Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
openSUSE:12.2
squid
squid_ie_blocker.txt
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File squid_ie_blocker.txt of Package squid
****** Using Squid to block Internet Explorer ****** After one of the many, many, many security holes in Microsoft Internet Explorer, my company decided to completely block outgoing requests for IE (at least, until a patch is published by MS). For this purpose, we changed our proxy setup to be transparent and block the browser based on its user-agent string. As an alternative, we decided to offer the Mozilla_Firefox browser to our users. You can read more about this on my Firefox_page. Our router was a Cisco 2600, and we chose to use WCCP for transparent proxying. You can read the router-side configuration at this_page or at this_page. I'm no cisco expert, so I won't go into details here. If you don't have a cisco, but a linux router, you can also easily do transparent proxying. There are many howtos for that. Squid configuration ------------------- The linux configuration of squid will be covered here, however, because it seems to be a bit outdated on both pages. I'm using SuSE 9.0 and use the SuSE kernel, which makes updating easier and saves a lot of configuration time :) The kernel config (if you need your own kernel) should be sufficiently described on the other pages I mentioned above. The squid configuration is fairly easy. The following is from my squid config (without comments), some of the values are defaults, important ones are marked in red. useragent_log /var/log/squid/useragent.log # log browser id referer_log /var/log/squid/referer.log acl intranet src 172.16.0.0/255.255.0.0 # intranet machines acl all src 0.0.0.0/0.0.0.0 acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 acl to_localhost dst 127.0.0.0/8 acl SSL_ports port 443 563 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 563 # https, snews acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT acl ie_browser browser ^Mozilla/4\.0.*compatible;.MSIE # die!! acl bad_browser browser ^Gator # Gator is also crap! acl windowsupdate dstdomain .windowsupdate.com # sometimes you have to live with the evil ... acl windowsupdate dstdomain .windowsupdate.microsoft.com acl ie_exceptions dstdomain .mycompany.at # for those who don't turn off proxy for intranet ... acl ie_exceptions2 dst 172.16.0.0/255.255.0.0 http_access deny bad_browser http_access allow windowsupdate http_access allow ie_exceptions http_access allow ie_exceptions2 http_access deny ie_browser http_access allow manager localhost http_access deny manager http_access deny !Safe_ports http_access deny CONNECT !SSL_ports http_access deny to_localhost http_access allow localhost http_access allow intranet http_access deny all http_reply_access allow all icp_access allow all cache_mgr hostmaster@mycompany.at httpd_accel_port 80 httpd_accel_host virtual httpd_accel_with_proxy on httpd_accel_uses_host_header on append_domain .mycompany.at deny_info ERR_IEBROWSER ie_browser wccp_router 172.16.0.1 ie_refresh on The most important settings are the acls to describe the IE browser and the according http_access deny rule. After monitoring the user_agent log at my site, I also noticed Gator on a machine. Gator is spyware (probably auto-executed by some IE bug?) and has surely no right to go into the Internet ... The deny_info is the page that is shown to users that use the IE browser. Put a file named ERR_IEBROWSER into /usr/share/squid/errors/English, that contains some useful text (e.g. where to get the firefox browser inside your LAN). After configuring your squid (I use 2.5.STABLE3), you can enter the proxy in your IE and it should not allow you to surf to any sites except the windowsupdate site and files that end with "mycompany.at". Transparent proxy with Cisco WCCP -------------------------------- The next thing now to do is to get the ip_wccp module. I downloaded it from the squid-homepage. Before compiling it, you must configure your kernel properly. Install the appropriate kernel-source package for your distro and do the following: cd /usr/src/linux make cloneconfig make dep Then compile the ip_wccp module using the following command: gcc -D__KERNEL__ -I/lib/modules/`uname -r`/build/include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing -pipe -fno-strength-reduce -mcpu=i386 -DCPU=386 -DMODULE -DMODVERSIONS -include /usr/src/linux/include/linux/modversions.h -c ip_wccp.c Then copy it to your /lib/modules/`uname -r`/misc directory, run depmod -a and modprobe ip_wccp. To automatically load it on every boot, edit your /etc/init.d/boot.local (or equivalent) and insert the modprobe command there. Final steps - local routing --------------------------- The next step is a simple iptables command: iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j REDIRECT --to-port 3128 The port 3128 is the port where your squid proxy is running. Put this in some init script that is executed after network start (possibly a custom firewall rule if you are using some kind of firewall). From now on, the worst of all browsers should no longer harm the internet - at least not from your network :) Feedback is welcome. Write to articles[at]gaugusch.at Updated: 2004-06-25 Source: http://gaugusch.at/squid.shtml
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor