openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File colord.changes of Package colord (Revision 4e958180da2a86783800313b49334bb2)

Currently displaying revision 4e958180da2a86783800313b49334bb2 , Show latest

-------------------------------------------------------------------
Tue Dec 16 10:48:19 UTC 2014 - dimstar@opensuse.org

- Update to version 1.2.7:
  + Bugfixes:
    - Don't build the daemon when compiling for MinGW.
    - Use wine to run the client build tools when compiling under
      MinGW.

-------------------------------------------------------------------
Thu Nov 27 09:50:45 UTC 2014 - dimstar@opensuse.org

- Update to version 1.2.6:
  + New Features:
    - Allowing compile using mingw.
    - Make the ArgyllCMS sensor driver optional.
    - libcolord:
      . Add cd_it8_get_xyz_for_rgb().
      . Add cd_it8_utils_calculate_gamma().
      . Add cd_spectrum_get_resolution().
      . Add cd_spectrum_get_value_raw().
      . Add cd_spectrum_normalize_max().
      . Add cd_spectrum_set_value().
  + Bugfixes:
    - libcolord:
      . Allow a SPECTRAL_START_NM value of zero.
      . Always replace CCSS spectral data of the same ID.
      . Deep copy the spectral data when using cd_spectrum_dup().
      . Fix using cd_it8_add_spectrum() where the spectra have no
        ID values.
      . Never allow duplicate CCSS IDs for small wavelength ranges.
      . Only set SPECTRAL_NORM when the normalisation is enabled.
      . Return correct values when no LUMINANCE_XYZ_CDM2 is
        specified.
      . Use double precision for SPECTRAL_START_NM and
        SPECTRAL_END_NM.
      . When using cd_it8_add_spectrum() replace any with the same
        ID.
- Changes from version 1.2.5:
  + New Features:
    - Add a branding-less ColorHug2 figure.
    - Add the calculate-ccmx subcommand to cd-it8.
    - Install the now-useful cd-it8 helper.
  + Bugfixes:
    - Drop nb.po, its superfluous with nb_NO.po around.
    - Fix a crash in the session helper while calibrating.
    - Remove the private cd-find-broken tool.
- Add argyllcms BuildRequires and Requires.

-------------------------------------------------------------------
Sun Oct 19 20:57:45 UTC 2014 - zaitor@opensuse.org

- Update to version 1.2.4:
  + New Features:
    - libcolord: Add cd_mat33_init() helper function.
    - libcolorhug: Retry the command if the response is incomplete.
  + Bugfixes:
    - Don't enable PIE support when --without-pic is specified.
    - libcolord: Build with PIE enabled.

-------------------------------------------------------------------
Tue Oct 14 18:22:29 UTC 2014 - opensuse@cboltz.de

- AppArmor profile: allow reading /etc/udev/hwdb.bin (bnc#901148)

-------------------------------------------------------------------
Mon Sep 15 06:47:53 UTC 2014 - kkaempf@suse.com

- Update to version 1.2.3:
  + New Features:
    - colorhug:
      . Add ch_device_check_firmware().
      . Add ch_device_mode_from_firmware().
      . Use a different PID for the ColorHug2 bootloader.
  + Bugfixes:
    - Fix the device path to allow uid or username to be omitted.
    - There is no seat if running in a chroot.
- Add systemd %pre and %post macros for colord.service.
- Add rccolord symlink.

-------------------------------------------------------------------
Sat Aug 23 21:27:22 UTC 2014 - dimstar@opensuse.org

- Update to version 1.2.2:
  + New Features:
    - Add a helper to calculate the ΔE of two colors.
    - Bump the lcms2 dep to 2.6.
    - Use the ColorHug sensor driver for the ColorHug2 hardware.
  + Bugfixes:
    - Actually parse the EDID for better duplicate detection.
    - Actually write a file when using cd_icc_save_default().
    - Do not try to return a CdIcc instance for virtual profiles.
    - Use __attribute__(cleanup) to simplify memory cleanup.

-------------------------------------------------------------------
Fri Aug 22 09:29:50 UTC 2014 - meissner@suse.com

- AppArmor profile: Allow sessions of greeter style seats also to
  be read (bnc#893081).

-------------------------------------------------------------------
Tue Jul  1 17:47:51 UTC 2014 - dimstar@opensuse.org

- Update to version 1.2.1:
  + New Features:
    - Allow users to rename session and system ICC profiles.
  + Bugfixes:
    - Fix building the CMF spectra on OpenBSD/sparc64.
    - Fix the style of two colorimeter figures.
    - Make colord polkit policy usable on servers.
    - Trim out the CUPS-supplied prefix for the printer serial
      number.
  + Updated translations.
- Drop type-mismatch.patch: fixed upstream.

-------------------------------------------------------------------
Sun May 18 22:16:01 UTC 2014 - schwab@linux-m68k.org

- type-mismatch.patch: fix type mismatch (fdo#77535).

-------------------------------------------------------------------
Mon Apr  7 17:50:42 UTC 2014 - zaitor@opensuse.org

- Update to version 1.2.0:
  + New Features:
    - Generate the CMFs from source data.
    - Install several standard illuminants.
    - Install the CRI Test Color Samples.
    - Make colormgr script friendly by allowing filtering.
    - Colord:
      . Add a RGB32 pixel format for GdkPixbuf.
      . Add a utility function to calculate an XYZ value from a
        CMF.
      . Add a whitepoint value to cd_color_xyz_to_uvw().
      . Add CdColorUVW and some useful functionality.
      . Add cd_color_xyz_to_cct().
      . Add cd_icc_get_context() to get the internal cmsContext
        used lcms2.
      . Add cd_it8_utils_calculate_cri_from_cmf() to generate a
        CRI.
      . Add cd_spectrum_multiply() to multiply two spectra.
      . Add cd_spectrum_planckian_new().
      . Add functionality to read and write raw tag data.
      . Support CCSS data files.
      . Support SPECTRAL_NORM in it8 files.
    - colorhug: Support setting and getting the DAC value.
  + Bugs fixed:
    - Correctly convert all of the image when using CdTransform.
    - EDID strings can be up to 13 bytes.
    - Fix the blue primary check so ProPhotoRGB is not marked as
      invalid.
    - Fix the tag 'size' when viewing a profile in cd-iccdump with
      newer lcms versions.
    - Colord:
      . Do not invalidate the CdTransform if the CdIcc object does
        not change.
      . Do not use G_GNUC_WARN_UNUSED_RESULT when uninhibiting.
      . Fix a potential crash when destroying a CdIt8 object.
      . Fix the GObject introspection for cd_device_get_profiles().
      . Improve the error handling in CdIt8.
      . Load the profile defaults when using
        cd_icc_create_default().
    - colorhug:
      . Handle failure to initialise GUsb in self-tests.
      . Rename 'ColorHug Spectro' to 'ColorHug+' for trademark
        reasons.

