File storeBackup-3.2.config.default of Package storeBackup

Overview Repositories Revisions Requests Users Attributes Meta

File storeBackup-3.2.config.default of Package storeBackup (Revision d8e2aab2704d63fafa7ff03db75befe6)

Currently displaying revision d8e2aab2704d63fafa7ff03db75befe6 , Show latest

# configuration file for storeBackup.pl

# You can set a value specified with '-cf_key' (eg. logFiles) and
# continue at the next lines which have to begin with a white space:
# logFiles = /var/log/messages  /var/log/cups/access_log
#      /var/log/cups/error_log
# One ore more white spaces are interpreted as separators.
# You can use single quotes or double quotes to group strings
# together, eg. if you have a filename with a blank in its name:
# logFiles = '/var/log/my strage log'
# will result in one filename, not in three.
# If an option should have *no value*, write:
# logFiles =
# If you want the default value, uncomment it:
# #logFile =
# You can also use environment variables, like $XXX or ${XXX} like in
# a shell. Single quotes will mask environment variables, while double
# quotes will not.
# You can mask $, {, }, ", ' with a backslash (\), eg. \$
# Lines beginning with a '#' are ignored (use this for comments)
#
# You can overwrite settings in the command line. You can remove
# the setting also in the command by using the --unset feature, eg.:
# '--unset doNotDelete' or '--unset --doNotDelete'

# source directory (*** must be specified ***)
#sourceDir=

# top level directory of all linked backups (*** must be specified ***)
# storeBackup must know for consistency checking where all your backups
# are. This is done to make sure that your backups are consistent if you
# used --lateLinks.
#backupDir=

# series directory, default is 'default'
# relative path from backupDir
#series=

# ------------------------------------------------------------------------
# you do not need specify the options below to get a running configuration
# (but they give you more features and more control)
#

# directory for temporary file, default is /tmp
#tmpDir=

# List of other backup directories to consider for
# hard linking. Relative path from backupDir!
# Format (examples):
# backupSeries/2002.08.29_08.25.28 -> consider this backup
# or
# 0:backupSeries    -> last (youngest) backup in <backupDir>/backupSeries
# 1:backupSeries    -> first before last backup in <backupDir>/backupSeries
# n:backupSeries    -> n'th before last backup in <backupDir>/backupSeries
# 3-5:backupSeries  -> 3rd, 4th and 5th in <backupDir>/backupSeries
# all:backupSeries  -> all in <backupDir>/backupSeries
# This option is respective useful, if you want to hard link
# to backup trees from different backups. If you make these
# backups in order (never parallel), you should use 0:backupSeries to
# the other backup series. If it is possible that they can run in
# parallel, you should use 1:backupSeries to avoid useless copies in
# the backup. This option should be used for *all* backups, which
# should share hard links (vice versa). Naturally, all the backups
# with joined hard links have to be in the same file system!
#otherBackupSeries=

# lock file, if exist, new instances will finish if
# an old is allready running, default is /tmp/storeBackup.lock
#lockFile=

# remove the lock files before deleting old backups
# default ('no') is to delete the lock file after deleting
# possible values are 'yes' and 'no'
#unlockBeforeDel=

# Directories to except from backing up (relative path).
# You can use shell type wildcards.
# These directories have to be separated by space or newline.
#exceptDirs=

# continue if one or more of the exceptional directories
# do not exist (no is stopping processing)
# default is 'no', can be 'yes' or 'no'
#contExceptDirsErr=

# Directories to include in the backup (relative path inside of the backup).
# You can use shell type wildcards.
# These directories have to be separated by space or newline.
#includeDirs=

# rule for excluding files / only for experienced administrators
# !!! see README file 'including / excluding files and directories'
# EXAMPLE: 
# searchRule = ( '$size > &::SIZE("3M")' and '$uid eq "hjc"' ) or
#    ( '$mtime > &::DATE("3d4h")' and not '$file =~ m#/tmp/#' )'
#exceptRule=

# For explanations, see 'exceptRule'.
#includeRule=

# write a file name .storeBackup.notSaved.bz2 with the
# names of all skipped files, default is 'no', can be 'yes' or 'no'
#writeExcludeLog=

# do not save the specified types of files, allowed: Sbcfpl
# S - file is a socket
# b - file is a block special file
# c - file is a character special file
# f - file is a plain file
# p - file is a named pipe
# l - file is a symbolic link
# Spbc can only be backed up if GNU copy is available.
#exceptTypes=

