openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File dbus-1.changes of Package dbus-1 (Revision 77e422b48a36a1a05078279cf5bb2886)

Currently displaying revision 77e422b48a36a1a05078279cf5bb2886 , Show latest

-------------------------------------------------------------------
Fri Jul  7 07:51:56 UTC 2017 - sflees@suse.de

- No need to set --libdir anymore now that prefix is /usr/bin, 
  * fixes boo#1047532
- No need to set --bindir, bindir in dbus-1-x11 was incorrect
- Other fixes required to properly change prefix
- Don't pass --with-initscripts we don't use them anymore.

-------------------------------------------------------------------
Fri Jun 30 02:27:21 UTC 2017 - sflees@suse.de

- Update to 1.10.20
  * Fixes:
    + Fix a reference leak when blocking on a pending call on a
      connection that has been disconnected (fdo#101481, Shin-ichi
      MORITA)
    + Don't put timestamps in the Doxygen-generated documentation,
      for closer-to-reproducible builds (fdo#100692, Simon
      McVittie)
    + Avoid an assertion failure when connecting to a
      semicolon-separated series of addresses, one of which fails
      (fdo#101257, Simon McVittie)
  * Documentation:
    + Update git URIs in HACKING document to sync up with
      cgit.freedesktop.org (fdo#100715, Simon McVittie)

-------------------------------------------------------------------
Tue Jun 13 07:42:17 UTC 2017 - sflees@suse.de

- swap to /usr/bin bsc#1029968  
- Add the following fixes from SLE12
  * bsc#980928 increase listen() backlog of AF_UNIX sockets to 
    SOMAXCONN fix-upstream-increase-backlog.patch
- The following bugs were already fixed but are missing changelog
  entries
  * bsc#867256 (No longer applicable)
  * bsc#916785 (No longer applicable)
  * bsc#1012564 (Not applicable)
  * fdo#90004 (Fixed Upstream)
- Rename the following patches as a tidy up
  * dbus-log-deny.patch to feature-suse-log-deny.patch
  * dbus-do-autolaunch.patch feature-suse-do-autolaunch.patch
  * 0001-Add-RefuseManualStartStop.patch to
    feature-suse-refuse-manual-start-stop.patch
  * 0001-Drop-Install-sections-from-user-services.patch to 
    fix-upstream-drop-install-sections-from-user-services.patch

-------------------------------------------------------------------
Fri Apr  7 05:54:09 UTC 2017 - fstrba@suse.com

- Update to 1.10.18
  * Fixes
    + Re-order dbus-daemon startup so that on SELinux systems, the
      thread that reads AVC notifications retains the ability to
      write to the audit log (fdo#92832, Debian #857660; Laurent
      Bigonville)
    + Fix a harmless read overflow and some memory leaks in a unit
      test (fdo#100568, Philip Withnall)

-------------------------------------------------------------------
Wed Mar  1 08:35:51 UTC 2017 - sflees@suse.de

- Update to 1.10.16
Fixes:
* Prevent symlink attacks in the nonce-tcp transport on Unix that could
  allow an attacker to overwrite a file named "nonce", in a directory
  that the user running dbus-daemon can write, with a random value
  known only to the user running dbus-daemon. This is unlikely to be
  exploitable in practice, particularly since the nonce-tcp transport
  is really only useful on Windows.
  (fd.o #99828, Simon McVittie) (bsc#1025950)

* Avoid symlink attacks in the "embedded tests", which are not enabled
  by default and should never be enabled in production builds of dbus.
  (fd.o #99828, Simon McVittie) (bsc#1025951)

* Work around an undesired effect of the fix for CVE-2014-3637
  (fd.o #80559), in which processes that frequently send fds, such as
  logind during a flood of new PAM sessions, can get disconnected for
  continuously having at least one fd "in flight" for too long;
  dbus-daemon interprets that as a potential denial of service attack.
  The workaround is to disable that check for uid 0 process such as
  logind, with a message in the system log. The bug remains open while
  we look for a more general solution.
  (fd.o #95263, LP#1591411; Simon McVittie)

* Don't run the test test-dbus-launch-x11.sh if X11 autolaunching
  was disabled at compile time. That test is not expected to work
  in that configuration. (fd.o #98665, Simon McVittie)

Enhancements:

* Do the Travis-CI build in Docker containers for Ubuntu LTS, Debian
  stable and Debian testing in addition to the older Ubuntu that is
  the default (fd.o #98889, Simon McVittie)

-------------------------------------------------------------------
Thu Feb  2 05:31:01 UTC 2017 - sflees@suse.de

- A note for scripts bsc#974092 (remove sysvinit script) is already
  fixed here.

-------------------------------------------------------------------
Wed Jan 25 00:49:03 UTC 2017 - sflees@suse.de

- Don't restart dbus on upgrade - Includes temporary work around
  for last version boo#1020301
- Add 0001-Add-RefuseManualStartStop.patch don't allow users to Manually
  start or stop dbus.

-------------------------------------------------------------------
Mon Jan  9 15:20:37 UTC 2017 - marius.kittler@suse.com

- Add systemd unit files to start session bus via systemd
- Added patch:
  * 0001-Drop-Install-sections-from-user-services.patch
    + remove install section from socket unit because it does not
      need to be enabled explicitly (see fdo#92402)

-------------------------------------------------------------------
Fri Dec  9 11:01:44 UTC 2016 - fstrba@suse.com

- Requires systemd >= 209 and drop the compatibility pkg-config
  names that don't exist in newer systemd

-------------------------------------------------------------------
Thu Dec  8 09:33:27 UTC 2016 - jengelh@inai.de

- Drop useless --with-pic which is only for static libs
- Abort installation when user/group creation fails
- Avoid calling %service_* more than once

-------------------------------------------------------------------
Tue Dec  6 09:53:07 UTC 2016 - fstrba@suse.com

- Build the dbus-1 package without X in the dbus-1.spec
- Move the dbus-launch.nox11 to the dbus-1 package and install
  it by default
- Build devel-doc package in dbus-1.spec and don't build any
  documentation in dbus-1-x11
- Make dbus-1-x11 package contains only the X11-enabled dbus-launch
- Fix some rpmlint warnings
- Delete the dbus-1-x11.spec.in file, since maintaining it is
  more complicated then keeping in sync a dbus-1-x11.spec file of
  less then 120 lines

-------------------------------------------------------------------
Mon Nov 21 17:54:06 CET 2016 - kukuk@suse.de

- Create new subpackage: dbus-1-nox11
  - contains dbus-launch without x11 support
- Rename dbus-launch to dbus-launch.x11
- use update-alternatives to switch between dbus-launch with and
  without X11
- Solves [bnc#934214]

-------------------------------------------------------------------
Tue Oct 11 07:33:15 UTC 2016 - fstrba@suse.com

- Update to 1.10.12
  * Security fixes:
    + Do not treat ActivationFailure message received from
      root-owned systemd name as a format string. In principle this
      is a security vulnerability, but we do not believe it is
      exploitable in practice, because only privileged processes can
      own the org.freedesktop.systemd1 bus name, and systemd does
      not appear to send activation failures that contain "%".
      Please note that this probably *was* exploitable in dbus
      versions older than 1.6.30, 1.8.16 and 1.9.10 due to a missing
      check which at the time was only thought to be a denial of
      service vulnerability (CVE-2015-0245). If you are still
      running one of those versions, patch or upgrade immediately.
      (fdo#98157, bsc#1003898, Simon McVittie)
  * Other fixes:
    + Harden dbus-daemon against malicious or incorrect
      ActivationFailure messages by rejecting them if they do not
      come from a privileged process, or if systemd activation is
      not enabled (fdo#98157, Simon McVittie)
    + Avoid undefined behaviour when setting reply serial number
      without going via union DBusBasicValue (fdo#98035, Marc Mutz)
    + autogen.sh: fail cleanly if autoconf fails (Simon McVittie)

-------------------------------------------------------------------
Tue Sep 13 14:40:21 UTC 2016 - mvidner@suse.com

- Moved dbus-run-session from dbus-1-x11 to dbus-1 (bdo#836296)

-------------------------------------------------------------------
Mon Aug 22 09:08:03 UTC 2016 - fstrba@suse.com

- Update to 1.10.10
  * Fixes:
    + On Linux, when dbus-daemon is run with reduced susceptibility
      to the OOM killer (typically via systemd), do not let child
      processes inherit that setting (fdo#32851;
      Kimmo Hämäläinen, WaLyong Cho)
    + Output valid shell syntax in ~/.dbus/session-bus/ if the bus
      address contains a semicolon (fdo#94746, Thiago Macieira)
    + Fix memory leaks and thread safety in subprocess starting on
      Windows (fdo#95191, Ralf Habacker)
    + Do not require systemd to have a service file if using it for
      activation (fdo#93194; Simon McVittie; backport from 1.11.0)
    + Stop test-dbus-daemon incorrectly failing on platforms that
      cannot discover the process ID of clients (fdo#96653,
      Руслан Ижбулатов)
    + In tests that exercise correct handling of crashing D-Bus
      services, suppress Windows crash handler (fdo#95155;
      Yiyang Fei, Ralf Habacker)
    + Explicitly check for stdint.h (Ioan-Adrian Ratiu)
    + update-activation-environment: produce better diagnostics on
      error (fdo#96653, Simon McVittie)
    + Don't fail the build with an unused const variable warning
      under gcc 6 (fdo#97282; Thomas Zimmermann, Simon McVittie)
    + Merge dbus-1.10-ci branch, containing backports from 1.11.0
      in build/test code to support continuous integration
      (fdo#93194, Simon McVittie)
      - Avoid -Wunused-label when compiling with libselinux but no
        libaudit
      - In development builds, allow OOM tests to be disabled as
        documented
      - Accept and ignore the --tap argument in all "embedded
        tests", and run all automated tests with that argument for
        better diagnostics
      - Fix the systemd activation test under CMake by installing
        the required files
      - In Automake, fix shell syntax for installcheck-local with
        no DESTDIR
      - In Automake, don't try to run manual tests in installcheck
      - In CMake, don't run manual-tcp test as an automated test
      - Add travis-ci.org build machinery

-------------------------------------------------------------------
Mon Mar 14 11:38:08 UTC 2016 - fstrba@suse.com

- Update to 1.10.8
  * Fixes:
    + Enable "large file support" on systems where it exists:
      dbus-daemon is not expected to open large files, but it might
      need to stat files that happen to have large inode numbers
      (fdo#93545, Hongxu Jia)
    + Eliminate padding inside DBusMessageIter on 64-bit platforms,
      which might result in a pedantic C compiler not copying the
      entire contents of a DBusMessageIter; statically assert that
      this is not an ABI change in practice (fdo#94136, Simon
      McVittie)
    + Document dbus-test-tool echo --sleep-ms=N instead of
      incorrect --sleep=N (fdo#94244, Dmitri Iouchtchenko)
    + Correctly report test failures in C tests from run-test.sh
      (fdo#93379; amit tewari, Simon McVittie)
    + When tests are enabled, run all the marshal-validate tests,
      not just the even-numbered ones (fdo#93908, Nick Lewycky)
    + Correct the expected error from one marshal-validate test,
      which was previously not run due to the above bug(fdo#93908,
      Simon McVittie)

-------------------------------------------------------------------
Thu Dec  3 14:48:58 UTC 2015 - fstrba@suse.com

- Update to 1.10.6
  * Fixes:
    - On Unix when running tests as root, don't assert that root
      and the dbus-daemon user can still call
      UpdateActivationEnvironment; assert that those privileged
      users can call BecomeMonitor instead (fdo#93036, Simon
      McVittie)
    - On Windows, fix a memory leak in the autolaunch transport
      (fdo#92899, Simon McVittie)
    - On Windows Autotools builds, don't run tests that rely on
      dbus-run-session and other Unix-specifics (fdo#92899, Simon
      McVittie)

-------------------------------------------------------------------
Thu Nov 26 08:24:14 UTC 2015 - fstrba@suse.com

- Update to 1.10.4
  * Changes between 1.10.2 and 1.10.4
    - Enhancements:
      + GetConnectionCredentials, GetConnectionUnixUser and
        GetConnectionUnixProcessID with argument
        "org.freedesktop.DBus" will now return details of the
        dbus-daemon itself. This is required to be able to call
        SetEnvironment on systemd. (fdo#92857, Jan Alexander
        Steffens)
    - Fixes:
      + Make UpdateActivationEnvironment always fail with
        AccessDenied  on the system bus. Previously, it was
        possible to configure it so root could call it, but the
        environment variables were not actually used, because the
        launch helper would discard them. (fdo#92857, Jan Alexander
        Steffens)
      + On Unix with --systemd-activation on a user bus, make
        UpdateActivationEnvironment pass on its arguments to
        systemd's SetEnvironment method, solving inconsistency
        between the environments used for traditional activation
        and systemd user-service activation. (fdo#92857, Jan
        Alexander Steffens)
      + On Windows, don't crash if <syslog/> or --syslog is used
        (fdo#92538, Ralf Habacker)
      + On Windows, fix a memory leak when setting a DBusError from
        a Windows error (fdo#92721, Ralf Habacker)
      + On Windows, don't go into infinite recursion if we abort the
        process with backtraces enabled (fdo#92721, Ralf Habacker)
      + Fix various failing tests, variously on Windows and
        cross-platform:
        . don't test system.conf features (users, groups) that only
          make sense on the system bus, which is not supported on
          Windows
        . don't call _dbus_warn() when we skip a test, since it is
          fatal
        . fix computation of expected <standard_session_servicedirs/>
        . when running TAP tests, translate newlines to Unix format,
          fixing cross-compiled tests under Wine on Linux
        . don't stress-test refcounting under Wine, where it's
          really slow
        . stop assuming that a message looped-back to the test will
          be received immediately
        . skip some system bus tests on Windows since they make no
          sense there (fdo#92538, fdo#92721; Ralf Habacker, Simon
          McVittie)
  * Changes between 1.10.0 and 1.10.2
    - Fixes:
      + Correct error handling for activation: if there are multiple
        attempts to activate the same service and it fails
        immediately, the first attempt would get the correct reply,
        but the rest would time out. We now send the same error
        reply to each attempt. (fdo#92200, Simon McVittie)
      + If BecomeMonitor is called with a syntactically invalid
        match rule, don't crash with an assertion failure, fixing a
        regression in 1.9.10. This was not exploitable as a denial
        of service, because the check for a privileged user is done
        first. (fdo#92298, Simon McVittie)
      + On Linux with --enable-user-session, add the bus address to
        the environment of systemd services for better backwards
        compatibility (fdo#92612, Jan Alexander Steffens)
      + On Windows, fix the logic for replacing the installation
        prefix in service files' Exec lines (fdo#83539; Milan Crha,
        Simon McVittie)
      + On Windows, if installed in the conventional layout with
        ${prefix}/etc and ${prefix}/share, use relative paths
        between bus configuration files to allow the tree to be
        relocated (fdo#92028, Simon McVittie)
      + Make more of the regression tests pass in Windows builds
        (fdo#92538, Simon McVittie)
  * Summary of major changes since 1.8.0:
    - The basic setup for the well-known system and session buses is
      now done in read-only files in ${datadir} (normally /usr/share).
    - AppArmor integration has been merged, with features similar to
      the pre-existing SELinux integration. It is mostly compatible
      with the patches previously shipped by Ubuntu, with one
      significant change: Ubuntu's GetConnectionAppArmorSecurityContext
      method has been superseded by GetConnectionCredentials and was
      not included.
    - The --enable-user-session configure option can be enabled
      by OS integrators intending to use systemd to provide a
      session bus per user (in effect, treating all concurrent
      graphical and non-graphical login sessions as one large session).
    - The new listenable address mode "unix:runtime=yes" listens on
      $XDG_RUNTIME_DIR/bus, the same AF_UNIX socket used by the
      systemd user session. libdbus and "dbus-launch --autolaunch"
      will connect to this address by default. GLib >= 2.45.3 and
      sd-bus >= 209 have a matching default.
    - All executables are now dynamically linked to libdbus-1.
      Previously, some executables, most notably dbus-daemon, were
      statically linked to a specially-compiled variant of libdbus.
      This results in various private functions in the _dbus
      namespace being exposed by the shared library. These are not
      API, and must not be used outside the dbus source tree.
    - On platforms with ELF symbol versioning, all public symbols
      are versioned LIBDBUS_1_3.
  * New bus APIs:
    - org.freedesktop.DBus.GetConnectionCredentials returns
      LinuxSecurityLabel where supported
    - org.freedesktop.DBus.Monitoring interface (privileged)
      . BecomeMonitor method supersedes match rules with eavesdrop=true,
        which are now deprecated
    - org.freedesktop.DBus.Stats interface (semi-privileged)
      . now enabled by default
      . new GetAllMatchRules method
    - org.freedesktop.DBus.Verbose interface (not normally compiled)
      . toggles the effect of DBUS_VERBOSE
  * New executables:
    - dbus-test-tool
    - dbus-update-activation-environment
  * New optional dependencies:
    - The systemd: pseudo-transport requires libsystemd or libsd-daemon
    - Complete documentation requires Ducktype and yelp-tools
    - Full test coverage requires GLib 2.36 and PyGI
    - AppArmor integration requires libapparmor and optionally libaudit
  * Dependencies removed:
    - dbus-glib

