File 0007-Revert-Remove-support-for-driver-wcte11xp.... of Package dahdi-linux

Overview Repositories Revisions Requests Users Attributes Meta

File 0007-Revert-Remove-support-for-driver-wcte11xp.patch of Package dahdi-linux (Revision 6d25e4e40c68fcb99607fa21e20398f8)

Currently displaying revision 6d25e4e40c68fcb99607fa21e20398f8 , Show latest

From e840bc3ea1933168bb9fae68d1a4c6bd647ea821 Mon Sep 17 00:00:00 2001
From: Harald Welte <laforge@osmocom.org>
Date: Fri, 6 Nov 2020 17:21:35 +0100
Subject: [PATCH 07/10] Revert "Remove support for driver wcte11xp."

This reverts commit 3748456d22122cf807b47d5cf6e2ff23183f440d,
which removed a driver simply becuase Digium proclaimed they didn't
sell a card in 10 years.  That does *not* mean nobody is using those
anymore.

I wish there was more of a community maitaining the DAHDI drivers.
---
 drivers/dahdi/Kbuild     |    1 +
 drivers/dahdi/Kconfig    |   10 +
 drivers/dahdi/wcte11xp.c | 1657 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 1668 insertions(+)
 create mode 100644 drivers/dahdi/wcte11xp.c

diff --git a/drivers/dahdi/Kbuild b/drivers/dahdi/Kbuild
index 855e5bf..1a18c0e 100644
--- a/drivers/dahdi/Kbuild
+++ b/drivers/dahdi/Kbuild
@@ -38,6 +38,7 @@ endif
 obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_VOICEBUS)		+= voicebus/
 obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_WCB4XXP)		+= wcb4xxp/
 
+obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_WCTE11XP)		+= wcte11xp.o
 
 endif
 
diff --git a/drivers/dahdi/Kconfig b/drivers/dahdi/Kconfig
index 5b94bf1..faa6c8b 100644
--- a/drivers/dahdi/Kconfig
+++ b/drivers/dahdi/Kconfig
@@ -223,4 +223,14 @@ config DAHDI_DYNAMIC_LOC
 	  If unsure, say Y.
 
 
+config DAHDI_WCTE11XP
+	tristate "Digium Wildcard TE110P Support"
+	depends on DAHDI && PCI
+	default DAHDI
+	---help---
+	  To compile this driver as a module, choose M here: the
+	  module will be called wcte11xp.
+
+	  If unsure, say Y.
+
 source "drivers/dahdi/xpp/Kconfig"
diff --git a/drivers/dahdi/wcte11xp.c b/drivers/dahdi/wcte11xp.c
new file mode 100644
index 0000000..044787f
--- /dev/null
+++ b/drivers/dahdi/wcte11xp.c
@@ -0,0 +1,1657 @@
+/*
+ * Digium, Inc.  Wildcard TE110P T1/PRI card Driver
+ *
+ * Written by Mark Spencer <markster@digium.com>
+ *            Matthew Fredrickson <creslin@digium.com>
+ *            William Meadows <wmeadows@digium.com>
+ *
+ * Copyright (C) 2004, Digium, Inc.
+ *
+ * All rights reserved.
+ */
+
+/*
+ * See http://www.asterisk.org for more information about
+ * the Asterisk project. Please do not directly contact
+ * any of the maintainers of this project for assistance;
+ * the project provides a web site, mailing lists and IRC
+ * channels for your use.
+ *
+ * This program is free software, distributed under the terms of
+ * the GNU General Public License Version 2 as published by the
+ * Free Software Foundation. See the LICENSE file included with
+ * this program for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+
+#include <dahdi/kernel.h>
+
+/* XXX: fix this */
+#include "wct4xxp/wct4xxp.h"	/* For certain definitions */
+
+#define WC_MAX_CARDS	32
+
+/*
+#define TEST_REGS
+*/
+
+/* Define to get more attention-grabbing but slightly more I/O using
+   alarm status */
+#define FANCY_ALARM
+
+/* Define to enable the V2.1 errata register settings */
+#if 0
+#define TRUST_INFINEON_ERRATA
+#endif
+
+#define DELAY	0x0	/* 30 = 15 cycles, 10 = 8 cycles, 0 = 3 cycles */
+
+#define WC_CNTL    	0x00
+#define WC_OPER		0x01
+#define WC_AUXC    	0x02
+#define WC_AUXD    	0x03
+#define WC_MASK0   	0x04
+#define WC_MASK1   	0x05
+#define WC_INTSTAT 	0x06
+
+#define WC_DMAWS	0x08
+#define WC_DMAWI	0x0c
+#define WC_DMAWE	0x10
+#define WC_DMARS	0x18
+#define WC_DMARI	0x1c
+#define WC_DMARE	0x20
+#define WC_CURPOS	0x24
+
+#define WC_SERC		0x2d
+#define WC_FSCDELAY	0x2f
+
+#define WC_USERREG	0xc0
+
+#define WC_CLOCK	0x0
+#define WC_LEDTEST	0x1
+#define WC_VERSION	0x2
+
+/* Offset between transmit and receive */
+#define WC_OFFSET	4
+
+#define BIT_CS		(1 << 7)
+#define BIT_ADDR	(0xf << 3)
+
+#define BIT_LED1	(1 << 0)
+#define BIT_LED0	(1 << 1)
+#define BIT_TEST	(1 << 2)
+
+#define FLAG_STARTED 		(1 << 0)
+#define FLAG_NMF 			(1 << 1)
+#define FLAG_SENDINGYELLOW 	(1 << 2)
+#define FLAG_FALC12			(1 << 3)
+
+#define	TYPE_T1	1		/* is a T1 card */
+#define	TYPE_E1	2		/* is an E1 card */
+
+static int chanmap_t1[] = 
+{ 2,1,0,
+  6,5,4,
+  10,9,8,
+  14,13,12,
+  18,17,16,
+  22,21,20,
+  26,25,24,
+  30,29,28 };
+
+static int chanmap_e1[] = 
+{ 2,1,0,
+  7,6,5,4,
+  11,10,9,8,
+  15,14,13,12,
+  19,18,17,16,
+  23,22,21,20,
+  27,26,25,24,
+  31,30,29,28 };
+
+static int chanmap_e1uc[] =
+{ 3,2,1,0,
+  7,6,5,4,
+  11,10,9,8,
+  15,14,13,12,
+  19,18,17,16,
+  23,22,21,20,
+  27,26,25,24,
+  31,30,29,28 };
+
+
+#ifdef FANCY_ALARM
+static int altab[] = {
+0, 0, 0, 1, 2, 3, 4, 6, 8, 9, 11, 13, 16, 18, 20, 22, 24, 25, 27, 28, 29, 30, 31, 31, 32, 31, 31, 30, 29, 28, 27, 25, 23, 22, 20, 18, 16, 13, 11, 9, 8, 6, 4, 3, 2, 1, 0, 0, 
+};
+#endif
+
+struct t1 {
+	struct pci_dev *dev;
+	spinlock_t lock;
+	int spantype;
+	int spanflags;		/* Span flags */
+	unsigned char txsigs[16];  /* Copy of tx sig registers */
+	int num;
+	int alarmcount;			/* How much red alarm we've seen */
+	int alarmdebounce;
+	/* Our offset for finding channel 1 */
+	int offset;
+	char *variety;
+	unsigned int intcount;
+	int usecount;
+	int clocktimeout;
+	int sync;
+	int dead;
+	int blinktimer;
+	int alarmtimer;
+	int checktiming;	/* Set >0 to cause the timing source to be checked */
+	int loopupcnt;
+	int loopdowncnt;
+	int miss;
+	int misslast;
+	int *chanmap;
+#ifdef FANCY_ALARM
+	int alarmpos;
+#endif
+	unsigned char ledtestreg;
+	unsigned char outbyte;
+	unsigned long ioaddr;
+	unsigned short canary;
+	/* T1 signalling */
+	dma_addr_t 	readdma;
+	dma_addr_t	writedma;
+	volatile unsigned char *writechunk;					/* Double-word aligned write memory */
+	volatile unsigned char *readchunk;					/* Double-word aligned read memory */
+	unsigned char ec_chunk1[32][DAHDI_CHUNKSIZE];
+	unsigned char ec_chunk2[32][DAHDI_CHUNKSIZE];
+	unsigned char tempo[33];
+	struct dahdi_device *ddev;
+	struct dahdi_span span;						/* Span */
+	struct dahdi_chan *chans[32];					/* Channels */
+};
+
+#define CANARY 0xca1e
+
+static int debug = 0;   /* doesnt do anything */
