openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File aria2.changes of Package aria2 (Revision 5b5e6bf9f238c847806df425f0299550)

Currently displaying revision 5b5e6bf9f238c847806df425f0299550 , Show latest

-------------------------------------------------------------------
Wed Mar  8 22:05:35 UTC 2017 - sfalken@opensuse.org

- Edited %files section to clear unpackaged files builderror in
  openSUSE:Factory

-------------------------------------------------------------------
Thu Jan 19 13:32:33 UTC 2017 - dasantiago@suse.com

- Version bump to 1.31.0
  * Better error message when local file status cannot be retrieved
  * Fix assertion failure in SimpleRandomizer::getRandomBytes
  * Add option content-disposition-default-utf8

-------------------------------------------------------------------
Sat Dec 17 16:03:55 UTC 2016 - mpluskal@suse.com

- Update to version 1.30.0:
  * Fix bug that --disable-websocket causes build error
  * Fix bug that lower bound of optimize-concurrent-downloads becomes 1
  * Print DHT nodes with -S option
  * Take into account address family when resolving DHT node address
  * Allow block device file to -i option
  * Expand ${HOME} to user's home directory in several options
  * The following options implement this substitution:
    --ca-certificate
    ---certificate
    --dht-file-path
    --dht-file-path6
    ---dir
    --input-file
    --load-cookies
    --log
    --metalink-file
    --netrc-path
    --on-bt-download-complete
    --on-download-complete
    --on-download-error
    --on-download-start
    --on-download-stop
    --on-download_pause
    --out
    --private-key
    --rpc-certificate
    --rpc-private-key
    --save-cookies
    --save-session
    --server-stat-if
    --server-stat-of
    --torrent-file
  * Document that libaria2 is not thread safe
- Fix typos in changelog

-------------------------------------------------------------------
Thu Nov 17 17:51:29 UTC 2016 - mpluskal@suse.com

- Update to version 1.29.0:
  * WinTLS: Fix busy loop on write error
  * Support 1xx non-final response
  * Update wslay
  * Don't download piece which is filtered out (e.g., --select-file)

-------------------------------------------------------------------
Tue Oct 18 22:28:05 UTC 2016 - mpluskal@suse.com

- Update to version 1.28.0:
  * Restore LTLIBINTL in src/Makefile.am
  * Add --keep-unfinished-download-result option
  * Fix -Wexpansion-to-defined warning with clang-3.9
  * Fix bug that file name is not logged with --conditional-get

-------------------------------------------------------------------
Mon Oct  3 19:09:07 UTC 2016 - mpluskal@suse.com

- Update to version 1.27.1:
  * Add missing libssl_compat.h to SRCS
- Changes for version 1.27.0:
  * Fix possible cause of crash if UDP tracker is used
  * Remove custom ftruncate64 for Android
  * The latest NDK versions support ftruncate64, so building a
    local copy of ftruncate64 is no longer needed.
  * Also, the arm and x86 builds of ftruncate64 failed when
    targeting API level 21 or higher, as they include which are not
    present starting from API level 21.
  * Fix typo found by Debian's Lintian
  * Add --save-not-found option
  * Compile with openssl 1.1.0

-------------------------------------------------------------------
Thu Sep  1 07:40:55 UTC 2016 - mpluskal@suse.com

- Update to version 1.26.1:
  * Make assertion hold

-------------------------------------------------------------------
Sun Aug 21 10:47:01 UTC 2016 - mpluskal@suse.com

- Update to version 1.26.0:
  * aria2mon: Replace client.call with local method
  * Reorder a note section in aria2c.rst
  * bash_completion: Add missing options which takes one of
    pre-defined values
  * Replace "/" with "-" in magnet dn name when used as in-memory
    download name
  * Fix Dockerfile.raspberrypi to correctly decompress expat
    archive
  * Enable ccache in travis-ci
  * Enable OSX/macOS build for travis
  * Better auto-renaming
  * Log number of items loaded from input file
  * Link external libraries to libaria2 with --enable-libaria2
  * Allow seconds for seed-time (fractional minutes)
- Drop no longer needed aria2-no-return-in-nonvoid-function.patch

-------------------------------------------------------------------
Wed Jul 27 22:04:15 UTC 2016 - jengelh@inai.de

- Trim filler phrases from description.
  Explicitly add BR:pkgconfig so pkgconfigdeps.sh can autocreate
  pkgconfig() symbols.

-------------------------------------------------------------------
Mon Jul 25 13:57:04 UTC 2016 - mpluskal@suse.com

- Update to version 1.25.0:
  * Update third-party libraries for binary releases
  * Send have message without too much delay
  * Also send bitfield rather than have messages if bitfield 
    message is equal to or less than the sum of have messages 
    which otherwise would be sent.
  * Fix bug that causes bogus EOF connection failure in BitTorrent 
    downloads
  * Fix frequent interested/not interested message transmission
  * Fix frequent choke/unchoke message transmission
  * Try to use available URI if all pooled requests are sleeping
  * Update expat in OSX build
  * aria2mon: Add --secret option
  * Set server status error on network failure in server
    performance profile
  * Disable AI_ADDRCONFIG if no IPv4/IPv6 address is configured for
    any interface
  * Russian manual: Update aria2c.rst
  * Apply --retry-wait on 503 only
  * Ensure that lowest speed check is done even when download speed 
    is 0
  * Document that -o is always relative to -d option
  * Allow larger ut_metadata size
  * mingw: Change FD_SETSIZE to 32768
  * Fix compile error on OS X
- Add aria2-no-return-in-nonvoid-function.patch

-------------------------------------------------------------------
Sat Jun 18 10:02:37 UTC 2016 - mpluskal@suse.com

- Update to version 1.24.0:
  * BitTorrent: Allow 32KiB request
  * Don't unchoke peer which is not interested in us
  * Fix bug that evaluation of Peer::amChoking is negated
  * Faster seed/download on fast connection
  * Increase DHT task concurrency to 15
  * Fixed mmap failure check with MAP_FAILED flag
  * Added file size overflow check for mmap on 32bit os
  * Use standard percent-encode for tracker request query
  * mingw32: Gain privilege before opening files
  * Restart active download to apply previously not applicable
    options

-------------------------------------------------------------------
Tue May 17 08:16:35 UTC 2016 - mpluskal@suse.com

- Update to version 1.23.0:
  * Simplify cache write
  * Allow subsecond value in ns cookie.txt file's expiry time field
  * Adjust chromium cookie time
  * import-po: iterate on glob, not ls output
  * Add --stderr option to redirect all stdout log output to stderr
  * Add "hide" to --download-result option
  * Fix downloaded metaurl torrent filename
  * Add a little bit of color to have a better visual of important 
    informations
  * Update README URLs based on HTTP redirects
  * Relocate from github.com/tatsuhiro-t/aria2 to 
    github.com/aria2/aria2
  * mingw: Defer the falloc warning until falloc is specified by 
    option
  * Add bittorrent key to aria2.tellStopped status
  * Addsystem.listNotifications RPC method
  * Report CheckIntegrity info in tellStatus
- Update download url

-------------------------------------------------------------------
Sat Apr 30 23:25:52 UTC 2016 - zaitor@opensuse.org

- Update to version 1.22.0:
  * Add description about possible fragmentation with
    --file-allocation=trunc.
  * Make single-entry metalink download with multi-file torrent
    work.
  * Add all contributor's names in AUTHORS.
  * Ignore floating number in torrent file.
  * Added support for a dynamic management of the number of
    concurrent downloads as a function of the overall bandwidth
    observed. This change adds --optimize-concurrent-downloads
    option.
  * Add --stream-piece-selector=random.

-------------------------------------------------------------------
Thu Mar 31 20:24:17 UTC 2016 - mpluskal@suse.com

- Update to 1.21.0
  * SessionSerializer: Fix bug that pause=true is added to wrong 
    item
  * Add "following" to aria2.tellStatus response key as reverse 
    link for followedBy
  * mingw: Add warning for falloc
  * Update ciphers in AppleTLS
  * OSX: Enable libssh2 and sftp
  * Update OSX dependencies
  * Fix compile error without TLS support
  * Add support for using gnutls system wide crypto policy
- Update project url

-------------------------------------------------------------------
Sun Mar  6 08:33:14 UTC 2016 - mpluskal@suse.com

- Update to 1.20.0
  * src/WinConsoleFile.cc: fix colour
  * configure.ac: fix autoreconf error
  * Don't inherit file descriptor to child process
  * Update Russian version documentation
  * Add "seeder" key to tellStatus RPC response
  * WinTLS: Fix hang because of buffered received data
  * Add --max-mmap-limit option
  * mingw: Use SetFileValidData to make --file-allocation=falloc
    work
  * Retry with 504 status code
  * Increase DHT transaction ID from 2 to 4 bytes to avoid conflict
  * Update wslay
  * Add --enable-werror option to configure to enable warning flags
  * Don't modify user variables (e.g., CFLAGS, LIBS, etc)
  * Improve error message when loading pkcs12 file failed
  * Updated dependency and source url's
  * Reduce delay in tracker request
  * Disable IPv6 on non-async NameResolver if configuration wants
  * Fix mysterious 1 second delay with async DNS
  * Fix bug that UDP port was incorrectly used in UDP tracker 
    announce request
  * Refactor HttpRequest
  * Send Want-Digest as per RFC 3230
  * Try all found address set to bind sockets with 
    --multiple-interface
  * Replace sourceforge references with aria2.github.io
  * Add system.listMethods RPC method
  * Support content-range from non-compliant server
  * Reduce UDP tracker request timeout
  * Apply --retry-wait when retrying after 404
- Spec file cleanup
  * Dependencies updated
  * Install localised manpages
  * Simplify conditions

