File cups-filters.spec of Package cups-filters

Overview Repositories Revisions Requests Users Attributes Meta

File cups-filters.spec of Package cups-filters (Revision 04361cbd6a1ce30758645f2ad0430baf)

Currently displaying revision 04361cbd6a1ce30758645f2ad0430baf , Show latest

#
# spec file for package cups-filters
#
# Copyright (c) 2014 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.

# Please submit bugfixes or comments via http://bugs.opensuse.org/
#

Summary:        OpenPrinting CUPS filters, backends, and cups-browsed
License:        GPL-2.0 and GPL-2.0+ and GPL-3.0 and MIT
Group:          Hardware/Printing
Url:            http://www.linuxfoundation.org/collaborate/workgroups/openprinting/pdf_as_standard_print_job_format
# For a breakdown of the licensing, see COPYING file
# GPLv2:   filters: commandto*, imagetoraster, pdftops, rasterto*,
#                   imagetopdf, pstopdf, texttopdf
#         backends: parallel, serial
# GPLv2+:  filters: textonly, texttops, imagetops
# GPLv3:   filters: bannertopdf
# MIT:     filters: pdftoijs, pdftoopvp, pdftopdf, pdftoraster
Name:           cups-filters
# Normal version for official cups-filters releases is the upstream version (e.g. "Version: 1.0.49").
# For a current tarball cups-filters-1.0-yyyymmdd.tar.gz (e.g. cups-filters-1.0-20140326.tar.gz)
# the current tarball's date is added to the version to ensure a strictly increasing sequence
# "last version" < "current version" < "next version" e.g. "1.0.49" < "1.0.49.20140326" < "1.0.50"
# to verify this run: zypper vcmp 'last version' 'current version'
#       and also run: zypper vcmp 'next version' 'current version'
# e.g. zypper vcmp '1.0.49' '1.0.49.20140326' -> 1.0.49 is older than 1.0.49.20140326
#  and zypper vcmp '1.0.50' '1.0.49.20140326' -> 1.0.50 is newer than 1.0.49.20140326
Version:        1.0.49.20140326
Release:        0
# tarball_version is used below to specify the directory via "setup -n":
# Special tarball_version needed for current cups-filters e.g. "define tarball_version 9.10rc1".
# For official cups-filters releases tarball_version and version are the same (i.e. "define tarball_version %{version}")
# Special tarball_version needed for current cups-filters e.g. "define tarball_version 9.10rc1".
%define tarball_version 1.0-20140326
# The current tarball cups-filters-1.0-20140326.tar.gz is version 1.0.49
# plus the fix for https://bugs.linuxfoundation.org/show_bug.cgi?id=1187
# "cups-browsed must percent-encode component parts of the CUPS device-URI":
Source0:        http://www.openprinting.org/download/cups-filters/cups-filters-%{tarball_version}.tar.gz
# Since cups-filters version 1.0.42 foomatic-rip is also provided by cups-filters.
# The foomatic-rip version that is provided by cups-filters is not specified in the cups-filters sources
# but on http://www.openprinting.org/download/foomatic/ the foomatic-filters-4.0-current.tar.gz
# dated 27-Mar-2014 (i.e. from today as of this writing) contains a VERSION.full file that reads "4.0.17.256"
# so that foomatic_rip_version (macro name can be only alphanumeric and '_' i.e. "foomatic-rip_version" does not work)
# is defined here accordingly but with one more additional trailing number '.1' to ensure that
# the sub-package cups-filters-foomatic-rip (see below) conflicts with any foomatic-filters package:
#   zypper vcmp '4.0.17.256' '4.0.17.256.1' -> 4.0.17.256 is older than 4.0.17.256.1
#   zypper vcmp '4.0.17.257' '4.0.17.256.1' -> 4.0.17.257 is newer than 4.0.17.256.1
%define foomatic_rip_version 4.0.17.256.1