+static int j1mode = 0;
+static int alarmdebounce = 0;
+static int loopback = 0;
+static int clockextra = 0;
+static int t1e1override = -1;
+static int unchannelized = 0;
+
+static struct t1 *cards[WC_MAX_CARDS];
+
+static inline void start_alarm(struct t1 *wc)
+{
+#ifdef FANCY_ALARM
+	wc->alarmpos = 0;
+#endif
+	wc->blinktimer = 0;
+}
+
+static inline void stop_alarm(struct t1 *wc)
+{
+#ifdef FANCY_ALARM
+	wc->alarmpos = 0;
+#endif
+	wc->blinktimer = 0;
+}
+
+static inline void __select_framer(struct t1 *wc, int reg)
+{
+	/* Top four bits of address from AUX 6-3 */
+	wc->outbyte &= ~BIT_CS;
+	wc->outbyte &= ~BIT_ADDR;
+	wc->outbyte |= (reg & 0xf0) >> 1;
+	outb(wc->outbyte, wc->ioaddr + WC_AUXD);
+}
+
+static inline void __select_control(struct t1 *wc)
+{
+	if (!(wc->outbyte & BIT_CS)) {
+		wc->outbyte |= BIT_CS;
+		outb(wc->outbyte, wc->ioaddr + WC_AUXD);
+	}
+}
+
+static int _t1xxp_open(struct dahdi_chan *chan)
+{
+	struct t1 *wc = chan->pvt;
+	if (wc->dead)
+		return -ENODEV;
+	wc->usecount++;
+
+	return 0;
+}
+
+static int t1xxp_open(struct dahdi_chan *chan)
+{
+	unsigned long flags;
+	int res;
+	spin_lock_irqsave(&chan->lock, flags);
+	res = _t1xxp_open(chan);
+	spin_unlock_irqrestore(&chan->lock, flags);
+	return res;
+}
+
+static int __control_set_reg(struct t1 *wc, int reg, unsigned char val)
+{
+	__select_control(wc);
+	outb(val, wc->ioaddr + WC_USERREG + ((reg & 0xf) << 2));
+	return 0;
+}
+
+static int control_set_reg(struct t1 *wc, int reg, unsigned char val)
+{
+	unsigned long flags;
+	int res;
+	spin_lock_irqsave(&wc->lock, flags);
+	res = __control_set_reg(wc, reg, val);
+	spin_unlock_irqrestore(&wc->lock, flags);
+	return res;
+}
+
+static int __control_get_reg(struct t1 *wc, int reg)
+{
+	unsigned char res;
+	/* The following makes UTTERLY no sense, but what was happening
+	   was that reads in some cases were not actually happening
+	   on the physical bus. Why, we dunno. But in debugging, we found
+	   that writing before reading (in this case to an unused position)
+	   seems to get rid of the problem */
+	__control_set_reg(wc,3,0x69); /* do magic here */
+	/* now get the read byte from the Xilinx part */
+	res = inb(wc->ioaddr + WC_USERREG + ((reg & 0xf) << 2));
+	return res;
+}
+
+static int control_get_reg(struct t1 *wc, int reg)
+{
+	unsigned long flags;
+	int res;
+	spin_lock_irqsave(&wc->lock, flags);
+	res = __control_get_reg(wc, reg);
+	spin_unlock_irqrestore(&wc->lock, flags);
+	return res;
+}
+
+static inline unsigned int __t1_framer_in(struct t1 *wc, const unsigned int reg)
+{
+	unsigned char res;
+	__select_framer(wc, reg);
+	/* Get value */
+	res = inb(wc->ioaddr + WC_USERREG + ((reg & 0xf) << 2));
+	return res;
+#if 0
+	unsigned int ret;
+	__t1_pci_out(wc, WC_LADDR, (unit << 8) | (addr & 0xff));
+	__t1_pci_out(wc, WC_LADDR, (unit << 8) | (addr & 0xff) | ( 1 << 10) | WC_LREAD);
+	ret = __t1_pci_in(wc, WC_LDATA);
+	__t1_pci_out(wc, WC_LADDR, 0);
+	return ret & 0xff;
+#endif	
+}
+
+static inline unsigned int t1_framer_in(struct t1 *wc, const unsigned int addr)
+{
+	unsigned long flags;
+	unsigned int ret;
+	spin_lock_irqsave(&wc->lock, flags);
+	ret = __t1_framer_in(wc, addr);
+	spin_unlock_irqrestore(&wc->lock, flags);
+	return ret;
+
+}
+
+static inline void __t1_framer_out(struct t1 *wc, const unsigned int reg, const unsigned int val)
+{
+	if (debug > 1)
+		printk(KERN_DEBUG "Writing %02x to address %02x\n", val, reg);
+	__select_framer(wc, reg);
+	/* Send address */
+	outb(val, wc->ioaddr + WC_USERREG + ((reg & 0xf) << 2));
+#if 0
+	__t1_pci_out(wc, WC_LADDR, (unit << 8) | (addr & 0xff));
+	__t1_pci_out(wc, WC_LDATA, value);
+	__t1_pci_out(wc, WC_LADDR, (unit << 8) | (addr & 0xff) | (1 << 10));
+	__t1_pci_out(wc, WC_LADDR, (unit << 8) | (addr & 0xff) | (1 << 10) | WC_LWRITE);
+	__t1_pci_out(wc, WC_LADDR, (unit << 8) | (addr & 0xff) | (1 << 10));
+	__t1_pci_out(wc, WC_LADDR, (unit << 8) | (addr & 0xff));	
+	__t1_pci_out(wc, WC_LADDR, 0);
+	if (debug) printk(KERN_DEBUG "Write complete\n");
+#endif	
+#if 0
+	{ unsigned int tmp;
+	tmp = t1_framer_in(wc, unit, addr);
+	if (tmp != value) {
+		printk(KERN_DEBUG "Expected %d from unit %d register %d but got %d instead\n", value, unit, addr, tmp);
+	} }
+#endif	
+}
+
+static inline void t1_framer_out(struct t1 *wc, const unsigned int addr, const unsigned int value)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&wc->lock, flags);
+	__t1_framer_out(wc, addr, value);
+	spin_unlock_irqrestore(&wc->lock, flags);
+}
+
+static void t1xxp_release(struct t1 *wc)
+{
+	unsigned int x;
+
+	dahdi_unregister_device(wc->ddev);
+	for (x = 0; x < (wc->spantype == TYPE_E1 ? 31 : 24); x++) {
+		kfree(wc->chans[x]);
+	}
+	kfree(wc->ddev->location);
+	dahdi_free_device(wc->ddev);
+	kfree(wc);
+	printk(KERN_INFO "Freed a Wildcard\n");
+}
+
+static int t1xxp_close(struct dahdi_chan *chan)
+{
+	struct t1 *wc = chan->pvt;
+
+	wc->usecount--;
+	/* If we're dead, release us now */
+	if (!wc->usecount && wc->dead) 
+		t1xxp_release(wc);
+	return 0;
+}
+
+static void t1xxp_enable_interrupts(struct t1 *wc)
+{
+	/* Clear interrupts */
+	outb(0xff, wc->ioaddr + WC_INTSTAT);
+	/* Enable interrupts (we care about all of them) */
+	outb(0x3c /* 0x3f */, wc->ioaddr + WC_MASK0); 
+	/* No external interrupts */
+	outb(0x00, wc->ioaddr + WC_MASK1);
+	if (debug) printk(KERN_DEBUG "Enabled interrupts!\n");
+}
+
+static void t1xxp_start_dma(struct t1 *wc)
+{
+	/* Reset Master and TDM */
+	outb(DELAY | 0x0f, wc->ioaddr + WC_CNTL);
+	set_current_state(TASK_INTERRUPTIBLE);
+	schedule_timeout(1);
+	outb(DELAY | 0x01, wc->ioaddr + WC_CNTL);
+	outb(0x01, wc->ioaddr + WC_OPER);
+	if (debug) printk(KERN_DEBUG "Started DMA\n");
+	outb(0x03, wc->ioaddr + WC_OPER);
+	outb(0x01, wc->ioaddr + WC_OPER);
+}
+
+static void __t1xxp_stop_dma(struct t1 *wc)
+{
+	outb(0x00, wc->ioaddr + WC_OPER);
+}
+
+static void __t1xxp_disable_interrupts(struct t1 *wc)	
+{
+	outb(0x00, wc->ioaddr + WC_MASK0);
+	outb(0x00, wc->ioaddr + WC_MASK1);
+}
+
+static void __t1xxp_set_clear(struct t1 *wc)
+{
+	int i,j;
+	unsigned short val=0;
+	for (i=0;i<24;i++) {
+		j = (i/8);
+		if (wc->span.chans[i]->flags & DAHDI_FLAG_CLEAR) 
+			val |= 1 << (7 - (i % 8));
+		if ((i % 8)==7) {
+			if (debug > 1)
+				printk(KERN_DEBUG "Putting %d in register %02x\n",