-------------------------------------------------------------------
Sat Mar  8 12:47:22 UTC 2014 - dimstar@opensuse.org

- Update to version 1.1.7:
  + New Feature: Use the new cmsContext functionality in LCMS 2.6.
  + Bugfixes in libcolord:
    - Fix the GObject introspection for cd_device_get_profiles().
    - Load the profile defaults when using cd_icc_create_default().

-------------------------------------------------------------------
Fri Jan 24 14:57:33 UTC 2014 - zaitor@opensuse.org

- Update to version 1.1.6:
  + Bugs fixed:
    - Fix the tag 'size' when viewing a profile in cd-iccdump.
    - Only include libudev in Requires.private on Linux.
    - Use the corect sensor-kind values for GretagMacbeth sensors.
    - libcolord: Do not use G_GNUC_WARN_UNUSED_RESULT when
      uninhibiting.
    - libcolorhug: Handle failure to initialise GUsb in self-tests.

-------------------------------------------------------------------
Sun Dec 15 11:04:36 UTC 2013 - zaitor@opensuse.org

- Update to version 1.1.5:
  + New Features:
    - Change the --enable-gudev parameter into --enable-udev.
    - Fall back to parsing pnp.ids if udev is not available.
  + Bugs fixed:
    - Don't crash with zero-sized ICC file.
    - Never add USB hubs as scanner devices even if tagged.
    - Never create color managed webcam devices.
    - session-helper: Do not crash when moving the sensor position.
    - libcolord:
      . Check that the vendor and model are valid UTF-8.
      . Do not write invalid data when the resaving a profile.
      . Don't create legacy locations.
      . Ensure the parsed EDID strings are valid UTF-8.
      . Ensure the version is set when creating from the EDID.
      . Fix crash when using cd_color_get_blackbody_rgb().
      . No critical warning if udev_hwdb_new() fails.

-------------------------------------------------------------------
Wed Nov 20 21:10:43 UTC 2013 - dimstar@opensuse.org

- Update to version 1.1.4:
  + Only syslog() profile additions when they're added via DBus.
  + Reset the LCMS log handlers to default after use.
  + Use the threadsafe versions of the LCMS functions.
- Changes from version 1.1.3:
  + Fix a very mild security bug: If you send keep sending hundreds
    of megabytes of random text data to the SetProperty() method
    you can eventually cause the daemon to use a lot of memory and
    then crash with an out-of-memory condition. As the daemon runs
    as restricted user and is respawned by any client, the system
    automatically recovers from it.
  + Never print incomplete 'colormgr dump' output.
  + Restrict the length of key and values when setting metadata.

-------------------------------------------------------------------
Wed Oct 23 21:49:30 UTC 2013 - opensuse@cboltz.de

- Another update for the apparmor profile (bnc#846301#c9).

-------------------------------------------------------------------
Thu Oct 17 12:08:56 UTC 2013 - opensuse@cboltz.de

- Update apparmor profile (bnc#846301).

-------------------------------------------------------------------
Fri Sep 13 20:58:36 UTC 2013 - zaitor@opensuse.org

- Update to version 1.1.2:
  + New Features:
    - Add a 'dump' colormgr command to aid debugging.
    - libcolord: Add ability to create a CdIcc object from an EDID
      blob.
    - libcolord: Add cd_icc_create_default() to use the default
      sRGB profile.
    - libcolord: Export cd_icc_utils_get_coverage() for comparing
      two profiles.
    - Set 'GAMUT_coverage(srgb)' when generating standard space
      profiles.
  + Bugs fixed:
    - Allow profiles to be added or removed when the device is not
      enabled.
    - Always return soft-add calibration profiles before soft-add
      EDID profiles.
    - Do not add fake metadata to avoid creating an empty
      dictionary.
    - Do not mix up device paths and device IDs in the
      documentation.
    - Fix an error when building the print profiles.
    - Fix creation of the dummy sensor device.
    - Fix the AdobeRGB and WideGamutRGB gamma values.
    - Fix transposed bits for EDID red y.
    - Fix up various vendor quirks.
    - Fix warning when any test profile has an EDID source and no
      ICC file.
    - libcolord: Always calculate the fallback checksum when using
      CdIccStore.
    - libcolord: Do not assert on finalize if connecting to the
      profile failed.
    - Migrate from usb_id and usb_db to udev builtins usb_id and
      hwdb.
    - Show a warning for incorrect or extra command line arguments.
    - Use %ghost in the example spec file to avoid removing
      databases on upgrades.
    - Use the exact D50 whitepoint values.
- Drop colord-udev-hwdb.patch, fixed upstream.

-------------------------------------------------------------------
Wed Jul 31 17:31:04 UTC 2013 - fcrozat@suse.com

- Add colord-udev-hwdb.patch: call udev hwdb to fill appropriately
  usb device informations (backport from upstream GIT).

