File gdb-tdep-fix-gdb.base-watchpoint-unaligned.exp-... of Package gdb

Overview Repositories Revisions Requests Users Attributes Meta

File gdb-tdep-fix-gdb.base-watchpoint-unaligned.exp-on-aa.patch of Package gdb

From 3efde6721b362fe0acad348443e4b961d7485717 Mon Sep 17 00:00:00 2001
From: Tom de Vries <tdevries@suse.de>
Date: Thu, 14 Mar 2024 11:25:10 +0100
Subject: [PATCH 09/48] [gdb/tdep] Fix gdb.base/watchpoint-unaligned.exp on
 aarch64

On aarch64-linux, with test-case gdb.base/watchpoint-unaligned.exp I run into:
...
(gdb) watch data.u.size8twice[1]^M
Hardware watchpoint 241: data.u.size8twice[1]^M
(gdb) PASS: gdb.base/watchpoint-unaligned.exp: watch data.u.size8twice[1]
continue^M
Continuing.^M
FAIL: gdb.base/watchpoint-unaligned.exp: continue (timeout)
FAIL: gdb.base/watchpoint-unaligned.exp: size8twice write
...

This happens as follows.

We start the exec and set an 8-byte hardware watchpoint on
data.u.size8twice[1] at address 0x440048:
...
(gdb) p sizeof (data.u.size8twice[1])
$1 = 8
(gdb) p &data.u.size8twice[1]
$2 = (uint64_t *) 0x440048 <data+16>
...

We continue execution, and a 16-byte write at address 0x440040 triggers the
hardware watchpoint:
...
  4101c8:       a9000801        stp     x1, x2, [x0]
...

When checking whether a watchpoint has triggered in
aarch64_stopped_data_address, we check against address 0x440040 (passed in
parameter addr_trap).  This behaviour is documented:
...
	  /* ADDR_TRAP reports the first address of the memory range
	     accessed by the CPU, regardless of what was the memory
	     range watched.  ...  */
...
and consequently the matching logic compares against an addr_watch_aligned:
...
	  && addr_trap >= addr_watch_aligned
	  && addr_trap < addr_watch + len)
...

However, the comparison fails:
...
(gdb) p /x addr_watch_aligned
$3 = 0x440048
(gdb) p addr_trap >= addr_watch_aligned
$4 = false
...

Consequently, aarch64_stopped_data_address returns false, and
stopped_by_watchpoint returns false, and watchpoints_triggered returns 0,
which make infrun think it's looking at a delayed hardware
breakpoint/watchpoint trap:
...
  [infrun] handle_signal_stop: stop_pc=0x4101c8
  [infrun] handle_signal_stop: delayed hardware breakpoint/watchpoint trap, ignoring
...
Infrun then ignores the trap and continues, but runs into the same situation
again and again, causing a hang which then causes the test timeout.

Fix this by allowing a match 8 bytes below addr_watch_aligned.  This
introduces the possibility for false positives, so we only do this for regular
"value changed" watchpoints.

An earlier version of this patch worked by aligning addr_watch_aligned to 16
instead of 8:
...
-  const CORE_ADDR addr_watch_aligned = align_down (state->dr_addr_wp[i], 8);
+  const CORE_ADDR addr_watch_aligned = align_down (state->dr_addr_wp[i], 16);
...
but while that fixed the test-case, it didn't fix the problem completely, so
extend the test-case to check more scenarios.

Tested on aarch64-linux.

Tested-By: Luis Machado <luis.machado@arm.com>
Approved-By: Luis Machado <luis.machado@arm.com>

PR tdep/29423
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29423
---
 gdb/aarch64-nat.c                             | 17 +++-
 gdb/testsuite/gdb.base/watchpoint-unaligned.c | 11 +--
 .../gdb.base/watchpoint-unaligned.exp         | 78 ++++++++++++-------
 3 files changed, 68 insertions(+), 38 deletions(-)

diff --git a/gdb/aarch64-nat.c b/gdb/aarch64-nat.c
index 89d1ba6acc6..a173e4e18d5 100644
--- a/gdb/aarch64-nat.c
+++ b/gdb/aarch64-nat.c
@@ -269,7 +269,7 @@ aarch64_stopped_data_address (const struct aarch64_debug_reg_state *state,
 	  = aarch64_watchpoint_length (state->dr_ctrl_wp[i]);
 	const CORE_ADDR addr_watch = state->dr_addr_wp[i] + offset;
 	const CORE_ADDR addr_watch_aligned
-	  = align_down (state->dr_addr_wp[i], 8);
+	  = align_down (state->dr_addr_wp[i], AARCH64_HWP_MAX_LEN_PER_REG);
 	const CORE_ADDR addr_orig = state->dr_addr_orig_wp[i];
 
 	/* ADDR_TRAP reports the first address of the memory range
@@ -283,8 +283,19 @@ aarch64_stopped_data_address (const struct aarch64_debug_reg_state *state,
 				 |---- range watched ----|
 		 |----------- range accessed ------------|
 