+			       val, 0x2f + j);
+			__t1_framer_out(wc, 0x2f + j, val);
+			val = 0;
+		}
+	}
+}
+
+static int t1xxp_ioctl(struct dahdi_chan *chan, unsigned int cmd, unsigned long data)
+{
+	struct t4_regs regs;
+	int x;
+	struct t1 *wc;
+	switch(cmd) {
+	case WCT4_GET_REGS:
+		wc = chan->pvt;
+		for (x=0;x<NUM_PCI;x++)
+#if 1
+			regs.pci[x] = (inb(wc->ioaddr + (x << 2))) |
+				       (inb(wc->ioaddr + (x << 2) + 1) << 8) |
+					(inb(wc->ioaddr + (x << 2) + 2) << 16) |
+					 (inb(wc->ioaddr + (x << 2) + 3) << 24);
+#else
+			regs.pci[x] = (inb(wc->ioaddr + x));
+#endif
+
+		for (x=0;x<NUM_REGS;x++)
+			regs.regs[x] = t1_framer_in(wc, x);
+		if (copy_to_user((__user void *)data, &regs, sizeof(regs)))
+			return -EFAULT;
+		break;
+	default:
+		return -ENOTTY;
+	}
+	return 0;
+}
+
+static inline struct t1 *t1_from_span(struct dahdi_span *span)
+{
+	return container_of(span, struct t1, span);
+}
+
+static int t1xxp_maint(struct dahdi_span *span, int cmd)
+{
+	struct t1 *wc = t1_from_span(span);
+
+	if (wc->spantype == TYPE_E1) {
+		switch(cmd) {
+		case DAHDI_MAINT_NONE:
+			printk(KERN_INFO "XXX Turn off local and remote loops E1 XXX\n");
+			break;
+		case DAHDI_MAINT_LOCALLOOP:
+			printk(KERN_INFO "XXX Turn on local loopback E1 XXX\n");
+			break;
+		case DAHDI_MAINT_REMOTELOOP:
+			printk(KERN_INFO "XXX Turn on remote loopback E1 XXX\n");
+			break;
+		case DAHDI_MAINT_LOOPUP:
+			printk(KERN_INFO "XXX Send loopup code E1 XXX\n");
+			break;
+		case DAHDI_MAINT_LOOPDOWN:
+			printk(KERN_INFO "XXX Send loopdown code E1 XXX\n");
+			break;
+		default:
+			printk(KERN_NOTICE "TE110P: Unknown E1 maint command: %d\n", cmd);
+			break;
+		}
+	} else {
+		switch(cmd) {
+	    case DAHDI_MAINT_NONE:
+			printk(KERN_INFO "XXX Turn off local and remote loops T1 XXX\n");
+			t1_framer_out(wc, 0x21, 0x40);
+			break;
+	    case DAHDI_MAINT_LOCALLOOP:
+			printk(KERN_INFO "XXX Turn on local loop and no remote loop XXX\n");
+			break;
+	    case DAHDI_MAINT_REMOTELOOP:
+			printk(KERN_INFO "XXX Turn on remote loopup XXX\n");
+			break;
+	    case DAHDI_MAINT_LOOPUP:
+			t1_framer_out(wc, 0x21, 0x50);	/* FMR5: Nothing but RBS mode */
+			break;
+	    case DAHDI_MAINT_LOOPDOWN:
+			t1_framer_out(wc, 0x21, 0x60);	/* FMR5: Nothing but RBS mode */
+			break;
+	    default:
+			printk(KERN_NOTICE "TE110P: Unknown T1 maint command: %d\n", cmd);
+			break;
+	   }
+    }
+	return 0;
+}
+
+static int t1xxp_rbsbits(struct dahdi_chan *chan, int bits)
+{
+	u_char m,c;
+	int n,b;
+	struct t1 *wc = chan->pvt;
+	unsigned long flags;
+	
+	if(debug > 1) printk(KERN_DEBUG "Setting bits to %d on channel %s\n", bits, chan->name);
+	spin_lock_irqsave(&wc->lock, flags);	
+	if (wc->spantype == TYPE_E1) { /* do it E1 way */
+		if (chan->chanpos == 16) {
+			spin_unlock_irqrestore(&wc->lock, flags);
+			return 0;
+		}
+		n = chan->chanpos - 1;
+		if (chan->chanpos > 15) n--;
+		b = (n % 15);
+		c = wc->txsigs[b];
+		m = (n / 15) << 2; /* nibble selector */
+		c &= (0xf << m); /* keep the other nibble */
+		c |= (bits & 0xf) << (4 - m); /* put our new nibble here */
+		wc->txsigs[b] = c;
+		  /* output them to the chip */
+		__t1_framer_out(wc,0x71 + b,c); 
+	} else if (wc->span.lineconfig & DAHDI_CONFIG_D4) {
+		n = chan->chanpos - 1;
+		b = (n/4);
+		c = wc->txsigs[b];
+		m = ((3 - (n % 4)) << 1); /* nibble selector */
+		c &= ~(0x3 << m); /* keep the other nibble */
+		c |= ((bits >> 2) & 0x3) << m; /* put our new nibble here */
+		wc->txsigs[b] = c;
+		  /* output them to the chip */
+		__t1_framer_out(wc,0x70 + b,c); 
+		__t1_framer_out(wc,0x70 + b + 6,c); 
+	} else if (wc->span.lineconfig & DAHDI_CONFIG_ESF) {
+		n = chan->chanpos - 1;
+		b = (n/2);
+		c = wc->txsigs[b];
+		m = ((n % 2) << 2); /* nibble selector */
+		c &= (0xf << m); /* keep the other nibble */
+		c |= (bits & 0xf) << (4 - m); /* put our new nibble here */
+		wc->txsigs[b] = c;
+		  /* output them to the chip */
+		__t1_framer_out(wc,0x70 + b,c); 
+	} 
+	spin_unlock_irqrestore(&wc->lock, flags);
+	if (debug > 1)
+		printk(KERN_DEBUG "Finished setting RBS bits\n");
+	return 0;
+}
+
+static void t1_check_sigbits(struct t1 *wc)
+{
+	int a,i,rxs;
+	unsigned long flags;
+
+	if (!(wc->span.flags & DAHDI_FLAG_RUNNING))
+		return;
+
+	spin_lock_irqsave(&wc->lock, flags);
+
+	if (wc->spantype == TYPE_E1) {
+		for (i = 0; i < 15; i++) {
+			a = __t1_framer_in(wc, 0x71 + i);
+			/* Get high channel in low bits */
+			rxs = (a & 0xf);
+			if (!(wc->span.chans[i+16]->sig & DAHDI_SIG_CLEAR)) {
+				if (wc->span.chans[i+16]->rxsig != rxs) {
+					spin_unlock_irqrestore(&wc->lock, flags);
+					dahdi_rbsbits(wc->span.chans[i+16], rxs);
+					spin_lock_irqsave(&wc->lock, flags);
+				}
+			}
+			rxs = (a >> 4) & 0xf;
+			if (!(wc->span.chans[i]->sig & DAHDI_SIG_CLEAR)) {
+				if (wc->span.chans[i]->rxsig != rxs) {
+					spin_unlock_irqrestore(&wc->lock, flags);
+					dahdi_rbsbits(wc->span.chans[i], rxs);
+					spin_lock_irqsave(&wc->lock, flags);
+				}
+			}
+		}
+	} else if (wc->span.lineconfig & DAHDI_CONFIG_D4) {
+		for (i = 0; i < 24; i+=4) {
+			a = __t1_framer_in(wc, 0x70 + (i>>2));
+			/* Get high channel in low bits */
+			rxs = (a & 0x3) << 2;
+			if (!(wc->span.chans[i+3]->sig & DAHDI_SIG_CLEAR)) {
+				if (wc->span.chans[i+3]->rxsig != rxs) {
+					spin_unlock_irqrestore(&wc->lock, flags);
+					dahdi_rbsbits(wc->span.chans[i+3], rxs);
+					spin_lock_irqsave(&wc->lock, flags);
+				}
+			}
+			rxs = (a & 0xc);
+			if (!(wc->span.chans[i+2]->sig & DAHDI_SIG_CLEAR)) {
+				if (wc->span.chans[i+2]->rxsig != rxs) {
+					spin_unlock_irqrestore(&wc->lock, flags);
+					dahdi_rbsbits(wc->span.chans[i+2], rxs);
+					spin_lock_irqsave(&wc->lock, flags);
+				}
+			}
+			rxs = (a >> 2) & 0xc;
+			if (!(wc->span.chans[i+1]->sig & DAHDI_SIG_CLEAR)) {
+				if (wc->span.chans[i+1]->rxsig != rxs) {
+					spin_unlock_irqrestore(&wc->lock, flags);
+					dahdi_rbsbits(wc->span.chans[i+1], rxs);
+					spin_lock_irqsave(&wc->lock, flags);
+				}
+			}
+			rxs = (a >> 4) & 0xc;
+			if (!(wc->span.chans[i]->sig & DAHDI_SIG_CLEAR)) {
+				if (wc->span.chans[i]->rxsig != rxs) {
+					spin_unlock_irqrestore(&wc->lock, flags);
+					dahdi_rbsbits(wc->span.chans[i], rxs);
+					spin_lock_irqsave(&wc->lock, flags);
+				}
+			}
+		}
+	} else {
+		for (i = 0; i < 24; i+=2) {
+			a = __t1_framer_in(wc, 0x70 + (i>>1));
+			/* Get high channel in low bits */
+			rxs = (a & 0xf);
+			if (!(wc->span.chans[i+1]->sig & DAHDI_SIG_CLEAR)) {
+				if (wc->span.chans[i+1]->rxsig != rxs) {
+					spin_unlock_irqrestore(&wc->lock, flags);
+					dahdi_rbsbits(wc->span.chans[i+1], rxs);
+					spin_lock_irqsave(&wc->lock, flags);
+				}
+			}
+			rxs = (a >> 4) & 0xf;
+			if (!(wc->span.chans[i]->sig & DAHDI_SIG_CLEAR)) {
+				if (wc->span.chans[i]->rxsig != rxs) {
+					spin_unlock_irqrestore(&wc->lock, flags);
+					dahdi_rbsbits(wc->span.chans[i], rxs);
+					spin_lock_irqsave(&wc->lock, flags);
+				}
+			}
+		}
+	}
+	spin_unlock_irqrestore(&wc->lock, flags);
+}
+
+static void t4_serial_setup(struct t1 *wc)
+{
+	printk(KERN_INFO "TE110P: Setting up global serial parameters for %s %s\n", 
+	       wc->spantype == TYPE_E1 ? (unchannelized ? "Unchannelized E1" : "E1") : "T1", 
+		   wc->spanflags & FLAG_FALC12 ? "FALC V1.2" : "FALC V2.2");
+	t1_framer_out(wc, 0x85, 0xe0);	/* GPC1: Multiplex mode enabled, FSC is output, active low, RCLK from channel 0 */
+	t1_framer_out(wc, 0x08, 0x05);	/* IPC: Interrupt push/pull active low */
+	if (wc->spanflags & FLAG_FALC12) {
+		t1_framer_out(wc, 0x92, 0x00);	
+		t1_framer_out(wc, 0x93, 0x58);
+		t1_framer_out(wc, 0x94, 0xd2);
+		t1_framer_out(wc, 0x95, 0xc2);
+		t1_framer_out(wc, 0x96, 0x03);
+		t1_framer_out(wc, 0x97, 0x10);
+	} else {
+		/* Global clocks (8.192 Mhz CLK) */
+		t1_framer_out(wc, 0x92, 0x00);	
+		t1_framer_out(wc, 0x93, 0x18);
+		t1_framer_out(wc, 0x94, 0xfb);
+		t1_framer_out(wc, 0x95, 0x0b);
+		t1_framer_out(wc, 0x96, 0x00);
+		t1_framer_out(wc, 0x97, 0x0b);
+		t1_framer_out(wc, 0x98, 0xdb);
+		t1_framer_out(wc, 0x99, 0xdf);
+	}
+	/* Configure interrupts */	
+	t1_framer_out(wc, 0x46, 0x40);	/* GCR: Interrupt on Activation/Deactivation of AIX, LOS */
+
+	/* Configure system interface */
+	t1_framer_out(wc, 0x3e, 0x02);	/* SIC1: 4.096 Mhz clock/bus, double buffer receive / transmit, byte interleaved */
+	t1_framer_out(wc, 0x3f, 0x00); 	/* SIC2: No FFS, no center receive eliastic buffer, phase 0 */
+	t1_framer_out(wc, 0x40, 0x04);	/* SIC3: Edges for capture */
+	t1_framer_out(wc, 0x44, 0x30);	/* CMR1: RCLK is at 8.192 Mhz dejittered */
+	t1_framer_out(wc, 0x45, 0x00);	/* CMR2: We provide sync and clock for tx and rx. */
+	t1_framer_out(wc, 0x22, 0x00);	/* XC0: Normal operation of Sa-bits */
+	t1_framer_out(wc, 0x23, 0x04);	/* XC1: 0 offset */
+	t1_framer_out(wc, 0x24, 0x07);	/* RC0: Just shy of 255 */
+	if (wc->spanflags & FLAG_FALC12)
+		t1_framer_out(wc, 0x25, 0x04);	/* RC1: The rest of RC0 */
+	else
+		t1_framer_out(wc, 0x25, 0x05);	/* RC1: The rest of RC0 */
+	
+	/* Configure ports */
+	t1_framer_out(wc, 0x80, 0x00);	/* PC1: SPYR/SPYX input on RPA/XPA */
+	t1_framer_out(wc, 0x81, 0x22);	/* PC2: RMFB/XSIG output/input on RPB/XPB */
+	t1_framer_out(wc, 0x82, 0x65);	/* PC3: Some unused stuff */
+	t1_framer_out(wc, 0x83, 0x35);	/* PC4: Some more unused stuff */
+	t1_framer_out(wc, 0x84, 0x31);	/* PC5: XMFS active low, SCLKR is input, RCLK is output */
+	t1_framer_out(wc, 0x86, 0x03);	/* PC6: CLK1 is Tx Clock output, CLK2 is 8.192 Mhz from DCO-R */
+	t1_framer_out(wc, 0x3b, 0x00);	/* Clear LCR1 */
+	printk(KERN_INFO "TE110P: Successfully initialized serial bus for card\n");
+}
+
+static void __t1_configure_t1(struct t1 *wc, int lineconfig, int txlevel)
+{
+	unsigned int fmr4, fmr2, fmr1, fmr0, lim2;
+	char *framing, *line;
+	int mytxlevel;
+	if ((txlevel > 7) || (txlevel < 4))
+		mytxlevel = 0;
+	else
+		mytxlevel = txlevel - 4;
+	fmr1 = 0x1c; /* FMR1: Mode 0, T1 mode, CRC on for ESF, 2.048 Mhz system data rate, no XAIS */
+	fmr2 = 0x22; /* FMR2: no payload loopback, auto send yellow alarm */
+	if (loopback)
+		fmr2 |= 0x4;
+
+	if (j1mode)
+		fmr4 = 0x1c;
+	else
+		fmr4 = 0x0c; /* FMR4: Lose sync on 2 out of 5 framing bits, auto resync */
+
+
+	lim2 = 0x21; /* LIM2: 50% peak is a "1", Advanced Loss recovery */
+	lim2 |= (mytxlevel << 6);	/* LIM2: Add line buildout */
+	__t1_framer_out(wc, 0x1d, fmr1);
+	__t1_framer_out(wc, 0x1e, fmr2);
+
+	/* Configure line interface */
+	if (lineconfig & DAHDI_CONFIG_AMI) {
+		line = "AMI";
+		fmr0 = 0xa0;
+	} else {
+		line = "B8ZS";
+		fmr0 = 0xf0;
+	}
+	if (lineconfig & DAHDI_CONFIG_D4) {
+		framing = "D4";
+	} else {
+		framing = "ESF";
+		fmr4 |= 0x2;
+		fmr2 |= 0xc0;
+	}
+	__t1_framer_out(wc, 0x1c, fmr0);
+
+	__t1_framer_out(wc, 0x20, fmr4);
+	__t1_framer_out(wc, 0x21, 0x40);	/* FMR5: Enable RBS mode */
+
+	__t1_framer_out(wc, 0x37, 0xf8);	/* LIM1: Clear data in case of LOS, Set receiver threshold (0.5V), No remote loop, no DRS */
+	__t1_framer_out(wc, 0x36, 0x08);	/* LIM0: Enable auto long haul mode, no local loop (must be after LIM1) */
+
+	__t1_framer_out(wc, 0x02, 0x50);	/* CMDR: Reset the receiver and transmitter line interface */
+	__t1_framer_out(wc, 0x02, 0x00);	/* CMDR: Reset the receiver and transmitter line interface */
+
+	__t1_framer_out(wc, 0x3a, lim2);	/* LIM2: 50% peak amplitude is a "1" */
+	__t1_framer_out(wc, 0x38, 0x0a);	/* PCD: LOS after 176 consecutive "zeros" */
+	__t1_framer_out(wc, 0x39, 0x15);	/* PCR: 22 "ones" clear LOS */
+
+	if (j1mode)
+		__t1_framer_out(wc, 0x24, 0x80); /* J1 overide */
+		
+	/* Generate pulse mask for T1 */
+	switch(mytxlevel) {
+	case 3:
+		__t1_framer_out(wc, 0x26, 0x07);	/* XPM0 */
+		__t1_framer_out(wc, 0x27, 0x01);	/* XPM1 */
+		__t1_framer_out(wc, 0x28, 0x00);	/* XPM2 */
+		break;
+	case 2:
+		__t1_framer_out(wc, 0x26, 0x8c);	/* XPM0 */
+		__t1_framer_out(wc, 0x27, 0x11);	/* XPM1 */
+		__t1_framer_out(wc, 0x28, 0x01);	/* XPM2 */
+		break;
+	case 1:
+		__t1_framer_out(wc, 0x26, 0x8c);	/* XPM0 */
+		__t1_framer_out(wc, 0x27, 0x01);	/* XPM1 */
+		__t1_framer_out(wc, 0x28, 0x00);	/* XPM2 */
+		break;
+	case 0:
+	default:
+		__t1_framer_out(wc, 0x26, 0xd7);	/* XPM0 */
+		__t1_framer_out(wc, 0x27, 0x22);	/* XPM1 */
+		__t1_framer_out(wc, 0x28, 0x01);	/* XPM2 */
+		break;
+	}
+	printk(KERN_INFO "TE110P: Span configured for %s/%s\n", framing, line);
+}
+
+static void __t1_configure_e1(struct t1 *wc, int lineconfig)
+{
+	unsigned int fmr2, fmr1, fmr0;
+	unsigned int cas = 0;
+	char *crc4 = "";
+	char *framing, *line;
+	fmr1 = 0x44; /* FMR1: E1 mode, Automatic force resync, PCM30 mode, 8.192 Mhz backplane, no XAIS */
