openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File crash.changes of Package crash

-------------------------------------------------------------------
Fri Jan  7 15:46:51 UTC 2011 - ptesarik@novell.com

- crash-xen-per_cpu-init_tss.patch: init_tss is a per-cpu variable
  in Xen-4.0.0 (bnc#612128).
- crash-xen-x86_64-increase-max-vcpus.patch: x86_64 can have up to
  8192 virtual CPUs with Xen-4.0.0 (bnc#612128).
- crash-xen-domain_vcpu.patch: Xen-4.0.0. vcpu array is no longer
  embedded in struct domain (bnc#612128).
- crash-xen-opt_sched.patch: opt_sched is __initdata in Xen-4.0.0,
  so it's value is not available in the crash dump. Use opt as a
  replacement (bnc#612128).
- crash-xen_virt_start.patch: account for the changed value of
  XEN_VIRT_START in Xen-4.0.0 (bnc#612128).
- crash-xen-per_cpu_shift.patch: correctly determine PERCPU_SHIFT
  for Xen syms (bnc#612128).

-------------------------------------------------------------------
Mon Jan  3 20:09:41 UTC 2011 - dmair@novell.com

- Update to 5.1.1
  o Fix for the potential to miss tasks when walking the pid_hash
    table in 2.6.24 and later kernels.  Without the patch, the task
    will simply not be seen in the gathered task list.

o Enhancement for the ARM architecture's "bt" command  to print
    out the user space register set for tasks entering the kernel
    via the syscall entry point.

o Rework of the handling of "set" commands that are put in 
    .crashrc files so that only the following options are resolved
    prior to session initialization: silent, console, core, edit,
    namelist, and zero_excluded.  All others are resolved
    immediately after session initialization is complete.
    Accordingly, the use of "set -c <cpu>", "set -p",
    "set -a [task|pid]" and set [pid|task]" are now acceptable
    .crashrc commands.

o The entering of "set -v" in a .crashrc file would cause an
    immediate segmentation violation.  The "set" command rework
    above defers the command until session initialization is
    complete.

o The entering of "set dumpfile <filename>" in a .crashrc file
    would cause a fatal "seek" error during session initalization
    with most most dumpfile types, so the "dumpfile" option has
    been removed from the "set" command.

o The execution of "alias" commands from a .crashrc file used to
    be performed immediately; that behavior has been changed so
    that they are executed immediately after session initialization
    is complete.

o Enhancement of the "repeat" command to allow command aliases.

o Fix for running "kmem -s" on a live system if an offline cpu is
    brought back online while the command is executing.  Without
    the patch, the online operation may cause a segmentation
    violation.

o Change the behavior of "bt -[tT]" to allow the command options
    to be run on active tasks on live systems.  Without the patch,
    both command options would display the task data banner
    followed by "(active)".

o Fix for the ARM architecuture's "irq" command when run on
    2.6.36 and later kernels.  Without the patch, the command fails
    with the error message "irq: invalid kernel virtual address: 23
    type: irq_chip typename".   The fix replaces the custom ARM IRQ
    dumping function with the architecture-neutral version.

o Introduced support for using /proc/kcore as an alternative
    source of live memory to /dev/mem.  Doing so allows vmalloc
    memory access on 32-bit architectures when the underlying
    mapped physical memory is in highmem, which is not allowed by
    the /dev/mem driver.  It would also be usable on systems that
    are configured with CONFIG_STRICT_DEVMEM but still configured
    with CONFIG_PROC_KCORE.  To enforce the use of /proc/kcore, it
    may be entered on the command line.

o If a live crash session attempts to use /dev/mem as a live
    memory source, and it is determined that the system is
    configured with CONFIG_STRICT_DEVMEM, /proc/kcore will
    automatically be tried as an alternative.

o Fix to allow "/dev/crash" to be entered on the command line for
    live sessions.  Because it is used automatically if it exists,
    it is never necessary to enter it on the command line.  However,
    if it is used, without the patch, the session fails during
    initializaion with the error message "crash: /dev/crash: No
    such file or directory" if the crash.ko driver is a module, or
    "crash: /dev/crash: not a supported file format" if the driver
    is built into the kernel.

o Fix for the ARM "bt" command to address the issue behind faulty
    warning messages that indicate "WARNING: UNWIND: unsupported
    personality routine".

o Fix for the ARM "bt" command to address the issue behind faulty
    warning messages that indicate "bt: WARNING: UNWIND: cannot
    find index for <address>".

-------------------------------------------------------------------
Mon Dec 13 20:06:50 UTC 2010 - dmair@novell.com

- Update to 5.1.0
  o x86: Fix for the "bt" command for active, non-chrashing, tasks 
    on 2.6.31 and later kernels without CONFIG_4KSTACKS.
  o x86 and x86_64: Add module names to "bt" outputs.
  o Enhance the "sym" command to display the containing module
    name in brackets.
  o Support module per-cpu symbols after they are loaded with
    the "mod -[sS]" command.
  o x86: Fix for the "bt" command to properly handle a
    NMI-interrupted idle task running in cpu_idle().
  o s390x: Support for compressed kdump dumpfiles created by the
    makedumpfile facility.
  o x86 Xen guest: Fix for the "bt" command where a vcpu received
    a shutdown NMI while running in the event_check_interrupt()
    interrupt handler.
  o x86 Xen guest: Fix for the "bt" command where a vcpu received
    a shutdown NMI while running in the hypercall entry point.
  o s390x: Fix for the "help -n" output on ELF vmcore dumpfiles
    to recognize the several architecture specific n_types.
  o s390x Fix for the "help -n" output on ELF vmcore dumpfiles
    to properly dump the contents of the descriptor data of each
    Elf64_Nhdr note.
  o Fix for the "help -n" output for diskdump and compressed kdump
    files to show the filename as stored in the per-file
    diskdump_data structure.
  o Resurrection of the "irq -b" command option for 2.6 kernels.
  o Fix for displaying data generated from shell-escaped commands
    when the data contains a "%" character followed by a
    conversion character
  o Re-worked the do_radix_tree() utility function to work without
    depending upon a hardwired copy of the kernel's
    radix_tree_node structure, and changed various RADIX_TREE
    values into dynamically calculated values.
  o Call FREEBUF() on a GETBUF()-generated buffer ub the
    do_radix_tree() utility function.
  o x86_64: Store the .debug_frame section offset and size from
    the vmlinux file and use its data as an alternative to the
    .eh_frame section data.
  o Fix for errors or nonsensical output from the "irq" command
    when run on 2.6.29 kernels.
  o Fix for error output from the "irq" command when run on 2.6.34
    and later kernels.

-------------------------------------------------------------------
Mon Oct 11 12:24:58 UTC 2010 - ptesarik@novell.com

- Update to 5.0.8
  o x86_64: Fix the "bt" command on 2.6.30 and later kernels when
    using a System.map file.  
  o Fix KVM error messages generated by store_mapfile_offset() and
    and load_mapfile_offset() when an invalid physical address is
    issued.
  o Fix the "sig" command on 2.6.35 and later kernels.
  o Fix the "net -s" command option on 2.6.33 and later kernels. 
  o Fix the "mod" command on 2.6.35 and later kernels.
  o Fix the "mount -f" command on 2.6.36 and later kernels.
  o Fix missing "/dev" prefix for files in the /dev directory
    listed by the "files" command.
  o x86_64: Use cpu_present_map instead of cpu_online_map to
    determine the CPU count.
  o x86_64: Fix the "bt" command on 2.6.27 and later kernels to
    prevent the possible display of an invalid "vgettimeofday"
    frame above the topmost "system_call_fastpath" frame.
  o s390x: Read pointers above 4GiB correctly with the "s390dbf"
    command.
  o Allow building crash as an x86 binary for ARM dumpfiles on an
    x86_64 host.
  o Simplify the ARM build procedure after an initial ARM build has 
    been completed in a crash source tree.
  o Allow building crash as an x86 binary on an x86_64 host.
  o Fix a regression in get_text_init_space() due to logic added by
    the ARM processor support.
  o SMP support SMP for the ARM architecture.
  o x86_64: Fix the "bt" command on 2.6.31 and later kernels to
    display the the exception frame from the forced oops after
    issuing an "echo c > /proc/sysrq-trigger".
  o Recognize module "init" symbols that are still valid.

-------------------------------------------------------------------
Mon Sep 20 14:56:17 UTC 2010 - ptesarik@novell.com

- Update to 5.0.7
  o ARM processor support.
  o Support KVM dumpfiles that have "ram" device header sections
    with a version_id of 4.
  o Support KVM dumpfiles from guests that were provisioned with
    more than 3.5GB of RAM.
  o Minor fix to memory.c to address a compiler warning.
  o "mount": Fix a segmentation violation if the "init" task
    (PID 1) does not exist.
  o x86_64: Show "RT" in exception stack name strings on realtime
    (CONFIG_PREEMPT_RT) kernels, because RT kernels may use the
    same per-cpu stack for different exception types.
  o Show tasks that could be missed in 2.6.23 and earlier kernels.
  o Fix the incorrect presumption that the kernel's
    task_state_array[] is NULL terminated.

-------------------------------------------------------------------
Mon Sep 20 13:38:11 UTC 2010 - ptesarik@novell.com

- Update to 5.0.6
  o x86_64: Fix 2.6.27 and later xendump and Xen kdump dumpfiles
    ("missing end_pfn")
  o Allow redirecting the output of "s390dbf" to a pipe.
  o x86: Improve the backtrace end detection algorithm in "bt" for
    tasks entering the kernel from user-space.
  o Warn about machine type mismatch when attempting to use a ppc64
    vmlinux file on a non-ppc64 64-bit host.
  o x86_64: Fix the "bt" command if the kdump-generated NMI
    interrupts a multi-threaded task that has just entered kernel
    space and has not changed the user-space RSP register.
  o Allow changing internal variables in --minimal mode with the
    "set" command.
  o x86: Fix the "vtop" command on Xen PAE kernels.
  o x86, x86_64: Support running against live pv_ops/Xen guest
    kernels.
  o x86, x86_64: Support xendump ELF dumpfiles generated from 
    pvops/Xen guest kernels.
  o Determine the bit positions of PG_reserved and PG_slab using
    the newer pageflags enumerator values if available.
  o Prevent the "repeat" command from keeping a crash session
    alive if the controlling terminal session is killed.

