else:
            for vr in sorted(config['routers']):
                cmd.extend(["--link", "%s%s:%s%s" % (args.prefix, vr, args.prefix, vr)])
        cmd.append(docker_registry + "vr-xcon")
        cmd.append("--p2p")
        cmd.extend(["%s%s/%s--%s%s/%s" % (args.prefix, link["left"]["router"],
                                           link["left"]["numeric"],
                                           args.prefix,
                                           link["right"]["router"],
                                           link["right"]["numeric"]) for link in config['links']])
        output,_ = run_command(["docker", "inspect", "--format", "{{.State.Running}}", name])
        if not dry_run and output.strip() == "true":
            output,_ = run_command(["docker", "inspect", "--format", "{{.State.Health.Status}}", name])
            print("Container already running. Health: %s" % output.strip())
        else:
            run_command(cmd, dry_run)

if 'hubs' in config:
        for hub, eps in config['hubs'].items():
            name = "{}vr-xcon-hub-{}".format(args.prefix, hub)
            cmd = ["docker", "run", "--privileged", "-d", "--name", name]

if __name__ == '__main__':
    import argparse
    parser = argparse.ArgumentParser()
    parser.add_argument("--build", help="Build topology from config")
    parser.add_argument("--run", help="Run topology")
    parser.add_argument("--dry-run", action="store_true", default=False, help="Only print what would be performed during --run")
    parser.add_argument("--prefix", default='', help="docker container name prefix")
    parser.add_argument("--template", nargs=2, help="produce output based on topology information and a template")
    parser.add_argument("--variable", action='append', help="store variables")
    parser.add_argument("--with-trace", action='store_true', help="run virtual routers with --trace")
    args = parser.parse_args()

if args.dry_run and not args.run:
        print("ERROR: --dry-run is only relevant with --run")
        sys.exit(1)

if args.prefix and not args.run:
        print("ERROR: --prefix is only relevant with --run")
        sys.exit(1)

if args.build:
        input_file = open(args.build, "r")
        config = json.loads(input_file.read(), object_pairs_hook=OrderedDict)
        input_file.close()
        try:
            vt = VrTopo(config)
        except Exception as exc:
            print("ERROR:", exc)
            sys.exit(1)
        print(vt.output())

if args.run:
        input_file = open(args.run, "r")
        config = json.loads(input_file.read(), object_pairs_hook=OrderedDict)
        input_file.close()
        if args.dry_run:
            print("The following commands would be executed:")
        run_topology(config, args.dry_run, args.with_trace)

if args.template:
        input_file = open(args.template[0], "r")
        config = json.loads(input_file.read(), object_pairs_hook=OrderedDict)
        input_file.close()

import sys
        vs = {}
        if args.variable:
            for var in args.variable:
                key,value = var.split("=", 2)
                vs[key] = value

env = jinja2.Environment(loader=jinja2.FileSystemLoader(['./']))
        template = env.get_template(args.template[1])
        print(template.render(config=config, vars=vs))

0707010000004B000041ED00000000000000000000000364A8D17C00000000000000000000000000000000000000000000002400000000vrnetlab-git1688785276.5a42305/veos0707010000004C000081A400000000000000000000000164A8D17C000001BE000000000000000000000000000000000000002D00000000vrnetlab-git1688785276.5a42305/veos/MakefileVENDOR=Arista
NAME=vEOS
IMAGE_FORMAT=vmdk
IMAGE_GLOB=vEOS-lab*.vmdk

# match versions like:
# vEOS-lab-4.16.6M.vmdk
# vEOS-lab-4.16.14M.vmdk
# vEOS-lab-4.17.1.1F.vmdk
# vEOS-lab-4.17.1F.vmdk
# vEOS-lab-4.20.0-EFT2.vmdk
VERSION=$(shell echo $(IMAGE) | sed -e 's/.*-$[0-9]\.\([0-9]\+\.$\{1,2\}[0-9]\{1,2\}$[A-Z]\|\-EFT[0-9]$\)\.vmdk$$/\1/')

-include ../makefile-sanity.include
-include ../makefile.include

docker-pre-build:
	cp *.iso docker/
0707010000004D000081A400000000000000000000000164A8D17C0000072B000000000000000000000000000000000000002E00000000vrnetlab-git1688785276.5a42305/veos/README.mdvrnetlab / Arista vEOS
======================
This is the vrnetlab docker image for Arista vEOS.

Building the docker image
-------------------------
Download vEOS in vmdk format and the Aboot file from 
https://www.arista.com/en/support/software-download
Make sure you grab the Aboot file with 'serial' in the name, like
Aboot-veos-serial-8.0.0.iso. You should get the vmdk filed starting with
vEOS-lab-... do not use the "-combined" image, as it combines a vmdk with the
Aboot without serial support. Place both the Aboot iso and the .vmdk file in
this directory and run make. The resulting images is called `vr-veos`. You can
tag it with something else if you want, like `my-repo.example.com/vr-veos` and
then push it to your repo. The tag is the same as the version of the vEOS
image, so if you have vEOS-lab-4.16.6M.vmdk your final docker image will be
called vr-veos:4.16.6M

Please note that you will always need to specify version when starting your
router as the "latest" tag is not added to any images since it has no meaning
in this context.

It's been tested to boot, respond to SSH and have correct interface mapping
with the following images:

* vEOS-lab-4.16.6M.vmdk  MD5:b3f7b7cee17f2e66bb38b453a4939fef

It defaults to 144 NICs (3x48 port line cards).

Usage
-----
```
docker run -d --privileged --name my-veos-router vr-veos
```

Starting vEOS can easily take more than 10 minutes to start; be patient.

You can use --trace on the docker image to see boot output.

System requirements
-------------------
CPU: 1 core

RAM: 2GB

Disk: <1GB

FUAQ - Frequently or Unfrequently Asked Questions
-------------------------------------------------
##### Q: Has this been extensively tested?
A: Nope. I don't use Arista gear myself (yet) so not much testing at all
really.  Please do try it out and let me know if it works.
0707010000004E000041ED00000000000000000000000264A8D17C00000000000000000000000000000000000000000000002B00000000vrnetlab-git1688785276.5a42305/veos/docker0707010000004F000081A400000000000000000000000164A8D17C000001CB000000000000000000000000000000000000003600000000vrnetlab-git1688785276.5a42305/veos/docker/DockerfileFROM debian:bullseye
MAINTAINER Kristian Larsson <kristian@spritelink.net>

ENV DEBIAN_FRONTEND=noninteractive

RUN apt-get update -qy \
 && apt-get upgrade -qy \
 && apt-get install -y \
    bridge-utils \
    iproute2 \
    python3-ipy \
    socat \
    qemu-kvm \
 && rm -rf /var/lib/apt/lists/*

ARG IMAGE
COPY $IMAGE* /
COPY *.iso /
COPY *.py /

EXPOSE 22 161/udp 80 443 830 5000 10000-10099
HEALTHCHECK CMD ["/healthcheck.py"]
ENTRYPOINT ["/launch.py"]
07070100000050000081ED00000000000000000000000164A8D17C00001077000000000000000000000000000000000000003500000000vrnetlab-git1688785276.5a42305/veos/docker/launch.py#!/usr/bin/env python3

import datetime
import logging
import os
import random
import re
import signal
import sys
import telnetlib
import time

import vrnetlab

def handle_SIGCHLD(signal, frame):
    os.waitpid(-1, os.WNOHANG)

def handle_SIGTERM(signal, frame):
    sys.exit(0)

signal.signal(signal.SIGINT, handle_SIGTERM)
signal.signal(signal.SIGTERM, handle_SIGTERM)
signal.signal(signal.SIGCHLD, handle_SIGCHLD)

class VEOS_vm(vrnetlab.VM):
    def __init__(self, username, password):
        for e in os.listdir("/"):
            if re.search(".vmdk$", e):
                disk_image = "/" + e
        for e in os.listdir("/"):
            if re.search(".iso$", e):
                boot_iso = "/" + e
        super(VEOS_vm, self).__init__(username, password, disk_image=disk_image, ram=2048)
        self.num_nics = 20
        self.qemu_args.extend(["-cdrom", boot_iso, "-boot", "d"])

def bootstrap_spin(self):
        """ This function should be called periodically to do work.
        """

if self.spins > 300:
            # too many spins with no result ->  give up
            self.logger.info("To many spins with no result, restarting")
            self.stop()
            self.start()
            return

(ridx, match, res) = self.tn.expect([b"login:"], 1)
        if match: # got a match!
            if ridx == 0: # login
                self.logger.debug("matched login prompt")
                self.logger.debug("trying to log in with 'admin'")
                self.wait_write("admin", wait=None)

self.spins += 1

return

def bootstrap_config(self):
        """ Do the actual bootstrap config
        """
        self.logger.info("applying bootstrap configuration")
        self.wait_write("", None)
        self.wait_write("enable", ">")
        self.wait_write("configure")
        self.wait_write("username %s secret 0 %s role network-admin" % (self.username, self.password))

# configure mgmt interface
        self.wait_write("interface Management 1")
        self.wait_write("ip address 10.0.0.15/24")
        self.wait_write("exit")
        self.wait_write("management api http-commands")
        self.wait_write("protocol unix-socket")
        self.wait_write("no shutdown")
        self.wait_write("exit")
        self.wait_write("exit")
        self.wait_write("copy running-config startup-config")

class VEOS(vrnetlab.VR):
    def __init__(self, username, password):
        super(VEOS, self).__init__(username, password)
        self.vms = [ VEOS_vm(username, password) ]

LOG_FORMAT = "%(asctime)s: %(module)-10s %(levelname)-8s %(message)s"
    logging.basicConfig(format=LOG_FORMAT)
    logger = logging.getLogger()

logger.setLevel(logging.DEBUG)
    if args.trace:
        logger.setLevel(1)

vr = VEOS(args.username, args.password)
    vr.start()
07070100000051000041ED00000000000000000000000364A8D17C00000000000000000000000000000000000000000000002300000000vrnetlab-git1688785276.5a42305/vmx07070100000052000081A400000000000000000000000164A8D17C00000263000000000000000000000000000000000000002C00000000vrnetlab-git1688785276.5a42305/vmx/MakefileVENDOR=Juniper
NAME=vMX
IMAGE_FORMAT=tgz
IMAGE_GLOB=*.tgz

# match versions like:
# vmx-14.1R6.4.tgz
# vmx-15.1F4.15.tgz
# vmx-bundle-15.1F6.9.tgz
# vmx-bundle-16.1R1.7.tgz
# vmx-bundle-16.1R2.11.tgz
# vmx-bundle-17.1R1.8.tgz
# vmx-bundle-16.1R4-S2.2.tgz
# vmx-bundle-17.1R1-S1.tgz
VERSION=$(shell echo $(IMAGE) | sed -e 's/.\+[^0-9]$[0-9][0-9]\.[0-9][A-Z][0-9]\+\(\.[0-9]\+\|-[SD][0-9]\+\(\.[0-9]\+$\?\)\)[^0-9].*$$/\1/')

EXTRA_INSTALL_ARGS=--dual-re

-include ../makefile-sanity.include
-include ../makefile.include
-include ../makefile-install.include

docker-build-image-copy:
	./vmx-extract.sh $(IMAGE)
07070100000053000081A400000000000000000000000164A8D17C0000196A000000000000000000000000000000000000002D00000000vrnetlab-git1688785276.5a42305/vmx/README.mdvrnetlab / Juniper vMX
========================
This is the vrnetlab docker image for Juniper vMX.

Building the docker image
-------------------------
Download vMX from http://www.juniper.net/support/downloads/?p=vmx#sw
Put the .tgz file in this directory and run `make` and you should be good to
go. The resulting image is called `vr-vmx`. During the build it is normal to
receive some error messages about files that do not exist, like;

mv: cannot stat '/tmp/vmx*/images/jinstall64-vmx*img': No such file or directory
    mv: cannot stat '/tmp/vmx*/images/vPFE-lite-*.img': No such file or directory

This is because different versions of JUNOS use different filenames.

The build of vMX is excruciatingly slow, often taking 10-20 minutes. This is
because the first time the VCP (control plane) starts up, it reads a config
file that controls whether it should run as a VRR of VCP in a vMX.  Previously
this start was performed during docker run but it meant that the VCP would
always restart once before the virtual router became available, thus leading to
long bootup times (like 5 minutes). This first start of the VCP is now done
during the build of the docker image and as docker build can't be run with
--privileged it means that qemu is running without hardware KVM acceleration
and thus taking a very long time. You will get a lot of trace output during
this process so at least you can see what's going on. I think it's worth the
longer build time since we build images few times but run them many.

The router can run in standalone mode (single routing engine) or redundant mode
(dual routing engines). This is controller with a runtime configuration options
`--dual-re`. At build time, we build the VCP machines for both modes of
operation: a standalone RE (files in `/vmx/re`) and dual RE (files in
`/vmx/re{0,1}`). At runtime the VCP(s) are started from the correct
directories.

The bootstrap configuration is provided to the device via a "config-drive".
During the install phase, the file `juniper.conf` is used to populate the
metadata-usb image that is attached to the device.

If you want, you can tag the resulting docker image with something else, like
`my-repo.example.com/vr-vmx` and then push it to your repo.  The tag is the
same as the version of the JUNOS image, so if you have vmx-15.1F4.15.tgz your
final docker image will be called vr-vmx:15.1F4.15.

Please note that you will always need to specify version when starting your
router as the "latest" tag is not added to any images since it has no meaning
in this context.

It's been tested to boot, respond to SSH and have correct interface mapping
with the following images:

* vmx-14.1R6.4.tgz  MD5:49d37693fc4c5971fe99703149b39776
 * vmx-15.1F4.15.tgz  MD5:86c28d89d6db5497521ebbb2c7de4472
 * vmx-bundle-15.1F6.9.tgz  MD5:eb128cffde6ab29fdb27b2f52301c5f9
 * vmx-bundle-16.1R1.7.tgz  MD5:d96766848731c12c0492e3ae2349b426
 * vmx-bundle-16.1R2.11.tgz  MD5:24bc389420bf02fb6ede36afa79a0a19
 * vmx-bundle-17.2R1.13.tgz  MD5:64569e60a2fd671aad565c7bd3745e88

It is NOT working with the following images:

* vmx-15.1F3.11.tgz  MD5:978fc8c0db05179564d0680040db8196

Usage
-----
The container must be `--privileged` to start KVM.
```
docker run -d --privileged --name my-vmx-router vr-vmx
```
It takes a couple of minutes for the virtual router to start and after this we
can login over SSH / NETCONF with the specified credentials.

The vFPC has a serial port that is exposed on TCP port 5002. Normally you don't
need to interact with it but I imagine it could be useful for some debugging.

You can provide additional configuration, to be merged with running
configuration on startup. Pass the complete configuration file in the correct
format in the `EXTRA_CONFIG` environment variable to the container.
Assuming you have the configuration stored in a file `extra-config.conf`, to
read it into an environment variable use this:

```
docker run --privileged -it --name vmx15 --env EXTRA_CONFIG="`cat extra-config.conf`" vrnetlab/vr-vmx:15.1F6.9 --trace
```

By default the virtual router runs in standalone mode - a single routing
engine. To change the mode to dual RE, pass `--dual-re` to the launch script.
The second RE console is exposed on port 5001. The management ports (NETCONF,
SSH, SNMP) are exposed on the container IP, offset by 1000.

```
docker run --privileged -d --name vmx15-dual-re vrnetlab/vr-vmx:15.1F6.9 --trace --dual-re
# connect to re0
ssh vrnetlab@$CONTAINER_IP -p 22
# connect to re1
ssh vrnetlab@$CONTAINER_IP -p 1022
```

System requirements
-------------------
CPU: 4 cores - 3 for the vFPC (virtual FPC - the forwarding plane) and 1 for
VCP (the RE / control plane).

RAM: 6GB - 2 for VCP and 4 for vFPC

Disk: ~5GB for JUNOS 15.1, ~7GB for JUNOS 16 (I know, it's huge!!)

FUAQ - Frequently or Unfrequently Asked Questions
-------------------------------------------------
##### Q: Why use vMX and not VRR?
A: Juniper does indeed publish a VRR image that only requires a single VM to
run, which would decrease the required resources. The vMX VCP (RE / control
plane image) can also be run in the same mode but would then lack certain
forwarding features, notably multicast (which was a dealbreaker for me).
vrnetlab doesn't focus on forwarding performance but the aim is to keep feature
parity with real routers and if you can't test that your PIM neighbors come up
correctly due to lack of multicast then.. well, that's no good.

##### Q: What about licenses?
A: Older vMX in evaluation mode are limited to 30 days and with a throughput
cap of 1Mbps. You can purchase bandwidth licenses to get rid of the time limit
and have a higher throughput cap. vMX 15.1F4 introduced additive bandwidth
licenses which means bandwidth licenses are added together, before which only
the bandwidth license with the highest capacity would be used. In 16.1 the
evaluation period of 30 days was removed to the benefit of a perpetual
evaluation license but still with a global throughput cap of 1Mbps.

##### Q: I'm getting this error: qemu-system-x86_64: /build/qemu-XXUWBP/qemu-2.1+dfsg/hw/usb/dev-storage.c:236: usb_msd_send_status: Assertion `s->csw.sig == cpu_to_le32(0x53425355)' failed.
A: Get a newer kernel & qemu. I've seen this on Ubuntu 15.10. Upgrading to
16.04 fixed it.
07070100000054000041ED00000000000000000000000264A8D17C00000000000000000000000000000000000000000000002A00000000vrnetlab-git1688785276.5a42305/vmx/docker07070100000055000081A400000000000000000000000164A8D17C00000229000000000000000000000000000000000000003500000000vrnetlab-git1688785276.5a42305/vmx/docker/DockerfileFROM debian:bullseye
MAINTAINER Kristian Larsson <kristian@spritelink.net>

ENV DEBIAN_FRONTEND=noninteractive

RUN apt-get update -qy \
 && apt-get upgrade -qy \
 && apt-get install -y \
    bridge-utils \
    iproute2 \
    python3-ipy \
    socat \
    qemu-kvm \
 && rm -rf /var/lib/apt/lists/*

ARG VERSION
ENV VERSION=${VERSION}
COPY vmx /vmx
COPY *.py /
COPY juniper.conf /

EXPOSE 22 161/udp 830 5000 57400 10000-10099
# mgmt and console ports for re1
EXPOSE 1022 1161/udp 1830 5001
HEALTHCHECK CMD ["/healthcheck.py"]
ENTRYPOINT ["/launch.py"]
07070100000056000081A400000000000000000000000164A8D17C000006AC000000000000000000000000000000000000003700000000vrnetlab-git1688785276.5a42305/vmx/docker/juniper.confgroups {
    re0 {
        system {
            host-name re0;
        }
        interfaces {
            fxp0 {
                unit 0 {
                    family inet {
                        address 10.0.0.15/24;
                    }
                }
            }
        }
    }
    re1 {
        system {
            host-name re1;
        }
        interfaces {
            fxp0 {
                unit 0 {
                    family inet {
                        address 10.0.0.16/24;
                    }
                }
            }
        }
    }
}
apply-groups [ re0 re1 ];
system {
    login {
        user vrnetlab {
            uid 2000;
            class super-user;
            authentication {
                encrypted-password "$6$CDmzGe/d$g43HmhI3FA.21JCYppnTg1h4q/JO4DOHSICLhhavqBem5zUTgKEcg5m9tBG1Ik6qmfb7L3v.wgj4/DkfgZejO0"; ## VR-netlab9
            }
        }
    }
    root-authentication {
        encrypted-password "$6$vOte4zs5$j1X3fElYvJSt8VPNXx2KzRNrZIkp9CeRX83/W4wQo5K4Tl/MHZeMcvbymEzm9/2ya3S4hU993YDSLY26ROGnW/"; ## VR-netlab9
    }
    services {
        ssh;
        extension-service {
            request-response {
                grpc {
                    clear-text {
                        port 57400;
                    }
                }
            }
        }
        netconf {
            ssh;
        }
    }
    syslog {
        user * {
            any emergency;
        }
        file messages {
            any notice;
            authorization info;
        }
        file interactive-commands {
            interactive-commands any;
        }
    }
}
chassis {
    fpc 0 {
        pic 0 {
            number-of-ports 96;
        }
    }
}
07070100000057000081ED00000000000000000000000164A8D17C00003D1F000000000000000000000000000000000000003400000000vrnetlab-git1688785276.5a42305/vmx/docker/launch.py#!/usr/bin/env python3

import datetime
import logging
import os
import pathlib
import re
import select
import signal
import subprocess
import sys
import time

import vrnetlab

def handle_SIGCHLD(signal, frame):
    os.waitpid(-1, os.WNOHANG)

def handle_SIGTERM(signal, frame):
    sys.exit(0)

signal.signal(signal.SIGINT, handle_SIGTERM)
signal.signal(signal.SIGTERM, handle_SIGTERM)
signal.signal(signal.SIGCHLD, handle_SIGCHLD)

#append port for gRPCs
vrnetlab.HOST_FWDS.append(('tcp', 57400, 57400))

class VMX_vcp(vrnetlab.VM):
    def __init__(self, username, password, dual_re=False, re_instance=0, install_mode=False):
        self.dual_re = dual_re
        self.num = re_instance
        self.install_mode = install_mode
        self.base_vcp_dir = pathlib.Path("/vmx/re{}".format(self.num if self.dual_re else ''))
        vcp_image = str(self.base_vcp_dir / sorted(self.base_vcp_dir.glob("junos-vmx-*.qcow2"))[0])
        super(VMX_vcp, self).__init__(username, password, disk_image=vcp_image, ram=2048, num=re_instance)

self.num_nics = 0
        self.qemu_args.extend(["-drive", "if=ide,file=" + str(self.base_vcp_dir / "vmxhdd.img")])
        if dual_re:
            product = "VM-vcp_vmx2-161-dualre-{}".format(re_instance)
        else:
            product = "VM-vcp_vmx2-161-re-0"
        self.smbios = ["type=0,vendor=Juniper",
                       "type=1,manufacturer=Juniper,product=%s,version=0.1.0" % product]
        # insert bootstrap config file into metadata image
        if self.install_mode:
            self.insert_bootstrap_config()
        else:
            self.insert_extra_config()
        # add metadata image if it exists
        if os.path.exists(self._metadata_usb):
            self.qemu_args.extend(
                 ["-usb", "-drive", "id=my_usb_disk,media=disk,format=raw,file={},if=none".format(self._metadata_usb),
                 "-device", "usb-storage,drive=my_usb_disk"])

@property
    def _metadata_usb(self):
        return self.base_vcp_dir / "metadata-usb-re{}.img".format(self.num if self.dual_re else '')

@property
    def _vcp_int(self):
        return "vcp-int{}".format(self.num if self.dual_re else '')

def start(self):
        # use parent class start() function
        super(VMX_vcp, self).start()
        # add interface to internal control plane bridge
        if not self.install_mode:
            vrnetlab.run_command(["brctl", "addif", "int_cp", self._vcp_int])
            vrnetlab.run_command(["ip", "link", "set", self._vcp_int, "up"])

def gen_mgmt(self):
        """ Generate mgmt interface(s)