+	fmr2 = 0x03; /* FMR2: Auto transmit remote alarm, auto loss of multiframe recovery, no payload loopback */
+	if (unchannelized)
+		fmr2 |= 0x30;
+	if (loopback)
+		fmr2 |= 0x4;
+	if (lineconfig & DAHDI_CONFIG_CRC4) {
+		fmr1 |= 0x08;	/* CRC4 transmit */
+		fmr2 |= 0xc0;	/* CRC4 receive */
+		crc4 = "/CRC4";
+	}
+	__t1_framer_out(wc, 0x1d, fmr1);
+	__t1_framer_out(wc, 0x1e, fmr2);
+
+	/* Configure line interface */
+	if (lineconfig & DAHDI_CONFIG_AMI) {
+		line = "AMI";
+		fmr0 = 0xa0;
+	} else {
+		line = "HDB3";
+		fmr0 = 0xf0;
+	}
+	if (lineconfig & DAHDI_CONFIG_CCS) {
+		framing = "CCS";
+	} else {
+		framing = "CAS";
+		cas = 0x40;
+	}
+	__t1_framer_out(wc, 0x1c, fmr0);
+
+	if (unchannelized)
+		__t1_framer_out(wc, 0x1f, 0x40);
+
+	__t1_framer_out(wc, 0x37, 0xf0 /*| 0x6 */ );	/* LIM1: Clear data in case of LOS, Set receiver threshold (0.5V), No remote loop, no DRS */
+	__t1_framer_out(wc, 0x36, 0x08);	/* LIM0: Enable auto long haul mode, no local loop (must be after LIM1) */
+
+	__t1_framer_out(wc, 0x02, 0x50);	/* CMDR: Reset the receiver and transmitter line interface */
+	__t1_framer_out(wc, 0x02, 0x00);	/* CMDR: Reset the receiver and transmitter line interface */
+
+	/* Condition receive line interface for E1 after reset */
+	__t1_framer_out(wc, 0xbb, 0x17);
+	__t1_framer_out(wc, 0xbc, 0x55);
+	__t1_framer_out(wc, 0xbb, 0x97);
+	__t1_framer_out(wc, 0xbb, 0x11);
+	__t1_framer_out(wc, 0xbc, 0xaa);
+	__t1_framer_out(wc, 0xbb, 0x91);
+	__t1_framer_out(wc, 0xbb, 0x12);
+	__t1_framer_out(wc, 0xbc, 0x55);
+	__t1_framer_out(wc, 0xbb, 0x92);
+	__t1_framer_out(wc, 0xbb, 0x0c);
+	__t1_framer_out(wc, 0xbb, 0x00);
+	__t1_framer_out(wc, 0xbb, 0x8c);
+	
+	__t1_framer_out(wc, 0x3a, 0x20);	/* LIM2: 50% peak amplitude is a "1" */
+	__t1_framer_out(wc, 0x38, 0x0a);	/* PCD: LOS after 176 consecutive "zeros" */
+	__t1_framer_out(wc, 0x39, 0x15);	/* PCR: 22 "ones" clear LOS */
+	
+	__t1_framer_out(wc, 0x20, 0x9f);	/* XSW: Spare bits all to 1 */
+	if (unchannelized)
+		__t1_framer_out(wc, 0x21, 0x3c);
+	else
+		__t1_framer_out(wc, 0x21, 0x1c|cas);	/* XSP: E-bit set when async. AXS auto, XSIF to 1 */
+	
+	
+	/* Generate pulse mask for E1 */
+	__t1_framer_out(wc, 0x26, 0x54);	/* XPM0 */
+	__t1_framer_out(wc, 0x27, 0x02);	/* XPM1 */
+	__t1_framer_out(wc, 0x28, 0x00);	/* XPM2 */
+	printk(KERN_INFO "TE110P: Span configured for %s/%s%s\n", framing, line, crc4);
+}
+
+static void t1xxp_framer_start(struct t1 *wc, struct dahdi_span *span)
+{
+	int alreadyrunning = wc->span.flags & DAHDI_FLAG_RUNNING;
+	unsigned long flags;
+
+	spin_lock_irqsave(&wc->lock, flags);
+
+	if (wc->spantype == TYPE_E1) { /* if this is an E1 card */
+		__t1_configure_e1(wc, span->lineconfig);
+	} else { /* is a T1 card */
+		__t1_configure_t1(wc, span->lineconfig, span->txlevel);
+		__t1xxp_set_clear(wc);
+	}
+	
+	if (!alreadyrunning) 
+		wc->span.flags |= DAHDI_FLAG_RUNNING;
+
+	spin_unlock_irqrestore(&wc->lock, flags);
+}
+
+
+static int t1xxp_startup(struct file *file, struct dahdi_span *span)
+{
+	struct t1 *wc = t1_from_span(span);
+
+	int i,alreadyrunning = span->flags & DAHDI_FLAG_RUNNING;
+
+	/* initialize the start value for the entire chunk of last ec buffer */
+	for(i = 0; i < span->channels; i++)
+	{
+		memset(wc->ec_chunk1[i],
+			DAHDI_LIN2X(0,span->chans[i]),DAHDI_CHUNKSIZE);
+		memset(wc->ec_chunk2[i],
+			DAHDI_LIN2X(0,span->chans[i]),DAHDI_CHUNKSIZE);
+	}
+
+	/* Reset framer with proper parameters and start */
+	t1xxp_framer_start(wc, span);
+	printk(KERN_INFO "Calling startup (flags is %lu)\n", span->flags);
+
+	if (!alreadyrunning) {
+		/* Only if we're not already going */
+		t1xxp_enable_interrupts(wc);
+		t1xxp_start_dma(wc);
+		span->flags |= DAHDI_FLAG_RUNNING;
+	}
+	return 0;
+}
+
+static int t1xxp_shutdown(struct dahdi_span *span)
+{
+	struct t1 *wc = t1_from_span(span);
+	unsigned long flags;
+
+	spin_lock_irqsave(&wc->lock, flags);
+	__t1xxp_stop_dma(wc);
+	__t1xxp_disable_interrupts(wc);
+	span->flags &= ~DAHDI_FLAG_RUNNING;
+	spin_unlock_irqrestore(&wc->lock, flags);
+	return 0;
+}
+
+
+static int
+t1xxp_chanconfig(struct file *file, struct dahdi_chan *chan, int sigtype)
+{
+	struct t1 *wc = chan->pvt;
+	unsigned long flags;
+	int alreadyrunning = chan->span->flags & DAHDI_FLAG_RUNNING;
+
+	spin_lock_irqsave(&wc->lock, flags);
+
+	if (alreadyrunning && (wc->spantype != TYPE_E1))
+		__t1xxp_set_clear(wc);
+
+	spin_unlock_irqrestore(&wc->lock, flags);
+	return 0;
+}
+
+static int
+t1xxp_spanconfig(struct file *file, struct dahdi_span *span,
+		 struct dahdi_lineconfig *lc)
+{
+	struct t1 *wc = t1_from_span(span);
+
+	/* Do we want to SYNC on receive or not */
+	wc->sync = (lc->sync) ? 1 : 0;
+	/* If already running, apply changes immediately */
+	if (span->flags & DAHDI_FLAG_RUNNING)
+		return t1xxp_startup(file, span);
+
+	return 0;
+}
+
+static const struct dahdi_span_ops t1xxp_span_ops = {
+	.owner = THIS_MODULE,
+	.startup = t1xxp_startup,
+	.shutdown = t1xxp_shutdown,
+	.rbsbits = t1xxp_rbsbits,
+	.maint = t1xxp_maint,
+	.open = t1xxp_open,
+	.close = t1xxp_close,
+	.spanconfig = t1xxp_spanconfig,
+	.chanconfig = t1xxp_chanconfig,
+	.ioctl = t1xxp_ioctl,
+};
+
+static int t1xxp_software_init(struct t1 *wc)
+{
+	int x;
+	/* Find position */
+	for (x=0;x<WC_MAX_CARDS;x++) {
+		if (!cards[x]) {
+			cards[x] = wc;
+			break;
+		}
+	}
+	if (x >= WC_MAX_CARDS)
+		return -1;
+
+	wc->ddev = dahdi_create_device();
+
+	t4_serial_setup(wc);
+	wc->num = x;
+	sprintf(wc->span.name, "WCT1/%d", wc->num);
+	snprintf(wc->span.desc, sizeof(wc->span.desc) - 1, "%s Card %d", wc->variety, wc->num);
+	wc->ddev->manufacturer = "Digium";
+	wc->ddev->devicetype = wc->variety;
+	wc->ddev->location = kasprintf(GFP_KERNEL, "PCI Bus %02d Slot %02d",
+				       wc->dev->bus->number,
+				       PCI_SLOT(wc->dev->devfn) + 1);
+	if (!wc->ddev->location)
+		return -ENOMEM;
+
+	if (wc->spantype == TYPE_E1) {
+		if (unchannelized)
+			wc->span.channels = 32;
+		else
+			wc->span.channels = 31;
+		wc->span.deflaw = DAHDI_LAW_ALAW;
+		wc->span.spantype = SPANTYPE_DIGITAL_E1;
+		wc->span.linecompat = DAHDI_CONFIG_HDB3 | DAHDI_CONFIG_CCS | DAHDI_CONFIG_CRC4;
+	} else {
+		wc->span.channels = 24;
+		wc->span.deflaw = DAHDI_LAW_MULAW;
+		wc->span.spantype = SPANTYPE_DIGITAL_T1;
+		wc->span.linecompat = DAHDI_CONFIG_AMI | DAHDI_CONFIG_B8ZS | DAHDI_CONFIG_D4 | DAHDI_CONFIG_ESF;