-------------------------------------------------------------------
Tue Nov 17 09:27:27 UTC 2015 - fstrba@suse.com

- Update to 1.8.20:
  * Fixes:
    - Fix a memory leak when GetConnectionCredentials() succeeds
      (fdo#91008, Jacek Bukarewicz)
    - Ensure that dbus-monitor does not reply to messages intended
      for others (fdo#90952, Simon McVittie)

-------------------------------------------------------------------
Wed Sep 16 13:26:55 UTC 2015 - fstrba@suse.com

- Account for openSUSE:Leap in the conditional for chosing right
  local state directories (boo#941352)

-------------------------------------------------------------------
Wed May 27 17:00:54 UTC 2015 - hrvoje.senjan@gmail.com

- Move common-begin sections around to make pre_checkin work again
- Unconditionally build with systemd features, there are no cycles
  now, systemd no longer buildrequires dbus-1-devel

-------------------------------------------------------------------
Mon May 18 10:05:14 UTC 2015 - fstrba@suse.com

- Update to 1.8.18:
  * Security hardening:
    - On Unix platforms, change the default configuration for the
      session bus to only allow EXTERNAL authentication (secure
      kernel-mediated credentials-passing), as was already done for
      the system bus.
      This avoids falling back to DBUS_COOKIE_SHA1, which relies on
      strongly unpredictable pseudo-random numbers; under certain
      circumstances (/dev/urandom unreadable or malloc() returns
      NULL), dbus could fall back to using rand(), which does not
      have the desired unpredictability. The fallback to rand() has
      not been changed in this stable-branch since the necessary
      code changes for correct error-handling are rather intrusive.
      If you are using D-Bus over the (unencrypted!) tcp: or
      nonce-tcp: transport, in conjunction with DBUS_COOKIE_SHA1
      and a shared home directory using NFS or similar, you will
      need to reconfigure the session bus to accept DBUS_COOKIE_SHA1
      by commenting out the <auth> element. This configuration is
      not recommended. (bsc#931066, fdo#90414, Simon McVittie)
  * Other fixes:
    - Add locking to DBusCounter's reference count and notify
      function (fdo#89297, Adrian Szyndela)
    - Ensure that DBusTransport's reference count is protected by
      the corresponding DBusConnection's lock (fdo#90312,
      Adrian Szyndela)
    - On Windows, listen on the same port for IPv4 and IPv6
      (previously broken by an endianness mistake), and fix a
      failure to bind TCP sockets on approximately 1 attempt in 256
      (fdo#87999, Ralf Habacker)
    - Correctly release DBusServer mutex before early-return if we
      run out of memory while copying authentication mechanisms
      (fdo#90021, Ralf Habacker)
    - Correctly initialize all fields of DBusTypeReader (fdo#90021,
      Ralf Habacker, Simon McVittie)
    - Fix some missing \n in verbose (debug log) messages
      (fdo#90021, Ralf Habacker)
    - Clean up some memory leaks in test code (fdo#90021,
      Ralf Habacker)

-------------------------------------------------------------------
Thu Mar 26 11:04:22 UTC 2015 - fstrba@suse.com

- Sync changes from SLE12 conditionalized for suse_version <= 1315

-------------------------------------------------------------------
Mon Feb  9 19:37:23 UTC 2015 - fstrba@suse.com

- Update to 1.8.16:
  * Security fixes:
    - Do not allow non-uid-0 processes to send forged
      ActivationFailure messages. On Linux systems with systemd
      activation, this would allow a local denial of service:
      unprivileged processes could flood the bus with these forged
      messages, winning the race with the actual service activation
      and causing an error reply to be sent back when service
      auto-activation was requested. This does not prevent the real
      service from being started, so it only works while the real
      service is not running. (CVE-2015-0245, fdo#88811, bnc#916343;
      Simon McVittie)
  * Other fixes:
    - fix a Windows build failure (fdo#88009, Ralf Habacker)
    - on Windows, allow up to 8K connections to the dbus-daemon
      instead of the previous 64, completing a previous fix which
      only worked under Autotools (fdo#71297, Ralf Habacker)

-------------------------------------------------------------------
Tue Jan  6 07:57:14 UTC 2015 - fstrba@suse.com

- Update to 1.8.14
  * Security hardening:
    - Do not allow calls to UpdateActivationEnvironment from uids
      other than the uid of the dbus-daemon. If a system service
      installs unsafe security policy rules that allow arbitrary
      method calls (such as CVE-2014-8148) then this prevents
      memory consumption and possible privilege escalation via
      UpdateActivationEnvironment.
      We believe that in practice, privilege escalation here is
      avoided by dbus-daemon-launch-helper sanitizing its
      environment; but it seems better to be safe.
    - Do not allow calls to UpdateActivationEnvironment or the
      Stats interface on object paths other than
      /org/freedesktop/DBus. Some system services install unsafe
      security policy rules that allow arbitrary method calls to
      any destination, method and interface with a specified object
      path; while less bad than allowing arbitrary method calls,
      these security policies are still harmful, since dbus-daemon
      normally offers the same API on all object paths and other
      system services might behave similarly.
  * Other fixes:
    - Add missing initialization so GetExtendedTcpTable doesn't
      crash on Windows Vista SP0 (fdo#77008, Ilya A. Tkachenko)

-------------------------------------------------------------------
Tue Nov 25 07:43:12 UTC 2014 - fstrba@suse.com

- Update to 1.8.12:
  * Fixes:
    - Partially revert the CVE-2014-3639 patch by increasing the
      default authentication timeout on the system bus from 5
      seconds back to 30 seconds, since this has been reported to
      cause boot regressions for some users, mostly with parallel
      boot (systemd) on slower hardware.
      On fast systems where local users are considered particularly
      hostile, administrators can return to the 5 second timeout
      (or any other value in milliseconds) by saving this as
      /etc/dbus-1/system-local.conf:
      <busconfig>
        <limit name="auth_timeout">5000</limit>
      </busconfig>
      (fdo#86431, Simon McVittie)
    - Add a message in syslog/the Journal when the auth_timeout is
      exceeded (fdo#86431, Simon McVittie)
    - Send back an AccessDenied error if the addressed recipient is
      not allowed to receive a message (and in builds with
      assertions enabled, don't assert under the same conditions).
      (fdo#86194, Jacek Bukarewicz)

-------------------------------------------------------------------
Mon Nov 10 16:26:24 UTC 2014 - fstrba@suse.com

- Update to 1.8.10:
  * Security fixes:
    - Increase dbus-daemon's RLIMIT_NOFILE rlimit to 65536
      so that CVE-2014-3636 part A cannot exhaust the system bus'
      file descriptors, completing the incomplete fix in 1.8.8.
      (CVE-2014-7824, fdo#85105; Simon McVittie, Alban Crequy)

-------------------------------------------------------------------
Tue Sep 30 08:20:50 UTC 2014 - fstrba@suse.com

- Reformat the spec file using spec-cleaner

-------------------------------------------------------------------
Thu Sep 18 09:14:28 UTC 2014 - fstrba@suse.com

- Update baselibs.conf: Provides dbus-1-32bit in lib package

-------------------------------------------------------------------
Tue Sep 16 16:21:06 UTC 2014 - fstrba@suse.com

- Update to 1.8.8:
  + Security fixes:
    - Do not accept an extra fd in the padding of a cmsg message,
      which could lead to a 4-byte heap buffer overrun. (CVE-2014-3635,
      fdo#83622, bnc#896453; Simon McVittie)
    - Reduce default for maximum Unix file descriptors passed per
      message from 1024 to 16, preventing a uid with the default maximum
      number of connections from exhausting the system bus' file
      descriptors under Linux's default rlimit. Distributors or system
      administrators with a more restrictive fd limit may wish to reduce
      these limits further.
      Additionally, on Linux this prevents a second denial of service
      in which the dbus-daemon can be made to exceed the maximum number
      of fds per sendmsg() and disconnect the process that would have
      received them. (CVE-2014-3636, fdo#82820, bnc#896453; Alban Crequy)
    - Disconnect connections that still have a fd pending unmarshalling
      after a new configurable limit, pending_fd_timeout (defaulting to
      150 seconds), removing the possibility of creating an abusive
      connection that cannot be disconnected by setting up a circular
      reference to a connection's file descriptor. (CVE-2014-3637,
      fdo#80559, bnc#896453; Alban Crequy)
    - Reduce default for maximum pending replies per connection from
      8192 to 128, mitigating an algorithmic complexity
      denial-of-service attack (CVE-2014-3638, fdo#81053, bnc#896453;
      Alban Crequy)
    - Reduce default for authentication timeout on the system bus from
      30 seconds to 5 seconds, avoiding denial of service by using up
      all unauthenticated connection slots; and when all unauthenticated
      connection slots are used up, make new connection attempts block
      instead of disconnecting them. (CVE-2014-3639, fdo#80919,
      bnc#896453; Alban Crequy)
  + Other fixes:
    - Check for libsystemd from systemd >= 209, falling back to the
      older separate libraries if not found (Umut Tezduyar Lindskog,
      Simon McVittie)
    - On Linux, use prctl() to disable core dumps from a test executable
      that deliberately raises SIGSEGV to test dbus-daemon's handling
      of that condition (fdo#83772, Simon McVittie)
    - Fix compilation with --enable-stats (fdo#81043, Gentoo #507232;
      Alban Crequy)
    - Improve documentation for running tests on Windows (fdo#41252,
       Ralf Habacker)

-------------------------------------------------------------------
Sat Jul 19 00:30:57 UTC 2014 - crrodriguez@opensuse.org

- Remove all remains of sysvinit compatibility.
- Do not force-fed -fstack-protector in CFLAGS, already there
  and obsoleted by stack-protector-strong in gcc 4.9.
- Ensure doxygen never generates timestampted html docs.

-------------------------------------------------------------------
Thu Jul 10 14:00:06 UTC 2014 - fcrozat@suse.com

- Update baselibs.conf: Obsoletes dbus-1-32bit in lib package.

-------------------------------------------------------------------
Wed Jul  2 16:15:37 UTC 2014 - fstrba@suse.com

- Update to 1.8.6:
  + Security fixes:
    - On Linux >= 2.6.37-rc4, if sendmsg() fails with ETOOMANYREFS,
      silently drop the message. This prevents an attack in which
      a malicious client can make dbus-daemon disconnect a system
      service, which is a local denial of service.
      (bnc#885241 fdo#80163, CVE-2014-3532; Alban Crequy)
    - Track remaining Unix file descriptors correctly when more
      than one message in quick succession contains fds. This
      prevents another attack in which a malicious client can make
      dbus-daemon disconnect a system service.
      (bnc#885241 fdo#79694, fd0#80469, CVE-2014-3533; Alejandro
      Martínez Suárez, Simon McVittie, Alban Crequy)
  + Other fixes:
    - When dbus-launch --exit-with-session starts a dbus-daemon but
      then cannot attach to a session, kill the dbus-daemon as
      intended (fdo#74698, Роман Донченко)

-------------------------------------------------------------------
Wed Jun 11 04:58:38 UTC 2014 - fstrba@suse.com

- Update to 1.8.4:
  + Security fix:
    - Alban Crequy at Collabora Ltd. discovered and fixed a
      denial-of-service flaw in dbus-daemon, part of the reference
      implementation of D-Bus.
      Additionally, in highly unusual environments the same flaw
      could lead to a side channel between processes that should
      not be able to communicate. (CVE-2014-3477, fdo#78979,
      bnc#881137)

-------------------------------------------------------------------
Sat May  3 17:21:00 UTC 2014 - hrvoje.senjan@gmail.com

- Update to 1.8.2:
  + Enhancements:
    - in the CMake build system, add some hints for Linux users
      cross-compiling Windows D-Bus binaries to be able to run
      tests under Wine (fdo#41252)
    - add Documentation key to dbus.service (fdo#77447)
  + Fixes:
    - in "dbus-uuidgen --ensure", try to copy systemd's
      /etc/machine-id to /var/lib/dbus/machine-id instead
      of generating an entirely new ID (fdo#77941)
    - if dbus-launch receives an X error very quickly, do not kill
      unrelated processes (fdo#74698)
    - on Windows, allow up to 8K connections to the dbus-daemon,
      instead of the previous 64 (fdo#71297)
    - cope with \r\n newlines in regression tests, since on
      Windows, dbus-daemon.exe uses text mode (fdo#75863)

-------------------------------------------------------------------
Mon Jan 20 22:08:24 UTC 2014 - hrvoje.senjan@gmail.com

- Update to 1.8.0 final:
  + This starts a new stable branch. The 1.6.x branch is now
    considered to be outdated, and will only receive fixes for
    serious bugs such as security flaws. The 1.4.x and 1.2.x branches
    no longer have upstream support and are unlikely to get any more
    releases, but if distributors still need to support them,
    please share security patches via upstream.
  + Enhancements since 1.7.10:
    - Enhance the CMake build system to check for GLib and
      compile/run a subset of the regression tests (fdo#41252,
      fdo#73495)
  + Fixes since 1.7.10:
    - don't rely on va_copy(), use DBUS_VA_COPY() wrapper (fdo#72840)
    - fix compilation of systemd journal support on older systemd
      versions where sd-journal.h doesn't include syslog.h (fdo#73455)
    - fix compilation on older MSVC versions by including stdlib.h
      (fdo#73455)
    - Allow <allow_anonymous/> to appear in an included configuration
      file (fdo#73475)
  + Test behaviour changes since 1.7.10:
    - If the tests crash with an assertion failure, they no longer
      default to blocking for a debugger to be attached. Set
      DBUS_BLOCK_ON_ABORT in the environment if you want the old
      behaviour.
    - To improve debuggability, the dbus-daemon and
      dbus-daemon-eavesdrop tests can be run with an external
      dbus-daemon by setting DBUS_TEST_DAEMON_ADDRESS in the
      environment. Test-cases that require an unusually-configured
      dbus-daemon are skipped.

