openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File atop.changes of Package atop

-------------------------------------------------------------------
Mon Jul 29 06:48:50 UTC 2024 - Michael Vetter <mvetter@suse.com>

- Update to 2.11.0:
  * Cgroups (version 2) support.
    Show the hierarchical structure of cgroups and the related metrics
    with key/option 'G', and define the cgroup depth with the keys/options
    2 till 7. Key/option 8 also shows the processes per cgroup level,
    except the kernel processes in the root cgroup. Key/option 9 shows
    the related processes per cgroup level including the kernel processes
    in the root cgroup. With key/option 'C' the output is sorted on
    CPU consumption (default), with key/option 'M' on memory consumption,
    and with key/option 'D' (requires root privileges) on disk utilization.
    Note: The collection of cgroup information per process is not supported any more.
  * Twin mode: live measurement with review option.
    In twin mode atop spawns into a lower level process that gathers
    the counters and writes them to a temporary raw file, and an upper level
    process that reads the counters from the temporary raw file and presents them to
    the user.
    The reading of the upper level process keeps in pace with the written samples
    of the lower level process for live measurements. However, when pressing the
    'r' (reset to measurement begin), the 'b' (branch to time stamp),
    or the 'T' (previous sample), the upper level process implicitly
    pauses with the possibility to review previous samples.
    The 'z' (explicit pause) can also be used to pause the live measurement.
    When pressing the 'z' again (continue after pause) viewing of the
    live measurement will be continued.
  * Various corrections related to JSON output.
  * Improved gathering of current CPU frequency.
  * Support more than 500 CPUs.
  * The format of the raw file is incompatible with previous versions.
    Raw files from previous versions can be converted to the new layout
    with the atopconvert command.
- Update atop-makefile.patch

-------------------------------------------------------------------
Fri Jan  5 07:39:27 UTC 2024 - Michael Vetter <mvetter@suse.com>

- Update to 2.10.0:
  * Additional memory statistics on system level: amount of available
    memory, amount of memory used for Transparant Huge Pages, amount
    of memory used by two categories of static huge pages (usually
    2MiB and 1GiB), and the number of pages transferred to/from zswap.
  * Additional counters for the number of idle threads on system
    level and process level.
  * Refined view of memory bar graph, including free static huge pages.
  * Generic way to determine the container id or pod name for
    containerized processes.
  * Support for a BPF-based alternative[1] for the netatop kernel
    module to gather network statistics per process/thread.
  * Use the -z flag followed by a regex to prepend matching environment
    variables to the full command line that is shown per process (with key 'c').
  * Various bugfixes (like memory leak when switching to bar graph mode)
    and minor improvements.
  * Bugfix: failing malloc while starting atopsar (unprivileged) for a live measurement.
  * The program atophide can be used to make an extraction from an input
    raw log to an output raw log, optionally specifying a begin time and/or an
    end time. The output raw log can be anonymized, i.e. the hostname
    will be replaced, command names of non-standard commands will be
    replaced, all command arguments will be wiped, logical volume names
    will be replaced and NFS mounted volume names will be replaced.
  * The format of the raw file is incompatible with previous versions.
    Raw files from previous versions can be converted to the new layout
    with the atopconvert command.

-------------------------------------------------------------------
Sat May 13 11:19:51 UTC 2023 - Michael Vetter <mvetter@suse.com>

