File fdm_materials-3.6.0.obscpio of Package cura-fdm-materials

Overview Repositories Revisions Requests Users Attributes Meta

File fdm_materials-3.6.0.obscpio of Package cura-fdm-materials (Revision c781a65ace9f53fcac51dc071b8f6e3e)

Currently displaying revision c781a65ace9f53fcac51dc071b8f6e3e , Show latest

07070100000000000081A4000003E800000064000000015BE2BC8400000364000000000000000000000000000000000000002300000000fdm_materials-3.6.0/CMakeLists.txtproject(fdm_materials NONE)

cmake_minimum_required(VERSION 2.8.12)

include(CMakePackageConfigHelpers)

option(EMBEDDED "Build for Ultimaker Embedded software" OFF)

if(NOT EMBEDDED)
    set(INSTALL_PATH "share/cura/resources/materials"
        CACHE PATH
        "The path to install the materials to. Should ideally be relative to CMAKE_INSTALL_PREFIX"
        )
else()
    # Then we're cmaking for Jedi
    set(INSTALL_PATH "share/fdm_materials"
        CACHE STRING
        "Destination to install the materials to. Should be relative to CMAKE_INSTALL_PREFIX")
    
    if(IS_ABSOLUTE ${INSTALL_PATH})
        set(INSTALL_PATH ${INSTALL_PATH})
    else()
        set(INSTALL_PATH ${CMAKE_INSTALL_PREFIX}/${INSTALL_PATH})
    endif()
endif()

file(GLOB _files *.fdm_material *.sig)

install(FILES ${_files} DESTINATION ${INSTALL_PATH})

include(CPackConfig.cmake)
07070100000001000081A4000003E800000064000000015BE2BC840000016B000000000000000000000000000000000000002600000000fdm_materials-3.6.0/CPackConfig.cmakeset(CPACK_PACKAGE_VENDOR "Ultimaker")
set(CPACK_PACKAGE_CONTACT "Ultimaker <info@ultimaker.com>")
set(CPACK_PACKAGE_DESCRIPTION_SUMMARY "Ultimaker Embedded services")
set(CPACK_PACKAGE_VERSION_MAJOR 9999)
set(CPACK_PACKAGE_VERSION_MINOR 99)
set(CPACK_PACKAGE_VERSION_PATCH 99)
set(CPACK_GENERATOR "DEB")
set(CPACK_DEBIAN_PACKAGE_ARCHITECTURE all)

include(CPack)
07070100000002000081A4000003E800000064000000015BE2BC84000002F6000000000000000000000000000000000000002000000000fdm_materials-3.6.0/Jenkinsfilenode('linux && cura') {
    timeout(time: 5, unit: "MINUTES") {
        // Prepare building
        stage('Prepare') {
            // Ensure we start with a clean build directory.
            step([$class: 'WsCleanup'])

// Checkout whatever sources are linked to this pipeline.
            checkout scm
        }

// If any error occurs during building, we want to catch it and continue with the "finale" stage.
        catchError {
            // Perform sanity checks
            stage('Sanity Checks') {
                if (fileExists("scripts/check_material_profiles.py")) {
                    sh "${env.CURA_ENVIRONMENT_PATH}/master/bin/python3 scripts/check_material_profiles.py"
                }
            }
        }
    }
}
07070100000003000081A4000003E800000064000000015BE2BC8400001AFF000000000000000000000000000000000000001C00000000fdm_materials-3.6.0/LICENSECreative Commons Legal Code

CC0 1.0 Universal

CREATIVE COMMONS CORPORATION IS NOT A LAW FIRM AND DOES NOT PROVIDE LEGAL SERVICES. DISTRIBUTION OF THIS DOCUMENT DOES NOT CREATE AN ATTORNEY-CLIENT RELATIONSHIP. CREATIVE COMMONS PROVIDES THIS INFORMATION ON AN "AS-IS" BASIS. CREATIVE COMMONS MAKES NO WARRANTIES REGARDING THE USE OF THIS DOCUMENT OR THE INFORMATION OR WORKS PROVIDED HEREUNDER, AND DISCLAIMS LIABILITY FOR DAMAGES RESULTING FROM THE USE OF THIS DOCUMENT OR THE INFORMATION OR WORKS PROVIDED HEREUNDER.

Statement of Purpose

The laws of most jurisdictions throughout the world automatically confer exclusive Copyright and Related Rights (defined below) upon the creator and subsequent owner(s) (each and all, an "owner") of an original work of authorship and/or a database (each, a "Work").

Certain owners wish to permanently relinquish those rights to a Work for the purpose of contributing to a commons of creative, cultural and scientific works ("Commons") that the public can reliably and without fear of later claims of infringement build upon, modify, incorporate in other works, reuse and redistribute as freely as possible in any form whatsoever and for any purposes, including without limitation commercial purposes. These owners may contribute to the Commons to promote the ideal of a free culture and the further production of creative, cultural and scientific works, or to gain reputation or greater distribution for their Work in part through the use and efforts of others. For these and/or other purposes and motivations, and without any expectation of additional consideration or compensation, the person associating CC0 with a Work (the "Affirmer"), to the extent that he or she is an owner of Copyright and Related Rights in the Work, voluntarily elects to apply CC0 to the Work and publicly distribute the Work under its terms, with knowledge of his or her Copyright and Related Rights in the Work and the meaning and intended legal effect of CC0 on those rights.

1. Copyright and Related Rights. A Work made available under CC0 may be protected by copyright and related or neighboring rights ("Copyright and Related Rights"). Copyright and Related Rights include, but are not limited to, the following:
  i. the right to reproduce, adapt, distribute, perform, display, communicate, and translate a Work;
 ii. moral rights retained by the original author(s) and/or performer(s);
iii. publicity and privacy rights pertaining to a person's image or likeness depicted in a Work;
 iv. rights protecting against unfair competition in regards to a Work, subject to the limitations in paragraph 4(a), below;
  v. rights protecting the extraction, dissemination, use and reuse of data in a Work;
 vi. database rights (such as those arising under Directive 96/9/EC of the European Parliament and of the Council of 11 March 1996 on the legal protection of databases, and under any national implementation thereof, including any amended or successor version of such directive); and
vii. other similar, equivalent or corresponding rights throughout the world based on applicable law or treaty, and any national implementations thereof.

2. Waiver. To the greatest extent permitted by, but not in contravention of, applicable law, Affirmer hereby overtly, fully, permanently, irrevocably and unconditionally waives, abandons, and surrenders all of Affirmer's Copyright and Related Rights and associated claims and causes of action, whether now known or unknown (including existing as well as future claims and causes of action), in the Work (i) in all territories worldwide, (ii) for the maximum duration provided by applicable law or treaty (including future time extensions), (iii) in any current or future medium and for any number of copies, and (iv) for any purpose whatsoever, including without limitation commercial, advertising or promotional purposes (the "Waiver"). Affirmer makes the Waiver for the benefit of each member of the public at large and to the detriment of Affirmer's heirs and successors, fully intending that such Waiver shall not be subject to revocation, rescission, cancellation, termination, or any other legal or equitable action to disrupt the quiet enjoyment of the Work by the public as contemplated by Affirmer's express Statement of Purpose.

3. Public License Fallback. Should any part of the Waiver for any reason be judged legally invalid or ineffective under applicable law, then the Waiver shall be preserved to the maximum extent permitted taking into account Affirmer's express Statement of Purpose. In addition, to the extent the Waiver is so judged Affirmer hereby grants to each affected person a royalty-free, non transferable, non sublicensable, non exclusive, irrevocable and unconditional license to exercise Affirmer's Copyright and Related Rights in the Work (i) in all territories worldwide, (ii) for the maximum duration provided by applicable law or treaty (including future time extensions), (iii) in any current or future medium and for any number of copies, and (iv) for any purpose whatsoever, including without limitation commercial, advertising or promotional purposes (the "License"). The License shall be deemed effective as of the date CC0 was applied by Affirmer to the Work. Should any part of the License for any reason be judged legally invalid or ineffective under applicable law, such partial invalidity or ineffectiveness shall not invalidate the remainder of the License, and in such case Affirmer hereby affirms that he or she will not (i) exercise any of his or her remaining Copyright and Related Rights in the Work or (ii) assert any associated claims and causes of action with respect to the Work, in either case contrary to Affirmer's express Statement of Purpose.

4. Limitations and Disclaimers.

a. No trademark or patent rights held by Affirmer are waived, abandoned, surrendered, licensed or otherwise affected by this document.
 b. Affirmer offers the Work as-is and makes no representations or warranties of any kind concerning the Work, express, implied, statutory or otherwise, including without limitation warranties of title, merchantability, fitness for a particular purpose, non infringement, or the absence of latent or other defects, accuracy, or the present or absence of errors, whether or not discoverable, all to the greatest extent permissible under applicable law.
 c. Affirmer disclaims responsibility for clearing rights of other persons that may apply to the Work or any use thereof, including without limitation any person's Copyright and Related Rights in the Work. Further, Affirmer disclaims responsibility for obtaining any necessary consents, permissions or other rights required for any use of the Work.
d. Affirmer understands and acknowledges that Creative Commons is not a party to this document and has no duty or obligation with respect to this CC0 or use of the Work.
07070100000004000081A4000003E800000064000000015BE2BC8400000400000000000000000000000000000000000000003600000000fdm_materials-3.6.0/Vertex_Delta_ABS.xml.fdm_material<?xml version='1.0' encoding='utf-8'?>
<fdmmaterial version="1.3" xmlns="http://www.ultimaker.com/material">
    <metadata>
        <name>
            <brand>Velleman</brand>
            <material>ABS</material>
            <color>Generic</color>
            <label>Vertex Delta ABS</label>
        </name>
        <color_code>#ffc924</color_code>
        <compatible>True</compatible>
        <GUID>4edd8fce-0851-43e5-808a-970b4bfe8b10</GUID>
        <adhesion_info />
        <version>2</version>
        <description />
    </metadata>
    <properties>
        <diameter>1.75</diameter>
        <density>1.24</density>
    </properties>
    <settings>
        <setting key="standby temperature">225.0</setting>
        <setting key="print cooling">0.0</setting>
        <setting key="retraction amount">3.0</setting>
        <setting key="print temperature">250.0</setting>
        <setting key="heated bed temperature">0.0</setting>
        <setting key="retraction speed">150.0</setting>
    </settings>
</fdmmaterial>
07070100000005000081A4000003E800000064000000015BE2BC8400000401000000000000000000000000000000000000003600000000fdm_materials-3.6.0/Vertex_Delta_PET.xml.fdm_material<?xml version='1.0' encoding='utf-8'?>
<fdmmaterial version="1.3" xmlns="http://www.ultimaker.com/material">
    <metadata>
        <name>
            <brand>Velleman</brand>
            <material>PET</material>
            <color>Generic</color>
            <label>Vertex Delta PET</label>
        </name>
        <color_code>#ffc924</color_code>
        <compatible>True</compatible>
        <GUID>0e20a24a-3248-4b9f-96f9-69ee388abd0c</GUID>
        <adhesion_info />
        <version>2</version>
        <description />
    </metadata>
    <properties>
        <diameter>1.75</diameter>
        <density>1.24</density>
    </properties>
    <settings>
        <setting key="standby temperature">215.0</setting>
        <setting key="print cooling">10.0</setting>
        <setting key="retraction amount">3.0</setting>
        <setting key="print temperature">240.0</setting>
        <setting key="heated bed temperature">0.0</setting>
        <setting key="retraction speed">150.0</setting>
    </settings>
</fdmmaterial>
07070100000006000081A4000003E800000064000000015BE2BC8400000401000000000000000000000000000000000000003600000000fdm_materials-3.6.0/Vertex_Delta_PLA.xml.fdm_material<?xml version='1.0' encoding='utf-8'?>
<fdmmaterial version="1.3" xmlns="http://www.ultimaker.com/material">
    <metadata>
        <name>
            <brand>Velleman</brand>
            <material>PLA</material>
            <color>Generic</color>
            <label>Vertex Delta PLA</label>
        </name>
        <color_code>#ffc924</color_code>
        <compatible>True</compatible>
        <GUID>8d2731c8-b209-4202-b5d0-0d2d57070736</GUID>
        <adhesion_info />
        <version>2</version>
        <description />
    </metadata>
    <properties>
        <diameter>1.75</diameter>
        <density>1.24</density>
    </properties>
    <settings>
        <setting key="standby temperature">175.0</setting>
        <setting key="print cooling">40.0</setting>
        <setting key="retraction amount">3.0</setting>
        <setting key="print temperature">200.0</setting>
        <setting key="heated bed temperature">0.0</setting>
        <setting key="retraction speed">150.0</setting>
    </settings>
</fdmmaterial>
07070100000007000081A4000003E800000064000000015BE2BC8400000401000000000000000000000000000000000000003600000000fdm_materials-3.6.0/Vertex_Delta_TPU.xml.fdm_material<?xml version='1.0' encoding='utf-8'?>
<fdmmaterial version="1.3" xmlns="http://www.ultimaker.com/material">
    <metadata>
        <name>
            <brand>Velleman</brand>
            <material>TPU</material>
            <color>Generic</color>
            <label>Vertex Delta TPU</label>
        </name>
        <color_code>#ffc924</color_code>
        <compatible>True</compatible>
        <GUID>a5ab90e5-9f5d-445b-b0c5-5312dafa2e27</GUID>
        <adhesion_info />
        <version>2</version>
        <description />
    </metadata>
    <properties>
        <diameter>1.75</diameter>
        <density>1.24</density>
    </properties>
    <settings>
        <setting key="standby temperature">195.0</setting>
        <setting key="print cooling">20.0</setting>
        <setting key="retraction amount">3.0</setting>
        <setting key="print temperature">220.0</setting>
        <setting key="heated bed temperature">0.0</setting>
        <setting key="retraction speed">150.0</setting>
    </settings>
</fdmmaterial>
07070100000008000081A4000003E800000064000000015BE2BC8400000369000000000000000000000000000000000000003300000000fdm_materials-3.6.0/chromatik_pla.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Chromatik</brand>
            <material>PLA</material>
            <color>Generic</color>
        </name>
        <GUID>69fd1f24-f411-470e-8158-9e5552f36147</GUID>
        <version>1</version>
        <color_code>#ffc924</color_code>
        <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>1.74</diameter>
    </properties>
    <settings>
        <setting key="print temperature">205</setting>
    </settings>
</fdmmaterial>
07070100000009000081A4000003E800000064000000015BE2BC84000006FE000000000000000000000000000000000000003900000000fdm_materials-3.6.0/dsm_arnitel2045_175.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>DSM</brand>
            <material>TPC</material>
            <color>Generic</color>
            <label>Arnitel2045</label>
        </name>
        <GUID>fc67dfa2-7f71-4ca8-8ba5-dfe802fda22c</GUID>
        <version>2</version>
        <color_code>#ee51f8</color_code>
    </metadata>
    <properties>
        <density>1.10</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">215</setting>
        <setting key="heated bed temperature">50</setting>
        <setting key="standby temperature">160</setting>