-------------------------------------------------------------------
Fri Jan 10 17:00:52 UTC 2014 - hrvoje.senjan@gmail.com

- Remove checks for obsolete openSUSE versions
- Make sure that dbus-1 requires libdbus-1-3 during %post (detected
  when built against DBus-less systemd 209)

-------------------------------------------------------------------
Thu Jan  9 17:33:31 UTC 2014 - fridrich.strba@suse.com

- Try hard to assure that /var/lib/dbus/machine-id and
  /etc/machine-id are the same (bnc#857377)

-------------------------------------------------------------------
Tue Jan  7 08:17:17 UTC 2014 - fridrich.strba@suse.com

- Update to 1.7.10 (1.8.0 rc1)
  + D-Bus Specification 0.23:
    - don't require messages with no INTERFACE to be dispatched
      (fdo#68597)
    - document "tcp:bind=..." and "nonce-tcp:bind=..." (fdo#72301)
    - define "listenable" and "connectable" addresses, and discuss
      the difference (fdo#61303)
  + Enhancements:
    - support printing Unix file descriptors in dbus-send,
       dbus-monitor (fdo#70592)
    - don't install systemd units if --disable-systemd is given
      (fdo#71818)
  + Fixes:
    - don't leak memory on out-of-memory while listing activatable
      or active services (fdo#71526)
    - fix undefined behaviour in a regression test (fdo#69924)
    - escape Unix socket addresses correctly (fdo#46013)
    - on SELinux systems, don't assume that SECCLASS_DBUS,
      DBUS__ACQUIRE_SVC and DBUS__SEND_MSG are numerically equal to
      their values in the reference policy (fdo#88719)
    - define PROCESS_QUERY_LIMITED_INFORMATION if missing from
      MinGW < 4 headers (fdo#71366)
    - define WIN32_LEAN_AND_MEAN to avoid conflicts between
      winsock.h and winsock2.h (fdo#71405)
    - do not return failure from _dbus_read_nonce() with no error
      set, preventing a potential crash (fdo#72298)
    - on BSD systems, avoid some O(1)-per-process memory and fd
      leaks in kqueue, preventing test failures
      (fdo#69332, fdo#72213)
    - fix warning spam on Hurd by not trying to set SO_REUSEADDR
      on Unix sockets, which doesn't do anything anyway on at least
      Linux and FreeBSD (fdo#69492)
    - fix use of TCP sockets on FreeBSD and Hurd by tolerating
      EINVAL from sendmsg() with SCM_CREDS (retrying with plain
      send()), and looking for credentials more correctly
      (fdo#69492)
    - ensure that tests run with a temporary XDG_RUNTIME_DIR to
      avoid getting mixed up in XDG/systemd "user sessions"
      (fdo#61301)
    - refresh cached policy rules for existing connections when bus
      configuration changes (fdo#39463)

-------------------------------------------------------------------
Wed Nov 20 21:30:25 UTC 2013 - hrvoje.senjan@gmail.com

- Drop the dbus-fall-back-to-old-run-directory.patch, and the sed
  workaround from dbus-1-x11 %post, now that transition from 12.3
  (/var/run) to 13.1 (/run) is done

-------------------------------------------------------------------
Fri Nov  1 21:31:19 UTC 2013 - hrvoje.senjan@gmail.com

- Update to 1.7.8
  + Dependencies:
    - If systemd support is enabled, libsystemd-journal is
      now required.
  + Enhancements:
    - When activating a non-systemd service under systemd,
      annotate its stdout/stderr with its bus name in the Journal.
      Known limitation: because the socket is opened before forking,
      the process will still be logged as if it had dbus-daemon's
      process ID and user ID. (fdo#68559)
    - Document more configuration elements in dbus-daemon(1)
      (fdo#69125)
  + Fixes:
    - Don't leak string arrays or fds if
      dbus_message_iter_get_args_valist() unpacks them and then
      encounters an error (fdo#21259)
    - If compiled with libaudit, retain CAP_AUDIT_WRITE so we
      can write disallowed method calls to the audit log,
      fixing a regression in 1.7.6 (fdo#49062)
    - path_namespace='/' in match rules incorrectly matched nothing;
      it now matches everything. (fdo#70799)

-------------------------------------------------------------------
Wed Oct  9 18:52:01 UTC 2013 - hrvoje.senjan@gmail.com

- Update to 1.7.6
  + Build-time configuration changes:
    - Directory change notification via dnotify on Linux is no
      longer supported; it hadn't compiled successfully since 2010
      in any case. If you don't have inotify (Linux) or kqueue (*BSD),
      you will need to send SIGHUP to the dbus-daemon when its
      configuration changes. (fdo#33001)
    - Compiling with --disable-userdb-cache is no longer supported;
      it didn't work since at least 2008, and would lead to an
      extremely slow dbus-daemon even it worked.
      (fdo#15589,fdo#17133,fdo#66947)
    - The DBUS_DISABLE_ASSERTS CMake option didn't actually disable
      most assertions. It has been renamed to DBUS_DISABLE_ASSERT
      to be consistent with the Autotools build system. (fdo#66142)
    - --with-valgrind=auto enables Valgrind instrumentation if and only
      if valgrind headers are available. The default is still
      --with-valgrind=no. (fdo#56925)
  + Dependencies:
    - Platforms with no 64-bit integer type are no longer supported.
      (fdo#65429)
    - GNU make is now (documented to be) required. (fdo#48277)
    - Full test coverage no longer requires dbus-glib, although the
      tests do not exercise the shared library (only a static copy)
      if dbus-glib is missing. (fdo#68852)
  + Enhancements:
    - D-Bus Specification 0.22
    - Document GetAdtAuditSessionData() and
      GetConnectionSELinuxSecurityContext() (fdo#54445)
    - Fix example .service file (fdo#66481)
    - Don't claim D-Bus is "low-latency" (lower than what?), just
      give factual statements about it supporting async use (fdo#65141)
    - Document the contents of .service files, and the fact that
      system services' filenames are constrained (fdo#66608)
    - Be thread-safe by default on all platforms, even if
      dbus_threads_init_default() has not been called. For
      compatibility with older libdbus, library users should
      continue to call dbus_threads_init_default(): it is
      harmless to do so. (fdo#54972)
    - Add GetConnectionCredentials() method (fdo#54445)
    - New API: dbus_setenv(), a simple wrapper around setenv().
      Note that this is not thread-safe. (fdo#39196,)
    - Add dbus-send --peer=ADDRESS (connect to a given peer-to-peer
      connection, like --address=ADDRESS in previous versions) and
      dbus-send --bus=ADDRESS (connect to a given bus, like
      dbus-monitor --address=ADDRESS). dbus-send --address still
      exists for backwards compatibility, but is no longer documented.
      (fdo#48816)
  + Fixes:
    - Avoid an infinite busy-loop if a signal interrupts waitpid()
     (fdo#68945)
    - Clean up memory for parent nodes when objects are unexported
      (fdo#60176)
    - Make dbus_connection_set_route_peer_messages(x, FALSE) behave
      as documented. Previously, it assumed its second
      parameter was TRUE. (fdo#69165)
    - Escape addresses containing non-ASCII characters correctly
      (fdo#53499)
    - Document <servicedir> search order correctly (fdo#66994)
    - Don't crash on "dbus-send --session / x.y.z" which regressed
      in 1.7.4. (fdo#65923)
    - If malloc() returns NULL in _dbus_string_init() or similar,
      don't free an invalid pointer if the string is later freed
      (fdo#65959)
    - If malloc() returns NULL in dbus_set_error(), don't va_end()
      a va_list that was never va_start()ed (fdo#66300)
    - fix build failure with --enable-stats (fdo#66004)
    - fix a regression test on platforms with strict alignment
      (fdo#67279)
    - Avoid calling function parameters "interface" since certain
      Windows headers have a namespace-polluting macro of that name
      (fdo#66493)
    - Assorted Doxygen fixes (fdo#65755)
    - Various thread-safety improvements to static variables
      (fdo#68610)
    - Make "make -j check" work (fdo#68852)
    - Fix a NULL pointer dereference on an unlikely error path
      (fdo#69327)
    - Improve valgrind memory pool tracking (fdo#69326)
    - Don't over-allocate memory in dbus-monitor (fdo#69329)
    - dbus-monitor can monitor dbus-daemon < 1.5.6 again
      (fdo#66107)
  + Unix-specific:
    - If accept4() fails with EINVAL, as it can on older Linux
      kernels with newer glibc, try accept() instead of going
      into a busy-loop. (fdo#69026)
    - If socket() or socketpair() fails with EINVAL or EPROTOTYPE,
      for instance on Hurd or older Linux with a new glibc, try
      without SOCK_CLOEXEC. (fdo#69073)
    - Fix a file descriptor leak on an error code path.
      (fdo#69182)
    - dbus-run-session: clear some unwanted environment variables
      (fdo#39196)
    - dbus-run-session: compile on FreeBSD (fdo#66197)
    - Don't fail the autolaunch test if there is no DISPLAY
      (fdo#40352)
    - Use dbus-launch from the builddir for testing, not the
      installed copy (fdo#37849)
    - Fix compilation if writev() is unavailable (fdo#69409)
    - Remove broken support for LOCAL_CREDS credentials passing, and
      document where each credential-passing scheme is used
      (fdo#60340)
    - Make autogen.sh work on *BSD by not assuming GNU coreutils
      functionality (fdo#35881, fdo#69787)
    - dbus-monitor: be portable to NetBSD (fdo#69842)
    - dbus-launch: stop using non-portable asprintf (fdo#37849)
    - Improve error reporting from the setuid activation helper
      (fdo#66728)
  + Internal changes:
    - add DBUS_ENABLE_ASSERT, DBUS_ENABLE_CHECKS for less confusing
    conditionals (fdo#66142)
    - improve verbose-mode output (fdo#63047)
    - consolidate Autotools and CMake build (fdo#64875)
    - fix various unused variables, unusual build configurations etc.
      (fdo#65712, fdo#65990, fdo#66005, fdo#66257, fdo#69165, fdo#69410,
      fdo#70218)
- Dropped 0001-_dbus_babysitter_unref-avoid-infinite-loop-if-waitpi.patch,
  included in this release

-------------------------------------------------------------------
Mon Oct  7 08:18:23 UTC 2013 - fridrich.strba@suse.com

- Create /var/lib/dbus/machine-id only if there is no /etc/machine-id
  present on the system. Dbus knows how to use the system-wide
  machine-id file and this solves problems where the two files have
  different values (bnc#831626)

-------------------------------------------------------------------
Fri Oct  4 15:43:21 UTC 2013 - hrvoje.senjan@gmail.com

- Check for existence of /var/lib/old_run_path: if found, only then
  is dbus ListenStream swapped for old run path. This is done for
  supporting 12.3 to 13.1 upgrade (bnc#802525)
- Fix rpmlint warnings about %verifyscript and %set_permissions

-------------------------------------------------------------------
Sun Sep 29 15:56:31 UTC 2013 - hrvoje.senjan@gmail.com

- Revert to previous version of dbus-fall-back-to-old-run-directory.patch
  as latest version causes a fallout

-------------------------------------------------------------------
Wed Sep 25 17:34:53 CEST 2013 - hpj@suse.com

- Amend dbus-fall-back-to-old-run-directory.patch to prevent a
  new class of hangs while upgrading D-Bus along with other
  services (bnc#802525).

-------------------------------------------------------------------
Sat Sep  7 20:17:40 UTC 2013 - hrvoje.senjan@gmail.com

- Added 0001-_dbus_babysitter_unref-avoid-infinite-loop-if-waitpi.patch
  from upstream for resolving fdo#68945, bnc#782909

-------------------------------------------------------------------
Tue Jun 25 14:09:30 UTC 2013 - coolo@suse.com

- to avoid a cycle with systemd, build the daemon in dbus-x11.spec.
  It would be wise to rename dbus-1.spec to dbus-1-libs.spec and
  dbus-1-x11.spec to dbus-1.spec, but I first wanted to hear feedback

-------------------------------------------------------------------
Sat Jun 22 22:01:17 UTC 2013 - hrvoje.senjan@gmail.com

- Update to 1.7.4
  + CVE-2013-2168: Fix misuse of va_list that could be used as a
    denial of service for system services.
  + It should now be safe to call dbus_threads_init_default() from
    any thread, at any time
  + In dbus-daemon, don't crash if a .service file starts with
    key=value
  + Fix an assertion failure if we try to activate systemd services
    before systemd connects to the bus (fdo#50199)
- Adjusted dbus-do-autolaunch.patch for this release

-------------------------------------------------------------------
Sat Jun 22 18:27:19 UTC 2013 - hrvoje.senjan@gmail.com

- Remove the override that was added in solving bnc#802525, as it
  causes similar situation when upgrading dbus and systemd
  simultaneously.
- Adjusted rc.boot.dbus script so it uses /run instead of /var/run

-------------------------------------------------------------------
Thu Apr 25 21:02:26 UTC 2013 - hrvoje.senjan@gmail.com

- Update to 1.7.2
  + Diagnose incorrect use of dbus_connection_get_data() with negative
    slot (i.e. before allocating the slot) rather than returning junk
    (fdo #63127)
  + The --with-dbus-session-bus-default-address configure option is no
    longer supported
  + Under systemd, log to syslog only, not stderr, avoiding duplication
    (fdo#61399, fdo#39987)
  + Under systemd, remove unnecessary dependency on syslog.socket
    (fdo#63531)
  + Allow use of systemd-logind without the rest of systemd
    (fdo#62585)
- Dropped dbus-move-everything-to-run-directory.patch, since we can
  define location of system pid and socket with configure flags and
  set the flags accordingly
- Added xmlto BuildRequires, it is needed now for man files

-------------------------------------------------------------------
Wed Apr 24 20:01:10 UTC 2013 - hrvoje.senjan@gmail.com

- Update to 1.6.10
  + Following Unicode Corrigendum #9, the noncharacters U+nFFFE, U+nFFFF,
    U+FDD0..U+FDEF are allowed in UTF-8 strings again. (fdo#63072)
  + Diagnose incorrect use of dbus_connection_get_data() with negative slot
    (i.e. before allocating the slot) rather than returning junk (fdo#63127)
  + In the activation helper, when compiled for tests, do not reset the system
    bus address, fixing the regression tests. (fdo#52202)
  + Fix building with Valgrind 3.8, at the cost of causing harmless warnings
    with Valgrind 3.6 on some compilers (fdo#55932)
  + Don't leak temporary fds pointing to /dev/null (fdo#56927,)
  + Create session.d, system.d directories under CMake (fdo#41319)
  + Include alloca.h for alloca() if available, fixing compilation on
    Solaris 10 (fdo#63071)

-------------------------------------------------------------------
Fri Feb 22 17:13:02 CET 2013 - hpj@suse.com

- Spec file changes moving files from /var/run to /run.
- Add dbus-move-everything-to-run-directory.patch by rmilasan. This
  moves everything (pid files, lock files, etc.) to /run.
- Add dbus-fall-back-to-old-run-directory.patch (bnc#802525).

