File rsyslog.changes of Package rsyslog

Overview Repositories Revisions Requests Users Attributes Meta

File rsyslog.changes of Package rsyslog (Revision 9f84e3688e25c249bf4f4f5e10202b89)

Currently displaying revision 9f84e3688e25c249bf4f4f5e10202b89 , Show latest

-------------------------------------------------------------------
Fri Aug 19 13:04:45 UTC 2011 - mrueckert@suse.com

- Update to 5.8.4 [V5-stable]
  - bugfix: potential misadressing in property replacer
  - bugfix: memcpy overflow can occur in allowed sender checkig if
    a name is resolved to IPv4-mapped-on-IPv6 address Found by
    Ismail Dönmez at suse
  - bugfix: potential misadressing in property replacer
  - bugfix: MSGID corruption in RFC5424 parser under some
    circumstances closes:
    http://bugzilla.adiscon.com/show_bug.cgi?id=275
- remove rsyslog-5.8.0-memcpy.patch:
  applied upstream
- fix build for older distros:
  only buildrequire systemd-devel for newer than 11.4, use systemd
  for the others

-------------------------------------------------------------------
Fri Aug 19 04:54:03 UTC 2011 - crrodriguez@opensuse.org

- Fix build with new gnutls

-------------------------------------------------------------------
Tue Aug  2 07:35:13 UTC 2011 - aj@suse.de

- Require systemd-devel to follow package split.

-------------------------------------------------------------------
Wed Jul 13 11:10:15 UTC 2011 - mrueckert@suse.com

- drop modules imtemplate and omtemplate, the 2 modules are base
  templates for people who want to develop their own modules.

-------------------------------------------------------------------
Tue Jul 12 13:35:54 UTC 2011 - mrueckert@suse.com

- enabled a few more modules which dont pull extra dependencies:
  impstats, pmcisconames, pmaixforwardedfrom, pmsnare, pmrfc3164sd,
  omruleset, mmsnmptrapd

-------------------------------------------------------------------
Tue Jul 12 13:11:04 UTC 2011 - mrueckert@suse.com

- guard the file list entry for rsyslog.service with
  if {with systemd}. Please keep the package working on older
  distros.

-------------------------------------------------------------------
Tue Jul 12 12:59:13 UTC 2011 - mrueckert@suse.com

- upstream asked to change the syntax in the default config files
  to the new syntax:
  old: *.* * # (write to all)
  new: *.* :omusrmsg:*

old: *.* $channel
  new: *.* :omfile:$channel

from what i can see we are only affected with:
  old: *.emerg *
  new: *.emerg :omusrmsg:*

-------------------------------------------------------------------
Tue Jul 12 12:52:58 UTC 2011 - mrueckert@suse.com

- Updated to 5.8.3  [V5-stable]
  - systemd support: set stdout/stderr to null - thx to Lennart for
    the patch
  - added support for the ":omusrmsg:" syntax in configuring user
    messages
  - added support for the ":omfile:" syntax in configuring user
    messages Note: previous outchannel syntax will generate a
    warning message. This may be surprising to some users, but it
    is quite urgent to alert them of the new syntax as v6 can no
    longer support the previous one.

-------------------------------------------------------------------
Tue Jun 21 13:50:42 UTC 2011 - mt@suse.de

- Updated to 5.8.2 [V5-stable] (bnc#701282) a maintenance release,
  containing only stability fixes:
  - bugfix: problems in failover action handling
    closes: http://bugzilla.adiscon.com/show_bug.cgi?id=270
    closes: http://bugzilla.adiscon.com/show_bug.cgi?id=254
  - bugfix: mutex was invalidly left unlocked during action processing
    At least one case where this can occur is during thread shutdown,
    which may be initiated by lower activity. In most cases, this is
    quite unlikely to happen. However, if it does, data structures may be
    corrupted which could lead to fatal failure and segfault. I detected
    this via a testbench test, not a user report. But I assume that some
    users may have had unreproducable aborts that were cause by this bug.
  - bugfix: memory leak in imtcp & subsystems under some circumstances
    This leak is tied to error conditions which lead to incorrect cleanup
    of some data structures. [backport from v6]
  - bugfix/improvement:$WorkDirectory now gracefully handles trailing
    slashes

-------------------------------------------------------------------
Tue May 31 12:14:59 UTC 2011 - aj@suse.de

- Add systemd service file back (bnc#696963).

