openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File grub.spec of Package grub

#
# spec file for package grub
#
# Copyright (c) 2012 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.

# Please submit bugfixes or comments via http://bugs.opensuse.org/
#

Name:           grub
BuildRequires:  automake
%ifarch x86_64
BuildRequires:  gcc41-32bit
BuildRequires:  glibc-devel-32bit
BuildRequires:  libncurses5-32bit
BuildRequires:  ncurses-devel
BuildRequires:  ncurses-devel-32bit
%else
BuildRequires:  gcc41
BuildRequires:  glibc-devel
BuildRequires:  libncurses5
BuildRequires:  ncurses-devel
%endif
Version:        0.97
Release:        0
Source0:        %{name}-%{version}.tar.gz
Source1:        installgrub
Source2:        grubonce
Source3:        grub-install
Patch0:         %{name}-%{version}-path-patch
Patch1:         use_ferror.diff
Patch2:         grub-R
Patch3:         bad-assert-sideeffect
Patch4:         %{name}-gfxmenu-v8.diff
Patch5:         reiser-unpack
Patch6:         chainloader-devicefix
Patch7:         %{name}-%{version}-devicemap.diff
Patch8:         grub-linux-setup-fix
Patch9:         fix-uninitialized
Patch10:        force-LBA-off.diff
Patch11:        gcc4-diff
Patch12:        %{name}-%{version}-initrdaddr.diff
Patch13:        grub-a20.patch
Patch14:        disk-by-ID
Patch15:        e100-newIDs
Patch16:        recognise-zen
Patch17:        grub-install-fix-UUID_LABEL
Patch18:        ext2-support-256byte-inodes
Patch19:        grub-read-gpt
Patch20:        stage2-dir-callback.diff
Patch21:        stage2-wildcard.diff
Patch22:        stage2-wildcard-zerowidth.diff
Patch23:        stage2-wildcard-doc.diff
Patch24:        grub-%{version}-protexec.patch
Patch25:        pacify-autoconf
Patch26:        grub-grubonce-no-wait
Patch27:        grub-long-commandline
Patch28:        ext4-support
Patch29:        grub-acinclude-buildid-fix.diff
Patch30:        remove-buildid.diff
Patch31:        string-ops-fix
Patch32:        unsigned-blocks-n-offsets
Patch39:        document-grub-install.unsupported
Patch40:        grub-iso-fixes
Patch41:        stage2-gfx-cmdline-len-fix.diff
Patch42:        nulterminate-configfile
Patch43:        handle-incomplete-last-track
Patch44:        no-MAP_GROWSDOWN
Patch45:        grub-automake.patch
Url:            http://www.gnu.org/software/grub/grub.en.html
BuildRoot:      %{_tmppath}/%{name}-%{version}-build
Summary:        Grand Unified Boot Loader
License:        GPL-2.0+
Group:          System/Boot
PreReq:         fileutils sh-utils util-linux
Conflicts:      trustedgrub
ExclusiveArch:  %ix86 x86_64

%description
GNU GRUB is a multiboot boot loader. It was derived from GRUB. It is an
attempt to produce a boot loader for IBM PC-compatible machines that
has both the ability to be friendly to beginning or otherwise
nontechnically interested users and the flexibility to help experts in
diverse environments. It is compatible with Free/Net/OpenBSD and Linux.
It supports Win 9x/NT and OS/2 via chainloaders. It has a menu
interface and a command line interface.

%prep
%setup
rm -f acconfig.h || true
%patch0 -p1 -E
%patch1
%patch2 -p1
%patch3 -p1
%patch4
%patch5 -p1
%patch6 -p1
%patch7 -p1
%patch8 -p1
%patch9 -p1
%patch10 -p1
%patch11 -p1
%patch12 -p1
# A20 gate haunts even intel macs. Be extra careful,
# see http://www.win.tue.nl/~aeb/linux/kbd/A20.html
%patch13 -p1
%patch14 -p1
%patch15 -p1
%patch16 -p1
%patch17 -p1
%patch18 -p1
%patch19 -p1
# Disable the wildcard feature
#%patch20 -p1
#%patch21 -p1
#%patch22 -p1
#%patch23 -p1
%patch24 -p1
%patch25 -p1
%patch26 -p1
%patch27 -p1
%patch28 -p1
%patch29 -p1
%patch30
%patch31 -p1
%patch32 -p1
%patch39 -p1
%patch40 -p1
%patch41 -p1
%patch42 -p1
%patch43 -p1
%patch44 -p1
%patch45 -p1

