File yast2-installation.changes of Package yast2-installation

Overview Repositories Revisions Requests Users Attributes Meta

File yast2-installation.changes of Package yast2-installation (Revision 1003fd06d6c4b49a1a981fdb323fcaa7)

Currently displaying revision 1003fd06d6c4b49a1a981fdb323fcaa7 , Show latest

-------------------------------------------------------------------
Thu Nov 30 14:33:07 UTC 2017 - igonzalezsosa@suse.com

- Do not ignore start_multipath setting (bsc#1070343).
- 4.0.14

-------------------------------------------------------------------
Thu Nov 30 06:38:15 UTC 2017 - rbrown@suse.com

- Replace references to /var/adm/fillup-templates with new
  %_fillupdir macro (boo#1069468).

-------------------------------------------------------------------
Thu Nov  2 15:36:38 UTC 2017 - knut.anderssen@suse.com

- Unify firewall proposals and finish clients replacing
  firewall_stage1_finish by firewall_finish. (fate#323460)
- 4.0.13

-------------------------------------------------------------------
Thu Nov  2 13:05:34 CET 2017 - locilka@suse.com

- Cleanup old registration attempts before starting Installer. This
  is needed for restarted installation after it has been aborted
  earlier (bsc#1065167).
- 4.0.12

-------------------------------------------------------------------
Mon Oct 30 15:09:06 UTC 2017 - igonzalezsosa@suse.com

- Always show the license agreement on single product media,
  even during upgrade (bsc#1065172)
- 4.0.11

-------------------------------------------------------------------
Tue Oct 24 10:05:38 UTC 2017 - lslezak@suse.cz

- Less eager inst-sys cleanup, libzypp actually needs some cached
  files during package installation, remove only the white listed
  known files (bsc#1063459)
- 4.0.10

-------------------------------------------------------------------
Fri Oct 20 12:59:37 UTC 2017 - jsrain@suse.cz

- umount efivars properly (bsc#1063063)
- 4.0.9

-------------------------------------------------------------------
Mon Oct 16 15:29:07 UTC 2017 - jreidinger@suse.com

- Write polkit settings even if no desktop is selected
  (bsc#1062788)
- 4.0.8

-------------------------------------------------------------------
Sun Oct 15 22:00:11 UTC 2017 - knut.anderssen@suse.com

- Adapted complex welcome client allowing to continue with the
  installation when there are no products available. (bsc#1059070)
- 4.0.7

-------------------------------------------------------------------
Tue Oct 10 08:34:44 UTC 2017 - jreidinger@suse.com

- Dropped call of dasd_reload which caused renumbering of disks and
  user got confused.(FATE#318138)
- 4.0.6

-------------------------------------------------------------------
Wed Oct  4 10:32:55 CEST 2017 - schubi@suse.de

- AY: Warn the user if an remote installation is not completely
  possible because there are not all needed packages availble in
  the installed system. (bnc#1055279, bnc#1058071)
- 4.0.5

-------------------------------------------------------------------
Tue Sep 26 13:37:17 UTC 2017 - igonzalezsosa@suse.com

- Add support to read release notes from an RPM in the
  repository (fate#323273)
- 4.0.4

-------------------------------------------------------------------
Tue Sep 26 13:35:36 UTC 2017 - jreidinger@suse.com

- Add support for system roles ordering (related to bsc#1049297)

-------------------------------------------------------------------
Tue Sep 26 08:50:31 UTC 2017 - igonzalezsosa@suse.com

- Do not allow changing the selected base product on an already
  registered system (bsc#1060252)

-------------------------------------------------------------------
Mon Sep 25 08:23:25 UTC 2017 - ancor@suse.com

- Re-activated the step to search for system files (users and SSH
  keys) in existing systems. It was temporarily disabled during the
  migration to storage-ng (part of fate#323837).
- 4.0.3

-------------------------------------------------------------------
Tue Sep 12 08:38:17 UTC 2017 - knut.anderssen@suse.com

- Removed obsolete inst_info client which is not used anymore.
  (bsc#1047060)
- 4.0.2

-------------------------------------------------------------------
Mon Sep 11 14:08:49 UTC 2017 - jreidinger@suse.com

- Adapt to new yast2-country changes (needed for FATE#323837)
- 4.0.1

-------------------------------------------------------------------
Tue Sep  5 11:41:50 UTC 2017 - lslezak@suse.cz

- Download release notes only for the selected products (if any
  product is already selected) (bsc#1056872)
- 4.0.0

-------------------------------------------------------------------
Tue Sep  5 10:20:43 UTC 2017 - igonzalezsosa@suse.com

- Fix license confirmation handling on single product medias
  (fate#322276)
- 3.3.13

-------------------------------------------------------------------
Mon Sep  4 12:18:45 UTC 2017 - ancor@suse.com

- Configure Snapper at the end of installation if requested
  (part of fate#318196).
- 3.3.12

-------------------------------------------------------------------
Fri Sep  1 12:43:42 UTC 2017 - igonzalezsosa@suse.com

- On multi-product installation medias, the product selection
  happens in the welcome screen (fate#322276)
- 3.3.11

-------------------------------------------------------------------
Thu Aug 31 12:26:51 UTC 2017 - gsouza@suse.com

- Skip complex welcome module in auto mode.
- 3.3.10

-------------------------------------------------------------------
Wed Aug 30 07:28:06 UTC 2017 - gsouza@suse.com

- Show README.BETA if it exists (bsc#1047060)
- 3.3.9

-------------------------------------------------------------------
Mon Aug 28 15:17:19 UTC 2017 - igonzalezsosa@suse.com

- Show the product's license from libzypp in the welcome screen
  (FATE#322276)
- 3.3.8

-------------------------------------------------------------------
Thu Aug 17 08:22:09 UTC 2017 - igonzalezsosa@suse.com

- Replace Installation::Product and Installation::ProductReader
  classes by Y2Packager::Product and Y2Packager::ProductReader
  (related to FATE#322276)
- 3.3.7

-------------------------------------------------------------------
Mon Aug 14 15:13:42 CEST 2017 - shundhammer@suse.de

- Merged storage-ng branch to master (fate#318196)
- Note: all changes below with this date belong to the merge.
- 3.3.6

-------------------------------------------------------------------
Mon Aug 14 15:13:42 CEST 2017 - ancor@suse.com

- storage-ng: adapted to the new Y2Storage::StorageManager API
  and improved probing and activation of storage devices.

-------------------------------------------------------------------
Mon Aug 14 15:13:42 CEST 2017 - aschnell@suse.com

- adapted inst_disks_activate.rb to storage-ng

-------------------------------------------------------------------
Mon Aug 14 15:13:42 CEST 2017 - schubi@suse.de

- storage-ng: Taking /usr/bin/findmnt in order to evaluate mount
  points. Floppy support removed.

-------------------------------------------------------------------
Mon Aug 14 15:13:42 CEST 2017 - ancor@suse.com

- storage-ng: use the new library for storage hardware probing
  (devicegraph) instead of the old one (targetmap)

-------------------------------------------------------------------
Mon Aug 14 15:13:42 CEST 2017 - ancor@suse.com

- storage-ng: removed dependency from (old) yast2-storage, even
  if it breaks some functionality.

-------------------------------------------------------------------
Mon Aug 14 15:13:42 CEST 2017 - ancor@suse.com

- storage-ng: commented installation-related code relying on the
  old yast2-storage

-------------------------------------------------------------------
Mon Aug  7 13:43:34 UTC 2017 - jreidinger@suse.com

- Fix crash when going back from product selection (FATE#323450)
- 3.3.5

-------------------------------------------------------------------
Fri Aug  4 06:26:43 UTC 2017 - lslezak@suse.com

- Allow using base products from additional repositories
  (FATE#323450)
- 3.3.4

-------------------------------------------------------------------
Mon Jul 31 08:16:23 UTC 2017 - jreidinger@suse.com

- New client for product selection (FATE#323450)
- 3.3.3

-------------------------------------------------------------------
Wed Jul 26 14:42:15 UTC 2017 - jreidinger@suse.com

- drop reading /content (FATE#322386)
- 3.3.2

-------------------------------------------------------------------
Thu Jun 29 11:51:55 UTC 2017 - jreidinger@suse.com

- openSUSE only: reword title of desktop selection dialog
  (boo#1045180)
- 3.3.1

-------------------------------------------------------------------
Thu Jun 29 08:40:43 UTC 2017 - jreidinger@suse.com

- when custom role is selected in desktop selection
  keep default value in /etc/sysconfig/windowmanager (bsc#1030873)
- 3.3.0

-------------------------------------------------------------------
Mon Jun 26 11:11:19 CEST 2017 - shundhammer@suse.de

- Allow different mount point for home partition (Fate#323532)
- 3.2.46

-------------------------------------------------------------------
Mon Jun 19 07:03:16 UTC 2017 - lslezak@suse.cz

- install the yast2-registration package only in SLE (bsc#1043122)
- 3.2.45

-------------------------------------------------------------------
Thu Jun  1 12:58:03 CEST 2017 - schubi@suse.de

- "custom" roles: Initialize pattern selection screen with settings
  defined in the control files. (bnc#1031295)
- 3.2.44

-------------------------------------------------------------------
Tue May 31 21:47:24 UTC 2017 - knut.anderssen@suse.com

- Do not lose the desktop selection when the online repositories is
  pressed. (bsc#1033594)
- Do not allow to continue without desktop selection. (bsc#1040884)
- 3.2.43

-------------------------------------------------------------------
Wed May 31 10:52:59 UTC 2017 - lslezak@suse.cz

- Fixed path to the "adddir" command (it is /sbin instead of /etc)
  (bsc#1041882)
- 3.2.42

-------------------------------------------------------------------
Mon May 29 08:37:19 UTC 2017 - knut.anderssen@suse.com

- Added requirement of 'cwm/widget' in hiding_place as consequence
  of changes made in CWM. (boo#1039901).
- 3.2.41

-------------------------------------------------------------------
Mon May 22 10:50:32 UTC 2017 - lslezak@suse.cz

- Fixed push button label ("Configure Online Repositories")
  (bsc#1039988)
- 3.2.40

-------------------------------------------------------------------
Mon May  8 13:17:17 UTC 2017 - knut.anderssen@suse.com

- Don't crash if the regurl provided by linuxrc is invalid using
  the one provided by the control file as fallback (bsc#1035908).
- 3.2.39

-------------------------------------------------------------------
Wed Apr 26 15:03:33 UTC 2017 - igonzalezsosa@suse.com

- Move CaaSP specific code to yast2-caasp package
  (bsc#1036838)
- 3.2.38

-------------------------------------------------------------------
Wed Apr 26 09:52:01 UTC 2017 - gsouza@suse.com

- bsc#1031840
  - changed CheckFreeSpaceNow to use LANG=en_US.UTF-8

-------------------------------------------------------------------
Thu Apr 20 14:00:08 UTC 2017 - igonzalezsosa@suse.com

- Add a NTP Servers settings to the overview dialog
  (FATE#323249)

-------------------------------------------------------------------
Wed Apr  5 11:31:12 CEST 2017 - jreidinger@suse.com

- Use y2start script instead of y2base (bsc#1027181)
- 3.2.37

-------------------------------------------------------------------
Wed Apr  5 10:31:12 CEST 2017 - schubi@suse.de

- Added configuration-management to inst_finish.
  (FATE#319830)
- 3.2.36

-------------------------------------------------------------------
Tue Apr  4 14:16:28 UTC 2017 - mvidner@suse.com

- Renamed Controller Node to Administration Node (bsc#1032057).
- 3.2.35

-------------------------------------------------------------------
Mon Mar 27 13:39:38 UTC 2017 - igonzalezsosa@suse.com

- Move CaaSP specific code to yast2-caasp (bsc#1030874)
- 3.2.34

-------------------------------------------------------------------
Mon Mar 27 06:50:29 UTC 2017 - lslezak@suse.cz

- Use the shared package download and extraction functionality
  from FATE#320772
- 3.2.33

-------------------------------------------------------------------
Tue Mar 21 11:59:26 UTC 2017 - ancor@suse.com

- Added some extra space to the openSUSE desktop/roles selection
  dialog (improvement on the fix for poo#14936, bsc#1025415).
- 3.2.32

-------------------------------------------------------------------
Thu Mar 16 13:07:44 UTC 2017 - mvidner@suse.com

- Allow proceeding with the installation after a blocking condition
  has been corrected in the overview dialog (bsc#1029291).
- 3.2.31

-------------------------------------------------------------------
Wed Mar 15 10:19:33 UTC 2017 - igonzalezsosa@suse.com

- Improve roles buttons distribution in textmode (related to
  FATE#320772)
- 3.2.30

-------------------------------------------------------------------
Tue Mar 14 12:05:44 UTC 2017 - igonzalezsosa@suse.com

- Fix desktop selection during installation (bsc#1029312)
- 3.2.29

-------------------------------------------------------------------
Mon Mar 13 12:16:23 UTC 2017 - igonzalezsosa@suse.com

- Support to add roles through addons (FATE#320772)
- 3.2.28

-------------------------------------------------------------------
Thu Mar  9 17:48:25 UTC 2017 - jreidinger@suse.com

- fix crash when reading if desktop role should have default
  pre-selected (bsc#1025415)
- 3.2.27

-------------------------------------------------------------------
Wed Mar  8 16:11:59 CET 2017 - mvidner@suse.cz

- Really use the directory.yast file (fate#322372)
- 3.2.26

-------------------------------------------------------------------
Thu Mar  6 13:33:41 UTC 2017 - mfilka@suse.com

- fate#322328
  - adapted all-in-one dialog according to comments from UX
- 3.2.25

-------------------------------------------------------------------
Mon Mar  6 09:39:00 UTC 2017 - mfilka@suse.com

- CaaSP: do not crash when used a dashed url for the controller
  node location (bsc#1024965)
- CaaSP AY: Adapted requirements of yast2-services-manager.
  (FATE#321738)
- bnc#1022546
  - update all-in-one's subdialog (network/kdump/partitioning/...)
    overview when the dialog is closed and do not lose another
    content already entered by user.
- 3.2.24

-------------------------------------------------------------------
Wed Feb 15 17:58:16 UTC 2017 - jreidinger@suse.com

- Add new desktop selection client for opensuse based on roles
  (poo#14936, bsc#1025415)
- drop "inst_new_desktop" client which was replaced by new desktop
  selection one
- 3.2.23

-------------------------------------------------------------------
Tue Feb 14 14:55:08 UTC 2017 - igonzalezsosa@suse.com

- Self-Update only shows errors when a custom URL is used
  (bsc#1025251)
- 3.2.22

-------------------------------------------------------------------
Wed Feb  8 16:42:29 UTC 2017 - kanderssen@suse.com

- CaaSP all-in-one-dialog: added validation to the controller node
  location field, modified label and write it to the minion
  master.conf file at the end of the installation (FATE#321738)
- CaaSP: Display the Beta product warning at start when it is
  present (bsc#1016887)
- Enable CaaSP specific services on the installed system
  (FATE#321738)
- Do not crash if role contain own service to enable (bsc#1022762)
- 3.2.21

-------------------------------------------------------------------
Fri Feb  3 10:07:35 UTC 2017 - jsrain@suse.cz

- Downloading release notes: Do not download them at all during
  AutoYaST (bsc#1009276)
- Use the directory.yast file to check avilable
  translations (fate#322372)
- 3.2.20

-------------------------------------------------------------------
Wed Feb  1 17:07:23 CET 2017 - schubi@suse.de

- Downloading release notes: Do not try again if the host or the
  proxy cannot be resolved (bnc#1022784)
- 3.2.19

-------------------------------------------------------------------
Fri Jan 27 15:55:33 UTC 2017 - kanderssen@suse.com

- Ask for installation confirmation in all-in-one dialog before
  proceed with it. (Fate#322328)
- 3.2.18

-------------------------------------------------------------------
Fri Jan 27 09:11:32 UTC 2017 - jreidinger@suse.com

- Respect newly registered update repos in software proposal and
  do register. (FATE#322328)

-------------------------------------------------------------------
Thu Jan 26 14:16:43 UTC 2017 - jreidinger@suse.com

- handle proposal errors in all-in-one dialog (FATE#322328)

-------------------------------------------------------------------
Wed Jan 25 15:29:02 UTC 2017 - mvidner@suse.com

- Added an all-in-one installation overview for CaaSP (FATE#322328)

-------------------------------------------------------------------
Wed Jan 25 10:41:33 UTC 2017 - igonzalezsosa@suse.com

- Add an option to disable the self-update feature through the
  AutoYaST profile (FATE#319716)
- 3.2.17

-------------------------------------------------------------------
Fri Jan 20 08:44:28 UTC 2017 - mfilka@suse.com

- bnc#1017752
  - do not show language change warning in software proposal
    incorrectly when language was not changed.
- 3.2.16

-------------------------------------------------------------------
Tue Jan 17 15:34:22 UTC 2017 - igonzalezsosa@suse.com

- Do not retry to download release notes if a previous attempt
  failed (bsc#1015794)
- 3.2.15

-------------------------------------------------------------------
Mon Jan 16 12:42:52 UTC 2017 - jreidinger@suse.com

- add ability to roles to enable list of services when selected
  (FATE#321754)

-------------------------------------------------------------------
Mon Jan 16 12:17:38 UTC 2017 - mfilka@suse.com

- fate#321739
  - Made user's interaction possible in case of error in read-only
    proposal.
- 3.2.14

-------------------------------------------------------------------
Thu Jan  5 13:16:08 CET 2017 - schubi@suse.de

- AutoYaST after second stage: Initialize tty1 in order to remove
  old YaST output and to show the cursor again.
  (bnc#1018037)
- 3.2.13

-------------------------------------------------------------------
Wed Dec 14 15:47:02 UTC 2016 - jreidinger@suse.com

Port changes from CASP1.0:

- Change layout of new installation dialog according to UX team
  suggestion (FATE#321754)
- Set root subvolume read-only if configured (Fate##321755)
- Document new control.xml parameter root_subvolume_read_only
- Add new installation dialog with keyboard layout and root
  password (FATE#321754)
- Added worker role dialog (Fate#321754)
- implement support for running additional dialogs for specific
  roles (FATE#321754)
- Added description for readonly_timezone and
  clone_install_recommended_default flag in control-file
  documentation. (Fate#321754, Fate#321764)
- 3.2.12

-------------------------------------------------------------------
Wed Dec  7 14:00:53 UTC 2016 - igonzalezsosa@suse.com

- Do not crash when the proposal screen is configured through
  an AutoYaST profile and tabs are not being used (bsc#1013976)
- 3.2.11

-------------------------------------------------------------------
Tue Nov 22 12:27:17 UTC 2016 - jreidinger@suse.com

- fix missing icon next to SSH Key Import in autoyast
  (bsc#988377)

-------------------------------------------------------------------
Fri Nov 18 15:10:49 UTC 2016 - jreidinger@suse.com

- add missing file causing crash (introduced with generic fix of
  bsc#1003682)
  (invisible in master since autotools support is dropped there)
- 3.2.10

-------------------------------------------------------------------
Thu Nov 17 11:59:06 CET 2016 - shundhammer@suse.de

- Documentation for new storage related parameters in control.xml
  (Fate#321736)

-------------------------------------------------------------------
Mon Nov 14 14:30:12 UTC 2016 - jreidinger@suse.com

- The user has to confirm when the configuration proposal contains
  a non-blocking error (generic fix for bsc#1003682)
- 3.2.9

-------------------------------------------------------------------
Fri Nov 11 16:41:25 CET 2016 - schubi@suse.de

- Fixed bug: AutoYaST hangs while running second stage.
  Removed network.service in the Before section of
  YaST2-Firstboot.service. (bnc#1007752)
- 3.2.8

-------------------------------------------------------------------
Fri Nov 11 13:50:06 UTC 2016 - jreidinger@suse.com

- Do not crash if importing ssh config from system which
  /etc/os-release does not contain pretty name (bsc#1009492)
- 3.2.7

-------------------------------------------------------------------
Mon Oct 31 13:23:38 UTC 2016 - lslezak@suse.cz

- Added support for read-only proposal modules (fate#321739)
- 3.2.6

-------------------------------------------------------------------
Thu Oct 27 15:09:58 CEST 2016 - shundhammer@suse.de

- Documentation for subvolumes in control.xml (fate#321737)

-------------------------------------------------------------------
Thu Oct 20 09:52:00 UTC 2016 - jreidinger@suse.com

- more robust password filtering in y2start.log
  (bsc#798966)
- 3.2.5

-------------------------------------------------------------------
Thu Oct 13 14:15:23 UTC 2016 - igonzalezsosa@suse.com

- Set libyui-ncurses environment before starting the installer
  (related to bsc#780621)
- 3.2.4

-------------------------------------------------------------------
Thu Oct 13 13:55:33 UTC 2016 - igonzalezsosa@suse.com

- Bump version number to release fixes for bnc#999895,
  bsc#988700 and bnc#999953.
- 3.2.3

-------------------------------------------------------------------
Thu Oct  6 12:55:58 CEST 2016 - schubi@suse.de

- AutoYaST upgrade: Do not override the Report module settings in
  the AutoYaST upgrade mode, keep the previous settings
  (bnc#999895).

-------------------------------------------------------------------
Thu Sep 29 08:09:28 UTC 2016 - igonzalezsosa@suse.com

- Translate description of Snapper snapshots (bsc#988700)
- 3.2.2

-------------------------------------------------------------------
Wed Sep 21 11:00:27 CEST 2016 - schubi@suse.de

- Fixed crash if one defined proposal module has not been found on
  system while switching back from "Expert" proposal.
  (bnc#999953)
- 3.2.1

-------------------------------------------------------------------
Wed Sep 14 13:53:41 UTC 2016 - jreidinger@suse.com

- reduce time needed for building this package
- 3.2.0

-------------------------------------------------------------------
Tue Sep 13 12:37:57 UTC 2016 - jreidinger@suse.com

- fix skipping of proposal returning empty hash otherwise it
  creates non sense proposal entry in UI (bnc#994127)
- 3.1.215

-------------------------------------------------------------------
Tue Aug 30 06:55:13 UTC 2016 - lslezak@suse.cz

- Display a warning popup when the installer self-update uses
  the fallback URL instead of the selected SMT or the default SCC
  server (bsc#996179)
- Do not contact the registration server in self-update when
  network is not running, skip self-update completely
- 3.1.214

-------------------------------------------------------------------
Thu Aug 25 14:23:20 UTC 2016 - lslezak@suse.cz

- Move the installer self update step earlier in the workflow
  so the user entered values are not lost after restart and avoid
  repeating some steps again (bsc#985055)
- This also fixes losing some values due to restaring YaST (bsc#993690),
  (bsc#992608)
- Improved the self update URL handling - the boot parameter has
  the highest priority, always ask user when a SLP service is found,
  in AutoYaST mode SLP needs to be enabled in the profile
- Display progress when downloading and applying the updates
- 3.1.213

-------------------------------------------------------------------
Wed Aug 25 12:51:45 UTC 2016 - cwh@suse.com

- Replace unicode bullet char by asterisk for ncurses (bsc#995082)
- 3.1.212

-------------------------------------------------------------------
Thu Aug 25 07:33:10 UTC 2016 - jreidinger@suse.com

- fix writing proposals (bnc#994127)
- 3.1.211

-------------------------------------------------------------------
Wed Aug 17 15:02:02 UTC 2016 - jreidinger@suse.com

- filter out same repositories from extraurls if they differ only
  in trailing slash (bnc#970488)
- 3.1.210

-------------------------------------------------------------------
Tue Aug 16 15:34:43 UTC 2016 - kanderssen@suse.com

- SSH Importer: Width fix to avoid cut of CheckBoxFrame Label
  (fate##319624)
- 3.1.209

-------------------------------------------------------------------
Tue Aug 16 13:28:14 CEST 2016 - locilka@suse.com

- Fixed testsuite for inst_complex_welcome after implementing lazy
  loading in ProductLicense in yast2-packager (bsc#993285)
- 3.1.208

-------------------------------------------------------------------
Fri Aug  5 07:22:59 UTC 2016 - igonzalezsosa@suse.com

- Fix the registration screen initialization when SCC server
  is used during self-update (FATE#319716)
- 3.1.207

-------------------------------------------------------------------
Thu Aug  4 10:02:28 UTC 2016 - igonzalezsosa@suse.com

- Retrieve the self-update URL from the registration
  server (SCC/SMT) (FATE#319716)
- 3.1.206

-------------------------------------------------------------------
Wed Aug  3 17:06:46 CEST 2016 - locilka@suse.com

- UI, UX and internal handling for the Welcome screen optimized to
  prevent from not showing that the license needs to be accepted
  (bsc#980374).
- 3.1.205

-------------------------------------------------------------------
Fri Jul 29 07:32:46 UTC 2016 - ancor@suse.com

- If the user has skipped multipath activation, don't ask again
  after installer self-update (bsc#989770)
- 3.1.204

-------------------------------------------------------------------
Fri Jul 22 13:48:12 UTC 2016 - igonzalezsosa@suse.com

- Don't halt the installation if installer updates server
  cannot be reached when using AutoYaST (bsc#988949)
- 3.1.203

-------------------------------------------------------------------
Thu Jul 21 11:52:59 UTC 2016 - jreidinger@suse.com

- simplify and speed up inst_finish client (bnc#986649)
- add test suite for inst_finish client
- 3.1.202

-------------------------------------------------------------------
Mon Jul 18 13:13:05 UTC 2016 - lslezak@suse.cz

- Run extra inst-sys cleanup to free more memory on systems with
  low memory (bsc#974601)
- 3.1.201

-------------------------------------------------------------------
Thu Jul 14 08:10:16 UTC 2016 - lslezak@suse.cz

- Properly adjust the OOM killer (oom_score_adj has a different
  range than the original oom_adj) (bsc#974601)
- 3.1.200

-------------------------------------------------------------------
Tue Jul 12 16:14:28 CEST 2016 - schubi@suse.de

- Added AutoYaST schema file "ssh_import".
  (fate#319624)
- 3.1.199

-------------------------------------------------------------------
Mon Jun 27 13:00:24 UTC 2016 - jreidinger@suse.com

- Make writing of bootloader settings the last step so that other
  installation steps (kdump, cio-ignore) do not have to waste time
  repeating it
  (bnc#986649)
- 3.1.198

-------------------------------------------------------------------
Thu Jun 23 08:17:24 UTC 2016 - lslezak@suse.cz

- Display more information in the error popup when downloading
  the optional installer updates fails (bsc#986091)
- 3.1.197

-------------------------------------------------------------------
Thu Jun 16 13:31:16 UTC 2016 - igonzalezsosa@suse.com

- Avoid restarting YaST when self-update repository exists but
  is empty (bsc#985113)
- 3.1.196

-------------------------------------------------------------------
Wed Jun 15 15:15:15 CEST 2016 - snwint@suse.de

- call set_videomode to adjust video mode (bsc#974821)
- 3.1.195

-------------------------------------------------------------------
Tue Jun 14 14:17:53 UTC 2016 - igonzalezsosa@suse.com

- Fix architecture detection during self-update (bsc#984656)
- 3.1.194

-------------------------------------------------------------------
Thu Jun  2 11:09:33 UTC 2016 - schubi@suse.de

- Adapt AutoYaST to support import of SSH server keys/configuration
  (fate#319624)
- 3.1.193

-------------------------------------------------------------------
Thu Jun  2 10:09:33 UTC 2016 - igonzalezsosa@suse.com

- Drop yast2-installation-devel-doc package (fate#320356)
- 3.1.192

-------------------------------------------------------------------
Wed Jun  1 11:41:27 UTC 2016 - igonzalezsosa@suse.com

- When importing SSH keys/configuration, only regular files
  will be considered (bsc#982522)
- Force YaST2-Firstboot.service to run after
  YaST2-Second-Stage.service (bsc#980365)
- 3.1.191

-------------------------------------------------------------------
Mon May 30 14:35:05 UTC 2016 - lslezak@suse.cz

- Move the debugger invocation code to yast2-ruby-bindings package
  to use the same implementation at run time (FATE#318421)
- 3.1.190

-------------------------------------------------------------------
Thu May 26 13:17:42 UTC 2016 - kanderssen@suse.com

- System Role: centered dialog (ncurses).

-------------------------------------------------------------------
Wed May 25 15:49:41 UTC 2016 - kanderssen@suse.com

- More visual improvements in the SSH keys importing proposal
  summary based on blog entry feedback. (Fate#319624)
- 3.1.189

-------------------------------------------------------------------
Wed May 25 13:07:59 UTC 2016 - lslezak@suse.cz

- Start the Ruby debugger at the beginning of installation
  when Y2DEBUGGER is set (FATE#318421)
- 3.1.188

-------------------------------------------------------------------
Tue May 17 08:17:51 UTC 2016 - ancor@suse.com

- Visual improvement in the SSH keys importing proposal summary

-------------------------------------------------------------------
Mon May 16 16:39:34 UTC 2016 - ancor@suse.com

- The user is now informed about SSH keys to be reused (copied
  from a previous system) during system installation.
- The user can select a different partition (or none) to read the
  keys from and whether to also copy config files.
- SSH import functionality not longer depending from
  "copy_to_system" feature.
- Fate#319624
- 3.1.187

-------------------------------------------------------------------
Mon May 16 08:29:25 UTC 2016 - lslezak@suse.cz

- SSH installation: handle closing the initial installation screen
  by the window manager close button (bsc#979499)
- 3.1.186

-------------------------------------------------------------------
Mon May  9 15:14:22 CEST 2016 - schubi@suse.de

- Do not copy licenses from inst-sys to target system.
  Showing EULA location in the installed system.
  (fate#219341)
- 3.1.185

-------------------------------------------------------------------
Fri May  6 11:09:28 UTC 2016 - jsrain@suse.cz

- get more texts for roles dialog from control file, allow
  a general label (bsc#974625)
- 3.1.184

-------------------------------------------------------------------
Thu May  5 13:39:46 UTC 2016 - ancor@suse.com

- Always read the lists of local users in the previous system to
  have them available during user importing (part of fate#319624)
- 3.1.183

-------------------------------------------------------------------
Wed Apr 20 10:47:12 UTC 2016 - knut.anderssen@suse.com

- Disk Activation step will be skipped in case of installer update
  success (bsc#974409)
- License agreement will be remembered in case of going back after
  a installer update.
- 3.1.182

-------------------------------------------------------------------
Tue Apr 19 09:08:35 UTC 2016 - igonzalezsosa@suse.com

- Fix handling of license acceptance in welcome screen
  (bsc#975774)
- 3.1.181

-------------------------------------------------------------------
Fri Apr 15 12:51:00 UTC 2016 - lslezak@suse.cz

- Run the automatic installer self update also in the AutoYaST
  mode, read the optional custom URL from the profile ("general" ->
  "self_update_url" node) (FATE#319716)
- 3.1.180

-------------------------------------------------------------------
Wed Apr 13 07:14:09 UTC 2016 - mfilka@suse.com

- bsc#956473
  - improved formatting of network interfaces listing
- 3.1.179

-------------------------------------------------------------------
Tue Apr 12 15:09:15 UTC 2016 - jreidinger@suse.com

- do not install perl-Bootloader-YAML on target system as it is no
  longer needed (FATE#317701)
- 3.1.178

-------------------------------------------------------------------
Mon Apr  4 09:48:42 UTC 2016 - igonzalezsosa@suse.com

- Automatic update during installation will use Zypper repositories
  instead of Driver Update Disks (FATE#319716).
- 3.1.177

-------------------------------------------------------------------
Wed Mar 23 16:32:31 UTC 2016 - cwh@suse.com

- Moved proc_modules.scr to yast2.rpm to avoid that yast-sound
  depends on yast-installation (bsc#972310)
- 3.1.176

-------------------------------------------------------------------
Tue Mar 15 07:41:01 UTC 2016 - knut.anderssen@suse.com

- Added automatic update during installation (FATE#319716)
- 3.1.175

-------------------------------------------------------------------
Mon Mar 14 13:09:52 UTC 2016 - mvidner@suse.com

- System Role: align labels (FATE#317481).
- System Role: pop-up if changing the role to a different one.
- 3.1.174

-------------------------------------------------------------------
Mon Mar 14 09:39:50 UTC 2016 - igonzalezsosa@suse.com

- Moved Yast::Transfer::FileFromUrl here from yast2-update
  (FATE#319716).
- 3.1.173

-------------------------------------------------------------------
Fri Mar  4 14:24:49 UTC 2016 - mvidner@suse.com

- Added a System Role step in the installation (FATE#317481).
- 3.1.172

-------------------------------------------------------------------
Mon Feb 29 09:05:16 UTC 2016 - mfilka@suse.com

- bsc#956473
  - network interfaces listing shows all IPv4 / IPv6 addresses per
    device
- 3.1.171

-------------------------------------------------------------------
Fri Feb 26 08:36:55 UTC 2016 - ancor@suse.com

- Ensure plymouth does not interfere with X11 when executing
  yast2-firstboot (bsc#966874)
- 3.1.170

-------------------------------------------------------------------
Sun Feb 21 21:15:02 UTC 2016 - mfilka@suse.com

- bnc#960703
  - network service setup moved into yast2-network package.
- 3.1.169

-------------------------------------------------------------------
Wed Feb 17 16:03:56 UTC 2016 - cwh@suse.com

- Remove autoyast clone button (fate#317970) 
- 3.1.168

-------------------------------------------------------------------
Thu Dec 22 15:53:34 CET 2015 - schubi@suse.de

- Removing network dependencies in the service files in order to
  prevent booting cycles in Tumbleweed. (bnc#954908)
- 3.1.167

-------------------------------------------------------------------
Mon Dec 21 08:08:15 UTC 2015 - jsrain@suse.cz

- fixed function name to check zKVM hypervisor (bsc#956736)
- 3.1.166

-------------------------------------------------------------------
Fri Dec 11 09:17:16 UTC 2015 - jsrain@suse.cz

- don't enforce the disk activation dialog on zKVM (bsc#956736)
- 3.1.165

-------------------------------------------------------------------
Wed Dec  2 13:55:07 UTC 2015 - mvidner@suse.com

- Ensure second stage and YaST-Firstboot don't get killed by
  getty when running over 2nd or 3rd serial console (bsc#935965)
- 3.1.164

-------------------------------------------------------------------
Thu Nov 26 09:09:59 UTC 2015 - jreidinger@suse.com

- Do not crash in proposal client if zfcp proposal reports itself
  as unavailable (bnc#956745)

-------------------------------------------------------------------
Wed Nov 25 13:15:19 UTC 2015 - lslezak@suse.cz

- Save the software selection for using it later in AutoYaST
  when deploying installation images (bsc#956325, bsc#910728)
- 3.1.163

-------------------------------------------------------------------
Fri Nov  6 11:59:26 UTC 2015 - ancor@suse.com

- Ensure second stage and YaST-Firstboot don't get killed by
  getty when running over serial console (bsc#935965)
- 3.1.162

-------------------------------------------------------------------
Fri Oct  9 13:32:36 UTC 2015 - ancor@suse.com

- Language selection screen fixed to immediately apply the keyboard
  layout after changing it automatically (bsc#947969).
- 3.1.161

-------------------------------------------------------------------
Thu Oct  1 15:55:54 UTC 2015 - ancor@suse.com

- Simplified second stage systemd unit to avoid dependencies cycles
  (bnc#947521 and bnc#931643). Logic moved to YaST startup scripts.
- 3.1.160

-------------------------------------------------------------------
Fri Sep  4 07:07:33 UTC 2015 - jsrain@suse.cz

- fix bug preventing to finish proposal in some sutuations
  (bsc#944334)
- 3.1.159

-------------------------------------------------------------------
Thu Sep  3 14:41:07 CEST 2015 - locilka@suse.com

- Fixed setting language / languages in the installation welcome
  screen (bsc#943746, bsc#944035)
- 3.1.158

-------------------------------------------------------------------
Wed Sep  2 09:43:21 UTC 2015 - igonzalezsosa@suse.com

- Move #second_stage_required? method to InstFunctions module
  to be used by AutoYaST (bnc#892091)
- 3.1.157

-------------------------------------------------------------------
Tue Aug 25 10:17:24 CEST 2015 - schubi@suse.de

- fixed cio_ignore testcase
  This testcase is for bnc#941406
- 3.1.156

-------------------------------------------------------------------
Thu Aug 13 13:26:56 CEST 2015 - schubi@suse.de

- AutoYaST S390: handling cio_ignore
  Entry <general><cio_ignore> in order to set it
  (values: true/false). If it is not set cio_ignore is true.
  So it is backward compatible.
  (bnc#941406)
- cio_ignore does not make sense for KVM or z/VM. So checking
  for KVM and z/VM and evtl. disabling cio_ignore (fate#317861).
- 3.1.155

-------------------------------------------------------------------
Tue Aug 11 15:50:49 CEST 2015 - schubi@suse.de

- AutoYaST second stage: YaST2-Second-Stage.service
  Continue installation even if plymouth has returned an error.
  (bnc#940878)
- 3.1.154

-------------------------------------------------------------------
Fri Aug  7 12:53:08 UTC 2015 - igonzalezsosa@suse.com

- Fix release notes loading when network is not working (bsc#940648)
- 3.1.153

-------------------------------------------------------------------
Wed Aug  5 11:45:25 UTC 2015 - jsrain@suse.cz

- store cio_ignore settings before installing bootloader
  (bsc#933177)
- 3.1.152

-------------------------------------------------------------------
Fri Jul 24 13:01:22 UTC 2015 - jsrain@suse.cz

- avoid duplicating release notes for products (bsc#935599)
- 3.1.151

-------------------------------------------------------------------
Tue Jul 21 09:16:03 UTC 2015 - mvidner@suse.com

- Moved client code to lib/installation/clients to enable test
  coverage measurements.
- 3.1.150

-------------------------------------------------------------------
Wed Jul  1 13:50:55 CEST 2015 - shundhammer@suse.de

- Cleanup for snapshots made during installation (bnc#935923)
- 3.1.149

-------------------------------------------------------------------
Wed Jul  1 10:46:50 CEST 2015 - locilka@suse.com

- Fixed handling user request to change an installation proposal
  (bsc#936448)
- 3.1.148

-------------------------------------------------------------------
Mon Jun 29 13:11:57 UTC 2015 - lslezak@suse.cz

- fixed menu button label in the proposal (bsc#936427)
- 3.1.147

-------------------------------------------------------------------
Mon Jun 29 08:41:17 UTC 2015 - jreidinger@suse.com

- add ability to hide export button (fate#315161)
- 3.1.146

-------------------------------------------------------------------
Wed Jun 17 09:29:09 CEST 2015 - locilka@suse.com

- Implemented triggers for installation proposal (FATE#317488).
  Any *_proposal client can define 'trigger' in 'MakeProposal'
  that defines in which circumstances it should be called again
  after all proposals have been called, e.g., if partitioning or
  software selection changes.
- 3.1.145

-------------------------------------------------------------------
Tue Jun  2 08:41:03 UTC 2015 - jreidinger@suse.com

- fix crash in Upgrade when creating post upgrade snapshot
  (fate#317973)
- 3.1.144

-------------------------------------------------------------------
Thu May 28 12:41:49 UTC 2015 - igonzalezsosa@suse.com

- add a client to create a snapshot after installation/upgrade
  (fate#317973)
- 3.1.143

-------------------------------------------------------------------
Wed May 20 19:29:48 UTC 2015 - lslezak@suse.cz

- set Xvnc server resolution to 96 dpi to fix broken layout in VNC
  installations (defaults to 75 dpi) (bsc#919456)
- 3.1.142

-------------------------------------------------------------------
Fri Apr 24 06:01:14 UTC 2015 - ancor@suse.com

- Fixed an error preventing the VNC connection during second
  installation stage of AutoYaST when using VNC=1 (bnc#923901)
- 3.1.141

-------------------------------------------------------------------
Wed Apr 20 13:11:40 CEST 2015 - schubi@suse.de

- Fixed differnt bugs in proposal overview with multiple tabs.
- Checking if plymouth is available while starting second
  installation stage for AutoYaST.
- 3.1.140

-------------------------------------------------------------------
Thu Apr 16 13:02:23 CEST 2015 - locilka@suse.com

- Always enable systemd startup services for Second Stage and
  Firstboot (bsc#924278)
- 3.1.139

-------------------------------------------------------------------
Thu Apr  2 09:27:55 UTC 2015 - jreidinger@suse.com

- avoid endless loop when confirm update in proposal runner
  (FATE#315161)
- 3.1.138

-------------------------------------------------------------------
Wed Apr  1 18:54:34 UTC 2015 - jreidinger@suse.com

- fix method missing error in proposal_runner (FATE#315161)
- 3.1.137

-------------------------------------------------------------------
Wed Apr  1 11:39:32 UTC 2015 - jreidinger@suse.com

- fix dependencies in proposal_store (FATE#315161)
- 3.1.136

-------------------------------------------------------------------
Fri Mar 27 13:14:22 UTC 2015 - jreidinger@suse.com

- allow proposal runner dialog to use different proposal store
  (FATE#315161)
- 3.1.135

-------------------------------------------------------------------
Tue Feb 17 14:24:19 CET 2015 - aschnell@suse.de

- get list of mounts from /proc/mounts in umount_finish (for
  fate#318392)
- 3.1.134

-------------------------------------------------------------------
Mon Feb 16 12:44:16 UTC 2015 - cwh@suse.com

- Delete or copy install.inf as applicable (bnc#897066)
- 3.1.133

-------------------------------------------------------------------
Wed Feb 11 09:03:38 UTC 2015 - lslezak@suse.cz

- removed redundant initialization label (bnc#878538)
- 3.1.132

-------------------------------------------------------------------
Fri Feb  6 12:56:53 UTC 2015 - ancor@suse.com

- The unit tests are now compatible with RSpec 3 (bnc#916364)
- 3.1.131

-------------------------------------------------------------------
Wed Feb  4 13:15:43 UTC 2015 - lslezak@suse.cz

- support custom display number in "display_ip" boot option
  (bnc#913888)
- 3.1.130

-------------------------------------------------------------------
Tue Feb  3 11:11:49 CET 2015 - schubi@suse.de

- AutoYaST: If the system starts in multi-user mode plymouth will
  be quit while installation in order to ensure that installation
  will be finished on console 1 and the login prompt will be
  shown.
  (bnc#903682,889757,897956)

-------------------------------------------------------------------
Thu Jan 29 17:10:44 UTC 2015 - jsrain@suse.cz

- allow keyboard layout testing in language dialog (bsc#889549)
- 3.1.129

-------------------------------------------------------------------
Tue Jan 27 13:39:57 CET 2015 - jsuchome@suse.cz

- explicitely set language packages for installation during the
  live install (bnc#904103)
- 3.1.128

-------------------------------------------------------------------
Mon Jan 26 16:09:01 UTC 2015 - jreidinger@suse.com

- fix typo causing error in installation ( catched by openQA )

-------------------------------------------------------------------
Mon Jan 26 10:21:19 UTC 2015 - jreidinger@suse.com

- Properly install new Proposal* libs to fix installation

-------------------------------------------------------------------
Tue Jan 13 12:27:52 UTC 2015 - jreidinger@suse.com

- Refactored inst_proposal into Installation::ProposalRunner and
  Installation::ProposalStore.
- 3.1.127

-------------------------------------------------------------------
Tue Jan 13 12:27:40 UTC 2015 - jsrain@suse.cz

- fixed progress bar during (live) image installation (bsc#854378)

-------------------------------------------------------------------
Wed Jan  7 14:27:28 UTC 2015 - jreidinger@suse.com

- do not stuck during copy of logs files (bnc#897091)
- 3.1.126

-------------------------------------------------------------------
Thu Dec 18 20:12:47 UTC 2014 - lslezak@suse.cz

