File strongswan.spec of Package strongswan

Overview Repositories Revisions Requests Users Attributes Meta

File strongswan.spec of Package strongswan (Revision b42de958e68a37974af10149ca1fd18f)

Currently displaying revision b42de958e68a37974af10149ca1fd18f , Show latest

#
# spec file for package strongswan (Version 4.3.6)
#
# Copyright (c) 2010 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.

# Please submit bugfixes or comments via http://bugs.opensuse.org/
#

# norootforbuild

Name:           strongswan
%define         upstream_version 4.3.6
%define         strongswan_docdir %{_docdir}/%{name}
Version:        4.3.6
Release:        0
License:        GPL v2 or later
Group:          Productivity/Networking/Security
Summary:        StrongSwan -- OpenSource IPsec-based VPN Solution
Url:            http://www.strongswan.org/
PreReq:         gmp grep %insserv_prereq %fillup_prereq
Requires:       iproute2
Provides:       pluto klips ipsec VPN freeswan
Obsoletes:      freeswan
Conflicts:      openswan
AutoReqProv:    on
Source0:        http://download.strongswan.org/strongswan-%{upstream_version}.tar.bz2
Source1:        http://download.strongswan.org/strongswan-%{upstream_version}.tar.bz2.sig
Source2:        %{name}.init.in
Source3:        %{name}-%{version}-rpmlintrc
Patch1:         %{name}_modprobe_syslog.patch
BuildRoot:      %{_tmppath}/%{name}-%{version}-build
BuildRequires:  bison flex gmp-devel gperf pkg-config
BuildRequires:  libcap-devel
BuildRequires:  libopenssl-devel
BuildRequires:  libgcrypt-devel
BuildRequires:  openldap2-devel
BuildRequires:  curl-devel

%description
StrongSwan is an OpenSource IPsec-based VPN Solution for Linux

* runs both on Linux 2.4 (KLIPS IPsec) and Linux 2.6 (NETKEY IPsec) kernels
* implements both the IKEv1 and IKEv2 (RFC 4306) key exchange protocols
* Fully tested support of IPv6 IPsec tunnel and transport connections
* Dynamical IP address and interface update with IKEv2 MOBIKE (RFC 4555)
* Automatic insertion and deletion of IPsec-policy-based firewall rules
* Strong 128/192/256 bit AES or Camellia encryption, 3DES support
* NAT-Traversal via UDP encapsulation and port floating (RFC 3947)
* Dead Peer Detection (DPD, RFC 3706) takes care of dangling tunnels
* Static virtual IPs and IKEv1 ModeConfig pull and push modes
* XAUTH server and client functionality on top of IKEv1 Main Mode authentication
* Virtual IP address pool managed by IKE daemon or SQL database
* Secure IKEv2 EAP user authentication (EAP-SIM, EAP-AKA, EAP-MSCHAPv2, etc.)
* Optional relaying of EAP messages to AAA server via EAP-RADIUS plugin
* Support of IKEv2 Multiple Authentication Exchanges (RFC 4739)
* Authentication based on X.509 certificates or preshared keys
* Generation of a default self-signed certificate during first strongSwan startup
* Retrieval and local caching of Certificate Revocation Lists via HTTP or LDAP
* Full support of the Online Certificate Status Protocol (OCSP, RCF 2560).
* CA management (OCSP and CRL URIs, default LDAP server)
* Powerful IPsec policies based on wildcards or intermediate CAs
* Group policies based on X.509 attribute certificates (RFC 3281)
* Storage of RSA private keys and certificates on a smartcard (PKCS #11 interface)
* Modular plugins for crypto algorithms and relational database interfaces
* Support of elliptic curve DH groups and ECDSA certificates (Suite B, RFC 4869)
* Optional built-in integrity and crypto tests for plugins and libraries

Authors:
--------
    Andreas Steffen
    and others

%package doc
License:        GPL v2 or later
Summary:        StrongSwan -- OpenSource IPsec-based VPN Solution
Group:          Productivity/Networking/Security

%description doc
StrongSwan is an OpenSource IPsec-based VPN Solution for Linux

This package provides the StrongSwan documentation.

Authors:
--------
    Andreas Steffen
    and others

%prep
%setup -q -n %{name}-%{upstream_version}
%patch1 -p0
sed -e 's|@libexecdir@|%_libexecdir|g'    \
     < $RPM_SOURCE_DIR/strongswan.init.in \
     > strongswan.init

%build
CFLAGS="$RPM_OPT_FLAGS -W -Wall -Wno-pointer-sign -Wno-strict-aliasing"
export RPM_OPT_FLAGS CFLAGS
libtoolize --force
%{?suse_update_config:%{suse_update_config -f}}
autoreconf
%configure \
	--enable-integrity-test \
	--with-capabilities=libcap \
	--with-resolv-conf=%{_localstatedir}/run/strongswan/resolv.conf \
	--enable-smartcard \
	--with-default-pkcs11=%{_libdir}/opensc-pkcs11.so \
	--enable-cisco-quirks \
	--enable-openssl \
	--enable-gcrypt \
	--enable-ldap \
	--enable-curl
make %{?_smp_mflags:%_smp_mflags}