-------------------------------------------------------------------
Wed Jul 14 13:12:19 UTC 2010 - ptesarik@novell.com

- crash-compressed-booted-kernel: correctly find the booted kernel
  even if compressed (bnc#581159).

-------------------------------------------------------------------
Tue Jun 22 10:33:40 UTC 2010 - ptesarik@novell.com

- Update to 5.0.5
  o Add "bt -F" flag: same as "bt -f" but symbolic expressions are
    preferred (similar to "rd -S").
  o Fix for the %install stanza in the crash.spec file to check for
    the existence of the sial.so extension module.
  o Fix a confusing "foreach:" prefix in the error message
    displayed by the "crash -x" command line option when the
    pre-loading of an extension module fails.
  o x86_64: Fix "bt" and "bt -E" if the kdump-generated NMI
    interrupts a task that has just entered kernel space but has
    not yet changed the RSP register to the kernel stack.
  o x86: Fix "bt" if the crash occurs during the execution of a
    kernel module's init_module() function.
  o Fix "kmem -[sS]" on 2.6.34 and later CONFIG_SLUB kernels, which
    changed the kmem_cache.cpu_slab[NR_CPUS] array to be a per-cpu
    offset value.
  o Show hexadecimal values in the "INDEX" colum of "kmem -p",
    because because "page.index" is typically a shared-use field
    that may also contain a pointer value.
  o Fix "kmem <address>" if the kernel's free page lists are
    corrupt, or in a state of flux, and cannot be followed.
  o Support newer "virsh dump"-generated KVM formats that may
    contain "block" and "kvmclock" devices in the dumpfile header.
  o Support "virsh dump"-generated KVM dumpfiles of a RHEL5 guest
    from a RHEL6 host, and to support dumpfile format changes
    that contain "apic" and "__rhel5" devices.
  o Fix a compiler warning when building gdb_interface.c with -O2.
  o Fix compiler warnings when building net.c with -O2.

-------------------------------------------------------------------
Mon Jun 21 16:17:01 UTC 2010 - ptesarik@novell.com

- Update to 5.0.4
  o x86: Fix "bt" when a newly-forked task's resumption EIP value
    points to "ret_from_fork".
  o x86: Fix "bt" when an NMI interrupts a task early during system
    call entry.
  o x86_64: Fix "bt" on 2.6.29 and later to recognize and display
    exception frames generated by exceptions that do not result in
    a stack switch, such as general protection faults.
  o ppc64: Account for an update to the kernel patch for
    CONFIG_SPARSEMEM_VMEMMAP.
  o Improve "dev -p" error message on 2.6.26 or later kernels,
    which no longer have the "pci_devices" global variable.
  o s390(x): Display "CPU offline" when doing a backtrace of the
    "swapper" task on an offline CPU.
  o x86_64: Fix per-cpu symbols on 2.6.34 and later kernels by
    allowing them to be of type 'd' or 'D'.
  o x86_64: Fix a segmentation violation during initialization in
    x86_64_get_active_set().
  o Support KVM dumpfiles created with "virsh dump" that create
    "cpu" header sections using a QEMU CPU_SAVE_VERSION version
    greater than the supported version of 9.
  o x86_64: Fix for KVM dumpfiles created with "virsh dump", whose
    kernels have a "_text" virtual address higher than
    __START_KERNEL_map.
  o Add a "map" command for specifying the memory map of KVM guest
    dumpfiles created with "virsh dump".
  o x86_64: Correctly calculate the physical base address of a
    fully-virtualized RHEL6 guest kernel running on a RHEL5 Xen
    host.
  o x86_64: Fix "bt" on inactive (blocked) tasks for 2.6.33 and
    later kernels, which have the "thread_return" symbol removed
    from the embedded "switch_to" macro.
  o x86: Fix for "bt" on 2.6.33 and later kernels, which moved
    the "system_call" symbol to the .kprobes.text section.
  o Fix a segmentation violation in the "trace" extension module,
    as seen when running "trace show -c <cpu>".
  o Add a "trace dump -t" command for the "trace" extension module.

-------------------------------------------------------------------
Tue Apr 20 18:37:33 UTC 2010 - bernhard@bwalle.de

- Update to 5.0.3
  o Fix for running against 2.6.34 and later kernels to recognize
    and handle changes in the kernel's per-cpu data symbol naming,
    which no longer prefixes "per_cpu__" to declared per-cpu symbol
    names.
  o Fix for "swap" and "kmem -i" commands on 2.6.29 or later,
    big-endian, ppc64 kernels, where the swap_info_struct.flags
    member was changed from an int to a long.
  o Fix for the "vm" and "ps" command's task RSS value on 2.6.34
    or later kernels.
  o Fixed "possible aternatives" spelling typo used in informational
    messages when an incorrect/unknown symbol name is used in "rd",
    "dis", "sym" and "struct" commands.
  o Fix for CONFIG_SPARSEMEM kernels that are not configured with
    CONFIG_SPARSEMEM_EXTREME.
  o Change the output of the "kmem -[cC]" options to indicate that
    they are not supported when that is relevant.
- Refresh crash-compressed-kernel and crash-sles9-time.patch.

-------------------------------------------------------------------
Thu Apr  1 11:57:22 CEST 2010 - ptesarik@novell.com

- crash-missing-declarations.patch: add a missing include (fixes
  compilation on ppc64).

-------------------------------------------------------------------
Mon Mar 29 10:39:13 CEST 2010 - ptesarik@novell.com

- Update to 5.0.2
  o Fix "mod -[sS]" if the attempt to load a kernel module fails
    due to an internal gdb error.
  o Avoid recalculation and modification of module symbol values
    from their CONFIG_KALLSYMS-generated values.
  o Fix a bug in reading some dumpfiles created with the "snap"
    extension.
  o s390, s390x: fix several bugs in the stack backtrace code.
  o x86, x86_64: fix "mach -m" if the BIOS-provided e820 map
    contains unusable EFI-related memory type values.
  o Fix the "bool" type in SIAL.
  o x86: avoid a stream of harmless but annoying error messages
    when running "crash -d4" (or any larger -d debug value).
  o Fix "kmem -s list" on non-CONFIG_SLUB kernels that contain a
    "cache_chain" symbol instead of a "cache_chain" macro.
  o x86_64: let "bt" use the stored frame pointers if the kernel
    was compiled with CONFIG_FRAME_POINTER.
  o ppc64: show the number of online cpus in the initial system
    banner and the "sys" and "mach" commands.
  o x86_64: fix the stack frame size calculator on kernels that
    were built without CONFIG_FRAME_POINTER.
  o Avoid an endless loop on EOF from /dev/tty.
  o "ps -t": display utime and stime values unmodified on kernels
    that store them in a cputime_t.
  o x86: fix "bt" if the kdump-generated NMI interrupts a process
    in kernel space before the full user-mode exception frame gets
    written on the kernel stack.
  o x86: fix "bt -e" on 2.6.30 or later if crash is compiled with
    -D_FORTIFY_SOURCE.
  o Fix initialization-time failures on 2.6.34 and later kernels
    built with CONFIG_NO_BOOTMEM.
  o ppc, ppc64: fix the displayed processor speed.
  o ppc64: support for an IBM-proposed kernel patch for
    CONFIG_SPARSEMEM_VMEMMAP kernels that will store vmemmap page
    mapping information.
  o Fix "kmem -[sS]" on live CONFIG_SLAB systems to prevent the
    redundant reading of the shared array_cache object list from
    the per-node kmem_list3 data structures.

-------------------------------------------------------------------
Sat Mar 20 15:55:57 UTC 2010 - bernhard@bwalle.de

- Update README.SUSE:
  o The search paths are no longer SUSE specific.
  o The command 'extend sial.so' (with suffix) is needed to load
    the SIAL extension.

-------------------------------------------------------------------
Fri Mar 12 19:11:51 UTC 2010 - bernhard@bwalle.de

- Fix sps command from SIAL ps.c for kernel >= 2.6.29.

-------------------------------------------------------------------
Tue Feb 23 18:56:25 CET 2010 - ptesarik@novell.com

- crash-rl_digit_loop-return.patch: add the missing return to
  the embedded readline.

-------------------------------------------------------------------
Tue Feb 23 12:38:25 CET 2010 - ptesarik@novell.com

- Update to 5.0.1
  o Fix "irq" on 2.6.33 and later kernels.
  o Fix "swap", "kmem -i", and "vm -p" on 2.6.33 and later.
  o Fix "bt" on an ia64 "INIT" process that interrupted a task that
    was running in user space, but was unable to modify the
    original (interrupted) task's stack.
  o Fix "bt" on offline s390/s390x "swapper" idle tasks.
  o x86, s390, s390x, ia64: use the highest online CPU number plus
    one as the system CPU count.
  o Correctly recognize per-cpu variables.
  o Let "struct" or "union" fail gracefully if given an unmapped or
    non-existent address.
  o Fix support of >4GB Xen domU dumpfiles.
  o Account for the renaming of the st_status_fixed_logout _lowcore
    struct member in 2.6.33 and later s390 and s390x kernels.
  o Add a defensive mechanism to handle corrupted "cache_cache".
  o Fix a startup segfault with 2.6.30 or later x86_64 dumpfiles
    from kernels compiled without CONFIG_SMP.
  o Fix a startup segfault if a kernel crashes while loding a
    kernel module.
  o Fix build failures with gcc-4.5 on x86_64.
  o Use mkstemps() from the built-in libiberty.a to allow running
    crash with pre-2.11 glibc versions.
  o Accept gdb-7.0 disassembler output on 2.6.20 and earlier x86
    kernels.
  o Fix a gdb-7.0 regression that prevented "dis -l" from showing
    line numbers for some x86 base kernel text addresses.
  o Preparation for future s390x ELF dumpfile format.
- Delete crash-large-xendump.patch: now solved in mainline.

