File yast2-storage-ng.changes of Package yast2-storage-ng

Overview Repositories Revisions Requests Users Attributes Meta

File yast2-storage-ng.changes of Package yast2-storage-ng (Revision 90f4aa38c17ff269d3bb13d38787e7a9)

Currently displaying revision 90f4aa38c17ff269d3bb13d38787e7a9 , Show latest

-------------------------------------------------------------------
Thu Aug  6 12:00:08 UTC 2020 - Ancor Gonzalez Sosa <ancor@suse.com>

- AutoinstProposal now properly reports the proposal as failed when
  it fails to find the disks (bsc#1174469)
- 4.3.14

-------------------------------------------------------------------
Wed Aug  5 15:06:26 UTC 2020 - Ancor Gonzalez Sosa <ancor@suse.com>

- Proposal: fixed detection of shadowed subvolumes for roles using
  separate LVM volume groups for each filesystem (bsc#1174475).
- 4.3.13

-------------------------------------------------------------------
Fri Jul 17 11:44:48 UTC 2020 - David Diaz <dgonzalez@suse.com>

- Partitioner: fix stripes size reported for thin LVs.
- Partitioner: do not show stripes size when its value is zero.

-------------------------------------------------------------------
Tue Jul  7 10:57:59 UTC 2020 - David Diaz <dgonzalez@suse.com>

- Partitioner: fix and improve the information shown for each
  type of LVM logical volumes.
- Partitioner: makes visible the relationship between an LVM
  snapshot and its original logical volume (related to
  bsc#1120410).
- Partitioner: warn the user before performing certain actions
  on an LVM snapshot.
- 4.3.12

-------------------------------------------------------------------
Fri Jul  3 12:31:39 UTC 2020 - José Iván López González <jlopez@suse.com>

- AutoYaST: delegate to initial guided proposal when no partitions
  are defined in the profile (bsc#1173610).
- AutoYaST: fix enable_snapshots option.
- 4.3.11

-------------------------------------------------------------------
Tue Jun 30 09:18:15 CEST 2020 - aschnell@suse.com

- install nvme-cli if NVMe devices are present (bsc#1172866)
- 4.3.10

-------------------------------------------------------------------
Fri Jun 26 14:02:34 UTC 2020 - Ancor Gonzalez Sosa <ancor@suse.com>

- Ensure consistent removal of LVM snapshots when the origin LV
  is deleted (related to bsc#1120410).
- 4.3.9

-------------------------------------------------------------------
Wed Jun 10 14:26:28 UTC 2020 - David Diaz <dgonzalez@suse.com>

- Partitioner: does not warn the user when the BIOS Boot partition
  is missing in a XEN guest.

-------------------------------------------------------------------
Thu May 19 15:22:56 CEST 2020 - schubi@suse.de

- AutoYaST: Cleanup/improve issue handling (bsc#1171335).
- 4.3.8

-------------------------------------------------------------------
Mon May 18 15:15:02 CEST 2020 - aschnell@suse.com

- added translation for new resize blocking reason (bsc#1172164)
- 4.3.7

-------------------------------------------------------------------
Fri May 15 09:17:09 UTC 2020 - Steffen Winterfeldt <snwint@suse.com>

- ensure crypttab entries use correct mount_by variant (bsc#1165702)
- 4.3.6

-------------------------------------------------------------------
Tue May 12 11:08:12 UTC 2020 - Ancor Gonzalez Sosa <ags@localhost>

- Partitioner: fixed a crash when libstorage-ng fails to report
  the block device of an LVM PV, which is a consequence of a wrong
  multipath setup (bsc#1170216).
- 4.3.5

-------------------------------------------------------------------
Mon May 11 07:48:59 UTC 2020 - Steffen Winterfeldt <snwint@suse.com>

- remove obsolete proposal_settings_editable (bsc#1171423)
- 4.3.4

-------------------------------------------------------------------
Wed Apr 29 08:26:48 UTC 2020 - Steffen Winterfeldt <snwint@suse.com>

- add x-initrd.attach option to crypttab if needed (bsc#1168465)
- 4.3.3

-------------------------------------------------------------------
Thu Apr 23 14:32:38 UTC 2020 - Steffen Winterfeldt <snwint@suse.com>

- update /etc/crypttab status properly (bsc#1118977)
- 4.3.2

-------------------------------------------------------------------
Wed Apr 22 13:29:05 CEST 2020 - aschnell@suse.com

- disallow to edit LVM cache pools (related to bsc#1099744)
- 4.3.1

-------------------------------------------------------------------
Fri Apr 17 15:08:48 UTC 2020 - David Diaz <dgonzalez@suse.com>

- Fix the severity of some boot checks, making them warnings
  instead of errors.

-------------------------------------------------------------------
Fri Apr 17 11:45:31 UTC 2020 - Ancor Gonzalez Sosa <ancor@suse.com>

- Proposal: in the initial attempt, consider only a reasonable
  number of disks (bsc#1154070).
- Proposal: speed up the initial attempt when "allocate_volume_mode"
  is set to "device" in the control file (part of jsc#SLE-7238).
- 4.3.0

-------------------------------------------------------------------
Wed Apr 15 11:10:16 UTC 2020 - Steffen Winterfeldt <snwint@suse.com>

- rework VFAT mount option handling (bsc#1161771)

-------------------------------------------------------------------
Mon Apr 06 09:14:25 CEST 2020 - aschnell@suse.com

- allow to disable LUKS activation (bsc#1162545)
- 4.2.107

-------------------------------------------------------------------
Fri Apr  3 14:18:30 UTC 2020 - Ancor Gonzalez Sosa <ancor@suse.com>

- Partitioner: fixed a crash when some devices are modified both
  before and after reprobing the hardware (bsc#1168325).
- 4.2.106

-------------------------------------------------------------------
Wed Apr  1 12:27:01 UTC 2020 - Ancor Gonzalez Sosa <ancor@suse.com>

- Never add the _netdev option to fstab for the root mount point
  (bsc#1165937).
- 4.2.105

-------------------------------------------------------------------
Fri Mar 27 13:14:08 UTC 2020 - Ancor Gonzalez Sosa <ancor@suse.com>

- Reverted the changes done to support the calculation of udev
  links from yast2-bootloader, since the changes in that module
  were also reverted. See previous entries for versions 4.2.90
  and 4.2.102.
- Related to bsc#1167779, bsc#1166096 and bsc#1151075.
- 4.2.104

-------------------------------------------------------------------
Thu Mar 26 15:18:33 CET 2020 - aschnell@suse.com

- Reanimate saving USED_FS_LIST (bsc#1161533).
- 4.2.103

-------------------------------------------------------------------
Wed Mar 25 07:23:03 UTC 2020 - Ancor Gonzalez Sosa <ancor@suse.com>

- Extend and improve the API to get udev names for a block device
  (needed for bsc#1166096).
- 4.2.102

-------------------------------------------------------------------
Mon Mar 23 17:36:02 UTC 2020 - David Diaz <dgonzalez@suse.com>

- Prevents to put /boot in a bcache (bsc#1165903).
- 4.2.101

-------------------------------------------------------------------
Fri Mar 20 12:25:12 UTC 2020 - Imobach Gonzalez Sosa <igonzalezsosa@suse.com>

- AutoYaST: show an error when no suitable components are found
  for Bcache, Btrfs multi-devices filesystems, and RAID devices
  (bsc#1167053).
- 4.2.100

-------------------------------------------------------------------
Thu Mar 19 11:16:31 UTC 2020 - Ancor Gonzalez Sosa <ancor@suse.com>

- Partitioner: do not allow to clone a partition table to another
  device with a different block size (bsc#1166363)
- 4.2.99

-------------------------------------------------------------------
Wed Mar 18 16:37:28 UTC 2020 - Ancor Gonzalez Sosa <ancor@suse.com>

- Restricted the scenarios in which software-defined RAIDs are
  eligible as target devices for the proposal. Do it only in systems
  with EFI (bsc#1166258).
- 4.2.98

-------------------------------------------------------------------
Fri Mar 13 14:02:15 UTC 2020 - Steffen Winterfeldt <snwint@suse.com>

- write nocow attribute correctly into YAML
- 4.2.97

-------------------------------------------------------------------
Thu Mar 12 11:51:13 UTC 2020 - Imobach Gonzalez Sosa <igonzalezsosa@suse.com>

- AutoYaST: report the user when conflicting attributes are set
  in a partition section (i.e., mount, raid_name, lvm_group,
  btrfs_name, bcache_backing_for and bcache_caching_for)
  (bsc#1165907).
- 4.2.96

-------------------------------------------------------------------
Wed Mar 11 12:53:13 UTC 2020 - Ancor Gonzalez Sosa <ancor@suse.com>

- Usability improvements when asking the user to install packages
  during the probing phase (related to bsc#1140040).
- More flexible API for PackageHandler and related classes
- More libstorage-ng "storage features" now recognized and handled
  if needed: UF_DASD, UF_BITLOCKER, UF_JFS, UF_F2FS, UF_EXFAT.
- Partitioner: better error reporting when the installation of
  needed packages fails.
- 4.2.95

-------------------------------------------------------------------
Mon Mar  9 09:53:50 UTC 2020 - Imobach Gonzalez Sosa <igonzalezsosa@suse.com>

- AutoYaST: show an error when no suitable physical volumes are
  found for a given volume group (bsc#1162043).
- 4.2.94

-------------------------------------------------------------------
Thu Mar  5 10:23:24 UTC 2020 - José Iván López González <jlopez@suse.com>

- Fix unit tests for the progress dialog added in version 4.2.82
  (related to bsc#1135366).
- 4.2.93

-------------------------------------------------------------------
Tue Mar  3 12:56:34 UTC 2020 - Imobach Gonzalez Sosa <igonzalezsosa@suse.com>

- AutoYaST: export the 'disklabel' attribute for software RAID
  devices.
- AutoYaST: include a 'partitions' section when exporting an
  unpartitioned software RAID which is not used as a filesystem
  (bsc#1159201).
- 4.2.92

-------------------------------------------------------------------
Fri Feb 28 17:05:15 UTC 2020 - José Iván López González <jlopez@suse.com>

- Partitioner: allow to select APQNs when encrypting with pervasive
  encryption (jsc#SLE-7376).
- 4.2.91
-------------------------------------------------------------------
Thu Feb 20 16:02:54 UTC 2020 - José Iván López González <jlopez@suse.com>

- Add API methods to get preferred mount by option and the
  associated device path.
- 4.2.90

-------------------------------------------------------------------
Thu Feb 20 14:37:41 CET 2020 - aschnell@suse.com

- allow to install packages needed for probing
- 4.2.89

-------------------------------------------------------------------
Wed Feb 19 10:49:56 UTC 2020 - Ancor Gonzalez Sosa <ancor@suse.com>

- Proposal: fixed the infinite loop when trying to create a new
  partition out of the candidate devices (related to bsc#1161331
  and bsc#1161678).
- 4.2.88

-------------------------------------------------------------------
Tue Feb 18 15:04:21 UTC 2020 - José Iván López González <jlopez@suse.com>

- Partitioner: do no show button for editing devices when the
  device cannot be used as block device (bsc#1163597).
- Revert changes from 4.2.85.
- 4.2.87

-------------------------------------------------------------------
Tue Feb 18 11:59:05 UTC 2020 - Ancor Gonzalez Sosa <ancor@suse.com>

- Initial Guided Proposal: place the boot-related partitions in
  the device choosen for root, even if it's a software RAID
  (bsc#1161331, bsc#1161678).
- 4.2.86

-------------------------------------------------------------------
Tue Feb 18 10:26:02 UTC 2020 - José Iván López González <jlopez@suse.com>

- Partitioner: do not allow to edit a device when the device cannot
  be used as block device (bsc#1163597).
- 4.2.85

-------------------------------------------------------------------
Wed Feb 12 09:53:44 CET 2020 - aschnell@suse.com

- added texts for RAID1C3 and RAID1C4 as required by
  gh#openSUSE/libstorage-ng#706 (related to jsc#SLE-3877)
- 4.2.84

-------------------------------------------------------------------
Wed Feb  5 12:38:51 UTC 2020 - David Diaz <dgonzalez@suse.com>

- Partitioner: usability improved by remembering the last active
  tab and selected device per page (bsc#1159883).
- 4.2.83

-------------------------------------------------------------------
Tue Feb  4 12:09:51 UTC 2020 - José Iván López González <jlopez@suse.com>

- Partitioner: add a new progress dialog instead of simply closing
  when applying the changes in a running system (bsc#1135366).
- 4.2.82

-------------------------------------------------------------------
Fri Jan 31 16:49:28 UTC 2020 - Ancor Gonzalez Sosa <ancor@suse.com>

- Partitioner: the button to delete all partitions does no longer
  fail for devices containing logical partitions (bsc#1162290).
- 4.2.81

-------------------------------------------------------------------
Tue Jan 29 10:00:18 UTC 2020 - Christopher Hofmann <cwh@suse.com>

- Added package requirement for UF_PLAIN_ENCRYPTION (bsc#1160773)
- 4.2.80

-------------------------------------------------------------------
Tue Jan 28 20:20:50 CET 2020 - aschnell@suse.com

- also mask swap units in mask-systemd-units (bsc#1152545)
- 4.2.79

-------------------------------------------------------------------
Fri Jan 24 14:08:28 CET 2020 - aschnell@suse.com

- reduce min height of dialogs (bsc#1161651)
- drop noatime, acl and xattr options in "Fstab Options" dialog
  (bsc#1135723)
- change mount by method to combobox in "Fstab Options" dialog
  (bsc#1135723)
- 4.2.78

-------------------------------------------------------------------
Thu Jan 23 15:56:36 UTC 2020 - Ancor Gonzalez Sosa <ancor@suse.com>

- Avoided crash when libstorage-ng provides a non-UTF string as
  partition id (bsc#1161442).
- 4.2.77

-------------------------------------------------------------------
Tue Jan 21 12:11:46 UTC 2020 - aschnell@suse.com

- added warning before resizing block devices which were probed
  empty (related to bsc#1159318)
- 4.2.76

-------------------------------------------------------------------
Tue Jan 21 11:34:31 UTC 2020 - Ancor Gonzalez Sosa <ancor@suse.com>

- Guided Setup: enforced a consistent width for both password
  fields (bsc#1161202)
- 4.2.75

-------------------------------------------------------------------
Fri Jan 17 14:54:37 UTC 2020 - David Diaz <dgonzalez@suse.com>

- Partitioner: make it possible to directly work with devices
  from the overview/system page (related to fate#318196).
- 4.2.74

-------------------------------------------------------------------
Thu Jan 16 11:48:39 UTC 2020 - José Iván López González <jlopez@suse.com>

- Improve integration with yast2-nfs-client.
- Related bugs: bsc#1006815, bsc#1151426.
- 4.2.73

-------------------------------------------------------------------
Wed Jan 15 22:07:30 CET 2020 - aschnell@suse.com

- treat partitions with BitLocker as Windows (related to
  bsc#1159318)
- 4.2.72

-------------------------------------------------------------------
Tue Jan 14 20:52:30 CET 2020 - aschnell@suse.com

- use udevadm in /usr/bin instead of /sbin (bsc#1160890)
- use absolute paths in mask-systemd-units
- 4.2.71

-------------------------------------------------------------------
Tue Jan 14 09:54:08 CET 2020 - aschnell@suse.com

- do not allow block sizes bigger than the system page size when
  creating xfs (bsc#1111668)
- check inode size depending on block size when creating xfs
- 4.2.70

-------------------------------------------------------------------
Thu Jan 09 12:45:00 CET 2020 - aschnell@suse.com

- disallow to mount BitLocker (related to bsc#1159318)
- 4.2.69

-------------------------------------------------------------------
Tue Jan  7 09:10:11 UTC 2020 - José Iván López González <jlopez@suse.com>

- Use partition id names defined by libstorage-ng.
- 4.2.68

-------------------------------------------------------------------
Mon Dec 23 08:29:03 CET 2019 - aschnell@suse.com

- Improved sorting by device name and size in tables (bsc#1140018)
- 4.2.67

-------------------------------------------------------------------
Fri Dec 20 16:20:29 UTC 2019 - Ancor Gonzalez Sosa <ancor@suse.com>

- Fixed an error when applying fallback_max_size_lvm in some corner
  cases (bsc#1075990).
- 4.2.66

-------------------------------------------------------------------
Thu Dec 19 14:22:49 UTC 2019 - Imobach Gonzalez Sosa <igonzalezsosa@suse.com>

