Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
openSUSE:12.2
wondershaper
wondershaper-1.1a.diff
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File wondershaper-1.1a.diff of Package wondershaper
diff -Nur wondershaper-1.1a.orig/wshaper wondershaper-1.1a/wshaper --- wondershaper-1.1a.orig/wshaper 2002-04-16 16:26:35.000000000 +0200 +++ wondershaper-1.1a/wshaper 2004-09-29 17:06:24.247641806 +0200 @@ -1,51 +1,80 @@ -#!/bin/bash - +#!/bin/bash +# # Wonder Shaper # please read the README before filling out these values # # Set the following values to somewhat less than your actual download # and uplink speed. In kilobits. Also set the device that is to be shaped. -DOWNLINK=800 -UPLINK=220 -DEV=eth0 +# +# Source sysconfig file +if [ -f /etc/sysconfig/wondershaper ]; then +. /etc/sysconfig/wondershaper +fi + +DOWNLINK="$WSHAPER_DOWNLINK" +UPLINK="$WSHAPER_UPLINK" +DEV="$WSHAPER_DEV" +export DOWNLINK UPLINK DEV # low priority OUTGOING traffic - you can leave this blank if you want # low priority source netmasks -NOPRIOHOSTSRC=80 +NOPRIOHOSTSRC="$WSHAPER_NOPRIOHOSTSRC" # low priority destination netmasks -NOPRIOHOSTDST= +NOPRIOHOSTDST="$WSHAPER_NOPRIOHOSTDST" # low priority source ports -NOPRIOPORTSRC= +NOPRIOPORTSRC="$WSHAPER_NOPRIOPORTSRC" # low priority destination ports -NOPRIOPORTDST= +NOPRIOPORTDST="$WSHAPER_NOPRIOPORTDST" -# Now remove the following two lines :-) +# Check for QOS in the kernel +if tc -s qdisc ls dev lo > /dev/null 2>&1; then + true +else + echo "Your Kernel lacks QOS Support or you dont have the 'tc' tool installed" > /dev/stderr + exit 1 +fi -echo Please read the documentation in 'README' first :-\) -exit +# Check for sysconfig settings +function checkconf { +if [ -z "$DEV" ]; then + echo "Please set WSHAPER_DEV in /etc/sysconfig/wondershaper" > /dev/stderr + exit 1 +elif + [ -z "$DOWNLINK" ]; then + echo "Please set WSHAPER_DOWNLINK in /etc/sysconfig/wondershaper" > /dev/stderr + exit 1 +elif + [ -z "$UPLINK" ];then + echo "Please set WSHAPER_UPLINK in /etc/sysconfig/wondershaper" > /dev/stderr + exit 1 +fi +} -######################################################### +# start|stop|status -if [ "$1" = "status" ] -then +case "$@" in + start) + checkconf + ;; + status) + checkconf tc -s qdisc ls dev $DEV tc -s class ls dev $DEV - exit -fi - + exit 0 + ;; + stop) + tc qdisc del dev $DEV root > /dev/null 2>&1 + tc qdisc del dev $DEV ingress > /dev/null 2>&1 + exit 0 +esac # clean existing down- and uplink qdiscs, hide errors tc qdisc del dev $DEV root 2> /dev/null > /dev/null tc qdisc del dev $DEV ingress 2> /dev/null > /dev/null -if [ "$1" = "stop" ] -then - exit -fi - ###### uplink # install root CBQ diff -Nur wondershaper-1.1a.orig/wshaper.htb wondershaper-1.1a/wshaper.htb --- wondershaper-1.1a.orig/wshaper.htb 2002-04-16 16:26:51.000000000 +0200 +++ wondershaper-1.1a/wshaper.htb 2004-09-29 17:06:43.220184342 +0200 @@ -1,51 +1,80 @@ #!/bin/bash +# # Wonder Shaper # please read the README before filling out these values # # Set the following values to somewhat less than your actual download # and uplink speed. In kilobits. Also set the device that is to be shaped. +# +# Source sysconfig file +if [ -f /etc/sysconfig/wondershaper ]; then +. /etc/sysconfig/wondershaper +fi -DOWNLINK=800 -UPLINK=220 -DEV=ppp0 +DOWNLINK="$WSHAPER_DOWNLINK" +UPLINK="$WSHAPER_UPLINK" +DEV="$WSHAPER_DEV" +export DOWNLINK UPLINK DEV # low priority OUTGOING traffic - you can leave this blank if you want # low priority source netmasks -NOPRIOHOSTSRC= +NOPRIOHOSTSRC="$WSHAPER_NOPRIOHOSTSRC" # low priority destination netmasks -NOPRIOHOSTDST= +NOPRIOHOSTDST="$WSHAPER_NOPRIOHOSTDST" # low priority source ports -NOPRIOPORTSRC= +NOPRIOPORTSRC="$WSHAPER_NOPRIOPORTSRC" # low priority destination ports -NOPRIOPORTDST= +NOPRIOPORTDST="$WSHAPER_NOPRIOPORTDST" +# Check for QOS in the kernel +if tc -s qdisc ls dev lo > /dev/null 2>&1; then + true +else + echo "Your Kernel lacks QOS Support or you dont have the 'tc' tool installed" > /dev/stderr + exit 1 +fi -# Now remove the following two lines :-) +# Check for sysconfig settings +function checkconf { +if [ -z "$DEV" ]; then + echo "Please set WSHAPER_DEV in /etc/sysconfig/wondershaper" > /dev/stderr + exit 1 +elif + [ -z "$DOWNLINK" ]; then + echo "Please set WSHAPER_DOWNLINK in /etc/sysconfig/wondershaper" > /dev/stderr + exit 1 +elif + [ -z "$UPLINK" ];then + echo "Please set WSHAPER_UPLINK in /etc/sysconfig/wondershaper" > /dev/stderr + exit 1 +fi +} -echo Please read the documentation in 'README' first -exit +# start|stop|status -if [ "$1" = "status" ] -then +case "$@" in + start) + checkconf + ;; + status) + checkconf tc -s qdisc ls dev $DEV tc -s class ls dev $DEV - exit -fi - + exit 0 + ;; + stop) + tc qdisc del dev $DEV root > /dev/null 2>&1 + tc qdisc del dev $DEV ingress > /dev/null 2>&1 + exit 0 +esac # clean existing down- and uplink qdiscs, hide errors tc qdisc del dev $DEV root 2> /dev/null > /dev/null tc qdisc del dev $DEV ingress 2> /dev/null > /dev/null -if [ "$1" = "stop" ] -then - exit -fi - - ###### uplink # install root HTB, point default traffic to 1:20:
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