-------------------------------------------------------------------
Mon Feb 18 13:06:24 UTC 2013 - rmilasan@suse.com

- Revert patch: dbus-move-everything-to-run-directory.patch (bnc#802525).

-------------------------------------------------------------------
Thu Jan 24 10:51:29 UTC 2013 - rmilasan@suse.com

- Move everything (pid files, lock files, etc.) to /run.
  add: dbus-move-everything-to-run-directory.patch

-------------------------------------------------------------------
Sun Nov 18 17:59:23 UTC 2012 - hrvoje.senjan@gmail.com

- Update to 1.6.8
  * Follow up to CVE-2012-3524: The additional hardening
    work to use __secure_getenv() as a followup to bug #52202
    broke certain configurations of gnome-keyring.  Given
    the difficulty of making this work without extensive
    changes to gnome-keyring, use of __secure_getenv() is
    deferred.
  * CVE-2012-3524: Don't access environment variables (fdo#52202)
    Thanks to work and input from Colin Walters, Simon McVittie,
    Geoffrey Thomas, and others.
  * Detect that users are "at the console" correctly when configured with
    a non-default path such as --enable-console-auth-dir=/run/console
    (fdo#51521, Dave Reisner)
  * Remove an incorrect assertion from DBusTransport (fdo#51657,
    Simon McVittie)
  * Change how we create /var/lib/dbus so it works under Automake >= 1.11.4
    (fdo#51406, Simon McVittie)
  * Don't return from dbus_pending_call_set_notify with a lock held on OOM
    (fdo#51032, Simon McVittie)
  * Disconnect "developer mode" (assertions, verbose mode etc.) from
    Automake maintainer mode. D-Bus developers should now configure with
    --enable-developer. Automake maintainer mode is now on by default;
    distributions can disable it with --disable-maintainer-mode.
    (fdo#34671, Simon McVittie)
  * Unix-specific:
    - Check for libpthread under CMake on Unix (fdo#47237, Simon McVittie)
  * New requirements
    - PTHREAD_MUTEX_RECURSIVE on Unix
    - compiler support for 64-bit integers (int64_t or equivalent)
  * D-Bus Specification v0.19
  * New dbus-daemon features
    - <allow own_prefix="com.example.Service"/> rules allow the service to
      own names like com.example.Service.Instance3
    - optional systemd integration when checking at_console policies
    - --nopidfile option, mainly for use by systemd
    - path_namespace and arg0namespace may appear in match rules
    - eavesdropping is disabled unless the match rule contains eavesdrop=true
  * New public API
    - functions to validate various string types (dbus_validate_path() etc.)
    - dbus_type_is_valid()
    - DBusBasicValue, a union of every basic type
  * Bug fixes
    - removed an unsafe reimplementation of recursive mutexes
    - dbus-daemon no longer busy-loops if it has far too many file descriptors
    - dbus-daemon.exe --print-address works on Windows
    - all the other bug fixes from 1.4.20
  * Other major implementation changes
    - on Linux, dbus-daemon uses epoll if supported, for better scalability
    - dbus_threads_init() ignores its argument and behaves like
      dbus_threads_init_default() instead
    - removed the per-connection link cache, improving dbus-daemon performance
  * Developer features
    - optional Valgrind instrumentation (--with-valgrind)
    - optional Stats interface on the dbus-daemon (--enable-stats)
    - optionally abort whenever malloc() fails (--enable-embedded-tests
      and export DBUS_MALLOC_CANNOT_FAIL=1)
  * Be more careful about monotonic time vs. real time, fixing DBUS_COOKIE_SHA1
    spec-compliance (fdo#48580, David Zeuthen)
  * Don't use install(1) within the source/build trees, fixing the build as
    non-root when using OpenBSD install(1) (fdo#48217, Antoine Jacoutot)
  * Add missing commas in some tcp and nonce-tcp addresses, and remove
    an unused duplicate copy of the nonce-tcp transport in Windows builds
    (fdo#45896, Simon McVittie)
- remove patch dbus-cve-2012-3524.patch as incorporated upstream

-------------------------------------------------------------------
Fri Nov 16 12:56:04 UTC 2012 - dimstar@opensuse.org

- Enable systemd integration (with_systemd 1): follow the rest of
  the distribution enabling systemd support. As agreed, systemd is
  the main supported way for 12.3.

-------------------------------------------------------------------
Fri Nov 16 11:57:13 UTC 2012 - fcrozat@suse.com

- Move default home from /var/run/dbus to /run/dbus
- Fix useradd invocation: -o is useless without -u and newer
  versions of pwdutils/shadowutils fail on this now.

-------------------------------------------------------------------
Thu Nov  8 15:38:22 UTC 2012 - tittiatcoke@gmail.com

- Link /usr/bin/dbus-send to /bin/dbus-send. Upower uses
  dbus-send to receive signals from systemd regarding resuming,
  however looks for the moment in the wrong directory.

-------------------------------------------------------------------
Sat Nov  3 16:33:15 UTC 2012 - crrodriguez@opensuse.org

- Fix factory breakage on systemd units directory

-------------------------------------------------------------------
Fri Oct 26 06:07:21 UTC 2012 - coolo@suse.com

- remove sysvinit requires from the package
- remove %run_permissions macro

-------------------------------------------------------------------
Wed Oct 24 21:11:19 UTC 2012 - jengelh@inai.de

- baselibs: dbus-1-devel-32bit must require libdbus-1-3-32bit

-------------------------------------------------------------------
Sun Oct  7 16:57:56 UTC 2012 - coolo@suse.com

- remove libzio build dependency

-------------------------------------------------------------------
Mon Aug 27 13:54:45 CEST 2012 - thoenig@suse.de

- dbus-cve-2012-3524.patch: Add patch for CVE-2012-3524 to fix getenv()
  vulnerability in setuid root binaries (bnc#697105)

-------------------------------------------------------------------
Wed Aug  1 10:00:06 UTC 2012 - idonmez@suse.com

- Add pkgconfig(x11) as BuildRequires instead of xorg-x11-devel so
  we don't depend on Mesa and create a build cycle.

-------------------------------------------------------------------
Tue May 15 07:18:57 UTC 2012 - vuntz@opensuse.org

- Move ownership of /etc/dbus-1/{session.d,system.d} and
  /usr/share/dbus-1/{interfaces,services,system-services} to
  libdbus-1-3 instead of dbus-1: many dbus users put files there,
  and it's annoying to force them to own those directories.

-------------------------------------------------------------------
Sun Apr 22 16:28:41 UTC 2012 - alinm.elena@gmail.com

- added libdbus-1-3 to build for -32bit...
- adeed post and postun sections for libdbus-1-3

-------------------------------------------------------------------
Thu Apr 19 20:44:39 CEST 2012 - thoenig@suse.de

- More news from the dependency hell: Let dbus-1-devel require
  dbus-1.

-------------------------------------------------------------------
Wed Apr 18 11:54:42 CEST 2012 - thoenig@suse.de

- Split dbus-1 into libdbus-1 and dbus-1.

-------------------------------------------------------------------
Wed Mar 28 09:19:14 CEST 2012 - thoenig@suse.de

- Update to version 1.5.12:
  - Add public API to validate various string types:
    dbus_validate_path(), dbus_validate_interface(),
    dbus_validate_member(), dbus_validate_error_name(),
    dbus_validate_bus_name(), dbus_validate_utf8()
    (fdo#39549, Simon McVittie)

- Turn DBusBasicValue into public API so bindings don't need to
    invent their own "union of everything" type (fdo#11191, Simon
    McVittie)

- Enumerate data files included in the build rather than using
    find(1) (fdo#33840, Simon McVittie)

- Add support for policy rules like
    <allow own_prefix="com.example.Service"/> in dbus-daemon
    (fdo#46273, Alban Crequy)

- Windows-specific:
    - make dbus-daemon.exe --print-address (and --print-pid) work
      again on Win32, but not on WinCE (fdo#46049, Simon
      McVittie)
    - fix duplicate case value when compiling against mingw-w64
      (fdo#47321, Andoni Morales Alastruey)

-------------------------------------------------------------------
Mon Feb 27 10:18:53 UTC 2012 - vuntz@opensuse.org

- Revert my last change completely, and go back to using -fpie in
  CFLAGS and -pie in LDFLAGS for the whole build: after discussion
  upstream in fdo#46570, it appears that this is the recommended
  way to harden the build.

-------------------------------------------------------------------
Fri Feb 24 12:50:17 UTC 2012 - vuntz@opensuse.org

- Change the way we pass -fpie/-pie:
  + Stop changing CFLAGS/LDFLAGS in %build to add -fpie/-pie.
  + Add dbus-1-suid_flags.patch: respect SUID_CFLAGS/SUID_LDFLAGS
    when building the suid binary (dbus-daemon-launch-helper).
  + Set SUID_CFLAGS to -fPIE and SUID_LDFLAGS to -pie in %build.

-------------------------------------------------------------------
Fri Feb 24 12:40:26 UTC 2012 - coolo@suse.com

- move with_systemd definition into COMMON part to fix dbus-1-x11

-------------------------------------------------------------------
Wed Feb 22 08:21:30 UTC 2012 - vuntz@opensuse.org

- Update to version 1.5.10:
  + D-Bus Specification 0.19:
    - Formally define unique connection names and well-known bus
      names, and document best practices for interface, bus, member
      and error names, and object paths (fdo#37095)
    - Document the search path for session and system services on
      Unix, and where they should be installed by build systems
      (fdo#21620, fdo#35306)
    - Document the systemd transport (fdo#35232)
  + Make dbus_threads_init() use the same built-in threading
    implementation as dbus_threads_init_default(); the
    user-specified primitives that it takes as a parameter are now
    ignored (fdo#43744)
  + Allow all configured auth mechanisms, not just one (fdo#45106)
  + Improve cmake build system.
  + Build tests successfully with older GLib, as found in e.g.
    Debian 6 (fdo#41219)
  + Avoid use of deprecated GThread API (fdo#44413)
  + Build documentation correctly if man2html doesn't support
    filenames on its command-line (fdo#43875)
  + Improve test coverage. To get even more coverage, run the tests
    with DBUS_TEST_SLOW=1 (fdo#38285, fdo#42811)
  + Reduce the size of the shared library by moving functionality
    only used by dbus-daemon, tests etc. into their internal
    library and deleting unused code (fdo#34976, fdo#39759)
  + Add dbus-daemon --nopidfile option, overriding the
    configuration, for setups where the default configuration must
    include <pidfile/> to avoid breaking traditional init, but the
    pid file is in fact unnecessary; use it under systemd to
    improve startup time a bit (fdo#45520)
  + Optionally (if configured --with-valgrind) add instrumentation
    to debug libdbus and associated tools more meaningfully under
    Valgrind (fdo#37286)
  + Improve the dbus-send(1) man page (fdo#14005)
  + Make dbus-protocol.h compatible with C++11 (fdo#46147)
  + If tests are enabled and DBUS_MALLOC_CANNOT_FAIL is set in the
    environment, abort on failure to malloc() (like GLib does), to
    turn runaway memory leaks into a debuggable core-dump if a
    resource limit is applied (fdo#41048)
  + Don't crash if realloc() returns NULL in a debug build (fdo#41048)
  + Unix-specific:
    - Replace our broken reimplementation of recursive mutexes,
      which has been broken since 2006, with an ordinary pthreads
      recursive mutex (fdo#43744)
    - Use epoll(7) for a more efficient main loop in Linux;
      equivalent patches welcomed for other OSs' equivalents like
      kqueue, /dev/poll, or Solaris event ports (fdo#33337)
    - When running under systemd, use it instead of ConsoleKit to
      check whether to apply at_console policies (fdo#39609)
    - Avoid a highly unlikely fd leak (fdo#29881)
    - Don't close invalid fd -1 if getaddrinfo fails (fdo#37258)
    - Don't touch ~/.dbus and ~/.dbus-keyrings when running 'make
      installcheck' (fdo#41218)
    - Stop pretending we respect XDG_DATA_DIRS for system services:
      the launch helper doesn't obey environment variables to avoid
      privilege escalation attacks, so make the system bus follow
      the same rules (fdo#21620)
  + Windows-specific fixes.
- Get ready for a switch to systemd:
  + Add a with_systemd macro, currently set to 0 as the systemd
    support would introduce a build cycle between dbus-1 and
    systemd.
  + Add pkgconfig(libsystemd-daemon) and
    pkgconfig(libsystemd-login) BuildRequires and pass
    --enable-systemd to configure if we build systemd support.