BuildRequires:  cups-devel
BuildRequires:  pkgconfig
# pdftopdf
BuildRequires:  qpdf-devel
# pdftops
BuildRequires:  poppler-tools
# pdftoijs, pdftoopvp, pdftoraster
BuildRequires:  libjpeg-devel
BuildRequires:  libpng-devel
BuildRequires:  libpoppler-cpp0
BuildRequires:  libpoppler-devel
BuildRequires:  libpoppler-glib-devel
BuildRequires:  libtiff-devel
BuildRequires:  zlib-devel
BuildRequires:  ghostscript-mini-devel
# libijs
BuildRequires:  fontconfig-devel
BuildRequires:  freetype2-devel
BuildRequires:  liblcms2-devel
# Make sure we get postscriptdriver tags.
BuildRequires:  python-cups
# cups-browsed
# "BuildRequires libavahi-devel" is insufficient
# (build fails at configure "checking for AVAHI_GLIB")
# "BuildRequires libavahi-gobject-devel" is too much
# (libavahi-gobject-devel requires libavahi-glib-devel and libavahi-devel)
# "BuildRequires libavahi-glib-devel" is sufficient
# (libavahi-glib-devel requires libavahi-devel)
BuildRequires:  libavahi-glib-devel
# autogen.sh
BuildRequires:  autoconf
BuildRequires:  automake
BuildRequires:  libtool
BuildRequires:  glibc-devel
BuildRequires:  gcc-c++
BuildRequires:  systemd
%systemd_requires
# test requires
BuildRequires:  dejavu-fonts
# Require the exact matching version-release of the cups-filters-ghostscript sub-package
# because all cups-filters software is built from one same source tar ball
# and there could be whatever subtle internal dependencies.
# The exact matching version-release of the cups-filters-ghostscript sub-package is available
# on the same package repository where the cups-filters main package is because
# all are built simulaneously from the same cups-filters source package
# and all required packages are provided on the same repository:
Requires:       cups-filters-ghostscript = %{version}-%{release}
# Conflict with CUPS < 1.6 because up to CUPS 1.5.4
# the following files are provided by the cups binary RPM package
# /usr/lib/cups/filter/commandtoescpx
# /usr/lib/cups/filter/commandtopclx
# /usr/lib/cups/filter/imagetops
# /usr/lib/cups/filter/imagetoraster
# /usr/lib/cups/filter/pdftops
# /usr/lib/cups/filter/rastertoescpx
# /usr/lib/cups/filter/rastertopclx
# /usr/lib/cups/filter/texttops
# /usr/lib/cups/backend/parallel
# /usr/lib/cups/backend/serial
# and the following files are provided by the cups-devel package
# /usr/share/cups/ppdc/escp.h
# /usr/share/cups/ppdc/pcl.h
Conflicts:      cups < 1.6
# /usr/bin/pdftops (provided by poppler-tools)
# is needed (but not required for non-PostScript printers)
# to print PDFs on PostScript printers because in this case
# the CUPS filter chain is:
#  /usr/lib/cups/filter/pdftopdf
#  /usr/lib/cups/filter/pdftops
#  where /usr/lib/cups/filter/pdftops calls /usr/bin/pdftops
#  /usr/lib/cups/backend/...
# see https://bugzilla.novell.com/show_bug.cgi?id=868148
Recommends:     poppler-tools