- Fix bashisms and shebangs in scripts (by "Ledest")
- 3.1.125

-------------------------------------------------------------------
Wed Dec 10 15:57:59 CET 2014 - aschnell@suse.de

- drop check for Gtk since Gtk UI of YaST is no longer supported
  (bsc#908607)
- 3.1.124

-------------------------------------------------------------------
Thu Dec  4 09:50:16 UTC 2014 - jreidinger@suse.com

- remove X-KDE-Library from desktop file (bnc#899104)

-------------------------------------------------------------------
Wed Nov 26 16:53:17 UTC 2014 - ancor@suse.com

- Added more debug information in order to track bnc#897091
- 3.1.122

-------------------------------------------------------------------
Fri Nov 14 09:51:04 UTC 2014 - ancor@suse.com

- Merging changes from 3.1.116.1 (SLE12 maintenance branch)
- Fixed the "previously used repositories" step to work properly
  when reached using the back button (bnc#889791)
- 3.1.121

-------------------------------------------------------------------
Tue Nov  4 08:32:27 UTC 2014 - jreidinger@suse.com

- Improve dialog asking if system should be cloned (bnc#900028)
- 3.1.120

-------------------------------------------------------------------
Mon Nov  3 16:19:30 CET 2014 - schubi@suse.de

- AutoYaST Second Stage: Fixed a crash in package management when
  running in Qt UI with libproxy1-config-kde4 package installed.
  (bnc#866692)
- 3.1.119

-------------------------------------------------------------------
Fri Oct 31 07:41:09 UTC 2014 - jreidinger@suse.com

- do not write obsolete /etc/syconfig/boot RUN_PARALLEL key
  (bnc#896207)
- 3.1.118

-------------------------------------------------------------------
Thu Oct 30 07:35:52 UTC 2014 - lslezak@suse.cz

- properly setup locale in installation start script to display
  texts and labels correctly in a texmode installation and also
  to translate all buttons in graphical mode (removed "testutf8"
  calls, it has been dropped, always set UTF-8 locale) (bnc#902411)
- 3.1.117

-------------------------------------------------------------------
Wed Sep 17 16:04:11 UTC 2014 - lslezak@suse.cz

- additionaly return file system type in ".run.df" agent result,
  (to use it in the disk usage calculation bnc#896176)
- 3.1.116

-------------------------------------------------------------------
Thu Sep  4 12:21:25 UTC 2014 - mvidner@suse.com

- Use a more flexible rubygem requirement syntax (bnc#895069)
- 3.1.115

-------------------------------------------------------------------
Wed Aug 28 15:31:55 UTC 2014 - ancor@suse.com

- Enabled remote access on systems installed using VNC (bnc#893501)
- 3.1.114

-------------------------------------------------------------------
Thu Aug 28 15:04:59 CEST 2014 - locilka@suse.com

- Setting data for &product; macro (used in helps) as soon as
  the base-product repository is initialized (bnc#886608)
- 3.1.113

-------------------------------------------------------------------
Wed Aug 27 15:39:52 CEST 2014 - locilka@suse.com

- Fixed [Abort] button handling in Disks Activation dialog
  (bnc#893281)
- 3.1.112

-------------------------------------------------------------------
Wed Aug 27 10:33:03 CEST 2014 - schubi@suse.de

- Autoyast: Second stage will not be called at all. This bug has
  been generated due the fix in bnc#886464.
- 3.1.111

-------------------------------------------------------------------
Mon Aug 25 09:15:13 CEST 2014 - schubi@suse.de

- Autoyast
  -- Disabling second installation stage via autoyast
     configuration "second_stage".
  -- Centralized minimal configuration and disabling more
     configuration steps like X11, user, default_desktop,...
  -- bnc#886464 and bnc#892091
- 3.1.110

-------------------------------------------------------------------
Mon Aug 18 12:30:53 UTC 2014 - jreidinger@suse.com

- workaround problem with missing capabilities in image deployment
  (bnc#889489)
- 3.1.109

-------------------------------------------------------------------
Thu Aug  7 11:50:28 CEST 2014 - snwint@suse.de

- use oom_score_adj instead of oom_adj (bnc #890432)
- 3.1.108

-------------------------------------------------------------------
Thu Aug  7 08:20:36 UTC 2014 - jreidinger@suse.com

- update ca certificates after upgrade (bnc#889616)
- 3.1.107

-------------------------------------------------------------------
Mon Jul 28 11:52:43 UTC 2014 - lslezak@suse.cz

- use short product name for the default base product release notes
  (read from the installation medium) (bnc#885247)
- display at least an empty dialog when downloading release notes
  to hide the previous dialog in the installation workflow
  (bnc#889196)
- 3.1.106

-------------------------------------------------------------------
Thu Jul 24 14:42:59 UTC 2014 - lslezak@suse.cz

- do not repeat release notes downloading on network time out
  (bnc#885486)
- 3.1.105

-------------------------------------------------------------------
Thu Jul 24 11:52:43 CEST 2014 - aschnell@suse.de

- do not log sensitive information in y2start.log (bnc#888645)
- 3.1.104

-------------------------------------------------------------------
Tue Jul 22 08:13:41 CEST 2014 - snwint@suse.de

- linuxrc already provides proxy settings in URL form - so use it
- 3.1.103

-------------------------------------------------------------------
Mon Jul 21 12:10:43 CEST 2014 - schubi@suse.de

- taking display-manager.service instead of xdm.service in the
  second boot stage (bnc#886654, 884447)
- Workaround of bug in plymouth --> using deactivate option
  in second boot stage in order to start ncurses yast correctly
  (bnc#886488)
- 3.1.102

-------------------------------------------------------------------
Wed Jul 16 09:15:10 UTC 2014 - jsrain@suse.cz

- retranslate release notes button when going back in workflow
  (bnc#886660)
- 3.1.101

-------------------------------------------------------------------
Tue Jul 15 15:44:41 CEST 2014 - locilka@suse.com

- Asking user for confirmation while aborting the installation in
  disk activation dialog (bnc#886662)
- 3.1.100

-------------------------------------------------------------------
Fri Jul  4 08:48:03 UTC 2014 - jreidinger@suse.com

- Copy multipath blacklist to target system (bnc#885628)
- 3.1.99

-------------------------------------------------------------------
Thu Jul  3 09:14:53 UTC 2014 - jreidinger@suse.com

- remove useless steps from system analysis because it confuses
  users (bnc#885609)
- 3.1.98

-------------------------------------------------------------------
Mon Jun 30 14:34:59 UTC 2014 - jreidinger@suse.cz

- restore: use restore script instead of manual unpacking tarball
  to also remove newly generated content when rollbacking
  (bnc#882039)
- 3.1.97

-------------------------------------------------------------------
Mon Jun 23 16:09:32 CEST 2014 - locilka@suse.com

- Changed /bin/rm path to /usr/bin/rm path (bnc#882453)
- 3.1.96

-------------------------------------------------------------------
Mon Jun 23 13:02:27 UTC 2014 - jreidinger@suse.com

- directly export autoyast profile to target file (bnc#881108)
- 3.1.95

-------------------------------------------------------------------
Thu Jun 19 19:05:10 UTC 2014 - lslezak@suse.cz

- removed random_finish client, haveged service is by default
  enabled, no need for explicit enabling by Yast
  (gh#yast/yast-installation#214)
- 3.1.94

-------------------------------------------------------------------
Wed Jun 18 11:47:26 UTC 2014 - lslezak@suse.cz

- make sure the CIO ignore config file ends with a new line
  (bnc#883198)
- 3.1.93

-------------------------------------------------------------------
Tue Jun 17 12:34:33 UTC 2014 - lslezak@suse.cz

- inst_upgrade_urls.rb: set the future target distribution to not
  ignore the SCC online repositories in libzypp (bnc#881320)
- 3.1.92

-------------------------------------------------------------------
Mon Jun 16 12:33:18 UTC 2014 - jreidinger@suse.com

- write list of active devices for cio_ignore ( partially written
  by Ihno )
- 3.1.91

-------------------------------------------------------------------
Thu Jun 12 15:20:04 UTC 2014 - jreidinger@suse.com

- restore backup if yast failed during installation/upgrade
  (bnc#882039)
- 3.1.90

-------------------------------------------------------------------
Thu Jun 12 08:27:01 UTC 2014 - lslezak@suse.cz

- properly enable the add-on module in the installation workflow
- 3.1.89

-------------------------------------------------------------------
Tue Jun  3 13:53:15 UTC 2014 - lslezak@suse.cz

- inst_upgrade_urls.rb client:
  - remove old repositories (repo files) to avoid loading old
    SLE11 repositories when refreshing a registered service
    (bnc#880971)
  - remove old services to get rid of the old NCC service
  (Note: everything is backed up into /var/adm/backup/upgrade/zypp
  directory)
- 3.1.88

-------------------------------------------------------------------
Thu May 29 08:23:21 UTC 2014 - lslezak@suse.cz

- better error message for accepting the license (bnc#875183)
- 3.1.87

-------------------------------------------------------------------
Wed May 28 11:00:51 CEST 2014 - aschnell@suse.de

- close port 6000 during installation (bnc#879262)
- 3.1.86

-------------------------------------------------------------------
Wed May 21 10:32:51 UTC 2014 - jreidinger@suse.com

- do not call reipl multiple times (patch by Ihno)
- 3.1.85

-------------------------------------------------------------------
Fri May 16 12:19:30 UTC 2014 - jsrain@suse.cz

- reduced time-out for downloading release notes when behind
  firewall (bnc#878265)
- 3.1.84

-------------------------------------------------------------------
Fri May 16 08:37:23 UTC 2014 - mvidner@suse.com

- Fixed "undefined method" if an add-on has empty release notes URL
  (bnc#877705)
- 3.1.83

-------------------------------------------------------------------
Fri May 16 07:11:52 UTC 2014 - jsrain@suse.cz

- adjusted wording when deploying image to disk (bnc#877666)
- 3.1.82

-------------------------------------------------------------------
Wed May 14 11:10:05 UTC 2014 - jreidinger@suse.com

- Use new bootloader API to set kernel parameters (bnc#869608)
- 3.1.81

-------------------------------------------------------------------
Tue May 13 13:51:52 UTC 2014 - jreidinger@suse.com

- Fix haveged path to kill it properly (patch by Ihno) (bnc#876876)
- 3.1.80

-------------------------------------------------------------------
Tue May 13 10:09:55 CEST 2014 - gs@suse.de

- enable services for FCoE by calling fcoe-client finish script
  (bnc#877352)
- 3.1.79

-------------------------------------------------------------------
Fri May  9 10:44:11 UTC 2014 - jreidinger@suse.com

- ensure maximum size of prep partition for ppc64 (bnc#867345)
  ( part of patch made by dinaar@suse.com )
- 3.1.78

-------------------------------------------------------------------
Fri May  9 10:15:34 UTC 2014 - jsrain@suse.cz

- adjusted downloading release notes to work also for extensions
  (bnc#876700)
- 3.1.77

-------------------------------------------------------------------
Wed Apr 30 11:01:12 UTC 2014 - jreidinger@suse.com

- use correct keywords for cio ignore kernel params (bnc#874902)
- move cio_ignore step after bootloader step to have sections 
  generated (bnc#873996)
- 3.1.76

-------------------------------------------------------------------
Fri Apr 25 13:21:52 UTC 2014 - mfilka@suse.com

- bnc#872086
  - always copy network configuration. Even if network is not
    running during installation
- 3.1.75

-------------------------------------------------------------------
Fri Apr 25 08:22:06 UTC 2014 - jsrain@suse.cz

- enhanced handling of release notes from media (contrary to those
  downloaded on-line) (bnc#874996)
- 3.1.74

-------------------------------------------------------------------
Thu Apr 24 16:02:13 CEST 2014 - locilka@suse.com

- Changed inst_system_analysis to read Product information
  (that uses libzypp) after initializing libzypp (bnc#873877)
- 3.1.73

-------------------------------------------------------------------
Wed Apr 23 08:48:13 UTC 2014 - jsrain@suse.cz

- enable top bar with logo during installation (bnc#868722)
- 3.1.72

-------------------------------------------------------------------
Tue Apr 15 16:51:58 CEST 2014 - locilka@suse.com

- Switched from the old to the new network setup client for remote
  repositories (bnc#869640)
- 3.1.71

-------------------------------------------------------------------
Tue Apr 15 07:02:35 UTC 2014 - jreidinger@suse.com

- fix crash from last fix and adapt it to cooperate nice with
  autoinstallation (bnc#873458)
- 3.1.70

-------------------------------------------------------------------
Mon Apr 14 14:38:22 UTC 2014 - jreidinger@suse.com

- return error message if base product not found and continue in
  installation(bnc#873458)
- 3.1.69

-------------------------------------------------------------------
Mon Apr 14 10:11:52 CEST 2014 - locilka@suse.com

- removed loading 'pciehp' Kernel module (added for SLE 11 by FATE
  #311991) - it is now built-in Kernel (bnc#865834)
- 3.1.68

-------------------------------------------------------------------
Fri Apr 11 08:44:10 UTC 2014 - jsrain@suse.cz

- added missing files to package (bnc#872925)
- 3.1.67

-------------------------------------------------------------------
Thu Apr 10 09:34:30 UTC 2014 - mvidner@suse.com

- Put wizard title on the left instead of on top (bnc#868859)
- 3.1.66

-------------------------------------------------------------------
Thu Apr 10 09:15:56 UTC 2014 - jsrain@suse.cz

- added handling of release notes for slide show (bnc#871158)
- 3.1.65

-------------------------------------------------------------------
Wed Apr  9 10:07:02 CEST 2014 - snwint@suse.de

- save a copy of pbl.log
- 3.1.64

-------------------------------------------------------------------
Fri Apr  4 15:33:40 CEST 2014 - snwint@suse.de

- remove LIBGL_ALWAYS_INDIRECT (bnc #869172)
- 3.1.63

-------------------------------------------------------------------
Thu Apr  3 12:15:49 UTC 2014 - jreidinger@suse.com

- do not write network configuration from upgrade to system
  (bnc#871178)
- 3.1.62

-------------------------------------------------------------------
Wed Apr  2 09:25:38 UTC 2014 - jreidinger@suse.com

- remove ssh_service_finish as it is handle in
  firewall_stage1_finish due to split of ssh port open and sshd
  enablement (bnc#865056)
- 3.1.61

-------------------------------------------------------------------
Sun Mar 30 17:15:03 UTC 2014 - mfilka@suse.com

- bnc#869719
  - fixed parameters forcing manual network configuration on user's
    request at disks activation screen
- 3.1.60

-------------------------------------------------------------------
Mon Mar 24 14:48:36 UTC 2014 - jreidinger@suse.com

- change cio_ignore kernel parameter according to kernel changes
  (bnc#869463)
- 3.1.59

-------------------------------------------------------------------
Mon Mar 24 12:33:47 UTC 2014 - jreidinger@suse.com

- avoid constant redefinition warning(BNC#869202)
- 3.1.58

-------------------------------------------------------------------
Wed Mar 19 12:45:27 UTC 2014 - lslezak@suse.cz

- skip "Installation Options" dialog when online repository option
  should not be displayed (part of bnc#868942)
- 3.1.57

-------------------------------------------------------------------
Fri Mar 14 14:43:06 CET 2014 - snwint@suse.de

- set LIBGL_ALWAYS_INDIRECT in ssh mode (bnc #868175)
- enable yast theme in ssh mode
- 3.1.56

-------------------------------------------------------------------
Fri Mar 14 08:15:01 UTC 2014 - jsrain@suse.cz

- download on-line version of release notes (fate#314695)
- 3.1.55

-------------------------------------------------------------------
Thu Mar 13 09:46:18 UTC 2014 - jreidinger@suse.com

- add kernel parameters for s390 when cio_ignore enabled to never
  blacklist console or ipl devices (fate#315318)
- 3.1.54

-------------------------------------------------------------------
Wed Mar 12 12:00:40 UTC 2014 - mfilka@suse.com

- bnc#858523
  - dropped disabling network configuration code. yast2-network is
    in charge of it now.
- 3.1.53

-------------------------------------------------------------------
Mon Mar 10 13:01:48 UTC 2014 - jsrain@suse.cz

- don't hide ReleaseNotes button going back fron inst proposal
  (bnc#867389)
- 3.1.52

-------------------------------------------------------------------
Fri Mar  7 16:00:42 UTC 2014 - lslezak@suse.cz

- run scc_finish client if present (FATE#312012)
- 3.1.51

-------------------------------------------------------------------
Thu Mar  6 09:15:24 UTC 2014 - jreidinger@suse.com

- fix malformed string exception if cio ignore is disabled
  (bnc#866995)
- 3.1.50

-------------------------------------------------------------------
Tue Mar  4 09:13:41 UTC 2014 - jreidinger@suse.com

- call proper bash agent otherwise cio ignore feature do not work
  (bnc#866614)
- 3.1.49

-------------------------------------------------------------------
Mon Mar  3 12:57:24 UTC 2014 - jreidinger@suse.com

- do not crash if there is no general section in autoyast profile
  (BNC#866529)
- 3.1.48

-------------------------------------------------------------------
Thu Feb 27 15:08:12 CET 2014 - aschnell@suse.de

- reset proposal after rescanning storage (bnc#865579)
- 3.1.47

-------------------------------------------------------------------
Thu Feb 27 13:55:16 UTC 2014 - jreidinger@suse.com

- revert back complete skip of probing due to disks with activation
  (BNC#865579)
- 3.1.46

-------------------------------------------------------------------
Thu Feb 27 12:54:37 UTC 2014 - jreidinger@suse.com

- Do not rerun system probing as it is already done (BNC#865579)
- 3.1.45

-------------------------------------------------------------------
Wed Feb 26 09:15:50 UTC 2014 - jreidinger@suse.com

- implement cio ignore feature during installation for s390x
  (FATE#315586)
- 3.1.44

-------------------------------------------------------------------
Tue Feb 25 16:11:08 CET 2014 - locilka@suse.com

- Removed an icon from License Agreement dialog (bnc#865575)
- 3.1.43

-------------------------------------------------------------------
Tue Feb 25 14:14:59 CET 2014 - locilka@suse.com

- Adapted ignored_features to handle possibly missing Cmdline entry
  from Linuxrc (bnc#861465)
- 3.1.42

-------------------------------------------------------------------
Tue Feb 25 13:27:34 CET 2014 - locilka@suse.cz

- Removed hard-coded color and RichText formatting from
  installation confirmation dialog (#bnc#865371)
- 3.1.41

-------------------------------------------------------------------
Fri Feb 21 14:54:01 CET 2014 - snwint@suse.de

- Make vnc use real yast theme (bnc #855246) and make vnc screen size configurable.
- 3.1.40

-------------------------------------------------------------------
Fri Feb 21 09:16:18 UTC 2014 - mvidner@suse.com

- ssh installation: fix network start after reboot (bnc#850446)
- 3.1.39

-------------------------------------------------------------------
Wed Feb 19 15:22:00 CET 2014 - locilka@suse.com

- Prevent from re-defining CopyFilesFinishClient class (bnc#864631)
- 3.1.38

-------------------------------------------------------------------
Wed Feb 19 14:51:24 CET 2014 - locilka@suse.com

- Writing bootloader as late as possible, several configs need to
  be written and coppied to the installed system first (bnc#860089)
- 3.1.37

-------------------------------------------------------------------
Tue Feb 18 17:09:08 CET 2014 - locilka@suse.com

- Copying all udev rules from inst-sys to installed system
  (bnc#860089)
- 3.1.36

-------------------------------------------------------------------
Mon Feb 17 13:45:08 UTC 2014 - jreidinger@suse.com

- fix detection if ssh daemon run otherwise ssh installation do not
  reboot after first stage(BNC#864260)
- 3.1.35

-------------------------------------------------------------------
Wed Feb 12 11:44:20 UTC 2014 - jreidinger@suse.com

- fix namespace collision that cause error in installation
- 3.1.34

-------------------------------------------------------------------
Mon Feb 11 15:26:47 UTC 2014 - jreidinger@suse.com

- keep proper installation mode after cloning(BNC#861520)
- 3.1.33

-------------------------------------------------------------------
Tue Feb 11 14:55:36 UTC 2014 - jreidinger@suse.com

- fix dependencies to properly require new ruby bindings
- 3.1.32

-------------------------------------------------------------------
Mon Feb 10 14:31:52 UTC 2014 - jsrain@suse.cz

- removed unused release_notes_popup.rb

- Remove initialisation of Report in autoinst mode from 
  inst_system_analysis. Not needed any more since autoyast Profile 
  is now processed before inst_system_analysis gets called
  (bnc#862829).
- 3.1.31

-------------------------------------------------------------------
Fri Feb  7 09:36:00 UTC 2014 - jreidinger@suse.com

- Implement minimal installation feature (FATE#313149)
- 3.1.30

-------------------------------------------------------------------
Mon Feb  3 14:36:34 UTC 2014 - jreidinger@suse.com

- fix false positive errors in log for easier debugging in future
- 3.1.29

-------------------------------------------------------------------
Fri Jan 31 12:04:52 UTC 2014 - lslezak@suse.cz

- inst_inc_all.rb - added missing import (bnc#860263)
- 3.1.28

-------------------------------------------------------------------
Thu Jan 30 15:43:05 UTC 2014 - jreidinger@suse.com

- Remove write to non-existing /etc/sysconfig/suseconfig
  (FATE#100011)
- 3.1.27

-------------------------------------------------------------------
Thu Jan 30 15:42:52 CET 2014 - aschnell@suse.de

- fixed DASD detection (bnc#860398)
- 3.1.26

-------------------------------------------------------------------
Tue Jan 28 15:37:15 UTC 2014 - jreidinger@suse.com

- Fix exporting configuration in first stage (FATE#308539)
- 3.1.25

-------------------------------------------------------------------
Mon Jan 27 09:56:26 UTC 2014 - mfilka@suse.com

- fate#316768, bnc#854500
  - enable network service according product feature
- 3.1.24

-------------------------------------------------------------------
Fri Jan 24 12:01:29 UTC 2014 - lslezak@suse.cz

- removed inst_scc.rb client (moved to yast2-registration)
- 3.1.23

-------------------------------------------------------------------
Tue Jan 21 14:18:08 UTC 2014 - jreidinger@suse.com

- Remove icons from system analysis according to Ken's comments
  (fate#314695)
- 3.1.22

-------------------------------------------------------------------
Tue Jan 21 12:15:21 UTC 2014 - jreidinger@suse.com

- Remove "Change..." button in non-textual installation
- Add "Export Configuration" button in non-textual installation
  (FATE#308539)
- Add "Export Configuration" menu item in textual installation
  (FATE#308539)
- 3.1.21

-------------------------------------------------------------------
Tue Jan 21 08:48:17 UTC 2014 - jsrain@suse.cz

- adjusted UI according to Ken's comments (fate#314695)
- 3.1.20

-------------------------------------------------------------------
Mon Jan 13 09:58:46 UTC 2014 - jreidinger@suse.com

- add clone proposal and finish client (FATE#308539)
- 3.1.19

-------------------------------------------------------------------
Wed Jan  8 12:46:34 UTC 2014 - jsrain@suse.cz

- added capability to install OEM images (fate#316326)
- added handling Release Notes button (fate#314695)

-------------------------------------------------------------------
Fri Dec 20 09:32:08 UTC 2013 - vmoravec@suse.com

- Add abort and fail hooks for installation
- 3.1.18

-------------------------------------------------------------------
Thu Dec 12 14:50:32 UTC 2013 - lslezak@suse.cz

- control files have been moved to a separate package/git repo
  (https://github.com/yast/yast-installation-control)
- 3.1.17

-------------------------------------------------------------------
Wed Dec 11 09:54:10 UTC 2013 - lslezak@suse.cz

- fixed Makefile.am (added missing inst_scc.rb)
- 3.1.16

-------------------------------------------------------------------
Tue Dec 10 08:46:11 UTC 2013 - vmoravec@suse.com

- Show hook summary only if some hooks failed
- 3.1.15

-------------------------------------------------------------------
Thu Dec  5 15:32:24 UTC 2013 - jreidinger@suse.com

- fix opening zfcp client in disk activation on s390
- 3.1.14

-------------------------------------------------------------------
Thu Dec  5 15:25:18 UTC 2013 - lslezak@suse.cz

- added a new client for SCC registration (first iteration, UI
  only, does not work yet)

-------------------------------------------------------------------
Wed Dec  4 16:11:37 UTC 2013 - jreidinger@suse.com

- fix failure in remote disks activation client
- 3.1.13

-------------------------------------------------------------------
Wed Dec  4 08:30:37 UTC 2013 - lslezak@suse.cz

- removed "trang" dependency (requires complete Java stack, convert
  the file directly in the source repository)
- 3.1.12

-------------------------------------------------------------------
Tue Dec  3 15:11:17 UTC 2013 - jreidinger@suse.com

- remove server base scenario and media check clients from SLE
  installation (FATE#314695)
- add storage proposal dialog to SLE installation (FATE#314695)
- 3.1.11

-------------------------------------------------------------------
Tue Dec  3 13:40:27 UTC 2013 - vmoravec@suse.com

- Show popup window with used hooks before installation finished
- 3.1.10

-------------------------------------------------------------------
Mon Dec  2 12:28:26 UTC 2013 - jreidinger@suse.com

- Add direct link to network communication from remote disks
  activation (FATE#314695, part of NI requirements)
- 3.1.9

-------------------------------------------------------------------
Thu Nov 28 13:01:44 UTC 2013 - vmoravec@suse.com

- Add hooks to main installation client
- 3.1.8

-------------------------------------------------------------------
Wed Nov 20 13:21:57 UTC 2013 - lslezak@suse.cz

- removed support for automatic 2nd stage (the 2nd stage has been
  dropped completely) (FATE#314695)
- 3.1.7

-------------------------------------------------------------------
Tue Nov 19 10:19:13 CET 2013 - locilka@suse.com

- Proposing separate /home partition on SLES and SLES for VMware
  (FATE#316624)

-------------------------------------------------------------------
Mon Nov 18 13:28:32 UTC 2013 - lslezak@suse.cz

- move some steps from removed 2nd stage to the 1st stage
- "inst_mode" client: removed installation/update switch,
  renamed to "inst_installation_options" 
- 3.1.6

-------------------------------------------------------------------
Tue Nov 12 09:24:25 UTC 2013 - lslezak@suse.cz

- control file cleanup:
  * remove the 2nd stage in installation (FATE#314695)
  * removed autoconfiguration support in the 2nd stage (the 2nd
    stage has been removed completely)
  * repair mode removed (not supported) (FATE#308679)

-------------------------------------------------------------------
Mon Nov 11 14:21:37 UTC 2013 - vmoravec@suse.com

- 3.1.5
- replace runlevel entries in control files with default_target
  entries
- replace dependency on yast2-runlevel with yast2-services-manager

-------------------------------------------------------------------
Thu Nov  7 11:45:45 UTC 2013 - mfilka@suse.com

- bnc#849391
  - removed explicit start of second phase of SuSEfirewall2 
    initialization. Not needed when systemd is in use.
- 3.1.4

-------------------------------------------------------------------
Thu Oct 31 11:32:01 UTC 2013 - lslezak@suse.cz

- install "perl-Bootloader-YAML" package
- removed "Use Automatic Configuration" option from the
  installation mode dialog (the 2nd stage has been removed)
- 3.1.3

-------------------------------------------------------------------
Tue Oct 29 13:17:59 UTC 2013 - lslezak@suse.cz

- install only "perl-YAML-LibYAML" and "perl-bootloader" packages
  to the target system
- updated scr_switch_debugger.rb client

-------------------------------------------------------------------
Fri Oct 26 11:39:17 UTC 2013 - jsrain@suse.cz

- show release notes button (fate#314695)

-------------------------------------------------------------------
Fri Oct 25 10:06:07 CEST 2013 - aschnell@suse.de

- removed long obsolete EVMS entries from control file (see
  fate#305007)

-------------------------------------------------------------------
Wed Oct 23 07:27:28 UTC 2013 - lslezak@suse.cz

- removed autorepeat workaround for bnc#346186, not needed anymore,
  xset might not be installed (bnc#846768)
- 3.1.2

-------------------------------------------------------------------
Tue Oct 22 16:46:18 CEST 2013 - locilka@suse.com

- Extended support for ignored_features: They can be also mentioned
  in PTOptions and thus not appended to Kernel command line
  (FATE#314982)

-------------------------------------------------------------------
Tue Oct 15 14:15:31 CEST 2013 - locilka@suse.com

- Added support for ignore[d][_]feature[s] (FATE#314982) allowing
  to skip some unwanted features of the installer
- 3.1.1

-------------------------------------------------------------------
Thu Oct 10 14:48:46 CEST 2013 - locilka@suse.com

- Dropped modem and DSL detection (and configuration) from
  installation proposal (FATE#316263, FATE#316264)

-------------------------------------------------------------------
Fri Sep 27 16:34:11 UTC 2013 - lslezak@suse.cz

- do not use *.spec.in template, use *.spec file with RPM macros
  instead
- 3.1.0

-------------------------------------------------------------------
Fri Sep 27 14:17:54 CEST 2013 - jsuchome@suse.cz

- yast2-mouse was dropped, do not call its components (bnc#841960)
- 3.0.7

-------------------------------------------------------------------
Thu Sep 26 10:47:32 CEST 2013 - jsuchome@suse.cz

- fix console status after the installation (bnc#750326)
- 3.0.6

-------------------------------------------------------------------
Tue Sep  3 11:55:45 CEST 2013 - jsuchome@suse.cz

- do not mention xorg-x11 in the control files (bnc#837450) 
- remove obsoleted part of X11 related code
- 3.0.5

-------------------------------------------------------------------
Fri Aug  9 06:36:31 UTC 2013 - mfilka@suse.com

- bnc#798620
    - removed proposed hotfix for the bug. The hotfix could block 
    starting firewall under some circunstances.
    - (re)starting firewall is handled in yast2.rpm since 3.0.2
- 3.0.4

-------------------------------------------------------------------
Wed Aug  7 12:57:05 CEST 2013 - jsuchome@suse.cz

- use pure ruby solution when sorting proposal items

-------------------------------------------------------------------
Tue Aug  6 11:30:53 CEST 2013 - jsuchome@suse.cz

- use pure ruby solution when sorting destkop items, so major desktop
  (with same order number) won't get resorted
- 3.0.3

-------------------------------------------------------------------
Mon Aug  5 13:16:04 CEST 2013 - jsuchome@suse.cz

- check the product profiles during system analysis and
  copy them to installed system (backport of fate#310730)
- 3.0.2

-------------------------------------------------------------------
Sun Aug  4 11:48:21 UTC 2013 - lslezak@suse.cz

- removed empty agents/Makefile.am and unused testsuite/Makefile.am
- removed obsolete BuildRequires: doxygen perl-XML-Writer sgml-skel
  yast2-testsuite yast2-storage yast2-pkg-bindings yast2-packager

-------------------------------------------------------------------
Fri Aug  2 14:25:07 CEST 2013 - jsuchome@suse.cz

- remove trang from BuildRequires: rng can be created during
  packaging, not needed during build

-------------------------------------------------------------------
Thu Aug  1 11:21:35 CEST 2013 - jsuchome@suse.cz

- correctly write supporturl (port of bnc#520169) 
- limit the number of the searched disks to 8 of each kind to
  shorten time needed for finding SSH keys (port of fate#305873)
- 3.0.1

-------------------------------------------------------------------
Wed Jul 31 08:30:58 UTC 2013 - yast-devel@opensuse.org

- converted from YCP to Ruby by YCP Killer
  (https://github.com/yast/ycp-killer)
- version 3.0.0

-------------------------------------------------------------------
Mon Jul 29 13:43:13 CEST 2013 - fehr@suse.de

- ignore SIGHUP in YaST2.Second-Stage to make autoyast installs
  with serial console succeed again (bnc#825728, bnc#823224)

-------------------------------------------------------------------
Thu Jul 11 12:23:36 CEST 2013 - aschnell@suse.de

- fixed sshd check (bnc#825160)
- 2.24.10

-------------------------------------------------------------------
Thu Jul  4 13:56:19 CEST 2013 - jsuchome@suse.cz

- show release notes of newest product first (bnc#827590)
- 2.24.9

-------------------------------------------------------------------
Tue Jun 25 10:17:46 CEST 2013 - jsuchome@suse.cz

- adapt control.xml to offical Factory one:
  added e17 desktop, enabled online repositories
- 2.24.8

-------------------------------------------------------------------
Fri Jun 21 16:55:50 CEST 2013 - jsuchome@suse.cz

- only show desktops for which their defined patterns are known
  (needed when desktop defined in control file is only available
  via some optional installation source - fate#315061)
- 2.24.7

-------------------------------------------------------------------
Wed Jun 19 11:42:59 CEST 2013 - aschnell@suse.de

- make check for sshd more robust (bnc#825160)
- 2.24.6

-------------------------------------------------------------------
Thu Jun  6 08:29:44 UTC 2013 - mfilka@suse.com

- bnc#774301
    - fixed udev events handling in kernel_finish 
- 2.24.5

-------------------------------------------------------------------
Wed Jun  5 13:02:06 UTC 2013 - lslezak@suse.cz

- use WFM::ClientExists() call instead of checking *.ycp file
  presence (works also with non-YCP clients and checks also e.g.
  /y2update/clients path)

-------------------------------------------------------------------
Mon May 27 15:27:12 CEST 2013 - locilka@suse.com

- Using unique IDs while calling rpmcopy_secondstage to prevent
  from disabling this step in AutoYaST or Upgrade while it should
  be disabled only in Installation (bnc#813072).

-------------------------------------------------------------------
Mon May 13 09:40:15 CEST 2013 - jsuchome@suse.cz

- startup scripts: if RC_LANG is not set, use en_US as default
  (bnc#815265)
- 2.24.4

-------------------------------------------------------------------
Fri May 03 12:18:43 CEST 2013 - aschnell@suse.de

- call unicode_start/stop and initviocons only on consoles
  (bnc#800790)
- fixed check for missing initviocons
- 2.24.3

-------------------------------------------------------------------
Mon Apr 22 14:59:35 CEST 2013 - jsuchome@suse.cz

- show dialog for all available disk controlers (bnc#807026)
- 2.24.2

-------------------------------------------------------------------
Wed Apr 17 14:50:48 CEST 2013 - jsuchome@suse.cz

- force disk activation when Storage reports no disk was found
  (bnc#810823) 
- 2.24.1

-------------------------------------------------------------------
Fri Mar 29 11:58:02 CET 2013 - jsuchome@suse.cz

- always return boolean from DeployTarImage (bnc#804293)
- make the "Check drivers" error message depend on control.xml
  variable (fate#312875, bnc#805251) 
- 2.24.0

-------------------------------------------------------------------
Wed Mar 13 12:35:54 UTC 2013 - mfilka@suse.com

- NetworkManager is enabled and active after second stage (bnc#808039)
- 2.23.13

-------------------------------------------------------------------
Mon Mar 04 14:42:03 CET 2013 - aschnell@suse.de

- deactivate RAID before going back to "Disk Activation" during
  installation (bnc#806454)

-------------------------------------------------------------------
Thu Feb 14 17:06:53 CET 2013 - fehr@suse.de

- fix got_kernel_param in misc.sh to not match substrings (so far 
  kernel parameters like systemd.log_level=debug activated Y2DEBUG)
- 2.23.12
 
-------------------------------------------------------------------
Wed Jan 23 16:00:21 CET 2013 - jsuchome@suse.cz

- prevent systemctl hang in 2nd stage (from fcrozat@suse.com,
  bnc#798620)
- 2.23.11

-------------------------------------------------------------------
Sun Jan 20 15:27:33 UTC 2013 - lslezak@suse.cz

- start the add-on module also when "addon" boot parameter is
  present (fate#314318)
- 2.23.10

-------------------------------------------------------------------
Mon Jan 14 13:45:23 UTC 2013 - locilka@suse.com

- Adding repositories that cannot be (re)added as enabled in
  a disabled state (bnc#779396).
- 2.23.9

-------------------------------------------------------------------
Fri Jan 11 10:47:11 CET 2013 - jsuchome@suse.cz

- adapted to changes in Storage.ycp API (bnc#797245)
- 2.23.8

-------------------------------------------------------------------
Mon Jan  7 13:06:32 CET 2013 - jsuchome@suse.cz

- set new keyboard layout right after selecting (bnc#796589)
- added SYSTEMCTL_OPTIONS to Firstboot/Second Stage services
  (bnc#791076)
- 2.23.7

-------------------------------------------------------------------
Fri Dec 21 08:23:47 CET 2012 - jsuchome@suse.cz

- show the info about possibility to download drivers
  from drivers.suse.com (fate#312875) 
- added KVM installation scenario (bnc#795067)
- 2.23.6

-------------------------------------------------------------------
Fri Dec 14 15:16:52 CET 2012 - jsuchome@suse.cz

- disable USB sources after installation (bnc#793709) 
- 2.23.5

-------------------------------------------------------------------
Tue Dec  4 16:54:56 CET 2012 - jsuchome@suse.cz

- allow using local repositories during update (bnc#779397)
- 2.23.4

-------------------------------------------------------------------
Mon Nov  5 08:21:41 CET 2012 - jsuchome@suse.cz

- fixed installation of systemd units (crrodriguez)
- 2.23.3

-------------------------------------------------------------------
Wed Oct 31 08:16:46 CET 2012 - jsuchome@suse.cz

- removed fonts_finish, its only action was to call obsolete
  SuSEconfig script
- removed inst_suseconfig client (fate#100011)
- 2.23.2

-------------------------------------------------------------------
Fri Oct 26 08:44:43 CEST 2012 - jsuchome@suse.cz

- do not allow to go next without desktop selected (bnc#786507)
- 2.23.1

-------------------------------------------------------------------
Wed Oct 24 11:12:55 CEST 2012 - jsuchome@suse.cz

- removed suseconfig step from installation sequence (fate#100011)
- 2.23.0

-------------------------------------------------------------------
Wed Jul 11 15:56:38 CEST 2012 - jsuchome@suse.cz

- create simpler and non translated aliases for update sources 
  (bnc#768624)
- 2.22.10

-------------------------------------------------------------------
Thu Jun 28 14:36:08 CEST 2012 - jsuchome@suse.cz

- set TERM=linux for 2nd stage services, to keep ncurses nice
  (bnc#768356)
- 2.22.9

-------------------------------------------------------------------
Mon Jun 25 15:43:43 CEST 2012 - jsuchome@suse.cz

- ensure Plymouth is hiddent before 2nd start, to prevent system
  freeze (bnc#768185)
- ensure 2nd stage is started before SuSEfirewall2_init (bnc#733361)
- 2.22.8

-------------------------------------------------------------------
Tue Jun 19 14:49:52 CEST 2012 - aschnell@suse.de

- kill console before reboot (bnc#759627)
  (otherwise systemd will not proceed with system shutdown)

-------------------------------------------------------------------
Wed Jun  6 11:27:02 CEST 2012 - jsuchome@suse.cz

- require yast2-proxy for 2nd stage (bnc#764951)
- show a message if network config has failed (bnc#765129)
- 2.22.7

-------------------------------------------------------------------
Tue Apr 17 16:03:55 CEST 2012 - jsuchome@suse.cz

- enhanced image installation help text (bnc#732914)

-------------------------------------------------------------------
Tue Apr 03 14:56:55 CEST 2012 - aschnell@suse.de

- adapted to move of testX (see bnc#749184)
- 2.22.6

-------------------------------------------------------------------
Wed Mar 14 15:42:19 CET 2012 - aschnell@suse.de

- create link yast.ssh for 2nd stage ssh installation (bnc#745340)
- 2.22.5

-------------------------------------------------------------------
Wed Feb 15 11:46:45 CET 2012 - gs@suse.de

- Improve layout of the release notes dialog (bnc #550610)
- 2.22.4

-------------------------------------------------------------------
Thu Feb  9 10:53:01 CET 2012 - jsuchome@suse.cz

- adapt the style only for ssh installation, not vnc (bnc#742777)
- 2.22.3

-------------------------------------------------------------------
Tue Feb  7 17:22:46 CET 2012 - tgoettlicher@suse.de

- Fixed bnc #742777: ssh installation needs to much bandwidth
- 2.22.2

-------------------------------------------------------------------
Fri Jan 13 11:02:40 CET 2012 - jsuchome@suse.cz

- confirmed license
- 2.22.1

-------------------------------------------------------------------
Mon Jan  9 14:29:34 CET 2012 - locilka@suse.cz

- save ecdsa keys as well (bnc#726468) (added where missing)

-------------------------------------------------------------------
Mon Jan  9 13:39:10 CET 2012 - locilka@suse.cz

- Added ntp-client into list of cloned modules in control file
  (bnc #738019).

-------------------------------------------------------------------
Wed Jan  4 15:21:30 CET 2012 - locilka@suse.cz

- Reading the current random/poolsize from /proc to store the exact
  number of bytes (bnc#692799).

-------------------------------------------------------------------
Tue Jan  3 16:21:42 CET 2012 - locilka@suse.cz

- Modified saving state of the current randomness (bnc#692799).

-------------------------------------------------------------------
Thu Dec  8 16:45:15 CET 2011 - locilka@suse.cz

- Fixed saving state of the current randomness (bnc#692799).

-------------------------------------------------------------------
Fri Nov 25 11:35:04 CET 2011 - jsuchome@suse.cz

- ask for Abort confirmation in Update URLs step (bnc#728907)

-------------------------------------------------------------------
Wed Nov 16 13:18:40 CET 2011 - jsuchome@suse.cz

- merged texts from proofreading
- 2.22.0

-------------------------------------------------------------------
Thu Nov 10 14:27:55 UTC 2011 - fcrozat@suse.com

- Disable routing initscript commands through systemd, prevent
  lockups.

-------------------------------------------------------------------
Thu Nov 03 11:52:08 CET 2011 - aschnell@suse.de

- use same code to display ip addresses during vnc and ssh
  installation (bnc#727802)
- 2.21.28

-------------------------------------------------------------------
Wed Nov  2 17:14:51 CET 2011 - fcrozat@suse.com

- Ensure network is not started by systemd before Firstboot /
  SecondStage (bnc#726823)
- 2.21.27

-------------------------------------------------------------------
Mon Oct 31 09:18:46 CET 2011 - jsuchome@suse.cz

- control files: save ecdsa keys (bnc#726468)
- 2.21.26

-------------------------------------------------------------------
Wed Oct 19 16:25:41 CEST 2011 - locilka@suse.cz

- Creating /etc/mtab linking to /proc/self/mounts in umount_finish
  (bnc#725166)
- 2.21.25

-------------------------------------------------------------------
Fri Oct 14 11:27:58 CEST 2011 - fcrozat@suse.com

- Fix text mode handled in systemd (bnc#724115)
- 2.21.24

-------------------------------------------------------------------
Tue Oct 11 08:52:43 CEST 2011 - jsuchome@suse.cz

- compress the log file from 1st stage of installation (bnc#716938)
- 2.21.23

-------------------------------------------------------------------
Fri Oct  7 11:38:39 UTC 2011 - fcrozat@suse.com

- Use latest macros for systemd
- Drop workaround for bnc#719221, systemd is fixed now.
- 2.21.22

-------------------------------------------------------------------
Fri Oct  7 11:30:21 UTC 2011 - jsrain@suse.cz

- change the URL for congratulation dialog (bnc#720481)

-------------------------------------------------------------------
Mon Sep 26 10:41:38 CEST 2011 - jsuchome@suse.cz

- control.openSUSE: use lightdm as default DM for Xfce 
- 2.21.21

-------------------------------------------------------------------
Fri Sep 23 15:36:11 CEST 2011 - jsuchome@suse.cz

- updated systemd service files (bnc#719221)
- 2.21.20

-------------------------------------------------------------------
Fri Sep 23 14:27:36 CEST 2011 - jsuchome@suse.cz

- unmount previously mounted /run (bnc#717321)
- 2.21.19

-------------------------------------------------------------------
Thu Sep 15 12:16:49 UTC 2011 - lslezak@suse.cz

- improved package update check - display only the repositories
  with an update available, display package updates in details
- 2.21.18

-------------------------------------------------------------------
Tue Sep  6 10:05:00 CEST 2011 - jsuchome@suse.cz

- enable system cloning only when autoyast2 is installed
  (bnc#692790)
- 2.21.17

-------------------------------------------------------------------
Wed Aug 31 14:33:50 CEST 2011 - jsuchome@suse.cz

- fix build for older distributions
- 2.21.16

-------------------------------------------------------------------
Mon Aug 29 12:12:55 CEST 2011 - jsuchome@suse.cz

- added systemd .service files for second stage and firstboot
  (from fcrozat@suse.com, bnc#713760)
- 2.21.15

-------------------------------------------------------------------
Fri Aug 12 13:58:01 CEST 2011 - jsuchome@suse.cz

- expect there might me extra checks for disk controllers with
  s390 (bnc#706911)
- adapted help text and label in installation mode selection
  (bnc#711160)
- 2.21.14

-------------------------------------------------------------------
Fri Aug  5 12:13:13 UTC 2011 - lslezak@suse.cz

- upgrade_urls.ycp - do not display reading and writing progress,
  it is pretty quick and just causes screen flickering
  (the write progress is displayed only when there is an enabled
  repo to add, refreshing it can take long time) (bnc#692614)
- 2.21.13

-------------------------------------------------------------------
Fri Aug  5 12:32:16 CEST 2011 - tgoettlicher@suse.de

- fixed .desktop file (bnc #681249)

-------------------------------------------------------------------
Thu Aug  4 14:50:33 UTC 2011 - lslezak@suse.cz

- 2.21.12

-------------------------------------------------------------------
Thu Aug  4 14:07:38 CEST 2011 - mvidner@suse.cz

- Copy network interface naming rules early to get them to initrd (bnc#666079).

