openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File glibc.spec of Package glibc (Revision a34e9abb9d87eb312358dbe2ecee5243)

Currently displaying revision a34e9abb9d87eb312358dbe2ecee5243 , Show latest

#
# spec file for package glibc
#
# Copyright (c) 2012 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.

# Please submit bugfixes or comments via http://bugs.opensuse.org/
#

%define crypt_bf_version 1.2

Name:           glibc
Summary:        Standard Shared Libraries (from the GNU C Library)
License:        LGPL-2.1+ and SUSE-LGPL-2.1+-with-GCC-exception and GPL-2.0+
Group:          System/Libraries
BuildRequires:  gcc-c++
BuildRequires:  libselinux-devel
BuildRequires:  libstdc++-devel
%define _filter_GLIBC_PRIVATE 1
%define build_locales 1
%define run_testsuite 0
%define disable_assert 0
%define enable_stackguard_randomization 1
%ifarch ppc ppc64
 %define optimize_power 1
 %ifarch ppc
 %define powerpc_optimize_base power3
 %define powerpc_optimize_tune power3
 %define powerpc_optimize_cpu_power4 1
 %else
 %define powerpc_optimize_base power4
 %define powerpc_optimize_tune power5
 %define powerpc_optimize_cpu_power4 0
 %endif
 # We are not building Power CPU specific optimizations for openSUSE.
 %define powerpc_optimize_cpu_power6 0
 %define powerpc_optimize_cpu_power7 0
 %define powerpc_optimize_cpu_cell 0
%else
 %define optimize_power 0
 %define powerpc_optimize_base 0
 %define powerpc_optimize_cpu_power4 0
 %define powerpc_optimize_cpu_power6 0
 %define powerpc_optimize_cpu_power7 0
 %define powerpc_optimize_cpu_cell 0
%endif # ppc, ppc64
%ifarch x86_64
# 2.6.32 is the SLES 11 SP1 kernel
# 2.6.34 is the openSUSE 11.3 kernel
%define enablekernel 2.6.32
%else
# 2.6.16 is the SLES 10 kernel, use this as oldest supported kernel
%define enablekernel 2.6.16
%endif
# ngpt was used in 8.1 and SLES8
Obsoletes:      ngpt < 2.2.2
Obsoletes:      ngpt-devel < 2.2.2
Provides:       ngpt = 2.2.2
Provides:       ngpt-devel = 2.2.2
Conflicts:      kernel < %{enablekernel}
# bug437293 - handle update from SLES10 on PowerPC
%ifarch ppc64
Obsoletes:      glibc-64bit
%endif
%ifarch ppc
Obsoletes:      glibc-32bit
%endif
Version:        2.15
Release:        0
%define git_id 2ba92745c36e
%define glibc_ports_ver 2.15
%define ports_git_id 8a70b2dcabbf
Url:            http://www.gnu.org/software/libc/libc.html
BuildRoot:      %{_tmppath}/%{name}-%{version}-build
Source:         glibc-%{version}-%{git_id}.tar.bz2
%define glibc_ports_dir glibc-ports-%{glibc_ports_ver}
Source2:        glibc-ports-%{glibc_ports_ver}-%{ports_git_id}.tar.bz2
Source3:        noversion.tar.bz2
Source4:        manpages.tar.bz2
Source8:        nsswitch.conf
Source9:        nscd.init
Source10:       bindresvport.blacklist
Source12:       glibc_post_upgrade.c
Source15:       glibc.rpmlintrc
Source16:       baselibs.conf
# For systemd 
Source20:       nscd.conf
Source21:       nscd.service
Source22:       nscd.socket
#
Source50:       http://www.openwall.com/crypt/crypt_blowfish-%{crypt_bf_version}.tar.gz
Source51:       http://www.openwall.com/crypt/crypt_blowfish-%{crypt_bf_version}.tar.gz.sign

Requires(pre):  filesystem
Recommends:     glibc-extra
Provides:       rtld(GNU_HASH)
BuildRoot:      %{_tmppath}/%{name}-%{version}-build
%if %_target_cpu == "i686"
# We need to avoid to have only the src rpm from i686 on the media,
# since it does not work on other architectures.
NoSource:       0
%endif
#
# PATCH-FIX-OPENSUSE remove lfs test from testsuite aj@suse.de
Patch0:         glibc-testsuite.patch
# PATCH-FIX-OPENSUSE handle glibc binaries
Patch1:         glibc-2.3.90-noversion.diff
# PATCH-FIX-OPENSUSE reload /etc/resolv.conf on change
Patch3:         glibc-resolv-reload.diff
# PATCH-MISSING-TAG -- See http://en.opensuse.org/openSUSE:Packaging_Patches_guidelines
Patch4:         glibc-2.3.locales.diff.bz2
# PATCH-FEATURE-OPENSUSE -- add crypt_blowfish support - bnc#700876
Patch5:         glibc-2.14-crypt.diff
# PATCH-FEATURE-OPENSUSE -- use separate symbol version for Owl extensions - lnussel@suse.de
Patch6:         glibc-2.14-crypt-versioning.diff
# PATCH-FIX-OPENSUSE add some extra information to version output - kukuk@suse.de
Patch7:         glibc-version.diff
# PATCH-MISSING-TAG -- See http://en.opensuse.org/openSUSE:Packaging_Patches_guidelines
Patch8:         glibc-2.4.90-revert-only-euro.diff
# PATCH-MISSING-TAG -- See http://en.opensuse.org/openSUSE:Packaging_Patches_guidelines
Patch12:        glibc-2.3.2.no_archive.diff
# PATCH-MISSING-TAG -- See http://en.opensuse.org/openSUSE:Packaging_Patches_guidelines
Patch14:        glibc-2.3.90-bindresvport.blacklist.diff
# PATCH-MISSING-TAG -- See http://en.opensuse.org/openSUSE:Packaging_Patches_guidelines
Patch16:        glibc-2.4.90-no_NO.diff
# PATCH-MISSING-TAG -- See http://en.opensuse.org/openSUSE:Packaging_Patches_guidelines
Patch20:        glibc-2.4-china.diff
# PATCH-FIX-OPENSUSE Fix gb18030 code bnc#54080
Patch21:        gb18030.patch.bz2
# PATCH-FIX-OPENSUSE Handle timestamp, adjust nscd.conf
Patch22:        glibc-2.4.90-nscd.diff
# PATCH-FIX-OPENSUSE Fix path for nscd databases
Patch23:        glibc-2.3.3-nscd-db-path.diff
# PATCH-FIX-OPENSUSE prefer -lang rpm packages
Patch25:        glibc-2.3.90-langpackdir.diff
# PATCH-FIX-OPENSUSE Fix hangs in UDP RPC calls bso#5379 bnc#257745 aj@suse.de
Patch28:        glibc-2.2-sunrpc.diff
# PATCH-FIX-OPENSUSE Do not generate hardlink for getconf
Patch29:        glibc-2.8-getconf.diff
# PATCH-FIX-OPENSUSE only use ipv6 if real ipv6 address exists bnc#361697, bnc#684534
Patch30:        getaddrinfo-ipv6-sanity.diff
# PATCH-MISSING-TAG -- See http://en.opensuse.org/openSUSE:Packaging_Patches_guidelines
Patch33:        glibc-compiled-binaries.diff
# PATCH-MISSING-TAG -- See http://en.opensuse.org/openSUSE:Packaging_Patches_guidelines
Patch36:        glibc-no-unwind-tables.diff
# PATCH-FEATURE-SLE increase cpusetsize to 4096, needs to be kept for compatibility kukuk@suse.de
Patch38:        glibc-cpusetsize.diff
# PATCH-FIX-OPENSUSE - Allow compilation with -altivec aj@suse.de
Patch41:        glibc-uio-cell.diff
# PATCH-MISSING-TAG -- See http://en.opensuse.org/openSUSE:Packaging_Patches_guidelines
Patch45:        glibc-gai-private4.diff
# PATCH-MISSING-TAG -- See http://en.opensuse.org/openSUSE:Packaging_Patches_guidelines
Patch46:        glibc-resolv-mdnshint.diff
# PATCH-MISSING-TAG -- See http://en.opensuse.org/openSUSE:Packaging_Patches_guidelines
Patch47:        glibc-nscd-hconf.diff
# PATCH-MISSING-TAG -- See http://en.opensuse.org/openSUSE:Packaging_Patches_guidelines
Patch49:        glibc-fini-unwind.diff
# PATCH-FIX-OPENSUSE bnc#657627
Patch52:        glibc-elf-localscope.diff
# FIX-OPENSUSE compile some files with -fno-strict-aliasing
Patch58:        glibc-strict-aliasing.diff
# PATCH-FIX-OPENSUSE disable rewriting ::1 to 127.0.0.1 for /etc/hosts bnc#684534, bnc#706719
Patch65:        glibc-fix-double-loopback.diff
# PATCH-FEATURE-OPENSUSE Revert sunrpc removal aj@suse.de
Patch66:        glibc2.14-revert-sunrpc-removal.patch
# PATCH-FIX-OPENSUSE revert seeking on fclose for now bnc#711829 matz@suse.de 
Patch67:        glibc-revert-fseek-on-fclose.diff
# PATCH-FIX-OPENSUSE Fix crash (access-after-free) in dl_lookup_x bnc#703140 matz@suse.de
Patch68:        glibc-fix-lookup-crash.patch
# PATCH-FIX-OPENSUSE Do not trigger an abort when an i586 Intel CPU is running the i686 library, as valgrind does. bnc#681398 aj@suse.de
Patch71:        x86-cpuid-level2.patch
# PATCH-FIX-UPSTREAM Fix assertion error in res_query.c (bso#13013)
Patch73:        glibc-resolv-assert.diff
# PATCH-FIX-OPENSUSE Run ctors (bnc#717671) aj@suse.de
Patch74:        glibc-2.14-fix-ctors.patch
# PATCH-FIX-OPENSUSE Fix missing declarations
Patch75:        glibc-2.15-nss_db-declarations.patch
# PATCH-FEATURE-OPENSUSE -- add sha support to crypt_blowfish lnussel@suse.de
Patch80:        crypt_blowfish-1.2-sha.diff
# PATCH-FEATURE-OPENSUSE -- use separate symbol version for Owl extensions - lnussel@suse.de
Patch81:        crypt_blowfish-1.2-versioning.diff
# PATCH-FIX-OPENSUSE Avoid build failure on noexecstack marker on ARM dmueller@suse.de
Patch82:        crypt_blowfish-1.2-hack_around_arm.diff
# PATCH-FIX-OPENSUSE avoid false positive warning that triggers brp postcheck fail
Patch84:        nscd-avoid-gcc-warning.diff
# PATCH-FIX-OPENSUSE fixed build-compare by omitting one more date - meissner@suse.de
Patch87:        glibc-nodate.patch
# PATCH-FIX-OPENSUSE revert pthread-cond-wait change since it causes hangs - aj@suse.de
Patch88:        pthread-cond-wait-revert.patch
# PATCH-FIX-UPSTREAM Fix realloc usage in vfscanf - aj@suse.de
Patch89:        glibc-2.16-scanf.patch
# PATCH-FIX-UPSTREAM Fix getcontext on 32-bit powerpc - aj@suse.de
Patch90:        glibc-ppc-getcontext.patch
# PATCH-FIX-UPSTREAM Fix ifunc relocations (bnc#740109) - aj@suse.de
Patch91:        glibc-ifunc-2.16.patch
# PATCH-FIX-OPENSUSE Remove netlink optimization (bnc#741021) - aj@suse.de
Patch92:        glibc-revert-netlink-cache.patch
# PATCH-FIX-UPSTREAM Fix tests for AVX features - aj@suse.de
Patch93:        glibc-2.16-avx.patch
# PATCH-FIX-UPSTREAM vfprintf: validate nargs and maybe allocate from heap bnc#747768 - aj@suse.de
Patch94:        vfprintf-nargs.patch

%description
The GNU C Library provides the most important standard libraries used
by nearly all programs: the standard C library, the standard math
library, and the POSIX thread library. A system is not functional
without these libraries.

%package info
Summary:        Info Files for the GNU C Library
License:        GFDL-1.1
Group:          Documentation/Other
Requires(post): %{install_info_prereq}
Requires(postun): %{install_info_prereq}
BuildArch:      noarch

%description info
This package contains the documentation for the GNU C library stored as
info files. Due to a lack of resources, this documentation is not
complete and is partially out of date.

%package html
Summary:        HTML Documentation for the GNU C Library
License:        GFDL-1.1
Group:          Documentation/HTML
BuildArch:      noarch

%description html
This package contains the HTML documentation for the GNU C library. Due
to a lack of resources, this documentation is not complete and is
partially out of date.

%package i18ndata
Summary:        Database Sources for 'locale'
License:        GPL-2.0+ and MIT
Group:          System/Libraries
BuildArch:      noarch

%description i18ndata
This package contains the data needed to build the locale data files to
use the internationalization features of the GNU libc. It is normally
not necessary to install this packages, the data files are already
created.

%package locale
Summary:        Locale Data for Localized Programs
License:        GPL-2.0+ and MIT and LGPL-2.1+
Group:          System/Libraries
Requires(post): /bin/cat
Requires:       glibc = %{version}
# bug437293
%ifarch ppc64
Obsoletes:      glibc-locale-64bit
%endif
%ifarch ppc
Obsoletes:      glibc-locale-32bit
%endif

%description locale
Locale data for the internationalisation features of the GNU C library.

%package -n nscd
Summary:        Name Service Caching Daemon
License:        GPL-2.0+
Group:          System/Daemons
Provides:       aaa_base:/etc/init.d/nscd
Provides:       glibc:/usr/sbin/nscd
Requires:       glibc = %{version}
Requires(preun): %insserv_prereq
Requires(post): %insserv_prereq
Requires(postun): %insserv_prereq

%description -n nscd
Nscd caches name service lookups and can dramatically improve
performance with NIS, NIS+, and LDAP.

%package profile
Summary:        Libc Profiling and Debugging Versions
License:        LGPL-2.1+ and SUSE-LGPL-2.1+-with-GCC-exception and GPL-2.0+
Group:          Development/Libraries/C and C++
Requires:       glibc = %{version}
# bug437293
%ifarch ppc64
Obsoletes:      glibc-profile-64bit
%endif
%ifarch ppc
Obsoletes:      glibc-profile-32bit
%endif

%description profile
This package contains special versions of the GNU C library which are
necessary for profiling and debugging.

%package devel
Summary:        Include Files and Libraries Mandatory for Development
License:        BSD-3-Clause and LGPL-2.1+ and SUSE-LGPL-2.1+-with-GCC-exception and GPL-2.0+
Group:          Development/Libraries/C and C++
Obsoletes:      epoll = 1.0
Provides:       epoll < 1.0
# bug437293
%ifarch ppc64
Obsoletes:      glibc-devel-64bit
%endif
%ifarch ppc
Obsoletes:      glibc-devel-32bit
%endif
Requires:       glibc = %{version}
Requires:       linux-kernel-headers

%description devel
These libraries are needed to develop programs which use the standard C
library.

%package devel-static
Summary:        C library static libraries for -static linking
License:        BSD-3-Clause and LGPL-2.1+ and SUSE-LGPL-2.1+-with-GCC-exception and GPL-2.0+
Group:          Development/Libraries/C and C++
Requires:       %{name}-devel = %{version}
# Provide Fedora name for package to make packaging easier
Provides:       %{name}-static = %version

%description devel-static
The glibc-devel-static package contains the C library static libraries
for -static linking.  You don't need these, unless you link statically,
which is highly discouraged.

%package utils
Summary:        Development utilities from GNU C library
License:        LGPL-2.1+
Group:          Development/Languages/C and C++
Requires:       glibc = %{version}

%description utils
The glibc-utils package contains mtrace, a memory leak tracer and
xtrace, a function call tracer which can be helpful during program
debugging.

If you are unsure if you need this, don't install this package.

# makedb requires libselinux. We add this program in a separate
# package so that glibc does not require libselinux.
%package extra
Summary:        Extra binaries from GNU C Library
License:        LGPL-2.1+
Group:          Development/Languages/C and C++
Requires:       glibc = %{version}

%description extra
The glibc-extra package contains some extra binaries for glibc that
are not essential but recommend to use.

makedb: A program to create a database for nss

%ifarch %ix86

%package obsolete
Summary:        Obsolete Shared Libraries from the GNU C Library
License:        LGPL-2.0+
Group:          System/Libraries
Requires:       glibc = %{version}

%description obsolete
This package provides some old libraries from the GNU C Library which
are no longer supported. Additional it provides a compatibility library
for old binaries linked against glibc 2.0.

Install this package if you need one of this libraries to get old
binaries working, but since this libraries are not supported and there
is no gurantee that they work for you, you should try to get newer
versions of your software.