-------------------------------------------------------------------
Tue Jul 30 16:24:33 UTC 2013 - dimstar@opensuse.org

- Update to version 1.1.1:
  + Notes:
    - This release bumps the soname of libcolord as long deprecated
      methods have finally been removed.
    - This unstable branch is full of new features and experimental
      code.
    - The colord.conf file has been removed and features are now
      autodetected at runtime where possible or specified in
      configure.
  + New Features:
    - Add a shim libcolordcompat library with some helpers for
      ArgyllCMS.
    - Add SystemVendor and SystemModel string properties to the
      main interface.
    - Add the sub-command import-profile to colormgr.
    - libcolord:
      . Add cd_icc_save_data() so that we can set _ICC_PROFILE.
      . Add cd_icc_save_default() to save a profile to the default
        location.
      . Add functionality to set and get the profile
        characterization data.
      . Add methods to create a profile using CdClient with a CdIcc
        object.
    - List the required parameters in the 'colormgr --help' output.
    - Remove the AlwaysUseXrandrName config option and auto-detect
      it at runtime.
    - Show the viewing conditions when dumping the ICC profile.
  + Bugs fixed:
    - Add a quirk for ThinkPads so that we show 'ThinkPad T510'
      rather than '4384BR2'.
    - Add optional installed tests.
    - Allow colormgr to take an object path or an ID as input.
    - Allow the user to specify a non-qualified path when using
      FindProfileByFilename.

-------------------------------------------------------------------
Mon Jul  8 07:46:10 UTC 2013 - dimstar@opensuse.org

- Update to version 1.0.2:
  + New Features:
    - Add cd_icc_save_data() so that we can easily set
      _ICC_PROFILE.
    - Add CdIccStore to monitor directories of ICC profiles.
    - Add SystemVendor and SystemModel properties to the main
      interface.
  + Bugfixes:
    - Allow to specify a non-qualified path when using
      FindProfileByFilename.
    - Allow using the key 'Filename' when using
      FindProfileByProperty.
    - Always return the error if any sync method failed.
    - Fix GObject introspection when getting lists.
    - Fix GObject introspection when getting metadata.

-------------------------------------------------------------------
Sun Jun 16 10:36:57 UTC 2013 - zaitor@opensuse.org

- Update to version 1.0.1:
  + Add 0.1.34 to 1.0.0 deprecated methods to preserve ABI.
  + Do not unconditionally enable BPC on the color transform.
  + Fix profile created time for non-UTC timezones.
  + Record the gamma table in the session helper error message.

-------------------------------------------------------------------
Wed May 22 12:45:35 UTC 2013 - dimstar@opensuse.org

- Move %glib2_gsettings_schema_post from %pre to %post: if we
  execute this prior to installation, the schema will not be
  registered, as the files are not yet in place.

-------------------------------------------------------------------
Mon May 13 18:14:57 UTC 2013 - dimstar@opensuse.org

- Update to version 1.0.0:
  + New Features:
    - Add a config option for monitors with identical EDID values.
    - Add API to control the use of BPC in CdTransform.
    - Add a simple BGRA32 pixel format.
    - Add a simple CMYK32 pixel format.
    - Add a simple colord.conf manpage.
    - Allow a different input and output format in CdTransform.
    - Show all the translations when dumping an ICC profile.
  + Bugfixes:
    - Add some missing G_BEGIN_DECLS/G_END_DECLS in header files.
    - Always return an error if cd_main_device_add() failed.
    - Build all installed binaries with PIE.
    - Build the colord binary with full RELRO.
    - Do not show a warning when using 'colormgr
      device-get-profile-for-qualifier'.
    - Ensure the parent directories exist when calling
      cd_icc_save_file.
    - Fix crash in cd-iccdump by working around an lcms2 bug.
    - Fix using the ColorHug color sensor on ARM hardware.
    - Fix using the Huey color sensor on ARM hardware.
    - Set the STANDARD_space metadata for the print profiles.
    - Use G_GNUC_WARN_UNUSED_RESULT in public and private headers.
    - Use the same pixel format names as Cairo and the same
      in-memory value as lcms2.

-------------------------------------------------------------------
Wed May  1 19:33:55 UTC 2013 - dimstar@opensuse.org

- Update to version 0.1.34:
  + New Features:
    - Add a ICC transform object for simple RGB conversions.
    - Add an example for using CdIcc in applications.
    - Add an internal program to scan a directory of ICC profiles
      for warnings.
    - Add a warning for RGB profiles with unlikely whitepoint
      values.
    - Add a webservice URI example that can upload a profile to the
      Internet.
    - Add device metadata OutputEdidMd5 so we can build a UCMM shim
      layer.
    - Add functionality to return the response of the CdIcc profile
      object.
    - Add getting and setting the VCGT table in CdIcc.
    - Add new systemd macros to the example spec file.
    - Add Qt DBus annotations.
  + Bugfixes:
    - Allow clients to call org.freedesktop.DBus.Peer.
    - Correct a lot more company names when creating devices.
    - Do not automatically add EDID profiles with warnings to
      devices.
    - Fix building RGB working space profiles when using
      OpenBSD/sparc64.
    - Fix standard-space property name into a compilable name.
    - Increase the delay between patches in the session-helper.
    - Install the bash completion support into /usr.
- Add pkgconfig(bash-completion) BuildRequires: allow configure to
  detect where to install the bash completion.

-------------------------------------------------------------------
Tue Apr 16 14:53:42 UTC 2013 - dimstar@opensuse.org

- Update to version 0.1.33:
  + New Features:
    - Add some profile descriptions for the CMYK profiles.
    - Add the FOGRA45L and FOGRA47L CMYK profiles.
    - Include the eciRGBv1 gamma 1.8 profile.
    - libcolord: Add cd_it8_set_enable_created.
    - libcolord: Add helpers for int and double values from the
      DOM.
  + Bugfixes:
    - Add ifdef for cmsGetToneCurveEstimatedTableEntries.
    - Build the print profiles from XML descriptions.
    - Check the generated CCMX matrix for invalid data.
    - Do not print a warning if the DBus property does not exist.
    - Ensure mbstowcs() has an LC_CTYPE of 'en_US.UTF-8'.
    - libcolord: Always write C-locale floating point values in IT8
      files.
    - libcolord: Initialize the value of the CCMX matrix.
    - libcolord: Return the correct result from
      cd_mat33_matrix_multiply.
    - Never promote localized v2 ICC profiles to v4.
    - Rename ISOnewspaper26 to IFRA26S_2004_newsprint.
  + Updated translations.

