Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
openSUSE:Leap:15.0:Rings:1-MinimalX
yast2-storage-ng
yast2-storage-ng.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File yast2-storage-ng.changes of Package yast2-storage-ng
------------------------------------------------------------------- Mon May 14 16:43:05 UTC 2018 - ancor@suse.com - Expose the active flag of the MountPoint class (needed for the definitive fix for bsc#1064437 in modern distributions). - 4.0.180 ------------------------------------------------------------------- Fri May 11 14:05:49 UTC 2018 - igonzalezsosa@suse.com - Partitioner: check whether required packages are installed before committing changes to disk (bsc#1089508). - 4.0.179 ------------------------------------------------------------------- Fri May 11 10:31:10 UTC 2018 - jlopez@suse.com - Partitioner: fix buttons to abort and to go back (part of fate#318196 and related to bsc#1075443). - Partitioner: fixed detection of reprobed system to avoid unnecessary proposal re-calculation. ------------------------------------------------------------------- Fri May 11 10:08:24 UTC 2018 - jlopez@suse.com - Partitioner: allow to select only valid parity algorithms when creating a new MD RAID (bsc#1090182). ------------------------------------------------------------------- Fri May 11 07:36:18 UTC 2018 - ancor@suse.com - Partitioner: "Configure..." button allowing to execute the YaST clients for iSCI, FCoE, DASD, zFCP and XPRAM (bsc#1090753). ------------------------------------------------------------------- Wed May 9 08:21:50 UTC 2018 - igonzalezsosa@suse.com - AutoYaST: do not crash when size is set to 'auto' for a partition without a mount point (bsc#1092414). - 4.0.178 ------------------------------------------------------------------- Tue May 8 15:34:19 UTC 2018 - shundhammer@suse.com - Add note to YAML files for devices not supported in YAML (part of fate#318196) - 4.0.177 ------------------------------------------------------------------- Mon May 7 16:39:49 UTC 2018 - shundhammer@suse.com - Dump devicegraphs and actions in better strategic places (part of fate#318196) - Make sure not to write LUKS passwords to YAML dump files - 4.0.176 ------------------------------------------------------------------- Fri May 04 18:06:41 CEST 2018 - aschnell@suse.com - provide function to disable MD auto assembly (bsc#1090690) - provide function to inhibit udisks from doing mounts - use these two functions when running expert partitioner - 4.0.175 ------------------------------------------------------------------- Fri May 4 14:46:31 UTC 2018 - jlopez@suse.com - Partitioner: added option to import mount points (part of fate#318196 and bsc#1083851). - 4.0.174 ------------------------------------------------------------------- Fri May 4 10:46:31 UTC 2018 - igonzalezsosa@suse.com - AutoYaST: handle <subvolumes_prefix/> and <subvolumes> empty values properly (bsc#1076337, bsc#1090095 and bsc#1091669). - 4.0.173 ------------------------------------------------------------------- Thu May 3 15:46:27 UTC 2018 - ancor@suse.com - Set fs_passno to 2 for ext2/3/4 filesystems assigned to non-root mount points (bsc#1078703). - 4.0.172 ------------------------------------------------------------------- Thu May 3 15:12:09 UTC 2018 - shundhammer@suse.com - Don't require rspec/mocks (not present in inst-sys) (part of fate#318196) - 4.0.171 ------------------------------------------------------------------- Wed May 2 12:55:09 UTC 2018 - shundhammer@suse.com - Dump devicegraph and actions to separate human readable files (part of fate#318196) - 4.0.170 ------------------------------------------------------------------- Fri Apr 27 15:23:05 UTC 2018 - ancor@suse.com - Partitioner: fixed checks when the root filesystem is NFS (bsc#1090752). - 4.0.169 ------------------------------------------------------------------- Fri Apr 27 12:57:25 UTC 2018 - jreidinger@suse.com - add method to check if system has any disk device (bsc#1090753) - 4.0.168 ------------------------------------------------------------------- Fri Apr 27 11:15:20 UTC 2018 - ancor@suse.com - Set fs_passno to 1 for ext2/3/4 root filesystems (bsc#1078703). - 4.0.167 ------------------------------------------------------------------- Fri Apr 27 05:57:25 UTC 2018 - jreidinger@suse.com - fix libstorage logging that do not expect printf expansion (bsc#1091062) - 4.0.166 ------------------------------------------------------------------- Thu Apr 26 10:59:42 UTC 2018 - ancor@suse.com - Ensure the installer adds reused devices to /etc/crypttab and/or /etc/mdadm.conf if needed for booting (bsc#1071350). - 4.0.165 ------------------------------------------------------------------- Wed Apr 25 16:07:46 UTC 2018 - jlopez@suse.com - Partitioner: fix bug after confirming changes in a running system (related to bsc#1086892). - 4.0.164 ------------------------------------------------------------------- Tue Apr 24 09:15:14 UTC 2018 - jlopez@suse.com - Partitioner: do not validate setup just after rescanning (related to bsc#1086892). - 4.0.163 ------------------------------------------------------------------- Mon Apr 23 13:10:15 UTC 2018 - ancor@suse.com - Partitioner: use the correct default value for 'Enable Snapshots' when the 'Operating System' role is chosen for a new device (bsc#1084491). - 4.0.162 ------------------------------------------------------------------- Mon Apr 23 10:27:04 UTC 2018 - jlopez@suse.com - Make the package to be architecture dependant to correctly check the current architecture (bsc#1081198). - 4.0.161 ------------------------------------------------------------------- Fri Apr 20 20:27:15 UTC 2018 - igonzalezsosa@suse.com - AutoYaST: properly handle empty proposals (bsc#1090390). - 4.0.160 ------------------------------------------------------------------- Fri Apr 20 09:39:44 UTC 2018 - ancor@suse.com - Implemented the use_available LVM strategy for the proposal (part of fate#318196). - Make use_available the new default LVM strategy, so the system behavior is closer to the old yast-storage. - Speed improvements in the use_needed LVM strategy. - 4.0.159 ------------------------------------------------------------------- Fri Apr 20 08:49:29 UTC 2018 - jlopez@suse.com - Partitioner: add missing warning and summary of changes when running in an installed system (part of fate#318196 and related to bsc#1086892). - 4.0.158 ------------------------------------------------------------------- Thu Apr 19 13:52:34 UTC 2018 - igonzalezsosa@suse.com - Fix some translations issues in the Expert Partitioner (bsc#1081571). ------------------------------------------------------------------- Wed Apr 18 10:37:17 UTC 2018 - ancor@suse.com - Updated libstorage-ng dependency to ensure slots on extended partitions are handled correctly and added regression unit test about it (bsc#1088483). - Significant speed improvements in the proposal code. ------------------------------------------------------------------- Tue Apr 17 12:01:08 UTC 2018 - shundhammer@suse.com - Added missing help texts in the partitioner (bsc#1079591) - 4.0.157 ------------------------------------------------------------------- Fri