<machine>
            <machine_identifier manufacturer="Cartesio bv" product="cartesio" />
            <setting key="print cooling">40.0</setting>
            <setting key="standby temperature">160</setting>
            <setting key="retraction speed">20</setting>
            <setting key="heated bed temperature">50</setting>
            <setting key="print temperature">215</setting>
            <hotend id="0.25mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.0</setting>
            </hotend>
            <hotend id="0.4mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.0</setting>
            </hotend>
            <hotend id="0.8mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.5</setting>
            </hotend>
        </machine>
    </settings>
</fdmmaterial>
0707010000000A000081A4000003E800000064000000015BE2BC8400000706000000000000000000000000000000000000003900000000fdm_materials-3.6.0/dsm_novamid1070_175.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>DSM</brand>
            <material>PA copolymer</material>
            <color>Generic</color>
            <label>Novamid1070</label>
        </name>
        <GUID>edcde954-ee11-4a23-9f11-56d2aa03284b</GUID>
        <version>2</version>
        <color_code>#f395f9</color_code>
    </metadata>
    <properties>
        <density>1.10</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">255</setting>
        <setting key="heated bed temperature">75</setting>
        <setting key="standby temperature">220</setting>

<machine>
            <machine_identifier manufacturer="Cartesio bv" product="cartesio" />
            <setting key="print cooling">0.0</setting>
            <setting key="standby temperature">220</setting>
            <setting key="retraction speed">20</setting>
            <setting key="heated bed temperature">75</setting>
            <setting key="print temperature">255</setting>
            <hotend id="0.25mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.0</setting>
            </hotend>
            <hotend id="0.4mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.0</setting>
            </hotend>
            <hotend id="0.8mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.5</setting>
            </hotend>
        </machine>
    </settings>
</fdmmaterial>
0707010000000B000081A4000003E800000064000000015BE2BC8400000351000000000000000000000000000000000000003200000000fdm_materials-3.6.0/fabtotum_abs.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>FABtotum</brand>
            <material>ABS</material>
            <color>Generic</color>
        </name>
        <GUID>956b9054-e5e8-4852-8f5b-1332b73fcd07</GUID>
        <version>1</version>
        <description>FABtotum generic ABS profile.</description>
        <adhesion_info>Recommended nozzle temperature: 250...260C, bed temperature: 90...100C, layer fan: off...50%, adhesion type: raft.</adhesion_info>
    </metadata>
    <properties>
        <density>1.1</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">250.0</setting>
        <setting key="heated bed temperature">95.0</setting>
    </settings>
</fdmmaterial>
0707010000000C000081A4000003E800000064000000015BE2BC840000034F000000000000000000000000000000000000003400000000fdm_materials-3.6.0/fabtotum_nylon.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>FABtotum</brand>
            <material>Nylon</material>
            <color>Generic</color>
        </name>
        <GUID>68c674d6-1289-4a44-8d69-e8a2b1a49855</GUID>
        <version>1</version>
        <description>FABtotum generic Nylon profile.</description>
        <adhesion_info>Recommended nozzle temperature: 230...240C, bed temperature: 80...90C, layer fan: off, adhesion type: raft.</adhesion_info>
    </metadata>
    <properties>
        <density>1.14</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">240.0</setting>
        <setting key="heated bed temperature">90.0</setting>
    </settings>
</fdmmaterial>
0707010000000D000081A4000003E800000064000000015BE2BC840000034B000000000000000000000000000000000000003200000000fdm_materials-3.6.0/fabtotum_pla.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>FABtotum</brand>
            <material>PLA</material>
            <color>Generic</color>
        </name>
        <GUID>2adcb50b-94b5-4393-bcc8-e6d4e45d8a87</GUID>
        <version>1</version>
        <description>FABtotum generic PLA profile.</description>
        <adhesion_info>Recommended nozzle temperature: 190...200C, bed temperature: 40...50C, layer fan: on, adhesion type: skirt.</adhesion_info>
    </metadata>
    <properties>
        <diameter>1.75</diameter>
        <density>1.24</density>
    </properties>
    <settings>
        <setting key="print temperature">200.0</setting>
        <setting key="heated bed temperature">40.0</setting>
    </settings>
</fdmmaterial>
0707010000000E000081A4000003E800000064000000015BE2BC8400000349000000000000000000000000000000000000003200000000fdm_materials-3.6.0/fabtotum_tpu.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>FABtotum</brand>
            <material>TPU</material>
            <color>Generic</color>
        </name>
        <GUID>97e6aaf1-0da2-47f8-a473-16b8b485bcf5</GUID>
        <version>1</version>
        <description>FABtotum TPU Black profile.</description>
        <adhesion_info>Recommended nozzle temperature: 210...220C, bed temperature: 40...50C, layer fan: on, adhesion type: skirt.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">220.0</setting>
        <setting key="heated bed temperature">40.0</setting>
    </settings>
</fdmmaterial>
0707010000000F000081A4000003E800000064000000015BE2BC8400000265000000000000000000000000000000000000003600000000fdm_materials-3.6.0/fiberlogy_hd_pla.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Fiberlogy HD</brand>
            <material>PLA</material>
            <color>Generic</color>
        </name>
        <GUID>78f8b7d3-e129-4ba3-bdb1-1c9eed8a923f</GUID>
        <version>1</version>
        <color_code>#dba500</color_code>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>1.74</diameter>
    </properties>
    <settings>
        <setting key="print temperature">210</setting>
    </settings>
</fdmmaterial>
07070100000010000081A4000003E800000064000000015BE2BC8400000366000000000000000000000000000000000000003000000000fdm_materials-3.6.0/filo3d_pla.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Filo3D</brand>
            <material>PLA</material>
            <color>Generic</color>
        </name>
        <GUID>cf078efd-d15d-4e6d-8f00-401b5e3f6d19</GUID>
        <version>1</version>
        <color_code>#ffc924</color_code>
        <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">205</setting>
    </settings>
</fdmmaterial>
07070100000011000081A4000003E800000064000000015BE2BC8400000364000000000000000000000000000000000000003600000000fdm_materials-3.6.0/filo3d_pla_green.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Filo3D</brand>
            <material>PLA</material>
            <color>Green</color>
        </name>
        <GUID>6a738af3-55ce-4467-b7e2-231a2db58bce</GUID>
        <version>1</version>
        <color_code>#61993b</color_code>
        <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">200</setting>
    </settings>
</fdmmaterial>
07070100000012000081A4000003E800000064000000015BE2BC8400000362000000000000000000000000000000000000003400000000fdm_materials-3.6.0/filo3d_pla_red.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Filo3D</brand>
            <material>PLA</material>
            <color>Red</color>
        </name>
        <GUID>92652f77-93fb-4139-abca-30658ec9e0f9</GUID>
        <version>1</version>
        <color_code>#bb1e10</color_code>
        <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">220</setting>
    </settings>
</fdmmaterial>
07070100000013000081A4000003E800000064000000015BE2BC840000111B000000000000000000000000000000000000003100000000fdm_materials-3.6.0/generic_abs.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>

<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Generic</brand>
            <material>ABS</material>
            <color>Generic</color>
        </name>
        <GUID>60636bb4-518f-42e7-8237-fe77b194ebe0</GUID>
        <version>13</version>
        <color_code>#8cb219</color_code>
        <description>Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC.</description>
        <adhesion_info>Use glue, to avoid chipping of the glass.</adhesion_info>
    </metadata>
    <properties>
        <density>1.10</density>
        <diameter>2.85</diameter>
    </properties>
    <settings>
        <setting key="print temperature">230</setting>
        <setting key="heated bed temperature">80</setting>
        <setting key="standby temperature">200</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">70</setting>
        <setting key="shrinkage percentage">0.9</setting>

</settings>
</fdmmaterial>
07070100000014000081A4000003E800000064000000015BE2BC84000008A6000000000000000000000000000000000000003500000000fdm_materials-3.6.0/generic_abs_175.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>

<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Generic</brand>
            <material>ABS</material>
            <color>Generic</color>
        </name>
        <GUID>2780b345-577b-4a24-a2c5-12e6aad3e690</GUID>
        <version>3</version>
        <color_code>#8cb219</color_code>
        <description>Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC.</description>
        <adhesion_info>Use glue, to avoid chipping of the glass.</adhesion_info>
    </metadata>
    <properties>
        <density>1.10</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">230</setting>
        <setting key="heated bed temperature">80</setting>
        <setting key="standby temperature">200</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">70</setting>

<machine>
            <machine_identifier manufacturer="Cartesio bv" product="cartesio" />
            <setting key="print cooling">0.0</setting>
            <setting key="standby temperature">160</setting>
            <setting key="retraction speed">40</setting>
            <setting key="heated bed temperature">90</setting>
            <setting key="print temperature">230</setting>
            <hotend id="0.25mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.0</setting>
            </hotend>
            <hotend id="0.4mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.0</setting>
            </hotend>
            <hotend id="0.8mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.5</setting>
            </hotend>
        </machine>
   </settings>
</fdmmaterial>
07070100000015000081A4000003E800000064000000015BE2BC8400000C9E000000000000000000000000000000000000003100000000fdm_materials-3.6.0/generic_bam.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>

<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Generic</brand>
            <material>Breakaway</material>
            <color>Generic</color>
        </name>
        <GUID>7e6207c4-22ff-441a-b261-ff89f166d6a0</GUID>
        <version>12</version>
        <color_code>#f1ece1</color_code> 
        <description>Breakaway Material. Breakaway is a matching support material for PLA, ABS, CPE, CPE+, and Nylon</description>
        <adhesion_info>same temperature/method as build material</adhesion_info> 
    </metadata>
    <properties>
        <density>1.22</density>
        <diameter>2.85</diameter>
    </properties>
    <settings>
        <setting key="print temperature">225</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">100</setting>

<machine>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker S5"/>
            <setting key="print cooling">100</setting>
            <hotend id="BB 0.4" />
            <hotend id="BB 0.8">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="CC 0.6" />
            <hotend id="AA 0.25">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="AA 0.4">
                <setting key="hardware compatible">yes</setting>
            </hotend>
            <hotend id="AA 0.8">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <buildplate id="Glass">
                <setting key="hardware compatible">yes</setting>
                <setting key="hardware recommended">no</setting>
            </buildplate>
            <buildplate id="Aluminum">
                <setting key="hardware compatible">yes</setting>
                <setting key="hardware recommended">no</setting>
            </buildplate>
        </machine>
    </settings>
</fdmmaterial>
07070100000016000081A4000003E800000064000000015BE2BC8400000E41000000000000000000000000000000000000003400000000fdm_materials-3.6.0/generic_cffcpe.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>

<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Generic</brand>
            <material>CFF CPE</material>
            <color>Generic</color>
        </name>
        <GUID>f8e496d6-7599-4015-9fac-c7ce53f6633c</GUID>
        <version>3</version>
        <color_code>#212F3D</color_code>
        <description>This is the baseline profile for Carbon Fiber Filled Copolyesters for the Print Profile Assistant. This profile can also be used for other base materials (ABS, PP, etc)</description>
        <adhesion_info>Use glue.</adhesion_info>
    </metadata>
    <properties>
        <density>1.35</density>
        <diameter>2.85</diameter>
    </properties>
    <settings>
        <setting key="print temperature">265</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">70</setting>