-------------------------------------------------------------------
Fri Mar 29 08:49:11 UTC 2013 - dimstar@opensuse.org

- Update to version 0.1.32:
  + New Features:
    - Add a new tool 'cd-iccdump' that can dump V4 and V2 profiles.
    - Add translated descriptions to the ICC profiles.
    - libcolord:
      . Add an object which is a named colord.
      . Add an object to factor out the profile load and save.
      . Add a really simple XML DOM extractor.
      . Add some helpers for dealing with CdColorLab objects.
    - Translate some of the profile source XML file descriptions
      and licences.
    - Use an XML source format for the generated profiles.
  + Bugfixes:
    - libcolord: Correctly copy CdColorYxy->Y when used as a
      property.
    - lib: Fix the licence boilerplate in the sensor libs.
    - Set the default profile locale to be en_US, not EN_us.
    - Use gtkdocize --copy in autogen.sh

-------------------------------------------------------------------
Mon Mar 18 18:40:44 UTC 2013 - dimstar@opensuse.org

- Update to version 0.1.31:
  + New Features:
    - Add more sensor capabilities to support the latest ArgyllCMS
      release.
    - Calculate the display calibration based on the Lab and target
      display gamma.
    - Emulate a perfect sRGB screen when returning XYZ values from
      the dummy sensor.
    - Interpolate the gamma data to the VCGT size using Akima.
    - libcolord: Add Akima and Linear 2D interpolation classes.
    - libcolord: Switch CdColor to using the GSlice allocator.
    - libcolorhug: Add commands to get the ADC Vref+ and Vref-.
    - libcolorhug: Add extensions to the take_reading_x() commands
      to set the sensor type.
    - libcolorhug: Add the ability to get and set the CCD
      calibration values.
    - libcolorhug: Add the ability to get a spectral reading from
      the device.
    - Run the self test programs in 'make check' under valgrind.
  + Bugfixes:
    - Add a warning if compiling with --with-daemon-user=root.
    - Add some more display vendor names to the display fixup
      table.
    - Deprecate both the cd_profile_set_$foo_sync() functions.
    - Do not show a critical warning if an unmatched sensor is
      connected.
    - Fix build on OpenBSD.
    - Fix compile with --disable-gusb.
    - Fix the argyll sensor driver when using the ColorMunki Smile.
    - Fix the gamut warning to check primaries wider than CIERGB
      and ProPhoto.
    - Fix unusual crash in cd_main_get_cmdline_for_pid.
    - Guess the option type when using 'colormgr
      sensor-set-options'.
    - libcolord: ArgyllCMS uses 'YES' for IT8 options.
    - libcolord: Fix two small memory leaks when getting details
      about a sensor.
    - Move the private sensor libraries out of the pure lib space.
    - Rename the colormgr 'profile-set-$foo' commands to
      'profile-set-property'.
    - Return an error if the client tries to change the profile
      filename after creation.
    - Set the target gamma when using the session-helper.
    - Setup the devices for another embedded Huey colorimeter and
      the original Spyder.
- Drop colord-privlib.patch: fixed upstream.
- Remove gnome-common BuildRequires and call to gnome-autogen.sh,
  as we don't carry any patch touching the build system anymore.
- Add post/postun scriptlets to libcolorhug1 subpackage.

-------------------------------------------------------------------
Wed Feb 27 12:11:08 UTC 2013 - dimstar@opensuse.org

- Update to version 0.1.30:
  + New features:
    - Load the instrospection to the colord binary as a GResource
    - Save the common ICC profiles as GResources in the colord
      binary to reduce I/O
    - Support setting the blue LED in the ColorHug Spectro
  + Bugfixes:
    - Append -private to the driver libraries as they have no
      headers installed
    - cd_sensor_get_caps() returns a bitfield, so make it
      explicitly 64 bits wide
    - Do not expect a system proxy when checking if the daemon
      exists
    - Do not remove the database files when upgrading the package
    - Do not show duplicate profiles when icc-profiles-openicc is
      installed
    - Fix Colord-1.0.gir build with --no-add-needed
    - Fix linking of ch-self-test
    - Fix symbol-prefix passed to g-ir-scanner
    - Fix up the model name for the ColorMunki
    - Skip more self tests if the daemon could not be started
- Changes from version 0.1.29:
  + New Features:
    - Add an interface for plugins to decline to load
    - Add a --verbose and --version argument to colormgr
    - Add DTP94 native sensor support
    - Add the 'Plasma' sensor capability
    - Allow profiles to have a 'score' which affects the standard
      space
    - Detect profiles from adobe.com and color.org and add metadata
    - Install libdtp94 for access to the DTP94 colorimeter
    - Install libhuey for access to the Huey colorimeter
    - Install libmunki for access to the ColorMunki Photo hardware
    - Move libcolorhug from colorhug-client for access to the
      ColorHug colorimeter
    - Reintroduce SANE support
    - session-helper:
      . Return extra data from the calibration in the Finished
        signal
      . Return the correct sensor images when calibrating
  + Bugfixes:
    - Allow the user to specify the device type when using
      'colormgr create-device'
    - Change the Adobe RGB description to be 'Compatible with Adobe
      RGB (1998)'
    - Do not auto-add profiles due to device-id metadata if they
      have been manually removed
    - Do not include the size of the NULL byte when writing data
      from CCMX files
    - Do not log a critical warning if the daemon is replaced at
      runtime
    - Do not make the libsystemd-login dep automatic
    - Do not return an error if a user manually adds a profile that
      has already been automatically added
    - Don't emit a warning if the profile warnings or owner changes
    - Ensure profiles with MAPPING_device_id get auto-added to
      devices
    - Fix timezone problem in colord_client_random_func test
    - Include cd-buffer.c in libcolordprivate for future use
    - Make libcolord/device_async test pass everywhere
    - Return an error if a client tries to create a device of an
      unknown type
    - Set the additional 'OwnerCmdline' metadata on each device
    - Show all the possible capabilities on one line when doing
      'colormgr get-sensors'
    - Specify the sensor caps in the code for native sensors
    - Split the libcolord.so into libcolordprivate.so so it can be
      used without a GObject dep
    - Write the CdIt8 'CREATED' date string in all files
- Changes from version 0.1.28:
  + New Features:
    - Add some default GSetting schema values for the calibration
      helper
    - Add a Sensor.Metadata property
    - - Add the sensor images as metadata on the D-Bus interface
  + Bugfixes:
    - Quit the session helper if the device or sensor was not found
    - Never build more than one print profile at a time
    - Don't use the deprecated INCLUDES in Makefile.am
- Changes from version 0.1.27:
  + New Features:
    - Add ColorMunki Smile defines and calibration attach image
    - Add Spyder4 calibration attach image
    - Add the ability to generate Rec. 709 gamma curves
    - Export a Device.Embedded property that is set for fixed
      hardware
    - Import shared-color-profiles into colord
    - Install a header with all the session helper defines
    - Support L* gamma encoding in cd-create-profile
    - Write the profile quality into to the .icc file as metadata
  + Bugfixes:
    - Allow passing no value as properties to CreateDevice
    - Do not return zero profiles when the device is being
      calibrated or disabled
    - Ensure the color types are methods in GObject Introspection
      rather than functions
    - Fix build when srcdir != builddir
    - Fix floating point number parsing in non C locale
      environments
    - Remove 'Monitor' suffix from display devices model string.
- Add colord-privlib.patch: Move private libraries out of
  %{_libdir}.
- Add gnome-common BuildRequires and call to autogen.sh, as above
  patch touches the build system.

