Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
openSUSE:Factory:Staging:I
gdb
gdb-tdep-fix-gdb.base-watch-bitfields.exp-on-aa...
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File gdb-tdep-fix-gdb.base-watch-bitfields.exp-on-aarch64.patch of Package gdb
From 83b2b88c96f87a3649b4440f43a088dc6e292181 Mon Sep 17 00:00:00 2001 From: Tom de Vries <tdevries@suse.de> Date: Tue, 12 Mar 2024 17:08:18 +0100 Subject: [PATCH 08/48] [gdb/tdep] Fix gdb.base/watch-bitfields.exp on aarch64 On aarch64-linux, with test-case gdb.base/watch-bitfields.exp I run into: ... (gdb) continue^M Continuing.^M ^M Hardware watchpoint 2: -location q.a^M ^M Old value = 1^M New value = 0^M main () at watch-bitfields.c:42^M 42 q.h--;^M (gdb) FAIL: $exp: -location watch against bitfields: q.e: 0->5: continue ... In a minimal form, if we step past line 37 which sets q.e, and we have a watchpoint set on q.e, it triggers: ... $ gdb -q -batch watch-bitfields -ex "b 37" -ex run -ex "watch q.e" -ex step Breakpoint 1 at 0x410204: file watch-bitfields.c, line 37. Breakpoint 1, main () at watch-bitfields.c:37 37 q.e = 5; Hardware watchpoint 2: q.e Hardware watchpoint 2: q.e Old value = 0 New value = 5 main () at /home/vries/gdb/src/gdb/testsuite/gdb.base/watch-bitfields.c:38 38 q.f = 6; ... However, if we set in addition a watchpoint on q.a, the watchpoint on q.e doesn't trigger. How does this happen? Bitfield q.a is just bit 0 of byte 0, and bitfield q.e is bit 4..7 of byte 1 and bit 1 of byte 2. So, watch q.a should watch byte 0, and watch q.e should watch bytes 1 and 2. Using "maint set show-debug-regs on" (and some more detailed debug prints) we get: ... WP2: addr=0x440028 (orig=0x440029), ctrl=0x000000d5, ref.count=1 ctrl: enabled=1, offset=1, len=2 WP3: addr=0x440028 (orig=0x440028), ctrl=0x00000035, ref.count=1 ctrl: enabled=1, offset=0, len=1 ... which matches that. When executing line 37, a hardware watchpoint trap triggers and we hit aarch64_stopped_data_address with addr_trap == 0x440028: ... (gdb) p /x addr_trap $1 = 0x440028 .... and since the loop in aarch64_stopped_data_address walks backward, we check WP3 first, which matches, and consequently target_stopped_by_watchpoint returns true in watchpoints_triggered. Likewise for target_stopped_data_address, which also returns addr == 0x440028. Watchpoints_triggered matches watchpoint q.a to that address, and sets watch_triggered_yes. However, subsequently the value of q.a is checked, and it's the same value as before (becase the insn in line 37 didn't change q.a), so the watchpoint hardware trap is not reported to the user. The problem originates from that fact that aarch64_stopped_data_address picked WP3 instead of WP2. There's something we can do about this. In the example above, both target_stopped_by_watchpoint and target_stopped_data_address returned true. Instead we can return true in target_stopped_by_watchpoint but false in target_stopped_data_address. This lets watchpoints_triggered known that a watchpoint was triggered, but we don't know where, and both watchpoints get set to watch_triggered_unknown. Subsequently, the values of both q.a and q.e are checked, and since q.e is not the same value as before, the watchpoint hardware trap is reported to the user. Note that this works well for regular (write) watchpoints (watch command), but not for read watchpoints (rwatch command), because for those no value is checked. Likewise for access watchpoints (awatch command). So, fix this by: - passing a nullptr in aarch64_fbsd_nat_target::stopped_by_watchpoint and aarch64_linux_nat_target::stopped_by_watchpoint to make clear we're not interested in the stop address, - introducing a two-phase approach in