Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
openSUSE:Leap:15.0:Rings:1-MinimalX
sg3_utils
sg3_utils.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File sg3_utils.changes of Package sg3_utils
------------------------------------------------------------------- Fri Apr 6 12:52:18 CEST 2018 - hare@suse.de - Update to svn r763: * More NVMe bugfixes * sg_vpd: add device constituents vpd * sg_raw: add --raw option * sg_turs: add --low option * sg_ses: decoding dpage fixes; add --quiet option - rescan-scsi-bus.sh: Fixup syntax error (bsc#1087008) - Use separate repository for SLE15 ------------------------------------------------------------------- Mon Feb 12 10:50:19 UTC 2018 - mwilck@suse.com - dracut.conf: add whitespace at end of line (bsc#1080562) ------------------------------------------------------------------- Fri Feb 9 13:53:43 CET 2018 - hare@suse.de - Update to svn r751: * NVMe bugfixes * sg_seek: new utility * sg_stream_ctl: new utility program - 54-before-scsi-sg3_id.rules: compability rule for systemd (bsc#1079873) - Add dracut.conf to install new rule with dracut ------------------------------------------------------------------- Thu Feb 8 15:37:33 CET 2018 - hare@suse.de - Merge local patch with git repository * Delete sgut-libversioning.diff ------------------------------------------------------------------- Wed Feb 7 16:12:10 CET 2018 - hare@suse.de - Update to svn r744: * sg_write_x: new command for normal/atomic/orwrite etc SCSI WRITE variants * sg_ses: add NVMe support * sg_inq: decode NVMe controller / NSIDs - rescan_scsi_bus.sh: Fix manpage for --forcerescan - 55-scsi-sg3_id.rules: fixes for scsi_id compability (bsc#1079873) - 55-scsi-sg3_id.rules: run sg_inq for SPC devices (bsc#1079873) ------------------------------------------------------------------- Fri Dec 22 09:31:40 CET 2017 - hare@suse.de - sg_inq: check VPD page 0x0 before reading serial number (bsc#1067839) - sg_inq: add option '-o/--only' to skip reading VPD pages (bsc#1067839) - Revert 'postun' rpm spec changes after review ------------------------------------------------------------------- Mon Dec 18 11:31:02 CET 2017 - hare@suse.de - sg_inq: decode standard INQUIRY for CD-ROMs correctly (bsc#1070431) - rescan-scsi-bus.sh: new option for ignore rev change - rescan-scsi-bus.sh: Remove white space - Add 'coreutils' to Requires (bsc#1072744) - Add 'posttrans' to rpm spec (bsc#1071972) ------------------------------------------------------------------- Wed Nov 29 12:18:16 CET 2017 - hare@suse.de - Update to svn r730: * Move testing utilities to 'testing' directory * sg_opcode: check resid and trim response * sg_rep_zones: expand --help option * sg_mode: Add Out-of-band management control page * sg_ses: filer join output on dpage element presence * documentation cleanup - rescan-scsi-bus.sh: Add '--ignore-rev' option - Supplement SCSI modaliases (bsc#1065212) ------------------------------------------------------------------- Fri Oct 13 13:25:58 CEST 2017 - hare@suse.de - Update to svn r721: * Merge SUSE-specific patches with upstream svn * sg_write_atomic: add new program for WRITE ATOMIC * sg_bg_ctl: new background control command * sg_ses: Improve output and option handling * sg_logs: Add --vendor and decode more pages * sg_get_lba_status: add new program * Install rescan-scsi-bus.sh and scsi_logging_level per default ------------------------------------------------------------------- Fri Aug 11 14:45:56 CEST 2017 - hare@suse.de - Drop patch merged with git repository * drop add-lunsearch-filter-to-searchexisting.patch - Drop rules included in git repository * drop 40-usb-blacklist.rules - Update to latest svn snapshot: * sg_rdac: add sanity checks for -f=lun value * sg_vpd improvements * sg_ses: fix uninitialized struct * sg_luns: resync with SAM and SPC drafts * sg_vpd: fix struct misalignment introduced by --force * sg_logs: add --vendor and fixup enumeration - Port patches from SLES: * Add systemd service files for LUN masking (bsc#954600) * 55-scsi-sg3_id.rules: handle VPD page 0x80 correctly (bsc#1006469) * scripts: added udev rules for legacy CCISS (bsc#1006175) * rescan-scsi-bus.sh: Add lunsearch filter to findresized() (bsc#1027176) * Add fc_wwpn_id to generate by-path links for fibrechannel (bsc#1005063) * 55-scsi-sg3_id.rules: allow to override sysfs inquiry (bsc#1012523) * sg_inq: export all NAA values (bsc#1050767) * Silence gcc warnings ------------------------------------------------------------------- Mon Feb 20 11:05:45 CET 2017 - kukuk@suse.de - Remove superfluous insserv PreReq. ------------------------------------------------------------------- Wed Sep 7 16:26:26 CEST 2016 - sparschauer@suse.de - using "--lun" now works correctly (bsc#981452), adding patch: * add-lunsearch-filter-to-searchexisting.patch ------------------------------------------------------------------- Fri Apr 29 09:13:41 CEST 2016 - hare@suse.de - Update to new upstream release 1.43: * sg_senddiag: add --timeout=SEC option * sg_sanitize: add --timeout=SEC option * sg_format: add --timeout=SEC option * sg_decode sense: add --cdb option * sg_ses: handle 2 bit EIIOE field in aes dpage - expand join handling of SAS connectors and others - expand join debug code * sg_logs: fix volume statistics lpage when subpage is zero (ssc5r02a); decode mount history log parameter - decode Requested recovery, TapeAlert response, and Service buffer information lpages for tape - add '--pdt=DT' option * sg_inq: fix potential unbounded loop in --export - update version descriptor list to 20160420 * sg_inq+sg_vpd: update Extended inquiry data vpd page (spc5r09) - add --force option to bypass checking supported vpd pages page and fetch requested page directly * sg_reassign+sg_write_same: fix ULONG_MAX problem * sg_turs+sg_requests: make both accept '--num=NUM' and '--number=NUM' for mutual compatibility * sg_zone: fix debug cdb naming * sg_opcode: add '--enumerate' and '--pdt=' options * sg_raw: add '--enumerate' option * sg_lib: add SSC maintenance in/out sa names - add read buffer(16) command mode names - add sg_decode_transportid_str() * sg_lib_data: sync asc/ascq codes with T10 20160425 * rescan-scsi-bus.sh: harden code * clang --analyze static checker clean ups * shellcheck cleanup on scripts * automake: add AM_PROG_AR to configure.ac - upgrade to version 1.15 - Include patches from upstream: * sg_inq+sg_vpd: add --force option to bypass checking of supported vpd pages * sg_lib_data: add Bind and Unbind to service action out(16) - Remove 0001-sg_vpd-sg_inq-Safe-VPD-page-access.patch; merged with upstream. ------------------------------------------------------------------- Thu Apr 28 14:38:24 CEST 2016 - hare@suse.de - sg_inq,sg_vpd: Safe VPD page access (bsc#945094) * Add 0001-sg_vpd-sg_inq-Safe-VPD-page-access.patch ------------------------------------------------------------------- Thu Feb 18 09:41:03 CET 2016 - hare@suse.de - Update to new upstream release 1.42: * sg_timestamp: new, to report or set timestamp * sg_read_attr: new, supported by tape drives * sg_stpg: fix truncation of target port field * sg_inq: cope with unicode strings, udev fixes - update version descriptor list to 20160125 - '--export': new entries for UUID descriptor * sg_ses: add more field acronyms (ses3r11) 8 sg_logs: add Utilization lpage (sbc4r07) - add Background operation lpage - add Pending defects lpage - add LPS misalignment lpage (sbc4r10) - document '--All' ('-A') option - rework lto tape vendor lpages * sg_vpd: add Block limits extension VPD page - add Device constituents VPD page - add LB Protection VPD page (ssc 15-296r1) - LB provisioning VPD page: expand LBPRZ, add Minimum and Threshold percentage fields - rework lto tape vendor VPD pages * sg_inq+sg_vpd+sg_xcopy: add support for locally assigned UUIDs in VPD page 0x83 (15-267r2) * sg_sanitize: add --znr