%endif

%prep
%setup -n glibc-%{version} -q -a 2 -a 3 -a 4
# Owl crypt_blowfish
tar -xzf %SOURCE50
pushd crypt_blowfish-%{crypt_bf_version}
%patch80 -p1
%patch81 -p1
%patch82
popd
mv crypt/{crypt.h,gnu-crypt.h}
mv crypt_blowfish-%crypt_bf_version/*.[chS] crypt/
#
%patch0
# libNoVersion part is only active on ix86
%patch1
%patch3
%patch4
%patch5 -p1
%patch6 -p1
%patch7
%patch8
%patch12
%patch14
%patch16
%patch20
%patch21 -p1
# avoid changing nscd_stat.c mtime to avoid code generation
# differences on each rebuild
touch -r nscd/nscd_stat.c nscd/s-stamp
%patch22
%patch23
touch -r nscd/s-stamp nscd/nscd_stat.c
rm nscd/s-stamp
%patch25
%patch28
%patch29
%patch30
%patch33
%patch36
%patch38
%patch41 -p1
%patch45
%patch46 -p1
%patch47 -p1
%patch49
%patch52
%patch58
%patch65 -p1
%patch66 -p1
%patch67 -p1
%patch68 -p1
%patch71 -p1
%patch73 -p1
%patch74 -p1
%patch75 -p1
%patch84
%patch87 -p0
%patch88 -p1 -R
%patch89 -p1
%patch90 -p1
%patch91 -p1
%patch92 -p1 -R
%patch93 -p1
%patch94 -p1

#
# Inconsistency detected by ld.so: dl-close.c: 719: _dl_close: Assertion `map->l_init_called' failed!
#
# Glibc 2.8 introduced the HP_TIMING element to the rtld_global_ro struct # definition.
# If the base is built without power4 the loader won't have this element in
# the struct whereas the power4/5/6/... libc will, so there will be a disconnect
# between the size of the rtld_global_ro struct between the two and dl_close
# ends up getting called incorrectly when it's actually attempting to call a
# resolver function.  This is because the GLRO() macro simply attempts to
# compute an offset and gets the wrong one.
# Building the base glibc with --with-cpu=power4 solves this problem.
# But: ppc32 can not default to -mcpu=power4 because it would emit instructions
# which are not available on G3, G4 etc.
#
# We simply remove the power4 files, and build the base glibc for a generic powerpc cpu
# Additional cputuned libs can now be used on powerpc32
#
rm -fv sysdeps/powerpc/powerpc32/power4/hp-timing.c sysdeps/powerpc/powerpc32/power4/hp-timing.h
find . -name configure | xargs touch

#######################################################################
###
### BUILD
###
#######################################################################

%build
if [ -x /bin/uname.bin ]; then
	/bin/uname.bin -a
else
	uname -a
fi
uptime || :
ulimit -a
nice
# We do not want configure to figure out the system its building one
# to support a common ground and thus set build and host to the
# target_cpu.
%ifarch %arm
%define target %{_target_cpu}-suse-linux-gnueabi
%else
%define target %{_target_cpu}-suse-linux
%endif
# Adjust glibc version.h
echo "#define CONFHOST \"%{target}\"" >> version.h
echo "#define CVSDATE \"`date -r ChangeLog +%Y%m%d`\"" >> version.h
#
# Default CFLAGS and Compiler
#
BuildFlags="%{optflags} -U_FORTIFY_SOURCE"
BuildFlags="$(echo $BuildFlags | sed -e 's#-fstack-protector##' -e 's#-ffortify=[0-9]*##')"
BuildCC="%__cc"
BuildCCplus="%__cxx"
add_ons=",libidn"
PARALLEL="%{?_smp_mflags}"
#
#now overwrite for some architectures
#
%ifarch sparc64
	BuildFlags="-O2 -mcpu=ultrasparc -mvis -fcall-used-g6"
	BuildCC="gcc -m64"
	BuildCCplus="$BuildCCplus -m64"
%endif
%ifarch sparc
	BuildFlags="$BuildFlags -fcall-used-g6"
	BuildCC="gcc -m32"
	BuildCCplus="$BuildCCplus -m32"
%endif
%ifarch sparcv9
	BuildFlags="$BuildFlags -mcpu=ultrasparc -fcall-used-g6"
	BuildCC="gcc -m32"
	BuildCCplus="$BuildCCplus -m32"
%endif
%ifarch alphaev6
	BuildFlags="-mcpu=ev6"
%endif
%ifarch ppc ppc64
	BuildFlags="$(echo $BuildFlags | sed 's#-mminimal-toc##')"
%endif
%ifarch ppc64
	BuildCC="$BuildCC -m64"
	BuildCCplus="$BuildCCplus -m64"
%endif
%ifarch hppa
	BuildFlags="$BuildFlags -mpa-risc-1-1 -fstrict-aliasing"
%endif
%ifarch i386 i486 i586
# Add this to avoid performance penalty on Xen for 32-bit x86
# Note on i686 we build a special library
	BuildFlags="$BuildFlags -mno-tls-direct-seg-refs"
%endif
# Add flags for all plattforms except AXP
%ifnarch alpha
	BuildFlags="$BuildFlags -g"
%endif
%if %{disable_assert}
	BuildFlags="$BuildFlags -DNDEBUG=1"
%endif
%ifarch %ix86
	add_ons=$add_ons,noversion
%endif
%ifarch %arm mipsel
	add_ons=$add_ons,%glibc_ports_dir
	# fails to build otherwise - need to recheck and fix
	%define enable_stackguard_randomization 0
%endif

configure_and_build_glibc() {
	local dirname="$1"; shift
	local cflags="$1"; shift
	local addons="$1"; shift
	mkdir "cc-$dirname"
	cd "cc-$dirname"
%ifarch %arm
	# remove asynchronous-unwind-tables during configure as it causes
	# some checks to fail spuriously on arm
	conf_cflags="${cflags/-fasynchronous-unwind-tables/}"
	conf_cflags="${conf_cflags/-funwind-tables/}"
%else
	conf_cflags="$cflags"
%endif
	CFLAGS="$conf_cflags" CC="$BuildCC" CXX="$BuildCCplus"  ../configure \
		--prefix=%{_prefix} \
		--libexecdir=%{_libdir} --infodir=%{_infodir} \
		--enable-add-ons=nptl$addons --enable-profile \
		"$@" \
%if %{enable_stackguard_randomization}
		--enable-stackguard-randomization \
%endif
		--build=%{target} --host=%{target} \
%ifarch ppc ppc64 %{ix86} x86_64
		--enable-multi-arch \
%endif
%ifarch mipsel
		--without-fp \
%endif
		--enable-kernel=%{enablekernel} \
		--enable-bind-now
# Should we enable --enable-nss-crypt to build use freebl3 hash functions?
	# explicitly set CFLAGS to use the full CFLAGS (not the reduced one for configure)
	make $PARALLEL CFLAGS="$cflags"
	cd ..
}