<machine>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker S5"/>
            <hotend id="AA 0.25">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="AA 0.4">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="AA 0.8">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="BB 0.4">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="BB 0.8">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="CC 0.6">
                <setting key="hardware compatible">yes</setting>
                <setting key="print cooling">50</setting>
                <setting key="retraction amount">6.5</setting>
            </hotend>
            <buildplate id="Glass">
                <setting key="hardware compatible">yes</setting>
                <setting key="hardware recommended">no</setting>
            </buildplate>
            <buildplate id="Aluminum">
                <setting key="hardware compatible">yes</setting>
                <setting key="hardware recommended">yes</setting>
            </buildplate>
        </machine>
    </settings>
</fdmmaterial>
07070100000017000081A4000003E800000064000000015BE2BC8400000DB0000000000000000000000000000000000000003300000000fdm_materials-3.6.0/generic_cffpa.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>

<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Generic</brand>
            <material>CFF PA</material>
            <color>Generic</color>
        </name>
        <GUID>bd66b243-9d50-4e12-bfc3-51c874fca16a</GUID>
        <version>3</version>
        <color_code>#212F3D</color_code>
        <description>This is the baseline profile for Carbon Fiber Filled Polyamides for the Print Profile Assistant.</description>
        <adhesion_info>Use glue.</adhesion_info>
    </metadata>
    <properties>
        <density>1.35</density>
        <diameter>2.85</diameter>
    </properties>
    <settings>
        <setting key="print temperature">265</setting>
        <setting key="heated bed temperature">70</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">2</setting>
        <setting key="surface energy">100</setting>

<machine>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker S5"/>
            <hotend id="AA 0.25">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="AA 0.4">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="AA 0.8">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="BB 0.4">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="BB 0.8">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="CC 0.6">
                <setting key="hardware compatible">yes</setting>
                <setting key="print cooling">1</setting>
                <setting key="retraction amount">6.5</setting>
            </hotend>
            <buildplate id="Glass">
                <setting key="hardware compatible">yes</setting>
                <setting key="hardware recommended">no</setting>
            </buildplate>
            <buildplate id="Aluminum">
                <setting key="hardware compatible">yes</setting>
                <setting key="hardware recommended">yes</setting>
            </buildplate>
        </machine>
    </settings>
</fdmmaterial>
07070100000018000081A4000003E800000064000000015BE2BC840000110C000000000000000000000000000000000000003100000000fdm_materials-3.6.0/generic_cpe.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>

<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Generic</brand>
            <material>CPE</material>
            <color>Generic</color>
        </name>
        <GUID>12f41353-1a33-415e-8b4f-a775a6c70cc6</GUID>
        <version>14</version>
        <color_code>#159499</color_code>
        <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
        <adhesion_info>Use glue.</adhesion_info>
    </metadata>
    <properties>
        <density>1.27</density>
        <diameter>2.85</diameter>
    </properties>
    <settings>
        <setting key="print temperature">240</setting>
        <setting key="heated bed temperature">70</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">70</setting>

<machine>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker S5"/>
            <hotend id="BB 0.4" />
            <hotend id="BB 0.8" />
            <hotend id="CC 0.6" />
            <hotend id="AA 0.25">
                <setting key="hardware compatible">yes</setting>
                <setting key="heated bed temperature">75</setting>
                <setting key="print temperature">230</setting>
                <setting key="standby temperature">100</setting>
                <setting key="retraction amount">6.5</setting>
            </hotend>
            <hotend id="AA 0.4">
                <setting key="hardware compatible">yes</setting>
                <setting key="heated bed temperature">75</setting>
                <setting key="standby temperature">100</setting>
                <setting key="retraction amount">8</setting>
                <setting key="retraction speed">40</setting>
                <setting key="print cooling">20</setting>
            </hotend>
            <hotend id="AA 0.8">
                <setting key="hardware compatible">yes</setting>
                <setting key="heated bed temperature">80</setting>
                <setting key="retraction amount">8</setting>
                <setting key="retraction speed">40</setting>
            </hotend>
            <buildplate id="Glass">
                <setting key="hardware compatible">no</setting>
                <setting key="hardware recommended">yes</setting>
            </buildplate>
            <buildplate id="Aluminum">
                <setting key="hardware compatible">yes</setting>
                <setting key="hardware recommended">yes</setting>
            </buildplate>
        </machine>
    </settings>
</fdmmaterial>
07070100000019000081A4000003E800000064000000015BE2BC8400000474000000000000000000000000000000000000003500000000fdm_materials-3.6.0/generic_cpe_175.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>

<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Generic</brand>
            <material>CPE</material>
            <color>Generic</color>
        </name>
        <GUID>da1872c1-b991-4795-80ad-bdac0f131726</GUID>
        <version>2</version>
        <color_code>#159499</color_code>
        <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
        <adhesion_info>Use glue.</adhesion_info>
    </metadata>
    <properties>
        <density>1.27</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">240</setting>
        <setting key="heated bed temperature">70</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">70</setting>
    </settings>
</fdmmaterial>
0707010000001A000081A4000003E800000064000000015BE2BC8400001107000000000000000000000000000000000000003600000000fdm_materials-3.6.0/generic_cpe_plus.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>

<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Generic</brand>
            <material>CPE+</material>
            <color>Generic</color>
        </name>
        <GUID>e2409626-b5a0-4025-b73e-b58070219259</GUID>
        <version>13</version>
        <color_code>#3633F2</color_code>
        <description>Chemically resistant and tough. CPE+ is chemically inert, tough, dimensionally stable and handles temperatures up to 100ºC.</description>
        <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints.</adhesion_info>
    </metadata>
    <properties>
        <density>1.18</density>
        <diameter>2.85</diameter>
    </properties>
    <settings>
        <setting key="print temperature">260</setting>
        <setting key="heated bed temperature">107</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">65</setting>
        <setting key="shrinkage percentage">0.9</setting>

<machine>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker S5"/>
            <hotend id="AA 0.25">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="AA 0.4">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="AA 0.8">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="BB 0.4">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="BB 0.8">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="CC 0.6">
                <setting key="hardware compatible">yes</setting>
                <setting key="print cooling">50</setting>
                <setting key="retraction amount">6.5</setting>
            </hotend>
            <buildplate id="Glass">
                <setting key="hardware compatible">yes</setting>
                <setting key="hardware recommended">no</setting>
            </buildplate>
            <buildplate id="Aluminum">
                <setting key="hardware compatible">yes</setting>
                <setting key="hardware recommended">yes</setting>
            </buildplate>
        </machine>
    </settings>
</fdmmaterial>
0707010000001C000081A4000003E800000064000000015BE2BC8400000DAE000000000000000000000000000000000000003300000000fdm_materials-3.6.0/generic_gffpa.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>

<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Generic</brand>
            <material>GFF PA</material>
            <color>Generic</color>
        </name>
        <GUID>837cf11b-6b1e-48dc-94dc-4a2b4888648e</GUID>
        <version>3</version>
        <color_code>#D5D8DC</color_code>
        <description>This is the baseline profile for Glass Fiber Filled Polyamides for the Print Profile Assistant.</description>
        <adhesion_info>Use glue.</adhesion_info>
    </metadata>
    <properties>
        <density>1.35</density>
        <diameter>2.85</diameter>
    </properties>
    <settings>
        <setting key="print temperature">265</setting>
        <setting key="heated bed temperature">70</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">2</setting>
        <setting key="surface energy">100</setting>

<machine>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker S5"/>
            <hotend id="AA 0.25">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="AA 0.4">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="AA 0.8">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="BB 0.4">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="BB 0.8">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="CC 0.6">
                <setting key="hardware compatible">yes</setting>
                <setting key="print cooling">1</setting>
                <setting key="retraction amount">6.5</setting>
            </hotend>
            <buildplate id="Glass">
                <setting key="hardware compatible">yes</setting>
                <setting key="hardware recommended">no</setting>
            </buildplate>
            <buildplate id="Aluminum">
                <setting key="hardware compatible">yes</setting>
                <setting key="hardware recommended">yes</setting>
            </buildplate>
        </machine>
    </settings>
</fdmmaterial>
0707010000001D000081A4000003E800000064000000015BE2BC8400000413000000000000000000000000000000000000003200000000fdm_materials-3.6.0/generic_hips.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>

<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Generic</brand>
            <material>HIPS</material>
            <color>Generic</color>
        </name>
        <GUID>b6f76172-bb0f-4326-bdbc-ee8f0e84b283</GUID>
        <version>2</version>
        <color_code>#12f3e0</color_code>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>2.85</diameter>
    </properties>
    <settings>
        <setting key="print temperature">225</setting>
        <setting key="heated bed temperature">85</setting>
        <setting key="standby temperature">160</setting>

<setting key="relative extrusion">1.0</setting>
        <setting key="flow sensor detection margin">0.8</setting>
        <setting key="retract compensation">0</setting>
  </settings>
</fdmmaterial>
0707010000001E000081A4000003E800000064000000015BE2BC8400000744000000000000000000000000000000000000003600000000fdm_materials-3.6.0/generic_hips_175.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>

<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Generic</brand>
            <material>HIPS</material>
            <color>Generic</color>
        </name>
        <GUID>a468d86a-220c-47eb-99a5-bbb47e514eb0</GUID>
        <version>2</version>
        <color_code>#12f3e0</color_code>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">215</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">160</setting>

<machine>
            <machine_identifier manufacturer="Cartesio bv" product="cartesio" />
            <setting key="print cooling">0.0</setting>
            <setting key="standby temperature">160</setting>
            <setting key="retraction speed">40</setting>
            <setting key="heated bed temperature">85</setting>
            <setting key="print temperature">225</setting>
            <hotend id="0.25mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.0</setting>
            </hotend>
            <hotend id="0.4mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.0</setting>
            </hotend>
            <hotend id="0.8mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.5</setting>
            </hotend>
       </machine>
    </settings>
</fdmmaterial>
0707010000001F000081A4000003E800000064000000015BE2BC84000010C5000000000000000000000000000000000000003300000000fdm_materials-3.6.0/generic_nylon.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>

<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Generic</brand>
            <material>Nylon</material>
            <color>Generic</color>
        </name>
        <GUID>28fb4162-db74-49e1-9008-d05f1e8bef5c</GUID>
        <version>11</version>
        <color_code>#3DF266</color_code>
        <description>Nylon is strong, abrasion-resistant, durable and engineered for low moisture sensitivity.</description>
        <adhesion_info>Use glue.</adhesion_info>
    </metadata>
    <properties>
        <density>1.14</density>
        <diameter>2.85</diameter>
    </properties>
    <settings>
        <setting key="print temperature">245</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="retraction amount">8</setting>
        <setting key="retraction speed">25</setting>
        <setting key="adhesion tendency">2</setting>
        <setting key="surface energy">100</setting>

<hotend id="BB 0.4" />
            <hotend id="BB 0.8" />
            <hotend id="CC 0.6" />
            <hotend id="AA 0.25">
                <setting key="hardware compatible">yes</setting>
                <setting key="print temperature">230</setting>
                <setting key="standby temperature">100</setting>
                <setting key="retraction amount">6.5</setting>
            </hotend>
            <hotend id="AA 0.4">
                <setting key="hardware compatible">yes</setting>
                <setting key="heated bed temperature">70</setting>
                <setting key="retraction amount">8</setting>
            </hotend>
            <hotend id="AA 0.8">
                <setting key="hardware compatible">yes</setting>
                <setting key="heated bed temperature">70</setting>
                <setting key="retraction amount">8</setting>
                <setting key="retraction speed">45</setting>
            </hotend>
            <buildplate id="Glass">
                <setting key="hardware compatible">yes</setting>
                <setting key="hardware recommended">yes</setting>
            </buildplate>
            <buildplate id="Aluminum">
                <setting key="hardware compatible">no</setting>
                <setting key="hardware recommended">no</setting>
            </buildplate>
        </machine>
    </settings>
</fdmmaterial>
07070100000020000081A4000003E800000064000000015BE2BC84000008CF000000000000000000000000000000000000003700000000fdm_materials-3.6.0/generic_nylon_175.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>

<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Generic</brand>
            <material>Nylon</material>
            <color>Generic</color>
        </name>
        <GUID>283d439a-3490-4481-920c-c51d8cdecf9c</GUID>
        <version>3</version>
        <color_code>#3DF266</color_code>
        <description>Nylon is strong, abrasion-resistant, durable and engineered for low moisture sensitivity.</description>
        <adhesion_info>Use glue.</adhesion_info>
    </metadata>
    <properties>
        <density>1.14</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">245</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="retraction amount">8</setting>
        <setting key="retraction speed">25</setting>
        <setting key="adhesion tendency">2</setting>
        <setting key="surface energy">100</setting>
        
