Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
openSUSE:Factory:Rebuild
sonic-visualiser
sonic-visualiser.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File sonic-visualiser.changes of Package sonic-visualiser
------------------------------------------------------------------- Sun Oct 6 02:22:39 UTC 2024 - Konstantin Voinov <kv@kott.no-ip.biz> - Update to 5.0.1 * Fix occasional crashes in the Mac package, caused by a Qt bug, by updating the version of Qt used when packaging * Fix bug in Preferences that prevented some of the analysis settings from taking effect * Fix failure to load some older 32-bit Windows Vamp plugins * Update UI translation loading logic to better reflect system locale settings ------------------------------------------------------------------- Sat Sep 7 09:39:59 UTC 2024 - Konstantin Voinov <kv@kott.no-ip.biz> - Use gcc-12 for Leap 15.6 - Update to 5.0 * Port to Qt6. The code now builds only with Qt6, and Qt5 is no longer supported * Add mechanism to ignore plugins on subsequent runs if they fail to load, and to review ignored plugins from the preferences dialog * Add Mel scale to the options for vertical spectrogram scale * Add an opaque toggle to the spectrogram; switching it off gives spectrograms some transparency, so they can be overlaid over other layers, including other spectrograms * Update opaque toggle in colour 3d layers so that it works like the new one in the spectrogram. Previously colour 3d plot layers could be translucent at low resolutions but not at higher ones; now the setting affects all resolutions. Correspondingly make it default to off, as in the spectrogram * Add smoothing toggle directly to spectrogram parameters, like the one already found in colour 3d plot layers. Previously spectrogram smoothing could be toggled only from the preferences * Stop snapping spectrogram frequency range to bin frequencies. This already-confusing feature caused problems with the new support for translucent spectrograms, which permits overlaying spectrograms of differing bin counts that would be too hard to line up properly if the frequency extents were always snapped to the nearest bin * Clarify keyboard and mouse shortcut descriptions in the Key And Mouse Reference window, especially for the platform-specific descriptions used on the Mac, and add a few more alternative shortcuts including more standard zoom in/out shortcuts * Fix disappearing peaks in peak-bin display mode in the spectrogram, caused by overzealous smoothing * Fix jumps in spectrogram when changing zoom level between certain values in hi-dpi pixel-doubled situations, caused by a failure of cache invalidation * Fix some very slow spectrogram painting * Fix disappearance of right-button Transforms menu after file load * Fix inconsistent default vs set threshold values in spectrogram * Fix crash on painting very low-resolution dense 3d plots ------------------------------------------------------------------- Mon Feb 26 13:42:48 UTC 2024 - Dominique Leuenberger <dimstar@opensuse.org> - Use %patch -P N instead of deprecated %patchN. ------------------------------------------------------------------- Thu Jun 22 03:10:24 UTC 2023 - Konstantin Voinov <kv@kott.no-ip.biz> - Update to 4.5.2 - Remove sonic-visualiser-Fix-build-failure.patch as fixed in upstream - Use system vamp host sdk * Support multi-line text labels on time instants * Improve refresh and rendering of text labels in various layers * Improve abbreviation of layer names in the key at bottom-right of a pane * Fix repeated writes to settings file when rendering time-ruler layers at close zoom levels * Use system Vamp host SDK if provided - Changes in 4.5.1 * Update to use Rubber Band v3 with its higher quality timestretcher (the older, lower-CPU one is still available in preferences). This means the build requires rubberband-3.0.0 or newer, so you may need to install it separately if building on an older system. * Fix inability to select Hz as the unit of a layer following import * Provisional fix to bailing out on startup when invoked with "Open With..." on Mac * Fix nonsense display when showing frequency scaled points with value of 0Hz ------------------------------------------------------------------- Tue Oct 25 00:41:40 UTC 2022 - Konstantin Voinov <kv@kott.no-ip.biz> - Add patch sonic-visualiser-Fix-build-failure.patch ------------------------------------------------------------------- Thu Apr 14 01:12:22 UTC 2022 - Konstantin Voinov <kv@kott.no-ip.biz> - copypac from home:munix9 - changes in versio 4.5: * Add option to switch off the interpolation used in the waveform view for zoom levels closer than one pixel per frame: sometimes it can be an unnecessary distraction. With interpolation switched off, the individual samples are shown as unconnected points instead * Make it possible to toggle segment colouring in the segmentation view of the time value layer, as well as toggling segment division lines * When importing CSV files, if a column heading indicates a likely unit for the column, use it by default; also remember last user settings for the import dialog * Ensure the Choose Default Template option on the