-------------------------------------------------------------------
Thu Aug  4 11:37:02 UTC 2011 - lslezak@suse.cz

- extraurls: check whether there is an update candidate in the
  added extra repositories - openSUSE DVD does not contain all
  packages, packages from OSS repository which are not on DVD
  medium were not upgraded and were left in the old version even
  after adding new OSS repository with updated version (bnc#693230)

-------------------------------------------------------------------
Wed Aug  3 13:19:50 UTC 2011 - lslezak@suse.cz

- cleanup: removed obsoleted SourceManager::SyncAddedAndDeleted()
  call (zmd sync has been removed)
- 2.21.11

-------------------------------------------------------------------
Wed Aug  3 08:53:14 UTC 2011 - lslezak@suse.cz

- use term "Software manager" instead of "Package manager"
  (bnc#585679)
- 2.21.10

-------------------------------------------------------------------
Tue Aug  2 13:37:03 CEST 2011 - locilka@suse.cz

- Preserving the /dev/urandom state from inst-sys after the
  installation (bnc#692799)
- Automatically enabling haveged service if installed (bnc#692799)
- 2.21.9

-------------------------------------------------------------------
Mon Aug  1 15:38:32 CEST 2011 - locilka@suse.cz

- Added control.SLES-for-VMware into the SVN

-------------------------------------------------------------------
Fri Jul 22 15:00:30 CEST 2011 - locilka@suse.cz

- Removed obsoleted X-KDE-SubstituteUID from deploy_image.desktop
  (bnc#540627)
- 2.21.8

-------------------------------------------------------------------
Tue Jul 12 15:34:38 CEST 2011 - jsuchome@suse.cz

- Show Xen Virtualization Host Server Installation scenario
  only for x86_64 architecture (bnc#702103)
- 2.21.7

-------------------------------------------------------------------
Thu Jun 30 14:09:17 CEST 2011 - jsuchome@suse.cz

- fixed typos (bnc#703119)
- 2.21.6

-------------------------------------------------------------------
Wed Jun  1 17:24:25 CEST 2011 - locilka@suse.cz

- always loading 'pciehp' kernel module on Dell hardware
  (FATE #311991)
- fixed control file validation
- stricter btrfs_increase_percentage definition in all control
  files (only 'integer' is allowed)

-------------------------------------------------------------------
Wed Jun  1 11:56:08 CEST 2011 - fehr@suse.de

- add btrfs_increase_percentage to to category "partitioning" in
  config.xml files
- 2.21.5

-------------------------------------------------------------------
Thu May 19 14:22:10 CEST 2011 - jsuchome@suse.cz

- enable YaST restart in the 1st stage (bnc#694299)
- 2.21.4

-------------------------------------------------------------------
Wed Apr 27 15:08:04 CEST 2011 - jsuchome@suse.cz

- added option to configure FCoE Interfaces when started with
  WithFCoE=1 argument (fate#307445)
- 2.21.3

-------------------------------------------------------------------
Wed Apr 27 11:19:50 CEST 2011 - jsuchome@suse.cz

- Copy /media.1/build to the installed system (fate#311377)
- 2.21.2

-------------------------------------------------------------------
Fri Mar 25 10:26:44 CET 2011 - jsuchome@suse.cz

- show the 'before-reboot' message in RichText, so possible command
  can be copy-pasted (bnc#383519)
- 2.21.1

-------------------------------------------------------------------
Thu Mar 24 16:14:02 CET 2011 - jsuchome@suse.cz

- do not start automatic configuration for autoYaST (bnc#679435)
- 2.21.0

-------------------------------------------------------------------
Mon Feb 28 14:52:26 CET 2011 - locilka@suse.cz

- Handling disabled installation steps also in Live Installation
  mode (BNC #675516)
- 2.20.6

-------------------------------------------------------------------
Thu Feb 17 13:49:19 CET 2011 - aschnell@suse.de

- fixed braille support during installation (bnc #672086)
- 2.20.5

-------------------------------------------------------------------
Tue Feb  8 15:10:25 CET 2011 - locilka@suse.cz

- Adapted openSUSE control file to the current naming schema of
  desktops (BNC #667408)

-------------------------------------------------------------------
Thu Jan 20 14:18:41 CET 2011 - jsrain@suse.cz

- fix initialization of AutoUpgrade for 2nd stage
- 2.20.4

-------------------------------------------------------------------
Wed Jan 19 15:38:20 CET 2011 - jsrain@suse.cz

- adaptations for unattended migration (fate#310481)
- don't delete /etc/mtab if it is a symlink (bnc#665437)
- 2.20.3

-------------------------------------------------------------------
Wed Jan 19 12:53:00 CET 2011 - jsrain@suse.cz

- fixed progress during live installation (bnc#665413)
- 2.20.2

-------------------------------------------------------------------
Fri Jan  7 13:43:01 CET 2011 - jsrain@suse.cz

- update XFCE desktop definition

-------------------------------------------------------------------
Thu Jan  6 10:47:00 CET 2011 - locilka@suse.cz

- Using wider space for licence displayed in non-textual interface
  (BNC #607135).
- Fixed DUD deployment (BNC #626337)

-------------------------------------------------------------------
Thu Nov 16 16:13:48 UTC 2010 - jsrain@suse.cz

- fixed behavior of window closing in installation proposal
  (bnc#636980)
- use df for estimating partition size for live installer
  (bnc#555288)
- 2.20.1

-------------------------------------------------------------------
Thu Sep 30 17:33:48 UTC 2010 - lslezak@suse.cz

- don't use spaces in repo alias (bnc#596950)
- inst_addon_update_sources.ycp - removed obsoleted ZMD sync call
- 2.20.0

-------------------------------------------------------------------
Wed Jun  2 13:52:02 CEST 2010 - jsrain@suse.cz

- removed link to repairing the system
- 2.19.20

-------------------------------------------------------------------
Wed May 12 15:33:24 CEST 2010 - ug@suse.de

- fixed the cloning at the end of a manual
  installation (bnc#605132)
- 2.19.7

-------------------------------------------------------------------
Mon Apr 19 12:29:08 CEST 2010 - aschnell@suse.de

- allow btrfs as root fs
- 2.19.6

-------------------------------------------------------------------
Thu Apr 15 17:12:28 CEST 2010 - locilka@suse.cz

- Script copy_files_finish copies files with --dereference to
  prevent from copying symlinks instead of the files content
  (BNC #596938).

-------------------------------------------------------------------
Fri Apr 09 17:09:27 CEST 2010 - aschnell@suse.de

- disable Qt/Gtk frontend if testX is unavailable (bnc #585432)
- 2.19.5

-------------------------------------------------------------------
Tue Apr  6 17:44:25 CEST 2010 - locilka@suse.cz

- Searching for LiveCD license in /usr/share/doc/licenses and /
  directories (BNC #594042).

-------------------------------------------------------------------
Fri Mar 26 11:26:04 CET 2010 - ug@suse.de

- fixed a broken yast2-installation.spec.in
- fixed broken schema validation files for control.xml files
- 2.19.4

-------------------------------------------------------------------
Wed Mar 24 07:42:19 UTC 2010 - lslezak@suse.cz

- inst_suseconfig.ycp - do not reset UI product name
  (&product; macro) (bnc#539906)

-------------------------------------------------------------------
Thu Mar 18 14:55:20 CET 2010 - locilka@suse.cz

- Previously used repositories switched from enabled/disabled mode
  to removed/enabled/disabled mode (BNC #588659).

-------------------------------------------------------------------
Fri Mar 12 13:19:15 CET 2010 - kmachalkova@suse.cz

- Port from SLE11 SP1: process files in _datadir/autoinstall/modules 
  with %suse_update_desktop_file. This passes their strings into
  translation (bnc#549944)

-------------------------------------------------------------------
Fri Mar 12 10:53:55 CET 2010 - locilka@suse.cz

- Unique identification in inst_upgrade_urls switched from URL to
  ALIAS (BNC #587517).
- In case of re-adding CD/DVD media, user is asked to insert
  correct media before adding it (BNC #587517).
- Only upgrade packages if upgrading from SLES 11, otherwise use
  patterns for upgrade (BNC #587544).

-------------------------------------------------------------------
Tue Mar  9 15:35:48 CET 2010 - locilka@suse.cz

- Fixed calling update.post from DUD (BNC #586609).

-------------------------------------------------------------------
Tue Mar  2 14:30:31 CET 2010 - locilka@suse.cz

- CIM service is proposed as disabled by default (BNC #584524).

-------------------------------------------------------------------
Mon Feb 22 17:48:57 CET 2010 - locilka@suse.cz

- Documented YaST RELAX NG schema (FATE #305551).
- Correctly re-added unique_id to RNC - AC steps and proposals
  (BNC #582094).

-------------------------------------------------------------------
Wed Feb 17 11:05:12 CET 2010 - ug@suse.de

- clone checkbox at the end of the installation is always
  enabled now and can install the autoyast2 package if needed
  (bnc#547486)

-------------------------------------------------------------------
Mon Feb 15 15:48:51 CET 2010 - ug@suse.de

- UI for autoinstallation images added to deploy_image_auto

-------------------------------------------------------------------
Tue Feb  9 17:06:15 CET 2010 - locilka@suse.cz

- Steps 'user' and 'auth' enabled again in Live mode (BNC #547931).

-------------------------------------------------------------------
Tue Feb  9 14:49:33 CET 2010 - locilka@suse.cz

- Fixed license agreement check box visibility (BNC #571846).
- 2.19.3

-------------------------------------------------------------------
Tue Feb  2 11:03:04 CET 2010 - locilka@suse.cz

- Added LXDE to openSUSE control file (FATE #307729).

-------------------------------------------------------------------
Mon Feb  1 11:35:15 CET 2010 - locilka@suse.cz

- Fixed 'going back' from services proposal BNC #572734.

-------------------------------------------------------------------
Fri Jan 22 15:56:07 CET 2010 - aschnell@suse.de

- fixed message during ssh installation (bnc #518616)

-------------------------------------------------------------------
Fri Jan 15 17:29:45 CET 2010 - aschnell@suse.de

- updated control.rnc
- 2.19.2

-------------------------------------------------------------------
Thu Jan  7 15:29:13 CET 2010 - jsuchome@suse.cz

- inst_complex_welcome adapted to Language::SwitchToEnglishIfNeeded
  (bnc#479529)
- 2.19.1

-------------------------------------------------------------------
Fri Dec 11 16:48:58 CET 2009 - locilka@suse.cz

- Adapted for new API to ProductLicense (FATE #306295).

-------------------------------------------------------------------
Wed Dec  9 16:44:34 CET 2009 - locilka@suse.cz

- Package kde4-kdm has been renamed to kdm (SLES, SLED control
  files) (bnc #561627).

-------------------------------------------------------------------
Wed Dec  9 14:58:38 CET 2009 - kmachalkova@suse.cz

- Un-check automatic configuration box when user selects update
  (bnc#537625)

-------------------------------------------------------------------
Wed Dec  9 14:12:21 CET 2009 - locilka@suse.cz

- Enabled CIM by default (SLES and SLED) (FATE #305583)
- Adapted RNC for control files

-------------------------------------------------------------------
Wed Dec  9 12:49:08 CET 2009 - jsrain@suse.cz

- dereference hardlinks when deploying live CD so that it can
  be also deployed on multiple separate partitions (bnc#549158)

-------------------------------------------------------------------
Mon Nov 30 14:38:26 CET 2009 - locilka@suse.cz

- Repositories added by inst_addon_update_sources use
  Pkg::RepositoryAdd that does not need access to network
  (bnc #557723)

-------------------------------------------------------------------
Tue Nov 24 16:13:31 CET 2009 - kmachalkova@suse.cz

Cumulative patch with SLE11 SP1 features:
- In TUI (ncurses), use plain text (.txt) file with release notes, 
  if found (FaTE#306167)
- Set /etc/sysconfig/boot:RUN_PARALLEL according to corresponding
  value in control file (FaTE#307555) 
- 2.19.0

-------------------------------------------------------------------
Thu Nov 19 16:51:55 CET 2009 - locilka@suse.cz

- Added control file configuration option require_registration
  (FATE #305578).

-------------------------------------------------------------------
Wed Nov  4 16:31:17 CET 2009 - mzugec@suse.cz

- lan module in 1st stage (FaTE#303069)
- 2.18.34

-------------------------------------------------------------------
Fri Oct 23 07:40:56 CEST 2009 - jsuchome@suse.cz

- during update, do not save timezone and console settings
  (bnc#547587)
- 2.18.33

-------------------------------------------------------------------
Fri Oct 16 14:36:11 CEST 2009 - locilka@suse.cz

- Fixed handling repositories during upgrade (bnc #543468).
- 2.18.32

-------------------------------------------------------------------
Wed Oct  7 15:36:44 CEST 2009 - jsuchome@suse.cz

- set the time after chroot (bnc#538357)
- 2.18.31

-------------------------------------------------------------------
Wed Oct  7 12:17:52 CEST 2009 - jsuchome@suse.cz

- correctly set the keyboard layout in 2nd stage (bnc#542009)
- 2.18.30

-------------------------------------------------------------------
Thu Oct  1 13:27:16 CEST 2009 - locilka@suse.cz

- Adjusting understandable name for update URLs added during second
  stage of installation (bnc #542792).
- 2.18.29

-------------------------------------------------------------------
Tue Sep 29 16:41:32 CEST 2009 - kmachalkova@suse.cz

- Correct HTML format tags in helptext (bnc#540784)
- Set firewall status according to user's choice also in non-automatic 
  2nd stage (missing call for AdjustDisabledSubProposals) (bnc#534862)
- 2.18.28

-------------------------------------------------------------------
Thu Sep 24 15:51:15 CEST 2009 - kmachalkova@suse.cz

- Enable SSH service after reboot if this is SSH or VNC installation 
  (new ssh_service_finish client) (bnc#535206)
- 2.18.27

-------------------------------------------------------------------
Mon Sep 14 15:27:19 CEST 2009 - jsrain@suse.cz

- enhanced display of release notes (fate#306237)
- 2.18.26

-------------------------------------------------------------------
Wed Sep  9 14:33:14 CEST 2009 - jsrain@suse.cz

- better error handling for image installation (bnc#533601)
- 2.18.25

-------------------------------------------------------------------
Fri Sep  4 19:00:27 CEST 2009 - kmachalkova@suse.cz

- Introducing unique IDs to unambiguously identify AC steps and 
  sub-proposals
- Writing disabled AC steps and subproposals at the end of 1st 
  stage, reading them back at the end of 2nd stage
- Filtering out disabled AC steps from AC workflow (FaTE #303859 and 
  bnc#534862)
- Require new yast2 base 
- 2.18.24

-------------------------------------------------------------------
Fri Sep  4 09:07:42 CEST 2009 - locilka@suse.cz

- Dropped unnecessary fallback text from the fallback control file
  (BNC #536288).

-------------------------------------------------------------------
Wed Aug 26 15:33:51 CEST 2009 - locilka@suse.cz

- Do not copy xorg.conf to installed system anymore (bnc #441404).
- 2.18.23

-------------------------------------------------------------------
Fri Aug 21 12:38:42 CEST 2009 - aschnell@suse.de

- do not disable qt/gtk frontends if xorg.conf is missing (bnc
  #533159)
- 2.18.22

-------------------------------------------------------------------
Fri Aug 14 18:26:49 CEST 2009 - kmachalkova@suse.cz

- Simple network (firewall) configuration in 1st stage (FaTE #303859)

-------------------------------------------------------------------
Mon Aug 10 14:18:11 CEST 2009 - locilka@suse.cz

- added calling bootloader client bootloader_preupdate to control
  file to fix multiple grub entries (bnc #414490, bnc #477778).

-------------------------------------------------------------------
Thu Jul 30 20:26:30 CEST 2009 - jdsn@suse.de

- disable yast2-x11 during installation (bnc#441404) 
- 2.18.21

-------------------------------------------------------------------
Thu Jul 30 15:32:37 CEST 2009 - jsuchome@suse.cz

- adapted to changes in yast2-country: no saving of xorg.conf
  (bnc#441404) 
- 2.18.20

-------------------------------------------------------------------
Wed Jun 24 10:02:20 CEST 2009 - locilka@suse.cz

- Fixed Welcome dialog layout to have more license content visible
  and to align language and keyboard widgets with it.
- Not offering installation images if there are none (bnc #492745).
- 2.18.19

-------------------------------------------------------------------
Mon Jun 22 20:20:18 CEST 2009 - coolo@novell.com

- fix build with automake 1.11
- 2.18.18

-------------------------------------------------------------------
Thu Jun 11 12:57:14 CEST 2009 - jsrain@suse.cz

- adapted for unified progress during live installation
  (bnc#435680)
- 2.18.17

-------------------------------------------------------------------
Mon Jun 08 14:03:30 CEST 2009 - aschnell@suse.de

- use minimalistic xorg.conf during installation (bnc #510015)
- 2.18.16

-------------------------------------------------------------------
Wed May 20 12:45:47 CEST 2009 - aschnell@suse.de

- moved .proc.mounts agent from yast2-installation to yast2 (bnc
  #504429)

-------------------------------------------------------------------
Mon May 18 16:46:03 CEST 2009 - juhliarik@suse.cz

- added kdump support for autoyast installation (FATE#305588)

-------------------------------------------------------------------
Thu May 14 13:45:08 CEST 2009 - locilka@suse.cz

- Installation/Upgrade newly require some packages essential for
  them to succeed (bnc #469730).

-------------------------------------------------------------------
Mon Apr 27 10:22:24 CEST 2009 - locilka@suse.cz

- Using a new yast-spanner (old yast icon) for Repair.
- 2.18.14

-------------------------------------------------------------------
Mon Apr 20 13:59:31 CEST 2009 - locilka@suse.cz

- Fixed Vendor module to use zypp history file instead of using
  y2logRPM (bnc #456446).
- 2.18.13

-------------------------------------------------------------------
Thu Apr 16 16:58:07 CEST 2009 - locilka@suse.cz

- Added documentation for installation images.

-------------------------------------------------------------------
Fri Apr 10 14:11:46 CEST 2009 - locilka@suse.cz

- KDE 3.x dropped from openSUSE control file (bnc #493547).

-------------------------------------------------------------------
Tue Apr  7 13:02:39 CEST 2009 - ug@suse.de

- changed the error message of missing hard disks during
  autoinstallation. Might confuse s390/iSCSI users. (bnc#476147)

-------------------------------------------------------------------
Mon Mar 30 14:20:57 CEST 2009 - locilka@suse.cz

- Fixing reevaluation of packages to remove, install and/or upgrade
  after images are deployed during first stage (bnc #489448).
- 2.18.12

-------------------------------------------------------------------
Fri Mar 27 18:15:15 CET 2009 - locilka@suse.cz

- Added new globals->ac_redraw_and_ignore control file item
  (openSUSE and SLED) that ignores if AC UI is missing and just
  redraws it. An error is still reported in case of missing Wizard
  widget (bnc #487565).

-------------------------------------------------------------------
Thu Mar 19 14:14:34 CET 2009 - locilka@suse.cz

- Continuing on Repair integration.
- Handling missing FLAGS in the content file.
- 2.18.11

-------------------------------------------------------------------
Wed Mar 18 13:17:58 CET 2009 - locilka@suse.cz

- Location /etc/modprobe.d/blacklist has been renamed to
  /etc/modprobe.d/50-blacklist.conf (bnc #485980).
- Unified inst_mode handling, especially correct handling of
  Automatic Configuration together with switching to Update mode
  (originally reported as bnc #469273).
- Repair workflow unified with the rest of installation.
- 2.18.10

-------------------------------------------------------------------
Mon Mar 16 14:47:46 CET 2009 - locilka@suse.cz

- Fixed help for "License Translations..." button (bnc #481113).

-------------------------------------------------------------------
Tue Mar 10 10:26:02 CET 2009 - locilka@suse.cz

- Obsolete 'tar --preserve' replaced with
  'tar --preserve-permissions --preserve-order' (bnc #483791).
- Added recovery support for AC (dialogs) possibly called by AC
  scripts (bnc #483211).

-------------------------------------------------------------------
Thu Feb 26 16:00:44 CET 2009 - ug@suse.de

- RPMs via driverupdate were not possible

-------------------------------------------------------------------
Tue Feb 24 13:30:15 CET 2009 - locilka@suse.cz

- Added support for .xz images deployment (bnc #476079).
- Added support for `reboot_same_step (bnc #475650).
- 2.18.9

-------------------------------------------------------------------
Mon Feb 23 16:36:56 CET 2009 - locilka@suse.cz

- Offering to configure network if remote repositories are used
  during upgrade (inst_upgrade_urls). Setup can be safely skipped
  and comes from the Online Repositories (bnc #478024).
- 2.18.8

-------------------------------------------------------------------
Fri Feb 20 20:40:09 CET 2009 - locilka@suse.cz

- save network configuration also for IPv6 only (bnc#477917)
- 2.18.7

-------------------------------------------------------------------
Tue Feb 17 16:56:09 CET 2009 - locilka@suse.cz

- Writing additional-control-files index file after removing and
  recreating the directory where it is stored (bnc #475516).
- 2.18.6

-------------------------------------------------------------------
Mon Feb  9 13:21:50 CET 2009 - locilka@suse.cz

- Enabling online update in (SLED) Automatic Configuration
  (bnc #449128).

-------------------------------------------------------------------
Fri Feb  6 10:39:20 CET 2009 - locilka@suse.cz

- InstError has been moved to yast2-2.18.6
- 2.18.5

-------------------------------------------------------------------
Thu Feb  5 18:16:17 CET 2009 - locilka@suse.cz

- InstError extended and documented.

-------------------------------------------------------------------
Mon Feb  2 13:09:08 CET 2009 - locilka@suse.cz

- Erasing all old additional control files in the final step of
  upgrade before rebooting to the second stage (bnc #471454).
- InstError can now save YaST logs on user request.
- 2.18.4

-------------------------------------------------------------------
Wed Jan 28 14:33:09 CET 2009 - locilka@suse.cz

- Added new InstError module for unified reporting of errors
  during installation.
- Better SlideShow support in inst_finish.
- Reporting more errors in inst_finish.
- 2.18.3

-------------------------------------------------------------------
Tue Jan 27 17:13:57 CET 2009 - locilka@suse.cz

- Added test for checking free space when SCR switch fails
  (bnc #460477).

-------------------------------------------------------------------
Mon Jan 26 13:58:00 CET 2009 - locilka@suse.cz

- Disabling [Back] buttons in the very first interactive dialogs
  in second stage, SLES and SLED control files (bnc #468677).

-------------------------------------------------------------------
Thu Jan 22 12:50:38 CET 2009 - locilka@suse.cz

- Dropping mode_proposal client - not in use anymore.
- 2.18.2

-------------------------------------------------------------------
Wed Jan 21 13:09:33 CET 2009 - locilka@suse.cz

- Removing dependency on yast2-runlevel (duplicate code in runlevel
  proposal).
- Removing dependency on yast2-mouse by moving the mouse-related
  scripts to yast2-mouse-2.18.0.
- Removing dependency on yast2-bootloader.
- inst_finish script newly uses the SlideShow module.

-------------------------------------------------------------------
Tue Jan 20 13:37:03 CET 2009 - locilka@suse.cz

- Possibility to move the base installation window has been
  disabled (bnc #466827)
- 2.18.1

-------------------------------------------------------------------
Tue Jan 13 12:15:42 CET 2009 - locilka@suse.cz

- Adapted the inst_proposal to better reflect the current situation
  'analyzing...' vs. 'adapting the proposal...' (bnc #463567).

-------------------------------------------------------------------
Fri Dec 19 13:07:49 CET 2008 - locilka@suse.cz

- Pattern WBEM added into two server scenarios (bnc #458332).

-------------------------------------------------------------------
Thu Dec 18 18:04:47 CET 2008 - locilka@suse.cz

- Updated control file documentation (bnc #438678).

-------------------------------------------------------------------
Wed Dec 17 14:42:22 CET 2008 - locilka@suse.cz

- Added yet another xset call (bnc #455771 comment #40)

-------------------------------------------------------------------
Tue Dec 16 17:13:38 CET 2008 - aschnell@suse.de

- adapted to storage API changes
- 2.18.0

-------------------------------------------------------------------
Tue Dec 16 12:29:27 CET 2008 - locilka@suse.cz

- Removed SLED control file labels that should be hidden
  (bnc #459080).
- Using a better help text for inst_new_desktop (bnc #432912).

-------------------------------------------------------------------
Mon Dec 15 14:32:27 CET 2008 - locilka@suse.cz

- Removed all (inst_)do_rezise calls from all control files on
  aschnell's request.

-------------------------------------------------------------------
Fri Dec 12 16:36:28 CET 2008 - aschnell@suse.de

- require initviocons (bnc #173426)
- 2.17.47

-------------------------------------------------------------------
Tue Dec  9 16:40:35 CET 2008 - locilka@suse.cz

- Updated control.rnc
- 2.17.46

-------------------------------------------------------------------
Mon Dec  8 13:16:33 CET 2008 - locilka@suse.cz

- Updated control.rnc
- Added two more control-file examples.
- Checking all control files during build.
- Adjusted control-file examples (all bnc #438678).
- Checking the process exit status returned after deploying an
  image (bnc #456337).
- 2.17.45

-------------------------------------------------------------------
Fri Dec  5 10:38:41 CET 2008 - locilka@suse.cz

- New control.rnc/rng for control file validation (bnc #455994).
- Added build-time control file validation.
- 2.17.44

-------------------------------------------------------------------
Wed Dec  3 18:33:59 CET 2008 - locilka@suse.cz

- inst_extrasources moved before inst_ask_online_update to register
  the online update repository before checking for patches
  (bnc #450229).

-------------------------------------------------------------------
Mon Dec  1 16:59:14 CET 2008 - locilka@suse.cz

- Fixed proposing the online update depending on the fact whether
  network is running (bnc #450229).
- 2.17.43

-------------------------------------------------------------------
Fri Nov 28 15:05:02 CET 2008 - locilka@suse.cz

- Updated labels of Installation Scenarios for SLES (bnc #428202).

-------------------------------------------------------------------
Fri Nov 28 12:16:03 CET 2008 - locilka@suse.cz

- Fixed behavior of inst_new_desktop when user switched to another
  language later (bnc #449818).
- 2.17.42

-------------------------------------------------------------------
Thu Nov 27 16:49:11 CET 2008 - locilka@suse.cz

- Using yast-live-install-finish icon when finishing LiveCD
  installation/inst_finish (bnc #438154).
- Fixed ImageInstallation SlideShow - download progress is shown
  only when downloading the images, not the other helper files
  (bnc #449792).
- Adjusting ImageInstallation-related SlideShow only if
  ImageInstallation is in use (bnc #439104).

-------------------------------------------------------------------
Thu Nov 27 15:05:11 CET 2008 - ug@suse.de

- the real fix for bnc#442691
  deploy_image_auto doesn't use the boolean variable 
  image_installation
- 2.17.41

-------------------------------------------------------------------
Tue Nov 25 14:42:31 CET 2008 - locilka@suse.cz

- Handling new feature of licenses ProductLicense::AcceptanceNeeded
  (bnc #448598).
- 2.17.40

-------------------------------------------------------------------
Mon Nov 24 12:51:48 CET 2008 - locilka@suse.cz

- Completely initializing the target and sources before checking
  for available patches and offering online update (bnc #447080).
- 2.17.39

-------------------------------------------------------------------
Thu Nov 20 18:21:32 CET 2008 - locilka@suse.cz

- Pkg::SourceStartManager in inst_ask_online_update to replace
  obsolete Pkg::PkgEstablish (bnc #447080).
- Reading all supported desktops to define the order of desktops
  in desktop_finish (bnc #446640).
- Added shadow desktops to SLES and SLED desktop files to have
  a fallback if user selects some other desktop than the default
  one (bnc #446640).
- 2.17.38

-------------------------------------------------------------------
Wed Nov 19 16:01:53 CET 2008 - locilka@suse.cz

- Added pciutils to Requires, lspci was called but not required
  (bnc #446533).
- 2.17.37

-------------------------------------------------------------------
Wed Nov 19 13:23:10 CET 2008 - locilka@suse.cz

- Added inst_fallback_controlfile client reporting about using
  a fallback control file.
- Calling inst_fallback_controlfile in the fallback control file
  (both bnc #440982).
- 2.17.36

-------------------------------------------------------------------
Fri Nov 14 12:17:47 CET 2008 - aschnell@suse.de

- don't start iscsid in second stage start scripts (bnc #444976)
- 2.17.35

-------------------------------------------------------------------
Thu Nov 13 17:36:53 CET 2008 - locilka@suse.cz

- Flushing the cache before calling a set_polkit_default_privs that
  uses the written data (bnc #440182).
- 2.17.34

-------------------------------------------------------------------
Thu Nov 13 11:21:11 CET 2008 - locilka@suse.cz

- Handling errors while deploying images, installation will abort
  (bnc #444209).
- 2.17.33

-------------------------------------------------------------------
Thu Nov 13 10:21:13 CET 2008 - ug@suse.de

- checkboxes in the congratulations dialog did not work anymore
  (bnc#444214)

-------------------------------------------------------------------
Tue Nov 11 13:58:17 CET 2008 - ug@suse.de

- fix for image deployment during autoinstallation

-------------------------------------------------------------------
Tue Nov 11 12:20:00 CET 2008 - juhliarik@suse.cz

- changed order of yast modules in Expert tab for installation
  (bnc #441434)

-------------------------------------------------------------------
Tue Nov 11 10:53:25 CET 2008 - jsrain@suse.cz

- fixed switching to a tab with an error in the proposal
  (bnc #441434)
- 2.17.32

-------------------------------------------------------------------
Tue Nov 11 10:48:03 CET 2008 - aschnell@suse.de

- use accelerated xserver during installation for certain Intel
  cards (bnc #442413)
- 2.17.31

-------------------------------------------------------------------
Fri Nov  7 16:32:28 CET 2008 - locilka@suse.cz

- Fixed deploy_image_auto to handle AutoYaST settings correctly
  (bnc #442691).
- Removing the congrats dialog content before cloning, storing
  the sources, finishing (bnc #441452).
- Using Pkg::SourceProvideDigestedFile function when deploying
  images and in release_notes_popup (bnc #409927).
- 2.17.30

-------------------------------------------------------------------
Thu Nov  6 16:35:10 CET 2008 - locilka@suse.cz

- Fixed progress (SlideShow) information about images being
  deployed (bnc #442286).
- Changing inst_deploy_images to use PackagesUI for opening a
  package selector while debugging mode is turned on (bnc #435479).

-------------------------------------------------------------------
Thu Nov  6 16:19:59 CET 2008 - jsuchome@suse.cz

- S09-cleanup: check for additional services requiring restart
  (bnc#395402)

-------------------------------------------------------------------
Wed Nov  5 17:25:01 CET 2008 - locilka@suse.cz

- Calling set_polkit_default_privs without checking for it using
  FileUtils, checking by 'test -x' instead (bnc #440182).
- 2.17.29

-------------------------------------------------------------------
Wed Nov  5 13:09:04 CET 2008 - locilka@suse.cz

- Added yast2-storage >= 2.17.47 because of the previous fix
  implementation.
- 2.17.28

-------------------------------------------------------------------
Tue Nov 04 13:14:10 CET 2008 - aschnell@suse.de

- improved warning about partitioning (fate #302857)
- 2.17.27

-------------------------------------------------------------------
Mon Nov  3 18:34:30 CET 2008 - locilka@suse.cz

- Writing 'SecondStageRequired' 0/1 to /etc/install.inf even while
  rebooting during second stage (bnc #432005).
- 2.17.26

-------------------------------------------------------------------
Mon Nov 03 14:28:14 CET 2008 - aschnell@suse.de

- better reboot message during ssh installation (bnc #439572 and
  bnc #432005)
- 2.17.25

-------------------------------------------------------------------
Fri Oct 31 16:28:23 CET 2008 - locilka@suse.cz

- Fixed checking whether running the second stage is required.
- Added writing 'SecondStageRequired' 0/1 to /etc/install.inf
  (both bnc #439572)
- 2.17.24

-------------------------------------------------------------------
Thu Oct 30 14:42:15 CET 2008 - locilka@suse.cz

- Saving sources at the end of inst_extrasources if some were
  added (bnc #440184).
- 2.17.23

-------------------------------------------------------------------
Mon Oct 27 10:18:47 CET 2008 - locilka@suse.cz

- Added lnussel's patch to run set_polkit_default_privs at
  desktop_finish script (bnc #438698).
- Bigger license window (bnc #438100).
- Calling inst_prepareprogress also during Upgrade, all control
  files changed (bnc #438848).
- Disabling users and auth in LiveCD second stage (bnc #435965).
- Removing label for user_non_interactive (bnc #401319).
- Desktop 'startkde4' replaced with 'startkde' (bnc #438212).
- Added 'kdump' to 'clone_modules' (SLES) (bnc #436365).
- 2.17.22

-------------------------------------------------------------------
Tue Oct 21 16:46:00 CEST 2008 - locilka@suse.cz

- Added handling for globals->debug_deploying (bnc #436842).

-------------------------------------------------------------------
Mon Oct 20 12:56:32 CEST 2008 - locilka@suse.cz

- Fixed a typo (bnc #436471).

-------------------------------------------------------------------
Fri Oct 17 10:51:05 CEST 2008 - locilka@suse.cz

- Adapted SLES and SLED control files to write default desktop
  settings (bnc #436094).
- Added software->display_support_status flag to SLES/SLED
  (bnc #435479).

-------------------------------------------------------------------
Tue Oct 14 14:15:11 CEST 2008 - locilka@suse.cz

- Changed YaST icons while probing the system (bnc #404809).
- Enhanced scr_switch_debugger - Sending USR1 signal to the new SCR
  (bnc #433057).
- 2.17.21

-------------------------------------------------------------------
Mon Oct 13 13:29:04 CEST 2008 - locilka@suse.cz

- Enabled going_back in Add-Ons during installation (bnc #434735).

-------------------------------------------------------------------
Mon Oct 13 13:10:58 CEST 2008 - mzugec@suse.de

- configure supportconfig in installation (fate#305180)
- 2.17.20

-------------------------------------------------------------------
Mon Oct 13 09:45:23 CEST 2008 - locilka@suse.cz

- Fixed install/update confirmation dialog (bnc #433249).
- Fixed text in openSUSE control file (bnc #432911).
- Fixed typo (bnc #433794).

-------------------------------------------------------------------
Fri Oct 10 14:49:58 CEST 2008 - locilka@suse.cz

- Enhanced scr_switch_debugger (bnc #433057).
- Enabling key-repeating if not running in XEN (bnc #433338).

-------------------------------------------------------------------
Thu Oct  9 21:00:01 CEST 2008 - locilka@suse.cz

- Loading the Target while initializing libzypp in
  inst_upgrade_urls (bnc #429080).
- Running a simple SCR Test after chrooting to the installed system
  in scr_switch_finish, full-test is called in case of simple test
  failure (bnc #433057).
- Added more checking around 'searching for files' (bnc #427879).

-------------------------------------------------------------------
Wed Oct 08 12:51:01 CEST 2008 - aschnell@suse.de

- removed cp of proc/mounts to /etc/mtab (bnc #425464)
- 2.17.19

-------------------------------------------------------------------
Mon Oct  6 15:30:53 CEST 2008 - locilka@suse.cz

- Do not display any system type for SLES/SLED in installation
  overview (bnc #431336).
- Clients inst_new_desktop and inst_scenarios converted to use
  PackagesProposal API instead of using Pkg calls directly (bnc
  #432572)
- Dropping obsolete inst_software_selection client instead of
  convwerting it - not in use anymore (bnc #432572).
- Always change initial proposal [Next] button to [Install],
  resp. [Update] (bnc #431567).
- Removing desktop definitions and default_desktop from SLED
  control file, the required patterns are selected by PATTERNS
  in content file already (bnc #431902).
- Adding lnussel's patch for desktop_finish to write
  POLKIT_DEFAULT_PRIVS if defined in globals->polkit_default_privs
  (bnc #431158).
- Adding polkit_default_privs="restrictive" for SLES (bnc #431158).
- 2.17.18

-------------------------------------------------------------------
Fri Oct  3 16:31:10 CEST 2008 - locilka@suse.cz

- Enabling some steps in second stage even if Automatic
  Configuration is in use.
- Feature added into openSUSE and SLED control files
  (both bnc #428190).

-------------------------------------------------------------------
Thu Oct  2 22:00:46 CEST 2008 - mzugec@suse.de

- changed Release Notes into Support group (bnc#430005)

-------------------------------------------------------------------
Thu Oct  2 19:13:07 CEST 2008 - locilka@suse.cz

- Adjusted presentation_order for SLES and SLED installation
  proposals - software has to be proposed as almost the last one
  (bnc #431580).

-------------------------------------------------------------------
Thu Oct  2 14:00:49 CEST 2008 - locilka@suse.cz

- Added 'default_ntp_setup' into control files (SLES/D: false,
  openSUSE: true) (bnc #431259).

-------------------------------------------------------------------
Thu Oct  2 11:39:48 CEST 2008 - locilka@suse.cz

- Using two default desktops, one for inst_scenarios, another
  one (default) while inst_scenarios not used (bnc #431251,
  bnc #431503).
- Switching scenario_virtual_machine and
  scenario_virtualization_host in SLES control file (bnc #431251).
- 2.17.17

-------------------------------------------------------------------
Wed Oct  1 16:03:32 CEST 2008 - mzugec@suse.de

- use rpcbind instead of portmap for nfs installation (bnc#423026)
- 2.17.16

-------------------------------------------------------------------
Wed Oct  1 15:41:12 CEST 2008 - jsuchome@suse.cz

- if nn_NO language is selected, use nb_NO in YaST (bnc#426124)

-------------------------------------------------------------------
Wed Oct  1 13:42:18 CEST 2008 - locilka@suse.cz

- Changing pattern "Documentation" to "documentation" (bnc #431218)

-------------------------------------------------------------------
Tue Sep 30 13:20:09 CEST 2008 - locilka@suse.cz

- Replacing "networkmanager" proposal call with "general"
  (bnc #430704).

-------------------------------------------------------------------
Mon Sep 29 15:11:33 CEST 2008 - locilka@suse.cz

- Server scenarios work for i386, x86_64 archs only (bnc #430612).

-------------------------------------------------------------------
Mon Sep 29 14:56:45 CEST 2008 - kukuk@suse.de

- Replaced Minimal+Xen with Dom0.
- Removed xen_server from virtualization machine (bnc #429061).
- Added "XEN" suffix to Virtualization Host.

-------------------------------------------------------------------
Mon Sep 29 13:38:13 CEST 2008 - locilka@suse.cz

- Adding inst_lilo_convert to the update workflow (bnc #430579).

-------------------------------------------------------------------
Fri Sep 26 12:27:55 CEST 2008 - locilka@suse.cz

- Optimizing server_selections dialog layout (bnc #429977).
- Better text for installation initialization (bnc #428103).
- Better protection from removing the initial repository
  (bnc #429920).
- 2.17.15

-------------------------------------------------------------------
Thu Sep 25 14:33:36 CEST 2008 - juhliarik@suse.cz

- added calling kdump_finish to inst_finish.ycp (bnc #427732)

-------------------------------------------------------------------
Tue Sep 23 16:17:27 CEST 2008 - locilka@suse.cz

- Buggy SCR Agent run.get.suseconfig.modules replaced with
  .target.dir (bnc #429146).
- Added functionality to recover from failed read of previously
  used repositories in inst_upgrade_urls (bnc #429059).
- 2.17.14

-------------------------------------------------------------------
Mon Sep 22 16:14:54 CEST 2008 - locilka@suse.cz

- Fixed checking whether directory is mounted already (bnc #428368)

-------------------------------------------------------------------
Mon Sep 22 13:59:50 CEST 2008 - locilka@suse.cz

- KDE 3.5 moved to 'Others', removed KDE 3.5 description text.
- GNOME 2.22 changed to 2.24.
- Fixed Installation Mode dialog to show icons again (bnc #427344).
- 2.17.13

-------------------------------------------------------------------
Mon Sep 22 10:45:44 CEST 2008 - locilka@suse.cz

- Changing /sbin/udevtrigger & /sbin/udevsettle to /sbin/udevadm
  trigger & settle (bnc #427705).
- 2.17.12

-------------------------------------------------------------------
Thu Sep 18 10:35:32 CEST 2008 - locilka@suse.cz

- Definition of supported desktops added into SLES and SLED control
  files, added also default_desktop definition (bnc #427061).
- Added control file documentation for supported_desktops section.

-------------------------------------------------------------------
Fri Sep 12 15:01:46 CEST 2008 - locilka@suse.cz

- Disabling inst_suse_register in openSUSE control file
  (FATE #303458).

-------------------------------------------------------------------
Fri Sep 12 10:32:11 CEST 2008 - locilka@suse.cz

- Do not remove installation repository with the same URL as URL
  just being removed by inst_upgrade_urls (bnc #400823).
- 2.17.11

-------------------------------------------------------------------
Thu Sep 11 14:52:25 CEST 2008 - ug@suse.de

- deploy_image.desktop added (Fate #301321)
- deploy_image.rnc added

-------------------------------------------------------------------
Thu Sep 11 13:40:10 CEST 2008 - locilka@suse.cz

- Calling new client reipl_finish from yast2_inf_finish on s390
  (FATE #304960).

-------------------------------------------------------------------
Wed Sep 10 17:15:22 CEST 2008 - locilka@suse.cz

- Fixing control files to call 'inst_proposal' instead of
  'proposal' (bnc #425198).

-------------------------------------------------------------------
Wed Sep 10 15:53:44 CEST 2008 - locilka@suse.cz

- Desktop selection dialog definitions have been moved to control
  file (bnc #424678).
- 2.17.10

-------------------------------------------------------------------
Tue Sep  9 16:02:03 CEST 2008 - locilka@suse.cz

- Replacing usage of barexml with anyxml SCR  agent (bnc #424263).