%description
Contains backends, filters, and other software
that was once part of the core CUPS distribution
but is no longer maintained by Apple Inc.
In addition it contains additional filters
and software developed independently of Apple,
especially filters for the PDF-centric printing
workflow introduced by OpenPrinting and a daemon
to browse Bonjour broadcasts of remote CUPS printers
and makes these printers available locally.

%package ghostscript
Summary:        OpenPrinting CUPS filters for Ghostscript
Group:          Hardware/Printing

%description ghostscript
Since Ghostscript version 9.10 the CUPS filters
gstoraster and gstopxl are removed from Ghostscript.
Those filters are now provided by cups-filters
(a free software package hosted by OpenPrinting).
The binary RPM sub-package cups-filters-ghostscript
provides only those CUPS filters for Ghostscript.
This way cups-filters-ghostscript can be used
with the traditional CUPS up to version 1.5.4
where the other filters, backends, and cups-browsed
from cups-filters would cause conflicts because
CUPS <= 1.5.4 already provides them. In contrast
for CUPS versions since 1.6 the whole cups-filters
is usually needed (but not strictly required).

%package foomatic-rip
Summary:        OpenPrinting CUPS filter foomatic-rip
Group:          Hardware/Printing
# Provide foomatic-filters with the exact foomatic_rip_version
# see https://bugzilla.novell.com/show_bug.cgi?id=870621
# and conflict with any other foomatic-filters version because
# the following files are also provided by foomatic-filters
# /usr/lib/cups/filter/foomatic-rip
# /usr/share/man/man1/foomatic-rip
Conflicts:      foomatic-filters < %{foomatic_rip_version}
Provides:       foomatic-filters = %{foomatic_rip_version}
Conflicts:      foomatic-filters > %{foomatic_rip_version}

%description foomatic-rip
Since cups-filters version 1.0.42 foomatic-rip is also
provided by cups-filters so that there is a file conflict
with the foomatic-filters package (both provide
/usr/lib/cups/filter/foomatic-rip and
/usr/share/man/man1/foomatic-rip). Therefore foomatic-rip
is separated in the sub-package cups-filters-foomatic-rip
and only that sub-package conflicts with foomatic-filters.

%package devel
Summary:        Development files for cups-filters
Group:          Development/Libraries/C and C++
Requires:       %{name} = %{version}
# Conflict with cups-devel < 1.6 because up to CUPS 1.5.4
# the following files are provided by the cups-devel package
# /usr/share/cups/ppdc/escp.h
# /usr/share/cups/ppdc/pcl.h
Conflicts:      cups-devel < 1.6

%description devel
This package contains the development files for cups-filters.

%prep
# Be quiet when unpacking and use a directory name matching Source0:
%setup -q -n cups-filters-%{tarball_version}

%build
# Just do what is described in the upstream INSTALL file
# unless there is a really good reason not to do it this way
# and then it is probably worth submitting an upstream issue report to
# https://bugs.linuxfoundation.org for "Product: OpenPrinting" and "Component: cups-filters"
./autogen.sh
# No need to set our preferred architecture-specific flags for the compiler and linker
# via export CFLAGS="$RPM_OPT_FLAGS" and export CXXFLAGS="$RPM_OPT_FLAGS"
# because the RPM macro configure does that.
# --with-pdftops=pdftops - use Poppler instead of Ghostscript (see README)
%configure --disable-static \
           --disable-silent-rules \
           --enable-shared \
           --enable-imagefilters \
           --with-pdftops=pdftops \
           --with-browseremoteprotocols=DNSSD,CUPS \
           --without-php \
	   --with-rcdir=no \
	   --with-test-font-path=/usr/share/fonts/truetype/DejaVuSans.ttf
# At least for now - until an expert may have had a look - using plain make
# instead of make with _smp_mflags because that caused sometimes strange build failures:
make

%check
# At least for now - until an expert may have had a look - using plain make
# instead of make with _smp_mflags because that caused sometimes strange build failures:
make check

%install
make install DESTDIR=%{buildroot}
# Rename installed /usr/share/cups/banners/* files
# and the installed /usr/share/cups/data/testprint
# because those files are also provided by CUPS
# but CUPS provides them in a different format and
# I (jsmeix@suse.de) not want to overwrite CUPS files but
# I do not like to delete the cups-filters version of those files 
# instead I like to provide them at least for now as well
# so that we could evaluate which ones we may use finally:
for B in classified confidential secret standard topsecret unclassified
do mv %{buildroot}%{_datadir}/cups/banners/$B %{buildroot}%{_datadir}/cups/banners/$B.cups-filters
done
mv %{buildroot}%{_datadir}/cups/data/testprint %{buildroot}%{_datadir}/cups/data/testprint.cups-filters
# https://fedoraproject.org/wiki/Packaging_tricks#With_.25doc
mkdir __doc
mv %{buildroot}%{_datadir}/doc/cups-filters/* __doc
rm -r %{buildroot}%{_datadir}/doc/cups-filters
mv fontembed/README __doc/fontembed.README
# Install the cups-browsed.service systemd unit file from the upstream sources:
mkdir -p %{buildroot}%{_unitdir}
install -p -m 644 utils/cups-browsed.service %{buildroot}%{_unitdir}
# Provide SUSE policy symlink /usr/sbin/rcFOO -> /etc/init.d/FOO
# /usr/sbin/service exists only since openSUSE 12.3:
%if 0%{?suse_version} > 1220
ln -s %{_sbindir}/service %{buildroot}%{_sbindir}/rccups-browsed
%else
ln -s /sbin/service %{buildroot}%{_sbindir}/rccups-browsed
%endif
# Don't ship libtool la files.
rm -f %{buildroot}%{_libdir}/lib*.la
# Not sure what is this good for
rm -f %{buildroot}%{_bindir}/ttfread