+	}
+	wc->span.chans = wc->chans;
+	wc->span.flags = DAHDI_FLAG_RBS;
+	for (x=0;x<wc->span.channels;x++) {
+		sprintf(wc->chans[x]->name, "WCT1/%d/%d", wc->num, x + 1);
+		wc->chans[x]->sigcap = DAHDI_SIG_EM | DAHDI_SIG_CLEAR | DAHDI_SIG_EM_E1 | 
+				      DAHDI_SIG_FXSLS | DAHDI_SIG_FXSGS | DAHDI_SIG_MTP2 |
+				      DAHDI_SIG_FXSKS | DAHDI_SIG_FXOLS | DAHDI_SIG_DACS_RBS |
+				      DAHDI_SIG_FXOGS | DAHDI_SIG_FXOKS | DAHDI_SIG_CAS | DAHDI_SIG_SF;
+		wc->chans[x]->pvt = wc;
+		wc->chans[x]->chanpos = x + 1;
+	}
+	wc->span.ops = &t1xxp_span_ops;
+	list_add_tail(&wc->span.device_node, &wc->ddev->spans);
+	if (dahdi_register_device(wc->ddev, &wc->dev->dev)) {
+		printk(KERN_NOTICE "Unable to register span with DAHDI\n");
+		return -1;
+	}
+	return 0;
+}
+
+static inline void __handle_leds(struct t1 *wc)
+{
+	int oldreg;
+
+	if (wc->span.alarms & (DAHDI_ALARM_RED | DAHDI_ALARM_BLUE)) {
+		/* Red/Blue alarm */
+		wc->blinktimer++;
+#ifdef FANCY_ALARM
+		if (wc->blinktimer == (altab[wc->alarmpos] >> 1)) {
+			wc->ledtestreg = (wc->ledtestreg | BIT_LED1) & ~BIT_LED0;
+			__control_set_reg(wc, WC_LEDTEST, wc->ledtestreg);
+		}
+		if (wc->blinktimer >= 0xf) {
+			wc->ledtestreg = wc->ledtestreg & ~(BIT_LED0 | BIT_LED1);
+			__control_set_reg(wc, WC_LEDTEST, wc->ledtestreg);
+			wc->blinktimer = -1;
+			wc->alarmpos++;
+			if (wc->alarmpos >= (sizeof(altab) / sizeof(altab[0])))
+				wc->alarmpos = 0;
+		}
+#else
+		if (wc->blinktimer == 160) {
+			wc->ledtestreg = (wc->ledtestreg | BIT_LED1) & ~BIT_LED0;
+			__control_set_reg(wc, WC_LEDTEST, wc->ledtestreg);
+		} else if (wc->blinktimer == 480) {
+			wc->ledtestreg = wc->ledtestreg & ~(BIT_LED0 | BIT_LED1);
+			__control_set_reg(wc, WC_LEDTEST, wc->ledtestreg);
+			wc->blinktimer = 0;
+		}
+#endif
+	} else if (wc->span.alarms & DAHDI_ALARM_YELLOW) {
+		/* Yellow Alarm */
+		if (!(wc->blinktimer % 2)) 
+			wc->ledtestreg = (wc->ledtestreg | BIT_LED1) & ~BIT_LED0;
+		else
+			wc->ledtestreg = (wc->ledtestreg | BIT_LED0) & ~BIT_LED1;
+		__control_set_reg(wc, WC_LEDTEST, wc->ledtestreg);
+	} else {
+		/* No Alarm */
+		oldreg = wc->ledtestreg;
+		if (wc->span.maintstat != DAHDI_MAINT_NONE)
+			wc->ledtestreg |= BIT_TEST;
+		else
+			wc->ledtestreg &= ~BIT_TEST;
+		if (wc->span.flags & DAHDI_FLAG_RUNNING)
+			wc->ledtestreg = (wc->ledtestreg | BIT_LED0) & ~BIT_LED1;
+		else
+			wc->ledtestreg = wc->ledtestreg & ~(BIT_LED0 | BIT_LED1);
+		if (oldreg != wc->ledtestreg)
+			__control_set_reg(wc, WC_LEDTEST, wc->ledtestreg);
+	}
+}
+
+static void t1xxp_transmitprep(struct t1 *wc, int ints)
+{
+	volatile unsigned char *txbuf;
+	int x,y;
+	int pos;
+	if (ints & 0x04 /* 0x01 */) {
+		/* We just finished sending the first buffer, start filling it
+		   now */
+		txbuf = wc->writechunk;
+	} else {
+		/* Just finished sending second buffer, fill it now */
+		txbuf = wc->writechunk + 32 * DAHDI_CHUNKSIZE;
+	}
+	dahdi_transmit(&wc->span);
+	for (x=0;x<wc->offset;x++)
+		txbuf[x] = wc->tempo[x];
+	for (y=0;y<DAHDI_CHUNKSIZE;y++) {
+		for (x=0;x<wc->span.channels;x++) {
+			pos = y * 32 + wc->chanmap[x] + wc->offset;
+			/* Put channel number as outgoing data */
+			if (pos < 32 * DAHDI_CHUNKSIZE)
+				txbuf[pos] = wc->chans[x]->writechunk[y];
+			else
+				wc->tempo[pos - 32 * DAHDI_CHUNKSIZE] = wc->chans[x]->writechunk[y];
+		}
+	}
+}
+
+static void t1xxp_receiveprep(struct t1 *wc, int ints)
+{
+	volatile unsigned char *rxbuf;
+	volatile unsigned int *canary;
+	int x;
+	int y;
+	unsigned int oldcan;
+	if (ints & 0x04) {
+		/* Just received first buffer */
+		rxbuf = wc->readchunk;
+		canary = (unsigned int *)(wc->readchunk + DAHDI_CHUNKSIZE * 64 - 4);
+	} else {
+		rxbuf = wc->readchunk + DAHDI_CHUNKSIZE * 32;
+		canary = (unsigned int *)(wc->readchunk + DAHDI_CHUNKSIZE * 32 - 4);
+	}
+	oldcan = *canary;
+	if (((oldcan & 0xffff0000) >> 16) != CANARY) {
+		/* Check top part */
+		if (debug) printk(KERN_DEBUG "Expecting top %04x, got %04x\n", CANARY, (oldcan & 0xffff0000) >> 16);
+		wc->ddev->irqmisses++;
+	} else if ((oldcan & 0xffff) != ((wc->canary - 1) & 0xffff)) {
+		if (debug) printk(KERN_DEBUG "Expecting bottom %d, got %d\n", wc->canary - 1, oldcan & 0xffff);
+		wc->ddev->irqmisses++;
+	}
+	for (y=0;y<DAHDI_CHUNKSIZE;y++) {
+		for (x=0;x<wc->span.channels;x++) {
+			/* XXX Optimize, remove * and + XXX */
+			/* Must map received channels into appropriate data */
+			wc->chans[x]->readchunk[y] = 
+				rxbuf[32 * y + ((wc->chanmap[x] + WC_OFFSET + wc->offset) & 0x1f)];
+		}
+		if (wc->spantype != TYPE_E1) {
+			for (x=3;x<32;x+=4) {
+				if (rxbuf[32 * y + ((x + WC_OFFSET) & 0x1f)] == 0x7f) {
+					if (wc->offset != (x-3)) {
+						/* Resync */
+						control_set_reg(wc, WC_CLOCK, 0x06 | wc->sync | clockextra);
+						wc->clocktimeout = 100;
+#if 1
+						if (debug) printk(KERN_DEBUG "T1: Lost our place, resyncing\n");
+#endif
+					}
+				}
+			}
+		} else if (!unchannelized) {
+			if (!wc->clocktimeout && !wc->span.alarms) {
+				if ((rxbuf[32 * y + ((3 + WC_OFFSET + wc->offset) & 0x1f)] & 0x7f) != 0x1b) {
+					if (wc->miss) {
+						if (debug) printk(KERN_DEBUG "Double miss (%d, %d)...\n", wc->misslast, rxbuf[32 * y + ((3 + WC_OFFSET + wc->offset) & 0x1f)]);
+						control_set_reg(wc, WC_CLOCK, 0x06 | wc->sync | clockextra);
+						wc->clocktimeout = 100;
+					} else {
+						wc->miss = 1;
+						wc->misslast = rxbuf[32 * y + ((3 + WC_OFFSET + wc->offset) & 0x1f)];
+					}
+				} else {
+					wc->miss = 0;
+				}
+			} else {
+				wc->miss = 0;
+			}
+		} 
+	}
+	/* Store the next canary */
+	canary = (unsigned int *)(rxbuf + DAHDI_CHUNKSIZE * 32 - 4);
+	*canary = (wc->canary++) | (CANARY << 16);
+	for (x=0;x<wc->span.channels;x++) {
+		dahdi_ec_chunk(wc->chans[x], wc->chans[x]->readchunk, wc->ec_chunk2[x]);
+		memcpy(wc->ec_chunk2[x],wc->ec_chunk1[x],DAHDI_CHUNKSIZE);
+		memcpy(wc->ec_chunk1[x],wc->chans[x]->writechunk,DAHDI_CHUNKSIZE);
+	}
+	dahdi_receive(&wc->span);
+}
+
+static void t1_check_alarms(struct t1 *wc)
+{
+	unsigned char c,d;
+	int alarms;
+	int x,j;
+	unsigned long flags;
+
+	if (!(wc->span.flags & DAHDI_FLAG_RUNNING))
+		return;
+
+	spin_lock_irqsave(&wc->lock, flags);
+
+	c = __t1_framer_in(wc, 0x4c);
+	if (wc->spanflags & FLAG_FALC12)
+		d = __t1_framer_in(wc, 0x4f);
+	else
+		d = __t1_framer_in(wc, 0x4d);
+
+	/* Assume no alarms */