templates menu can be reached even when no file is loaded * Give the spectrum layer the same effective scale range as it had before the dB scale fix in v4.4, fixing the accidental halving of the visible range for that layer in v4.4 * Fix hang when opening two plugin parameter dialogs at once * Fix crash when rendering slice or spectrum layers scrolled to earlier than the start of the audio or later than the end * Fix crash when more than one audio file is supplied at the command line with a default session template that requires regenerating one or more feature extraction layers and layer generation produces an error or warning * Fix failure to exit fully if the window is closed before plugin scan is complete at startup ------------------------------------------------------------------- Thu Mar 31 18:22:17 UTC 2022 - munix9@googlemail.com - update to version 4.5 ------------------------------------------------------------------- Sun Mar 28 13:23:20 UTC 2021 - Luigi Baldoni <aloisio@gmx.com> - Remove download URL from Source line due to certificate troubles ------------------------------------------------------------------- Fri Mar 26 03:42:39 UTC 2021 - Konstantin Voinov <kv@kott.no-ip.biz> - Update to 4.3 * Fix failure to activate the Align button on startup, even when the appropriate alignment plugin is installed * Fix (obviously) incorrect colour display for closely zoomed-in colour 3d plot views * Switch the build system from autoconf/qmake/make to meson/ninja ------------------------------------------------------------------- Fri Jan 1 07:24:00 UTC 2021 - Luigi Baldoni <aloisio@gmx.com> - Actually remove 0001-Fix-build-with-Qt-5.15.patch - Set correct download URL ------------------------------------------------------------------- Thu Dec 31 22:19:56 UTC 2020 - Edgar Aichinger <edogawa@aon.at> - Update to 4.2 - Remove 0001-Fix-build-with-Qt-5.15.patch (fixed upstream) ------------------------------------------------------------------- Sat Jun 6 09:09:43 UTC 2020 - Christophe Giboudeaux <christophe@krop.fr> - Add patch to fix build with Qt 5.15: * 0001-Fix-build-with-Qt-5.15.patch ------------------------------------------------------------------- Tue Jan 28 13:25:18 UTC 2020 - Christophe Giboudeaux <christophe@krop.fr> - Update to 4.0.1 * Fix the vertical scale in NoteLayer when displaying a model with non-Hz scale * Fix failure to make installed executables executable when compiling and installing the source package - Remove conditions for unmaintained openSUSE versions. - Don't use -Werror. ------------------------------------------------------------------- Thu Oct 31 19:43:38 UTC 2019 - Edgar Aichinger <edogawa@aon.at> - Update to version 4.0 * Add Box annotation layer type, typically used for time-frequency boxes to be annotated over a spectrogram. Because this introduces a new layer type into the session file format, the major version number has been bumped to v4.0. Sessions saved from v4.0 can still be opened in earlier versions of Sonic Visualiser, but any Box layers will not be loaded * Fix behaviour of auto-align layers on top of waveform: they can now be aligned in the vertical scale, if they have a unit of V and the waveform is of a single channel in linear or dB mode * Make the UI more readable in macOS "dark mode" * Fix sluggishness in starting and stopping playback when using PulseAudio v13.0+ Changes in version 3.3 * Add support for reading the Opus audio codec on all platforms * Add support for WMA and AAC formats on 64-bit Windows. (AAC was already supported on macOS.) Note that AAC support on Windows does not support "gapless" import, i.e. removing the encoder gaps at start and end of the stream * Add ability to choose the field separator when importing CSV and CSV-like files, if more than one possible candidate separator is found in the file * Fix crash when closing session or starting a new session while calculating alignment of multiple audio files * Fix crash when running certain plugins that call for frequency-domain input at non-power-of-two block sizes * Fix wandering left edge of measure-tool rectangle while dragging out the area * Ensure that plugin stderr debug output is logged to the SV log file - Refreshed sonic-visualiser-system-dataquay.patch ------------------------------------------------------------------- Wed Jan 30 07:02:28 UTC 2019 - Konstantin Voinov <kill_it@mail.ru> - Update to version 3.2.1 * Fix failure to record from built-in microphone on macOS 10.14 (caused by lack of microphone permission request text) * Fix crash when closing SV or starting a new session during recording * Fix crash on exit in some builds that disable OSC support * Fix flashing effect when scrolling certain configurations of colour 3d plot layer leftwards Changes in version 3.2 * Add ability to zoom closer than one sample per pixel, so as to see the interpolated signal level between samples * Add oversampling control to the spectrogram and spectrum layers * Highlight and label frequency peaks in the spectrum as the mouse rolls over them, when enabled in the parameter area * Add feature to convert and import audio from a CSV data file * Add some new colour