- Update to 2.9.0:
  * Avoid compiler warning by limiting PSI average
  * Install cleanup function to avoid termination of parent process
  * add man for PAG steal
  * Oomkills event should not remain orange after boot values
  * Clarified atop man page
  * Closing bracket missing in synopsis
  * Add highlight concerning bar graph mode
  * Introduce bar graph mode Besides all detailed information that
    is supplied by atop on system and process level, a (character-based)
    bar graph can be shown about the utilization of the most critical system resources
  * Freeing ethlink should depend of ifdef
  * Added reset to indicate shadow file to be closed
  * fix atopacctd.c: failed to start atopacct.service
  * acctatop: reacquire acctfd to collect nprocexit for some bad cases
  * Calibrate nprocexit to avoid atop coredumps unexpectedly
  * json.c: fix avque counters output
  * Resolve compiler warnings from latest versions of GCC
  * Added versdate.h to make clean target
  * Revert "Added versdate.h to make clean target"
  * Added versdate.h to make clean target
  * fix calculation for scan and steal
  * only call str.decode if nvml returned bytes
  * Add exit epoch to parseable output PRG (solves issue #242)
  * Minor correction in man page for NVCSW/NIVCSW
  * Context switches (voluntary and involuntary) on process level incorrect
  * Various modifications releated to (non)voluntary context switches
  * Add nvcsw and nivcsw for each process
  * ifprop.c: Fix possible memory leak
  * Code cleanup and prototype additions
  * Consistency check on number of threads (solves issue #232)
  * atop-rotate.service: use restart instead of try-restart
  * Add link to atophttpd
- Update patches:
  * atop-makefile.patch
  * harden_atop-rotate.service.patch

-------------------------------------------------------------------
Sat Jan  7 16:56:47 UTC 2023 - Michael Vetter <mvetter@suse.com>

- Update to 2.8.1:
  * Correct NUMA conversion in logfiles from version 2.7 to 2.8
  * Avoid buffer overflows during value formatting
  * Solve compiler warnings about format-truncation

-------------------------------------------------------------------
Mon Jan  2 12:55:55 UTC 2023 - Michael Vetter <mvetter@suse.com>

- Update to 2.8.0:
  * Rename AUTHOR in spec file
  * Adapt atopconvert for conversion to version 2.8
  * Atopacct.service verifies if psacct/acct is active (#227)
    To avoid that the atopacctd daemon and the (ps)acct service both
    try to activate process accounting continuously, the atopacct.service
    refuses to start when the (ps)acct service is already active.
  * Fix LLC output for Json
  * Solve format-overflow/maybe-uninitialized warnings
  * Reshuffle counters to ease raw file conversion
  * Recalculate average queue in parseable output
  * Corrected the order of inflight/avque
  * Add inflight and avque counters to parseable data
  * Fix BDELAY in priphead call to make_proc_prints for schedprocs
  * Correct the array index used for previous samples per-container CPU values
  * Reinstate dropped printing of avio msec values between 99.95 and 9995
  * photosyst: add ceph rbd disk display
  * photosys.c: correct the numa number for NUM and NUC
  * Timeout when setting semaphore in atop (#207)
  * Current CPU set to -1 for terminated process (#201)
    When a process has terminated (status 'E') the current CPU will be
    set to -1 (means: unknown) in the parsable output with label PRC.
  * Typo corrections and correction in man page
  * Introduce JSON output by '-J xxx'
  * Add missing counter iInCsumErrors to ICMP counters
  * supplement inflight I/O requests
  * Man page: clarify elapsed time in PRG parseable output
  * Exponent calulation for high counter might exceed column width
    When a column width was defined of e.g. 4 positions, the value
    99999 was shown as 100e3 instead of 99e3 (upward rounding caused
    an extra position).
  * PID selection can not be undone for same interval When pressing
    'I' to select particular PIDs and pressing 'I' again within the
    same interval to deselect by pressing the Enter-key, the deselection
    is ignored. Solved by reinitializing the input buffer.
  * Split the MEM line into two lines and add pagetable size Since it was
    hardly possible to view the values in the MEM line (too many), the memory
    utilization has been spread over two lines. The amount of memory used
    for page tables has been added.
  * Memory usage for TCP/UDP sockets
  * Add Documentation key to atop-rotate.service/.timer (#206)
  * Correct typos in man pages (#205)
  * Add cgroup support (#127) The current cgroup is registered
    for systems that are based on cgroup v2. Apart from the group name also
    relevant controller information is maintained, like the cpu.max and the
    memory.max (for the group itself and the most restrictive value in the
    parent groups).
  * Fix compiling error with -DHTTPSTATS
  * supplement tcpsock and udpsock memory consumption
  * Store PID width in header of raw log Register the number of positions
    for PID and TID numbers on the measured system in the raw log. In this
    way, the viewing of the raw log on another system will use the proper
    column width for PID/TID.
  * showhdrline: fix OOB access when COLS is too small
  * Fix disk busy in man page
  * Add block I/O delay to processes/threads
  * Move run_in_guest into various.c
  * Minor changes to text, column priority and coloring
  * Support pgin & pgout
  * Correction on calibration (one too many)
  * Detect vmmemctl at two locations
  * Use dup2 instead of close+dup
  * Fix compiling warning
  * Calibrate the value of nthr for each process
  * photosyst.c: fixed path for vmmemctl
  * Fix typo in man page
  * Added link
  * Only print current CPU frequency when supported by CPU architecture
  * Lower priority of column 'numnode' in MEM line
  * Support per-second counter for LLC
  * Reformat status line info in initial screen
  * Add LLC in atop man page
  * Support LLC collection
  * Add OpenRC init scripts (atop, atopacct)
  * Support LLC collection
- Refresh patches:
  * harden_atop-rotate.service.patch
  * harden_atopacct.service.patch