%install
export RPM_BUILD_ROOT
install -m755 -d              ${RPM_BUILD_ROOT}%{_sbindir}/
install -m755 -d              ${RPM_BUILD_ROOT}%{_sysconfdir}/ipsec.d/
install -m755 -d              ${RPM_BUILD_ROOT}%{_sysconfdir}/init.d/
install -m755 strongswan.init ${RPM_BUILD_ROOT}%{_sysconfdir}/init.d/ipsec
ln -s   %{_sysconfdir}/init.d/ipsec ${RPM_BUILD_ROOT}%{_sbindir}/rcipsec
#
make install DESTDIR="$RPM_BUILD_ROOT"
#
rm -f ${RPM_BUILD_ROOT}%{_sysconfdir}/ipsec.secrets
cat << EOT > ${RPM_BUILD_ROOT}%{_sysconfdir}/ipsec.secrets
#
# ipsec.secrets
#
# This file holds the RSA private keys or the PSK preshared secrets for
# the IKE/IPsec authentication. See the ipsec.secrets(5) manual page.
#
EOT
#
rm -f $RPM_BUILD_ROOT%{_libdir}/libstrongswan.{so,a,la}
find  $RPM_BUILD_ROOT%{_libexecdir}/ipsec \
      -name "*.a" -o -name "*.la" | xargs -r rm -f
#
install -m755 -d ${RPM_BUILD_ROOT}%{strongswan_docdir}/
install -m644 TODO NEWS README COPYING CREDITS \
                 ${RPM_BUILD_ROOT}%{strongswan_docdir}/
install -m755 -d $RPM_BUILD_ROOT%{_localstatedir}/run/strongswan

%post
%{run_ldconfig}
%{fillup_and_insserv ipsec}

%preun
%{stop_on_removal ipsec}
if test -s %{_sysconfdir}/ipsec.secrets.rpmsave; then
  cp -p --backup=numbered %{_sysconfdir}/ipsec.secrets.rpmsave %{_sysconfdir}/ipsec.secrets.rpmsave.old
fi
if test -s %{_sysconfdir}/ipsec.conf.rpmsave; then
  cp -p --backup=numbered %{_sysconfdir}/ipsec.conf.rpmsave %{_sysconfdir}/ipsec.conf.rpmsave.old
fi

%postun
%{run_ldconfig}
%{insserv_cleanup}

%files
%defattr(-,root,root)
%config(noreplace) %attr(600,root,root) %{_sysconfdir}/ipsec.conf
%config(noreplace) %attr(600,root,root) %{_sysconfdir}/ipsec.secrets
%config(noreplace) %attr(600,root,root) %{_sysconfdir}/strongswan.conf
%dir %{_sysconfdir}/ipsec.d
%dir %{_sysconfdir}/ipsec.d/crls
%dir %{_sysconfdir}/ipsec.d/reqs
%dir %{_sysconfdir}/ipsec.d/certs
%dir %{_sysconfdir}/ipsec.d/acerts
%dir %{_sysconfdir}/ipsec.d/aacerts
%dir %{_sysconfdir}/ipsec.d/cacerts
%dir %{_sysconfdir}/ipsec.d/ocspcerts
%dir %attr(700,root,root) %{_sysconfdir}/ipsec.d/private
%config %{_sysconfdir}/init.d/ipsec
%{_sbindir}/rcipsec
%{_sbindir}/ipsec
%{_libexecdir}/ipsec
%{_libdir}/libstrongswan.*
%{_mandir}/man5/ipsec.conf.5*
%{_mandir}/man5/ipsec.secrets.5*
%{_mandir}/man8/ipsec.8*
%dir %{_localstatedir}/run/strongswan

%files doc
%defattr(-,root,root)
%dir %{strongswan_docdir}
%{strongswan_docdir}/TODO
%{strongswan_docdir}/NEWS
%{strongswan_docdir}/README
%{strongswan_docdir}/COPYING
%{strongswan_docdir}/CREDITS
%{_mandir}/man3/anyaddr.3*
%{_mandir}/man3/atoaddr.3*
%{_mandir}/man3/atoasr.3*
%{_mandir}/man3/atosa.3*
%{_mandir}/man3/atoul.3*
%{_mandir}/man3/goodmask.3*
%{_mandir}/man3/initaddr.3*
%{_mandir}/man3/initsubnet.3*
%{_mandir}/man3/keyblobtoid.3*
%{_mandir}/man3/portof.3*
%{_mandir}/man3/prng.3*
%{_mandir}/man3/rangetosubnet.3*
%{_mandir}/man3/sameaddr.3*
%{_mandir}/man3/subnetof.3*
%{_mandir}/man3/ttoaddr.3*
%{_mandir}/man3/ttodata.3*
%{_mandir}/man3/ttosa.3*
%{_mandir}/man3/ttoul.3*
%{_mandir}/man8/_copyright.8*
%{_mandir}/man8/_updown.8*
%{_mandir}/man8/_updown_espmark.8*
%{_mandir}/man8/openac.8*
%{_mandir}/man8/pluto.8*
%{_mandir}/man8/scepclient.8*
%{_mandir}/man8/starter.8*

%changelog

Places

File strongswan.spec of Package strongswan (Revision b42de958e68a37974af10149ca1fd18f)

Places