openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File kbd.init of Package kbd (Revision 32a3fa8de1174564e156876b4ddc2e60)

Currently displaying revision 32a3fa8de1174564e156876b4ddc2e60 , Show latest

#! /bin/bash
# Copyright (c) 1995-2005 SUSE LINUX Products AG, Nuernberg, Germany.
#
# Author:   Burchard Steinbild
#           Werner Fink <werner@suse.de>
#
# Please send feedback to http://www.suse.de/feedback
#
# /etc/init.d/kbd
#
#   and symbolic its link
#
# /sbin/rckbd
#
# Warning:
# /etc/init.d/earlykbd can run this script even if
# the Required-Start conditions listed here are not satisfied.
# Our use of $remote_fs is 
# /usr/share/kbd - for finding keymaps
# /usr/sbin/hwinfo - for numlock from bios
#
### BEGIN INIT INFO
# Provides:       kbd
# Required-Start: $remote_fs
# Required-Stop:  $remote_fs
# Should-Start:   fbset setserial
# Should-Stop:    $null
# Default-Start:  1 2 3 5 S
# Default-Stop:   0 6
# X-Interactive:  true
# Short-Description:    Keyboard settings
# Description:          Keyboard settings (don't disable!)
### END INIT INFO

. /etc/rc.status
. /etc/sysconfig/console
. /etc/sysconfig/keyboard

test -n "$KBD_VERBOSE" && set -x

# XXX: is this really needed just for LOCALE_CHARMAP?
test -e /etc/SuSEconfig/profile && . /etc/SuSEconfig/profile
test -e /etc/profile.d/lang.sh  && . /etc/profile.d/lang.sh
LOCALE_CHARMAP=`locale charmap 2>/dev/null`
LC_ALL=POSIX

KBDBASE="/usr/share/kbd"

#
# setup kbdrate and led status
#
function set_kbdrate ()
{
	local line

if test "$MACHINE" != "mac" ; then
	    KBDOPT=""
	    if test -n "$KBD_RATE" ; then
		KBDOPT="${KBDOPT:+$KBDOPT }-r $KBD_RATE"
	    fi
	    if test -n "$KBD_DELAY"; then
		KBDOPT="${KBDOPT:+$KBDOPT }-d $KBD_DELAY"
	    fi
	    if test -n "$KBDOPT" -a -x /bin/kbdrate ; then
		echo -n "Keyboard: "
		for tty in $KBD_TTY; do
		    /bin/kbdrate $KBDOPT < $tty 2> /dev/null
		    rc_status
		    case "$KBDOPT" in
		    *-s*) continue ;;
		    esac
		    KBDOPT="${KBDOPT:+$KBDOPT }-s"
		done
		rc_status -v1
	    fi
	fi

# setleds
	#
	# Note: The file /var/run/numlock-on is used in ~/.xinitrc
	#	to reflect the correct numlock state choosen by the
	#	user even under X11
	#
	if test "$KBD_NUMLOCK" = "yes"; then
	    touch /var/run/numlock-on
	elif test "$KBD_NUMLOCK" = "no"; then
	    rm -f /var/run/numlock-on
	elif test "$KBD_NUMLOCK" = "bios"; then
	    if test -x /usr/sbin/hwinfo ; then
		/usr/sbin/hwinfo --bios | \
		while read line ; do
		    case "$line" in
			Num\ Lock:\ on)  touch /var/run/numlock-on ;;
			Num\ Lock:\ off) rm -f /var/run/numlock-on ;;
			Caps\ Lock:)	 break
		    esac
		done
	    else
		echo "no /usr/sbin -> Numlock off."
		rm -f /var/run/numlock-on
	    fi
	fi 
	unset line

#
	# Only change keyboard leds if setleds is in path
	# 
	type -p setleds &> /dev/null		|| return

if test -e /var/run/numlock-on ; then
	    LEDOPT="+num"
	else
	    LEDOPT="-num"
	fi
	if test "$KBD_CAPSLOCK" = "yes"; then
	    LEDOPT="$LEDOPT +caps"
	else
	    LEDOPT="$LEDOPT -caps"
	fi  
	if test "$KBD_SCRLOCK" = "yes"; then
	    LEDOPT="$LEDOPT +scroll"
	else
	    LEDOPT="$LEDOPT -scroll"
	fi