%if !%{optimize_power}
	#
	# Build base glibc
	#
	configure_and_build_glibc base "$BuildFlags" "$add_ons"
%ifarch i686
	configure_and_build_glibc nosegneg "$BuildFlags -mno-tls-direct-seg-refs" "$add_ons"
%endif
%else
	#
	# Build POWER-optimized glibc
	#
	# First, base build:
	pBuildFlags="$BuildFlags -mcpu=%{powerpc_optimize_base} -mtune=%{powerpc_optimize_tune}"
	%if %{powerpc_optimize_base} != "power3"
	configure_and_build_glibc base "$pBuildFlags" "$add_ons" --with-cpu=%{powerpc_optimize_base}
	%else
	# Use no default CPU
	configure_and_build_glibc base "$pBuildFlags" "$add_ons"
	%endif
	# Then other power variants:
	for pcpu in \
	%if %{powerpc_optimize_cpu_power4}
		power4 \
	%endif
	%if %{powerpc_optimize_cpu_power6}
		power6 \
	%endif
	%if %{powerpc_optimize_cpu_power7}
		power7 \
	%endif
	; do
		configure_and_build_glibc $pcpu "$BuildFlags -mcpu=$pcpu" "$add_ons" \
			--with-cpu=$pcpu --disable-runbinaries
	done
	# Eventually, special Cell variant:
	%if %{powerpc_optimize_cpu_cell}
		configure_and_build_glibc ppc-cell-be "$BuildFlags -mcpu=cell" "$add_ons" --disable-runbinaries
	%endif
%endif # optimize_power

#
# Build html documentation
#
make -C cc-base html

#
# Build glibc_post_upgrade binary
#
$BuildCC -static %{optflags} -Os $RPM_SOURCE_DIR/glibc_post_upgrade.c -o glibc_post_upgrade \
     -Lcc-base -Bcc-base/csu \
    '-DREMOVE_TLS_DIRS' '-DREMOVE_PPC_OPTIMIZE_POWER5' \
%ifarch ppc ppc64
 %if !%{powerpc_optimize_cpu_power4}
    '-DREMOVE_PPC_OPTIMIZE_POWER4' \
 %endif
 %if !%{powerpc_optimize_cpu_power6}
    '-DREMOVE_PPC_OPTIMIZE_POWER6' \
 %endif
 %if !%{powerpc_optimize_cpu_power7}
    '-DREMOVE_PPC_OPTIMIZE_POWER7' \
 %endif
 %if !%{powerpc_optimize_cpu_cell}
    '-DREMOVE_PPC_OPTIMIZE_CELL' \
 %endif
%endif
    '-DLIBDIR="/%{_lib}"' '-DGCONV_MODULES_DIR="%{_libdir}/gconv"'

# crypt_blowfish man pages
pushd crypt_blowfish-%{crypt_bf_version}
make man
popd

#######################################################################
###
### CHECK
###
#######################################################################

%check
%if %{run_testsuite}
	# Increase timeout
	export TIMEOUTFACTOR=16
	%ifarch alpha %ix86 ppc ppc64 ia64 s390 s390x x86_64
		# ix86: tst-cputimer? fails
		# ia64: tst-timer4 fails
		# ppc64: tst-pselect, ftwtest fails
		# s390,s390x: tst-timer* fails
		make -C cc-base -k check || echo make check failed
	%else
		make -C cc-base check
	%endif
%endif
make -C cc-base check-abi || echo check-abi failed

#######################################################################
###
### INSTALL
###
#######################################################################

%install
# We don't want to strip the .symtab from our libraries in find-debuginfo.sh,
# certainly not from libpthread.so.* because it is used by libthread_db to find
# some non-exported symbols in order to detect if threading support
# should be enabled.  These symbols are _not_ exported, and we can't easily
# export them retroactively without changing the ABI.  So we have to
# continue to "export" them via .symtab, instead of .dynsym :-(
# But we also want to keep .symtab and .strtab of other libraries since some
# debugging tools currently require these sections directly inside the main
# files - specifically valgrind and PurifyPlus.
export STRIP_KEEP_SYMTAB=*.so*

# Make sure we will create the gconv-modules.cache
mkdir -p %{buildroot}%{_libdir}/gconv
touch %{buildroot}%{_libdir}/gconv/gconv-modules.cache

# Install base glibc
# Do not install in parallel, timezone Makefile will fail
make install_root=%{buildroot} install -C cc-base

install_optimized_variant() {
	local dirname="$1"; shift
	local subdir="$1"; shift
	local subdir_up="$1"; shift

cd "cc-$dirname"
destdir=$RPM_BUILD_ROOT/%{_lib}/$subdir
mkdir -p $destdir
# Don't run a complete make install, we know which libraries
# we want
for lib in libc math/libm nptl/libpthread rt/librt nptl_db/libthread_db
do
  libbase=${lib#*/}
  libbaseso=$(basename $RPM_BUILD_ROOT/%{_lib}/${libbase}-*.so)
  # Only install if different from base lib
  if cmp -s ${lib}.so ../cc-base/${lib}.so; then
    ln -sf $subdir_up/$libbaseso $destdir/$libbaseso
  else
    cp -a ${lib}.so $destdir/$libbaseso
  fi
  # Emulate ldconfig
  ln -sf $libbaseso $destdir/$(basename $RPM_BUILD_ROOT/%{_lib}/${libbase}.so.*)
done
cd ..
}
# Install i686 glibc for Xen
%ifarch i686
install_optimized_variant nosegneg i686/nosegneg "../.."
%endif