option (sbc4r07) * sg_rep_zones: add --partial option (zbc-r04) * sg_format: add ffmt option (sbc4r10) - add support for FORMAT MEDIUM (for tape) * sg_raw: document length relationships * rescan-scsi-bus.sh: updates from Suse * sg_lib_data: sync asc/ascq codes with T10 20151126 * sg_lib: add 'sense' categories for SCSI statuses: condition met, busy, task set full, ACA active and task aborted - add pr2serr() extern - change sg_get_sense_str() and dStrHexStr(), return chars written (returned void previously) - add sg_get_sense_descriptors_str() function - add sg_get_designation_descriptor_str() function - sg_get_desig_type_str()+sg_get_desig_assoc_str() and sg_get_desig_code_set_str() added - sg_get_opcode_sa_name() break out zoning in/out, read attribute and read position service actions * sg_cmds_extra: add sg_ll_format_unit2() for FFMT * sg_pr2serr.h: new, to shorten fprintf(stderr, ...) * sg_io_linux, sg_pt_linux: drop SUGGEST_* decoding * sg_unaligned.h: add 48 bit support and gets for variable length unsigned integers - Delete sg3_utils-sg_inq-blacklist.diff; solved differently - Added 40-usb-blacklist.rules (bsc#840054) - Delete sg3_utils-58-scsi-sg3_symlink-fixup.patch; merged with upstream - Delete sg3_utils-flush-fixup.patch; merged with upstream ------------------------------------------------------------------- Mon Nov 16 11:06:52 UTC 2015 - m4mnux@gmail.com - Add sg3_utils-flush-fixup.patch: Fix syntax error when -f (flush failed multipath devices) used in command line. ------------------------------------------------------------------- Mon Oct 5 10:31:04 UTC 2015 - zaitor@opensuse.org - Add sg3_utils-58-scsi-sg3_symlink-fixup.patch: Fix broken line in script (boo#940833, boo#940834, boo#947947). ------------------------------------------------------------------- Wed Jul 8 07:35:53 UTC 2015 - jthumshirn@suse.com - Update to new upstream release 1.41 * sg_zone: new utility for open, close and finish zone commands introduced in zbc-r02 * sg_rep_zones and sg_reset_wp: change opcodes as indicated in zbc-r02 * sg_read_buffer: add READ BUFFER(16) support (spc5r02) * sg_logs: add --enumerate and acronyms * allow decode from hex or binary in file * decode environmental reporting + limits lpages * sg_write_buffer: add --timeout=TO option * sg_lib interface: add sg_lib_pdt_decay(), TPROTO_PCIE plus support for zoning service actions * sg_lib: in Linux blocked devices yield ENXIO from ioctl(SG_IO), map to SG_LIB_CAT_NOT_READY * clean up sg_warnings_stream handling * sg_inq+sg_vpd: fix SCSI name string decoding in device identification VPD page (0x83) * increase sanity on Unit Serial number VPD page * improve rdac vpd page reporting (vendor) * sg_inq: improve NAA handling in dev_id VPD page * update version descriptor list to 20150126 ------------------------------------------------------------------- Fri Feb 13 14:22:36 UTC 2015 - jengelh@inai.de - Update to ne wupstream release 1.40 * New utilities: sg_write_verify (for WRITE AND VERIFY), sg_ses_microcode, sg_sat_read_gplog. * sg_senddiag gained the --maxlen= and --page=PG options * sg_opcodes gained the --compact field * sg_inq: expand Block limits VPD page output - Drop sg3_utils-fix-missing-rule-for-scsi_serial-partitions.patch, sg3_utils-Fixup-formatting-of-invalid-VPD-page-0x83.patch, sg3_utils-Do-not-export-long-identifiers.patch (merged upstream) - Replace symbol version hack (it forced lockstep updates) by sgut-libversioning.diff (allows parallel installation). ------------------------------------------------------------------- Sun Jan 4 13:55:32 UTC 2015 - lnussel@suse.de - blacklist some usb controllers that don't like sg_inq (bnc#840054) Add: sg3_utils-sg_inq-blacklist.diff ------------------------------------------------------------------- Wed Sep 3 15:57:47 CEST 2014 - hare@suse.de - Fixup formatting of invalid VPD pages (bnc#884779) Add: sg3_utils-Fixup-formatting-of-invalid-VPD-page-0x83.patch - sg_inq: Do not export long identifiers (bnc#884779) Add: sg3_utils-Do-not-export-long-identifiers.patch ------------------------------------------------------------------- Wed Jun 25 07:53:48 UTC 2014 - rmilasan@suse.com - Fix missing rule for generating links for partitions also (bnc#883032) Add: sg3_utils-fix-missing-rule-for-scsi_serial-partitions.patch ------------------------------------------------------------------- Fri Jun 20 13:15:12 UTC 2014 - jengelh@inai.de - Add symbol versions to library ------------------------------------------------------------------- Tue Jun 17 09:08:42 UTC 2014 - jengelh@inai.de - Update to new upstream release 1.39 * This release adds some ZBC support in the form of sg_rep_zones and sg_reset_wp. * It tracks changes made by www.t10.org since April 2014. - Remove 0001-Split-59-scsi-sg_utils.rules-for-multipath-support.patch, 0003-sg_inq-compability-links-for-ata_id.patch, 0004-sg_inq-suppress-warning-messages-for-export.patch, sginfo-inq-fields-strip-blank.patch (merged upstream). ------------------------------------------------------------------- Thu May 15 13:34:33 CEST 2014 - hare@suse.de - Create compability links for ATA devices (bnc#876344) Add: 0003-sg_inq-compability-links-for-ata_id.patch - Suppress warnings for sg_inq --export (bnc#876454) Add: 0004-sg_inq-suppress-warning-messages-for-export.patch ------------------------------------------------------------------- Tue Apr 15 16:03:37 UTC 2014 - spargaonkar@suse.com - added patch sginfo-inq-fields-strip-blank.patch sg3_utils: Strip out trailing info from vendor info products fields in inq bnc#863357 - added patches: * sginfo-inq-fields-strip-blank.patch ------------------------------------------------------------------- Fri Apr 11 12:12:47 CEST 2014 - hare@suse.de - Split off 59-scsi-sg_utils.rules to properly support multipathing (bnc#873151) Remove: 0001-59-scsi-sg_utils.rules-skip-symlinks-for-multipath-d.patch Add: 0001-Split-59-scsi-sg_utils.rules-for-multipath-support.patch ------------------------------------------------------------------- Thu Apr 10 11:22:07 CEST 2014 - hare@suse.de - Update to official release 1.38 * Update documentation * Update to latest SPC * Minor fixes * Add: sg3_utils-1.38.tar.xz * Remove: sg3_utils-1.38b7r538.tar.xz * Remove: sg3_utils-1.38r546.patch * Remove: sg3_utils-1.38b12r556.patch - Use 59-scsi-sg3_utils from the rpm Remove: 59-scsi-sg3_utils.rules - Fixup 59-scsi-sg3_utils.rules to not provide symlinks on multipath device paths (bnc#872929) Add: 0001-59-scsi-sg_utils.rules-skip-symlinks-for-multipath-d.patch ------------------------------------------------------------------- Fri Mar 7 11:44:33 CET 2014 - hare@suse.de - Fixup 59-scsi_sg3_utils.rules to provide compability links for ata_id (bnc#866933) ------------------------------------------------------------------- Fri Feb 28 15:15:32 CET 2014 - hare@suse.de - Add 59-scsi-sg3_utils.rules (bnc#865494) ------------------------------------------------------------------- Tue Feb 25 11:26:24 CET 2014 - hare@suse.de - Update to inofficial release 1.38b12r556 (bnc#865494) * Add --inhex parameter to sg_inq * sg_inq: decode ASCII information vpd page * sg_inq: allow page=-1 to force std INQUIRY decoding * sg_inq: improve unit serial number display * sg_vpd: Add LTO and DDS vendor pages * sg_persist: add SOP transport ID * sg_lib_data: sync asc/ascq code with T10 * rescan-scsi-bus.sh: check if FC driver exports issue_lip * Add man page for rescan-scsi-bus.sh - Remove sg3_utils-check-if-hba-supports-issue-lip.patch, has been merged with upstream ------------------------------------------------------------------- Thu Jan 23 08:57:56 CET 2014 - hare@suse.de - Update to inofficial release 1.38r546 (bnc#831778) * sg_ses: error and warning message cleanup - fix --data=- problem with large buffers - new --data=@FN to read hex data from file FN - add --maxlen= option * sg_inq: - add LU_CONG to standard inquiry response - sync version descriptors dated 20131126 - fix overflow in encode_whitespaces * sg_vpd: add LU_CONG to standard inquiry response output - decode Third Party Copy (tpc) page * sg_persist: add PROUT: Replace Lost Reservation (spc4r36) * sg_readcap: for --16 show physical block size if * sg_xcopy: - environment variables: XCOPY_TO_SRC and XCOPY_TO_DST indicate where xcopy command is sent - change default to send xcopy to dst (was src) - improve CL handling of short options (e.g. '-vv') * sg_write_same: repeat if unit attention * sg_rtpg: fix indexing bug with --extended option * sg_lib_data: sync asc/ascq codes with T10 dated 20131110 * sg_cmds_extra: fix sa bug in sg_ll_3party_copy_out() - Update tarball to 1.38b7r537 - Add sg3_utils-1.38r546.patch ------------------------------------------------------------------- Mon Nov 4 01:59:38 UTC 2013 - jengelh@inai.de - Update to new upstream release 1.37 * sg_compare_and_write: add --quiet option to suppress miscompare report * sg_persist: fix core dump on -Q option * sg_unmap: fix core dump on -g option * sg_ses: add --nickname and --nickid options - Remove sg3_utils-Fixup-T10-Vendor-designator-display.patch (merged upstream) ------------------------------------------------------------------- Sun Aug 25 18:45:14 CEST 2013 - ohering@suse.de - Fixup T10 Vendor designator display (bnc#805059) sg3_utils-Fixup-T10-Vendor-designator-display.patch - In rescan-scsi-bus.sh, check if the HBA driver exports issue_lip in sysfs before using it (bnc#780946) sg3_utils-check-if-hba-supports-issue-lip.patch ------------------------------------------------------------------- Thu Jun 13 14:15:26 UTC 2013 - jengelh@inai.de - Implement shlib packaging guidelines; rename sg3_utils-devel to libsgutils-devel (upstream recommendation) - More robust make install call; remove redundant %clean section; simplify file lists ------------------------------------------------------------------- Tue Jun 11 08:56:39 UTC 2013 - rmilasan@suse.com - Update to version 1.36 - sg_vpd: Protocol-specific port information VPD page for SAS SSP, persistent connection (spl3r2), power disable (spl3r3) - block device characteristics: add FUAB bit - sg_xcopy: handle more descriptor types; handle zero maximum segment length; allow list IDs to be disabled; improve skip/seek handling; allow xcopy on destination - sg_reset: and --no-esc option to stop reset escalation - clean up cli, add long option names - sg_luns: add --test=ALUN option for decoding LUNs - decoded luns output in decimal or hex (if -HH given) - add '--linux' option to show Linux LUN after T10 representation, can map one to the other - sg_inq: add --vendor option to show standard inquiry's vendor specific fields in ASCII - take resid into account with response output - sg_sync: add --16 (for 16 byte command) and --timeout= - sg_logs: add data compression page (ssc4) - sg_sat_set_features: increase --lba from 1 to 4 bytes - sg_write_same: add --ndob option (sbc3r35d) - sg_map: mark as deprecated - sginfo: mark as deprecated, especially -l (list) - sg_lib: improve snprintf handling - sg_lib_data: sync asc/ascq codes with T10 20130117 - sg_cmds (lib): if noisy given, give more UA info - make code more C++ friendly ------------------------------------------------------------------- Tue Mar 12 09:13:45 CET 2013 - hare@suse.de - Update to version 1.35 - sg_compare_and_write: new utility - sg_inq+sg_vpd: block device characteristics VPD page: add product_type, WABEREQ, WACEREQ and VBULS fields - sg_inq: more --export option changes for udev - sg_vpd: add more rdac vendor specific vpd pages - sg_verify: add --ebytchk option for sbc3r34 changes - sg_stpg: --offline option: fix 'Invalid state 0xe' - sg_ses: Door Lock element changed to Door element and abbreviation changed from 'dl' to 'do' (ses3r05) - archive/rescan-scsi-bus.sh: upgrade to version 1.53hr - move