-------------------------------------------------------------------
Thu Feb 12 19:20:56 CET 2010 - ptesarik@novell.com

- crash-large-xendump.patch: properly handle xendumps larger than
  4GBs.  (bnc#542170)

-------------------------------------------------------------------
Tue Feb 12 18:18:27 CET 2010 - ptesarik@novell.com

- crash-Makefile-ADD_CFLAGS: remove
  Upstream has honoured the CFLAGS settings since 4.0-8.12.

-------------------------------------------------------------------
Fri Feb 12 17:41:58 CET 2010 - ptesarik@novell.com

- Update to 5.0.0
  o Update embedded gdb to FSF gdb-7.0.
  o Always recognize and display BUG()-induced exception frames
    when doing a backtrace on 2.6.29 and later x86_64 kernels.
  o Fix "ps -r" segfaults with 2.6.25 or later.
  o Fix "mount" on 2.6.32 and later (except "mount -i", which
    cannot be easily implemented for these kernel versions).
  o Recognize VMEMMAP_REGION virtual addresses in 2.6.26 and later
    ppc64 kernels compiled with CONFIG_SPARSEMEM_VMEMMAP.
  o Fix a 4.0-8.11 regression in determining the number of cpus
    on ppc64.
  o Fix "irq" on ppc64 kernel which do not define "irq_desc_t" as
    a typedef for "struct irq_desc".
  o Avoid the unnecessary "WARNING: sparsemem: invalid section number:"
    message when doing "rd" or "kmem" on CONFIG_SPARSEMEM_EXTREME kernels.

-------------------------------------------------------------------
Fri Feb  5 01:12:43 UTC 2010 - jengelh@medozas.de

- Construct an ExclusiveArch tag for specfile to match
  source-code capabilities

-------------------------------------------------------------------
Tue Jan  5 13:03:25 CET 2010 - ptesarik@suse.cz

- Update to 4.1.2
  o Fix initialization failure with 2.6.31 or later x86_64
    CONFIG_NEED_MULTIPLE_NODES kernels running on systems that have
    multiple NUMA nodes.
  o Fix the snap.c extension module to properly handle NUMA systems
    with multiple nodes, or single-node systems whose first
    unity-mapped PT_LOAD segment starts on a non-zero physical
    address.
  o Fix "bt [-t|-T]" on x86 when the backtrace passes through three
    stacks (hard IRQ, soft IRQ, process).
  o Do not warn about "non-process stack address for this task"
    when "bt -S" is given a legitimate hard or soft IRQ stack
    address, or an x86_64 exception stack address.
  o Add a defensive mechanism to handle corrupt ELF core headers.
  o More non-functional changes for future integration of gdb-7.0 and 
    for addressing Fedora packaging guidelines.
- fixed reference to an uninitialized struct member

-------------------------------------------------------------------
Mon Dec  7 13:48:02 CET 2009 - ptesarik@suse.cz

- Update to 4.1.1
  o Add "lsmod" as a built-in alias for the "mod" command.
  o Enhance "bt" on x86_64 to display which one of the five exception
    stacks it is operating on.
  o Add defensive mechanism to handle corrupt Elf32_Nhdr/Elf64_Nhdr
    structures in an ELF vmcore.
  o Fix DEBUG exception stack size and stack base address on 2.6.18 and
    later x86_64 kernels.
  o Fix session initialization failure with 2.6.30 and later x86_64 kernels
    if the number of possible cpus equals the kernel's configured NR_CPUS.
  o Fix potential session initialization failure with 2.6.30 and later
    x86_64 kernel dumpfiles filtered by makedumpfile.
  o Fix "mach -c" on 2.6.30 and later x86_64 kernels.
  o Preparations in the top-level source code for the integration of 
    gbd-7.0.  The current embedded version remains gdb-6.1.

-------------------------------------------------------------------
Fri Oct  9 16:24:05 CEST 2009 - ptesarik@suse.cz

- Update to 4.1.0
  o Fix "extend" regression on s390x and x86, introduced in crash 4.0.9
    with the "-x" option
  o Cleanup top-level source files to address compiler warnings
    generated by the CFLAGS used in the Fedora build environment
  o Fix "pte" on s390 and s390x if the pte value argument evaluates as
    not present
  o Allow command redirection to pipes or files when using gdb commands 
    alone on the command line without preceding it with "gdb"
  o Fix the processing of bit fields on big endian systems in the SIAL
    extension module
  o Fix "dis -l" to properly display line-number information for 2.6.21
    and later x86_64 kernel module text addresses
  o Prevent querying the embedded gdb module for line numbers of kernel
    module text addresses if the module's debuginfo data has not been loaded
  o New option "ps -G" to restrict the process status output to the thread
    group leader of a thread group
  o Several fixes for the "repeat" command when used in conjunction
    with an input file.  Without the patch:
    - Depending upon the command executed from the input file, a SIGINT
      would kill the command currently being executed from the input file,
      but the "repeat" command would then restart it.
    - If a command in the input file redirected its output to a pipe, the
      repeat operation could stop prematurely after executing that particular
      command.
    - If a command in the input file redirected its output to a pipe, the
      zombies of the command being piped to would not be cleaned up until the
      repeat command was stopped.
    - If the last command in the input file redirected its output to a pipe,
      all subsequent executions of the input file would only display the
      output of that last command.
  o New extension: "trace.so"
  o Fix for a potential failure to initialize the kmem slab cache 
    subsystem on 2.6.22 and later CONFIG_SLAB kernels if the dumpfile
    has pages excluded by the makedumpfile facility
  o Fix a potential session initialization failure on x86_64 kernels
    if the dumpfile has pages excluded by the makedumpfile facility
  o Fix "kmem -z" on 2.6.29 and later kernels
  o Fix "irq" on 2.6.29 and later CONFIG_SPARSE_IRQ kernels
  o Fix "kmem -i" on 2.6.31 kernels
  o Fix "kmem -i" on x86_64 running 2.6.26 through 2.6.30
  o Fix "kmem -p" on older 64-bit kernels that have a 32-bit page.flags field
  o Fix "kmem -i" on older kernels whose unreferenced page.count value was -1
    (instead of 0)
  o Change the cursor location when cycling through the command history
    in "vi" editing mode (the default)

-------------------------------------------------------------------
Fri Oct  9 15:40:14 CEST 2009 - ptesarik@suse.cz

- Update to 4.0.9
  o New mainline versioning
  o Wholesale replacement of the x86/x86_64 disassembly code in the
    embedded gdb-6.1 module to that used in gdb-6.8 to correctly decode
    the 5-byte NOP used by the function tracer
  o Fix compressed diskdump/kdump vmcores to properly handle page
    descriptor structures that are located beyond a 4GB file offset
    in the vmcore file
  o Fix the "sym <address>" command option when the address references
    a symbol in the vsyscall FIXMAP virtual address page in certain
    x86_64 kernel versions
  o Multiple fixes for the "bt" command on x86_64:
    - properly recognize vsyscall FIXMAP virtual addresses when
      encountered as the RIP in an exception frame.
    - always use the NMI exception stack when available, not the per-cpu
      IRQ stack of an active non-crashing task
    - correctly determine the frame just above an IRQ interrupt exception
      frame, or above an exception frame that gets handled on the process
      stack, such as a page fault
    - correctly calculate the frame size to differentiate between text
      return addresses and the precise text RIP address of an exception
  o Fix usage of a System.map file argument with 2.6.30 and later kernels
    to avoid "crash: symbol count overflow (trace_kmalloc)" messages
  o Fix usage of a System.map file argument whose symbol list does not
    contain an "_end" symbol.
  o Fix "kmem -p <address>" or "kmem <address>" when <address> is not
    a page structure address to avoid the annoying "kmem: WARNING:
    sparsemem: invalid section number: 8192" messages
  o Fix the snap.so extension module when run on pre-2.6.31 x86_64
    kernels with more than 4GB of physical memory
  o Fix build of the snap.so extension module on older systems
    running with "make" versions 3.80 or earlier
  o Fix build of the sial.so extension module if /usr/bin/bison
    and /usr/bin/flex do not exist on the host build system
  o Fix for the "rd" and "vtop" commands on RHEL4 x86_64 Xen paravirtual
    kernels in the reading or translation of vmalloc addresses that are 
    not in kernel module vmalloc address space
  o New command line option "-x" to automatically load extension modules

-------------------------------------------------------------------
Fri Oct  9 15:14:31 CEST 2009 - ptesarik@suse.cz

- Update to 4.0-8.12
  o Support for the KVM "save-vm" file format
  o Support for 2.6.30 and later x86 CONFIG_4KSTACKS kernels, where
    hardirq_ctx[] and softirq_ctx[] arrays were changed to per-cpu
  o Replace the CFLAGS definition in the Makefile with a CRASH_CFLAGS
    definition, which in turn contains ${CFLAGS} to allow user-defined
    CFLAGS on the "make" command line
  o Bail out with a "not a supported file format" error immediately
    when trying to open x86 vmlinux file on an x86_64 host
  o Fix the "bt" command on x86 Xen hypervisor dumpfiles where a vcpu
    received a shutdown NMI while running in an interrupt handler
  o Correct cpu accounting when processors have been taken offline
    using a new get_highest_cpu_online() utility function
  o Fix a segmentation violation when running against kernels built
    with Fedora gcc version 4.4.0-12 and later, which introduced
    a more compact Dwarf 3 DW_AT_data_member location
  o Clean up gdb header files that generate warning messages when 
    compiling the top-level cmdline.c file with "make warn" or 
    "make Warn"
- Delete crash-4096-cpus-x86_64.diff: Mainline.