-------------------------------------------------------------------
Mon Sep  8 17:49:11 CEST 2008 - locilka@suse.cz

- merged texts from proofread

-------------------------------------------------------------------
Mon Sep  8 15:57:09 CEST 2008 - locilka@suse.cz

- Added new AutoYaST client deploy_images_auto to support
  installation from images also in AutoYaST (FATE #301321).
- 2.17.9

-------------------------------------------------------------------
Fri Sep  5 12:45:00 CEST 2008 - locilka@suse.cz

- Some inst_finish steps are called in live installer only.
- Client vm_finish called only if yast2-vm is installed.
- Using WFM::ClientExists (new in yast2-core-2.17.10).
- Adjusted RPM dependencies.
- 2.17.8

-------------------------------------------------------------------
Thu Sep  4 15:02:01 CEST 2008 - sschober@suse.de

- cloning section in control.xml changed.

-------------------------------------------------------------------
Wed Sep 03 14:49:19 CEST 2008 - aschnell@suse.de

- adapted size values in control files to stricter parser in
  storage

-------------------------------------------------------------------
Tue Sep  2 15:20:09 CEST 2008 - locilka@suse.cz

- Using new <execute/> tag in control file to explicitly define
  a client to be called instead of guessing it from <name/> tag
  (openSUSE, SLED control files) (bnc #401319).
- Updated control files to call inst_prepareprogress to
  "Provide consistent progress during installation" (FATE #303860).
- All 'inst_proposal' calls changed to use the new 'execute'
  feature to have unique 'name's (needed for merging add-on control
  files).
- Adjusted RPM dependencies (FATE #303860).
- 2.17.7

-------------------------------------------------------------------
Tue Sep  2 11:10:01 CEST 2008 - visnov@suse.cz

- Use unified progressbar during installation (FATE #303860)

-------------------------------------------------------------------
Thu Aug 28 15:19:57 CEST 2008 - locilka@suse.cz

- Using new ButtonBox widget.
- Adjusted RPM dependencies.

-------------------------------------------------------------------
Thu Aug 21 13:01:40 CEST 2008 - jsuchome@suse.cz

- check for command line mode in inst_suseconfig (bnc#419132)

-------------------------------------------------------------------
Tue Aug 19 15:45:07 CEST 2008 - jsrain@suse.cz

- properly detect firstboot and do not destroy xorg.conf
  (bnc#354738)
- 2.17.6

-------------------------------------------------------------------
Fri Aug 15 10:41:24 CEST 2008 - locilka@suse.cz

- Added new globals->write_hostname_to_hosts control file option
  to configure the default for 127.0.0.2 issue (FATE #303875).
- 2.17.5

-------------------------------------------------------------------
Thu Aug 14 14:28:33 CEST 2008 - locilka@suse.cz

- Added documentation for add_on_products and its new format
  add_on_products.xml (FATE #303675).
- Fixed SCR Switch Debugger to show "Report Error" only once.

-------------------------------------------------------------------
Wed Aug 13 18:23:57 CEST 2008 - locilka@suse.cz

- Dropped some obsolete documentation.
- Started installation-features documentation (FATE #303675).
- Fixed building documentation for proposal-API.

-------------------------------------------------------------------
Tue Aug 12 10:28:24 CEST 2008 - locilka@suse.cz

- Added documentation and example for list of files to be copied
  from the previous installation.
- 2.17.4

-------------------------------------------------------------------
Mon Aug 11 17:35:47 CEST 2008 - locilka@suse.cz

- List of files to be copied from the previous installation moved
  to control file, added new API to define own list (module
  SystemFilesCopy) (FATE #305019).
- Adapted control files.

-------------------------------------------------------------------
Mon Aug 11 10:06:02 CEST 2008 - locilka@suse.cz

- Fixed WFM::Execute to use .local instead of .target in
  copy_files_finish script.

-------------------------------------------------------------------
Thu Aug  7 16:40:32 CEST 2008 - locilka@suse.cz

- Added new client inst_scenarios to offer main scenarios of the
  newly installed system.
- Configuration for inst_scenarios is defined in control file (Only
  SLES so far), client added into SLES workflow.
- Extended control file documentation (All FATE #304373).
- 2.17.3

-------------------------------------------------------------------
Wed Aug  6 13:54:07 CEST 2008 - locilka@suse.cz

- New control file entry globals->enable_kdump (default value)
  (FATE #303893).
- Adjusted control file documentation.

-------------------------------------------------------------------
Tue Aug  5 11:48:44 CEST 2008 - locilka@suse.cz

- Calling reiplauto client in SLES control file before reboot
  (FATE #304940).
- Running SCR Switch Debugger unconditionally if switching to
  installed system fails (bnc #411832).

-------------------------------------------------------------------
Mon Aug 04 16:22:55 CEST 2008 - aschnell@suse.de

- improved text during ssh installation (bnc #411079)

-------------------------------------------------------------------
Mon Aug  4 10:39:41 CEST 2008 - locilka@suse.cz

- Added kdump proposal to SLES control file (FATE #303893).

-------------------------------------------------------------------
Thu Jul 24 13:21:14 CEST 2008 - locilka@suse.cz

- Using button label "License Translations..." in complex welcome
  dialog (bnc #400616).
- SLES and SLED control files adapted to features added in 11.0.
- Added Automatic Configuration support into SLED (FATE #303396).

-------------------------------------------------------------------
Tue Jul 15 16:59:38 CEST 2008 - aschnell@suse.de

- fixed vnc connect message during installation (bnc #395834)
- 2.17.2

-------------------------------------------------------------------
Tue Jul 15 09:54:48 CEST 2008 - locilka@suse.cz

- Not only DPMS->off, but also screen-saver->off (FATE #304395).
- Added new control file feature globals->rle_offer_rulevel_4
  plus control file documentation (FATE #303798).

-------------------------------------------------------------------
Mon Jul 14 15:15:15 CEST 2008 - locilka@suse.cz

- Base-product license directory moved to control file
  (base_product_license_directory) (FATE #304865).
- Copying licenses to the system in copy_files_finish.
- Reading the license directory in inst_license.
- Icons for AC steps defined in control file.
- Adjusting DPMS 'off' when installation starts, DPMS 'on' when
  finishes (FATE #304395).
- Icons for inst_finish.
- 2.17.1

-------------------------------------------------------------------
Fri Jul 11 11:11:11 CEST 2008 - locilka@suse.cz

- Added documentation for AC Setup and for texts in control file.

-------------------------------------------------------------------
Thu Jul 10 17:48:59 CEST 2008 - locilka@suse.cz

- Settings for Automatic Configuration moved to control file
  because of code reuse for different AC in first boot
  (FATE #303939).

-------------------------------------------------------------------
Thu Jul 10 13:31:00 CEST 2008 - locilka@suse.cz

- Only directories in release-notes directory are considered to be
  real release notes (bnc #407922).
- 2.17.0

-------------------------------------------------------------------
Wed Jul  9 17:09:15 CEST 2008 - mvidner@suse.cz

- Fixed building in a prefix (/etc).

-------------------------------------------------------------------
Wed Jul  9 15:12:53 CEST 2008 - locilka@suse.cz

- Initializing the 'use_automatic_configuration' in first-stage
  installation worker (bnc #404122).
- Adjusted dependency on autoyast2-installation bacause of new
  function AutoinstConfig::getProposalList().

-------------------------------------------------------------------
Thu Jun 26 16:43:32 CEST 2008 - locilka@suse.cz

- Fixed help text for deploying images (bnc #391086).
- Fixed 'Do not panic!' text (bnc #388251).

-------------------------------------------------------------------
Wed Jun 25 16:44:33 CEST 2008 - ug@suse.de

- proposal selection possible via autoyast profile (fate#302946)

-------------------------------------------------------------------
Tue Jun 17 14:23:04 CEST 2008 - lslezak@suse.cz

- use Pkg::SourceSaveAll() instead of Pkg::SourceFinishAll()
  (bnc#395738)

-------------------------------------------------------------------
Fri Jun 13 15:37:24 CEST 2008 - locilka@suse.cz

- Removing Pkg//Source and Target finish from inst_inc_all that
  had been saving sources also in case of aborting the installation
  and moving it to inst_congratulate and umount_finish
  (bnc #398315).
- Freeing internal variables in ImageInstallation module after
  images are deployed (bnc #395030).

-------------------------------------------------------------------
Thu Jun 12 16:33:24 CEST 2008 - locilka@suse.cz

- Special mounts (such as /proc) are never remounted read-only
  in umount_finish anymore (bnc #395034)
- Added progress for adding / removing repositories in
  inst_upgrade_urls client (bnc #399223)

-------------------------------------------------------------------
Wed Jun  4 11:57:07 CEST 2008 - locilka@suse.cz

- Copying /license.tar.gz to /etc/YaST2/license/ (bnc #396444).
- Initial mouse probing has been disabled (bnc #395426).

-------------------------------------------------------------------
Tue Jun  3 13:44:56 CEST 2008 - locilka@suse.cz

- Umounting temporary directory in inst_pre_install (if already
  mounted) before new mount is called.
- Always use --numeric-owner (always use numbers for user/group
  names) when deploying images (bnc #396689).

-------------------------------------------------------------------
Mon Jun  2 12:33:57 CEST 2008 - locilka@suse.cz

- Return `next when going back to the automatic configuration
  dialog instead of returning `auto that would finish YaST and
  never start it again (bnc #395098).
- 2.16.49

-------------------------------------------------------------------
Wed May 28 16:23:22 CEST 2008 - ug@suse.de

- timeout in case of hardware probing problems
  when autoyast is in use (especially for harddisk Reports)
  bnc#395099
- 2.16.48

-------------------------------------------------------------------
Mon May 19 09:29:15 CEST 2008 - locilka@suse.cz

- Creating SuSEConfig hook file at installation_settings_finish
  in case of update. The file has to be created to force the
  SuSEConfig run on first boot (bnc #390930).
- Workaround for as-big-dialog-as-possible in License Agreement
  dialog (bnc #385257).
- Adding FACTORY repositories with priority 120, update source with
  priority 20 (bnc #392039).
- 2.16.47

-------------------------------------------------------------------
Fri May 16 16:40:22 CEST 2008 - jsrain@suse.cz

- added categories Settings and System into desktop file
  (bnc #382778)

-------------------------------------------------------------------
Thu May 15 13:13:13 CEST 2008 - locilka@suse.cz

- Changed dialog content for starting the installation
  (bnc #390614).
- Fixed sorting of repositories offered during upgrade to sort by
  repository name (bnc #390612).
- 2.16.46

-------------------------------------------------------------------
Thu May 15 10:32:09 CEST 2008 - jsuchome@suse.cz

- sort keyboard list according to translated items (bnc #390610)

-------------------------------------------------------------------
Wed May 14 15:22:50 CEST 2008 - kmachalkova@suse.cz

- inst_hostname client added to automatic configuration scripts -
  needed to generate random hostname and 127.0.0.2 line in
  /etc/hosts (bnc #383336)

-------------------------------------------------------------------
Wed May 14 14:29:21 CEST 2008 - jsrain@suse.cz

- use process agent instead of background agent when installing
  live image (bnc #384960)
- 2.16.45

-------------------------------------------------------------------
Mon May 12 15:10:50 CEST 2008 - locilka@suse.cz

- Added help to "Image Deployment" (bnc #388665).

-------------------------------------------------------------------
Tue May  6 17:37:22 CEST 2008 - locilka@suse.cz

- When reusing the old repositories during upgrade, copying also
  'autorefresh' and 'alias' (bnc #387261).
- Added software->dropped_packages into the control file to replace
  'delete old packages' (bnc #300540).
- 2.16.44

-------------------------------------------------------------------
Mon May  5 13:26:27 CEST 2008 - locilka@suse.cz

- Typofix (bnc #386606).

-------------------------------------------------------------------
Fri May  2 22:27:21 CEST 2008 - mzugec@suse.cz

- Don't stop network (by killing dhcpcd) at the end of 1.st stage
  (bnc #386588)

-------------------------------------------------------------------
Wed Apr 30 12:07:45 CEST 2008 - locilka@suse.cz

- Adding name and alias tags to extrasources (irc #yast/today).
- 2.16.43

-------------------------------------------------------------------
Wed Apr 30 10:24:19 CEST 2008 - locilka@suse.cz

- Making automatic installation more robust (bnc #384972).
- 2.16.42

-------------------------------------------------------------------
Tue Apr 29 12:59:49 CEST 2008 - locilka@suse.cz

- Disabling Progress when calling inst_finish scripts.

-------------------------------------------------------------------
Mon Apr 28 11:42:21 CEST 2008 - locilka@suse.cz

- Handling KDE3 vs KDE4 in default logon and window managers
  (bnc #381821).
- Optional and extra URLs moved to control file as well as default
  update repository (bnc #381360).
- Added possibility to abort installation during image deployment
  (bnc #382326).
- Progress for inst_proposal.
- 2.16.41

-------------------------------------------------------------------
Fri Apr 25 18:15:09 CEST 2008 - locilka@suse.cz

- New desktop selection dialog (bnc #379157).
- 2.16.40

-------------------------------------------------------------------
Thu Apr 24 14:54:53 CEST 2008 - locilka@suse.cz

- New  better shiny unified progress for image deployment.
- Showing also the just-handled image name (bnc #381188).
- 2.16.39

-------------------------------------------------------------------
Wed Apr 23 15:10:24 CEST 2008 - locilka@suse.cz

- Enabling inst_suseconfig in Automatic configuration (bnc #381751)
- Fixed run_df agent to ignore read errors on rootfs (bnc #382733)

-------------------------------------------------------------------
Tue Apr 22 18:46:51 CEST 2008 - locilka@suse.cz

- Adjusting automatic configuration UI to use two progress bars
  instead of one.

-------------------------------------------------------------------
Tue Apr 22 12:26:52 CEST 2008 - locilka@suse.cz

- Fixed filtering-out already registered repos (bnc #379051).
- Client inst_prepare_image moved to installation proposal make
  disabling 'installation from images' easy (bnc #381234).
- 2.16.38

-------------------------------------------------------------------
Mon Apr 21 15:28:24 CEST 2008 - locilka@suse.cz

- Calling 'xset r off' & 'xset m 1' (bnc #376945).
- Better help for Automatic configuration (bnc #381904).

-------------------------------------------------------------------
Mon Apr 21 14:48:58 CEST 2008 - locilka@suse.cz

- Using new DefaultDesktop::SelectedDesktops for writing the
  display manager configuration.

-------------------------------------------------------------------
Fri Apr 18 16:17:54 CEST 2008 - locilka@suse.cz

- Calling 'xset -r off' at the beginning of installation (both
  first and second stage) in X on XEN (bnc #376945).

-------------------------------------------------------------------
Fri Apr 18 16:01:13 CEST 2008 - juhliarik@suse.cz

- Added text for using kexec (yast_inf_finish.ycp)

-------------------------------------------------------------------
Thu Apr 17 17:15:02 CEST 2008 - locilka@suse.cz

- Added more debugging messages into ImageInstallation module.

-------------------------------------------------------------------
Thu Apr 17 14:01:46 CEST 2008 - locilka@suse.cz

- Added image-downloading progress (reusing existent progress bar).
- 2.16.37

-------------------------------------------------------------------
Wed Apr 16 14:20:06 CEST 2008 - locilka@suse.cz

- Running runlevel proposal after software proposal (bnc #380141).
- Using new possibility to disable and then reenable package
  callbacks (system_analysis, deploy_images).

-------------------------------------------------------------------
Tue Apr 15 11:45:18 CEST 2008 - locilka@suse.cz

- ImageInstallation tries to find details-<arch>.xml, then
  details.xml to provide useful progress while deploying images.
- 2.16.36

-------------------------------------------------------------------
Tue Apr 15 10:22:04 CEST 2008 - mvidner@suse.cz

- Enable printing the last few debugging log messages in the crash
  handler, even if Y2DEBUG is not set (fate#302166).
- 2.16.35

-------------------------------------------------------------------
Mon Apr 14 16:44:09 CEST 2008 - locilka@suse.cz

- Fixed typo in inst_network_check (bnc #379491).
- Fixed help for inst_mode (bnc #374360).

-------------------------------------------------------------------
Mon Apr 14 13:54:42 CEST 2008 - locilka@suse.cz

- Modifying SystemFilesCopy::CopyFilesToSystem to newly accept
  a parameter which defines where to extract cached files
  (fate #302980).
- Caching system files in the System Analysis dialog.
- Some better texts (bnc #377959).
- Better text for Software Selection dialog (bnc #379157).
- 2.16.34

-------------------------------------------------------------------
Fri Apr 11 18:21:53 CEST 2008 - locilka@suse.cz

- Changing Accept buttons to Install, Update and OK (FATE #120373).

-------------------------------------------------------------------
Fri Apr 11 17:55:32 CEST 2008 - locilka@suse.cz

- Added another per-image progress into the Installation images
  deployment (it requires details.xml).
- 2.16.33

-------------------------------------------------------------------
Fri Apr 11 15:33:17 CEST 2008 - juhliarik@suse.cz

- Added loading kernel via kexec (fate #303395)

-------------------------------------------------------------------
Thu Apr 10 12:02:07 CEST 2008 - locilka@suse.cz

- Filtering installation imagesets using the default architecture.
- Installation from images sets the download area (SourceManager).
- Removing image after it is deployed.
- Preparing image installation dialog for two progress-bars.
- 2.16.32

-------------------------------------------------------------------
Wed Apr  9 16:39:36 CEST 2008 - jsrain@suse.cz

- handle compressed logs properly at the end of first stage
  installation (fate #300637)
- 2.16.31

-------------------------------------------------------------------
Tue Apr  8 19:40:58 CEST 2008 - locilka@suse.cz

- Adjusted control file to sort installation overview via
  presentation_order and propose it via the real appearance.
- Fixed selecting the right imageset - the rule is currently that
  all patterns in imageset must be selected for installation
  (bnc #378032).

-------------------------------------------------------------------
Mon Apr  7 15:20:14 CEST 2008 - locilka@suse.cz

- Added new control file entry kexec_reboot that defines whether
  kexec should be used instead of reboot at the end of the first
  stage installation (FATE #303395).

-------------------------------------------------------------------
Fri Apr  4 17:02:23 CEST 2008 - locilka@suse.cz

- Improved user-feedback during automatic configuration.
- 2.16.30

-------------------------------------------------------------------
Fri Apr  4 14:06:22 CEST 2008 - jsrain@suse.cz

- added restart handling for live installation

-------------------------------------------------------------------
Wed Apr  3 16:40:16 CEST 2008 - locilka@suse.cz

- Removed Winkeys support during installation (bnc 376248).
- Fixed the decision-making process which images fits the best.
- Added new control file entries to adjust the Community
  Repositories and Add-Ons during installation.
- Cosmetic changes when initializing the wizard steps according to
  control file.
- Fixed untarring bzip2 or gzip-based images.
- Changed instalation from images to count the best image-set
  from patterns (list of patterns in image-set) in images.xml.
- 2.16.29

-------------------------------------------------------------------
Tue Apr  1 13:12:00 CEST 2008 - locilka@suse.cz

- Automatic configuration can be newly defined by control file. Two
  new variables have been added enable_autoconfiguration and
  autoconfiguration_default.
- New functionality to select the best-matching image for image
  installation if more than one fit.
- 2.16.28

-------------------------------------------------------------------
Tue Apr  1 12:36:52 CEST 2008 - jsrain@suse.cz

- added live installation workflow to default control file
- updated inst_finish clients handling for live installation

-------------------------------------------------------------------
Tue Apr  1 10:15:34 CEST 2008 - jsrain@suse.cz

- merged texts from proofread

-------------------------------------------------------------------
Mon Mar 31 16:42:40 CEST 2008 - locilka@suse.cz

- There are currently two possible patterns/desktops that can use
  kdm: kde4-kdm and kdebase3-kdm (bnc #372506).

-------------------------------------------------------------------
Fri Mar 28 13:33:31 CET 2008 - locilka@suse.cz

- Automatic configuration has been moved from the end of the first
  stage to the second stage. It's non-interactive (FATE #303396).
- Fixed installation from images (FATE #303554).
- ImageInstallation can newly handle .lzma images.
- 2.16.27

-------------------------------------------------------------------
Thu Mar 27 13:37:02 CET 2008 - locilka@suse.cz

- Fixed ZMD service handling, the correct name is novell-zmd
  (bnc #356655).

-------------------------------------------------------------------
Wed Mar 26 11:21:18 CET 2008 - locilka@suse.cz

- Added new entry to control file root_password_as_first_user to
  make it configurable (bnc #359115 comment #14).
- Control file modified to call installation-from-images clients.

-------------------------------------------------------------------
Tue Mar 25 13:12:39 CET 2008 - locilka@suse.cz

- Using Image-Installation clients (done by jsrain).
- Store/Restore resolvable-state functions added into
  ImageInstallation module.

-------------------------------------------------------------------
Fri Mar 21 10:48:20 CET 2008 - locilka@suse.cz

- Dropping keep_installed_patches support from control file as it
  is currently handled by libzypp itself (bnc #349533).

-------------------------------------------------------------------
Thu Mar 20 10:27:09 CET 2008 - locilka@suse.cz

- Added system_settings_finish call to the inst_finish
  (bnc #340733).

-------------------------------------------------------------------
Wed Mar 19 17:27:30 CET 2008 - locilka@suse.cz

- Agent anyxml has been renamed to barexml as it can't really read
  all possible XML files (bnc #366867)

-------------------------------------------------------------------
Wed Mar 19 13:53:05 CET 2008 - locilka@suse.cz

- When checking whether to run the second stage, considering also
  autoinstallation, not only installation (bnc #372322).
- 2.16.26

-------------------------------------------------------------------
Tue Mar 18 18:19:00 CET 2008 - locilka@suse.cz

- Fixed writing disabled modules and proposals during the
  inst_finish run (bnc #364066).
- Calling pre_umount_finish also in AutoYaST (bnc #372322).
- 2.16.25

-------------------------------------------------------------------
Mon Mar 17 12:43:32 CET 2008 - jsrain@suse.cz

- added 'StartupNotify=true' to the desktop file (bnc #304964)

-------------------------------------------------------------------
Mon Mar 17 11:04:38 CET 2008 - locilka@suse.cz

- Automatic configuration is now disabled for mode update.
- The whole second stage in now disabled for mode update.
- Added help text for "Use Automatic Configuration" check-box.
- 2.16.24

-------------------------------------------------------------------
Fri Mar 14 15:02:27 CET 2008 - locilka@suse.cz

- Added possibility to run automatic configuration instead of the
  whole second stage installation (fate #303396).
- Adjusted RPM dependencies.
- Creating and removing the file runme_at_boot is currently handled
  by YaST (YCP) installation scripts.
- Added new client inst_rpmcopy_secondstage that calls inst_rpmcopy
  because of DisabledModules disabling both first and second stage
  occurency of that script.
- Changed control file to call the new script in second stage.
- 2.16.23

-------------------------------------------------------------------
Mon Mar 10 11:25:57 CET 2008 - locilka@suse.cz

- Disabling the window menu in IceWM preferences to make the
  inst-sys 600 kB smaller (*.mo files). Thanks to mmarek.

-------------------------------------------------------------------
Fri Mar  7 11:35:29 CET 2008 - jsuchome@suse.cz

- control.openSUSE.xml: country_simple is for keyboard and language,
  not for timezone
- added 1st stage step for root password dialog (fate#302980)
- 2.16.22

-------------------------------------------------------------------
Thu Mar 06 10:57:42 CET 2008 - aschnell@suse.de

- call rcnetwork with option onboot during start of second stage
  (bnc #363423)
- 2.16.21

-------------------------------------------------------------------
Wed Mar  5 18:52:30 CET 2008 - locilka@suse.cz

- Remember (first stage) and restore (second stage) DisabledModules
  (bnc #364066).
- 2.16.20

-------------------------------------------------------------------
Wed Mar  5 16:30:22 CET 2008 - locilka@suse.cz

- Using client country_simple instead of timezone and language in
  the installation overview (FATE #302980).
- Using new users client in that overview too (FATE #302980).
- Do not remove already registered installation repositories during
  upgrade if they match the old repositories on system
  (bnc #360109).

-------------------------------------------------------------------
Mon Mar  3 21:12:25 CET 2008 - coolo@suse.de

- trying to change defaults for running gdb (arvin's patch)

-------------------------------------------------------------------
Mon Mar  3 15:17:23 CET 2008 - locilka@suse.cz

- Requiring the latest Language::Set functionality by RPM deps.

-------------------------------------------------------------------
Tue Feb 26 12:39:37 CET 2008 - jsuchome@suse.cz

- functionality of integrate_translation_extension.ycp moved into
  Language::Set, inst_complex_welcome adapted (F#302955)

-------------------------------------------------------------------
Fri Feb 22 11:27:13 CET 2008 - locilka@suse.cz

- "iscsi-client" added into modules to clone (bnc #363229 c#1).
- Removing focus from release notes content to make the default
  button focussed instead (bnc #363976).

-------------------------------------------------------------------
Thu Feb 21 06:26:22 CET 2008 - coolo@suse.de

- don't repeat the header

-------------------------------------------------------------------
Wed Feb 20 10:35:04 CET 2008 - locilka@suse.cz

- Showing release notes in tabs only if more than one product is
  installed (bnc #359137).
- Added better text for the complex welcome dialog (bnc #359528).
- Adjusted RPM dependencies (new Language API, see below).
- 2.16.19

-------------------------------------------------------------------
Wed Feb 20 10:24:26 CET 2008 - jsuchome@suse.cz

- inst_complex_welcome: save keyboard settings (bnc #360559),
  use the API from Language.ycp for generating items

-------------------------------------------------------------------
Fri Feb 15 14:28:45 CET 2008 - jsrain@suse.cz

- updated image-based installatoin not to use any hardcoded
  image names

-------------------------------------------------------------------
Thu Feb 14 11:20:04 CET 2008 - locilka@suse.cz

- Function FileSystemCopy from live-installer has been moved
  to ImageInstallation module (installation).
- Adjusted RPM dependencies (Installation module in yast2).

-------------------------------------------------------------------
Wed Feb 13 14:18:16 CET 2008 - jsrain@suse.cz

- added handling of update initiated from running system

-------------------------------------------------------------------
Tue Feb 12 10:26:15 CET 2008 - locilka@suse.cz

- Added new update_wizard_steps YCP client for easy updating or
  redrawing installation wizard steps from other modules.

-------------------------------------------------------------------
Mon Feb 11 18:28:00 CET 2008 - locilka@suse.cz

- Installation clients 'auth', 'user', and 'root' have been
  disabled by default. First-stage users will enable them only
  if needed.

-------------------------------------------------------------------
Fri Feb 08 13:06:19 CET 2008 - aschnell@suse.de

- during installation allow yast to be started from gdb with
  Y2GDB=1 on kernel command line (fate #302346)

-------------------------------------------------------------------
Fri Feb  8 10:37:02 CET 2008 - locilka@suse.cz

- Umount(s) used with -l and -f params.

-------------------------------------------------------------------
Thu Feb  7 14:19:11 CET 2008 - locilka@suse.cz

- Functionality that integrates the just-selected language
  translation has been moved to integrate_translation_extension
  client to make it available for other modules.
- New label for "Show in Fullscreen" button to better match what
  it really does (bnc #359527).
- Module InstExtensionImage moved to yast2.
- Added new disintegrate_all_extensions client that is called at
  the end of the initial installation to umount and remove all
  integrated inst-sys extensions.
- 2.16.18

-------------------------------------------------------------------
Wed Feb  6 13:23:35 CET 2008 - locilka@suse.cz

- Better /lbin/wget handling in InstExtensionImage.
- Speed-up inst_complex_welcome optimalizations (e.g., skipping
  downloading extension already by Linuxrc)

-------------------------------------------------------------------
Tue Feb  5 16:04:15 CET 2008 - locilka@suse.cz

- Squashfs image needs to be mounted using '-o loop'.
- Displaying busy cursor when downloading the extension.
- 2.16.17

-------------------------------------------------------------------
Mon Feb  4 19:04:29 CET 2008 - locilka@suse.cz

- Modular inst-sys used for localizations (FATE #302955).
- Tabs have been removed from installation proposal.
- 2.16.16

-------------------------------------------------------------------
Fri Feb  1 16:08:26 CET 2008 - locilka@suse.cz

- Added new InstExtensionImage module for integration of modular
  inst-sys images on-the-fly (FATE #302955).

-------------------------------------------------------------------
Thu Jan 31 19:05:49 CET 2008 - aschnell@suse.de

- reflect init-script rename from suse-blinux to sbl
- 2.16.15

-------------------------------------------------------------------
Thu Jan 31 15:02:56 CET 2008 - jsuchome@suse.cz

- call users_finish.ycp from inst_finish.ycp (FATE #302980)

-------------------------------------------------------------------
Thu Jan 31 12:58:42 CET 2008 - locilka@suse.cz

- Fixed inst_restore_settings client: NetworkDevices are now
  NetworkInterfaces.
- 2.16.14

-------------------------------------------------------------------
Thu Jan 31 11:14:46 CET 2008 - locilka@suse.cz

- Added docu. for *_finish scripts (needed for FATE #302980).
- Welcome dialog can newly show the license according to the just
  selected language and also show other lozalizations if needed.
- 2.16.13

-------------------------------------------------------------------
Wed Jan 30 15:22:29 CET 2008 - aschnell@suse.de

- Use icewm instead of fvwm during installation (bnc #357240)
- 2.16.12

-------------------------------------------------------------------
Wed Jan 30 14:15:50 CET 2008 - fehr@suse.de

- Add installation step for disk partitioning between time zone
  and software selection
- put user config after disk partitioning

-------------------------------------------------------------------
Wed Jan 30 09:51:42 CET 2008 - locilka@suse.cz

- Added -noreset option to the VNC startup script (bnc #351338).
- Added inst_user_first.ycp call to the control file right before
  the installation proposal.
- Fixed visibility of ZMD Turnoff checkbox (bnc #356655).

-------------------------------------------------------------------
Tue Jan 29 17:34:03 CET 2008 - locilka@suse.cz

- New desktop selection dialog without system task combo-boxes.
  System selection with icons (bnc #356926).
- More UI checking in dialogs.
- Unified DefaultDesktop module and software/desktop selection
  dialog in installation.

-------------------------------------------------------------------
Mon Jan 28 13:00:19 CET 2008 - aschnell@suse.de

- support Qt and Gtk frontend in startup scripts
- hack for key-autorepeat during installation (bnc #346186)
- 2.16.11

-------------------------------------------------------------------
Fri Jan 25 13:35:13 CET 2008 - locilka@suse.cz

- Reduced Wizard redrawing in the installation workflow.

-------------------------------------------------------------------
Thu Jan 24 15:21:39 CET 2008 - aschnell@suse.de

- start service brld before suse-blinux (bug #354769)
- 2.16.10

-------------------------------------------------------------------
Mon Jan 21 11:05:16 CET 2008 - kmachalkova@suse.cz

- Re-enabled thread support for ncurses UI in YaST2.call
  (bug #164999, FaTE #301899)

-------------------------------------------------------------------
Mon Jan 21 10:53:50 CET 2008 - locilka@suse.cz

- Release Notes UI facelifting.
- Splitting Welcome script dialog single-loop into functions.

-------------------------------------------------------------------
Wed Jan 16 15:49:59 CET 2008 - locilka@suse.cz

- Calling SetPackageLocale and SetTextLocale in the initial
  installation dialog (selecting language) (#354133).

-------------------------------------------------------------------
Mon Jan 14 13:39:00 CET 2008 - locilka@suse.cz

- Added new Language/Keyboard/License dialog (FATE #302957).
- Updated control files.
- 2.16.9

-------------------------------------------------------------------
Thu Jan 10 14:08:17 CET 2008 - locilka@suse.cz

- Extended system type and software selection dialog. Added base
  pattern (selected desktop) description, helps, default status
  for secondary selections, ...
- Added possibility to control visibility of Online Repositories
  via the installation control file (hidden by default).
- Added more control-file documentation.

-------------------------------------------------------------------
Tue Dec 18 16:54:39 CET 2007 - locilka@suse.cz

- Added new desktop and software selection dialog.
- 2.16.8

-------------------------------------------------------------------
Mon Dec 17 11:08:42 CET 2007 - locilka@suse.cz

- Hidden Mouse-probing busy popup.
- New YCP module InstData stores the installation data that should
  be shared among the installation clients.
- Installation repository initialization moved to the unified
  progress when probing the system.
- System analysis has been split into two scripts: inst_mode and
  inst_system_analysis to make the maintenance easier (also in
  control file).
- 2.16.7

-------------------------------------------------------------------
Thu Dec 13 14:25:30 CET 2007 - locilka@suse.cz

- Added a possibility to stop and disable the ZMD service in the
  last (congratulate) dialog of installation (FATE #302495).
- Adjusted the SLES control file: module arguments
  'show_zmd_turnoff_checkbox' and 'zmd_turnoff_default_state'.

-------------------------------------------------------------------
Mon Dec 10 12:13:14 CET 2007 - locilka@suse.cz

- Removed dependency on yast2-country, added dependency on
  yast2-country-data.

-------------------------------------------------------------------
Wed Dec  5 11:13:05 CET 2007 - mzugec@suse.cz

- description says network cards are wireless (#346133)

-------------------------------------------------------------------
Mon Dec  3 16:49:46 CET 2007 - locilka@suse.cz

- Installation Mode dialog adapted to new bright and better mod_UI.
- Using informative icon in some inst_network_check script.
- 2.16.6

-------------------------------------------------------------------
Mon Dec  3 14:34:38 CET 2007 - locilka@suse.cz

- Installation Mode dialog adapted to new mod-UI and to new
  Image-Dimming support in UI.

-------------------------------------------------------------------
Thu Nov 29 16:27:59 CET 2007 - locilka@suse.cz

- Using Progress::NewProgressIcons to show icons during the network
  setup in first stage and during system probing.

-------------------------------------------------------------------
Tue Nov 27 19:14:15 CET 2007 - sh@suse.de

- Use string ID "contents" rather than YCPSymbol `contents
  for Wizard ReplacePoint
- 2.16.5

-------------------------------------------------------------------
Fri Nov 23 13:36:54 CET 2007 - locilka@suse.cz

- Using translations for inst_finish steps (#343783).
- 2.16.4

-------------------------------------------------------------------
Tue Nov 20 11:08:23 CET 2007 - locilka@suse.cz

- Shutting down all dhcpcd clients when reconfiguring network in
  the first stage and when finishing the installation (#308577).
- 'Copy 70-persistent-cd.rules' functionality has been moved here
  from yast2-network (#328126).

-------------------------------------------------------------------
Mon Nov 19 15:35:10 CET 2007 - locilka@suse.cz

- Fixed busy texts for restarting YaST vs. finishing the instal.
- Unified used terminology (repositories) (FATE #302970).

-------------------------------------------------------------------
Tue Nov 13 13:54:13 CET 2007 - locilka@suse.cz

- Script copy_files_finish.ycp cleaned up.

-------------------------------------------------------------------
Fri Nov  9 13:30:34 CET 2007 - locilka@suse.cz

- Boot Installed System option has been removed (#327505).
- Installation Mode dialog has been redesigned using
  self-descriptive icons for all options.
- Return value from inst_repair is evaluated, error is reported in
  case of failure.
- 2.16.3

-------------------------------------------------------------------
Fri Nov  2 16:31:06 CET 2007 - locilka@suse.cz

- Adjusted RPM dependencies (Internet module has been moved from
  yast2-network to yast2).

-------------------------------------------------------------------
Tue Oct 30 17:26:51 CET 2007 - locilka@suse.cz

- Modules Hotplug and HwStatus moved to yast2.rpm to remove
  dependency of storage on installation.
- 2.16.2

-------------------------------------------------------------------
Wed Oct 24 16:32:41 CEST 2007 - locilka@suse.cz

- Changes in StorageDevice module API (#335582).
- 2.16.1

-------------------------------------------------------------------
Mon Oct 15 16:00:06 CEST 2007 - locilka@suse.cz

- Abort the installation instead of halting the system in case of
  declining the license when installing from LiveCD (#330730).

-------------------------------------------------------------------
Thu Oct 11 15:00:03 CEST 2007 - jsrain@suse.cz

- show release notes properly in live installation (#332862)

-------------------------------------------------------------------
Wed Oct  3 17:50:11 CEST 2007 - locilka@suse.cz

- Added "Network Type" information to the First Stage Network Setup
- 2.16.0

-------------------------------------------------------------------
Wed Oct  3 09:53:55 CEST 2007 - mvidner@suse.cz

- Do not try to package COPYRIGHT.english, it is gone from
  devtools (#299144).

-------------------------------------------------------------------
Tue Oct  2 16:04:55 CEST 2007 - ug@suse.de

- typo fixed (#328172)

-------------------------------------------------------------------
Mon Sep 24 16:43:11 CEST 2007 - locilka@suse.cz

- Changed default delete_old_packages back to 'true' after finding
  and fixing all remaining issues with 'false' (changed by coolo)
- Added new option 'online_repos_preselected' into the control file
  to make default status of Online Repositories easily configurable
  (#327791).
- Initializing the default behavior of Online Repositories in
  inst_features according to the control file (#327791).
- 2.15.54

-------------------------------------------------------------------
Fri Sep 21 16:35:18 CEST 2007 - locilka@suse.cz

- Start dhcpcd using WFM instead of SCR (#326342).
- 2.15.53

-------------------------------------------------------------------
Fri Sep 21 09:53:37 CEST 2007 - locilka@suse.cz

- When normal umount at the end of the installation fails, try
  at least: sync, remount read-only, umount --force.
- Report all services running in the installation directory
  (both #326478).
- 2.15.52

-------------------------------------------------------------------
Thu Sep 20 12:23:01 CEST 2007 - locilka@suse.cz

- Changed inst_upgrade_urls to add sources not enabled during the
  upgrade in a disabled state instead of ignoring them (#326342).
- 2.15.51

-------------------------------------------------------------------
Tue Sep 18 19:50:52 CEST 2007 - locilka@suse.cz

- Fixed tar syntax: --ignore-failed-read param. position (#326055).
- 2.15.50

-------------------------------------------------------------------
Thu Sep 13 16:18:30 CEST 2007 - locilka@suse.cz

- Fixed inst_upgrade_urls to re-register sources with their
  repository names taken from the upgraded system (#310209).
- 2.15.49

-------------------------------------------------------------------
Tue Sep 11 20:03:02 CEST 2007 - aschnell@suse.de

- don't swapoff after 1st stage installation (bug #308121)
- 2.15.48

-------------------------------------------------------------------
Tue Sep 11 11:07:20 CEST 2007 - locilka@suse.cz

- Calling ntp-client_finish instead of ntp_client_finish in the
  inst_finish script (#309430).

-------------------------------------------------------------------
Wed Sep  5 14:48:33 CEST 2007 - locilka@suse.cz

- Reinitializing variable for skipping add-on-related clients with
  its default value in inst_system_analysis (#305554).
- 2.15.47

-------------------------------------------------------------------
Wed Sep  5 13:24:32 CEST 2007 - jsrain@suse.cz

- removed inst_fam.ycp (also from control files) (#307378)

-------------------------------------------------------------------
Mon Sep  3 12:45:41 CEST 2007 - locilka@suse.cz

- Creating symlinks to .curlrc and .wgetrc files from the root.
- Adjusting RPM dependencies (yast2-core, new builtin 'setenv').
- Adjusting ENV variables with proxy settings (all three #305163).
- Writing also proxy setting into Install.inf (#298001#c5).
- 2.15.46

-------------------------------------------------------------------
Fri Aug 31 16:26:07 CEST 2007 - locilka@suse.cz

- Calling ntp_client_finish client at the end of the installation
  (#299238#c9).
- 2.15.45

-------------------------------------------------------------------
Fri Aug 24 09:25:53 CEST 2007 - locilka@suse.cz

- Changing forgotten "catalogs" to "initializing..." (#302384).
- 2.15.44

-------------------------------------------------------------------
Tue Aug 21 16:10:16 CEST 2007 - locilka@suse.cz

- Fixed evaluating of "enabled" tag in map of repositories in
  inst_upgrade_urls (#300901).
- Added ssh_host_dsa_key ssh_host_dsa_key.pub ssh_host_rsa_key
  ssh_host_rsa_key.pub to be optionally copied as well as the SSH1
  keys (#298798).
- Allowing to abort the "System Probing" dialog (#298049).
- 2.15.43

-------------------------------------------------------------------
Wed Aug 15 17:30:06 CEST 2007 - mzugec@suse.cz

- mark string for translation (#300268)

-------------------------------------------------------------------
Fri Aug 10 11:19:36 CEST 2007 - locilka@suse.cz

- Using "Online Repositories" for Internet/Web-based/Additional/...
  repositories downloaded from web during the first stage
  installation (#296407).
- 2.15.42

-------------------------------------------------------------------
Wed Aug  8 12:35:28 CEST 2007 - jsrain@suse.cz

- show reboot message within live installation without timeout
  (#297691)
- 2.15.41

-------------------------------------------------------------------
Mon Aug  6 08:58:02 CEST 2007 - locilka@suse.cz

- Renamed product/default repositories check-box to "Add Internet
  Repositories Before Installation" (#297580).
- Added help for that check-box (#296810).
- First stage network setup dialog - changes in dialog alignment
  (#295043).
- Initialize mouse after installation steps are displayed (#296406)
- 2.15.40

-------------------------------------------------------------------
Thu Aug  2 08:53:56 CEST 2007 - jsrain@suse.cz

- do not show "Clone" check box in live installation
- 2.15.39

-------------------------------------------------------------------
Wed Aug  1 11:00:15 CEST 2007 - locilka@suse.cz

- Changing remote repositories link to http://download.opensuse.org
  (#297628)

-------------------------------------------------------------------
Wed Aug  1 10:33:45 CEST 2007 - mvidner@suse.cz

- Removed Provides/Obsoletes for ancient yast package names,
  with the devel-doc subpackage they broke yast2-schema build.
- 2.15.38

-------------------------------------------------------------------
Tue Jul 31 11:29:53 CEST 2007 - lslezak@suse.cz

- inst_extrasources - register the extra repositories in content
  file automatically without asking user (#290040), do not download
  metadata from the extra sources (offline registration) (#290040,
  #288640)

-------------------------------------------------------------------
Mon Jul 30 12:38:31 CEST 2007 - locilka@suse.cz

- Added inst_upgrade_urls client which offers URLs used on the
  system to be used during the upgrade as well (FATE #301785).
- Calling the client from control file.
- Adjusted RPM dependencies (.anyxml SCR agent).
- 2.15.37

-------------------------------------------------------------------
Sun Jul 29 22:39:31 CEST 2007 - locilka@suse.cz

- Fixed curl parameters for network test in first stage (#295484).

-------------------------------------------------------------------
Thu Jul 26 17:51:29 CEST 2007 - mzugec@suse.cz

- set variables VNC and USE_SSH in S07-medium (#294485)
- 2.15.36

-------------------------------------------------------------------
Wed Jul 25 12:48:50 CEST 2007 - mvidner@suse.cz

- startup scripts: Call initviocons only if it exists (#173426).
- 2.15.35

-------------------------------------------------------------------
Wed Jul 25 10:58:29 CEST 2007 - locilka@suse.cz

- Renamed yast2-installation-doc to yast2-installation-devel-doc
  (FATE #302461).
- Removed ping-based internet test from the First-stage network
  setup test.
- Sped up internet test by adding timeouts and by downloading only
  the page header.
- Added help texts to the network setup dialogs.

-------------------------------------------------------------------
Tue Jul 24 13:20:36 CEST 2007 - locilka@suse.cz

- Control file: Unified wizard step names with dialogs, removed
  Clean Up step part of the Online Update is now Registration
  (#293095).
- Call inst_network_check (and setup) only in Add-On products
  and/or Additional Product Sources were requested to be used
  (#293808).