-------------------------------------------------------------------
Mon Feb  6 10:12:53 UTC 2012 - dlovasko@suse.com

- fixed bnc#743149 - added position independent flags to compilation and linking(-fpie/-pie)

-------------------------------------------------------------------
Wed Oct 12 09:47:55 UTC 2011 - coolo@suse.com

- add patch to enable X11 autolaunch even if configure thinks
  it can't be done (bnc#707817)

-------------------------------------------------------------------
Wed Oct 12 00:32:50 CEST 2011 - dmueller@suse.de

- update to version 1.5.8:
 * Clean up dead code, and make more warnings fatal in development builds
  (fdo#39231, fdo#41012; Simon McVittie)
 * Add a regression test for fdo#38005 (fdo#39836, Simon McVittie)
 * Add _DBUS_STATIC_ASSERT and use it to check invariants
 * Fix a small memory leak, and a failure to report errors, when updating
   a service file entry for activation (fdo#39230, Simon McVittie)
 * Clean up (non-abstract) Unix sockets on bus daemon exit
 * On systems that use libcap-ng but not systemd, drop supplemental groups
   when switching to the daemon user (Red Hat #726953, Steve Grubb)

-------------------------------------------------------------------
Fri Sep 30 20:07:53 UTC 2011 - coolo@suse.com

- add libtool as buildrequire to make the spec file more reliable

-------------------------------------------------------------------
Sun Sep 18 17:17:12 UTC 2011 - jengelh@medozas.de

- Remove redundant tags/sections from specfile
  (cf. packaging guidelines)

-------------------------------------------------------------------
Mon Aug  1 14:37:16 CEST 2011 - vuntz@opensuse.org

- Update to version 1.5.6:
  + Potentially incompatible (Bustle and similar debugging tools
    will need changes to work as intended):
    - Do not allow match rules to "eavesdrop" (receive messages
      intended for a different recipient) by mistake: eavesdroppers
      must now opt-in to this behaviour by putting
      "eavesdrop='true'" in the match rule, which will not have any
      practical effect on buses where eavesdropping is not allowed
      (fdo#37890)
  + Other changes:
    - D-Bus Specification version 0.18 (fdo#37890, fdo#39450,
      fdo#38252):
      . add the "eavesdrop" keyword to match rules
      . define eavesdropping, unicast messages and broadcast messages
      . stop claiming that match rules are needed to match unicast
        messages to you
      . promote the type system to be a top-level section
    - Use DBUS_ERROR_OBJECT_PATH_IN_USE if
      dbus_connection_try_register_object_path or
      dbus_connection_try_register_fallback fails, not
      ...ADDRESS_IN_USE, and simplify object-path registration
      (fdo#38874)
    - Consistently use atomic operations on everything that is ever
      manipulated via atomic ops, as was done for changes to
      DBusConnection's refcount in 1.4.12 (fdo#38005)
    - Fix a file descriptor leak when connecting to a TCP socket
      (fdo#37258)
    - Make "make check" in a clean tree work, by not running tests
      until test data has been set up (fdo#34405)
    - The dbus-daemon no longer busy-loops if it has a very large
      number of file descriptors (fdo#23194)
    - Refactor message flow through dispatching to avoid locking
      violations if the bus daemon's message limit is hit; remove
      the per-connection link cache, which was meant to improve
      performance, but now reduces it (fdo#34393)
    - Some cmake fixes
    - Remove dead code, mainly from DBusString (fdo#38570,
      fdo#39610)
    - Stop storing two extra byte order indicators in each D-Bus
      message (fdo#38287)
    - Add an optional Stats interface which can be used to get
      statistics from a running dbus-daemon if enabled at configure
      time with --enable-stats (fdo#34040)
    - Fix various typos (fdo#27227, fdo#38284)
    - Documentation (fdo#36156):
       . let xsltproc be overridden as usual: ./configure
         XSLTPROC=myxsltproc
       . install more documentation automatically, including
         man2html output
       . put dbus.devhelp in the right place (it must go in
         ${htmldir})
    - Unix-specific:
       . look for system services in /lib/dbus-1/system-services in
         addition to all the other well-known locations; note that
         this should always be /lib, even on platforms where shared
         libraries on the root FS would go in /lib64,
         /lib/x86_64-linux-gnu or similar (fdo#35229)
       . opt-in to fd passing on Solaris (fdo#33465)
    - Windows-specific:
       . fix use of a mutex for autolaunch server detection
       . don't crash on malloc failure in
         _dbus_printf_string_upper_bound
- Manually create /lib/dbus-1/system-services in %install so that
  we can own it.

-------------------------------------------------------------------
Fri Jul  1 10:07:55 CEST 2011 - vuntz@opensuse.org

- Update to version 1.5.4:
  + Security (local denial of service):
    - Byte-swap foreign-endian messages correctly, preventing a
      long-standing local DoS if foreign-endian messages are
      relayed through the dbus-daemon (fdo#38120, deb#629938, no
      CVE number yet)
  + New things:
    - The constant to use for an infinite timeout now has a name,
      DBUS_TIMEOUT_INFINITE.
    - If GLib and DBus-GLib are already installed, more tests will be built,
      providing better coverage.(fdo#34570)
  + Changes:
    - Consistently use atomic operations for the DBusConnection's
      refcount, fixing potential threading problems (fdo#38005)
    - Don't use -Wl,--gc-sections by default: in practice the size
      decrease is small (300KiB on x86-64) and it frequently
      doesn't work in unusual toolchains. (fdo#33466)
    - Use #!/bin/sh for run-with-tmp-session-bus.sh, making it work
      on *BSD (fdo#35880)
    - Use ln -fs to set up dbus for systemd, which should fix
      reinstallation when not using a DESTDIR (fdo#37870)
    - Windows-specific changes:
      . don't try to build dbus-daemon-launch-helper (fdo#37838)
- Changes from  version 1.5.2:
  + Notes for distributors:
    - This version of D-Bus no longer uses -fPIE by default.
  + Changes:
    + D-Bus Specification v0.17
      . Reserve the extra characters used in signatures by GVariant
        (fdo#34529)
      . Define the ObjectManager interface (fdo#34869)
    + Don't force -fPIE: distributions and libtool know better than
      we do whether it's desirable (fdo#16621, fdo#27215)
    + Allow --disable-gc-sections, in case your toolchain offers
      the -ffunction-sections, -fdata-sections and
      -Wl,--gc-sections options but they're broken, as seen on
      Solaris (fdo#33466)
    + Install dbus-daemon and dbus-daemon-launch-helper in a more
      normal way (fdo#14512)
    + Ensure that maintainers upload documentation with the right
      permissions (fdo#36130)
    + Don't force users of libdbus to be linked against
      -lpthread, -lrt (fdo#32827)
    + Log system-bus activation information to syslog (fdo#35705)
    + Log messages dropped due to quotas to syslog (fdo#35358)
    + Make the nonce-tcp transport work on Unix (fdo#34569)
    + On Unix, if /var/lib/dbus/machine-id cannot be read, try
      /etc/machine-id (fdo#35228)
    + In the regression tests, don't report fds as "leaked" if they
      were open on startup (fdo#35173)
    + Make dbus-monitor bail out if asked to monitor more than one
      bus, rather than silently using the last one (fdo#26548)
    + Clarify documentation (fdo#35182)
    + Clean up minor dead code and some incorrect error handling
      (fdo#33128, fdo#29881)
    + Check that compiler options are supported before using them
      (fdo#19681)
    + Windows:
      . Remove obsolete workaround for winioctl.h (fdo#35083)

-------------------------------------------------------------------
Tue Jun 28 08:03:00 UTC 2011 - aj@suse.de

- Fix filelist to own a directory.
- Do not package html files twice.

-------------------------------------------------------------------
Wed May 18 14:04:24 UTC 2011 - coolo@novell.com

- buildrequire update-desktop-files for mimetypes.prov

-------------------------------------------------------------------
Thu May  5 11:45:49 UTC 2011 - coolo@opensuse.org

- switch to download_files service

-------------------------------------------------------------------
Wed Apr 20 10:07:16 UTC 2011 - coolo@opensuse.org

- changes license to GPL2+ or AFL 2.1

-------------------------------------------------------------------
Fri Apr 15 14:35:44 CEST 2011 - thoenig@suse.de

- Update to 1.5.0
  * D-Bus Specification v0.16
    - Add support for path_namespace and arg0namespace in match rules
      (fdo#24317, #34870; Will Thompson, David Zeuthen, Simon McVittie)
    - Make argNpath support object paths, not just object-path-like strings,
      and document it better (fdo#31818, Will Thompson)
  * Let the bus daemon implement more than one interface (fdo#33757,
    Simon McVittie)
  * Optimize _dbus_string_replace_len to reduce waste (fdo#21261,
    Roberto Guido)
  * Require user intervention to compile with missing 64-bit support
    (fdo#35114, Simon McVittie)
  * Add dbus_type_is_valid as public API (fdo#20496, Simon McVittie)
  * Raise UnknownObject instead of UnknownMethod for calls to methods on
    paths that are not part of the object tree, and UnknownInterface for calls
    to unknown interfaces in the bus daemon (fdo#34527, Lennart Poettering)

-------------------------------------------------------------------
Fri Apr  8 16:41:57 CEST 2011 - thoenig@suse.de

- Update to 1.4.8
  * Rename configure.in to configure.ac, and update it to modern conventions
    (fdo#32245; Javier Jardón, Simon McVittie)
  * Correctly give XDG_DATA_HOME priority over XDG_DATA_DIRS (fdo#34496,
    Anders Kaseorg)
  * Prevent X11 autolaunching if $DISPLAY is unset or empty, and add
    --disable-x11-autolaunch configure option to prevent it altogether
    in embedded environments (fdo#19997, NB#219964; Simon McVittie)
  * Install the documentation, and an index for Devhelp (fdo#13495,
    Debian #454142; Simon McVittie, Matthias Clasen)
  * If checks are not disabled, check validity of string-like types and
    booleans when sending them (fdo#16338, NB#223152; Simon McVittie)
  * Add UnknownObject, UnknownInterface, UnknownProperty and PropertyReadOnly
    errors to dbus-shared.h (fdo#34527, Lennart Poettering)
  * Break up a huge conditional in config-parser so gcov can produce coverage
    data (fdo#10887, Simon McVittie)
  * List which parts of the Desktop Entry specification are applicable to
    .service files (fdo#19159, Sven Herzberg)
  * Don't suppress service activation if two services have the same Exec=
    (fdo#35750, Colin Walters)
  * Windows:
    - Avoid the name ELEMENT_TYPE due to namespace-pollution from winioctl.h
      (Andre Heinecke)
    - Include _dbus_path_is_absolute in libdbus on Windows, fixing compilation
      (fdo#32805, Mark Brand)

-------------------------------------------------------------------
Wed Mar  9 13:23:09 UTC 2011 - coolo@novell.com

- Update to 1.4.6
  * Remove unfinished changes intended to support GTest-based tests,
    which were mistakenly included in 1.4.4

- Update to 1.4.4
  * Switch back to using even micro versions for stable releases; 1.4.1
    should have been called 1.4.2, so skip that version number
  * Don't leave bad file descriptors being watched when spawning processes,
    which could result in a busy-loop (fdo#32992, NB#200248; possibly
    also LP#656134, LP#680444, LP#713157)
  * Check for MSG_NOSIGNAL correctly
  * Fix failure to detect abstract socket support (fdo#29895)
  * Make _dbus_system_logv actually exit with DBUS_SYSTEM_LOG_FATAL
    (fdo#32262, NB#180486)
  * Improve some error code paths (fdo#29981, fdo#32264, fdo#32262,
    fdo#33128, fdo#33277, fdo#33126, NB#180486)
  * Avoid possible symlink attacks in /tmp during compilation (fdo#32854)
  * Tidy up dead code (fdo#25306, fdo#33128, fdo#34292, NB#180486)
  * Improve gcc malloc annotations (fdo#32710)
  * If the system bus is launched via systemd, protect it from the OOM killer
  * Documentation improvements (fdo#11190)
  * Avoid readdir_r, which is difficult to use correctly (fdo#8284,
    fdo#15922, LP#241619)
  * Cope with invalid files in session.d, system.d (fdo#19186,
    Debian #230231)
  * Don't distribute generated files that embed our builddir (fdo#30285,
    fdo#34292)
  * Raise the system bus's fd limit to be sufficient for its configuration
    (fdo#33474, LP#381063)
  * Fix syslog string processing
  * Ignore -Waddress
  * Remove broken gcov parsing code and --enable-gcov, and replace them
    with lcov HTML reports and --enable-compiler-coverage (fdo#10887)
  * Windows:
    - avoid live-lock in Windows CE due to unfair condition variables
  * OpenBSD:
    - support credentials-passing (fdo#32542)
  * Solaris:
    - opt-in to thread safety (fdo#33464)

-------------------------------------------------------------------
Sun Jan  2 12:54:14 UTC 2011 - javier@opensuse.org

- Update to 1.4.1
  + Fix for CVE-2010-4352: sending messages with excessively-nested
    variants can crash the bus. The existing restriction to 64-levels
    of nesting previously only applied to the static type signature;
    now it also applies to dynamic nesting using variants. Thanks to
    Rémi Denis-Courmont for discoving this issue.
  + Various bug fixes.
  + For details, see
    http://lists.freedesktop.org/archives/dbus/2010-December/013861.html

-------------------------------------------------------------------
Mon Nov  8 14:52:11 UTC 2010 - aj@suse.de

- Fix package list, own /lib/systemd directories.

-------------------------------------------------------------------
Tue Oct 12 14:35:53 UTC 2010 - cristian.rodriguez@opensuse.org

- ConsoleKit may not be installed on the system, so kill
 the process at "stop" only if it is running

-------------------------------------------------------------------
Fri Sep 24 18:21:46 UTC 2010 - cristian.rodriguez@opensuse.org

- add missimg BuildRequires on libcap-ng-devel so dbus can
  drop capabilities when needed.