-------------------------------------------------------------------
Fri May 27 07:53:38 UTC 2011 - mt@suse.de

- Removed touch of obsolete /var/log/boot.log from spec post.

-------------------------------------------------------------------
Thu May 19 15:43:28 UTC 2011 - mrueckert@suse.de

- update to 5.8.1
  - bugfix: invalid processing in QUEUE_FULL condition If the the
    multi-submit interface was used and a QUEUE_FULL condition
    occured, the failed message was properly destructed. However,
    the rest of the input batch, if it existed, was not processed.
    So this lead to potential loss of messages and a memory leak.
    The potential loss of messages was IMHO minor, because they
    would have been dropped in most cases due to the queue
    remaining full, but very few lucky ones from the batch may have
    made it. Anyhow, this has now been changed so that the rest of
    the batch is properly tried to be enqueued and, if not
    possible, destructed.
  - new module mmsnmptrapd, a sample message modification module
    This can be useful to reformat snmptrapd messages and also
    serves as a sample for how to write message modification
    modules using the output module interface. Note that we
    introduced this new functionality directly into the stable
    release, as it does not modify the core and as such cannot have
    any side-effects if it is not used (and thus the risk is solely
    on users requiring that functionality).
  - bugfix: rate-limiting inside imuxsock did not work 100% correct
    reason was that a global config variable was invalidly accessed
    where a listener variable should have been used.  Also
    performance-improved the case when rate limiting is turned off
    (this is a very unintrusive change, thus done directly to the
    stable version).
  - bugfix: $myhostname not available in RainerScript (and no error
    message) closes:
    http://bugzilla.adiscon.com/show_bug.cgi?id=233
  - bugfix: memory and file descriptor leak in stream processing
    Leaks could occur under some circumstances if the file stream
    handler errored out during the open call. Among others, this
    could cause very big memory leaks if there were a problem with
    unreadable disk queue files. In regard to the memory leak, this
    closes: http://bugzilla.adiscon.com/show_bug.cgi?id=256
  - bugfix: doc for impstats had wrong config statements also,
    config statements were named a bit inconsistent, resolved that
    problem by introducing an alias and only documenting the
    consistent statements Thanks to Marcin for bringing up this
    problem.
  - bugfix: IPv6-address could not be specified in omrelp this was
    due to improper parsing of ":" closes:
    http://bugzilla.adiscon.com/show_bug.cgi?id=250
  - bugfix: TCP connection invalidly aborted when messages needed
    to be discarded (due to QUEUE_FULL or similar problem)
  - bugfix: $LocalHostName was not honored under all circumstances
    closes: http://bugzilla.adiscon.com/show_bug.cgi?id=258
  - bugfix(minor): improper template function call in syslogd.c

-------------------------------------------------------------------
Fri Apr 29 11:38:40 UTC 2011 - idoenmez@novell.com

- Add rsyslog-5.6.5-memcpy.patch: fix overflowing memcpy call in
  runtime/net.c

-------------------------------------------------------------------
Wed Apr 27 16:19:31 UTC 2011 - mrueckert@suse.de

- move most of the additional requirements and subpackages into
  conditionals so we can switch them on and off by more easily.

-------------------------------------------------------------------
Tue Apr 26 12:30:17 UTC 2011 - mt@suse.de

- Dropped obsolete rsyslog-systemd-integration.bnc656104.diff

-------------------------------------------------------------------
Tue Apr 26 12:20:16 UTC 2011 - mrueckert@suse.de

- dont ship the systemd service file for now.