+	alarms = 0;
+
+	/* And consider only carrier alarms */
+	wc->span.alarms &= (DAHDI_ALARM_RED | DAHDI_ALARM_BLUE | DAHDI_ALARM_NOTOPEN);
+
+	if (wc->spantype == TYPE_E1) {
+		if (c & 0x04) {
+			/* No multiframe found, force RAI high after 400ms only if
+			   we haven't found a multiframe since last loss
+			   of frame */
+			if (!(wc->spanflags & FLAG_NMF)) {
+				__t1_framer_out(wc, 0x20, 0x9f | 0x20);	/* LIM0: Force RAI High */
+				wc->spanflags |= FLAG_NMF;
+				printk(KERN_DEBUG "NMF workaround on!\n");
+			}
+			__t1_framer_out(wc, 0x1e, 0xc3);	/* Reset to CRC4 mode */
+			__t1_framer_out(wc, 0x1c, 0xf2);	/* Force Resync */
+			__t1_framer_out(wc, 0x1c, 0xf0);	/* Force Resync */
+		} else if (!(c & 0x02)) {
+			if ((wc->spanflags & FLAG_NMF)) {
+				__t1_framer_out(wc, 0x20, 0x9f);	/* LIM0: Clear forced RAI */
+				wc->spanflags &= ~FLAG_NMF;
+				printk(KERN_DEBUG "NMF workaround off!\n");
+			}
+		}
+	} else {
+		/* Detect loopup code if we're not sending one */
+		if ((!wc->span.mainttimer) && (d & 0x08)) {
+			/* Loop-up code detected */
+			if ((wc->loopupcnt++ > 80)  && (wc->span.maintstat != DAHDI_MAINT_REMOTELOOP)) {
+				__t1_framer_out(wc, 0x36, 0x08);	/* LIM0: Disable any local loop */
+				__t1_framer_out(wc, 0x37, 0xf6 );	/* LIM1: Enable remote loop */
+				wc->span.maintstat = DAHDI_MAINT_REMOTELOOP;
+			}
+		} else
+			wc->loopupcnt = 0;
+		/* Same for loopdown code */
+		if ((!wc->span.mainttimer) && (d & 0x10)) {
+			/* Loop-down code detected */
+			if ((wc->loopdowncnt++ > 80)  && (wc->span.maintstat == DAHDI_MAINT_REMOTELOOP)) {
+				__t1_framer_out(wc, 0x36, 0x08);	/* LIM0: Disable any local loop */
+				__t1_framer_out(wc, 0x37, 0xf0 );	/* LIM1: Disable remote loop */
+				wc->span.maintstat = DAHDI_MAINT_NONE;
+			}
+		} else
+			wc->loopdowncnt = 0;
+	}
+
+	if (wc->span.lineconfig & DAHDI_CONFIG_NOTOPEN) {
+		for (x=0,j=0;x < wc->span.channels;x++)
+			if ((wc->span.chans[x]->flags & DAHDI_FLAG_OPEN) ||
+			    dahdi_have_netdev(wc->span.chans[x]))
+				j++;
+		if (!j)
+			alarms |= DAHDI_ALARM_NOTOPEN;
+	}
+
+	if (c & 0xa0) {
+		if (wc->alarmcount >= alarmdebounce) {
+			if (!unchannelized)
+				alarms |= DAHDI_ALARM_RED;
+		} else
+			wc->alarmcount++;
+	} else
+		wc->alarmcount = 0;
+	if (c & 0x4)
+		alarms |= DAHDI_ALARM_BLUE;
+
+	if (((!wc->span.alarms) && alarms) || 
+	    (wc->span.alarms && (!alarms))) 
+		wc->checktiming = 1;
+
+	/* Keep track of recovering */
+	if ((!alarms) && wc->span.alarms) 
+		wc->alarmtimer = DAHDI_ALARMSETTLE_TIME;
+	if (wc->alarmtimer)
+		alarms |= DAHDI_ALARM_RECOVER;
+
+	/* If receiving alarms, go into Yellow alarm state */
+	if (alarms && !(wc->spanflags & FLAG_SENDINGYELLOW)) {
+		unsigned char fmr4;
+#if 1
+		printk(KERN_INFO "wcte1xxp: Setting yellow alarm\n");
+#endif
+		/* We manually do yellow alarm to handle RECOVER and NOTOPEN, otherwise it's auto anyway */
+		fmr4 = __t1_framer_in(wc, 0x20);
+		__t1_framer_out(wc, 0x20, fmr4 | 0x20);
+		wc->spanflags |= FLAG_SENDINGYELLOW;
+	} else if ((!alarms) && (wc->spanflags & FLAG_SENDINGYELLOW)) {
+		unsigned char fmr4;
+#if 1
+		printk(KERN_INFO "wcte1xxp: Clearing yellow alarm\n");
+#endif
+		/* We manually do yellow alarm to handle RECOVER  */
+		fmr4 = __t1_framer_in(wc, 0x20);
+		__t1_framer_out(wc, 0x20, fmr4 & ~0x20);
+		wc->spanflags &= ~FLAG_SENDINGYELLOW;
+	}
+
+	/* Re-check the timing source when we enter/leave alarm, not withstanding
+	   yellow alarm */
+	if ((c & 0x10) && !unchannelized)
+		alarms |= DAHDI_ALARM_YELLOW;
+	if (wc->span.mainttimer || wc->span.maintstat) 
+		alarms |= DAHDI_ALARM_LOOPBACK;
+	wc->span.alarms = alarms;
+	spin_unlock_irqrestore(&wc->lock, flags);
+	dahdi_alarm_notify(&wc->span);
+}
+
+
+static void t1_do_counters(struct t1 *wc)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&wc->lock, flags);
+	if (wc->alarmtimer) {
+		if (!--wc->alarmtimer) {
+			wc->span.alarms &= ~(DAHDI_ALARM_RECOVER);
+			spin_unlock_irqrestore(&wc->lock, flags);
+			dahdi_alarm_notify(&wc->span);
+			spin_lock_irqsave(&wc->lock, flags);
+		}
+	}
+	spin_unlock_irqrestore(&wc->lock, flags);
+}
+
+DAHDI_IRQ_HANDLER(t1xxp_interrupt)
+{
+	struct t1 *wc = dev_id;
+	unsigned char ints;
+	unsigned long flags;
+	int x;
+
+	ints = inb(wc->ioaddr + WC_INTSTAT);
+	if (!ints)
+		return IRQ_NONE;
+
+	local_irq_save(flags);
+
+	outb(ints, wc->ioaddr + WC_INTSTAT);
+
+	if (!wc->intcount) {
+		if (debug) printk(KERN_DEBUG "Got interrupt: 0x%04x\n", ints);
+	}
+	wc->intcount++;
+
+	if (wc->clocktimeout && !--wc->clocktimeout) 
+		control_set_reg(wc, WC_CLOCK, 0x04 | wc->sync | clockextra);
+
+	if (ints & 0x0f) {
+		t1xxp_receiveprep(wc, ints);
+		t1xxp_transmitprep(wc, ints);
+	}
+	spin_lock(&wc->lock);
+
+#if 1
+	__handle_leds(wc);
+#endif
+
+	spin_unlock(&wc->lock);
+
+	/* Count down timers */
+	t1_do_counters(wc);
+
+	/* Do some things that we don't have to do very often */
+	x = wc->intcount & 15 /* 63 */;
+	switch(x) {
+	case 0:
+	case 1:
+		break;
+	case 2:
+		t1_check_sigbits(wc);
+		break;
+	case 4:
+		/* Check alarms 1/4 as frequently */
+		if (!(wc->intcount & 0x30))
+			t1_check_alarms(wc);
+		break;
+	}
+	
+	if (ints & 0x10) 
+		printk(KERN_NOTICE "PCI Master abort\n");
+
+	if (ints & 0x20)
+		printk(KERN_NOTICE "PCI Target abort\n");
+
+	local_irq_restore(flags);
+	return IRQ_RETVAL(1);
+}
+
+static int t1xxp_hardware_init(struct t1 *wc)
+{
+	unsigned int falcver;
+	unsigned int x;
+	/* Hardware PCI stuff */
+	/* Reset chip and registers */
+	outb(DELAY | 0x0e, wc->ioaddr + WC_CNTL);
+	/* Set all outputs to 0 */
+	outb(0x00, wc->ioaddr + WC_AUXD);
+	/* Set all to outputs except AUX1 (TDO). */
+	outb(0xfd, wc->ioaddr + WC_AUXC);
+	/* Configure the serial port: double clock, 20ns width, no inversion,
+	   MSB first */
+	outb(0xc8, wc->ioaddr + WC_SERC);
+
+	/* Internally delay FSC by one */
+	outb(0x01, wc->ioaddr + WC_FSCDELAY);
+
+	/* Back to normal, with automatic DMA wrap around */
+	outb(DELAY | 0x01, wc->ioaddr + WC_CNTL);
+	
+	/* Make sure serial port and DMA are out of reset */
+	outb(inb(wc->ioaddr + WC_CNTL) & 0xf9, WC_CNTL);
+	
+	/* Setup DMA Addresses */
+	/* Start at writedma */
+	outl(wc->writedma,                    wc->ioaddr + WC_DMAWS);		/* Write start */
+	/* First frame */
+	outl(wc->writedma + DAHDI_CHUNKSIZE * 32 - 4, wc->ioaddr + WC_DMAWI);		/* Middle (interrupt) */