%pre
%service_add_pre cups-browsed.service
exit 0

%post
/sbin/ldconfig
%service_add_post cups-browsed.service
exit 0

%preun
%service_del_preun cups-browsed.service
exit 0

%postun
/sbin/ldconfig
%service_del_preun cups-browsed.service
exit 0

%pre ghostscript
# The CUPS filter gstoraster requires matching MIME conversion rules for CUPS
# otherwise CUPS would not know when to use the gstoraster filter.
# The cups-filters main package contains them in /usr/share/cups/mime/cupsfilters.convs
# but this contains all MIME conversion rules for the PDF printing workflow
# that is used for CUPS since version 1.6 but not for traditional CUPS <= 1.5.4.
# The cups-filters-ghostscript sub-package is explicitly intended to be used
# for traditional CUPS <= 1.5.4 (see the cups-filters-ghostscript sub-package description)
# so that we need to provide MIME conversion rules for gstoraster in a special way
# that gets overwritten when the cups-filters main package is installed
# after the cups-filters-ghostscript sub-package. Therefore we create
# the traditional MIME conversion rules for gstoraster that were provided
# in Ghostscript up to version 9.07 in /etc/cups/gstoraster.convs but
# we use the MIME conversions file /usr/share/cups/mime/cupsfilters.convs
# that is also used by the cups-filters main package so that its installation
# will overwrite the traditional MIME conversion rules for gstoraster
# by the new MIME conversion rules from cups-filters. To be on the safe side
# do not overwrite an existing /usr/share/cups/mime/cupsfilters.convs file
# (e.g. when cups-filters was installed before cups-filters-ghostscript).
# Do nothing when /usr/share/cups/mime/ does not exist (e.g. when CUPS is not installed).
if test -e %{_datadir}/cups/mime/cupsfilters.convs
then exit 0
fi
if test -d %{_datadir}/cups/mime/
then echo '# traditional CUPS <= 1.5.4 MIME conversion rules for the gstoraster filter' >%{_datadir}/cups/mime/cupsfilters.convs
     echo 'application/vnd.cups-pdf application/vnd.cups-raster 66 gstoraster' >>%{_datadir}/cups/mime/cupsfilters.convs
     echo 'application/vnd.cups-postscript application/vnd.cups-raster 100 gstoraster' >>%{_datadir}/cups/mime/cupsfilters.convs
fi
exit 0