-------------------------------------------------------------------
Mon Feb 18 15:10:01 UTC 2013 - abergmann@novell.com

- Adjusted last editions to AppAmor profile (bnc#803281):
  + Replaced
    - @{HOME}/.local/share/color/*.icc r
    with
    - @{HOME}/.local/share/color/icc/*.icc r
  + Added
    - allow reading all /sys/class/video4linux/ r

-------------------------------------------------------------------
Mon Feb 18 08:16:46 UTC 2013 - meissner@suse.com

- Additions to the AA profile (bnc#803281)
  + allow /proc/*/cgroup r (unkown why).
  + allow reading all /sys/class/video4linux/** r (video4linux
    devices).
  + allow user local ICC files:
    - @{HOME}/.local/share/icc/*.icc r
    - @{HOME}/.local/share/color/*.icc r

-------------------------------------------------------------------
Fri Jan 11 11:00:10 UTC 2013 - meissner@suse.com

- allow /usr/share/mime/** readable in AA profile (bnc#797907)

-------------------------------------------------------------------
Thu Dec 20 08:16:40 UTC 2012 - dimstar@opensuse.org

- Update to version 0.1.26:
  + New Features:
    - Add 4 more defined sensor types.
    - Add a create-temperature subcommand to colormgr to test VCGT
      generation.
    - Add a 'SensorId' property to the sensor interface.
    - Add a session helper that can be used to calibrate the screen
    - Add cd_it8_save_to_data() to save the data to some allocated
      memory.
    - Add FindSensorById() to the main interface.
    - Add some defines for the Spyder4 display colorimeter.
    - Add some device figures from gnome-color-manager used in KDE
      and GNOME.
    - Add some example calibration ti1 files from
      gnome-color-manager.
    - Add support for reading and writing .cal files to CdIt8.
    - Add the ability to 'disable' a device so that color
      management can be turned off.
    - Export cd_color_rgb_interpolate() as it's useful to
      applications.
    - Recognise the internal sensor on W700 laptops and set a
      property for the calibration tools.
    - Use spotread when there is no native sensor driver.
  + Bugfixes:
    - Add some missing entries in cd_sensor_kind_from_string.
    - Create ICCv2 profiles when using cd-create-profile.
    - Do 3 reads in quick succession for colormgr
      get-sensor-reading.
    - Fix a crash when saving a ti3 file where white is not the
      last sample.
    - Fix a critical warning when writing using cd_it8_add_data()
      with no XYZ value.
    - If ti1 values are > 1.0 then assume they are normalized.
    - Return class specific error codes if authentication fails.
    - Scale the ti3 RGB values to 100 when writing with
      NORMALIZED_TO_Y_100.
    - Set DEVICE_CLASS when saving a cal IT8 file.
    - Support doing sensor user actions when using 'colormgr
      get-sensor-reading'.
    - Update the device scope if it changes at runtime.
    - Use enumerated error values in the client library.

-------------------------------------------------------------------
Thu Nov 29 08:33:29 UTC 2012 - dimstar@opensuse.org

- Update to version 0.1.25:
  + New Features:
    - Add a create-standard-space sub-command to cd-create-profile.
    - Add a FAQ entry describing application support of color
      management.
    - Add a 'make coverity' helper to scan the project for errors.
    - Add a profile metadata key of 'License'.
    - Add a profile warning if any of the primaries are outside of
      ROMM RGB.
    - Add a set-version command to the cd-fix-profile command line
      tool.
    - Add a warning if the profile calibration data is
      non-monotonic.
    - Add a warning if the profile copyright is missing.
    - Add a warning if the profile description is missing.
    - Add a warning if the profile gray axis is invalid.
    - Move the named color examples to shared-color-profiles.
    - Print if the profile is system-wide when doing 'colormgr
      get-profiles'.
    - Show the primaries when dumping the profile using
      cd-fix-profile.
    - Use syslog to be able to debug what the daemon is doing
      without restarting it.
  + Bugfixes:
    - Check the return value of mbstowcs before using the buffer.
    - Convert cd-create-profile to using sub-commands to make it
      more modular.
    - Create linear vcgt tables when using create-x11-gamma to
      match the xserver behaviour.
    - Create version 2.2 ICC files when creating named color
      profiles.
    - Do not ever manually set a ICC profile version when creating
      profiles.
    - Do not try to connect to colord in cd-fix-profile until
      actually needed.
    - Don't optimize the profile check transforms to speed up
      daemon startup.
    - Don't set the StandardSpaces override, the generated profiles
      have the correct metadata now.
    - Fix a crash in the example code if the device has a
      non-standard qualifier format.
    - Fix GetStandardSpace so it can actually work.
    - huey: Ensure we return an error if we ran out of retries.
    - If the copyright string is not set when creating a profile
      use a good default.
    - Improve the formatting of 'get-profiles' and 'get-devices'.
    - libcolord: Fix up a warning if GetStandardSpace fails to find
      a profile.
    - Return an error if the client does not set a profile or
      device id.
    - Return an error if the client uses an unsupported scope
      value.
    - Set a default copyright string when creating profiles without
      using --copyright.