Apr 13 12:33:25 UTC 2018 - jlopez@suse.com - Added support for settings 'expert_partitioner_warning' and 'proposal_settings_editable' (bsc#1087486). - Fix bug going back in Partitioner: only re-calculate proposal when the system was re-probed (bsc#1088960). - 4.0.156 ------------------------------------------------------------------- Fri Apr 13 12:31:04 UTC 2018 - igonzalezsosa@suse.com - AutoYaST: support partition_type when set to "primary" (bsc#1081506). - 4.0.155 ------------------------------------------------------------------- Fri Apr 13 10:56:19 UTC 2018 - ancor@suse.com - More informative message displayed when the proposal failed with some given settings, so it doesn't sound like a definitive error (related to bsc#1089274). - 4.0.154 ------------------------------------------------------------------- Tue Apr 10 16:24:16 UTC 2018 - jlopez@suse.com - Partitioner: fix creation of default BTRFS subvolume (bsc#1087918 and bsc#1087763). - 4.0.153 ------------------------------------------------------------------- Tue Apr 10 16:21:04 UTC 2018 - ancor@suse.com - Partitioner: make possible for the embedded yast2-nfs-client to access the vfstype field of fstab, so it can detect and correct legacy NFS entries (bsc#1088426). - 4.0.152 ------------------------------------------------------------------- Tue Apr 10 10:59:32 UTC 2018 - jlopez@suse.com - Update dependency with libstorage-ng (ensure lock system). - Part of fate#318196. - 4.0.151 ------------------------------------------------------------------- Mon Apr 9 19:44:44 UTC 2018 - ancor@suse.com - Fixed the disable_order property of control.xml. Now it affects all the configurable aspects of the volume, as documented (related to bsc#1078495). - 4.0.150 ------------------------------------------------------------------- Mon Apr 9 10:14:12 UTC 2018 - jlopez@suse.com - Add system lock to avoid several processes using the storage stack when a process is already using it with read-write access. - Part of fate#318196. - 4.0.149 ------------------------------------------------------------------- Mon Apr 9 09:14:12 UTC 2018 - ancor@suse.com - Force UTF-8 encoding for (most) strings coming from libstorage-ng (bsc#1088067). - 4.0.148 ------------------------------------------------------------------- Thu Apr 5 15:30:57 UTC 2018 - shundhammer@suse.com - Better error handling if no storage proposal is possible (bsc#1064677) - 4.0.147 ------------------------------------------------------------------- Tue Apr 3 13:26:50 UTC 2018 - jlopez@suse.com - Recover method #exists_in_probed? (bsc#1087818). - 4.0.146 ------------------------------------------------------------------- Tue Apr 3 11:40:35 UTC 2018 - igonzalezsosa@suse.com - Partitioner: do not crash when a striped logical volume is selected (bsc#1087702). ------------------------------------------------------------------- Tue Apr 3 08:23:14 UTC 2018 - ancor@suse.com - Fixed an error searching devices by name introduced by the recent sanitization related to bsc#1083672. - 4.0.145 ------------------------------------------------------------------- Mon Apr 2 11:53:31 UTC 2018 - jlopez@suse.com - Partitioner: add check for minimum size when using snapshots (bsc#1085131). - 4.0.144 ------------------------------------------------------------------- Mon Apr 2 11:04:31 UTC 2018 - ancor@suse.com - If a duplicate PV is found, show an specific error message with instructions (bsc#1082542). - 4.0.143 ------------------------------------------------------------------- Mon Apr 2 09:53:31 UTC 2018 - jlopez@suse.com - Use correct probe mode in unit tests (fate#318196). ------------------------------------------------------------------- Mon Mar 26 14:54:45 UTC 2018 - ancor@suse.com - Honor the LIBSTORAGE_MULTIPATH_AUTOSTART environment variable (part of fate#318196 and part of the fix for bsc#1082542). - 4.0.142 ------------------------------------------------------------------- Mon Mar 26 12:43:53 UTC 2018 - jlopez@suse.com - Sanitize devicegraph after probing when there are LVM volume groups with missing physical volumes (bsc#1083672). - 4.0.141 ------------------------------------------------------------------- Mon Mar 26 09:41:25 UTC 2018 - shundhammer@suse.com - Partitioner: Report detailed reasons why resizing is not possible (fate#318196) - 4.0.140 ------------------------------------------------------------------- Mon Mar 26 09:02:11 UTC 2018 - ancor@suse.com - Partitioner: fixed an error that was causing filesystems to be deleted in some combination of actions (part of fate#318196). ------------------------------------------------------------------- Fri Mar 23 06:33:21 UTC 2018 - igonzalezsosa@suse.com - AutoYaST: add support for LVM thin pools (bsc#1086596). - AutoYaST: add support for stripes/stripesize elements. - 4.0.139 ------------------------------------------------------------------- Mon Mar 19 07:47:13 UTC 2018 - jlopez@suse.com - Fix issues with zero-size devices (bsc#1083887). - Proposal: do not use zero-size devices. - Partitioner: completely hide zero-size devices. - 4.0.138 ------------------------------------------------------------------- Fri Mar 16 16:44:51 UTC 2018 - ancor@suse.com - Added methods to deal with /etc/fstab specs (part of bsc#1071454) - 4.0.137 ------------------------------------------------------------------- Fri Mar 16 10:06:25 UTC 2018 - igonzalezsosa@suse.com - AutoYaST: fixed space distribution on LVM volume groups when using percentages (bsc#1079369). - AutoYaST: do not ignore free spaces smaller than 30MiB (bsc#1085627). - 4.0.136 ------------------------------------------------------------------- Thu Mar 15 16:29:56 UTC 2018 - jreidinger@suse.com - Warn if user creates too big PReP partition which firmware can have problem to load (bsc#1081979) - 4.0.135 ------------------------------------------------------------------- Thu Mar 15 15:37:51 UTC 2018 - shundhammer@suse.com - Partitioner: Check if resize is possible based on filesystem type (fate#318196) - 4.0.134 ------------------------------------------------------------------- Thu Mar 15 09:57:41 UTC 2018 - jlopez@suse.com - Partitioner: do not allow to remove implicit partitions. - Partitioner: allow to remove any disk device (not only disks). - Part of fate#318196. - 4.0.133 ------------------------------------------------------------------- Tue Mar 13 15:04:59 UTC 2018 - shundhammer@suse.com - Post a warning if reusing an existing system mount point without formatting during installation in the partitioner (bsc#1080073) - 4.0.132 ------------------------------------------------------------------- Mon Mar 12 11:35:55 UTC 2018 - igonzalezsosa@suse.com - Add a new btrfs_read_only property to force the root filesystem to be read-only (bsc#1079000) - Honor the subvolumes list for the root filesystem (bsc#1077866) - 4.0.131 ------------------------------------------------------------------- Mon Mar 12 08:50:40 UTC 2018 - jlopez@suse.com - Partitioner: always allow to edit the partition id (bsc#1077868). - 4.0.130 ------------------------------------------------------------------- Fri Mar 9 09:36:27 UTC 2018 - ancor@suse.com - Shadowed subvolumes