We override the default function since we want a virtio NIC to the
            vFPC
        """
        # call parent function to generate first mgmt interface (e1000)
        res = super(VMX_vcp, self).gen_mgmt()
        # install mode doesn't need host port forwarding rules. if running in
        # dual-re mode, replace host port forwarding rules for the backup
        # routing engine
        if self.install_mode:
            res[-1] = re.sub(r',hostfwd.*', '', res[-1])
        elif self.dual_re and self.num == 1:
            res[-1] = re.sub(r',hostfwd.*', self.gen_host_forwards(mgmt_ip='10.0.0.16', offset=3000), res[-1])

if not self.install_mode:
            # add virtio NIC for internal control plane interface to vFPC
            res.append("-device")
            res.append("virtio-net-pci,netdev=%s,mac=%s" % (self._vcp_int, vrnetlab.gen_mac(1)))
            res.append("-netdev")
            res.append("tap,ifname=%(_vcp_int)s,id=%(_vcp_int)s,script=no,downscript=no" % { '_vcp_int': self._vcp_int })
        return res

def bootstrap_spin(self):
        """ This function should be called periodically to do work.

returns False when it has failed and given up, otherwise True
        """

if self.spins > 300:
            # too many spins with no result -> restart
            self.logger.warning("no output from serial console, restarting VCP")
            self.stop()
            self.start()
            self.spins = 0
            return

(ridx, match, res) = self.tn.expect([b"(?<!Last )login:", b"root@(%|[^:]*:~ #)"], 1)
        if match: # got a match!
            if ridx == 0: # matched login prompt, so should login
                self.logger.info("matched login prompt")
                self.wait_write("root", wait=None)
                self.wait_write("VR-netlab9", "Password:")
            if ridx == 1:
                if self.install_mode:
                    self.logger.info("requesting power-off")
                    self.wait_write("cli", None)
                    self.wait_write("request system power-off", '>')
                    self.wait_write("yes", 'Power Off the system')
                    self.running = True
                    return
                # run extra config!
                self.do_extra_config()
                self.running = True
                self.tn.close()
                # calc startup time
                startup_time = datetime.datetime.now() - self.start_time
                self.logger.info("Startup complete in: %s" % startup_time)
                return

else:
            # no match, if we saw some output from the router it's probably
            # booting, so let's give it some more time
            if res != b'':
                self.logger.trace("OUTPUT VCP[%d]: %s" % (self.num, res.decode()))
                # reset spins if we saw some output
                self.spins = 0

self.spins += 1

def do_extra_config(self):
        """ Do the actual bootstrap config
        """
        self.wait_write("mount_msdosfs /dev/da0 /mnt", None)
        self.wait_write("cli", None)
        self.wait_write("configure", '>', 10)
        self.wait_write("load merge /mnt/extra-config.conf")
        self.wait_write("commit")
        self.wait_write("exit", "#")

def wait_write(self, cmd, wait='#', timeout=None):
        """ Wait for something and then send command
        """
        if wait:
            self.logger.trace("Waiting for %s" % wait)
            while True:
                (ridx, match, res) = self.tn.expect([wait.encode(), b"Retry connection attempts"], timeout=timeout)
                if match:
                    if ridx == 0:
                        break
                    if ridx == 1:
                        self.tn.write("yes\r".encode())
            self.logger.trace("Read: %s" % res.decode())
        self.logger.debug("writing to serial console: %s" % cmd)
        self.tn.write("{}\r".format(cmd).encode())

def insert_bootstrap_config(self):
        vrnetlab.run_command(["mount", "-o", "loop", self._metadata_usb, "/mnt"])
        vrnetlab.run_command(["mkdir", "/tmp/vmm-config"])
        vrnetlab.run_command(["tar", "-xzvf", "/mnt/vmm-config.tgz", "-C", "/tmp/vmm-config"])
        vrnetlab.run_command(["mkdir", "/tmp/vmm-config/config"])
        vrnetlab.run_command(["cp", "/juniper.conf", "/tmp/vmm-config/config/"])
        vrnetlab.run_command(["tar", "zcf", "vmm-config.tgz", "-C", "/tmp/vmm-config", "."])
        vrnetlab.run_command(["cp", "vmm-config.tgz", "/mnt/vmm-config.tgz"])
        vrnetlab.run_command(["umount", "/mnt"])

def insert_extra_config(self):
        extra_config = os.getenv('EXTRA_CONFIG')
        if extra_config:
            self.logger.debug('extra_config = ' + extra_config)
            vrnetlab.run_command(["mount", "-o", "loop", self._metadata_usb, "/mnt"])
            with open('/mnt/extra-config.conf', 'w') as f:
                f.write(extra_config)
            vrnetlab.run_command(["umount", "/mnt"])

class VMX_vfpc(vrnetlab.VM):
    def __init__(self):
        # "Hardcode" the num to 3 for this VM. This gives us a static mapping
        # for the console port (5002) independent of how many VCPs are running
        super(VMX_vfpc, self).__init__(None, None, disk_image = "/vmx/vfpc.img", num=3)
        self.num_nics = 96

self.nic_type = "virtio-net-pci"
        self.qemu_args.extend(["-cpu", "SandyBridge", "-M", "pc", "-smp", "3"])
        # add metadata image if it exists
        if os.path.exists("/vmx/metadata-usb-fpc0.img"):
            self.qemu_args.extend(
                ["-usb", "-drive", "id=fpc_usb_disk,media=disk,format=raw,file=/vmx/metadata-usb-fpc0.img,if=none",
                 "-device", "usb-storage,drive=fpc_usb_disk"])

def gen_mgmt(self):
        res = []
        # mgmt interface
        res.extend(["-device", "virtio-net-pci,netdev=mgmt,mac=%s" % vrnetlab.gen_mac(0)])
        res.extend(["-netdev", "user,id=mgmt,net=10.0.0.0/24"])
        # internal control plane interface to vFPC
        res.extend(["-device", "virtio-net-pci,netdev=vfpc-int,mac=%s" %
                    vrnetlab.gen_mac(0)])
        res.extend(["-netdev",
                    "tap,ifname=vfpc-int,id=vfpc-int,script=no,downscript=no"])

if self.version not in ("14.1.R6.4",):
            # dummy interface for some vMX versions - not sure why vFPC wants
            # it but without it we get a misalignment
            res.extend(["-device", "virtio-net-pci,netdev=dummy,mac=%s" % vrnetlab.gen_mac(0)])
            res.extend(["-netdev", "tap,ifname=vfpc-dummy,id=dummy,script=no,downscript=no"])

return res

def start(self):
        # use parent class start() function
        super(VMX_vfpc, self).start()
        # add interface to internal control plane bridge
        vrnetlab.run_command(["brctl", "addif", "int_cp", "vfpc-int"])
        vrnetlab.run_command(["ip", "link", "set", "vfpc-int", "up"])

def bootstrap_spin(self):
        (ridx, match, res) = self.tn.expect([b"localhost login", b"qemux86-64 login", b"mounting /dev/sda2 on /mnt failed"], 1)
        if match:
            if ridx in (0, 1): # got login - vFPC start succeeded!
                self.logger.info("vFPC successfully started")
                self.running = True
                self.tn.close()
            if ridx == 2: # vFPC start failed - restart it
                self.logger.info("vFPC start failed, restarting")
                self.stop()
                self.start()
        if res != b'':
            pass
            #self.logger.trace("OUTPUT VFPC: %s" % res.decode())

return

class VMX(vrnetlab.VR):
    """ Juniper vMX router
    """

def __init__(self, username, password, dual_re=False):
        self.dual_re = dual_re

super(VMX, self).__init__(username, password)

if not dual_re:
            self.vms = [ VMX_vcp(username, password), VMX_vfpc() ]
        else:
            self.vms = [ VMX_vcp(username, password, dual_re=True, re_instance=0),
                         VMX_vcp(username, password, dual_re=True, re_instance=1),
                         VMX_vfpc() ]

# set up bridge for connecting VCP with vFPC
        vrnetlab.run_command(["brctl", "addbr", "int_cp"])
        vrnetlab.run_command(["ip", "link", "set", "int_cp", "up"])

def start(self):
        # Set up socats for re1, with a different offset: $CONTAINER_IP:1022 -> 10.0.0.16:3022
        if self.dual_re:
            self.start_socat(src_offset=1000, dst_offset=3000)

super(VMX, self).start()

class VMX_installer(VMX):
    """ VMX installer

Will start the VMX VCP and then shut it down. Booting the VCP for the
        first time requires the VCP itself to load some config and then it will
        restart. Subsequent boots will not require this restart. By running
        this "install" when building the docker image we can decrease the
        normal startup time of the vMX.
    """
    def __init__(self, username, password, dual_re=False):
        super().__init__(username, password, dual_re)

if not dual_re:
            self.vms = [ VMX_vcp(username, password, install_mode=True) ]
        else:
            # When installing in dual-RE mode, boot a standalone RE and also 2x
            # dualre. The final image will end up with 3 VMs, but we choose
            # which are started with the `--dual-re` option.
            self.vms = [ VMX_vcp(username, password, dual_re=True, re_instance=0, install_mode=True),
                         VMX_vcp(username, password, dual_re=True, re_instance=1, install_mode=True),
                         VMX_vcp(username, password, dual_re=False, re_instance=2, install_mode=True)]

def install(self):
        self.logger.info("Installing VMX (%d VCP)" % len(self.vms))
        while not all(vcp.running for vcp in self.vms):
            for idx, vcp in enumerate(self.vms):
                if not vcp.running:
                    self.logger.trace("RE[%d]: working" % idx)
                    vcp.work()
        self.logger.debug("All %d VCPs running" % len(self.vms))

def waitable_pipes():
            return [vcp.p.stdout for vcp in self.vms if vcp.running] + [vcp.p.stderr for vcp in self.vms if vcp.running]
        # wait for system to shut down cleanly
        while waitable_pipes():
            read_pipes, _, _ = select.select(waitable_pipes(), [],  [])
            for read_pipe in read_pipes:
                for idx, vcp in enumerate(self.vms):
                    if read_pipe in (vcp.p.stdout, vcp.p.stderr):
                        break

try:
                    vcp.p.communicate(timeout=1)
                except subprocess.TimeoutExpired:
                    pass
                except Exception as exc:
                    # assume it's dead
                    self.logger.info("RE[%d]: Can't communicate with qemu process, assuming VM has shut down properly.\n%s" % (idx, str(exc)))
                    vcp.stop()

try:
                    (ridx, match, res) = vcp.tn.expect([b"Powering system off"], 1)
                    if res != b'':
                        self.logger.trace("RE[%d]: OUTPUT VCP: %s" % (idx, res.decode()))
                except Exception as exc:
                    # assume it's dead
                    self.logger.info("RE[%d]: Can't communicate with qemu process, assuming VM has shut down properly.\n%s" % (idx, str(exc)))
                    vcp.stop()

self.logger.info("Installation complete")

if __name__ == '__main__':
    import argparse
    parser = argparse.ArgumentParser(description='')
    parser.add_argument('--trace', action='store_true', help='enable trace level logging')
    parser.add_argument('--username', default='vrnetlab', help='Username')
    parser.add_argument('--password', default='VR-netlab9', help='Password')
    parser.add_argument('--install', action='store_true', help='Install vMX')
    parser.add_argument('--dual-re', action='store_true', help='Boot dual Routing Engines')
    parser.add_argument('--num-nics', type=int, default=96, help='Number of NICs, this parameter is IGNORED, only added to be compatible with other platforms')
    args = parser.parse_args()

LOG_FORMAT = "%(asctime)s: %(module)-10s %(levelname)-8s %(message)s"
    logging.basicConfig(format=LOG_FORMAT)
    logger = logging.getLogger()

logger.setLevel(logging.DEBUG)
    if args.trace:
        logger.setLevel(1)

if args.install:
        vr = VMX_installer(args.username, args.password, args.dual_re)
        vr.install()
    else:
        vr = VMX(args.username, args.password, args.dual_re)
        vr.start()
07070100000058000081ED00000000000000000000000164A8D17C00000531000000000000000000000000000000000000003200000000vrnetlab-git1688785276.5a42305/vmx/vmx-extract.sh#!/bin/sh

IMAGE=$1

echo "Extracting Juniper vMX tgz"
rm -rf tmp docker/vmx
mkdir -p tmp docker/vmx
tar -zxvf ${IMAGE} -C tmp/ --wildcards vmx*/images/*img --wildcards vmx*/images/*qcow2
# VCP
# The 're' directory contains files for a standalone RE
mkdir -p docker/vmx/re
mv -v tmp/vmx*/images/vmxhdd.img docker/vmx/re
mv -v tmp/vmx*/images/junos-vmx*qcow2 docker/vmx/re		# 16.1 and newer
mv -v tmp/vmx*/images/jinstall64-vmx*img docker/vmx/re
mv -v tmp/vmx*/images/metadata-usb-re*.img docker/vmx/re
mv -v tmp/vmx*/images/metadata_usb.img docker/vmx/re/metadata-usb-re.img	# old style
# The 're0' and 're1' directories contain files for a dual-RE deployment
for re in $(seq 0 1); do
	mkdir -v docker/vmx/re${re}
	cp -v docker/vmx/re/vmxhdd.img docker/vmx/re${re}
	cp -v docker/vmx/re/metadata-usb-re${re}.img docker/vmx/re${re}
	ls docker/vmx/re/junos-vmx*qcow2 && ln docker/vmx/re/junos-vmx*qcow2 docker/vmx/re${re}/
	ls docker/vmx/re/jinstall64-vmx*img && ln docker/vmx/re/jinstall64-vmx*img docker/vmx/re${re}/
done

# vFPC / vPFE
mv -v tmp/vmx*/images/vPFE-lite-*.img docker/vmx/vfpc.img	# 14.1
mv -v tmp/vmx*/images/vFPC*.img docker/vmx/vfpc.img		# 15.1 and newer
mv -v tmp/vmx*/images/metadata-usb-*.img docker/vmx/
mv -v tmp/vmx*/images/metadata_usb.img docker/vmx/metadata-usb-re.img	# old style
# clean up
rm -rfv tmp
07070100000059000041ED00000000000000000000000364A8D17C00000000000000000000000000000000000000000000002400000000vrnetlab-git1688785276.5a42305/vqfx0707010000005A000081A400000000000000000000000164A8D17C0000025D000000000000000000000000000000000000002D00000000vrnetlab-git1688785276.5a42305/vqfx/MakefileVENDOR=Juniper
NAME=vQFX
IMAGE_FORMAT=vmdk
IMAGE_GLOB=*.vmdk

# match versions like:
# vqfx10k-re-15.1X53-D60.vmdk
VERSION=$(shell echo $(IMAGE) | sed -e 's/^vqfx10k-re-$[0-9][0-9]\.[0-9][A-Z][0-9]\+\(\.[0-9]\+$\?$-D[0-9]\+$\)[^0-9].*$$/\1/')

-include ../makefile-sanity.include
-include ../makefile.include

# vqfx10k-pfe-20160609-2.vmdk
# TODO: we should make sure we only copy one PFE image (the latest?), in case there are many
docker-pre-build:
	cp vqfx10k-pfe*.vmdk docker/

# TODO: upstream the rest of the fixes to make it work
docker-test-image:
	@echo "Skipping test for $(VENDOR) $(NAME)"
0707010000005B000081A400000000000000000000000164A8D17C000007DB000000000000000000000000000000000000002E00000000vrnetlab-git1688785276.5a42305/vqfx/README.mdvrnetlab / Juniper vQFX
=======================
This is the vrnetlab docker image for Juniper vQFX.

Building the docker image
-------------------------
Download vQFX from http://www.juniper.net/support/downloads/?p=vqfxeval#sw
Put the two .vmdk files in this directory and run `make` to produce a docker
image named `vr-vqfx`. The version tag of the image will be the same as the
JUNOS version, e.g. vqfx10k-re-15.1X53-D60.vmdk will produce an image called
vr-vqfx:15.1X53-D60.

Please note that you should always specify the version number of the docker
image when running your router. Docker defaults to using 'latest' 
Please note that you will always need to specify version when starting your
router as the "latest" tag is not added to any images since it has no meaning
in this context.

Tested with:
 * vqfx10k-re-15.1X53-D60.vmdk  MD5:758669e88213fbd7943f5da7f6d7bd59

The vPFE has a serial port that is exposed on TCP port 5001. Normally you don't
need to interact with it but I imagine it could be useful for some debugging.
The vPFE of the vQFX doesn't send it's output to serial per default so you have
to catch it very early on in the boot so you can modify the GRUB parameters
(press 'e' to do that) and add console=ttyS0 to the "linux..." line.

System requirements
-------------------
CPU: 2 cores

RAM: 4096MB

Disk: 1.5GB

FUAQ - Frequently or Unfrequently Asked Questions
-------------------------------------------------
##### Q: Do you have a question?
A: Uhhhh
0707010000005C000041ED00000000000000000000000264A8D17C00000000000000000000000000000000000000000000002B00000000vrnetlab-git1688785276.5a42305/vqfx/docker0707010000005D000081A400000000000000000000000164A8D17C000001C1000000000000000000000000000000000000003600000000vrnetlab-git1688785276.5a42305/vqfx/docker/DockerfileFROM debian:bullseye
MAINTAINER Kristian Larsson <kristian@spritelink.net>

ENV DEBIAN_FRONTEND=noninteractive

RUN apt-get update -qy \
 && apt-get upgrade -qy \
 && apt-get install -y \
    bridge-utils \
    iproute2 \
    python3 \
    socat \
    qemu-kvm \
 && rm -rf /var/lib/apt/lists/*

ARG IMAGE
COPY $IMAGE /
COPY *-pfe-* /
COPY *.py /

EXPOSE 22 161/udp 830 5000 10000-10099
HEALTHCHECK CMD ["/healthcheck.py"]
ENTRYPOINT ["/launch.py"]
0707010000005E000081ED00000000000000000000000164A8D17C00001F30000000000000000000000000000000000000003500000000vrnetlab-git1688785276.5a42305/vqfx/docker/launch.py#!/usr/bin/env python3

import datetime
import logging
import os
import re
import signal
import sys

import vrnetlab

def handle_SIGCHLD(signal, frame):
    os.waitpid(-1, os.WNOHANG)

def handle_SIGTERM(signal, frame):
    sys.exit(0)

signal.signal(signal.SIGINT, handle_SIGTERM)
signal.signal(signal.SIGTERM, handle_SIGTERM)
signal.signal(signal.SIGCHLD, handle_SIGCHLD)

class VQFX_vcp(vrnetlab.VM):
    def __init__(self, username, password):
        for e in os.listdir("/"):
            if re.search("-re-.*.vmdk", e):
                vrnetlab.run_command(["qemu-img", "create", "-b", "/" + e, "-f", "qcow", "/vcp.qcow2"])
        super(VQFX_vcp, self).__init__(username, password, disk_image="/vcp.qcow2", ram=2048)
        self.num_nics = 12

def start(self):
        # use parent class start() function
        super(VQFX_vcp, self).start()
        # add interface to internal control plane bridge
        vrnetlab.run_command(["brctl", "addif", "int_cp", "vcp-int"])
        vrnetlab.run_command(["ip", "link", "set", "vcp-int", "up"])

def gen_mgmt(self):
        """ Generate mgmt interface(s)

We override the default function since we want a virtio NIC to the
            vFPC
        """
        # call parent function to generate first mgmt interface (e1000)
        res = super(VQFX_vcp, self).gen_mgmt()
        # add virtio NIC for internal control plane interface to vFPC
        res.append("-device")
        res.append("e1000,netdev=vcp-int,mac=%s" % vrnetlab.gen_mac(1))
        res.append("-netdev")
        res.append("tap,ifname=vcp-int,id=vcp-int,script=no,downscript=no")

# dummy
        for i in range(1):
            res.append("-device")
            res.append("e1000,netdev=dummy%d,mac=%s" % (i, vrnetlab.gen_mac(1)))
            res.append("-netdev")
            res.append("tap,ifname=dummy%d,id=dummy%d,script=no,downscript=no" % (i, i))

return res

def bootstrap_spin(self):
        """ This function should be called periodically to do work.

returns False when it has failed and given up, otherwise True
        """
        if self.spins > 300:
            # too many spins with no result -> restart
            self.logger.warning("no output from serial console, restarting VCP")
            self.stop()
            self.start()
            self.spins = 0
            return

(ridx, match, res) = self.tn.expect([b"login:", b"root@vqfx-re:RE:0%"], 1)
        if match: # got a match!
            if ridx == 0: # matched login prompt, so should login
                self.logger.info("matched login prompt")
                self.wait_write("root", wait=None)
                self.wait_write("Juniper", wait="Password:")
            if ridx == 1:
                # run main config!
                self.bootstrap_config()
                self.running = True
                self.tn.close()
                # calc startup time
                startup_time = datetime.datetime.now() - self.start_time
                self.logger.info("Startup complete in: %s" % startup_time)
                return

else:
            # no match, if we saw some output from the router it's probably
            # booting, so let's give it some more time
            if res != b'':
                self.logger.trace("OUTPUT VCP: %s" % res.decode())
                # reset spins if we saw some output
                self.spins = 0

self.spins += 1

def bootstrap_config(self):
        """ Do the actual bootstrap config
        """
        self.wait_write("cli", None)
        self.wait_write("configure", '>', 10)
        self.wait_write("set system services ssh")
        self.wait_write("set system services netconf ssh")
        self.wait_write("set system services netconf rfc-compliant")
        self.wait_write("delete system login user vagrant")
        self.wait_write("set system login user %s class super-user authentication plain-text-password" % self.username)
        self.wait_write(self.password, 'New password:')
        self.wait_write(self.password, 'Retype new password:')
        self.wait_write("set system root-authentication plain-text-password")
        self.wait_write(self.password, 'New password:')
        self.wait_write(self.password, 'Retype new password:')
        self.wait_write("delete interfaces")
        self.wait_write("set interfaces em0 unit 0 family inet address 10.0.0.15/24")
        self.wait_write("set interfaces em1 unit 0 family inet address 169.254.0.2/24")
        self.wait_write("commit")
        self.wait_write("exit")

class VQFX_vpfe(vrnetlab.VM):
    def __init__(self):
        for e in os.listdir("/"):
            if re.search("-pfe-.*.vmdk", e):
                vrnetlab.run_command(["qemu-img", "create", "-b", "/" + e, "-f", "qcow", "/vpfe.qcow2"])
        super(VQFX_vpfe, self).__init__(None, None, disk_image="/vpfe.qcow2", num=1, ram=2048)
        self.num_nics = 0

def gen_mgmt(self):
        res = []
        # mgmt interface
        res.extend(["-device", "e1000,netdev=mgmt,mac=%s" % vrnetlab.gen_mac(0)])
        res.extend(["-netdev", "user,id=mgmt,net=10.0.0.0/24"])
        # internal control plane interface to vFPC
        res.extend(["-device", "e1000,netdev=vpfe-int,mac=%s" %
                    vrnetlab.gen_mac(0)])
        res.extend(["-netdev",
                    "tap,ifname=vpfe-int,id=vpfe-int,script=no,downscript=no"])

return res

def start(self):
        # use parent class start() function
        super(VQFX_vpfe, self).start()
        # add interface to internal control plane bridge
        vrnetlab.run_command(["brctl", "addif", "int_cp", "vpfe-int"])
        vrnetlab.run_command(["ip", "link", "set", "vpfe-int", "up"])

def bootstrap_spin(self):
        self.running = True
        self.tn.close()
        return

class VQFX(vrnetlab.VR):
    """ Juniper vMX router
    """

def __init__(self, username, password):
        super(VQFX, self).__init__(username, password)

self.vms = [ VQFX_vcp(username, password), VQFX_vpfe() ]