-------------------------------------------------------------------
Sun Dec  6 16:40:34 UTC 2015 - mpluskal@suse.com

- Update to 1.19.3
  * Fix bug that pause/unpause seeding torrent prevents new 
		downloads from starting
	* Add --bt-enable-hook-after-hash-check option
	* Add --socket-recv-buffer-size option
	* Set the maximum socket receive buffer in bytes. Specifing 0 
		will disable this option. This value will be set to socket file 
		descriptor using SO_RCVBUF socket option with setsockopt() call.
	* Disable --deferred-input when --save-session is used together
	* base32: decode lowercased characters as well
	* Send the last error message as part of tellStatus RPC response
	* Don't enable mmap if file allocation is disabled
	* Evict timed out pooled socket periodically
	* Don't write control file if content is not changed from 
		previous one
	* Remove content-length and content-range if transfer-encoding 
		is given
	* Retry after 404 status if --max-file-not-found > 0
- Build shared library

-------------------------------------------------------------------
Sat Nov 21 10:47:45 UTC 2015 - mpluskal@suse.com

- Update to 1.19.2
  * Fix bug that progress summary is not shown timely
- Changes for 1.19.1
	* Update README.android
	* Providing some workarounds about CA certificates and standard 
		output
	* Return 400 HTTP status code if exception was caught while 
		executing RPC method
	* Fix on-download-error is executed even if download succeeded
	* Increase --select-file upper bound to 1m for torrent 
		containing lots of files
	* Fix busy loop with --dry-run and 4xx response for URI listed 
		in metalink
	* Make LibuvEventPoll compatible with the latest libuv again
	* gnutls: Allow SIGN-RSA-SHA1 for compatibility reason
	* Make script compatible with both Python 2 and 3
	* Make config and cache files conform to XDG
	* ftp, sftp: Fix heap-after-free bug on exception
	* ftp: Fix timeout when reusing FTP connection
- Update download url

-------------------------------------------------------------------
Mon Aug  3 22:22:42 UTC 2015 - mpluskal@suse.com

- Update to 1.19.0
  * android: Build and link with zlib Previously, we linked with 
    zlib shipped with NDK, but it seems this is not part of NDK 
    API, and thus could break our app.
  * Allow netrc-path to be specified in the config file Adds 
    --netrc-path to override default .netrc search path.
  * Exit with 32 status code if checksum verification failed
  * Add SFTP support using libssh2 aria2 can now download files 
    via sftp protocol: aria2c sftp://.... --ssh-host-key-md option 
    is added to specify expected server's fingerprint.
  * Added Dockerfile to cross complile aria2 for RaspberryPI (armhf)
  * multiple interface support for link aggregation Adds 
    --multiple-interface option.  Patch from Sarim Khan
  * Run on-bt-download-complete command when -V reports download 
    finished
  * Use dedicated DiskWriter in MultiDiskFileAllocationIterator 
    We have to use dedicated DiskWriter instead of 
    (*entryItr_)->getDiskWriter().  This is because 
    SingleFileAllocationIterator cannot reopen file if file is 
    closed by OpenedFileCounter.
  * Fix getrandom for system with libc not including errno or 
    systems not supporting ENOSYS in the first place.
  * Don't send back rpc-secret option value in 
    aria2.getGlobalOption RPC method
  * Make libuv default off
  * Fixed slow RPC response
  * Fix getrandom interface detection
- Enable ssh suport using libssh2

-------------------------------------------------------------------
Sun Apr 26 20:04:40 UTC 2015 - mpluskal@suse.com

- Add dependency on libuv for current Tumbleweed
- Remove _DATE_ and _TIME_

-------------------------------------------------------------------
Tue Apr 14 19:31:52 UTC 2015 - benoit.monin@gmx.fr

- update to version 1.18.10:
  * Add encoding specifier to Russian man page
    Fixes GH-341
  * Mingw: Use _wgetenv to get user's home directory
    Fixes GH-342
  * Handle linux getrandom returning EINTR on interrupts/signals
    Fixes GH-336
- additional changes from 1.18.9:
  * Support HTTP date ending "+0000" as well as "GMT".
    Closes GH-330
  * Revise getRandom facilities
    Closes GH-320
  * Added debug log of all Metalink URLs with final priorities
  * Use gcc-4.9 and android-16 API level for android build
  * Add --bt-force-encryption option
  * TLS: Fix memory leak with OpenSSL
  * Warn about insecure SSL connections.
    Fixed GH-313
  * Add --min-tls-version option
  * LibsslTLSContext: Disable SSLv3 and enable ECDHE cipher suites
  * Add Dockerfile.mingw
  * Fix crash when JSON batch response vector is empty
  * Fix doc: Wrong rpc secret token prefix
  * Add --bt-detach-seed-only option
  * mingw: Use MoveFileExW for better atomic move
  * Work around libintl's vprintf macro messing with
    OutputFile::vprintf
  * Fix crash on OSX when proxy is used
    See GH-275
  * Support Adler32 checksum

-------------------------------------------------------------------
Wed Dec 17 10:12:43 UTC 2014 - p.drouand@gmail.com

- Update to version 1.18.8
  + WinTLS: Fix abrupt connection closing and closing in general.
  + Fixes GH-277
  + LibsslTLSSession: Treat 0 from readData as EOF
  + Enable dynamicbase and nxcompat in Windows binaries
  + Fix crash in OpenedFileCounter::ensureMaxOpenFileLimit()
  + The crash happens if PieceStorage and/or DiskAdaptor are not 
    initialized in one of active RequestGroups.
  + mingw32: Fix bug that aria2 does not read piped stdin
  + Fix std::length_error when no_proxy is used
  + This is regression introduced in 8cada497.
  + Try to set sane limits for RLIMIT_NO_FILE
    E.g. on OSX the default is 256, which isn't exactly compatible
    with torrent downloads.
    Closes GH-257
  + Delay auth failures instead of PBKDF2
    Closes GH-256
- Split out language files and recommend the subpackage

-------------------------------------------------------------------
Fri Jul 11 15:44:58 UTC 2014 - reddwarf@opensuse.org

- Update to aria2 1.18.5
  * Ignore error when setting DSCP value
- Update to aria2 1.18.4
  * Added support for RPC channel encryption in aria2rpc
  * Add aria2.saveSession RPC method
  * Add numStoppedTotal key to aria2.getGlobalStat() RPC method response
  * Better handling of 30x HTTP status codes
  * Implement new RPC authorization using --rpc-secret option
  * Add --enable-color option to enable/disable terminal color output
  * Add DSCP support
  * gnutls: Don't fail handshake if returned error is not fatal
  * Add workaround GnuTLS bug with OCSP status extension and
    non-blocking socket
  * Make GnuTLS log level dependent on the aria2 ones
- Remove ca-certificates requirement. It conflicted with the same recommendation
- Stop specifying a CA bundle. Let the SSL library use the "system" one.

-------------------------------------------------------------------
Sun Jan 05 21:28:38 UTC 2014 - pascal.bleser@opensuse.org

- update to 1.18.3:
  * fix crash if unpause failed before assigning BtProgressInfoFile object
  * fix bug that numOpenFile_ is not reduced when MultiDiskAdaptor is deleted;
    this bug caused assertion error in RequestGroupMan::ensureMaxOpenFileLimit

-------------------------------------------------------------------
Sat Jan 04 17:45:54 UTC 2014 - pascal.bleser@opensuse.org

- update to 1.18.2:
  * fix crash when metaurl contains unsupported URI or text
  * fix bad fork() return value handling
  * use some colors in progress reports (where available)
  * limit number of opened file globally with --bt-max-open-files option
  * don't fail multiple concurrent dl same file if auto-file-renaming is
    enabled
- add /etc/ssl/ca-bundle.pem as the CA bundle for aria2, and add a
  recommends for ca-certificates

-------------------------------------------------------------------
Sat Nov  2 21:23:47 UTC 2013 - reddwarf@opensuse.org

- Update to 1.18.1
  * LibsslTLSContext: Remove weak cipher suite
  * AppleTLS: Enable --certificate
  * util::percentEncodeMini: Fix regression bug removed unsignedness
  * Log exception; throw error if loading private key and/or certificate
    failed
  * Provide internal ARC4 implementation
  * Internal implementation of DHKeyExchange
  * PKCS12 support in --certificate and --rpc-certificate options.
  * Add --disable-ssl configure option
  * Add internal md5 and sha1 message digests
  * Fix AppleMessageDigestImpl use with large data
  * Set old cookie's creation-time to new cookie on replacement
  * Fix link error with Android NDK r9

-------------------------------------------------------------------
Wed Sep 11 16:47:49 UTC 2013 - reddwarf@opensuse.org

- Update to 1.18.0
  * Use AM subdir-objects
  * AM_SILENT_RULES([yes]) with backwards-compatiblity
  * Fix automake-1.14 am_aux_dir
  * Require external gettext for --enable-nls
  * Make AX_CXX_COMPILE_STDCXX_11 test for -stdlib=libc++ via std::shared_ptr
  * Make the configure check for C++11 compiler mandatory
  * Always build doc/manual-src
  * Implement a simple resource lock (threading)
  * Check for sphinx-build during configure
  * Add --with-disk-cache configure option
  * Change defaults: Enable 16M disk cache by default.
  * Always save control file if --force-save is given
  * Set log level DEBUG for unittests
  * Check that C++ compiler supports override keyword
  * Use AX_CXX_COMPILE_STDCXX_11 macro to detect C++0x/C++11 support in
    compiler
  * Require -std=c++11 and use std::shared_ptr instead of SharedHandle
  * Join URI on redirect
  * Send HAVE message to the peer which the piece is downloaded from
  * Improvements to --follow-torrent=false documentation.
  * SessionSerializer: Truly unique URIs
  * Make getOption RPC method return option for stopped downloads
  * SessionSerializer: Save spent URIs as well as remaining ones
- Remove support for end of life openSUSE versions (<= 12.1)

-------------------------------------------------------------------
Fri Jun  7 11:41:50 UTC 2013 - reddwarf@opensuse.org

- Update to 1.17.1
  * Add code to detect rst2html.py or rst2html
  * Enable multicast loopback in BitTorrent local peer discovery
  * Enable TLS1.1 with gnutls build
  * Check zlib availability usin AC_CHECK_LIB
  * Treat response is completed if EOF is received before streamFilter
    completes
  * uitos: Fix off-by-one error bug
  * Add configure support for linking tcmalloc_minimal and/or jemalloc
  * Close GZipFiles in the d'tor
  * Add libaria2, C++ library interface to aria2 (not built)
  * Add missing check for sigaction
  * Fix cached data is not flushed when downloaded data is less than
    16KiB
  * LibUV: Implement LibuvEventPoll

-------------------------------------------------------------------
Mon May  6 11:57:22 UTC 2013 - reddwarf@opensuse.org

- Update to 1.17.0
  * Updated Russian manual
  * Updated Portuguese manual
  * Append --static to pkg-config arguments when ARIA2_STATIC=yes
  * Save options directly specified for download in --save-session
  * Save URI returned only from FileEntry::getRemainingUris()
  * Print linked 3rd party libraries with version in aria2c -v output
  * Use info level log for system trusted ca imports failure
  * Remove deprecated options: --enable-direct-io and --metalink-servers
  * Deprecate --enable-async-dns6
  * Fix uninitialized UDPTrackerClient::numWatchers_
  * Implement simple Happy Eyeballs for HTTP/FTP downloads
  * Parallel A and AAAA record lookups with c-ares

-------------------------------------------------------------------
Mon Mar 25 09:29:28 UTC 2013 - pascal.bleser@opensuse.org

- update to 1.16.5:
  This release fixes the bug that invalid range error is thrown when
  requesting range starts from 0 in HTTP download.

- changes from 1.16.4:
  This release fixes the bug that active downloads are not saved with
  --save-session-interval and the bug that aria2 hangs when size of
  download result exceeds its maximum. BitTorrent UDP tracker support
  was added. If the filename specified using --save-session ends with
  ".gz", aria2 stores the session file in gzipped form. The -i option
  can handle this gzipped file as well as plain text file.

-------------------------------------------------------------------
Tue Feb 19 17:45:01 UTC 2013 - reddwarf@opensuse.org

- update to 1.16.3
  * Fix invalid iterator handling when deleting RequestGroup
  * Check SSL_OP_NO_COMPRESSION is available before using it
  * Fix bug returnPeer is not called if sequence_ == INITIATOR_SEND_KEY
  * Accept k and m as well as K and M in util::getRealSize()
  * Added --save-session-interval option
  * Use request URI as referer if --referer="*" is given
  * Log warn if unknown option is found in config file or -i file
  * Added --console-log-level option

-------------------------------------------------------------------
Thu Dec 27 23:03:44 UTC 2012 - reddwarf@opensuse.org

- Update to 1.16.1
  * adds the ability to persist GID across sessions
  * now GID is 64 bits binary data and represented by 16 characters
    hex string in RPC query
  * the disk cache feature was added
  * the console readout was redesigned

-------------------------------------------------------------------
Sun Dec 02 09:50:01 UTC 2012 - pascal.bleser@opensuse.org

- update to 1.16.0:
  * adds SSL/TLS encryption support in RPC transport
  * the new RPC method aria2.appendUri is added, which is a wrapper to
    aria2.changeUri
  * the Content-Disposition parser is now RFC 6266 conformant
  * the resource leak in XmlParser, JSON and Bencode parser was fixed
  * the uploaded data size calculation bug was fixed

-------------------------------------------------------------------
Tue Oct 23 23:04:40 UTC 2012 - reddwarf@opensuse.org

- Update to version 1.15.2:
  Fixes several critical bugs. It also adds new features such as
  TLS SNI and CORS support. The --file--allocation option now take
  another value trunc. The new option --enalbe-mmap was added.
  aria2 now uses system-wide SSL/TLS certificates by default, which
  eliminates the requirement to specify --ca-certificate option.
- Remove aria2-1.15.1-system_certificates.patch. Applied upstream.
- Remove autotools BuildRequires since we don't have patches any more.

-------------------------------------------------------------------
Thu Jul  5 19:05:45 UTC 2012 - cfarrell@suse.com

- license update: SUSE-GPL-2.0-with-openssl-exception
  SPDX format for this license - which has an openssl exception

-------------------------------------------------------------------
Fri Jun 29 12:24:33 UTC 2012 - reddwarf@opensuse.org

- Remove aria2-atoi.patch, aria2-cares-lib64.patch and
  aria2-cares-static.patch
- Run spec-cleaner
- Use xml2 instead of expat as prefered by upstream
- Add GnuTLS support
- Merge bash-completion support into the main package
- Change license tag to GPL-2.0+ since it doesn't use OpenSSL
- Use pkgconfig() style BuildRequires
- Add aria2-1.15.1-system_certificates.patch

-------------------------------------------------------------------
Fri Jun 29 10:19:20 UTC 2012 - reddwarf@opensuse.org

- Update to version 1.15.1:
  + Return appropriate HTTP status code on RPC failure.  In this
    change, we return 404 if the request path is neither /json-rpc
    nor /rpc. If XML feature is not enabled and /rpc is requested,
    return 404.  If XML parser failed, return 400. JSON parser
    failure has been handled well in the existing code.
  + Ignore unacceptable options in RPC request instead of throwing
    error. This change allows RPC client to send same options for
    the different type of downloads.
  + Handle sockaddr_in.sin_len and sockaddr_in6.sin6_len.  Check
    sockaddr_in.sin_len and sockaddr_in6.sin6_len are available and
    assign values to them properly.  This change fixes unit test
    error and most error related to getnameinfo() on netbsd.
  + Removed dependency on inet_aton.  Implemented inetPton as a
    replacement of inet_aton. inetPton is implemented using
    net::getBinAddr.  This change fixes bug#3525424.
  + Added --with-bashcompletiondir configure option.  By default,
    bash_completion file named aria2c is installed to the directory
    $prefix/share/doc/aria2/bash_completion.  To change the install
    directory of the file, use --with-bashcompletiondir option.
  + Converted README.asciidoc into README.rst
  + Use Sphinx for aria2 manual page documentation.  The source
    files for manual pages are placed under doc/manual-src.  The
    manual pages are generated under doc/manual-src/$LANG/_build.
    The HTML version manual page was dropped from the distribution
    archive.
  + Fixed the bug which prevents --bt-lpd-interface from working.
    Fixes bug#3520125
- Remove support for old distributions

-------------------------------------------------------------------
Mon Apr  9 12:15:39 UTC 2012 - dimstar@opensuse.org

- Update to version 1.15.0:
  + Use CreateProcessW instead of CreateProcessA in MinGW build.
    This means filename is now passed as wchar string, not UTF-8
    encoded char string.
  + Check with pkg-config only: c-ares, openssl, sqlite3 and zlib.
  + Fixed compile error with i686-w64-mingw32 and
    x86_64-w64-mingw32 cross compilers.
  + Get the home directory of the effective user ID using
    getpwuid() if $HOME is not defined.
  + Don't use locale dependent toupper and tolower.
  + Rewritten TLS hostname check based on RFC 6125 for both GNUTLS
    and OpenSSL builds.
  + Added --bt-remove-unselected-file option.  Removes the
    unselected files when download is completed in BitTorrent. To
    select files, use --select-file option. If it is not used, all
    files are assumed to be selected. Please use this option with
    care because it will actually remove files from your disk.
    This option is default to false.
  + Fixed compile error on Open Solaris. Fixes bug#3497518
  + Added JSON-RPC over WebSocket.
  + Fixed assertion failure if Chunked encoding along with
    Content-Length is used.
  + Fixed clang and gcc-4.7 warning and errors.
  + Fixed the bug that aria2 cannot read line longer than 4096
    bytes from the file specified by --input-file option
    (sf#3495336).
- Drop aria2-1.14.2-gcc47.patch: fixed upstream.