-------------------------------------------------------------------
Mon Sep 6 18:41:50 CEST 2010 - kay.sievers@novell.com

- version 1.4.0
  - make dbus-uuidgen atomic
  - fix socket descriptor leak in _dbus_connect_tcp_socket_with_nonce
  - unconditionally enable D-Bus on systemd boots

-------------------------------------------------------------------
Sat Jul 24 10:15:42 CEST 2010 - kay.sievers@novell.com

- update systemd service installation

-------------------------------------------------------------------
Wed Jul 14 00:58:42 CEST 2010 - kay.sievers@novell.com

- drop systemd-units

-------------------------------------------------------------------
Sun Jul 11 00:39:51 CEST 2010 - kay.sievers@novell.com

- update to 1.3.2 snapshot
  - New standardized PropertiesChanged signal in the properties interface
  - Support forking bus services, for compatibility
- install systemd service files

-------------------------------------------------------------------
Mon Jun 28 06:38:35 UTC 2010 - jengelh@medozas.de

- use %_smp_mflags

-------------------------------------------------------------------
Thu Mar 25 15:44:39 CET 2010 - vuntz@opensuse.org

- Update to version 1.2.24:
  + For details, see
    http://lists.freedesktop.org/archives/dbus/2010-March/012436.html
  + Highlights:
    - Fix a critical crasher bug in the syslog code
  + [bus] While creating a syslog, correctly get pointer data from
    DBusString
  + [bus] Don't install a SIGTERM handler
  + [64 bit printf] Update to use DBUS_PID_FORMAT, print (omitted)
  + Move dispatching to destination to bus_dispatch_matches()
  + Dispatch post-activation messages to anyone interested
  + Build changes.
- Changes from version 1.2.22:
  + For details, see
    http://lists.freedesktop.org/archives/dbus/2010-March/012395.html
  + Highlights:
    - Fix to avoid UI freezes in newer Evolution versions (and any
      other program that makes synchronous DBus calls from a
      non-main thread).
    - Monitor service directories for changes
  + When handling a watch, return if another thread is doing I/O
  + Monitor service directories for changes
  + Sync up UNICODE_VALID with glib, add documentation
  + Support inotify on older kernels
  + Handle OOM in reload watch
  + Refactor _dbus_log_info, _dbus_log_security into
    _dbus_log_system
  + Add DBUS_SYSTEM_LOG_FATAL severity
  + Add _dbus_credentials_to_string_append
  + Add a prefix to our syslog messages
  + Make SELinux initialization failure fatal
  + Don't send an reply for driver messages if one isn't requested
  + Fix double-free in error case.
  + Other simple fixes, build fixes.
  + Explicitly specify in the spec lower-case hex must be used
  + Use AM_SILENT_RULES if available
- Changes from version 1.2.20:
  + For details, see
    http://lists.freedesktop.org/archives/dbus/2010-February/012156.html
  + Fix inotify shutdown
  + Fix compilation in --disable-selinux case
- Changes from version 1.2.18:
  + For details, see
    http://lists.freedesktop.org/archives/dbus/2010-February/012150.html
  + Ignore exit code zero from activated services
  + Switch to libcap-ng, avoid linking libdbus against libcap[-ng]
  + Don't drop pending activations when reloading configuration
  + Update messagebus.in init script to start earlier
  + Clean up inotify watch handling
  + Don't crash when reloading if we haven't loaded user database
    yet
  + fdo#23502 - corrected wrong verbose-output
  + Correct timeout handling
  + dbus-monitor: use unbuffered stdout instead of handling SIGINT
  + fdo#25697 - Fix memory leak in policy reload
  + fdo#23977 - dbus-launch --exit-with-session not killing
    dbus-daemon on SIGINT
  + Use monotonic clock for _dbus_get_current_time() if it's
    available.
  + Make array-printing code easier to follow
  + Forbid zero serial numbers
  + Include reason when reporting corrupt messages
  + Add an accessor for the loader's corruption reason
  + Print byte arrays as nicely-formatted hex.
  + Print all-printable-ASCII byte arrays as strings
  + Build fixes, including fdo#19432, fdo#22788, fdo#22805

-------------------------------------------------------------------
Mon Dec 14 20:43:34 CET 2009 - jengelh@medozas.de

- add baselibs.conf as a source
- package documentation as noarch

-------------------------------------------------------------------
Wed Sep  2 16:46:50 CEST 2009 - mvidner@suse.cz

- Implemented /etc/init.d/dbus reload (bnc#503074).

-------------------------------------------------------------------
Thu Jul 23 15:50:57 CEST 2009 - kay.sievers@novell.com

- fix %changelog

-------------------------------------------------------------------
Fri Jul 17 17:50:00 CEST 2009 - meissner@suse.de

- added dbus-1-devel to baselibs.conf

-------------------------------------------------------------------
Fri Jul 17 17:18:57 CEST 2009 - kay.sievers@novell.com

- fix --libexecdir to be the proper /lib/dbus-1/ directory

-------------------------------------------------------------------
Wed Jul 15 12:41:36 CEST 2009 - kay.sievers@novell.com

- update to 1.2.16 release
  - Avoid race conditions reading message from exited process
  - Ensure initialized variable in dbus_connection_remove_filter
  - Don't fail autolaunching if process has SIGCHLD handler
  - Ensure inotify fd is set close on exec
  - Make sure a pending call timeout isn't assumed
  - Allow a pending call to block forever
  - Don't allocate DBusTimeout for pending call when passed INT_MAX
  - Update documentation now that INT_MAX means no timeout
  - Fix issue where timeouts can overflow
  - Remove 6 hour timeout restriction
  - Unrestrict session bus timeout

-------------------------------------------------------------------
Thu Apr 16 20:04:49 CEST 2009 - crrodriguez@suse.de

- use --disable-static instead of removing static libraries

-------------------------------------------------------------------
Thu Apr  2 15:51:04 CEST 2009 - werner@suse.de

- Make boot script smart

-------------------------------------------------------------------
Tue Feb 17 12:28:24 CET 2009 - thoenig@suse.de

- update to D-Bus 1.2.12:
  - fdo#17969: Don't test for abstract sockets if explicitly
    disabled
  - fdo#18064: more efficient validation for fixed-size type
    arrays
  - Initialize AVC earlier so we can look up service security
    contexts
  - Print serial in dbus-monitor
  - fdo#15412: Add --address option to dbus-send
  - fdo#18446: Keep umask for session bus
  - Fix cross-compiling with autotools.
  - Some code cleanup and warning fixes; --maintainer-mode now
    uses -Werror by default
- add patch dbus-log-deny.patch: log denies to syslog
- drop patch dbus-1.2.10-compile-fix.patch

-------------------------------------------------------------------
Mon Jan 26 14:35:05 CET 2009 - lnussel@suse.de

- remove dbus-1.2.10-permissive.patch
- move /lib/libdbus-1.so to /usr

-------------------------------------------------------------------
Tue Jan 20 14:55:04 CET 2009 - thoenig@suse.de

- update to 1.2.10: prepares fix for CVE-2008-4311 (bnc#443307)
  - fix send_requested_reply="true" allows all non-reply messages
  - add syslog of denials and config file reloads
  - system policy cleanup
- add patch dbus-1.2.10-compile-fix.patch: 1.2.10 compile fix
- add patch dbus-1.2.10-permissive.patch: behave like permissive
  branch, needs to be dropped as soon as all applications ship
  with correct configuration files for the system bus
- drop patch dbus-do-not-abort-on-check-thoenig-01.patch

-------------------------------------------------------------------
Wed Dec 10 14:06:55 CET 2008 - dmueller@suse.de

- list the machine id as ghost file
- fix filelist

-------------------------------------------------------------------
Wed Dec 10 12:34:56 CET 2008 - olh@suse.de

- use Obsoletes: -XXbit only for ppc64 to help solver during distupgrade
  (bnc#437293)

-------------------------------------------------------------------
Mon Nov  3 13:33:19 CET 2008 - thoenig@suse.de

- Remove dbus-allow-root-access-to-session-bus.patch (bnc#428963).

-------------------------------------------------------------------
Thu Oct 30 12:34:56 CET 2008 - olh@suse.de

- obsolete old -XXbit packages (bnc#437293)

-------------------------------------------------------------------
Thu Oct  9 20:44:10 CDT 2008 - hpj@novell.com

- Add dbus-allow-root-access-to-session-bus.patch (bnc#428963).

-------------------------------------------------------------------
Tue Oct  7 09:48:51 CEST 2008 - thoenig@suse.de

- Update to D-Bus 1.2.4
- fix for CVE-2008-3834 (bnc#432901)
- compilation and portability fixes

-------------------------------------------------------------------
Wed Sep  3 12:09:25 CEST 2008 - lnussel@suse.de

- hook into ConsoleKit for at_console support
- only require selinux for > 11.0

-------------------------------------------------------------------
Mon Aug 25 11:57:37 CEST 2008 - prusnak@suse.cz

- enabled SELinux support [Fate#303662]

-------------------------------------------------------------------
Fri Aug 22 15:56:59 CEST 2008 - aj@suse.de

- Fix init script.

-------------------------------------------------------------------
Thu Aug  7 14:26:26 CEST 2008 - thoenig@suse.de

- Update to D-Bus 1.2.3
- Changes:
  * new UpdateActivationEnvironment bus API (fdo#16669)
  * Solaris Auditing (ADT) support (fdo#15740)
  * Various notable bug fixes (fdo#16727, fdo#16294, fdo#15947
    fdo#15588
- Remove patches which went upstream (dbus-userdb-typo.patch,
  dbus-fix-timer-leak-dmueller-01.patch)

-------------------------------------------------------------------
Mon Jun  2 18:22:15 CEST 2008 - thoenig@suse.de

- add patch dbus-userdb-typo.patch (bnc#394383)

-------------------------------------------------------------------
Wed May  7 14:42:07 CEST 2008 - thoenig@suse.de

- add patch dbus-fix-timer-leak-dmueller-01.patch (bnc#381621)

-------------------------------------------------------------------
Thu Apr 24 15:45:58 CEST 2008 - thoenig@suse.de

- %post: don't use invalid macro
- %post: don't call %run_ldconfig (deprecated)

-------------------------------------------------------------------
Mon Apr 14 15:25:29 CEST 2008 - thoenig@suse.de

- run dbus-uuidgen in %post

-------------------------------------------------------------------
Thu Apr 10 12:54:45 CEST 2008 - ro@suse.de

- added baselibs.conf file to build xxbit packages
  for multilib support

-------------------------------------------------------------------
Tue Apr  8 13:39:59 CEST 2008 - thoenig@suse.de

- Update to D-Bus 1.2.1
- Changes:
  * compiles under some older versions of glibc
  * compiles without X support once again
  * fix stuck server grab if dbus-launch is run in an existing
    D-Bus X session
  * various Mac OSX build fixes added
  * don't use the broken poll call on Mac OSX
  * better checks for linker flag support should allow D-Bus to
    link under various linkers
  * exit_on_disconnect is set after the connection registers with
    a bus so we don't exit if we get a disconnect during the
    handshake
  * dicts now work correctly with dbus-send
  * inotify backend is now less aggressive
  * pending calls expire correctly
  * memleak of uuid when the bus is autolaunched fixed

-------------------------------------------------------------------
Wed Feb 27 19:53:34 CET 2008 - thoenig@suse.de

- Update to D-Bus 1.1.20
- Changes:
  * system bus activation
  * TCP address format enhancements
  * ANONYMOUS mechanism for authentication
  * autolaunched busses now save their parameters in X11 if
    possible
  * inotify is now the default backend for watching configuration
    file changes
  * better thread support
  * bus daemon now generates a globally-unique ID for itself
  * support for message serialization added
  * better eavesdropping support now picks up reply messages for
    debugging
  * Fixed CVE-2008-0595
  * Fixes dbus-launch so the session bus goes away so does D-Bus
  * Builds against latest gcc/glibc changes
  * Correctly unref connections without guids during shutdown
  * API additions:
    o dbus_connection_set_allow_anonymous() - allow the message
      stream to begin if the client auths as anonymous
    o dbus_watch_get_unix_fd() - replaces dbus_watch_get_fd
    o dbus_watch_get_socket() - replaces dbus_watch_get_fd
    o dbus_server_get_id() - available to access the unique ID of
      a particular address
    o dbus_connection_get_server_id() - available to access the
      unique ID of a particular address
    o dbus_message_marshal() - serializes a message into a byte
      array
    o dbus_message_demarshal() - de-serializes a byte array into
      a message
  * API deprecation:
    o dbus_watch_get_fd() - had unclear cross-platform semantics
  * Protocol additions:
    o Argument path matching of the type arg0path=’/aa/bb/’ is now
      supported
    o New error org.freedesktop.DBus.Error.ObjectPathInUse added
    o ANONYMOUS auth support added
    o GetAll call added to the properties interface for getting a
      list of properties an object exports
- Add patch dbus-1.1.20-fix-build.patch

-------------------------------------------------------------------
Fri Jan 18 10:31:27 CET 2008 - thoenig@suse.de

- Update to D-Bus 1.1.4 (1.2.0 RC2)
- Drop patch dbus-inotify-fix-thoenig-01.patch: Merged upstream

-------------------------------------------------------------------
Thu Jan 17 18:17:35 CET 2008 - thoenig@suse.de

- Add patch dbus-inotify-fix-thoenig-01.patch: Fix inotify support

-------------------------------------------------------------------
Wed Jan 16 11:13:12 CET 2008 - thoenig@suse.de

- Update to D-Bus 1.1.3
- DTD for the introspection format is fixed and uploaded to the
  servers
- Argument path matching of the type arg0path='/aa/bb/' is now
  supported (see the specification for more information)
- New error org.freedesktop.DBus.Error.ObjectPathInUse added
  Autolaunched busses now save their parameters in X11 if possible
  making them behave closer to busses launched through the normal
  mechanisms
- inotify is now the default backend for watching configuration
  file changes
- More support for the AIX platform has been added
- Numerous bug fixes and performance enhancements

-------------------------------------------------------------------
Thu Dec 13 17:56:11 CET 2007 - thoenig@suse.de

- Fix permissions for activation helper
- Use bzip2 for tar ball

-------------------------------------------------------------------
Mon Nov 19 16:20:06 CET 2007 - thoenig@suse.de

- Update to snapshot of D-Bus 1.1.3 (git20071112)
- Own /usr/share/dbus-1/system-services
- Don't restart on update
- Remove dbus-audit-user.patch (upstream)

-------------------------------------------------------------------
Fri Oct 19 18:46:53 CEST 2007 - jpr@suse.de

- Correct error in fix for b.n.c 332845, extraneous  $DBUS_DAEMON_PID

-------------------------------------------------------------------
Fri Oct 19 16:39:51 CEST 2007 - meissner@suse.de

- adjust permissions handling

-------------------------------------------------------------------
Fri Oct 12 12:35:00 CEST 2007 - thoenig@suse.de

- Don't use startproc (b.n.c 332845)
- Merge D-Bus package from build service

-------------------------------------------------------------------
Tue Oct  2 08:00:00 CEST 2007 - tambet@novell.com

- Update to 1.1.2 for system service activation.
- Add patches from RedHat:
  dbus-lsb.patch
  dbus-audit-user.patch
  dbus-no-abort.patch

-------------------------------------------------------------------
Tue Sep 25 12:13:35 CEST 2007 - dmueller@suse.de

- install a interfaces directory

-------------------------------------------------------------------
Fri Aug 10 17:52:29 CEST 2007 - dmueller@suse.de

- package size reduction (31%)
- documentation shouldn't be executable

-------------------------------------------------------------------
Mon Jul 30 12:52:46 CEST 2007 - thoenig@suse.de

- Fix path in rc script for both, dbus-daemon and dbus-uuidgen

-------------------------------------------------------------------
Sun Jul 29 17:16:32 CEST 2007 - ro@suse.de

- next attempt to fix path for dbus-launch

-------------------------------------------------------------------
Sat Jul 28 16:12:44 CEST 2007 - thoenig@suse.de

- Fix location of dbus-1-launch for dbus-1-x11
- Fix dbus-1-devel to own %{_libdir}/dbus-1.0

-------------------------------------------------------------------
Wed Jul 25 17:07:58 CEST 2007 - thoenig@suse.de

- move D-Bus to / (b.n.c #285472)
- remove static libraries

-------------------------------------------------------------------
Fri Jul 20 13:55:56 CEST 2007 - dmueller@suse.de

- build against libexpat (#285472)

-------------------------------------------------------------------
Tue Jun 19 13:47:24 CEST 2007 - thoenig@suse.de

- Add $local_fs to Required-Start (b.n.c #285472)

-------------------------------------------------------------------
Fri Mar 16 18:08:35 CET 2007 - dmueller@suse.de

- display error messages from dbus-launch

-------------------------------------------------------------------
Sun Feb 25 14:51:42 CET 2007 - thoenig@suse.de

- remove leading whitespace from .changes

-------------------------------------------------------------------
Thu Feb 22 12:21:50 CET 2007 - thoenig@suse.de

- Disable dbus-do-not-abort-on-check-thoenig-01.patch until we hit
  RC phase.