# set up bridge for connecting VCP with vFPC
        vrnetlab.run_command(["brctl", "addbr", "int_cp"])
        vrnetlab.run_command(["ip", "link", "set", "int_cp", "up"])

LOG_FORMAT = "%(asctime)s: %(module)-10s %(levelname)-8s %(message)s"
    logging.basicConfig(format=LOG_FORMAT)
    logger = logging.getLogger()

logger.setLevel(logging.DEBUG)
    if args.trace:
        logger.setLevel(1)

vr = VQFX(args.username, args.password)
    vr.start()
0707010000005F000041ED00000000000000000000000364A8D17C00000000000000000000000000000000000000000000002600000000vrnetlab-git1688785276.5a42305/vr-bgp07070100000060000081A400000000000000000000000164A8D17C0000029D000000000000000000000000000000000000003100000000vrnetlab-git1688785276.5a42305/vr-bgp/DockerfileARG REGISTRY=vrnetlab/
FROM ${REGISTRY}vr-xcon
MAINTAINER Kristian Larsson <kristian@spritelink.net>

ENV DEBIAN_FRONTEND=noninteractive

RUN apt-get update -qy \
 && apt-get upgrade -qy \
 && apt-get install -y \
    iputils-ping \
    iputils-tracepath \
    git \
    golang \
    procps \
    python \
    python-setuptools \
    python3-jinja2 \
    python3-flask \
    tcpdump \
    telnet \
    wget \
 && rm -rf /var/lib/apt/lists/* \
 && wget -O exabgp.tar.gz https://github.com/Exa-Networks/exabgp/archive/3.4.18.tar.gz \
 && tar zxvf exabgp.tar.gz \
 && cd /exabgp* && python setup.py install \
 && cd / && rm -rf exabgp*

ADD . /

ENTRYPOINT ["/vr-bgp.py"]
07070100000061000081A400000000000000000000000164A8D17C0000018F000000000000000000000000000000000000002F00000000vrnetlab-git1688785276.5a42305/vr-bgp/Makefile-include ../makefile-sanity.include

all:
	docker build --build-arg http_proxy=$(http_proxy) --build-arg https_proxy=$(https_proxy) --build-arg REGISTRY=$(REGISTRY) -t $(REGISTRY)vr-bgp .

docker-push:
	docker push $(REGISTRY)vr-bgp

docker-test:
	@echo "TODO: implement smoke test"

docker-test-clean:
	@echo "TODO: implement smoke test"

docker-test-save-logs:
	@echo "TODO: implement smoke test"
07070100000062000081A400000000000000000000000164A8D17C00001504000000000000000000000000000000000000003000000000vrnetlab-git1688785276.5a42305/vr-bgp/README.mdvrnetlab BGP speaker
====================
This is vr-bgp, the vrnetlab BGP speaker. It is specifically written as a test
helper for a CI environment so that one can easily test BGP route policies.
Under the hood we use ExaBGP together with a few Python helper programs to
build a dead simple HTTP API.

It uses the vrnetlab xcon program to connect to a virtual router port. See
vr-xcon for more information on how that works under the hood. Naturally it
assumes the router to test is a vrnetlab router of some sort.

The idea is that you CI runner spins up one or more virtual routers of your
choice, starts one or more vr-bgp instances to simulate different BGP
relations, then instructs the vr-bgp instances to announce routes and checks
the received routes to verify they comply with the routing policy.

For example, a service provider network typically has different classes of BGP
neighbors, e.g.:

* iBGP full-mesh between core routes
 * iBGP route reflector sessions from core to edge routers
 * eBGP to peering partners
 * eBGP to customers
 * ...

One would setup a vr-bgp instance to simulate each of these classes. Tell the
"peering partner class vr-bgp" instance to announce 1.2.3.0/24 and you can then
look at the vr-bgp instance simulating the iBGP full-mesh to make sure you
properly receive this prefix, that it has the correct communities,
local-preference and that MED is stripped / zeroized (if that is what you
want!). Since the testing happens over a standard interface (BGP) it is simple
to replace the virtual router with another vendor's and thus verify that the
routing policy of all your vendors ultimately do the same thing.

Configuring the virtual router is outside the scope of vrnetlab - you are
supposed to use your normal provisioning system for this.

vr-bgp exposes a super simple HTTP API to announce routes and collect received
routes.

vr-bgp only supports a single BGP neighbor (well, one per AFI - IPv4 / IPv6) at
a time which might seem tedious at first but it also simplifies things a lot as
we don't have to key information on individual neighbors.

next-hops are stored as attributes of a prefix, which isn't entirely correct as
it's really part of the NLRI information in BGP updates and not part of the
path attributes. However, putting it as an attribute vastly simplifies things.
The primary drawback is that there is no way to tell two prefixes with
different next-hops apart. This normally does not happen for vr-bgp since we
only have one BGP neighbor per AFI and that neighbor will only announce one
next-hop per prefix but this might make us incompatible with BGP add-path.

API
---
The vr-bgp API is a very simple RESTful API running by default on port 5000, exposing three endpoints:
 * `GET http://docker-ip:5000/neighbors`: lists all configured neighbors and connection states
 * `GET http://docker-ip:5000/received`: lists all received prefixes by address family and their attributes
 * `POST http://docker-ip:5000/announce`: announces the prefixes specified in the body of the request, with optional attributes

### `GET /neighbors`
```javascript
{
    "192.168.21.2": {
        "state": "up",
        "timestamp": "2017-05-31 07:42:06"
    },
    "2001:db8:5::21:2": {
        "state": "up",
        "timestamp": "2017-05-31 07:42:06"
    }
}
```

The example shows a vr-bgp speaker configured with two neighbors. Connections
to both neighbors are established.

### `GET /received`
```javascript
{
    "ipv4 unicast": {
        "22.0.0.0/24": {
            "as-path": [
                2792,
                22
            ],
            "community": [
                [
                    2792,
                    10300
                ],
                [
                    2792,
                    11276
                ]
            ],
            "confederation-path": [],
            "next-hop": "192.168.22.1",
            "origin": "igp"
        }
    },
    "ipv6 unicast": {
        "2001:11::/64": {
            "as-path": [
                2792,
                11
            ],
            "community": [
                [
                    11,
                    1234
                ]
            ],
            "confederation-path": [],
            "next-hop": "2001:db8:5::22:1",
            "origin": "igp"
        }
    }
}
```

The example shows two received prefixes for IPv4 and IPv4 address family with
all attributes. Note that community string `2792:10300` is broken down into a
list of integers `[2792, 10300]`.

### `POST /announce`
```javascript
{"routes":
    [
        { "prefix": "21.0.0.0/24" },
        { "prefix": "21.1.0.0/24", "community": ["2792:10300"]},
        { "prefix": "21.2.0.0/24", "as-path": [21, 65000] },
        { "prefix": "21.3.0.0/24", "med": 100 }
    ]
}
```

The example shows announcement configuration for four prefixes. By default, all
prefixes originate in the local AS (21 in this example).

Additional attributes exposed through the API are:
 * `community`: set any number of communities by providing a list of strings
   `["x:y", "w:z"]`
 * `as-path`: override the default as-path (local-as) by providing a list of
   integers `[21, 65000]`
 * `med`: set multi-exit discriminator (MED) attribute to an integer value

Example
-------
See the example directory for a full blown example of vr-bgp in action to
verify a network's BGP routing policy.
07070100000063000081ED00000000000000000000000164A8D17C00000957000000000000000000000000000000000000003000000000vrnetlab-git1688785276.5a42305/vr-bgp/bgpapi.py#!/usr/bin/env python3

from flask import Flask, json, request
import sys

# keep track of what we announce so we can easily withdraw
announced_routes = {}
# keep track of received routes
received_routes = {}

app = Flask(__name__)

@app.route('/announce', methods=['POST'])
def announce():
    global announced_routes

if request.headers['Content-Type'] != 'application/json':
        return "Plxz send JSON"

try:
        routes = request.json['routes']
        new_routes = {route['prefix']: route for route in routes}
    except:
        return "Incorrectly formed query (probably)"

# announce new routes
    to_announce = set(new_routes)
    for prefix in to_announce:
        route = new_routes[prefix]

command = "announce route %(prefix)s next-hop self" % route
        if 'community' in route:
            command += " community [" + " ".join(route['community']) + "]"
        if 'med' in route:
            command += " med " + str(route['med'])
        if 'as-path' in route:
            command += " as-path [" + " ".join([str(x) for x in route['as-path']]) + "]"
        sys.stdout.write('%s\n' % command)
        sys.stdout.flush()

# withdraw old routes
    to_withdraw = set(announced_routes) - set(new_routes)
    for prefix in to_withdraw:
        command = "withdraw route %s" % prefix
        sys.stdout.write('%s\n' % command)
        sys.stdout.flush()

announced_routes = new_routes

return 'announced: %d  withdrawn: %d  currently announcing: %d\n' % (len(to_announce), len(to_withdraw), len(announced_routes))

@app.route('/received', methods=['GET'])
def received():
    import sqlite3
    conn = sqlite3.connect('/tmp/bgp.db')
    c = conn.cursor()
    c.execute("SELECT afi, prefix, attributes FROM received_routes")
    res = {}
    for row in c.fetchall():
        if row[0] not in res:
            res[row[0]] = {}
        res[row[0]][row[1]] = json.loads(row[2])

return json.dumps(res)

@app.route('/neighbors', methods=['GET'])
def get_neighbors():
    import sqlite3
    conn = sqlite3.connect('/tmp/bgp.db')
    c = conn.cursor()
    c.execute("SELECT ip, state, ts FROM neighbors")
    res = {}
    for row in c.fetchall():
        res[row[0]] = {
            'state': row[1],
            'timestamp': row[2]
        }

return json.dumps(res)

if __name__ == '__main__':
    app.run(host='0.0.0.0',debug=True)
07070100000064000081ED00000000000000000000000164A8D17C00001226000000000000000000000000000000000000003000000000vrnetlab-git1688785276.5a42305/vr-bgp/bgprec.py#!/usr/bin/env python3

from datetime import datetime
import json
import sqlite3
import sys

# debug log file
f = open("/tmp/bgp.log", "a")

def log(msg):
    f.write(msg)
    f.write("\n")
    f.flush()

conn = sqlite3.connect('/tmp/bgp.db', detect_types=sqlite3.PARSE_DECLTYPES)
c = conn.cursor()
try:
    c.execute("SELECT * FROM received_routes")
except sqlite3.OperationalError:
    # create table to store received routes
    c.execute("CREATE TABLE received_routes (afi string, prefix string, attributes string)")
    c.execute("CREATE UNIQUE INDEX received_routes__prefix ON received_routes(afi, prefix)")

# create table to store neighbor state
    c.execute("CREATE TABLE neighbors (ip string, state string, ts timestamp)")
    c.execute("CREATE UNIQUE INDEX neighbors_ip ON neighbors(ip)")

def upsert_neighbor_state(ip, state, timestamp):
    """ Insert or update the state of a neighbor in the database
    """
    c.execute("SELECT * FROM neighbors WHERE ip=?", [ip])
    if c.fetchone() is None:
        log("INSERTING to db neighbor")
        c.execute("INSERT INTO neighbors (ip, state, ts) VALUES (?, ?, ?)", [ip, state, timestamp])
    else:
        log("UPDATING db neighbor\n")
        c.execute("UPDATE neighbors SET state = ?, ts = ? WHERE ip = ?", [state, timestamp, ip])
    conn.commit()

def upsert_prefix(afi, prefix, attributes):
    """ Insert or update a prefix in the database
    """
    c.execute("SELECT * FROM received_routes WHERE afi=? AND prefix=?", [afi, prefix])
    if c.fetchone() is None:
        log("INSERTING to db prefix")
        c.execute("INSERT INTO received_routes (afi, prefix, attributes) VALUES (?, ?, ?)", [afi, prefix, json.dumps(attributes)])
    else:
        log("UPDATING db prefix")
        c.execute("UPDATE received_routes SET attributes = ? WHERE afi = ? AND prefix = ?", [json.dumps(attributes), afi, prefix])
    conn.commit()

def remove_prefix(afi, prefix):
    """ Remove a prefix from the database
    """
    c.execute("DELETE FROM received_routes WHERE afi=? AND prefix=?", [afi, prefix])
    conn.commit()

def parse_message(line):
    # Parse JSON string  to dictionary
    msg = json.loads(line)

timestamp = datetime.fromtimestamp(msg['time'])

if msg['type'] == 'state':
        neighbor_ip = msg['neighbor']['ip']
        state = msg['neighbor']['state']
        upsert_neighbor_state(neighbor_ip, state, timestamp)

if msg['type'] == 'update':
        if 'update' in msg['neighbor']['message']:
            update = msg['neighbor']['message']['update']

# handle announce
            if 'announce' in update:
                for afi, nexthops in update['announce'].items():
                    if 'null' in nexthops:
                        log("Received EOR for {}".format(afi))
                    else:
                        for nexthop, prefixes in nexthops.items():
                            if nexthop.startswith('fe80:'):
                                # ignore IPv6 link local next-hops. BGP sends
                                # both LL next-hop and GUA so we just ignore LL
                                # and parse GUA
                                continue
                            for prefix in prefixes:
                                log("announce {}".format(prefix))
                                attributes = update['attribute']
                                # store next-hop, which is NLRI information as
                                # (path) attribute. this is not according to
                                # RFC but gosh does it simplify things.
                                attributes['next-hop'] = nexthop
                                upsert_prefix(afi, prefix, attributes)

# handle withdraws
            if 'withdraw' in update:
                for afi, prefixes in update['withdraw'].items():
                    for prefix in prefixes:
                        log("Withdraw {}".format(prefix))
                        remove_prefix(afi, prefix)
        elif 'eor' in msg['neighbor']['message']:
            eor = msg['neighbor']['message']['eor']
            log("Received EOR for {} {}".format(eor['afi'], eor['safi']))
        else:
            log("Unknown message")
            raise Exception("Unknown message")

blank = 0
while True:
    line = sys.stdin.readline().strip()

# abort if we just see blank lines - prolly means exa died
    if line == "":
        blank += 1
        # got 99 blank lines and this is one
        if blank > 99:
            break
        continue
    blank = 0

f.write(line + "\n")
    f.flush()
    parse_message(line)
07070100000065000081A400000000000000000000000164A8D17C00000570000000000000000000000000000000000000003600000000vrnetlab-git1688785276.5a42305/vr-bgp/exabgp.conf.tplgroup test {
    process bgpapi {
        run /bgpapi.py;
    }

process bgprec {
        encoder json;
        receive {
            neighbor-changes;
            parsed;
            update;
        }
        run /bgprec.py;
    }

router-id {{config.ROUTER_ID}};
    local-as {{config.LOCAL_AS}};

{%- if config.IPV4_NEIGHBOR %}
    neighbor {{config.IPV4_NEIGHBOR}} {
        peer-as {{config.PEER_AS}};
        local-address {{config.IPV4_LOCAL_ADDRESS}};
        {%- if not config.ALLOW_MIXED_AFI_TRANSPORT %}
        family {
            ipv4 unicast;
        }
        {%- endif %}
        {%- if config.MD5 %}
        md5 "{{config.MD5}}";
        {%- endif %}
        {%- if config.LISTEN %}
        listen 179;
        {%- endif %}
        {%- if config.TTLSECURITY %}
        ttl-security;
        {%- endif %}
    }
{%- endif %}
{%- if config.IPV6_NEIGHBOR %}
    neighbor {{config.IPV6_NEIGHBOR}} {
        peer-as {{config.PEER_AS}};
        local-address {{config.IPV6_LOCAL_ADDRESS}};
        {%- if not config.ALLOW_MIXED_AFI_TRANSPORT %}
        family {
            ipv6 unicast;
        }
        {%- endif %}
        {%- if config.MD5 %}
        md5 "{{config.MD5}}";
        {%- endif %}
        {%- if config.LISTEN %}
        listen 179;
        {%- endif %}
        {%- if config.TTLSECURITY %}
        ttl-security;
        {%- endif %}
    }
{%- endif %}
}
07070100000066000041ED00000000000000000000000264A8D17C00000000000000000000000000000000000000000000002E00000000vrnetlab-git1688785276.5a42305/vr-bgp/example07070100000067000081A400000000000000000000000164A8D17C0000198D000000000000000000000000000000000000003800000000vrnetlab-git1688785276.5a42305/vr-bgp/example/README.mdvr-bgp example
==============
This is an example showing how vr-bgp can be used in your CI environment to
verify your BGP routing policy.

The example makes use of a Juniper vMX router so make sure you have built the
vr-vmx container (we use version 16.1R1.6 but you should be able to use older ones
as well).

`start.sh` runs the docker commands to start vr-vmx, which we call j1, then
start up six vr-bgp instances which will simulate two customers (bgp-cust1 &
bgp-cust2), two peers (bgp-peer1 & bgp-peer2) and two transits (bgp-transit1 &
bgp-transit2). vr-xcon is then used to connect it all together.

`test.py` is the actual test script. It is based on the standard unittest
library in Python but have a couple of different helper functions to glue it
together with the vr-bgp speakers.

The overall policy is fairly simple, we should announce customers to peers &
transit while peers, transit and customers are announced to customers.
Inversely, peers should not be announced to other peers nor to transits. The
different tests in test.py script will test exactly this.

We use the following router-ids:

10.100.0.0/16           router-IDs
        10.100.1.0/24       router-IDs for customers
            10.100.1.1      cust1
            10.100.1.2      cust2
        10.100.2.0/24       router-IDs for peers
            10.100.2.1      peer1
            10.100.2.2      peer2
        10.100.3.0/24       router-IDs for transits
            10.100.3.1      transit1
            10.100.3.2      transit2

And here are the link networks:

10.101.0.0/16               link networks
        10.101.1.0/24           link networks for customers
            10.101.1.0/30       DUT <-> cust1
                10.101.1.1      cust1
                10.101.1.2      DUT
            10.101.1.4/30       DUT <-> cust2
                10.101.1.5      cust2
                10.101.1.6      DUT
        10.101.2.0/24           link networks for peers
            10.101.2.0/30       DUT <-> peer1
                10.101.2.1      peer1
                10.101.2.2      DUT
            10.101.2.4/30       DUT <-> peer2
                10.101.2.5      peer2
                10.101.2.6      DUT
        10.101.3.0/24           link networks for transits
            10.101.3.0/30       DUT <-> transit1
                10.101.3.1      transit1
                10.101.3.2      DUT
            10.101.3.4/30       DUT <-> transit2
                10.101.3.5      transit2
                10.101.3.6      DUT

You need to configure the vMX router yourself. An example configuration is
included in the file junos-config.txt

Start the whole thing by executing the `start.sh` script. If you are not using
vMX 16.1R1.7 you need to first edit the script and change the version of vr-vmx
used. Wait for the vMX router to start (check the serial console). Once up,
apply the configuration and you should be able to see that all BGP sessions
become established;

```
root> show bgp summary
Groups: 6 Peers: 12 Down peers: 6
Table          Tot Paths  Act Paths Suppressed    History Damp State    Pending
inet.0
                       9          7          0          0          0          0
inet6.0
                       0          0          0          0          0          0
Peer                     AS      InPkt     OutPkt    OutQ   Flaps Last Up/Dwn State|#Active/Received/Accepted/Damped...
10.101.1.1            65011         25         27       0       8        9:17 2/3/2/0              0/0/0/0
10.101.1.5            65012         23         29       0       8        9:18 1/2/1/0              0/0/0/0
10.101.2.1            65021         22         25       0       8        9:17 1/1/1/0              0/0/0/0
10.101.2.5            65022         22         25       0       9        9:17 1/1/1/0              0/0/0/0
10.101.3.1            65031         22         24       0       9        9:16 1/1/1/0              0/0/0/0
10.101.3.5            65032         22         24       0       8        9:12 1/1/1/0              0/0/0/0
2001:db8::1:1         65011         24         25       0       7        9:12 Establ
  inet6.0: 0/0/0/0
2001:db8::1:5         65012         25         25       0       7        9:13 Establ
  inet6.0: 0/0/0/0
2001:db8::2:1         65021         24         25       0       6        9:14 Establ
  inet6.0: 0/0/0/0
2001:db8::2:5         65022         23         25       0       7        9:17 Establ
  inet6.0: 0/0/0/0
2001:db8::3:1         65031         24         25       0       6        9:14 Establ
  inet6.0: 0/0/0/0
2001:db8::3:5         65032         24         25       0       7        9:19 Establ
  inet6.0: 0/0/0/0
```

Now run `test.py` and you should get something like this:
```
kll@htpc:~/vrnetlab/vr-bgp/example$ ./test.py
test_bgp101 (__main__.BgpTest)
bgp-cust1 should see bgp-cust2, bgp-peer1, bgp-peer2, bgp-transit1 and bgp-transit2 ... '12.0.0.0/24' not found in {}, Retrying in 3 seconds...
ok
test_bgp102 (__main__.BgpTest)
bgp-cust2 should see bgp-cust1, bgp-peer1, bgp-peer2, bgp-transit1 and bgp-transit2 ... ok
test_bgp103 (__main__.BgpTest)
bgp-peer1 should see bgp-cust1, bgp-cust2 ... ok
test_bgp104 (__main__.BgpTest)
bgp-peer2 should see bgp-cust1, bgp-cust2 ... ok
test_bgp105 (__main__.BgpTest)
bgp-transit1 should see bgp-cust1, bgp-cust2 ... ok
test_bgp106 (__main__.BgpTest)
bgp-transit2 should see bgp-cust1, bgp-cust2 ... ok
test_bgp201 (__main__.BgpTest)
peer1 should not see peer2, transit1, transit2 ... ok
test_bgp202 (__main__.BgpTest)
peer2 should not see peer1, transit1, transit2 ... ok
test_bgp203 (__main__.BgpTest)
transit1 should not see peer1, peer2, transit2 ... ok
test_bgp204 (__main__.BgpTest)
transit2 should not see peer1, peer2, transit1 ... ok
test_bgp205 (__main__.BgpTest)
customer bogon filtering, peer1 should not see customer1 bogon ... ok
test_bgp206 (__main__.BgpTest)
peer1 should not see cust1 prefix with control community ... ok

----------------------------------------------------------------------
Ran 12 tests in 5.743s

OK
kll@htpc:~/vrnetlab/vr-bgp/example$
```

