Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
openSUSE:12.2
mipv6d
mipv6d.init
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File mipv6d.init of Package mipv6d
#!/bin/sh # # Copyright (c) 2011 SUSE LINUX Products GmbH, Nuernberg, Germany. # # This program is free software; you can redistribute it and/or modify it under # the terms of the GNU General Public License as published by the Free Software # Foundation; either version 2 of the License, or (at your option) any later # version. # # This program is distributed in the hope that it will be useful, but WITHOUT # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS # FOR A PARTICULAR PURPOSE. See the GNU General Public License for more # details. # # You should have received a copy of the GNU General Public License along with # this program; if not, write to the Free Software Foundation, Inc., 59 Temple # Place, Suite 330, Boston, MA 02111-1307 USA # # Author: Marius Tomaschewski <mt@suse.de> # Based on /etc/init.d/skeleton template by Kurt Garloff. # # /etc/init.d/mip6d # /usr/sbin/rcmip6d # ### BEGIN INIT INFO # Provides: mip6d # Required-Start: $syslog $remote_fs # Should-Start: $time # Required-Stop: $syslog $remote_fs # Should-Stop: $null # Default-Start: 3 5 # Default-Stop: 0 1 2 6 # Short-Description: MIPL - Mobile IPv6 for Linux Daemon # Description: Start Mobile IPv6 for Linux Daemon ### END INIT INFO # Shell functions sourced from /etc/rc.status: # rc_check check and set local and overall rc status # rc_status check and set local and overall rc status # rc_status -v be verbose in local rc status and clear it afterwards # rc_status -v -r ditto and clear both the local and overall rc status # rc_status -s display "skipped" and exit with status 3 # rc_status -u display "unused" and exit with status 3 # rc_failed set local and overall rc status to failed # rc_failed <num> set local and overall rc status to <num> # rc_reset clear both the local and overall rc status # rc_exit exit appropriate to overall rc status # rc_active checks whether a service is activated by symlinks . /etc/rc.status # Reset status of this service rc_reset # Return values acc. to LSB for all commands but status: # 0 - success # 1 - generic or unspecified error # 2 - invalid or excess argument(s) # 3 - unimplemented feature (e.g. "reload") # 4 - user had insufficient privileges # 5 - program is not installed # 6 - program is not configured # 7 - program is not running # 8--199 - reserved (8--99 LSB, 100--149 distrib, 150--199 appl) # # Note that starting an already running service, stopping # or restarting a not-running service as well as the restart # with force-reload (in case signaling is not supported) are # considered a success. # Check for missing binaries (stale symlinks should not happen) # Note: Special treatment of stop for LSB conformance mip6d_BIN=/usr/sbin/mip6d if test ! -x "$mip6d_BIN" ; then case $1 in stop) ;; *) echo -n >&2 "$0: \"$mip6d_BIN\" is not an executable file. Exiting." case $1 in status) rc_failed 4 ;; *) rc_failed 5 ;; esac rc_status -v ;; esac rc_exit fi # Check for existence of needed config file mip6d_CONF=/etc/mip6d.conf if test ! -s "$mip6d_CONF" ; then case $1 in stop|status) # let kill/checkproc report ;; *) echo -n >&2 "$0: \"$mip6d_CONF\" config file missed. Exiting." rc_failed 6 rc_status -v rc_exit ;; esac fi case "$1" in start) echo -n "Starting Mobile IPv6 Daemon (mip6d) " ## Start daemon with startproc(8). If this fails ## the return value is set appropriately by startproc. /sbin/startproc $mip6d_BIN # Remember status and be verbose rc_status -v ;; stop) echo -n "Shutting down Mobile IPv6 Daemon (mip6d) " ## Stop daemon with killproc(8) and if this fails ## killproc sets the return value according to LSB. /sbin/killproc $mip6d_BIN # Remember status and be verbose rc_status -v ;; try-restart|condrestart) ## Do a restart only if the service was active before. ## Note: try-restart is now part of LSB (as of 1.9). ## RH has a similar command named condrestart. if test "$1" = "condrestart"; then echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}" fi $0 status if test $? = 0; then $0 restart else rc_reset # Not running is not a failure. fi # Remember status and be quiet rc_status ;; restart) ## Stop the service and regardless of whether it was ## running or not, start it again. $0 stop $0 start # Remember status and be quiet rc_status ;; force-reload) ## Signal the daemon to reload its config. Most daemons ## do this on signal 1 (SIGHUP). ## If it does not support it, restart the service if it ## is running. echo -n "Reload Mobile IPv6 Daemon (mip6d) " ## if it supports it: #/sbin/killproc -HUP $mip6d_BIN #touch $mip6d_PID #rc_status -v ## Otherwise: $0 try-restart rc_status ;; reload) ## Like force-reload, but if daemon does not support ## signaling, do nothing (!) # If it supports signaling: #echo -n "Reload service mip6d " #/sbin/killproc -HUP $mip6d_BIN #touch $mip6d_PID #rc_status -v ## Otherwise if it does not support reload: # # => the reload (HUP) handler in mip6d seems to do nothing. # echo -n "Reload Mobile IPv6 Daemon (mip6d) " rc_failed 3 rc_status -v ;; status) echo -n "Checking for Mobile IPv6 Daemon (mip6d) " ## Check status with checkproc(8), if process is running ## checkproc will return with exit status 0. # Return value is slightly different for the status command: # 0 - service up and running # 1 - service dead, but /var/run/ pid file exists # 2 - service dead, but /var/lock/ lock file exists # 3 - service not running (unused) # 4 - service status unknown :-( # 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.) # NOTE: checkproc returns LSB compliant status values. /sbin/checkproc $mip6d_BIN # NOTE: rc_status knows that we called this init script with # "status" option and adapts its messages accordingly. rc_status -v ;; probe) ## Optional: Probe for the necessity of a reload, print out the ## argument to this init script which is required for a reload. ## Note: probe is not (yet) part of LSB (as of 1.9) # # => mip6d does not write any pid file # #test $mip6d_CONF -nt $mip6d_PID && \ echo restart ;; *) echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}" exit 1 ;; esac rc_exit
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor