Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
network:telephony
hylafax
hylafax-6.0.4-isdn.patch
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File hylafax-6.0.4-isdn.patch of Package hylafax
Index: README.I4L ================================================================================ --- README.I4L +++ README.I4L @@ -0,0 +1,10 @@ + +This version contains sample config files for I4L Class1 and Class2 +modems. +Note: You have to change ModemResetCmd to reflect your local setup. + +It also contains some extentions to dispatch faxes depending on the MSN +or on the extention of local exchanges via email. +To use this feature you simply add "<email> <number>" pairs to etc/users +and use the "ATS23=3&L<numberlist>" I4L command in ModemResetCmd to listen +on these numbes an transmit the number. --- config/Makefile.in +++ config/Makefile.in @@ -70,6 +70,7 @@ iaxmodem \ intel-400e \ ip568x \ + linux-isdn-1 \ linux-isdn-2 \ lucent \ lucent-isa \ --- config/linux-isdn-1 +++ config/linux-isdn-1 @@ -0,0 +1,38 @@ +# +# prototype config file for Linux ISDN (/dev/ttyIX) Class1 modems +# Siemens ISURF or +# Sedlbauer speedfax+ ISDN cards +# +# +# CONFIG:CLASS1:"isdn4linux"-*-* +# +# +# BEGIN-SERVER +# END-SERVER +# +# Modem-related stuff: should reflect modem command interface +# and hardware connection/cabling (e.g. flow control). +# +ModemType: Class1 # use this to supply a hint +ModemNoFlowCmd: AT&K0 +ModemSoftFlowCmd: AT&K4 +ModemHardFlowCmd: AT&K3 +# +# Put your MSN number in here... +# &E outgoing MSN +# &L incomming (listen) MSN, may be a list or wildcards +# +ModemResetCmds: AT&E99&L99 # stuff to do when modem is reset + +# +Class1Cmd: AT+FCLASS=1 # command to enter class 1 +Class1PPMWaitCmd: AT+FTS=7 # command to stop and wait before PPM +Class1TCFWaitCmd: AT+FTS=7 # command to stop and wait before TCF +Class1EOPWaitCmd: AT+FTS=9 # command to stop and wait before EOP +Class1SwitchingCmd: <delay:9> # silence between HDLC recv and trans +Class1TrainingRecovery: 1500 # 1.5sec delay after training failure +Class1RecvAbortOK: 200 # wait 200ms for abort response +Class1FrameOverhead: 4 # 4 byte overhead in recvd HDLC frames +Class1RecvIdentTimer: 40000 # 35+5secs waiting for ident frames +Class1TCFMaxNonZero: 10 # max 10% of data may be non-zero +Class1TCFMinRun: 1000 # min run is 2/3rds of TCF duration --- config/topic +++ config/topic @@ -5,7 +5,6 @@ # CONFIG:CLASS1:TP560.*:.*:.*: Manufacturer=Topic Model=TP560 # CONFIG:CLASS1:Hamlet H56XCT.*:.*:.*: Manufacturer=Hamlet Model=H56XCT -# CONFIG:CLASS1:Linux ISDN.*:.*:.*: Manufacturer=Sedlbauer Model=Speedfax # # BEGIN-SERVER # END-SERVER --- etc/Makefile.in +++ etc/Makefile.in @@ -88,6 +88,7 @@ ${PUTSERVER} -F ${SBIN} -m 755 -src probemodem.sh -O probemodem ${PUTSAMPLE} -F ${SPOOL}/etc -m 644 -o xferfaxlog ${PUTSAMPLE} -F ${SPOOL}/etc -m 600 -o hosts.hfaxd + ${PUTSAMPLE} -F ${SPOOL}/etc -m 644 -o users for i in ${DIALRULES}; do \ ${PUTSERVER} -F ${SPOOL}/etc -m 444 -src ${SRCDIR}/$$i \ -idb "config(update)" -O $$i; \ --- etc/users +++ etc/users @@ -0,0 +1,6 @@ +# +# Sample users file for FaxDispatch on ISDN lines +# format: <email> <MSN or extention> +# +user1@example.com 123 +user2@example.com 124 --- faxd/ClassModem.c++ +++ faxd/ClassModem.c++ @@ -888,6 +888,9 @@ case 'R': if (streq(buf, "RING")) // NB: avoid match of RINGING lastResponse = AT_RING; + else if (strneq(buf, "RING/", 5)) { // Match RING/CALLEDPARTYNUMBER + lastResponse = AT_RING; + } break; case 'V': if (streq(buf, "VCON")) @@ -1432,6 +1435,12 @@ if (conf.ringExtended.length() && strneq(rbuf, conf.ringExtended, conf.ringExtended.length())) // extended RING gotring = true; conf.parseCallID(rbuf, callid); + fxStr callid_formatted; + for (u_int i = 0; i < callid.size(); i++) { + callid_formatted.append(callid.id(i)); + callid_formatted.append(","); + } + modemTrace("MODEM CID %s", (const char *)callid_formatted); /* DID modems may send DID data