- AutoYaST: use the multipath device when the 'device' element
  points to one of its wires (bsc#1159081).
- 4.2.65

-------------------------------------------------------------------
Tue Dec 17 12:48:40 UTC 2019 - Josef Reidinger <jreidinger@suse.com>

- Wrap long details message when error happens (bsc#1085468)
- 4.2.64

-------------------------------------------------------------------
Fri Dec 13 16:37:32 UTC 2019 - Ancor Gonzalez Sosa <ancor@suse.com>

- Improved support for Raspberry Pi in the Guided Proposal: now it
  also works without preexisting firmware partition (jsc#SLE-7298)
- 4.2.63

-------------------------------------------------------------------
Wed Dec 11 15:19:00 UTC 2019 - José Iván López González <jlopez@suse.com>

- Show device name when activating a LUKS device (related to
  bsc#1125774).
- 4.2.62

-------------------------------------------------------------------
Tue Dec 10 15:32:05 UTC 2019 - José Iván López González <jlopez@suse.com>

- Generate encryption names according to the mount point of the
  encryption device (bsc#1125774).
- 4.2.61

-------------------------------------------------------------------
Wed Dec  4 12:17:37 UTC 2019 - José Iván López González <jlopez@suse.com>

- Improve detection of Windows systems (related to bsc#1135341).
- 4.2.60

-------------------------------------------------------------------
Wed Nov 27 13:53:57 UTC 2019 - Christopher Hofmann <cwh@suse.com>

- Set passno to 2 for the ESP (bsc#1135523)
- 4.2.59

-------------------------------------------------------------------
Mon Nov 25 12:21:07 UTC 2019 - José Iván López González <jlopez@suse.com>

- Detect root mount point probed as inactive (e.g., as result of a
  snapshot rollback without rebooting the system).
- Related to bsc#1124581.
- 4.2.58

-------------------------------------------------------------------
Thu Nov 21 16:10:22 UTC 2019 - Ancor Gonzalez Sosa <ancor@suse.com>

- Fixed a wrong check that was preventing the installation of some
  needed packages (bsc#1151148).
- 4.2.57

-------------------------------------------------------------------
Thu Nov 14 16:23:39 UTC 2019 - Ancor Gonzalez Sosa <ancor@suse.com>

- Propagate the noauto, nofail and _netdev options from fstab
  to crypttab (needed for jsc#SLE-7687).
- Add the _netdev option to fstab for mount points on top of a
  network-based device like iSCSI or FCoE (jsc#SLE-7687).
- 4.2.56

-------------------------------------------------------------------
Tue Nov 12 11:27:38 UTC 2019 - Imobach Gonzalez Sosa <igonzalezsosa@suse.com>

- AutoYaST: allow to inject settings for the guided proposal
  (related to boo#1156539).
- 4.2.55

-------------------------------------------------------------------
Wed Nov  6 11:49:35 UTC 2019 - Imobach Gonzalez Sosa <igonzalezsosa@suse.com>

- AutoYaST: do not repeat filesystem related information when
  cloning multidevice Btrfs filesystems (bsc#1148578).
- AutoYaST: do not export the enable_snapshots element for drives
  which do not contain the root filesystem.
- 4.2.54

-------------------------------------------------------------------
Wed Oct 30 09:55:48 UTC 2019 - Imobach Gonzalez Sosa <igonzalezsosa@suse.com>

- AutoYaST: add support to set the encryption method (related to
  jsc#SLE-7376).
- 4.2.53

-------------------------------------------------------------------
Mon Oct 28 14:22:24 CET 2019 - aschnell@suse.com

- fix creation of secure key for new partitions (bsc#1154267)
- 4.2.52

-------------------------------------------------------------------
Wed Oct 23 11:51:58 UTC 2019 - Imobach Gonzalez Sosa <igonzalezsosa@suse.com>

- AutoYaST: consider CT_DMMULTIPATH an alias of CT_DISK (related
  to bsc#1130988).
- 4.2.51

-------------------------------------------------------------------
Fri Oct 18 21:01:14 UTC 2019 - Imobach Gonzalez Sosa <igonzalezsosa@suse.com>

- Fix translation of some encryption related widgets (bsc#1154364).
- 4.2.50

-------------------------------------------------------------------
Fri Oct 18 15:20:01 UTC 2019 - Imobach Gonzalez Sosa <igonzalezsosa@suse.com>

- Avoid false warning about booting from LUKS2 in s390
  (related to jsc#SLE-7376).

-------------------------------------------------------------------
Wed Oct 16 14:09:42 UTC 2019 - Ancor Gonzalez Sosa <ancor@suse.com>

- If a given device cannot be mounted by the method configured as
  default, try to find the most stable alternative instead of just
  using the device kernel name (bsc#1151075).
- Improved support for volatile encryption (related to
  jsc#SLE-7376).
- Partitioner: more accurate mount_by options in Fstab Options.
- 4.2.49

-------------------------------------------------------------------
Wed Oct 16 11:40:56 UTC 2019 - Imobach Gonzalez Sosa <igonzalezsosa@suse.com>

- Set sector size to 4k for encrypted devices which underlying
  device is, at least, 4k too (jsc#SLE-7376).
- 4.2.48

-------------------------------------------------------------------
Fri Oct 11 14:26:23 CEST 2019 - aschnell@suse.com

- Added translation for new enum value RB_PASSWORD_REQUIRED
  (bsc#1153871).
- 4.2.47

-------------------------------------------------------------------
Fri Oct  4 11:07:07 UTC 2019 - Ancor Gonzalez Sosa <ancor@suse.com>

- AutoYaST: do not include the uuid field in the <partition>
  sections when cloning a system (bsc#1148477, bsc#1152535).
- 4.2.46

-------------------------------------------------------------------
Thu Oct  3 16:58:02 UTC 2019 - Ancor Gonzalez Sosa <ancor@suse.com>

- AutoYaST: do not fail if the uuid is specified for a new
  filesystem (bsc#1148477, bsc#1152535).
- AutoYaST: partitions and logical volumes to be reused can now be
  found by uuid (bsc#1148477, bsc#1152535).

-------------------------------------------------------------------
Wed Oct  2 13:35:42 UTC 2019 - David Diaz <dgonzalez@suse.com>

- Partitioner: fix the type column value for Ext3/4 filesystems
  with an external journal (bsc#1145841).
- Do not crash when importing mount points from a multi-device
  filesystem.
- 4.2.45

-------------------------------------------------------------------
Wed Oct  2 08:46:10 UTC 2019 - Ancor Gonzalez Sosa <ancor@suse.com>

- At the end of installation, copy the pervasive encryption keys
  to the zkey repository of the target system (jsc#SLE-7376).
- 4.2.44

-------------------------------------------------------------------
Tue Oct 01 11:19:20 CEST 2019 - aschnell@suse.com

- implemented detection of pervasive encryption (for jsc#SLE-7376)
- 4.2.43

-------------------------------------------------------------------
Wed Sep 25 08:09:53 UTC 2019 - José Iván López González <jlopez@suse.com>

- Partitioner: allow encrypting swap with protected and secure
  keys (part of jsc#SLE-7376).
- Partitioner: allow importing mount points from encrypted swap
  with protected and secure keys.
- 4.2.42

-------------------------------------------------------------------
Mon Sep 23 11:08:38 UTC 2019 - David Diaz <dgonzalez@suse.com>

- Partitioner: allows encrypting volumes using pervasive
  encryption (jsc#SLE-7376).
- 4.2.41

-------------------------------------------------------------------
Thu Sep 19 07:57:35 UTC 2019 - David Diaz <dgonzalez@suse.com>

- Partitioner: allow creating encrypted swap with random
  password (bsc#1088641).
- Partitioner: allow importing mount points from encrypted swap
  with random password.
- Storage: fix an encryption type inconsistency (bsc#1151079).
- 4.2.40

-------------------------------------------------------------------
Tue Sep 17 14:41:01 UTC 2019 - Steffen Winterfeldt <snwint@suse.com>

- add warning if /boot is on a LUKS2 encrypted partition
- 4.2.39

-------------------------------------------------------------------
Thu Sep  5 15:03:50 UTC 2019 - Ancor Gonzalez Sosa <ancor@suse.com>

- Partitioner: better handling of existing encryptions, including
  the possibility of reusing them (related to jsc#SLE-7376).

-------------------------------------------------------------------
Wed Sep 04 14:46:12 CEST 2019 - aschnell@suse.com

- added translation for new EncryptionType::PLAIN (bsc#1088641)
- 4.2.38

-------------------------------------------------------------------
Fri Aug 30 09:25:52 UTC 2019 - Steffen Winterfeldt <snwint@suse.com>

- bind-mount /run from inst-sys to target system during install (bsc#1136463)
- 4.2.37

-------------------------------------------------------------------
Wed Aug 28 15:13:44 UTC 2019 - Ancor Gonzalez Sosa <ancor@suse.com>

- Partitioner: display encryption type (related to jsc#SLE-7376).
- 4.2.36

-------------------------------------------------------------------
Thu Aug 22 12:58:12 CEST 2019 - schubi@suse.de

- Using rb_default_ruby_abi tag in the spec file in order to
  handle several ruby versions (bsc#1146403).
- 4.2.35

-------------------------------------------------------------------
Wed Aug 21 11:11:06 UTC 2019 - Steffen Winterfeldt <snwint@suse.com>

- log all ng proposal settings
- 4.2.34

-------------------------------------------------------------------
Sat Aug 10 22:00:06 UTC 2019 - David Diaz <dgonzalez@suse.com>

- Initial Guided Proposal: added support to make the proposal
  using all candidates devices, without trying all possible set
  of settings for each individual device first (related to
  jsc#SLE-7238).
- 4.2.33

-------------------------------------------------------------------
Thu Aug  8 10:37:33 UTC 2019 - José Iván López González <jlopez@suse.com>

- AutoYaST: allow to create a Bcache without a caching device.
- AutoYaST: allow to create a Bcache over a LVM Logical Volume.
- bsc#1139783
- 4.2.32

-------------------------------------------------------------------
Wed Aug  7 09:29:06 UTC 2019 - Steffen Winterfeldt <snwint@suse.com>

- fix NilClass issue when calculating proposal on RAID (bsc#1139808)
- 4.2.31

-------------------------------------------------------------------
Mon Jul 29 21:52:18 CEST 2019 - aschnell@suse.com

- Fixed exception when removing devices from btrfs (bsc#1142669)
- Sort selected devices in LVM VG and btrfs dialog by name
- 4.2.30

-------------------------------------------------------------------
Thu Jul 18 15:11:15 UTC 2019 - Ancor Gonzalez Sosa <ancor@suse.com>

- Fixed some errors calculating the initial proposal, before the
  user has executed the Guided Setup (related to jsc#SLE-7238).
- 4.2.29

-------------------------------------------------------------------
Mon Jul 15 13:32:36 UTC 2019 - Stefan Hundhammer <shundhammer@suse.com>

- Complain if user attempts to put /boot on a thin LVM or a BCache
  (bsc#1134130)
- 4.2.28

-------------------------------------------------------------------
Fri Jul 12 12:24:36 UTC 2019 - David Diaz <dgonzalez@suse.com>

- Guided Setup: added support for the new control file option
  "allocate_volume_mode". When set to "device", this option allows
  the user to specify a device per each volume (part of
  jsc#SLE-7238).
- 4.2.27

-------------------------------------------------------------------
Wed Jul 10 11:31:18 UTC 2019 - José Iván López González <jlopez@suse.com>

- Add execute permissions to test files (bsc#1141006).

-------------------------------------------------------------------
Tue Jul  9 14:15:16 UTC 2019 - José Iván López González <jlopez@suse.com>

- For Z Systems, the option to enlarge swap for suspend is always
  disabled by default, independently of its value in the control
  file (part of jsc#SLE-6926).
- 4.2.26

-------------------------------------------------------------------
Tue Jul  9 13:20:26 UTC 2019 - Stefan Hundhammer <shundhammer@suse.com>

- AutoYaST: Fixed typo in filesystem type that caused a crash
  (bsc#1136272)
- 4.2.25

-------------------------------------------------------------------
Mon Jul  8 11:52:43 UTC 2019 - José Iván López González <jlopez@suse.com>

- AutoYaST: do not delete related partitions if they are not
  specifically requested (related to bsc#1096760).
- 4.2.24

-------------------------------------------------------------------
Fri Jul  5 14:04:00 UTC 2019 - José Iván López González <jlopez@suse.com>

- Proposal: add control file option to make configurable to resize
  and delete partitions (part of jsc#SLE-7238).
- 4.2.23

-------------------------------------------------------------------
Mon Jul  1 11:12:13 UTC 2019 - José Iván López González <jlopez@suse.com>

- Partitioner: fix importing mount points from a multi-device
  Btrfs filesystem (bsc#1137997).
- 4.2.22

-------------------------------------------------------------------
Mon Jul  1 10:28:48 UTC 2019 - Josef Reidinger <jreidinger@suse.com>

- adopt new rubocop to be able to use the latest ruby features
  (bsc#1139270)
- 4.2.21

-------------------------------------------------------------------
Tue Jun 18 10:56:58 UTC 2019 - ancor@suse.com

- Proposal: initial support for several separate LVM volume groups
  (part of jsc#SLE-7238).
- 4.2.20

-------------------------------------------------------------------
Mon Jun 10 11:54:40 UTC 2019 - José Iván López González <jlopez@suse.com>

- AutoYaST: add support for multi-device Btrfs filesystems.
- Part of jsc#SLE-3877.
- 4.2.19

-------------------------------------------------------------------
Fri May 31 12:40:29 UTC 2019 - Stasiek Michalski <hellcp@mailbox.org>

- Add metainfo (fate#319035)
- Revamp spec
- Replace GenericName with Comment
-4.2.18

-------------------------------------------------------------------
Fri May 17 14:59:50 UTC 2019 - ancor@suse.com

- AutoYaST: do not ask for a reusable filesystem when it's not
  really needed (bsc#1134330).
- 4.2.17

-------------------------------------------------------------------
Thu May 16 10:38:16 UTC 2019 - José Iván López González <jlopez@suse.com>

- Partitioner: allow to resize devices used by a multi-device
  Btrfs filesystem (part of jsc#SLE-3877).
- 4.2.16

-------------------------------------------------------------------
Mon May 13 14:08:14 UTC 2019 - Steffen Winterfeldt <snwint@suse.com>

- guided proposal frees space from existing multidevice btrfs properly
  (bsc#1096760); the same for raid using partitions
- 4.2.15

-------------------------------------------------------------------
Fri May 10 12:31:21 UTC 2019 - Ancor Gonzalez Sosa <ancor@suse.com>

- Partitioner: button to delete Btrfs filesystems.
- Partitioner: prevent edition of block devices that are part of
  a multi-device Btrfs.
- Part of jsc#SLE-3877.
- 4.2.14

-------------------------------------------------------------------
Wed May  8 11:59:39 UTC 2019 - José Iván López González <jlopez@suse.com>

- Partitioner: added option for creating Btrfs filesystems (single-
  and multidevice).
- Partitioner: added option for editing devices used by a Btrfs.
- Part of jsc#SLE-3877.
- 4.2.13

-------------------------------------------------------------------
Thu May  2 09:49:02 UTC 2019 - David Diaz <dgonzalez@suse.com>

- Partitioner: fix the Btrfs filesystem icon used in "Type" column.
- Partitioner: improve the value for the "Type" column when a volume
  group does not have name.
- Partitioner: fix the device name for a multidevice filesystem.
- Partitioner: do not show label nor mount point for devices used by
  a multidevice filesystem.
- Part of jsc#SLE-3877.
- 4.2.12

-------------------------------------------------------------------
Thu May  2 09:21:50 UTC 2019 - ancor@suse.com

- Partitioner: fixes in the navigation tree (bsc#1133686).
- 4.2.11

-------------------------------------------------------------------
Tue Apr 30 12:30:12 UTC 2019 - David Diaz <dgonzalez@suse.com>

- Partitioner: unify the "Type" and "FS Type" columns.
- Partitioner: show multidevice filesystems in the system section.
- Part of jsd#SLE-3877.
- 4.2.10

-------------------------------------------------------------------
Tue Apr 30 07:46:10 UTC 2019 - José Iván López González <jlopez@suse.com>

- Partitioner: added option for editing Btrfs filesystems.
- Part of jsd#SLE-3877.
- 4.2.9

-------------------------------------------------------------------
Wed Apr 24 13:42:09 UTC 2019 - José Iván López González <jlopez@suse.com>

- Partitioner: BTRFS section was adapted to show both: multidevice
  and non-multidevice BTRFS filesystems.
- Partitioner: added page for each BTRFS filesystem.
- Part of jsd#SLE-3877.
- 4.2.8

-------------------------------------------------------------------
Mon Apr 22 22:56:55 UTC 2019 - David Diaz <dgonzalez@suse.com>

- Partitioner: by default, initialize the tree with sections
  expanded and devices collapsed.
- Partitioner: improves the user experience preserving, between
  every redraw, the tree items as the were: expanded or collapsed.
- Lightly related to fate#318196.
- 4.2.7

-------------------------------------------------------------------
Mon Apr 15 15:46:04 UTC 2019 - ancor@suse.com

- Partitioner: fixed translation issues related to bcache
  (bsc#1126822).
- 4.2.6

-------------------------------------------------------------------
Wed Apr 10 11:04:44 UTC 2019 - José Iván López González <jlopez@suse.com>

- AutoYaST: new format for importing/exporting NFS drives.
- Related to bsc#1130256.
- 4.2.5

-------------------------------------------------------------------
Wed Apr 10 07:55:26 UTC 2019 - David Diaz <dgonzalez@suse.com>

- Partitioner: when editing a block device, clean-up useless
  LVM PV metadata from it (bsc#1129663)
- 4.2.4

-------------------------------------------------------------------
Wed Apr  3 08:09:10 UTC 2019 - José Iván López González <jlopez@suse.com>

- Fix NFS root detection when installing with AutoYaST
  (needed for bsc#1130256).
- 4.2.3

-------------------------------------------------------------------
Wed Apr  3 07:12:34 UTC 2019 - David Diaz <dgonzalez@suse.com>

- Fix initial proposal to make a clean copy of initial settings
  before switching to another candidate device (bsc#1130392).
- Related to bsc#1102026 and bsc#1090383.
- 4.2.2

-------------------------------------------------------------------
Tue Apr  2 15:37:22 UTC 2019 - José Iván López González <jlopez@suse.com>

- Add support for installing over NFS with AutoYaST (bsc#1130256).
- 4.2.1

-------------------------------------------------------------------
Tue Apr  2 13:55:19 UTC 2019 - ancor@suse.com

- Fixed unit tests to also work in ARM architecture (bsc#1130957).