-------------------------------------------------------------------
Mon Feb 28 23:24:00 UTC 2022 - Michael Vetter <mvetter@suse.com>

- Update to 2.7.1:
  * Correct disk stats in atopsar (#182)
  * Explicit type definition in atop.service (#180)

-------------------------------------------------------------------
Fri Jan  7 14:16:10 UTC 2022 - Michael Vetter <mvetter@suse.com>

- Update to 2.7.0:
  *  Describe (un)restricted view in first screen
  *  Cosmetic change
  *  Determine (un)restricted view by verifying suid instead of euid.
  *  Do not ignore unknown network interface
  *  Parseable output: optionally exchange spaces in command
  *  No setuid by default
  *  Correct conversion to 2.7 raw files
  *  Corrected type
  *  Only show per-node NUMA stats when more than 1 node
  *  Prepare man pages for version 2.7
  *  Prepare atopconvert for version 2.7
  *  Detect logrotation for process accounting with psacct/acct
  *  Speed and duplex mode not correctly filled for interface
  *  Bug solution related to discards
  *  Support discard counter for disks and skip unused disks
  *  ifprop.c: fix ioctl parameter after handshaking with kernel
  *  Show gigabits/sec instead of megabits/sec for Infiniband #131
  *  CVE: use execvp with a specified path to avoid PATH hijacking
  *  Correct memory busy logic in atopsar
  *  Add parseable output for per-node NUMA counters
  *  Additions to NUMA counters Table overflow checks
  *  Gather and show per numa cpu related statistics
  *  Gather and show per numa memory related statistics
  *  Correction in handling of zswap and ksm counters
  *  Support containers created by podman
  *  Cleanup old messages
  *  Do not change owner to root in Makefile (#76)
  *  Support process accounting log /var/log/account/pacct (#138)
  *  Polish do_perfevents when atop built with NOPERFEVENT
  *  Do not use doconvert funtion to validate counter (#160)
  *  New counter for number of NUMA pages migrated
  *  Modify field order and priority of paging counters
  *  Small text modification for migrated counter
  *  Avoid non-initialized prestat by introducing extra pointer
  *  Function 'calcdiff' (deviate.c) used uninitialized prestat struct
  *  Reserver space for future counters.
  *  Clean up ignored files
  *  Variable number of positions for sortitem
  *  Adapt man page of atop for state selection (add state 'I').
  *  Allow thread state 'I' with state selection (key 'Q')
  *  Count idle threads as non-interruptible threads
  *  Uninitialized index might cause segmentation fault.
  *  Support NVMe multipath disk statistics
  *  Support page migration counter
  *  photosyst.c: fix build on musl
  *  Use of struct ethtool_link_settings should be conditional
  *  Cosmetic change (source code layout)
  *  Various bug fixes and in general add 'thread' to all messages
  *  Properly define if interface is virtual or physical
  *  Add license info to various include files (solves issue #144)
  *  HTTP statistics modified from -h flag to -o flag (#152)
  *  Possible buffer overflow with huge number of seconds Number
     of seconds will be limited to 5 positions.
  *  Possible buffer overflow with average disk I/O
  *  Allow process selection based on specific process states.
  *  Correct definition of environment variable LOGOPTS
  *  Switch to using curses vw_printw as vwprintw is deprecated
  *  Support multiple counters 'allocstall_' in /proc/vmstat.
  *  Avoid integer overflow when calculating PSI percentages.
  *  Suppress irrelevant counters (solves issue #148)
  *  Add the number of OOM kills to the -s report
  *  Record the number of process stalls to run memory compaction
  *  Make clean removes atopsar now (issue 145)
  *  Add counter for the number of OOM kills to the PAG line
  *  Add counters for zswap and KSM.
  *  ifprop.c: fix build with kernel < 4.6
  *  Fix initifprop() when obtaining properties of all interfaces
  *  Fixed rounding problems in the average-per-second mode.
- Refresh atop-makefile.patch
- Refresh harden_atop.service.patch
- Call make install instead of make systemdinstall
  Default is systemd now