We can see that the first test fails which can be rather common as BGP has not
converged yet. Each test is automatically retried up to 10 times with an
exponential back off timer. The tests are ordered such that "positive" tests,
that look for the presence of a prefix, come first while "negative" tests that
look for lack of prefixes come after. The positive tests will be retried until
BGP has converged and we can then be sure about the result of the negative
tests too.
07070100000068000081A400000000000000000000000164A8D17C000018EC000000000000000000000000000000000000003F00000000vrnetlab-git1688785276.5a42305/vr-bgp/example/junos-config.txt## Last commit: 2016-10-18 08:50:29 UTC by root
version 16.1R1.7;
system {
    root-authentication {
        encrypted-password "$5$y1GgXR4r$Z5xvMJ1Qq7ENI3l0i.YPZtvobXNeVp/8Fm5JM/RYN/C"; ## SECRET-DATA
    }
    login {
        user vrnetlab {
            uid 2000;
            class super-user;
            authentication {
                encrypted-password "$5$gnMDemJ9$9qSEMg/hZIdgIT8LFipKY8nNvhU3402O9UeVBDMNMs8"; ## SECRET-DATA
            }
        }
    }
    services {
        ssh;
        netconf {
            ssh;
            rfc-compliant;
        }
    }
    syslog {
        user * {
            any emergency;
        }
        file messages {
            any notice;
            authorization info;
        }
        file interactive-commands {
            interactive-commands any;
        }
    }
}
interfaces {
    ge-0/0/0 {
        description bgp-cust1;
        unit 0 {
            family inet {
                address 10.101.1.2/30;
            }
            family inet6 {
                address 2001:db8::1:2/126;
            }
        }
    }
    ge-0/0/1 {
        description bgp-cust2;
        unit 0 {
            family inet {
                address 10.101.1.6/30;
            }
            family inet6 {
                address 2001:db8::1:6/126;
            }
        }
    }
    ge-0/0/2 {
        description bgp-peer1;
        unit 0 {
            family inet {
                address 10.101.2.2/30;
            }
            family inet6 {
                address 2001:db8::2:2/126;
            }
        }
    }
    ge-0/0/3 {
        description bgp-peer2;
        unit 0 {
            family inet {
                address 10.101.2.6/30;
            }
            family inet6 {
                address 2001:db8::2:6/126;
            }
        }
    }
    ge-0/0/4 {
        description bgp-transit1;
        unit 0 {
            family inet {
                address 10.101.3.2/30;
            }
            family inet6 {
                address 2001:db8::3:2/126;
            }
        }
    }
    ge-0/0/5 {
        description bgp-transit2;
        unit 0 {
            family inet {
                address 10.101.3.6/30;
            }
            family inet6 {
                address 2001:db8::3:6/126;
            }
        }
    }
    fxp0 {
        unit 0 {
            family inet {
                address 10.0.0.15/24;
            }
        }
    }
}
routing-options {
    router-id 1.2.3.4;
    autonomous-system 2792;
}
protocols {
    bgp {
        group IPV4-CUSTOMERS {
            import IPV4-CUSTOMER-IN;
            family inet {
                unicast;
            }
            export IPV4-CUSTOMER-OUT;
            neighbor 10.101.1.1 {
                peer-as 65011;
            }
            neighbor 10.101.1.5 {
                peer-as 65012;
            }
        }
        group IPV4-PEERS {
            import IPV4-PEER-IN;
            family inet {
                unicast;
            }
            export IPV4-PEER-OUT;
            neighbor 10.101.2.1 {
                peer-as 65021;
            }
            neighbor 10.101.2.5 {
                peer-as 65022;
            }
        }
        group IPV4-TRANSITS {
            import IPV4-TRANSIT-IN;
            family inet {
                unicast;
            }
            export IPV4-TRANSIT-OUT;
            neighbor 10.101.3.1 {
                peer-as 65031;
            }
            neighbor 10.101.3.5 {
                peer-as 65032;
            }
        }
        group IPV6-CUSTOMERS {
            family inet6 {
                unicast;
            }
            neighbor 2001:db8::1:1 {
                peer-as 65011;
            }
            neighbor 2001:db8::1:5 {
                peer-as 65012;
            }
        }
        group IPV6-PEERS {
            family inet6 {
                unicast;
            }
            neighbor 2001:db8::2:1 {
                peer-as 65021;
            }
            neighbor 2001:db8::2:5 {
                peer-as 65022;
            }
        }
        group IPV6-TRANSITS {
            family inet6 {
                unicast;
            }
            neighbor 2001:db8::3:1 {
                peer-as 65031;
            }
            neighbor 2001:db8::3:5 {
                peer-as 65032;
            }
        }
    }
}
policy-options {
    prefix-list IPV4-BOGONS {
        10.0.0.0/8;
        192.168.0.0/16;
    }
    policy-statement IPV4-CUSTOMER-IN {
        term BOGONS {
            from {
                prefix-list-filter IPV4-BOGONS orlonger;
            }
            then reject;
        }
        term MARK {
            then {
                community add FROM-CUSTOMER;
            }
        }
    }
    policy-statement IPV4-CUSTOMER-OUT {
        term ANNOUNCE {
            from community [ FROM-CUSTOMER FROM-TRANSIT FROM-PEER ];
            then accept;
        }
        term REJECT {
            then reject;
        }
    }
    policy-statement IPV4-PEER-IN {
        term CLEAN-COMMUNITY {
            then {
                community delete CLEAN-COMMUNITY;
                next term;
            }
        }
        term MARK {
            then {
                local-preference 250;
                community add FROM-PEER;
            }
        }
    }
    policy-statement IPV4-PEER-OUT {
        term DO-NOT-ANNOUNCE {
            from community DO-NOT-ANNOUNCE;
            then reject;
        }
        term ANNOUNCE {
            from community FROM-CUSTOMER;
            then accept;
        }
        term REJECT {
            then reject;
        }
    }
    policy-statement IPV4-TRANSIT-IN {
        term CLEAN-COMMUNITY {
            then {
                community delete CLEAN-COMMUNITY;
                next term;
            }
        }
        term MARK {
            then {
                local-preference 150;
                community add FROM-TRANSIT;
            }
        }
    }
    policy-statement IPV4-TRANSIT-OUT {
        term ANNOUNCE {
            from community FROM-CUSTOMER;
            then accept;
        }
        term REJECT {
            then reject;
        }
    }
    community CLEAN-COMMUNITY members 2792:*;
    community DO-NOT-ANNOUNCE members 65000:0;
    community FROM-CUSTOMER members 2792:10300;
    community FROM-PEER members 2792:10200;
    community FROM-TRANSIT members 2792:10201;
}
07070100000069000081ED00000000000000000000000164A8D17C00000621000000000000000000000000000000000000003700000000vrnetlab-git1688785276.5a42305/vr-bgp/example/start.sh# start vMX virtual router
docker run --name j --privileged -i -t -d vr-vmx:16.1R1.7

# start vr-bgp and vr-xcon to connect it all together
docker rm -f bgp-cust1 bgp-cust2 bgp-peer1 bgp-peer2 bgp-transit1 bgp-transit2 bgp-xcon
docker run --name bgp-cust1 --privileged -i -t -d vr-bgp --router-id 10.100.1.1 --ipv4-prefix 10.101.1.0/30 --ipv6-prefix 2001:db8::1:0/126 --local-as 65011 --peer-as 2792
docker run --name bgp-cust2 --privileged -i -t -d vr-bgp --router-id 10.100.1.2 --ipv4-prefix 10.101.1.4/30 --ipv6-prefix 2001:db8::1:4/126 --local-as 65012 --peer-as 2792
docker run --name bgp-peer1 --privileged -i -t -d vr-bgp --router-id 10.100.2.1 --ipv4-prefix 10.101.2.0/30 --ipv6-prefix 2001:db8::2:0/126 --local-as 65021 --peer-as 2792
docker run --name bgp-peer2 --privileged -i -t -d vr-bgp --router-id 10.100.2.2 --ipv4-prefix 10.101.2.4/30 --ipv6-prefix 2001:db8::2:4/126 --local-as 65022 --peer-as 2792
docker run --name bgp-transit1 --privileged -i -t -d vr-bgp --router-id 10.100.3.1 --ipv4-prefix 10.101.3.0/30 --ipv6-prefix 2001:db8::3:0/126 --local-as 65031 --peer-as 2792
docker run --name bgp-transit2 --privileged -i -t -d vr-bgp --router-id 10.100.3.2 --ipv4-prefix 10.101.3.4/30 --ipv6-prefix 2001:db8::3:4/126 --local-as 65032 --peer-as 2792
docker run --name bgp-xcon --privileged -i -t -d --link bgp-cust1 --link bgp-cust2 --link bgp-peer1 --link bgp-peer2 --link bgp-transit1 --link bgp-transit2 --link j1 vr-xcon --p2p j1/1--bgp-cust1/1 j1/2--bgp-cust2/1 j1/3--bgp-peer1/1 j1/4--bgp-peer2/1 j1/5--bgp-transit1/1 j1/6--bgp-transit2/1 --debug
0707010000006A000081ED00000000000000000000000164A8D17C00002F28000000000000000000000000000000000000003600000000vrnetlab-git1688785276.5a42305/vr-bgp/example/test.py#!/usr/bin/env python3

import datetime
import json
import logging
import sys
import time
import unittest
import urllib.request
from functools import wraps

all_speakers = [
	'bgp-cust1',
	'bgp-cust2',
	'bgp-peer1',
	'bgp-peer2',
	'bgp-transit1',
	'bgp-transit2'
]
speaker_containers = {}

def retry(ExceptionToCheck, tries=4, delay=3, backoff=2, logger=None):
    """Retry calling the decorated function using an exponential backoff.

http://www.saltycrane.com/blog/2009/11/trying-out-retry-decorator-python/
    original from: http://wiki.python.org/moin/PythonDecoratorLibrary#Retry

:param ExceptionToCheck: the exception to check. may be a tuple of
        exceptions to check
    :type ExceptionToCheck: Exception or tuple
    :param tries: number of times to try (not retry) before giving up
    :type tries: int
    :param delay: initial delay between retries in seconds
    :type delay: int
    :param backoff: backoff multiplier e.g. value of 2 will double the delay
        each retry
    :type backoff: int
    :param logger: logger to use. If None, print
    :type logger: logging.Logger instance
    """
    def deco_retry(f):

@wraps(f)
        def f_retry(*args, **kwargs):
            mtries, mdelay = tries, delay
            while mtries > 1:
                try:
                    return f(*args, **kwargs)
                except ExceptionToCheck as e:
                    msg = "%s, Retrying in %d seconds..." % (str(e), mdelay)
                    if logger:
                        logger.warning(msg)
                    else:
                        print(msg)
                    time.sleep(mdelay)
                    mtries -= 1
                    mdelay *= backoff
            return f(*args, **kwargs)

return f_retry  # true decorator

return deco_retry

def docker_inspect(name):
    """ Return inspection information about a running docker container
    """
    container_name = speaker_containers[name]
    if not container_name:
        raise Exception("Couldn't map %s" % name)
    import subprocess
    out = subprocess.check_output(["docker", "inspect", container_name])
    return json.loads(out.decode())

def docker_ip(name):
    """ Return IP address of docker container
    """
    return docker_inspect(name)[0]['NetworkSettings']['IPAddress']

def announce(speaker, routes):
    ip = docker_ip(speaker)
    route_data = { 'routes': routes }
    params = json.dumps(route_data).encode()
    url = "http://%s:5000/announce" % ip
    req = urllib.request.Request(url, data=params, headers={'content-type': 'application/json'})
    response = urllib.request.urlopen(req)

def received(speaker, afi='ipv4 unicast'):
    ip = docker_ip(speaker)
    url = "http://%s:5000/received" % ip
    response = urllib.request.urlopen(url)
    data = json.loads(response.read().decode())
    if afi not in data:
        return {}
    afi_data = data[afi]
    return afi_data

def get_neighbors(speaker):
    ip = docker_ip(speaker)
    url = "http://%s:5000/neighbors" % ip
    response = urllib.request.urlopen(url)
    return json.loads(response.read().decode())

def wait_for_speakers(speakers, timeout=300):
    """ Wait for BGP speakers to start
    """
    log = logging.getLogger()
    i = 0
    while i < timeout:
        # assume up until proven otherwise
        all_up = True
        for speaker in speakers:
            try:
                neighbors = get_neighbors(speaker)
            except:
                log.debug("BGP speaker %s not up" % speaker)
                all_up = False
                break

if all_up:
            log.debug("All speakers are up!")
            return

time.sleep(1)
        i += 1
    raise Exception("timed out")

def wait_for_bgp(speakers, timeout=300):
    """ Wait for all BGP speakers to establish their BGP sessions
    """
    log = logging.getLogger()
    i = 0
    while i < timeout:
        # assume up until proven otherwise
        all_up = True
        for speaker in speakers:
            try:
                neighbors = get_neighbors(speaker)
            except:
                log.debug("BGP speaker %s not up" % speaker)
                all_up = False
                break

if len(neighbors) == 0:
                all_up = False
            for neighbor, data in neighbors.items():
                if data['state'] != 'up':
                    log.debug("BGP speaker %s session not up" % speaker)
                    all_up = False
                else:
                    # convert timestamp to datetime object
                    ts = datetime.datetime.strptime(data['timestamp'], "%Y-%m-%d %H:%M:%S")
                    # what is delta between now and when peer came up?
                    delta = datetime.datetime.utcnow() - ts
                    # peer must be up for 10 seconds to let it "settle"
                    if delta < datetime.timedelta(seconds=5):
                        log.debug("BGP speaker %s session not up long enough" % speaker)
                        all_up = False
        if all_up:
            log.debug("All BGP speaker sessions are up!")
            return

time.sleep(1)
        i += 1
    raise Exception("timed out")

class BgpTest(unittest.TestCase):
    def setUp(self):
        # wait for bgp sessions to establish
        wait_for_speakers(all_speakers)

# tell vr-bgp speakers to announce routes

# customer announcements
        cust1_announce = [
                { 'prefix': '11.0.0.0/24' }, # normal
                { 'prefix': '11.1.0.0/24', 'community': [ '65000:0' ] }, # do not announce to peers/transit
                { 'prefix': '10.0.11.0/24' } # 10.0.11.0/24 is BOGON and should be filtered
            ]

announce('bgp-cust1', cust1_announce)
        cust2_announce = [
                { 'prefix': '12.0.0.0/24' },
                { 'prefix': '10.0.12.0/24' }
            ]
        announce('bgp-cust2', cust2_announce)

# peer announcements
        peer1_announce = [
                { 'prefix': '21.0.0.0/24', 'community': [ '2792:10300' ] } # fake we are customer - must be stripped
            ]
        announce('bgp-peer1', peer1_announce)
        peer2_announce = [
                { 'prefix': '22.0.0.0/24' }
            ]
        announce('bgp-peer2', peer2_announce)

# transit announcements
        tran1_announce = [
                { 'prefix': '31.0.0.0/24', 'community': [ '2792:10300'] } # fake we are customer - must be stripped
            ]
        announce('bgp-transit1', tran1_announce)
        tran2_announce = [
                { 'prefix': '32.0.0.0/24' }
            ]
        announce('bgp-transit2', tran2_announce)

wait_for_bgp(all_speakers)

# start off with "positive" tests, i.e. where we check for the presence of
    # prefixes. see test_bgp2xx for "negative" tests

@retry(AssertionError, tries=10)
    def test_bgp101(self):
        """ bgp-cust1 should see bgp-cust2, bgp-peer1, bgp-peer2, bgp-transit1 and bgp-transit2
        """
        rec = received('bgp-cust1')
        self.assertIn('12.0.0.0/24', rec)
        self.assertIn('21.0.0.0/24', rec)
        self.assertIn('22.0.0.0/24', rec)
        self.assertIn('31.0.0.0/24', rec)
        self.assertIn('32.0.0.0/24', rec)

@retry(AssertionError, tries=10)
    def test_bgp102(self):
        """ bgp-cust2 should see bgp-cust1, bgp-peer1, bgp-peer2, bgp-transit1 and bgp-transit2
        """
        rec = received('bgp-cust2')
        self.assertIn('11.0.0.0/24', rec)
        self.assertIn('21.0.0.0/24', rec)
        self.assertIn('22.0.0.0/24', rec)
        self.assertIn('31.0.0.0/24', rec)
        self.assertIn('32.0.0.0/24', rec)

@retry(AssertionError, tries=10)
    def test_bgp103(self):
        """ bgp-peer1 should see bgp-cust1, bgp-cust2
        """
        rec = received('bgp-peer1')
        self.assertIn('11.0.0.0/24', rec)
        self.assertIn('12.0.0.0/24', rec)

@retry(AssertionError, tries=10)
    def test_bgp104(self):
        """ bgp-peer2 should see bgp-cust1, bgp-cust2
        """
        rec = received('bgp-peer2')
        self.assertIn('11.0.0.0/24', rec)
        self.assertIn('12.0.0.0/24', rec)

@retry(AssertionError, tries=10)
    def test_bgp105(self):
        """ bgp-transit1 should see bgp-cust1, bgp-cust2
        """
        rec = received('bgp-transit1')
        self.assertIn('11.0.0.0/24', rec)
        self.assertIn('12.0.0.0/24', rec)

@retry(AssertionError, tries=10)
    def test_bgp106(self):
        """ bgp-transit2 should see bgp-cust1, bgp-cust2
        """
        rec = received('bgp-transit2')
        self.assertIn('11.0.0.0/24', rec)
        self.assertIn('12.0.0.0/24', rec)

# "negative" tests (i.e. we don't see a particular prefix) are run after,
    # to make sure we don't catch the peers in the early phases when they
    # haven't announced everything

@retry(AssertionError, tries=10)
    def test_bgp201(self):
        """ peer1 should not see peer2, transit1, transit2
        """
        rec = received('bgp-peer1')
        self.assertNotIn('22.0.0.0/24', rec)
        self.assertNotIn('31.0.0.0/24', rec)
        self.assertNotIn('32.0.0.0/24', rec)

@retry(AssertionError, tries=10)
    def test_bgp202(self):
        """ peer2 should not see peer1, transit1, transit2
        """
        rec = received('bgp-peer2')
        self.assertNotIn('21.0.0.0/24', rec)
        self.assertNotIn('31.0.0.0/24', rec)
        self.assertNotIn('32.0.0.0/24', rec)

@retry(AssertionError, tries=10)
    def test_bgp203(self):
        """ transit1 should not see peer1, peer2, transit2
        """
        rec = received('bgp-transit1')
        self.assertNotIn('21.0.0.0/24', rec)
        self.assertNotIn('22.0.0.0/24', rec)
        self.assertNotIn('32.0.0.0/24', rec)

@retry(AssertionError, tries=10)
    def test_bgp204(self):
        """ transit2 should not see peer1, peer2, transit1
        """
        rec = received('bgp-transit2')
        self.assertNotIn('21.0.0.0/24', rec)
        self.assertNotIn('22.0.0.0/24', rec)
        self.assertNotIn('31.0.0.0/24', rec)

@retry(AssertionError, tries=10)
    def test_bgp205(self):
        """ customer bogon filtering, peer1 should not see customer1 bogon
        """
        rec = received('bgp-peer1')
        self.assertNotIn('10.0.11.0/24', rec)

@retry(AssertionError, tries=10)
    def test_bgp206(self):
        """ peer1 should not see cust1 prefix with control community
        """
        rec = received('bgp-peer1')
        self.assertNotIn('11.1.0.0/24', rec)

if __name__ == '__main__':
    import argparse
    parser = argparse.ArgumentParser(description='')
    parser.add_argument('--debug', action='store_true')
    parser.add_argument('--wait-for-speakers', action='store_true')
    parser.add_argument('--wait-for-bgp-up', action='store_true')
    parser.add_argument('--bgp-cust1', default="bgp-cust1")
    parser.add_argument('--bgp-cust2', default="bgp-cust2")
    parser.add_argument('--bgp-peer1', default="bgp-peer1")
    parser.add_argument('--bgp-peer2', default="bgp-peer2")
    parser.add_argument('--bgp-transit1', default="bgp-transit1")
    parser.add_argument('--bgp-transit2', default="bgp-transit2")
    args, rest = parser.parse_known_args()

speaker_containers['bgp-peer1'] = args.bgp_peer1
    speaker_containers['bgp-peer2'] = args.bgp_peer2
    speaker_containers['bgp-cust1'] = args.bgp_cust1
    speaker_containers['bgp-cust2'] = args.bgp_cust2
    speaker_containers['bgp-transit1'] = args.bgp_transit1
    speaker_containers['bgp-transit2'] = args.bgp_transit2

# set up logging
    log = logging.getLogger()
    logging.basicConfig()
    log.setLevel(logging.INFO)

if args.debug:
        log.setLevel(logging.DEBUG)

if args.wait_for_speakers:
        wait_for_speakers(all_speakers)
        sys.exit(0)

if args.wait_for_bgp_up:
        wait_for_bgp(all_speakers)
        sys.exit(0)

sys.argv[1:] = rest

unittest.main(verbosity=2)
0707010000006B000081A400000000000000000000000164A8D17C00000B0D000000000000000000000000000000000000003C00000000vrnetlab-git1688785276.5a42305/vr-bgp/example/xr-config.txtinterface GigabitEthernet0/0/0/0
 description bgp-cust1
 ipv4 address 10.101.1.2 255.255.255.252
!
interface GigabitEthernet0/0/0/1
 description bgp-cust2
 ipv4 address 10.101.1.6 255.255.255.252
!
interface GigabitEthernet0/0/0/2
 description bgp-peer1
 ipv4 address 10.101.2.2 255.255.255.252
!
interface GigabitEthernet0/0/0/3
 description bgp-peer2
 ipv4 address 10.101.2.6 255.255.255.252
!
interface GigabitEthernet0/0/0/4
 description bgp-transit1
 ipv4 address 10.101.3.2 255.255.255.252
!
interface GigabitEthernet0/0/0/5
 description bgp-transit2
 ipv4 address 10.101.3.6 255.255.255.252
!

prefix-set IPV4-BOGONS
 10.0.0.0/8 le 32
end-set

!
! == INCOMING policies ==
!
# mark with peer community (2792:10200)
route-policy IPV4-PEER-IN
  set community (2792:10200)
  set local-preference 250
  done
end-policy
!
# mark with transit community (2792:10201)
route-policy IPV4-TRANSIT-IN
  set community (2792:10201)
  set local-preference 200
  done
end-policy
!
# mark with customer community (2792:10300)
route-policy IPV4-CUSTOMER-IN
  if (destination in IPV4-BOGONS) then
    drop
  endif
  set community (2792:10300)
  set local-preference 350
  done
end-policy
!