-------------------------------------------------------------------
Wed Mar 27 10:07:31 UTC 2019 - José Iván López González <jlopez@suse.com>

- Do not add mount options that are default (bsc#1122867).
- Short partition ids.
- Move windows system detection to ExistingFilesystem class.
- 4.2.0

-------------------------------------------------------------------
Tue Mar 26 12:56:35 UTC 2019 - snwint@suse.com

- propose boot loader partitions only on system disk (bsc#1094927)

-------------------------------------------------------------------
Tue Mar 26 11:51:34 UTC 2019 - José Iván López González <jlopez@suse.com>

- Improve unit tests: mocking architecture for Bcache is not needed
  anymore (fix regression tests for bsc#1129787).
- 4.1.77

-------------------------------------------------------------------
Mon Mar 25 14:20:54 UTC 2019 - José Iván López González <jlopez@suse.com>

- Fix boot disk detection (bsc#1129787).
- 4.1.76

-------------------------------------------------------------------
Mon Mar 18 09:30:02 UTC 2019 - Imobach Gonzalez Sosa <igonzalezsosa@suse.com>

- Fix bcache and AutoYaST related tests (related to fate#325346).
- 4.1.75

-------------------------------------------------------------------
Wed Mar 13 17:18:19 UTC 2019 - José Iván López González <jlopez@suse.com>

- Show new icons for the options of the Configure menu button
  (related to bsc#1122174).
- 4.1.74

-------------------------------------------------------------------
Wed Mar 13 16:45:16 CET 2019 - schubi@suse.de

- Unifying name Bcache/bcache to bcache (fate#325346).
- 4.1.73

-------------------------------------------------------------------
Tue Mar 12 17:30:49 UTC 2019 - Imobach Gonzalez Sosa <igonzalezsosa@suse.com>

- Add support for Bcache to AutoYaST (fate#325346).
- Fix reuse of RAID partitions for LVM volume groups and bcache
  devices.
- 4.1.72

-------------------------------------------------------------------
Mon Mar 11 22:19:33 UTC 2019 - David Díaz <dgonzalez@suse.com>

- Only exports the partition_type attribute when it belongs to a
  partition table with support for extended partitions
  (bsc#1115751).

-------------------------------------------------------------------
Wed Mar  6 16:28:26 UTC 2019 - Stefan Hundhammer <shundhammer@suse.com>

- Prevent crash if resizing a newly formatted filesystem (bsc#1124146)
- 4.1.71

-------------------------------------------------------------------
Wed Mar  6 11:21:49 UTC 2019 - Ladislav Slezák <lslezak@suse.cz>

- Fixed "can't modify frozen String" crashes (related to
  bsc#1125006)
- Fixed missing translation (bsc#1127181)
- 4.1.70

-------------------------------------------------------------------
Mon Mar  4 16:31:25 UTC 2019 - David Díaz <dgonzalez@suse.com>

- Translates the filesystem roles properly (bsc#1127756).
- 4.1.69

-------------------------------------------------------------------
Thu Feb 28 15:33:19 UTC 2019 - David Díaz <dgonzalez@suse.com>

- Do not crash when using an old MD RAID schema and the
  partition_nr attribute is missing. Instead, do not allow to
  continue because a missing value issue (bsc#1126059).
- 4.1.68

-------------------------------------------------------------------
Wed Feb 27 09:57:10 UTC 2019 - David Díaz <dgonzalez@suse.com>

- Do not export the partition_type attribute when it belongs to a
  GPT partition table (bsc#1115751).

-------------------------------------------------------------------
Fri Feb 22 15:11:37 UTC 2019 - José Iván López González <jlopez@suse.com>

- Partitioner: improve "Import Mount Points" feature.
  Now, a fstab entry cannot be imported when the filesystem type
  is not supported. Moreover, the "mount by" type is assigned
  according to the fstab entry and the label of the previous
  filesystem is preserved (bsc#1103391).
- 4.1.67

-------------------------------------------------------------------
Wed Feb 20 16:39:13 UTC 2019 - Stefan Hundhammer <shundhammer@suse.com>

- Suggest /boot/efi as the mount point for EFI System Partitions
  (bsc#1088120)
- 4.1.66

-------------------------------------------------------------------
Wed Feb 20 11:55:30 UTC 2019 - jreidinger@suse.com

- filesystem label is kept when using existing partitioning
  (bsc#1087229)
- 4.1.65

-------------------------------------------------------------------
Wed Feb 20 09:35:48 UTC 2019 - José Iván López González <jlopez@suse.com>

- Partitioner: add new tab in Bcache section to show all caching
  set devices (part of fate#325346).
- 4.1.64

-------------------------------------------------------------------
Tue Feb 19 14:40:11 UTC 2019 - ancor@suse.com

- Partitioner: new option "Provide Crypt Passwords" (bsc#1113515).
- 4.1.63

-------------------------------------------------------------------
Tue Feb 19 14:15:16 UTC 2019 - jlopez@suse.com

- Partitioner: allow to edit bcache devices (part of fate#325346).
- 4.1.62

-------------------------------------------------------------------
Tue Feb 19 13:39:49 UTC 2019 - Stefan Hundhammer <shundhammer@suse.com>

- Added help texts for guided setup (bsc#1121801)
- 4.1.61

-------------------------------------------------------------------
Mon Feb 18 14:54:15 CET 2019 - aschnell@suse.com

- AutoYaST: handle device_order for MD RAIDs during installation
  (bsc#1083542)
- 4.1.60

-------------------------------------------------------------------
Thu Feb 14 17:03:05 UTC 2019 - Stefan Hundhammer <shundhammer@suse.com>

- Force mocking arch to x86_64 for unit tests that depend on bcache
  (part of jsc#SLE-4329)
- 4.1.59

-------------------------------------------------------------------
Thu Feb 14 12:49:25 UTC 2019 - Stefan Hundhammer <shundhammer@suse.com>

- Limit bcache support to x86_64 arch (jsc#SLE-4329)
- 4.1.58

-------------------------------------------------------------------
Thu Feb 14 12:19:58 UTC 2019 - Ancor Gonzalez Sosa <ancor@suse.com>

- Guided Setup: improved the disk selection user interface to
  properly support scenarios with many disks (bsc#1123688).
- 4.1.57

-------------------------------------------------------------------
Thu Feb 14 10:49:47 CET 2019 - aschnell@suse.com

- AutoYaST: save device_order for MD RAIDs (bsc#1083542)
- 4.1.56

-------------------------------------------------------------------
Fri Feb  8 11:43:53 UTC 2019 - ancor@suse.com

- AutoYaST: fix broken support for retaining existing MD RAIDs in
  some scenarios (bsc#1120979,  bsc#1121720).
- 4.1.55

-------------------------------------------------------------------
Thu Feb  7 15:53:28 UTC 2019 - jlopez@suse.com

- Partitioner: allow to create bcache devices without a caching
  set (part of fate#325346).
- 4.1.54

-------------------------------------------------------------------
Wed Feb  6 11:54:41 UTC 2019 - Ancor Gonzalez Sosa <ancor@suse.com>

- Partitioner: when running standalone (in an installed system)
  abort gracefully if probing fails (bsc#1123837).
- 4.1.53

-------------------------------------------------------------------
Mon Feb  4 15:55:56 UTC 2019 - jlopez@suse.com

- Remove setters for bcache attributes that cannot be permanent
  saved (writeback_percent and sequential_cutoff).
- Part of fate#325346.
- 4.1.52

-------------------------------------------------------------------
Mon Feb  4 15:54:13 UTC 2019 - Stefan Hundhammer <shundhammer@suse.com>

- Limit ESP to min size on aarch64 (bsc#1119318)
- 4.1.51

-------------------------------------------------------------------
Thu Jan 31 12:35:36 UTC 2019 - jlopez@suse.com

- Partitioner: properly show Flash-only Bcache devices.
- Part of fate#325346.
- 4.1.50

-------------------------------------------------------------------
Thu Jan 31 12:23:49 CET 2019 - aschnell@suse.com

- do not show hint for details button if button does not exist
  (bsc#1115807)
- 4.1.49

-------------------------------------------------------------------
Thu Jan 24 16:44:15 UTC 2019 - ancor@suse.com

- Partitioning proposal: improved the calculation about how much
  each Windows partition must be resized (bsc#1121286).
- 4.1.48

-------------------------------------------------------------------
Wed Jan 23 10:14:20 UTC 2019 - Ancor Gonzalez Sosa <ancor@suse.com>

- Make the storage proposal (i.e. the Guided Setup) easier to
  debug (bsc#1057436).
- 4.1.47

-------------------------------------------------------------------
Wed Jan 23 10:11:58 CET 2019 - aschnell@suse.com

- do not include nil in package list of used storage features
  for FC devices (bsc#1122781)
- 4.1.46

-------------------------------------------------------------------
Thu Jan 17 13:46:54 UTC 2019 - ancor@suse.com

- Specific error pop-up for exceptions raised while calculating the
  storage actions (mitigation of bsc#1120070).
- 4.1.45

-------------------------------------------------------------------
Thu Jan 10 14:59:32 UTC 2019 - jlopez@suse.com

- Allow to cancel Guided Setup (bsc#1121442).
- Link to storage client from installation summary (bsc#1099485).
- 4.1.44

-------------------------------------------------------------------
Tue Dec 18 12:43:21 CET 2018 - schubi@suse.de

- Do not touch eMMC boot partitions (mmcblk*boot*) (bsc#1119316)
- 4.1.43

-------------------------------------------------------------------
Tue Dec 18 12:02:57 CET 2018 - aschnell@suse.com

- do not use removed function IconPath anymore (bsc#1119699)
- 4.1.42

-------------------------------------------------------------------
Tue Dec 11 10:36:52 UTC 2018 - jlopez@suse.com

- Hardening execution of system commands (part of bsc#1118291).
- 4.1.41

-------------------------------------------------------------------
Wed Dec  5 17:01:14 UTC 2018 - Stasiek Michalski <hellcp@mailbox.org>

- Ship only primary icons with module to avoid conflicts (boo#1118521)
- 4.1.40

-------------------------------------------------------------------
Tue Dec  4 15:07:42 UTC 2018 - jlopez@suse.com

- Partitioner: does not allow to create BTRFS subvolumes with
  unsafe characters in its path (related to bsc#1059972).
- 4.1.39

-------------------------------------------------------------------
Fri Nov 30 14:35:44 UTC 2018 - ancor@suse.com

- Support for Raspberry Pi in Guided Proposal: it suggests to keep
  the firmware partition and mount it as /boot/vc (fate#323484).
- 4.1.38

-------------------------------------------------------------------
Tue Nov 27 05:34:41 UTC 2018 - Noah Davis <noahadvs@gmail.com>

- Provide icon with module (boo#1109310)
- 4.1.37

-------------------------------------------------------------------
Thu Nov 22 15:56:50 UTC 2018 - jlopez@suse.com

- Partitioner: add support for UDF filesystem (fate#326877).
- 4.1.36

-------------------------------------------------------------------
Fri Nov 16 16:08:38 UTC 2018 - Ancor Gonzalez Sosa <ancor@suse.com>

- The Guided Proposal tries to preserve partitions of type IRST
  (Intel Rapid Start Technology) when possible (bsc#1099187,
  fate#325885).
- Made the Guided Proposal algorithm more clear, so it's easier to
  debug (bsc#1057436).
- 4.1.35

-------------------------------------------------------------------
Fri Nov 16 14:59:05 UTC 2018 - jlopez@suse.com

- Initial proposal tries all possible attempts over each candidate
  device before switching to another device.
- Related to bsc#1102026 and bsc#1090383.
- 4.1.34

-------------------------------------------------------------------
Fri Nov 16 14:56:26 UTC 2018 - snwint@suse.com

- adjust boot requirements to handle RAID cases (fate#326573)
- 4.1.33

-------------------------------------------------------------------
Wed Nov 14 15:15:04 CET 2018 - schubi@suse.de

- SkipListValue.size_k returns the correct value (bsc#1115507).
- 4.1.32

-------------------------------------------------------------------
Thu Nov  8 16:44:24 UTC 2018 - ancor@suse.com

- Internal code reorganization at Proposal::SpaceMaker
  (preparations for fate#325885 and fate#323484).