rescan-scsi-bus.sh to scripts directory - sync to sbc3r34 - sg_lib: sg_ll_verify10+16 expand BYTCHK to 2 bit field - sg_pt_win32, sg_scan(win32): changes for cygwin 1.7.17 - clean up man page summary lines - sg_xcopy: new dd like utility for extended copy command - sg_copy_results: new utility for receive copy results - sg_verify: add 16 byte cdb, bytchk (data-out buffer) and group number support - sync to spc4r36 and sbc3r32 - sg_inq: add --export so sg_inq can replace udev's scsi_id - decode old EMC Symmetrix abuse of VPD page 0x83 - sg_vpd: decode old EMC Symmetrix abuse of VPD page 0x83 - sg_ses: increase max dpage response size to 64 KB - allow ident,locate on enclosure controller - more sanity for additional element status descriptor - sg_sanitize: add --ause, --fail and --test= - sg_luns: add long extended flat space addressing format - sg_logs: add ATA pass-through results lpage (SAT-2) - sg_rtpg: add --extended option - sg_senddiag: list rebuild assist diag page name - sg_pt_linux: expand DID_ (host_byte) codes - cope with a transport error plus sense data - prefer major() over MAJOR() macro - sg_lib: fix sg_get_command_name() service actions - report sdat_ovfl bit (if set) in sense data - decode extended_copy and receive_copy service actions - decode read_buffer and write_buffer modes - decode ATA PT fixed format sense (SAT-2) - sg_cmds_extra: add sg_ll_report_tgt_prt_grp2() - ./configure options: - change --enable-no-linux-bsg to --disable-linuxbsg - add --disable-scsistrings to reduce utility sizes ------------------------------------------------------------------- Wed Jul 4 07:01:46 UTC 2012 - cfarrell@suse.com - license update: GPL-2.0+ and BSD-3-Clause Show aggregation and make compatible with Fedora declaration ------------------------------------------------------------------- Sun Apr 22 11:50:44 UTC 2012 - puzel@suse.com - Update to version 1.33 - sg_ses: major rework of indexes (again), now two level - sg_write_buffer: new --specific option for mode specific field; new mode 13 (spc4r32) - sg_vpd: add hp3par volume info vendor VPD page - fix 'scsi ports' [0x88] page problem - add 'sinq' pseudo page for standard inquiry response - add power consumption page - sg_format: add --poll= option for request sense polling - improve handling of disks > 2 TB and DIF (protection) - sg_logs: LB provision lpage extra (sbc3r28) - sg_modes: application tag mpage subcode 0xf0->0x2 - sg_write_same: no prot fields when wrprotect=0 - sg_get_lba_status: reflect change in sbc3r25 to Parameter Data Length response field (offset reduced from 8 to 4) - sg_inq, sg_vpd: sync with spc4r33 - win32: change DataBufferOffset type per MSDN; caused problem with 64 bit machines (with buffered interface) - sg_luns: tweak documentation for vendor specific reports - add man pages for scsi_loging_level, scsi_mandat, scsi_satl and scsi_temperature ------------------------------------------------------------------- Mon Jan 16 19:59:42 UTC 2012 - tabraham@novell.com - Update to version 1.32 + sg_sanitize: new utility for command added in sb3r27 + sg_sat_identify: add '--ident' to output WWN + sg_ses: major rework of descriptor output + add --index, --descriptor, --join, --clear, --get, and --set options + sg_raw: exit status corrections + sg_decode_sense: add --nospace and --hex options + sg_logs: fix bug with large --maxlen + zero response length when resid implies it is invalid + add scope field to lb provisioning lpage (sb3r27) + sg_inq: sync version descriptors with spc4r31 + sb_lib_data: sync asc/ascq codes with spc4r31 + sg_vpd: add LBPRZ field in LP provisioning VPD page + sg_format: allow format of pdt 7 (some MO drives) + sg_cmd_basic: sg_cmds_process_resp() handle status good with a sense key other than no_sense (e.g. completed) + add README.iscsi - Updated rescan-scsi-bus.sh to v1.56 ------------------------------------------------------------------- Thu Mar 10 08:47:43 