!
! == OUTGOING policies ==
!
# announce customers (2792:10300) to peers
route-policy IPV4-PEER-OUT
  if (community matches-any (2792:10300)) then
    done
  endif
  drop
end-policy
!
# announce customers (2792:10300) to transit
route-policy IPV4-TRANSIT-OUT
  if (community matches-any (2792:10300)) then
    done
  endif
  drop
end-policy
!
# to customers we announce peers (10200), transits (10201) and other customers (10300)
route-policy IPV4-CUSTOMER-OUT
  if (community matches-any (2792:10200, 2792:10201, 2792:10300)) then
    done
  endif
  drop
end-policy
!

router bgp 2792
 address-family ipv4 unicast
 !
 neighbor 10.101.1.1
  remote-as 65011
  description bgp-cust1
  address-family ipv4 unicast
   route-policy IPV4-CUSTOMER-IN in
   route-policy IPV4-CUSTOMER-OUT out
  !
 !
 neighbor 10.101.1.5
  remote-as 65012
  description bgp-cust2
  address-family ipv4 unicast
   route-policy IPV4-CUSTOMER-IN in
   route-policy IPV4-CUSTOMER-OUT out
  !
 !
 neighbor 10.101.2.1
  remote-as 65021
  description bgp-peer1
  address-family ipv4 unicast
   route-policy IPV4-PEER-IN in
   route-policy IPV4-PEER-OUT out
  !
 !
 neighbor 10.101.2.5
  remote-as 65022
  description bgp-peer2
  address-family ipv4 unicast
   route-policy IPV4-PEER-IN in
   route-policy IPV4-PEER-OUT out
  !
 !
 neighbor 10.101.3.1
  remote-as 65031
  description bgp-transit1
  address-family ipv4 unicast
   route-policy IPV4-TRANSIT-IN in
   route-policy IPV4-TRANSIT-OUT out
  !
 !
 neighbor 10.101.3.5
  remote-as 65032
  description bgp-transit2
  address-family ipv4 unicast
   route-policy IPV4-TRANSIT-IN in
   route-policy IPV4-TRANSIT-OUT out
  !
 !
!
0707010000006C000081ED00000000000000000000000164A8D17C00001EC5000000000000000000000000000000000000003000000000vrnetlab-git1688785276.5a42305/vr-bgp/vr-bgp.py#!/usr/bin/env python3

import ipaddress
import logging
import os
import signal
import subprocess
import sys
import time

import jinja2

def handle_SIGCHLD(signal, frame):
    os.waitpid(-1, os.WNOHANG)

def handle_SIGTERM(signal, frame):
    sys.exit(0)

signal.signal(signal.SIGINT, handle_SIGTERM)
signal.signal(signal.SIGTERM, handle_SIGTERM)
signal.signal(signal.SIGCHLD, handle_SIGCHLD)

def calculate_ip_addressing(input_net, man_address, man_next_hop):
    """ Calculate IP addressing (address, neighbor, default route) on the specified interface

This function is AFI agnostic, just feed it ipaddress objects.

:param input_net: the IPv4/IPv6 network to use
        :param man_address: optional override for the host address
        :param man_next_hop: optional override for default route
        :return: tuple of (local_address, neighbor, next_hop, prefixlen)
    """
    net = ipaddress.ip_network(input_net)
    if net.prefixlen == (net.max_prefixlen-1):
        address = net[0]
        neighbor = net[1]
        next_hop = net[1]
    else:
        address = net[1]
        neighbor = net[2]
        next_hop = net[2]

# override default options
    if man_address:
        if ipaddress.ip_address(man_address) not in net:
            print("local address {} not in network {}".format(man_address, net), file=sys.stderr)
            sys.exit(1)
        address = ipaddress.ip_address(man_address)

if man_next_hop:
        if ipaddress.ip_address(man_next_hop) not in net:
            print("next-hop address {} not in network {}".format(man_next_hop, net), file=sys.stderr)
            sys.exit(1)
        next_hop = ipaddress.ip_address(man_next_hop)

# sanity checks
    if next_hop == address:
        print("default route next-hop address ({}) can not be the same as the local address ({})".format(next_hop, address), file=sys.stderr)
        sys.exit(1)

print("network: {}  using address: {}".format(net, address))

return str(address), str(neighbor), str(next_hop), net.prefixlen

if __name__ == '__main__':
    import argparse
    parser = argparse.ArgumentParser(description='')
    parser.add_argument('--debug', action="store_true", help='enable debug')
    parser.add_argument('--ipv4-local-address', help='local address or route table will be used')
    parser.add_argument('--ipv4-neighbor', help='IP address of the neighbor')
    parser.add_argument('--ipv4-prefix', help='IP prefix to configure on the link')
    parser.add_argument('--ipv4-next-hop', help='next-hop address for IPv4 default route')
    parser.add_argument('--ipv6-local-address', help='local address or route table will be used')
    parser.add_argument('--ipv6-neighbor', help='IP address of the neighbor')
    parser.add_argument('--ipv6-prefix', help='IP prefix to configure on the link')
    parser.add_argument('--ipv6-next-hop', help='next-hop address for IPv6 default route')
    parser.add_argument('--allow-mixed-afi-transport', action='store_true', help='do not limit announced prefixes to neighbor AFI')
    parser.add_argument('--listen', action="store_true", default=False, help='listen to incoming TCP connections')
    parser.add_argument('--local-as', required=True, help='local AS')
    parser.add_argument('--router-id', required=True, help='our router-id')
    parser.add_argument('--peer-as', required=True, help='peer AS')
    parser.add_argument('--md5', help='MD5')
    parser.add_argument('--trace', action='store_true', help='enable trace level logging')
    parser.add_argument('--vlan', type=int, help='VLAN ID to use')
    parser.add_argument('--ttl-security', action="store_true", help='Enable TTL security')
    args = parser.parse_args()

LOG_FORMAT = "%(asctime)s: %(module)-10s %(levelname)-8s %(message)s"
    logging.basicConfig(format=LOG_FORMAT)
    logger = logging.getLogger()
    logger.setLevel(logging.INFO)
    if args.debug:
        logger.setLevel(logging.DEBUG)

config = {
        'IPV4_NEIGHBOR': None,
        'IPV6_NEIGHBOR': None,
        'IPV4_LOCAL_ADDRESS': None,
        'IPV6_LOCAL_ADDRESS': None,
        'LISTEN': args.listen,
        'LOCAL_AS': args.local_as,
        'PEER_AS': args.peer_as,
        'ROUTER_ID': args.router_id or '192.0.2.255',
        'MD5': args.md5,
        'INTERFACE': 'tap0',
        'INTERFACE_VLAN': None,
        'ALLOW_MIXED_AFI_TRANSPORT': args.allow_mixed_afi_transport,
        'TTLSECURITY': args.ttl_security
    }

if args.vlan:
        vlan_intf = "tap0.{}".format(args.vlan)
        config['INTERFACE'] = vlan_intf
        config['INTERFACE_PHY'] = 'tap0'
        config['INTERFACE_VLAN'] = args.vlan

if args.ipv4_prefix:
        config['IPV4_LOCAL_ADDRESS'], config['IPV4_NEIGHBOR'], config['IPV4_NEXT_HOP'], config['IPV4_PREFIXLEN'] = \
            calculate_ip_addressing(args.ipv4_prefix,
                                    args.ipv4_local_address,
                                    args.ipv4_next_hop)

if args.ipv4_neighbor:
            config['IPV4_NEIGHBOR'] = args.ipv4_neighbor

else:
        if args.ipv4_neighbor:
            print("--ipv4-neighbor requires --ipv4-prefix to be specified", file=sys.stderr)
            sys.exit(1)

if args.ipv4_next_hop:
            print("--ipv4-next-hop requires --ipv4-prefix to be specified", file=sys.stderr)
            sys.exit(1)

if args.ipv4_local_address:
            print("--ipv4-local-address requires --ipv4-prefix to be specified", file=sys.stderr)
            sys.exit(1)

if args.ipv6_prefix:
        config['IPV6_LOCAL_ADDRESS'], config['IPV6_NEIGHBOR'], config['IPV6_NEXT_HOP'], config['IPV6_PREFIXLEN'] = \
            calculate_ip_addressing(args.ipv6_prefix,
                                    args.ipv6_local_address,
                                    args.ipv6_next_hop)

if args.ipv6_neighbor:
            config['IPV6_NEIGHBOR'] = args.ipv6_neighbor

else:
        if args.ipv6_neighbor:
            print("--ipv6-neighbor requires --ipv6-prefix to be specified", file=sys.stderr)
            sys.exit(1)

if args.ipv6_next_hop:
            print("--ipv6-next-hop requires --ipv6-prefix to be specified", file=sys.stderr)
            sys.exit(1)

if args.ipv6_local_address:
            print("--ipv6-local-address requires --ipv6-prefix to be specified", file=sys.stderr)
            sys.exit(1)

# start vr-xcon & configure ip addressing
    if not os.path.exists("/dev/net/tun"):
        print("No TUN device - make sure you run the container with --privileged", file=sys.stderr)
        sys.exit(1)

# start tcp2tap to listen on incoming TCP. vr-xcon will then connect us to
    # the virtual router
    xcon_params = ["/xcon.py", "--tap-listen", "1"]
    # if there is an address configured for v4/v6, pass it to xcon
    for af in (4, 6):
        if config["IPV{}_LOCAL_ADDRESS".format(af)]:
            address = "{}/{}".format(config["IPV{}_LOCAL_ADDRESS".format(af)], config["IPV{}_PREFIXLEN".format(af)])
            xcon_params.extend(("--ipv{}-address".format(af), address))
            xcon_params.extend(("--ipv{}-route".format(af), config["IPV{}_NEXT_HOP".format(af)]))
    if args.vlan:
        xcon_params.extend(("--vlan", str(args.vlan)))
    t2t = subprocess.Popen(xcon_params)

# generate exabgp config using Jinja2 template
    env = jinja2.Environment(loader=jinja2.FileSystemLoader(['/']))
    template = env.get_template("/exabgp.conf.tpl")
    exa_config = open("/exabgp.conf", "w")
    exa_config.write(template.render(config=config))
    exa_config.close()
    # start exabgp
    exap = subprocess.Popen(["exabgp", "/exabgp.conf"])
    while True:
        if exap.poll() == 0:
            print("exabgp stopped, restarting in 2s")
            time.sleep(2)
            exap = subprocess.Popen(["exabgp", "/exabgp.conf"])
        time.sleep(1)
0707010000006D000041ED00000000000000000000000264A8D17C00000000000000000000000000000000000000000000002700000000vrnetlab-git1688785276.5a42305/vr-xcon0707010000006E000081A400000000000000000000000164A8D17C00000446000000000000000000000000000000000000003200000000vrnetlab-git1688785276.5a42305/vr-xcon/DockerfileFROM debian:bullseye AS build
MAINTAINER Kristian Larsson <kristian@spritelink.net>

ENV DEBIAN_FRONTEND=noninteractive

RUN apt-get update -qy \
 && apt-get upgrade -qy \
 && apt-get install -y \
    gnupg \
    wget \
 && wget -q -O - https://apt.acton-lang.io/acton.gpg | apt-key add - \
 && echo "deb [arch=amd64] http://apt.acton-lang.io/ bullseye main" >> /etc/apt/sources.list.d/acton.list \
 && apt-get update \
 && apt-get install -qy acton \
 && rm -rf /var/lib/apt/lists/*

COPY xcon.act /xcon.act
RUN actonc /xcon.act

FROM debian:bullseye
MAINTAINER Kristian Larsson <kristian@spritelink.net>

ENV DEBIAN_FRONTEND=noninteractive

RUN apt-get update -qy \
 && apt-get upgrade -qy \
 && apt-get install -y \
    bridge-utils \
    iproute2 \
    python3-ipy \
    tcpdump \
    telnet \
 && rm -rf /var/lib/apt/lists/*

ADD xcon.py /

COPY --from=build /xcon /xcon

# The first line in the health file is the exit code: 0 or 1. The following lines are the output message
HEALTHCHECK --interval=5s --start-period=1s CMD sed 1d /health; exit `head -n1 /health`
ENTRYPOINT ["/xcon.py"]
0707010000006F000081A400000000000000000000000164A8D17C00000170000000000000000000000000000000000000003000000000vrnetlab-git1688785276.5a42305/vr-xcon/Makefile-include ../makefile-sanity.include

all:
	docker build --build-arg http_proxy=$(http_proxy) --build-arg https_proxy=$(https_proxy) -t $(REGISTRY)vr-xcon .

docker-push:
	docker push $(REGISTRY)vr-xcon

docker-test:
	@echo "TODO: implement smoke test"

docker-test-clean:
	@echo "TODO: implement smoke test"

docker-test-save-logs:
	@echo "TODO: implement smoke test"
07070100000070000081A400000000000000000000000164A8D17C00001DA5000000000000000000000000000000000000003100000000vrnetlab-git1688785276.5a42305/vr-xcon/README.mdvrnetlab xcon
=============
This is the vrnetlab docker image of xcon - the cross-connect app.

vr-xcon is used to connect two or more vrnetlab containers with each other.

Modes of operation
------------------

### TcpBridge
All vrnetlab routers are run by qemu which expose the router interfaces via TCP
ports and vr-xcon connects these together. It can be seen as an overlay. The
underlying TCP ports exposed by qemu listen on the docker0 interface (per
default) of each container but as long as two vrnetlab containers have
connectivity via their default network, vr-xcon should be able to perform it's
job.

### Tcp2Tap
vr-xcon also provides a mode to interconnect the TCP-socket exposed by qemu to
a local tap interface, which makes it easy to use other apps together with
vrnetlab router containers. Run vr-xcon with `--tap-listen INTERFACE` to listen
to a port - the mapping is the same as for other vrnetlab routers, i.e.
INTERFACE=1 will mean it listens on TCP port 10001 and this makes it easy to
interconnect using vr-xcon. See vr-bgp for an example of how `--tap-listen` can
be used in real life.

In this mode, vr-xcon can also be used to configure IP addressing of the local
tap interface. This includes setting an IPv4/IPv6 address, default route and VLAN ID.

Building the docker image
-------------------------
The vr-xcon container image is available from Docker Hub as vrnetlab/vr-xcon,
so unless you have done local modifications, there is no real need to build
your own container.

Nevertheless, run `make` to build your own container image. The resulting image
will be called 'vr-xcon'. The environment variable REGISTRY can be set to give
the resulting image a prefix, for example by setting registry to
'registry.example.com:1234' the resulting image will be called
'registry.example.com:1234/vr-xcon' and can then be pushed to the registry
through `docker push`.

Usage
-----

### TcpBridge mode
To connect the first interface of vr1 and vr2 and the second interface of vr1
with the first of vr3, run:
```
docker run -d --privileged --name vr-xcon --link vr1 --link vr2 --link vr3 vr-xcon --p2p vr1/1--vr2/1 vr1/2--vr3/1
```
Note how --p2p is not repeated and the arguments to it are simply appended.

It's possible to use the `--debug` option to have a debug written out for every
packet.

### Tcp2Tap mode
For example, say we have a virtual router _r1_, and  want to connect an application
running in the _app_ docker container to the overlay network. We will need to run vr-xcon
in the _app_ container in _Tcp2Tap_ mode, and then connect the two containers with
vr-xcon in _TcpBridge_ mode.

The _r1_ interface already has IPv6 address 2003:1c08:161:1ff::1, we want our app to
use 2003:1c08:161:1ff::42 and also use _r1_ as the default gateway to access the rest
of the overlay networks.

First, run vr-xcon in the _app_ container in the background (note this assumes the
`app` container runs in _privileged_ mode):
```
docker exec -d app bash -c "/xcon.py --tap-listen 1 --ipv6-address 2003:1c08:161:1ff::42/64 --ipv6-route 2003:1c08:161:1ff::1"
```

Then, connect the _app_ container with _r1_ using vr-xcon in _TcpBridge_ mode:
```
docker run -d --privileged --name vr-xcon --link r1 --link app vr-xcon --p2p r1/1--app/1
```

Experimental xcon-ng (acton)
----------------------------
An alternative implementation of xcon written in acton
(https://www.acton-lang.org/) is currently in development. Currently it only
supports TcpBridge mode but the argument format is equivalent. To use it just
replace the entrypoint with `--entrypoint /xcon`.

```
docker run -d --privileged --name vr-xcon-ng --entrypoint /xcon --link vr1 --link vr2 --link vr3 vr-xcon --p2p vr1/1--vr2/1 vr1/2--vr3/1
```

FUAQ - Frequently or Unfrequently Asked Questions
-------------------------------------------------
##### Q: Can I use '--' in the names of my vrnetlab containers?
A: No, since -- is used as the separator in the --p2p argument list for
separating two vrnetlab instances you can not use -- in the name of the
container itself.

##### Q: Is this fast?
A: I haven't tested but I would assume it is incredibly slow.

##### Q: What about jitter / PDV (packet delay variation)?
A: Hehe, it can be really bad:

64 bytes from 192.168.1.2: icmp_seq=2097 ttl=64 time=4.769 ms
    64 bytes from 192.168.1.2: icmp_seq=2098 ttl=64 time=8.317 ms
    64 bytes from 192.168.1.2: icmp_seq=2099 ttl=64 time=15.112 ms
    64 bytes from 192.168.1.2: icmp_seq=2100 ttl=64 time=38.859 ms
    64 bytes from 192.168.1.2: icmp_seq=2101 ttl=64 time=1.940 ms

UPDATE: Most packet delay variation seem to stem from the routers themselves.
Different routers induce different amounts of PDV.

##### Q: Why not connect virtual routers via tap interfaces?
A: It would require fiddling lots more with kernel level networking, which
isn't fun in a docker environment. Since the TCP packets encapsulating the
inner payload run on top of the docker0 bridge it's actually possible to run
vrnetlab virtual routers on different docker hosts and use docker overlay
networking to connect these together (although I've never tested). That
wouldn't work with kernel tap interfaces or similar.

##### Q: Why not use normal docker networks?
A: Docker isn't really built for network centric applications. The default
networking provides a single interface to the container and adding more is a
somewhat elaborate process. In addition, it appears that the networking needs
to be setup before the container starts, which is a no-go for vrnetlab as one
of the design criterias is to be able to setup the topology, or modify it,
after the containers have been started.

##### Q: Why not use TCP listen & connect mode directly from qemu?
A: While this would get rid of vr-xcon and potentially perform much much
better it means the topology would have to be known ahead of time and you
couldn't do any changes to the topology while the virtual routers are running.
vr-xcon defines the topology after the fact that the virtual routes have been
started, making it possible to change the topology by stopping vr-xcon and
starting a new one with a new topology.

##### Q: Starting and stopping vr-xcon to build a new topology would mean packet loss, no?
A: Yes indeed, it will very likely induce packet loss. I believe it could be
kept relatively short though and the way qemu works the virtual routers would
never see their interfaces go down so IS-IS, OSPF or similar should stay up. If
I were to take a guess I think vr-xcon could be stopped and started within a
few milliseconds, so even BFD could potentially be run with quite aggressive
timers without a problem.

Additionally, one can use one vr-xcon process/container per link such that it
is possible to stop a single vr-xcon process without affecting other links.

##### Q: Why not use UDP mode as provided by qemu to directly connect the router?
A: UDP could indeed be used and there would be two alternatives to this, one
would be to set UDP src/dst pairs so that the qemu processes would talk
directly to each other, this however has the inherent problem of knowing the
topology ahead of time. See a previous answer on why this is bad.

The other option would be to use "generic" UDP src/dst pairs and we could have
a udpbridge that receives packets from the virtual routers and virtually
cross-connects them to each other. This is virtually the same as the current
vr-xcon concept, just using UDP instead of TCP but it would also require one
end to be known, which brings us back to the problem of knowing the topology
before the containers are started.
07070100000071000081A400000000000000000000000164A8D17C000012A4000000000000000000000000000000000000003000000000vrnetlab-git1688785276.5a42305/vr-xcon/xcon.actimport net
import time
import file

actor Healthcheck(write_file_auth, expected):
    # keep track of TcpEndpoint actor states (ids, like "r1/1")
    var states = {}

def update(endpoint, state):
        states[endpoint] = state
        _flush()

def _flush():
        count = 0
        for state in states.values():
            if state == 3:
                count += 1
        if count == expected:
            exit_code = 0
            message = "All %d sockets connected" % expected
        else:
            exit_code = 1
            message = "Expected %d sockets but only %d connected" % (expected, count)
        print("healthcheck: %d (%s)" % (exit_code, message))

wf = file.WriteFile(write_file_auth, "health")
        health = "%d\n%s" % (exit_code, message)
        wf.write(health.encode())
        wf.close()

_flush()

actor TcpEndpoint(connect_auth, dns, name, interface, healthcheck):
    port = 10000 + interface
    id = "%s/%d" % (name, interface)
    var _other = None
    var _conn: ?net.TCPIPConnection = None
    var backoff = 0
    var state = 0
    # 0 = starting / waiting / backoff
    # 1 = wait for DNS
    # 2 = wait for connection
    # 3 = connected

def _set_state(s):
        state = s
        healthcheck.update(id, state)

def _on_tcp_connect(c):
        _set_state(3)
        print("TCP Client connection established to %s" % (id))
        backoff = 0

def _on_tcp_receive(c, data):
        if _other is not None:
            _other.write(data)

def _on_tcp_close(c):
        pass

def _on_tcp_error(c, msg):
        print("Error for %s" % (id))
        _reconnect(True)

def _on_dns_resolve(resolved_addresses):
        if state != 1:
            print("Got unexpected DNS response, discarding...")
        else:
            if len(resolved_addresses) > 0:
                addr = resolved_addresses[0]
                print("Resolved %s to %s" % (name, addr))
                # TODO: could potentially use .reconnect() here unless the
                # resolved address has changed, instead of closing current
                # connection and replacing it with a new one. The connection
                # must currently be explicitly closed to clean up resources in
                # the I/O subsystem.
                if _conn is not None:
                    _conn.close(_on_tcp_close)
                _conn = net.TCPIPConnection(connect_auth, addr, port, _on_tcp_connect, _on_tcp_receive, _on_tcp_error)
                _set_state(2)

def _on_dns_error(query, error):
        print("Error resolving DNS name", query, ":", error)
        _reconnect(True)

def _connect():
        if state != 0:
            print("Unexpected state for _connect:", state)
            return
        _set_state(1)
        dns.lookup_a(name, _on_dns_resolve, _on_dns_error)

def _reconnect(error):
        _set_state(0)
        if error:
            backoff = min([backoff + 1.0, 5.0], 1.0)
        after backoff: _connect()