-------------------------------------------------------------------
Tue Jul 24 10:48:02 CEST 2007 - locilka@suse.cz

- Splitting auto-generated documentation into separate package
  yast2-installation-doc (FATE #302461).
- 2.15.34

-------------------------------------------------------------------
Thu Jul 19 16:36:19 CEST 2007 - locilka@suse.cz

- If network setup in the first-stage installation is cancelled,
  return to the previous dialog (network check).
- Several minor updates of the network setup workflow (#292379).
- 2.15.33

-------------------------------------------------------------------
Wed Jul 18 10:54:26 CEST 2007 - locilka@suse.cz

- New progress and help messages when initializing the second
  stage (#292617).
- More debugging in switch_scr_finish.

-------------------------------------------------------------------
Thu Jul 12 12:59:32 CEST 2007 - locilka@suse.cz

- Client inst_productsources.ycp moved to yast2-packager.
- Changed link to list of servers in control file.
- Adjusted RPM dependencies.
- Installation sources are now Repositories.
- 2.15.32

-------------------------------------------------------------------
Wed Jul 11 09:09:58 CEST 2007 - locilka@suse.cz

- Changed default delete_old_packages to 'false'.

-------------------------------------------------------------------
Wed Jul  4 16:16:37 CEST 2007 - locilka@suse.cz

- Fixed workflow when user selects to Boot the installed system and
  then cancels that decision.
- 2.15.31

-------------------------------------------------------------------
Mon Jul  2 15:38:27 CEST 2007 - locilka@suse.cz

- Applied patch from sassmann@novell.com for PS3 support with
  576x384 resolution (#273147).

-------------------------------------------------------------------
Fri Jun 29 11:50:47 CEST 2007 - locilka@suse.cz

- Extended "Suggested Installation Sources" to support two levels
  of linking. First link contains list of links to be downloaded
  in order to get lists of suggested repositories.

-------------------------------------------------------------------
Thu Jun 28 21:34:19 CEST 2007 - jsrain@suse.cz

- updated for live CD installation

-------------------------------------------------------------------
Thu Jun 21 17:38:09 CEST 2007 - adrian@suse.de

- fix changelog entry order

-------------------------------------------------------------------
Thu Jun 21 10:34:10 CEST 2007 - locilka@suse.cz

- Added handling for "Suggested Installation Sources" during the
  first stage installation, initial evrsion (FATE #300898).
- Enhanced SCR-Switch installation-debugger.
- Added case-insensitive filter into the "Suggested Installation
  Sources" dialog.

-------------------------------------------------------------------
Wed Jun 20 13:12:10 CEST 2007 - locilka@suse.cz

- Fixed inst_license to really halt the system when license is
  declined (#282958).
- Fixed writing proxy settings during First-Stage Installation,
  Network Setup. Wrong Proxy::Import keys were used).
- Pre-selecting first connected network card in Network Card dialog
  in First-Stage Installation, Network Setup to avoid confusions.
- Fixed canceled Network Setup not to abort the entire
  installation.

-------------------------------------------------------------------
Fri Jun 15 14:34:01 CEST 2007 - locilka@suse.cz

- Fixing inst_addon_update_sources to initialize the target
  and sources before using Pkg:: builtins (#270899#c29).

-------------------------------------------------------------------
Thu Jun 14 11:28:26 CEST 2007 - locilka@suse.cz

- Enhanced network-test in the fist stage installation, three
  different servers are tested with 'ping' instead of only one.
- Current network settings are logged in case of failed network
  test (both #283841).
- Enhanced network-test in the fist stage installation, three
  different web-servers are tested with curl instead of only one.

-------------------------------------------------------------------
Wed Jun 13 15:44:05 CEST 2007 - locilka@suse.cz

- Implemented new feature that saves the content defined in control
  file from the installation system to the just installed system.
  Function, that does it, is SaveInstSysContent in SystemFilesCopy
  module (FATE #301937).
- Added new entry into the control file that defines what and where
  to save it, initially /root/ -> /root/inst-sys/.
- Adjusted control-file documentation.
- Fixed inst_restore_settings to start SuSEfirewall2_setup if it is
  enabled in the system init scripts to prevent from having
  half-started firewall after YOU kernel-update (#282871).

-------------------------------------------------------------------
Mon Jun 11 18:30:48 CEST 2007 - locilka@suse.cz

- Added lost fix from Andreas Schwab for startup scripts. The patch
  fixes evaluation of bash expressions.
- 2.15.30

-------------------------------------------------------------------
Mon Jun 11 17:55:23 CEST 2007 - locilka@suse.cz

- Adjusted SCR for install.inf to provide read/write access.
- Writing install.inf for save_network script at the end of
  the initial stage.
- Changed internal data structure for NetworkSetup in the initial
  stage.
- Added Internet test to the end of the NetworkSetup in the initial
  stage.
- 2.15.29

-------------------------------------------------------------------
Fri Jun  8 17:52:57 CEST 2007 - locilka@suse.cz

- Added initial implementation of possibility to setup network
  in the first stage installation. New YCP clients have beed added:
  inst_network_check and inst_network_setup. Scripts are called
  from inst_system_analysis before sources are initialized
  (FATE #301967).

-------------------------------------------------------------------
Thu Jun  7 15:08:08 CEST 2007 - locilka@suse.cz

- A new label "Writing YaST Configuration..." used in case of
  restarting system or installation.

-------------------------------------------------------------------
Fri Jun  1 12:41:10 CEST 2007 - mzugec@suse.cz

- use shared isNetworkRunning() function in network_finish
- 2.15.28

-------------------------------------------------------------------
Wed May 30 11:33:52 CEST 2007 - mzugec@suse.cz

- fixed spec requirements

-------------------------------------------------------------------
Mon May 28 16:02:38 CEST 2007 - mzugec@suse.cz

- removed netsetup item from control files

-------------------------------------------------------------------
Mon May 28 13:33:08 CEST 2007 - mzugec@suse.cz

- removed inst_netsetup item from control files

-------------------------------------------------------------------
Sun May 27 14:49:37 CEST 2007 - mzugec@suse.de

- installation network changes:
http://lists.opensuse.org/yast-devel/2007-05/msg00025.html
- 2.15.27

-------------------------------------------------------------------
Tue May 22 10:51:57 CEST 2007 - ug@suse.de

- reactivate hardware detection during autoinstall
- 2.15.26

-------------------------------------------------------------------
Mon May 21 10:40:20 CEST 2007 - locilka@suse.cz

- Fixed release-notes desktop file.
- 2.15.25

-------------------------------------------------------------------
Thu May 17 22:18:29 CEST 2007 - locilka@suse.cz

- Progress dialog for initializing installation sources.
- 2.15.24

-------------------------------------------------------------------
Tue May 15 14:14:13 CEST 2007 - locilka@suse.cz

- Changed control file in partitioning/evms_config section from
  'true' to 'false' (#274702).

-------------------------------------------------------------------
Fri May 11 16:30:06 CEST 2007 - locilka@suse.cz

- Removing directories '/var/lib/zypp/cache' and '/var/lib/zypp/db'
  if they exist at the beginning of the installation (#267763).
- 2.15.23

-------------------------------------------------------------------
Thu May 10 17:16:49 CEST 2007 - locilka@suse.cz

- Merged hardware probing (inst_startup) and system probing
  (inst_system_analysis) into one script to have only one progress
  dialog instead of two (#271291).
- openSUSE control file clean-up: The default value for enable_next
  and enable_back is 'yes'. Only few steps do not allow to go back
  (#270893).
- 2.15.22

-------------------------------------------------------------------
Wed May  9 10:25:37 CEST 2007 - locilka@suse.cz

- Safe qouting of bash command in desktop_finish.
- CommandLine for inst_release_notes (#269914).

-------------------------------------------------------------------
Mon May  7 13:43:54 CEST 2007 - ms@suse.de

- don't clobber existing /root/.vnc/passwd file (#271734)

-------------------------------------------------------------------
Wed Apr 18 09:13:10 CEST 2007 - locilka@suse.cz

- Root password dialog has been moved to be the first dialog of the
  second stage installation workflow (FATE #301924).
- "Root Password" step is now called "root Password" (#249706).
- Created new 'Check Installation' entry to the 'Configuration'
  part of the workflow. This section contains setting up network
  if needed, initializing target if needed, and installing
  remaining software (needed by FATE #301924).
- Added new client inst_initialization that creates initialization
  progress UI instead of blank screen.
- 2.15.20

-------------------------------------------------------------------
Tue Apr 17 11:11:37 CEST 2007 - locilka@suse.cz

- Fixed Add-On template to use generic 'control' textdomain
- 2.15.19

-------------------------------------------------------------------
Fri Apr 13 09:45:10 CEST 2007 - locilka@suse.cz

- Replacing networkmanager_proposal with general_proposal (network)
  that includes also IPv6 settings (#263337, #260261).

-------------------------------------------------------------------
Thu Apr 12 11:57:03 CEST 2007 - locilka@suse.cz

- Initialize the target and sources before adding extra sources.
  They needn't be initialized after YaST is restarted during the
  online update (#263289).

-------------------------------------------------------------------
Wed Apr 11 10:21:24 CEST 2007 - locilka@suse.cz

- Release Notes dialog is using a [Close] button if not running in
  installation (#262440).

-------------------------------------------------------------------
Fri Apr  6 16:48:58 CEST 2007 - locilka@suse.cz

- In case of reboot during installation, network services status
  is stored to a reboot_network_settings file and their status
  is restored again when starting the installation after reboot.
  Restoring the status uses Progress library for user feedback
  (#258742).
- Adjusted RPM dependencies.
- 2.15.18

-------------------------------------------------------------------
Thu Apr  5 13:34:48 CEST 2007 - locilka@suse.cz

- Using function PackagesUI::ConfirmLicenses() instead of
  maintaining own code with almost the same functionality (#256627)
- Adjusted RPM dependencies
- Unified inst_startup UI to use the Progress library instead of
  sequence of busy pop-ups.
- Unified inst_system_analysis UI to use the Progress library
  instead of empty dialog.
- 2.15.17

-------------------------------------------------------------------
Wed Apr  4 10:35:55 CEST 2007 - locilka@suse.cz

- Removed IPv6 proposal from installation control file. IPv6
  proposal has been merged into Network Mode proposal (#260261).

-------------------------------------------------------------------
Wed Mar 28 16:17:37 CEST 2007 - locilka@suse.cz

- Adjusted to use WorkflowManager instead AddOnProduct module
  in some cases to make Pattern-based installation and
  configuration workflow (FATE #129).
- Adjusted RPM dependencies and BuildRequires.
- 2.15.16

-------------------------------------------------------------------
Tue Mar 27 14:22:46 CEST 2007 - ms@suse.de

- fixed X11 preparation by checking /etc/reconfig_system (#252763)

-------------------------------------------------------------------
Wed Mar 21 16:47:14 CET 2007 - locilka@suse.cz

- Handling CloneSystem functionality when the client for cloning is
  not installed (checkbox is disabled).

-------------------------------------------------------------------
Mon Mar 19 13:09:57 CET 2007 - locilka@suse.cz

- Creating an empty /etc/sysconfig/displaymanager in desktop_finish
  if the sysconfing doesn't exist (minimal installation).
- Handling missing .proc.parport.devices agent (RPM recommends
  yast2-printer for that).

-------------------------------------------------------------------
Tue Mar 13 13:43:42 CET 2007 - locilka@suse.cz

- Reboot in case of the declined license during the initial
  installation (#252132).

-------------------------------------------------------------------
Mon Mar 12 08:44:19 CET 2007 - locilka@suse.cz

- Modules 'Product' and 'Installation' (installation settings) were
  moved from 'yast2-installation' to 'yast2' to minimize
  cross-package dependencies.
- Adjusted package dependencies.
- 2.15.15

-------------------------------------------------------------------
Fri Mar  9 10:05:20 CET 2007 - locilka@suse.cz

- Module InstShowInfo has been moved from yast2-installation to
  yast2-packager because this module is used by Add-Ons and
  installation sources only.
- Adjusted RPM Requires (yast2-packager >= 2.15.22).
- 2.15.14

-------------------------------------------------------------------
Thu Mar  8 16:59:35 CET 2007 - locilka@suse.cz

- Module GetInstArgs moved from yast2-installation to yast2, many
  clients required yast2-installation only because of this module.

-------------------------------------------------------------------
Thu Mar  8 14:45:39 CET 2007 - locilka@suse.cz

- Tag 'PATTERNS' in product content file is depracated by
  'REQUIRES' and/or 'RECOMMENDS' tag (#252122).

-------------------------------------------------------------------
Tue Mar  6 16:44:49 CET 2007 - kmachalkova@suse.cz

- Do not export LINES and COLUMNS variables, so that terminal
  resize event is handled correctly (#184179)

-------------------------------------------------------------------
Tue Mar  6 16:44:48 CET 2007 - locilka@suse.cz

- AddOnProduct and ProductLicense finally moved to yast2-packager
  from yast2-installation to avoid build cycles.
- 2.15.13

-------------------------------------------------------------------
Mon Mar  5 17:14:58 CET 2007 - locilka@suse.cz

- Moving AddOnProduct module back to yast2-installation because
  this module is needed in the second-stage installation.
- AddOnProduct-related testsuites moved back to yast2-installation.
- 2.15.12

-------------------------------------------------------------------
Mon Mar  5 12:58:21 CET 2007 - locilka@suse.cz

- Adding new installation client mouse_finish which is called
  before SCR is switched. This removes the dependency of
  yast2-installation on yast2-mouse.
- 2.15.11

-------------------------------------------------------------------
Fri Mar  2 15:27:14 CET 2007 - locilka@suse.cz

- Providing feedback (busy message) in inst_restore_settings.
  Starting network by calling 'network start' with timeout.
- Adding yast2-bootloader into required packages because it is
  needed after the SCR is switched into the installed system just
  before reboot (#249679).
- Added more logging into inst_system_analysis (booting installed
  system).
- 2.15.10

-------------------------------------------------------------------
Wed Feb 28 14:11:16 CET 2007 - jsrain@suse.cz

- added more logging to umount_finish (#247594)

-------------------------------------------------------------------
Mon Feb 26 16:03:42 CET 2007 - jsrain@suse.cz

- updated popup in case of license is not accepted (#162499)

-------------------------------------------------------------------
Thu Feb 22 13:52:12 CET 2007 - locilka@suse.cz

- Splitting installation_worker (main installation script) into
  inst_worker_initial and inst_worker_continue.
- Testsuites related to Add-Ons moved to yast2-add-on package.
- 2.15.9

-------------------------------------------------------------------
Wed Feb 21 17:24:30 CET 2007 - locilka@suse.cz

- Added documentation for silently_downgrade_packages and
  keep_installed_patches control file entries (plus their reverse
  lists) (FATE #301990, Bugzilla #238488).

-------------------------------------------------------------------
Mon Feb 19 16:00:23 CET 2007 - locilka@suse.cz

- More concrete fix of bug #160301: Displaying information about
  how to continue the second stage installation if SSH is the only
  installation method. This informational pop-up has disabled
  time-out (#245742).
- Moving parts of installation_worker script to includes based on
  in which installation stage they are used.

-------------------------------------------------------------------
Fri Feb 16 16:18:28 CET 2007 - locilka@suse.cz

- Add-Ons moved to a new package yast2-add-on-2.15.0 (#238673)

-------------------------------------------------------------------
Thu Feb 15 12:21:46 CET 2007 - locilka@suse.cz

- New entries silently_downgrade_packages, plus reverse list, and
  keep_installed_patches, plus reverse list, were added into SLES
  and SLED control files (FATE #301990, Bugzilla #238488).

-------------------------------------------------------------------
Mon Feb 12 13:40:41 CET 2007 - locilka@suse.cz

- Making release_notes modular.
- Rewriting RPM dependencies (#238679).
- Moving parts of installation_worker client into functions.
- Moving Mouse-init functions into inst_init_mouse client.
- Moving Storage-related functions (autoinstall) into
  inst_check_autoinst_mode client.
- Moving vendor client and desktop file to the yast2-update to
  minimize yast2-installation dependencies.
- Remove obsolete /proc/bus/usb mounting (#244950).

-------------------------------------------------------------------
Wed Feb  7 11:01:02 CET 2007 - locilka@suse.cz

- Correct Installation::destdir quoting in .local or .target bash
  commands.
- 2.15.8

-------------------------------------------------------------------
Tue Feb  6 16:29:55 CET 2007 - locilka@suse.cz

- Hide &product; in inst_suseconfig call to remove dependency on
  Product.ycp and not to be so ugly (#241553).

-------------------------------------------------------------------
Mon Feb  5 11:31:52 CET 2007 - locilka@suse.cz

- Store Add-Ons at the end of first stage installation and restore
  them before AutoYaST cloning at the end of the second stage
  installation (bugzilla #187558).
- Set license content before it is displayed for the first time,
  select license language before it is displayed (#220847).
- 2.15.7

-------------------------------------------------------------------
Fri Feb  2 15:25:04 CET 2007 - locilka@suse.cz

- Removing dependency on yast2-slp package.
- Moving all SLP-related functionality to yast2-packager-2.15.7.
- Handling not installed yast2-slp package in Add-Ons (#238680).

-------------------------------------------------------------------
Thu Feb  1 12:41:36 CET 2007 - locilka@suse.cz

- When an Add-On product is added and removed later, correctly
  remove also cached control file of that Add-On (#238307).
- 2.15.6

-------------------------------------------------------------------
Wed Jan 31 09:34:11 CET 2007 - locilka@suse.cz

- Rereading all SCR Agents in case of installation workflow changed
  by Add-On product (#239055).
- Calling PackageLock::Check before Pkg calls (#238556).

-------------------------------------------------------------------
Sun Jan 28 22:27:48 CET 2007 - locilka@suse.cz

- Removed tv and bluetooth hardware proposals from SLES control
  file. There are no such modules in that product (#238759).

-------------------------------------------------------------------
Mon Jan 22 13:46:20 CET 2007 - locilka@suse.cz

- Correct handling of CD/DVD Add-Ons in installation (#237264).
- Fixed switching between Installation Settings tabs in case of
  error in proposal. Every time, only the more-detailed tab is
  selected (#237291).
- Appropriate buttons for Add-Ons dialog for both dialog in
  installation workflow and installation proposal (#237297).
- 2.15.5

-------------------------------------------------------------------
Fri Jan 19 16:25:44 CET 2007 - locilka@suse.cz

- Fixed cancelling of entering a new Add-On (#236315).
- Added zFCP and DASD to installation/update proposal on S/390
  (jsrain) (#160399)
- 2.15.4

-------------------------------------------------------------------
Wed Jan 17 10:50:02 CET 2007 - locilka@suse.cz

- Changed control file documentation for Flexible Partitioning
  (bugzilla #229651 comment #15).
- Changed option <clone_module> "lan" to "networking" (#235457).

-------------------------------------------------------------------
Fri Jan 12 19:05:56 CET 2007 - ms@suse.de

- fixed TERM type setup in case of ssh based installations.
  if the installation is ssh based, TERM is not allowed to
  be overwritten by the value of install.inf. The TERM value
  of install.inf points to the console and not to the remote
  terminal type (#234032)

-------------------------------------------------------------------
Fri Jan 12 17:41:05 CET 2007 - locilka@suse.cz

- control file variable for monthly suse_register run (F#301822)
  (change made by jdsn)

-------------------------------------------------------------------
Thu Jan 11 10:59:40 CET 2007 - locilka@suse.cz

- Changed SLD and SLE control files to reflect demands described in
  bugzilla bug #233156:
  * Old packages are removed by default, only for upgrading from
    SLD 10 or SLE 10, packages are not removed by default.
  * New packages are selected for installation by default, only for
    upgrading from SLD 10 or SLE 10, packages are only updated.
  * Upgrading to new SLE 10 from is only supported from SLES9 and
    SLE 10, upgrading from another product will display warning.

-------------------------------------------------------------------
Sat Jan  6 19:32:23 CET 2007 - ms@suse.de

- fixed usage of fbiterm (#225229)

-------------------------------------------------------------------
Thu Jan  4 14:27:12 CET 2007 - locilka@suse.cz

- Added documentation for new features in control file:
  * boolean delete_old_packages and list of products for which this
    rule is inverted.
  * boolean only_update_selected and list of products for which
    this rule is inverted.
  * list of products supported for upgrade
  (All described in FATE #301844)

-------------------------------------------------------------------
Tue Jan  2 13:07:24 CET 2007 - locilka@suse.cz

- Allowing to add the very same product that has been already
  installed or selected for installation in case the url is
  different than any of the current urls. There can be more sources
  for the product because product urls can be removed and added
  also by inst_source module (#227605).
- Consistent spelling of "Add-On" and "add-on" (#229934).
- 2.15.3

-------------------------------------------------------------------
Tue Dec 12 10:57:21 CET 2006 - locilka@suse.cz

- Consistent spelling of 'AutoYaST' (#221275).

-------------------------------------------------------------------
Mon Dec 11 16:11:21 CET 2006 - locilka@suse.cz

- Handling new flag REGISTERPRODUCT from add-on product content
  file. This flag demands running the registration client after
  an add-on product is installed (on a running system) and demands
  running the registration client even if it is disabled in
  the base-product's control file (during installation)
  (FATE #301312).
- 2.15.2

-------------------------------------------------------------------
Thu Dec  7 18:28:21 CET 2006 - locilka@suse.cz

- Release Notes dialog in the second stage installation now offers
  to select a different language for release notes than the default
  one (#224875).

-------------------------------------------------------------------
Thu Dec  7 10:46:00 CET 2006 - locilka@suse.cz

- Reworked adding and removing Add-Ons during the first stage
  installation. If some Add-Ons are added or removed, the entire
  workflow is created from scratch (#221377).
- Using a separate temporary directory for Add-On licenses not to
  be confused by the previous Add-On.
- Fixed Second Stage Installation script to handle rebooting
  after kernel-patch correctly (#224251).
- Fixed Add-On handling when cancelling adding an Add-On product,
  before that return value from the previous adding was evaluated.
- Fixing some texts (#223880)
- 2.15.1

-------------------------------------------------------------------
Mon Dec  4 16:27:21 CET 2006 - locilka@suse.cz

- Adding support for own help texts for particular submodules in
  installation proposal (FATE #301151). Use key "help" in
  "MakeProposal"'s function result.
- Adding root_password_ca_check item into the globals of control
  file set to true for SLES and false otherwise (FATE #300438).
- A better fix for disabling [Back] button in License Agreement
  dialog when the previous (Language) dialog has been skipped
  (223258).
- 2.15.0

-------------------------------------------------------------------
Mon Dec  4 08:34:02 CET 2006 - lslezak@suse.cz

- "en_EN" -> "en_GB" in list of the preferred languages for EULA

-------------------------------------------------------------------
Thu Nov 23 11:10:14 CET 2006 - locilka@suse.cz

- Disabling [Back] button in License Agreement dialog when the
  previous (Language) dialog has been skipped (223258).
- 2.14.15

-------------------------------------------------------------------
Wed Nov 22 18:51:10 CET 2006 - ms@suse.de

- added hostname/IP information to Xvnc setup (#223266)
- fixed call of initvicons, deactivate s390 exception (#192052)
- 2.14.14

-------------------------------------------------------------------
Tue Nov 21 14:42:50 CET 2006 - locilka@suse.cz

- Reporting the failed or aborted installation only when it has
  been really aborted or when it really failed. YaST or system
  restarts on purpose (online update) are now handled correctly -
  there is no question whether user wants to continue with
  the installation (#222896).
- 2.14.13

-------------------------------------------------------------------
Mon Nov 20 15:25:11 CET 2006 - locilka@suse.cz

- Wider list of extra-sources 56->76 characters (#221984).
- Adding modules listed in Linuxrc entry brokenmodules into the
  /etc/modprobe.d/blacklist file (#221815).
- 2.14.12

-------------------------------------------------------------------
Mon Nov 20 11:49:53 CET 2006 - ms@suse.de

- fixed framebuffer color depth setup (#221139)
- 2.14.11

-------------------------------------------------------------------
Mon Nov 20 08:55:16 CET 2006 - locilka@suse.cz

- Show update-confirmation dialog in Mode::update() only (#221571).
- Pressing [Abort] button in the Add-On dialog during installation
  now opens-up a correct pop-up dialog with correct text (#218677).

-------------------------------------------------------------------
Wed Nov 15 15:30:03 CET 2006 - ms@suse.de

- fixed i810 based installation (#220403)
- 2.14.10

-------------------------------------------------------------------
Wed Nov 15 14:38:21 CET 2006 - locilka@suse.cz

- Defining the minimal size for release_notes pop-up to have the
  minimal size 76x22 or 3/4x2/3 in text mode and 100x30 in graphic
  mode (#221222).

-------------------------------------------------------------------
Wed Nov 15 11:40:48 CET 2006 - locilka@suse.cz

- Restoring the [ Next ] button in the inst_congratlate client when
  the [ Back ] button is pressed (#221190).

-------------------------------------------------------------------
Tue Nov 14 13:20:24 CET 2006 - locilka@suse.cz

- Changes in openSUSE control file (#219878):
  * limit_try_home: 5 GB -> 7 GB
  * root_base_size: 3 GB -> 5 GB

-------------------------------------------------------------------
Thu Nov  9 15:21:14 CET 2006 - locilka@suse.cz

- Always run the fonts_finish's Write() function. Skip running
  "SuSEconfig --module fonts" if script SuSEconfig.fonts does not
  exist (#216079).
- 2.14.9

-------------------------------------------------------------------
Thu Nov  9 10:22:00 CET 2006 - locilka@suse.cz

- Added confirmation dialog into the update workflow on the running
  system before the update really proceeds (#219097).
- confirmInstallation function moved from inst_doit to misc to make
  confirmation dialog possible (#219097).
- Set Product Name only when any Product Name found (#218720).
- 2.14.8

-------------------------------------------------------------------
Fri Nov  3 14:39:53 CET 2006 - locilka@suse.cz

- Preselecting already installed languages in the Language Add-On
  script (FATE #301239) (#217052).
- 2.14.7

-------------------------------------------------------------------
Fri Nov  3 10:17:37 CET 2006 - locilka@suse.cz

- Changed text of question asking whether the second stage
  installation should start again (FATE #300422) in case of
  previous failure or user-abort (#215697).

-------------------------------------------------------------------
Wed Nov  1 17:43:41 CET 2006 - locilka@suse.cz

- "Installation->Other->Boot Installed System->Cancel" now doesn't
  abort the installation but returns to the Installation Mode
  dialog (#216887).
- Correct handling of pressing Cancel or Abort buttons in pop-up
  windows in Add-On installation (#216910).

-------------------------------------------------------------------
Mon Oct 30 15:10:07 CET 2006 - lslezak@suse.cz

- updated inst_extrasources client to not download files from the
  installation sources (#213031)
- requires yast2-pkg-bindings >= 2.13.101
- 2.14.6

-------------------------------------------------------------------
Mon Oct 30 12:59:31 CET 2006 - locilka@suse.cz

- Moving ProductFeatures::Save() from inst_kickoff client to
  save_config_finish - client that is called after the SCR is
  switched to the running system (#209119).
- Calling Storage::RemoveDmMapsTo (device) in after the disks are
  probed in inst_system_analysis (#208222).
- Fixed including packager.

-------------------------------------------------------------------
Thu Oct 26 14:51:12 CEST 2006 - locilka@suse.cz

- Enabling back button in the License Agreement dialog (#215236).
- Adding add-on.rnc for AutoYaST profile validation (#215248).
- Providing an easier switch to disable IPv6 by a new ipv6 client
  in the network proposal (FATE #300604) (mzugec).
- 2.14.5

-------------------------------------------------------------------
Wed Oct 25 16:28:14 CEST 2006 - locilka@suse.cz

- Adding more debugging messages in order to fix random crashing
  of the second stage installation (#214886).

-------------------------------------------------------------------
Tue Oct 24 13:57:57 CEST 2006 - locilka@suse.cz

- Renamed control file control.PROF.xml to control.openSUSE.xml

-------------------------------------------------------------------
Tue Oct 24 10:58:18 CEST 2006 - ms@suse.de

- fixed nic detection (#213870)

-------------------------------------------------------------------
Mon Oct 23 16:04:30 CEST 2006 - locilka@suse.cz

- Added special installation client for Language Add-Ons
  inst_language_add-on and it's XML workflow
  add-on-template_installation.xml for calling this client after
  the Add-On Product is added by the add-on client (FATE #301239).
- Adding add-on client to list of clients that are enabled for
  AutoYaST cloning (bugzilla #198927).
- Added summary of the Release Notes client for the Control Center
  (bugzilla #213878).
- 2.14.4

-------------------------------------------------------------------
Wed Oct 18 16:13:12 CEST 2006 - locilka@suse.cz

- Added a life-belt into the second stage installation. It can be
  restarted under these circumstances:

1.) User aborts the installation
  2.) Installation process is killed during the installation
  3.) Computer is restarted during the installation (reset)

The very next time the system is restarted. YaST starts and
  informs user that the previous installation was aborted/failed.
  Then users are asked whether they want to rerun the second stage
  installation (FATE #300422).

- Fixed setting own Y2MAXLOGSIZE up in order to save memory
  requirements during the first stage installation.
- 2.14.3

-------------------------------------------------------------------
Mon Oct 16 13:18:43 CEST 2006 - locilka@suse.cz

- Timeout license in AutoYaST after 2 seconds (#206706).
  This solution doesn't break ncurses.
- 2.14.2

-------------------------------------------------------------------
Mon Oct 16 12:24:10 CEST 2006 - fehr@suse.de

- added new configurable values for LVM/EVMS based proposals
  (feature 300169)
- change evms_config to true

-------------------------------------------------------------------
Mon Oct 16 11:12:51 CEST 2006 - ms@suse.de

- disable oom-killing for X-Server process (#211860)

-------------------------------------------------------------------
Thu Oct 12 16:28:07 CEST 2006 - locilka@suse.cz

- Handle Installation::destdir in *.bash properly (#211576).
- 2.14.1

-------------------------------------------------------------------
Mon Oct  9 16:52:14 CEST 2006 - locilka@suse.cz

- Merged SLES10 SP1 branch to openSUSE 10.2.
- 2.14.0

-------------------------------------------------------------------
Mon Oct  9 09:33:31 CEST 2006 - locilka@suse.cz

- Remove old eula.txt and then copy new one if exists (#208908).
- Using the fullscreen mode again, background images temporarily
  removed from the RPM build (#208307).
- The default "Other Option" is Repair, not Boot (#208841).
- Removed some unneeded imports from inst_clients.
- 2.13.159

-------------------------------------------------------------------
Mon Oct  2 16:44:25 CEST 2006 - locilka@suse.cz

- Merged proofread texts
- 2.13.158

-------------------------------------------------------------------
Mon Oct  2 11:06:29 CEST 2006 - lslezak@suse.cz

- inst_extrasources.ycp - fixed name of the text domain
- 2.13.157

-------------------------------------------------------------------
Wed Sep 27 15:22:15 CEST 2006 - lslezak@suse.cz

- new inst_extrasources.ycp client - add extra installation sources
  during installation (in 2nd stage, after online update)
  (fate #100168, #300910)
- 2.13.156

-------------------------------------------------------------------
Wed Sep 27 09:58:53 CEST 2006 - locilka@suse.cz

- YCP modules that originated at yast2-packager were moved back.
- Usage of dgettext replaced with standard gettext strings.
- Removed yast2-slp and yast2-firewall from build-requirements.
- 2.13.155

-------------------------------------------------------------------
Mon Sep 25 17:45:54 CEST 2006 - locilka@suse.cz

- New icon for Hardware Proposal.
- Root Password dialog moved before Hostname and Domain Name
  (#208032).

-------------------------------------------------------------------
Mon Sep 25 13:21:35 CEST 2006 - locilka@suse.cz

- A bit rewritten code for language selected for second stage of
  update (FATE #300572). Mode::Set is now called before Mode::Get.
- New installation images from jimmac (#203510).
- Timeout and accept the license dialog when installing using
  AutoYaST. By defualt, it's 8 seconds (#206706).
- New busy message when finishing the installation (closing
  sources, etc.).
- 2.13.154

-------------------------------------------------------------------
Mon Sep 25 10:59:16 CEST 2006 - jsrain@suse.cz

- check properly for existing files in /proc (#205408)

-------------------------------------------------------------------
Fri Sep 22 16:01:25 CEST 2006 - jsuchome@suse.cz

- Remember the selected language for update and use it also in the
  second stage (FATE #300572).
- 2.13.153

-------------------------------------------------------------------
Fri Sep 22 14:14:44 CEST 2006 - lslezak@suse.cz

- x11_finish.ycp - removed workaround for #201121

-------------------------------------------------------------------
Fri Sep 22 09:35:36 CEST 2006 - locilka@suse.cz

- Fixed starting Installation in window: Exception for PPC, 832x624
  still runs in fullscreen. Fixed using a fallback image when
  the current resolution is not supported (#207321).
- Fixed counting offset for installation in window. Exceptions are
  now handled correctly (#207310).
- Changed fallback background image - a pure black suits better.
- Visual speeding-up initializing the installation - adding
  a wrapper installation.ycp around installation_worker.ycp client
  to provide UI ASAP.

-------------------------------------------------------------------
Thu Sep 21 16:36:42 CEST 2006 - ms@suse.de

- added patch from Olaf Hering to remove the DefaultColorDepth
  for special fb devices which are not VESA VGA (#207338)

-------------------------------------------------------------------
Tue Sep 19 17:14:28 CEST 2006 - locilka@suse.cz

- Removed Installation background 1600x800 px.
- Added installation background 1280x800 px.

-------------------------------------------------------------------
Mon Sep 18 09:53:18 CEST 2006 - locilka@suse.cz

- Icon for release notes (inst_release_notes).
- List of available SLP sources based on Product Name (SLP label),
  also with filter when more than 15 sources are listed
  (FATE #300619).
- Added background images for installation (thanks to jimmac)
  [1024x768, 1280x1024, 1400x1050, 1600x800, 1600x1200] (Bugzilla
  #203510).
- Replacing "Product %1" with "%1" for list of selected Add-On
  products - the column is already called "Product".
- 2.13.152

-------------------------------------------------------------------
Thu Sep 14 14:45:54 CEST 2006 - locilka@suse.cz

- Finally! Corrected path for importing user-related data to the
  just installed system (FATE #120103, comments #17, #18).

-------------------------------------------------------------------
Thu Sep 14 00:46:19 CEST 2006 - ro@suse.de

- added yast2-core-devel to BuildRequires

-------------------------------------------------------------------
Wed Sep 13 09:27:51 CEST 2006 - locilka@suse.cz

- Calling languages.ycp client has been changed to a function call
  Language::GetLanguagesMap (#204791).
- Added new Requirement: yast2-country >= 2.13.35
- Calling copy_systemfiles_finish from inst_finish (FATE #300421).
- New icon for Finishing Basic Installation dialog.
- Calling new pre_umount_finish client before umount_finish,
  umount_finish closes SCR (#205389).
- Correctly quote files that are added into the temporary archive
  (FATE #300421).
- Removing the leading slashes from filenames when archiving them.
- Reporting error (into log) if save_hw_status_finish.ycp goes
  wrong (partly fixed #205408).
- 2.13.151

-------------------------------------------------------------------
Tue Sep 12 18:40:34 CEST 2006 - locilka@suse.cz

- Found a better place for calling 'inst_pre_install' client, by
  now it is really called...
- Enhanced logging.
- Disabling the License Language combo-box in case of less than
  two languages in it (#203543).

-------------------------------------------------------------------
Tue Sep 12 17:07:19 CEST 2006 - locilka@suse.cz

- Fixed displaying license: Language name should always be either
  shown or the license is disabled as invalid; If there are both
  license.en.txt and license.txt, one of them is hidden because
  they have the very same content; An installation language is also
  pre-selected as a language for a license (if such exists).
- Fixed initializing the known languages via WFM::call("languages")
  (#204791).
- Another icon for Installation Mode dialog, it was the same as for
  Initialization and Analyzing the Computer dialogs.
- 2.13.150

-------------------------------------------------------------------
Mon Sep 11 09:59:15 CEST 2006 - locilka@suse.cz

- Added 'inst_pre_install' and 'copy_systemfiles_finish' clients,
  and module 'SystemFilesCopy' as a solution for FATE requests
  #300421 and #120103, which means that SSH keys are, by now,
  copied from another already installed system (if such exists).
  If there are more installed systems, the best ones are selected
  considering the newest access-time.
- More verbose dialog when initializing the installation (+icon).

-------------------------------------------------------------------
Thu Sep  7 15:13:54 CEST 2006 - locilka@suse.cz

- Added dialog content and help into the initial dialog of add-on
  client. Progress will be even better.
- Temporarily disabled buttons that don't work there.
- Added more "busy messages" into the add-on dialogs.
- Added new functionality for filtering services in SLP services
  table. Allowed characters are "a-zA-Z0-9 .*-".

-------------------------------------------------------------------
Wed Sep  6 17:41:07 CEST 2006 - mvidner@suse.cz

- To allow adding unsigned sources, temporarily "rug set-pref
  security-level none" when syncing in inst_source (#190403).
- 2.13.149

-------------------------------------------------------------------
Wed Sep  6 12:47:51 CEST 2006 - locilka@suse.cz

- No such headline "Mode" in the Installation Settings dialog.
  Help fixed (#203811).
- Added help into the Add-On Product Installation dialog.
- Add and Delete buttons in the same dialog were moved to the left
  side according the YaST style guide.
- Disabling Delete button in case of no Products listed
  (all filed as bug #203809).
- Used a correct (another) icon in License Agreement dialog
  (#203808).

-------------------------------------------------------------------
Mon Sep  4 15:59:47 CEST 2006 - locilka@suse.cz

- Running Installation in Wizard Window (#203510).
- Needed binaries in inst-sys: xquery and fvwm-root.
- Initially, a plain colored image is used as a background.
- 2.13.148

-------------------------------------------------------------------
Mon Sep  4 15:49:40 CEST 2006 - ms@suse.de

- fixed -fp setup of Xvnc (#203531)

-------------------------------------------------------------------
Fri Sep  1 08:48:50 CEST 2006 - locilka@suse.cz

- Fixed Installation Mode dialog to redraw itself only when needed.

-------------------------------------------------------------------
Wed Aug 23 16:59:03 CEST 2006 - locilka@suse.cz

- Added a new debugger tool scr_switch_debugger.ycp that is called
  when switching to the installed system in switch_scr_finish.ycp
  fails (#201058).
- Additionally, YaST logs from installed system are stored under
  the /var/log/YaST2/InstalledSystemLogs/ directory.
- 2.13.147

-------------------------------------------------------------------
Wed Aug 23 16:44:18 CEST 2006 - jsrain@suse.cz

- use version specific Xvnc parameters
- 2.13.146

-------------------------------------------------------------------
Wed Aug 23 13:05:35 CEST 2006 - jsrain@suse.cz

- temporary fix to copy /etc/X11/xorg.conf to the system during
  installation (#201121)
- 2.13.145

-------------------------------------------------------------------
Tue Aug 22 19:26:28 CEST 2006 - mvidner@suse.cz

- test_proposal and test_inst_client: also call
  Mode::SetMode ("installation");

-------------------------------------------------------------------
Tue Aug 22 14:27:53 CEST 2006 - locilka@suse.cz

- New Installation Mode dialog (#156529)
- 2.13.144

-------------------------------------------------------------------
Tue Aug 22 13:41:54 CEST 2006 - jsrain@suse.cz

- weaken dependency on suseRegister (#183656)

-------------------------------------------------------------------
Fri Aug 18 09:49:41 CEST 2006 - jsrain@suse.cz

- fixed building documentation
- 2.13.143

-------------------------------------------------------------------
Thu Aug 10 11:18:24 CEST 2006 - jsrain@suse.cz

- fixed congratulation text for openSUSE (#198252)
- 2.13.142

-------------------------------------------------------------------
Wed Aug  9 15:30:57 CEST 2006 - jsrain@suse.cz

- read info about products from package manager without parsing all
  metadata and reading RPM database (#66046)
- added unzip to Requires (#195911)

-------------------------------------------------------------------
Tue Aug  8 09:54:38 CEST 2006 - jsrain@suse.cz

- fixed 'Requires'
- 2.13.141

-------------------------------------------------------------------
Fri Aug  4 16:33:11 CEST 2006 - jsrain@suse.cz

- updated for X.Org 7
- 2.13.140

-------------------------------------------------------------------
Fri Aug  4 09:21:28 CEST 2006 - jsrain@suse.cz

- moved SLP source scanning to SourceManager.ycp

-------------------------------------------------------------------
Wed Aug  2 14:10:41 CEST 2006 - mvidner@suse.cz

- Added a configure-time check for fvwm directory

-------------------------------------------------------------------
Fri Jul 28 09:42:00 CEST 2006 - jsrain@suse.cz

- offer to eject the CD drive when asking for add-on CD (#181992)

-------------------------------------------------------------------
Thu Jul 27 14:18:01 CEST 2006 - jsrain@suse.cz

- added support for merging multiple proposal items as one proposal
  item (eg. to group langage and keyboard)
- 2.13.139

-------------------------------------------------------------------
Wed Jul 26 09:18:36 CEST 2006 - jsrain@suse.cz

- get version from installed product proper way (#157924)

-------------------------------------------------------------------
Tue Jul 25 14:32:18 CEST 2006 - jsrain@suse.cz

- beep before rebooting the machine during installation (#144614)

-------------------------------------------------------------------
Mon Jul 24 13:56:22 CEST 2006 - jsrain@suse.cz

- fixed error reporting when creating a source (#159695)
- abort installation if package manager initialization fails
  (#167674)
- report proper message if no catalog found via SLP and firewall
  is running (#156444)

-------------------------------------------------------------------
Tue Jul 18 16:57:08 CEST 2006 - jsrain@suse.cz

- fixed displaying catalog selection dialog if multiple catalogs
  found on add-on media (#192761)

-------------------------------------------------------------------
Tue Jul 18 16:14:17 CEST 2006 - jsrain@suse.cz

- fixed vendor URL in congratulate dialog (#187358)
- 2.13.138

-------------------------------------------------------------------
Mon Jul 17 10:12:58 CEST 2006 - jsrain@suse.cz

- check if there are any patches available before offering online
  update (jsuchome)
- merged inst_default_desktop.ycp to desktop_finish.ycp

-------------------------------------------------------------------
Sun Jul 16 08:54:55 CEST 2006 - olh@suse.de

- introduce a Linuxrc::display_ip and use it instead of Arch::s390
- 2.13.137

-------------------------------------------------------------------
Fri Jul 14 15:16:00 CEST 2006 - jsrain@suse.cz

- adapted to changes in yast2-packager
- use only one implementation of product license handling (#191523)
- 2.13.136

-------------------------------------------------------------------
Fri Jul 14 14:51:37 CEST 2006 - olh@suse.de

- move /tmp/vncserver.log to /var/log/YaST2/vncserver.log

-------------------------------------------------------------------
Mon Jul 10 10:47:57 CEST 2006 - jsrain@suse.cz

- correctly import add-on product control file even if no
  additional YaST modules are present on the media (#185768)
- 2.13.135

-------------------------------------------------------------------
Mon Jul 10 09:23:29 CEST 2006 - mvidner@suse.cz

- When running Novell Customer Center Configuration the second time,
  do not add duplicate update sources for graphic card drivers
  (#188572).
- 2.13.134

-------------------------------------------------------------------
Fri Jun 30 11:42:11 CEST 2006 - ug@suse.de

- during autoinstall, timeout early warning popups

-------------------------------------------------------------------
Tue Jun 27 14:02:45 CEST 2006 - mvidner@suse.cz

- Don't show the URL passwords in registration success popup (#186978).
- Include the password in URLs passed to ZMD (#186842).
- Don't log the URL passwords.
- 2.13.133

-------------------------------------------------------------------
Mon Jun 26 08:54:43 CEST 2006 - jsrain@suse.cz

- preselect patterns according to selected desktop (#183944)

-------------------------------------------------------------------
Wed Jun 21 11:03:58 CEST 2006 - jsrain@suse.cz

- display the source URL dialog if adding add-on product update
  source fails in order to allow to enter password (#186804)

-------------------------------------------------------------------
Tue Jun 20 14:50:48 CEST 2006 - mvidner@suse.cz

- When registration succeeds, display only the actually added sources
(#180820#c26).