+	/* Second frame */
+	outl(wc->writedma + DAHDI_CHUNKSIZE * 32 * 2 - 4, wc->ioaddr + WC_DMAWE);			/* End */
+	
+	outl(wc->readdma,                    	 wc->ioaddr + WC_DMARS);	/* Read start */
+	/* First frame */
+	outl(wc->readdma + DAHDI_CHUNKSIZE * 32 - 4, 	 wc->ioaddr + WC_DMARI);	/* Middle (interrupt) */
+	/* Second frame */
+	outl(wc->readdma + DAHDI_CHUNKSIZE * 32 * 2 - 4, wc->ioaddr + WC_DMARE);	/* End */
+	
+	if (debug) printk(KERN_DEBUG "Setting up DMA (write/read = %08lx/%08lx)\n", (long)wc->writedma, (long)wc->readdma);
+
+	if (t1e1override > -1) {
+		if (t1e1override)
+			wc->spantype = TYPE_E1;
+		else
+			wc->spantype = TYPE_T1;
+	} else {
+		if (control_get_reg(wc, WC_CLOCK) & 0x20)
+			wc->spantype = TYPE_T1;
+		else
+			wc->spantype = TYPE_E1;
+	}
+
+	/* Check out the controller */
+	if (debug) printk(KERN_DEBUG "Controller version: %02x\n", control_get_reg(wc, WC_VERSION));
+
+
+	control_set_reg(wc, WC_LEDTEST, 0x00);
+
+	if (wc->spantype == TYPE_E1) {
+		if (unchannelized)
+			wc->chanmap = chanmap_e1uc;
+		else
+			wc->chanmap = chanmap_e1;
+	} else
+		wc->chanmap = chanmap_t1;
+	/* Setup clock appropriately */
+	control_set_reg(wc, WC_CLOCK, 0x06 | wc->sync | clockextra);
+	wc->clocktimeout = 100;
+
+	/* Perform register test on FALC */	
+	for (x=0;x<256;x++) {
+		t1_framer_out(wc, 0x14, x);
+		if ((falcver = t1_framer_in(wc, 0x14)) != x) 
+			printk(KERN_DEBUG "Wrote '%x' but read '%x'\n", x, falcver);
+	}
+	
+	t1_framer_out(wc, 0x4a, 0xaa);
+	falcver = t1_framer_in(wc ,0x4a);
+	printk(KERN_INFO "FALC version: %08x\n", falcver);
+	if (!falcver)
+		wc->spanflags |= FLAG_FALC12;
+	
+
+	start_alarm(wc);
+	return 0;
+
+}
+
+static int __devinit t1xxp_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct t1 *wc;
+	unsigned int *canary;
+	unsigned int x;
+	
+	if (pci_enable_device(pdev)) {
+		return -EIO;
+	}
+	if (!(wc = kmalloc(sizeof(*wc), GFP_KERNEL))) {
+		return -ENOMEM;
+	}
+
+	memset(wc, 0x0, sizeof(*wc));
+	spin_lock_init(&wc->lock);
+	wc->ioaddr = pci_resource_start(pdev, 0);
+	wc->dev = pdev;
+	wc->offset = 28;	/* And you thought 42 was the answer */
+	
+	wc->writechunk = 
+		/* 32 channels, Double-buffer, Read/Write */
+		(unsigned char *)pci_alloc_consistent(pdev, DAHDI_MAX_CHUNKSIZE * 32 * 2 * 2, &wc->writedma);
+	if (!wc->writechunk) {
+				printk(KERN_NOTICE "wcte11xp: Unable to allocate DMA-able memory\n");
+				return -ENOMEM;
+	}
+	
+	/* Read is after the whole write piece (in bytes) */
+	wc->readchunk = wc->writechunk + DAHDI_CHUNKSIZE * 32 * 2;
+	
+	/* Same thing...  */
+	wc->readdma = wc->writedma + DAHDI_CHUNKSIZE * 32 * 2;
+	
+	/* Initialize Write/Buffers to all blank data */
+	memset((void *)wc->writechunk,0x00,DAHDI_MAX_CHUNKSIZE * 2 * 2 * 32);
+	/* Initialize canary */
+	canary = (unsigned int *)(wc->readchunk + DAHDI_CHUNKSIZE * 64 - 4);
+	*canary = (CANARY << 16) | (0xffff);
+	
+	/* Enable bus mastering */
+	pci_set_master(pdev);
+	
+	/* Keep track of which device we are */
+	pci_set_drvdata(pdev, wc);
+	
+	if (request_irq(pdev->irq, t1xxp_interrupt,
+			IRQF_SHARED, "wcte11xp", wc)) {
+		printk(KERN_NOTICE "wcte11xp: Unable to request IRQ %d\n", pdev->irq);
+		kfree(wc);
+		return -EIO;
+	}
+	/* Initialize hardware */
+	t1xxp_hardware_init(wc);
+	
+	/* We now know which version of card we have */
+	wc->variety = "Digium Wildcard TE110P T1/E1";
+	
+	for (x = 0; x < (wc->spantype == TYPE_E1 ? 31 : 24); x++) {
+		if (!(wc->chans[x] = kmalloc(sizeof(*wc->chans[x]), GFP_KERNEL))) {
+			while (x) {
+				kfree(wc->chans[--x]);
+			}
+
+			kfree(wc);
+			return -ENOMEM;
+		}
+		memset(wc->chans[x], 0, sizeof(*wc->chans[x]));
+	}
+
+	/* Misc. software stuff */
+	t1xxp_software_init(wc);
+	
+	printk(KERN_INFO "Found a Wildcard: %s\n", wc->variety);
+
+	return 0;
+}
+
+static void t1xxp_stop_stuff(struct t1 *wc)
+{
+	/* Kill clock */
+	control_set_reg(wc, WC_CLOCK, 0);
+
+	/* Turn off LED's */
+	control_set_reg(wc, WC_LEDTEST, 0);
+
+}
+
+static void __devexit t1xxp_remove_one(struct pci_dev *pdev)
+{
+	struct t1 *wc = pci_get_drvdata(pdev);
+	if (wc) {
+
+		/* Stop any DMA */
+		__t1xxp_stop_dma(wc);
+
+		/* In case hardware is still there */
+		__t1xxp_disable_interrupts(wc);
+		
+		t1xxp_stop_stuff(wc);
+
+		/* Immediately free resources */
+		pci_free_consistent(pdev, DAHDI_MAX_CHUNKSIZE * 2 * 2 * 32 * 4, (void *)wc->writechunk, wc->writedma);
+		free_irq(pdev->irq, wc);
+
+		/* Reset PCI chip and registers */
+		outb(DELAY | 0x0e, wc->ioaddr + WC_CNTL);
+
+		/* Release span, possibly delayed */
+		if (!wc->usecount)
+			t1xxp_release(wc);
+		else
+			wc->dead = 1;
+	}
+}
+
+static DEFINE_PCI_DEVICE_TABLE(t1xxp_pci_tbl) = {
+	{ 0xe159, 0x0001, 0x71fe, PCI_ANY_ID, 0, 0, (unsigned long) "Digium Wildcard TE110P T1/E1 Board" },
+	{ 0xe159, 0x0001, 0x79fe, PCI_ANY_ID, 0, 0, (unsigned long) "Digium Wildcard TE110P T1/E1 Board" },
+	{ 0xe159, 0x0001, 0x795e, PCI_ANY_ID, 0, 0, (unsigned long) "Digium Wildcard TE110P T1/E1 Board" },
+	{ 0xe159, 0x0001, 0x79de, PCI_ANY_ID, 0, 0, (unsigned long) "Digium Wildcard TE110P T1/E1 Board" },
+	{ 0xe159, 0x0001, 0x797e, PCI_ANY_ID, 0, 0, (unsigned long) "Digium Wildcard TE110P T1/E1 Board" },
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(pci,t1xxp_pci_tbl);
+
+static struct pci_driver t1xxp_driver = {
+	.name =	"wcte11xp",
+	.probe = t1xxp_init_one,
+	.remove = __devexit_p(t1xxp_remove_one),
+	.suspend = NULL,
+	.resume = NULL,
+	.id_table = t1xxp_pci_tbl,
+};
+
+static int __init t1xxp_init(void)
+{
+	int res;
+	res = dahdi_pci_module(&t1xxp_driver);
+	if (res)
+		return -ENODEV;
+	return 0;
+}
+
+static void __exit t1xxp_cleanup(void)
+{
+	pci_unregister_driver(&t1xxp_driver);
+}
+
+module_param(alarmdebounce, int, 0600);
+module_param(loopback, int, 0600);
+module_param(t1e1override, int, 0600);
+module_param(unchannelized, int, 0600);
+module_param(clockextra, int, 0600);
+module_param(debug, int, 0600);
+module_param(j1mode, int, 0600);
+
+MODULE_DESCRIPTION("Wildcard TE110P Driver");
+MODULE_AUTHOR("Mark Spencer <markster@digium.com>");
+MODULE_LICENSE("GPL v2");
+
+module_init(t1xxp_init);
+module_exit(t1xxp_cleanup);
-- 
2.29.2

Places

File 0007-Revert-Remove-support-for-driver-wcte11xp.patch of Package dahdi-linux (Revision 6d25e4e40c68fcb99607fa21e20398f8)

Places