File dahdi-tools.changes of Package dahdi-tools

Overview Repositories Revisions Requests Users Attributes Meta

File dahdi-tools.changes of Package dahdi-tools (Revision b15a7a7e281ad54789a69340233b01b3)

Currently displaying revision b15a7a7e281ad54789a69340233b01b3 , Show latest

-------------------------------------------------------------------
Wed Dec 16 21:26:18 UTC 2020 - Martin Hauke <mardnh@gmx.de>

- Add patch:
  * dahdi-tools-fix-lto.patch

-------------------------------------------------------------------
Sun Sep  6 12:35:34 UTC 2020 - Jan Engelhardt <jengelh@inai.de>

- Trim old specfile constructs.

-------------------------------------------------------------------
Thu Feb  6 09:44:25 UTC 2020 - Hans-Peter Jansen <hpj@urpla.net>

- Update to new upstream release 3.1.0
  * No changelog was provided

-------------------------------------------------------------------
Fri Jul 26 14:12:59 UTC 2019 - Hans-Peter Jansen <hpj@urpla.net>

- Apply dahdi-tools-fix-members.diff 
  programming error, fails to compile with lto enabled otherwise
- relocate bash-completion stub
- minor clean ups
- enable lto again

-------------------------------------------------------------------
Thu Jul 25 15:00:45 UTC 2019 - Hans-Peter Jansen <hpj@urpla.net>

- Disable lto in order to compile with Tumbleweed

-------------------------------------------------------------------
Tue Jan  8 02:47:57 UTC 2019 - Jan Engelhardt <jengelh@inai.de>

- Update to new upstream release 3.0.0
  * No changelog was provided

-------------------------------------------------------------------
Sat May  5 14:39:42 UTC 2018 - hpj@urpla.net

- use new _fillupdir macro

-------------------------------------------------------------------
Mon Mar 21 05:07:43 UTC 2016 - jamesp@vicidial.com

- Update to new upstream release 2.11.1
    * No changelog was found or provided
- Create patch for XPP to generate man pages properly
- Set PERLLIB to vendor perl for configure
- Run install-config to generate default configs
- Create empty /etc/dahdi/modules file
- Change dahdi black file to dahdi-blacklist.conf
- Install default system.conf for DAHDI

-------------------------------------------------------------------
Thu Aug 13 15:29:36 UTC 2015 - jengelh@inai.de

- Update to new upstream release 2.10.2

-------------------------------------------------------------------
Tue Mar 17 20:02:17 UTC 2015 - jengelh@inai.de

- Update to new upstream release 2.10.1

-------------------------------------------------------------------
Mon Oct 13 03:36:54 UTC 2014 - jengelh@inai.de

- Update to new upstream release 2.10.0.1
* No changelog was provided
* New option no-use-clear-halt

-------------------------------------------------------------------
Sat Aug 23 07:56:19 UTC 2014 - marcelloceschia@users.sourceforge.net

- Update to new upstream release 2.10.0 to match DAHDI update
* No changelog was provided

-------------------------------------------------------------------
Thu Jun 19 17:07:26 UTC 2014 - jamesp@vicidial.com

- Update to new upstream release 2.9.1 to match DAHDI update
* No changelog was provided

-------------------------------------------------------------------
Thu Apr 10 03:44:42 UTC 2014 - jamesp@vicidial.com

- Update to new upstream release 2.9.0.1
* No changelog was provided

-------------------------------------------------------------------
Tue Dec 24 10:20:43 UTC 2013 - jengelh@inai.de

- Update to new upstream release 2.8.0
* No changelog was provided

-------------------------------------------------------------------
Thu Aug 15 13:42:09 UTC 2013 - jengelh@inai.de

- Update to new upstream release 2.7.0
* wcte13xp and the mISDN card modules hfcmulti, hfcpci and netjet
  have been added to the blacklist sample

-------------------------------------------------------------------
Thu Feb 28 19:46:49 UTC 2013 - jamesp@vicidial.com

- Fixed a circular build dependency (dahdi-tools -> libpri-devel
  (libpri) -> libtonezone-devel (dahdi-tools)) by removing
  unnecessary libpri BuildRequire from dahdi-tools.