that are ignored in the first proposal attempt are not longer omitted in subsequent ones (#bsc#1084213 and bsc#1084261). - 4.0.129 ------------------------------------------------------------------- Thu Mar 8 14:35:20 UTC 2018 - jlopez@suse.com - Make proposal to work with implicit partition tables (s390). - Part of fate#318196. - 4.0.128 ------------------------------------------------------------------- Wed Mar 7 16:41:09 UTC 2018 - shundhammer@suse.com - Make sure subvolumes use the same mount_by as their parent btrfs (bsc#1080408) - 4.0.127 ------------------------------------------------------------------- Wed Mar 7 15:01:47 UTC 2018 - ancor@suse.com - Better control on whether a separate /boot/zipl is needed in S/390 systems, both in the Guided Setup and the Partitioner. - Do not longer report FBA DASDs to be unsupported devices for booting (they are indeed supported). - Part of bsc#1070265. - 4.0.126 ------------------------------------------------------------------- Wed Mar 7 11:39:52 UTC 2018 - snwint@suse.com - fix translations in blk_device_resize.rb (bsc#1081598) - 4.0.125 ------------------------------------------------------------------- Mon Mar 5 15:47:29 UTC 2018 - jlopez@suse.com - Guided proposal uses preferred partition table type when possible (e.g., all partitions are deleted). - Part of fate#318196. - 4.0.124 ------------------------------------------------------------------- Mon Mar 5 15:18:00 UTC 2018 - jreidinger@suse.com - Add specialized warning when /boot/efi is on software RAID (bsc#1081578) - 4.0.123 ------------------------------------------------------------------- Mon Mar 5 12:42:49 UTC 2018 - igonzalezsosa@suse.com - AutoYaST: do not stop installation when there is not enough space for automatically added boot devices (bsc#1082999). ------------------------------------------------------------------- Fri Mar 2 13:52:37 UTC 2018 - igonzalezsosa@suse.com - AutoYaST: support to export LVM volume group and MD RAIDs (bsc#1081331). ------------------------------------------------------------------- Fri Mar 2 11:59:29 UTC 2018 - ancor@suse.com - New PReP partitions proposed by the Guided Setup are now always primary (bsc#1082468). - 4.0.122 ------------------------------------------------------------------- Fri Mar 2 10:28:49 UTC 2018 - snwint@suse.com - ensure proper hierarchy when creating btrfs subvolumes (bsc#1078732) - 4.0.121 ------------------------------------------------------------------- Thu Mar 1 15:20:35 UTC 2018 - shundhammer@suse.com - Use default swap priority, not 42 (bsc#1066077) - 4.0.120 ------------------------------------------------------------------- Thu Mar 1 14:48:34 UTC 2018 - jreidinger@suse.com - Do not crash for separate /boot which does not exists yet (bsc#1078774 - 4.0.119 ------------------------------------------------------------------- Thu Mar 1 08:17:01 UTC 2018 - jlopez@suse.com - Partitioner: allow to clone a disk (part of fate#318196). - 4.0.118 ------------------------------------------------------------------- Wed Feb 28 15:39:15 UTC 2018 - ancor@suse.com - More reliable parsing for the hwinfo output (bsc#1082536). - Better documentation and tests for activate callbacks. - 4.0.117 ------------------------------------------------------------------- Wed Feb 28 14:26:21 CET 2018 - aschnell@suse.com - adapted to new activate callbacks in libstorage-ng (see bsc#1082542) - 4.0.116 ------------------------------------------------------------------- Tue Feb 27 09:47:17 UTC 2018 - igonzalezsosa@suse.com - Keep encryption when adding a device to a LVM volume group (bsc#1077750). - 4.0.115 ------------------------------------------------------------------- Tue Feb 27 01:22:48 UTC 2018 - ancor@suse.com - Improved handling of libstorage-ng errors (bsc#1070459, bsc#1079228, bsc#1079817, bsc#1063059, bsc#1080554, bsc#1076776, bsc#1070459 and some others). - 4.0.114 ------------------------------------------------------------------- Mon Feb 26 16:11:12 UTC 2018 - shundhammer@suse.com - Use format(), not Ruby variable expansion for translated messages (bsc#1081454) - 4.0.113 ------------------------------------------------------------------- Mon Feb 26 14:54:59 UTC 2018 - ancor@suse.com - Partitioner: ensure a valid password is provided when encrypting a device (bsc#1065079). - Increase to 8 characters the minimum size to consider an encryption password to be valid (same limit than yast2-storage). - 4.0.112 ------------------------------------------------------------------- Fri Feb 23 14:57:51 UTC 2018 - jreidinger@suse.com - Do not allow to encrypt too small partition (bsc#1065071) - Check size for separate /boot - 4.0.111 ------------------------------------------------------------------- Fri Feb 23 14:50:46 UTC 2018 - jlopez@suse.com - Partitioner: prevent to modify devices used in LVM or MD RAID (bsc#1079827). - 4.0.110 ------------------------------------------------------------------- Fri Feb 23 14:11:10 UTC 2018 - ancor@suse.com - Better handling of errors during hardware probing (bsc#1070459, bsc#1079228, bsc#1079817, bsc#1063059, bsc#1080554, bsc#1076776, bsc#1070459 and some others). - 4.0.109 ------------------------------------------------------------------- Fri Feb 23 13:42:46 UTC 2018 - jlopez@suse.com - Avoid to write files in tests (SCR.Write) (fate#323457). ------------------------------------------------------------------- Thu Feb 22 19:28:22 CET 2018 - aschnell@suse.com - adapted to callback improvements in libstorage-ng (bsc#1070459 and many others) - 4.0.108 ------------------------------------------------------------------- Thu Feb 22 17:12:46 UTC 2018 - shundhammer@suse.com - Added missing textdomain calls (bsc#1081454) - 4.0.107 ------------------------------------------------------------------- Thu Feb 22 16:59:52 UTC 2018 - igonzalezsosa@suse.com - AutoYaST: fix support to create multiple volume groups (bsc#1081633). - 4.0.106 ------------------------------------------------------------------- Thu Feb 22 12:51:48 UTC 2018 - shundhammer@suse.com - Added missing ptable type conversion (fate#323457) - 4.0.105 ------------------------------------------------------------------- Thu Feb 22 12:02:57 UTC 2018 - shundhammer@suse.com - Changed default partition table from MSDOS to GPT (fate#323457) - 4.0.104 ------------------------------------------------------------------- Thu Feb 22 11:41:45 UTC 2018 - snwint@suse.com - ensure partition name changes during the proposal process are taken properly into account (bsc#1078691) - 4.0.103 ------------------------------------------------------------------- Tue Feb 21 14:35:16 UTC 2018 - jlopez@suse.com - Use sysconfig storage file to read the default value for mount_by (bsc#1081198). - Partitioner: allow to configure default value for mount_by. - 4.0.102 ------------------------------------------------------------------- Wed Feb 21 12:29:02 UTC 2018 - ancor@suse.com - Do not take into account unformatted DASDs as a possible target for installation (bsc#1071798). - Partitioner: do not show unformatted DASDs, since they cannot be partitioned or used in any other way. ------------------------------------------------------------------- Wed