-------------------------------------------------------------------
Tue Mar 20 21:44:22 UTC 2012 - boris@steki.net

- Add aria2-1.14.2-gcc47.patch: Fix build with gcc 4.7

-------------------------------------------------------------------
Tue Mar 13 08:32:18 UTC 2012 - cfarrell@suse.com

- license update: SUSE-GPL-2.0+-with-openssl-exception
  Package expressly allows linking against openSSL

-------------------------------------------------------------------
Wed Feb 29 18:56:56 UTC 2012 - pascal.bleser@opensuse.org

- update to 1.14.2:
  * only accepts 32 bit integer values from int and i4 elements in XML-RPC;
    fixed overflow bug in aria2.tellWaiting and aria2.tellStopped RPC methods
  * updated Spanish, Italian, Russian and Chinese (Simplified) translations
  * fixed the bug that aria2 does not listen on address given in --interface
  * check scheme part in redirected URI more strictly: the previous
    implementation mistakenly sees '/abspath?uri=http://foo' as an absolute URI
    because it contains '://', but actually it is not; this change checks
    scheme part is constructed in the allowed character set described in RFC
    3986 Section 3.1
  * allow missing params in XML-RPC request
  * fixed "Max payload length exceeded or invalid" error when the number of
    pieces is very large
  * added --deferred-input option; if true is given to --deferred-input option,
    aria2 does not read all URIs and options from file specified by -i option
    at startup, but it reads one by one when it needs later; this may reduce
    memory usage if input file contains a lot of URIs to download; if false is
    given, aria2 reads all URIs and options at startup;tThis option defaults to
    false

-------------------------------------------------------------------
Sat Feb 18 11:04:36 UTC 2012 - zaitor@opensuse.org

- Update to version 1.14.1:
  + This version fixes the bug that prevents the --checksum option
    from working correctly.
  + It also fixes the bug where a log file was not created if a
    warn level log was created before the log file was opened.
  + Now aria2 doesn't assume the download has completed just 
    because file size matched. The old behavior is problematic,
    because aria2 just assumes the download is completed, but in
    reality it is not.

-------------------------------------------------------------------
Thu Jan 12 11:30:29 UTC 2012 - coolo@suse.com

- change license to be in spdx.org format

-------------------------------------------------------------------
Mon Dec 26 11:06:49 UTC 2011 - pascal.bleser@opensuse.org

- update to 1.14.0:
 * updated Chinese (Simplified), Spanish, French and Russian translations
 * ignore peer which possibly sent bad data in next few minutes. In aria2, one
   piece is downloaded from several peers, so when hash check failed for that
   piece, it cannot determine which peer(s) sent bad data. So, we ignore peer
   who sent last block of data in random minutes. We use randomized timeout
   because all peers get waken up at the almost same time.
 * Added suggestion for unknown/ambiguous options. The help messages shown when
   argument error were redesigned and less verbose now. When unknown or
   ambiguous option is given, show suggestions like "Did you mean...". Some
   constant values related to levenstein distance are borrowed from git help.c.
 * Added --stop-with-process=PID option. This feature stops application when
   process PID is not running. This is useful if aria2 process is forked from a
   parent process. The parent process can fork aria2 with its own pid and when
   parent process exits for some reason, aria2 can detect it and shutdown
   itself.
 * Support IPv6 address for FTP via HTTP tunneling.
 * The previous implementation could not handle the situation when user,
   password and proxy URI is given various order. Now we just set rules:
   username set in --*-proxy-user overrides username in --*-proxy option, no
   matter in any order username, password and proxy URI are parsed. Likewise,
   password set in --*--proxy-passwd overrides password in --*-proxy option.
 * Changed format of ETA. Now no leading 0 is used. If hour part and/or min
   part is non-zero, and sec part is 0, sec part is omitted, like this "1h3m".
 * Rewritten Metalink XML parser. Now we don't strip white spaces while parsing
   Metalink V3 document.
 * Now xml attribute and characters in RPC request is not stripped at all.
 * Fixed bug that some information such as port number is lost if redirect URI
   contains only path component.
 * Apply PREF_MAX_CONNECTION_PER_SERVER to BitTorrent WEB Seeding hosts.
 * Reuse in-flight and pooled URIs when a download is paused.
 * Deprecated --metalink-server option. Use --split option instead.
 * Made max value of --select-file to 65535
 * Use same domain-match algorithm for no-proxy and netrc. Now "example.org"
   does not domain-match ".example.org" in both functions.
 * For waiting or paused downloads, the options listed in Input File subsection
   in man page are available in aria2.changeOption RPC method, except for
   following options: dry-run, metalink-base-uri, parameterized-uri, pause and
   piece_length.
 * Made --download-result, --save-session, --server-stat-of and --save-cookies
   option available in aria2.changeGlobalOption. In addition to them, the
   options listed in Input File subsection in man page are also available,
   except for following options: checksum, index-out, out, pause and
   select-file.
 * Made --uri-selector option available in -i list.
 * Support IPv6 literal address in proxy option.
 * Support IPv6 CIDR block in --http-no-proxy option.
 * HttpProxyOptionHandler: Enclose hostname with square brackets if hostname is
   IPv6 numeric address.

-------------------------------------------------------------------
Fri Oct 14 22:08:37 UTC 2011 - pascal.bleser@opensuse.org

- update to 1.13.0:
  * fixes libgcrypt version check error
  * now returns error response if RPC request parameter has wrong type
  * on >= 12.1, aria2 uses libnettle and libgmp instead of libgcrypt
  * added --piece-length option: sets a piece length for HTTP/FTP downloads; is
    the boundary when aria2 splits a file; all splits occur at multiple of this
    length; will be ignored in BitTorrent downloads and if Metalink file
    contains piece hashes
 * cleanup log message for binding server socket
 * recognize tab as white space before option in -i list
 * added geom parameter to --stream-piece-selector option: if 'geom' is given,
   at the beginning aria2 selects piece which has minimum index like 'inorder',
   but it exponentially increasingly keeps space from previously selected
   piece; will reduce the number of establishing connection and at the same
   time it will download the beginning part of the file first; useful to view
   movie while downloading it
 * added completedLength response key in aria2.getFiles RPC method
 * added #checksum help tag.
 * added --checksum and --checksum=TYPE=DIGEST option: sets checksum; TYPE is
   hash type; supported hash type is listed in "Hash Algorithms" in "aria2c
   -v"; DIGEST is hex digest; applies only to HTTP(S)/FTP downloads
 * added --hash-check-only opiton: if true is given, after hash check using
   --check-integrity option, abort download whether or not download is
   complete; default is false
 * added --download-result option: changes the way "Download Results" is formatted
 * added --rpc-allow-origin-all option: adds Access-Control-Allow-Origin header
   field with value '*' to the RPC response
 * ignore --out option supplied in command-line if -i is used; can still use
   out option in the text file specified in -i
 * disable SSLv2 by default and optimize memory usage
 * added libnettle and libgmp support

-------------------------------------------------------------------
Sat Sep 17 12:13:00 UTC 2011 - jengelh@medozas.de

- Remove redundant tags/sections from specfile

-------------------------------------------------------------------
Wed Aug 03 23:27:09 UTC 2011 - pascal.bleser@opensuse.org

- update to 1.12.1:
  * adds RFC 6249 Metalink/HTTP support
  * current implementation only uses rel=duplicate links
  * --enable-direct-io option was deprecated because of performance issue
  * since recent GnuTLS uses libnettle as default instead of libgcrypt, this
    release added initialization code for libgcrypt
  * Initialize libgcrypt.  We relied initialization of libgcrypt on
    gnutls_global_init(), but recent change in gnutls, which changes default
    crypto backend from libgcrypt to libnettle, leaves libgcrypt uninitialized
    if it uses libnettle as backend (and this is likely because libnettle is
    chosen by default). To fix this issue, we simply initialize libgcrypt on our
    own.
  * Throw exception with error message if gnutls_global_init() failed.
  * Implemented Metalink/HTTP. Link header fields from first Metalink server is
    utilized as described in rfc6249. We only set digest from Digest header
    field to DownloadContext only when PieceStorage is not initialized(in other
    words, before file size is known). After PieceStorage is initialized, Digest
    header field is used to check the value is the same in digest in
    DownloadContext. Current implementation only handles rel=duplicate.
  * Remove Metalink content-type after first server response.
  * Updated Russian translation of aria2 man page.
  * Fixed the bug due to dangling pointers in RequestGroup.
  * Added log message to clarify error for BitTorrent server socket.
  * Added #deprecated help tag.
  * Removed deprecated options: --enable-xml-rpc, --xml-rpc-listen-all,
    --xml-rpc-listen-port, --xml-rpc-max-request-size, --xml-rpc-user,
    --xml-rpc-passwd.
  * Removed use of O_DIRECT because of performance issue.  Deprecated
    --enable-direct-io option.
  * Increased the maximum number of in-flight request in BitTorrent.
  * Added --log option to aria2rpc

-------------------------------------------------------------------
Thu Jun 30 21:52:54 UTC 2011 - pascal.bleser@opensuse.org

- update to 1.12.0:
  * Use ServerStat to find faster server. This is useful when several downloads
    were started in parallel, but one download is slow and the other downloads
    have completed. Then aria2 knows which servers are fast by the results of
    completed downloads, and check the available URIs of slow downloads to see
    faster server is available there. If so, use it instead of current slow one
    to make download faster.
  * Added Russian translation of man page and HTML manual.
  * Added aria2.getGlobalStat RPC method. It returns overall download/upload
    speed and the number of active/stopped/waiting downloads.
  * Added --pause option.  This option pauses download after added. This option
    is effective only when --enable-rpc=true is given. When --save-session
    option is used and there are paused downloads, they are saved with
    --pause=true so that it will become paused state when the session is
    recovered.
  * Abort aria2 if it could not setup any RPC server.
  * Added --truncate-console-readout option.  This option truncates console
    readout to fit in a single line. This is default. Give false value to this
    option to tell aria2 not to truncate console readout.
  * Cache and reuse RpcMethod objects.
  * Allowed missing params in system.multicall RPC method.
  * Added --stream-piece-selector option. This option specifies piece selection
    algorithm used in HTTP/FTP download. Piece means fixed length segment which
    is downloaded in parallel in segmented download. If 'default' is given,
    aria2 selects piece so that it reduces the number of establishing
    connection. This is reasonable default behaviour because establishing
    connection is an expensive operation.  If 'inorder' is given, aria2 selects
    piece which has minimum index. Index=0 means first of the file. This will
    be useful to view movie while downloading it. --enable-http-pipelining
    option may be useful to reduce reconnection overhead.  Please note that
    aria2 honors --min-split-size option, so it will be necessary to specify a
    reasonable value to --min-split-size option.
  * Removed unnecessary template parameter from std::make_pair call.
  * Only percent-encode non-printable ASCII chars(0x00-0x1f), non-ASCII
    chars(>0x7f), ' ', '"', '<' and '>' for URIs supplied by user and remote
    server(usually Location header field).
  * Don't throw exception if Z_BUF_ERROR is encountered in GZipEncoder. This
    fixed the bug that compressed RPC request failed.
  * Don't save removed download in --save-session text file. Now stat column of
    removed downloads in Download Results is 'RM' instead of INPR.