-------------------------------------------------------------------
Tue Jun 20 14:35:15 CEST 2006 - jsrain@suse.cz

- translate the congratulate string (#186567)

-------------------------------------------------------------------
Mon Jun 19 14:05:21 CEST 2006 - jsrain@suse.cz

- report an error when failed to register the update source for
  an add-on product (#185846)
- 2.13.132

-------------------------------------------------------------------
Mon Jun 19 12:54:36 CEST 2006 - jsrain@suse.cz

- ask about accepting license of add-on product added via the
  /add_on_product file (#186148)
- 2.13.131

-------------------------------------------------------------------
Thu Jun 15 18:47:05 CEST 2006 - mvidner@suse.cz

- Do not complain if ZMD cannot be stopped (#166900).
- When syncing the _original_ installation sources to ZMD,
  temporarily turn off signature checking because the user has
  already decided to trust the sources (#182747).
- SourceManager: factored out the rug pathname.
- 2.13.130

-------------------------------------------------------------------
Thu Jun 15 12:45:27 CEST 2006 - jsrain@suse.cz

- set installation server as host name (not IP address) if it is
  defined as host name during installation (#178933)
- 2.13.129

-------------------------------------------------------------------
Thu Jun 15 10:20:39 CEST 2006 - visnov@suse.cz

- fix the please-wait string

-------------------------------------------------------------------
Wed Jun 14 15:07:04 CEST 2006 - jdsn@suse.de

- added a please-wait string in registration (already translated)
- 2.13.128

-------------------------------------------------------------------
Mon Jun 12 16:07:52 CEST 2006 - mvidner@suse.cz

- Fillup /etc/sysconfig/security:CHECK_SIGNATURES and initialize it
  based on an install time kernel parameter.
- 2.13.127

-------------------------------------------------------------------
Mon Jun 12 13:22:08 CEST 2006 - jdsn@suse.de

- run pango module creation as root (#165891)
- fixed SLE desktop file of suse_register for autoyast (mc, ug)
- 2.13.126

-------------------------------------------------------------------
Fri Jun  9 11:02:57 CEST 2006 - locilka@suse.cz

- Identify the downloaded release notes by the product name during
  the internet test. Changes were made in the module Product
  (#180581).
- 2.13.125

-------------------------------------------------------------------
Thu Jun  8 11:49:04 CEST 2006 - jdsn@suse.de

- create pango modules for registration browser (#165891)
- sync zypp update sources in autoyast mode as well (#181183)
- 2.13.124

-------------------------------------------------------------------
Wed Jun  7 16:15:36 CEST 2006 - jsrain@suse.cz

- avoid adding update source of an add-on product twice during
  installation (#182434)
- 2.13.123

-------------------------------------------------------------------
Tue Jun  6 18:56:57 CEST 2006 - mvidner@suse.cz

- Moved SourceManager + deps from yast2-packager to yast2-installation
  to avoid circular BuildRequires.
- 2.13.122

-------------------------------------------------------------------
Tue Jun  6 18:32:04 CEST 2006 - mvidner@suse.cz

- Call suse_register with --nozypp meaning that we will tell rug
  ourselves which zypp/yum sources it should add. This enables
  rejecting broken or untrusted sources (#180820).
- Moved the major part of Register::add_update_sources to
  SourceManager::AddUpdateSources.
- 2.13.121

-------------------------------------------------------------------
Tue Jun  6 09:53:16 CEST 2006 - jsrain@suse.cz

- sync add-on product source to ZMD (#181743)
- 2.13.120

-------------------------------------------------------------------
Thu Jun  1 17:57:23 CEST 2006 - mvidner@suse.cz

- Do log Report::{Message,Warning,Error} messages by default (#180862).
- 2.13.119

-------------------------------------------------------------------
Thu Jun  1 14:55:44 CEST 2006 - jsrain@suse.cz

- honor UPDATEURLS if installing add-on product in running system
  (#180417)
- 2.13.118

-------------------------------------------------------------------
Wed May 31 12:58:33 CEST 2006 - jsrain@suse.cz

- avoid calling Pkg::SourceStartCache during 1st stage of the
  installation (#178007)
- 2.13.117

-------------------------------------------------------------------
Tue May 30 18:02:54 CEST 2006 - jdsn@suse.de

- set correct title of installation step Customer Center (#179921)
- 2.13.116

-------------------------------------------------------------------
Fri May 26 14:27:56 CEST 2006 - jsrain@suse.cz

- fixed behavior if SLP source detection fails (#179036)
- 2.13.115

-------------------------------------------------------------------
Thu May 25 08:46:56 CEST 2006 - jsrain@suse.cz

- added possibility to specify add-on product URL as command-line
  parameter of add-on.ycp (to run add-on product workflow via
  autorun.sh)
- 2.13.114

-------------------------------------------------------------------
Wed May 24 12:52:21 CEST 2006 - jsrain@suse.cz

- properly integrate YCP code for add-on product installation in
  running system (if YCP code present) (#178311)
- 2.13.113

-------------------------------------------------------------------
Tue May 23 18:58:20 CEST 2006 - jdsn@suse.de

- gray out checkboxes in inst_suse_register when skipping (#178042)
- 2.13.112

-------------------------------------------------------------------
Tue May 23 15:07:42 CEST 2006 - jsrain@suse.cz

- added different desktop files for SLE and BOX/openSUSE
- 2.13.111

-------------------------------------------------------------------
Tue May 23 13:20:03 CEST 2006 - jdsn@suse.de

- fixed layouting in inst_ask_online_update (#177559)

-------------------------------------------------------------------
Fri May 19 17:57:10 CEST 2006 - jdsn@suse.de

- let inst_suse_register ask to install mozilla-xulrunner if
  missing (#175166)
- prevent non-root user to run inst_suse_register (#170736)
- 2.13.110

-------------------------------------------------------------------
Fri May 19 15:36:36 CEST 2006 - jsrain@suse.cz

- more verbose logging of storing hardware status (#170188)
- 2.13.109

-------------------------------------------------------------------
Thu May 18 17:07:13 CEST 2006 - hare@suse.de

- start iscsid if root is on iSCSI (#176804)

-------------------------------------------------------------------
Wed May 17 13:08:52 CEST 2006 - jsrain@suse.cz

- set DISPLAYMANAGER_SHUTDOWN according to control file (#169639)
- 2.13.108

-------------------------------------------------------------------
Tue May 16 13:29:38 CEST 2006 - jsrain@suse.cz

- marked missed text for translation (#175930)
- 2.13.107

-------------------------------------------------------------------
Mon May 15 12:59:58 CEST 2006 - jsrain@suse.cz

- handle additional data for installation restart (#167561)

-------------------------------------------------------------------
Fri May 12 14:11:18 CEST 2006 - jsrain@suse.cz

- initialize callbacks before adding an add-on product, properly
  handle installation sources of add-on products (both if preparing
  AutoYaST configuration (#172837)
- 2.13.106

-------------------------------------------------------------------
Thu May 11 13:50:29 CEST 2006 - jsrain@suse.cz

- do not disable automatic modprobe before adding add-on products
  (#172149)
- 2.13.105

-------------------------------------------------------------------
Thu May 11 12:02:13 CEST 2006 - ms@suse.de

- fixed message text (#172766)

-------------------------------------------------------------------
Thu May 11 09:55:08 CEST 2006 - ms@suse.de

- prevent ssh message from being displayed if vnc+ssh has
  been specified as installation method (#173486)

-------------------------------------------------------------------
Wed May 10 13:40:16 CEST 2006 - jdsn@suse.de

- removed search bar from registration browser (#169092)
- 2.13.104

-------------------------------------------------------------------
Tue May  9 19:35:47 CEST 2006 - jdsl@suse.de

- switched to Enterprise wording for inst_suse_register (#173970)
- 2.13.103

-------------------------------------------------------------------
Tue May  9 19:30:47 CEST 2006 - mvidner@suse.cz

- Save the update sources if registration is done later after the
  installation (#172665).
- When adding upate sources, do not add duplicates (check by the alias
  passed by suse_register on SLE), delete the duplicate beforehand
  (#168740#c3).
- 2.13.102

-------------------------------------------------------------------
Tue May  9 11:32:20 CEST 2006 - mvidner@suse.cz

- Start the network also when doing a remote X11 installation (#165458,
  hare).
- 2.13.101

-------------------------------------------------------------------
Mon May  8 17:32:59 CEST 2006 - jdsl@suse.de

- added hard require from y2-installation to suseRegister (hmuelle)
- added new w3m-jail for registration (#167225)
- fixed passing of url to browser(s) for registration (#167225)
- switched to Enterprise strings for inst_suse_register (shorn)
- 2.13.100

-------------------------------------------------------------------
Thu May  4 14:31:29 CEST 2006 - jsrain@suse.cz

- added congratulate text to the control file (#170881)
- 2.13.99

-------------------------------------------------------------------
Thu May  4 13:10:48 CEST 2006 - jsrain@suse.cz

- disable timeout in popup before installation reboot in case
  of SSH installation (#160301)

-------------------------------------------------------------------
Thu May  4 11:21:32 CEST 2006 - locilka@suse.cz

- include proofread message texts

-------------------------------------------------------------------
Wed May  3 10:26:29 CEST 2006 - locilka@suse.cz

- Busy cursor when "Contacting server" in suse_register (#171061).
- 2.13.97

-------------------------------------------------------------------
Tue May  2 15:25:35 CEST 2006 - locilka@suse.cz

- Display KDE-related help in the Congratulations dialog only
  in case of KDE as the default windowmanager (#170880).
- 2.13.96

-------------------------------------------------------------------
Fri Apr 28 14:10:50 CEST 2006 - locilka@suse.cz

- Proper checking for available network when adding an Add-On
  product. Network-related options are disabled in case of missing
  network both in installation and running system (#170147).
- 2.13.95

-------------------------------------------------------------------
Fri Apr 28 11:32:03 CEST 2006 - jsuchome@suse.cz

- initialize package callbacks for add on product workflow (#170317)
- 2.13.94

-------------------------------------------------------------------
Thu Apr 27 16:50:50 CEST 2006 - mvidner@suse.cz

- Tell libzypp-zmd-backend not to write sources to zypp db,
  we are going to do it ourselves (#170113).
- 2.13.93

-------------------------------------------------------------------
Thu Apr 27 16:03:39 CEST 2006 - jsrain@suse.de

- handle missing SHORTLABEL in content file (#170129)
- 2.13.92

-------------------------------------------------------------------
Thu Apr 27 14:57:23 CEST 2006 - fehr@suse.de

- set limit for separate /home to 14G for SLED (#169232)

-------------------------------------------------------------------
Thu Apr 27 11:16:56 CEST 2006 - ms@suse.de

- removed update_xf86config call, checking for /dev/psaux was
  broken and is no longer needed because the default mouse device
  is /dev/input/mice since many versions now (#168816)

-------------------------------------------------------------------
Thu Apr 27 10:52:08 CEST 2006 - mvidner@suse.cz

- When asking for update URLs, go trough products, not patterns (#169836).
- 2.13.91

-------------------------------------------------------------------
Thu Apr 27 08:34:33 CEST 2006 - locilka@suse.cz

- Making "SLP Catalog" selection bigger (maximum ncurses size)
  (#168718)
- 2.13.90

-------------------------------------------------------------------
Tue Apr 25 22:58:52 CEST 2006 - jsrain@suse.de

- fixed service proposal in SLES control file (#159771)

-------------------------------------------------------------------
Tue Apr 25 16:19:11 CEST 2006 - locilka@suse.cz

- Return `next instead of `ok in case of SLP Add-On Source (#165989)
- 2.13.89

-------------------------------------------------------------------
Mon Apr 24 16:22:14 CEST 2006 - jsrain@suse.de

- GDM is default if both KDE and GNOME installed (#155095)
- 2.13.88

-------------------------------------------------------------------
Mon Apr 24 13:30:50 CEST 2006 - sh@suse.de

- V 2.13.87
- Removed "Disagree with all" button (bug #163001)

-------------------------------------------------------------------
Mon Apr 24 12:35:52 CEST 2006 - ug@suse.de

- 2.13.86

-------------------------------------------------------------------
Mon Apr 24 11:52:47 CEST 2006 - ug@suse.de

- X-SuSE-YaST-AutoInstRequires=lan
  added to desktop file of suse register.
  Otherwise the registration fails.

-------------------------------------------------------------------
Mon Apr 24 09:37:57 CEST 2006 - lnussel@suse.de

- run rcSuSEfirewall2 reload when installing via vnc or ssh (#153467)
- 2.13.85

-------------------------------------------------------------------
Fri Apr 21 23:26:26 CEST 2006 - jsrain@suse.de

- determine base product accordign to flag (#160585)
- 2.13.84

-------------------------------------------------------------------
Fri Apr 21 17:26:15 CEST 2006 - jdsn@suse.de

- added proxy support for registration browser (#165891)
- 2.13.83

-------------------------------------------------------------------
Thu Apr 20 22:22:59 CEST 2006 - jsrain@suse.de

- handle installation restart with repeating last step (#167561)
- 2.13.82

-------------------------------------------------------------------
Thu Apr 20 18:51:55 CEST 2006 - jdsn@suse.de

- proxy support for registration process (#165891)
- disable w3m registration by control variable (aj)
- 2.13.81

-------------------------------------------------------------------
Thu Apr 20 16:09:23 CEST 2006 - mvidner@suse.cz

- When cloning, save installation sources beforehand (#165860).
- 2.13.80

-------------------------------------------------------------------
Wed Apr 19 19:55:47 CEST 2006 - jsrain@suse.de

- restore buttons after calling DASD or zFCP module (#160399)
- 2.13.79

-------------------------------------------------------------------
Wed Apr 19 15:04:03 CEST 2006 - locilka@suse.cz

- Added more debugging messages to the inst_proposal (#162831)
- 2.13.78

-------------------------------------------------------------------
Tue Apr 18 22:58:41 CEST 2006 - jsrain@suse.de

- display proper popup when aborting add-on product installation
  (#159689)

-------------------------------------------------------------------
Tue Apr 18 22:22:02 CEST 2006 - jdsn@suse.de

- in inst_suse_register:
- busy/waiting popups (#163366, #164794)
- text changes (#165509)
- autodisable checkbox "Registration Code" (# 165841)
- error handling in case no browser is available
- cleanup
- 2.13.77

-------------------------------------------------------------------
Tue Apr 18 21:44:45 CEST 2006 - jsrain@suse.de

- do not initialize catalogs before booting installed system (#162899)
- 2.13.76

-------------------------------------------------------------------
Tue Apr 18 18:08:18 CEST 2006 - mvidner@suse.cz

- Do not try to add empty URL as an update source (#165860#c12).

-------------------------------------------------------------------
Tue Apr 18 17:02:05 CEST 2006 - mvidner@suse.cz

- Fixed a typo in the previous change.
- 2.13.75

-------------------------------------------------------------------
Tue Apr 18 14:06:21 CEST 2006 - locilka@suse.cz

- Add-On SLP source was allways returning `back also in case
  of `ok (`next) (#165989)
- 2.13.74

-------------------------------------------------------------------
Tue Apr 18 10:12:19 CEST 2006 - mvidner@suse.cz

- Skip popup and unnecessary work if there are no online update
  sources for add-ons (#167233).
- 2.13.73

-------------------------------------------------------------------
Fri Apr 14 22:25:11 CEST 2006 - jsrain@suse.de

- prevent from changing installation mode and system for update once
  it is selected (#165832)
- added add-on products to installation/update proposal for SLES/SLED
- 2.13.72

-------------------------------------------------------------------
Fri Apr 14 13:19:52 CEST 2006 - lslezak@suse.cz

- call vm_finish client at the end of installation - disable
  some services in Xen domU (#161720, #161721, #161756)
- 2.13.71

-------------------------------------------------------------------
Thu Apr 13 18:17:52 CEST 2006 - jdsn@suse.de

- changed control files according to (#165509)

-------------------------------------------------------------------
Thu Apr 13 10:35:42 CEST 2006 - mvidner@suse.cz

- Do not display errors if language specific release notes are missing
  on the installation source (#165767).
- 2.13.70

-------------------------------------------------------------------
Wed Apr 12 16:24:48 CEST 2006 - jdsn@suse.de

- added missing autoyast entries in suse_register.desktop
- 2.13.69

-------------------------------------------------------------------
Wed Apr 12 12:57:53 CEST 2006 - jsuchome@suse.cz

- control files updated for manual online update run (#165503)
- 2.13.68

-------------------------------------------------------------------
Wed Apr 12 11:39:08 CEST 2006 - ms@suse.de

- fixed displaying ftp password in plaintext in y2start.log (#164824)

-------------------------------------------------------------------
Wed Apr 12 11:05:34 CEST 2006 - mvidner@suse.cz

- Do not mangle the URL obtained from suse_register (#165499).
- 2.13.67

-------------------------------------------------------------------
Wed Apr 12 09:15:48 CEST 2006 - locilka@suse.cz

- fixed Product.ycp - relnotes_url might be defined as an empty
  string (#165314).
- 2.13.66

-------------------------------------------------------------------
Tue Apr 11 22:19:03 CEST 2006 - jsrain@suse.de

- fixed boot if root is on LVM (initialize udev symlinks) (#163073)
- 2.13.65

-------------------------------------------------------------------
Tue Apr 11 16:01:40 CEST 2006 - jdsn@suse.de

- in inst_suse_register:
  - resized popups (hmuelle)
  - new info pupop showing new update server (aj)
  - removed cancel button (#164801, shorn)
- 2.13.64

-------------------------------------------------------------------
Tue Apr 11 11:28:23 CEST 2006 - fehr@suse.de

- flag for evms in control.SLES.xml needs to be true

-------------------------------------------------------------------
Mon Apr 10 17:08:10 CEST 2006 - mvidner@suse.cz

- Add installation sources for online update (#163192).
- 2.13.63

-------------------------------------------------------------------
Fri Apr  7 23:01:33 CEST 2006 - jsrain@suse.de

- provide Product::short_name (#163702)
- 2.13.62

-------------------------------------------------------------------
Fri Apr  7 15:14:01 CEST 2006 - jdsn@suse.de

- fixed evaluation of control file variables (#162988)
- 2.13.61

-------------------------------------------------------------------
Fri Apr  7 09:39:20 CEST 2006 - jsuchome@suse.cz

- 2.13.60

-------------------------------------------------------------------
Thu Apr  6 17:10:07 CEST 2006 - ms@suse.de

- allow huge memory allocations (#151515)

-------------------------------------------------------------------
Thu Apr  6 15:19:13 CEST 2006 - jsuchome@suse.cz

- Product.ycp: read SHORTLABEL value from content file (#163702)

-------------------------------------------------------------------
Wed Apr  5 18:13:11 CEST 2006 - mvidner@suse.cz

- Call SourceManager::SyncYaSTInstSourceWithZMD () in
  inst_rpmcopy(continue) because inst_suse_register does not run
  without a network connection (#156030#c30).

-------------------------------------------------------------------
Wed Apr  5 17:05:27 CEST 2006 - jsrain@suse.de

- do not rewrite log from SCR running in chroot during installation
- fix checking for duplicate sources (#159662)
- 2.13.59

-------------------------------------------------------------------
Tue Apr  4 18:11:34 CEST 2006 - jdsn@suse.de

- fixed w3m registration again (#162462)
- changed Requires to Recommends for suseRegister (hmuelle, aj)
- 2.13.58

-------------------------------------------------------------------
Mon Apr  3 18:27:15 CEST 2006 - jdsn@suse.de

- fixed w3m in ncuses registration (#162462)
- changes in suse_register to test new server side business logic
- 2.13.57

-------------------------------------------------------------------
Mon Apr  3 14:33:44 CEST 2006 - locilka@suse.cz

- Using yast-addon icon in the .desktop file and also in the source
  code (#154930).
- 2.13.56

-------------------------------------------------------------------
Mon Apr  3 14:32:08 CEST 2006 - ug@suse.de

- by default, enable clone box on SLD

-------------------------------------------------------------------
Mon Apr  3 14:22:22 CEST 2006 - ug@suse.de

- uncheck clone checkbox if cloning is greyed out (#162457)

-------------------------------------------------------------------
Fri Mar 31 17:32:03 CEST 2006 - mvidner@suse.cz

- Tell ZMD to get the inst source (#156030)
- No unlocking after all (#160319)
  - Don't reset zypp
  - Reenable Back
  - Fetch update source from suse_resigster and add it
- 2.13.55

-------------------------------------------------------------------
Thu Mar 30 13:42:35 CEST 2006 - mvidner@suse.cz

- Reset zypp and release its lock before suse_register (#160319).
  Therefore disabled the Back button.
- Don't run add-on.ycp if another process has the zypp lock (#160319).
- 2.13.53

-------------------------------------------------------------------
Thu Mar 30 12:31:49 CEST 2006 - jdsn@suse.de

- included new desktop file in Makefile (162112)

-------------------------------------------------------------------
Wed Mar 29 17:57:35 CEST 2006 - jsrain@suse.de

- prevent from installing one product multiple times (#159662)
- 2.13.54

-------------------------------------------------------------------
Wed Mar 29 16:43:02 CEST 2006 - locilka@suse.cz

- Fixed adding SLP-based Add-On product (#161270)
- SLP-based Add-On product handling moved to separate function
- Add-On MediaSelect dialog creation moved to separate function
- Changed icon for License
- 2.13.52

-------------------------------------------------------------------
Tue Mar 29 16:06:23 CEST 2006 - jdsn@suse.de

- late feature "force registration" for suse_register (aj, shorn)

-------------------------------------------------------------------
Tue Mar 28 21:29:07 CEST 2006 - jdsn@suse.de

- added 'rm -f /var/lib/zypp/zmd_updated_the_sources'
  flag file to be deleted if suse_register runs during installation
  file checked by online update - deletion requested by mvidner
- 2.13.51

-------------------------------------------------------------------
Tue Mar 28 20:53:13 CEST 2006 - jdsn@suse.de

- added autoyast part of suse_register
- icon for product registration (#160293)
- fixes for inst_suse_register
- 2.13.50

-------------------------------------------------------------------
Mon Mar 27 23:47:38 CEST 2006 - jsrain@suse.de

- removed desktop selection from NLD workflow (#160650)

-------------------------------------------------------------------
Fri Mar 24 15:15:30 CET 2006 - locilka@suse.cz

- Filling up list of release_notes urls for all installed products
  in the Product.ycp. Needed for internet_test (#160563).
- 2.13.49

-------------------------------------------------------------------
Fri Mar 24 11:00:06 CET 2006 - ms@suse.de

- added initvicons call in second stage S05-config (#160299)

-------------------------------------------------------------------
Thu Mar 23 18:34:18 CET 2006 - jdsn@suse.de

- fixed security issue: suse-ncc dummy user got his own group

-------------------------------------------------------------------
Thu Mar 23 18:33:25 CET 2006 - jdsn@suse.de

- added controlfile configured default settings for suse_register
- 2.13.47

-------------------------------------------------------------------
Thu Mar 23 16:23:37 CET 2006 - locilka@suse.cz

- Display license immediately after the Add-On product is scanned
  and added. Handle user interaction.
- 2.13.46

-------------------------------------------------------------------
Thu Mar 23 14:16:46 CET 2006 - jdsn@suse.de

- final texts for suse_register
- nonroot - warning for suse_register
- 2.13.45

-------------------------------------------------------------------
Thu Mar 23 13:19:03 CET 2006 - locilka@suse.cz

- Displaying license of the Add-On product if exists. Trying the
  localized version first. Waiting for user interaction if needed.
- Displaying info.txt if exists (#160017)
- Adjusting testsuites
- 2.13.44

-------------------------------------------------------------------
Mon Mar 22 19:04:55 CET 2006 - jdsn@suse.de

- fixed missing module in makefile
- 2.13.43

-------------------------------------------------------------------
Wed Mar 22 19:03:57 CET 2006 - locilka@suse.cz

- Added fallback for adding add-on products without file
  installation.xml. In this case, the product is added as a normal
  installation source and sw_single is called.
- 2.13.42

-------------------------------------------------------------------
Mon Mar 22 18:45:17 CET 2006 - jdsn@suse.de

- fixed ssh bug in suse_register
- suse_register reads and writes configuration to sysconfig
- final texts in suse_register
- 2.13.41

-------------------------------------------------------------------
Wed Mar 22 13:43:12 CET 2006 - mvidner@suse.cz

- Fixed release notes download (by Product::FindBaseProducts), #159490.

-------------------------------------------------------------------
Wed Mar 22 11:40:18 CET 2006 - jdsn@suse.de

- changed help text in suse_register
- patch to make the ComboBox appear longer in release_notes

-------------------------------------------------------------------
Tue Mar 21 16:33:32 CET 2006 - locilka@suse.cz

- adding "Local Directory" option for Add-On Products when no
  network is available (#159779).
- avoid from adding "Unknown" Add-On Product when Cancel button
  pressed in the Add New Add-On popup (#159784).

-------------------------------------------------------------------
Tue Mar 21 08:57:51 CET 2006 - jsuchome@suse.cz

- returned dependency on yast2-online-update

-------------------------------------------------------------------
Tue Mar 21 07:57:37 CET 2006 - visnov@suse.cz

- try to get add-on product control files only optionally (#159116)
- 2.13.40

-------------------------------------------------------------------
Mon Mar 20 10:08:13 CET 2006 - locilka@suse.cz

- disabled skipping the 'Installation Mode' dialog when no other
  installed Linux found. Just disabling 'Update' and 'Other'
  options in that case (#157695).
- removed calling uml_finish, client doesn't has been dropped.

-------------------------------------------------------------------
Fri Mar 17 22:50:06 CET 2006 - jsrain@suse.de

- added AytoYaST support for add-on products
- 2.13.39

-------------------------------------------------------------------
Fri Mar 17 09:30:02 CET 2006 - locilka@suse.cz

- fixed .desktop file for Add-On Products, now it starts add-on
  instead of sw_single when launched from YaST Control Center
  (#158869).

-------------------------------------------------------------------
Thu Mar 16 23:24:11 CET 2006 - jsrain@suse.de

- added zFCP and DASD modules to list of modules to be cloned after
  SLES installation (#153378)
- 2.13.38

-------------------------------------------------------------------
Thu Mar 16 23:10:06 CET 2006 - jsrain@suse.de

- fixed product handling (&product; macro) (#151050)
- allow multiple installation sources (#151755)

-------------------------------------------------------------------
Thu Mar 16 15:51:42 CET 2006 - jdsn@suse.de

- fixed blocker bug (#158628), suse_register call in all products

-------------------------------------------------------------------
Thu Mar 16 14:56:36 CET 2006 - fehr@suse.de

- increase maximal size of root fs to 20 Gig (#158608)
- 2.13.37

-------------------------------------------------------------------
Wed Mar 15 18:21:54 CET 2006 - jsrain@suse.de

- do not overwrite language settings during update (#156562)
- do not offer network sources for Add-On products if no network is
  configured (#156467)
- 2.13.36

-------------------------------------------------------------------
Tue Mar 14 18:16:32 CET 2006 - jdsn@suse.de

- corrected titles in control file
- 2.13.35

-------------------------------------------------------------------
Tue Mar 14 18:11:53 CET 2006 - jdsn@suse.de

- 2.13.34

-------------------------------------------------------------------
Tue Mar 14 18:09:58 CET 2006 - jdsn@suse.de

- new browser for registration
- new texts for registration module

-------------------------------------------------------------------
Mon Mar 13 16:26:00 CET 2006 - jsrain@suse.de

- report an error if creating catalog for add-on product fails
  (#157566)
- 2.13.33

-------------------------------------------------------------------
Fri Mar 10 19:02:04 CET 2006 - jsrain@suse.de

- disable add-on products if inst-sys is mounted from CD
- 2.13.32

-------------------------------------------------------------------
Fri Mar 10 18:33:55 CET 2006 - jdsn@suse.de

- fixed security bug (#157008)
- added link to browser for Novell privacy statement

-------------------------------------------------------------------
Fri Mar 10 17:55:11 CET 2006 - mvidner@suse.cz

- Start ncurses UI in non-threaded mode to enable spawning of
  interactive processes (like w3m for suseRegister, #150799).
- 2.13.31

-------------------------------------------------------------------
Fri Mar 10 12:17:56 CET 2006 - ms@suse.de

- forcing using xim for Qt Input (#156962)

-------------------------------------------------------------------
Thu Mar  9 17:36:39 CET 2006 - mvidner@suse.cz

- Control files: added network/startmode, being ifplugd for SL and
  SLED, auto for SLES (#156388).
- 2.13.30

-------------------------------------------------------------------
Thu Mar  9 17:35:30 CET 2006 - jsrain@suse.de

- fixed asking for add-on product CD (#156469)

-------------------------------------------------------------------
Thu Mar  9 12:01:07 CET 2006 - ms@suse.de

- include proofread message texts

-------------------------------------------------------------------
Wed Mar  8 17:00:41 CET 2006 - jdsn@suse.de

- fixed launch of yastbrowser (during installation)
- 2.13.29

-------------------------------------------------------------------
Wed Mar  8 15:25:57 CET 2006 - ms@suse.de

- fixed createStageList() function to be more restrictive on checking
  for stage files. Adapt startup documentation according to this
  change (#144783)

-------------------------------------------------------------------
Wed Mar  8 14:25:02 CET 2006 - lrupp@suse.de

- added suseRegister to Requires

-------------------------------------------------------------------
Tue Mar  7 22:27:45 CET 2006 - jdsn@suse.de

- added functionality to skip suse register and/or online update
- 2.13.28

-------------------------------------------------------------------
Tue Mar  7 20:07:43 CET 2006 - jsrain@suse.de

- added yastbrowser

-------------------------------------------------------------------
Tue Mar  7 00:26:26 CET 2006 - jsrain@suse.de

- fixed back button behavior in installation mode dialog (#155044)

-------------------------------------------------------------------
Mon Mar  6 10:47:31 CET 2006 - visnov@suse.cz

- enable media callbacks in the add-on product handling

-------------------------------------------------------------------
Fri Mar  3 23:30:36 CET 2006 - jsrain@suse.de

- added .desktop file for add-on product installation (#154930)
- properly initialize source for add-on product (#154980)
- 2.13.27

-------------------------------------------------------------------
Fri Mar  3 10:43:12 CET 2006 - visnov@suse.cz

- reset package manager before installing patches

-------------------------------------------------------------------
Wed Mar  1 23:19:47 CET 2006 - jsrain@suse.de

- release all medias before registering add-on product CD or DVD
  (#154348)
- check whether files are on the add-on product media before using
  them (#154314)
- 2.13.26

-------------------------------------------------------------------
Mon Feb 27 18:32:05 CET 2006 - jsrain@suse.de

- fixed setting default desktop according to destop dialog (#152709)
- 2.13.25

-------------------------------------------------------------------
Fri Feb 24 19:40:37 CET 2006 - jsrain@suse.de

- select base product before runing add-on products dialog
- 2.13.24

-------------------------------------------------------------------
Fri Feb 24 16:57:03 CET 2006 - ms@suse.de

- added qt plugin check to check_network function (#149025)

-------------------------------------------------------------------
Thu Feb 23 16:15:50 CET 2006 - jsrain@suse.de

- changed the name of the add-on product control file (#152770)
- 2.13.23

-------------------------------------------------------------------
Wed Feb 22 23:05:28 CET 2006 - jsrain@suse.de

- using correct icon (#151630)
- 2.13.22

-------------------------------------------------------------------
Wed Feb 22 12:45:54 CET 2006 - ms@suse.de

- added console startup message when y2base is called (#148165)

-------------------------------------------------------------------
Wed Feb 22 10:28:42 CET 2006 - visnov@suse.cz

- adapt BuildRequires
- 2.13.21

-------------------------------------------------------------------
Wed Feb 22 01:20:18 CET 2006 - jsrain@suse.de

- do not offer creating AutoYaST profile in first boot mode
  (#152285)
- 2.13.20

-------------------------------------------------------------------
Sun Feb 19 17:48:17 CET 2006 - jsrain@suse.de

- made inst_proposal more resistent to incorrect data returned from
  client modules (#148271)

-------------------------------------------------------------------
Fri Feb 17 23:58:34 CET 2006 - jsrain@suse.de

- removed dependency on yast2-online-update
- integrated add-on product selection to installation workflow
- 2.13.19

-------------------------------------------------------------------
Fri Feb 17 14:19:46 CET 2006 - mvidner@suse.cz

- inst_release_notes: Let the combo box have a label.
- inst_disks_activate: fixed the textdomain (s390 -> installation)

-------------------------------------------------------------------
Thu Feb 16 23:29:18 CET 2006 - jsrain@suse.de

- several fixes of add-on product installation
- 2.13.18

-------------------------------------------------------------------
Tue Feb 14 23:40:31 CET 2006 - jsrain@suse.de

- added possibility to use standalone-installation proposals when
  installing with base product
- added support for replacing 2nd stage workflow
- added support for disabling individual proposal
- added support for inserting steps to inst_finish for add-on
  products
- added copying merged control files to installed system, merging
  them for 2nd stage workflow
- 2.13.17

-------------------------------------------------------------------
Tue Feb 14 18:32:18 CET 2006 - jdsn@suse.de

- new release notes module (multiple release notes) FATE: 120129
- 2.13.16

-------------------------------------------------------------------
Tue Feb 14 01:22:52 CET 2006 - jsrain@suse.de

- fixed add-on product workflow and proposal merging

-------------------------------------------------------------------
Mon Feb 13 22:33:37 CET 2006 - jsrain@suse.de

- updated patchs on add-on product CD according to spec
- 2.13.15

-------------------------------------------------------------------
Mon Feb 13 10:09:58 CET 2006 - visnov@suse.cz

- save zypp.log from instsys

-------------------------------------------------------------------
Sun Feb 12 20:41:09 CET 2006 - olh@suse.de

- umount /dev and /sys unconditionally in umount_finish.ycp

-------------------------------------------------------------------
Sun Feb 12 19:41:28 CET 2006 - olh@suse.de

- remove obsolete comment from umount_finish.ycp

-------------------------------------------------------------------
Sun Feb 12 18:35:41 CET 2006 - visnov@suse.cz

- revert redirect

-------------------------------------------------------------------
Sun Feb 12 16:45:43 CET 2006 - kkaempf@suse.de

- redirect stderr to /var/log/YaST2/zypp.log when running
  1st or 2nd stage installation. (#149001)

-------------------------------------------------------------------
Thu Feb  9 21:27:28 CET 2006 - jsrain@suse.de

- added add-on product installation in running system

-------------------------------------------------------------------
Thu Feb  9 00:56:18 CET 2006 - jsrain@suse.de

- added control file merging functionality

-------------------------------------------------------------------
Tue Feb  7 17:57:40 CET 2006 - mvidner@suse.cz

- control files: Configure the hostname in the main installation
  workflow also in SuSE Linux (#142758) and SLED (#137340).
- 2.13.13

-------------------------------------------------------------------
Mon Feb  6 10:43:59 CET 2006 - olh@suse.de

- remove the /usr/share/locale/br symlink creation, there is
  no user of /usr/share/locale files inside the inst-sys
- remove the hostname linux, domainname local calls
  the hostname is already set in inst_setup.
  yast can not be restarted with ssh installs

-------------------------------------------------------------------
Tue Jan 31 14:30:07 CET 2006 - fehr@suse.de

- disable proposal with separate /home for SLES

-------------------------------------------------------------------
Mon Jan 30 18:19:31 CET 2006 - ms@suse.de

- fixed PCI bus ID setup (#145938)

-------------------------------------------------------------------
Fri Jan 27 14:37:30 CET 2006 - ms@suse.de

- adding truetype font path to the vnc font path (#139351)

-------------------------------------------------------------------
Thu Jan 26 12:51:17 CET 2006 - fehr@suse.de

- remove loading of dm modules, if needed this is done in libstorage

-------------------------------------------------------------------
Tue Jan 24 13:00:43 CET 2006 - ms@suse.de

- added check for testutf8 binary (#144699)

-------------------------------------------------------------------
Tue Jan 24 08:29:29 CET 2006 - jsrain@suse.cz

- enable iSCSI dialog during installation
- 2.13.12

-------------------------------------------------------------------
Mon Jan 23 13:21:46 CET 2006 - mvidner@suse.cz

- Added networkmanager_proposal to the network proposal.
- 2.13.11

-------------------------------------------------------------------
Mon Jan 23 13:03:09 CET 2006 - ms@suse.de

- added y2start.log message if YaST exits abnormally (#141016)
- fixed repatching of xorg.conf file (#144538)

-------------------------------------------------------------------
Mon Jan 23 09:30:07 CET 2006 - jsrain@suse.cz

- added "enable_clone" option (#144101)

-------------------------------------------------------------------
Mon Jan 16 17:07:17 CET 2006 - mvidner@suse.cz

- Prefer the string product feature network/network_manager (always,
  laptop, never) over boolean network/network_manager_is_default.

-------------------------------------------------------------------
Fri Jan 13 14:12:31 CET 2006 - jsrain@suse.cz

- run the desktop dialog also on SLES (#142771)
- added iscsi installation to the installatino workflow
- 2.13.10

-------------------------------------------------------------------
Wed Jan 11 14:50:18 CET 2006 - jsrain@suse.cz

- call installation clients for DASD/zFCP configuration instead of
  the run-time ones

-------------------------------------------------------------------
Mon Jan  9 16:47:46 CET 2006 - jsrain@suse.cz

- write mouse information on PPC (#116406)
- UI mode set to expert for SLES
- reset storage after (de)activating any disk (#140936)
- 2.13.9

-------------------------------------------------------------------
Fri Jan  6 16:20:23 CET 2006 - ms@suse.de

- fixed HVC_CONSOLE_HINT text (#140386)

-------------------------------------------------------------------
Thu Jan  5 16:49:24 CET 2006 - jsrain@suse.cz

- Removed unneeded stuff from proposals on some architectures for
  SLES (#140999, #140991)
- Added iSCSI to installation workflow (real call still missing)
- moved DASD/zFCP disk activation prior installation mode selection
  (#140936)
- 2.13.8

-------------------------------------------------------------------
Thu Jan  5 14:29:12 CET 2006 - sh@suse.de

- V 2.13.7
- Fixed bugs #79289, #114037: trouble with y2cc at end of installation
  Dropped y2cc at end of installation (OK from aj + gp)

-------------------------------------------------------------------
Thu Jan  5 13:52:48 CET 2006 - mvidner@suse.cz

- control file: for SLES, ask for the host name in the main workflow (F4126)

-------------------------------------------------------------------
Thu Jan  5 13:04:46 CET 2006 - jsuchome@suse.cz

- control file: for NLD, do not enable autologin by default (#140990)

-------------------------------------------------------------------
Tue Jan  3 12:11:15 CET 2006 - ms@suse.de

- don't call initvicons on s390/s390x architectures (#140383)

-------------------------------------------------------------------
Thu Dec 22 12:25:26 CET 2005 - fehr@suse.de

- added try_separate_home to partitioning section of control.xml

-------------------------------------------------------------------
Wed Dec 21 11:30:11 CET 2005 - ms@suse.de

- fixed startup Makefile.am

-------------------------------------------------------------------
Wed Dec 21 10:36:13 CET 2005 - visnov@suse.cz

- merged proofread texts

-------------------------------------------------------------------
Tue Dec 20 13:14:02 CET 2005 - ms@suse.de

- added support for graphical installation on ia64 archs (#140142)

-------------------------------------------------------------------
Mon Dec 19 18:10:00 CET 2005 - sh@suse.de

- Implemented feature #300359: Show Beta notice during installation
  Now showing /info.txt in a popup (with a simple "OK" button)
  over the license agreement
- V 2.13.6

-------------------------------------------------------------------
Fri Dec 16 16:15:24 CET 2005 - jsrain@suse.cz

- do not call obsolete gnome-postinstall script
- added list of modules to offer clone at the end of installation
  to control files
- 2.13.5

-------------------------------------------------------------------
Wed Dec 14 12:07:13 CET 2005 - ms@suse.de

- make service startup more robust (#138433)

-------------------------------------------------------------------
Fri Dec  2 16:19:15 CET 2005 - mvidner@suse.cz

- Added control file variables network_manager_is_default,
  force_static_ip.
- 2.13.4

-------------------------------------------------------------------
Fri Dec  2 09:57:48 CET 2005 - jsrain@suse.cz

- mark missing texts for translation (#136021)

-------------------------------------------------------------------
Wed Nov 30 08:07:25 CET 2005 - lslezak@suse.cz

- removed Xen and UML sections from control files
  (moved to yast2-vm package)
- 2.13.4

-------------------------------------------------------------------
Tue Nov 29 14:19:05 CET 2005 - sh@suse.de

- Implemented feature #110081: License translations
- V 2.13.3

-------------------------------------------------------------------
Mon Nov 28 12:50:08 CET 2005 - jsrain@suse.cz

- adjusted default desktop in control files (#132491)

-------------------------------------------------------------------
Tue Nov 22 12:58:19 CET 2005 - jsrain@suse.cz

- added default desktop to control files

-------------------------------------------------------------------
Fri Nov 11 08:20:27 CET 2005 - jsrain@suse.cz

- write hwcfg-static-printer only if parallel port is present
  (#116406)
- 2.13.2

-------------------------------------------------------------------
Tue Nov  1 13:02:58 CET 2005 - jsrain@suse.cz

- adapted to inst_desktop_new.ycp -> inst_desktop.ycp rename

-------------------------------------------------------------------
Tue Oct 18 12:35:16 CEST 2005 - ms@suse.de

- added update check: update_xf86config to be called in case of
  update. The script will fix the mouse configuration if the device
  /dev/mouse or /dev/psaux is in use (#118755)

-------------------------------------------------------------------
Mon Oct 17 16:28:11 CEST 2005 - ms@suse.de

- added testX binary check

-------------------------------------------------------------------
Thu Oct 13 16:21:53 CEST 2005 - ms@suse.de

- fixed startup scripts because Stefan changed the X11 module
  naming from drv.o to drv.so :-(

-------------------------------------------------------------------
Fri Sep 30 14:22:28 CEST 2005 - jsrain@suse.cz

- remove checking whether to run language selection (language
  module knows better whether it is needed)

-------------------------------------------------------------------
Mon Sep 26 17:48:58 CEST 2005 - jsrain@suse.cz

- do close target before switching from update to bare metal
  installation (#115075)
- do not set default window manager in sysconfig if neither KDE
  nor GNOME are installed (#115412)
- 2.13.0

-------------------------------------------------------------------
Fri Sep  9 14:14:24 CEST 2005 - ms@suse.de

- fixed service startup sequence of HAL and DBUS (#115815)

-------------------------------------------------------------------
Wed Sep  7 16:00:24 CEST 2005 - jsrain@suse.cz

- fixed typo in the cursor scheme name for GNOME (#74309)
- 2.12.28

-------------------------------------------------------------------
Wed Sep  7 09:16:44 CEST 2005 - jsuchome@suse.cz

- 2.12.27

-------------------------------------------------------------------
Tue Sep  6 17:01:51 CEST 2005 - jsrain@suse.cz

- fixed freezing installation while saving configured hardware
 (#115387)

-------------------------------------------------------------------
Tue Sep  6 13:28:06 CEST 2005 - jsrain@suse.cz

- use correct icons for license agreement and installation mode
  dialogs (#105158)
- 2.12.26

-------------------------------------------------------------------
Mon Sep  5 17:30:18 CEST 2005 - ms@suse.de

- fixed braille setup (#115278)

-------------------------------------------------------------------
Mon Sep  5 16:25:44 CEST 2005 - ms@suse.de

- start dbus in Second-Stage/S06-services (#114667)

-------------------------------------------------------------------
Mon Sep  5 12:46:43 CEST 2005 - jsrain@suse.cz

- save all configured hardware at the end of installation (#104676)
- 2.12.25

-------------------------------------------------------------------
Thu Sep  1 13:45:29 CEST 2005 - ms@suse.de

- start hald in Second-Stage/S06-services (#114667)

-------------------------------------------------------------------
Mon Aug 29 09:56:30 CEST 2005 - jsrain@suse.cz

- reset package manager when switched installation mode (#105857)
- 2.12.24

-------------------------------------------------------------------
Fri Aug 26 10:23:24 CEST 2005 - jsrain@suse.cz

- set default cursor theme according to default desktop (#74309)
- 2.12.23

-------------------------------------------------------------------
Wed Aug 24 10:39:48 CEST 2005 - ms@suse.de

- fixed umount_result setting in /etc/install.inf. A space is
  needed between the colon and the value (#112620)

-------------------------------------------------------------------
Tue Aug 23 15:02:53 CEST 2005 - ms@suse.de

- fixed umount call in First-Stage setup -> added F03-umount (#103800)

-------------------------------------------------------------------
Tue Aug 23 12:46:16 CEST 2005 - jsrain@suse.cz

- mark correct tab selected after language is changed (#105995)
- reset target map when switching between installation and upgrade
  (#106627)

-------------------------------------------------------------------
Mon Aug 22 12:18:08 CEST 2005 - jsrain@suse.cz

- fixed title icons for proposal dialogs (#105165)
- 2.12.22

-------------------------------------------------------------------
Fri Aug 19 15:39:31 CEST 2005 - jsrain@suse.cz

- reverted forcing language dialog in NCurses (#102958)
- 2.12.21

-------------------------------------------------------------------
Fri Aug 19 15:33:08 CEST 2005 - ms@suse.de

- fixed mouse probing call, was never called in initial stage (#100665)

-------------------------------------------------------------------
Fri Aug 19 11:32:09 CEST 2005 - arvin@suse.de

- improved initialisation of libstorage callbacks (bug #105562)

-------------------------------------------------------------------
Wed Aug 17 17:37:02 CEST 2005 - ms@suse.de

- added umount_result key to /etc/install.inf containing the exit
  code from trying to umount the inst-sys (#103800)
- 2.12.19

-------------------------------------------------------------------
Wed Aug 17 15:45:40 CEST 2005 - jsrain@suse.cz

- handle correctly if _proposal client returns nil as warning level
  (#105154)

-------------------------------------------------------------------
Wed Aug 17 15:09:44 CEST 2005 - arvin@suse.de

- check if /sbin/splash exists (bug #105159)
- 2.12.18

-------------------------------------------------------------------
Tue Aug 16 08:51:16 CEST 2005 - jsrain@suse.cz

- build relation between old keys and new UDIs (#104676)

-------------------------------------------------------------------
Mon Aug 15 16:49:22 CEST 2005 - jsrain@suse.cz

- merged texts from proofread
- 2.12.17

-------------------------------------------------------------------
Mon Aug 15 14:45:43 CEST 2005 - ms@suse.de

- fixed vncpassword handling (#104377)

-------------------------------------------------------------------
Mon Aug 15 13:02:07 CEST 2005 - jsrain@suse.cz

- make the OK button in other installatino options popup default
  button (#104589)

-------------------------------------------------------------------
Fri Aug 12 14:35:19 CEST 2005 - jsrain@suse.cz

- force language selection in NCurses (#102958)
- 2.12.16

-------------------------------------------------------------------
Fri Aug 12 12:32:42 CEST 2005 - ms@suse.de

- fixed use of graphical installer within SSH session (#53767)

-------------------------------------------------------------------
Fri Aug 12 10:15:26 CEST 2005 - ms@suse.de

- fixed set_splash function to work with SuSE 10.0

-------------------------------------------------------------------
Tue Aug  9 15:22:24 CEST 2005 - ms@suse.de

- fixed shell warning (#100729)

-------------------------------------------------------------------
Mon Aug  8 14:06:10 CEST 2005 - jsrain@suse.cz

- show URL of product vendor in congratulation dialog (#102542)

-------------------------------------------------------------------
Fri Aug  5 13:00:16 CEST 2005 - lslezak@suse.cz

- added virtual machine proposal into contol file
- 2.12.15

-------------------------------------------------------------------
Wed Aug  3 13:01:20 CEST 2005 - jsrain@suse.cz

- fixed behavior in proposal with tabs if one of the submodules
  returned an error (#100203)
- 2.12.14

-------------------------------------------------------------------
Tue Aug  2 15:24:14 CEST 2005 - jsrain@suse.cz

- do not allow going back after 2nd stage installation is
  interrupted by reboot
- restore settings after reboot during 2nd stage installation

-------------------------------------------------------------------
Thu Jul 28 11:31:15 CEST 2005 - jsrain@suse.cz

- updated the installation confirmation popup (#98841)
- changed label of push button to access boot and repair (#98836),
  added help text
- 2.12.13

-------------------------------------------------------------------
Mon Jul 25 14:56:54 CEST 2005 - ms@suse.de

- include functions start_yast_and_reboot() and start_yast_again()
  according to a feature request for Jiri.