-------------------------------------------------------------------
Wed Aug 11 08:40:14 UTC 2021 - Johannes Segitz <jsegitz@suse.com>

- Added hardening to systemd service(s). Added patch(es):
  * harden_atop-rotate.service.patch
  *harden_atop.service.patch
  *harden_atopacct.service.patch
  *harden_atopgpu.service.patch

-------------------------------------------------------------------
Tue Apr 13 21:33:30 UTC 2021 - Ferdinand Thiessen <rpm@fthiessen.de>

- Update to version 2.6.0
  * Sort threads within process.
  * Individual threads within a process (key 'y') are shown in the
    order of their TID. With the additional key 'Y' threads within
    a process are sorted based on the current sort criterium.
  * Show the WCHAN per thread.
  * With the key 'W' is active, the wait channel is determined per
    thread and shown with the scheduling information (key 's').
  * Show runqueue delay per thread/process.
  * For every process (cumulated) and every thread the time spent
    waiting on the runqueue is shown as value 'RDELAY'.
  * Show other modified/new metrics:
    + PSI pressure during interval time is shown
    + Counter 'avio' (average I/O time) for fast disks in
      microseconds or nanoseconds
    + Counter 'zfarc' showing the current size of the ARC (cache)
      for ZFSonlinux
    + Counter 'swcac' showing the current size of the swap cache
    + Counter LOCKSZ showing the virtual locked memory size
  * Avoid crash with very high load average values.
  * Fix errors in reading InfiniBand states.
  * Support of rawlog files spanning multiple days.
  * The time specification to define the begin time (-b flag)
    and end time (-e flag) of both atop and atopsar is
    [YYYYMMDD]hhmm now
  * This also applies to the branch key ('b') when using atop
    interactively.
  * Support reading rawlog from a pipe.
  * Rawlog data can be read from a pipe by atop and atopsar with
    the option '-r -'. In this way, concatenated rawlog data from
    the command atopcat can be directly processed.
  * New program atopcat, the program atopcat concatenates rawlog
    files and writes this data to stdout. The output can be
    redirected to a new rawlog file or to atop/atopsar directly
    via a pipe (see option '-r -' of these commands).
    In this way e.g. weekly or monthly reports or extractions
    can be created.