# Install power-optimized glibc
%if %{optimize_power}
	%if %{powerpc_optimize_cpu_power4}
	install_optimized_variant power4 power4 ".."
	%endif
	%if %{powerpc_optimize_cpu_power6}
	install_optimized_variant power6 power6 ".."
	%endif
	%if %{powerpc_optimize_cpu_power7}
	install_optimized_variant power7 power7 ".."
	%endif
	%if %{powerpc_optimize_cpu_cell}
	install_optimized_variant ppc-cell-be  ppc-cell-be ".."
	%endif
	%if %{powerpc_optimize_cpu_power6}
	# power6 is compatible with power6x
	# doing a directory symlink doesnt work, ldconfig follows them and accepts only the first real dir
	if test -d %{buildroot}/%{_lib}/power6; then
	    mkdir -p %{buildroot}/%{_lib}/power6x
	    for i in %{buildroot}/%{_lib}/power6/*.so; do
		b=`basename $i`
		ln -vs	../power6/$b %{buildroot}/%{_lib}/power6x/$b
		libbase=${b%.so}
		libbaseso=$(basename $RPM_BUILD_ROOT/%{_lib}/${libbase}-*.so)
		# Emulate ldconfig
		ln -sf $libbaseso %{buildroot}/%{_lib}/power6x/$(basename $RPM_BUILD_ROOT/%{_lib}/${libbase}.so.*)
	    done
	fi
	%endif
%endif # optimize_power

# Install locales
%if %{build_locales}
	# Do not install locales in parallel!
	cd cc-base
	make install_root=%{buildroot} install-locales -C ../localedata objdir=`pwd`
	cd ..
%endif
# Create file list for glibc-locale package
%{find_lang} libc

# Prepare obsolete/, used only on some architectures:
export RPM_BUILD_ROOT
%ifarch %ix86
mkdir -p %{buildroot}/%{_lib}/obsolete
%endif

# NPTL <bits/stdio-lock.h> is not usable outside of glibc, so include
# the generic one (RH#162634)
cp -av bits/stdio-lock.h %{buildroot}%{_includedir}/bits/stdio-lock.h

%ifarch s390x
	# s390x is different ...
	mkdir %{buildroot}/lib
	ln -sf ../%{_lib}/ld-%{version}.so %{buildroot}/lib/ld64.so.1
%endif

# Miscelanna:

install -m 0700 glibc_post_upgrade %{buildroot}%{_sbindir}

install -m 644 $RPM_SOURCE_DIR/bindresvport.blacklist %{buildroot}/etc
install -m 644 $RPM_SOURCE_DIR/nsswitch.conf %{buildroot}/etc
install -m 644 posix/gai.conf %{buildroot}/etc

mkdir -p %{buildroot}/etc/default
install -m 644 nis/nss %{buildroot}/etc/default/

mkdir -p %{buildroot}%{_includedir}/resolv
install -m 0644 resolv/mapv4v6addr.h %{buildroot}%{_includedir}/resolv/
install -m 0644 resolv/mapv4v6hostent.h %{buildroot}%{_includedir}/resolv/

mkdir -p %{buildroot}%{_datadir}/doc/glibc
cp -p manual/libc/*.html %{buildroot}%{_datadir}/doc/glibc

cd manpages; make install_root=%{buildroot} install; cd ..

# crypt_blowfish man pages
pushd crypt_blowfish-%{crypt_bf_version}
install -m755 -d %{buildroot}%{_mandir}/man3
install -m644 *.3 %{buildroot}%{_mandir}/man3
popd

# nscd tools:

cp nscd/nscd.conf %{buildroot}/etc
mkdir -p %{buildroot}/etc/init.d
install -m 755 $RPM_SOURCE_DIR/nscd.init %{buildroot}/etc/init.d/nscd
ln -sf /etc/init.d/nscd %{buildroot}/usr/sbin/rcnscd
mkdir -p %{buildroot}/var/run/nscd
touch %{buildroot}/var/run/nscd/{passwd,group,hosts}
touch %{buildroot}/var/run/nscd/{socket,nscd.pid}

#
# Create ld.so.conf
#
cat > %{buildroot}/etc/ld.so.conf <<EOF
%ifarch s390x sparc64 x86_64 ppc64 ppc
/usr/local/lib64
%endif
/usr/local/lib
include /etc/ld.so.conf.d/*.conf
# /lib64, /lib, /usr/lib64 and /usr/lib gets added
# automatically by ldconfig after parsing this file.
# So, they do not need to be listed.
EOF
# Add ldconfig cache directory for directory ownership
mkdir -p %{buildroot}/var/cache/ldconfig
# Empty the ld.so.cache:
rm -f %{buildroot}/etc/ld.so.cache
touch %{buildroot}/etc/ld.so.cache

# libNoVersion belongs only to glibc-obsolete:
%ifarch %ix86
	rm -f %{buildroot}%{_libdir}/libNoVersion*
	mkdir -p %{buildroot}/%{_lib}/obsolete/noversion
	mv -v %{buildroot}/%{_lib}/libNoVersion* %{buildroot}/%{_lib}/obsolete/noversion/
%endif

# Don't look at ldd! We don't wish a /bin/sh requires
chmod 644 %{buildroot}%{_bindir}/ldd

# Remove timezone data, now coming in standalone package:
for i in sbin/sln usr/bin/tzselect usr/sbin/zic usr/sbin/zdump etc/localtime; do
	rm -f %{buildroot}/$i
done
rm -rf %{buildroot}%{_datadir}/zoneinfo