aarch64_stopped_data_address, where: - phase one handles access and read watchpoints, as before, and - phase two handles write watchpoints, where multiple matches cause: - return true if addr_p == null, and - return false if addr_p != null. Tested on aarch64-linux. Approved-By: Luis Machado <luis.machado@arm.com> PR tdep/31214 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31214 --- gdb/aarch64-fbsd-nat.c | 4 +- gdb/aarch64-linux-nat.c | 4 +- gdb/aarch64-nat.c | 132 ++++++++++++++++++++++++++----------- gdb/nat/aarch64-hw-point.c | 25 +++++++ gdb/nat/aarch64-hw-point.h | 2 + 5 files changed, 123 insertions(+), 44 deletions(-) diff --git a/gdb/aarch64-fbsd-nat.c b/gdb/aarch64-fbsd-nat.c index 38fb093f139..58518248248 100644 --- a/gdb/aarch64-fbsd-nat.c +++ b/gdb/aarch64-fbsd-nat.c @@ -164,9 +164,7 @@ aarch64_fbsd_nat_target::stopped_data_address (CORE_ADDR *addr_p) bool aarch64_fbsd_nat_target::stopped_by_watchpoint () { - CORE_ADDR addr; - - return stopped_data_address (&addr); + return stopped_data_address (nullptr); } /* Implement the "stopped_by_hw_breakpoint" target_ops method. */ diff --git a/gdb/aarch64-linux-nat.c b/gdb/aarch64-linux-nat.c index c1d59b5d77c..768748a20db 100644 --- a/gdb/aarch64-linux-nat.c +++ b/gdb/aarch64-linux-nat.c @@ -972,9 +972,7 @@ aarch64_linux_nat_target::stopped_data_address (CORE_ADDR *addr_p) bool aarch64_linux_nat_target::stopped_by_watchpoint () { - CORE_ADDR addr; - - return stopped_data_address (&addr); + return stopped_data_address (nullptr); } /* Implement the "can_do_single_step" target_ops method. */ diff --git a/gdb/aarch64-nat.c b/gdb/aarch64-nat.c index ee8c5a1e21d..89d1ba6acc6 100644 --- a/gdb/aarch64-nat.c +++ b/gdb/aarch64-nat.c @@ -231,46 +231,102 @@ bool aarch64_stopped_data_address (const struct aarch64_debug_reg_state *state, CORE_ADDR addr_trap, CORE_ADDR *addr_p) { - int i; - - for (i = aarch64_num_wp_regs - 1; i >= 0; --i) - { - const unsigned int offset - = aarch64_watchpoint_offset (state->dr_ctrl_wp[i]); - const unsigned int len = aarch64_watchpoint_length (state->dr_ctrl_wp[i]); - const CORE_ADDR addr_watch = state->dr_addr_wp[i] + offset; - const CORE_ADDR addr_watch_aligned = align_down (state->dr_addr_wp[i], 8); - const CORE_ADDR addr_orig = state->dr_addr_orig_wp[i]; - - if (state->dr_ref_count_wp[i] - && DR_CONTROL_ENABLED (state->dr_ctrl_wp[i]) - && addr_trap >= addr_watch_aligned - && addr_trap < addr_watch + len) - { - /* ADDR_TRAP reports the first address of the memory range - accessed by the CPU, regardless of what was the memory - range watched. Thus, a large CPU access that straddles - the ADDR_WATCH..ADDR_WATCH+LEN range may result in an - ADDR_TRAP that is lower than the - ADDR_WATCH..ADDR_WATCH+LEN range. E.g.: - - addr: | 4 | 5 | 6 | 7 | 8 | - |---- range watched ----| - |----------- range accessed ------------| - - In this case, ADDR_TRAP will be 4. - - To match a watchpoint known to GDB core, we must never - report *ADDR_P outside of any ADDR_WATCH..ADDR_WATCH+LEN - range. ADDR_WATCH <= ADDR_TRAP < ADDR_ORIG is a false - positive on kernels older than 4.10. See PR - external/20207. */ + bool found = false; + for (int phase = 0; phase <= 1; ++phase) + for (int i = aarch64_num_wp_regs - 1; i >= 0; --i) + { + if (!