        <machine>
            <machine_identifier manufacturer="Cartesio bv" product="cartesio" />
            <setting key="print cooling">0.0</setting>
            <setting key="standby temperature">160</setting>
            <setting key="retraction speed">40</setting>
            <setting key="heated bed temperature">60</setting>
            <setting key="print temperature">230</setting>
            <hotend id="0.25mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.0</setting>
            </hotend>
            <hotend id="0.4mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.0</setting>
            </hotend>
            <hotend id="0.8mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.5</setting>
            </hotend>
       </machine>
    </settings>
</fdmmaterial>
07070100000021000081A4000003E800000064000000015BE2BC8400001575000000000000000000000000000000000000003000000000fdm_materials-3.6.0/generic_pc.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>

<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Generic</brand>
            <material>PC</material>
            <color>Generic</color>
        </name>
        <GUID>98c05714-bf4e-4455-ba27-57d74fe331e4</GUID>
        <version>14</version>
        <color_code>#F29030</color_code>
        <description>Strong, tough and temperature resistant. PC offers a great print quality, heat resistance up to 110ºC, mechanical strength and toughness.</description>
        <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints. Set your print speed to a low value (10mm/sec) to get better layer bonding.</adhesion_info>
    </metadata>
    <properties>
        <density>1.19</density>
        <diameter>2.85</diameter>
    </properties>
    <settings>
        <setting key="print temperature">270</setting>
        <setting key="heated bed temperature">107</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">65</setting>
        <setting key="shrinkage percentage">0.7</setting>

<machine>
           <machine_identifier manufacturer="Cartesio bv" product="cartesio" />
           <setting key="print cooling">0.0</setting>
           <setting key="standby temperature">160</setting>
           <setting key="retraction speed">40</setting>
           <setting key="heated bed temperature">135</setting>
           <setting key="print temperature">245</setting>
           <hotend id="0.25mm thermoplastic extruder">
               <setting key="hardware compatible">yes</setting>
               <setting key="retraction amount">1.0</setting>
           </hotend>
           <hotend id="0.4mm thermoplastic extruder">
               <setting key="hardware compatible">yes</setting>
               <setting key="retraction amount">1.0</setting>
           </hotend>
           <hotend id="0.8mm thermoplastic extruder">
               <setting key="hardware compatible">yes</setting>
               <setting key="retraction amount">1.5</setting>
           </hotend>
       </machine>
    </settings>
</fdmmaterial>
07070100000022000081A4000003E800000064000000015BE2BC84000008AC000000000000000000000000000000000000003400000000fdm_materials-3.6.0/generic_pc_175.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>

<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Generic</brand>
            <material>PC</material>
            <color>Generic</color>
        </name>
        <GUID>62414577-94d1-490d-b1e4-7ef3ec40db02</GUID>
        <version>3</version>
        <color_code>#F29030</color_code>
        <description>Strong, tough and temperature resistant. PC offers a great print quality, heat resistance up to 110ºC, mechanical strength and toughness.</description>
        <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints. Set your print speed to a low value (10mm/sec) to get better layer bonding.</adhesion_info>
    </metadata>
    <properties>
        <density>1.19</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">270</setting>
        <setting key="heated bed temperature">107</setting>
        <setting key="standby temperature">175</setting>

<machine>
            <machine_identifier manufacturer="Cartesio bv" product="cartesio" />
            <setting key="print cooling">0.0</setting>
            <setting key="standby temperature">160</setting>
            <setting key="retraction speed">40</setting>
            <setting key="heated bed temperature">135</setting>
            <setting key="print temperature">245</setting>
            <hotend id="0.25mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.0</setting>
            </hotend>
            <hotend id="0.4mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.0</setting>
            </hotend>
            <hotend id="0.8mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.5</setting>
            </hotend>
        </machine>
    </settings>
</fdmmaterial>
07070100000023000081A4000003E800000064000000015BE2BC840000062A000000000000000000000000000000000000003200000000fdm_materials-3.6.0/generic_petg.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>

<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Generic</brand>
            <material>PETG</material>
            <color>Generic</color>
        </name>
        <GUID>1cbfaeb3-1906-4b26-b2e7-6f777a8c197a</GUID>
        <version>2</version>
        <color_code>#ff5086</color_code>
        <description>Generic PETG profile. The data in this file may not be correct for your specific machine.</description>
        <adhesion_info>Set your prime speed to a low value (8mm/sec)</adhesion_info>
    </metadata>
    <properties>
        <density>1.38</density>
        <diameter>2.85</diameter>
    </properties>
    <settings>
        <setting key="print temperature">215</setting>
        <setting key="heated bed temperature">70</setting>
        <setting key="standby temperature">120</setting>

<hotend id="0.4 mm" />
            <hotend id="0.4 mm 2-fans" />
        </machine>
    </settings>
</fdmmaterial>
07070100000024000081A4000003E800000064000000015BE2BC8400000962000000000000000000000000000000000000003600000000fdm_materials-3.6.0/generic_petg_175.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>

<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Generic</brand>
            <material>PETG</material>
            <color>Generic</color>
        </name>
        <GUID>69386c85-5b6c-421a-bec5-aeb1fb33f060</GUID>
        <version>2</version>
        <color_code>#f3a112</color_code>
        <description>Generic PETG profile. The data in this file may not be correct for your specific machine.</description>
        <adhesion_info>Set your prime speed to a low value (8mm/sec)</adhesion_info>
    </metadata>
    <properties>
        <density>1.38</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">215</setting>
        <setting key="heated bed temperature">70</setting>
        <setting key="standby temperature">120</setting>

<hotend id="0.4 mm" />
            <hotend id="0.4 mm 2-fans" />
        </machine>
        
        <machine>
            <machine_identifier manufacturer="Cartesio bv" product="cartesio" />
            <setting key="print cooling">0.0</setting>
            <setting key="standby temperature">120</setting>
            <setting key="retraction speed">40</setting>
            <setting key="heated bed temperature">85</setting>
            <setting key="print temperature">215</setting>
            <hotend id="0.25mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.0</setting>
            </hotend>
            <hotend id="0.4mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.0</setting>
            </hotend>
            <hotend id="0.8mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.5</setting>
            </hotend>
        </machine>
    </settings>
</fdmmaterial>
07070100000025000081A4000003E800000064000000015BE2BC8400001477000000000000000000000000000000000000003100000000fdm_materials-3.6.0/generic_pla.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>

<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Generic</brand>
            <material>PLA</material>
            <color>Generic</color>
        </name>
        <GUID>506c9f0d-e3aa-4bd4-b2d2-23e2425b1aa9</GUID>
        <version>12</version>
        <color_code>#ffc924</color_code>
        <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>2.85</diameter>
    </properties>
    <settings>
        <setting key="print temperature">200</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">100</setting>

<hotend id="0.4 mm" />
            <hotend id="0.4 mm 2-fans" />
        </machine>
    </settings>
</fdmmaterial>
07070100000026000081A4000003E800000064000000015BE2BC84000009FF000000000000000000000000000000000000003500000000fdm_materials-3.6.0/generic_pla_175.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>

<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Generic</brand>
            <material>PLA</material>
            <color>Generic</color>
        </name>
        <GUID>0ff92885-617b-4144-a03c-9989872454bc</GUID>
        <version>3</version>
        <color_code>#ffc924</color_code>
        <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">200</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">100</setting>

<hotend id="0.4 mm" />
            <hotend id="0.4 mm 2-fans" />
        </machine>
        
        <machine>
            <machine_identifier manufacturer="Cartesio bv" product="cartesio" />
            <setting key="print cooling">40.0</setting>
            <setting key="standby temperature">160</setting>
            <setting key="retraction speed">40</setting>
            <setting key="heated bed temperature">50</setting>
            <setting key="print temperature">185</setting>
            <hotend id="0.25mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.0</setting>
            </hotend>
            <hotend id="0.4mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.0</setting>
            </hotend>
            <hotend id="0.8mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.5</setting>
            </hotend>
        </machine>
    </settings>
</fdmmaterial>
07070100000027000081A4000003E800000064000000015BE2BC840000117F000000000000000000000000000000000000003000000000fdm_materials-3.6.0/generic_pp.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>

<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Generic</brand>
            <material>PP</material>
            <color>Generic</color>
        </name>
        <GUID>aa22e9c7-421f-4745-afc2-81851694394a</GUID>
        <version>14</version>
        <color_code>#85f9de</color_code>
        <description>Fatigue and chemical resistant. Polypropylene offers excellent temperature, chemical and fatigue resistance. Its toughness and low friction make it a perfect choice for prototyping and creating durable end-use models.</description>
        <adhesion_info>Adhesion sheets are required.</adhesion_info>
    </metadata>
    <properties>
        <diameter>2.85</diameter>
        <density>0.89</density>
    </properties>
    <settings>
        <setting key="print temperature">220</setting>
        <setting key="heated bed temperature">100</setting>
        <setting key="standby temperature">185</setting>
        <setting key="print cooling">20</setting>
        <setting key="retraction speed">35</setting>
        <setting key="shrinkage percentage">2.5</setting>

<machine>
            <machine_identifier manufacturer="Cartesio bv" product="cartesio" />
            <setting key="print cooling">0.0</setting>
            <setting key="standby temperature">160</setting>
            <setting key="retraction speed">40</setting>
            <setting key="heated bed temperature">50</setting>
            <setting key="print temperature">205</setting>
            <hotend id="0.25mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.0</setting>
            </hotend>
            <hotend id="0.4mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.0</setting>
            </hotend>
            <hotend id="0.8mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.5</setting>
            </hotend>
        </machine>
    </settings>
</fdmmaterial>
07070100000029000081A4000003E800000064000000015BE2BC84000007EF000000000000000000000000000000000000003500000000fdm_materials-3.6.0/generic_pva_175.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>

<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Generic</brand>
            <material>PVA</material>
            <color>Generic</color>
        </name>
        <GUID>a4255da2-cb2a-4042-be49-4a83957a2f9a</GUID>
        <version>4</version>
        <color_code>#a32bcc</color_code>
        <description>Water soluble support material. PVA is a matching support material for PLA, CPE and Nylon.</description>
        <adhesion_info>Use the same temperatures and adhesion method as your build material(s).</adhesion_info>
    </metadata>
    <properties>
        <density>1.23</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">215</setting>
        <setting key="standby temperature">175</setting>

<machine>
            <machine_identifier manufacturer="Cartesio bv" product="cartesio" />
            <setting key="print cooling">0.0</setting>
            <setting key="standby temperature">160</setting>
            <setting key="retraction speed">40</setting>
            <setting key="heated bed temperature">50</setting>
            <setting key="print temperature">205</setting>
            <hotend id="0.25mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.0</setting>
            </hotend>
            <hotend id="0.4mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.0</setting>
            </hotend>
            <hotend id="0.8mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.5</setting>
            </hotend>
        </machine>
    </settings>
</fdmmaterial>
0707010000002A000081A4000003E800000064000000015BE2BC8400000E2B000000000000000000000000000000000000003700000000fdm_materials-3.6.0/generic_tough_pla.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>

<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Generic</brand>
            <material>Tough PLA</material>
            <color>Generic</color>
        </name>
        <GUID>9d5d2d7c-4e77-441c-85a0-e9eefd4aa68c</GUID>
        <version>7</version>
        <color_code>#ffc9f0</color_code>
        <description>Technical PLA material with toughness similar to ABS. Ideal for reliably printing functional prototypes and tooling at larger sizes, Tough PLA offers the same safe and easy use as regular PLA.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>2.85</diameter>
    </properties>
    <settings>
        <setting key="print temperature">225</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">100</setting>

<machine>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker S5"/>
            <setting key="print cooling">100</setting>
            <hotend id="BB 0.4" />
            <hotend id="BB 0.8" />
            <hotend id="AA 0.25">
                <setting key="hardware compatible">yes</setting>
                <setting key="standby temperature">100</setting>
                <setting key="retraction amount">6.5</setting>
            </hotend>
            <hotend id="AA 0.4">
                <setting key="hardware compatible">yes</setting>
            </hotend>
            <hotend id="AA 0.8">
                <setting key="hardware compatible">yes</setting>
                <setting key="standby temperature">100</setting>
                <setting key="retraction amount">5</setting>
            </hotend>
            <buildplate id="Glass">
                <setting key="hardware compatible">yes</setting>
                <setting key="hardware recommended">yes</setting>
            </buildplate>
            <buildplate id="Aluminum">
                <setting key="hardware compatible">yes</setting>
                <setting key="hardware recommended">no</setting>
            </buildplate>
        </machine>
    </settings>
</fdmmaterial>
0707010000002B000081A4000003E800000064000000015BE2BC84000010C9000000000000000000000000000000000000003100000000fdm_materials-3.6.0/generic_tpu.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>

<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Generic</brand>
            <material>TPU 95A</material>
            <color>Generic</color>
        </name>
        <GUID>1d52b2be-a3a2-41de-a8b1-3bcdb5618695</GUID>
        <version>11</version>
        <color_code>#B22744</color_code>
        <description>Wear and tear resistant. TPU features a Shore-A hardness of 95 and an elongation of up to 580% at break. Suitable for applications that require slight flexibility, wear and tear, and chemical resistance.</description>
        <adhesion_info>Use glue.</adhesion_info>
    </metadata>
    <properties>
        <density>1.22</density>
        <diameter>2.85</diameter>
    </properties>
    <settings>
        <setting key="print temperature">228</setting>
        <setting key="heated bed temperature">0</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">3</setting>
        <setting key="surface energy">100</setting>

</machine>
    </settings>
</fdmmaterial>
0707010000002D000081A4000003E800000064000000015BE2BC8400000362000000000000000000000000000000000000003700000000fdm_materials-3.6.0/imade3d_petg_pink.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>IMADE3D</brand>
            <material>PETG</material>
            <color>Pink</color>
        </name>
        <GUID>ba534364-680d-49ed-b2a3-46c502093135</GUID>
        <version>1</version>
        <color_code>#eb006a</color_code>
    </metadata>
    <properties>
        <density>1.38</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">235</setting>
        <setting key="heated bed temperature">50</setting>

</machine>
    </settings>
</fdmmaterial>
0707010000002E000081A4000003E800000064000000015BE2BC8400000469000000000000000000000000000000000000003700000000fdm_materials-3.6.0/imade3d_pla_green.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>IMADE3D</brand>
            <material>PLA</material>
            <color>Green</color>
        </name>
        <GUID>d5572db9-0f37-47c0-aac5-84541b9ee8c2</GUID>
        <version>1</version>
        <color_code>#a5da00</color_code>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>1.75</diameter>
        <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </properties>
    <settings>
        <setting key="print temperature">210</setting>
        <setting key="heated bed temperature">50</setting>

</machine>
    </settings>
</fdmmaterial>
0707010000002F000081A4000003E800000064000000015BE2BC8400000468000000000000000000000000000000000000003600000000fdm_materials-3.6.0/imade3d_pla_pink.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>IMADE3D</brand>
            <material>PLA</material>
            <color>Pink</color>
        </name>
        <GUID>2ea65303-590f-40e6-8851-348219836860</GUID>
        <version>1</version>
        <color_code>#eb006a</color_code>
        <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">210</setting>
        <setting key="heated bed temperature">50</setting>

</machine>
    </settings>
</fdmmaterial>
07070100000030000081A4000003E800000064000000015BE2BC84000002D8000000000000000000000000000000000000003D00000000fdm_materials-3.6.0/innofill_innoflex60_175.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Innofill</brand>
            <material>Innoflex 60</material>
            <color>Generic</color>
        </name>
        <GUID>093c0407-a7ab-4772-a2a1-4c52677f11d3</GUID>
        <version>2</version>
        <color_code>#ecece7</color_code>
        <description>Shore-A hardness of 60. Suitable for applications that require flexibility.</description>
    </metadata>
    <properties>
        <density>1.23</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">220</setting>
    </settings>
</fdmmaterial>
07070100000031000081A4000003E800000064000000015BE2BC8400000369000000000000000000000000000000000000003300000000fdm_materials-3.6.0/octofiber_pla.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>OctoFiber</brand>
            <material>PLA</material>
            <color>Generic</color>
        </name>
        <GUID>f7aaa835-b1ca-44b1-a35a-746031d3076f</GUID>
        <version>1</version>
        <color_code>#ffc924</color_code>
        <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>1.74</diameter>
    </properties>
    <settings>
        <setting key="print temperature">210</setting>
    </settings>
</fdmmaterial>
07070100000032000081A4000003E800000064000000015BE2BC8400000286000000000000000000000000000000000000003200000000fdm_materials-3.6.0/polyflex_pla.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Polymaker</brand>
            <label>PolyFlex</label>
            <material>PLA</material>
            <color>Generic</color>
        </name>
        <GUID>88924e7b-a124-418f-a9b5-9fa56dbc47a3</GUID>
        <version>1</version>
        <color_code>#ffc924</color_code>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">230</setting>
    </settings>
</fdmmaterial>
07070100000033000081A4000003E800000064000000015BE2BC840000038C000000000000000000000000000000000000003100000000fdm_materials-3.6.0/polymax_pla.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Polymaker</brand>
            <label>PolyMax</label>
            <material>PLA</material>
            <color>Generic</color>
        </name>
        <GUID>4cf5cf01-76b2-43d9-93f0-3b713d5730a8</GUID>
        <version>1</version>
        <color_code>#ffc924</color_code>
        <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">210</setting>
    </settings>
</fdmmaterial>
07070100000034000081A4000003E800000064000000015BE2BC840000038D000000000000000000000000000000000000003200000000fdm_materials-3.6.0/polyplus_pla.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Polymaker</brand>
            <label>PolyPlus</label>
            <material>PLA</material>
            <color>Generic</color>
        </name>
        <GUID>5b4745da-5b2e-4f3c-bd6c-3d760b9aaef8</GUID>
        <version>1</version>
        <color_code>#ffc924</color_code>
        <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">210</setting>
    </settings>
</fdmmaterial>
07070100000035000081A4000003E800000064000000015BE2BC8400000286000000000000000000000000000000000000003200000000fdm_materials-3.6.0/polywood_pla.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Polymaker</brand>
            <label>PolyWood</label>
            <material>PLA</material>
            <color>Generic</color>
        </name>
        <GUID>adda5a78-f1e8-42e5-8837-6d6e6297dfa9</GUID>
        <version>1</version>
        <color_code>#ffeecc</color_code>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">210</setting>
    </settings>
</fdmmaterial>
07070100000036000041ED000003E800000064000000025BE2BC8400000000000000000000000000000000000000000000001C00000000fdm_materials-3.6.0/scripts07070100000037000081ED000003E800000064000000015BE2BC8400000C20000000000000000000000000000000000000003700000000fdm_materials-3.6.0/scripts/check_material_profiles.py#!/usr/bin/env python
from collections import OrderedDict
import os
import sys
import re

class MaterialProfilesValidator:

def __init__(self, root_dir: str):
        self._repo_dir = os.path.abspath(root_dir)
        self._materials_dir = self._repo_dir

self._guid_pattern = re.compile(r"<GUID>.*</GUID>")

def _get_guid(self, content: str) -> str:
        guid = None
        for line in content.splitlines():
            line = line.strip()
            if self._guid_pattern.match(line):
                guid = line.strip("<GUID>").strip("</GUID>")
                break
        return guid

def get_materials_dir(self, dirpath: str):
        for root_dir, dirnames, filenames in os.walk(dirpath):
            has_materials_file = any(fn.endswith(".xml.fdm_material") for fn in filenames)
            if not has_materials_file:
                for dirname in dirnames:
                    full_dir_path = os.path.join(root_dir, dirname)
                    return self.get_materials_dir(full_dir_path)

return dirpath

def validate(self) -> bool:
        """
        Validates the preset settings files and returns True or False indicating whether there are invalid files.
        """
        # parse the definition file
        guid_dict = OrderedDict()

materials_dir = self.get_materials_dir(self._materials_dir)

# go through all the preset settings files
        for _, _, filenames in os.walk(materials_dir):
            for filename in filenames:
                file_path = os.path.join(materials_dir, filename)
                if not filename.endswith(".xml.fdm_material"):
                    print("Skipping \"%s\"" % filename)
                    continue

with open(file_path, "r", encoding = "utf-8") as f:
                    content = f.read()

guid = self._get_guid(content)
                if guid not in guid_dict:
                    guid_dict[guid] = []

item_list = guid_dict[guid]
                item_list.append({"file_name": filename,
                                  "file_path": file_path})
            break

has_invalid_files = False
        for guid, file_item_list in guid_dict.items():
            if len(file_item_list) <= 1:
                continue
            has_invalid_files = True

if guid is not None:
                print("-> The following files contain the same GUID [%s]:" % guid)
            else:
                print("-> The following files DO NOT contain any GUID:")
            for file_item in file_item_list:
                print("    -- [%s]" % file_item["file_name"])
            print("-> PLEASE make sure to generate unique GUIDs for each material.")

return not has_invalid_files

if __name__ == "__main__":
    script_dir = os.path.dirname(os.path.realpath(__file__))
    root_dir = os.path.abspath(os.path.join(script_dir, ".."))

validator = MaterialProfilesValidator(root_dir)
    is_everything_validate = validator.validate()

ret_code = 0 if is_everything_validate else 1
    sys.exit(ret_code)
07070100000038000081ED000003E800000064000000015BE2BC84000002C0000000000000000000000000000000000000003500000000fdm_materials-3.6.0/scripts/update_version_by_one.py#!/usr/bin/env python
import os
import sys

if __name__ == '__main__':
    for filename in sys.argv[1:]:
        with open(filename, 'r', encoding='utf-8') as f:
            lines = f.readlines()
        for i, line in enumerate(lines):
            if "<version>" in line.strip() and "</version>" in line.strip():
                idx = line.find("<version>") + len("<version>")
                idx2 = line.find("</version>")
                num = int(line[idx:idx2])
                num += 1
                new_line = line[:idx] + str(num) + line[idx2:]
                lines[i] = new_line
                break
        with open(filename, 'w', encoding='utf-8') as f:
            f.writelines(lines)