# Remove the buildflags tracking section and the build-id
for o in %{buildroot}/%{_libdir}/crt[1in].o %{buildroot}/%{_libdir}/lib*_nonshared.a; do
	objcopy -R ".comment.SUSE.OPTs" -R ".note.gnu.build-id" $o
done

mkdir -p %{buildroot}/usr/lib/tmpfiles.d/
install -m 644 %{SOURCE20} %{buildroot}/usr/lib/tmpfiles.d/
mkdir -p %{buildroot}/lib/systemd/system
install -m 644 %{SOURCE21} %{buildroot}/lib/systemd/system
install -m 644 %{SOURCE22} %{buildroot}/lib/systemd/system

#######################################################################
###
### ...
###
#######################################################################

# Note: glibc_post_upgrade does:
# %%set_permissions %%{_libdir}/pt_chown
# since we cannot do it in our own post section

%post -p %{_sbindir}/glibc_post_upgrade

# Enabling the following lines will generate a 
# requires on /bin/sh but glibc should not require any other binary
# packages. Therefore we do the change with the build-in lua:
# %verifyscript
# %verify_permissions -e %{_libdir}/pt_chown

%verifyscript -p <lua>
os.execute("/usr/bin/chkstat -n --warn --system -e %{_libdir}/pt_chown")

%postun -p /sbin/ldconfig

%post locale
for l in /usr/share/locale/locale.alias %{_libdir}/gconv/gconv-modules; do
	[ -d "$l.d" ] || continue
	echo "###X# The following is autogenerated from extra files in the .d directory:" >>"$l"
	cat "$l.d"/* >>"$l"
done
/usr/sbin/iconvconfig

%post info
%install_info --info-dir=%{_infodir} %{_infodir}/libc.info.gz

%postun info
%install_info_delete --info-dir=%{_infodir} %{_infodir}/libc.info.gz

%preun -n nscd
%stop_on_removal nscd

%post -n nscd
%{insserv_force_if_yast nscd}
mkdir -p /var/run/nscd

%postun -n nscd
%restart_on_update nscd
%insserv_cleanup
exit 0

#######################################################################
###
### FILES
###
#######################################################################

# glibc

%files
%defattr(-,root,root)
%doc LICENSES
%config(noreplace) /etc/bindresvport.blacklist
%config /etc/ld.so.conf
%attr(0644,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /etc/ld.so.cache
%config(noreplace) /etc/rpc
%verify(not md5 size mtime) %config(noreplace) /etc/nsswitch.conf
%verify(not md5 size mtime) %config(noreplace) /etc/gai.conf
%config(noreplace) /etc/default/nss
%doc %{_mandir}/man1/getconf.1.gz
%doc %{_mandir}/man1/getent.1.gz
%doc %{_mandir}/man1/localedef.1.gz
%doc %{_mandir}/man5/*
/%{_lib}/ld-%{version}.so
%ifarch ppc s390 mips hppa
	/%{_lib}/ld.so.1
%else
	%ifarch ia64
		/%{_lib}/ld-linux-ia64.so.2
	%else
		%ifarch s390x ppc64
			/%{_lib}/ld64.so.1
			%ifarch s390x
				/lib/ld64.so.1
			%endif
		%else
			%ifarch x86_64
				/%{_lib}/ld-linux-x86-64.so.2
			%else
				%ifarch %arm
					/%{_lib}/ld-linux.so.3
				%else
					/%{_lib}/ld-linux.so.2
				%endif
			%endif
		%endif
	%endif
%endif
/%{_lib}/libBrokenLocale-%{version}.so
/%{_lib}/libBrokenLocale.so.1
/%{_lib}/libSegFault.so
/%{_lib}/libanl-%{version}.so
/%{_lib}/libanl.so.1
/%{_lib}/libc-%{version}.so
/%{_lib}/libc.so.6*
/%{_lib}/libcidn-%{version}.so
/%{_lib}/libcidn.so.1
/%{_lib}/libcrypt-%{version}.so
/%{_lib}/libcrypt.so.1
/%{_lib}/libdl-%{version}.so
/%{_lib}/libdl.so.2*
/%{_lib}/libm-%{version}.so
/%{_lib}/libm.so.6*
/%{_lib}/libnsl-%{version}.so
/%{_lib}/libnsl.so.1
/%{_lib}/libnss_compat-%{version}.so
/%{_lib}/libnss_compat.so.2
/%{_lib}/libnss_db-%{version}.so
/%{_lib}/libnss_db.so.2
/%{_lib}/libnss_dns-%{version}.so
/%{_lib}/libnss_dns.so.2
/%{_lib}/libnss_files-%{version}.so
/%{_lib}/libnss_files.so.2
/%{_lib}/libnss_hesiod-%{version}.so
/%{_lib}/libnss_hesiod.so.2
/%{_lib}/libnss_nis-%{version}.so
/%{_lib}/libnss_nis.so.2
/%{_lib}/libnss_nisplus-%{version}.so
/%{_lib}/libnss_nisplus.so.2
/%{_lib}/libpthread-%{version}.so
/%{_lib}/libpthread.so.0
/%{_lib}/libresolv-%{version}.so
/%{_lib}/libresolv.so.2
/%{_lib}/librt-%{version}.so
/%{_lib}/librt.so.1
/%{_lib}/libthread_db-1.0.so
/%{_lib}/libthread_db.so.1
/%{_lib}/libutil-%{version}.so
/%{_lib}/libutil.so.1
%define optimized_libs() \
	%dir %attr(0755,root,root) /%{_lib}/%1\
	/%{_lib}/%1/libc-%{version}.so\
	/%{_lib}/%1/libc.so.6*\
	/%{_lib}/%1/libm-%{version}.so\
	/%{_lib}/%1/libm.so.6*\
	/%{_lib}/%1/libpthread-%{version}.so\
	/%{_lib}/%1/libpthread.so.0\
	/%{_lib}/%1/librt-%{version}.so\
	/%{_lib}/%1/librt.so.1\
	/%{_lib}/%1/libthread_db-1.0.so\
	/%{_lib}/%1/libthread_db.so.1