-------------------------------------------------------------------
Sun May 22 10:51:15 UTC 2011 - pascal.bleser@opensuse.org

- update to 1.11.2:
 * Updated Japanese, Spanish and Simplified Chinese translation
 * Eliminated few seconds delay when downloads stop or pause
 * Added --metalink-base-uri option.  --metalink-uri option specifies
   base URI to resolve relative URI in metalink file stored in local
   disk. If URI points to a directory, URI must end with '/'.
 * Fixed the bug that the message "Loaded cookies from ..." appears
   when loading cookies from that file failed.
 * Support relative URI in Metalink file.  If relative URI is found in
   Metalink file, aria2 resolves its full URI contatenating the URI
   from which Metalink file is retrieved and relative URI in Metalink
   file. This feature is not available if Metalink file in local disk
   is specified in command line.
 * Erase user and password specified in command-line from argv.  The
   user and password is masked with '*'.
 * If no data type tag is used in XML-RPC, treat the data as string.

- changes from 1.11.1:
 * Added --show-console-readout option. This option toggles
   appearance of console readout.

-------------------------------------------------------------------
Fri Mar 18 20:52:26 UTC 2011 - pascal.bleser@opensuse.org

- update to 1.11.0:
  * adds a JSON-RPC interface
  * 2 new options were added:
    + --retry-wait
    + --async-dns-server
  * fixes the bug that caused a segmentation fault when unpausing downloads in
  * some situations

-------------------------------------------------------------------
Thu Jan 20 01:34:05 UTC 2011 - pascal.bleser@opensuse.org

- split out bash completion support into aria2-bash-completion package
- aria2-bash-completion requires bash-completion to function properly

-------------------------------------------------------------------
Mon Jan 10 09:45:32 UTC 2011 - pascal.bleser@opensuse.org

- update to 1.10.9:
  * fixes the bug in which aria2 wrongly determines a peer as a seeder and
    drops connection in the seed state
  * some improvements and bug fixes in the BitTorrent implementation were made:
    + bump up DHT version number to 3
    + don't try legacy BitTorrent handshake when first connection attempt timed out
    + don't send announce_peer message with empty token in DHTPeerLookupTask;
      replace old node ID with new node ID when response message is received in
      DHTAbstractNodeLookupTask
    + drop old node from DHT routing table if node ID has changed
    + drop connection if client and peer are both seeders
    + fixed the bug that peer is marked as seeder whenever it sends extension
      handshake with metadata size

-------------------------------------------------------------------
Tue Dec 21 23:23:27 UTC 2010 - pascal.bleser@opensuse.org

- update to 1.10.8:
  * fixes compile error that occurs when the system does not have fallocate()
    but has posix_fallocate()

-------------------------------------------------------------------
Sun Dec  5 10:22:22 UTC 2010 - pascal.bleser@opensuse.org

- update to 1.10.7:
  * fixes the bug that causes a memory leak when parsing Metalink document
  * adds several exit status codes to help identify the cause of an error
  * the --max-connection-per-server option now works with Metalink
  * aria2 now passes the number of files and file path in addition to the GID
    to commands specified in the --on-download-* options
  * a bash_completion file for aria2c is now included in the distribution

-------------------------------------------------------------------
Tue Nov  2 00:00:30 UTC 2010 - pascal.bleser@opensuse.org

- update to 1.10.6:
  * fixes the bug that prevented downloading files larger than 4GB on 32-bit
    systems
  * fixes the bug that prevented the dht.dat file from being saved
  * improper use of the return value of vsnprintf was fixed, which caused
    segmentation fault when formatting strings more than 1024 characters long

-------------------------------------------------------------------
Fri Oct 22 07:30:22 UTC 2010 - pascal.bleser@opensuse.org

- update 1.10.5:
  * fixes the bug in which file allocation is enabled in HTTP even if
    --file-allocation=none is specified

-------------------------------------------------------------------
Tue Oct 12 14:18:34 UTC 2010 - pascal.bleser@opensuse.org

- update to 1.10.4:
  * fixes the bug in which aria2 hangs when the FTP server does not send the
    "226 Transfer Complete" message
  * fixes the bug in which the time used in file allocation is taken into
    account when calculating download speed
  * non UTF-8 filenames are now percent-encoded
  * the comments and name in the .torrent file in an XML-RPC response are also
    percent-encoded if they are not UTF-8
  * a warning message when CA certificates are not imported is not printed in
    the console; instead, it is shown when a certificate verification error
    actually occurs

-------------------------------------------------------------------
Sun Sep 19 11:04:12 UTC 2010 - jengelh@medozas.de

- use %_smp_mflags for build

-------------------------------------------------------------------
Wed Sep 15 17:48:02 UTC 2010 - pascal.bleser@opensuse.org

- update to 1.10.3:
  * adds the short option -x for the --max-connection-per-server option and -k
    for the --min-split-size option
  * adds the --max-download-result=NUM option: this option sets the maximum
    number of download results kept in memory, and the default value is 1000
  * --max-connection-per-server now accepts values up to 16
  * the "@" character is now allowed in a username embedded in a URI
  * fixes the bug in which aria2 reports an error and exits with non-zero
    status when a file is already downloaded and a checksum is available

- changes from 1.10.2:
  * fixes the bug that prevented HTTP redirect from working when multiple files
    were downloaded from the same host at the same time
  * for netrc, aria2 now performs a domain match if the machine name defined in
    .netrc starts with "."

-------------------------------------------------------------------
Sun Aug 29 16:26:42 UTC 2010 - pascal.bleser@opensuse.org

- update to 1.10.1:
  * adds IPv6 support for FTP, BitTorrent, and BitTorrent DHT
  * for FTP, EPSV and EPRT command support was added
  * enabling IPv6 DHT requires several new options
  * aria2 now listens on both IPv4 and IPv6 sockets for BitTorrent, its DHT and
    XML-RPC; aria2 uses the same port for both IPv4 and IPv6
  * the ability to add and remove BitTorrent tracker announce URIs was added
  * the link error for FallocFileAllocationIterator was fixed

-------------------------------------------------------------------
Mon Jul 19 19:17:47 UTC 2010 - pascal.bleser@opensuse.org

- update to 1.10.0:
  * adds an option to limit the number of connections to the same host in each
    download
  * aria2 now chooses the server which is least used in the aria2c instance
  * adds Chromium cookie support
  * adds HTTP only conditional download support in which a file is downloaded
    only when the local file is older than the remote file
  * aria2 now can handle %2F in FTP URI properly
  * the HTTP/1.1 chunked decoder was fixed
  * aria2 uses fallocate by default if it is usable

-------------------------------------------------------------------
Mon Jun 28 20:04:24 UTC 2010 - pascal.bleser@opensuse.org

- update to 1.9.5:
  * fixes the bug that caused corrupted files
  * also fixes an assertion error in the DefaultPeerStorage class
  * aria2 no longer resets the referer to the empty string on redirect
  * the log and log-level options can be used in the aria2.changeGlobalOption
    XML-RPC method: this means you can dynamically start or stop logging and
    change log file and log level

-------------------------------------------------------------------
Sun Jun  6 07:54:47 UTC 2010 - pascal.bleser@opensuse.org

- update to 1.9.4:
  * fixes the bug where connection reuse on FTP did not work if the
    FTP server changed the root directory based on account
  * fixes the bug where reading a Metalink document from a pipe
    (the -M- option) does not work when aria2 is built with expat
    or old libxml2 (2.7.6 or earlier)
  * now aria2 does not emit an error if the given Metalink document
    is empty (no file element)
  * the response of the aria2.tellStopped XML-RPC method now has
    more information: totalLength, completedLength, uploadLength,
    bitfield, and so on.