#
	# Only change keyboard leds if they will be switched
	# on ... OR if they are switched on currently
	#
	if [[ $LEDOPT == *+* ]] ; then
	    touch /var/run/setleds-on
	else
	    test -e /var/run/setleds-on	|| return
	    test -n "$LEDOPT"		|| return
	    rm -f /var/run/setleds-on
	fi

for tty in $KBD_TTY; do
	    setleds -D $LEDOPT < $tty
	done
}

function console_font_height () 
{
	if test -x /sbin/fbtest && /sbin/fbtest -C $1 ; then
	    echo 16
	else
	    set -- $(IFS=x /bin/showconsolefont -i -C $1 2> /dev/null)
	    if test -n "$2" ; then
		echo $2
	    else
		echo 8
	    fi
	fi
}
#
rc_reset
case "$1" in
    start|restart|reload|force-reload)

case "$1" in
            start)
		# don't do anything if we have this file.
		# this means that initialization was already done.
		# don't do it twice unless forced, it may annoy xdm and
		# produce lots of error messages.
		test -s /var/run/keymap -a "$RUNLEVEL" != S && exit 0
	    ;;
	esac

MACHINE=`/bin/uname -m 2> /dev/null`
	if test "$MACHINE" = "sparc" -o "$MACHINE" = "sparc64" ; then 
	   # Test if we have a serial console. 
	   (test -c /dev/tty1 && > /dev/tty1 ) > /dev/null 2>&1 || exit 0
	fi
	# iSeries machines also exit, just a little further down...

# The variable NON_SUSE_KERNEL determines whether we need to chvt 
	# to a console before some console settings apply.
	# We have no magic to find out about this (at boot time), so we 
	# leave it to the user to read this comment and put NON_SUSE_KERNEL="yes"
	# into /etc/sysconfig/console

test "$NON_SUSE_KERNEL" = "yes" && FGCONS=`/bin/fgconsole`

#
	# first search the wanted keytable.
	#
	if test $MACHINE = ppc -o $MACHINE = ppc64 ; then
		test -f /proc/cpuinfo || mount -n -t proc proc /proc 2>/dev/null
		while read line; do
		       case "$line" in
			   *MacRISC*)	MACHINE="mac"
				test -f /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes && \
					echo 1 > /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
				;;
			   *CHRP*)  	MACHINE="chrp";;
			   *PReP*)  	MACHINE="prep" ;;
			   *PS3*)	MACHINE="ps3" ;;
			   *iSeries*)   exit 0 ;;
			esac
		done < /proc/cpuinfo
	fi

KBD_TTY_DEFAULT="${KBD_TTY:-tty1 tty2 tty3 tty4 tty5 tty6}"

newkbd=""
	for tty in $KBD_TTY_DEFAULT; do
	    # >=tty7 left out intentionaly (Bug #302010)
	    test ${tty#tty} -ge 7 2>/dev/null && continue
	    test -w /dev/$tty		|| continue
	    test -c /dev/$tty		|| continue
	    > /dev/$tty &> /dev/null	|| continue
	    newkbd="${newkbd:+$newkbd }/dev/$tty"
	done
	KBD_TTY="$newkbd"
	unset newkbd

KEYMAP=()
	if test -r /etc/defkeymap.name; then
	    read cached < /etc/defkeymap.name
	    a="${cached##*/}" 
	    a="${a%.gz}" 
	    a="${a%.map}" 
	    b="${KEYTABLE%.gz}"
	    b="${b%.map}"
	    if [ -n "$a" -a "$a" = "$b" ]; then
		KEYMAP=("$cached")
	    fi
	    unset a b
	fi
	if test -z "$KEYMAP"; then
	    if test -e /$KEYTABLE ; then
		KEYMAP=($KEYTABLE)
	    else
		case "$KEYTABLE" in
		    *.gz)  KBDPATH="*/${KEYTABLE}" ;;
		    *.map) KBDPATH="*/${KEYTABLE} */${KEYTABLE}.gz" ;;
		    *)     KBDPATH="*/${KEYTABLE} */${KEYTABLE}.gz */${KEYTABLE}.map.gz */${KEYTABLE}.map" ;;
		esac
		KEYMAP=($(find ${KBDBASE}/keymaps -type f $ -path ${KBDPATH// / -o -path } $ | sort))
	    fi
	fi
	