-------------------------------------------------------------------
Thu Jul  2 13:24:23 CEST 2009 - ptesarik@suse.cz

- Update to 4.0-8.11
  o Fix the mapping of CPU to NT_PRSTATUS notes in kdump ELF
    dumpfiles; if a CPU was offlined, this mapping is not identity
  o Enhance the "dev" command to show CDEV and GENDISK
  o Fix the OPERATIONS column of "dev"
  o Fix potential SEGV when running "foreach bt" on a live system
    with many processes starting and ending
  o Fix reading of LKCD Version 8 and later x86 dumpfile headers
  o Fix backtraces of non-crashing CPUs interupted during process
    switch (x86_64)
  o Fix backtrace when transitioning from the IRQ stack to the
    process stack on 2.6.29 and later (x86_64)
  o Enhance "runq" to show the current task in each CPU's runqueue
  o Fix a memory leak when running on live systems
  o Allow using vmlinux files with DWARF3 debuginfo
  o Allow any order of arguments with a System.map file
  o Add several new defensive mechanisms to prevent potential
    errors and SEGVs when using non-matching vmcore, System.map
    and vmcore files
  o Adjust several virtual and physical memory address definitions
    for 2.6.31 x86_64 kernels
  o Improve "kmem -s" or "kmem -S" options with CONFIG_SLUB when
    an invalid slab page link address is encountered

-------------------------------------------------------------------
Thu Jul  2 12:08:27 CEST 2009 - ptesarik@suse.cz

- Update to 4.0-8.10
  o Enhance directory search for "mod -S <directory>" so that
    it is now possible to use an alternate module/module-debuginfo
    directory tree, created with rpm2cpio in a non-root directory
  o NEW: "--mod" command-line option to override the default
    location of the module directory tree
  o NEW: snap.so extension to create a kdump or netdump dumpfile
    from a live system (x86, x86_64, ppc64, ia64 only)
  o Recognize cpu_*_mask symbols on 2.6.29
  o Handle the removal of x8664_pda from 2.6.30
  o Use "crashing_cpu" to determine a kdump x86_64 panic task
  o Add "./extensions" to the list of directories searched for the
    "extend" command. The order is now:
      1. the current working directory
      2. the directory specified in the CRASH_EXTENSIONS shell 
         environment variable
      3. /usr/lib64/crash/extensions (64-bit architectures)
      4. /usr/lib/crash/extensions
      5. ./extensions
  o Rebuild extensions when defs.h is modified
  o Add several function prototypes for the SIAL extension module
    to fix incompatible int size on 64-bit
  o Enhance the extension modules API with a set of functions to get
    the register set from an NT_PRSTATUS note if available
  o Fix a SEGV when the panic task cannot be determined from a ppc64
    kdump vmcore

-------------------------------------------------------------------
Mon Apr 27 15:35:31 CEST 2009 - ptesarik@suse.cz

- Update to 4.0-8.9
  o NEW: Add option "bt -g" to display the backtraces of all
    threads in a thread group
  o NEW: Support for kdump "split-dumpfile" format produced by
    "makedumpfile --split"
  o Fix for "kmem -i", "kmem -n" and "kmem -p" on x86_64
    CONFIG_SPARSEMEM and CONFIG_SPARSEMEM_EXTREME kernels that have
    MAX_PHYSMEM_BITS increased from 40 to 44
  o Allow multiple "--machdep option=value" command-line options
  o Produce a warning if "bt" is attempted on active, non-crashing,
    xen dom0 tasks using kdump dumpfiles
  o Fix for potentially empty "bt -t" output, and for "bt -T"
    potentially dumping the text return addresses in the hard or
    soft IRQ stacks instead of the process stack

-------------------------------------------------------------------
Mon Apr 21 12:34:08 CEST 2009 - ptesarik@suse.cz

- Update to 4.0-8.8
  o Add the CONFIG_STRICT_DEVMEM hint when reading /dev/mem fails
  o Fix segmentation violation in "bt" when reading certain x86_64
    Egenera/LKCD dumpfiles where the starting stack hooks
  o Fix the "log" command for cases when the log buffer was cleared
    with syslog() or klogctl()
  o Improve the error message displayed by "bt -S" when given
    a non-process stack address as an argument
  o Search directories for the "extend" command in this order:
      1. the current working directory
      2. the directory specified in the CRASH_EXTENSIONS shell
         environment variable
      3. /usr/lib64/crash/extensions (64-bit architectures)
      4. /usr/lib/crash/extensions
  o Improve how the "bt" command determines which PID 0 swapper
    task was interrupted by an ia64 INIT or MCA exception
  o Remove an unused initialized variable in get_task_mem_usage()
  o Add a debug-level 8 statement in readmem() to display the
    current input address and its translated physical address under
    the existing debug-level 4 "<readmem: ...>" line
- Delete crash-improve-find-extension.diff: Solved slightly
  differently in mainline.

-------------------------------------------------------------------
Sat Feb 07 18:43:55 CET 2009 - bwalle@suse.de

- Update to 4.0-7.7
  o Dynamic page size detection on PPC64 and IA64.
  o Fix for "mod -[sS]" command if the target module object
    filename contains both underscore and dash characters.
  o Reject s390 and s390x "L2^B" local label symbols from the
    kernel symbol list.
  o Enlarge the string format buffer in the show_last_run()
    function to prevent a buffer overflow when running "ps -l".
  o Fix for "bt -a" to continue with the backtraces of the
    remaining active tasks when one of them encounters a fatal
    error.
  o Only allow trusted versions of .crashrc and .gdbinit files to
    be sourced during session initialization.
  o Fix for a potential but highly unlikely buffer overflow in the
    gdb dwarfread.c and dwarf2read.c files, which requires a hand-
    crafted object file with a location block (DW_FORM_block) that
    contains a large number of operations.
  o Fix for a potential but highly unlikely integer overflow in the
    Binary File Descriptor (BFD) library, which requires a hand-
    crafted object file that that specifies a large number of
    section headers, leading to a heap-based buffer overflow.
  o Enable stack unwind on ia64 when using a kerntypes file as the
    kernel namelist.
  o Fix for failure of "files -R" command option if an inode is
    unknown due to a NULL f_dentry pointer in any open file
    structure because of a kernel error condition.
  o Allow an LKCD kerntypes debuginfo file created from a kernel
    module to be loaded with the command:
    "mod -s <module> <kerntypes-file>".
  o Increased NR_CPUS from 256 to 512 for x86_64, and from 128 to
    1024 for ppc64.
- Delete crash-fix_ps-l_buffer_overflow.patch: Mainline.
- Delete crash-pagesize.diff: Mainline.
- Delete crash-ppc64-nr_cpus.diff: Mainline.
- Delete crash-s390-System.map-limit.diff: Mainline.
- Delete crash-unwind-lkcd.diff: Mainline.

-------------------------------------------------------------------
Fri Jan 23 19:18:36 CET 2009 - bwalle@suse.de

- Don't build on 32 bit PPC to prevent distribution of 32 bit
  PPC packages. Since kdump doesn't exist on ppc and crash-ppc
  cannot read ppc64 (ELF64) dumps, such a package doesn't have
  any practical benefit.

-------------------------------------------------------------------
Fri Jan 23 17:21:28 CET 2009 - bwalle@suse.de

- Correctly unwind with LKCD kerntypes files.

-------------------------------------------------------------------
Thu Jan 15 18:28:00 CET 2009 - bwalle@suse.de

- Merge crash-segmentation-fault-fix.diff into
  crash-compressed-kernel.
- crash-pagesize.diff: Polish for mainline inclusion.
  o Remove the ia64 part that is responsible for dumps that
    are in ELF format and have no VMCOREINFO.
  o Only apply the code to ppc64 and ia64 since that's the only
    architectures that are affected.

-------------------------------------------------------------------
Thu Jan 15 16:15:39 CET 2009 - bwalle@suse.de

- Improve crash-s390-System.map-limit.diff: Don't increase the
  limit but filter out the unnecessary symbols.

-------------------------------------------------------------------
Wed Jan 14 19:11:31 CET 2009 - bwalle@suse.de

- Support dump page sizes that are different from the system page
  sizes on ppc and ia64.

-------------------------------------------------------------------
Mon Jan 12 10:32:00 CET 2009 - bwalle@suse.de

- Update to 4.0-7.6
  o Fix for initialization-time failure if the kernel was built
    without CONFIG_SWAP.
  o Fix for the "bt" command when run on x86_64 kernels that
    contain the  x86/x86_64 merger patch.
  o Fix for the usage of an input file of commands redirected
    during runtime via "<", where more than one command in the
    input file  results in a fatal error.
  o Clean up causes for warning messages when compiling with gcc
    4.3.2.
  o Fix to prevent a segmentation violation during initialization
    when parsing (corrupted) module symbols.
  o If an active task experiences a kernel stack overflow, the
    task's thread_info structure located at the very bottom of the
    stack will likely have its "cpu" field corrupted.
  o Modification of the the "files" command when a task has an open
    file referenced by a file descriptor, but the file structure's
    f_dentry  field is NULL.
  o Fix for the "bt" command on x86 Xen architectures when the
    backtrace starts on the hard IRQ stack.
- Drop crash-fixed-uninitialised: mainline.
- Refresh crash-compressed-kernel, crash-crosscrash-hint.diff,
  crash-fix_ps-l_buffer_overflow.patch,  crash-fixed-uninitialised,
  crash-improve-find-extension.diff, crash-sles9-time.patch,
  crash-s390-System.map-limit.diff.

-------------------------------------------------------------------
Thu Dec 11 17:36:14 CET 2008 - bwalle@suse.de

- Don't print error messages when locating the path of the
  extension, only print an error message if the extension cannot
  be found (bnc #457006).
- Refresh other patches.

-------------------------------------------------------------------
Thu Dec 11 13:28:01 CET 2008 - bwalle@suse.de

- Workaround for L2^B1 symbols that repeat more than 200 times
  in s390x System.map (bnc #456682).

-------------------------------------------------------------------
Mon Dec 08 11:46:10 CET 2008 - bwalle@suse.de

- Fix ps -l buffer overflow problem (bnc #457151).