-------------------------------------------------------------------
Sun Apr 24 01:32:17 UTC 2011 - mrueckert@suse.de

- update to 5.8.0 (v5-tsable)
  This is the new v5-stable branch, importing all feature from the
  5.7.x versions. To see what has changed in regard to the previous
  v5-stable, check the entries for 5.7.x in
  /usr/share/doc/packages/rsyslog/ChangeLog.

- bugfix: race condition in deferred name resolution
    closes: http://bugzilla.adiscon.com/show_bug.cgi?id=238
    Special thanks to Marcin for his persistence in helping to solve this
    bug.
  - bugfix: DA queue was never shutdown once it was started
    closes: http://bugzilla.adiscon.com/show_bug.cgi?id=241
- dropped patch rsyslog-deferred-dns-query-race.diff
  included in the release
- refreshed rsyslog-systemd-integration.bnc656104.diff:
  most of the patch went upstream just a small chunk left
- fixed the with_dbi conditional, it was using the build_with_relp.
- added a new conditional with_systemd and moved all the systemd
  specific things from suse_version >= 1140 to the with_systemd
  conditional. the patch line in the preamble should be
  unconditional.

-------------------------------------------------------------------
Fri Apr  8 13:24:34 UTC 2011 - mt@suse.de

- bugfix: race condition in deferred name resolution (id=238)
  from v5.8.0 candidate.

-------------------------------------------------------------------
Thu Mar 24 16:34:31 UTC 2011 - mt@suse.de

- Updated to 5.6.5 (v5-stable) with following bugfixes:
  * bugfix: failover did not work correctly if repeated msg
  reduction was on.
  affected directive: $ActionExecOnlyWhenPreviousIsSuspended on
  * bugfix: omlibdbi did not use password from rsyslog.conf
  closes: http://bugzilla.adiscon.com/show_bug.cgi?id=203
  * bugfix(kind of): tell users that config graph can currently
  not be generated
  closes: http://bugzilla.adiscon.com/show_bug.cgi?id=232
  * bugfix: discard action did not work under some circumstances
  fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=217
  (bnc#676041)
  * bugfix: potential abort condition when $RepeatedMsgReduction
  were set to on as well as potentially in a number of other places
  where MsgDup() was used. This only happened when the imudp input
  module was used and it depended on name resolution not yet had
  taken place. (bnc#679030)
  * bugfix: fixed a memory leak and potential abort condition
  this could happen if multiple rulesets were used and some output
  batches contained messages belonging to more than one ruleset.
  fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=226
  fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=218
  * bugfix: memory leak when $RepeatedMsgReduction on was used
  bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=225
  (bnc#681568)
- Merged systemd socket activation support

-------------------------------------------------------------------
Wed Feb  2 16:47:24 UTC 2011 - mt@suse.de

- update to 5.6.3 (v5-stable) with following bugfixes (digest):
  * action processor released mememory too early, resulting in
  potential issue in retry cases (very unlikely).
  * batch processing flagged invalid message as "bad" under some
  circumstances
  * unitialized variable could cause issues under extreme
  conditions plus some minor nits.
  * batches which had actions in error were not properly retried
  in all cases
  * imfile did duplicate messages under some circumstances
- enabled plain tcp input, unix socket output, last message
  parser and the libdbi module as separate package.
- disabled systemd patch for openSUSE <= 11.3

-------------------------------------------------------------------
Thu Jan 20 14:10:59 UTC 2011 - mt@suse.de

- Improved systemd socket activation support to allow multiple
  unix sockets and activation in forking mode (bnc#656197).