UTC 2011 - coolo@novell.com - fix file list ------------------------------------------------------------------- Fri Feb 18 16:41:32 CET 2011 - hare@suse.de - Update to version 1.31: + sg_decode_sense: new utility to decode sense data + sg_vpd: LB provisioning + Block limits pages (sbc3r26) + sync asc/ascq and version descriptors with spc4r28 + sg_get_config, sg_rmsn, sg_verify: add --readonly option + sg_lib: implement forwarded sense data descriptor - decode user data segment referral sense data descriptor + sg_lib, sg_turs, sg_format: more precision for progress indication (two places after decimal point) + sg_lib(win32): add runtime selection of SPT direct or indirect interface - sg_read_buffer+sg_write_buffer: set SPT direct + add examples/forwarded_sense.txt + examples/ref_sense.txt - Changes from version 1.30: + sg_referrals: new utility for REPORT REFERRALS + sbc3r25 renames 'thin' provisioning' to 'logical block provisioning': changes in sg_format, sg_inq, sg_logs, sg_modes, sg_readcap, sg_vpd + sg_inq: update version descriptor list to spc4r27 - extended inquiry vpd page add extended self test completion minutes field + sg_lib: sync asc/ascq list to spc4r27 - dStrHex(): trim excess trailing spaces + sg_read_long: add --readonly option (open() is rw) + sg_raw: add --readonly option (open() is rw) - allow bidirectional commands + sg_vpd: rdac vendor page [0xc8] parse corrections - extended inquiry vpd page add extended self test -completion minutes field + sg_ses: expand --data (in) buffer to 2048 bytes + sg_opcodes: add extended parameter data for TMFs (spc4r26) + sg_dd: clean count calculation, document nocache flag - treat bsg devices as implicit sg_io + sg_write_same: if READ CAPACITY(16) fails try 10 byte variant - anticipate approval of proposal to allow UNMAP and ANCHOR bits to be set on WRITE SAME(10) with '--10' option + sg3_utils man page: sections added for OS device names ------------------------------------------------------------------- Fri Aug 13 11:42:50 CEST 2010 - dimstar@opensuse.org - Update to version 1.29: + sg_rtpg: new logical block dependent state and bit (spc4r23) + sg_start: add '--readonly' option for ATA disks + sg_lib: update asc/ascq list to spc4r23 + sg_inq: update version descriptor list to spc4r23 + sg_vpd: block device characteristics page: fix form factor - update Extended Inquiry VPD page to spc4r23 - update Block Limits VPD page to sbc3r22 - update Thin Provisioning VPD page to sbc3r22 - Automation device serial number and Data transfer device element VPD pages (ssc4r01) - add Referrals VPD page (sbc3r22) + sg_logs: add thin provisioning and solid state media log pages - addition of IBM LTO specific log pages + sg_modes: new page names from ssc4r01 + sg_ses: sync with ses3r02 (SAS-2.1 connector types) + sg_unmap: add '--anchor' option (sbc3r22) + sg_write_same: add '--anchor' option (sbc3r22) + sg_pt interface: add set_scsi_pt_flags() to permit passing through SCSI_PT_FLAGS_QUEUE_AT_TAIL and AT_HEAD flags + add examples/sg_queue_tst+bsg_queue_tst for SG_FLAG_Q_AT_TAIL + add AM_MAINTAINER_MODE to configure.ac to lessen build issues + add BSD_LICENSE file to this and lib directories, refer to it from source and header files. Some source has GPL license - Changes from version 1.28: + sg_unmap: new utility for thin provisioning - add examples/sg_unmap_example.txt + sg_get_lba_status: new utility for thin provisioning + sg_read_block_limits: new utility for tape drives + sg_logs: add cache memory statistics log (sub)page + sg_vpd, sg_inq: extend Block limits VPD page (sbc3r19) + sg_vpd: add Thin provisioning VPD page (sbc3r20) and TapeAlert supported flags VPD page + sg_inq: note VPD page support better in sg_vpd + sg_persist: add transport specific transportID format - allow transportIDs to be read from named file + sg_opcodes: allow --opcode= option to take OP and SA values (comma seperated) - tweak print