-------------------------------------------------------------------
Wed Oct 31 20:53:05 UTC 2012 - dimstar@opensuse.org

- Update to version 0.1.24:
  + New Features:
    - Add a extract-vcgt subcommand to cd-fix-profile.
    - Add a general plugin interface for adding and removing
      devices.
    - Add defines for the 'ColorHug Spectro' hardware.
    - Add a 'seat' property to each device.
    - Add FindProfileByProperty() to the main interface.
    - Allow the user to specify a custom udev rules directory.
  + Bugfixes:
    - Append usernames to dbus object paths before sanitising the
      object path.
    - colorhug:
      . Add support for firmware >= 1.2.0 by accepting a full HID
        buffer.
      . Update the private files to the latest libcolorhug code.
    - Fix a critical warning when user tries to dump a non-icc
      file.
    - Fix automatic dep on libusb and vala.
    - Fix a warning in the daemon if a device property is NULL at
      setup.
    - Initialise global connection variable earlier.
    - More paranoia in construction of object paths.
    - Never use Werror by default in configure.
    - Remove libsane support and rely only on udev for scanner
      device information.
    - Set FILE_checksum on discovered system profiles.
    - Set the seat for devices created in the session and from
      udev.
- Drop sane-backends-devel BuildRequires: no longer needed.
- Add pkgconfig(libsystemd-login) BuildRequires: new dependency.

-------------------------------------------------------------------
Wed Oct 17 11:10:24 UTC 2012 - fcrozat@suse.com

- Fix build with new udev rules directory location.

-------------------------------------------------------------------
Tue Sep 18 18:28:50 UTC 2012 - dimstar@opensuse.org

- Update to version 0.1.23:
  + New Features:
    - Get udevrulesdir from pkg-config
  + Bugfixes:
    - Assorted documentation fixes
    - Do not try to add duplicate sysfs devices
- Changes from version 0.1.22:
  + New Features:
    - Add a Vala version of cd-gtk-demo
    - Split out colord-gtk to a new sub-project to prevent a dep
      loop
  + Bugfixes:
    - Add many generic introspection type arguments
    - Check any files in /usr/share/color/icc have the content type
      application/vnd.iccprofile
    - Do not try to create the same object paths if two sensors of
      the same type are plugged in
    - Fix the udev rules entry for the i1Display3.
- Drop all colord-gtk related things (split in an own package with
  own tarball):
  + colord-gtk.spec, colord-gtk.changes
  + subpackages libcolord-gtk1, libcolord-gtk-devel and
    typelib-1_0-ColordGtk-1_0. No obsoletes added, as they will
    appear in their form from the new package, based on colord-gtk
    tarballs, again.
  + Remove libcolord-gtk1 from baselibs.conf.
- Drop pre_checkin.sh: as this is now a simple package, there is no
  need for a pre_checkin script anymore.

-------------------------------------------------------------------
Thu Jul  5 14:47:17 UTC 2012 - meissner@suse.com

- Add a apparmor profile for usr.lib.colord

-------------------------------------------------------------------
Wed May 23 19:18:54 UTC 2012 - zaitor@opensuse.org

- Update to version 0.1.21:
  + Do not add sensors that are ignored or have no caps.
  + Do not install any parts of colord-sane if --disable-sane is
    specified.
  + Do not use 'WantedBy=graphical.target' in the shipped systemd
    file.
  + Fix autotools when configuring without systemd.
  + Fix InstallSystemWide() by not writing a private file.
  + Fix srcdir != builddir with introspection enabled.
  + Fix the description in the systemd service file.
  + Isolate gtk dependency to cd-convert.
  + Save the CCMX and ITx files to be compatible with argyllcms
  + The ColorHug has a new VID and PID.
- Drop colord-build-no-gtk.patch, fixed upstream.
- Removed call to gnome-autogen.sh and drop gnome-common
  buildrequires, only needed for above dropped patch.

-------------------------------------------------------------------
Mon May 14 09:53:20 UTC 2012 - vuntz@opensuse.org

- Update to version 0.1.20:
  + New Features:
    - Add a bash completion file for colormgr
    - Add a BUSY state value for sensor devices
    - Add a GObject Introspection example
    - Add a sensor-set-options command to the colormgr tool
    - Add async and sync methods in libcolord to support sensor
      options
    - Add CdIt8 as a helper for reading and writing ti1, ti3 and
      ccmx files
    - Add cd_it8_utils_calculate_ccmx() to libcolorhug
    - Add CdSampleWindow to libcolord-gtk
    - Add CdWindow which allows us to get the color profile for a
      GtkWidget
    - Add functionality to colord-convert to sample ti1 -> ti3
      files
    - Add gio-2.0 to the requires line of colord.pc for GFile
    - Add the concept of 'options' on each color sensor device
    - colorhug: Allow saving the remote hash as a sensor option
    - Print any sensor options when doing 'colormgr get-sensors'
  + Bugfixes:
    - colorhug: Save the EEPROM after setting sensor options
    - Enable gtk-doc in the default distro build
    - Fix build failure when colord is not installed system-wide
- Add colord-build-no-gtk.patch: fix build without GTK+.
- Add gnome-common BuildRequires and call to gnome-autogen.sh,
  needed for above patch.
- Enable the build of colord-gtk, by creating a colord-gtk.spec
  based on colord.spec (with pre_checkin.sh). We do it this way to
  avoid a build loop between colord and gtk3, since gtk3 depends on
  colord. The differences are:
  + Add a pkgconfig(gtk+-3.0) BuildRequires.
  + Add colord and libcolord-devel BuildRequires, so we can use rpm
    to remove the files from colord.spec subpackages in %install
    (in order to only package colord-gtk files).
  + Create libcolord-gtk1, typelib-1_0-ColordGtk-1_0 and
    libcolord-gtk-devel subpackages.