-------------------------------------------------------------------
Fri Dec  3 16:49:41 UTC 2010 - mt@suse.de

- update to 5.6.2 (v5-stable) with following bugfixes:
  * compile failed on systems without epoll_create1()
    Thanks to David Hill for providing a fix.
  * atomic increment for msg object may not work correct on
    all platforms. Thanks to Chris Metcalf for the patch
  * replacements for atomic operations for non-int sized types
    had problems. At least one instance of that problem could
    potentially lead to abort (inside omfile).
- Increased mark frequency in rsyslog.conf to 1 hour
- Enabled duplicate message reduction in rsyslog.conf to catch
  at least buggy programs running amok and writting same message
  zillion times until the disk gets out of space (bnc#656197).
- Merged rsyslog-systemd-integration.bnc656104.diff (fuzz=0).

-------------------------------------------------------------------
Mon Nov 29 10:32:58 CET 2010 - mt@suse.de

- update to 5.6.1
  This release addresses a TLS bug, that has been bothering a lot
  of users lately. It stops rsyslog from looping, thus disabling
  functionality and bearing the risk of unresponsiveness of the
  whole system. Other issues have been fixed for imptcp, failing
  testbench, segfault on empty templates and failed compile.
  For more detailed information, please review the ChangeLog and
    http://bugzilla.adiscon.com/show_bug.cgi?id=194,
    http://bugzilla.adiscon.com/show_bug.cgi?id=204,
    http://bugzilla.adiscon.com/show_bug.cgi?id=206.
- applied systemd integration base patch (without the service and
  socket unit files, because we'll use same for all syslog damons)
  extracted from git master (bnc#656104).

-------------------------------------------------------------------
Sat Nov 20 16:15:46 UTC 2010 - coolo@novell.com

- build with libnet-devel on 11.4

-------------------------------------------------------------------
Mon Nov 15 14:59:21 UTC 2010 - chris@computersalat.de

- update to 5.6.0
  This release brings all changes and enhancements of the 5.5.x
  series to the v5-stable branch.
  - bugfix: a couple of problems that imfile had on some platforms,
    namely Ubuntu (not their fault, but occured there)
  - bugfix: imfile utilizes 32 bit to track offset. Most importantly,
    this problem can not experienced on Fedora 64 bit OS (which has
    64 bit long's!)
- removed obsolete patch
  - xconsole-pipe-loop
- rpmlint
  - name-repeated-in-summary C Rsyslog

-------------------------------------------------------------------
Wed Apr 28 17:21:03 UTC 2010 - mt@suse.de

- Added $klogConsoleLogLevel 1 to the config, to use same default
  [KERNEL_LOGLEVEL in /etc/sysconfig/syslog] as klogd (bnc#593699).
- Improved filter to discard iptables msgs higher err on console,
  changed to set default file template instead per file, removed
  duplicate filters (bnc#593699).

-------------------------------------------------------------------
Tue Apr 27 12:01:44 UTC 2010 - mt@suse.de

- Applied fix to avoid a tight send-retry loop in case there is
  nobody receiving the messages sent to the xconsole pipe
  (bnc#597293, http://bugzilla.adiscon.com/show_bug.cgi?id=186).
- Disabled relp support for < 11.3 (librelp is new)
- Fixed to create /var/run/rsyslog in post-install (rpmlint)

-------------------------------------------------------------------
Wed Apr 14 12:16:29 UTC 2010 - mrueckert@suse.de

- dropped install_all_modules_in_lib conditional and all related
  code
- new subpackages
  - enable RELP support. new depdendency librelp
  - enable diagnotic tools.
  - enable UDP spoof support. new dependency libnet
- moved module paths to 2 variables defined on top of the spec

-------------------------------------------------------------------
Tue Apr 13 08:56:15 UTC 2010 - mt@suse.de

- Updated to rsyslog version 5.4.0 (v5-stable). This version begins
  a new stable series based on the 5.3.x series, which has been
  proven rather well in practice. The new 5.4.0 contains fixes for
  all known problems. See ChangeLog file for a detailed history.
  The main new feature is speed: several optimizations were done,
  including support for epoll in tcp listeners.
- Added new lmzlibw.so and omruleset.so to the file list.
- Recompressed original tar.gz source archive using bzip2.