maps, and restore the old Blue on Black one * Speed up spectrum rendering at high resolutions * Fix failure to pass Nyquist bins correctly to frequency-domain-input Vamp plugins in some circumstances * Fix sometimes incorrect shortcut associations for new-layer menu items * Various other rendering improvements and bug fixes - Refreshed sonic-visualiser-system-dataquay.patch ------------------------------------------------------------------- Fri Oct 26 18:31:18 UTC 2018 - Wolfgang Bauer <wbauer@tmo.at> - Use gcc7 on Leap 42.3 to fix build ------------------------------------------------------------------- Fri Oct 12 09:10:00 UTC 2018 - Luigi Baldoni <aloisio@gmx.com> - Update to version 3.1.1 * Fix failure to record correctly into an empty session with certain audio drivers * Fix failure to run LADSPA plugins at all, except with some unusual path layouts * Fix failure to silence sonified notes when rewinding backwards or jumping back from a loop endpoint ------------------------------------------------------------------- Mon Aug 6 13:37:09 UTC 2018 - aloisio@gmx.com - Fixed the tests and dropped sonic-visualiser-remove-svcore-test.patch ------------------------------------------------------------------- Tue Jul 17 14:59:23 UTC 2018 - aloisio@gmx.com - Update to version 3.1 * Add Plugins tab to Preferences dialog, from which you can review the plugin load paths and see which plugins were loaded from which locations, and also customise load paths (though the various path environment variables are still supported) * Stream the export of audio data and other CSV data so that very large exports don't hang the UI or run us out of memory (thanks to Lucas Thompson) * Ensure vertical scale appears for auto-align layers when there is nothing else to auto-align them to * Fix another long-standing Windows-platform wide-char/utf8 conversion problem, with environment variable naming and contents * Improve handling of incomplete session loads, i.e. situations where the audio files referred to by a session could not be found - previously the session could be re-saved immediately thus losing the audio reference; now at least we disable Save (enabling only Save As) and show a warning * Update pane and layer menu shortcuts so that the waveform/spectrogram/etc shortcuts (Shift+G etc) operate on the source model in the currently-selected pane rather than the main model. This is a backward-incompatible change but is a far more intuitive way for the function to work * Use dark background for bright colours in time-value/note/etc layers as well as e.g. waveforms - this is how it was always "intended to" work, but it is a backward-incompatible change * Make "Select All" select the whole span of everything that exists, not just the main model * Add horizontal scale to Spectrum layer * Improve spacing and labelling of vertical log scales * Update build system for better Cap'n Proto version support and to use Repoint for code management in the repository * Various other bug fixes - Dropped piper.capnp (fixed upstream) - Refreshed sonic-visualiser-remove-svcore-test.patch - Added sonic-visualiser-system-dataquay.patch - Spec cleanup ------------------------------------------------------------------- Thu Sep 14 05:53:39 UTC 2017 - aloisio@gmx.com - Build against dataquay also in Tumbleweed ------------------------------------------------------------------- Mon Aug 28 17:14:37 UTC 2017 - aloisio@gmx.com - Update to version 3.0.3 * Improve decisions about where and how to label vertical scales * Update build support material and documentation to reflect the official release of Cap'n Proto 0.6 (which we can now use rather than depending on git builds) version 3.0.2: * Fix crash when changing parameters for spectrum view * Fix incorrect measure tool crosshairs in spectrum view * Update Russian and Czech UI translations (thanks to Alexandre Prokoudine and Pavel Fric respectively) version 3.0.1: * Update MIDI input driver layer version 3.0: * Add ability to record audio, and ability to change the audio device for playback or recording in the preferences * Add complete support for high-resolution (Hi-DPI or retina) displays, including for layer data rendering as well as UI controls and icons. This makes the biggest difference when using a retina Mac, on which previous versions did not render layer data at retina resolution, but it also improves scaling and rendering of UI elements on Hi-DPI displays on Windows and Linux * Add ability to export scalable (SVG) image files * Run plugins in a separate process, so that if a plugin crashes, it no longer brings down Sonic Visualiser with it. In every other respect the behaviour should be unchanged * Scan plugins on startup in a separate process, and report on any that crash or won't load * Add ability to open, display, and analyse very long audio files (of more than 2^32 sample frames) * Change mp3 file loading so as to compensate for encoder/decoder delay and padding (using "gapless playback" logic). While this is a real improvement, unfortunately it does mean that the initial padding in mp3 file load has changed from previous versions, which may mean some sessions saved