_reconnect(False)

def set_other(o):
        _other = o

def write(data):
        if _conn is not None:
            _conn.write(data)

def parse_side(i):
    parts = i.split("/", None)
    if len(parts) != 2:
        raise ValueError("Bad endpoint definition: %s" % i)
    return (host=parts[0], interface=int(parts[1]))

actor main(env):
    print("Xcon starting up")
    connect_auth = net.TCPConnectAuth(net.TCPAuth(net.NetAuth(env.auth)))
    dns_auth = net.DNSAuth(net.NetAuth(env.auth))
    dns = net.DNS(dns_auth)
    var i = 0
    var p2p = []
    while i < len(env.argv):
        arg = env.argv[i]
        print("arg: %s" % (arg))
        # the --p2p arugment is followed by one or more link specs (python argparse nargs="+")
        if arg == "--p2p":
            i += 1
            while i < len(env.argv) and env.argv[i][0] != "-":
                arg_link = env.argv[i]
                print("\t%s" % arg_link)
                parts = arg_link.split("--", None)
                if len(parts) != 2:
                    print("Bad link", arg_link)
                link = (
                    left=parse_side(parts[0]),
                    right=parse_side(parts[1])
                    )
                p2p.append(link)
                i += 1
        i += 1

fa = file.FileAuth(env.auth)
    wfa = file.WriteFileAuth(fa)
    hc = Healthcheck(wfa, len(p2p) * 2)

var links = []
    for link in p2p:
        left = link.left
        right = link.right
        left_ep = TcpEndpoint(connect_auth, dns, right.host, right.interface, hc)
        right_ep = TcpEndpoint(connect_auth, dns, left.host, left.interface, hc)
        left_ep.set_other(right_ep)
        right_ep.set_other(left_ep)
        links.append((left=left, right=right))
07070100000072000081ED00000000000000000000000164A8D17C00005890000000000000000000000000000000000000002F00000000vrnetlab-git1688785276.5a42305/vr-xcon/xcon.py#!/usr/bin/env python3

import fcntl
import ipaddress
import logging
import os
import select
import signal
import socket
import struct
import subprocess
import sys
import time

def handle_SIGCHLD(signal, frame):
    os.waitpid(-1, os.WNOHANG)

def handle_SIGTERM(signal, frame):
    sys.exit(0)

signal.signal(signal.SIGINT, handle_SIGTERM)
signal.signal(signal.SIGTERM, handle_SIGTERM)
signal.signal(signal.SIGCHLD, handle_SIGCHLD)

class Tcp2Raw:
    def __init__(self, raw_intf = 'eth1', listen_port=10001):
        self.logger = logging.getLogger()
        # setup TCP side
        self.s = socket.socket(socket.AF_INET6, socket.SOCK_STREAM)
        self.s.bind(('::0', listen_port))
        self.s.listen(1)
        self.tcp = None

# track current state of TCP side tunnel. 0 = reading size, 1 = reading packet
        self.tcp_state = 0
        self.tcp_buf = b''
        self.tcp_remaining = 0

# setup raw side
        self.raw = socket.socket( socket.AF_PACKET , socket.SOCK_RAW , socket.ntohs(0x0003))
        self.raw.bind((raw_intf, 0))
        # don't block
        self.raw.setblocking(0)

def work(self):
        while True:

skts = [self.s, self.raw]
            if self.tcp is not None:
                skts.append(self.tcp)
            ir = select.select(skts,[],[])[0][0]
            if ir == self.s:
                self.logger.debug("received incoming TCP connection, setting up!")
                self.tcp, addr = self.s.accept()
            elif ir == self.tcp:
                self.logger.debug("received packet from TCP and sending to raw interface")

try:
                    buf = ir.recv(2048)
                except (ConnectionResetError, OSError):
                    self.logger.warning("connection dropped")
                    continue

if len(buf) == 0:
                    self.logger.info("no data from TCP socket, assuming client hung up, closing our socket")
                    ir.close()
                    self.tcp = None
                    self.tcp_state = 0
                    self.tcp_buf = b''
                    self.tcp_remaining = 0
                    continue

self.tcp_buf += buf
                self.logger.debug("read %d bytes from tcp, tcp_buf length %d" % (len(buf), len(self.tcp_buf)))
                while True:
                    if self.tcp_state == 0:
                        # we want to read the size, which is 4 bytes, if we
                        # don't have enough bytes wait for the next spin
                        if not len(self.tcp_buf) > 4:
                            self.logger.debug("reading size - less than 4 bytes available in buf; waiting for next spin")
                            break
                        size = socket.ntohl(struct.unpack("I", self.tcp_buf[:4])[0]) # first 4 bytes is size of packet
                        self.tcp_buf = self.tcp_buf[4:] # remove first 4 bytes of buf
                        self.tcp_remaining = size
                        self.tcp_state = 1
                        self.logger.debug("reading size - pkt size: %d" % self.tcp_remaining)

if self.tcp_state == 1: # read packet data
                        # we want to read the whole packet, which is specified
                        # by tcp_remaining, if we don't have enough bytes we
                        # wait for the next spin
                        if len(self.tcp_buf) < self.tcp_remaining:
                            self.logger.debug("reading packet - less than remaining bytes; waiting for next spin")
                            break
                        self.logger.debug("reading packet - reading %d bytes" % self.tcp_remaining)
                        payload = self.tcp_buf[:self.tcp_remaining]
                        self.tcp_buf = self.tcp_buf[self.tcp_remaining:]
                        self.tcp_remaining = 0
                        self.tcp_state = 0
                        self.raw.send(payload)

else:
                # we always get full packets from the raw interface
                payload = self.raw.recv(2048)
                buf = struct.pack("I", socket.htonl(len(payload))) + payload
                if self.tcp is None:
                    self.logger.warning("received packet from raw interface but TCP not connected, discarding packet")
                else:
                    self.logger.debug("received packet from raw interface and sending to TCP")
                    try:
                        self.tcp.send(buf)
                    except:
                        self.logger.warning("could not send packet to TCP session")

class Tcp2Tap:
    def __init__(self, tap_intf = 'tap0', listen_port=10001):
        self.logger = logging.getLogger()
        # setup TCP side
        self.s = socket.socket(socket.AF_INET6, socket.SOCK_STREAM)
        self.s.bind(('::0', listen_port))
        self.s.listen(1)
        self.tcp = None

# track current state of TCP side tunnel. 0 = reading size, 1 = reading packet
        self.tcp_state = 0
        self.tcp_buf = b''
        self.tcp_remaining = 0

# setup tap side
        TUNSETIFF = 0x400454ca
        IFF_TUN = 0x0001
        IFF_TAP = 0x0002
        IFF_NO_PI = 0x1000
        self.tap = os.open("/dev/net/tun", os.O_RDWR)
        # we want a tap interface, no packet info and it should be called tap0
        # TODO: implement dynamic name using tap%d, right now we assume we are
        # only program in this namespace (docker container) that creates tap0
        ifs = fcntl.ioctl(self.tap, TUNSETIFF, struct.pack("16sH", tap_intf.encode(), IFF_TAP | IFF_NO_PI))
        # ifname - good for when we do dynamic interface name
        ifname = ifs[:16].decode().strip("\x00")

def work(self):
        while True:
            skts = [self.s, self.tap]
            if self.tcp is not None:
                skts.append(self.tcp)
            ir = select.select(skts,[],[])[0][0]
            if ir == self.s:
                self.logger.debug("received incoming TCP connection, setting up!")
                self.tcp, addr = self.s.accept()
            elif ir == self.tcp:
                self.logger.debug("received packet from TCP and sending to tap interface")

try:
                    buf = ir.recv(2048)
                except (ConnectionResetError, OSError):
                    self.logger.warning("connection dropped")
                    continue

else:
                # we always get full packets from the tap interface
                payload = os.read(self.tap, 2048)
                buf = struct.pack("I", socket.htonl(len(payload))) + payload
                if self.tcp is None:
                    self.logger.warning("received packet from tap interface but TCP not connected, discarding packet")
                else:
                    self.logger.debug("received packet from tap interface and sending to TCP")
                    try:
                        self.tcp.send(buf)
                    except:
                        self.logger.warning("could not send packet to TCP session")

class TcpBridge:
    def __init__(self):
        self.logger = logging.getLogger()
        self.sockets = []
        self.socket2remote = {}
        self.socket2hostintf = {}

def hostintf2addr(self, hostintf):
        hostname, interface = hostintf.split("/")

try:
            res = socket.getaddrinfo(hostname, "100%02d" % int(interface), socket.AF_INET)
        except socket.gaierror:
            raise NoVR("Unable to resolve %s" % hostname)
        sockaddr = res[0][4]
        return sockaddr

def add_p2p(self, p2p):
        source, destination = p2p.split("--")
        src_router, src_interface = source.split("/")
        dst_router, dst_interface = destination.split("/")

src = self.hostintf2addr(source)
        dst = self.hostintf2addr(destination)

left = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
        right = socket.socket(socket.AF_INET, socket.SOCK_STREAM)

# dict to map back to hostname & interface
        self.socket2hostintf[left] = "%s/%s" % (src_router, src_interface)
        self.socket2hostintf[right] = "%s/%s" % (dst_router, dst_interface)

try:
            left.connect(src)
        except:
            self.logger.info("Unable to connect to %s" % self.socket2hostintf[left])
        try:
            right.connect(dst)
        except:
            self.logger.info("Unable to connect to %s" % self.socket2hostintf[right])

# add to list of sockets
        self.sockets.append(left)
        self.sockets.append(right)

# dict for looking up remote in pair
        self.socket2remote[left] = right
        self.socket2remote[right] = left

def work(self):
        while True:
            try:
                ir,_,_ = select.select(self.sockets, [], [])
            except select.error as exc:
                break

for i in ir:
                remote = self.socket2remote[i]
                try:
                    buf = i.recv(2048)
                except ConnectionResetError as exc:
                    self.logger.warning("connection dropped, reconnecting to source %s" % self.socket2hostintf[i])
                    try:
                        i.connect(self.hostintf2addr(self.socket2hostintf[i]))
                        self.logger.debug("reconnect to %s successful" % self.socket2hostintf[i])
                    except Exception as exc:
                        self.logger.warning("reconnect failed %s" % str(exc))
                    continue
                except OSError as exc:
                    self.logger.warning("endpoint not connected, connecting to source %s" % self.socket2hostintf[i])
                    try:
                        i.connect(self.hostintf2addr(self.socket2hostintf[i]))
                        self.logger.debug("connect to %s successful" % self.socket2hostintf[i])
                    except:
                        self.logger.warning("connect failed %s" % str(exc))
                    continue

if len(buf) == 0:
                    return
                self.logger.debug("%05d bytes %s -> %s " % (len(buf), self.socket2hostintf[i], self.socket2hostintf[remote]))
                try:
                    remote.send(buf)
                except BrokenPipeError:
                    self.logger.warning("unable to send packet %05d bytes %s -> %s due to remote being down, trying reconnect" % (len(buf), self.socket2hostintf[i], self.socket2hostintf[remote]))
                    try:
                        remote.connect(self.hostintf2addr(self.socket2hostintf[remote]))
                        self.logger.debug("connect to %s successful" % self.socket2hostintf[remote])
                    except Exception as exc:
                        self.logger.warning("connect failed %s" % str(exc))
                    continue

class TcpHub:
    def __init__(self):
        self.logger = logging.getLogger()
        self.sockets = []
        self.socket2hostintf = {}

def ep2addr(self, hostintf):
        """ Return address based on endpoint
        """
        hostname, interface = hostintf.split("/")

def add_ep(self, ep):
        host, interface = ep.split("/")

remote = self.ep2addr(ep)

s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)

# dict to map back to hostname & interface
        self.socket2hostintf[s] = "%s/%s" % (host, interface)

try:
            s.connect(remote)
        except:
            self.logger.info("Unable to connect to %s" % self.socket2hostintf[remote])

# add to list of sockets
        self.sockets.append(s)

def work(self):
        while True:
            try:
                ir,_,_ = select.select(self.sockets, [], [])
            except select.error as exc:
                break

for i in ir:

try:
                    buf = i.recv(2048)
                except ConnectionResetError as exc:
                    self.logger.warning("connection dropped, reconnecting to source %s" % self.socket2hostintf[i])
                    try:
                        i.connect(self.ep2addr(self.socket2hostintf[i]))
                        self.logger.debug("reconnect to %s successful" % self.socket2hostintf[i])
                    except Exception as exc:
                        self.logger.warning("reconnect failed %s" % str(exc))
                    continue
                except OSError as exc:
                    self.logger.warning("endpoint not connected, connecting to source %s" % self.socket2hostintf[i])
                    try:
                        i.connect(self.ep2addr(self.socket2hostintf[i]))
                        self.logger.debug("connect to %s successful" % self.socket2hostintf[i])
                    except:
                        self.logger.warning("connect failed %s" % str(exc))
                    continue

if len(buf) == 0:
                    return

# send to all other sockets
                for remote in self.sockets:
                    self.logger.debug("%05d bytes %s -> %s " % (len(buf), self.socket2hostintf[i], self.socket2hostintf[remote]))
                    # don't need to send to ourselves though
                    if i is remote:
                        continue

try:
                        remote.send(buf)
                    except BrokenPipeError:
                        self.logger.warning("unable to send packet %05d bytes %s -> %s due to remote being down, trying reconnect" % (len(buf), self.socket2hostintf[i], self.socket2hostintf[remote]))
                        try:
                            remote.connect(self.ep2addr(self.socket2hostintf[remote]))
                            self.logger.debug("connect to %s successful" % self.socket2hostintf[remote])
                        except Exception as exc:
                            self.logger.warning("connect failed %s" % str(exc))
                        continue

class NoVR(Exception):
    """ No virtual router
    """

class TapConfigurator(object):
    def __init__(self, logger):
        self.logger = logger

def _configure_interface_address(self, interface, address, default_route=None):
        next_hop = None
        net = ipaddress.ip_interface(address)
        if default_route:
            try:
                next_hop = ipaddress.ip_address(default_route)
            except ValueError:
                self.logger.error("next-hop address {} could not be parsed".format(default_route))
                sys.exit(1)

if default_route and next_hop not in net.network:
            self.logger.error("next-hop address {} not in network {}".format(next_hop, net))
            sys.exit(1)

subprocess.check_call(["ip", "-{}".format(net.version), "address", "add", str(net.ip) + "/" + str(net.network.prefixlen), "dev", interface])
        if next_hop:
            try:
                subprocess.check_call(["ip", "-{}".format(net.version), "route", "del", "default"])
            except:
                pass
            subprocess.check_call(["ip", "-{}".format(net.version), "route", "add", "default", "dev", interface, "via", str(next_hop)])

def configure_interface(self, interface='tap0', vlan=None,
                            ipv4_address=None, ipv4_route=None,
                            ipv6_address=None, ipv6_route=None):
        # enable the interface
        subprocess.check_call(["ip", "link", "set", interface, "up"])

interface_sysctl = interface
        if vlan:
            physical_interface = interface
            interface_sysctl = '{}/{}'.format(interface, vlan)
            interface = '{}.{}'.format(interface, vlan)
            subprocess.check_call(["ip", "link", "add", "link", physical_interface, "name",
                                   interface, "type", "vlan", "id", str(vlan)])
            subprocess.check_call(["ip", "link", "set", interface, "up"])

if ipv4_address:
            self._configure_interface_address(interface, ipv4_address, ipv4_route)

if ipv6_address:
            # stupid hack for docker engine disabling IPv6. It's somewhere around
            # version 17.04 that docker engine started disabling ipv6 on the sysctl
            # net.ipv6.conf.all and net.ipv6.conf.default while eth0 and lo still has
            # it, if docker engine is started with --ipv6. However, with the default at
            # disable we have to specifically enable it for interfaces created after the
            # container started...
            subprocess.check_call(["sysctl", "net.ipv6.conf.{}.disable_ipv6=0".format(interface_sysctl)])
            self._configure_interface_address(interface, ipv6_address, ipv6_route)

if __name__ == '__main__':
    import argparse
    parser = argparse.ArgumentParser(description='')
    parser.add_argument('--debug', action="store_true", default=False, help='enable debug')
    meg = parser.add_mutually_exclusive_group(required=True)
    meg.add_argument('--p2p', nargs='+', help='point-to-point link between virtual routers')
    meg.add_argument('--hub', nargs='+', help='hub between virtual routers, will forward any incoming packets to all outputs, like a hub')
    meg.add_argument('--raw-listen', help='raw to virtual router. Will listen on specified port for incoming connection; 1 for TCP/10001')
    meg.add_argument('--tap-listen', help='tap to virtual router. Will listen on specified port for incoming connection; 1 for TCP/10001')
    raw = parser.add_argument_group('raw')
    raw.add_argument('--raw-if', default="eth1", help='name of raw interface (use with other --raw-* arguments)')
    tap = parser.add_argument_group('tap')
    tap.add_argument('--tap-if', default="tap0", help='name of tap interface (use with other --tap-* arguments)')
    tap.add_argument('--ipv4-address', help='IPv4 address to use on the tap interface')
    tap.add_argument('--ipv4-route', help='default IPv4 route to use on the tap interface')
    tap.add_argument('--ipv6-address', help='IPv6 address to use on the tap interface')
    tap.add_argument('--ipv6-route', help='default IPv6 route to use on the tap interface')
    tap.add_argument('--vlan', type=int, help='VLAN ID to use on the tap interface')
    parser.add_argument('--trace', action="store_true", help="dummy, we don't support tracing but taking the option makes vrnetlab containers uniform")
    args = parser.parse_args()

# Fake healtcheck until supported in xcon.py
    with open("health", "w") as hc:
        hc.write("0")

if args.p2p:
        tt = TcpBridge()
        for p2p in args.p2p:
            try:
                tt.add_p2p(p2p)
            except NoVR as exc:
                print(exc, " Is it started and did you link it?")
                sys.exit(1)
        tt.work()

if args.hub:
        hub = TcpHub()
        for ep in args.hub:
            try:
                hub.add_ep(ep)
            except NoVR as exc:
                print(exc, " Is it started and did you link it?")
                sys.exit(1)
        hub.work()

if args.tap_listen:
        # init Tcp2Tap to create interface
        t2t = Tcp2Tap(args.tap_if, 10000 + int(args.tap_listen))

# now (optionally) configure addressing
        tc = TapConfigurator(logger)
        tc.configure_interface(interface=args.tap_if, vlan=args.vlan,
                               ipv4_address=args.ipv4_address, ipv4_route=args.ipv4_route,
                               ipv6_address=args.ipv6_address, ipv6_route=args.ipv6_route)
        t2t.work()

if args.raw_listen:
        while True:
            try:
                t2r = Tcp2Raw(args.raw_if, 10000 + int(args.raw_listen))
                t2r.work()
            except Exception as exc:
                print(exc)
            time.sleep(1)
07070100000073000081A400000000000000000000000164A8D17C0000046F000000000000000000000000000000000000002B00000000vrnetlab-git1688785276.5a42305/vrnetlab.sh#!/bin/sh

vr_mgmt_ip() { 
	VROUTER=$1
	VR_ADDRESS=$(docker inspect --format '{{.NetworkSettings.IPAddress}}' $VROUTER)
	echo $VR_ADDRESS
}

vrssh() {
	VROUTER=$1
	USER=$2
	VR_ADDRESS=$(vr_mgmt_ip $VROUTER)

if [ -z "$USER" ] ; then
		if [ -x $(command -v sshpass) ]; then
			sshpass -p VR-netlab9 ssh -oStrictHostKeyChecking=no $VR_ADDRESS -l vrnetlab
		else
			ssh -oStrictHostKeyChecking=no $VR_ADDRESS -l vrnetlab
		fi
	else
		ssh -oStrictHostKeyChecking=no $VR_ADDRESS -l $USER
	fi
}

vrsftp() {
        VROUTER=$1
        USER=$2
        VR_ADDRESS=$(vr_mgmt_ip $VROUTER)

if [ -z "$USER" ] ; then
                if [ -x $(command -v sshpass) ]; then
                        sshpass -p VR-netlab9 sftp  vrnetlab@$VR_ADDRESS
                else
                        sftp vrnetlab@$VR_ADDRESS
                fi
        else
                sftp $USER@$VR_ADDRESS
        fi
}

vrcons() {
	VROUTER=$1
	telnet $(vr_mgmt_ip $VROUTER) 5000
}

vrbridge() {
	VR1=$1
	VP1=$2
	VR2=$3
	VP2=$4

docker run -d  --name "bridge-${VR1}-${VP1}-${VR2}-${VP2}" --link $VR1 --link $VR2 vr-xcon --p2p "${VR1}/${VP1}--${VR2}/${VP2}"
}
07070100000074000041ED00000000000000000000000364A8D17C00000000000000000000000000000000000000000000002300000000vrnetlab-git1688785276.5a42305/vrp07070100000075000081A400000000000000000000000164A8D17C0000013D000000000000000000000000000000000000002C00000000vrnetlab-git1688785276.5a42305/vrp/MakefileVENDOR=Huawei
NAME=VRP
IMAGE_FORMAT=qcow2
IMAGE_GLOB=*.qcow2

# match versions like:
# Simulator_V100R001C00SPC001T.qcow2
VERSION=$(shell echo $(IMAGE) | sed -e 's/.*$V[0-9][0-9][0-9]R[0-9][0-9][0-9]C[0-9][0-9]SPC[0-9][0-9][0-9]$T\?$.*\|$$$/\1/')

-include ../makefile-sanity.include
-include ../makefile.include
07070100000076000081A400000000000000000000000164A8D17C00000438000000000000000000000000000000000000002D00000000vrnetlab-git1688785276.5a42305/vrp/README.mdvrnetlab / Huawei VRP
=====================
This is the vrnetlab docker image for Huawei VRP virtual router simulator.

Building the docker image
-------------------------
You probably can't get the image for this, but if you did, place it in this
directory and run make.

It's been tested to boot and respond to SSH with:

* Simulator_V100R001C00SPC001T.qcow2  MD5:a4243883628c8ed18b7d5efb39dfee6d

FUAQ - Frequently or Unfrequently Asked Questions
-------------------------------------------------
##### Q: My VRP isn't starting
A: That's really not a question, is it? Anyway, I've had it take 15 minutes to
start. Sometimes closer to 30 minutes when my machine was loaded.