-------------------------------------------------------------------
Fri Jul 22 13:09:38 CEST 2005 - jsrain@suse.cz

- fixed dialog captions of proposals

-------------------------------------------------------------------
Thu Jul 21 17:01:57 CEST 2005 - fehr@suse.de

- replace obsolete SCR agent calls by call to Storage::ActivateHld()

-------------------------------------------------------------------
Thu Jul 21 11:54:19 CEST 2005 - ms@suse.de

- fixed YaST2.call::wait_for_x11() to set an initial value
  for server_running (#97381)
- 2.12.12

-------------------------------------------------------------------
Tue Jul 19 17:25:15 CEST 2005 - jsrain@suse.cz

- fixed switch from installation to update and vice versa
- added support for reboot and restart of YaST during 2nd stage
  installation
- updated control file to show 3 installation stages

-------------------------------------------------------------------
Mon Jul 18 13:38:50 CEST 2005 - jsrain@suse.cz

- updated control file
- minor inst_proposal clean-up
- 2.12.11

-------------------------------------------------------------------
Fri Jul 15 15:35:03 CEST 2005 - jsrain@suse.cz

- fixed behavior of several dialogs
- 2.12.10

-------------------------------------------------------------------
Thu Jul 14 18:18:42 CEST 2005 - jsrain@suse.cz

- added installation workflow
- added support for tabs in proposals
- adapted to new partitioner using storage-lib (arvin)
- moved inst_desktop.ycp to yast2-packager
- 2.12.9

-------------------------------------------------------------------
Mon Jul 11 16:21:58 CEST 2005 - jsrain@suse.cz

- removed dependency on vanished Display.ycp to fix build
- 2.12.8

-------------------------------------------------------------------
Mon Jul 11 11:14:18 CEST 2005 - ms@suse.de

- fixed race condition in checking servers exit code (#91342)
- fixed testX and xupdate paths

-------------------------------------------------------------------
Thu Jun  2 16:57:14 CEST 2005 - jsrain@suse.cz

- put focus on the release notes to allow scrolling without pushing
  Tab many times to move the focus (#80215)

-------------------------------------------------------------------
Wed Jun  1 14:12:06 CEST 2005 - mvidner@suse.cz

- Added a scr file for .etc.install_inf_options (#75720).
- 2.12.7

-------------------------------------------------------------------
Tue May 31 11:39:56 CEST 2005 - ms@suse.de

- implement check for driver update mode (#84155)

-------------------------------------------------------------------
Tue May 31 11:04:04 CEST 2005 - ms@suse.de

- applied patch from Olaf to avoid some time consuming calls (#86178)
- allow "vnc=1 usessh=1" as install and debug method (#45127)

-------------------------------------------------------------------
Mon May 30 15:55:55 CEST 2005 - jsrain@suse.cz

- display message when fallen into text mode installation (#53748)

-------------------------------------------------------------------
Mon May 16 10:53:27 CEST 2005 - jsrain@suse.cz

- renamed 'default' variable
- 2.12.6

-------------------------------------------------------------------
Tue May 10 14:05:01 CEST 2005 - jsrain@suse.cz

- copy /etc/X11/xorg.conf instead of XF86Config to the target
  system
- 2.12.5

-------------------------------------------------------------------
Mon May  9 18:27:54 CEST 2005 - ms@suse.de

- removed sed update of BusID (#78950)

-------------------------------------------------------------------
Wed Apr 27 12:56:15 CEST 2005 - jsrain@suse.cz

- modularized inst_finish.ycp
- 2.12.4

-------------------------------------------------------------------
Thu Apr 21 11:14:04 CEST 2005 - ms@suse.de

- fixed X11 config patching code, related to (#66989)

-------------------------------------------------------------------
Mon Apr 18 17:10:55 CEST 2005 - jsrain@suse.cz

- one more fix for new ProductFeatures.ycp interface
- 2.12.3

-------------------------------------------------------------------
Mon Apr 18 15:19:44 CEST 2005 - jsrain@suse.cz

- adapted to new interface of ProductFeatures.ycp
- 2.12.2

-------------------------------------------------------------------
Thu Apr 14 17:19:30 CEST 2005 - visnov@suse.cz

- 2.12.1

-------------------------------------------------------------------
Wed Apr  6 15:39:25 CEST 2005 - ms@suse.de

- inst-sys move XF86Config to xorg.conf (#66989)

-------------------------------------------------------------------
Tue Mar 29 14:23:17 CET 2005 - jsrain@suse.cz

- updated the layout of the source files in the repository
- 2.12.0

-------------------------------------------------------------------
Wed Mar 23 15:04:17 CET 2005 - ms@suse.de

- fixed vnc server arguments (#70896)

-------------------------------------------------------------------
Sat Mar 19 10:15:14 CET 2005 - ms@suse.de

- fixed second stage locale setup for textbased installation (#73631)

-------------------------------------------------------------------
Tue Mar 15 16:59:19 CET 2005 - ms@suse.de

- IMPORTANT: fixed locale setup (#72145)

-------------------------------------------------------------------
Tue Mar 15 09:44:32 CET 2005 - jsrain@suse.cz

- enable netdaemon if GNOME is default desktop (#72018)

-------------------------------------------------------------------
Mon Mar 14 15:23:17 CET 2005 - jsrain@suse.cz

- enable FAM daemon when GNOME is installed

-------------------------------------------------------------------
Mon Mar 14 14:15:34 CET 2005 - ms@suse.de

- fixed missing reboot on SSH installation (#67043)

-------------------------------------------------------------------
Fri Mar 11 16:50:14 CET 2005 - ms@suse.de

- added option --auto-fonts to Y2_QT_ARGS (#72174)

-------------------------------------------------------------------
Fri Mar 11 12:57:37 CET 2005 - ms@suse.de

- fixed setting TERM variable (#71771)

-------------------------------------------------------------------
Mon Mar  7 08:27:03 CET 2005 - jsrain@suse.cz

- initialize &product; macro in inst_suseconfig (#70899)
- set hwcfg file for parallel printer (#64412)

-------------------------------------------------------------------
Thu Mar  3 17:36:56 CET 2005 - ms@suse.de

- fixed LANG setting in F03-language (#66498)

-------------------------------------------------------------------
Thu Mar  3 12:53:00 CET 2005 - ms@suse.de

- fixed startup scripts for pcmcia/usb network installations (#65164)

-------------------------------------------------------------------
Wed Mar  2 10:53:37 CET 2005 - jsrain@suse.cz

- merged texts from proofread

-------------------------------------------------------------------
Wed Mar  2 06:42:11 CET 2005 - nashif@suse.de

- url in last dialog is set to www.novell.com/linux

-------------------------------------------------------------------
Tue Mar  1 12:13:09 CET 2005 - jsrain@suse.cz

- removed obsolete symlink juggling (#66016)

-------------------------------------------------------------------
Thu Feb 24 16:10:03 CET 2005 - ms@suse.de

- added logsize check to FirstStage/F07-logging

-------------------------------------------------------------------
Wed Feb 23 11:35:18 CET 2005 - jsrain@suse.cz

- fixed comments for translators

-------------------------------------------------------------------
Tue Feb 22 18:30:15 CET 2005 - ms@suse.de

- fixed check for X11 configuration in continue mode (#66224)

-------------------------------------------------------------------
Tue Feb 22 13:11:41 CET 2005 - sh@suse.de

- V 2.11.17

-------------------------------------------------------------------
Tue Feb 22 13:05:23 CET 2005 - ms@suse.de

- fixed Y2MAXLOGSIZE setting, which was set to 0 because df within
  inst-sys is not an option for checking the filesystem space

-------------------------------------------------------------------
Mon Feb 21 18:10:26 CET 2005 - sh@suse.de

- Proper log-rotating in inst_finish
- V 2.11.16

-------------------------------------------------------------------
Fri Feb 18 10:55:09 CET 2005 - jsrain@suse.cz

- added "Initializing..." title to installation before something
  else is shown (#51039)

-------------------------------------------------------------------
Thu Feb 17 12:41:33 CET 2005 - ms@suse.de

- fixed inst-sys copy process of XF86Config to take care
  about the new name xorg.conf

-------------------------------------------------------------------
Wed Feb 16 14:53:57 CET 2005 - jsrain@suse.cz

- fix displaying release notes if the localized version is not
  available (#50911)

-------------------------------------------------------------------
Thu Feb 10 13:13:50 CET 2005 - jsrain@suse.cz

- reduced forced minimal size of the release notes popup (#50637)
- fixed the order of proposal creation (and thus firewall
  is enabled again) (#50622)
- 2.11.15

-------------------------------------------------------------------
Wed Feb  9 19:16:22 CET 2005 - nashif@suse.de

- Save files control.xml and info.txt from installation into
  /etc/YaST2.

-------------------------------------------------------------------
Wed Feb  9 15:05:33 CET 2005 - jsrain@suse.cz

- additional kernel parameters in control file Prof moved to
  the new variable (#50369)

-------------------------------------------------------------------
Tue Feb  8 16:14:44 CET 2005 - nashif@suse.de

- Moved ProductControl to yast2 package

-------------------------------------------------------------------
Mon Feb  7 13:46:48 CET 2005 - jsrain@suse.cz

- fixed order of items in the "Change" button in proposals (#50204)
- merged texts from proofread
- added label informing about release notes from media
- fixed translating empty string in the installation steps
- 2.11.12

-------------------------------------------------------------------
Fri Feb  4 13:14:54 CET 2005 - jsrain@suse.cz

- display release notes from installation proposal

-------------------------------------------------------------------
Wed Feb  2 18:21:48 CET 2005 - ms@suse.de

- fixed control center call (#50389)

-------------------------------------------------------------------
Tue Feb  1 17:02:20 CET 2005 - nashif@suse.de

- Fixed left "steps" display problems (#50388)

-------------------------------------------------------------------
Wed Jan 26 16:12:23 CET 2005 - nashif@suse.de

- install inst_default_desktop.ycp (#49838)

-------------------------------------------------------------------
Tue Jan 25 07:21:53 CET 2005 - nashif@suse.de

- Fixed arguments in control file
- Fixed deleting completed steps
- 2.11.10

-------------------------------------------------------------------
Mon Jan 24 16:29:32 CET 2005 - nashif@suse.de

- Moved installation workflow routines out of installation.ycp
- Adapted arguments of installation clients
- Enhanced control file and made it more readable (arguments of clients
  are clearer now)

-------------------------------------------------------------------
Mon Jan 24 11:27:55 CET 2005 - ms@suse.de

- fixed language environment (#49811)

-------------------------------------------------------------------
Thu Jan 13 11:35:45 CET 2005 - jsrain@suse.cz

- changed the "System will boot now..." message at the end of
  isnt_finish.ycp (#41592)
- 2.11.8

-------------------------------------------------------------------
Wed Jan 12 12:44:29 CET 2005 - ms@suse.de

- removed xmset calls to disable/enable the mouse pointer.
- prevent patching X11 configuration in continue mode

-------------------------------------------------------------------
Wed Jan 12 11:39:31 CET 2005 - ms@suse.de

- fixed yast startup in continue mode. The evaluation of the
  variables USE_SSH and VNC was wrong in S08-start and
  S09-cleanup

-------------------------------------------------------------------
Tue Jan 11 16:16:38 CET 2005 - jsrain@suse.cz

- prevent disabling the Next button in the proposal (#46708)

-------------------------------------------------------------------
Wed Jan  5 17:30:11 CET 2005 - jsrain@suse.cz

- removed unneeded imports and variables from installation.ycp
- adapted to changed interface of Kernel.ycp
- 2.11.7

-------------------------------------------------------------------
Tue Jan  4 09:45:17 CET 2005 - jsrain@suse.cz

- on SGI Altix add fetchop and mmtimer to MODULES_LOADED_ON_BOOT
  (was disabled due to problems in Kernel.ycp) (bug #46971)
- disable Back/Accept buttons in inst_finish.ycp (#37025)

-------------------------------------------------------------------
Thu Dec 16 15:13:23 CET 2004 - sh@suse.de

- Applied patch from bug #49275: Enable user to skip proposal
  even if there is a blocker error in it

-------------------------------------------------------------------
Thu Dec 09 10:52:54 CET 2004 - arvin@suse.de

- disable inclusion of fetchop and mmtimer in
  MODULES_LOADED_ON_BOOT on SGI Altix (bug #46971)

-------------------------------------------------------------------
Fri Dec  3 15:05:57 CET 2004 - ms@suse.de

- include some patches from old startup code which has been
  changed while developing the new startup concept. Please note
  all architecture dependant code has to be part of the startup/arch
  directories and must be included in a clean way to the new scripts.
  I will not include any arch changes made in the last weeks because
  this will lead to the same horrible situation we had in the past.
  if there is anything which has to be handled differntly on another
  architecture this must be done separately to be able to maintain
  that code longer than two days

-------------------------------------------------------------------
Wed Dec  1 12:04:13 CET 2004 - sh@suse.de

- Fixed bug #48722: Inconsistent lower/upper case in mode dialog

-------------------------------------------------------------------
Mon Nov 29 12:32:36 CET 2004 - ms@suse.de

- startup scripts ready now. reports can be send using bug: (#46886)

-------------------------------------------------------------------
Thu Nov 11 18:11:38 CET 2004 - arvin@suse.de

- always use Directory::logdir

-------------------------------------------------------------------
Thu Nov 11 17:47:45 CET 2004 - sh@suse.de

- Record macros during installation:
  /var/log/YaST2/macro_inst_initial.ycp for initial stage,
  /var/log/YaST2/macro_inst_cont.ycp  for "continue" mode

-------------------------------------------------------------------
Tue Nov 02 08:45:57 CET 2004 - arvin@suse.de

- allow to select repair/boot in installation mode selection even
  when no update is possible (bug #39874)

-------------------------------------------------------------------
Mon Nov  1 14:32:25 CET 2004 - visnov@suse.cz

- set product name in wizard (#46247)

-------------------------------------------------------------------
Wed Oct 27 11:20:44 CEST 2004 - arvin@suse.de

- on SGI Altix add fetchop and mmtimer to MODULES_LOADED_ON_BOOT
  (bug #46971)

-------------------------------------------------------------------
Tue Oct 26 12:36:26 CEST 2004 - jsrain@suse.cz

- moved parts of Mode.ycp to Installation.ycp
- adapted to Mode.ycp clean-up
- 2.11.2

-------------------------------------------------------------------
Tue Oct 19 10:46:15 CEST 2004 - lslezak@suse.cz

- UML mode: copy /etc/mtab file to host system (#42859)
- version 2.11.1

-------------------------------------------------------------------
Mon Oct 11 15:04:26 CEST 2004 - jsrain@suse.cz

- adapted to functional interface of Arch.ycp

-------------------------------------------------------------------
Mon Oct 11 10:43:25 CEST 2004 - jsrain@suse.cz

- moved default logon/window manager setting to extra client,
  setting it according to the base package selection (#46619)
- 2.11.0

-------------------------------------------------------------------
Thu Sep 30 15:12:09 CEST 2004 - sh@suse.de

- V 2.10.30
- Made final confirmation popup higher to accomodate all text
  without scrolling even in more verbose languages (de, fr)

-------------------------------------------------------------------
Wed Sep 29 14:13:35 CEST 2004 - mls@suse.de

- stop splash animation before starting yast
- go to verbose mode if X didn't start

-------------------------------------------------------------------
Mon Sep 27 15:37:03 CEST 2004 - arvin@suse.de

- don't create top-level "media" convenience links (bug #46152)

-------------------------------------------------------------------
Wed Sep 22 16:48:43 CEST 2004 - sh@suse.de

- Made final installation confirmation dialog wider and higher
  to avoid scrolling even for more verbose languages (de, fr)
- V 2.10.27

-------------------------------------------------------------------
Wed Sep 22 09:30:45 CEST 2004 - visnov@suse.cz

- reinitialize dialog after mode chosen (#45784)

-------------------------------------------------------------------
Tue Sep 21 14:48:15 CEST 2004 - arvin@suse.de

- use suse marble in congratulation screen (bug #45712)

-------------------------------------------------------------------
Mon Sep 20 13:52:35 CEST 2004 - sh@suse.de

- V 2.10.24
- Merged accidentially split translatable messages

-------------------------------------------------------------------
Fri Sep 17 16:12:53 CEST 2004 - sh@suse.de

- V 2.10.23
- Changed final installation confirmation dialog according to
  bug #45279

-------------------------------------------------------------------
Fri Sep 17 12:12:12 CEST 2004 - arvin@suse.de

- moved popup with boot message further to the end (bug #45432)

-------------------------------------------------------------------
Thu Sep 16 17:00:17 CEST 2004 - snwint@suse.de

- use language info from linuxrc to set LANG in YaST.start; this is
  just to run ncurses yast in fbiterm for exotic languages

-------------------------------------------------------------------
Wed Sep 15 15:16:41 CEST 2004 - arvin@suse.de

- fixed back button in internet test dialog (bug #45319)

-------------------------------------------------------------------
Wed Sep 15 14:48:09 CEST 2004 - visnov@suse.cz

- initialize proposal heading before creating dialog (#45340)

-------------------------------------------------------------------
Tue Sep 14 18:22:06 CEST 2004 - sh@suse.de

- V 2.10.20
- Fixed bug #45271: Mixture of en_UK / en_US: "licence" / "license"

-------------------------------------------------------------------
Tue Sep 14 17:05:15 CEST 2004 - mvidner@suse.cz

- Copy the DHCP cache to the right place (#45150).

-------------------------------------------------------------------
Tue Sep 14 12:46:53 CEST 2004 - arvin@suse.de

- fixed help text in main proposal (bug #45093)

-------------------------------------------------------------------
Tue Sep 14 10:53:02 CEST 2004 - jsrain@suse.cz

- added enable_firewall and firewall_ssh_enable to control file
  for PROF
- added related handlinng to ProductControl

-------------------------------------------------------------------
Mon Sep 13 12:57:41 CEST 2004 - jsrain@suse.cz

- set FAM_ONLY_LOCAL and start fam according to default windowmanager
- 2.10.18

-------------------------------------------------------------------
Mon Sep 13 11:28:33 CEST 2004 - arvin@suse.de

- added system info entry to update proposal (bug #45096)

-------------------------------------------------------------------
Fri Sep 10 13:03:30 CEST 2004 - snwint@suse.de

- use vesa driver as fallback, not vga (see #38253, comment #11)

-------------------------------------------------------------------
Thu Sep  9 15:49:46 CEST 2004 - mvidner@suse.cz

- Added a client to test the network and hardware proposals (#44677).
- 2.10.16

-------------------------------------------------------------------
Wed Sep  8 15:47:16 CEST 2004 - visnov@suse.cz

- implemented reordering of proposal items
- implemented support for hyperlinks in proposal summaries

-------------------------------------------------------------------
Tue Sep 07 14:18:56 CEST 2004 - arvin@suse.de

- added proposal step to initialize sources during update before
  mounting filesystems (needed to solve bug #44724)

-------------------------------------------------------------------
Mon Sep  6 13:33:34 CEST 2004 - mvidner@suse.cz

- Copy the DHCP client cache so that we can request the same IP
  (#43974).
- 2.10.14

-------------------------------------------------------------------
Mon Sep  6 09:50:37 CEST 2004 - jsrain@suse.cz

- avoid asking to confirm one license multiple times (#44145)

-------------------------------------------------------------------
Fri Sep 03 14:33:07 CEST 2004 - arvin@suse.de

- call Bootloader::Update instead of Bootloader::Write during
  update (bug #44286)

-------------------------------------------------------------------
Mon Aug 30 17:23:29 CEST 2004 - jsrain@suse.cz

- ask to confirm licenses of packages before installing/updating
  (#44145)
- 2.10.12

-------------------------------------------------------------------
Fri Aug 27 16:59:56 CEST 2004 - mvidner@suse.cz

- When showing the address for a VNC installation, don't rely on
  install.inf, print the current IP (#43974).
- 2.10.11

-------------------------------------------------------------------
Fri Aug 27 15:09:13 CEST 2004 - arvin@suse.de

- merged proof read messages

-------------------------------------------------------------------
Wed Aug 25 11:56:57 CEST 2004 - arvin@suse.de

- avoid tmp file in /tmp (bug #39444)

-------------------------------------------------------------------
Wed Aug 18 09:10:38 CEST 2004 - arvin@suse.de

- updated fvwmrc.yast2 (see bug #43796)

-------------------------------------------------------------------
Tue Aug 17 15:27:40 CEST 2004 - nashif@suse.de

- XFree86 -> xorg-x11 (#43832)

-------------------------------------------------------------------
Fri Aug 13 22:12:31 CEST 2004 - nashif@suse.de

- Fixed update (#43795)

-------------------------------------------------------------------
Wed Aug 11 18:03:11 CEST 2004 - nashif@suse.de

- Copy EULA to installed system for later use in firstboot module

-------------------------------------------------------------------
Wed Aug 11 16:09:43 CEST 2004 - nashif@suse.de

- Added firewall to network proposal (#43718)

-------------------------------------------------------------------
Tue Aug 10 15:21:56 CEST 2004 - nashif@suse.de

- Add default label for proposals

-------------------------------------------------------------------
Tue Aug 10 14:31:34 CEST 2004 - mvidner@suse.cz

- Fixed arguments for proposals (`initial)

-------------------------------------------------------------------
Mon Aug  9 19:37:28 CEST 2004 - nashif@suse.de

- Enable locking of proposals in control file
- Updated DTD for control file

-------------------------------------------------------------------
Thu Jul 29 10:10:04 CEST 2004 - nashif@suse.de

- New variables for ui and language handling added to control file
- Use Linuxrc module for install.inf and yast.inf handling

-------------------------------------------------------------------
Tue Jul 20 11:18:33 CEST 2004 - arvin@suse.de

- use capitalized SUSE in congratulation screen (bug #38853)

-------------------------------------------------------------------
Tue Jun 15 19:16:26 CEST 2004 - sh@suse.de

- Fixed typo in ssh install script (#42058)

-------------------------------------------------------------------
Tue Jun 15 14:11:06 CEST 2004 - sh@suse.de

- Fixed bug #41597: EULA must be scrolled in both dimensions

-------------------------------------------------------------------
Tue Jun 15 12:23:23 CEST 2004 - arvin@suse.de

- added Requires for yast2-update (bug #42013)

-------------------------------------------------------------------
Fri Jun 11 00:58:40 CEST 2004 - nashif@suse.de

- Added variable software_proposal to control file (NLD)

-------------------------------------------------------------------
Thu Jun 10 03:53:14 CEST 2004 - nashif@suse.de

- Added control for NLD

-------------------------------------------------------------------
Tue Jun  8 04:55:22 CEST 2004 - nashif@suse.de

- Also install control file for SLES to avoid lots of possible
  confusion when control file is not found on installation media
  and fallback file is used.
  (#41696)

-------------------------------------------------------------------
Tue Jun  8 04:37:03 CEST 2004 - nashif@suse.de

- Fixed bug #41696: yast uses elevator=anticipatory instead of
  elevator=as

-------------------------------------------------------------------
Sun May 30 00:38:55 CEST 2004 - nashif@suse.de

- Added Services to main control file for translation (#41367)
- 2.9.83

-------------------------------------------------------------------
Thu May 27 14:40:46 CEST 2004 - mvidner@suse.cz

- Added variables to ProductFeatures
  so that yast2-nis-client testsuite passes (~#41038).
- 2.9.82

-------------------------------------------------------------------
Thu May 27 12:21:19 CEST 2004 - arvin@suse.de

- added special console handling for iSeries (bug #39025)

-------------------------------------------------------------------
Wed May 26 11:12:56 CEST 2004 - arvin@suse.de

- set LD_LIBRARY_PATH in 1st stage installation start script
  (bug #40833)

-------------------------------------------------------------------
Tue May 25 14:10:33 CEST 2004 - jsrain@suse.cz

- set the I/O scheduler in ProductFeatures (#41038)
- 2.9.79

-------------------------------------------------------------------
Mon May 24 14:58:50 CEST 2004 - arvin@suse.de

- again ask for TERM variable if it's set to "vt100" (bug #40991)

-------------------------------------------------------------------
Tue May 18 15:32:30 CEST 2004 - arvin@suse.de

- moved fvwmrc.notitle from sax2 here (bug #37480)

-------------------------------------------------------------------
Tue May 11 13:54:26 CEST 2004 - lslezak@suse.cz

- don't ask for TERM variable if it's already set to "xterm"
  or "vt100" from linuxrc (don't ask in UML installation) (#39947)
- version 2.9.76

-------------------------------------------------------------------
Tue May 04 11:13:53 CEST 2004 - arvin@suse.de

- merged proofread messages

-------------------------------------------------------------------
Fri Apr 30 16:30:13 CEST 2004 - arvin@suse.de

- readded vnc remote proposal to SLES workflow (bug #31023)

-------------------------------------------------------------------
Wed Apr 28 15:38:45 CEST 2004 - arvin@suse.de

- quick implementation of execution of update.post2 scripts
  (bug #38677)

-------------------------------------------------------------------
Wed Apr 28 15:26:30 CEST 2004 - lslezak@suse.cz

- set Ctrl+Alt+Del handler in /etc/inittab to halt (instead of
  reboot) in UML system (safe shutdown from host system using
  uml_mconsole)
- version 2.9.73

-------------------------------------------------------------------
Tue Apr 27 18:25:25 CEST 2004 - gs@suse.de

- write Console: entry for p690 hvc console before reading
  /etc/install.inf (bug #39527)

-------------------------------------------------------------------
Tue Apr 27 10:34:06 CEST 2004 - arvin@suse.de

- call Pkg::SetAdditionalLocales after language change from
  proposal (bug #38366)

-------------------------------------------------------------------
Mon Apr 26 12:34:02 CEST 2004 - arvin@suse.de

- activate lvm and md before booting into a installed system
  (bug #39423)

-------------------------------------------------------------------
Thu Apr 22 18:12:43 CEST 2004 - arvin@suse.de

- removed support of starting yast2 installation without keyboard
  (linuxrc always reports a keyboard now) (bug #39235)

-------------------------------------------------------------------
Thu Apr 22 11:08:53 CEST 2004 - arvin@suse.de

- run unicode_{start,stop} only if they are present (bug #35714)

-------------------------------------------------------------------
Wed Apr 21 13:23:17 CEST 2004 - arvin@suse.de

- uses special sles screen for user authentication on sles

-------------------------------------------------------------------
Mon Apr 19 08:44:01 CEST 2004 - lslezak@suse.cz

- UML mode fixes: don't copy mtab to the host (it's not needed),
  find kernel and initrd even when symlinks are missing
  (workaround for bug #39063)
- added help text in UML installation proposal
- version 2.9.64

-------------------------------------------------------------------
Fri Apr 16 17:58:43 CEST 2004 - nashif@suse.de

- store variables needed in run-time in a sysconfig like file
- first try to load saved control file before fallback to packaged one.

-------------------------------------------------------------------
Fri Apr 16 14:57:44 CEST 2004 - arvin@suse.de

- fixed network start for remote x11 installation (bug #38832)

-------------------------------------------------------------------
Fri Apr 16 14:26:09 CEST 2004 - lslezak@suse.cz

- UML mode fixes: don't copy mtab to the host (it's not needed),
  find kernel and initrd even when symlinks are missing
  (workaround for bug #39063)
- added help text in UML installation proposal

-------------------------------------------------------------------
Fri Apr 16 11:08:42 CEST 2004 - arvin@suse.de

- removed keyboard proposal from update proposal for the update
  in the running system (bug #37817)

-------------------------------------------------------------------
Fri Apr 16 10:57:57 CEST 2004 - arvin@suse.de

- don't run on serial console in case of vnc or ssh installation
  (bug #37325)

-------------------------------------------------------------------
Thu Apr 15 18:26:04 CEST 2004 - arvin@suse.de

- add "service" proposal to SLES installation

-------------------------------------------------------------------
Thu Apr 15 12:03:00 CEST 2004 - arvin@suse.de

- log fvwm output for vnc installation (bug #30061)

-------------------------------------------------------------------
Wed Apr 07 12:37:53 CEST 2004 - arvin@suse.de

- avoid tmp file creation in check.boot script (bug #38572)

-------------------------------------------------------------------
Tue Apr 06 19:04:33 CEST 2004 - arvin@suse.de

- use fbiterm for CJK locales if appropriate (bug #37823)

-------------------------------------------------------------------
Tue Apr  6 18:55:20 CEST 2004 - nashif@suse.de

- only_update_selected option added to product feature set
- V 2.9.56

-------------------------------------------------------------------
Tue Apr  6 16:26:14 CEST 2004 - sh@suse.de

- V 2.9.55
- Fixed bug #36908: Use dynamic fonts based on resolution

-------------------------------------------------------------------
Mon Apr  5 14:38:22 CEST 2004 - fehr@suse.de

- load module dm-snapshort at to prevent hangs if LVM contains
  snapshot LVs (#36422)

-------------------------------------------------------------------
Mon Apr 05 11:32:21 CEST 2004 - arvin@suse.de

- show correct warning in second stage installation when xserver
  can't be started (bug #38298)

-------------------------------------------------------------------
Mon Apr 05 11:04:34 CEST 2004 - arvin@suse.de

- adjusted decision of frontend depending on memory size to memory
  requirements of new interpreter (bug #38298)
- fixed memory value in warning popup

-------------------------------------------------------------------
Sat Apr 03 17:44:03 CEST 2004 - arvin@suse.de

- use fbiterm for CJK locales if appropriate (bug #37823)

-------------------------------------------------------------------
Fri Apr 02 15:59:59 CEST 2004 - arvin@suse.de

- finally changed license to GPL for good

-------------------------------------------------------------------
Thu Apr 01 11:34:10 CEST 2004 - arvin@suse.de

- symmetricalized calls to inst_netsetup (bug #37763)

-------------------------------------------------------------------
Thu Apr 01 11:03:37 CEST 2004 - arvin@suse.de

- removed step label for inst_netsetup (bug #37546)

-------------------------------------------------------------------
Wed Mar 31 19:41:34 CEST 2004 - nashif@suse.de

- Added 2 options to control file:
   inform_about_suboptimal_distribution
   use_desktop_scheduler

-------------------------------------------------------------------
Wed Mar 31 17:19:12 CEST 2004 - lslezak@suse.cz

- inst_finish.ycp - copy kernel image, initrd and /etc/mtab to
  the host system in UML installation mode

-------------------------------------------------------------------
Tue Mar 30 11:25:44 CEST 2004 - arvin@suse.de

- disable virtual desktops in fvwm during vnc installation
  (bug #37480)

-------------------------------------------------------------------
Mon Mar 29 14:48:56 CEST 2004 - fehr@suse.de

- call Storage::FinishInstall() at end of installation

-------------------------------------------------------------------
Mon Mar 29 14:46:51 CEST 2004 - sh@suse.de

- Fixed bug #36713 (relies on yast2-core with fix for bug #36711):
  textdomain for wizard steps should come from control.xml

-------------------------------------------------------------------
Mon Mar 29 05:22:12 CEST 2004 - nashif@suse.de

- fixed copying of hook script logs into installed system

-------------------------------------------------------------------
Sun Mar 28 16:05:19 CEST 2004 - nashif@suse.de

- fixed hook scrips, now using WFM::Read(.local...) (#36831 )
- Not executing any scripting after last client
- Detecting mode before installation steps are sets (#37070 )
- logging hook output to /var/log/YaST2 and copying those
file to installed system.

-------------------------------------------------------------------
Thu Mar 25 16:49:04 CET 2004 - sh@suse.de

- Fixed bug #34618: Don't use full-screen if started remotely

-------------------------------------------------------------------
Thu Mar 25 14:50:07 CET 2004 - ms@suse.de

- fixed driver to use on ia64 systems. there is no framebuffer
  available but the vesa driver is working now (#34909)
- fixed possible loop at installation. handle different exit codes
  from testX in scripts/YaST2. The needed changes to testX have
  been made within the sax2 package (#36794)

-------------------------------------------------------------------
Thu Mar 25 12:12:44 CET 2004 - arvin@suse.de

- removed network proposal from update work flow

-------------------------------------------------------------------
Wed Mar 24 16:10:31 CET 2004 - arvin@suse.de

- renamed usbdevfs to usbfs (bug #31869)

-------------------------------------------------------------------
Wed Mar 24 15:07:03 CET 2004 - sh@suse.de

- Fixed bug #36850: Strange texts in y2qt wizard side bar
- V 2.9.42

-------------------------------------------------------------------
Wed Mar 24 11:13:46 CET 2004 - gs@suse.de

- workaround beta3 pre bug: deactivate Hooks::Run
  (causes crash after inst_finish)
- V 2.9.41

-------------------------------------------------------------------
Mon Mar 22 20:32:41 CET 2004 - nashif@suse.de

- Execute features client if variables are set in control file
- V 2.9.40

-------------------------------------------------------------------
Mon Mar 22 15:58:33 CET 2004 - sh@suse.de

- V 2.9.39
- Fixed bug #36292: Wizard steps not translated
- Preliminary fix for bug #36713: Use textdomain from XML file

-------------------------------------------------------------------
Mon Mar 22 11:14:07 CET 2004 - arvin@suse.de

- introduced and handle new variable Installation::scr_destdir
  to be used by Storage (bug #34996)

-------------------------------------------------------------------
Sun Mar 21 19:48:42 CET 2004 - nashif@suse.de

- read/set language/keyboard/timezone
- added client to set product variables before entering proposal

-------------------------------------------------------------------
Fri Mar 19 15:47:08 CET 2004 - arvin@suse.de

- omit skip/don't skip buttons in uml proposal

-------------------------------------------------------------------
Thu Mar 18 16:18:30 CET 2004 - arvin@suse.de

- fixed update work flow setting (bug #36429 and #35007)

-------------------------------------------------------------------
Thu Mar 18 09:59:01 CET 2004 - mvidner@suse.cz

- Fall back to runlevel 3 if we accidentally don't set it
  in the installation proposal. It would be 0 (#35662).