in previous versions are no longer correctly aligned. It's not a great idea to use mp3 as a file format of record, because of differences like this between decoders. The previous behaviour is still available as a preference. * Add new Hybrid normalisation type for spectrogram and colour 3d plot layers. This normalises each column to its peak value and then scales the normalised values by the log of the peak in order to restore some distinction in scale between columns with different levels. It can provide quite visually clear results. * Add function to subdivide time instant layers into regular intervals (and its inverse) * Add new preference for default colour scales * Add a basic ability to zoom (in the frequency axis) to the spectrum * Switch to using combined level/pan controls in layer property boxes and for the main volume control * Make CSV file reader better able to handle files with varying numbers of columns * Add "What's New" dialog - Dropped sonic-visualiser-ld-X11-fix.patch and refreshed sonic-visualiser-remove-svcore-test.patch - Added piper.capnp schema to generate sources without the hardcoded capnp 0.6.0 - Dropped sonic-visualiser.desktop - Added fishsound requirement ------------------------------------------------------------------- Fri Aug 25 06:10:58 UTC 2017 - olaf@aepfle.de - Remove mad conditional because it is always present ------------------------------------------------------------------- Sat Jan 7 16:00:06 UTC 2017 - aloisio@gmx.com - Update to version 2.5 * Add unit-converter dialog, for converting between various pitch and timing units * Fix failure to reload note layers from session file * Use a more sensible scale for the play-speed dial * Fix crash when importing very wide CSV files * Fix generation of wrong layer type from some CSV files * Fix failure to export last instant in a time-instant layer version 2.4: * Fix a crash when rendering certain colour 3d plot layers version 2.3: * Add support for left/right scrolling using a two-finger touchpad gesture (where available) * Make the octave numbering into a configurable option, and change the default. Previously Sonic Visualiser labelled middle-C as "C3"; now it labels middle-C as "C4", a more common standard in the world outside MIDI sequencer software. The previous system is available as an option in the Preferences. This affects only the visible labels: there is no change to analysis or to the file format * Sonify time-value layers. Any time-value curve whose scale unit is set to Hz will now acquire a playback toggle control; this control is off by default, but if it is switched on, the curve will be played back using a variable-frequency sound generator * Add support for playback of note layers with non-MIDI frequencies (formerly the note playback was limited to exact MIDI pitch) * Change the default playback sample for note layers from piano to an electric piano with sustain. The piano sample is still available, and any sessions saved using it should continue to use it * Add a cancel button for Vamp plugin processing: currently, cancelling a transform results in a part-complete layer rather than removing the results * Add keyboard shortcuts to cycle the current layer (in addition to the existing ones to cycle the current pane) * Fix various bugs related to layer ordering: layer tabs re-ordering themselves randomly when new layer added, layers being ordered randomly when saving and reloading a session * Fix incorrect interaction with non-Unicode usernames when creating temporary and template directories on Windows * Shade the start and end of the main audio file, to make them easier to see for files that start or end in silence * Speed up rendering and scrolling in time-value layers * Make it possible to import CSV files directly into Note layers by adding Pitch as a data type in the CSV file import dialog * Fix play pointer jump to wrong frame when clicking on row in the layer edit dialog * Fix problems with keyboard shortcuts when using Qt5 on OS/X. This is the first release in which the official builds use Qt5 for all platforms. version 2.2: * Add a startup welcome dialog that also explains what SV makes network connections for and allows user to forbid them * Add "Export Audio Data" feature * Show piano keyboard scale in note and time-value layers as well as spectrogram, where vertical scale is log Hz; also show numerical scale in note and region layers when not auto-aligned * Speed up CSV file import and avoid showing crazily wide window for CSV file format dialog when file has lots of columns * Fix incorrectly saved window geometry when exiting from maximised state * Reduce number of timer wakeups when idle * Add American English translation and make choice of translation into a preference (defaulting to system locale) * Permit installation to non-default location with Windows installer build version 2.1: * Build with support for hidpi ("retina") text on OS/X * Fix very slow analysis when using Ogg or FLAC files decoded via libsndfile * Fix inaccurate scale auto-align between time-value layers and others * Fix failure to open files specified on command line (or via Open With) on