%ifarch i686
%dir %attr(0755,root,root) /%{_lib}/i686
%{optimized_libs i686/nosegneg}
%endif
%if %{optimize_power}
	%if %{powerpc_optimize_cpu_power4}
		%{optimized_libs power4}
	%endif
	%if %{powerpc_optimize_cpu_power6}
		%{optimized_libs power6}
		%{optimized_libs power6x}
	%endif
	%if %{powerpc_optimize_cpu_power7}
		%{optimized_libs power7}
	%endif
	%if %{powerpc_optimize_cpu_cell}
		%{optimized_libs ppc-cell-be}
	%endif
%endif # optimize_power
%dir %attr(0700,root,root) /var/cache/ldconfig
/sbin/ldconfig
%{_bindir}/gencat
%{_bindir}/getconf
%{_bindir}/getent
%{_bindir}/iconv
%attr(755,root,root) %{_bindir}/ldd
%ifarch %ix86 sparc sparcv9
	%{_bindir}/lddlibc4
%endif
%{_bindir}/locale
%{_bindir}/localedef
%verify(not mode caps) %attr(4755,root,root) %{_libdir}/pt_chown
%dir %attr(0755,root,root) %{_libdir}/getconf
%{_libdir}/getconf/*
%{_sbindir}/glibc_post_upgrade
%{_sbindir}/iconvconfig
%dir /var/db

%ifarch %ix86

%files obsolete
%defattr (755,root,root,755)
%dir /%{_lib}/obsolete/
	%dir /%{_lib}/obsolete/noversion
	/%{_lib}/obsolete/noversion/libNoVersion-%{version}.so
	/%{_lib}/obsolete/noversion/libNoVersion.so.1
%endif

%files locale -f libc.lang
%defattr(-,root,root)
%{_datadir}/locale/locale.alias
%if %{build_locales}
	/usr/lib/locale
%endif
%{_libdir}/gconv

%files devel
%defattr(-,root,root)
%doc COPYING COPYING.LIB FAQ NEWS NOTES README BUGS CONFORMANCE
%doc %{_mandir}/man1/catchsegv.1.gz
%doc %{_mandir}/man1/rpcgen.1.gz
%doc %{_mandir}/man1/sprof.1.gz
%doc %{_mandir}/man3/*
%{_bindir}/catchsegv
%{_bindir}/rpcgen
%{_bindir}/sprof
%{_includedir}/*
%{_libdir}/*.o
%{_libdir}/*.so
# These static libraries are needed even for shared builds
%{_libdir}/libbsd-compat.a
%{_libdir}/libc_nonshared.a
%{_libdir}/libg.a
%{_libdir}/libieee.a
%ifarch ppc ppc64 s390 s390x sparc sparcv8 sparcv9 sparcv9v
# This is not built on sparc64.
	%{_libdir}/libnldbl_nonshared.a
%endif
%{_libdir}/libmcheck.a
%{_libdir}/libpthread_nonshared.a
%{_libdir}/librpcsvc.a

%files devel-static
%defattr(-,root,root)
%{_libdir}/libBrokenLocale.a
%{_libdir}/libanl.a
%{_libdir}/libc.a
%{_libdir}/libcrypt.a
%{_libdir}/libdl.a
%{_libdir}/libm.a
%{_libdir}/libnsl.a
%{_libdir}/libpthread.a
%{_libdir}/libresolv.a
%{_libdir}/librt.a
%{_libdir}/libutil.a

%files info
%defattr(-,root,root)
%doc %{_infodir}/libc.info.gz
%doc %{_infodir}/libc.info-?.gz
%doc %{_infodir}/libc.info-??.gz

%files html
%defattr(-,root,root)
%doc %{_prefix}/share/doc/glibc

%files i18ndata
%defattr(-,root,root)
%{_prefix}/share/i18n

%files -n nscd
%defattr(-,root,root)
%config(noreplace) /etc/nscd.conf
%config /etc/init.d/nscd
%{_sbindir}/nscd
%{_sbindir}/rcnscd
/lib/systemd/system/nscd.service
/lib/systemd/system/nscd.socket
%dir /usr/lib/tmpfiles.d
/usr/lib/tmpfiles.d/nscd.conf
%dir %attr(0755,root,root) %ghost /var/run/nscd
%attr(0644,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/nscd.pid
%attr(0666,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/socket
%attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/passwd
%attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/group
%attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/hosts

%files profile
%defattr(-,root,root)
%{_libdir}/libc_p.a
%{_libdir}/libBrokenLocale_p.a
%{_libdir}/libanl_p.a
%{_libdir}/libm_p.a
%{_libdir}/libcrypt_p.a
%{_libdir}/libpthread_p.a
%{_libdir}/libresolv_p.a
%{_libdir}/libnsl_p.a
%{_libdir}/librt_p.a
%{_libdir}/librpcsvc_p.a
%{_libdir}/libutil_p.a
%{_libdir}/libdl_p.a

%files utils
%defattr(-,root,root)
/%{_lib}/libmemusage.so
/%{_lib}/libpcprofile.so
%dir /%{_libdir}/audit
/%{_libdir}/audit/sotruss-lib.so
# These need gd-devel for building
# %%{_bindir}/memusage
# %%{_bindir}/memusagestat
%{_bindir}/mtrace
%{_bindir}/pcprofiledump
%{_bindir}/sotruss
%{_bindir}/xtrace
%{_bindir}/pldd

%files extra
%defattr(-,root,root)
%{_bindir}/makedb
/var/db/Makefile

%changelog

Places

File glibc.spec of Package glibc (Revision a34e9abb9d87eb312358dbe2ecee5243)

Places