-------------------------------------------------------------------
Wed Apr 18 07:31:39 UTC 2012 - vuntz@opensuse.org

- Update to version 0.1.19:
  + New Features:
    - Add a user suffix to the object path of user-created devices
      and profiles
  + Bugfixes:
    - Add User key to colord-sane's DBus service file
    - Do not enable PrivateNetwork=yes as it breaks hotplugging
      devices
    - Ensure colord-sane can create devices and profiles
    - Fix usage of CD_OBJECT_SCOPE_* enums
    - Honor aclocal flags
    - Remove the 'Default,' profile title prefix if legacy profiles
      are installed

-------------------------------------------------------------------
Thu Mar 15 19:29:33 UTC 2012 - vuntz@opensuse.org

- Update to version 0.1.18:
  + New Features:
    - Add a Manager.CreateProfileWithFd() method for QtDBus
    - Add the GAMUT_coverage metadata key to the spec
    - Add the GAMUT_volume metadata key to the spec
    - Depend on lcms2 >= 2.2
    - Make cd-fix-profile add the GAMUT keys to the ICC file
    - Split out the SANE support into it's own process
  + Bugfixes:
    - Do not delete 'disk' or 'normal' devices when the session
      exits
    - Ensure we return NULL for missing device properties
    - Fix a small leak when creating devices and profiles in
      clients
    - Fix cd-fix-profile to add and remove metadata entries
    - Install per-machine profiles in /var/lib/colord/icc
    - Show what DBus names have inhibited each device
    - When doing 'get-devices' show the profile ID and filename
- Add new colord-sane.service as argument to calls to
  %service_{add,del}_* macros.

-------------------------------------------------------------------
Mon Feb 27 13:24:10 UTC 2012 - vuntz@opensuse.org

- Fix systemd-related packaging:
  + Use %{?systemd_requires}.
  + Call %service_{add,del}_* macros in scriptlets for
    colord.service.

-------------------------------------------------------------------
Thu Feb 23 07:51:54 UTC 2012 - vuntz@opensuse.org

- Update to version 0.1.17:
  + New Features:
    - Add an LED sample type
    - Add a metadata key to store the calibration brightness
    - Show the profile title when using colormgr get-profiles
  + Bugfixes:
    - Add PrivateNetwork and PrivateTmp to the systemd service file
    - Don't leak a GVariantIter when setting the device metadata
    - Fix a critical warning if a client tries to get the profile
      metadata
    - Fix InstallSystemWide() when running as the colord user
    - Increase the colorhug sample timeout to 5 seconds
    - Make underscores into spaces for the profile title
    - Return from cd_profile_has_access() with TRUE for virtual
      profiles
- Remove xz BuildRequires now that it comes for free in the build
  system.

-------------------------------------------------------------------
Wed Jan 18 10:47:23 UTC 2012 - vuntz@opensuse.org

- Add pkgconfig(gusb) BuildRequires to build with libgusb support,
  which matters even more now than libusb support is gone.

-------------------------------------------------------------------
Tue Jan 17 18:02:05 UTC 2012 - vuntz@opensuse.org

- Update to version 0.1.16:
  + New Features:
    - Add a device-inhibit command to the colormgr client
    - Add org.freedesktop.policykit.owner annotations to .policy
      file
    - Add profile metadata MAPPING_device_id for automatic profile
      mapping
    - Add some profile metadata keys
    - Install a systemd service file if systemd is used
    - Support 2nd generation Huey hardware
    - Use GUsb for the Huey sensor
  + Bugfixes:
    - Fix a Wformat error when printing a gsize
    - If /usr/share/color appears at runtime, don't rescan the
      parent dir
    - Set the colorimeter sensor group so the dameon can access the
      sensor
    - Split the spyder hardware into different types
- Add pkgconfig(systemd) BuildRequires, following upstream change,
  to know where to install the .service file.
- Remove pkgconfig(libusb-1.0) BuildRequires: the dependency is
  gone now.
- Drop colord-polkit-annotate-owner.patch: fixed upstream.
- Remove libtool BuildRequires and call to autoreconf and
  intltoolize, that were only needed for above patch.

-------------------------------------------------------------------
Thu Dec  8 20:25:09 UTC 2011 - dimstar@opensuse.org

- Split typelib file into typelib-1_0-Colord-1_0 subpackage.
- Add typelib-1_0-Colord-1_0 Requires to libcolord-devel
  subpackage.

-------------------------------------------------------------------
Tue Dec  6 16:06:22 UTC 2011 - vuntz@opensuse.org

- Run the colord daemon as user colord (bnc#698250):
  + Add colord-polkit-annotate-owner.patch: add
    org.freedesktop.policykit.owner annotations to policy file so
    that running as colord user works.
  + Add a %pre script to create the colord user and change
    ownership of /var/lib/colord.
  + Add pwdutils Requires(pre), to make sure we can create the
    user.
  + Pass --with-daemon-user=colord to configure.
  + Package /var/lib/colord with the right user.
  + Add libtool BuildRequires and calls to autoreconf and
    intltoolize, as needed by above patch.

-------------------------------------------------------------------
Tue Nov 29 21:27:11 UTC 2011 - dimstar@opensuse.org

- Update to version 0.1.15:
  + This release fixes an important security bug: CVE-2011-4349.
  + New Features:
    - Add a native driver for the Hughski ColorHug hardware
    - Export cd-math as three projects are now using it
  + Bugfixes:
    - Documentation fixes and improvements
    - Do not crash the daemon if adding the device to the db failed
    - Do not match any sensor device with a kernel driver
    - Don't be obscure when the user passes a device-id to colormgr
    - Fix a memory leak when getting properties from a device
    - Fix colormgr device-get-default-profile
    - Fix some conection bugs in colormgr
    - Fix some potential SQL injections
    - Make gusb optional
    - Only use the udev USB helper if the PID and VID have matches
    - Output the Huey calibration matrices when dumping the sensor

-------------------------------------------------------------------
Wed Nov 16 10:27:26 UTC 2011 - dimstar@opensuse.org

- Update to version 0.1.14:
  + New Features:
    - Add defines for the i1 Display 3
    - Add two more DATA_source values to the specification
    - Align the output from colormgr get-devices and get-profiles
    - Allow cd-fix-profile to append and edit new metadata
  + Bugfixes:
    - Ensure non-native device are added with no driver module
    - Split the sensor and device udev code
  + Updated translations.