07070100000039000081A4000003E800000064000000015BE2BC8400000813000000000000000000000000000000000000002F00000000fdm_materials-3.6.0/tizyx_abs.xml.fdm_material<?xml version='1.0' encoding='utf-8'?>
<fdmmaterial version="1.3" xmlns="http://www.ultimaker.com/material">
  <metadata>
    <name>
      <brand>TiZYX</brand>
      <material>ABS</material>
      <color>Generic</color>
      <label>ABS TiZYX</label>
    </name>
    <version>2</version>
    <color_code>#0097e8</color_code>
    <compatible>True</compatible>
    <GUID>ae03b4fd-2aa6-4957-aaea-b7ca0bbf0370</GUID>
    <adhesion_info>Use glue, to avoid chipping of the glass.</adhesion_info>
    <description>Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC.</description>
  </metadata>
  <properties>
    <diameter>1.75</diameter>
    <density>1.10</density>
  </properties>
  <settings>
    <setting key="print temperature">235.0</setting>
    <setting key="standby temperature">200</setting>
    <setting key="print cooling">10.0</setting>
    <setting key="heated bed temperature">95.0</setting>
    <setting key="retraction amount">2.5</setting>
    <machine>
      <machine_identifier manufacturer="Cartesio bv" product="cartesio" />
      <setting key="heated bed temperature">90</setting>
      <setting key="print temperature">230</setting>
      <setting key="standby temperature">160</setting>
      <setting key="print cooling">0.0</setting>
      <setting key="retraction speed">40</setting>
      <setting key="retraction amount">4.0</setting>
      <hotend id="0.4mm thermoplastic extruder">
        <setting key="hardware compatible">yes</setting>
        <setting key="retraction amount">1.0</setting>
      </hotend>
      <hotend id="0.25mm thermoplastic extruder">
        <setting key="hardware compatible">yes</setting>
        <setting key="retraction amount">1.0</setting>
      </hotend>
      <hotend id="0.8mm thermoplastic extruder">
        <setting key="hardware compatible">yes</setting>
        <setting key="retraction amount">1.5</setting>
      </hotend>
    </machine>
  </settings>
</fdmmaterial>
0707010000003A000081A4000003E800000064000000015BE2BC8400000A12000000000000000000000000000000000000002F00000000fdm_materials-3.6.0/tizyx_pla.xml.fdm_material<?xml version='1.0' encoding='utf-8'?>
<fdmmaterial version="1.3" xmlns="http://www.ultimaker.com/material">
  <metadata>
    <name>
      <brand>TiZYX</brand>
      <material>PLA</material>
      <color>toutes couleurs</color>
      <label>PLA TiZYX</label>
    </name>
    <version>2</version>
    <color_code>#20ffff</color_code>
    <compatible>True</compatible>
    <GUID>2b61d300-bf30-4780-a9ae-40c86d865f87</GUID>
    <adhesion_info>se décolle facilement à l'aide d'un support flexible</adhesion_info>
    <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
  </metadata>
  <properties>
    <diameter>1.75</diameter>
    <density>1.24</density>
  </properties>
  <settings>
    <setting key="retraction speed">25.0</setting>
    <setting key="print temperature">200</setting>
    <setting key="standby temperature">200.0</setting>
    <setting key="heated bed temperature">60</setting>
    <setting key="retraction amount">2.5</setting>
    <machine>
      <machine_identifier manufacturer="Cartesio bv" product="cartesio" />
      <setting key="heated bed temperature">50</setting>
      <setting key="print temperature">185</setting>
      <setting key="standby temperature">160</setting>
      <setting key="print cooling">40.0</setting>
      <setting key="retraction speed">40</setting>
      <setting key="retraction amount">1.0</setting>
      <hotend id="0.4mm thermoplastic extruder">
        <setting key="hardware compatible">yes</setting>
      </hotend>
      <hotend id="0.25mm thermoplastic extruder">
        <setting key="hardware compatible">yes</setting>
      </hotend>
      <hotend id="0.8mm thermoplastic extruder">
        <setting key="hardware compatible">yes</setting>
        <setting key="retraction amount">1.5</setting>
      </hotend>
    </machine>
    <machine>
      <machine_identifier manufacturer="IMADE3D" product="IMADE3D JellyBOX" />
      <setting key="heated bed temperature">55</setting>
      <setting key="print temperature">210</setting>
      <setting key="standby temperature">175</setting>
      <setting key="retraction speed">10.0</setting>
      <setting key="retraction amount">1.0</setting>
      <hotend id="0.4 mm 2-fans">
        <setting key="hardware compatible">yes</setting>
      </hotend>
      <hotend id="0.4 mm">
        <setting key="hardware compatible">yes</setting>
      </hotend>
    </machine>
  </settings>
</fdmmaterial>
0707010000003B000081A4000003E800000064000000015BE2BC840000096B000000000000000000000000000000000000003400000000fdm_materials-3.6.0/tizyx_pla_bois.xml.fdm_material<?xml version='1.0' encoding='utf-8'?>
<fdmmaterial version="1.3" xmlns="http://www.ultimaker.com/material">
  <metadata>
    <name>
      <brand>TiZYX</brand>
      <material>PLA Bois</material>
      <color>bois</color>
      <label>Bois TiZYX</label>
    </name>
    <version>2</version>
    <color_code>#ac7300</color_code>
    <compatible>True</compatible>
    <GUID>60e6c0e4-b22f-42d7-9807-aef7f0c6fee7</GUID>
    <adhesion_info>se décolle facilement à l'aide d'un support flexible</adhesion_info>
    <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
  </metadata>
  <properties>
    <diameter>1.75</diameter>
    <density>1.24</density>
  </properties>
  <settings>
    <setting key="retraction speed">10.0</setting>
    <setting key="print temperature">200</setting>
    <setting key="standby temperature">200.0</setting>
    <setting key="heated bed temperature">60</setting>
    <setting key="retraction amount">1.0</setting>
    <machine>
      <machine_identifier manufacturer="Cartesio bv" product="cartesio" />
      <setting key="heated bed temperature">50</setting>
      <setting key="print temperature">185</setting>
      <setting key="standby temperature">160</setting>
      <setting key="print cooling">40.0</setting>
      <setting key="retraction speed">40</setting>
      <hotend id="0.4mm thermoplastic extruder">
        <setting key="hardware compatible">yes</setting>
      </hotend>
      <hotend id="0.25mm thermoplastic extruder">
        <setting key="hardware compatible">yes</setting>
      </hotend>
      <hotend id="0.8mm thermoplastic extruder">
        <setting key="hardware compatible">yes</setting>
        <setting key="retraction amount">1.5</setting>
      </hotend>
    </machine>
    <machine>
      <machine_identifier manufacturer="IMADE3D" product="IMADE3D JellyBOX" />
      <setting key="heated bed temperature">55</setting>
      <setting key="print temperature">210</setting>
      <setting key="standby temperature">175</setting>
      <hotend id="0.4 mm 2-fans">
        <setting key="hardware compatible">yes</setting>
      </hotend>
      <hotend id="0.4 mm">
        <setting key="hardware compatible">yes</setting>
      </hotend>
    </machine>
  </settings>
</fdmmaterial>
0707010000003C000081A4000003E800000064000000015BE2BC84000010D5000000000000000000000000000000000000003900000000fdm_materials-3.6.0/ultimaker_abs_black.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>ABS</material>
            <color>Black</color>
        </name>
        <GUID>2f9d2279-9b0e-4765-bf9b-d1e1e13f3c49</GUID>
        <version>14</version>
        <color_code>#2a292a</color_code>
        <description>Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC.</description>
        <adhesion_info>Use glue, to avoid chipping of the glass.</adhesion_info>
    </metadata>
    <properties>
        <density>1.10</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">230</setting>
        <setting key="heated bed temperature">80</setting>
        <setting key="standby temperature">200</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">70</setting>
        <setting key="shrinkage percentage">0.9</setting>

07070100000040000081A4000003E800000064000000015BE2BC84000010D7000000000000000000000000000000000000003A00000000fdm_materials-3.6.0/ultimaker_abs_orange.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>ABS</material>
            <color>Orange</color>
        </name>
        <GUID>0b4ca6ef-eac8-4b23-b3ca-5f21af00e54f</GUID>
        <version>14</version>
        <color_code>#ed6b21</color_code>
        <description>Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC.</description>
        <adhesion_info>Use glue, to avoid chipping of the glass.</adhesion_info>
    </metadata>
    <properties>
        <density>1.10</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">230</setting>
        <setting key="heated bed temperature">80</setting>
        <setting key="standby temperature">200</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">70</setting>
        <setting key="shrinkage percentage">0.9</setting>

07070100000041000081A4000003E800000064000000015BE2BC84000010DB000000000000000000000000000000000000003E00000000fdm_materials-3.6.0/ultimaker_abs_pearl-gold.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>ABS</material>
            <color>Pearl Gold</color>
        </name>
        <GUID>7cbdb9ca-081a-456f-a6ba-f73e4e9cb856</GUID>
        <version>14</version>
        <color_code>#80643f</color_code>
        <description>Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC.</description>
        <adhesion_info>Use glue, to avoid chipping of the glass.</adhesion_info>
    </metadata>
    <properties>
        <density>1.10</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">230</setting>
        <setting key="heated bed temperature">80</setting>
        <setting key="standby temperature">200</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">70</setting>
        <setting key="shrinkage percentage">0.9</setting>

07070100000042000081A4000003E800000064000000015BE2BC84000010D4000000000000000000000000000000000000003700000000fdm_materials-3.6.0/ultimaker_abs_red.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>ABS</material>
            <color>Red</color>
        </name>
        <GUID>5df7afa6-48bd-4c19-b314-839fe9f08f1f</GUID>
        <version>14</version>
        <color_code>#bb1e10</color_code>
        <description>Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC.</description>
        <adhesion_info>Use glue, to avoid chipping of the glass.</adhesion_info>
    </metadata>
    <properties>
        <density>1.10</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">230</setting>
        <setting key="heated bed temperature">80</setting>
        <setting key="standby temperature">200</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">70</setting>
        <setting key="shrinkage percentage">0.9</setting>

07070100000043000081A4000003E800000064000000015BE2BC84000010E0000000000000000000000000000000000000004300000000fdm_materials-3.6.0/ultimaker_abs_silver-metallic.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>ABS</material>
            <color>Silver Metallic</color>
        </name>
        <GUID>763c926e-a5f7-4ba0-927d-b4e038ea2735</GUID>
        <version>14</version>
        <color_code>#a1a1a0</color_code>
        <description>Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC.</description>
        <adhesion_info>Use glue, to avoid chipping of the glass.</adhesion_info>
    </metadata>
    <properties>
        <density>1.10</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">230</setting>
        <setting key="heated bed temperature">80</setting>
        <setting key="standby temperature">200</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">70</setting>
        <setting key="shrinkage percentage">0.9</setting>

07070100000044000081A4000003E800000064000000015BE2BC84000010D6000000000000000000000000000000000000003900000000fdm_materials-3.6.0/ultimaker_abs_white.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>ABS</material>
            <color>White</color>
        </name>
        <GUID>5253a75a-27dc-4043-910f-753ae11bc417</GUID>
        <version>14</version>
        <color_code>#ecece7</color_code>
        <description>Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC.</description>
        <adhesion_info>Use glue, to avoid chipping of the glass.</adhesion_info>
    </metadata>
    <properties>
        <density>1.10</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">230</setting>
        <setting key="heated bed temperature">80</setting>
        <setting key="standby temperature">200</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">70</setting>
        <setting key="shrinkage percentage">0.9</setting>

07070100000045000081A4000003E800000064000000015BE2BC84000010D7000000000000000000000000000000000000003A00000000fdm_materials-3.6.0/ultimaker_abs_yellow.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>ABS</material>
            <color>Yellow</color>
        </name>
        <GUID>e873341d-d9b8-45f9-9a6f-5609e1bcff68</GUID>
        <version>14</version>
        <color_code>#f7b500</color_code>
        <description>Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC.</description>
        <adhesion_info>Use glue, to avoid chipping of the glass.</adhesion_info>
    </metadata>
    <properties>
        <density>1.10</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">230</setting>
        <setting key="heated bed temperature">80</setting>
        <setting key="standby temperature">200</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">70</setting>
        <setting key="shrinkage percentage">0.9</setting>

07070100000046000081A4000003E800000064000000015BE2BC8400000C41000000000000000000000000000000000000003300000000fdm_materials-3.6.0/ultimaker_bam.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>Breakaway</material>
            <color>White</color>
        </name>
        <GUID>7e6207c4-22ff-441a-b261-ff89f166d5f9</GUID>
        <version>13</version>
        <color_code>#f1ece1</color_code> 
        <description>Breakaway Material. Breakaway is a matching support material for PLA, ABS, CPE, CPE+, and Nylon</description>
        <adhesion_info>same temperature/method as build material</adhesion_info> 
    </metadata>
    <properties>
        <density>1.22</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">225</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">100</setting>

<machine>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker S5"/>
            <setting key="print cooling">100</setting>
            <hotend id="BB 0.4" />
            <hotend id="BB 0.8">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="CC 0.6" />
            <hotend id="AA 0.25">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="AA 0.4">
                <setting key="hardware compatible">yes</setting>
            </hotend>
            <hotend id="AA 0.8">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <buildplate id="Glass">
                <setting key="hardware compatible">yes</setting>
                <setting key="hardware recommended">no</setting>
            </buildplate>
            <buildplate id="Aluminum">
                <setting key="hardware compatible">yes</setting>
                <setting key="hardware recommended">no</setting>
            </buildplate>
        </machine>
    </settings>
</fdmmaterial>
07070100000047000081A4000003E800000064000000015BE2BC84000010C8000000000000000000000000000000000000003900000000fdm_materials-3.6.0/ultimaker_cpe_black.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>CPE</material>
            <color>Black</color>
        </name>
        <GUID>a8955dc3-9d7e-404d-8c03-0fd6fee7f22d</GUID>
        <version>15</version>
        <color_code>#2a292a</color_code>
        <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
        <adhesion_info>Use glue.</adhesion_info>
    </metadata>
    <properties>
        <density>1.27</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">240</setting>
        <setting key="heated bed temperature">70</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">70</setting>

07070100000048000081A4000003E800000064000000015BE2BC84000010C7000000000000000000000000000000000000003800000000fdm_materials-3.6.0/ultimaker_cpe_blue.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>CPE</material>
            <color>Blue</color>
        </name>
        <GUID>4d816290-ce2e-40e0-8dc8-3f702243131e</GUID>
        <version>15</version>
        <color_code>#00a3e0</color_code>
        <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
        <adhesion_info>Use glue.</adhesion_info>
    </metadata>
    <properties>
        <density>1.27</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">240</setting>
        <setting key="heated bed temperature">70</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">70</setting>

07070100000049000081A4000003E800000064000000015BE2BC84000010CC000000000000000000000000000000000000003D00000000fdm_materials-3.6.0/ultimaker_cpe_dark-grey.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>CPE</material>
            <color>Dark Grey</color>
        </name>
        <GUID>10961c00-3caf-48e9-a598-fa805ada1e8d</GUID>
        <version>15</version>
        <color_code>#4f5250</color_code>
        <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
        <adhesion_info>Use glue.</adhesion_info>
    </metadata>
    <properties>
        <density>1.27</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">240</setting>
        <setting key="heated bed temperature">70</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">70</setting>

0707010000004A000081A4000003E800000064000000015BE2BC84000010C8000000000000000000000000000000000000003900000000fdm_materials-3.6.0/ultimaker_cpe_green.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>CPE</material>
            <color>Green</color>
        </name>
        <GUID>7ff6d2c8-d626-48cd-8012-7725fa537cc9</GUID>
        <version>15</version>
        <color_code>#78be20</color_code>
        <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
        <adhesion_info>Use glue.</adhesion_info>
    </metadata>
    <properties>
        <density>1.27</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">240</setting>
        <setting key="heated bed temperature">70</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">70</setting>

0707010000004B000081A4000003E800000064000000015BE2BC84000010CD000000000000000000000000000000000000003E00000000fdm_materials-3.6.0/ultimaker_cpe_light-grey.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>CPE</material>
            <color>Light Grey</color>
        </name>
        <GUID>173a7bae-5e14-470e-817e-08609c61e12b</GUID>
        <version>15</version>
        <color_code>#c5c7c4</color_code>
        <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
        <adhesion_info>Use glue.</adhesion_info>
    </metadata>
    <properties>
        <density>1.27</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">240</setting>
        <setting key="heated bed temperature">70</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">70</setting>