Feb 21 08:46:02 UTC 2018 - igonzalezsosa@suse.com - AutoYaST: guess which filesystem type should be used for a given partition/logical volume when it is not specified in the profile (bsc#1075203). ------------------------------------------------------------------- Tue Feb 20 16:43:31 UTC 2018 - shundhammer@suse.com - Special handling for mount options for / and /boot/* in the partitioner (bsc#1080731) - 4.0.101 ------------------------------------------------------------------- Tue Feb 20 09:43:12 UTC 2018 - ancor@suse.com - Partitioner: bring back traditional list of mount points for both installation and installed system (bsc#1076167 and bsc#1081200). - Partitioner: bring back traditional behavior of the "Operating System" and "Data" roles during installation (bsc#1078975 and bsc#1073854). - 4.0.100 ------------------------------------------------------------------- Mon Feb 19 18:08:01 UTC 2018 - shundhammer@suse.com - Special handling for mount options for / and /boot/* (bsc#1080731, bsc#1061867, bsc#1077859) - 4.0.99 ------------------------------------------------------------------- Mon Feb 19 14:19:30 UTC 2018 - jreidinger@suse.com - Ensure that there is always selected item in table, if it is not empty (bsc#1076318) - 4.0.98 ------------------------------------------------------------------- Thu Feb 15 16:16:19 UTC 2018 - ancor@suse.com - Adjusted the suggested and minimum sizes of all the booting partitions, both in the storage proposal and in the Partitioner validations (bsc#1076851 and fate#318196). - 4.0.97 ------------------------------------------------------------------- Thu Feb 15 13:01:41 UTC 2018 - igonzalezsosa@suse.com - Fix hwinfo parsing to support more than one device_file property (bsc#1080999) - 4.0.96 ------------------------------------------------------------------- Thu Feb 15 12:33:23 UTC 2018 - jreidinger@suse.com - Split detection of problematic boot scenarios into errors and warnings. With warnings user can continue, but not with errors. (bsc#1074475) - 4.0.95 ------------------------------------------------------------------- Wed Feb 14 09:39:42 UTC 2018 - jlopez@suse.com - PowerPC: do not require /boot partition for non-PowerNV (bsc#1070139). - Partitioner: do not enforce partition id for /boot/efi (bsc#1078707). - 4.0.94 ------------------------------------------------------------------- Mon Feb 12 14:17:15 UTC 2018 - snwint@suse.com - add format options dialog (bsc#1077868) - 4.0.93 ------------------------------------------------------------------- Mon Feb 12 13:13:35 UTC 2018 - ancor@suse.com - More reasonable location in the disk for the partitions proposed to make the system bootable (bsc#1073680 and bsc#1076851). ------------------------------------------------------------------- Fri Feb 9 19:05:17 UTC 2018 - jlopez@suse.com - Partitioner: fix issues using transactions (bsc#1079880 and bsc#1079573). - 4.0.92 ------------------------------------------------------------------- Fri Feb 9 00:51:22 UTC 2018 - ancor@suse.com - Enable multipathd in the target system at the end of installation if there are multipath devices (bsc#1076183). - Updated required version of libstorage-ng-ruby (bsc#1079541). - 4.0.91 ------------------------------------------------------------------- Thu Feb 8 16:48:20 UTC 2018 - jlopez@suse.com - Add class MountPoint (needed for bsc#1076305 and bsc#1066763). - 4.0.90 ------------------------------------------------------------------- Thu Feb 8 15:42:52 UTC 2018 - ancor@suse.com - Partitioner: fixed creation of partition tables (bsc#1078721). - 4.0.89 ------------------------------------------------------------------- Thu Feb 8 10:47:53 UTC 2018 - ancor@suse.com - Partitioner: fixed 'Installation Summary' section (part of fate#318196). - 4.0.88 ------------------------------------------------------------------- Thu Feb 8 10:15:18 UTC 2018 - igonzalezsosa@suse.com - AutoYaST: support additional names in the drive/device element (bsc#1077277). - 4.0.87 ------------------------------------------------------------------- Wed Feb 7 16:47:58 UTC 2018 - shundhammer@suse.com - Disabled empty pages in partitioner for the time being (bsc#1078849) - 4.0.86 ------------------------------------------------------------------- Wed Feb 7 10:57:26 UTC 2018 - igonzalezsosa@suse.com - AutoYaST: support reuse of already existing partitions as LVM physical volumes or MD RAIDs (bsc#1077277). - 4.0.85 ------------------------------------------------------------------- Wed Feb 7 00:18:34 UTC 2018 - ancor@suse.com - Partitioner: fixed 'Device Graph' section (part of fate#318196). - 4.0.84 ------------------------------------------------------------------- Mon Feb 5 15:26:35 UTC 2018 - ancor@suse.com - Added a new 'disk' client, alias for 'partitioner' (bsc#1078900). - 4.0.83 ------------------------------------------------------------------- Wed Jan 31 16:06:25 UTC 2018 - shundhammer@suse.com - Handle arbitrary mount options for /etc/fstab properly (bsc#1066076) - 4.0.82 ------------------------------------------------------------------- Wed Jan 31 14:53:57 UTC 2018 - jlopez@suse.com - Partitioner: list all LVM thin volumes to delete when an LVM thin pool is going to be deleted. - Partitioner: show warning when an LVM thin pool is overcommitted after resizing. - Part of fate#318196. - 4.0.81 ------------------------------------------------------------------- Wed Jan 31 11:53:57 UTC 2018 - igonzalezsosa@suse.com - AutoYaST: try to shrink new partitions/logical volumes proportionally when there is not enough space (bsc#1078418). - 4.0.80 ------------------------------------------------------------------- Wed Jan 31 09:25:07 UTC 2018 - ancor@suse.com - Partitioner: initial support for NFS (part of fate#318196) - Partitioner: removed useless tmpfs option - 4.0.79 ------------------------------------------------------------------- Tue Jan 30 12:00:27 UTC 2018 - jlopez@suse.com - Partitioner: allow to create LVM thin pools and volumes. - Fix transactions of devicegraphs. - Part of fate#318196. - 4.0.78 ------------------------------------------------------------------- Tue Jan 30 11:24:28 UTC 2018 - jlopez@suse.com - Partitioner: improve error message when trying to remove an used physical volume. ------------------------------------------------------------------- Thu Jan 25 16:00:29 UTC 2018 - shundhammer@suse.com - Add default mount options for /etc/fstab for ext2/3/4 and vfat (bsc#1066076) - 4.0.77 ------------------------------------------------------------------- Wed Jan 24 12:28:19 UTC 2018 - igonzalezsosa@suse.com - Properly detect snapshots subvolumes (bsc#1076321 and bsc#1076335). - 4.0.76 ------------------------------------------------------------------- Tue Jan 23 13:44:43 UTC 2018 - jlopez@suse.com - Partitioner: allow to resize LVM volume groups. - Part of fate#318196. - 4.0.75 ------------------------------------------------------------------- Tue Jan 23 13:01:39 UTC 2018 - ancor@suse.com - Partitioner: consider all sizes entered by the user as base of 2 despite the units not being consistent with the International System. Thus, 1KB (which in the IS actually means 1000 bytes) becomes