-------------------------------------------------------------------
Mon Aug 27 005:36:34 UTC 2012 - jamesp@vicidial.com

- Add provides dahdi-tools-devel for older package compatibility

-------------------------------------------------------------------
Mon Jun 25 01:00:23 UTC 2012 - jengelh@inai.de

- Update to new upstream release 2.6.1
* astribank: wait for udev to settle
* update the product ID database with new USB devices

-------------------------------------------------------------------
Mon Mar 12 22:05:34 UTC 2012 - jengelh@medozas.de

- Remove bogus patch (dahdi-tools-2.3.0-Makefile.patch) (bnc#750764)
- Obsolete dahdi-tools-soname.diff and use original SONAME

-------------------------------------------------------------------
Thu Dec 15 23:48:37 UTC 2011 - jengelh@medozas.de

- Update to new upstream release 2.6.0-rc1, changelog is at
  http://downloads.asterisk.org/pub/telephony/dahdi-tools/ChangeLog-2.6.0-rc1

-------------------------------------------------------------------
Mon Oct 10 19:30:47 UTC 2011 - chris@computersalat.de

- fix deps for SLE_10
* BuildReq dahdi-linux-devel

-------------------------------------------------------------------
Mon Oct  3 20:57:23 UTC 2011 - jengelh@medozas.de

- Update to new upstream release 2.5.0.1, see
  http://downloads.asterisk.org/pub/telephony/dahdi-tools/ChangeLog-2.5.0.1
- Remove redundant sections; clear up BuildRequires
- Add patch to fix wrong SO name
- Give libtelezone its own devel package

-------------------------------------------------------------------
Tue Mar  8 14:41:18 UTC 2011 - chris@computersalat.de

- update to 2.4.1
  * /, xpp/perl_modules/Dahdi/Chans.pm,
    xpp/perl_modules/Dahdi/Config/Gen/System.pm: dahdi-perl: more
    left-over $span->xpd Replace the remaining $span->xpd with
    xpd_of_span(). Following up on r9648. Merged revisions 9731 via
    svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk
  * xpp/perl_modules/Dahdi/Hardware/USB.pm, /: dahdi-perl: fix xpp
    driver in dahdi_hardware Don't require 'dahdi_hardware -v' to
    show the driver for a USB device. Only works when the usbfs is
    not used (when /proc/bus/usb is not mounted). Signed-off-by:
    Tzafrir Cohen <tzafrir.cohen@xorcom.com> Merged revisions 9699
    via svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk
  * /, xpp/perl_modules/Dahdi/Span.pm: dahdi-perl: left-over
    $span->xpd Replace one remaining $span->{XPD} with xpd_of_span().
    Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> Merged
    revisions 9648 via svnmerge from
    http://svn.digium.com/svn/dahdi/tools/trunk
  * /, xpp/perl_modules/Dahdi/Config/Gen/System.pm: dahdi_genconf:
    Don't generate configurations that use channel 16 on E1 CAS
    Attempting to use channel 16 on E1 CAS is disallowed since that
    channel is reserved for RBS signaling. Configurations should not
    be generated that attempt to use it. Closes DAHDI-763. Patch by
    dmartinez. Merged revisions 9485 via svnmerge from
    http://svn.digium.com/svn/dahdi/tools/trunk
  * /, xpp/xpp_fxloader: xpp_fxloader: Don't try to load FPGA
    firmware twice When called from udev to load the FPGA firmware,
    make sure that this is not the event generated for the first
    end-point of the existing two, as we need to talk with the second
    one. This is probably better done in the udev rules, but will be
    slightly more complicated to apply only to the FPGA loading and
    not to USB firmware loading. Merged revisions 9482 via svnmerge
    from http://svn.digium.com/svn/dahdi/tools/trunk
  * dahdi_scan.c, /: dahdi_scan: Show CAS framing on the framing
    line. Also, always append "/CRC4" on any span where that was
    specified as an option. Signed-off-by: Shaun Ruffell
    <sruffell@digium.com> Acked-by: Kinsey Moore <kmoore@digium.com>
    Merged revisions 9473 via svnmerge from
    http://svn.digium.com/svn/dahdi/tools/trunk
  * dahdi_scan.c, /: Fixed up the loss of crc4-multiframe alignment
    logic Loss of crc4-multiframe alignment on an E1 link is not a
    condition which brings the span down. The span will continue to
    run as long as it can maintain double frame alignment. Because of
    this, we cannot place the LMFA alarm in the usual spaninfo.alarms
    member, due to userspace programs using this as a catch-all for a
    span being up or down. We can detect the alarm by watching the
    frame error counter (fecount). If it continuously increments, the
    span is configured for crc4, and the span remains OK (alarms =
    0), then we are in loss of crc4-multiframe state. In order to
    test this alarm, you'll need to synthesize a loss of crc4
    alignment on the span. You can usually do this by configuring the
    local span to use crc4 and the remote end to not use crc4. I used
    the Fireberd 6000 in my lab to do this. dahdi-743 & dahdi-420
    Acked-by: Shaun Ruffell <sruffell@digium.com> Merged revisions
    9458 via svnmerge from
    http://svn.digium.com/svn/dahdi/tools/trunk
  * xpp/perl_modules/Dahdi/Hardware/PCI.pm, /: Dahdi::Hardware:
    Support beroNet BN4S0e PCI Express card Add extra PCI IDs to
    support "beroNet BN4S0e PCI Express 4x S0 Karte". Origin:
    http://bugs.debian.org/600839 Merged revisions 9452 via svnmerge
    from http://svn.digium.com/svn/dahdi/tools/trunk
  * autoconfig.h.in, xpp/astribank_is_starting.c, /, configure,
    configure.ac: astribank_is_starting: use semop if no semtimedop
    astribank_is_starting should use a timeout for the semaphore, but
    if the GNU-specific semtimedop() is not available, we'll just
    fall back to using semop with no time out. Not as good, but
    better than nothing. (closes issue #16783) Reported by: abelbeck
    Merged revisions 9426 via svnmerge from
    http://svn.digium.com/svn/dahdi/tools/trunk
  * /, zonedata.c: tonezone: Add Macao,China to tone zone data Adding
    Macao tone zone data according to
    http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf (closes
    issue #17744) Reported by: alfredtang Patches: zonedata.patch
    uploaded by alfredtang (license 1094) Merged revisions 9313 via
    svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk
- remove deprecated files from pkg
  o /etc/hotplug/usb/xpp_fxloader
  o /etc/hotplug/usb/xpp_fxloader.usermap
- remove Author from description