-------------------------------------------------------------------
Wed Nov  7 12:28:40 UTC 2018 - jlopez@suse.com

- Crypttab entry allows to find a crypttab device by its UUID.
- Devicegraph#find_by_any_name is able to find a LUKS device by
  using its name at crypttab file.
- Related to bsc#1094963.
- 4.1.31

-------------------------------------------------------------------
Wed Nov  7 10:08:49 UTC 2018 - dgonzalez@suse.com

- Improve the proposal to be able to work with existing MD RAIDs
  (fate#326573).
- 4.1.30

-------------------------------------------------------------------
Wed Oct 31 13:34:48 UTC 2018 - Stefan Hundhammer <shundhammer@suse.com>

- Format the new multi-line compound actions correctly (bsc#1085134)
- 4.1.29

-------------------------------------------------------------------
Tue Oct 30 13:38:10 UTC 2018 - snwint@suse.com

- do not include 'Partition' in partition type names

-------------------------------------------------------------------
Fri Oct 26 11:37:48 UTC 2018 - snwint@suse.com

- allow creation of partitions starting before 1 MiB in expert
  partitioner

-------------------------------------------------------------------
Sat Oct 20 22:10:48 WEST 2018 - igonzalezsosa@suse.com

- Fixes and improvements to AutoYaST partitioning:
  - Improve support to reuse a disk as a PV (bsc#1107298).
  - Resize and then create new devices (bsc#1112545).
  - Warn the user when trying to reuse a non-existent filesystem.
  - Fix support of old format to specify several software RAIDs
    (bsc#1112546).
  - Proper support for Xen virtual partitions (bsc#1105350).
  - Export enable_snapshots element properly (related to
    bsc#1073544).
  - Allow to format a whole disk and use it as a filesystem.
  - Add support for partitioned software RAIDs (fate#326573).
  - Allow to use a whole disk as a software RAID member (related
    to fate#326573).
- 4.1.28

-------------------------------------------------------------------
Fri Oct 19 11:59:10 UTC 2018 - jreidinger@suse.com

- Add support for selecting cache mode during bcache creation
  (fate#325346)
- 4.1.27

-------------------------------------------------------------------
Thu Oct 18 14:04:59 UTC 2018 - ancor@suse.com

- Improved UI responsiveness by caching the value of some internal
  methods (bsc#1112402):
  * StorageClassWrapper.downcasted_new
  * StorageEnv#active?
  * DiskDevice#types_for_is
- Improved compatibility with RSpec 3.8 by caching the objects
  used to wrap libstorage-ng enum values.
- 4.1.26

-------------------------------------------------------------------
Tue Oct 16 12:58:10 UTC 2018 - jreidinger@suse.com

- Improve filtering of possible backing devices for bcache and
  limit deletion of bcache to only safe cases (fate#325346)
- 4.1.25

-------------------------------------------------------------------
Thu Oct 11 15:03:26 UTC 2018 - ancor@suse.com

- Improved the warning messages about missing BIOS Boot partition,
  both in the Partitioner and in AutoYaST (bsc#1087275).
- Improved other AutoYaST warning messages related to the
  partitions needed for booting.
- 4.1.24

-------------------------------------------------------------------
Fri Oct  5 09:43:38 UTC 2018 - jreidinger@suse.com

- Implement creating and deleting bcache devices (fate#325346)
- 4.1.23

-------------------------------------------------------------------
Tue Oct  2 13:44:40 UTC 2018 - schubi@suse.de

- Fixed flickering testcase. Maybe produced by the fix of
  bsc#1108831.
- 4.1.22

-------------------------------------------------------------------
Tue Oct  2 13:43:16 UTC 2018 - ancor@suse.com

- Partitioner: make it possible to directly format a disk (with
  no partitions).
- Partitioner: reorganized the user interface by grouping options
  to ensure all the new possibilities (like formatting a whole
  disk or creating partitions on an MD RAID) fit into text mode
  80x24 (part of fate#318196 and of fate#326573).
- 4.1.21

-------------------------------------------------------------------
Thu Sep 27 15:13:31 CEST 2018 - schubi@suse.de

- AutoYaST proposal: Do not crash if existing boot partition
  cannot be used without formatting it. (bsc#1108831)
- 4.1.20

-------------------------------------------------------------------
Fri Sep 20 13:19:58 UTC 2018 - jlopez@suse.com

- Partitioner: ask for unmounting when deleting a device.
- Partitioner: ask for unmounting when resizing a device.
- Part of fate#318196
- 4.1.19

-------------------------------------------------------------------
Tue Sep 20 13:00:29 UTC 2018 - jlopez@suse.com

- AutoYaST: Allow to use whole disk as PV by indicating a partition
  with number 0 (bsc#1107298).

-------------------------------------------------------------------
Wed Sep 19 21:23:54 UTC 2018 - lorenz@math.tu-berlin.de

- When trying to reuse a partition, AutoYaST will consider only
  those partitions from the right disk (bsc#1106774).

-------------------------------------------------------------------
Wed Sep 19 14:28:22 UTC 2018 - dgonzalez@suse.com

- Do not crash when a partition content info cannot be
  detected (bsc#1101979).
- 4.1.18

-------------------------------------------------------------------
Wed Sep 19 11:43:13 UTC 2018 - jreidinger@suse.com

- Add read-only support for Bcache (fate#325346)
- 4.1.17

-------------------------------------------------------------------
Wed Sep 19 11:25:25 UTC 2018 - ancor@suse.com

- Partitioner: allow to manage partitions in software MD RAIDs
  (fate#318196, bsc#1094933 and bsc#1092417).
- 4.1.16

-------------------------------------------------------------------
Fri Sep  7 15:24:41 UTC 2018 - ancor@suse.com

- Partitioner: do not offer partitions of other RAIDs as available
  devices to create MD RAID arrays (fate#318196).
- 4.1.15

-------------------------------------------------------------------
Wed Sep  5 14:41:15 UTC 2018 - ancor@suse.com

- Partitioner: allow to add full disks and multipath devices (with
  no partition table) to MD RAID arrays (fate#318196).
- Partitioner: improved checks and workflow for "Create New
  Partition Table"
- More informative message when a device is in use.
- 4.1.14

-------------------------------------------------------------------
Tue Sep  4 11:45:19 UTC 2018 - jreidinger@suse.com

- Add asterisk to mount points that is not active and also write it
  to description (FATE#318196)
- 4.1.13

-------------------------------------------------------------------
Thu Aug 30 07:41:35 UTC 2018 - jlopez@suse.com

- Improved wording when moving partitions (bsc#1099599).
- 4.1.12

-------------------------------------------------------------------
Wed Aug 29 14:30:59 UTC 2018 - jreidinger@suse.com

- Add support for Intel Rapid Start technology partitions
  (FATE#325885)
- 4.1.11

-------------------------------------------------------------------
Tue Aug 28 13:27:53 UTC 2018 - ancor@suse.com

- Fixed a wrong unit test.
- 4.1.10

-------------------------------------------------------------------
Fri Aug 24 12:43:32 UTC 2018 - mvidner@suse.com

- RAID attributes: include "Active: Yes/No" (bsc#1090010)

-------------------------------------------------------------------
Wed Aug 22 21:45:06 UTC 2018 - knut.anderssen@suse.com

- Partitioner: Hide the "what to do" selector for windows
  partitions if there are no windows partitions (bsc#1055646)
- 4.1.9

-------------------------------------------------------------------
Wed Aug 22 16:56:53 CEST 2018 - schubi@suse.de

- Switched license in spec file from SPDX2 to SPDX3 format.

-------------------------------------------------------------------
Wed Aug 22 13:01:37 CEST 2018 - schubi@suse.de

- Changed dir of COPYING file.

-------------------------------------------------------------------
Tue Aug 21 15:12:28 UTC 2018 - shundhammer@suse.com

- Fixed crash in the Kubic proposal when insufficient disk space
  (bsc#1099762)
- 4.1.8

-------------------------------------------------------------------
Fri Aug 17 08:47:53 UTC 2018 - ancor@suse.com

- AutoYaST: recognize Xen virtual partitions in the profile when
  importing and installing (bsc#1085134).
- 4.1.7

-------------------------------------------------------------------
Tue Aug 14 13:58:03 UTC 2018 - igonzalezsosa@suse.com

- AutoYaST: set the 'mount by' option when reusing partitions
  (bsc#1104774).
- 4.1.6

-------------------------------------------------------------------
Tue Aug 14 11:57:28 UTC 2018 - knut.anderssen@suse.com

- Partitioner: Permit going back when the partition dialog is
  skipped (bsc#1075443)
- 4.1.5

-------------------------------------------------------------------
Mon Aug 13 14:44:32 UTC 2018 - ancor@suse.com

- Partitioner: fixed some strings that contained mistakes about
  format and/or internationalization.

-------------------------------------------------------------------
Fri Aug 10 11:56:40 UTC 2018 - ancor@suse.com

- Fixed the warning about overwriting a manually edited partition
  layout. Now it works even after going back and forth in the
  installer steps (bsc#1055756).
- 4.1.4

-------------------------------------------------------------------
Thu Aug  9 15:43:17 UTC 2018 - ancor@suse.com

- Partitioner: display Xen virtual partitions and allow to format
  and mount them (bsc#1085134).

-------------------------------------------------------------------
Tue Jul 31 15:03:42 UTC 2018 - schubi@suse.de

- Warning if overwriting manually edited settings (bsc#1055756)
- 4.1.3

-------------------------------------------------------------------
Tue Jul 31 13:44:39 UTC 2018 - igonzalezsosa@suse.com

- AutoYaST: export volume group name (lvm_group) when a MD RAID
  device is used as a physical volume (bsc#1103113).
- 4.1.2

-------------------------------------------------------------------
Thu Jul 26 11:16:27 UTC 2018 - snwint@suse.com

- make bsc#1098594 regression test work on s390
- 4.1.1

-------------------------------------------------------------------
Wed Jul 25 21:41:48 CEST 2018 - aschnell@suse.com

- use "Partition Table" instead of "Disk Label" in expert
  partitioner (bsc#1070570)
- 4.1.0

-------------------------------------------------------------------
Mon Jul 23 13:55:03 UTC 2018 - snwint@suse.com

- document XEN guest setup for testing (bsc#1085134)
- 4.0.199

-------------------------------------------------------------------
Wed Jul 18 19:00:11 UTC 2018 - ancor@suse.com

- Partitioner: when creating a partition, use only regions of
  the selected type: primary, logical or extended (bsc#1097634).
- 4.0.198

-------------------------------------------------------------------
Wed Jul 18 11:38:39 UTC 2018 - ancor@suse.com

- AutoYaST: export BIOS RAID devices correctly (bsc#1098594).
- 4.0.197

-------------------------------------------------------------------
Mon Jul 16 16:26:28 UTC 2018 - ancor@suse.com

- AutoYaST: do not crash when reusing partitions on non-disk
  devices like DASD or BIOS RAID (bsc#1098594).
- 4.0.196

-------------------------------------------------------------------
Thu Jun 28 16:04:56 CEST 2018 - schubi@suse.de

- Added additional searchkeys to desktop file (fate#321043).
- 4.0.195

-------------------------------------------------------------------
Fri Jun 22 12:23:51 CEST 2018 - aschnell@suse.com

- mask systemd mount and swap units while expert partitioner is
  running (bsc#1073633)
- 4.0.194

-------------------------------------------------------------------
Tue Jun 19 15:25:36 UTC 2018 - jlopez@suse.com

- Partitioner: add checkbox to format system volumes when importing
  mount points (bsc#1078359 and bsc#1094924).
- 4.0.193

-------------------------------------------------------------------
Fri Jun 15 14:12:53 UTC 2018 - ancor@suse.com

- Partitioner: honor default subvolumes when importing the root
  mount point (related to bsc#1078359, bsc#1083851 and fate#318196)
- Partitioner: honor default snapshots configuration when importing
  the root mount point (bsc#966637)

-------------------------------------------------------------------
Thu Jun 14 12:25:37 UTC 2018 - lslezak@suse.cz

- Fixed crash in the error callback when the text contained
  non-ASCII characters in the translated message (bsc#1096758)
- 4.0.192

-------------------------------------------------------------------
Wed Jun 13 13:56:14 UTC 2018 - snwint@suse.com

- allow for numbers > 32 bit in region dialog (bsc#1065258)
- 4.0.191

-------------------------------------------------------------------
Tue Jun 12 16:18:40 UTC 2018 - igonzalezsosa@suse.com

- Fix 'Arbitrary Option Value' translation (bsc#1081605).
- 4.0.190

-------------------------------------------------------------------
Tue Jun 12 13:11:07 UTC 2018 - lslezak@suse.cz

- Use parallel_tests to speed up running the unit tests
  (bsc#1094875), active only in SLE15-SP1/Leap-15.1

-------------------------------------------------------------------
Tue Jun 12 08:40:48 UTC 2018 - ancor@suse.com

- Better auto-generated names for encryption devices:
  * Based on the udev id of the encrypted devices instead of its
    kernel name (bsc#760213).
  * Adapted when partition numbers change, if doable (bsc#1094157).
  * Prevent collision with other DeviceMapper names (bsc#1094157).
- Do not write LUKS password of the proposal into YaST logs.
- Do not crash when registering a zero-sized device into the logs.
- 4.0.189

-------------------------------------------------------------------
Mon Jun 11 13:26:54 UTC 2018 - igonzalezsosa@suse.com

- AutoYaST: fix handling of empty Btrfs subvolume prefixes
  (bsc#1096240).
- 4.0.188

-------------------------------------------------------------------
Thu Jun  7 16:13:18 UTC 2018 - jlopez@suse.com

- Added method to update encryption names according to a crypttab
  file (needed for bsc#1094963).
- 4.0.187

-------------------------------------------------------------------
Tue Jun  5 13:39:26 UTC 2018 - jlopez@suse.com

- Partitioner: fixed error when creating new BTRFS subvolumes in
  an installed system (bsc#1067510).
- 4.0.186

-------------------------------------------------------------------
Tue Jun  5 10:24:23 UTC 2018 - shundhammer@suse.com

- Partitioner: Handle limitations for volume labels (bsc#1084867)
- 4.0.185

-------------------------------------------------------------------
Mon Jun  4 15:13:54 UTC 2018 - jlopez@suse.com

- Partitioner: allow to move partitions (part of fate#318196).
- 4.0.184

-------------------------------------------------------------------
Thu May 17 13:49:57 UTC 2018 - ancor@suse.com

- Added to the installer a detailed description about the origin of
  the partitioning layout, as discussed in bsc#1089274.
- 4.0.183

-------------------------------------------------------------------
Thu May 17 13:32:37 UTC 2018 - jlopez@suse.com

- Allow to consider MD RAIDs as BIOS RAIDs by using the env
  variable LIBSTORAGE_MDPART (bsc#1092417).

-------------------------------------------------------------------
Thu May 17 08:53:17 UTC 2018 - jlopez@suse.com

- Fixed tests to avoid to require files provided by
  yast-installation package (needed for bsc#1091047).

-------------------------------------------------------------------
Wed May 16 14:10:01 UTC 2018 - jlopez@suse.com

- Fixed detection of candidate disks for installation
  (bsc#1091047).
- 4.0.182

-------------------------------------------------------------------
Wed May 16 13:12:11 UTC 2018 - snwint@suse.com

- don't reuse prep partitions larger than 8 MiB (bsc#1090019)
- 4.0.181

-------------------------------------------------------------------
Wed May 16 10:59:27 UTC 2018 - igonzalezsosa@suse.com

- Partitioner: fix several translation issues (bsc#1081837 and
  bsc#1081601).

-------------------------------------------------------------------
Mon May 14 16:43:05 UTC 2018 - ancor@suse.com

- Expose the active flag of the MountPoint class (needed for the
  definitive fix for bsc#1064437 in modern distributions).
- 4.0.180

-------------------------------------------------------------------
Fri May 11 14:05:49 UTC 2018 - igonzalezsosa@suse.com

- Partitioner: check whether required packages are installed
  before committing changes to disk (bsc#1089508).
- 4.0.179

-------------------------------------------------------------------
Fri May 11 10:31:10 UTC 2018 - jlopez@suse.com

- Partitioner: fix buttons to abort and to go back
  (part of fate#318196 and related to bsc#1075443).
- Partitioner: fixed detection of reprobed system to avoid
  unnecessary proposal re-calculation.

-------------------------------------------------------------------
Fri May 11 10:08:24 UTC 2018 - jlopez@suse.com

- Partitioner: allow to select only valid parity algorithms when
  creating a new MD RAID (bsc#1090182).

-------------------------------------------------------------------
Fri May 11 07:36:18 UTC 2018 - ancor@suse.com

- Partitioner: "Configure..." button allowing to execute the
  YaST clients for iSCI, FCoE, DASD, zFCP and XPRAM (bsc#1090753).

