File macros.systemd of Package systemd-rpm-macros

Overview Repositories Revisions Requests Users Attributes Meta

File macros.systemd of Package systemd-rpm-macros (Revision a8f73dc11b38a900350a8ab96b95d755)

Currently displaying revision a8f73dc11b38a900350a8ab96b95d755 , Show latest

#  -*- Mode: rpm-spec; indent-tabs-mode: t -*- */
# RPM macros for packages installing systemd unit files
#
###
#
# When a package install systemd unit files, it should use the
# following macros:
#
# add %systemd_requires in the specfile
#
# %pre
# %service_add_pre demo.service demo1.service
#
# %post
# %service_add_post demo.service demo1.service
#
# %preun
# %service_del_preun demo.service
#
# %postun
# %service_del_postun demo.service
# %service_del_postun_without_restart demo.service
#
# Note: the upstream variants are also available and are aliases to
# their SUSE counterparts. However for consistency the SUSE macros
# should be preferred unless the package is intended to be portable
# across multiple distributions based on RPM.

%_unitdir /usr/lib/systemd/system
%_userunitdir /usr/lib/systemd/user
%_presetdir /usr/lib/systemd/system-preset
%_userpresetdir /usr/lib/systemd/user-preset
%_udevhwdbdir /usr/lib/udev/hwdb.d
%_udevrulesdir /usr/lib/udev/rules.d
%_journalcatalogdir /usr/lib/systemd/catalog
%_tmpfilesdir /usr/lib/tmpfiles.d
%_sysusersdir /usr/lib/sysusers.d
%_sysctldir /usr/lib/sysctl.d
%_ntpunitsdir /usr/lib/systemd/ntp-units.d
%_binfmtdir /usr/lib/binfmt.d
%_environmentdir /usr/lib/environment.d
%_modulesloaddir /usr/lib/modules-load.d
%_modprobedir /usr/lib/modprobe.d
%_systemdgeneratordir /usr/lib/systemd/system-generators
%_systemdusergeneratordir /usr/lib/systemd/user-generators
%_systemd_system_env_generator_dir /usr/lib/systemd/system-environment-generators
%_systemd_user_env_generator_dir /usr/lib/systemd/user-environment-generators

%systemd_requires \
Requires(pre): systemd \
Requires(post): systemd \
Requires(preun): systemd \
Requires(postun): systemd \
%{nil}

%systemd_ordering \
OrderWithRequires(post): systemd \
OrderWithRequires(preun): systemd \
OrderWithRequires(postun): systemd \
%{nil}

%_restart_on_update_force() /usr/bin/systemctl try-restart %{*} || : %{nil}
%_restart_on_update_never() : # Restart of %{*} skipped %{nil}

%_restart_on_update() 									\
	if [ -e /etc/sysconfig/services ]; then						\
		DISABLE_RESTART_ON_UPDATE=						\
		. /etc/sysconfig/services						\
		case "$DISABLE_RESTART_ON_UPDATE" in					\
		yes|1)	;;								\
		*)	/usr/bin/systemctl try-restart %{*} || :			\
		esac									\
	fi										\
%{nil}

# Figure out when presets need to be applied. This information is only
# recorded during %pre and is actually applied during %post.
#
# Presets might need to be applied during package install but also
# during package update. On update, packages might introduce new
# services but we need to make sure that's not happening during the
# migration of SysV initscripts. On package install, presets might
# have been already applied because of package renaming or split.
#
%service_add_pre()									\
if [ -x /usr/bin/systemctl ]; then							\
	for service in %{?*} ; do							\
		if [ ! -e "/usr/lib/systemd/system/$service" ] &&			\
		   [ ! -e "/etc/init.d/${service%.*}" ]; then				\
			mkdir -p /run/systemd/rpm/needs-preset				\
			touch "/run/systemd/rpm/needs-preset/$service"			\
		fi									\
	done										\
fi											\
%{nil}

# Apply the presets if %pre told us to do so.
#
%service_add_post()									\
if [ -x /usr/bin/systemctl ]; then							\
	for service in %{?*} ; do							\
		if [ -e "/run/systemd/rpm/needs-preset/$service" ]; then		\
			/usr/bin/systemctl preset "$service" || :			\
			rm "/run/systemd/rpm/needs-preset/$service" || :		\
		else	      								\
			/usr/lib/systemd/systemd-sysv-convert --apply %{?*} || :	\
		fi									\
	done										\
fi											\
%{nil}

# On uninstall, disable and stop services
#
%service_del_preun()									\
if [ $1 -eq 0 -a -x /usr/bin/systemctl ]; then						\
	# Package removal, not upgrade							\
	/usr/bin/systemctl --no-reload disable --now %{?*} || :				\
fi											\
%{nil}

# On uninstall, tell systemd to reload its unit files.
# On update, tell systemd to reload its unit files but don't restart service.
#
# It ignores the content of /etc/sysconfig/services
#
%service_del_postun_without_restart()							\
if [ -x /usr/bin/systemctl ]; then							\
	/usr/bin/systemctl daemon-reload || :						\
fi											\
%{nil}

# On uninstall, tell systemd to reload its unit files.
# On update, tell systemd to reload its unit files and restart service.
#
# It ignores the content of /etc/sysconfig/services
#
%service_del_postun_with_restart()							\
if [ -x /usr/bin/systemctl ]; then							\
	/usr/bin/systemctl daemon-reload || :						\
	if [ $1 -ge 1 ]; then								\
	        # Package upgrade, not uninstall					\
		/usr/bin/systemctl try-restart %{?*} || :				\
	fi										\
fi											\
%{nil}