-------------------------------------------------------------------
Fri Jul 31 20:26:06 UTC 2020 - Matthias Eliasson <elimat@opensuse.org>

- Update to version 2.5.0 
  Modifications for atop:
  * Avoid using perf counters in VM
    New option 'perfevents' in the atoprc file to define if the Instructions
	Per Cycle (IPC) should be retrieved via the 'perf' counters. Specify
	value 'auto' (default), 'enable' or 'disable'. In case of 'auto', the
	Instructions Per Cycle counter will not be retrieved on VMs due to the
	overhead of reading this counter in a guest.
  * Improve daily rotation of logfile for systemd-based systems.
    Exchange the files /etc/cron.d/atop, /etc/logrotate.d/psaccs_atop,
	/etc/logrotate.d/psaccu_atop, /usr/share/atop/atop.daily,
	/var/log/atop/dummy_after and /var/log/atop/dummy_before by
	atop-rotate.service and atop-rotate.timer.
  * Bug fixes:
    Correction of PSI value 'io full'.
    Use smaps_rollup (if present) instead of smaps for better performance.
    Use writev instead of 3 single writes to avoid logfile corruption.
    Modified handling of error messages (remain visible after window is
	closed).
    Correct CID for containers created by Kubernetes.
    Allow reading a logfile via a named pipe (non-seekable).
  Modifications for atopconvert:
  * Show version of input file (even if only one parameter specified).
  General:
  * The format of the raw file is compatible with version 2.4.
- Run spec-cleaner
- Remove requires for cron and logrotate now that there is systemd service
  and timers handling logrotation
- Remove Requires(post) for permissions since atop does not use cron files anymore
- Refresh patch:
  * atop-makefile.patch
- Add atop defaults in /etc/default/atop

-------------------------------------------------------------------
Tue Aug 20 11:32:08 CEST 2019 - kukuk@suse.de

- Package /etc/cron.d, as this is now part of cron which we don't
  want to require

-------------------------------------------------------------------
Sun Feb 17 20:14:07 UTC 2019 - Matthias Eliasson <matthias.eliasson@gmail.com>

- Update to 2.4.0
  * Modifications for atop:
    + Support for Nvidia GPU statistics:
      A separate daemon atopgpud has been developed to maintain statistics of
	  Nvidia GPUs in the system. When this daemon is running, atop will
	  connect to this daemon and will get/show the GPU statistics with every
	  interval on system level and process level (key 'e').
      The atopgpud daemon will only be active when it is explicitly enabled 
	  (see man pages for more info).
    + Support for Infiniband statistics:
      Counters showing the bandwidth utilization of Infiniband ports
	  (system level) are added.
    + Support for Pressure Stall Information (PSI):
      The average pressure percentages of CPU, memory and I/O are reported
	  for the last 10, 60 and 300 seconds. These percentage are provided from
	  kernel 4.20 onwards.
    + Faster startup of atop:
      The allocation strategy for processes and threads has been improved,
	  which will specifically be noticable on larger systems with lots of
	  multi-threaded processes.
    + Configurable options for atop running in the background:
      Default options of script atop.daily can be overruled by
	  /etc/default/atop file.
    + CPU Instructions Per Cycle (IPC):
      For every CPU, the average number of instructions per CPU cycle is
	  shown as 'ipc'. Besides, a column is shown with the number of cycles
	  executed per second as `cycl` (shown as effective Hz frequency).
    + Various fixes:
      Various NFS counters corrected.
      Recognition of nvme and nbd disks.
      Recognition of DEADLINE scheduling policy.
      Proper handling of memory locking (improper handling caused malloc
	  failures in previous versions).
  * New program atopconvert:
    + This program can be used to convert the layout of older raw files to
	  newer raw files. Raw files from atop 2.0 onwards can be converted to
	  the newest version (now: 2.4).
  * Modifications for atopsar:
    + Reports can be printed now about the utilization of GPUs and Infiniband,
	  and about the PSI percentages.
  * General:
    + The format of the raw file is incompatible with earlier versions.
	  However, old raw files can be converted now by the program atopconvert
	  to be read or extended by newer atop versions.
- Clean with spec-cleaner
- Refresh atop-makefile.patch

-------------------------------------------------------------------
Mon Jun 25 09:49:45 UTC 2018 - rbrown@suse.com

- Correct copyright attribution

-------------------------------------------------------------------
Sun Jun 10 11:22:35 UTC 2018 - antoine.belvire@opensuse.org