# Activate this option if your system's cp is a full-featured GNU
# version. In this case you will be able to also backup several
# special file types like sockets.
#cpIsGnu=

# exec job before starting the backup, checks lockFile (-L) before
# starting (e.g. can be used for rsync) stops execution if job returs
# exit status != 0
#precommand=

# exec job after finishing the backup, but before erasing of old
# backups reports if job returs exit status != 0
#postcommand=

# follow symbolic links like directories up to depth 0 -> do not
# follow links
#followLinks=

# If this option is disabled, then the files in the backup will not
# neccessarily have the same permissions and owner as the originals.
# This speeds up backups on network drives a lot. Correct permissions
# are restored by storeBackupRecover.pl no matter what this option is
# set to. Default is 'no'
#ignorePerms=

# do *not* write hard links to existing files in the backup
# during the backup (yes|no)
# you have to call the program storeBackupUpdateBackup.pl
# later on your server if you set this flag to 'yes'
# default = no: do not write hard links
#lateLinks=

# only in combination with --lateLinks
# compression from files >= size will be done later,
# the file is (temporarily) copied into the backup
# default = no: no late compression
#lateCompress=

# write temporary dbm files in --tmpdir
# use this if you have not enough RAM, default is no
#saveRAM=

# compress command (with options), default is <bzip2>
#compress=

# uncompress command (with options), default is <bzip2 -d>
#uncompress=

# Files smaller than this size will never be compressed but always
# copied. Default is 1024
#minCompressSize=

# postfix to add after compression, default is <.bz2>
#postfix=

# maximal number of parallel compress operations,
# default = choosen automatically
#noCompress=

# length of queue to store files before compression,
# default = 1000
#queueCompress=

# maximal number of parallel copy operations,
# default = 1
#noCopy=

# length of queue to store files before copying,
# default = 1000
#queueCopy=

# maximum bandwidth, KBytes per second per copying process
# storeBackup uses rsync for this option, make shure it is installed
# default = 0 -> no limit, use cp for copying
#copyBWLimit=

# write statistics about used space in log file
# default is 'no'
#withUserGroupStat=

# write statistics about used space in name file
#		    will be overridden each time
# if no file name is given, nothing will be written
# format is:
# identifier uid userName value
# identifier gid groupName value
#userGroupStatFile=

# do not compress files with the following
# suffix (uppercase included):
# (if you set this to '.*', no files will be compressed)
# Default is \.zip \.bz2 \.gz \.tgz \.jpg \.gif \.tiff \.tif \.mpeg \.mpg \.mp3 \.ogg \.gpg \.png
#exceptSuffix=

# like --exceptSuffix, but do not replace defaults, add
#addExceptSuffix=

# default is 'no', if you do not want to compress, say 'yes'
#doNotCompressMD5File=

# permissions of .md5checkSumFile, default is 0600
#chmodMD5File=

# verbose messages, about exceptRule and includeRule
# and added files. default is 'no'
#verbose=

# generate debug messages, levels are 0 (none, default),
# 1 (some), 2 (many) messages
#debug=

# reset access time in the source directory - but this will
# change ctime (time of last modification of file status
# information
# default is 'no', if you want this, say 'yes'
#resetAtime=

# do not delete any old backup (e.g. specified via --keepAll or
# --keepWeekday) but print a message. This is for testing.
# Values are 'yes' and 'no'. Default is 'no' which means to delete.
#doNotDelete=

# delete old backups which where not finished
# this will not happen if doNotDelete is set
# Values are 'yes' and 'no'. Default is 'no' which means to delete.
#deleteNotFinishedDirs=

# keep backups which are not older than the specified amount
# of time. This is like a default value for all days in
# --keepWeekday. Begins deleting at the end of the script
# the time range has to be specified in format 'dhms', e.g.
# 10d4h means 10 days and 4 hours
# default = 30d;
# An archive flag is not possible with this parameter (see below).
#keepAll=