##### Q: Looking at the trace log, VRP seems to be restarting
A: VRP seems quite sensitive. Disabling CPU throttling has been known to help,
that is, disabling APM in BIOS. Just changing the CPU power governor in Linux
doesn't yield much of a difference. Disabling hyperthreading also helps. While
hyperthreading yields higher concurrency performance, the performance per
thread is actually lowered.
07070100000077000041ED00000000000000000000000264A8D17C00000000000000000000000000000000000000000000002A00000000vrnetlab-git1688785276.5a42305/vrp/docker07070100000078000081A400000000000000000000000164A8D17C000001CF000000000000000000000000000000000000003500000000vrnetlab-git1688785276.5a42305/vrp/docker/DockerfileFROM debian:bullseye
MAINTAINER Kristian Larsson <kristian@spritelink.net>

RUN apt-get update -qy \
    && apt-get upgrade -qy \
    && apt-get install -y \
        qemu-kvm \
        bridge-utils \
        socat \
        iproute2 \
        python3-ipy \
        python3-pexpect \
        ssh \
    && rm -rf /var/lib/apt/lists/*

ARG IMAGE
COPY $IMAGE /
COPY *.py /
EXPOSE 22 830 5000 10000-10099

HEALTHCHECK CMD ["/healthcheck.py"]
ENTRYPOINT ["/launch.py"]
07070100000079000081ED00000000000000000000000164A8D17C00001CDF000000000000000000000000000000000000003400000000vrnetlab-git1688785276.5a42305/vrp/docker/launch.py#!/usr/bin/env python3

import datetime
import logging
import re
import signal
import sys
import time
import os
import vrnetlab

def handle_SIGCHLD(signal, frame):
    os.waitpid(-1, os.WNOHANG)

def handle_SIGTERM(signal, frame):
    sys.exit(0)

signal.signal(signal.SIGINT, handle_SIGTERM)
signal.signal(signal.SIGTERM, handle_SIGTERM)
signal.signal(signal.SIGCHLD, handle_SIGCHLD)

class simulator_VM(vrnetlab.VM):
    no_paging_command = 'screen-length 0 temporary'

def __init__(self, username, password):
        for e in os.listdir("/"):
            if re.search(".qcow2$", e):
                disk_image = "/" + e

self.ram = 16384
        self.vcpu = 6
        self.disk_size = '40G'
        super(simulator_VM, self).__init__(username, password, disk_image=disk_image, ram=self.ram)

self.num_nics = 14
        self.wait_time = 30
        self.nic_type = 'virtio-net-pci'

vrnetlab.run_command(["qemu-img", "create", "-f", "qcow2", "DataDisk.qcow2", self.disk_size])

self.qemu_args.extend(["-smp", str(self.vcpu),
                               "-cpu", "host",
                               "-drive", "if=virtio,format=qcow2,file=DataDisk.qcow2"])

self.qemu_args.extend(["-D", "/var/log/qemu.log"])

def bootstrap_spin(self):
        """ This function should be called periodically to do work.
        """

if self.spins > 300:
            # too many spins with no result ->  give up
            self.stop()
            self.start()
            return

tn_switcher = {
            0: 'root',              # User Root Login
            1: 'Huawei@123',        # root password
            2: 'Root@123',          # time_client_start enter password
            3: 'Root@123',          # time_client_start enter again
            4: '\n'                   # Press Enter to Continue
        }

(ridx, match, res) = self.tn.expect([b'localhost login: ',
                                             b'Password: ',
                                             b'Enter Password:',
                                             b'Confirm Password:',
                                             b'other key continue'], 1)

if match:  # got a match!
            v = tn_switcher.get(ridx)
            self.wait_write(cmd=v, wait=None)
            # Enter the CLI, then config device
            if ridx == 3:
                # run main config!
                self.bootstrap_config()
                time.sleep(1)
                # send Ctrl + [ to close time_client_start
                # self.wait_write(cmd='\x1D', wait=None)
                # close telnet connection
                self.tn.close()
                # startup time?
                startup_time = datetime.datetime.now() - self.start_time
                self.logger.info("Startup complete in: %s" % startup_time)
                # mark as running
                self.running = True
                return

time.sleep(5)

self.spins += 1

return

def bootstrap_config(self):
        """ Do the actual bootstrap config
        """
        # Wait for GigabitEthernet4/0/X interfaces to appear in running config
        # NOTE: do not use 'display current-configuration interface GigabitEtherhet 4/0/X'
        # to check. The output differs from 'display current-configuration'!
        self.wait_config("display current-configuration", 'interface GigabitEthernet4/0/1')
        self.wait_config("display current-configuration", 'interface GigabitEthernet4/0/4')
        self.wait_config("display current-configuration", 'interface GigabitEthernet4/0/14')
        # The first response might be the log message like
        # 12/active/linkDown/Major/occurredTime:2019-11-11 23:49:03/-/-/alarmID:0x08520003/VS=Admin-VS-CID=0x807a0404:The interface status changes. (ifName=GigabitEthernet4/0/14, AdminStatus=UP, OperStatus=UP, Reason=Interface physical link is up, mainIfname=GigabitEthernet4/0/14
        # So wait three more times to make sure we get the correct response
        self.wait_config("display current-configuration", 'interface GigabitEthernet4/0/14')
        self.wait_config("display current-configuration", 'interface GigabitEthernet4/0/14')
        self.wait_config("display current-configuration", 'interface GigabitEthernet4/0/14')
        self.logger.info("applying bootstrap configuration")
        self.wait_write(cmd="", wait=None)
        self.wait_write(cmd="", wait=None)

self.wait_write(cmd="system-view", wait=None)
        self.wait_write(cmd="sysname HUAWEI", wait="]")
        self.wait_write(cmd="ssh server key-exchange dh_group14_sha1", wait="]")
        self.wait_write(cmd="interface GigabitEthernet 0/0/0", wait="]")
        self.wait_write(cmd="ip address 10.0.0.15 24", wait="]")
        self.wait_write(cmd="commit", wait="]")

# when simulator booting, config is not ok
        # Error: The system is busy in building configuration. Please wait for a moment...
        while True:
            (idx, match, res) = self.tn.expect([b'Error:'], 1)
            if match:
                if idx == 0:
                    self.wait_write(cmd="commit", wait=None)
                    time.sleep(5)
            else:
                break

# add User vrnetlab
        self.wait_write(cmd="aaa", wait=None)
        self.wait_write(cmd="local-user %s password" % self.username, wait="]")
        self.wait_write(cmd="%s" % self.password, wait="Enter Password:")
        self.wait_write(cmd="%s" % self.password, wait="Confirm Password:")
        self.wait_write(cmd="local-user %s service-type ssh" % self.username, wait="]")
        self.wait_write(cmd="local-user %s user-group manage-ug" % self.username, wait="]")
        self.wait_write(cmd="commit", wait="]")

class simulator(vrnetlab.VR):

def __init__(self, username, password):
        super(simulator, self).__init__(username, password)
        self.vms = [simulator_VM(username, password)]

if __name__ == '__main__':
    import argparse
    parser = argparse.ArgumentParser(description='')
    parser.add_argument('--trace', action='store_true', help='enable trace level logging')
    parser.add_argument('--username', default='vrnetlab', help='Username')
    parser.add_argument('--password', default='VR-netlab9', help='Password')
    parser.add_argument('--num-nics', default=14, type=int, help='Number of NICs, this parameter is IGNORED, only added to be compatible with other platforms')

args = parser.parse_args()

LOG_FORMAT = "%(asctime)s: %(module)-10s %(levelname)-8s %(message)s"
    logging.basicConfig(format=LOG_FORMAT)
    logger = logging.getLogger()

logger.setLevel(logging.DEBUG)

if args.trace:
        logger.setLevel(1)

vr = simulator(args.username, args.password)
    vr.start()
0707010000007A000041ED00000000000000000000000364A8D17C00000000000000000000000000000000000000000000002700000000vrnetlab-git1688785276.5a42305/vsr10000707010000007B000081A400000000000000000000000164A8D17C00000150000000000000000000000000000000000000003000000000vrnetlab-git1688785276.5a42305/vsr1000/MakefileVENDOR=HP
NAME=VSR1000
IMAGE_FORMAT=qcow2
IMAGE_GLOB=*.qco

# match versions like:
# VSR1000_HPE-CMW710-R0326-X64.qcow
# VSR1000_HPE-CMW710-E0321P01-X64.qco
VERSION=$(shell echo $(IMAGE) | sed -n 's/.*CMW$[0-9]$$[0-9]\+$-$[ER][0-9][0-9][0-9][0-9]$.*/\1.\2-\3/p')

-include ../makefile-sanity.include
-include ../makefile.include

0707010000007C000081A400000000000000000000000164A8D17C00000419000000000000000000000000000000000000003100000000vrnetlab-git1688785276.5a42305/vsr1000/README.mdvrnetlab / HP VSR1000
=====================
This is the vrnetlab docker image for HP VSR1000.

Building the docker image
-------------------------
Download the HPE VSR1001 image from 
https://h10145.www1.hpe.com/downloads/SoftwareReleases.aspx?ProductNumber=JG811AAE
Unzip the downloaded zip file, place the .qco image in this directory and run
`make docker-image`. The tag is the same as the version of the VSR1000 image,
so if you have VSR1000_HPE-CMW710-R0326-X64.qco your docker image will be
called vr-vsr1000:7.10-R0326

Tested booting and responding to SSH:
 * VSR1000_HPE-CMW710-R0326-X64.qco   MD5:4153d638bfa72ca72a957ea8682ad0e2

Usage
-----
```
docker run -d --privileged --name my-vsr1000-router vr-vsr1000:7.10-R0326
```

System requirements
-------------------
CPU: 1 core

RAM: 1GB

Disk: <1GB

FUAQ - Frequently or Unfrequently Asked Questions
-------------------------------------------------
##### Q: Has this been extensively tested?
A: Nope. It starts and you can connect to it. Take it for a spin and provide some feedback :-)
0707010000007D000041ED00000000000000000000000264A8D17C00000000000000000000000000000000000000000000002E00000000vrnetlab-git1688785276.5a42305/vsr1000/docker0707010000007E000081A400000000000000000000000164A8D17C000001BC000000000000000000000000000000000000003900000000vrnetlab-git1688785276.5a42305/vsr1000/docker/DockerfileFROM debian:bullseye
MAINTAINER Kristian Larsson <kristian@spritelink.net>

ENV DEBIAN_FRONTEND=noninteractive

RUN apt-get update -qy \
 && apt-get upgrade -qy \
 && apt-get install -y \
    bridge-utils \
    iproute2 \
    python3-ipy \
    socat \
    qemu-kvm \
 && rm -rf /var/lib/apt/lists/*

ARG IMAGE
COPY $IMAGE* /
COPY *.py /

EXPOSE 22 161/udp 830 5000 6000 10000-10099
HEALTHCHECK CMD ["/healthcheck.py"]
ENTRYPOINT ["/launch.py"]
0707010000007F000081ED00000000000000000000000164A8D17C000015EF000000000000000000000000000000000000003800000000vrnetlab-git1688785276.5a42305/vsr1000/docker/launch.py#!/usr/bin/env python3

import datetime
import logging
import os
import re
import signal
import sys
import telnetlib
import time

import vrnetlab

def handle_SIGCHLD(signal, frame):
    os.waitpid(-1, os.WNOHANG)

def handle_SIGTERM(signal, frame):
    sys.exit(0)

signal.signal(signal.SIGINT, handle_SIGTERM)
signal.signal(signal.SIGTERM, handle_SIGTERM)
signal.signal(signal.SIGCHLD, handle_SIGCHLD)

class VSR_vm(vrnetlab.VM):
    def __init__(self, username, password):
        for e in os.listdir("/"):
            if re.search(".qco$", e):
                disk_image = "/" + e
        super(VSR_vm, self).__init__(username, password, disk_image=disk_image, ram=1024)

# The VSR supports up to 15 user nics
        self.num_nics = 7

def bootstrap_spin(self):
        """ This function should be called periodically to do work.
        """

if self.spins > 300:
            # too many spins with no result ->  give up
            self.stop()
            self.start()
            return

(ridx, match, res) = self.tn.expect([b"Performing automatic"], 1)
        if match: # got a match!
            if ridx == 0: # login
                self.logger.debug("VM started")

self.wait_write("", wait="(qemu)", con=self.qm)

# To allow access to aux0 serial console
                self.logger.debug("Writing to QEMU Monitor")

# Cred to @plajjan for this one
                commands = """\x04

system-view
user-interface aux 0
authentication-mode none
user-role network-admin
quit

"""

key_map = {
                    '\x04': 'ctrl-d',
                    ' ': 'spc',
                    '-': 'minus',
                    '\n': 'kp_enter'
                }

qemu_commands = [ "sendkey {}".format(key_map.get(c) or c) for c in commands ]

for c in qemu_commands:
                    self.wait_write(c, wait="(qemu)", con=self.qm)
                    # Pace the characters sent via QEMU Monitor
                    time.sleep(0.1)

self.logger.debug("Done writing to QEMU Monitor")
                self.logger.debug("Switching to line aux0")

self.tn = telnetlib.Telnet("127.0.0.1", 5000 + self.num)

self.spins += 1

return

def bootstrap_config(self):
        """ Do the actual bootstrap config
        """
        self.logger.info("applying bootstrap configuration")
        self.wait_write("\r", None)
        # Wait for the prompt
        time.sleep(1)
        self.wait_write("system-view", "<HPE>")
        self.wait_write("ssh server enable", "[HPE]")
        self.wait_write("user-interface class vty", "[HPE]")
        self.wait_write("authentication-mode scheme", "[HPE-line-class-vty]")
        self.wait_write("protocol inbound ssh", "[HPE-line-class-vty]")
        self.wait_write("quit", "[HPE-line-class-vty]")
        self.wait_write("local-user %s" % (self.username), "[HPE]")
        self.wait_write("password simple %s" % (self.password), "[HPE-luser-manage-%s]" % (self.username))
        self.wait_write("service-type ssh", "[HPE-luser-manage-%s]" % (self.username))
        self.wait_write("authorization-attribute user-role network-admin", "[HPE-luser-manage-%s]" % (self.username))
        self.wait_write("quit", "[HPE-luser-manage-%s]" % (self.username))
        self.wait_write("interface GigabitEthernet%s/0" % (self.num_nics + 1), "[HPE]")
        self.wait_write("ip address 10.0.0.15 255.255.255.0", "[HPE-GigabitEthernet%s/0]" % (self.num_nics + 1))
        self.wait_write("quit", "[HPE-GigabitEthernet%s/0]" % (self.num_nics + 1))
        self.wait_write("quit", "[HPE]")
        self.wait_write("quit", "<HPE>")
        self.logger.info("completed bootstrap configuration")

class VSR(vrnetlab.VR):
    def __init__(self, username, password):
        super(VSR, self).__init__(username, password)
        self.vms = [ VSR_vm(username, password) ]

LOG_FORMAT = "%(asctime)s: %(module)-10s %(levelname)-8s %(message)s"
    logging.basicConfig(format=LOG_FORMAT)
    logger = logging.getLogger()

logger.setLevel(logging.DEBUG)
    if args.trace:
        logger.setLevel(1)

vr = VSR(args.username, args.password)
    vr.start()
07070100000080000041ED00000000000000000000000364A8D17C00000000000000000000000000000000000000000000002400000000vrnetlab-git1688785276.5a42305/vsrx07070100000081000081A400000000000000000000000164A8D17C00000101000000000000000000000000000000000000002D00000000vrnetlab-git1688785276.5a42305/vsrx/MakefileVENDOR=Juniper
NAME=vSRX
IMAGE_FORMAT=qcow
IMAGE_GLOB=*.qcow2
IMAGE=junos-vsrx3-x86-64-20.2R1.10.qcow2

# match versions like:
# 12.1X47-D15.4
VERSION=$(shell echo $(IMAGE) | cut -d - -f2,3)

-include ../makefile-sanity.include
-include ../makefile.include
07070100000082000081A400000000000000000000000164A8D17C00000447000000000000000000000000000000000000002E00000000vrnetlab-git1688785276.5a42305/vsrx/README.mdvrnetlab / Juniper vSRX
==================================
This is the vrnetlab docker image for Juniper vSRX.

Building the docker image
-------------------------
The image can be downloaded automatically using ```./get-vsrx.sh```. The script will download the official Juniper Vagrant box (216 MB), uncompress it and convert the vSRX image to a QCOW2 format.
Run ```make docker-image``` to build the docker image.

Tested booting and responding to SSH:
 * ffp-12.1X47-D15.4-packetmode.qcow2   MD5:692628eb87e067db33459a0030ec81b0

Usage
-----
```
docker run -d --privileged --name my-vsrx-box vrnetlab/vr-vsrx:12.1X47-D15.4
```

System requirements
-------------------
CPU: 2 core

RAM: 2GB

Disk: <1GB

https://www.juniper.net/documentation/en_US/firefly12.1x46-d10/topics/reference/general/security-virtual-perimeter-system-requirement-with-kvm.html

FAQ - Frequently or Unfrequently Asked Questions
-------------------------------------------------
##### Q: Has this been extensively tested?
A: Nope. It starts and you can connect to it. Take it for a spin and provide
some feedback :-)
07070100000083000041ED00000000000000000000000264A8D17C00000000000000000000000000000000000000000000002B00000000vrnetlab-git1688785276.5a42305/vsrx/docker07070100000084000081A400000000000000000000000164A8D17C000000BC000000000000000000000000000000000000003600000000vrnetlab-git1688785276.5a42305/vsrx/docker/DockerfileFROM registry.opensuse.org/isv/suseinfra/containers/containerfile/vrnetlab-base:latest
MAINTAINER Georg Pfuetzenreuter <georg.pfuetzenreuter@suse.com>

ARG IMAGE
COPY $IMAGE* /opt/images/
07070100000085000081ED00000000000000000000000164A8D17C000012EE000000000000000000000000000000000000003500000000vrnetlab-git1688785276.5a42305/vsrx/docker/launch.py#!/usr/bin/env python3

import datetime
import logging
import os
import re
import signal
import sys

import vrnetlab

def handle_SIGCHLD(signal, frame):
    os.waitpid(-1, os.WNOHANG)

def handle_SIGTERM(signal, frame):
    sys.exit(0)

signal.signal(signal.SIGINT, handle_SIGTERM)
signal.signal(signal.SIGTERM, handle_SIGTERM)
signal.signal(signal.SIGCHLD, handle_SIGCHLD)

# expose REST API
vrnetlab.HOST_FWDS.append(('tcp', 3000, 3000))

class VSRX_vm(vrnetlab.VM):
    def __init__(self, username, password):
        for e in os.listdir("/opt/images"):
            if re.search(".qcow2$", e):
                disk_image = "/opt/images/" + e
        super(VSRX_vm, self).__init__(username, password, disk_image=disk_image, ram=6144)
        self.qemu_args.extend(["-smp", "2"])
        self.nic_type = "virtio-net-pci"
        self.num_nics = 10

def bootstrap_spin(self):
        """ This function should be called periodically to do work.
        """

if self.spins > 300:
            # too many spins with no result ->  give up
            self.stop()
            self.start()
            return

(ridx, match, res) = self.tn.expect([b"login:"], 1)
        if match: # got a match!
            if ridx == 0: # login
                self.logger.info("VM started")

# Login
                self.wait_write("\r", None)
                self.wait_write("root", wait="login:")
                self.wait_write("", wait="root@:~ #")
                self.logger.info("Login completed")

# no match, if we saw some output from the router it's probably
        # booting, so let's give it some more time
        if res != b'':
            self.logger.trace("OUTPUT:\n%s" % res.decode())
            # reset spins if we saw some output
            self.spins = 0

self.spins += 1

return

def bootstrap_config(self):
        """ Do the actual bootstrap config
        """
        self.logger.info("applying bootstrap configuration")
        self.wait_write("cli", "%")
        self.wait_write("configure", ">")
        self.wait_write("set system services ssh", "#")
        self.wait_write("set system services netconf ssh", "#")
        self.wait_write("set system login user %s class super-user authentication plain-text-password" % ( self.username ), "#")
        self.wait_write(self.password, "New password:")
        self.wait_write(self.password, "Retype new password:")
        self.wait_write("set system root-authentication plain-text-password", "#")
        self.wait_write(self.password, "New password:")
        self.wait_write(self.password, "Retype new password:")
        self.wait_write("set interfaces fxp0 unit 0 family inet address 10.0.0.15/24", "#")
        self.wait_write("delete system license", "#")
        self.wait_write("set system services rest http addresses 10.0.0.15", "#")
        self.wait_write("commit", "#")
        self.wait_write("quit", "#")
        self.logger.info("completed bootstrap configuration")

class VSRX(vrnetlab.VR):
    def __init__(self, username, password):
        super(VSRX, self).__init__(username, password)
        self.vms = [ VSRX_vm(username, password) ]

LOG_FORMAT = "%(asctime)s: %(module)-10s %(levelname)-8s %(message)s"
    logging.basicConfig(format=LOG_FORMAT)
    logger = logging.getLogger()

logger.setLevel(logging.DEBUG)
    logEnv = os.environ.get('LOG_LEVEL')
    if args.trace:
        logger.setLevel(1)
    elif logEnv:
        if logEnv.isnumeric():
            logEnv = int(logEnv)
        try:
            logger.setLevel(logEnv)
        except ValueError:
            print(f'Illegal log level "{logEnv}"', file=sys.stderr)
            sys.exit(1)

vr = VSRX(args.username, args.password)
    vr.start()
07070100000086000081ED00000000000000000000000164A8D17C000002D2000000000000000000000000000000000000003000000000vrnetlab-git1688785276.5a42305/vsrx/get-vsrx.sh#!/bin/bash

IMAGE=$(ls temp/ffp* >/dev/null 2>&1)

if [ ! -f temp/*.qcow2 ]; then

echo -e "Creating temp directory\n"
  mkdir temp

echo -e "Downloading file\n"
  wget -nc -O temp/virtualbox.box https://app.vagrantup.com/juniper/boxes/ffp-12.1X47-D15.4-packetmode/versions/0.5.0/providers/virtualbox.box

echo -e "Extracting Vagrant Box\n"
  tar -xf temp/virtualbox.box -C temp

echo -e "Converting VMDK to QCOW2\n"
  qemu-img convert -f vmdk -O qcow2 temp/packer-virtualbox-ovf-1427461878-disk1.vmdk temp/ffp-12.1X47-D15.4-packetmode.qcow2

echo -e "Moving QCOW2 image to main folder\n"
  mv temp/*.qcow2 .

echo -e "Deleting temp directory\n"
  rm -r temp

else

echo "Image $IMAGE exists. Exiting."

fi
07070100000087000041ED00000000000000000000000364A8D17C00000000000000000000000000000000000000000000002300000000vrnetlab-git1688785276.5a42305/xrv07070100000088000081A400000000000000000000000164A8D17C000001B9000000000000000000000000000000000000002C00000000vrnetlab-git1688785276.5a42305/xrv/MakefileVENDOR=Cisco
NAME=XRv
IMAGE_FORMAT=vmdk
IMAGE_GLOB=*vmdk*

# match versions like:
# iosxrv-k9-demo-5.3.3.51U.vmdk
# iosxrv-k9-demo-6.1.2.vmdk
# iosxrv-k9-demo-6.2.2.15I.DT_IMAGE.vmdk
# iosxrv-k9-demo-6.2.2.1T-dhcpfix.vmdk
# iosxrv-k9-demo-6.2.2.22I.vmdk
VERSION=$(shell echo $(IMAGE) | sed -e 's/.\+[^0-9][^0-9]$[0-9]\.[0-9]\.[0-9]\(\.[0-9A-Z]\+$\?\)$[^0-9].*\|$$$/\1/')

-include ../makefile-sanity.include
-include ../makefile.include
07070100000089000081A400000000000000000000000164A8D17C0000103A000000000000000000000000000000000000002D00000000vrnetlab-git1688785276.5a42305/xrv/README.mdvrnetlab / Cisco IOS XRv
========================
This is the vrnetlab docker image for Cisco IOS XRv.

There are two flavours of virtual XR routers, XRv and XRv9000 where the latter
has a much more complete forwarding plane. This is for XRv, if you have the
XRv9k see the 'xrv9k' directory instead.