-------------------------------------------------------------------
Sun May  9 12:10:21 UTC 2010 - pascal.bleser@opensuse.org

- update to 1.9.3:
  * fixes the bug in which aria2 cuts a filename after a ";"
    character if the filename in the Content-Disposition header
    includes a ";" character
  * fixes the bug in which the name attribute of the file element
    in a Metalink file is not properly sanitized

-------------------------------------------------------------------
Wed Apr 28 19:19:06 UTC 2010 - pascal.bleser@opensuse.org

- update to 1.9.2:
  * adds poll() support for socket event notification to eliminate
    the limitation to 1024 file descriptors of the select() call
  * fixes the bug in which the aria2.unpause and aria2.unpauseAll
    XML-RPC methods fail when -s1 is given in a command-line
    argument

-------------------------------------------------------------------
Wed Apr 14 21:50:25 UTC 2010 - pascal.bleser@opensuse.org

- update to 1.9.1:
  * adds ability to save unfinished downloads as a text file: the
    file can be read with the -i option on restart
  * adds the ability to download files from scratch when 'resume'
    is not supported by the remote server
  * new XML-RPC methods were added: aria2.pause, aria2.unpause,
    aria2.shutdown, and their families
  * the new exit status code '8' was added

-------------------------------------------------------------------
Sun Apr  4 14:11:53 UTC 2010 - crrodriguez@opensuse.org

- enable c-ares support in 11.3 only.

-------------------------------------------------------------------
Fri Mar 12 20:33:21 UTC 2010 - poeml@cmdline.net

- update to 1.9.0:
  This release adds Metalink4 support and BitTorrent Local Peer
  Discovery.  aria2.changeUri XML-RPC method was added. It enables you
  to add/remove URIs to existing downloads dynamically.  The user and
  password for proxy server now can be specified in command-line
  separately.  We refactored the code based on profiler results, so
  aria2 now runs more efficiently than ever. Russian and Simplified
  Chinese translation were updated.
  * Resurrected --http-proxy-user and --http-proxy-passwd option.
    Added --https-proxy-user, --https-proxy-passwd, --ftp-proxy-user,
    --ftp-proxy-passwd, --all-proxy-user, --all-proxy-passwd option.
  * Updated Russian and Simplified Chinese translation.
  * Added --reuse-uri option. This option has existed quite long, but
    been hidden.
  * Fixed the bug that filename is percent encoded where it must be
    percent decoded in sendMdtm().
  * Added getServers XML-RPC method. It returns currently connected
    HTTP(S)/FTP server and download speed, etc.
  * Added 'status' key to the response of getUri XML-RPC method.
  * Added changeUri XML-RPC method.  This method removes/adds URIs
    dynamically.
  * Replaced null or control characters in file path with '_'.  For
    MinGW32 build, additional characters which is not allowed in
    Windows kernel are also replaced. util::detectDirTraversal() now
    returns true if given string contains null or control characters.
  * Discard torrent file if path data in it contains directory
    traversal directives.  Discard metalink:file element in Metalink3
    format if its name attribute contains directory traversal
    directives.  Ignore name attribute of metalink:signature element in
    Metalink3 format if it contains directory traversal directives.
  * Added Metalink4 support. Files with same metaurl are
    grouped and downloaded in one RequestGroup.
  * Added --bt-lpd-interface option to specify the interface to use for
    Local Peer Discovery. LpdMessageDispatcher object now has its own
    socket. LpdMessageReceiver's socket is binded to multicast address
    to only receive multicast packets.
  * Added Local Peer Discovery. It is disabled by default. Use
    --bt-enable-lpd to enable the function.

-------------------------------------------------------------------
Mon Feb 22 12:54:15 CET 2010 - meissner@suse.de

- run make check
- fixed macro usage to work with the macros not defined

-------------------------------------------------------------------
Sun Feb 21 19:15:03 UTC 2010 - pascal.bleser@opensuse.org

- update to 1.8.3:
  * fixes the bug in which --file-allocation=falloc didn't work
    with single file download
  * fixes the bug in which the return value of aria2 was unreliable
    if an error occurred before download begins
  * when custom request headers are specified by the --header
    option, they now override built-in headers if they have same
    name

-------------------------------------------------------------------
Thu Feb  4 00:01:15 UTC 2010 - pascal.bleser@opensuse.org

- update to 1.8.2:
  * fixes the bug that causes segmentation fault with the
    --max-file-not-found option involved
  * now aria2 can handle a redirected URI which is not properly
    percent encoded
  * the 'bittorrent' key was added to the response of the
    tellStatus XML-RPC method; the associated value of the key is
    a struct and contains data retrieved from a .torrent file, such
    as name, announce-list, comment, etc

-------------------------------------------------------------------
Sat Jan 23 20:16:44 UTC 2010 - pascal.bleser@opensuse.org

- update to 1.8.1:
  * fixes the bug that causes a segmentation fault if unknown
    options exist in the aria2.conf file and the user cannot
    include an empty line in aria2.conf
  * the following new command line options were added:
    + --http-no-cache
    + --bt-metadata-only
    + --human-readable
  * the aria2.getSessionInfo XML-RPC method was added
  * the "dir" and "files" keys were added to the response struct
    of the aria2.tellStatus XML-RPC method
  * aria2 now returns a gzip compressed XML-RPC response if the
    XML-RPC client accepts gzip content encoding

-------------------------------------------------------------------
Sun Dec 27 18:30:07 UTC 2009 - pascal.bleser@opensuse.org

- update to 1.8.0:
  * new XML-RPC methods were added:
    + aria2.getOption
    + aria2.getGetGlobalOption
    + aria2.changePosition
    + aria2.tellStopped
    + system.multicall
  * adds --bt-save-metadata option: saves metadata as a .torrent
    file; has effect only when a BitTorrent Magnet URI is used

-------------------------------------------------------------------
Mon Dec 14 09:44:28 UTC 2009 - pascal.bleser@opensuse.org

- update to 1.7.2:
  * fixes bug in which aria2 listens to the wrong port in
    BitTorrent/FTP downloads when the --interface option is used
  * if --metalink-file='-' is given, aria2 now reads the Metalink
    file from stdin
  * the magnet URI is printed in the output of the -S option
  * DHT is now enabled by default; DHT doesn't start when aria2 is
    only handling HTTP and FTP downloads; when the first torrent
    download begins, aria2 initiates DHT functionality; after that,
    DHT runs until aria2 exits

- enable sqlite3 support

-------------------------------------------------------------------
Mon Dec  7 22:37:36 UTC 2009 - pascal.bleser@opensuse.org

- update to 1.7.1:
  * fixed a bug with --bt-prioritize-piece=tail not working

-------------------------------------------------------------------
Sun Dec  6 20:01:00 UTC 2009 - pascal.bleser@opensuse.org

- update to 1.7.0:
  * adds BitTorrent Magnet URI support
  * add ability to bind to a particular interface
  * add disabling IPv6
  * add prioritizing pieces in BitTorrent download
  * the --http-auth-scheme option was removed since it is useless
  * updated Russian, Ukrainian, German, and French translations

-------------------------------------------------------------------
Tue Nov  3 19:09:05 UTC 2009 - coolo@novell.com

- updated patches to apply with fuzz=0

-------------------------------------------------------------------
Mon Nov  2 17:06:28 UTC 2009 - pascal.bleser@opensuse.org

- update to 1.6.3:
  * fixes reported bugs
  * updates translations

-------------------------------------------------------------------
Mon Nov  2 09:01:29 UTC 2009 - lnussel@suse.de

- fix format string problem (bnc#547318, CVE-2009-3617)

-------------------------------------------------------------------
Sat Oct 10 19:27:39 UTC 2009 - pascal.bleser@opensuse.org

- update to 1.6.2:
  * fixes a segmentation fault which occurred if the URI to
    download contains a printf format string and logging is enabled
  * the Ukrainian translation was updated

-------------------------------------------------------------------
Thu Oct  8 22:13:35 UTC 2009 - pascal.bleser@opensuse.org

- update to 1.6.1:
  * fixes a memory leak in HTTP/FTP downloading
  * fixes a bug where the option values changed by XML-RPC
    changeOption and changeGlobalOption methods are cleared
  * now User-agent and Peer ID include version numbers
  * Simplified Chinese translations have been updated

- changes from 1.6.0:
  * changes the default behavior of XML-RPC server: now it listens
    only on the local loopback interface by default for security
    reasons; if you want to connect to aria2c from remote hosts,
    use the --xml-rpc-listen-all option
  * the XML-RPC client sample scripts written in Ruby are now
    included in the archive under the doc/xmlrpc directory
  * the help category tags are now start "#" to distinguish them
    from keyword search
  * the --retry-wait option was removed because it doesn't work
    properly under the architecture
  * Bulgarian, Russian, Slovak, and Japanese translations have
    been updated

-------------------------------------------------------------------
Sat Aug 22 03:22:12 CEST 2009 - poeml@suse.de

- update to 1.5.2:
  This release fixes the bug that when the first attempt to establishing
  connection fails, aria2 don't try to connect another address and a
  download immediately fails.  -S output was enhanced: exact file size
  is now printed. For -S with torrent file, meta data such as comment,
  comment.utf-8, created by and creation date are now printed. Ukrainian
  and Russian translations were updated.
  See also http://bugzilla.novell.com/show_bug.cgi?id=532575.