-------------------------------------------------------------------
Wed May  9 08:21:50 UTC 2018 - igonzalezsosa@suse.com

- AutoYaST: do not crash when size is set to 'auto' for a partition
  without a mount point (bsc#1092414).
- 4.0.178

-------------------------------------------------------------------
Tue May  8 15:34:19 UTC 2018 - shundhammer@suse.com

- Add note to YAML files for devices not supported in YAML
  (part of fate#318196)
- 4.0.177

-------------------------------------------------------------------
Mon May  7 16:39:49 UTC 2018 - shundhammer@suse.com

- Dump devicegraphs and actions in better strategic places
  (part of fate#318196)
- Make sure not to write LUKS passwords to YAML dump files
- 4.0.176

-------------------------------------------------------------------
Fri May 04 18:06:41 CEST 2018 - aschnell@suse.com

- provide function to disable MD auto assembly (bsc#1090690)
- provide function to inhibit udisks from doing mounts
- use these two functions when running expert partitioner
- 4.0.175

-------------------------------------------------------------------
Fri May  4 14:46:31 UTC 2018 - jlopez@suse.com

- Partitioner: added option to import mount points (part of
  fate#318196 and bsc#1083851).
- 4.0.174

-------------------------------------------------------------------
Fri May  4 10:46:31 UTC 2018 - igonzalezsosa@suse.com

- AutoYaST: handle <subvolumes_prefix/> and <subvolumes> empty
  values properly (bsc#1076337, bsc#1090095 and bsc#1091669).
- 4.0.173

-------------------------------------------------------------------
Thu May  3 15:46:27 UTC 2018 - ancor@suse.com

- Set fs_passno to 2 for ext2/3/4 filesystems assigned to non-root
  mount points (bsc#1078703).
- 4.0.172

-------------------------------------------------------------------
Thu May  3 15:12:09 UTC 2018 - shundhammer@suse.com

- Don't require rspec/mocks (not present in inst-sys)
  (part of fate#318196)
- 4.0.171

-------------------------------------------------------------------
Wed May  2 12:55:09 UTC 2018 - shundhammer@suse.com

- Dump devicegraph and actions to separate human readable files
  (part of fate#318196)
- 4.0.170

-------------------------------------------------------------------
Fri Apr 27 15:23:05 UTC 2018 - ancor@suse.com

- Partitioner: fixed checks when the root filesystem is NFS
  (bsc#1090752).
- 4.0.169

-------------------------------------------------------------------
Fri Apr 27 12:57:25 UTC 2018 - jreidinger@suse.com

- add method to check if system has any disk device (bsc#1090753)
- 4.0.168

-------------------------------------------------------------------
Fri Apr 27 11:15:20 UTC 2018 - ancor@suse.com

- Set fs_passno to 1 for ext2/3/4 root filesystems (bsc#1078703).
- 4.0.167

-------------------------------------------------------------------
Fri Apr 27 05:57:25 UTC 2018 - jreidinger@suse.com

- fix libstorage logging that do not expect printf expansion
  (bsc#1091062)
- 4.0.166

-------------------------------------------------------------------
Thu Apr 26 10:59:42 UTC 2018 - ancor@suse.com

- Ensure the installer adds reused devices to /etc/crypttab and/or
  /etc/mdadm.conf if needed for booting (bsc#1071350).
- 4.0.165

-------------------------------------------------------------------
Wed Apr 25 16:07:46 UTC 2018 - jlopez@suse.com

- Partitioner: fix bug after confirming changes in a running system
  (related to bsc#1086892).
- 4.0.164

-------------------------------------------------------------------
Tue Apr 24 09:15:14 UTC 2018 - jlopez@suse.com

- Partitioner: do not validate setup just after rescanning
  (related to bsc#1086892).
- 4.0.163

-------------------------------------------------------------------
Mon Apr 23 13:10:15 UTC 2018 - ancor@suse.com

- Partitioner: use the correct default value for 'Enable Snapshots'
  when the 'Operating System' role is chosen for a new device
  (bsc#1084491).
- 4.0.162

-------------------------------------------------------------------
Mon Apr 23 10:27:04 UTC 2018 - jlopez@suse.com

- Make the package to be architecture dependant to correctly check
  the current architecture (bsc#1081198).
- 4.0.161

-------------------------------------------------------------------
Fri Apr 20 20:27:15 UTC 2018 - igonzalezsosa@suse.com

- AutoYaST: properly handle empty proposals (bsc#1090390).
- 4.0.160

-------------------------------------------------------------------
Fri Apr 20 09:39:44 UTC 2018 - ancor@suse.com

- Implemented the use_available LVM strategy for the proposal
  (part of fate#318196).
- Make use_available the new default LVM strategy, so the system
  behavior is closer to the old yast-storage.
- Speed improvements in the use_needed LVM strategy.
- 4.0.159

-------------------------------------------------------------------
Fri Apr 20 08:49:29 UTC 2018 - jlopez@suse.com

- Partitioner: add missing warning and summary of changes when
  running in an installed system (part of fate#318196 and related
  to bsc#1086892).
- 4.0.158

-------------------------------------------------------------------
Thu Apr 19 13:52:34 UTC 2018 - igonzalezsosa@suse.com

- Fix some translations issues in the Expert Partitioner
  (bsc#1081571).

-------------------------------------------------------------------
Wed Apr 18 10:37:17 UTC 2018 - ancor@suse.com

- Updated libstorage-ng dependency to ensure slots on extended
  partitions are handled correctly and added regression unit test
  about it (bsc#1088483).
- Significant speed improvements in the proposal code.

-------------------------------------------------------------------
Tue Apr 17 12:01:08 UTC 2018 - shundhammer@suse.com

- Added missing help texts in the partitioner (bsc#1079591)
- 4.0.157

-------------------------------------------------------------------
Fri Apr 13 12:33:25 UTC 2018 - jlopez@suse.com

- Added support for settings 'expert_partitioner_warning' and
  'proposal_settings_editable' (bsc#1087486).
- Fix bug going back in Partitioner: only re-calculate proposal
  when the system was re-probed (bsc#1088960).
- 4.0.156

-------------------------------------------------------------------
Fri Apr 13 12:31:04 UTC 2018 - igonzalezsosa@suse.com

- AutoYaST: support partition_type when set to "primary"
 (bsc#1081506).
- 4.0.155

-------------------------------------------------------------------
Fri Apr 13 10:56:19 UTC 2018 - ancor@suse.com

- More informative message displayed when the proposal failed with
  some given settings, so it doesn't sound like a definitive error
  (related to bsc#1089274).
- 4.0.154

-------------------------------------------------------------------
Tue Apr 10 16:24:16 UTC 2018 - jlopez@suse.com

- Partitioner: fix creation of default BTRFS subvolume
  (bsc#1087918 and bsc#1087763).
- 4.0.153

-------------------------------------------------------------------
Tue Apr 10 16:21:04 UTC 2018 - ancor@suse.com

- Partitioner: make possible for the embedded yast2-nfs-client to
  access the vfstype field of fstab, so it can detect and correct
  legacy NFS entries (bsc#1088426).
- 4.0.152

-------------------------------------------------------------------
Tue Apr 10 10:59:32 UTC 2018 - jlopez@suse.com

- Update dependency with libstorage-ng (ensure lock system).
- Part of fate#318196.
- 4.0.151

-------------------------------------------------------------------
Mon Apr  9 19:44:44 UTC 2018 - ancor@suse.com

- Fixed the disable_order property of control.xml. Now it affects
  all the configurable aspects of the volume, as documented
  (related to bsc#1078495).
- 4.0.150

-------------------------------------------------------------------
Mon Apr  9 10:14:12 UTC 2018 - jlopez@suse.com

- Add system lock to avoid several processes using the storage
  stack when a process is already using it with read-write access.
- Part of fate#318196.
- 4.0.149

-------------------------------------------------------------------
Mon Apr  9 09:14:12 UTC 2018 - ancor@suse.com

- Force UTF-8 encoding for (most) strings coming from libstorage-ng
  (bsc#1088067).
- 4.0.148

-------------------------------------------------------------------
Thu Apr  5 15:30:57 UTC 2018 - shundhammer@suse.com

- Better error handling if no storage proposal is possible
  (bsc#1064677)
- 4.0.147

-------------------------------------------------------------------
Tue Apr  3 13:26:50 UTC 2018 - jlopez@suse.com

- Recover method #exists_in_probed? (bsc#1087818).
- 4.0.146

-------------------------------------------------------------------
Tue Apr  3 11:40:35 UTC 2018 - igonzalezsosa@suse.com

- Partitioner: do not crash when a striped logical volume is
  selected (bsc#1087702).

-------------------------------------------------------------------
Tue Apr  3 08:23:14 UTC 2018 - ancor@suse.com

- Fixed an error searching devices by name introduced by the recent
  sanitization related to bsc#1083672.
- 4.0.145

-------------------------------------------------------------------
Mon Apr  2 11:53:31 UTC 2018 - jlopez@suse.com

- Partitioner: add check for minimum size when using snapshots
  (bsc#1085131).
- 4.0.144

-------------------------------------------------------------------
Mon Apr  2 11:04:31 UTC 2018 - ancor@suse.com

- If a duplicate PV is found, show an specific error message with
  instructions (bsc#1082542).
- 4.0.143

-------------------------------------------------------------------
Mon Apr  2 09:53:31 UTC 2018 - jlopez@suse.com

- Use correct probe mode in unit tests (fate#318196).

-------------------------------------------------------------------
Mon Mar 26 14:54:45 UTC 2018 - ancor@suse.com

- Honor the LIBSTORAGE_MULTIPATH_AUTOSTART environment variable
  (part of fate#318196 and part of the fix for bsc#1082542).
- 4.0.142

-------------------------------------------------------------------
Mon Mar 26 12:43:53 UTC 2018 - jlopez@suse.com

- Sanitize devicegraph after probing when there are LVM volume
  groups with missing physical volumes (bsc#1083672).
- 4.0.141

-------------------------------------------------------------------
Mon Mar 26 09:41:25 UTC 2018 - shundhammer@suse.com

- Partitioner: Report detailed reasons why resizing is not possible
  (fate#318196)
- 4.0.140

-------------------------------------------------------------------
Mon Mar 26 09:02:11 UTC 2018 - ancor@suse.com

- Partitioner: fixed an error that was causing filesystems to be
  deleted in some combination of actions (part of fate#318196).

-------------------------------------------------------------------
Fri Mar 23 06:33:21 UTC 2018 - igonzalezsosa@suse.com

- AutoYaST: add support for LVM thin pools (bsc#1086596).
- AutoYaST: add support for stripes/stripesize elements.
- 4.0.139

-------------------------------------------------------------------
Mon Mar 19 07:47:13 UTC 2018 - jlopez@suse.com

- Fix issues with zero-size devices (bsc#1083887).
- Proposal: do not use zero-size devices.
- Partitioner: completely hide zero-size devices.
- 4.0.138

-------------------------------------------------------------------
Fri Mar 16 16:44:51 UTC 2018 - ancor@suse.com

- Added methods to deal with /etc/fstab specs (part of bsc#1071454)
- 4.0.137

-------------------------------------------------------------------
Fri Mar 16 10:06:25 UTC 2018 - igonzalezsosa@suse.com

- AutoYaST: fixed space distribution on LVM volume groups when
  using percentages (bsc#1079369).
- AutoYaST: do not ignore free spaces smaller than 30MiB
  (bsc#1085627).
- 4.0.136

-------------------------------------------------------------------
Thu Mar 15 16:29:56 UTC 2018 - jreidinger@suse.com

- Warn if user creates too big PReP partition which firmware can
  have problem to load (bsc#1081979)
- 4.0.135

-------------------------------------------------------------------
Thu Mar 15 15:37:51 UTC 2018 - shundhammer@suse.com

- Partitioner: Check if resize is possible based on filesystem type
  (fate#318196)
- 4.0.134

-------------------------------------------------------------------
Thu Mar 15 09:57:41 UTC 2018 - jlopez@suse.com

- Partitioner: do not allow to remove implicit partitions.
- Partitioner: allow to remove any disk device (not only disks).
- Part of fate#318196.
- 4.0.133

-------------------------------------------------------------------
Tue Mar 13 15:04:59 UTC 2018 - shundhammer@suse.com

- Post a warning if reusing an existing system mount point without
  formatting during installation in the partitioner (bsc#1080073)
- 4.0.132

-------------------------------------------------------------------
Mon Mar 12 11:35:55 UTC 2018 - igonzalezsosa@suse.com

- Add a new btrfs_read_only property to force the root filesystem
  to be read-only (bsc#1079000)
- Honor the subvolumes list for the root filesystem (bsc#1077866)
- 4.0.131

-------------------------------------------------------------------
Mon Mar 12 08:50:40 UTC 2018 - jlopez@suse.com

- Partitioner: always allow to edit the partition id (bsc#1077868).
- 4.0.130

-------------------------------------------------------------------
Fri Mar  9 09:36:27 UTC 2018 - ancor@suse.com

- Shadowed subvolumes that are ignored in the first proposal
  attempt are not longer omitted in subsequent ones (#bsc#1084213
  and bsc#1084261).
- 4.0.129

-------------------------------------------------------------------
Thu Mar  8 14:35:20 UTC 2018 - jlopez@suse.com

- Make proposal to work with implicit partition tables (s390).
- Part of fate#318196.
- 4.0.128

-------------------------------------------------------------------
Wed Mar  7 16:41:09 UTC 2018 - shundhammer@suse.com

- Make sure subvolumes use the same mount_by as their parent btrfs
  (bsc#1080408)
- 4.0.127

-------------------------------------------------------------------
Wed Mar  7 15:01:47 UTC 2018 - ancor@suse.com

- Better control on whether a separate /boot/zipl is needed in
  S/390 systems, both in the Guided Setup and the Partitioner.
- Do not longer report FBA DASDs to be unsupported devices for
  booting (they are indeed supported).
- Part of bsc#1070265.
- 4.0.126

-------------------------------------------------------------------
Wed Mar  7 11:39:52 UTC 2018 - snwint@suse.com

- fix translations in blk_device_resize.rb (bsc#1081598)
- 4.0.125

-------------------------------------------------------------------
Mon Mar  5 15:47:29 UTC 2018 - jlopez@suse.com

- Guided proposal uses preferred partition table type when
  possible (e.g., all partitions are deleted).
- Part of fate#318196.
- 4.0.124

-------------------------------------------------------------------
Mon Mar  5 15:18:00 UTC 2018 - jreidinger@suse.com

- Add specialized warning when /boot/efi is on software RAID
  (bsc#1081578)
- 4.0.123

-------------------------------------------------------------------
Mon Mar  5 12:42:49 UTC 2018 - igonzalezsosa@suse.com

- AutoYaST: do not stop installation when there is not enough
  space for automatically added boot devices (bsc#1082999).

-------------------------------------------------------------------
Fri Mar  2 13:52:37 UTC 2018 - igonzalezsosa@suse.com

- AutoYaST: support to export LVM volume group and MD RAIDs
  (bsc#1081331).

-------------------------------------------------------------------
Fri Mar  2 11:59:29 UTC 2018 - ancor@suse.com

- New PReP partitions proposed by the Guided Setup are now always
  primary (bsc#1082468).
- 4.0.122

-------------------------------------------------------------------
Fri Mar  2 10:28:49 UTC 2018 - snwint@suse.com

- ensure proper hierarchy when creating btrfs subvolumes (bsc#1078732)
- 4.0.121

-------------------------------------------------------------------
Thu Mar  1 15:20:35 UTC 2018 - shundhammer@suse.com

- Use default swap priority, not 42 (bsc#1066077)
- 4.0.120

-------------------------------------------------------------------
Thu Mar  1 14:48:34 UTC 2018 - jreidinger@suse.com

- Do not crash for separate /boot which does not exists yet
  (bsc#1078774
- 4.0.119

-------------------------------------------------------------------
Thu Mar  1 08:17:01 UTC 2018 - jlopez@suse.com

- Partitioner: allow to clone a disk (part of fate#318196).
- 4.0.118

-------------------------------------------------------------------
Wed Feb 28 15:39:15 UTC 2018 - ancor@suse.com

- More reliable parsing for the hwinfo output (bsc#1082536).
- Better documentation and tests for activate callbacks.
- 4.0.117

-------------------------------------------------------------------
Wed Feb 28 14:26:21 CET 2018 - aschnell@suse.com

- adapted to new activate callbacks in libstorage-ng (see
  bsc#1082542)
- 4.0.116

-------------------------------------------------------------------
Tue Feb 27 09:47:17 UTC 2018 - igonzalezsosa@suse.com

- Keep encryption when adding a device to a LVM volume group
  (bsc#1077750).
- 4.0.115

-------------------------------------------------------------------
Tue Feb 27 01:22:48 UTC 2018 - ancor@suse.com

- Improved handling of libstorage-ng errors (bsc#1070459,
  bsc#1079228, bsc#1079817, bsc#1063059, bsc#1080554, bsc#1076776,
  bsc#1070459 and some others).
- 4.0.114

-------------------------------------------------------------------
Mon Feb 26 16:11:12 UTC 2018 - shundhammer@suse.com

- Use format(), not Ruby variable expansion for translated messages
  (bsc#1081454)
- 4.0.113

-------------------------------------------------------------------
Mon Feb 26 14:54:59 UTC 2018 - ancor@suse.com

- Partitioner: ensure a valid password is provided when encrypting
  a device (bsc#1065079).
- Increase to 8 characters the minimum size to consider an
  encryption password to be valid (same limit than yast2-storage).
- 4.0.112

-------------------------------------------------------------------
Fri Feb 23 14:57:51 UTC 2018 - jreidinger@suse.com

- Do not allow to encrypt too small partition (bsc#1065071)
- Check size for separate /boot
- 4.0.111

-------------------------------------------------------------------
Fri Feb 23 14:50:46 UTC 2018 - jlopez@suse.com

- Partitioner: prevent to modify devices used in LVM or MD RAID
  (bsc#1079827).
- 4.0.110

-------------------------------------------------------------------
Fri Feb 23 14:11:10 UTC 2018 - ancor@suse.com

- Better handling of errors during hardware probing (bsc#1070459,
  bsc#1079228, bsc#1079817, bsc#1063059, bsc#1080554, bsc#1076776,
  bsc#1070459 and some others).
- 4.0.109

-------------------------------------------------------------------
Fri Feb 23 13:42:46 UTC 2018 - jlopez@suse.com

- Avoid to write files in tests (SCR.Write) (fate#323457).