- Update to 2.3:
  * Modifications for atop:
    + Support for Docker containers.
    + Improved gathering of process data.
    + Improved memory figures for processes.
    + Variable width for PID column.
    + Better handling when started via sudo (not entering stopped
    + state).
    + Handling of disk drives starting with 'xvd...'.
  * Modifications for atopacct:
    + Better error handling of Netlink interface.
    + Immediate reaction when receiving SIGTERM signal.
    + Bypass for kernel bug 190711 (Netlink interface not
      available).
    + Bypass for kernel bug 190271 (process accounting does not
      always start).
  * Modifications for atopsar:
    + Top-3 of resource consuming processes only shows active
      processes now.
  * General:
    + The format of the raw file is upward compatible with version
      2.2-3.
- Clean with spec-cleaner.

-------------------------------------------------------------------
Tue Nov 22 14:11:06 UTC 2016 - coolo@suse.com

- update to 2.2:
     * Modifications for atop:
         a. New keys for process selection:
            '/' to select processes containing a particular search string in the command line arguments.
            'I' to select processes running with particular PIDs.
         b. New counters for NFS activity:
            On system level, counters are maintained about NFS traffic. Three new labels are introduced for this purpose:
            'NFS' for NFS server statistics (overall).
            'NFC' for NFS client statistics (overall).
            'NFM' for NFS client statistics per mounted NFS filesystem (so multiple lines possible).
         c. New counters for OpenVZ containers:
            CPU consumption and memory occupation are shown per container on system level (label 'CON').
            Container ID and virtual PID are shown on process level (when using key 'v' or 's').
         d. Bug fixes:
            The maximum transfer rate larger than 1 Gbit for ethernet interfaces is now correctly shown.
            The maximum transfer rate for wifi connections is now shown.
            For interfaces in general, the maximum transfer rate is shown as a separate column ('sp').
            
            Counters about virtual disk type 'xvd[a-z]' are shown.
            
            Several minor bugs have been solved.
     * Modifications for atopacct:
         a. Avoid that process accounting is reactivated too frequently (and unnecessary).
     * Modifications for atopsar:
         a. Add flags for NFS traffic ('-n' for NFS mounts, '-j' for overall NFS 
            client activity and '-J' for overall NFS server activity).
     * General:
         a. Support for systemd-based distributions has been added.
         b. The format of the raw file is incompatible with earlier versions. However, 
            the earlier version of atop is automatically activated when accessing an 
            older raw file.
- cleanup spec file - remove support for < 12.1

-------------------------------------------------------------------
Sat Oct 18 12:40:40 UTC 2014 - pascal.bleser@opensuse.org

- update to 2.1:
  * OpenVZ support: virtual environment identifier per process (envID)
  * Bug solution: when the screen-width is larger than the total number of
    columns to be printed, empty columns are added, however one column too many
  * Removed useless empty column for memory statistics
  * Introduce the 'G' key to suppress showing/accumulating exited processes
    in the output
  * Support CPU frequencies for systems with Intel P-state driver
  * Introduction of new daemon atopacctd. This daemon switches on process
    accounting and transfers every accounting record to an accounting shadow
    file. The source accounting file will regularly be truncated, while the
    shadow files are written with a limited size in a queued way. Non-used
    shadow files are deleted regularly.
  * Bug-solution: segmentation fault when one of the process names in the
    system contains a newline
  * Introduce configurable colors: in the atoprc file, colors can be defined
    for information messages (default green), threads (default yellow), almost
    critical resources (default cyan) and critical resources (default red).
  * Limit the names of network interfaces to six characters max
  * Introduction of proportional memory size (PSIZE) per process. For the
    resident memory parts used by a process that are shared with other
    processes, only a proportional part (shared memory part divided by the
    number of sharers) is accounted to the process. Since the gathering of this
    value is rather time-consuming (reading the smaps file of every process),
    it is optional ('R' key or '-R' flag).
  * Increased number of LVMs and disks supported
  * Support for huge pages (total and in use).