-------------------------------------------------------------------
Mon Aug 17 16:04:40 CEST 2009 - poeml@suse.de

- remove obsolete patch aria2-large_ftp.patch

-------------------------------------------------------------------
Sun Jul 26 21:18:35 CEST 2009 - pascal.bleser@opensuse.org

- update to 1.5.1:
  * fixes a linker error in unit test code on 32-bit systems
  * file I/O error handling was written

-------------------------------------------------------------------
Sat Jul 18 19:00:07 CEST 2009 - pascal.bleser@opensuse.org

- update to 1.5.0:
  * adds Web seeding support for multi-file torrents
  * a --bt-stop-timeout option was added
  * aria2 now tries all resolved addresses to connect to remote HTTP(S)/FTP
    servers until it is connected
  * for XML-RPC, two new methods were added: aria2.tellWaiting and
    aria2.getVersion
  * --use-head is now disabled by default since the HEAD request causes
    problems with some Web sites
  * the Russian, Italian, Danish, Bulgarian, Japanese, and Ukrainian
    translations were updated

-------------------------------------------------------------------
Thu Jun 25 19:02:54 CEST 2009 - poeml@suse.de

- remove --without-libares from the configure options, which isn't
  recognized (anymore). There's --without-libcares, instead, which
  is already in use.

-------------------------------------------------------------------
Sun Jun  7 22:37:03 CEST 2009 - pascal.bleser@opensuse.org

- update to 1.4.1:
  * the aria2.tellStatus XML-RPC method now returns "uploadLength" and
    "numSeeders"
  * the Ukrainian translation was updated

-------------------------------------------------------------------
Sun May 31 21:33:33 CEST 2009 - pascal.bleser@opensuse.org

- update to 1.4.0:
  * adds an XML-RPC interface: the current XML-RPC API allows users to add
    HTTP(S)/FTP/torrent/Metalink download and change options dynamically: the
    APIs such as reporting download progress, file paths, URIs, and peer
    information are also available
  * adds the ability to run a command when a download is started/stopped
  * adds the ability to save cookies
  * the console readout was slightly updated and now includes the number of
    seeders the client has connected to
  * a Slovak translation was added
  * ukrainian and Brazilian Portuguese translation were updated

-------------------------------------------------------------------
Fri May  8 17:56:07 CEST 2009 - pascal.bleser@opensuse.org

- update to 1.3.3:
  * fixes the bug in which the --check-integrity option doesn't
    work properly if a file including the last piece is missing
  * the internal receive buffer was increased for FTP in order to
    receive big banners
  * the Ukrainian, Russian, and Simplified Chinese translations
    were updated

-------------------------------------------------------------------
Fri May  1 00:00:22 CEST 2009 - pascal.bleser@opensuse.org

- added patch by Rudi Oertel to avoid crashes with FTP banner sizes
  larget than 4kb (now handles 64kb), sent upstream:
  https://sourceforge.net/tracker/?func=detail&aid=2784659&group_id=159897&atid=813675

-------------------------------------------------------------------
Tue Apr 28 23:24:00 CEST 2009 - pascal.bleser@opensuse.org

- update to 1.3.2:
  * fixes the bug that prevents certain BitTorrent downloads from
    finishing
  * fixes a possible segmentation fault when gzip decoding is
    involved
  * fixes an infinite loop bug if the last "0" chunk-size marker is
    not received in chunked encoding transfer
  * aria2 now supports Web seeding (HTTP seeding) for a single file
    torrent
  * the Ukrainian translation was updated

-------------------------------------------------------------------
Mon Apr 13 02:14:12 CEST 2009 - pascal.bleser@opensuse.org

- update to 1.3.1:
  * fixes a bug where aria2 incorrectly determined that the
    specified share ratio was reached because of miscalculation of
    upload bytes
  * fixes a bug where the upload limit exceeded the value specified
    in the --seed-ratio option depending on the timing of the
    execution of SeedCheckCommand

-------------------------------------------------------------------
Wed Apr  1 19:53:05 CEST 2009 - pascal.bleser@opensuse.org

- update to 1.3.0:
  * performance optimizations
  * adds the ability to specify the output filenames in BitTorrent
    downloads
  * adds the option to limit overall download speed
  * adds a dry run mode
  * adds the file allocation mode 'falloc'
  * the -i list option can now take new options: select-file and
    index-out
  * the default behavior of sending HTTP Authorization header is
    reverted back to version 1.1.2 style
  * you can now seed read-only files in BitTorrent
  * Indonesian, Russian, Italian, Ukrainian, Simplified Chinese,
    Japanese, Spanish, and Norwegian Nynorsk translations were
    updated

-------------------------------------------------------------------
Fri Mar  6 16:56:02 CET 2009 - poeml@suse.de

- add patch for failing download when the adaptive URI selector is
  used (https://sourceforge.net/support/tracker.php?aid=2666026)

-------------------------------------------------------------------
Mon Feb 16 19:38:32 CET 2009 - poeml@suse.de

- update to 1.2.0 release
  The list of changes is mainly as given below, plus bugfixes.

-------------------------------------------------------------------
Wed Feb 11 19:16:08 CET 2009 - poeml@suse.de

- update to beta release 1.2.0b+20090210:
  This release adds the AdaptiveURISelector from Mandriva developers and
  changes the default value of --proxy-method option from 'tunnel' to
  'get'. The several BitTorrent options were added: limiting the number
  of peers, choosing port randomly from specified range, a toggle to
  seed after successful hash check and specifying IP address to report
  to a tracker. Hash checking is now done sequentially rather than
  simultaneously.  HTTP Authorization was also refined so that now
  authorization header is sent to the server only when it is
  requested(there are some exceptions, see Changes below). aria2 now
  returns exit code depending on the last error. All exit codes are
  documented in man page.  This release also adds experimental built-in
  HTTP server which provides the current download progress in plain
  html.

-------------------------------------------------------------------
Mon Dec 29 21:45:42 CET 2008 - pascal.bleser@opensuse.org

- update to 1.1.2:
  + fixes a bug where BitTorrent download didn't finish when a
    REJECT message was received before a CHOKE message
  + the --use-head option was added to toggle whether the HEAD
    method should be used in the first HTTP request
  + to use GET method as the first request, give --use-head=false
    to aria2c

- changes from 1.1.1:
  + fixes the bug where --summary-interval=0 didn't work

-------------------------------------------------------------------
Tue Dec 23 21:46:11 CET 2008 - pascal.bleser@opensuse.org

- update to 1.1.0:
  + fixes many bugs such as a buggy HTTP pipelining implementation
    that leads to corrupted downloads, bad cookie handling, and
    sending of badly formed URIs to the tracker
  + the --max-overall-upload-limit option was added to control
    overall (not per torrent) upload speed
  + the gettext package name was changed from "aria2c" to "aria2":
    this changes the installation directory of the documents and
    the translation files (*.mo)

-------------------------------------------------------------------
Tue Nov 25 07:36:43 CET 2008 - pascal.bleser@opensuse.org

- update to 1.0.1:
 + fixes a bug that caused floating point exceptions when the -T
   option is used without URIs
 + now using The HEAD method to get size information from a Web
   server
 + Ukrainian and Norwegian Nynorsk translations were updated

-------------------------------------------------------------------
Tue Nov 18 23:46:03 CET 2008 - pascal.bleser@opensuse.org

- update to 1.0.0:
 + adds the ability to verify peers using given trusted CA
   certificates and client certificate authentication in HTTPS
 + adds the ability to form a persistent connection using a proxy
   and support for well-known environment variables for proxy
   settings were also added
 + fixes the bug that caused a segmentation fault during seeding
 + now users can specify output the filename and directory in the
   input file
 + the average download speed are now printed in Download results
 + the following options are now enabled by default: --ftp-pasv and
   --enable-direct-io

-------------------------------------------------------------------
Sun Oct 19 22:32:04 CEST 2008 - pascal.bleser@opensuse.org

- update to 0.16.2:
 + fixes the bug that caused aria2 to abort when it receives a
   BitTorrent request message that requests data larger than 16KiB
 + Serbian translation was added
 + Ukrainian translation was updated

-------------------------------------------------------------------
Wed Oct 15 02:18:03 CEST 2008 - poeml@suse.de

- Pascal's changes reviewed by me as required by Factory policy.

-------------------------------------------------------------------
Tue Oct 14 20:54:22 CEST 2008 - pascal.bleser@opensuse.org

- update to 0.16.1:
  + adds a --dht-file-path option to change the dht.dat file
  + adds an --auto-save-interval option to change the interval for
    saving a control file (*.aria2)
  + fixes the bug where the last byte in a URL was not encoded
  + Ukrainian, Vietnamese, and Traditional Chinese translations
    were added

-------------------------------------------------------------------
Mon Oct 13 20:56:40 CEST 2008 - poeml@suse.de

- Pascal's changes reviewed by me as required by Factory policy.

-------------------------------------------------------------------
Mon Oct  6 18:29:20 CEST 2008 - pascal.bleser@opensuse.org

- update to 0.16:
  + add Firefox3 Cookie support
  + add ability to select the fastest server(URI) using the
    download speed observed in the previous downloads
  + add ability to get a timestamp from a remote server and apply
    it to a local file
  + add an option to specify the connect timeout
  + now uses netrc for HTTP

-------------------------------------------------------------------
Sat Sep  6 21:46:55 CEST 2008 - pascal.bleser@opensuse.org

- update to 0.15.3:
  + fixed chunk checksum validation cannot detect trailing garbage
    data; BUG#2074141
  + made files whose name ends with ".gz", ".tgz" not inflated by
    Content Encoding Decoder
  + fixed infinite loop bug in FTP when SIZE command failed
  + contact tracker frequently when the number of connections are
    0 and is not finished yet
  + added -lrt to LIBCARES_LIBS if -lrt is needed to link program
    with -lcares
  + if an error occurred with a URI, remove identical URI from
    remaining URI list
  + added Turkish translation
  + updated German and Russian translations
- dropped patch8 gzip_in_metalink.patch, merged upstream

-------------------------------------------------------------------
Mon Sep  1 22:05:58 CEST 2008 - poeml@suse.de

- add patch r679(stable-0.15 branch)
  fixes segmentation fault when Metalink file contains gzipped
  file and its filesize is provided.