-------------------------------------------------------------------
Fri Oct 28 14:31:58 UTC 2011 - lnussel@suse.de

- don't recommend colord from libcolord1 to prevent automatic
  installation (bnc#698250)

-------------------------------------------------------------------
Mon Oct  3 20:50:40 CEST 2011 - dimstar@opensuse.org

- Update to version 0.1.13:
  + New Features:
    - Add an 'Owner' property on device and profile objects
    - Add cd_profile_has_access() to filter profiles from other
      user accounts
    - Add the crayon named color palette
    - Add --xorg-gamma to cd-create-profile to create custom gamma
      ramps
  + Bugfixes:
    - Add a note in the naming specification about the username
      suffix
    - colormgr only needs one argument for find-device
    - Ensure remote DBus errors are registered at startup
    - Ensure uid 0 can always create devices and profiles
    - Fix an error in configure if there is no sane .pc file
    - Fix the --disable-polkit build
    - Documentation: cd_device_get_modified() returns microseconds
    - Reduce the CPU load of clients when assigning profiles from
      the session
    - Return an error if a client tries to create a duplicate
      device
    - Return an error when trying to register a duplicate profile

-------------------------------------------------------------------
Sat Sep 17 23:39:25 UTC 2011 - jengelh@medozas.de

- Remove redundant tags/sections from specfile

-------------------------------------------------------------------
Fri Sep  9 16:28:41 UTC 2011 - vuntz@opensuse.org

- Add baselibs.conf.

-------------------------------------------------------------------
Fri Sep  2 08:20:51 UTC 2011 - vuntz@opensuse.org

- Update to version 0.1.12:
  + New Features:
    - Add a configure argument --enable-volume-search
    - Add a configure argument of --enable-fd-fallback
    - Add cd_client_import_profile() to be able to easily import a
      GFile
    - Allow the daemon to run with a different user
  + Bugfixes:
    - Add daemon user to acl of sensor devices
    - Add lcms2 to Requires.private
    - Check if a file is really an ICC profile before importing it
    - Detect libusb_strerror in configure rather than relying on
      the version
    - Do not fail make check if there is no available local colord
      process to use
    - Ensure the profiles are sorted by their timestamp during
      login
    - Ensure the volume-sourced profiles are not marked as
      systemwide profiles
    - Exit with an error when trying to connect to a device that
      does not exist
    - Remove duplicate call to complete in libcolord
    - Try harder to use the ICC profile checksum
- Changes from version 0.1.11:
  + New Features:
    - Enable GObject introspection generation on libcolord
    - Generate a Vala API binding from the GObject Introspection
      GIR
    - Move the project home to freedesktop.org
    - Ship generated man pages in tarballs
  + Bugfixes:
    - Add all of the required GObject Introspection annotations
      required
    - Allow FindDeviceByProperty() to match on model, vendor and
      serial number
    - Don't crash the example program if there is no default
      profile assigned
    - Fix the bugzilla and mailing list links on the webpage
      (fdo#39129).
    - Fix the licence headers in colord.h and cd-color.h
    - Fix up some translatable strings
    - Honor ACLOCAL_FLAGS when running autoreconf
    - Use the const formatter when unwrapping GVariants to reduce
      memory allocation
  + Updated translations.
- Add gobject-introspection-devel and vala BuildRequires to build
  introspection data and vala bindings.
- Manually install pre-built man pages, since the build system
  cannot install them if docbook2man is not there (and we don't
  want to add a BuildRequires on it since it's big).

-------------------------------------------------------------------
Mon Jul 11 12:43:32 CEST 2011 - vuntz@opensuse.org

- Remove docbook-utils BuildRequires as an attempt to remove a
  build cycle in Factory.
- This means we lose man pages for now, but upstream will ship them
  pre-generated in tarballs in the future.

-------------------------------------------------------------------
Wed Jul  6 18:21:17 CEST 2011 - vuntz@opensuse.org

- Update to version 0.1.10:
  + New Features:
    - Add a find-profile-by-filename command to the colormgr client
      tool
    - Add the object scope to the DBus interface as a property
    - Write a document detailing the colord security attack surface
  + Bugfixes:
    - Actually store the device ID in the mapping database
    - Fix include statements to search from current libcolord
      folder
    - Fix mbstowcs usage
    - Fix the build for old versions of lcms2
    - Fix up the location of the libcolord header files
    - Remove the DBus annotations in the introspection

-------------------------------------------------------------------
Mon Jul  4 15:31:22 CEST 2011 - vuntz@opensuse.org

- Drop rpmlintrc as bnc#698250 got fixed and
  suse-dbus-unauthorized-service/polkit-unauthorized-privilege
  warnings are now gone.

-------------------------------------------------------------------
Fri Jun 17 00:33:14 CEST 2011 - vuntz@opensuse.org

- Update to version 0.1.9:
  + New Features:
    - Add a 'Format' property to the device interface
    - Add a new method Client:FindDeviceByProperty for when only a
      property is known
    - Add methods to get the connected state of each object
    - Define the DATA_source profile metadata item
    - Define three metadata keys for the framework creator to set
    - Define two keys to allow the profile to contain the mapping
      parameters
  + Bugfixes:
    - Allow GUDEV to be disabled at compile time
    - Autodetect SANE in configure
    - Fix 3 small memory leaks
    - Fix a bug that caused a critical warning in client code
    - Only warn if we fail to get the PolicyKit authority
    - Save any additional disk device metadata in the property
      database
    - Use upstream gettext instead the glib one
    - Write the new metadata entries in the utility programs
- Add xz BuildRequires because we can't build a package for a
  xz-compressed tarball without explicitly specifying that... See
  bnc#697467 for more details.

-------------------------------------------------------------------
Thu Jun 16 16:51:34 CEST 2011 - vuntz@opensuse.org

- Add docbook-utils BuildRequires to build man pages.
- Add colord Recommends to libcolord1 as the library is not too
  useful without the daemon.
- Add shared-color-profiles Requires to colord, as we want to have
  profiles.

-------------------------------------------------------------------
Mon Jun  6 13:46:22 UTC 2011 - dimstar@opensuse.org

- Initial package, version 0.1.8.

Places

File colord.changes of Package colord (Revision 4e958180da2a86783800313b49334bb2)

Places