0707010000004C000081A4000003E800000064000000015BE2BC84000010C0000000000000000000000000000000000000003E00000000fdm_materials-3.6.0/ultimaker_cpe_plus_black.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>CPE+</material>
            <color>Black</color>
        </name>
        <GUID>1aca047a-42df-497c-abfb-0e9cb85ead52</GUID>
        <version>14</version>
        <color_code>#0e0e10</color_code>
        <description>Chemically resistant and tough. CPE+ is chemically inert, tough, dimensionally stable and handles temperatures up to 100ºC.</description>
        <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints.</adhesion_info>
    </metadata>
    <properties>
        <density>1.18</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">260</setting>
        <setting key="heated bed temperature">107</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">65</setting>
        <setting key="shrinkage percentage">0.9</setting>

07070100000050000081A4000003E800000064000000015BE2BC84000010CE000000000000000000000000000000000000003F00000000fdm_materials-3.6.0/ultimaker_cpe_transparent.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>CPE</material>
            <color>Transparent</color>
        </name>
        <GUID>bd0d9eb3-a920-4632-84e8-dcd6086746c5</GUID>
        <version>15</version>
        <color_code>#d0d0d0</color_code>
        <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
        <adhesion_info>Use glue.</adhesion_info>
    </metadata>
    <properties>
        <density>1.27</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">240</setting>
        <setting key="heated bed temperature">70</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">70</setting>

07070100000051000081A4000003E800000064000000015BE2BC84000010C8000000000000000000000000000000000000003900000000fdm_materials-3.6.0/ultimaker_cpe_white.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>CPE</material>
            <color>White</color>
        </name>
        <GUID>881c888e-24fb-4a64-a4ac-d5c95b096cd7</GUID>
        <version>15</version>
        <color_code>#f1ece1</color_code>
        <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
        <adhesion_info>Use glue.</adhesion_info>
    </metadata>
    <properties>
        <density>1.27</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">240</setting>
        <setting key="heated bed temperature">70</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">70</setting>

07070100000052000081A4000003E800000064000000015BE2BC84000010C9000000000000000000000000000000000000003A00000000fdm_materials-3.6.0/ultimaker_cpe_yellow.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>CPE</material>
            <color>Yellow</color>
        </name>
        <GUID>b9176a2a-7a0f-4821-9f29-76d882a88682</GUID>
        <version>15</version>
        <color_code>#f6b600</color_code>
        <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
        <adhesion_info>Use glue.</adhesion_info>
    </metadata>
    <properties>
        <density>1.27</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">240</setting>
        <setting key="heated bed temperature">70</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">70</setting>

07070100000053000081A4000003E800000064000000015BE2BC840000107E000000000000000000000000000000000000003B00000000fdm_materials-3.6.0/ultimaker_nylon_black.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>Nylon</material>
            <color>Black</color>
        </name>
        <GUID>c64c2dbe-5691-4363-a7d9-66b2dc12837f</GUID>
        <version>12</version>
        <color_code>#27292b</color_code>
        <description>Nylon is strong, abrasion-resistant, durable and engineered for low moisture sensitivity.</description>
        <adhesion_info>Use glue.</adhesion_info>
    </metadata>
    <properties>
        <density>1.14</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">245</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="retraction amount">8</setting>
        <setting key="retraction speed">25</setting>
        <setting key="adhesion tendency">2</setting>
        <setting key="surface energy">100</setting>

07070100000054000081A4000003E800000064000000015BE2BC8400001084000000000000000000000000000000000000004100000000fdm_materials-3.6.0/ultimaker_nylon_transparent.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>Nylon</material>
            <color>Transparent</color>
        </name>
        <GUID>e256615d-a04e-4f53-b311-114b90560af9</GUID>
        <version>12</version>
        <color_code>#d0d0d0</color_code>
        <description>Nylon is strong, abrasion-resistant, durable and engineered for low moisture sensitivity.</description>
        <adhesion_info>Use glue.</adhesion_info>
    </metadata>
    <properties>
        <density>1.14</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">245</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="retraction amount">8</setting>
        <setting key="retraction speed">25</setting>
        <setting key="adhesion tendency">2</setting>
        <setting key="surface energy">100</setting>

07070100000055000081A4000003E800000064000000015BE2BC8400001531000000000000000000000000000000000000003800000000fdm_materials-3.6.0/ultimaker_pc_black.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>PC</material>
            <color>Black</color>
        </name>
        <GUID>e92b1f0b-a069-4969-86b4-30127cfb6f7b</GUID>
        <version>15</version>
        <color_code>#0e0e10</color_code>
        <description>Strong, tough and temperature resistant. PC offers a great print quality, heat resistance up to 110ºC, mechanical strength and toughness.</description>
        <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints. Set your print speed to a low value (10mm/sec) to get better layer bonding.</adhesion_info>
    </metadata>
    <properties>
        <density>1.19</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">270</setting>
        <setting key="heated bed temperature">107</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">65</setting>
        <setting key="shrinkage percentage">0.7</setting>

<machine>
           <machine_identifier manufacturer="Cartesio bv" product="cartesio" />
           <setting key="print cooling">0.0</setting>
           <setting key="standby temperature">160</setting>
           <setting key="retraction speed">40</setting>
           <setting key="heated bed temperature">135</setting>
           <setting key="print temperature">245</setting>
           <hotend id="0.25mm thermoplastic extruder">
               <setting key="hardware compatible">yes</setting>
               <setting key="retraction amount">1.0</setting>
           </hotend>
           <hotend id="0.4mm thermoplastic extruder">
               <setting key="hardware compatible">yes</setting>
               <setting key="retraction amount">1.0</setting>
           </hotend>
           <hotend id="0.8mm thermoplastic extruder">
               <setting key="hardware compatible">yes</setting>
               <setting key="retraction amount">1.5</setting>
           </hotend>
       </machine>
    </settings>
</fdmmaterial>
07070100000056000081A4000003E800000064000000015BE2BC8400001537000000000000000000000000000000000000003E00000000fdm_materials-3.6.0/ultimaker_pc_transparent.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>PC</material>
            <color>Transparent</color>
        </name>
        <GUID>8a38a3e9-ecf7-4a7d-a6a9-e7ac35102968</GUID>
        <version>15</version>
        <color_code>#d0d0d0</color_code>
        <description>Strong, tough and temperature resistant. PC offers a great print quality, heat resistance up to 110ºC, mechanical strength and toughness.</description>
        <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints. Set your print speed to a low value (10mm/sec) to get better layer bonding.</adhesion_info>
    </metadata>
    <properties>
        <density>1.19</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">270</setting>
        <setting key="heated bed temperature">107</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">65</setting>
        <setting key="shrinkage percentage">0.7</setting>

<machine>
           <machine_identifier manufacturer="Cartesio bv" product="cartesio" />
           <setting key="print cooling">0.0</setting>
           <setting key="standby temperature">160</setting>
           <setting key="retraction speed">40</setting>
           <setting key="heated bed temperature">135</setting>
           <setting key="print temperature">245</setting>
           <hotend id="0.25mm thermoplastic extruder">
               <setting key="hardware compatible">yes</setting>
               <setting key="retraction amount">1.0</setting>
           </hotend>
           <hotend id="0.4mm thermoplastic extruder">
               <setting key="hardware compatible">yes</setting>
               <setting key="retraction amount">1.0</setting>
           </hotend>
           <hotend id="0.8mm thermoplastic extruder">
               <setting key="hardware compatible">yes</setting>
               <setting key="retraction amount">1.5</setting>
           </hotend>
       </machine>
    </settings>
</fdmmaterial>
07070100000057000081A4000003E800000064000000015BE2BC8400001531000000000000000000000000000000000000003800000000fdm_materials-3.6.0/ultimaker_pc_white.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>PC</material>
            <color>White</color>
        </name>
        <GUID>5e786b05-a620-4a87-92d0-f02becc1ff98</GUID>
        <version>15</version>
        <color_code>#ecece7</color_code>
        <description>Strong, tough and temperature resistant. PC offers a great print quality, heat resistance up to 110ºC, mechanical strength and toughness.</description>
        <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints. Set your print speed to a low value (10mm/sec) to get better layer bonding.</adhesion_info>
    </metadata>
    <properties>
        <density>1.19</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">270</setting>
        <setting key="heated bed temperature">107</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">65</setting>
        <setting key="shrinkage percentage">0.7</setting>

<machine>
           <machine_identifier manufacturer="Cartesio bv" product="cartesio" />
           <setting key="print cooling">0.0</setting>
           <setting key="standby temperature">160</setting>
           <setting key="retraction speed">40</setting>
           <setting key="heated bed temperature">135</setting>
           <setting key="print temperature">245</setting>
           <hotend id="0.25mm thermoplastic extruder">
               <setting key="hardware compatible">yes</setting>
               <setting key="retraction amount">1.0</setting>
           </hotend>
           <hotend id="0.4mm thermoplastic extruder">
               <setting key="hardware compatible">yes</setting>
               <setting key="retraction amount">1.0</setting>
           </hotend>
           <hotend id="0.8mm thermoplastic extruder">
               <setting key="hardware compatible">yes</setting>
               <setting key="retraction amount">1.5</setting>
           </hotend>
       </machine>
    </settings>
</fdmmaterial>
07070100000058000081A4000003E800000064000000015BE2BC840000135E000000000000000000000000000000000000003900000000fdm_materials-3.6.0/ultimaker_pla_black.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>PLA</material>
            <color>Black</color>
        </name>
        <GUID>3ee70a86-77d8-4b87-8005-e4a1bc57d2ce</GUID>
        <version>12</version>
        <color_code>#0e0e10</color_code>
        <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">200</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">100</setting>

07070100000059000081A4000003E800000064000000015BE2BC840000135D000000000000000000000000000000000000003800000000fdm_materials-3.6.0/ultimaker_pla_blue.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>PLA</material>
            <color>Blue</color>
        </name>
        <GUID>44a029e6-e31b-4c9e-a12f-9282e29a92ff</GUID>
        <version>12</version>
        <color_code>#00387b</color_code>
        <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">200</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">100</setting>

0707010000005A000081A4000003E800000064000000015BE2BC840000135E000000000000000000000000000000000000003900000000fdm_materials-3.6.0/ultimaker_pla_green.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>PLA</material>
            <color>Green</color>
        </name>
        <GUID>2433b8fb-dcd6-4e36-9cd5-9f4ee551c04c</GUID>
        <version>12</version>
        <color_code>#61993b</color_code>
        <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">200</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">100</setting>

0707010000005B000081A4000003E800000064000000015BE2BC8400001360000000000000000000000000000000000000003B00000000fdm_materials-3.6.0/ultimaker_pla_magenta.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>PLA</material>
            <color>Magenta</color>
        </name>
        <GUID>fe3982c8-58f4-4d86-9ac0-9ff7a3ab9cbc</GUID>
        <version>12</version>
        <color_code>#bc4077</color_code>
        <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">200</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">100</setting>

0707010000005C000081A4000003E800000064000000015BE2BC840000135F000000000000000000000000000000000000003A00000000fdm_materials-3.6.0/ultimaker_pla_orange.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>PLA</material>
            <color>Orange</color>
        </name>
        <GUID>d9549dba-b9df-45b9-80a5-f7140a9a2f34</GUID>
        <version>12</version>
        <color_code>#ed6b21</color_code>
        <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">200</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">100</setting>

0707010000005D000081A4000003E800000064000000015BE2BC8400001364000000000000000000000000000000000000003F00000000fdm_materials-3.6.0/ultimaker_pla_pearl-white.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>PLA</material>
            <color>Pearl-White</color>
        </name>
        <GUID>d9fc79db-82c3-41b5-8c99-33b3747b8fb3</GUID>
        <version>12</version>
        <color_code>#e3d9c6</color_code>
        <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">200</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">100</setting>

0707010000005E000081A4000003E800000064000000015BE2BC840000135C000000000000000000000000000000000000003700000000fdm_materials-3.6.0/ultimaker_pla_red.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>PLA</material>
            <color>Red</color>
        </name>
        <GUID>9cfe5bf1-bdc5-4beb-871a-52c70777842d</GUID>
        <version>12</version>
        <color_code>#bb1e10</color_code>
        <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">200</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">100</setting>

0707010000005F000081A4000003E800000064000000015BE2BC840000132B000000000000000000000000000000000000004300000000fdm_materials-3.6.0/ultimaker_pla_silver-metallic.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>PLA</material>
            <color>Silver Metallic</color>
        </name>
        <GUID>0e01be8c-e425-4fb1-b4a3-b79f255f1db9</GUID>
        <version>12</version>
        <color_code>#a1a1a0</color_code>
        <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">200</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">100</setting>

07070100000060000081A4000003E800000064000000015BE2BC8400001363000000000000000000000000000000000000003F00000000fdm_materials-3.6.0/ultimaker_pla_transparent.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>PLA</material>
            <color>Transparent</color>
        </name>
        <GUID>532e8b3d-5fd4-4149-b936-53ada9bd6b85</GUID>
        <version>12</version>
        <color_code>#d0d0d0</color_code>
        <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">200</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">100</setting>