equivalent to 1KiB (which is 1024 bytes). ------------------------------------------------------------------- Tue Jan 23 10:09:51 UTC 2018 - snwint@suse.com - fix proposal dialog error when there are no disks (bsc#1057430) ------------------------------------------------------------------- Mon Jan 22 19:33:46 UTC 2018 - jlopez@suse.com - Avoid partitioning checks error when using old settings format. - Needed for bsc#1059160, bsc#1055747 and bsc#1063957. ------------------------------------------------------------------- Mon Jan 22 15:55:46 UTC 2018 - ancor@suse.com - Partitioner: button to resize LVM logical volumes now works as expected (part of fate#31896). - 4.0.74 ------------------------------------------------------------------- Mon Jan 22 13:11:32 UTC 2018 - igonzalezsosa@suse.com - Consider all free spaces when deciding which partitions distribution is better (bsc#1077051). ------------------------------------------------------------------- Thu Jan 19 12:10:29 UTC 2018 - jlopez@suse.com - Fix TODOs labels in partitioner (bsc#1058652). - 4.0.73 ------------------------------------------------------------------- Fri Jan 19 11:31:14 UTC 2018 - jreidinger@suse.com - Fix subtracting arrays of devices (fixes multipath wires detection for bsc#1076766) - 4.0.72 ------------------------------------------------------------------- Fri Jan 19 09:50:54 UTC 2018 - ancor@suse.com - Partitioner: when creating partitions they are now aligned to hardware requirements (indispensable for DASD) and when possible also for optimal performance (bsc#1069860 and bsc#1072011). - Partitioner: adjusted alignment logic during resizing to match the new logic used during creation. - Partitioner: skip validation of disabled widgets in the dialog to select the size of a new partition. - Partitioner: fixed a crash and one inconsistency in the dialog to resize an existing partition. - 4.0.71 ------------------------------------------------------------------- Fri Jan 19 09:41:52 UTC 2018 - ancor@suse.com - Correctly open the expert partitioner when called from the Kubic/CaaSP summary screen (bsc#1076732) - 4.0.70 ------------------------------------------------------------------- Mon Jan 15 14:22:32 UTC 2018 - jlopez@suse.com - Added sanity checks for partitioning setup. - Partitioner: setup issues are shown to the user before continue. Mandatory product volumes are required according to control file. - Part of fate#31896 and fix for bsc#1059160, bsc#1055747 and bsc#1063957. - 4.0.69 ------------------------------------------------------------------- Mon Jan 15 12:51:01 UTC 2018 - ancor@suse.com - Some code reorganization regarding alignment and resizing. - Added to several places in the API the possibilty of using other alignment types, in addition to the optimal one. - Added a (temporary) workaround to a possible bug in libstorage-ng regarding alignment. ------------------------------------------------------------------- Tue Jan 9 15:36:15 UTC 2018 - lslezak@suse.cz - Added Mountable#persistent? (needed for bsc#1073696) - 4.0.68 ------------------------------------------------------------------- Mon Jan 8 22:16:30 UTC 2018 - ancor@suse.com - Added Devicegraph#find_by_any_name (needed for bsc#1073254) - 4.0.67 ------------------------------------------------------------------- Mon Jan 8 12:46:38 UTC 2018 - ancor@suse.com - Do not try to reuse UUID and label from unformatted swap partitions (bsc#1071515). - 4.0.66 ------------------------------------------------------------------- Mon Jan 8 11:52:30 UTC 2018 - igonzalezsosa@suse.com - Force the subvolume name to be relative (related to bsc#1073548) - 4.0.65 ------------------------------------------------------------------- Mon Jan 8 11:37:06 UTC 2018 - ancor@suse.com - Fixed error when calculating the proposal on top of a BIOS RAID (bsc#1067349) ------------------------------------------------------------------- Fri Dec 22 15:40:13 UTC 2017 - igonzalezsosa@suse.com - AutoYaST: export the enable_snapshots element (bsc#1073544) ------------------------------------------------------------------- Fri Dec 22 15:17:35 UTC 2017 - snwint@suse.com - rewrite SpaceMaker::resize_and_delete! to be more human-readable - 4.0.64 ------------------------------------------------------------------- Fri Dec 22 14:40:04 UTC 2017 - snwint@suse.com - fix unnecessary Windows partition deletion (bsc #1066386) - 4.0.63 ------------------------------------------------------------------- Fri Dec 22 12:35:29 UTC 2017 - snwint@suse.com - fix logic in GuidedProposal::calculate_proposal (bsc#1058027) - 4.0.62 ------------------------------------------------------------------- Fri Dec 22 10:26:05 UTC 2017 - igonzalezsosa@suse.com - Do not crash when showing an unhandled partition id (bsc#1068087) ------------------------------------------------------------------- Wed Dec 20 15:33:49 UTC 2017 - ancor@suse.com - Partitioner: support for deleting an LVM volume group. - Correct handling of orphan physical volume devices. - Fix for bsc#106956 and part of fate#31896. - 4.0.61 ------------------------------------------------------------------- Wed Dec 20 12:04:42 CET 2017 - aschnell@suse.com - added obsoletes (bsc#1073645) - 4.0.60 ------------------------------------------------------------------- Tue Dec 19 17:12:27 UTC 2017 - ancor@suse.com - Added BlkDevice.find_by_any_name (needed for bsc#1073254) - 4.0.59 ------------------------------------------------------------------- Tue Dec 19 14:05:33 UTC 2017 - jreidinger@suse.com - Add DeviceGraph#find_by_name call (needed for bsc#1072908) - 4.0.58 ------------------------------------------------------------------- Mon Dec 18 12:59:02 UTC 2017 - igonzalezsosa@suse.com - AutoYaST: Improve disklabel element handling (bsc#1073307). - 4.0.57 ------------------------------------------------------------------- Thu Dec 14 12:01:48 UTC 2017 - ancor@suse.com - Fixed a recently added unit test to not rely on libstorage-ng sorting. Related to bsc#1049901 and part of fate#31896. - 4.0.56 ------------------------------------------------------------------- Mon Dec 11 15:40:36 UTC 2017 - jlopez@suse.com - Partitioner: add buttons to Hard Disks section for creating new partitions and editing devices. - Part of fate#318196. - 4.0.55 ------------------------------------------------------------------- Mon Dec 11 15:32:28 UTC 2017 - ancor@suse.com - Improved how the proposal handles disks that are in use but don't have a partition table (directly formatted disks, disks that are direct members of an LVM or RAID, etc.). Preliminary fix for bsc#1071949 and bsc#1067670. - 4.0.54 ------------------------------------------------------------------- Mon Dec 11 12:56:35 UTC 2017 - jlopez@suse.com - Improve detection of efi and swap partitions. - bsc#1071775 and bsc#1065234 - 4.0.53 ------------------------------------------------------------------- Fri Dec 8 17:34:17 CET 2017 - locilka@suse.com - Fixed dependencies (yast2 >= 4.0.24) (fate#318196) - 4.0.52 ------------------------------------------------------------------- Tue Dec 5 14:32:26 UTC 2017 - igonzalezsosa@suse.com - AutoYaST: assign the correct partition_id to /boot/efi (bsc#1071167) - 4.0.51 ------------------------------------------------------------------- Tue Dec 5 06:46:00 UTC 2017 - ancor@suse.com - Don't trust any longer the order of any collection coming from libstorage-ng (related to bsc#1049901 and part of fate#31896). - 4.0.50 ------------------------------------------------------------------- Mon Dec 4 09:02:09 UTC 2017 - jlopez@suse.com - Partitoner: added support for resizing partitions (bsc#1057586). - Part of fate#318196. - 4.0.49 ------------------------------------------------------------------- Mon Dec 4 08:55:17 UTC 2017 - igonzalezsosa@suse.com - AutoYaST does not ignore the 'enable_snapshots' setting even if the list of partitions is missing (bsc#1070790). - 4.0.48 ------------------------------------------------------------------- Fri Dec 1 16:58:14 UTC 2017 - ancor@suse.com - Rely on the new improved mechanism of libstorage-ng to sort devices by name. Preparation for bsc#1049901 and part of fate#31896. - 4.0.47 ------------------------------------------------------------------- Fri Dec 1 15:34:11 UTC 2017 - igonzalezsosa@suse.com - Fix boot partition detection (bsc#1070621). - 4.0.46 ------------------------------------------------------------------- Fri Dec 1 12:27:34 UTC 2017 - igonzalezsosa@suse.com - AutoYaST honors 'use' and 'initialize' elements even if the list of partitions is missing (related to bsc#1065061). - 4.0.45 ------------------------------------------------------------------- Thu Nov 30 16:14:49 UTC 2017 - ancor@suse.com - Partitioner: added buttons to sort the devices being added to an MD RAID (part of fate#318196). - 4.0.44 ------------------------------------------------------------------- Thu Nov 30 16:13:18 UTC 2017 - igonzalezsosa@suse.com - Do not ignore start_multipath setting (bsc#1070343). - 4.0.43 ------------------------------------------------------------------- Wed Nov 29 13:54:41 UTC 2017 - snwint@suse.com - adjust list of partition ids in expert partitioner (bsc#1060993, fate#314888) - 4.0.42 ------------------------------------------------------------------- Tue Nov 28 13:35:34 UTC 2017 - igonzalezsosa@suse.com - AutoYaST: honor size=max for logical volumes (bsc#1070131). - 4.0.41 ------------------------------------------------------------------- Mon Nov 27 17:49:38 UTC 2017 - jlopez@suse.com - Allow to work with BIOS RAIDs as regular disks (bsc#1067349). - Allow to create partition table over directly formatted devices. - 4.0.40 ------------------------------------------------------------------- Mon Nov 27 17:08:52 UTC 2017 - snwint@suse.com - make PartitionTables::partition_id_supported? available - 4.0.39 ------------------------------------------------------------------- Fri Nov 24 13:25:34 UTC 2017 - ancor@suse.com - Fixed a problem when confirming the very same partitioning schema several times (bug#1069671). - 4.0.38 ------------------------------------------------------------------- Fri Nov 24 12:23:03 UTC 2017 - igonzalezsosa@suse.com - AutoYaST: safer handling of partition ids (bsc#1067207). - 4.0.37 ------------------------------------------------------------------- Thu Nov 23 15:27:23 UTC 2017 - igonzalezsosa@suse.com - AutoYaST: add support to resize partitions and logical volumes (bsc#1069505). - AutoYaST: fix detection of root partition when using LVM (bsc#1069647). - 4.0.36 ------------------------------------------------------------------- Thu Nov 23 13:05:31 UTC 2017 - ancor@suse.com - Ensure that disks considered for (auto)installation are always sorted in a stable and consistent way based on its device name. Preparation for bsc#1049901 and part of fate#31896. - 4.0.35 ------------------------------------------------------------------- Wed Nov 22 19:19:27 UTC 2017 - jlopez@suse.com - Partitioner: added support for resizing MD RAIDs. - Part of fate#318196. - 4.0.34 ------------------------------------------------------------------- Wed Nov 22 17:11:41 UTC 2017 - shundhammer@suse.com - No RAID chunk size below 64 kiB for most types of RAID (bsc#1065381) - 4.0.33 ------------------------------------------------------------------- Mon Nov 20 15:40:58 UTC 2017 - shundhammer@suse.com - Added "Create New Partition Table" in partitioner - Part of fate#318196. - 4.0.32 ------------------------------------------------------------------- Thu Nov 16 10:31:04 UTC 2017 - jlopez@suse.com - Improve logging: add wrapper param for guard method and dump xml representation of the devicegraph to the logs. - Part of fate#318196. - 4.0.31 ------------------------------------------------------------------- Wed Nov 15 15:55:51 UTC 2017 - ancor@suse.com - When proposing a partitions layout for installation, prefer getting big installations and arranging the partitions by their weights over creating adjacent partitions. Part of fate#318196. - 4.0.30 ------------------------------------------------------------------- Tue Nov 14 15:41:21 UTC 2017 - jlopez@suse.com - Partitioner: added support for creating volume groups. - Part of fate#318196. - 4.0.29 ------------------------------------------------------------------- Wed Nov 8 16:03:31 UTC 2017 - snwint@suse.com - safer handling of partition ids (bsc#1060993 - 4.0.28 ------------------------------------------------------------------- Wed Nov 8 14:45:22 UTC 2017 - igonzalezsosa@suse.com - AutoYaST: filter out old '@' entries when importing the list of subvolumes (bsc#1061253) - 4.0.27 ------------------------------------------------------------------- Wed Nov 8 10:07:09 UTC 2017 - ancor@suse.com - Added support in the UI of the guided setup for the new format of <volumes> in the control file. - Part of fate#318196. - 4.0.26 ------------------------------------------------------------------- Wed Nov 8 05:54:04 UTC 2017 - igonzalezsosa@suse.com - AutoYaST: fix space distribution when partition table does not exist (bsc#1065061) - AutoYaST: set partition tables type according to the profile - 4.0.25 ------------------------------------------------------------------- Tue Nov 7 13:48:43 UTC 2017 - jlopez@suse.com - Fix name of planned logical volumes. - Take into account real RAM size to plan volumes. - Add scenario tests using new partitioning settings. - Part of fate#318196. - 4.0.24 ------------------------------------------------------------------- Tue Nov 7 13:18:35 UTC 2017 - igonzalezsosa@suse.com - AutoYaST: adjust the list of allowed keys in skip lists (bsc#1065668) - 4.0.23 ------------------------------------------------------------------- Tue Nov 7 09:38:19 UTC 2017 - igonzalezsosa@suse.com - AutoYaST: add support for udev links in the <device/> element (bsc#1066320) - 4.0.22 ------------------------------------------------------------------- Fri Nov 3 15:11:42 UTC 2017 - igonzalezsosa@suse.com - AutoYaST: do not remove partitions that are supposed to be reused (bsc#1066398). - 4.0.21 ------------------------------------------------------------------- Fri Nov 3 15:04:24 UTC 2017 - jlopez@suse.com - Partitioner: support for deleting md raids. - Part of fate#318196. - 4.0.20 ------------------------------------------------------------------- Fri Nov 03 14:27:02 CET 2017 - aschnell@suse.com - do