(state->dr_ref_count_wp[i] + && DR_CONTROL_ENABLED (state->dr_ctrl_wp[i]))) + { + /* Watchpoint disabled. */ + continue; + } + + const enum target_hw_bp_type type + = aarch64_watchpoint_type (state->dr_ctrl_wp[i]); + if (type == hw_execute) + { + /* Watchpoint disabled. */ + continue; + } + + if (phase == 0) + { + /* Phase 0: No hw_write. */ + if (type == hw_write) + continue; + } + else + { + /* Phase 1: Only hw_write. */ + if (type != hw_write) + continue; + } + + const unsigned int offset + = aarch64_watchpoint_offset (state->dr_ctrl_wp[i]); + const unsigned int len + = aarch64_watchpoint_length (state->dr_ctrl_wp[i]); + const CORE_ADDR addr_watch = state->dr_addr_wp[i] + offset; + const CORE_ADDR addr_watch_aligned + = align_down (state->dr_addr_wp[i], 8); + const CORE_ADDR addr_orig = state->dr_addr_orig_wp[i]; + + /* ADDR_TRAP reports the first address of the memory range + accessed by the CPU, regardless of what was the memory + range watched. Thus, a large CPU access that straddles + the ADDR_WATCH..ADDR_WATCH+LEN range may result in an + ADDR_TRAP that is lower than the + ADDR_WATCH..ADDR_WATCH+LEN range. E.g.: + + addr: | 4 | 5 | 6 | 7 | 8 | + |---- range watched ----| + |----------- range accessed ------------| + + In this case, ADDR_TRAP will be 4. */ + if (!(addr_trap >= addr_watch_aligned + && addr_trap < addr_watch + len)) + { + /* Not a match. */ + continue; + } + + /* To match a watchpoint known to GDB core, we must never + report *ADDR_P outside of any ADDR_WATCH..ADDR_WATCH+LEN + range. ADDR_WATCH <= ADDR_TRAP < ADDR_ORIG is a false + positive on kernels older than 4.10. See PR + external/20207. */ + if (addr_p != nullptr) *addr_p = addr_orig; - return true; - } - } - return false; + if (phase == 0) + { + /* Phase 0: Return first match. */ + return true; + } + + /* Phase 1. */ + if (addr_p == nullptr) + { + /* First match, and we don't need to report an address. No need + to look for other matches. */ + return true; + } + + if (!found) + { + /* First match, and we need to report an address. Look for other + matches. */ + found = true; + continue; + } + + /* More than one match, and we need to return an address. No need to + look for further matches. */ + return false; + } + + return found; } /* Define AArch64 maintenance commands. */ diff --git a/gdb/nat/aarch64-hw-point.c b/gdb/nat/aarch64-hw-point.c index 6747e61e026..3b8cdcba23b 100644 --- a/gdb/nat/aarch64-hw-point.c +++ b/gdb/nat/aarch64-hw-point.c @@ -73,6 +73,31 @@ aarch64_watchpoint_length (unsigned int ctrl) return retval; } +/* Utility function that returns the type of a watchpoint according to the + content of a hardware debug control register CTRL. */ + +enum target_hw_bp_type +aarch64_watchpoint_type (unsigned int ctrl) +{ + unsigned int type = DR_CONTROL_TYPE (ctrl); + + switch (type) + { + case 1: + return hw_read; + case 2: + return hw_write; + case 3: + return hw_access; + case 0: + /* Reserved for a watchpoint. It must behave as if the watchpoint is + disabled. */ + return hw_execute; + default: + gdb_assert_not_reached (""); + } +} + /* Given the hardware breakpoint or watchpoint type TYPE and its length LEN, return the expected encoding for a hardware breakpoint/watchpoint control register. */ diff --git a/gdb/nat/aarch64-hw-point.h b/gdb/nat/aarch64-hw-point.h index 2ff9ccb5c1c..71ae2864927 100644 --- a/gdb/nat/aarch64-hw-point.h +++ b/gdb/nat/aarch64-hw-point.h @@ -73,6 +73,7 @@ #define DR_CONTROL_ENABLED(ctrl) (((ctrl) & 0x1) == 1) #define DR_CONTROL_MASK(ctrl) (((ctrl) >> 5) & 0xff) +#define DR_CONTROL_TYPE(ctrl) (((ctrl) >> 3) & 0x3) /* Structure for managing the hardware breakpoint/watchpoint resources. DR_ADDR_* stores the address, DR_CTRL_* stores the control register @@ -107,6 +108,7 @@ void aarch64_notify_debug_reg_change (ptid_t ptid, int is_watchpoint, unsigned int aarch64_watchpoint_offset (unsigned int ctrl); unsigned int aarch64_watchpoint_length (unsigned int ctrl); +enum target_hw_bp_type aarch64_watchpoint_type (unsigned int ctrl); int aarch64_handle_breakpoint (enum target_hw_bp_type type, CORE_ADDR addr, int len, int is_insert, ptid_t ptid, -- 2.35.3
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