# keep backups for the specified days for the specified
# amount of time. Overwrites the default values choosen in
# --keepAll. 'Mon,Wed:40d Sat:60d10m' means:
# keep backups from Mon and Wed 40days + 5mins
# keep backups from Sat 60days + 10mins
# keep backups from the rest of the days like spcified in
# --keepAll (default 30d)
# you can also set the 'archive flag'.
# 'Mon,Wed:a40d5m Sat:60d10m' means:
# keep backups from Mon and Wed 40days + 5mins + 'archive'
# keep backups from Sat 60days + 10mins
# keep backups from the rest of the days like specified in
# --keepAll (default 30d)
# If you also use the 'archive flag' it means to not
# delete the affected directories via --keepMaxNumber:
# a10d4h means 10 days and 4 hours and 'archive flag'
#keepWeekday=

# do not delete the first backup of a year
# format is timePeriod with possible 'archive flag'
#keepFirstOfYear=

# do not delete the last backup of a year
# format is timePeriod with possible 'archive flag'
#keepLastOfYear=

# do not delete the first backup of a month
# format is timePeriod with possible 'archive flag'
#keepFirstOfMonth=

# do not delete the last backup of a month
# format is timePeriod with possible 'archive flag'
#keepLastOfMonth=

# default: 'Sun'. This value is used for calculating
# --keepFirstOfWeek and --keepLastOfWeek
#firstDayOfWeek=

# do not delete the first backup of a week
# format is timePeriod with possible 'archive flag'
#keepFirstOfWeek=

# do not delete the last backup of a week
# format is timePeriod with possible 'archive flag'
#keepLastOfWeek=

# keep multiple backups of one day up to timePeriod
# format is timePeriod, 'archive flag' is not possible
# default is 7d
#keepDuplicate=

# Keep that miminum of backups. Multiple backups of one
# day are counted as one backup. Default is 10.
#keepMinNumber=

# Try to keep only that maximum of backups. If you have more
# backups, the following sequence of deleting will happen:
# - delete all duplicates of a day, beginning with the old
#   once, except the oldest of every day
# - if this is not enough, delete the rest of the backups
#   beginning with the oldest, but *never* a backup with
#   the 'archive flag' or the last backup
#keepMaxNumber=

# Alternative deletion scheme. If you use this option, all
# other keep options are ignored. Preserves backups depending
# on their *relative* age. Example:
#
#   keepRelative = 1d 7d 61d 92d
#
# will (try to) ensure that there is always
#
# - One backup between 1 day and 7 days old
# - One backup between 5 days and 2 months old
# - One backup between ~2 months and ~3 months old
#
# If there is no backup for a specified timespan (e.g. because the
# last backup was done more than 2 weeks ago) the next older backup
# will be used for this timespan.
#keepRelative =

# print progress report after each 'number' files
# Default is 0, which means no reports.
#progressReport=

# print depth of actual readed directory during backup
# default is 'no', values are 'yes' and 'no'
#printDepth=

# ignore read errors in source directory; not readable
# directories does not cause storeBackup.pl to stop processing
# Values are 'yes' and 'no'. Default is 'no' which means not
# to ignore them
#ignoreReadError=

# ignore specified time when compairing files; possible
# values are: 'ctime', 'mtime' or 'none', default is 'none'
# Setting this parameter only makes sense in mixed
# environments, when one time has stochastic values.
#ignoreTime=

# name of the log file (default is STDOUT)
#logFile=

# if you specify a log file with --logFile you can
# additionally print the output to STDOUT with this flag
# Values are 'yes' and 'no'. Default is 'no'.
#plusLogStdout=

# output in logfile with time: 'yes' or 'no'
# default = no
#suppressTime=

# maximal length of log file, default = 1e6
#maxFilelen=

# number of old log files, default = 5
#noOfOldFiles=

# save log files with date and time instead of deleting the
# old (with [-noOldFiles]): 'yes' or 'no', default = 'no'
#saveLogs=

# compress saved log files (e.g. with 'gzip -9')
# default is 'bzip2'
#compressWith=

# write log file (also) in the backup directory:
# 'yes' or 'no', default is 'no'
# Be aware that this log does not contain all error
# messages of the one specified with --logFile!
# Some errors are possible before the backup
# directory is created.
#logInBackupDir=

# compress the log file in the backup directory:
# 'yes' or 'no', default is 'yes'
#compressLogInBackupDir=

# filename to use for writing the above log file,
# default is '.storeBackup.log'
#logInBackupDirFileName=

Places

File storeBackup-3.2.config.default of Package storeBackup (Revision d8e2aab2704d63fafa7ff03db75befe6)

Places