-------------------------------------------------------------------
Fri Aug 15 22:21:44 CEST 2008 - pascal.bleser@opensuse.org

- update to 0.15.2:
  + fixed memory leak
  + removed max chunk size check:
    http://sourceforge.net/tracker/index.php?func=detail&aid=2040169&group_id=159897&atid=813673
  + fixed unmatched malloc/free
  + now aria2 uses name attribute in Metalink as local filename
    in BitTorrent downloads:
    http://sourceforge.net/tracker/index.php?func=detail&aid=2033999&group_id=159897&atid=813673
  + fixed occasional assertion failure in PieceSegment
  + fixed man page: --follow-bittorrent should be --follow-torrent
  + added Danish and Greek translations
  + updated Catalan, Norwegian Nynorsk and Spanish translations

-------------------------------------------------------------------
Fri Aug 15 16:23:43 CEST 2008 - poeml@suse.de

- remove hardcoded %debug_package
- expand tabs in spec file header
- indent some macros at the top which break the internal
  check_if_valid_source_dir tool

-------------------------------------------------------------------
Fri Aug 15 14:08:52 CEST 2008 - poeml@suse.de

- initial submission to openSUSE Factory. 
  Previous changelog:

| * Mon Aug  4 2008 Peter Poeml <poeml@suse.de> 0.15.1+1
  | - new upstream version 0.15.1+1:
  |   * Fixed the bug that causes segmentaion fault when resuming download
  |     using metalink without size tag. Reproducible only using HTTP URI.
  | - a buglet in the configure script causes this directive to cause the
  |   opposite, so comment out the "--enable-metalink"
  | * Thu Jul 31 2008 Pascal Bleser <guru@unixtech.be> 0.15.1
  | - new upstream version:
  |   * fixes broken gzip inflation
  |   * lowers CPU usage
  |   * other minor fixes
  |   * Bulgarian and French translations were updated
  | * Wed Jul 23 2008 Pascal Bleser <guru@unixtech.be> 0.15.0
  | - new upstream version:
  |   * adds HTTP gzip content encoding support
  |   * adds the ability to save a signature in Metalink as a file
  |   * adds the option to skip hash checking in BitTorrent seeding
  |   * adds support for FTP servers that don't support the SIZE/REST command
  |   * a Bulgarian translation was added
  | * Sat Jun 21 2008 Pascal Bleser <guru@unixtech.be> 0.14.0
  | - new upstream version:
  |   * adds epoll support for Linux
  |   * adds the ability to limit the number of files to be opened to support more than 1024 files in a multi-file torrent
  |   * several bugs in BitTorrent downloads are fixed
  |   * from this release, aria2 downloads a file using 5 connections in HTTP/FTP by default, and the behavior of the -s option has changed
  | * Sun May 25 2008 Pascal Bleser <guru@unixtech.be> 0.13.2
  | - new upstream version:
  |   * adds the ability to specify any number of URIs, torrents, and metalinks in a command-line
  |   * adds option to set user-defined HTTP headers
  |   * adds support for transparent Metalink and connection reuse for HTTP/FTP downloads
  |   * adds output at given interval of a download progress summary
  |   * adds option to suppress any console output
  | * Tue May 20 2008 Pascal Bleser <guru@unixtech.be> 0.13.1+2
  | - new upstream version
  | * Mon Apr 28 2008 Pascal Bleser <guru@unixtech.be> 0.13.1
  | - bumped up in-tree libxml2 to 2.6.32
  | * Sat Mar 15 2008 Pascal Bleser <guru@unixtech.be> 0.13.1
  | - new upstream version
  | * Sat Mar  1 2008 Pascal Bleser <guru@unixtech.be> 0.13.0
  | - new upstream version
  | * Fri Feb 15 2008 Pascal Bleser <guru@unixtech.be> 0.12.1+1
  | - new upstream version
  | * Tue Feb 12 2008 Pascal Bleser <guru@unixtech.be> 0.12.1
  | - bumped intree libxml2 to latest 2.6.31
  | - new upstream version
  | * Sun Dec 30 2007 Pascal Bleser <guru@unixtech.be> 0.12.0
  | - fixed build on Factory
  | * Sun Dec  9 2007 Pascal Bleser <guru@unixtech.be> 0.12.0
  | - new upstream version
  | * Sat Nov 17 2007 Pascal Bleser <guru@unixtech.be> 0.11.5
  | - new upstream version
  | * Sun Oct 28 2007 Pascal Bleser <guru@unixtech.be> 0.11.4
  | - don't use intree libxml2 on openSUSE 10.3, as 10.3 ships a sufficiently recent libxml2-2.6.30
  | - new upstream version
  | * Mon Sep 10 2007 Pascal Bleser <guru@unixtech.be> 0.11.3
  | - new upstream version
  | * Sat Sep  8 2007 Pascal Bleser <guru@unixtech.be> 0.11.2
  | - moved to openSUSE Build Service
  | * Fri Aug 24 2007 Pascal Bleser <guru@unixtech.be> 0.11.2-2
  | - built against c-ares 1.4.0
  | - bumped in-tree libxml2 to 2.6.30
  | * Thu Aug  9 2007 Pascal Bleser <guru@unixtech.be> 0.11.2-1
  | - bumped in-tree libxml2 to 2.6.29
  | - new upstream version
  | * Tue Jun 12 2007 Pascal Bleser <guru@unixtech.be> 0.11.0-1
  | - new upstream version
  | * Fri Apr 27 2007 Pascal Bleser <guru@unixtech.be> 0.10.2.1-1
  | - new upstream version
  | * Wed Apr 18 2007 Pascal Bleser <guru@unixtech.be> 0.10.2-2
  | - update in-tree libxml2 version to 2.6.28
  | * Wed Mar 28 2007 Pascal Bleser <guru@unixtech.be> 0.10.2-1
  | - new upstream version
  | - CHANGES: adds netrc support
  | - CHANGES: adds user configuration file support
  | - CHANGES: adds the ability to change user-agent
  | - CHANGES: adds the ability to resume downloading a partially downloaded file by other programs that download files sequentially from the beginning
  | - CHANGES: numerous improvements and bugfixes have also been made
  | * Wed Feb  7 2007 Pascal Bleser <guru@unixtech.be> 0.10.1-1
  | - new upstream version
  | * Fri Feb  2 2007 Pascal Bleser <guru@unixtech.be> 0.10.0.1-1
  | - new upstream version
  | * Sun Jan 28 2007 Pascal Bleser <guru@unixtech.be> 0.10.0-1
  | - bundle libxml2 on SUSE < 10.0 to avoid forcing an upgrade that breaks stuff
  | - new upstream version
  | * Thu Dec  7 2006 Pascal Bleser <guru@unixtech.be> 0.9.0-2
  | - statically link libcares
  | * Wed Nov  8 2006 Pascal Bleser <guru@unixtech.be> 0.9.0-1
  | - new upstream version
  | * Sun Oct  1 2006 Pascal Bleser <guru@unixtech.be> 0.8.1-1
  | - new upstream version
  | * Sun Sep 24 2006 Pascal Bleser <guru@unixtech.be> 0.8.0-1
  | - new upstream version
  | * Tue Aug 29 2006 Pascal Bleser <guru@unixtech.be> 0.7.3-1
  | - added missing buildrequires for libgcrypt-devel
  | - new upstream version
  | * Mon Aug 21 2006 Pascal Bleser <guru@unixtech.be> 0.7.2-1
  | - new upstream version
  | * Mon Aug 14 2006 Pascal Bleser <guru@unixtech.be> 0.7.1-1
  | - add buildrequiers for c-ares[-devel] to support async DNS
  | - new upstream version
  | * Tue Aug  8 2006 Pascal Bleser <guru@unixtech.be> 0.7.0-1
  | - new upstream version
  | * Fri Jul 21 2006 Pascal Bleser <guru@unixtech.be> 0.6.0-1
  | - new upstream version
  | * Sun Jun 25 2006 Pascal Bleser <guru@unixtech.be> 0.5.2-1
  | - new upstream version
  | * Sun Jun 18 2006 Pascal Bleser <guru@unixtech.be> 0.5.1-1
  | - dropped patch, has been sent and merged upstream
  | - new upstream version
  | * Fri May 26 2006 Pascal Bleser <guru@unixtech.be> 0.5.0-1
  | - new upstream version
  | * Sun Apr 30 2006 Pascal Bleser <guru@unixtech.be> 0.4.1-1
  | - moved autoreconf and configure to build section
  | - new upstream version
  | * Fri Apr 21 2006 Pascal Bleser <guru@unixtech.be> 0.4.0-1
  | - added binary stripping for SUSE < 9.3
  | - new upstream version
  | - removed Distribution and Packager, injected by rpmmacros
  | * Sat Apr  1 2006 Pascal Bleser <guru@unixtech.be> 0.3.2-1
  | - added gnutls support, used by default, rebuild with --with openssl to use openssl instead
  | - new upstream version
  | * Fri Mar 24 2006 Pascal Bleser <guru@unixtech.be> 0.3.1-1
  | - new package

Places

File aria2.changes of Package aria2 (Revision 5b5e6bf9f238c847806df425f0299550)

Places