# On uninstall, tell systemd to reload its unit files
#
# Deprecated options, please do not use in new code:
#  -f : force restart on update (replaced by %service_del_postun_with_restart)
#  -n : don't restart on update (replaced by %service_del_postun_without_restart)
#
# The default is to read DISABLE_RESTART_ON_UPDATE from /etc/sysconfig/services
#
%service_del_postun(fn)									\
if [ -x /usr/bin/systemctl ]; then							\
	/usr/bin/systemctl daemon-reload || :						\
	if [ $1 -ge 1 ]; then								\
		# Package upgrade, not uninstall					\
		%{expand:%%_restart_on_update%{-f:_force}%{!-f:%{-n:_never}} %{?*}}	\
	fi										\
fi											\
%{nil}

#
# Upstream variants
#

%systemd_pre() %{expand::%%service_add_pre %{?**}}
%systemd_post() %{expand::%%service_add_post %{?**}}
%systemd_preun() %{expand::%%service_del_preun %{?**}}
%systemd_postun() %{expand::%%service_del_postun_without_restart %{?**}}
%systemd_postun_with_restart() %{expand::%%service_del_postun %{?**}}

%systemd_user_pre()									\
if [ -x /usr/bin/systemctl ]; then							\
	for service in %{?*} ; do							\
		if [ ! -e "/usr/lib/systemd/user/$service" ]; then			\
			mkdir -p /run/systemd/rpm/needs-user-preset			\
			touch "/run/systemd/rpm/needs-user-preset/$service"		\
		fi									\
	done										\
fi											\
%{nil}

%systemd_user_post()									\
if [ -x /usr/bin/systemctl ]; then							\
	for service in %{?*} ; do							\
		if [ -e "/run/systemd/rpm/needs-user-preset/$service" ]; then		\
			/usr/bin/systemctl --global preset "$service" || :		\
			rm "/run/systemd/rpm/needs-user-preset/$service" || :		\
		fi									\
	done										\
fi											\
%{nil}

%systemd_user_preun()									\
if [ $1 -eq 0 -a -x /usr/bin/systemctl ]; then						\
        # Package removal, not upgrade							\
        /usr/bin/systemctl --global disable %{?*} || :					\
fi											\
%{nil}

%systemd_user_postun() %{nil}
%systemd_user_postun_with_restart() %{nil}

%udev_hwdb_update() \
[ -x /usr/bin/udevadm ] && /usr/bin/udevadm hwdb --update || : \
%{nil}

%udev_rules_update() \
[ -x /usr/bin/udevadm ] && /usr/bin/udevadm control --reload || : \
%{nil}

%journal_catalog_update() \
[ -x /usr/bin/journalctl ] && /usr/bin/journalctl --update-catalog || : \
%{nil}

# Deprecated. Use %tmpfiles_create_package instead
%tmpfiles_create() \
[ -z "${TRANSACTIONAL_UPDATE}" -a -x /usr/bin/systemd-tmpfiles ] && \
	/usr/bin/systemd-tmpfiles --create %{?*} || : \
%{nil}

# This may be used by package installation scripts to create files according to
# their tmpfiles configuration from a package installation script, even before
# the files of that package are installed on disk.
#
# Example:
#   Source1: %{name}-tmpfiles.conf
#   ...
#   %install
#   install -D %SOURCE1 %{buildroot}%{_tmpfilesdir}/%{name}.conf
#   %pre
#   %tmpfiles_create_package %{name} %SOURCE1
#   %files
#   %{_tmpfilesdir}/%{name}.conf
#
%tmpfiles_create_package() \
if [ -z "${TRANSACTIONAL_UPDATE}" ]; then \
	/usr/bin/systemd-tmpfiles --replace=%_tmpfilesdir/%1.conf --create - <<SYSTEMD_INLINE_EOF || : \
%(cat %2) \
SYSTEMD_INLINE_EOF\
%fi \
%{nil}

# Deprecated. Use %sysusers_create_package instead
%sysusers_create() \
%{warn: %%sysusers_create is deprecated, use %%sysusers_create_package instead} \
[ -x /usr/bin/systemd-sysusers ] && /usr/bin/systemd-sysusers %{?*} || : \
%{nil}

# Deprecated. Use %sysusers_create_package instead
%sysusers_create_inline() \
%{warn: %%sysusers_create_inline is deprecated, use %%sysusers_create_package instead} \
[ -x /usr/bin/systemd-sysusers ] && /usr/bin/systemd-sysusers - <<SYSTEMD_INLINE_EOF || : \
%{?*} \
SYSTEMD_INLINE_EOF\
%{nil}

# This should be used by package installation scripts which require users or
# groups to be present before the files installed by the package are present on
# disk (for example because some files are owned by those users or groups).
#
# Example:
#   Source1: %{name}-sysusers.conf
#   ...                      
#   %install                 
#   install -D %SOURCE1 %{buildroot}%{_sysusersdir}/%{name}.conf
#   %pre
#   %sysusers_create_package %{name} %SOURCE1
#   %files
#   %{_sysusersdir}/%{name}.conf
#
%sysusers_create_package() \
/usr/bin/systemd-sysusers --replace=%_sysusersdir/%1.conf - <<SYSTEMD_INLINE_EOF || : \
%(cat %2) \
SYSTEMD_INLINE_EOF\
%{nil}

%sysctl_apply() \
[ -x /usr/lib/systemd/systemd-sysctl ] && \
	/usr/lib/systemd/systemd-sysctl %{?*} || : \
%{nil}

%binfmt_apply() \
[ -x /usr/lib/systemd/systemd-binfmt ] && \
	/usr/lib/systemd/systemd-binfmt %{?*} || : \
%{nil}

Places

File macros.systemd of Package systemd-rpm-macros (Revision a8f73dc11b38a900350a8ab96b95d755)

Places