in lieu of RING */ for (u_int i = 0; i < conf.idConfig.length(); i++) { if (conf.idConfig[i].answerlength && callid.length(i) >= conf.idConfig[i].answerlength) @@ -1460,6 +1469,12 @@ * with AT+VRID if we missed it before. */ conf.parseCallID(rbuf, callid); + fxStr callid_formatted; + for (u_int i = 0; i < callid.size(); i++) { + callid_formatted.append(callid.id(i)); + callid_formatted.append(","); + } + modemTrace("MODEM CID %s", (const char *)callid_formatted); } if (r == AT_OK) cmddone = true; else if (r == AT_VCON) cmddone = true; // VCON for modems that require ATA --- faxd/FaxServer.c++ +++ faxd/FaxServer.c++ @@ -250,6 +250,10 @@ FaxServer::readConfig(const fxStr& filename) { ModemServer::readConfig(filename); + if ((FAXNumber == "") && (phoneNumber != "")) + FAXNumber = "+" | getcountryCode() | + "." | getareaCode() | + "." | phoneNumber; if (localIdentifier == "") setLocalIdentifier(canonicalizePhoneNumber(FAXNumber)); } --- faxd/ServerConfig.c++ +++ faxd/ServerConfig.c++ @@ -85,6 +85,7 @@ ServerConfig::S_stringtag ServerConfig::strings[] = { { "logfacility", &ServerConfig::logFacility, LOG_FAX }, { "faxnumber", &ServerConfig::FAXNumber }, +{ "phonenumber", &ServerConfig::phoneNumber }, { "areacode", &ServerConfig::areaCode }, { "countrycode", &ServerConfig::countryCode }, { "longdistanceprefix", &ServerConfig::longDistancePrefix }, --- faxd/ServerConfig.h +++ faxd/ServerConfig.h @@ -124,6 +124,7 @@ u_int maxConsecutiveBadCalls; // max consecutive bad phone calls fxStr localIdentifier; // to use in place of FAXNumber fxStr FAXNumber; // phone number + fxStr phoneNumber; // the local number without area code u_int maxSetupAttempts; // # times to try initializing modem bool batchLogs; // Batch session logs togther or not @@ -133,6 +134,8 @@ fxStr canonicalizePhoneNumber(const fxStr& ds); fxStr prepareDialString(const fxStr& ds); + const fxStr& getareaCode() const; + const fxStr& getcountryCode() const; UUCPLock* getUUCPLock(const fxStr& deviceName); @@ -145,4 +148,8 @@ void configError(const char* fmt, ...); void configTrace(const char* fmt, ...); }; + +inline const fxStr& ServerConfig::getareaCode() const { return areaCode; } +inline const fxStr& ServerConfig::getcountryCode() const { return countryCode; } + #endif /* _ServerConfig_ */ --- faxsend +++ faxsend @@ -0,0 +1,28 @@ +#!/bin/sh +# +# This script is a wrapper to call the correct faxsend +# program, depending of the modem type +# +PARA=$* +SENDFAX=/usr/lib/fax/faxsend + +m_found="no" +while [ $# -gt 0 ]; do + case $1 in + "-m") + m_found="yes" + ;; + faxCAPI*) + if [ "$m_found" = "yes" ]; then + SENDFAX=/usr/bin/c2faxsend + fi + m_found="no" + ;; + *) + m_found="no" + ;; + esac + shift +done + +$SENDFAX $PARA --- util/FaxDispatch.sh +++ util/FaxDispatch.sh @@ -0,0 +1,12 @@ +# +# Dispatch fax to email depending on own MSN or extention (ISDN lines) +# sourced from faxrcvd +# +if [ "$7" != "" ]; then + PHONEMATCH=$7\$ + USERENTRY=`grep -v "^#" etc/users | grep "$PHONEMATCH"` + if [ "$USERENTRY" != "" ]; then + USERNAME=`echo $USERENTRY | awk '{print $1}'` + SENDTO="$USERNAME" + fi +fi --- util/Makefile.in +++ util/Makefile.in @@ -150,6 +150,7 @@ ${PUTSUPD} -m 755 -src common-functions.sh -O common-functions ${PUTSUPD} -m 755 -src dictionary.sh -O dictionary ${PUTSUPD} -m 755 -src faxrcvd.sh -O faxrcvd + ${PUTSUPD} -m 755 -src ${SRCDIR}/FaxDispatch.sh -O FaxDispatch ${PUTSUPD} -m 755 -src pollrcvd.sh -O pollrcvd ${PUTSUPD} -m 755 -src mkcover.sh -O mkcover ${PUTSUPD} -m 755 -src wedged.sh -O wedged --- util/faxrcvd.sh.in +++ util/faxrcvd.sh.in @@ -139,8 +139,8 @@ # Apply customizations. All customizable variables should # be set to their non-customized defaults prior to this. # -if [ -f etc/FaxDispatch ]; then - . etc/FaxDispatch # NB: FaxDispatch sets SENDTO +if [ -f bin/FaxDispatch ]; then + . bin/FaxDispatch # NB: FaxDispatch sets SENDTO fi #
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