-------------------------------------------------------------------
Sat Nov  6 12:26:01 UTC 2010 - chris@computersalat.de

- fix init
  o fix status

-------------------------------------------------------------------
Fri Nov  5 16:09:55 UTC 2010 - toganm@opensuse.org

- spelling correction in the dahdi.init description
- add status option which shows if the modules are loaded or not

-------------------------------------------------------------------
Thu Nov  4 13:08:08 UTC 2010 - chris@computersalat.de

- update to 2.4.0
  o lot of changes please see ChangeLog file
- rpmlint: shlib-fixed-dependency
  o remove explicit Requires from libtonezone2_0

-------------------------------------------------------------------
Wed Apr 21 12:02:55 UTC 2010 - chris@computersalat.de

- update to 2.3.0
  * dahdi-tools version 2.3.0 released.
  * xpp/perl_modules/Dahdi/Hardware/USB.pm: Also detect USB devices
    connected on a hub.
  * xpp/perl_modules/Dahdi/Span.pm: Also detect type for Sangoma
    E1/T1 cards.
  * Makefile: dahdi_maint: install dahdi_maint on 'make install'
  * dahdi_maint.c: Add a space between words and correct an error
    message.
  * xpp/perl_modules/Dahdi/Hardware/PCI.pm: wcb4xxp - add Swyx 4xS0
    SX2 QuadBri PCI IDs to dahdi-perl (issue #16493) Reported by:
    nic_bellamy
  * xpp/perl_modules/Dahdi/Hardware/PCI.pm: Some more wcb4xxp PCI IDs
    for Junghanns cards (issue #15446) (issue #16447) Reported by:
    lpistone Tested by: okrief
- add Makefile patch
  o rename modprobe files
    dahdi.conf > dahdi
    dahdi.blacklist.conf > dahdi.blacklist

-------------------------------------------------------------------
Sat Mar 27 16:56:41 UTC 2010 - chris@computersalat.de

- update to 2.2.1.1
  * xpp/perl_modules/Dahdi/Hardware/PCI.pm: Added IDs for gen5 firmware