%build
perl -pi -e 's,/usr/share/grub/i386-pc,/usr/lib/grub,' docs/grub.texi
%{?suse_update_config:%{suse_update_config -l -f . }}
export CC="gcc-4.1"
autoreconf --force --install
%ifarch x86_64
  EXTRACFLAGS=' -fno-stack-protector -fno-strict-aliasing -minline-all-stringops -m32 -fno-asynchronous-unwind-tables -fno-unwind-tables'
%else
  EXTRACFLAGS=' -fno-stack-protector -fno-strict-aliasing -minline-all-stringops -fno-asynchronous-unwind-tables -fno-unwind-tables'
%endif  
# RPM_OPT_FLAGS considered harmful on 64-bit :-(
CFLAGS="-m32 -Os -DNDEBUG -W -Wall -Wpointer-arith $EXTRACFLAGS" ./configure \
  --prefix=/usr --infodir=%{_infodir} --mandir=%{_mandir} --datadir=/usr/lib \
  --disable-auto-linux-mem-opt --enable-diskless \
  --enable-{3c50{3,7},3c5{0,2}9,3c595,3c90x,cs89x0,davicom,depca,eepro{,100},epic100} \
  --enable-{exos205,lance,ne,ne2100,ni{50,52,65}00,ns8390} \
  --enable-{rtl8139,sk-g16,smc9000,tiara,tulip,via-rhine,w89c840,wd} 
make
(cd stage2; mv nbgrub pxegrub ..)
mv stage2/stage2{,.netboot}
make clean
CFLAGS="-m32 -Os -DNDEBUG -W -Wall -Wpointer-arith $EXTRACFLAGS" ./configure \
  --prefix=/usr --infodir=%{_infodir} --mandir=%{_mandir} --datadir=/usr/lib \
  --disable-auto-linux-mem-opt --disable-ffs --disable-ufs2
make

%install
make -k DESTDIR=$RPM_BUILD_ROOT install 
mkdir -p $RPM_BUILD_ROOT/boot/grub
ln -sfn . $RPM_BUILD_ROOT/boot/boot
(cd $RPM_BUILD_ROOT/usr/lib/grub && mv *-suse/* . && rmdir *-suse) >/dev/null 2>&1 || true
cp -p {nb,pxe}grub stage2/stage2{,.netboot} $RPM_BUILD_ROOT/usr/lib/grub
mv $RPM_BUILD_ROOT/usr/sbin/grub-install{,.unsupported}
mv $RPM_BUILD_ROOT/%{_mandir}/man8/grub-install{,.unsupported}.8
install -p -m 755 %{SOURCE2} %{SOURCE3} $RPM_BUILD_ROOT/usr/sbin/.
# This fine script used to do everything at once, which
# isn't necessary any more with Yast2 support.
# Kept only for reference and historical reasons.
# install -o root -g root -m 744 %{SOURCE1} /usr/sbin
# grub-terminfo is irrelevant to us
rm -f $RPM_BUILD_ROOT/usr/sbin/grub-terminfo
rm -f $RPM_BUILD_ROOT/usr/share/man/man8/grub-terminfo*
rm -f $RPM_BUILD_ROOT/usr/sbin/grub-set-default

%clean
rm -rf $RPM_BUILD_ROOT;

%preun
%install_info --delete --info-dir=%{_infodir} %{_infodir}/%{name}.info.gz
%install_info --delete --info-dir=%{_infodir} %{_infodir}/multiboot.info.gz

%files
%defattr(-,root,root)
%doc BUGS NEWS TODO README THANKS AUTHORS INSTALL ChangeLog COPYING 
%docdir %{_infodir}
%docdir %{_mandir}
%docdir /usr/share/doc/packages/grub
%dir /boot/grub
/usr/bin/mbchk
%{_infodir}/grub*.gz
%{_infodir}/multiboot.info.gz
%{_mandir}/man1/mbchk.1.gz
%{_mandir}/man8/grub-install.unsupported.8.gz
%{_mandir}/man8/grub.8.gz
%{_mandir}/man8/grub-md5-crypt.8.gz
/usr/lib/grub
%defattr(755,root,root)
/usr/sbin/grub
/usr/sbin/grubonce
/usr/sbin/grub-install
/usr/sbin/grub-install.unsupported
/usr/sbin/grub-md5-crypt
#/usr/sbin/installgrub
%dir /boot/boot

%post
# should anything go wrong the system will remain bootable :
if [ -e /boot/grub/stage2 ] ; then
	mv /boot/grub/stage2{,.old}
fi
# copy especially stage2 over, because it will be modified in-place !
cp -p /usr/lib/grub/*stage1*   /boot/grub 2>/dev/null || true
%install_info --info-dir=%{_infodir} %{_infodir}/%{name}.info.gz
%install_info --info-dir=%{_infodir} %{_infodir}/multiboot.info.gz
#special hack for #46843
dd if=/usr/lib/grub/stage2 of=/boot/grub/stage2 bs=256k 
sync
# sync may take much longer on XFS (Bug#223773)
bootpart=`df /boot/. | perl -ane '$F[0] =~ m,/dev/[^\s]*, && print $F[0]'`
eval `/sbin/blkid -u filesystem -o udev $bootpart`
XFS_FREEZE=`type -p xfs_freeze` || true
if [ -n "$XFS_FREEZE" ] ; then
  if [ "X$ID_FS_TYPE" = "X" -o "t_$ID_FS_TYPE" = "t_xfs" ]; then
	sync; sleep 5; sync; sleep 5; sync
	(xfs_freeze -f /; xfs_freeze -f /boot) > /dev/null 2>&1
	(xfs_freeze -u /; xfs_freeze -u /boot) > /dev/null 2>&1
  fi
fi
if [ -e /etc/sysconfig/bootloader ] ; then
    source /etc/sysconfig/bootloader
fi

LOADER_TYPE=${LOADER_TYPE:-grub}

# command sequence to update-install stage1/stage2.
# leave everything else alone !
if [ "x$LOADER_TYPE" = "xgrub" -a -e /etc/grub.conf ] ; then
	/usr/sbin/grub --batch < /etc/grub.conf >/dev/null 2>&1
fi
exit 0

%changelog

Places

File grub.spec of Package grub

Places