-------------------------------------------------------------------
Thu Feb 22 19:28:22 CET 2018 - aschnell@suse.com

- adapted to callback improvements in libstorage-ng (bsc#1070459
  and many others)
- 4.0.108

-------------------------------------------------------------------
Thu Feb 22 17:12:46 UTC 2018 - shundhammer@suse.com

- Added missing textdomain calls (bsc#1081454)
- 4.0.107

-------------------------------------------------------------------
Thu Feb 22 16:59:52 UTC 2018 - igonzalezsosa@suse.com

- AutoYaST: fix support to create multiple volume groups
  (bsc#1081633).
- 4.0.106

-------------------------------------------------------------------
Thu Feb 22 12:51:48 UTC 2018 - shundhammer@suse.com

- Added missing ptable type conversion (fate#323457)
- 4.0.105

-------------------------------------------------------------------
Thu Feb 22 12:02:57 UTC 2018 - shundhammer@suse.com

- Changed default partition table from MSDOS to GPT (fate#323457)
- 4.0.104

-------------------------------------------------------------------
Thu Feb 22 11:41:45 UTC 2018 - snwint@suse.com

- ensure partition name changes during the proposal process are taken
  properly into account (bsc#1078691)
- 4.0.103

-------------------------------------------------------------------
Tue Feb 21 14:35:16 UTC 2018 - jlopez@suse.com

- Use sysconfig storage file to read the default value for mount_by
   (bsc#1081198).
- Partitioner: allow to configure default value for mount_by.
- 4.0.102

-------------------------------------------------------------------
Wed Feb 21 12:29:02 UTC 2018 - ancor@suse.com

- Do not take into account unformatted DASDs as a possible target
  for installation (bsc#1071798).
- Partitioner: do not show unformatted DASDs, since they cannot
  be partitioned or used in any other way.

-------------------------------------------------------------------
Wed Feb 21 08:46:02 UTC 2018 - igonzalezsosa@suse.com

- AutoYaST: guess which filesystem type should be used for a given
  partition/logical volume when it is not specified in the profile
  (bsc#1075203).

-------------------------------------------------------------------
Tue Feb 20 16:43:31 UTC 2018 - shundhammer@suse.com

- Special handling for mount options for / and /boot/*
  in the partitioner (bsc#1080731)
- 4.0.101

-------------------------------------------------------------------
Tue Feb 20 09:43:12 UTC 2018 - ancor@suse.com

- Partitioner: bring back traditional list of mount points for both
  installation and installed system (bsc#1076167 and bsc#1081200).
- Partitioner: bring back traditional behavior of the "Operating
  System" and "Data" roles during installation (bsc#1078975 and
  bsc#1073854).
- 4.0.100

-------------------------------------------------------------------
Mon Feb 19 18:08:01 UTC 2018 - shundhammer@suse.com

- Special handling for mount options for / and /boot/*
  (bsc#1080731, bsc#1061867, bsc#1077859)
- 4.0.99

-------------------------------------------------------------------
Mon Feb 19 14:19:30 UTC 2018 - jreidinger@suse.com

- Ensure that there is always selected item in table, if it is not
  empty (bsc#1076318)
- 4.0.98

-------------------------------------------------------------------
Thu Feb 15 16:16:19 UTC 2018 - ancor@suse.com

- Adjusted the suggested and minimum sizes of all the booting
  partitions, both in the storage proposal and in the Partitioner
  validations (bsc#1076851 and fate#318196).
- 4.0.97

-------------------------------------------------------------------
Thu Feb 15 13:01:41 UTC 2018 - igonzalezsosa@suse.com

- Fix hwinfo parsing to support more than one device_file property
  (bsc#1080999)
- 4.0.96

-------------------------------------------------------------------
Thu Feb 15 12:33:23 UTC 2018 - jreidinger@suse.com

- Split detection of problematic boot scenarios into errors and
  warnings. With warnings user can continue, but not with errors.
  (bsc#1074475)
- 4.0.95

-------------------------------------------------------------------
Wed Feb 14 09:39:42 UTC 2018 - jlopez@suse.com

- PowerPC: do not require /boot partition for non-PowerNV
  (bsc#1070139).
- Partitioner: do not enforce partition id for /boot/efi
  (bsc#1078707).
- 4.0.94

-------------------------------------------------------------------
Mon Feb 12 14:17:15 UTC 2018 - snwint@suse.com

- add format options dialog (bsc#1077868)
- 4.0.93

-------------------------------------------------------------------
Mon Feb 12 13:13:35 UTC 2018 - ancor@suse.com

- More reasonable location in the disk for the partitions proposed
  to make the system bootable (bsc#1073680 and bsc#1076851).

-------------------------------------------------------------------
Fri Feb  9 19:05:17 UTC 2018 - jlopez@suse.com

- Partitioner: fix issues using transactions (bsc#1079880 and
  bsc#1079573).
- 4.0.92

-------------------------------------------------------------------
Fri Feb  9 00:51:22 UTC 2018 - ancor@suse.com

- Enable multipathd in the target system at the end of installation
  if there are multipath devices (bsc#1076183).
- Updated required version of libstorage-ng-ruby (bsc#1079541).
- 4.0.91

-------------------------------------------------------------------
Thu Feb  8 16:48:20 UTC 2018 - jlopez@suse.com

- Add class MountPoint (needed for bsc#1076305 and bsc#1066763).
- 4.0.90

-------------------------------------------------------------------
Thu Feb  8 15:42:52 UTC 2018 - ancor@suse.com

- Partitioner: fixed creation of partition tables (bsc#1078721).
- 4.0.89

-------------------------------------------------------------------
Thu Feb  8 10:47:53 UTC 2018 - ancor@suse.com

- Partitioner: fixed 'Installation Summary' section (part of
  fate#318196).
- 4.0.88

-------------------------------------------------------------------
Thu Feb  8 10:15:18 UTC 2018 - igonzalezsosa@suse.com

- AutoYaST: support additional names in the drive/device element
  (bsc#1077277).
- 4.0.87

-------------------------------------------------------------------
Wed Feb  7 16:47:58 UTC 2018 - shundhammer@suse.com

- Disabled empty pages in partitioner for the time being
  (bsc#1078849)
- 4.0.86

-------------------------------------------------------------------
Wed Feb  7 10:57:26 UTC 2018 - igonzalezsosa@suse.com

- AutoYaST: support reuse of already existing partitions as LVM
  physical volumes or MD RAIDs (bsc#1077277).
- 4.0.85

-------------------------------------------------------------------
Wed Feb  7 00:18:34 UTC 2018 - ancor@suse.com

- Partitioner: fixed 'Device Graph' section (part of fate#318196).
- 4.0.84

-------------------------------------------------------------------
Mon Feb  5 15:26:35 UTC 2018 - ancor@suse.com

- Added a new 'disk' client, alias for 'partitioner' (bsc#1078900).
- 4.0.83

-------------------------------------------------------------------
Wed Jan 31 16:06:25 UTC 2018 - shundhammer@suse.com

- Handle arbitrary mount options for /etc/fstab properly
  (bsc#1066076)
- 4.0.82

-------------------------------------------------------------------
Wed Jan 31 14:53:57 UTC 2018 - jlopez@suse.com

- Partitioner: list all LVM thin volumes to delete when an LVM thin
  pool is going to be deleted.
- Partitioner: show warning when an LVM thin pool is overcommitted
  after resizing.
- Part of fate#318196.
- 4.0.81

-------------------------------------------------------------------
Wed Jan 31 11:53:57 UTC 2018 - igonzalezsosa@suse.com

- AutoYaST: try to shrink new partitions/logical volumes
  proportionally when there is not enough space (bsc#1078418).
- 4.0.80

-------------------------------------------------------------------
Wed Jan 31 09:25:07 UTC 2018 - ancor@suse.com

- Partitioner: initial support for NFS (part of fate#318196)
- Partitioner: removed useless tmpfs option
- 4.0.79

-------------------------------------------------------------------
Tue Jan 30 12:00:27 UTC 2018 - jlopez@suse.com

- Partitioner: allow to create LVM thin pools and volumes.
- Fix transactions of devicegraphs.
- Part of fate#318196.
- 4.0.78

-------------------------------------------------------------------
Tue Jan 30 11:24:28 UTC 2018 - jlopez@suse.com

- Partitioner: improve error message when trying to remove an used
  physical volume.

-------------------------------------------------------------------
Thu Jan 25 16:00:29 UTC 2018 - shundhammer@suse.com

- Add default mount options for /etc/fstab for ext2/3/4 and vfat
  (bsc#1066076)
- 4.0.77

-------------------------------------------------------------------
Wed Jan 24 12:28:19 UTC 2018 - igonzalezsosa@suse.com

- Properly detect snapshots subvolumes (bsc#1076321 and
  bsc#1076335).
- 4.0.76

-------------------------------------------------------------------
Tue Jan 23 13:44:43 UTC 2018 - jlopez@suse.com

- Partitioner: allow to resize LVM volume groups.
- Part of fate#318196.
- 4.0.75

-------------------------------------------------------------------
Tue Jan 23 13:01:39 UTC 2018 - ancor@suse.com

- Partitioner: consider all sizes entered by the user as base of 2
  despite the units not being consistent with the International
  System. Thus, 1KB (which in the IS actually means 1000 bytes)
  becomes equivalent to 1KiB (which is 1024 bytes).

-------------------------------------------------------------------
Tue Jan 23 10:09:51 UTC 2018 - snwint@suse.com

- fix proposal dialog error when there are no disks (bsc#1057430)

-------------------------------------------------------------------
Mon Jan 22 19:33:46 UTC 2018 - jlopez@suse.com

- Avoid partitioning checks error when using old settings format.
- Needed for bsc#1059160, bsc#1055747 and bsc#1063957.

-------------------------------------------------------------------
Mon Jan 22 15:55:46 UTC 2018 - ancor@suse.com

- Partitioner: button to resize LVM logical volumes now works as
  expected (part of fate#31896).
- 4.0.74

-------------------------------------------------------------------
Mon Jan 22 13:11:32 UTC 2018 - igonzalezsosa@suse.com

- Consider all free spaces when deciding which partitions
  distribution is better (bsc#1077051).

-------------------------------------------------------------------
Thu Jan 19 12:10:29 UTC 2018 - jlopez@suse.com

- Fix TODOs labels in partitioner (bsc#1058652).
- 4.0.73

-------------------------------------------------------------------
Fri Jan 19 11:31:14 UTC 2018 - jreidinger@suse.com

- Fix subtracting arrays of devices (fixes multipath wires
  detection for bsc#1076766)
- 4.0.72

-------------------------------------------------------------------
Fri Jan 19 09:50:54 UTC 2018 - ancor@suse.com

- Partitioner: when creating partitions they are now aligned to
  hardware requirements (indispensable for DASD) and when possible
  also for optimal performance (bsc#1069860 and bsc#1072011).
- Partitioner: adjusted alignment logic during resizing to match
  the new logic used during creation.
- Partitioner: skip validation of disabled widgets in the dialog
  to select the size of a new partition.
- Partitioner: fixed a crash and one inconsistency in the dialog
  to resize an existing partition.
- 4.0.71

-------------------------------------------------------------------
Fri Jan 19 09:41:52 UTC 2018 - ancor@suse.com

- Correctly open the expert partitioner when called from the
  Kubic/CaaSP summary screen (bsc#1076732)
- 4.0.70

-------------------------------------------------------------------
Mon Jan 15 14:22:32 UTC 2018 - jlopez@suse.com

- Added sanity checks for partitioning setup.
- Partitioner: setup issues are shown to the user before continue.
  Mandatory product volumes are required according to control file.
- Part of fate#31896 and fix for bsc#1059160, bsc#1055747 and
  bsc#1063957.
- 4.0.69

-------------------------------------------------------------------
Mon Jan 15 12:51:01 UTC 2018 - ancor@suse.com

- Some code reorganization regarding alignment and resizing.
- Added to several places in the API the possibilty of using other
  alignment types, in addition to the optimal one.
- Added a (temporary) workaround to a possible bug in libstorage-ng
  regarding alignment.

-------------------------------------------------------------------
Tue Jan  9 15:36:15 UTC 2018 - lslezak@suse.cz

- Added Mountable#persistent? (needed for bsc#1073696)
- 4.0.68

-------------------------------------------------------------------
Mon Jan  8 22:16:30 UTC 2018 - ancor@suse.com

- Added Devicegraph#find_by_any_name (needed for bsc#1073254)
- 4.0.67

-------------------------------------------------------------------
Mon Jan  8 12:46:38 UTC 2018 - ancor@suse.com

- Do not try to reuse UUID and label from unformatted swap
  partitions (bsc#1071515).
- 4.0.66

-------------------------------------------------------------------
Mon Jan  8 11:52:30 UTC 2018 - igonzalezsosa@suse.com

- Force the subvolume name to be relative (related to bsc#1073548)
- 4.0.65

-------------------------------------------------------------------
Mon Jan  8 11:37:06 UTC 2018 - ancor@suse.com

- Fixed error when calculating the proposal on top of a BIOS RAID
  (bsc#1067349)

-------------------------------------------------------------------
Fri Dec 22 15:40:13 UTC 2017 - igonzalezsosa@suse.com

- AutoYaST: export the enable_snapshots element (bsc#1073544)

-------------------------------------------------------------------
Fri Dec 22 15:17:35 UTC 2017 - snwint@suse.com

- rewrite SpaceMaker::resize_and_delete! to be more human-readable
- 4.0.64

-------------------------------------------------------------------
Fri Dec 22 14:40:04 UTC 2017 - snwint@suse.com

- fix unnecessary Windows partition deletion (bsc #1066386)
- 4.0.63

-------------------------------------------------------------------
Fri Dec 22 12:35:29 UTC 2017 - snwint@suse.com

- fix logic in GuidedProposal::calculate_proposal (bsc#1058027)
- 4.0.62

-------------------------------------------------------------------
Fri Dec 22 10:26:05 UTC 2017 - igonzalezsosa@suse.com

- Do not crash when showing an unhandled partition id
  (bsc#1068087)

-------------------------------------------------------------------
Wed Dec 20 15:33:49 UTC 2017 - ancor@suse.com

- Partitioner: support for deleting an LVM volume group.
- Correct handling of orphan physical volume devices.
- Fix for bsc#106956 and part of fate#31896.
- 4.0.61

-------------------------------------------------------------------
Wed Dec 20 12:04:42 CET 2017 - aschnell@suse.com

- added obsoletes (bsc#1073645)
- 4.0.60

-------------------------------------------------------------------
Tue Dec 19 17:12:27 UTC 2017 - ancor@suse.com

- Added BlkDevice.find_by_any_name (needed for bsc#1073254)
- 4.0.59

-------------------------------------------------------------------
Tue Dec 19 14:05:33 UTC 2017 - jreidinger@suse.com

- Add DeviceGraph#find_by_name call (needed for bsc#1072908)
- 4.0.58

-------------------------------------------------------------------
Mon Dec 18 12:59:02 UTC 2017 - igonzalezsosa@suse.com

- AutoYaST: Improve disklabel element handling (bsc#1073307).
- 4.0.57

-------------------------------------------------------------------
Thu Dec 14 12:01:48 UTC 2017 - ancor@suse.com

- Fixed a recently added unit test to not rely on libstorage-ng
  sorting. Related to bsc#1049901 and part of fate#31896.
- 4.0.56

-------------------------------------------------------------------
Mon Dec 11 15:40:36 UTC 2017 - jlopez@suse.com

- Partitioner: add buttons to Hard Disks section for creating new
  partitions and editing devices.
- Part of fate#318196.
- 4.0.55

-------------------------------------------------------------------
Mon Dec 11 15:32:28 UTC 2017 - ancor@suse.com

- Improved how the proposal handles disks that are in use but don't
  have a partition table (directly formatted disks, disks that are
  direct members of an LVM or RAID, etc.).
  Preliminary fix for bsc#1071949 and bsc#1067670.
- 4.0.54

-------------------------------------------------------------------
Mon Dec 11 12:56:35 UTC 2017 - jlopez@suse.com