-------------------------------------------------------------------
Fri Jan 22 20:37:17 UTC 2010 - chris@computersalat.de

- update to 2.2.1
  * /, xpp/README.Astribank: Another round of updates to
    README.Astribank. zap->dahdi and others Merged revisions 7754 via
    svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk
  * xpp/perl_modules/Dahdi/Hardware/USB.pm, /: dahdi-perl: only get
    'serial' and 'devnum' attributes from Astribanks We can tell if a
    device is an Astribank by the vendorId and productId attribute.
    Get other attributed only after we give up on other devices.
    (closes issue #16552) Merged revisions 7558 via svnmerge from
    https://origsvn.digium.com/svn/dahdi/tools/trunk
  * /, xpp/xpp_fxloader: xpp_fxloader: adapt to newer kernels This
    commit prepares xpp_fxloader to get hotplug envirnment from newer
    kernel versions: * DEVICE will eventually be replaced with
    DEVNAME. Accept both (and look at DEVNAME first). * If we get
    DEVICE, we'll probably get an invalid path based at /proc/bus/usb
    . Fix it to use /dev/bus/usb . * While we're at it, allow using
    PRODUCT from the envirnment instead of from the command-line.
    This should allow fixing udev rules but will also work with
    existing rules in DAHDI-linux from trunk (for systems where they
    are valid). Merged revisions 7752 via svnmerge from
    http://svn.digium.com/svn/dahdi/tools/trunk
  * /, xpp/waitfor_xpds, xpp/twinstar_hook, xpp/xpp_fxloader: xpp:
    Comment-only changes: copyright, keywords Merged revisions 7463
    via svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk
  * /, xpp/twinstar: Add perldoc for twinstar. This also avoids a
    bogus, empty twinstar.8 man page. Merged revisions 7219,7263 via
    svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk
    ........ r7219 | tzafrir | 2009-09-27 13:49:40 +0200 (Sun, 27 Sep
    2009) | 5 lines xpp: install twinstar by default; Add a man page
    Add a man page to twinstar (as perl POD) and get it installed by
    default. ........ r7263 | tzafrir | 2009-09-29 22:45:50 +0200
    (Tue, 29 Sep 2009) | 2 lines xpp: fix a typo in documentation
    ........
  * README, /: Fix README for asciidoc 8.5.2 Tweak title a bit to
    avoid asciidoc consider it a header for a syntax block. Merged
    revisions 7792 via svnmerge from
    http://svn.digium.com/svn/dahdi/tools/trunk
- added ChangeLog, LICENSE*, README

-------------------------------------------------------------------
Thu Jan 14 13:12:42 UTC 2010 - chris@computersalat.de

- include actual tarball version in package version
- cleanup source
  o updated tarball to its upstream version
    * it is an rc release

-------------------------------------------------------------------
Sat Jan  9 20:10:49 UTC 2010 - chris@computersalat.de

- added rpmlintrc file
- fixed build-/deps

-------------------------------------------------------------------
Mon Jan  4 01:41:54 UTC 2010 - chris@computersalat.de

- cleanup spec
  o added header
  o sorted TAGS
  o fixed deps
  o removed white spaces
  o lot of rpmlint stuff
  o moved changelog to changes file
- cleanup source
  o removed -init tarball
  o added init/sysconfig as extra Source
  o added .changes file
- libs to libs sub pkg

-------------------------------------------------------------------
Mon Dec 21 02:18:20 CET 2009 - vittorio@vitsoft.bz

- dahdi-tools 2.2.1

-------------------------------------------------------------------
Wed Jul 01 05:14:56 CET 2009 - vittorio@vitsoft.bz

- dahdi-tools 2.2.0

-------------------------------------------------------------------
Wed Dec 10 18:50:31 CET 2008 - vittorio@vitsoft.bz

- dahdi-tools 2.1.0

-------------------------------------------------------------------
Sat Oct 04 19:27:40 CET 2008 - vittorio@vitsoft.bz

- dahdi-tools 2.0.0

-------------------------------------------------------------------
Mon Sep 08 06:33:30 CET 2008 - vittorio@vitsoft.bz

- dahdi-tools 2.0.0 rc2

Places

File dahdi-tools.changes of Package dahdi-tools (Revision b15a7a7e281ad54789a69340233b01b3)

Places