-------------------------------------------------------------------
Mon Dec 08 11:22:45 CET 2008 - bwalle@suse.de

- Update to 4.0-7.5
  o Fix for "kmem -i" and "kmem -p" on 2.6.26 x86 CONFIG_SPARSEMEM
    PAE kernels to account for the change in value of
    SECTION_SIZE_BITS.
  o Fix for "bt -[tT]" options on x86 architectures when the
    backtrace starts on the hard IRQ stack.
  o Fix for the "bt" command when run on a xen hypervisor in which
    the backtrace leads to either "process_softirqs" or
    "page_fault".
  o Fix for the "kmem -[sS]" options that could cause a
    segmentation violation or bogus "bad slab pointer" and "bad
    inuse counter" error  messages.
  o Fix for a bug in the SIAL extension when dealing with
    bitfields.
  o Fix for the "files" command when run on 2.6.25 and later
    kernels,  which would either fail with an "invalid kernel
    virtual address" error of type "fill_dentry_cache", or would
    show nonsensical/garbage "ROOT" and "CWD" pathnames.
  o Addition of a new "null-stop" environment variable that can be
    turned on/off with the "set" command.
  o Fix for the builtin "g" alias, which would fail with an
    "Ambiguous command" error from the embedded gdb module.
  o Fix to handle the 2.6.27 kernel's change of the module
    structure's num_symtab, core_size and core_text_size members
    from long to int.
  o Implement support for the /dev/crash driver being built into
    x86 or x86_64 Red Hat kernels with the restricted /dev/mem
    driver.
  o If the /dev/crash driver module has been loaded prior to a live
    crash session, then it will not be unloaded when the crash
    session exits.
  o Fix to recognize the 2.6.25 re-naming of the x86
    user_regs_struct structure members.
  o Fix for initialization-time failure when running against 2.6.27
    x86_64 xen kernels, which indicate "crash: cannot resolve:
    end_pfn".
  o Fix for initialization-time failure when running against Xen
    4.4  hypervisor binaries, which indicate "crash: invalid
    structure member offset: domain_is_polling".
  o Added a new "p -u" option, which indicates that the gdb
    expression argument evaluates to a user virtual address in the
    current context.
  o Fix for "bt -a" command when running against the xen hypervisor
    where the number of physical cpus outnumber the MAX_VIRT_CPUS
    value for the processor type.
  o Fix for the display of the processor speed on IBM Power6
    hardware.
- Drop crash-sial-fix-bitfield.diff: Mainline.
- Drop crash-fix-files-2.6.25-later.diff: Mainline.
- Drop crash-struct-module-2.6.27.diff: Mainline.
- Drop crash-xen-no-polling.diff: Mainline.
- Drop crash-xen-vm-2.6.27.diff: Mainline.

-------------------------------------------------------------------
Thu Nov 27 13:52:19 CET 2008 - bwalle@suse.de

- Improve crash-xen-no-polling.diff: Check if "is_polling" member
  of struct domain exists instead of removing all references
  entirely.

-------------------------------------------------------------------
Wed Nov 26 18:28:49 CET 2008 - bwalle@suse.de

- Fix Xen hypervisor mode (removal of struct domain::is_polling
  element in Xen).
- Fix opening of Xen Dom0 dumps (switch from end_pfn to max_pfn
  between 2.6.26 and 2.6.27).

-------------------------------------------------------------------
Wed Nov 12 11:20:34 CET 2008 - bwalle@suse.de

- Increase NR_CPUs on x86_64 to 4096 (FATE#304266).

-------------------------------------------------------------------
Tue Nov 11 11:30:43 CET 2008 - bwalle@suse.de

- Don't fail to start when no namelist (kernel) is specified on the
  command line and live debugging (/dev/mem) is used.

-------------------------------------------------------------------
Mon Nov 10 15:07:38 CET 2008 - bwalle@suse.de

- Advise the user to use 'crosscrash' if he tries to open dumps
  from different machines (FATE #302896).

-------------------------------------------------------------------
Thu Nov 06 18:32:05 CET 2008 - bwalle@suse.de

- Increase NR_CPUS to 1024 on ppc64.
- Implement size changes of struct module for kernel 2.6.27.
  to be able to open dumps with that kernel version at ppc64.

-------------------------------------------------------------------
Thu Nov 06 10:46:07 CET 2008 - bwalle@suse.de

- Fix segmentation fault while executing crash command without any
  parameter (bnc#441818).

-------------------------------------------------------------------
Sat Oct 25 17:40:05 CEST 2008 - bwalle@suse.de

- Fix for the "files" command when run on 2.6.25 and later kernels,
  which either fails with an "invalid kernel virtual address" error
  of type "fill_dentry_cache", or shows nonsensical/garbage "ROOT"
  and "CWD" directory pathnames.

-------------------------------------------------------------------
Tue Oct 21 15:16:46 CEST 2008 - bwalle@suse.de

- SIAL extension: bitfield handling fixup.

-------------------------------------------------------------------
Thu Oct 16 17:05:51 CEST 2008 - bwalle@suse.de

- Require /usr/bin/nm.

-------------------------------------------------------------------
Tue Oct 14 17:34:56 CEST 2008 - bwalle@suse.de

- update to crash 4.0-7.4
  o Fix for a build regression for non-xen architectures introduced
    in  version 4.0-7.3.
- Remove crash-non-xen-build.diff: Mainline.

-------------------------------------------------------------------
Sat Oct 11 20:28:43 CEST 2008 - bwalle@suse.de

- Fix build on non-Xen architectures (s390/s390x and ppc64).

-------------------------------------------------------------------
Sat Oct 11 19:47:43 CEST 2008 - bwalle@suse.de

- update to crash 4.0-7.3
  - Fix for nonsensical usage of the "set" command when running
    against the xen hypervisor binary.
  - Fix for "bt" command on x86 architectures when the backtrace
    starts on the hard IRQ stack.
  - Fix for "search -k" option on some ia64 hardware, depending
    upon the underlying physical memory layout.
  - Fixes for the "bt" command when running against the xen
    hypervisor binary.
  - The "foreach" command has been removed from the set of commands
    supported for usage with the xen hypervisor.
  - Fix for "irq -d" option when run on x86_64 xen kernels.
  - Avoid the symbolic translation of ia64 unity-mapped region 7
    kernel virtual addresses as they are displayed by the "bt -r"
    and "rd -[sS]"  commands.
  - Remove redundant storage of "swapper_pg_dir" symbol value
    during x86 initialization.
  - Recognize the removal of the "jiffies" variable when running
    against newer versions of the xen hypervisor by indicating
    "--:--:--" next to the UPTIME display.
  - Fix to determine whether an x86 or x86_64 xen hypervisor was
    built with PERCPU_SHIFT value of 12 or 13.

-------------------------------------------------------------------
Mon Oct 06 18:10:45 CEST 2008 - bwalle@suse.de

- update to crash 4.0-7.2
  o Fix for initialization-time failure when running against 2.6.27
    x86_64 kernels, which indicate "crash: cannot resolve:
    end_pfn".
  o When an improper structure member offset or structure size is
    attempted, a partial crash backtrace is displayed in the
    ensuing error message.
  o Fix for LKCD kerntypes debuginfo files to use "node_states"
    when  "node_online_map" is not in use.
  o Implement support for s390/s390x CONFIG_SPARSEMEM kernels.
  o Fix for "kmem -[sS]" when running against 2.6.27 CONFIG_SLUB
    kernels, in which the kmem_cache.objects and .order members
    were replaced by  a kmem_cache_order_objects structure.
  o Increased the maximum number of SIAL commands from 100 to 200.
- Remove crash-config-sparse.diff: Mainline.
- Remove crash-config-sparse.diff: Mainline.

-------------------------------------------------------------------
Fri Sep 05 16:57:34 CEST 2008 - bwalle@suse.de

- Update crash-config-sparse.diff to match new upstream patch
  version that will be included in next upstream release
  (bnc#412894).

-------------------------------------------------------------------
Mon Aug 25 17:03:04 CEST 2008 - bwalle@suse.de

- call "/usr/bin/nm" without -D first, and if that fails, use "-D".

-------------------------------------------------------------------
Mon Aug 25 13:38:02 CEST 2008 - bwalle@suse.de

- update "/usr/bin/nm -d" instead of "/usr/bin/nm" to display the
  backtrace because that works even if crash has been compiled
  without debug information (without -g)

-------------------------------------------------------------------
Tue Aug 19 18:30:18 CEST 2008 - bwalle@suse.de

- update to crash 4.0-7.1
  o Fix to address RT kernel's renaming of the
    address_space.nrpages member to address_space.__nrpages
  o For crash utility debug backtraces displayed in error
    conditions, the usage of __builtin_return_address() has been
    replaced with the backtrace() function.
  o Fix for ia64 hypervisor backtraces when the entries in the cpu
    map are not contiguous.
  o Fix to make shell-escaped commands in a crash input file direct
    their output properly.
  o Fix to allow the usage of the "-i inputfile" command line
    option when operating from an init script.
  o Fix for the "kmem -P <address>" option, where <address> is an
    invalid physical address.
  o Fix for a potential endless cascade of SIGFPE exceptions during
    session initialization when a vmlinux and vmcore do not match,
    and a correct System.map or a non-debug vmlinux file is not
    supplied.
  o More gracefully handle a nonsensical "search -u <address>"
    command attempt on a kernel thread or any context with no user
    address space.
  o Reworked the "search" command for usage with the Xen
    Hypervisor.
  o Fix for initialization-time segmentation violation due to a
    module allocating and creating an exported symbol list outside
    of its own virtual address space, and then overwriting its own
    symbol list pointer.
  o Implementation of a "--minimal" command line option, which
    brings up a crash session that is restricted to the "log",
    "dis", "rd", "sym", "eval" and "exit" commands.
- drop crash-builtin-return-addr: mainline
- drop crash-rt-nrpages: mainline
- drop crash-minimal-debugging.diff: mainline

-------------------------------------------------------------------
Fri Aug 15 10:36:35 CEST 2008 - bwalle@suse.de

- minimal debugging support for corrupted dumps (FATE#304994)

-------------------------------------------------------------------
Thu Aug 14 17:04:24 CEST 2008 - bwalle@suse.de