-------------------------------------------------------------------
Thu Jul 26 07:48:55 UTC 2012 - pascal.bleser@opensuse.org

- update to 1.27-3:
  * service file for systemd
  * solved division-by-zero when maxfreq=0 and more precise coloring of
    concerning CPU-values when CPU overloaded
  * if setuid-root is set for atop, root-privileges are regained when reading
    /proc/pid/io (nowadays only readable for root) to obtain the disk stats per
    process
  * added EMC Power device recognition
  * better recognition of version of process accounting file
  * improved error handling when not enough columns or lines
  * suppress sorting of system resources by key F or flag -F (toggle)
  * create unique /tmp name for decompressed raw file
  * numerous cosmetic changes and man-page updates
  * improved screen handling
  * limited maximum file-size for process accounting file (200 MiB)
  * improved handling of process accounting
  * new key 'S' to make selections of system resources like logical volumes,
    disks and network interfaces (regular expression)
  * use of arrow-keys and PgUp/PgDown for vertical scroll
  * use of -> and <- keys for horizontal scroll of command line
  * support statistics for virtio disks (vd*)
  * fetching and displaying of individual threads
  * add various details about the memory usage of processes, like stack size,
    data size, shared library size and size used on swap
  * show new value about swap space usage per process
  * colors are shown now for separate system-level counters instead of for the
    entire line with counters
  * enhanced security: improved dropping of root privileges

-------------------------------------------------------------------
Mon Jan  9 18:45:42 UTC 2012 - pascal.bleser@opensuse.org

- remove licenses package mumbo-jumbo altogether
- use pristine upstream tarball instead of recompressing as bz2
- added Recommends for logrotate and cron in the -daemon subpackage

-------------------------------------------------------------------
Mon Jan  9 17:16:58 UTC 2012 - graham@andtech.eu

- change License: and %if statement in .spec

-------------------------------------------------------------------
Tue Mar 15 02:13:10 UTC 2011 - pascal.bleser@opensuse.org

- update to 1.26:
  * an additional value is shown for the current frequency and the current
    scaling percentage of the CPU
  * additional system-level counters are shown for the total number of threads
    that are running, sleeping interruptible, and sleeping uninterruptible
  * when the number of lines in a window is too small for the amount of
    system-level lines, the number of variable resources (like disks,
    interfaces, etc.) is limited automatically to be able to continue
  * the signal SIGUSR2 can be sent to atop to take one more sample and
    terminate (e.g. used to speed up suspend/hibernate)
  * support for the disk type 'mmcblk'

-------------------------------------------------------------------
Mon May  3 12:18:43 UTC 2010 - pascal.bleser@opensuse.org

- update to 1.25:
  * disk I/O statistics are maintained on level of logical volume
    (LVM) and MD device
  * log files are properly switched in case of suspend/hibernate
  * layout of lines with system-level statistics can be redefined
  * previous atop versions are automatically activated for older
    log files

-------------------------------------------------------------------
Tue Jan 26 08:59:08 UTC 2010 - pascal.bleser@opensuse.org

- update to 1.24:
  * the screen interface has been redesigned completely with
    support for a variable number of columns depending on the
    window size
  * it is now possible to define your own output line with
    process-level statistics
  * a system-wide configuration file was introduced for atop and
    atopsar
  * handling of log files was improved and additional counters are
    maintained

-------------------------------------------------------------------
Thu Mar  6 00:00:00 UTC 2008 - guru@unixtech.be

- update to 1.23

-------------------------------------------------------------------
Wed Nov 21 00:00:00 UTC 2007 - guru@unixtech.be

- update to 1.22

-------------------------------------------------------------------
Mon Aug 20 00:00:00 UTC 2007 - guru@unixtech.be

- update to 1.21

-------------------------------------------------------------------
Mon Jun 11 00:00:00 UTC 2007 - guru@unixtech.be

- inital openSUSE Build Service submission

Places

File atop.changes of Package atop

Places