	if test "$MACHINE" = "ps3" ; then
	    # do not mess up console
	    unset CONSOLE_FONT
	fi
	# setfont
	if test -d ${KBDBASE}/consolefonts -a \
		-n "$CONSOLE_FONT" -a "$CONSOLE_FONT" != "YAST_ASK"
	then
	    if test ! -z "$CONSOLE_UNICODEMAP"; then 
		UMAP="-u $CONSOLE_UNICODEMAP"
	    fi
	    if test ! -z "$CONSOLE_SCREENMAP"; then 
		SMAP="-m $CONSOLE_SCREENMAP"
	    fi
	    PRINTABLE_MAGIC="";
	    if test -n "$CONSOLE_MAGIC" -a "$CONSOLE_MAGIC" != "none"; then
		case $CONSOLE_MAGIC in
		    $B) PRINTABLE_MAGIC="G0:iso8859-1" ;;
		    \(0) PRINTABLE_MAGIC="G0:vt100" ;;
		    \(U) PRINTABLE_MAGIC="G0:ROM" ;;
		    \(K) PRINTABLE_MAGIC="G0:loadable" ;;
		    $B) PRINTABLE_MAGIC="G1:iso8859-1" ;;
		    \)0) PRINTABLE_MAGIC="G1:vt100" ;;
		    \)U) PRINTABLE_MAGIC="G1:ROM" ;;
		    \)K) PRINTABLE_MAGIC="G1:loadable" ;;
		    *)	 PRINTABLE_MAGIC="magic='$CONSOLE_MAGIC'" ;;
		esac
		CONSOLE_MAGIC="\033$CONSOLE_MAGIC"
	    else
		CONSOLE_MAGIC="";
	    fi
	    if test -x /bin/setfont -a -n "$CONSOLE_FONT" ; then
		echo "Loading console font $CONSOLE_FONT $UMAP $SMAP $PRINTABLE_MAGIC"
		for tty in $KBD_TTY; do
		    # The chvt is not needed for SuSE kernels
		    test "$NON_SUSE_KERNEL" != "yes" || chvt ${tty#*tty}

# Setfont tries to open a device
		    test "${tty##*/}" = "${tty}" && tty=/dev/$tty

if test "$CONSOLE_FONT" = "default" ; then
			setfont -C $tty -$(console_font_height $tty) $UMAP $SMAP
		    else
			setfont -C $tty $CONSOLE_FONT $UMAP $SMAP
		    fi
		    rc_status

echo -en "$CONSOLE_MAGIC" > $tty
		done
		test "$NON_SUSE_KERNEL" != "yes" || chvt $FGCONS
		rc_status -v1
	    fi
	fi

if test -z "$KEYTABLE"; then
	    echo "No keyboard map to load"
	else
	    if test "${#KEYMAP[@]}" = 0 -o ! -d "$KBDBASE" ; then
		if test -r /etc/defkeymap.map ; then
		    if test "${#KEYMAP[@]}" -gt 0; then
		    	echo "$KEYMAP is unvailable, using /etc/defkeymap.map instead."
			if test -r /var/run/keymap ; then
			    read cached < /etc/defkeymap.name
			    if test "$KEYMAP" != "$cached"; then
			        echo "Warning: fallback differs: $cached"
			    fi
			fi
		    else
		    	echo "Can not find a keymap for ${KEYTABLE}, trying fallback."
		    fi
		    KEYMAP=(/etc/defkeymap.map)
		else
		    echo "Fallback /etc/defkeymap.map not there."
		    echo "Can not find a keymap for ${KEYTABLE}, Exit."
		    rc_failed
		fi
	    else
		if test "${#KEYMAP[@]}" -gt 1 ; then
		    echo "Found more than one keymap ${KEYTABLE}"
		    echo "Using $KEYMAP."
		    echo "If you want another one, please add complete path to"
		    echo "KEYTABLE in /etc/sysconfig/keyboard."
		fi
	    fi
	    rc_status && retmsg="`loadkeys -C "$KBD_TTY" $KEYMAP 2>&1`"
	    if test $? -eq 0 && ( > /var/run/keymap ) > /dev/null 2>&1 ; then
		echo "$KEYMAP"    > /var/run/keymap
	    else
		case "$RUNLEVEL" in
		S|N|1|\#) true ;;
		*)   rc_failed ;;
		esac
	    fi
	    echo "Loading keymap ${retmsg#Loading*${KBDBASE}/keymaps/}"
	    rc_status -v1

set_kbdrate
	fi
	
	# Disable CAPS LOCK key if wanted
	if test "$KBD_DISABLE_CAPS_LOCK" = "yes"; then
	    loadkeys -C "$KBD_TTY" disable.capslock >/dev/null 2>&1 || echo "Could not disable Caps Lock"
	fi