- fix CONFIG_SPARSEMEM kernels on s390x (bnc#412894) [IBM patch]

-------------------------------------------------------------------
Wed May 14 22:59:37 CEST 2008 - bwalle@suse.de

- print the correct kernel image name in case automatic
  decompression is used

-------------------------------------------------------------------
Wed May 14 20:29:05 CEST 2008 - bwalle@suse.de

- use the patch that went upstream for the bnc#389907 fix below
  (http://article.gmane.org/gmane.linux.kernel.crash-dump.crash-utility/1148)

-------------------------------------------------------------------
Tue May 13 20:31:21 CEST 2008 - bwalle@suse.de

- Fix "crash" crashes on SLERT crashdump when running "kmem -i"
  (bnc#389907)
  o Use backtrace() instead of __builtin_return_address()
  o Use address_space.__nrpages for RT kernel

-------------------------------------------------------------------
Wed Apr 30 18:32:14 CEST 2008 - bwalle@suse.de

- update to crash 4.0-6.3
  o Support for Fedora FC9 kernels containing the
    linux-2.6.utrace.patch, which removes the task_struct.parent
    member.
  o Further scalability improvements to the "search -k" mechanisms.
  o Changed ppc64 manner of determining the number of cpus to first
    check the cpu_present_map
  o Fix/workaround for the ppc64 "bt" command on panic/active tasks
    when run against dumpfiles whose kernel had crashed with one or
    more cpus offline.
  o Added support for vtop translation of 1MB large pages available
    on new z10 (s390x) systems.
  o Prevent misleading init-time warning message for s390/s390x when
    verifying the vmlinux file with respect to the host machine type.
  o Minor documentation fix to crash.8 man page.
  o Support for running against an x86 xen-syms hypervisor binary
    based upon xen 3.1.2 or later.
  o Support for running against an x86_64 xen-syms hypervisor binary
    based upon xen 3.1.2 or later.

-------------------------------------------------------------------
Mon Mar 31 19:49:26 CEST 2008 - bwalle@suse.de

- update to crash 4.0-6.2
  o Implemented a new "rd -S" option which, like the "-s" option.
  o Make the found address displayed by "kmem -[sS] <address>" be
    the address of the containing object if the <address> argument
    is offset from the beginning of the object.
  o Fix for "kmem -[sS] [address]" in 2.6.25 CONFIG_SLUB kernels.
  o Fix for "kmem -[sS] <slab-address>" in 2.6.25 CONFIG_SLUB
    kernels.
  o Fix for an initialization-time failure with Ubuntu kernels
    because of a mismatch between the /proc/version string and the
    linux_banner string.
  o Fix for the "net" command in 2.6.22 and later kernels.
  o For kernels configured with CONFIG_SLUB, "kmem -S" has been
    updated to properly differentiate whether a cache's "full"
    slabs are tracked but whose full list is empty, or whether the
    full slabs are not tracked at all.
  o Fix for the "vm" command when the crash session was invoked with
    the -s command line option.
  o Fix/workaround for the "search -k" command option on relocatable
     2.6-era ia64 machines configured with CONFIG_SPARSEMEM.

-------------------------------------------------------------------
Wed Mar  5 10:10:01 CET 2008 - bwalle@suse.de

- crash-compressed-kernel: implement support for compressed kernel
  images (vmlinux.gz, not bzImage of course)

-------------------------------------------------------------------
Fri Feb 29 20:22:51 CET 2008 - bwalle@suse.de

- update to crash 4.0-6.1
  o Support for 2.6.25 x86_64 kernels
  o Fix for "bt" command when running on a live 2.6.25 x86 kernel
  o Fix for the "timer" command in 2.6.25 kernels.
  o Cosmetic change to the x86 "bt" command to recognize the entry
    point name change from "sysenter_entry" to
    "ia32_sysenter_target".

-------------------------------------------------------------------
Fri Feb 22 16:51:00 CET 2008 - bwalle@suse.de

- update to crash 4.0-5.1
  o Update "ps -l" to use task_struct.sched_info.last_arrival value
    on 2.6.23 and later kernels that don't have a
    task_struct.last_ran member.
  o Fix for potential initialization-time failure when running
    against 2.4-era x86 netdump dumpfiles
  o Fix to make the unused do_radix_tree() function work as
    advertised.
- update to crash 4.0-5.0
  o Fix for a potential segmentation violation during crash session
    initialization
  o Fix for the "bt" command when run on xen x86 dom0 dumpfiles
  o Initial support for OpenVZ kernels.

-------------------------------------------------------------------
Fri Feb  8 19:02:51 CET 2008 - bwalle@suse.de

- updated SIAL scripts to 2008-02-08
  o fix problem on kernel-smp/x86_64 with ps.c

-------------------------------------------------------------------
Wed Feb  6 16:35:55 CET 2008 - bwalle@suse.de

- updated SIAL scripts to 2008-02-06
- delete crash-sial-fix-files-script: upstream
- delete crash-sial-ps-non-smp: upstream
- delete crash-sial-scripts-fix-taskt_t: upstream

-------------------------------------------------------------------
Sat Feb  2 19:01:26 CET 2008 - bwalle@suse.de

- fix wrong access to .counter on non-SMP kernels in ps.c SIAL
  sample script (bnc#355982)

-------------------------------------------------------------------
Sat Jan 26 12:45:42 CET 2008 - bwalle@suse.de

- don't typedef task_t for kernels below 2.6.18 (bnc#355982)

-------------------------------------------------------------------
Fri Jan 11 20:55:10 CET 2008 - bwalle@suse.de

- update to crash 4.0-4.13
  o improve error message when trying to open a dump of another
    architecture/endianess
  o update for "kmem -V" option
  o Implemented a new "kmem -z" option to display per-zone memory
    statistics
  o Fix for the RSS amounts displayed by the "ps" and "vm" commands
    on 2.6 kernels prior to 2.6.13.
  o Fix for the x86 "bt" command when running a version of crash
    built on a pre-2.6.20 host against a 2.6.20 or later dumpfile,
    or when running a version of crash build on a 2.6.20 or later
    host against a pre-2.6.20 dumpfile
  o Fix for FC8 xen x86 kernels (2.6.21-2952.fc8xen)
  o Set a default "phys_base" value for recent fully-virtualized
    relocatable x86_64 kernels whose text start address is not
    equal to the __START_KERNEL_map value.
  o Debug: implemented a new "--active" crash command line option
  o Debug: "help -n" formats and displays ASCII VMCOREINFO data
- removed crash-search-also-in-lib-crash (fixed mainline)

-------------------------------------------------------------------
Wed Jan  9 16:25:50 CET 2008 - bwalle@suse.de

- fix different initialisation of jiffies on SLES9 (352836)

-------------------------------------------------------------------
Fri Dec 21 12:14:58 CET 2007 - bwalle@suse.de

- improve error handling when target architecture doesn't match
  host architecture (345517)

-------------------------------------------------------------------
Sun Dec 16 13:20:32 CET 2007 - bwalle@suse.de

- split crash_whitepaper into crash-doc subpackage

-------------------------------------------------------------------
Wed Dec 12 22:43:18 CET 2007 - bwalle@suse.de

- update to crash 4.0-4.12
  o Fix "kmem -n" command to handle the 2.6.24 kernel changes
  o Fix for "kmem -p" on 2.6.24 x86_64 kernels that are configured
    with CONFIG_SPARSEMEM_VMEMMAP
  o Fix for "dev" command's character device name string output to
    recognize the change of the name structure member from a
    pointer to an embedded string.
  o Fix for the "kmem -[sS]" command to handle the 2.6.24 change
    to the CONFIG_SLUB kmem_cache structure
  o Fix for "kmem -[fF]" command to handle the 2.6.24 kernel change
    of the free_area struct
  o Fix for the "runq" command to handle the 2.6.24 kernel change
    to the CFS scheduler

-------------------------------------------------------------------
Thu Dec  6 17:16:06 CET 2007 - bwalle@suse.de

- update to crash 4.0-4.11
  o Fix for task-gathering to handle the 2.6.24 pid_namespace-
    related changes to the kernel pid_hash array.
  o Fix for "kmem -f <address>" and "kmem <address>" commands on
    x86 kernels, which may incorrectly indicate that the address is
    in the kernel's free page list.
  o Fix for x86 "bt" command for active tasks in Egenera dumpfiles
    based upon LKCD version 7.
  o Fix for a potential segmentation violation during crash session
    initialization if a task's kernel stack has been completely
    overrun
  o Fix for "kmem -S" error message if a slab object is found in
    both a per-cpu list and on a slab's global free list.

-------------------------------------------------------------------
Fri Nov 30 14:56:34 CET 2007 - bwalle@suse.de

- fixed file.c SIAL script for linux 2.6.22 and later
- removed spu.c from SIAL package since this was not a SIAL script
  but an extension module

-------------------------------------------------------------------
Mon Nov 26 15:27:01 CET 2007 - bwalle@suse.de

- update to crash 4.0-4.10
  o Fix a regression introduced in 4.0-4.9 that causes the
    "kmem -p" command to fail in SPARSEMEM kernels that that have
    the struct page.index member embedded in an anonymous union

-------------------------------------------------------------------
Wed Nov 21 10:07:38 CET 2007 - bwalle@suse.de

- dropped crash-lkcd-use-kernel-start-address.patch,
  crash-fixed-uninitialised-mainline, crash-fix-sial-warnings,
  crash-fix-echo-extension: merged mainline
- update to crash 4.0-4.9
  o Fix for the "kmem -p" command in kernels configured with
    CONFIG_SPARSEMEM
  o Fix for the "kmem -p" command output of MAPPING and INDEX
    values on kernels where the mapping and index members of the
    page structure are contained within anonymous unions.
  o Fix for the "mod" command to search for module object files in
    the /lib/modules/<release>/updates directory tree before
    looking in /lib/modules/<release>.
  o Fix for the "waitq" command for 2.6.15-era and later kernels
  o SIAL interpreter fix for an "operation on 'v1' may be
    undefined" warning
  o Fix for several unpredictable failure modes when attempting
    "crash -h [command] > outputfile" from a shell command line.
  o Addressed several compiler warnings
  o Fix for "kmem -p" on i386 CONFIG_SPARSEMEM kernels with greater
    than 4GB of memory
  o Fix to redirect SIAL script command output to pipes, files,
    etc., in the same manner as native crash commands.
  o Fix for ppc64 kernels with 64K pages whose PTE_RPN_SHIFT has
    changed from 32 to 30.
  o Fix for "kmem -s" if a slab cache whose name string cannot be
    read is encountered.
  o Fix for x86-64 SPARSEMEM kernels with CONFIG_NUMA off.
  o Fix to use the ia64 physical start address from the LKCD dump
    header instead of the default value.
  o For s390[x] kernels the page table allocation method will be
    changed such that instead of 3 levels, it will be now possible
    to allocate 4 levels.
  o Fix for LKCD dumpfile access failures that abort() the crash
    session after displaying an error message indicating a problem
    with physical memory zones in the dumpfile.