-------------------------------------------------------------------
Mon Feb 19 11:57:48 CET 2007 - dmueller@suse.de

- fix mis-placed comment marker

-------------------------------------------------------------------
Tue Feb 13 19:16:24 CET 2007 - dmueller@suse.de

- build wih x support for dbus-1-x11 package (#225627)

-------------------------------------------------------------------
Wed Dec 13 12:47:48 CET 2006 - thoenig@suse.de

- move invocation of autoreconf from %prep to %build
- update to D-Bus 1.0.2 (skipped 1.0.1)
  - fix security bug CVE-2006-6107 match rules can be removed by
    apps that did not create them
  - pthread fix
  - fix bug where calling dbus_threads_init_default would assert
  - fix UUID output to match the spec
  - clear up documentation on UUIDs

-------------------------------------------------------------------
Sun Nov 12 21:39:07 CET 2006 - thoenig@suse.de

- add patch dbus-do-not-abort-on-check-thoenig-01.patch: Do not
  call _dbus_warn_check_failed() but _dbus_warn() on checks as
  _dbus_warn_check_failed() always leads to abort(3)

-------------------------------------------------------------------
Sat Nov 11 20:04:46 CET 2006 - thoenig@suse.de

- update to D-Bus 1.0.0
  - documents updated with API/ABI guarantees
  - added missing patch FreeBSD need to run out of the box
  - dbus-monitor now has a profile mode
  - AUTHORS file updated with names from the ChangeLog. Thanks to
    everyone who helped get us here

-------------------------------------------------------------------
Thu Nov  9 13:17:28 CET 2006 - thoenig@suse.de

- start service for D-Bus system bus also in run level 2 (b.n.c
  #216805)

-------------------------------------------------------------------
Fri Nov  3 23:53:55 CET 2006 - thoenig@suse.de

- remove patch
  dbus-send-do-not-close-shared-connection-thoenig-01.patch (fix
  is now upstream)
- run cleanup-man-pages.sh to clean up Doxygen man page output
- cleanup rc script, add invocation of dbus-uuidgen
- do not call dbus-uuidgen in %post
- update to D-Bus 0.95
  - DBUS_API_SUBJECT_TO_CHANGE no longer needs to be defined when
    building apps
  - ./configure checks now work when cross compiling
  - dbus-uuidgen --ensure is now run in the init script so there
    is no need to run it in a post script
  - dbus-uuidgen now writes out to /var/lib/dbus to work with
    systems that do not have a writable /etc. Packages should
    install and own the /var/lib/dbus directory
  - recursive locks are now used when dbus_threads_init_default is
    called
  - standard_session_servicedirs tag added to the session.conf
    under a normal build this specifies these service directories:
            /usr/local/share/dbus-1/services
            /usr/share/dbus-1/services
            $HOME/.local/share/dbus-1/services
  - fixed crash when a service directory is specified more than
    once
  - fixed a crash in *BSD when watching config directories for
    changes
  - fixed Irix build by using dirp->__dd_fd to get the file
    descriptor
  - cleaned up the LOCAL_CREDS vs CMGCRED credential code so
    *BSD's don't crash here anymore
  - dbus_message_iter_get_array_len deprecated
  - cleanup-man-pages.sh added so packagers can clean up Doxygen
    man page output from 7 to 2 megs
  - large documentation improvements
  - numerous bug fixes

-------------------------------------------------------------------
Mon Oct 23 11:08:20 CEST 2006 - thoenig@suse.de

- add patch
  dbus-send-do-not-close-shared-connection-thoenig-01.patch:
  Do not call dbus_connection_close() for shared connection.

-------------------------------------------------------------------
Sun Oct 15 20:28:19 CEST 2006 - thoenig@suse.de

- do not kill applications using D-Bus on update (b.n.c #210192)
- fix 'rcdbus status' to report correctly if D-Bus was not running
- run 'dbus-uuidgen --ensure' in %post section
- drop patch dbus-unref-connections-on-close-thoenig-01.patch
  (fix is upstream)
- drop patch dbus-display_DBUS_DAEMONDIR_in_configure.diff (fix is
  upstream)
- drop patch dbus-tools_autobuild.diff (not required any more)
- update to D-Bus 0.94 (skipped 0.93)
  - dbus-uuidgen binary added for future remote machine
    identification
    * packagers should call dbus-uuidgen --ensure in their post
  - GetMachineId peer method added to the bus API
  - dbus_connection_set_route_peer_messages API added to let the
    bus send peer messages directly to an app
  - autolaunch abilities added to dbus-launch with the
    --autolaunch flag
    * This feature allows libdbus to start a session bus if none
      can be found
    * This is an internal feature and should not be used by
      scripts DBUS_SESSION_BUS_ADDRESS is still the correct way to
      specify a session bus
  - dbus-launch now prints out a simple key value pairs instead of
    shell scripts if one of the shell flags aren't used
  - support DBUS_BLOCK_ON_ABORT env variable to cause blocking
    waiting for gdb
  - weak ref are now held for shared connections so the right
    things happen this fixes some pretty major bugs with the way
    connections were handled
  - some refactoring for Windows (doesn't effect Unix)
  - Solaris build fixes
  - MacOSX build fixes
  - Cross compile build fixes. We now assume getpwnam_r is posix
    and va_lists can be copied by value since we can't check this
    in a cross compile. If this is not true for a particular target
    is up to the developer to patch.
  - dbus_threads_init_default added for initalizing threads without
    the need for bindings
  - Filters are now properly removed
  - dbus_connection_open now holds a hard ref to shared connections
  - we now print out a warning and do nothing when someone tries to
    close a shared connection
  - the --introspect switch has been added to the bus for printing
    out introspection data without actually running the bus
  - LOCAL_CREDS socket credentials are now supported for systems
    which support it such as NetBSD
  - generalize kqueue support so it works with NetBSD as well as
    FreeBSD
  - numerous bug fixes and memory leaks patched

-------------------------------------------------------------------
Thu Aug 31 16:25:45 CEST 2006 - dkukawka@suse.de

- added patch dbus-display_DBUS_DAEMONDIR_in_configure.diff to
  expand the complete path of DBUS_DAEMONDIR (b.n.c. #202854)

-------------------------------------------------------------------
Thu Aug 24 02:49:50 CEST 2006 - thoenig@suse.de

- add patch dbus-unref-connections-on-close-thoenig-01.patch: Unref
  connections on dbus_connection_close (b.n.c. #201164).

-------------------------------------------------------------------
Sat Aug 19 10:18:45 CEST 2006 - thoenig@suse.de

- update to D-Bus 0.92
  - proper thread locking added to pending calls
  - threading semantics changed from init early to init before the
    second thread
  - correctly error out when an application tries to acquire or
    release the org.freedesktop.DBus name instead of sending false
    result codes
  - kqueue directory watching code can now be used to monitor
    config file changes on FreeBSD
  - --with-dbus-daemondir configure switch added so the daemon can
    be installed separate from the user binaries
  - Makefiles fixed for cygwin
  - fixed docs and comments to use the D-Bus spelling instead of
    D-BUS
  - many memleaks and bugs fixed

-------------------------------------------------------------------
Thu Aug 17 19:05:22 CEST 2006 - thoenig@suse.de

- update to D-Bus 0.92 CVS snapshot 2006-08-17
- don't crash in dbus_pending_call_get_completed if D-Bus
  connection is used twice in one application
- dbus-1-devel-doc: don't package non-existent HTML files

-------------------------------------------------------------------
Wed Aug 16 14:40:40 CEST 2006 - aj@suse.de

- Do not use xmlto in BuildRequires.

-------------------------------------------------------------------
Tue Aug  1 15:24:38 CEST 2006 - thoenig@suse.de

- split out binings to sparate spec files
- string replacement: s/D-BUS/D-Bus
- spec file cleanups
- remove aaa_base from requires
- drop dbus-1-qt (qt-dbus obsoletes dbus-1-qt)
- new upstream version 0.91 (skipped 0.90)
  - remove some lingering bits left over from the bindings split
  - fix assertion causing D-Bus applications to crash when checks
    are enabled
  - fix a timeout bug which would block applications from being
    auto started
  - API/ABI freeze for 1.0
  - bindings are now split out into seperate packages
  - listActivatableNames added as a method on the bus
  - removed deprecated dbus_connection_disconnect (use
    dbus_connection_close)
  - shared connections are now unreffed on disconnect
  - fixed pending calls for threaded enviornments
  - pending calls get timed out on connection disconnect
  - dbus_connection_send_with_reply returns TRUE and a NULL pending
    call if you call it on a connection object which has been
    disconnected already (it returns FALSE on Out of Memory errors
    only)
  - dbus-monitor now correctly catches methods, not just signals
  - dbus-monitor now prints object paths

-------------------------------------------------------------------
Fri Jul  7 11:17:16 CEST 2006 - adrian@suse.de

- fix build for < 10.1
  * do not use -fstack-protector
- fix build for non-SUSE distros

-------------------------------------------------------------------
Tue Jul  4 09:14:59 CEST 2006 - adrian@suse.de

- fix build for 10.1
- remove requires to -%release which can't work

-------------------------------------------------------------------
Mon Jul  3 12:18:24 CEST 2006 - thoenig@suse.de

- call configure with --exec_prefix and --datadir
- spec file clean up

-------------------------------------------------------------------
Thu Jun 22 12:48:43 CEST 2006 - thoenig@suse.de

- fix build: add freetype2-devel and libpng-devel to dbus-1-qt.spec
- add patch: dbus-pending-reply-revert.diff to avoid crashes of
  multi-threaded applications using libdbus-1.

-------------------------------------------------------------------
Tue Jun 20 12:21:03 CEST 2006 - coolo@suse.de

- split out -qt and -qt3 into their own spec files

-------------------------------------------------------------------
Wed Jun 12 11:13:31 CEST 2006 - thoenig@suse.de

- new upstream version 0.62
  - doc fixes
  - add support for all data-types for the dbus tools
  - fix eavesdropping on method calls (dbus-monitor)
  - fix silent dropping of method calls with interface=NULL
  - fix console ownership problems in Solaris
  - fix installation of dbus-signature.h and #include it in dbus/dbus.h
  - flush the user database cache on config reload
  - GLib bindings:
    - fix memory leaks
    - fix properties in DBusGProxy so that they can be given in any
      order
    - add lots of assertions to ensure correct use
    - remove duplicated code
    - fix static string pointer uses in GPtrArray-based collections
  - Python bindings:
    - remove reference to sys/cdefs.h
  - Qt4 bindings:
    - code reorganized
    - add the dbusidl2cpp, dbuscpp2xml and dbus tools
    - add example programs (ping-pong, complex ping-pong, listnames, chat)
    - updat selftests
    - fix compilation and .moc- and .ui-file processing and cleaning
    - make central classes derive from QObject
    - enhance error reporting
    - many bugfixes
  - Mono bindings:
    - minor bugfixes
- dbus-gcj_fixes.diff:  remove hunk for fastjar
- dbus-qt_moc_configure.diff:  dropped, now upstream
- dbus-qt_compile_fix.diff:  dropped, now upstream
- dbus-mono-args.diff:  dropped, now upstream
- dbus-mono-return-null.diff:  dropped, now upstream
- dbus-pedantic_compile.diff:  dropped, now upstream
- dbus-reply_pending_limit.diff:  dropped, now upstream
- add fastjar to requires of dbus-1-mono

-------------------------------------------------------------------
Mon Apr 24 15:08:07 CEST 2006 - thoenig@suse.de

- Add patch (dbus-mono-exit-on-disconnect.diff) from Aaron Bockover
  to extend the API of the mono bindings for exit_on_disconnect()
  (Novell bug #167824).

-------------------------------------------------------------------
Wed Mar 15 15:33:05 CET 2006 - thoenig@suse.de

- disable dbus-connection-blocks-on-poll.diff as it leads to
  crashes in applications using
  dbus_connection_send_with_reply_and_block ().

-------------------------------------------------------------------
Mon Mar  6 11:21:23 CET 2006 - thoenig@suse.de

- add restart_on_update back to %postun (#143151, #150042)

-------------------------------------------------------------------
Fri Mar  3 09:41:09 CET 2006 - thoenig@suse.de

- Add patch (dbus-connection-blocks-on-poll.diff) in order to fix
  pending replies being delayed if an application using the bus
  blocks on another pending reply. (not tracked in upstream
  bugzilla, only on-list, Novell bug #154916)
- Sync patches with dbus-1-mono

-------------------------------------------------------------------
Wed Mar  1 18:07:18 CET 2006 - thoenig@suse.de

- Add patch (dbus-reply_pending_limit.diff) in order to fix the
  pending replies limit not to be common for all connections.
  (Freedesktop bug #4200, Novell bug #153733)

-------------------------------------------------------------------
Fri Feb 24 16:34:47 CET 2006 - aj@suse.de

- Sync patches with dbus-1-mono.

-------------------------------------------------------------------
Tue Feb 14 15:43:01 CET 2006 - ro@suse.de

- move all bindings except for glib to dbus-1-mono specfile
- remove restart_on_update (only restart on reboot) (#143151)

-------------------------------------------------------------------
Fri Feb  3 14:26:47 CET 2006 - aj@suse.de

- Remove unneeded BuildRequires.

-------------------------------------------------------------------
Sun Jan 29 15:01:18 CET 2006 - aj@suse.de

- Splitup packages dbus-1-qt3-devel, dbus-1-qt-devel (#144857).

-------------------------------------------------------------------
Fri Jan 27 01:08:19 CET 2006 - mls@suse.de

- converted neededforbuild to BuildRequires

-------------------------------------------------------------------
Mon Jan 23 10:44:49 CET 2006 - thoenig@suse.de

- Fixed D-BUS to restart on `rcdbus restart` id session busses
  are running (closes #127969)

-------------------------------------------------------------------
Fri Jan 20 16:49:46 CET 2006 - werner@suse.de

- Make rc script fully conforming with LSB

-------------------------------------------------------------------
Thu Jan 19 13:27:53 CET 2006 - meissner@suse.de

- Use -fstack-protector.
- Added some missing requires to the -devel packages.