-------------------------------------------------------------------
Wed Sep  9 21:36:16 CEST 2009 - mt@suse.de

- Added read-only RSYSLOGD_NATIVE_VERSION sysconfig/syslog variable,
  that is set to the native mode version number for the -c parameter
  while every installation and used in the /etc/init.d/syslog script,
  except the user overrides this default in RSYSLOGD_COMPAT_VERSION.

-------------------------------------------------------------------
Wed Sep  2 20:15:28 CEST 2009 - mt@suse.de

- Updated to rsyslog version 4.4.1 (v4-stable), a bug-fixing release,
  providing some important fixes for issues that have only been
  detected after the beta phase. Some of them are serious (like a
  segfault when UDP messageforwarding is activated), so users of
  4.4.0 are urged to upgrade to this release. Changelog for 4.4.1:
  * features requiring Java are automatically disabled if Java
    is not present (thanks to Michael Biebl for his help!)
  * bugfix: invalid double-quoted PRI, among others in outgoing
    messages. This causes grief with all receivers.
    Bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=147
  * bugfix: Java testing tools were required, even if testbench
    was disabled. This resulted in build errors if no Java was
    present on the build system, even though none of the selected
    option actually required Java. (I forgot to backport a similar
    fix to newer releases).
  * bugfix (backport): omfwd segfault. Note that the orginal (higher
    version) patch states this happens only when debugging mode is
    turned on. That statement is wrong: if debug mode is turned off,
    the message is not being emitted, but the division by zero in
    the actual parameters still happens.
- Removed jave2-devel-packages from build requires again

-------------------------------------------------------------------
Tue Sep  1 11:34:12 CEST 2009 - mt@suse.de

- Updated to rsyslog version 4.4.0, the actual stable 4.4.x series.
  It provides several bugfixes, performance improvements and new
  features: It adds generic network stream server for syslog, the
  capability to rebind the send socket of the UDP output section,
  allows multiple tcp listeners, multiple recipients in ommail,
  new plugins as omprog, improved documentation and testbench
  with a config switch. Please review ChangeLog file for details.
- Removed obsolete moddirs patch (included in 4.4.0)
- Added java2-devel-packages to BuildRequires (for test suite)
- Enabled omprog and omtemplate plugins, added them and the
  lmstrmsrv plugin to the base-plugins file list.

-------------------------------------------------------------------
Mon Apr 20 17:35:16 CEST 2009 - mt@suse.de

- Improved config file comments about usage of additional
  modules provided in separate rsyslog-module packages.
- Enabled GnuTLS (syslog-transport-tls) support module.

-------------------------------------------------------------------
Mon Apr 20 13:32:03 CEST 2009 - mt@suse.de

- Updated to rsyslog 3.20.6 [v3-stable]

-------------------------------------------------------------------
Mon Dec 15 14:51:08 CET 2008 - mt@suse.de

- Security fix to honor $AllowedSender settings (bnc#457273).
- Security fix [DoS] from 3.20.2 to emit a discard message every
  minute only (when DisallowWarning enabled) instead of every time;
  this prevernts an attacker can fill the disk (bnc#457273).

-------------------------------------------------------------------
Wed Sep 10 15:11:05 CEST 2008 - schwab@suse.de

- Run autoreconf.

-------------------------------------------------------------------
Tue Sep  9 16:16:14 CEST 2008 - mt@suse.de

- Enabled mail, imfile and imtemplate modules
- Enabled snmp module, packaged as rsyslog-module-snmp
- Added patch to support multiple module directories,
  in our case /lib[64]/rsyslog:/usr/lib[64]/rsyslog

-------------------------------------------------------------------
Thu Sep  4 15:15:14 CEST 2008 - mt@suse.de

- initial rsyslog 3.18.3 package

Places

File rsyslog.changes of Package rsyslog (Revision 9f84e3688e25c249bf4f4f5e10202b89)

Places