- Improve detection of efi and swap partitions.
- bsc#1071775 and bsc#1065234
- 4.0.53

-------------------------------------------------------------------
Fri Dec  8 17:34:17 CET 2017 - locilka@suse.com

- Fixed dependencies (yast2 >= 4.0.24) (fate#318196)
- 4.0.52

-------------------------------------------------------------------
Tue Dec  5 14:32:26 UTC 2017 - igonzalezsosa@suse.com

- AutoYaST: assign the correct partition_id to /boot/efi
  (bsc#1071167)
- 4.0.51

-------------------------------------------------------------------
Tue Dec  5 06:46:00 UTC 2017 - ancor@suse.com

- Don't trust any longer the order of any collection coming from
  libstorage-ng (related to bsc#1049901 and part of fate#31896).
- 4.0.50

-------------------------------------------------------------------
Mon Dec  4 09:02:09 UTC 2017 - jlopez@suse.com

- Partitoner: added support for resizing partitions (bsc#1057586).
- Part of fate#318196.
- 4.0.49

-------------------------------------------------------------------
Mon Dec  4 08:55:17 UTC 2017 - igonzalezsosa@suse.com

- AutoYaST does not ignore the 'enable_snapshots' setting even
  if the list of partitions is missing (bsc#1070790).
- 4.0.48

-------------------------------------------------------------------
Fri Dec  1 16:58:14 UTC 2017 - ancor@suse.com

- Rely on the new improved mechanism of libstorage-ng to sort
  devices by name. Preparation for bsc#1049901 and part of
  fate#31896.
- 4.0.47

-------------------------------------------------------------------
Fri Dec  1 15:34:11 UTC 2017 - igonzalezsosa@suse.com

- Fix boot partition detection (bsc#1070621).
- 4.0.46

-------------------------------------------------------------------
Fri Dec  1 12:27:34 UTC 2017 - igonzalezsosa@suse.com

- AutoYaST honors 'use' and 'initialize' elements even if the
  list of partitions is missing (related to bsc#1065061).
- 4.0.45

-------------------------------------------------------------------
Thu Nov 30 16:14:49 UTC 2017 - ancor@suse.com

- Partitioner: added buttons to sort the devices being added to
  an MD RAID (part of fate#318196).
- 4.0.44

-------------------------------------------------------------------
Thu Nov 30 16:13:18 UTC 2017 - igonzalezsosa@suse.com

- Do not ignore start_multipath setting (bsc#1070343).
- 4.0.43

-------------------------------------------------------------------
Wed Nov 29 13:54:41 UTC 2017 - snwint@suse.com

- adjust list of partition ids in expert partitioner (bsc#1060993,
  fate#314888)
- 4.0.42

-------------------------------------------------------------------
Tue Nov 28 13:35:34 UTC 2017 - igonzalezsosa@suse.com

- AutoYaST: honor size=max for logical volumes (bsc#1070131).
- 4.0.41

-------------------------------------------------------------------
Mon Nov 27 17:49:38 UTC 2017 - jlopez@suse.com

- Allow to work with BIOS RAIDs as regular disks (bsc#1067349).
- Allow to create partition table over directly formatted devices.
- 4.0.40

-------------------------------------------------------------------
Mon Nov 27 17:08:52 UTC 2017 - snwint@suse.com

- make PartitionTables::partition_id_supported? available
- 4.0.39

-------------------------------------------------------------------
Fri Nov 24 13:25:34 UTC 2017 - ancor@suse.com

- Fixed a problem when confirming the very same partitioning schema
  several times (bug#1069671).
- 4.0.38

-------------------------------------------------------------------
Fri Nov 24 12:23:03 UTC 2017 - igonzalezsosa@suse.com

- AutoYaST: safer handling of partition ids (bsc#1067207).
- 4.0.37

-------------------------------------------------------------------
Thu Nov 23 15:27:23 UTC 2017 - igonzalezsosa@suse.com

- AutoYaST: add support to resize partitions and logical volumes
  (bsc#1069505).
- AutoYaST: fix detection of root partition when using LVM
  (bsc#1069647).
- 4.0.36

-------------------------------------------------------------------
Thu Nov 23 13:05:31 UTC 2017 - ancor@suse.com

- Ensure that disks considered for (auto)installation are always
  sorted in a stable and consistent way based on its device name.
  Preparation for bsc#1049901 and part of fate#31896.
- 4.0.35

-------------------------------------------------------------------
Wed Nov 22 19:19:27 UTC 2017 - jlopez@suse.com

- Partitioner: added support for resizing MD RAIDs.
- Part of fate#318196.
- 4.0.34

-------------------------------------------------------------------
Wed Nov 22 17:11:41 UTC 2017 - shundhammer@suse.com

- No RAID chunk size below 64 kiB for most types of RAID
  (bsc#1065381)
- 4.0.33

-------------------------------------------------------------------
Mon Nov 20 15:40:58 UTC 2017 - shundhammer@suse.com

- Added "Create New Partition Table" in partitioner
- Part of fate#318196.
- 4.0.32

-------------------------------------------------------------------
Thu Nov 16 10:31:04 UTC 2017 - jlopez@suse.com

- Improve logging: add wrapper param for guard method and dump xml
  representation of the devicegraph to the logs.
- Part of fate#318196.
- 4.0.31

-------------------------------------------------------------------
Wed Nov 15 15:55:51 UTC 2017 - ancor@suse.com

- When proposing a partitions layout for installation, prefer
  getting big installations and arranging the partitions by their
  weights over creating adjacent partitions. Part of fate#318196.
- 4.0.30

-------------------------------------------------------------------
Tue Nov 14 15:41:21 UTC 2017 - jlopez@suse.com

- Partitioner: added support for creating volume groups.
- Part of fate#318196.
- 4.0.29

-------------------------------------------------------------------
Wed Nov  8 16:03:31 UTC 2017 - snwint@suse.com

- safer handling of partition ids (bsc#1060993
- 4.0.28

-------------------------------------------------------------------
Wed Nov  8 14:45:22 UTC 2017 - igonzalezsosa@suse.com

- AutoYaST: filter out old '@' entries when importing the list of
  subvolumes (bsc#1061253)
- 4.0.27

-------------------------------------------------------------------
Wed Nov  8 10:07:09 UTC 2017 - ancor@suse.com

- Added support in the UI of the guided setup for the new format
  of <volumes> in the control file.
- Part of fate#318196.
- 4.0.26

-------------------------------------------------------------------
Wed Nov  8 05:54:04 UTC 2017 - igonzalezsosa@suse.com

- AutoYaST: fix space distribution when partition table does not
  exist (bsc#1065061)
- AutoYaST: set partition tables type according to the profile
- 4.0.25

-------------------------------------------------------------------
Tue Nov  7 13:48:43 UTC 2017 - jlopez@suse.com

- Fix name of planned logical volumes.
- Take into account real RAM size to plan volumes.
- Add scenario tests using new partitioning settings.
- Part of fate#318196.
- 4.0.24

-------------------------------------------------------------------
Tue Nov  7 13:18:35 UTC 2017 - igonzalezsosa@suse.com

- AutoYaST: adjust the list of allowed keys in skip lists
  (bsc#1065668)
- 4.0.23

-------------------------------------------------------------------
Tue Nov  7 09:38:19 UTC 2017 - igonzalezsosa@suse.com

- AutoYaST: add support for udev links in the <device/> element
  (bsc#1066320)
- 4.0.22

-------------------------------------------------------------------
Fri Nov  3 15:11:42 UTC 2017 - igonzalezsosa@suse.com

- AutoYaST: do not remove partitions that are supposed to be reused
  (bsc#1066398).
- 4.0.21

-------------------------------------------------------------------
Fri Nov  3 15:04:24 UTC 2017 - jlopez@suse.com

- Partitioner: support for deleting md raids.
- Part of fate#318196.
- 4.0.20

-------------------------------------------------------------------
Fri Nov 03 14:27:02 CET 2017 - aschnell@suse.com

- do not query end of region if region is empty (bsc#1066290)
- 4.0.19

-------------------------------------------------------------------
Thu Nov  2 17:58:28 UTC 2017 - igonzalezsosa@suse.com

- AutoYaST: query hardware information on skip lists (bsc#1065668).
- AutoYaST: support multi-valued keys on skip lists.
- AutoYaST: do not crash when no suitable disk for installation
  is found.
- 4.0.18

-------------------------------------------------------------------
Wed Nov  1 09:11:23 UTC 2017 - jlopez@suse.com

- Partitioner: support for deleting logical volumes.
- Part of fate#318196.
- 4.0.17

-------------------------------------------------------------------
Wed Nov  1 08:23:17 UTC 2017 - igonzalezsosa@suse.com

- AutoYaST: do not crash when an unknown key is used in a
  skip list (bsc#1065670).
- 4.0.16

-------------------------------------------------------------------
Tue Oct 31 12:14:18 UTC 2017 - igonzalezsosa@suse.com

- AutoYaST: fix reuse of partitions (bsc#1060637).
- AutoYaST: improve error handling when trying to reuse a partition
  fails.
- AutoYaST: when a problem is detected while creating a proposal,
  register in which section it was found.
- AutoYaST: register an issue when a proposal does not contain
  a root (/) partition.
- 4.0.15

-------------------------------------------------------------------
Mon Oct 30 13:32:02 UTC 2017 - ancor@suse.com

- Added an option in the installer to run the expert partitioner
  with the current storage layout as starting point.
- Possible fix for bsc#1055644 and part of fate#318196.
- 4.0.14

-------------------------------------------------------------------
Fri Oct 27 11:33:55 UTC 2017 - jsrain@suse.cz

- Limit maximal proposed size of EFI partition (bsc#1062775)
- 4.0.13

-------------------------------------------------------------------
Thu Oct 26 15:30:53 UTC 2017 - ancor@suse.com

- Partitioner: small adjustments in the verifications performed
  before running some wizards.

-------------------------------------------------------------------
Wed Oct 25 17:28:48 UTC 2017 - jlopez@suse.com

- Partitioner: allow to work with multipath devices.
- bsc#1058373 and bsc#1028853.
- Part of fate#318196.
- 4.0.12

-------------------------------------------------------------------
Wed Oct 25 13:12:37 UTC 2017 - igonzalezsosa@suse.com

- Add support to clone subvolumes when using AutoYaST (bsc#1064875)
- 4.0.11

-------------------------------------------------------------------
Wed Oct 25 12:32:58 CEST 2017 - snwint@suse.de

- adjust control.xml documentation
- 4.0.10

-------------------------------------------------------------------
Mon Oct 23 17:53:27 UTC 2017 - jlopez@suse.com

- Partitioner: show only option to create vg when there are no vgs.
- Part of fate#318196.
- 4.0.9

-------------------------------------------------------------------
Mon Oct 23 17:14:01 CEST 2017 - snwint@suse.de

- have volumes in control.xml proposed by default (fate#318196)
- 4.0.8

-------------------------------------------------------------------
Fri Oct 20 17:28:16 UTC 2017 - jlopez@suse.com

- Partitioner: support for creating logical volumes.
- Part of fate#318196.
- 4.0.7

-------------------------------------------------------------------
Thu Oct 19 14:27:49 UTC 2017 - igonzalezsosa@suse.com

- AutoYaST: add basic support for error handling
- AutoYaST: handle 'size: auto' correctly
- 4.0.6

-------------------------------------------------------------------
Thu Oct 19 13:05:35 UTC 2017 - jsrain@suse.cz

- During installation, mount efivarfs in /mnt/sys/firmware/efivars
  if present in inst-sys (bsc#1063063)
- 4.0.5

-------------------------------------------------------------------
Tue Oct 17 16:45:21 CEST 2017 - shundhammer@suse.de

- Terminate extra space distribution loop if nothing could be
  distributed anymore (bsc#1063392)
- 4.0.4

-------------------------------------------------------------------
Tue Oct 17 11:25:03 UTC 2017 - snwint@suse.com

- finalize control.xml description (fate#318196)
- 4.0.3

-------------------------------------------------------------------
Mon Oct 16 10:02:24 UTC 2017 - jlopez@suse.com

- Add strategies to try an initial valid proposal, even changing
  settings when necessary.
- Part of fate#318196.
- 4.0.2

-------------------------------------------------------------------
Tue Oct 10 11:11:59 UTC 2017 - jlopez@suse.com

- Adapt proposal to work with new format of proposal settings.
- Part of fate#318196.
- 4.0.1

-------------------------------------------------------------------
Mon Oct  9 12:29:13 UTC 2017 - igonzalezsosa@suse.com

- AutoYaST: proper handling of the 'use' element allowing to
  delete a set of partitions (bsc#1061042)
- AutoYaST: support for mkfs_options, fstopt and mount_by elements
  (bsc#1061289)
- 4.0.0

-------------------------------------------------------------------
Fri Oct  6 07:11:35 UTC 2017 - jlopez@suse.com

- Added support for reading new format of proposal settings.
- Part of fate#318196.
- 3.3.27

-------------------------------------------------------------------
Thu Oct  5 14:38:22 UTC 2017 - ancor@suse.com

- Partitioner: don't return to the summary screen after each
  operation.
- Partitioner: speedup the refresh time after each operation (by
  not querying the hostname again).
- Both part of fate#318196.
- 3.3.26

-------------------------------------------------------------------
Wed Oct  4 17:28:24 CEST 2017 - shundhammer@suse.de

- Added disk.desktop file for partitioner (bsc#1059528)
- 3.3.25

-------------------------------------------------------------------
Wed Oct  4 12:11:11 UTC 2017 - snwint@suse.com

- separate planning strategies from DevicesPlanner into
  DevicesPlannerStrategies module
- 3.3.24

-------------------------------------------------------------------
Tue Oct  3 07:06:32 UTC 2017 - ancor@suse.com

- Partitioner: buttons to edit the filesystem in RAID and LVM LV.
- Partitioner: correct positioning of some buttons.
- Partitioner: allow to mount several swap devices.
- All part of fate#318196.
- 3.3.23

-------------------------------------------------------------------
Fri Sep 29 15:06:42 UTC 2017 - ancor@suse.com

- Partitioner: option to create an MD RAID (part of fate#318196).
- 3.3.22

-------------------------------------------------------------------
Fri Sep 29 10:54:54 UTC 2017 - jlopez@suse.com

- Fix validation when trying to create a partition with custom
  size (bsc#1060864).
- 3.3.21

-------------------------------------------------------------------
Tue Sep 26 16:47:44 CEST 2017 - shundhammer@suse.de

- Implemented simple proposal for CASP (bsc#1058736)
- 3.3.20

-------------------------------------------------------------------
Mon Sep 25 10:44:42 CEST 2017 - snwint@suse.de

- updated installer hacks document: ssh key import works

-------------------------------------------------------------------
Fri Sep 22 15:20:51 UTC 2017 - jlopez@suse.com

- Avoid to reuse small efi partitions (bsc#1056640).
- 3.3.19

-------------------------------------------------------------------
Thu Sep 21 14:54:28 UTC 2017 - ancor@suse.com

- More backwards-compatible behavior when formatting partitions in
  the expert partitioner.
- Checkbox to enable snapshots for "/" in the expert partitioner.
- Both part of fate#318196
- 3.3.18

-------------------------------------------------------------------
Tue Sep 19 07:26:06 UTC 2017 - ancor@suse.com

- Improved creation and modification of partitions in the Expert
  Partitioner (bsc#1057869, bsc#1057874).
- Added button to define the Btrfs subvolumes directly during
  creation or modification.
- 3.3.17

-------------------------------------------------------------------
Wed Sep 13 14:44:52 UTC 2017 - jreidinger@suse.com

- add all full udev links and helper to list them all
  (useful for fixing bsc#1057604)
- 3.3.16

-------------------------------------------------------------------
Wed Sep 13 14:03:00 UTC 2017 - snwint@suse.com

- don't limit uefi to x86_64 (bsc#1056629)
- 3.3.15

-------------------------------------------------------------------
Tue Sep 12 15:54:47 UTC 2017 - jlopez@suse.com

- Fix proposal to not try to create more than 3 partitions in a
  DASD partition table (bsc#1058052).
- 3.3.14

-------------------------------------------------------------------
Thu Sep  7 14:28:28 UTC 2017 - schubi@suse.de

- AutoYaST: Temporary workaround to avoid crash when size 'auto'
  (which is still not supported) is used (bnc#1056182).
- 3.3.13

-------------------------------------------------------------------
Thu Sep  7 13:45:07 UTC 2017 - jlopez@suse.com

- Fix partitioner bug creating partition with custom size
  (bsc#1057049)
- 3.3.12