-------------------------------------------------------------------
Fri Nov  9 23:39:07 CET 2007 - bwalle@suse.de

- load extension modules also when the ".so" suffix is not provided

-------------------------------------------------------------------
Fri Nov  9 22:43:58 CET 2007 - bwalle@suse.de

- fix compile warnings in the echo (sample) extension

-------------------------------------------------------------------
Fri Nov  9 20:01:31 CET 2007 - bwalle@suse.de

- build all files with RPM_OPT_FLAGS
- fix compiler warnings

-------------------------------------------------------------------
Tue Oct 30 21:52:19 CET 2007 - bwalle@suse.de

- update to crash 4.0-4.8
  o support for kernels configured with CONFIG_SLUB
  o SIAL interpreter extension module has been updated to support
    the ia64, ppc64, s390 and s390x architectures.
  o Fixed a bug in the CONFIG_SPARSEMEM patch
  o Fixed the "mach" command in CONFIG_SLUB kernels
  o Fix for missing NODE header
  o Fix for the chronology of the contents of the kernel message
    buffer output by the "log" command.
  o Display a WARNING message if a PT_LOAD segment in an ELF-style
    dumpfile advertises a memory segment that would go beyond the
    end of the dumpfile.
- set maximum number of CPUs to 4096 to sync with upstream
  (dropping crash-ia64-increase-nr-cpu)
- crash-fetch-registers-from-lkcd.patch, crash-check-filesize,
  crash-sial-fix-ia64: dropped (now mainline)

-------------------------------------------------------------------
Tue Oct 30 14:32:05 CET 2007 - bwalle@suse.de

- crash-fix-other-lkcd-versions: fix for
  crash-fetch-registers-from-lkcd.patch for older LKCD versions

-------------------------------------------------------------------
Sat Oct 27 10:39:01 CEST 2007 - bwalle@suse.de

- move sial.so to /usr/lib{,64} (because of shared library policy)
- add /usr/lib{,64} to the search path for the "extend" command

-------------------------------------------------------------------
Mon Oct 22 15:54:00 CEST 2007 - bwalle@suse.de

- fix warnings in crash-lkcd-use-kernel-start-address.patch,
  crash-ia64-increase-nr-cpu, crash-fetch-registers-from-lkcd.patch
  (found by "make warn")

-------------------------------------------------------------------
Thu Oct 18 19:03:19 CEST 2007 - bwalle@suse.de

- increase NR_CPUS to 16384 (BZ #334609, FATE #302671)

-------------------------------------------------------------------
Wed Sep 26 15:36:26 CEST 2007 - bwalle@suse.de

- fix SIAL build on ia64
- build SIAL extension only on i386, x86_64 and ia64

-------------------------------------------------------------------
Tue Sep 25 22:14:19 CEST 2007 - bwalle@suse.de

- update to crash 4.0-4.7
  o Incorporation of Luc Chouinard's SIAL interpreter
  o Removed hardwired-dependencies in the top-level and extensions
    subdirectory Makefiles for building extension modules
  o When a 32-bit x86 xenU guest is run on an x86_64 dom0 host, the
    new-style xen ELF format dumpfile contains an ELF header with
    an e_machine type of EM_X86_64 (instead of EM_386)
  o Enhanced the "kmem <address>" option
  o Fix for determining starting rip/rsp backtrace hooks for the
    panic task in x86_64 xen dom0 kdumps
  o Fix for ia64 LKCD dumpfiles
  o Fix for potential "mod -[sS]" failures
  o Fix to prevent dumpfile reads beyond EOF when reading new
    (optimized) xen ELF core xendumps.
  o Fix in x86_xen_kdump_p2m_create() when debug level was equal
    to or larger than 7
- added sial subpackage for the SIAL extension

-------------------------------------------------------------------
Tue Sep 25 15:51:12 CEST 2007 - bwalle@suse.de

- crash-check-filesize: Added patch that checks the size of the
  vmcore file and prints a clear error message (#326558)

-------------------------------------------------------------------
Tue Sep 25 15:20:13 CEST 2007 - bwalle@suse.de

- crash-fetch-registers-from-lkcd.patch: remove debugging output

-------------------------------------------------------------------
Mon Sep  3 16:43:16 CEST 2007 - bwalle@suse.de

- fetch LKCD registers for ESP/EIP instead of guessing on the
  stack (#266841)
- crash-sles9-quirk.patch: rewrite based on the previous patch

-------------------------------------------------------------------
Thu Aug 30 12:49:20 CEST 2007 - bwalle@suse.de

- don't use a macro for the version tag, instead get the major and
  minor version for the tarball from the version tag itself

-------------------------------------------------------------------
Mon Aug 27 21:39:41 CEST 2007 - bwalle@suse.de

- update to crash 4.0-4.6
  o Implemented the "runq" command for 2.6.20 and later kernels
    that have replaced the O(1) scheduler with the CFS scheduler.
  o kerntypes support: added a new "-k" command line option that
    allows the usage of standard -g compiled LKCD Kerntypes files.
  o Update of "xencrash" support to properly handle dom0/hypervisor
    kdumps taken under xen version 3.1 in addition to those taken
    under xen 3.0.x.

-------------------------------------------------------------------
Fri Jul 27 22:51:41 CEST 2007 - bwalle@suse.de

- update to crash 4.0-4.5
  o Addresses FC7/upstream x86 kernels that have been configured
    such that the vmlinux symbol values do not match their
    relocated values when loaded.
  o Fix for x86 2.6.22 kernel initialization-time failure
    indicating: "crash: invalid size request: 0  type:
    __per_cpu_offset"
  o Fix to recognize the 2.6.22 kernel's replacement of kmalloc
    slab subsystem
  o fix for the LKCD kerntypes support which addresses error during
    during initialization on 2.6.22 kernels: "WARNING: cannot
    determine pgdat list for this kernel/architecture".

-------------------------------------------------------------------
Sat Jul 21 11:13:05 CEST 2007 - bwalle@suse.de

- update to crash-4.0-4.4
  o Fix for kernels in which the irq_desc_t typedef is not included
    in the vmlinux debuginfo data,
  o Implemented new "irq -u" option that displays only in-use IRQs
  o Prevent occasional 99% cpu usage waiting for the built-in less
  o Implemented support for the use of "kerntypes" debuginfo files
  o Fixes, code improvement and cleanup for "crash -h [command]"
  o New CRASHPAGER environment variable to set the pager.
  o Updated crash(8) man page.

-------------------------------------------------------------------
Thu Jul  5 18:54:11 CEST 2007 - bwalle@suse.de

- use the load address of the kernel from the LKCD header on
  IA64 instead of the default (#282475)

-------------------------------------------------------------------
Fri Jun 22 22:06:07 CEST 2007 - bwalle@suse.de

- update to crash 4.0-4.3
  o Fix for "kmem -f" command on 2.6.17 and later
    CONFIG_DISCONTIGMEM kernels
  o Fix for segmentation violation when using the wrong vmlinux
    file command line argument on a live system on either the
    x86_64 or ia64 architectures.
  o For all 4 types of input-file processing If a command in the
    input file encounters a FATAL error, the remainder of the
    commands will be executed.

-------------------------------------------------------------------
Mon Jun  4 22:10:46 CEST 2007 - bwalle@suse.de

- update to crash 4.0-4.2
  o Fix for support of 2.6.22 kernels
  o Fix to account for the number of pgdata nodes being less than
    the number of cpus.
  o Implemented support for ia64 dom0/HV kdump dumpfile support
  o Created a "--no_panic" command line option
  o Implmented a new "ps -r" option
  o Implement support for the registration of CLEANUP extension
    commands
  o Implemented a new symbol_value_module() primitive
- Split into main package and devel package. The devel package
  contains the defs.h file that is required to build extensions
  for crash.