Windows * Reset cyclical counters and switch back to navigate mode when a new session is started version 2.0.1: * Fix incorrect handling of FixedSampleRate outputs (Vamp SDK fix) * Make it easier to see results from transforms that return a single point * Make labelling clearer on time-value layers * Add discrete-curve mode for time-value layers (for curves with gaps) * Update code to build against Qt5 version 2.0: * Fix incorrect samplerate in reading m4a files on OS/X version 1.9: * Support 64-bit builds on OS/X (using CoreAudio instead of obsolete QuickTime audio file reader) * Simplify RDF reading and fix some bugs. Now requires Dataquay (http://breakfastquay.com/dataquay/) rather than using Redland directly. Release builds use Sord/Serd rather than Redland * Add a fullscreen mode on the F11 key - Refreshed sonic-visualiser-ld-X11-fix.patch - Removed gcc-4.7.patch - Added sonic-visualiser-remove-svcore-test.patch sonic-visualiser.desktop and sonic-visualiser.xml - Spec cleanup ------------------------------------------------------------------- Mon Oct 6 02:01:49 UTC 2014 - avvissu@yandex.ru - Patch to fix build (gcc-4.7.patch) ------------------------------------------------------------------- Wed Mar 14 22:32:15 UTC 2012 - pascal.bleser@opensuse.org - add bits to enable mp3 support with mad when built on Packman ------------------------------------------------------------------- Wed Mar 14 19:04:44 UTC 2012 - pascal.bleser@opensuse.org - remove dependency on licenses, gone in 12.1 - reformat spec file, fix license tag to be compliant with SPDX ------------------------------------------------------------------- Thu Oct 20 00:00:00 UTC 2011 - someuniquename@gmail.com - update to 1.9 ------------------------------------------------------------------- Wed May 5 00:00:00 UTC 2010 - toni@links2linux.de - update to 1.7.2 ------------------------------------------------------------------- Thu Oct 29 00:00:00 UTC 2009 - toni@links2linux.de - update to 1.7.1 - This release contains a small number of enhancements and bug fixes. For more information, please read the change log at: https://sourceforge.net/projects/sv1/files/sonic-visualiser/1.7.1/CHANGELOG/download ------------------------------------------------------------------- Mon Oct 26 00:00:00 UTC 2009 - toni@links2linux.de - update to 1.7 - The main focus of this release is to improve editing of note and region layers. It can import MIDI files that use SMPTE timecode for event timing, and optionally display time in seconds and frames at various frame rates throughout. A crash on exit in Windows has been fixed, and a number of other bugfixes are included. ------------------------------------------------------------------- Mon Mar 16 00:00:00 UTC 2009 - toni@links2linux.de - update to 1.5 ------------------------------------------------------------------- Thu Dec 11 00:00:00 UTC 2008 - toni@links2linux.de - update to 1.4 ------------------------------------------------------------------- Thu Jul 10 00:00:00 UTC 2008 - toni@links2linux.de - update to 1.3 - using new rubberband-1.2 - added PulseAudio output driver ------------------------------------------------------------------- Sun Mar 23 00:00:00 UTC 2008 - toni@links2linux.de - rebuild with new vamp-plugin-sdk ------------------------------------------------------------------- Wed Feb 20 00:00:00 UTC 2008 - toni@links2linux.de - update to 1.2 ------------------------------------------------------------------- Mon Dec 31 00:00:00 UTC 2007 - toni@links2linux.de - rebuild with new libraptor/vamp-sdk packages ------------------------------------------------------------------- Sun Sep 9 00:00:00 UTC 2007 - toni@links2linux.de - openSUSE-10.3 build corrected BuildRequires ------------------------------------------------------------------- Tue Jun 5 00:00:00 UTC 2007 - toni@links2linux.de - rebuild with libfishsound1 (0.8.0) ------------------------------------------------------------------- Fri May 11 00:00:00 UTC 2007 - toni@links2linux.de - update to 1.0 ------------------------------------------------------------------- Tue Mar 20 00:00:00 UTC 2007 - toni@links2linux.de - update to 1.0pre3 - moved all vamp-plugins to seperate packages - using vamp-plugin-sdk to build - switched to portaudio-19 ------------------------------------------------------------------- Mon Jan 1 00:00:00 UTC 2007 - toni@links2linux.de - build SuSE-10.2, corrected BuildRequires ------------------------------------------------------------------- Thu Sep 21 00:00:00 UTC 2006 - toni@links2linux.de - build for packman ------------------------------------------------------------------- Sat May 27 00:00:00 UTC 2006 - oc2pus@arcor.de 0.9-0.oc2pus.2 - rebuild for SuSE-10.1 (no dssi-devel) ------------------------------------------------------------------- Sun May 21 00:00:00 UTC 2006 - oc2pus@arcor.de 0.9-0.oc2pus.1 - Initial release 0.9 - added vamp-QM-plugin 1.0 - added vamp-aubio-plugin 0.3.0 - added vamp-mazurka-plugins download sources from http://sv.mazurka.org.uk and packaged as tar.bz2, added libmain.cpp and create a shared lib with allmazurka-plugins
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