# Load compose tables
	case "$RUNLEVEL" in
	    S|N|1|\#) COMPOSETABLE="" ;;
	esac
	if test ! -z "$COMPOSETABLE"; then
	    unset COMPOSELOADED COMPOSECLEAR
	    for name in $COMPOSETABLE; do
		# Test for compose clear flag
		if test "$name" = "-c" -o "$name" = "clear"; then
		    COMPOSECLEAR=-c
		    continue
		fi
		# Handle the first table differently ...
		if test -z "$COMPOSELOADED"; then
		    echo -n "Loading compose table $name"
		    loadkeys -C "$KBD_TTY" $COMPOSECLEAR compose.$name >/dev/null 2>&1
		    rc_check
		    #if test $name = clear; then rc_reset; fi
		    COMPOSELOADED=1
		else
		    echo -n " $name"
		    loadkeys -C "$KBD_TTY" compose.$name >/dev/null 2>&1
		    rc_check
		fi
	    done
	    if test ! -z "$COMPOSELOADED"; then 
		rc_status -v
	    fi
	fi

# Unicode mode	
	if test -x /bin/kbd_mode ; then
	    case $LOCALE_CHARMAP in
		UTF-8)
 		    echo Start Unicode mode
	            for tty in $KBD_TTY; do
			# The chvt is not needed for SuSE kernels
			test "$NON_SUSE_KERNEL" != "yes" || chvt ${tty#*tty}

# Tell the console output driver that the bytes
			# arriving are UTF-8 encoded multibyte sequences.
			echo -n -e '\033%G' > $tty

# Set the keyboard driver in Unicode mode.
			# (Default is ASCII mode.)
			# This really does nothing with the way normal
			# keys are handled in the kernel. All it does is:
			# - It is necessary for `dumpkeys' in order to
			#   not drop U+XXXX entries from the keymaps.
			# - It is necessary for `loadkeys' in order to
			#   avoid warnings.
			# - Unicode characters typed as Alt-x1 ... Alt-xn
			#   (where x1,...,xn are digits on the numeric keypad)
			#    will be emitted in UTF-8.
			kbd_mode -u -C $tty
			rc_status
		    done
	            ;;
	        *)
		    echo Stop Unicode mode
		    for tty in $KBD_TTY; do
			# The chvt is not needed for SuSE kernels
			test "$NON_SUSE_KERNEL" != "yes" || chvt ${tty#*tty}

echo -n -e '\033%@' > $tty

kbd_mode -a -C $tty
			rc_status
    		    done
	            ;;
	    esac
	    test "$NON_SUSE_KERNEL" != "yes" || chvt $FGCONS
	    rc_status -v1
	fi
	
	case "$RUNLEVEL" in
	    S|N|1|\#) true ;;
	    *)
		map=`mktemp --tmpdir keymap.XXXXXX` && {
		trap "rm -f $map" EXIT SIGTERM
		if test -n "$KBD_TTY" ; then
		    dumpkeys -C ${KBD_TTY%% *}
		else
		    dumpkeys
		fi > $map

if type -p cmp > /dev/null 2>&1 && cmp -s /etc/defkeymap.map $map
		then
		    rm -f $map
		fi

if test -s $map; then
		    # FIXME: this should be done much earlier
		    # to avoid bugzilla# 259694 or similar.
		    mv $map /etc/defkeymap.map
		    if test "${#KEYMAP[@]}" -gt 0 -a "$KEYMAP" != "/etc/defkeymap.map" ; then
			echo $KEYMAP > /etc/defkeymap.name
		    fi
		fi
		trap - EXIT SIGTERM
		}
	esac

;;
    stop)
	# enable start after stop.
        echo -n "$0 stop"
	rm -f /var/run/keymap
	rc_status -v
	;;
    check|status)
	if test -r /var/run/keymap ; then
	    read current < /var/run/keymap
	    echo "Keymap $current is loaded."
	else
	    rc_failed 3
	fi
	;;
    *)
	echo "Usage: $0 {start|stop|restart|reload|force-reload|status|check}"
	exit 2
	;;
esac
rc_exit

Places

File kbd.init of Package kbd (Revision 32a3fa8de1174564e156876b4ddc2e60)

Places