-------------------------------------------------------------------
Fri Apr 27 18:31:19 CEST 2007 - bwalle@suse.de

- update to crash 4.0-4.1
  o Implemented dependable backtraces for the x86_64 architecture.
  o Fix for s390 and s390x backtrace commands to recognize the kernel
    structure name change from "runqueue" to "rq".
  o Merged fourth round of "xencrash" patches

-------------------------------------------------------------------
Wed Apr 11 00:15:55 CEST 2007 - bwalle@suse.de

- update to crash 4.0-3.22
  o support for 2.6.20 "__bug_table"
  o Fix for the x86 backtrace code to recognize the encoded
    filename and line number information
  o Added preparations for an upcoming version update to kdump's
    associated makedumpfile utility
  o Implemented "help -n" debug output function for compressed
    diskdump and compressed kdump dumpfiles.
  o improved output for "help -n" if dump_level exists
  o Support for xendumps of fully-virtualized x86_64 relocatable
    kernels.
  o Fix for 4.0-3.21 "BOOKE" ppc.c patch

-------------------------------------------------------------------
Thu Mar 29 10:11:42 CEST 2007 - bwalle@suse.de

- added ncurses-devel to BuildRequires to provide termcap
- added zlib-devel to BuildRequires

-------------------------------------------------------------------
Mon Mar 19 11:20:43 CET 2007 - bwalle@suse.de

- update to crash 4.0-3.21
  o Introduced support for upstream xensource ELF format dumpfiles
  o "xencrash" fixes
  o Fix for "vtop" on x86 PAE kernels
  o Fix for "vm -p" or "vtop" on 2.6 x86 PAE kernels
  o Fix for "vm -p" on x86_64 kernels
  o In current 2.6 kernels, it is now possible to recognize ppc
    BOOKE processors
  o Fix for live system analysis of Ubuntu kernels
  o Fix for 2.6.21 kernels that fail during initialization with the
    message: "crash: invalid (optional) structure member offsets:

-------------------------------------------------------------------
Wed Feb 21 23:32:08 CET 2007 - bwalle@suse.de

- update to crash 4.0-3.19
  o merged third round of "xencrash" patches
  o verified support of live system analysis of ia64 xen kernels
  o added gdb's "shell" command to the prohibited gdb command list
  o fix for the x86 "bt" command for the 2.6.20 kernel
  o fix for the "mount" command for the 2.6.20 kernel
  o fix for the "files" command for the 2.6.20 kernel
  o fix for the "net -[sS]" command options for the 2.6.20 kernel
  o fix for the "vm" command for the 2.6.20 kernel
  o fix for the "swap" command for the 2.6.20 kernel

-------------------------------------------------------------------
Wed Feb  7 21:07:14 CET 2007 - bwalle@suse.de

- update to crash 4.0-3.19
  o Fix for support of paravirtual x86 xendumps under special
    circumstances
  o Fix for the "kmem -p [page-struct-address]" command construct
  o Added a new "struct -u" option
  o Added new "rd -f" and "struct -f" options
  o Cosmetic fix to prevent double-printing of "kmem -p" and
    "kmem -v" headers

-------------------------------------------------------------------
Fri Feb  2 01:12:23 CET 2007 - bwalle@suse.de

- update to crash 4.0-3.18
  o enhancement to the "mod" command to expand the number of
    section arguments to the internal "add-symbol-file"
  o speed up the initialization of crash sessions when running
    against multi-gigabyte xen kernels
  o Fix for a segmentation violation
  o Cosmetic fix to prepend newlines
  o Addressed several compiler warnings
  o Fix for the s390x "bt -f" command option

-------------------------------------------------------------------
Tue Jan 30 16:28:25 CET 2007 - bwalle@suse.de

- added documentation from webpage ("Crash Whitepaper")
- added README.SUSE
- disabled s390 patch because it's unnecessary (structure is
  exported by kernel headers)

-------------------------------------------------------------------
Tue Jan 30 01:17:02 CET 2007 - bwalle@suse.de

- make Emacs the default editing mode

-------------------------------------------------------------------
Wed Jan 17 11:43:39 CET 2007 - bwalle@suse.de

- fixed compile warnings that results in ERROR in autobuild

-------------------------------------------------------------------
Tue Jan 16 20:35:16 CET 2007 - bwalle@suse.de

- added RPM_OPT_FLAGS
- fixed some compile warnings

-------------------------------------------------------------------
Mon Jan 15 11:09:40 CET 2007 - bwalle@suse.de

- update to crash 4.0-3.17
  o fixes for "dev -p" command option
  o fix to recognize "linux_banner" symbol type change in
    2.6.20-rc2 kernels
  o fix to recognize "__per_cpu_start" and "__per_cpu_end" symbol
    in relocatable kernels
  o fix for the xencrash "dumpinfo -t" command
  o fix for x86_64 backtraces that may end prematurely
  o fix for a possible empty panic message in 2.6 kernels
- added patch that fixes the problem on IA64 that the CONFIG_NR_CPU
  must be the same in crash and in the kernel which created the dump
  when reading lkcd dump files (related to #208972)

-------------------------------------------------------------------
Fri Dec 22 11:53:49 CET 2006 - bwalle@suse.de

- update to crash 4.0-3.16
  o Recognize new XC_CORE_MAGIC_HVM xendump magic number
  o Recognize an INVALID_MFN marker in the indexed mfn list of a
    xendump

-------------------------------------------------------------------
Wed Dec 20 16:50:46 CET 2006 - bwalle@suse.de

- update to crash 4.0-3.15
  o Introduced support for xendumps
  o Additional support for the current kexec/kdump patch for Xen
  o Turn off the LKCD dumpfile-access
  o Update to MODULES_IN_CWD code segment
  o Support LKCD "map" files in lieu of standard System.map
  o The ia64 PR_UNALIGN_NOPRINT and PR_FPEMU_NOPRINT prctl commands
    have been moved earlier in time, in order to prevent "unaligned
    access" messages when accessing ELF header contents.
  o The dlopen() call used by the "extensions" facility has been
    changed to use the RTLD_GLOBAL flag
    messages when accessing ELF header contents.
  o The dlopen() call used by the "extensions" facility has been
    changed to use the RTLD_GLOBAL flag

-------------------------------------------------------------------
Fri Dec  8 17:03:15 CET 2006 - olh@suse.de

- update to crash 4.0-3.14
  handle pseudo task on ia64 after INIT or MCA
  handle per_cpu_* variables
  more x86_64 dwarf CFI changes
  recognizes memory holes in the sys command
  merge some xencrash changes

-------------------------------------------------------------------
Fri Nov  3 10:54:05 CET 2006 - olh@suse.de

- update to crash 4.0-3.9
  fix x86_64 irq stack handling
  fix ia64 DISCONTIGMEM handling
  more struct command updates

-------------------------------------------------------------------
Mon Oct 23 13:41:28 CEST 2006 - olh@suse.de

- update to crash 4.0-3.8
  fix irq command for post 2.6.17 kernels
  optionally use dwarf unwind data on x86_64
  fix struct -o command when member is a function pointer

-------------------------------------------------------------------
Fri Oct 13 12:48:48 CEST 2006 - olh@suse.de

- update to crash 4.0-3.7
  fix accessing user space stack addresses in ia64 kernels
  Implemented a new "sig -g" option
  allow the entry of multiple "list -s struct.member" arguments

-------------------------------------------------------------------
Mon Oct  2 21:26:32 CEST 2006 - olh@suse.de

- update to crash 4.0-3.5
  new ps -e and ps -g command, timer command fix

-------------------------------------------------------------------
Tue Sep 19 21:44:38 CEST 2006 - olh@suse.de

- update to crash 4.0-3.4
  support for x86_64 and ia64 compressed kdump dumpfiles
  fix "timer" command on 2.6.17 and later kernels
  more ia64 and sig command fixes

-------------------------------------------------------------------
Fri Sep  8 15:38:13 CEST 2006 - olh@suse.de

- update to crash 4.0-3.3
  kmem and sig cmd updates
  support for relocatable x86_64 kernels
  many other fixes

-------------------------------------------------------------------
Fri Aug 18 21:06:42 CEST 2006 - olh@suse.de

- update to crash 4.0-3.1
  4-level pagetable support for ia64
  new "--cpus " cmdline option
  read HZ and NR_CPUS from in-kernel CONFIG_IKCONFIG

-------------------------------------------------------------------
Thu Jul 20 18:27:42 CEST 2006 - olh@suse.de

- update to crash 4.0-2.33
  handle runqueue struct change in 2.6.18
  (192053 - LTC25200;189227 - LTC24353)

-------------------------------------------------------------------
Thu Jun  1 18:29:55 CEST 2006 - tiwai@suse.de

- Add a warning message when /proc/version doesn't match
  (#169708)
- Don't remove build-root at install

-------------------------------------------------------------------
Tue Apr 18 03:31:09 CEST 2006 - mason@suse.de

- Update to crash 4.0-2.23
  Fix kmem -s (bug 159651)
  More xen support

-------------------------------------------------------------------
Mon Mar 27 15:03:13 CEST 2006 - olh@suse.de

- Update to crash 4.0-2.22
  some xen support

-------------------------------------------------------------------
Wed Mar 22 13:42:02 CET 2006 - olh@suse.de

- update sparsemem patch for all archs

-------------------------------------------------------------------
Tue Mar 21 09:05:50 CET 2006 - olh@suse.de

- apply sparsemem patch only on ppc64 for the time being

-------------------------------------------------------------------
Mon Mar 20 08:53:28 CET 2006 - olh@suse.de

- add sparsemem support (149714 - LTC21350)

-------------------------------------------------------------------
Mon Mar 13 14:05:44 CET 2006 - olh@suse.de

- more ppc64, handle NR_CPUS mismatch

-------------------------------------------------------------------
Sun Mar 12 21:38:20 CET 2006 - olh@suse.de

- more ppc64, handle poisoned per_cpu data

-------------------------------------------------------------------
Wed Mar  1 13:30:31 CET 2006 - olh@suse.de

- more ppc64, but still not there
  build as non-root, build faster

-------------------------------------------------------------------
Wed Mar  1 00:01:48 CET 2006 - olh@suse.de

- some ppc64 updates (149714 - LTC21350)

-------------------------------------------------------------------
Sat Feb 11 20:11:47 CET 2006 - mason@suse.de

- Update to crash 4.0-2.20 (better fix for x86-64 cpu pda structs)

-------------------------------------------------------------------
Mon Jan 30 23:38:36 CET 2006 - mls@suse.de

- converted neededforbuild to BuildRequires

-------------------------------------------------------------------
Mon Jan 30 22:05:58 CET 2006 - mason@suse.de

- Update for new x86-64 cpu pda structs

-------------------------------------------------------------------
Mon Jan 16 21:20:12 CET 2006 - mason@suse.de

- Fix %setup

-------------------------------------------------------------------
Mon Jan 16 14:22:09 CET 2006 - kukuk@suse.de

- Fix %setup

-------------------------------------------------------------------
Mon Jan  9 15:46:07 CET 2006 - mason@suse.de

- fix build errors on s390

-------------------------------------------------------------------
Mon Jan  9 02:47:56 CET 2006 - mason@suse.de

- update va_server.c to build on ia64

Places

File crash.changes of Package crash

Places