07070100000061000081A4000003E800000064000000015BE2BC840000135D000000000000000000000000000000000000003900000000fdm_materials-3.6.0/ultimaker_pla_white.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>PLA</material>
            <color>White</color>
        </name>
        <GUID>e509f649-9fe6-4b14-ac45-d441438cb4ef</GUID>
        <version>12</version>
        <color_code>#f1ece1</color_code>
        <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">200</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">100</setting>

07070100000062000081A4000003E800000064000000015BE2BC840000135D000000000000000000000000000000000000003A00000000fdm_materials-3.6.0/ultimaker_pla_yellow.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>PLA</material>
            <color>Yellow</color>
        </name>
        <GUID>9c1959d0-f597-46ec-9131-34020c7a54fc</GUID>
        <version>12</version>
        <color_code>#f9a800</color_code>
        <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">200</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">100</setting>

<hotend id="0.4 mm" />
            <hotend id="0.4 mm 2-fans" />
        </machine>
    </settings>
</fdmmaterial>
07070100000063000081A4000003E800000064000000015BE2BC840000113D000000000000000000000000000000000000003E00000000fdm_materials-3.6.0/ultimaker_pp_transparent.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>PP</material>
            <color>Transparent</color>
        </name>
        <GUID>c7005925-2a41-4280-8cdd-4029e3fe5253</GUID>
        <version>15</version>
        <color_code>#d0d0d0</color_code>
        <description>Fatigue and chemical resistant. Polypropylene offers excellent temperature, chemical and fatigue resistance. Its toughness and low friction make it a perfect choice for prototyping and creating durable end-use models.</description>
        <adhesion_info>Adhesion sheets are required.</adhesion_info>
    </metadata>
    <properties>
        <diameter>2.85</diameter>
        <density>0.89</density>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">220</setting>
        <setting key="heated bed temperature">100</setting>
        <setting key="standby temperature">185</setting>
        <setting key="print cooling">20</setting>
        <setting key="retraction speed">35</setting>
        <setting key="shrinkage percentage">2.5</setting>

<hotend id="BB 0.4" />
            <hotend id="BB 0.8" />
            <hotend id="CC 0.6" />
            <hotend id="AA 0.25">
                <setting key="hardware compatible">yes</setting>
                <setting key="standby temperature">100</setting>
                <setting key="retraction amount">6.5</setting>
                <setting key="retraction speed">25</setting>
            </hotend>
            <hotend id="AA 0.4">
                <setting key="hardware compatible">yes</setting>
            </hotend>
            <hotend id="AA 0.8">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">8</setting>
                <setting key="print cooling">10</setting>
            </hotend>
            <buildplate id="Glass">
                <setting key="hardware compatible">no</setting>
                <setting key="hardware recommended">yes</setting>
            </buildplate>
            <buildplate id="Aluminum">
                <setting key="hardware compatible">yes</setting>
                <setting key="hardware recommended">yes</setting>
            </buildplate>
        </machine>
    </settings>
</fdmmaterial>
07070100000064000081A4000003E800000064000000015BE2BC8400001783000000000000000000000000000000000000003300000000fdm_materials-3.6.0/ultimaker_pva.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>PVA</material>
            <color>Natural</color>
        </name>
        <GUID>fe15ed8a-33c3-4f57-a2a7-b4b78a38c3cb</GUID>
        <version>12</version>
        <color_code>#f5f2d1</color_code>
        <description>Water soluble support material. PVA is a matching support material for PLA, CPE and Nylon.</description>
        <adhesion_info>Use the same temperatures and adhesion method as your build material(s).</adhesion_info>
        <instructions>http://ultimaker.com/we/have/no/instruction/link/yet</instructions>
        <author>
            <organization>Ultimaker B.V.</organization>
            <contact>Ultimaker Support</contact>
            <email>support@ultimaker.com</email>
            <phone>+31 345 712001</phone>
            <address>
                <street>Watermolenweg 2</street>
                <city>Geldermalsen</city>
                <region>Gelderland</region>
                <zip>4191 PN</zip>
                <country>The Netherlands</country>
            </address>
        </author>
        <supplier>
            <organization>Ultimaker B.V.</organization>
            <contact>Support</contact>
            <email>support@ultimaker.com</email>
            <phone>+31 345 712001</phone>
            <address>
                <street>Watermolenweg 2</street>
                <city>Geldermalsen</city>
                <region>Gelderland</region>
                <zip>4191 PN</zip>
                <country>The Netherlands</country>
            </address>
        </supplier>
        <EAN>87 10400 31118 0</EAN>
        <MSDS>http://...</MSDS>
        <TDS>http://...</TDS>
    </metadata>
    <properties>
        <density>1.23</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">215</setting>
        <setting key="standby temperature">175</setting>

<machine>
            <machine_identifier manufacturer="Cartesio bv" product="cartesio" />
            <setting key="print cooling">0.0</setting>
            <setting key="standby temperature">160</setting>
            <setting key="retraction speed">40</setting>
            <setting key="heated bed temperature">50</setting>
            <setting key="print temperature">205</setting>
            <hotend id="0.25mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.0</setting>
            </hotend>
            <hotend id="0.4mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.0</setting>
            </hotend>
            <hotend id="0.8mm thermoplastic extruder">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">1.5</setting>
            </hotend>
        </machine>
    </settings>
</fdmmaterial>
07070100000065000081A4000003E800000064000000015BE2BC8400000DD5000000000000000000000000000000000000003F00000000fdm_materials-3.6.0/ultimaker_tough_pla_black.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>Tough PLA</material>
            <color>Black</color>
        </name>
        <GUID>03f24266-0291-43c2-a6da-5211892a2699</GUID>
        <version>8</version>
        <color_code>#2a292a</color_code>
        <description>Technical PLA material with toughness similar to ABS. Ideal for reliably printing functional prototypes and tooling at larger sizes, Tough PLA offers the same safe and easy use as regular PLA.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.22</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">225</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">100</setting>

07070100000066000081A4000003E800000064000000015BE2BC8400000DD5000000000000000000000000000000000000003F00000000fdm_materials-3.6.0/ultimaker_tough_pla_green.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>Tough PLA</material>
            <color>Green</color>
        </name>
        <GUID>6d71f4ad-29ab-4b50-8f65-22d99af294dd</GUID>
        <version>8</version>
        <color_code>#00a95c</color_code>
        <description>Technical PLA material with toughness similar to ABS. Ideal for reliably printing functional prototypes and tooling at larger sizes, Tough PLA offers the same safe and easy use as regular PLA.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.22</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">225</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">100</setting>

07070100000067000081A4000003E800000064000000015BE2BC8400000DD3000000000000000000000000000000000000003D00000000fdm_materials-3.6.0/ultimaker_tough_pla_red.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>Tough PLA</material>
            <color>Red</color>
        </name>
        <GUID>2db25566-9a91-4145-84a5-46c90ed22bdf</GUID>
        <version>8</version>
        <color_code>#de4343</color_code>
        <description>Technical PLA material with toughness similar to ABS. Ideal for reliably printing functional prototypes and tooling at larger sizes, Tough PLA offers the same safe and easy use as regular PLA.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">225</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">100</setting>

07070100000068000081A4000003E800000064000000015BE2BC8400000DD5000000000000000000000000000000000000003F00000000fdm_materials-3.6.0/ultimaker_tough_pla_white.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>Tough PLA</material>
            <color>White</color>
        </name>
        <GUID>851427a0-0c9a-4d7c-a9a8-5cc92f84af1f</GUID>
        <version>8</version>
        <color_code>#ecece7</color_code>
        <description>Technical PLA material with toughness similar to ABS. Ideal for reliably printing functional prototypes and tooling at larger sizes, Tough PLA offers the same safe and easy use as regular PLA.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">225</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">100</setting>

07070100000069000081A4000003E800000064000000015BE2BC8400001080000000000000000000000000000000000000003900000000fdm_materials-3.6.0/ultimaker_tpu_black.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>TPU 95A</material>
            <color>Black</color>
        </name>
        <GUID>eff40bcf-588d-420d-a3bc-a5ffd8c7f4b3</GUID>
        <version>12</version>
        <color_code>#0e0e10</color_code>
        <description>Wear and tear resistant. TPU features a Shore-A hardness of 95 and an elongation of up to 580% at break. Suitable for applications that require slight flexibility, wear and tear, and chemical resistance.</description>
        <adhesion_info>Use glue.</adhesion_info>
    </metadata>
    <properties>
        <density>1.22</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <setting key="print temperature">228</setting>
        <setting key="heated bed temperature">0</setting>
        <setting key="standby temperature">175</setting>
        <setting key="adhesion tendency">3</setting>
        <setting key="surface energy">100</setting>

<hotend id="BB 0.4" />
            <hotend id="BB 0.8" />
            <hotend id="CC 0.6" />
            <hotend id="AA 0.25">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="AA 0.4">
                <setting key="hardware compatible">yes</setting>
                <setting key="print cooling">20</setting>
                <setting key="retraction amount">8</setting>
                <setting key="retraction speed">35</setting>
            </hotend>
            <hotend id="AA 0.8">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">8</setting>
                <setting key="retraction speed">45</setting>
                <setting key="print cooling">50</setting>
            </hotend>
            <buildplate id="Glass">
                <setting key="hardware compatible">yes</setting>
                <setting key="hardware recommended">yes</setting>
            </buildplate>
            <buildplate id="Aluminum">
                <setting key="hardware compatible">yes</setting>
                <setting key="hardware recommended">no</setting>
            </buildplate>
        </machine>
    </settings>
</fdmmaterial>
0707010000006D000081A4000003E800000064000000015BE2BC840000034F000000000000000000000000000000000000003700000000fdm_materials-3.6.0/verbatim_bvoh_175.xml.fdm_material<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Verbatim</brand>
            <material>BVOH</material>
            <color>Generic</color>
        </name>
        <GUID>c860a504-f47c-4c57-a251-1e2ecd79600a</GUID>
        <version>2</version>
        <color_code>#a32bcc</color_code>
        <description>Water soluble support material. BVOH is a matching support material for PLA, CPE and PET.</description>
        <adhesion_info>Use the same temperatures and adhesion method as your build material(s).</adhesion_info>
    </metadata>
    <properties>
        <density>1.23</density>
        <diameter>1.75</diameter>
    </properties>
    <settings>
        <setting key="print temperature">210</setting>
    </settings>
</fdmmaterial>
0707010000006E000081A4000003E800000064000000015BE2BC8400000399000000000000000000000000000000000000003300000000fdm_materials-3.6.0/zyyx_pro_flex.xml.fdm_material<?xml version='1.0' encoding='utf-8'?>
<fdmmaterial version="1.3" xmlns="http://www.ultimaker.com/material">
  <metadata>
    <name>
      <brand>ZYYX</brand>
      <material>TPU</material>
      <color>Generic</color>
      <label>proFlex</label>
    </name>
    <adhesion_info>Use with ZYYX standard build plate</adhesion_info>
    <description>Fast, safe and reliable printing. ZYYX proFlex is ideal for flexible parts or soft grip parts.</description>
    <version>1</version>
    <color_code>#c0c0c0</color_code>
    <GUID>182d2e1d-02cf-4208-b5e7-08607d0af2d8</GUID>
  </metadata>
  <properties>
    <density>1.2</density>
    <diameter>1.75</diameter>
  </properties>
  <settings>
    <setting key="print temperature">230</setting>
    <setting key="heated bed temperature">0</setting>
    <setting key="standby temperature">200</setting>
    <setting key="print cooling">100</setting>
  </settings>
</fdmmaterial>
0707010000006F000081A4000003E800000064000000015BE2BC84000003B1000000000000000000000000000000000000003200000000fdm_materials-3.6.0/zyyx_pro_pla.xml.fdm_material<?xml version='1.0' encoding='utf-8'?>
<fdmmaterial version="1.3" xmlns="http://www.ultimaker.com/material">
  <metadata>
    <name>
      <brand>ZYYX</brand>
      <material>PLA</material>
      <color>Generic</color>
      <label>proPLA</label>
    </name>
    <adhesion_info>Use with ZYYX standard build plate</adhesion_info>
    <description>Fast, safe and reliable printing. ZYYX proPLA is ideal for printing parts and prototypes with a great surface quality.</description>
    <version>1</version>
    <color_code>#ffc924</color_code>
    <GUID>cece7f55-2ccc-4807-bbb6-4a5df9c9df81</GUID>
  </metadata>
  <properties>
    <density>1.24</density>
    <diameter>1.75</diameter>
  </properties>
  <settings>
    <setting key="print temperature">210</setting>
    <setting key="heated bed temperature">0</setting>
    <setting key="standby temperature">200</setting>
    <setting key="print cooling">100</setting>
  </settings>
</fdmmaterial>
07070100000000000000000000000000000000000000010000000000000000000000000000000000000000000000000000000B00000000TRAILER!!!715 Blöcke

Places

File fdm_materials-3.6.0.obscpio of Package cura-fdm-materials (Revision c781a65ace9f53fcac51dc071b8f6e3e)

Places