%files
# The files sections list all mandatory files explicitly one by one.
# In particular all executables are listed explicitly.
# This avoids that whatever configure magic might silently
# not build and install an executable when whatever condition
# for configure's automated tests is not fulfilled in the build system,
# (cf. https://bugzilla.novell.com/show_bug.cgi?id=526847#c9).
# When all mandatory files are explicitly listed,
# the build fails intentionally if a mandatory file was not built
# which ensures that already existing correctly built binary RPMs
# are not overwritten by broken RPMs where mandatory files are missing.
%defattr(-,root,root)
%doc __doc/README __doc/AUTHORS __doc/NEWS __doc/COPYING __doc/fontembed.README
%config(noreplace) %{_sysconfdir}/fonts/conf.d/99pdftoopvp.conf
%config(noreplace) %{_sysconfdir}/cups/cups-browsed.conf
%{_sbindir}/cups-browsed
%{_sbindir}/rccups-browsed
%{_unitdir}/cups-browsed.service
%dir /usr/lib/cups
%dir /usr/lib/cups/backend
%attr(0755,root,root) /usr/lib/cups/backend/parallel
# Serial backend needs to run as root
# see https://bugzilla.redhat.com/show_bug.cgi?id=212577#c4
%attr(0700,root,root) /usr/lib/cups/backend/serial
%dir /usr/lib/cups/filter
%attr(0755,root,root) /usr/lib/cups/filter/bannertopdf
%attr(0755,root,root) /usr/lib/cups/filter/commandtoescpx
%attr(0755,root,root) /usr/lib/cups/filter/commandtopclx
%attr(0755,root,root) /usr/lib/cups/filter/imagetopdf
%attr(0755,root,root) /usr/lib/cups/filter/imagetops
%attr(0755,root,root) /usr/lib/cups/filter/imagetoraster
%attr(0755,root,root) /usr/lib/cups/filter/pdftoijs
%attr(0755,root,root) /usr/lib/cups/filter/pdftoippprinter
%attr(0755,root,root) /usr/lib/cups/filter/pdftoopvp
%attr(0755,root,root) /usr/lib/cups/filter/pdftopdf
%attr(0755,root,root) /usr/lib/cups/filter/pdftops
%attr(0755,root,root) /usr/lib/cups/filter/pdftoraster
%attr(0755,root,root) /usr/lib/cups/filter/pstopdf
%attr(0755,root,root) /usr/lib/cups/filter/rastertoescpx
%attr(0755,root,root) /usr/lib/cups/filter/rastertopclx
%attr(0755,root,root) /usr/lib/cups/filter/textonly
%attr(0755,root,root) /usr/lib/cups/filter/texttopdf
%attr(0755,root,root) /usr/lib/cups/filter/texttops
%attr(0755,root,root) /usr/lib/cups/filter/urftopdf
%dir %{_datadir}/cups
%{_datadir}/cups/banners
%{_datadir}/cups/charsets
%dir %{_datadir}/cups/data
%{_datadir}/cups/data/*
%dir %{_datadir}/cups/drv
%{_datadir}/cups/drv/cupsfilters.drv
%dir %{_datadir}/cups/mime
%{_datadir}/cups/mime/cupsfilters.types
%{_datadir}/cups/mime/cupsfilters.convs
%dir %{_datadir}/ppd
%{_datadir}/ppd/cupsfilters
%attr(0755,root,root) %{_libdir}/libcupsfilters.so.*
%attr(0755,root,root) %{_libdir}/libfontembed.so.*
%{_mandir}/man5/cups-browsed.conf.5.gz
%{_mandir}/man8/cups-browsed.8.gz

%files ghostscript
# "ldd /usr/lib/cups/filter/gstoraster | grep cups" shows that
# gstoraster is not linked with /usr/lib/libcupsfilters.so.*
# so that it is o.k. not to have libcupsfilters.so.*
# in the cups-filters-ghostscript sub-package and
# the cups-filters-ghostscript sub-package would still not
# have a RPM requirement for the cups-filters main package
# which would cause file conflicts with CUPS <= 1.5.4
# see the cups-filters-ghostscript sub-package description.
# /usr/lib/cups/filter/gstopxl is a bash script.
%defattr(-,root,root)
%dir /usr/lib/cups
%dir /usr/lib/cups/filter
%attr(0755,root,root) /usr/lib/cups/filter/gstoraster
%attr(0755,root,root) /usr/lib/cups/filter/gstopxl

%files foomatic-rip
%{_mandir}/man1/foomatic-rip.1.gz
%defattr(-,root,root)
%dir /usr/lib/cups
%dir /usr/lib/cups/filter
%attr(0755,root,root) /usr/lib/cups/filter/foomatic-rip

%files devel
%defattr(-,root,root)
%dir %{_datadir}/cups/ppdc
%{_datadir}/cups/ppdc/pcl.h
%{_datadir}/cups/ppdc/escp.h
%{_libdir}/libcupsfilters.so
%{_libdir}/libfontembed.so
%{_libdir}/pkgconfig/libcupsfilters.pc
%{_libdir}/pkgconfig/libfontembed.pc
%{_includedir}/cupsfilters
%{_includedir}/fontembed

%changelog

Places

File cups-filters.spec of Package cups-filters (Revision 04361cbd6a1ce30758645f2ad0430baf)

Places