It's not recommended to run XRv with less than 4GB of RAM. I have experienced
weird issues when trying to use less RAM.

Building the docker image
-------------------------
Download IOS XRv from
https://upload.cisco.com/cgi-bin/swc/fileexg/main.cgi?CONTYPES=Cisco-IOS-XRv
Put the .vmdk file in this directory and run `make docker-image` and you
should be good to go. The resulting image is called `vr-xrv`. You can tag it
with something else if you want, like `my-repo.example.com/vr-xrv` and then
push it to your repo. The tag is the same as the version of the XRv image,
so if you have iosxrv-k9-demo.vmdk-5.3.3 your final docker image will be called
vr-xrv:5.3.3

Please note that you will always need to specify version when starting your
router as the "latest" tag is not added to any images since it has no meaning
in this context.

It's been tested to boot and respond to SSH with:

* 5.1.1.54U (TeraStream build)
 * 5.1.3 (iosxrv-k9-demo-5.1.3.vmdk)
 * 5.2.2 (iosxrv-k9-demo-5.2.2.vmdk)
 * 5.3.0 (iosxrv-k9-demo-5.3.0.vmdk)
 * 5.3.2 (iosxrv-k9-demo-5.3.2.vmdk)
 * 5.3.3 (iosxrv-k9-demo.vmdk-5.3.3)
 * 5.3.3.51U (TeraStream build)
 * 6.0.0 (iosxrv-k9-demo-6.0.0.vmdk)
 * 6.0.1 (iosxrv-k9-demo.vmdk-6.0.1)

Usage
-----
```
docker run -d --privileged --name my-xrv-router vr-xrv
```
You can run the image with `--privileged` to make use of KVM's hardware
assisted virtualisation, without which CPU emulation will be used instead.
Although I haven't measured, I imagine `--privileged` results in a considerable
performance boost over emulation. Further, emulation mode hasn't been as
thoroughly tested.

It takes about 150 seconds for the virtual router to start and after this we can
login over SSH / NETCONF with the specified credentials.

FUAQ - Frequently or Unfrequently Asked Questions
-------------------------------------------------
##### Q: What is the difference between XRv and XRv9000?
A: Cisco is probably better at giving a thorough answer to this question but
essentially XRv is meant for low-throughput labs while XRv9000 has a much
higher performing forwarding plane that can be used for forwarding of
production traffic.

##### Q: Why not use XRv9000?
A: It seems that all the forwarding plane features that I am looking for are
available in XRv and so there is very little benefit to XRv9000. On the
contrary, XRv supports up to 128 interfaces
(http://www.cisco.com/c/en/us/td/docs/ios_xr_sw/ios_xrv/install_config/b-xrv/b-xrv_chapter_01.html)
with a single VM whereas XRv9000 seems to support up to 11 NICs (see
http://www.cisco.com/c/en/us/td/docs/routers/virtual-routers/configuration/guide/b-xrv9k-cg/b-xrv9k-cg_chapter_0111.html).

##### Q: How many NICs are supported?
A: 128, which is the maximum as specified by Cisco. I use multiple PCI buses to
reach this number and while the current setting is for 128 I have successfully
started XRv with more although I have not done any thorough testing.

##### Q: Is a license required?
A: Yes and no. XRv can run in a demo mode or a production mode, where the
former is free and the latter cost money. The download URL provided earlier is
to the free demo version. In the demo mode there are hard-coded users (i.e. not
very secure for production) and it is rate-limited to a total throughput of
2Mbps.

##### Q: How come CVAC is not used to feed the initial configuration?
A: CVAC uses a virtual CD-ROM drive to feed an initial configuration into XR.
Unfortuately it doesn't support generating crypto keys, which is required for
SSH, and so it cannot replace the serial approach to 100% and therefore I opted
to do everything over the serial interface.
0707010000008A000041ED00000000000000000000000264A8D17C00000000000000000000000000000000000000000000002A00000000vrnetlab-git1688785276.5a42305/xrv/docker0707010000008B000081A400000000000000000000000164A8D17C000001B7000000000000000000000000000000000000003500000000vrnetlab-git1688785276.5a42305/xrv/docker/DockerfileFROM debian:bullseye
MAINTAINER Kristian Larsson <kristian@spritelink.net>

ENV DEBIAN_FRONTEND=noninteractive

RUN apt-get update -qy \
 && apt-get upgrade -qy \
 && apt-get install -y \
    bridge-utils \
    iproute2 \
    python3-ipy \
    socat \
    qemu-kvm \
 && rm -rf /var/lib/apt/lists/*

ARG IMAGE
COPY $IMAGE* /
COPY *.py /

EXPOSE 22 161/udp 830 5000 10000-10099
HEALTHCHECK CMD ["/healthcheck.py"]
ENTRYPOINT ["/launch.py"]
0707010000008C000081ED00000000000000000000000164A8D17C00001A05000000000000000000000000000000000000003400000000vrnetlab-git1688785276.5a42305/xrv/docker/launch.py#!/usr/bin/env python3

import datetime
import logging
import os
import random
import re
import signal
import sys
import telnetlib
import time

import vrnetlab

def handle_SIGCHLD(signal, frame):
    os.waitpid(-1, os.WNOHANG)

def handle_SIGTERM(signal, frame):
    sys.exit(0)

signal.signal(signal.SIGINT, handle_SIGTERM)
signal.signal(signal.SIGTERM, handle_SIGTERM)
signal.signal(signal.SIGCHLD, handle_SIGCHLD)

class XRV_vm(vrnetlab.VM):
    def __init__(self, username, password):
        for e in os.listdir("/"):
            if re.search(".vmdk", e):
                disk_image = "/" + e
        super(XRV_vm, self).__init__(username, password, disk_image=disk_image, ram=3072)
        self.num_nics = 128
        self.credentials = [
                ['admin', 'admin']
            ]

self.xr_ready = False

def bootstrap_spin(self):
        """ 
        """

if self.spins > 300:
            # too many spins with no result ->  give up
            self.stop()
            self.start()
            return

(ridx, match, res) = self.tn.expect([b"Press RETURN to get started",
            b"SYSTEM CONFIGURATION COMPLETE",
            b"Enter root-system username",
            b"Username:", b"^[^ ]+#"], 1)
        if match: # got a match!
            if ridx == 0: # press return to get started, so we press return!
                self.logger.debug("got 'press return to get started...'")
                self.wait_write("", wait=None)
            if ridx == 1: # system configuration complete
                self.logger.info("IOS XR system configuration is complete, should be able to proceed with bootstrap configuration")
                self.wait_write("", wait=None)
                self.xr_ready = True
            if ridx == 2: # initial user config
                self.logger.info("Creating initial user")
                self.wait_write(self.username, wait=None)
                self.wait_write(self.password, wait="Enter secret:")
                self.wait_write(self.password, wait="Enter secret again:")
                self.credentials.insert(0, [self.username, self.password])
            if ridx == 3: # matched login prompt, so should login
                self.logger.debug("matched login prompt")
                try:
                    username, password = self.credentials.pop(0)
                except IndexError as exc:
                    self.logger.error("no more credentials to try")
                    return
                self.logger.debug("trying to log in with %s / %s" % (username, password))
                self.wait_write(username, wait=None)
                self.wait_write(password, wait="Password:")
            if self.xr_ready == True and ridx == 4:
                # run main config!
                self.bootstrap_config()
                # close telnet connection
                self.tn.close()
                # startup time?
                startup_time = datetime.datetime.now() - self.start_time
                self.logger.info("Startup complete in: %s" % startup_time)
                # mark as running
                self.running = True
                return

self.spins += 1

return

def bootstrap_config(self):
        """ Do the actual bootstrap config
        """
        self.logger.info("applying bootstrap configuration")
        self.wait_write("", None)

self.wait_write("terminal length 0")

self.wait_write("crypto key generate rsa")
        # check if we are prompted to overwrite current keys
        (ridx, match, res) = self.tn.expect([b"How many bits in the modulus",
            b"Do you really want to replace them",
            b"^[^ ]+#"], 10)
        if match: # got a match!
            if ridx == 0:
                self.wait_write("2048", None)
            elif ridx == 1: # press return to get started, so we press return!
                self.wait_write("no", None)

# make sure we get our prompt back
        self.wait_write("")

if self.username and self.password:
            self.wait_write("admin")
            self.wait_write("configure")
            self.wait_write("username %s group root-system" % (self.username))
            self.wait_write("username %s group cisco-support" % (self.username))
            self.wait_write("username %s secret %s" % (self.username, self.password))
            self.wait_write("commit")
            self.wait_write("exit")
            self.wait_write("exit")

self.wait_write("show interface description")
        self.wait_write("configure")
        # configure netconf
        self.wait_write("ssh server v2")
        self.wait_write("ssh server netconf port 830") # for 5.1.1
        self.wait_write("ssh server netconf vrf default") # for 5.3.3
        self.wait_write("netconf agent ssh") # for 5.1.1
        self.wait_write("netconf-yang agent ssh") # for 5.3.3

# configure xml agent
        self.wait_write("xml agent tty")

# configure mgmt interface
        self.wait_write("interface MgmtEth 0/0/CPU0/0")
        self.wait_write("no shutdown")
        self.wait_write("ipv4 address 10.0.0.15/24")
        self.wait_write("exit")
        self.wait_write("commit")
        self.wait_write("exit")

class XRV(vrnetlab.VR):
    def __init__(self, username, password):
        super(XRV, self).__init__(username, password)
        self.vms = [ XRV_vm(username, password) ]

LOG_FORMAT = "%(asctime)s: %(module)-10s %(levelname)-8s %(message)s"
    logging.basicConfig(format=LOG_FORMAT)
    logger = logging.getLogger()

logger.setLevel(logging.DEBUG)
    if args.trace:
        logger.setLevel(1)

vr = XRV(args.username, args.password)
    vr.start()
0707010000008D000041ED00000000000000000000000364A8D17C00000000000000000000000000000000000000000000002500000000vrnetlab-git1688785276.5a42305/xrv9k0707010000008E000081A400000000000000000000000164A8D17C00000455000000000000000000000000000000000000002D00000000vrnetlab-git1688785276.5a42305/xrv9k/LICENSEThe MIT License (MIT)

The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
0707010000008F000081A400000000000000000000000164A8D17C00000196000000000000000000000000000000000000002E00000000vrnetlab-git1688785276.5a42305/xrv9k/MakefileVENDOR=Cisco
NAME=XRv9k
IMAGE_FORMAT=qcow2
IMAGE_GLOB=*qcow2*

# match versions like:
# TODO: add example file names here
# xrv9k-fullk9-x.vrr-6.1.3.qcow2
# xrv9k-fullk9-x.vrr-6.2.1.qcow2
VERSION=$(shell echo $(IMAGE) | sed -e 's/.\+[^0-9]$[0-9]\.[0-9]\.[0-9]\(\.[0-9A-Z]\+$\?\)$[^0-9].*\|$$$/\1/')

-include ../makefile-sanity.include
-include ../makefile.include
-include ../makefile-install.include
07070100000090000081A400000000000000000000000164A8D17C00000E39000000000000000000000000000000000000002F00000000vrnetlab-git1688785276.5a42305/xrv9k/README.mdvrnetlab / Cisco IOS XRv9k
==========================
This is the vrnetlab docker image for Cisco IOS XRv9k.

There are two flavours of virtual XR routers, XRv and XRv9k where the latter
has a much more complete forwarding plane. This is for XRv9k if you have the
non-9k see the 'xrv' directory instead.

I've not tested XRv9k with less than 4 cores and 8G of RAM.

Building the docker image
-------------------------
Obtain the XRv9k release from Cisco. They generally ship an iso for a custom
install as well as a pre-built qcow2 image. Some releases the pre-built qcow2
is quite large, so making your own from the iso is recommended. At some point
we may support creating qcow2 from iso in vrnetlab, but that is currently not
supported.

Put the .qcow2 file in this directory and run `make docker-image` and you
should be good to go. The resulting image is called `vr-xrv9k`. You can tag it
with something else if you want, like `my-repo.example.com/vr-xrv` and then
push it to your repo. The tag is the same as the version of the XRv9k image,
so if you have xrv9k-fullk9-x.vrr-6.2.1.qcow2 your final docker image will be 
called vr-xrv9k:6.2.1

Please note that you will always need to specify version when starting your
router as the "latest" tag is not added to any images since it has no meaning
in this context.

It's been tested to boot and respond to SSH with:

* 6.1.3 (xrv9k-fullk9-x.vrr-6.1.3.qcow2)
 * 6.2.1 (xrv9k-fullk9-x.vrr-6.2.1.qcow2)
 * xrv9k-fullk9-x-6.4.2.qcow2	MD5:6958763192c7bb59a1b8049d377de1b4

Usage
-----
```
docker run -d --privileged --name my-xrv-router vr-xrv9k
```
You can run the image with `--privileged` to make use of KVM's hardware
assisted virtualisation, without which CPU emulation will be used instead.
Although I haven't measured, I imagine `--privileged` results in a considerable
performance boost over emulation. Further, emulation mode hasn't been as
thoroughly tested.

It takes about 150 seconds for the virtual router to start and after this we can
login over SSH / NETCONF with the specified credentials.

FUAQ - Frequently or Unfrequently Asked Questions
-------------------------------------------------
##### Q: What is the difference between XRv and XRv9k?
A: Cisco is probably better at giving a thorough answer to this question but
essentially XRv is meant for low-throughput labs while XRv9k has a much
higher performing forwarding plane that can be used for forwarding of
production traffic.

##### Q: How many NICs are supported?
A: Cisco specifies a maximum of 11 NICs but that seems to be balooney as it
successfully starts with 226 NICs. Be aware though that the startup time scales
linearly with the number of interfaces so unless you actually need a lot of
interfaces it is better to start it with fewer. The default is set to 24 which
felt like a good compromise and also means only a single PCI bus is needed,
which just felt like a good thing.

##### Q: Is a license required?
A: Yes and no. XRv9k can run in a demo mode or a production mode, where the
former is free and the latter cost money.

##### Q: How come CVAC is not used to feed the initial configuration?
A: CVAC uses a virtual CD-ROM drive to feed an initial configuration into XR.
Unfortuately it doesn't support generating crypto keys, which is required for
SSH, and so it cannot replace the serial approach to 100% and therefore I opted
to do everything over the serial interface.
07070100000091000041ED00000000000000000000000264A8D17C00000000000000000000000000000000000000000000002C00000000vrnetlab-git1688785276.5a42305/xrv9k/docker07070100000092000081A400000000000000000000000164A8D17C000001BC000000000000000000000000000000000000003700000000vrnetlab-git1688785276.5a42305/xrv9k/docker/DockerfileFROM debian:bullseye
MAINTAINER Kristian Larsson <kristian@spritelink.net>

ENV DEBIAN_FRONTEND=noninteractive

RUN apt-get update -qy \
 && apt-get upgrade -qy \
 && apt-get install -y \
    bridge-utils \
    iproute2 \
    python3-ipy \
    socat \
    qemu-kvm \
 && rm -rf /var/lib/apt/lists/*

ARG IMAGE
COPY $IMAGE* /
COPY *.py /

EXPOSE 22 161/udp 830 5000-5003 10000-10099
HEALTHCHECK CMD ["/healthcheck.py"]
ENTRYPOINT ["/launch.py"]
07070100000093000081ED00000000000000000000000164A8D17C0000244F000000000000000000000000000000000000003600000000vrnetlab-git1688785276.5a42305/xrv9k/docker/launch.py#!/usr/bin/env python3

import datetime
import logging
import os
import random
import re
import signal
import sys
import telnetlib
import time

import vrnetlab

def handle_SIGCHLD(signal, frame):
    os.waitpid(-1, os.WNOHANG)

def handle_SIGTERM(signal, frame):
    sys.exit(0)

signal.signal(signal.SIGINT, handle_SIGTERM)
signal.signal(signal.SIGTERM, handle_SIGTERM)
signal.signal(signal.SIGCHLD, handle_SIGCHLD)

class XRV_vm(vrnetlab.VM):
    def __init__(self, username, password, ram, nics, install_mode=False):
        for e in os.listdir("/"):
            if re.search(".qcow2", e):
                disk_image = "/" + e
        super(XRV_vm, self).__init__(username, password, disk_image=disk_image,
                                     ram=ram*1024)
        self.num_nics = nics
        self.install_mode = install_mode
        self.qemu_args.extend(["-cpu", "host",
                               "-smp", "cores=4,threads=1,sockets=1",
                               "-serial", "telnet:0.0.0.0:50%02d,server,nowait" % (self.num + 1),
                               "-serial", "telnet:0.0.0.0:50%02d,server,nowait" % (self.num + 2),
                               "-serial", "telnet:0.0.0.0:50%02d,server,nowait" % (self.num + 3)])
        self.credentials = [
                ['admin', 'admin']
            ]

self.xr_ready = False

def gen_mgmt(self):
        """ Generate qemu args for the mgmt interface(s)
        """
        res = []
        # mgmt interface
        res.extend(["-device", "virtio-net-pci,netdev=mgmt,mac=%s" % vrnetlab.gen_mac(0)])
        res.extend(["-netdev", "user,id=mgmt,net=10.0.0.0/24,tftp=/tftpboot,%s" % self.gen_host_forwards()])
        # dummy interface for xrv9k ctrl interface
        res.extend(["-device", "virtio-net-pci,netdev=ctrl-dummy,id=ctrl-dummy,mac=%s" % vrnetlab.gen_mac(0),
                    "-netdev", "tap,ifname=ctrl-dummy,id=ctrl-dummy,script=no,downscript=no"])
        # dummy interface for xrv9k dev interface
        res.extend(["-device", "virtio-net-pci,netdev=dev-dummy,id=dev-dummy,mac=%s" % vrnetlab.gen_mac(0),
                    "-netdev", "tap,ifname=dev-dummy,id=dev-dummy,script=no,downscript=no"])

return res

def bootstrap_spin(self):
        """ 
        """

if self.spins > 300:
            # too many spins with no result ->  give up
            self.stop()
            self.start()
            return

(ridx, match, res) = self.tn.expect([b"Press RETURN to get started",
            b"Not settable: Success",    # no SYSTEM CONFIGURATION COMPLETE in xrv9k?
            b"Enter root-system username",
            b"Username:", b"ios#"], 1)
        if match: # got a match!
            if ridx == 0: # press return to get started, so we press return!
                self.logger.debug("got 'press return to get started...'")
                self.wait_write("", wait=None)
            if ridx == 1: # system configuration complete
                self.logger.info("IOS XR system configuration is complete, should be able to proceed with bootstrap configuration")
                self.wait_write("", wait=None)
                self.xr_ready = True
            if ridx == 2: # initial user config
                if self.install_mode:
                    self.running = True
                    return
                self.logger.info("Creating initial user")
                self.wait_write(self.username, wait=None)
                self.wait_write(self.password, wait="Enter secret:")
                self.wait_write(self.password, wait="Enter secret again:")
                self.credentials.insert(0, [self.username, self.password])
            if ridx == 3: # matched login prompt, so should login
                self.logger.debug("matched login prompt")
                try:
                    username, password = self.credentials.pop(0)
                except IndexError as exc:
                    self.logger.error("no more credentials to try")
                    return
                self.logger.debug("trying to log in with %s / %s" % (username, password))
                self.wait_write(username, wait=None)
                self.wait_write(password, wait="Password:")
                self.logger.debug("logged in with %s / %s" % (username, password))
            if self.xr_ready == True and ridx == 4:
                # run main config!
                if not self.bootstrap_config():
                    # main config failed :/
                    self.logger.debug('bootstrap_config failed, restarting device')
                    self.stop()
                    self.start()
                    return

# close telnet connection
                self.tn.close()
                # startup time?
                startup_time = datetime.datetime.now() - self.start_time
                self.logger.info("Startup complete in: %s" % startup_time)
                # mark as running
                self.running = True
                return

self.spins += 1

return

def bootstrap_config(self):
        """ Do the actual bootstrap config
        """
        self.logger.info("applying bootstrap configuration")
        self.wait_write("", None)

self.wait_write("terminal length 0")

# make sure we get our prompt back
        self.wait_write("")

# wait for Gi0/0/0/0 in config
        if not self.wait_config("show interfaces description", "Gi0/0/0/0"):
            return False

# wait for call-home in config
        if not self.wait_config("show running-config call-home", "service active"):
            return False

self.wait_write("configure")
        # configure netconf
        self.wait_write("ssh server v2")
        self.wait_write("ssh server netconf port 830") # for 5.1.1
        self.wait_write("ssh server netconf vrf default") # for 5.3.3
        self.wait_write("netconf agent ssh") # for 5.1.1
        self.wait_write("netconf-yang agent ssh") # for 5.3.3

# configure xml agent
        self.wait_write("xml agent tty")

# configure mgmt interface
        self.wait_write("interface MgmtEth 0/RP0/CPU0/0")
        self.wait_write("no shutdown")
        self.wait_write("ipv4 address 10.0.0.15/24")
        self.wait_write("exit")
        self.wait_write("commit")
        self.wait_write("exit")

return True

class XRV_Installer(vrnetlab.VR_Installer):
    """ XRV installer

Will start the XRV and then shut it down. Booting the XRV for the
        first time requires the XRV itself to install internal packages
        then it will restart. Subsequent boots will not require this restart.
        By running this "install" when building the docker image we can
        decrease the normal startup time of the XRV.
    """
    def __init__(self, username, password, ram, nics):
        super().__init__()
        self.vm = XRV_vm(username, password, ram, nics, install_mode=True)

class XRV(vrnetlab.VR):
    def __init__(self, username, password, ram, nics):
        super(XRV, self).__init__(username, password)
        self.vms = [ XRV_vm(username, password, ram, nics) ]

if __name__ == '__main__':
    import argparse
    parser = argparse.ArgumentParser(description='')
    parser.add_argument('--trace', action='store_true', help='enable trace level logging')
    parser.add_argument('--username', default='vrnetlab', help='Username')
    parser.add_argument('--password', default='VR-netlab9', help='Password')
    parser.add_argument('--install',  action='store_true', help='Initial install')
    parser.add_argument('--num-nics', type=int, default=24, help='Number of NICS')
    parser.add_argument('--ram', type=int, default=16, help='RAM in GB')
    args = parser.parse_args()

LOG_FORMAT = "%(asctime)s: %(module)-10s %(levelname)-8s %(message)s"
    logging.basicConfig(format=LOG_FORMAT)
    logger = logging.getLogger()

logger.setLevel(logging.DEBUG)
    if args.trace:
        logger.setLevel(1)

if args.install:
        vr = XRV_Installer(args.username, args.password, args.ram, args.num_nics)
        vr.install()
    else:
        vr = XRV(args.username, args.password, args.ram, args.num_nics)
        vr.start()
07070100000000000000000000000000000000000000010000000000000000000000000000000000000000000000000000000B00000000TRAILER!!!726 blocks

Places

File _service:obs_scm:vrnetlab-git1688785276.5a42305.obscpio of Package vrnetlab (Revision 20a56e72d3fc751293df0452a2e4d163)

Places