not query end of region if region is empty (bsc#1066290) - 4.0.19 ------------------------------------------------------------------- Thu Nov 2 17:58:28 UTC 2017 - igonzalezsosa@suse.com - AutoYaST: query hardware information on skip lists (bsc#1065668). - AutoYaST: support multi-valued keys on skip lists. - AutoYaST: do not crash when no suitable disk for installation is found. - 4.0.18 ------------------------------------------------------------------- Wed Nov 1 09:11:23 UTC 2017 - jlopez@suse.com - Partitioner: support for deleting logical volumes. - Part of fate#318196. - 4.0.17 ------------------------------------------------------------------- Wed Nov 1 08:23:17 UTC 2017 - igonzalezsosa@suse.com - AutoYaST: do not crash when an unknown key is used in a skip list (bsc#1065670). - 4.0.16 ------------------------------------------------------------------- Tue Oct 31 12:14:18 UTC 2017 - igonzalezsosa@suse.com - AutoYaST: fix reuse of partitions (bsc#1060637). - AutoYaST: improve error handling when trying to reuse a partition fails. - AutoYaST: when a problem is detected while creating a proposal, register in which section it was found. - AutoYaST: register an issue when a proposal does not contain a root (/) partition. - 4.0.15 ------------------------------------------------------------------- Mon Oct 30 13:32:02 UTC 2017 - ancor@suse.com - Added an option in the installer to run the expert partitioner with the current storage layout as starting point. - Possible fix for bsc#1055644 and part of fate#318196. - 4.0.14 ------------------------------------------------------------------- Fri Oct 27 11:33:55 UTC 2017 - jsrain@suse.cz - Limit maximal proposed size of EFI partition (bsc#1062775) - 4.0.13 ------------------------------------------------------------------- Thu Oct 26 15:30:53 UTC 2017 - ancor@suse.com - Partitioner: small adjustments in the verifications performed before running some wizards. ------------------------------------------------------------------- Wed Oct 25 17:28:48 UTC 2017 - jlopez@suse.com - Partitioner: allow to work with multipath devices. - bsc#1058373 and bsc#1028853. - Part of fate#318196. - 4.0.12 ------------------------------------------------------------------- Wed Oct 25 13:12:37 UTC 2017 - igonzalezsosa@suse.com - Add support to clone subvolumes when using AutoYaST (bsc#1064875) - 4.0.11 ------------------------------------------------------------------- Wed Oct 25 12:32:58 CEST 2017 - snwint@suse.de - adjust control.xml documentation - 4.0.10 ------------------------------------------------------------------- Mon Oct 23 17:53:27 UTC 2017 - jlopez@suse.com - Partitioner: show only option to create vg when there are no vgs. - Part of fate#318196. - 4.0.9 ------------------------------------------------------------------- Mon Oct 23 17:14:01 CEST 2017 - snwint@suse.de - have volumes in control.xml proposed by default (fate#318196) - 4.0.8 ------------------------------------------------------------------- Fri Oct 20 17:28:16 UTC 2017 - jlopez@suse.com - Partitioner: support for creating logical volumes. - Part of fate#318196. - 4.0.7 ------------------------------------------------------------------- Thu Oct 19 14:27:49 UTC 2017 - igonzalezsosa@suse.com - AutoYaST: add basic support for error handling - AutoYaST: handle 'size: auto' correctly - 4.0.6 ------------------------------------------------------------------- Thu Oct 19 13:05:35 UTC 2017 - jsrain@suse.cz - During installation, mount efivarfs in /mnt/sys/firmware/efivars if present in inst-sys (bsc#1063063) - 4.0.5 ------------------------------------------------------------------- Tue Oct 17 16:45:21 CEST 2017 - shundhammer@suse.de - Terminate extra space distribution loop if nothing could be distributed anymore (bsc#1063392) - 4.0.4 ------------------------------------------------------------------- Tue Oct 17 11:25:03 UTC 2017 - snwint@suse.com - finalize control.xml description (fate#318196) - 4.0.3 ------------------------------------------------------------------- Mon Oct 16 10:02:24 UTC 2017 - jlopez@suse.com - Add strategies to try an initial valid proposal, even changing settings when necessary. - Part of fate#318196. - 4.0.2 ------------------------------------------------------------------- Tue Oct 10 11:11:59 UTC 2017 - jlopez@suse.com - Adapt proposal to work with new format of proposal settings. - Part of fate#318196. - 4.0.1 ------------------------------------------------------------------- Mon Oct 9 12:29:13 UTC 2017 - igonzalezsosa@suse.com - AutoYaST: proper handling of the 'use' element allowing to delete a set of partitions (bsc#1061042) - AutoYaST: support for mkfs_options, fstopt and mount_by elements (bsc#1061289) - 4.0.0 ------------------------------------------------------------------- Fri Oct 6 07:11:35 UTC 2017 - jlopez@suse.com - Added support for reading new format of proposal settings. - Part of fate#318196. - 3.3.27 ------------------------------------------------------------------- Thu Oct 5 14:38:22 UTC 2017 - ancor@suse.com - Partitioner: don't return to the summary screen after each operation. - Partitioner: speedup the refresh time after each operation (by not querying the hostname again). - Both part of fate#318196. - 3.3.26 ------------------------------------------------------------------- Wed Oct 4 17:28:24 CEST 2017 - shundhammer@suse.de - Added disk.desktop file for partitioner (bsc#1059528) - 3.3.25 ------------------------------------------------------------------- Wed Oct 4 12:11:11 UTC 2017 - snwint@suse.com - separate planning strategies from DevicesPlanner into DevicesPlannerStrategies module - 3.3.24 ------------------------------------------------------------------- Tue Oct 3 07:06:32 UTC 2017 - ancor@suse.com - Partitioner: buttons to edit the filesystem in RAID and LVM LV. - Partitioner: correct positioning of some buttons. - Partitioner: allow to mount several swap devices. - All part of fate#318196. - 3.3.23 ------------------------------------------------------------------- Fri Sep 29 15:06:42 UTC 2017 - ancor@suse.com - Partitioner: option to create an MD RAID (part of fate#318196). - 3.3.22 ------------------------------------------------------------------- Fri Sep 29 10:54:54 UTC 2017 - jlopez@suse.com - Fix validation when trying to create a partition with custom size (bsc#1060864). - 3.3.21 ------------------------------------------------------------------- Tue Sep 26 16:47:44 CEST 2017 - shundhammer@suse.de - Implemented simple proposal for CASP (bsc#1058736) - 3.3.20 ------------------------------------------------------------------- Mon Sep 25 10:44:42 CEST 2017 - snwint@suse.de - updated installer hacks document: ssh key import works ------------------------------------------------------------------- Fri Sep 22 15:20:51 UTC 2017 - jlopez@suse.com - Avoid to reuse small efi partitions (bsc#1056640). - 3.3.19 ------------------------------------------------------------------- Thu Sep 21 14:54:28 UTC 2017 - ancor@suse.com - More backwards-compatible behavior when formatting partitions in the expert partitioner. - Checkbox to enable snapshots for "/" in the expert partitioner. - Both