format, remove test code + sg_requests: remove test code in progress calculation + sg_reset: add target reset option + sg_luns: reduce default maxlen to 8192 (for FreeBSD) + sg_raw: extend max cdb length from 16 to 256 bytes - align heap allocs to page boundaries + sg_lib: sg_set_binary_mode() needs config.h included - add progress indication sense data descriptor (0xa) - change SG3_UTILS_* constants to SG_LIB_* - decode service actions within persistent reserve in/out - sync with spc4r21 + sg_cmds_extra: add sg_ll_unmap() and sg_ll_get_lba_status() + sg_pt_linux: fix check condition but empty sense buffer; - major() macro grief, if present include <linux/kdev_t.h> and use MAJOR() instead + scripts/sas_disk_blink: moved from this package to sdparm + utils/hxascdmp: in Windows set binary mode on read files + examples/sg_persist_tst.sh: add PRIN read full status command + sg_raw,sg_write_buffer,sg_write_long,sg_write_same: in Windows set binary mode on read files + sg_pt_win32: default to non-direct variant of SPT interface - use './configure --enable-win32-spt-direct' to override - non-direct data length set to 16 KB, extended if required + debian: incorporate patch from debian sid ------------------------------------------------------------------- Mon Jun 28 06:38:35 UTC 2010 - jengelh@medozas.de - use %_smp_mflags ------------------------------------------------------------------- Tue Jul 21 14:00:16 CEST 2009 - hare@suse.de - Clean up spec file and remove obsolete cruft ------------------------------------------------------------------- Fri Apr 17 20:15:58 CEST 2009 - crrodriguez@suse.de - remove static libraries and "la" files ------------------------------------------------------------------- Mon Jan 26 15:30:31 CET 2009 - hare@suse.de - Fixes to rescan-scsi-bus.sh: * Implement '--forcerescan' to force a rescan of existing devices * Handle LUN changes correctly * Check variables before evaluation ------------------------------------------------------------------- Wed Oct 29 11:05:47 CET 2008 - garloff@suse.de - rescan-scsi-bus.sh 1.29: * Fix error in script (returning "" does not work) * Support systems without /proc/scsi - Don't install INSTALL ------------------------------------------------------------------- Tue Sep 30 14:11:15 CEST 2008 - hare@suse.de - Add %insserv_prereq (bnc#423204) ------------------------------------------------------------------- Fri Sep 12 20:29:08 CEST 2008 - garloff@suse.de - Update rescan-scsi-bus.sh script to 1.28: * Merge fixes from Hannes * Minor cleanups * Sort hosts numerically ------------------------------------------------------------------- Tue Aug 12 18:25:43 CEST 2008 - garloff@suse.de - Update to sg3_utils-1.27: * Adapted to linux-2.6.26 (sg_map26) * sg_dd uses flock (rw -- if that fails ro) * sg_get_config: OSSC feature (mmc6r02) - Update to sg3_utils-1.26: * Minor fixes and enhancements to sg_sat_phy_event, sg_ses, sg_get_config, sg_verify, sg_vpd, sg_inq, sg_modes, sg_start, sg_request, sg_luns, sg_dd, sg_opcodes, sg_turs. * sg_lib: asc/ascq update for spc4r15, osd2r03 service actions, sense key specific unit attn queue overflow decoding, ... * Restructuring: sg_lib -> sg_lib_data, sg_inq_data, (u)int64_t, sg_io_linux -> lib/. * Documentation enhancements. ------------------------------------------------------------------- Wed Jul 16 09:55:33 CEST 2008 - hare@suse.de - Use correct length parameter for sg_inq (bnc#363438) ------------------------------------------------------------------- Fri May 23 10:22:31 CEST 2008 - hare@suse.de - Use 'Provides' to clean update dependency ------------------------------------------------------------------- Fri May 9 17:31:33 CEST 2008 - schwab@suse.de - Use autoreconf -i. ------------------------------------------------------------------- Thu Apr 24 14:14:14 CEST 2008 - hare@suse.de - Split off from original scsi package.
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