-------------------------------------------------------------------
Wed Mar 17 22:56:12 CET 2004 - nashif@suse.de

- Add runlevel to s390 proposal
- remove x11 from autoinst workflow (handled differently)

-------------------------------------------------------------------
Wed Mar 17 05:46:03 CET 2004 - nashif@suse.de

- update wizard steps at the right spot to enable switching back
  to installation mode

-------------------------------------------------------------------
Tue Mar 16 21:18:06 CET 2004 - kkaempf@suse.de

- run cleanup script for GNOME (#36196)

-------------------------------------------------------------------
Tue Mar 16 16:02:52 CET 2004 - msvec@suse.cz

- added icons to network and hardware proposals

-------------------------------------------------------------------
Tue Mar 16 14:26:03 CET 2004 - fehr@suse.de

- fix typo devmap_mkmod.sh -> devmap_mknod.sh
- 2.9.32

-------------------------------------------------------------------
Tue Mar 16 01:53:54 CET 2004 - nashif@suse.de

- Enabled evms_config in control file

-------------------------------------------------------------------
Tue Mar 16 01:31:55 CET 2004 - nashif@suse.de

- Update steps when switching modes (#35590)

-------------------------------------------------------------------
Mon Mar 15 12:00:07 CET 2004 - arvin@suse.de

- don't ask for terminal type during vnc installation (bug #33534)

-------------------------------------------------------------------
Fri Mar 12 06:45:02 CET 2004 - nashif@suse.de

- Update control file for autoinst
- Enable swittching of steps upon mode change
- Added possibility to disable a workflow step in runtime

-------------------------------------------------------------------
Thu Mar 11 18:50:55 CET 2004 - sh@suse.de

- Fixed bug #34618: Don't use full screen in remote installation

-------------------------------------------------------------------
Wed Mar 10 14:40:11 CET 2004 - arvin@suse.de

- don't warn if only no disk controller can be found (bug #35546)

-------------------------------------------------------------------
Wed Mar 10 09:51:29 CET 2004 - arvin@suse.de

- extended uml installation work flow

-------------------------------------------------------------------
Wed Mar 10 07:08:09 CET 2004 - nashif@suse.de

- Set wizard steps depending on installation mode

-------------------------------------------------------------------
Wed Mar 10 03:04:53 CET 2004 - nashif@suse.de

- removed include dir from spec

-------------------------------------------------------------------
Wed Mar 10 01:07:58 CET 2004 - sh@suse.de

- V 2.9.24
- Migration to new wizard

-------------------------------------------------------------------
Tue Mar  9 13:08:25 CET 2004 - msvec@suse.cz

- replaced X11 version detection code with (simpler) YCP
- package could be noarch currently (reduced NFB a lot)

-------------------------------------------------------------------
Mon Mar 08 11:54:40 CET 2004 - arvin@suse.de

- call more generalized storage function during update

-------------------------------------------------------------------
Fri Mar 05 12:07:50 CET 2004 - arvin@suse.de

- load correct device mapper module and create nodes

-------------------------------------------------------------------
Thu Mar  4 16:40:36 CET 2004 - visnov@suse.cz

- added type info
- 2.9.20

-------------------------------------------------------------------
Wed Mar  3 17:48:49 CET 2004 - nashif@suse.de

- Moved product features to new feature module

-------------------------------------------------------------------
Wed Mar  3 17:43:45 CET 2004 - sh@suse.de

- Applied rw's patch for bug #34531

-------------------------------------------------------------------
Wed Mar 03 15:45:45 CET 2004 - arvin@suse.de

- call storage function to update fstab (bug #34996)

-------------------------------------------------------------------
Tue Mar  2 17:47:11 CET 2004 - sh@suse.de

- Added user-visible workflow step descriptions for new wizard
  layout

-------------------------------------------------------------------
Mon Mar 01 16:53:44 CET 2004 - arvin@suse.de

- work on UML installation

-------------------------------------------------------------------
Fri Feb 27 03:31:46 CET 2004 - nashif@suse.de

- New control file based installation merged

-------------------------------------------------------------------
Fri Feb 20 19:53:00 CET 2004 - arvin@suse.de

- handle abort button in inst_finish (bug #30303)

-------------------------------------------------------------------
Fri Feb 20 11:28:26 CET 2004 - arvin@suse.de

- removed obsolete code from start scripts (bug #31805)

-------------------------------------------------------------------
Mon Feb 16 16:52:00 CET 2004 - mvidner@suse.cz

- set the runlevel according to the proposal
- 2.9.15

-------------------------------------------------------------------
Mon Feb 16 16:01:35 CET 2004 - arvin@suse.de

- added more flexible package handling for products

-------------------------------------------------------------------
Mon Feb 16 13:49:50 CET 2004 - mvidner@suse.cz

- added runlevel_proposal to installation_proposals (#30028)
- 2.9.14

-------------------------------------------------------------------
Mon Feb 16 11:20:01 CET 2004 - arvin@suse.de

- removed obsolete Mode::hardBoot

-------------------------------------------------------------------
Fri Feb 13 15:16:41 CET 2004 - sh@suse.de

- Applied patch from bug #34531: Kernel 2.6 hotplug handling

-------------------------------------------------------------------
Wed Feb 11 16:11:02 CET 2004 - arvin@suse.de

- more control over base selection handling

-------------------------------------------------------------------
Tue Feb 10 17:59:40 CET 2004 - arvin@suse.de

- added type specification in inst_proposal.ycp

-------------------------------------------------------------------
Tue Feb 10 16:02:19 CET 2004 - nashif@suse.de

- remove x11 from workflow for autoyast

-------------------------------------------------------------------
Tue Feb 10 10:32:08 CET 2004 - arvin@suse.de

- fixed building on s390

-------------------------------------------------------------------
Sat Feb  7 09:33:56 CET 2004 - nashif@suse.de

- remove vendor.y2cc file

-------------------------------------------------------------------
Fri Feb 06 16:13:58 CET 2004 - arvin@suse.de

- set default runlevel to 3 or 5 during installation depending
  on the presents of X11 (see bug #32366)

-------------------------------------------------------------------
Fri Feb 06 11:46:47 CET 2004 - arvin@suse.de

- fixed copying of temporary X11 config

-------------------------------------------------------------------
Mon Feb  2 15:49:46 CET 2004 - lslezak@suse.cz

- InitHWinfo module enabled in installation proposal
- version 2.9.4

-------------------------------------------------------------------
Sat Jan 31 21:07:11 CET 2004 - arvin@suse.de

- removed useless 'global'

-------------------------------------------------------------------
Mon Jan 26 17:28:06 CET 2004 - jsrain@suse.de

- removed cfg_susecnfig.scr from file list (was moved to yast2.rpm)
- 2.9.2

-------------------------------------------------------------------
Fri Dec 12 14:23:14 CET 2003 - jsrain@suse.de

- don't check if module is present in initrd before loading it

-------------------------------------------------------------------
Fri Oct 24 15:58:50 CEST 2003 - ms@suse.de

- added stuff from yast2/library/x11 to installation package

-------------------------------------------------------------------
Fri Oct 24 13:09:25 CEST 2003 - arvin@suse.de

- added help text for "Repair Installed System" (bug #30402)

-------------------------------------------------------------------
Fri Oct 17 11:37:46 CEST 2003 - ms@suse.de

- inst_finish: (#32366)
  removed runlevel setup code which is handled within the X11
  module now (XProposal.ycp). The update code for initdefault
  is still present because during update the X11 configuration
  is not started

- inst_x11: (#32366)
  removed dead code which sets the default runlevel to 3 if there
  is no XF86Config file present. This task is done if the X11
  configuration is finished and if there is no X11 configuration
  the default initdefault with aaa_base is set to 3 already

-------------------------------------------------------------------
Wed Sep 24 12:25:08 CEST 2003 - snwint@suse.de

- look for x11 drivers in lib64 dir on x86_64 (#31649)

-------------------------------------------------------------------
Thu Sep 18 11:38:50 CEST 2003 - arvin@suse.de

- shut down temporary network before online test during update
  (bug #31030)

-------------------------------------------------------------------
Thu Sep 18 10:55:43 CEST 2003 - arvin@suse.de

- don't use external pcmcia during firstboot (bug #31252)

-------------------------------------------------------------------
Mon Sep 15 19:26:33 CEST 2003 - msvec@suse.cz

- 2.8.34

-------------------------------------------------------------------
Mon Sep 15 15:15:25 CEST 2003 - gs@suse.de

- YaST2.start: set default value for LANGUAGE

-------------------------------------------------------------------
Mon Sep 15 11:03:04 CEST 2003 - arvin@suse.de

- skip network probing during update (bug #30545)

-------------------------------------------------------------------
Sun Sep 14 15:07:36 CEST 2003 - arvin@suse.de

- reset packagemanager when changing installation mode (bug #27970)

-------------------------------------------------------------------
Sun Sep 14 14:27:12 CEST 2003 - snwint@suse.de

- added test for utf8 serial console to YaST2.{start,firstboot}

-------------------------------------------------------------------
Sat Sep 13 18:39:23 CEST 2003 - nashif@suse.de

- remove inst_startup from autoinst workflow, add it autoinst_init
  (bug #30678)

-------------------------------------------------------------------
Fri Sep 12 17:25:56 CEST 2003 - ms@suse.de

- added milestone texts for X11 config update/inject (#30612)
- fixed lookup path for XFree86 3.x config (#30612)

-------------------------------------------------------------------
Fri Sep 12 14:06:05 CEST 2003 - arvin@suse.de

- fixed permissions of /var/lib/YaST2/install.inf (bug #30630)

-------------------------------------------------------------------
Thu Sep 11 17:32:40 CEST 2003 - kkaempf@suse.de

- use kernel k_smp4G on SMP-systems with
  memory <= 4GB or without PAE support

-------------------------------------------------------------------
Thu Sep 11 11:12:36 CEST 2003 - arvin@suse.de

- check for /proc/splash (bug #30472)

-------------------------------------------------------------------
Wed Sep 10 11:34:10 CEST 2003 - sh@suse.de

- Fixed max log file size calculation:
  Set LANG only in subshell,
  don't rely on /dev in 'df' output - use last line instead

-------------------------------------------------------------------
Tue Sep  9 12:48:47 CEST 2003 - kkaempf@suse.de

- use kernel k_psmp on smp-systems with
  less than 4GB memory or without PAE support

-------------------------------------------------------------------
Tue Sep 09 12:42:20 CEST 2003 - arvin@suse.de

- added kernel option desktop

-------------------------------------------------------------------
Mon Sep  8 18:01:53 CEST 2003 - sh@suse.de

- V 2.8.24
- Fixed bug #29927: Logfile setting too restrictive
  Now checking free space on RAM disk with 'df' and using
  max 10% of that per log file (max 5000)

-------------------------------------------------------------------
Mon Sep  8 11:53:17 CEST 2003 - snwint@suse.de

- advance splash progress bar in YaST2{,.start}
- driver updates are applied in inst_setup (used to be in YaST2.start)
- don't clear screen in YaST2.start

-------------------------------------------------------------------
Thu Sep 04 17:45:53 CEST 2003 - arvin@suse.de

- proof-read messages

-------------------------------------------------------------------
Wed Sep  3 17:27:51 CEST 2003 - gs@suse.de

- installation.ycp: call UI::SetKeyboard in continue mode
  (enable unicode for ncurses in UTF-8 locale)

-------------------------------------------------------------------
Wed Sep  3 10:15:44 CEST 2003 - kkaempf@suse.de

- copy XF86Config from inst-sys to XF86Config.install in
  the system (#29910)

-------------------------------------------------------------------
Tue Sep  2 13:54:53 CEST 2003 - kkaempf@suse.de

- make repair system accessible

-------------------------------------------------------------------
Mon Sep 01 17:42:20 CEST 2003 - arvin@suse.de

- removed obsolete inst_hw_config.ycp and inst_confirm_abort.ycp

-------------------------------------------------------------------
Sun Aug 31 14:56:10 CEST 2003 - arvin@suse.de

- use Popup::ConfirmAbort

-------------------------------------------------------------------
Sat Aug 30 22:27:57 CEST 2003 - arvin@suse.de

- moved reactivation of network to yast2-network (bug #29561)
- moved display of into.txt into separate file

-------------------------------------------------------------------
Thu Aug 28 16:55:51 CEST 2003 - ms@suse.de

- fixed xmigrate call (#29535)

-------------------------------------------------------------------
Thu Aug 28 16:04:41 CEST 2003 - kkaempf@suse.de

- Install default kernel on SMP systems without 'PAE'
  (i.e. Pentium1-SMP)
- Drop check for unsupported Cyrix-CPUs without 'TSC'

-------------------------------------------------------------------
Tue Aug 26 11:49:21 CEST 2003 - arvin@suse.de

- don't gray out next button in proposal in case of blockers
  (bug #29320)

-------------------------------------------------------------------
Fri Aug 22 18:11:20 CEST 2003 - arvin@suse.de

- fixed reading of memory info (bug #29017)

-------------------------------------------------------------------
Fri Aug 22 11:27:23 CEST 2003 - arvin@suse.de

- fixed update workflow

-------------------------------------------------------------------
Thu Aug 21 14:42:12 CEST 2003 - arvin@suse.de

- removed obsolete installation_ui.ycp

-------------------------------------------------------------------
Thu Aug 21 10:04:25 CEST 2003 - kkaempf@suse.de

- copy badlist (if existing) to installed system (#29092)

-------------------------------------------------------------------
Tue Aug 19 08:13:17 CEST 2003 - arvin@suse.de

- better way for mouse probing in text mode (bug #29005)

-------------------------------------------------------------------
Mon Aug 18 11:22:04 CEST 2003 - arvin@suse.de

- don't probe mouse in text mode (bug #29005)

-------------------------------------------------------------------
Fri Aug 15 15:20:38 CEST 2003 - arvin@suse.de

- removed obsolete showlog_defines.ycp

-------------------------------------------------------------------
Tue Aug 12 20:31:12 CEST 2003 - arvin@suse.de

- added remote administration proposal to network proposal

-------------------------------------------------------------------
Tue Aug 12 14:38:03 CEST 2003 - gs@suse.de

- YaST2.start: don't run in UTF-8 mode on a console which is
  connected to a serial port

-------------------------------------------------------------------
Mon Aug 11 15:51:52 CEST 2003 - arvin@suse.de

- use ycp based ncurses menu at end of installation

-------------------------------------------------------------------
Fri Aug 08 10:54:34 CEST 2003 - arvin@suse.de

- variable handling of release notes url

-------------------------------------------------------------------
Wed Aug 06 09:37:19 CEST 2003 - arvin@suse.de

- don't copy kernel config from to /usr/src/linux (bug #28496)

-------------------------------------------------------------------
Fri Aug 01 20:10:11 CEST 2003 - arvin@suse.de

- call inst_netprobe during install
- added desktop files

-------------------------------------------------------------------
Wed Jul 30 11:42:24 CEST 2003 - arvin@suse.de

- don't complain when no storage controllers can be found
  (bug #23686)

-------------------------------------------------------------------
Wed Jul 30 10:23:01 CEST 2003 - arvin@suse.de

- always let YaST run in an UTF-8 environment during installation
  (bug #14751)

-------------------------------------------------------------------
Fri Jul 25 15:13:04 CEST 2003 - arvin@suse.de

- removed handling of XFree86 Version 3 from YaST2.start

-------------------------------------------------------------------
Fri Jul 25 15:12:25 CEST 2003 - gs@suse.de

- YaST2.firstboot: read RC_LANG from /etc/sysconfig/language and
                   export LANG accordingly;
		   call unicode_start/unicode_stop (if required)

-------------------------------------------------------------------
Thu Jul 24 13:39:36 CEST 2003 - gs@suse.de

- YaST2.start: call unicode_start/unicode_stop;
               export YAST_DOES_ACS removed

-------------------------------------------------------------------
Fri Jul 04 13:21:20 CEST 2003 - arvin@suse.de

- convert update workflow into a proposal

-------------------------------------------------------------------
Fri May 23 15:20:32 CEST 2003 - arvin@suse.de

- take kernel command line from install.inf (bug #25745)

-------------------------------------------------------------------
Mon Apr 28 17:25:45 CEST 2003 - arvin@suse.de

- fixes for live eval (bug #26457)

-------------------------------------------------------------------
Wed Apr 23 12:09:20 CEST 2003 - ms@suse.de

- add config migration from 3x to 4x if possible
- ensure XF86Config is available if someone performs an update
  within a XFree86 3.x environment

-------------------------------------------------------------------
Tue Apr 15 17:18:13 CEST 2003 - arvin@suse.de

- removed call of SuSEconfig.3ddiag and switch2mesasoft after
  reboot during installation since they don't exist anymore

-------------------------------------------------------------------
Thu Apr 10 15:49:20 CEST 2003 - ms@suse.de

- fixed conditions of xmset calls (#26214)

-------------------------------------------------------------------
Tue Apr  8 12:51:55 CEST 2003 - jsrain@suse.de

- fixed parsing of kernel parameters containing blank space
  (#26147)

-------------------------------------------------------------------
Tue Apr  1 15:44:12 CEST 2003 - jsrain@suse.de

- added init= kernel parameter to discard list (#25478)

-------------------------------------------------------------------
Tue Mar 18 13:37:15 CET 2003 - kkaempf@suse.de

- drop "insserv apache" again, opens port 80
- 2.7.43

-------------------------------------------------------------------
Mon Mar 17 18:11:40 CET 2003 - kkaempf@suse.de

- "insserv apache" if it's DOC_SERVER (#25436)
- 2.7.42

-------------------------------------------------------------------
Mon Mar 17 16:36:24 CET 2003 - arvin@suse.de

- start fvwm2 for vnc installation (bug #25405)

-------------------------------------------------------------------
Mon Mar 17 15:30:26 CET 2003 - arvin@suse.de

- turn of silent splash mode before displaying messages during
  vnc and ssh installation (bug #25407)

-------------------------------------------------------------------
Mon Mar 17 09:21:22 CET 2003 - kkaempf@suse.de

- start apache as doc_server if suse_help_viewer isn't provided
  by kdebase3-SuSE (25436)
- 2.7.39

-------------------------------------------------------------------
Sat Mar 15 22:54:09 CET 2003 - kkaempf@suse.de

- gdm2 might not be installed yet but earmarked for installation
  (#25410)
- 2.7.38

-------------------------------------------------------------------
Fri Mar 14 17:41:40 CET 2003 - sh@suse.de

- The final and super-great ultimate path for release notes:
  /usr/share/doc/release-notes/RELEASE-NOTES.*.rtf

-------------------------------------------------------------------
Fri Mar 14 17:38:44 CET 2003 - sh@suse.de

- Moved RTF version of release notes from /usr/share/doc to
  /usr/share/doc/release_notes

-------------------------------------------------------------------
Fri Mar 14 17:32:20 CET 2003 - sh@suse.de

- Using file name RELEASE_NOTES.rtf to allow coexistence with
  RELEASE_NOTES.html for Konqueror

-------------------------------------------------------------------
Fri Mar 14 11:14:01 CET 2003 - fehr@suse.de

- remove handling of IDE recorders from inst_finish.ycp
  this is now done much sooner in StorageDevices.ycp (bug #25293)

-------------------------------------------------------------------
Wed Mar 12 15:12:54 CET 2003 - arvin@suse.de

- fixed focus in last installation dialog (bug #25171)

-------------------------------------------------------------------
Wed Mar 12 10:19:51 CET 2003 - ms@suse.de

- fixed broken mouse bug in continue mode (#24914)

-------------------------------------------------------------------
Tue Mar 11 17:16:03 CET 2003 - kkaempf@suse.de

- also set /etc/sysconfig/displaymanager:DISPLAYMANAGER (#25087)

-------------------------------------------------------------------
Mon Mar 10 19:03:34 CET 2003 - kkaempf@suse.de

- check for existance of /usr/src/linux/include/linux before
  copying kernel config.
- 2.7.32

-------------------------------------------------------------------
Mon Mar 10 18:34:58 CET 2003 - mvidner@suse.de

- Added .etc.install_inf_alias to work around an ini-agent
  limitation (#24836).
- 2.7.31

-------------------------------------------------------------------
Mon Mar 10 16:10:27 CET 2003 - arvin@suse.de

- fixed compose characters for certain locales (bug #14751)

-------------------------------------------------------------------
Fri Mar  7 17:21:06 CET 2003 - nashif@suse.de

- Dont read product data from installed system if in config mode
  (#24772 )

-------------------------------------------------------------------
Fri Mar  7 14:04:21 CET 2003 - kkaempf@suse.de

- copy kernel config to /usr/src/linux/... (#24835)

-------------------------------------------------------------------
Thu Mar  6 13:33:40 CET 2003 - fehr@suse.de

- umount fs based on crypto loop files before all other umounts
  (#24751)

-------------------------------------------------------------------
Thu Mar  6 12:58:31 CET 2003 - ms@suse.de

- removed mouse probing code from inst_startup.ycp and put
  that code into installation.ycp. Changed the mouse probing
  code to disconnect the device in front of the probing and
  re-connect it after the probing is done to avoid any
  jumping mouse cursors (#24355)

-------------------------------------------------------------------
Tue Mar 04 21:13:02 CET 2003 - arvin@suse.de

- handle flags from content file in Product module (bug #21561)

-------------------------------------------------------------------
Tue Mar  4 13:07:02 CET 2003 - sh@suse.de

- Fixed bug #24542: Bad license agreement button text

-------------------------------------------------------------------
Mon Mar  3 16:47:07 CET 2003 - sh@suse.de

- Fixed bug #10990: Boot installed system does not unmount

-------------------------------------------------------------------
Mon Mar  3 11:06:28 CET 2003 - fehr@suse.de

- call win resize module not only on i386 but also on x86_64 and ia64

-------------------------------------------------------------------
Thu Feb 27 12:36:16 CET 2003 - arvin@suse.de

- kill (with SIGKILL) shell on tty2 after installation (bug #24404)

-------------------------------------------------------------------
Wed Feb 26 17:17:43 CET 2003 - kkaempf@suse.de

- pass language to packagemanager (#23828)

-------------------------------------------------------------------
Wed Feb 26 12:31:27 CET 2003 - arvin@suse.de

- disable all sources if user aborts installation (bug #24292)

-------------------------------------------------------------------
Tue Feb 25 11:19:26 CET 2003 - arvin@suse.de

- make Hardware Configuration Dialog unconfuseable (bug #24020)

-------------------------------------------------------------------
Mon Feb 24 19:55:43 CET 2003 - kkaempf@suse.de

- add debug hooks (#23787)

-------------------------------------------------------------------
Mon Feb 24 18:25:31 CET 2003 - sh@suse.de

- V 2.7.20
- Fixed bug #24038: Installation language re-selection does not work

-------------------------------------------------------------------
Mon Feb 24 18:00:37 CET 2003 - gs@suse.de

- don't add .UTF-8 to LANG variable (causes problems with ncurses)
  bug #23348

-------------------------------------------------------------------
Mon Feb 24 17:23:55 CET 2003 - mvidner@suse.de

- Added proxy to the network configuration proposal (#24204).

-------------------------------------------------------------------
Fri Feb 21 15:21:41 CET 2003 - arvin@suse.de

- better text for "abort installation" popup (bug #24019)

-------------------------------------------------------------------
Fri Feb 21 12:40:55 CET 2003 - arvin@suse.de

- fixed button labels and help texts (bug #23912)

-------------------------------------------------------------------
Fri Feb 21 12:00:14 CET 2003 - sh@suse.de

- Fixed bug #24027: Root exploit in inst_suseconfig

-------------------------------------------------------------------
Fri Feb 21 11:30:37 CET 2003 - arvin@suse.de

- always do hard reboot (bug #23903)

-------------------------------------------------------------------
Thu Feb 20 15:49:44 CET 2003 - kkaempf@suse.de

- drop /etc/XF86Config (#23965)

-------------------------------------------------------------------
Thu Feb 20 11:39:23 CET 2003 - arvin@suse.de

- use title-style capitalization for menu names (bug #23848)

-------------------------------------------------------------------
Thu Feb 20 09:51:29 CET 2003 - ms@suse.de

- add support for mouse wheel during installation (#21660)

-------------------------------------------------------------------
Wed Feb 19 16:42:22 CET 2003 - arvin@suse.de

- disable all sources if user aborts installation (bug #23776)

-------------------------------------------------------------------
Wed Feb 19 16:07:29 CET 2003 - fehr@suse.de

- fix wrong variable of keyboard module in inst_finish.ycp (#23782)

-------------------------------------------------------------------
Wed Feb 19 08:35:05 CET 2003 - arvin@suse.de

- run SuSEconfig fonts during inst_finish for anti aliased fonts
  (bug #23768)

-------------------------------------------------------------------
Tue Feb 18 20:47:55 CET 2003 - arvin@suse.de

- fixed reading of content file if FLAGS line is missing

-------------------------------------------------------------------
Sat Feb 15 16:26:26 CET 2003 - nashif@suse.de

- call inst_x11 in autoinst mode

-------------------------------------------------------------------
Wed Feb 12 15:23:00 CET 2003 - kkaempf@suse.de

- remove call to mkinfodir (#23588)

-------------------------------------------------------------------
Wed Feb 12 12:03:24 CET 2003 - fehr@suse.de

- Write keytable info to yast.inf again in inst_finish.ycp

-------------------------------------------------------------------
Tue Feb 11 21:39:29 CET 2003 - arvin@suse.de

- handle update flag from content file (bug #21561)

-------------------------------------------------------------------
Mon Feb 10 20:53:53 CET 2003 - arvin@suse.de

- setup complete environment for qt during installation

-------------------------------------------------------------------
Mon Feb 10 18:24:12 CET 2003 - arvin@suse.de

- skip proposal dialog if it's empty (bug #23520)

-------------------------------------------------------------------
Fri Feb  7 16:12:49 CET 2003 - jsuchome@suse.de

- adapted inst_confirm_abort for the use from yast2-repair

-------------------------------------------------------------------
Thu Feb  6 16:16:29 CET 2003 - jsrain@suse.de

- removed missleading help text about starting of network during
  hardware proposal, when network has already been started (#20912)

-------------------------------------------------------------------
Wed Feb 05 17:05:43 CET 2003 - arvin@suse.de

- merged proofread messages

-------------------------------------------------------------------
Mon Feb  3 18:18:08 CET 2003 - sh@suse.de

- V 2.7.7
- Added default function key handling

-------------------------------------------------------------------
Thu Jan 30 16:08:44 CET 2003 - kkaempf@suse.de

- call /usr/bin/mkinfodir in inst_suseconfig
  (replaces SuSEconfig.man_info)

-------------------------------------------------------------------
Wed Jan 29 14:42:42 CET 2003 - arvin@suse.de

- added dialog to ask for preferred method of user authentication

-------------------------------------------------------------------
Tue Jan 28 18:47:16 CET 2003 - arvin@suse.de

- added final congratulations dialog
- added dialog with release notes

-------------------------------------------------------------------
Mon Jan 27 17:47:38 CET 2003 - sh@suse.de

- V 2.7.5
- Use new y2base/qt command line options for better WM cooperation
- Don't start a WM any more in YaST2 start script
  (testX does that now)

-------------------------------------------------------------------
Wed Jan 22 17:11:20 CET 2003 - arvin@suse.de

- use newer interface to modules agent (bug #22995)

-------------------------------------------------------------------
Wed Jan 22 11:36:10 CET 2003 - jsrain@suse.de

- returned accidentally removed call of Bootloader::Write ()
  function (bug #23018)
- 2.7.3

-------------------------------------------------------------------
Fri Dec 20 17:25:00 CET 2002 - arvin@suse.de

- changed label of second button of popup with info.txt (EULA)
  from "Cancel" to "Do Not Accept" (bug #21874)

-------------------------------------------------------------------
Fri Dec 20 17:04:37 CET 2002 - arvin@suse.de

- merged from 8.1 branch:
  - only set hostname during vnc installation if necessary
    (bug #21454)
  - popup with info.txt (EULA) now has a timeout during
    autoinstallation (bug #21413)
  - remove /root/.vnc/passwd after installation (bug #21360)
  - popup with info.txt now has two buttons (accept and cancel)
  - start portmapper if instmode==nfs also on s390 (#21094)

-------------------------------------------------------------------
Thu Dec 12 12:40:22 CET 2002 - jsrain@suse.de

- added handling of modules required to be loaded early after
  mounting root
- not adding ide-scsi to initrd, but scheduling relevant modules
  to be loaded after boot (#19376)

-------------------------------------------------------------------
Wed Dec 11 16:51:45 CET 2002 - lslezak@suse.cz

- .proc.cpuinfo agent rewritten to INI-agent (now supports
  multiple CPU, all keys from /proc/cpuinfo can be read)

-------------------------------------------------------------------
Mon Dec 09 12:49:20 CET 2002 - arvin@suse.de

- add modules ide-cd and cdrom before ide-scsi to INITRD_MODULES
  when an ide cdwriter is found (bug #22343)

-------------------------------------------------------------------
Wed Dec  4 15:29:17 CET 2002 - jsrain@suse.cz

- adapted to new bootloader module interface
- 2.7.1

-------------------------------------------------------------------
Tue Oct 22 16:53:21 CEST 2002 - ms@suse.de

- removed inst_x11 to be part of the installation workflow
- add x11_proposal to:
  hw-config-proposals-home-pc.ycp
  hw-config-proposals-networked-pc.ycp

-------------------------------------------------------------------
Wed Oct 16 14:03:27 CEST 2002 - arvin@suse.de

- correctly handle quotes in /etc/install.inf (bug #20986)

-------------------------------------------------------------------
Wed Oct 16 11:10:07 CEST 2002 - kkaempf@suse.de

- use proper tmpdir for vendor-supplied script when loading
  vendor driver disk (#20967)
- 2.6.87

-------------------------------------------------------------------
Tue Oct 15 16:29:21 CEST 2002 - choeger@suse.de

- renamed product id text from "Open Team Server" to "Openexchange Server",
  because this text is shown into the installation window and the name of
  the cd is associated with this name

-------------------------------------------------------------------
Mon Oct 14 18:21:52 CEST 2002 - sh@suse.de

- V 2.6.85
- Fixed bug #19214: Return to proposal after update

-------------------------------------------------------------------
Mon Oct 14 15:57:34 CEST 2002 - kkaempf@suse.de

- use "UpdateDir" from install.inf when checking vendor
  update media (#19442)
- set /sysconfig/suseconfig/CWD_IN_USER_PATH="no" on non-box
  products (#17464)
- 2.6.84

-------------------------------------------------------------------
Mon Oct 14 15:41:33 CEST 2002 - sh@suse.de

- V 2.6.83
- Fixed bug #19628: Obsolete MediaUI::ChangeMedium() call

-------------------------------------------------------------------
Thu Oct 10 15:26:07 CEST 2002 - arvin@suse.de

- make info text (aka beta warning) scroll-able (bug #20063)

-------------------------------------------------------------------
Wed Oct  9 09:23:53 CEST 2002 - jsrain@suse.cz

- now not enabling 2 gettys on same serial line on p690 (#19788)

-------------------------------------------------------------------
Tue Oct  8 15:37:59 CEST 2002 - kkaempf@suse.de

- disable update for non-box products (#20695)
- 2.6.80

-------------------------------------------------------------------
Mon Oct  7 17:09:46 CEST 2002 - kkaempf@suse.de

- display media.1/info.txt if exists before starting installation
  (#18504)

-------------------------------------------------------------------
Tue Oct  1 17:01:15 CEST 2002 - kkaempf@suse.de

- runlevel 5 only where applicable (#20369)

-------------------------------------------------------------------
Thu Sep 26 18:17:35 CEST 2002 - arvin@suse.de

- remove console kernel option if it's autodectected like
  pseries can do (bug #20177)

-------------------------------------------------------------------
Thu Sep 26 12:56:01 CEST 2002 - choeger@suse.de

- call product specific YaST2 modules before finishing the
  installation

-------------------------------------------------------------------
Tue Sep 24 11:48:17 CEST 2002 - arvin@suse.de

- run depmod after network setup for ssh and vnc installation
  (bug #20040)

-------------------------------------------------------------------
Mon Sep 23 15:31:25 CEST 2002 - arvin@suse.de

- again fix for qt background color (bug #18926)

-------------------------------------------------------------------
Fri Sep 20 17:02:45 CEST 2002 - arvin@suse.de

- in final proposal screen hide button to start control center if
  the control center is not available (bug #19926)

-------------------------------------------------------------------
Fri Sep 20 16:58:14 CEST 2002 - kkaempf@suse.de

- re-init Product module in running system from cached
  product data properly
- 2.6.72

-------------------------------------------------------------------
Fri Sep 20 13:30:40 CEST 2002 - kkaempf@suse.de

- initialize Product module from content data
- 2.6.71

-------------------------------------------------------------------
Fri Sep 20 13:08:08 CEST 2002 - kkaempf@suse.de

- add agent to read "/content" file
- 2.6.69

-------------------------------------------------------------------
Fri Sep 20 11:47:05 CEST 2002 - kkaempf@suse.de

- linuxrc provides 'content' at / now, no need to mount the source.
- 2.6.70

-------------------------------------------------------------------
Fri Sep 20 11:32:26 CEST 2002 - kkaempf@suse.de

- force reboot on s390 after installation
- 2.6.69

-------------------------------------------------------------------
Thu Sep 19 21:17:17 CEST 2002 - kkaempf@suse.de

- umount /var/adm/mount after retrieving content file
- 2.6.68

-------------------------------------------------------------------
Wed Sep 18 17:49:20 CEST 2002 - kkaempf@suse.de

- added product hooks to installation workflow
- 2.6.67

-------------------------------------------------------------------
Wed Sep 18 16:28:57 CEST 2002 - arvin@suse.de

- removed all code regarding zilo (bug #19821)
- fixed qt background color (bug #18926)

-------------------------------------------------------------------
Wed Sep 18 16:00:39 CEST 2002 - arvin@suse.de

- provides/obsoletes the old yast

-------------------------------------------------------------------
Mon Sep 16 12:37:32 CEST 2002 - kkaempf@suse.de

- remove unneeded Save() functions (#19591)

-------------------------------------------------------------------
Thu Sep 12 22:14:45 CEST 2002 - fehr@suse.de

- remove obsolete LVM and MD initialisation in inst_mode.ycp
- 2.6.63

-------------------------------------------------------------------
Thu Sep 12 17:15:52 CEST 2002 - kkaempf@suse.de

- remove control files (#19564)
- 2.6.62

-------------------------------------------------------------------
Thu Sep 12 15:26:35 CEST 2002 - kkaempf@suse.de

- fix vendor path for UnitedLinux (#19442)
- 2.6.61

-------------------------------------------------------------------
Thu Sep 12 14:38:52 CEST 2002 - kkaempf@suse.de

- dont warn about kernel if not in update mode.
- 2.6.60

-------------------------------------------------------------------
Thu Sep 12 13:10:40 CEST 2002 - kkaempf@suse.de

- symlink *.shipped to *.suse on update for LILO compatibility
- 2.6.59

-------------------------------------------------------------------
Wed Sep 11 13:40:41 CEST 2002 - kkaempf@suse.de

- properly unmount sources also on abort and end of update
- move package log to yast2-packager
- handle run-time kernel switch extra
- 2.6.58

-------------------------------------------------------------------
Wed Sep 11 00:42:12 CEST 2002 - kkaempf@suse.de

- remove obsolete package data after update
- release source (CD) and target (rpmdb)
- 2.6.57

-------------------------------------------------------------------
Tue Sep 10 16:15:09 CEST 2002 - arvin@suse.de

- added more provides/obsoletes (bug #19325)

-------------------------------------------------------------------
Tue Sep 10 14:34:13 CEST 2002 - arvin@suse.de

- again fix initial language

-------------------------------------------------------------------
Mon Sep  9 15:46:39 CEST 2002 - kkaempf@suse.de

- fix initial language
- 2.6.54

-------------------------------------------------------------------
Mon Sep 09 15:41:19 CEST 2002 - arvin@suse.de

- run ncurses control center after installation (instead of ycp
  based one) (bug #19246)

-------------------------------------------------------------------
Mon Sep  9 12:48:38 CEST 2002 - kkaempf@suse.de

- drop "noarch"
- 2.6.53

-------------------------------------------------------------------
Mon Sep 09 12:24:03 CEST 2002 - arvin@suse.de

- setup proxy configuration for installation (bug #19189)

-------------------------------------------------------------------
Mon Sep  9 12:20:13 CEST 2002 - kkaempf@suse.de

- remove runme_at_boot at end
- 2.6.51

-------------------------------------------------------------------
Fri Sep  6 12:56:08 CEST 2002 - kkaempf@suse.de

- s390'ers want it different -> k_deflt on smp systems (#18990)
- 2.6.50

-------------------------------------------------------------------
Fri Sep  6 12:48:51 CEST 2002 - kkaempf@suse.de

- properly detect update_mode after restart
- 2.6.49

-------------------------------------------------------------------
Thu Sep  5 20:47:47 CEST 2002 - kkaempf@suse.de

- continue with inst_rpmcopy after update
- 2.6.48

-------------------------------------------------------------------
Thu Sep 05 19:10:43 CEST 2002 - arvin@suse.de

- more old trans-package fun

-------------------------------------------------------------------
Thu Sep 05 15:01:29 CEST 2002 - arvin@suse.de

- always run depmod after installation (bug #18382)
- set HOME=/root during installation (bug #18882)

-------------------------------------------------------------------
Wed Sep  4 16:12:19 CEST 2002 - kkaempf@suse.de

- move update branch to yast2-update (#18876)
- 2.6.45

-------------------------------------------------------------------
Wed Sep 04 12:48:03 CEST 2002 - arvin@suse.de

- fixed provide/obsolete of trans packages (bug #18691)

-------------------------------------------------------------------
Tue Sep  3 22:34:44 CEST 2002 - kkaempf@suse.de

- adapt update workflow to package manager
- 2.6.41

-------------------------------------------------------------------
Mon Sep 02 14:14:15 CEST 2002 - arvin@suse.de

- set default runlevel back to 3 if X11 is not configured
  (bug #18705)

-------------------------------------------------------------------
Mon Sep 02 11:04:17 CEST 2002 - arvin@suse.de

- set HOME=/tmp during installation so qt doesn't pollute root
  filesystem (bug #18663)

-------------------------------------------------------------------
Fri Aug 30 11:18:15 CEST 2002 - arvin@suse.de

- hide output of kill in YaST2.firstboot (bug #18585)
- moved X11Version.ycp to yast2 package

-------------------------------------------------------------------
Thu Aug 29 10:43:43 CEST 2002 - arvin@suse.de

- fixed network start for ssh installation (bug #18506)
- fixed password saving for ssh installation (bug #18507)
- start in textmode for ssh installation (bug #18571)

-------------------------------------------------------------------
Thu Aug 29 10:41:00 CEST 2002 - kkaempf@suse.de

- close source in inst_finish (#18508)

-------------------------------------------------------------------
Wed Aug 28 22:34:37 CEST 2002 - kkaempf@suse.de

- trigger cache copying at end
- 2.6.35

-------------------------------------------------------------------
Tue Aug 27 23:16:31 CEST 2002 - kkaempf@suse.de

- init packagemanager properly
- drop all references to old data (suse/setup/descr/info)

-------------------------------------------------------------------
Tue Aug 27 12:10:15 CEST 2002 - arvin@suse.de

- load firewire support during installation (bug #18379)
- create_interfaces has moved from / to /sbin

-------------------------------------------------------------------
Tue Aug 27 10:43:05 CEST 2002 - arvin@suse.de

- fixes for ssh installation

-------------------------------------------------------------------
Mon Aug 26 12:43:26 CEST 2002 - arvin@suse.de

- don't run x11 configuration if x11 is missing (bug #18208)

-------------------------------------------------------------------
Mon Aug 26 10:18:44 CEST 2002 - kkaempf@suse.de

- ignore even more boot options (#18154)

-------------------------------------------------------------------
Thu Aug 22 20:18:17 CEST 2002 - fehr@suse.de

- call /sbin/vgscan if root filesystem is on LVM before calling
  Boot::Save() (#18180)

-------------------------------------------------------------------
Thu Aug 22 14:43:26 CEST 2002 - arvin@suse.de

- use the same workflow on s390 as on other architectures

-------------------------------------------------------------------
Thu Aug 22 12:31:17 CEST 2002 - kkaempf@suse.de

- drop "ht" flag probing, done in libhd now (#13532).

-------------------------------------------------------------------
Thu Aug 22 10:45:21 CEST 2002 - kkaempf@suse.de

- run "SuSEconfig --module bootsplash" before bootloader
  V 2.6.29

-------------------------------------------------------------------
Thu Aug 22 09:46:46 CEST 2002 - kkaempf@suse.de

- selected packages are also provided after installation
  V 2.6.28

-------------------------------------------------------------------
Thu Aug 22 09:22:28 CEST 2002 - kkaempf@suse.de

- dont use .package agent in inst_finish
  V 2.6.27

-------------------------------------------------------------------
Wed Aug 21 18:01:05 CEST 2002 - kkaempf@suse.de

- fix for build
  V 2.6.26

-------------------------------------------------------------------
Wed Aug 21 16:31:59 CEST 2002 - kkaempf@suse.de

- adaptions to new packager
- V 2.6.25

-------------------------------------------------------------------
Tue Aug 20 19:08:14 CEST 2002 - arvin@suse.de

- use new Mode::x11_setup_needed and Arch::x11_setup_needed

-------------------------------------------------------------------
Tue Aug 20 12:00:23 CEST 2002 - arvin@suse.de

- don't probe for mouse, floppy and usb devices on iseries

-------------------------------------------------------------------
Mon Aug 19 17:58:45 CEST 2002 - olh@suse.de

- implemented starting of ssh in installed system (needed for
  some kinds of remote installation)

-------------------------------------------------------------------
Mon Aug 19 17:53:40 CEST 2002 - arvin@suse.de

- don't probe for mouse, floppy and usb devices on s390

-------------------------------------------------------------------
Mon Aug 19 16:24:31 CEST 2002 - arvin@suse.de

- don't run X11 configuration on S390 (bug #17371)

-------------------------------------------------------------------
Mon Aug 19 09:32:04 CEST 2002 - kkaempf@suse.de

- Moving target by ppc team. One bit more entered to #17739.

-------------------------------------------------------------------
Fri Aug 16 15:21:48 CEST 2002 - kkaempf@suse.de

- drop BOOT_IMAGE=apic evaluation. enableapic is passed
  as normal kernel parameter to k_deflt now.
- add "SuSE" to list of kernel parameters to discard.

-------------------------------------------------------------------
Thu Aug 15 13:53:54 CEST 2002 - kkaempf@suse.de

- linuxrc doesn't reboot on PCMCIA systems any more (#17739)

-------------------------------------------------------------------
Wed Aug 14 17:12:01 CEST 2002 - arvin@suse.de

- added special hardware configuration list for ppc64 and s390
  (bug #17742)

-------------------------------------------------------------------
Wed Aug 14 11:32:07 CEST 2002 - kkaempf@suse.de

- fix NoShell: check (#17714)

-------------------------------------------------------------------
Mon Aug 12 17:01:52 CEST 2002 - kkaempf@suse.de

- fix network parameters passing from /etc/install.inf
- install k_athlon if vendor_id == "AuthenticAMD"  && cpu family >= 6
- drop "acpismp=force" for hyperthreading SMP

-------------------------------------------------------------------
Mon Aug 12 15:48:57 CEST 2002 - kkaempf@suse.de

- read /etc/install.inf:InstMode correctly

-------------------------------------------------------------------
Thu Aug  8 16:23:00 CEST 2002 - kkaempf@suse.de

- honor "/etc/install.inf:NoShell" to suppress extra shell on tty2.

-------------------------------------------------------------------
Wed Aug  7 12:16:33 CEST 2002 - kkaempf@suse.de

- allow for multiple foreign primary partitions (#17458)

-------------------------------------------------------------------
Wed Aug 07 10:47:45 CEST 2002 - arvin@suse.de

- removed access to variable DEFAULT_LANGUAGE in YaST2 start
  script (now only RC_LANG is unsed)

-------------------------------------------------------------------
Tue Aug 06 12:51:33 CEST 2002 - arvin@suse.de

- don't start vnc server twice after reboot during installation
  (bug #17415)

-------------------------------------------------------------------
Mon Aug 05 18:56:15 CEST 2002 - arvin@suse.de

- even more changed for new /etc/install.inf agent

-------------------------------------------------------------------
Mon Aug  5 16:57:21 CEST 2002 - ms@suse.de

- do not call module x11 if serial_console or vnc session
  is active: (#17233)

-------------------------------------------------------------------
Mon Aug  5 15:17:53 CEST 2002 - kkaempf@suse.de

- call "/create_interface <destdir>" on S/390 in order to get network
  setup data to installed system.

-------------------------------------------------------------------
Mon Aug 05 12:10:21 CEST 2002 - arvin@suse.de

- further changed for new /etc/install.inf agent

-------------------------------------------------------------------
Sat Aug 03 15:33:51 CEST 2002 - arvin@suse.de

- removed option -noxim for qt frontend since bug #17161 is now
  solved by changes to yast2-qt

-------------------------------------------------------------------
Fri Aug 02 15:02:54 CEST 2002 - arvin@suse.de

- run qt frontend with option -noxim (bug #17161)
- configure only network card on iSeries

-------------------------------------------------------------------
Fri Aug  2 14:31:49 CEST 2002 - olh@suse.de

- export Y2DEBUG and increase logsize in YaST2.firstboot when
  booted with 'debug'

-------------------------------------------------------------------
Wed Jul 31 16:21:07 CEST 2002 - msvec@suse.cz

- remove MakeCDLinks from inst_finish.ycp (#17309)

-------------------------------------------------------------------
Wed Jul 31 16:21:07 CEST 2002 - msvec@suse.cz

- new agent for /etc/install.inf

-------------------------------------------------------------------
Mon Jul 29 18:15:45 CEST 2002 - arvin@suse.de

- fixed return value in inst_x11.ycp

-------------------------------------------------------------------
Fri Jul 26 13:35:24 CEST 2002 - ms@suse.de

- add subdirectory x11 and include the base modules
  X11Version and inst_x11 to be present at any time

-------------------------------------------------------------------
Tue Jul 23 15:29:46 CEST 2002 - olh@suse.de

- new kernel names and binaries for ppc.

-------------------------------------------------------------------
Tue Jul 23 12:17:48 CEST 2002 - olh@suse.de

- add -httpd /usr/share/vnc/classes to inst_setup_vnc

-------------------------------------------------------------------
Sat Jul 20 11:35:06 CEST 2002 - olh@suse.de

- use WFM::Execute (.local to copy vnc data to target directory

-------------------------------------------------------------------
Fri Jul 19 18:05:51 CEST 2002 - fehr@suse.de

- removed writing of /etc/fstab from inst_finish it is now in
  inst_prepdisk
- version 2.6.5

-------------------------------------------------------------------
Thu Jul 18 13:37:59 CEST 2002 - fehr@suse.de

- moved variable immediate_prepdisk from module Installation to
  module Storage.

-------------------------------------------------------------------
Wed Jul 17 16:29:25 CEST 2002 - arvin@suse.de

- fixed S390 reboot message (bug #17049)

-------------------------------------------------------------------
Tue Jul 16 17:25:31 CEST 2002 - sh@suse.de

- provide/obsolete yast2-trans-inst-proposal and
  yast2-trans-inst-general

-------------------------------------------------------------------
Wed Jul 10 15:51:00 CEST 2002 - arvin@suse.de

- omit keyboard, mouse and bootloader in initial proposal on s390
- fixed location of ycp data files

-------------------------------------------------------------------
Thu Jul 04 16:10:45 CEST 2002 - arvin@suse.de

- moved non binary files to /usr/share/YaST2

-------------------------------------------------------------------
Mon Jun 24 15:24:43 CEST 2002 - kkaempf@suse.de

- New package: split off purely installation related code
  from yast2.rpm

Places

File yast2-installation.changes of Package yast2-installation (Revision 1003fd06d6c4b49a1a981fdb323fcaa7)

Places