-------------------------------------------------------------------
Thu Jan  5 14:24:07 CET 2006 - thoenig@suse.de

- added libxml2-python to Requires of dbus-1-python (closes
  #141225)

-------------------------------------------------------------------
Tue Dec 20 15:51:34 CET 2005 - dmueller@suse.de

- fix Qt4/x86_64 build with Qt 4.1

-------------------------------------------------------------------
Sat Dec 17 11:04:01 CET 2005 - thoenig@suse.de

- renamed sub package for Qt bindings from dbus-1-qt to dbus-1-qt3
- introducing Qt4 bindings, new package is dbus-1-qt
- renamed dbus-qt_compile_fix.diff to dbus-qt3_compile_fix.diff
- added -fno-strict-aliasing to CXXFLAGS
- modified patch:
  * removed configure.in parts of dbus-qt3_compile_fix.diff (fixed
    upstream)
- removed patches:
  * dbus-dnotify_configure-01.diff (fixed upstream)
  * dbus-dnotify_watchdirs-01.diff (fixed upstream)

-------------------------------------------------------------------
Fri Dec  9 02:00:47 CET 2005 - ro@suse.de

- disable selinux

-------------------------------------------------------------------
Tue Nov 22 10:52:23 CET 2005 - coolo@suse.de

- make libdbus-1-qt self containing lib

-------------------------------------------------------------------
Sat Nov 12 16:48:29 CET 2005 - thoenig@suse.de

- added patches to make dnotify actually work for configuration
  file changes.  We now can add new bus policies at runtime.
   * dbus-dnotify_configure-01.diff
   * dbus-dnotify_watchdirs-01.diff

-------------------------------------------------------------------
Thu Oct 20 12:25:03 CEST 2005 - thoenig@suse.de

- added -fPIC to CFLAGS

-------------------------------------------------------------------
Wed Sep 21 17:31:54 CEST 2005 - thoenig@suse.de

- new upstream version 0.50.2 (skipped some)
- removed patches:
   * dbus-disable_kde_dependency.diff (upstream)
   * dbus-transaction_fix.diff (upstream)
   * dbus-session-connect.diff (upstream)
   * dbus-gcj_fix_for_gcc4_on_x86_64.diff (duplicated, see
     dbus-gcj_fixes.diff)

- modified patch:
   * dbus-gcj_fixes.diff (removed reference to $BUILD_ROOT in .la)

-------------------------------------------------------------------
Sat Sep 17 17:38:03 CEST 2005 - dmueller@suse.de

- make header files compileable with -pedantic

-------------------------------------------------------------------
Tue Sep  6 12:55:16 CEST 2005 - dkukawka@suse.de

- fixed return values for rchal start to be LSB conform (#115385)

-------------------------------------------------------------------
Sun Sep  4 09:35:39 CEST 2005 - aj@suse.de

- Add check-build.sh script.

-------------------------------------------------------------------
Tue Aug 30 12:40:20 CEST 2005 - thoenig@suse.de

- Moved man pages to correct sub-packages (closes #114036)

-------------------------------------------------------------------
Tue Aug 30 10:56:11 CEST 2005 - thoenig@suse.de

- Added patch to fix session bus exploit (CAN-2005-0201, closes
  #114043)

-------------------------------------------------------------------
Thu Aug  4 11:50:56 CEST 2005 - thoenig@suse.de

- Replaced previous workaround for #98264 with a proper fix

-------------------------------------------------------------------
Tue Jul 26 13:05:44 CEST 2005 - thoenig@suse.de

- Reduce timeout for (wrongly assumed?) oom situations from 500ms
  to 50ms (closes #98264).

-------------------------------------------------------------------
Mon Jul 18 11:37:10 CEST 2005 - thoenig@suse.de

- new upstream version 0.35.2 (skipped 0.35 and 0.35.1)

- removed patches:

* dbus-python_bindings_gcc4_fix.diff (obsolete)
   * dbus-console-auth-SuSE-01.diff (upstream)

- new patches:

* dbus-gvalue-utils-fix.diff (function returned random data)
  * dbus-python_bindings_fix.diff (unititialized variable)

-------------------------------------------------------------------
Thu Jun 22 09:34:20 CEST 2005 - thoenig@suse.de

- new upstream version 0.34
- new patch `dbus-console-auth-SuSE-01.diff`: this patch adds the
  command line option "--with-console-auth-dir" for resmgr
  integration.

-------------------------------------------------------------------
Tue Jun 22 09:32:16 CEST 2005 - thoenig@suse.de

- moved *.la *.a and *.pc files from dbus-1-glib to dbus-1-devel
- added dbus-1-glib and glib2-devel to Requires of dbus-1-devel

-------------------------------------------------------------------
Thu May 19 10:13:11 CEST 2005 - adrian@suse.de

- fix path to documentation in susehelp desktop file

-------------------------------------------------------------------
Mon May  2 09:55:35 CEST 2005 - lnussel@suse.de

- fix init script dbus-daemon-1 -> dbus-daemon
- use fastjar only on > 9.3

-------------------------------------------------------------------
Thu Apr 28 12:20:12 CEST 2005 - thoenig@suse.de

- new upstream version 0.33
- fixed typo in 'rc.boot.dbus'

-------------------------------------------------------------------
Mon Apr 25 13:25:02 CEST 2005 - thoenig@suse.de

- updated e-mail address in 'rc.boot.dbus'

-------------------------------------------------------------------
Thu Apr 21 13:49:04 CEST 2005 - thoenig@suse.de

- updated short description in 'rc.boot.dbus'

-------------------------------------------------------------------
Wed Apr 20 13:14:12 CEST 2005 - thoenig@suse.de

- D-BUS 0.33 (CVS 2005-04-19)
- ABI changes will affect packages: beagle, gnome, hal,
  ial, kdebase3, submount, tomboy. A tutorial to fix errors caused
  by the ABI/API change:

http://people.redhat.com/johnp/files/dbus_0.23_to_0.30_porting_quickref.txt

- enabled python bindings again. GCC4 fix is provided by
  dbus-python_bindings_gcc4_fix.diff. This patch is to be dropped
  once  pyrex  generates GCC4-clean C code.

-------------------------------------------------------------------
Mon Apr 18 18:19:06 CEST 2005 - ro@suse.de

- use "fastjar" instead of "jar" with gcc-4
- disable python bindings for now
  (generated code is not really gcc-4 compliant)

-------------------------------------------------------------------
Wed Mar 16 18:11:58 CET 2005 - thoenig@suse.de

- applied 'dbus-il-fix.patch' for dbus-1-mono to prevent a crash
  caused by a change in mono.

-------------------------------------------------------------------
Mon Mar 14 18:40:02 CET 2005 - schwab@suse.de

- Fix name of init script.

-------------------------------------------------------------------
Mon Mar 14 14:43:06 CET 2005 - thoenig@suse.de

- changed init order for hal/dbus/resmgr

-------------------------------------------------------------------
Sun Mar 13 21:08:30 CET 2005 - thoenig@suse.de

- applied `dbus-mono-leak.diff` which fixes memory leaks of the
  mono bindings.

-------------------------------------------------------------------
Sat Mar 12 04:53:07 CET 2005 - thoenig@suse.de

- new upstream version 0.23.4

-------------------------------------------------------------------
Thu Mar 10 18:24:14 CET 2005 - thoenig@suse.de

- new upstream version 0.23.3
- removed obsolete patch (python_bindings_x86_64_fix.diff)

-------------------------------------------------------------------
Thu Mar  3 20:32:02 CET 2005 - dkukawka@suse.de

- fixed boot.dbus [see bug# 65775]

-------------------------------------------------------------------
Mon Feb 28 22:56:16 CET 2005 - thoenig@suse.de

- moved files from dbus-1-devel to dbus-1-{glib,java,qt}

-------------------------------------------------------------------
Tue Feb 22 14:13:03 CET 2005 - thoenig@suse.de

- added fix for python bindings to compile on 64 bit
- moved {_datadir}/dbus-1 and {_datadir}/dbus-1/services from
  dbus-1-x11 to dbus-1 package

-------------------------------------------------------------------
Mon Feb 21 16:32:52 CET 2005 - gekker@suse.de

- Fix dbus-1-x11, add directory so dbus-launch will work

-------------------------------------------------------------------
Mon Feb 21 15:31:35 CET 2005 - adrian@suse.de

- avoid kde dependencies to improve our build times.
  The only thing which does need KDE is the configure script,
  the bindings itself are pure Qt

-------------------------------------------------------------------
Sun Feb 20 19:45:01 CET 2005 - thoenig@suse.de

- new upstream version 0.23.2

-------------------------------------------------------------------
Sun Feb 20 19:44:25 CET 2005 - thoenig@suse.de

- new upstream version 0.23.2

-------------------------------------------------------------------
Tue Feb 15 15:30:19 CET 2005 - dkukawka@suse.de

- update to new version 0.23.1

-------------------------------------------------------------------
Tue Feb 15 15:29:39 CET 2005 - dkukawka@suse.de

- update to new version 0.23.1

-------------------------------------------------------------------
Fri Feb  4 21:43:44 CET 2005 - gekker@suse.de

- Use mono-devel-packages in neededforbuild
- pass --enable-mono in ./configure
- Make sure the symbolic link of dbus-sharp.dll is installed

-------------------------------------------------------------------
Thu Feb  3 22:13:08 CET 2005 - thoenig@suse.de

- fixed assignment of .pc files
  * dbus-1.pc      is now owned by dbus-1-devel
  * dbus-glib-1.pc is now owned by dbus-1-glib
  * dbus-sharp.pc  is now owned by dbus-1-mono

-------------------------------------------------------------------
Thu Feb  3 22:07:55 CET 2005 - thoenig@suse.de

- fixed assignment of .pc files
  * dbus-1.pc      is now owned by dbus-1-devel
  * dbus-glib-1.pc is now owned by dbus-1-glib
  * dbus-sharp.pc  is now owned by dbus-1-mono

-------------------------------------------------------------------
Thu Feb  3 17:24:33 CET 2005 - ro@suse.de

- use common macros in pre/post scripts

-------------------------------------------------------------------
Fri Jan 28 14:13:14 CET 2005 - dkukawka@suse.de

- fixed specfile of dbus

-------------------------------------------------------------------
Fri Jan 28 14:10:20 CET 2005 - dkukawka@suse.de

- added aaa_base to requirements
- added /etc/init.d/boot.localfs to prereqy

-------------------------------------------------------------------
Tue Jan 25 17:34:22 CET 2005 - dkukawka@suse.de

- cleaned up requirements in spec-file
- disabled all unneeded bindings within ./configure to reduce
  buildtime

-------------------------------------------------------------------
Tue Jan 25 17:33:36 CET 2005 - dkukawka@suse.de

- cleaned up requirements in spec-file

-------------------------------------------------------------------
Sun Jan 23 21:09:19 CET 2005 - dkukawka@suse.de

- fixed libdir directory for x86_64 in mono package

-------------------------------------------------------------------
Sun Jan 23 21:03:21 CET 2005 - dkukawka@suse.de

- fix libdir directory for x86_64

-------------------------------------------------------------------
Thu Jan 20 16:08:49 CET 2005 - adrian@suse.de

- enable api docu for qt, c# and java
- integrate api docu into suse help

-------------------------------------------------------------------
Thu Jan 13 10:56:28 CET 2005 - dkukawka@suse.de

- update to new version [0.23]. For more infos read the Changelog
  of the src

-------------------------------------------------------------------
Thu Jan 13 10:55:08 CET 2005 - dkukawka@suse.de

- update to new version [0.23]. For more info read the Changelog
  of the src
- changed position in /etc/rc.d/boot.d/, now dbus start depending
  on boot.localnet (this is a workaround to the /var/run - cleanup
  is moved from boot.localnet to boot.localfs)

-------------------------------------------------------------------
Wed Jan 12 10:23:10 CET 2005 - dkukawka@suse.de

- changed some in dbus-1-mono.spec

-------------------------------------------------------------------
Wed Jan 12 10:01:42 CET 2005 - dkukawka@suse.de

- changed rc-script:
  - now dbus start in boot.d
  - start depends on boot.localfs
- changed spec-file, now insserv instead of chkconfig
- fixed bug #49410

-------------------------------------------------------------------
Tue Jan 11 01:05:55 CET 2005 - ro@suse.de

- added /usr/lib/qt3/bin to PATH (for moc)

-------------------------------------------------------------------
Mon Jan 10 12:06:55 CET 2005 - adrian@suse.de

- fix build, qt developer tools aren't in default PATH anymore

-------------------------------------------------------------------
Mon Nov 29 12:31:30 CET 2004 - dkukawka@suse.de

- removed ExclusiveArch, since mono and gtk-sharp for other
  archs available (thanks to ro@suse.de)

-------------------------------------------------------------------
Sun Nov 28 21:24:09 CET 2004 - dkukawka@suse.de

- moved package to ../done/I386 , package is only for %ix86,
  because on other archs we don´t have gtk-sharp
- changed requirements [dbus = %{version}-%{dbus_release}]

-------------------------------------------------------------------
Sun Nov 28 17:22:41 CET 2004 - dkukawka@suse.de

- init

-------------------------------------------------------------------
Thu Nov 25 21:56:24 CET 2004 - dkukawka@suse.de

- removed automatically deleting of DBUS-user and -group in
  uninstall-routine
- readding dbus-1-python package
- changed different due to new automake and python versions
- added Requires and BuildRequires

-------------------------------------------------------------------
Tue Nov 23 19:04:55 CET 2004 - dkukawka@suse.de

- added packages [glib, x11]
- change different things in packages, removed doupled/conflicting
  files in packages [base-rpm, devel, gtk, java, qt]
- changed different in %pre, %preun, %post, %postun sections of the
  spec-file
- stop dbus automatically before uninstall
- add/remove now dbus automatically to/from system services

-------------------------------------------------------------------
Sat Nov 20 22:18:58 CET 2004 - dkukawka@suse.de

- fixed bug in spec-file

-------------------------------------------------------------------
Thu Nov 18 18:41:52 CET 2004 - dkukawka@suse.de

- removed binding package for Python while automake is fixed !

-------------------------------------------------------------------
Wed Nov 17 22:30:38 CET 2004 - dkukawka@suse.de

- added binding packages [java, qt, gtk, python]

-------------------------------------------------------------------
Fri Nov  5 21:13:49 CET 2004 - thoenig@suse.de

- dynamic allocation of user id user messagebus
- dynamic allocation of group id for group messagebus

-------------------------------------------------------------------
Thu Oct 21 00:48:01 CEST 2004 - thoenig@suse.de

- init

Places

File dbus-1.changes of Package dbus-1 (Revision 77e422b48a36a1a05078279cf5bb2886)

Places