-------------------------------------------------------------------
Thu Sep  7 08:34:59 UTC 2017 - ancor@suse.com

- AutoYaST: support for Btrfs snapshots (part of fate#318196).
- 3.3.11

-------------------------------------------------------------------
Wed Sep  6 15:33:27 UTC 2017 - jlopez@suse.com

- Fix bug when formatting with expert partitioner (bsc#1057405).
- 3.3.10

-------------------------------------------------------------------
Wed Sep  6 14:59:46 UTC 2017 - igonzalezsosa@suse.com

- Ignore case when parsing sizes (bsc#1056715 and bsc#1055913).
- 3.3.9

-------------------------------------------------------------------
Tue Sep  5 17:24:37 CEST 2017 - schubi@suse.de

- AutoYaST: Handle sizes without unit correctly. (bnc#1056168)
- 3.3.8

-------------------------------------------------------------------
Tue Sep  5 06:00:08 UTC 2017 - ancor@suse.com

- Create Btrfs in the guided setup if requested to do so (part of
  fate#318196).
- 3.3.7

-------------------------------------------------------------------
Wed Aug 30 15:44:35 UTC 2017 - jlopez@suse.com

- Added overall summary for the expert partitioner.
- Part of fate#318196
- 3.3.6

-------------------------------------------------------------------
Mon Aug 23 19:33:27 UTC 2017 - jlopez@suse.com

- Added methods to save user data into libstorage-ng objects.
- Added subvolume shadowing control to the expert partitioner.
- Added mount point validation to the expert partitioner.
- Removed Planned::BtrfsSubvolume class.
- Part of fate#318196
- 3.3.5

-------------------------------------------------------------------
Mon Aug 21 22:47:04 UTC 2017 - knut.anderssen@suse.com

- Added support for legacy filesystems (fate#323394).
- 3.3.4

-------------------------------------------------------------------
Mon Aug 21 13:40:03 CEST 2017 - snwint@suse.de

- adjust package description in spec file

-------------------------------------------------------------------
Mon Aug 21 10:20:59 UTC 2017 - ancor@suse.com

- When displaying partition ids to the user, use names that are
  more similar to old yast-storage (part of fate#318196).
- 3.3.3

-------------------------------------------------------------------
Fri Aug 18 08:56:36 UTC 2017 - knut.anderssen@suse.com

- ReiserFS is not allowed anymore, it was already removed in SLE 12
  for new installations and was only supported for upgrades.
  (fate#323394)
- 3.3.2

-------------------------------------------------------------------
Wed Aug 16 10:24:07 UTC 2017 - ancor@suse.com

- Added deactivation of virtual devices (multipath, LVM, etc.)
  to the public API.
- Initial management of Btrfs subvolumes in the expert partitioner.
- Both as part of fate#318196
- 3.3.1

-------------------------------------------------------------------
Mon Jul 24 16:17:03 UTC 2017 - jlopez@suse.com

- Removed temporary StorageManager API.
- 0.1.32

-------------------------------------------------------------------
Thu Jul 20 14:54:17 UTC 2017 - ancor@suse.com

- Added pop-up to ask the user about multipath activation.

-------------------------------------------------------------------
Thu Jul 20 10:45:36 UTC 2017 - ancor@suse.com

- Added Btrfs subvolumes support to the AutoYaST customized
  partitioning.

-------------------------------------------------------------------
Tue Jul 18 11:43:26 UTC 2017 - ancor@suse.com

- Adjusted the guided proposal to work properly on scenarios with
  DM RAIDs.

-------------------------------------------------------------------
Mon Jul 17 09:07:39 UTC 2017 - ancor@suse.com

- Adjusted the guided proposal to work properly on scenarios with
  Multipath I/O.

-------------------------------------------------------------------
Wed Jul 12 15:37:16 UTC 2017 - ancor@suse.com

- Replaced the original prototype of the expert partitioner with
  the one coming from yast2-partitioner.
- Added #supported_fstab_options and #default_partition_id methods
  to Y2Storage::Filesystems::Type.
- Removed Y2Storage::DevicesLists and not longer needed modules
  from Y2Storage::Refinements
- 0.1.31

-------------------------------------------------------------------
Tue Jul 11 11:18:06 UTC 2017 - jreidinger@suse.com

- Added PartitionId#to_human_string and PartitionId::formattable?
- 0.1.30

-------------------------------------------------------------------
Thu Jul  6 08:11:59 UTC 2017 - gsouza@suse.com

- Added verifications for disk in network.
- 0.1.29

-------------------------------------------------------------------
Tue Jul  4 14:29:40 UTC 2017 - jlopez@suse.com

- Added new class Y2Storage::Proposal::Base.
- Proper assignment of default values for new proposals.
- 0.1.28

-------------------------------------------------------------------
Tue Jul  4 08:32:12 UTC 2017 - ancor@suse.com

- Added AutoinstProfile::PartitioningSection which allows to export
  the current system (or any other devicegraph) to an AutoYaST
  profile (only plain partitions supported so far).
- 0.1.27

-------------------------------------------------------------------
Mon Jul  3 15:50:43 UTC 2017 - jlopez@suse.com

- Adapt proposal to different situations (disable home, snapshots,
  etc)
- 0.1.26

-------------------------------------------------------------------
Mon Jul  3 13:36:17 UTC 2017 - jreidinger@suse.com

- add LvmVg#basename
- add PartitionTables::Base#delete_all_partitions
- add logger to all devices
- add LvmVg#name
- 0.1.25

-------------------------------------------------------------------
Tue Jun 27 15:05:52 UTC 2017 - igonzalezsosa@suse.com

- Add LVM support for AutoYaST partitioning (bsc#1044697).
- 0.1.24

-------------------------------------------------------------------
Tue Jun 27 09:04:58 UTC 2017 - ancor@suse.com

- More robust Y2Storage::StorageManager#probe

-------------------------------------------------------------------
Mon Jun 26 11:56:23 UTC 2017 - jreidinger@suse.com

- Added Y2Storage::MdParity#to_human_string and
  Y2Storage::MdLevel#to_human_string
- 0.1.23

-------------------------------------------------------------------
Mon Jun 26 08:56:07 UTC 2017 - aschnell@suse.com

- Added Y2Storage::Md wrapper
- 0.1.22

-------------------------------------------------------------------
Mon Jun 19 12:30:46 UTC 2017 - mvidner@suse.com

- Added Y2Storage::DiskSize#human_floor, Y2Storage::Region#size
- 0.1.21

-------------------------------------------------------------------
Mon Jun 19 08:33:19 UTC 2017 - igonzalezsosa@suse.com

- AutoinstProposal is loaded with the rest of the proposal
  classes when 'y2storage' is required.
- 0.1.20

-------------------------------------------------------------------
Mon Jun 19 06:58:54 UTC 2017 - jilopez@localhost

- Adjustments to DASD to ensure the proposal works as expected
  in such devices.
- Added Devicegraph#disk_devices to get all DASDs and disks.
- DASD support added to YAML reader and writer.

-------------------------------------------------------------------
Fri Jun 16 12:47:40 UTC 2017 - igonzalezsosa@suse.com

- Add basic support for AutoYaST customized partitioning
  (only plain partitions are supported)
- 0.1.19

-------------------------------------------------------------------
Thu Jun 15 07:17:28 UTC 2017 - jreidinger@suse.com

- Add new method StorageManager.fake_from_xml for easy loading
  of xml device graphs

-------------------------------------------------------------------
Wed Jun 14 20:21:27 CEST 2017 - aschnell@suse.com

- added probe function to StorageManager
- 0.1.18

-------------------------------------------------------------------
Thu Jun  8 09:36:29 UTC 2017 - ancor@suse.com

- Added new method BlkDevice#to_be_formatted? (needed by
  yast2-partitioner).
- 0.1.17

-------------------------------------------------------------------
Tue Jun  6 17:57:16 CEST 2017 - shundhammer@suse.de

- Don't insist on installing filesystem support packages that
  are not available in any repo (bsc#1039830)
- 0.1.16

-------------------------------------------------------------------
Thu Jun  1 10:27:25 UTC 2017 - ancor@suse.com

- Fixed a bug in LvmLv#stripe_size=

-------------------------------------------------------------------
Mon May 22 10:58:24 UTC 2017 - ancor@suse.com

- Refactored the proposal code in preparation for the AutoYaST
  implementation. Removed PlannedVolume and PlannedVolumesList
  classes in favor of new more specific classes in the Planned
  namespace.
- Fixed the proposal to never propose subvolumes that would be
  shadowed by another proposed device.

-------------------------------------------------------------------
Wed May 17 11:53:56 UTC 2017 - jreidinger@suse.com

- Add to Y2Storage::PartitionTables::Type#to_human_string
- 0.1.15

-------------------------------------------------------------------
Thu May  4 13:21:28 CEST 2017 - schubi@suse.de

- Added SCR agent .etc.mtab again until we have a proper
  alternative for it (still needed in yast2-users).
- 0.1.14

-------------------------------------------------------------------
Thu May  4 09:07:44 UTC 2017 - ancor@suse.com

- Changelog entry to document stuff that was left behind.
  See below.
- Installation proposal now generates Btrfs subvolumes when needed
  (according to control.xml and a fallback list).
- Improved and fully functional Guided Setup.
- Added new fields to ProposalSettings and renamed others (xxx_size
  instead of xxx_disk_size). Similar changes in PlannedVolume.
- New smaller and more convenient API for DiskAnalyzer.
- Many documentation (Yardoc) improvements and fixes.
- Added dummy activate callbacks (for activating a previous LUKS).
- The installer now saves a xml representation of the probed and
  staging devicegraphs before proceeding with the installation.
- New API for accessing the libstorage objects from Ruby:
  * New classes in the Y2Storage namespace offering a wrapper around
    the corresponding libstorage classes and enums: Actiongraph,
    AlignPolicy, BlkDevice, BtrfsSubvolume, Dasd, DasdFormat,
    DasdType, DataTransport, Device, Devicegraph, Disk, Encryption,
    LvmLv, LvmPv, LvmVg, Mountable, Partition, PartitionId,
    PartitionType, Partitionable, Region and ResizeInfo.
  * Mixins StorageClassWrapper and StorageEnumWrapper to define more
    wrappers as needed.
  * Removed EnumMappings.
  * Removed most refinements in Y2Storage, functionality moved to
    the new classes.
  * Marked DevicesList as deprecated.
  * Marked some refinements as deprecated.

-------------------------------------------------------------------
Tue Apr 25 08:50:10 UTC 2017 - jreidinger@suse.com

- add Gpt#pmbr_boot(?/=) methods for protective MBR
- 0.1.13

-------------------------------------------------------------------
Thu Mar 23 08:18:36 UTC 2017 - jilopez@localhost

- Adapted prepdisk client to work in update mode.

-------------------------------------------------------------------
Tue Mar 21 17:11:37 CET 2017 - schubi@suse.de

- Added to_s in ProposalSettings

-------------------------------------------------------------------
Thu Mar  9 12:47:11 UTC 2017 - ancor@suse.com

- Partially adjust the proposal settings according to control.xml.

-------------------------------------------------------------------
Fri Mar  3 12:30:12 UTC 2017 - ancor@suse.com

- Improved the EnumMappings module.
- 0.1.12

-------------------------------------------------------------------
Thu Feb 16 11:37:57 UTC 2017 - ancor@suse.com

- Improvements in the devicegraph query interface: added an
  EncryptionLists class and adapted all the other classes to take
  several encryption-related scenarios into account.
- 0.1.11

-------------------------------------------------------------------
Wed Feb  8 13:19:24 UTC 2017 - ancor@suse.com

- Added a prototype of the "Guided Setup" wizard to configure the
  proposal settings.

-------------------------------------------------------------------
Wed Jan 25 14:35:38 UTC 2017 - ancor@suse.com

- Proper management of completely empty disks (no partition table,
  no file-system and no LVM PV) in the proposal.
- Improved FreeDiskSpace and Disk#free_spaces to correctly handle
  disks without partition table.
- 0.1.10

-------------------------------------------------------------------
Thu Jan 19 10:54:22 CET 2017 - shundhammer@suse.de

- Install storage-related software packages as needed: Migrated
  UsedStorageFeatures to storage-ng and added PackageHandler
- 0.1.9

-------------------------------------------------------------------
Tue Jan 17 12:07:18 UTC 2017 - ancor@suse.com

- Improved StorageManager that complies to the Singleton pattern
  and includes a revision counter for the staging devicegraph.
- 0.1.8

-------------------------------------------------------------------
Mon Jan 16 12:27:03 UTC 2017 - ancor@suse.com

- Added 'fstab_options' key to the YAML representation of the
  devicegraphs used for testing.
- 0.1.7

-------------------------------------------------------------------
Thu Jan  5 15:27:02 UTC 2017 - ancor@suse.com

- Y2Storage::DiskAnalyzer - distinguish disks with no MBR gap
  (0 bytes gap) from cases where the MBR gap is not applicable.
  This fixes the proposal for some LVM scenarios with legacy boot.

-------------------------------------------------------------------
Fri Dec 23 12:44:24 UTC 2016 - ancor@suse.com

- Removed unused ProposalDemo client (kind of obsoleted by
  Dialogs::InstDiskProposal)

-------------------------------------------------------------------
Wed Dec 21 12:01:32 UTC 2016 - ancor@suse.com

- Improvements in the devicegraph query interface
  (DisksLists#with_name_or_partition)
- 0.1.6

-------------------------------------------------------------------
Tue Dec 20 06:39:28 UTC 2016 - ancor@suse.com

- Fixed partitioning proposal to not fail when trying to create
  very small partitions (like bios_boot), to work better with uneven
  spaces (not divisible by the minimal grain) and to reduce the
  gaps between partitions.

-------------------------------------------------------------------
Wed Dec 14 16:01:00 UTC 2016 - ancor@suse.com

- Write more precise information in the logs (DiskSize#to_s)

-------------------------------------------------------------------
Tue Dec 13 11:11:20 UTC 2016 - ancor@suse.com

- Proposal does not try to set the boot flag if not supported
  (for example, GPT partition tables)

-------------------------------------------------------------------
Fri Dec  9 10:30:33 UTC 2016 - aschnell@suse.com

- Adapted to several changes in libstorage-ng

-------------------------------------------------------------------
Fri Nov 25 16:39:13 UTC 2016 - ancor@suse.com

- Improvements in the LVM-based proposal

-------------------------------------------------------------------
Tue Nov 22 15:32:41 UTC 2016 - ancor@suse.com

- Improvements in Refinements::DevicegraphLists

-------------------------------------------------------------------
Tue Nov 22 12:28:39 UTC 2016 - ancor@suse.com

- Convenience method to check for GPT
- Several methods added to most of the DevicesLists classes
- 0.1.5

-------------------------------------------------------------------
Thu Oct 27 12:49:59 UTC 2016 - ancor@suse.com

- Better management of LVM partitions in Proposal::SpaceMaker

-------------------------------------------------------------------
Thu Oct 27 13:46:39 CEST 2016 - aschnell@suse.com

- mount special filesystems in target during installation

-------------------------------------------------------------------
Wed Oct 26 12:26:58 UTC 2016 - ancor@suse.com

- LVM classes added to Refinements::DevicegraphLists

-------------------------------------------------------------------
Wed Oct 12 13:38:38 UTC 2016 - cwh@suse.com

- Use own textdomain (storage-ng instead of storage) (bsc#1004050)
- 0.1.4

-------------------------------------------------------------------
Fri Sep 30 14:05:08 UTC 2016 - ancor@suse.com

- Added new inst_prepdisk client - first version in which the
  installer commits the changes to the target disk(s).
- 0.1.3

-------------------------------------------------------------------
Tue Sep 27 06:00:45 UTC 2016 - ancor@suse.com

- More reusable DiskAnalyzer.
- Use libstorage mechanisms to check for windows partitions.
- Added new minimalistic inst_disk_proposal client.
- 0.1.2

-------------------------------------------------------------------
Mon Aug  1 13:11:13 UTC 2016 - ancor@suse.com

- Namespaces adapted to avoid conflicts with old yast2-storage
  and to follow the new YaST convention.
- 0.1.1

-------------------------------------------------------------------
Thu Feb 25 16:35:57 CET 2016 - aschnell@suse.com

- initial package with yast2-storage-ng, successor of yast2-storage

Places

File yast2-storage-ng.changes of Package yast2-storage-ng (Revision 90f4aa38c17ff269d3bb13d38787e7a9)

Places