-	   In this case, ADDR_TRAP will be 4.  */
-	if (!(addr_trap >= addr_watch_aligned
+	   In this case, ADDR_TRAP will be 4.
+
+	   The access size also can be larger than that of the watchpoint
+	   itself.  For instance, the access size of an stp instruction is 16.
+	   So, if we use stp to store to address p, and set a watchpoint on
+	   address p + 8, the reported ADDR_TRAP can be p + 8 (observed on
+	   RK3399 SOC). But it also can be p (observed on M1 SOC).  Checking
+	   for this situation introduces the possibility of false positives,
+	   so we only do this for hw_write watchpoints.  */
+	const CORE_ADDR max_access_size = type == hw_write ? 16 : 8;
+	const CORE_ADDR addr_watch_base = addr_watch_aligned -
+	  (max_access_size - AARCH64_HWP_MAX_LEN_PER_REG);
+	if (!(addr_trap >= addr_watch_base
 	      && addr_trap < addr_watch + len))
 	  {
 	    /* Not a match.  */
diff --git a/gdb/testsuite/gdb.base/watchpoint-unaligned.c b/gdb/testsuite/gdb.base/watchpoint-unaligned.c
index b60025a64f4..d854c376be9 100644
--- a/gdb/testsuite/gdb.base/watchpoint-unaligned.c
+++ b/gdb/testsuite/gdb.base/watchpoint-unaligned.c
@@ -29,7 +29,7 @@ static volatile struct
       uint32_t size4[2];
       uint16_t size2[4];
       uint8_t size1[8];
-      uint64_t size8twice[2];
+      uint64_t size8twice[3];
     }
   u;
 } data;
@@ -44,13 +44,14 @@ write_size8twice (void)
   static const uint64_t second = 2;
 
 #ifdef __aarch64__
+  volatile void *p = &data.u.size8twice[offset];
   asm volatile ("stp %1, %2, [%0]"
 		: /* output */
-		: "r" (data.u.size8twice), "r" (first), "r" (second) /* input */
+		: "r" (p), "r" (first), "r" (second) /* input */
 		: "memory" /* clobber */);
 #else
-  data.u.size8twice[0] = first;
-  data.u.size8twice[1] = second;
+  data.u.size8twice[offset] = first;
+  data.u.size8twice[offset + 1] = second;
 #endif
 }
 
@@ -59,7 +60,7 @@ main (void)
 {
   volatile uint64_t local;
 
-  assert (sizeof (data) == 8 + 2 * 8);
+  assert (sizeof (data) == 8 + 3 * 8);
 
   write_size8twice ();
 
diff --git a/gdb/testsuite/gdb.base/watchpoint-unaligned.exp b/gdb/testsuite/gdb.base/watchpoint-unaligned.exp
index d31a9cdc2c8..c58704d033d 100644
--- a/gdb/testsuite/gdb.base/watchpoint-unaligned.exp
+++ b/gdb/testsuite/gdb.base/watchpoint-unaligned.exp
@@ -151,38 +151,56 @@ foreach wpcount {4 7} {
     gdb_assert $got_hit $test
 }
 
-if ![runto_main] {
-    return -1
-}
-gdb_breakpoint [gdb_get_line_number "final_return"] "Breakpoint $decimal at $hex" "final_return"
-set test {watch data.u.size8twice[1]}
-set wpnum 0
-gdb_test_multiple $test $test {
-    -re "Hardware watchpoint (\[0-9\]+): .*\r\n$gdb_prompt $" {
-	set wpnum $expect_out(1,string)
-	pass $gdb_test_name
-    }
-    -re "Watchpoint (\[0-9\]+): .*\r\n$gdb_prompt $" {
-	if {[istarget "arm*-*-*"]} {
-	    untested $gdb_test_name
-	} else {
-	    fail $gdb_test_name
-	}
-    }
-}
-if {$wpnum} {
-    set test "continue"
-    set got_hit 0
-    gdb_test_multiple $test $test {
-	-re "\r\nCould not insert hardware watchpoint .*\r\n$gdb_prompt $" {
+# We've got an array with 3 8-byte elements.  Do a store of 16 bytes,
+# to:
+# - elements 0 and 1 (offset == 0), and
+# - elements 1 and 2 (offset == 1).
+# For each case, check setting a watchpoint at:
+# - the first written element (index == 0), and
+# - the second element (index == 1).
+foreach_with_prefix offset { 0 1 } {
+    foreach_with_prefix index { 0 1 } {
+
+	clean_restart $binfile
+
+	if ![runto_main] {
+	    return -1
 	}
-	-re "Hardware watchpoint $wpnum:.*New value = .*\r\n$gdb_prompt $" {
-	    set got_hit 1
-	    send_gdb "continue\n"
-	    exp_continue
+
+	gdb_test_no_output "set var offset = $offset"
+	gdb_breakpoint [gdb_get_line_number "final_return"] \
+	    "Breakpoint $decimal at $hex" "final_return"
+	set watch_index [expr $offset + $index]
+	set test "watch data.u.size8twice\[$watch_index\]"
+	set wpnum 0
+	gdb_test_multiple $test $test {
+	    -re "Hardware watchpoint (\[0-9\]+): .*\r\n$gdb_prompt $" {
+		set wpnum $expect_out(1,string)
+		pass $gdb_test_name
+	    }
+	    -re "Watchpoint (\[0-9\]+): .*\r\n$gdb_prompt $" {
+		if {[istarget "arm*-*-*"]} {
+		    untested $gdb_test_name
+		} else {
+		    fail $gdb_test_name
+		}
+	    }
 	}
-	-re " final_return .*\r\n$gdb_prompt $" {
+	if {$wpnum} {
+	    set test "continue"
+	    set got_hit 0
+	    gdb_test_multiple $test $test {
+		-re "\r\nCould not insert hardware watchpoint .*\r\n$gdb_prompt $" {
+		}
+		-re "Hardware watchpoint $wpnum:.*New value = .*\r\n$gdb_prompt $" {
+		    set got_hit 1
+		    send_gdb "continue\n"
+		    exp_continue
+		}
+		-re " final_return .*\r\n$gdb_prompt $" {
+		}
+	    }
+	    gdb_assert $got_hit "size8twice write"
 	}
     }
-    gdb_assert $got_hit "size8twice write"
 }
-- 
2.35.3

Places

File gdb-tdep-fix-gdb.base-watchpoint-unaligned.exp-on-aa.patch of Package gdb

Places