part of fate#318196 - 3.3.18 ------------------------------------------------------------------- Tue Sep 19 07:26:06 UTC 2017 - ancor@suse.com - Improved creation and modification of partitions in the Expert Partitioner (bsc#1057869, bsc#1057874). - Added button to define the Btrfs subvolumes directly during creation or modification. - 3.3.17 ------------------------------------------------------------------- Wed Sep 13 14:44:52 UTC 2017 - jreidinger@suse.com - add all full udev links and helper to list them all (useful for fixing bsc#1057604) - 3.3.16 ------------------------------------------------------------------- Wed Sep 13 14:03:00 UTC 2017 - snwint@suse.com - don't limit uefi to x86_64 (bsc#1056629) - 3.3.15 ------------------------------------------------------------------- Tue Sep 12 15:54:47 UTC 2017 - jlopez@suse.com - Fix proposal to not try to create more than 3 partitions in a DASD partition table (bsc#1058052). - 3.3.14 ------------------------------------------------------------------- Thu Sep 7 14:28:28 UTC 2017 - schubi@suse.de - AutoYaST: Temporary workaround to avoid crash when size 'auto' (which is still not supported) is used (bnc#1056182). - 3.3.13 ------------------------------------------------------------------- Thu Sep 7 13:45:07 UTC 2017 - jlopez@suse.com - Fix partitioner bug creating partition with custom size (bsc#1057049) - 3.3.12 ------------------------------------------------------------------- Thu Sep 7 08:34:59 UTC 2017 - ancor@suse.com - AutoYaST: support for Btrfs snapshots (part of fate#318196). - 3.3.11 ------------------------------------------------------------------- Wed Sep 6 15:33:27 UTC 2017 - jlopez@suse.com - Fix bug when formatting with expert partitioner (bsc#1057405). - 3.3.10 ------------------------------------------------------------------- Wed Sep 6 14:59:46 UTC 2017 - igonzalezsosa@suse.com - Ignore case when parsing sizes (bsc#1056715 and bsc#1055913). - 3.3.9 ------------------------------------------------------------------- Tue Sep 5 17:24:37 CEST 2017 - schubi@suse.de - AutoYaST: Handle sizes without unit correctly. (bnc#1056168) - 3.3.8 ------------------------------------------------------------------- Tue Sep 5 06:00:08 UTC 2017 - ancor@suse.com - Create Btrfs in the guided setup if requested to do so (part of fate#318196). - 3.3.7 ------------------------------------------------------------------- Wed Aug 30 15:44:35 UTC 2017 - jlopez@suse.com - Added overall summary for the expert partitioner. - Part of fate#318196 - 3.3.6 ------------------------------------------------------------------- Mon Aug 23 19:33:27 UTC 2017 - jlopez@suse.com - Added methods to save user data into libstorage-ng objects. - Added subvolume shadowing control to the expert partitioner. - Added mount point validation to the expert partitioner. - Removed Planned::BtrfsSubvolume class. - Part of fate#318196 - 3.3.5 ------------------------------------------------------------------- Mon Aug 21 22:47:04 UTC 2017 - knut.anderssen@suse.com - Added support for legacy filesystems (fate#323394). - 3.3.4 ------------------------------------------------------------------- Mon Aug 21 13:40:03 CEST 2017 - snwint@suse.de - adjust package description in spec file ------------------------------------------------------------------- Mon Aug 21 10:20:59 UTC 2017 - ancor@suse.com - When displaying partition ids to the user, use names that are more similar to old yast-storage (part of fate#318196). - 3.3.3 ------------------------------------------------------------------- Fri Aug 18 08:56:36 UTC 2017 - knut.anderssen@suse.com - ReiserFS is not allowed anymore, it was already removed in SLE 12 for new installations and was only supported for upgrades. (fate#323394) - 3.3.2 ------------------------------------------------------------------- Wed Aug 16 10:24:07 UTC 2017 - ancor@suse.com - Added deactivation of virtual devices (multipath, LVM, etc.) to the public API. - Initial management of Btrfs subvolumes in the expert partitioner. - Both as part of fate#318196 - 3.3.1 ------------------------------------------------------------------- Mon Jul 24 16:17:03 UTC 2017 - jlopez@suse.com - Removed temporary StorageManager API. - 0.1.32 ------------------------------------------------------------------- Thu Jul 20 14:54:17 UTC 2017 - ancor@suse.com - Added pop-up to ask the user about multipath activation. ------------------------------------------------------------------- Thu Jul 20 10:45:36 UTC 2017 - ancor@suse.com - Added Btrfs subvolumes support to the AutoYaST customized partitioning. ------------------------------------------------------------------- Tue Jul 18 11:43:26 UTC 2017 - ancor@suse.com - Adjusted the guided proposal to work properly on scenarios with DM RAIDs. ------------------------------------------------------------------- Mon Jul 17 09:07:39 UTC 2017 - ancor@suse.com - Adjusted the guided proposal to work properly on scenarios with Multipath I/O. ------------------------------------------------------------------- Wed Jul 12 15:37:16 UTC 2017 - ancor@suse.com - Replaced the original prototype of the expert partitioner with the one coming from yast2-partitioner. - Added #supported_fstab_options and #default_partition_id methods to Y2Storage::Filesystems::Type. - Removed Y2Storage::DevicesLists and not longer needed modules from Y2Storage::Refinements - 0.1.31 ------------------------------------------------------------------- Tue Jul 11 11:18:06 UTC 2017 - jreidinger@suse.com - Added PartitionId#to_human_string and PartitionId::formattable? - 0.1.30 ------------------------------------------------------------------- Thu Jul 6 08:11:59 UTC 2017 - gsouza@suse.com - Added verifications for disk in network. - 0.1.29 ------------------------------------------------------------------- Tue Jul 4 14:29:40 UTC 2017 - jlopez@suse.com - Added new class Y2Storage::Proposal::Base. - Proper assignment of default values for new proposals. - 0.1.28 ------------------------------------------------------------------- Tue Jul 4 08:32:12 UTC 2017 - ancor@suse.com - Added AutoinstProfile::PartitioningSection which allows to export the current system (or any other devicegraph) to an AutoYaST profile (only plain partitions supported so far). - 0.1.27 ------------------------------------------------------------------- Mon Jul 3 15:50:43 UTC 2017 - jlopez@suse.com - Adapt proposal to different situations (disable home, snapshots, etc) - 0.1.26 ------------------------------------------------------------------- Mon Jul 3 13:36:17 UTC 2017 - jreidinger@suse.com - add LvmVg#basename - add PartitionTables::Base#delete_all_partitions - add logger to all devices - add LvmVg#name - 0.1.25 ------------------------------------------------------------------- Tue Jun 27 15:05:52 UTC 2017 - igonzalezsosa@suse.com - Add LVM support for AutoYaST partitioning (bsc#1044697). - 0.1.24 ------------------------------------------------------------------- Tue Jun 27 09:04:58 UTC 2017 - ancor@suse.com - More robust Y2Storage::StorageManager#probe ------------------------------------------------------------------- Mon Jun 26 11:56:23 UTC 2017 - jreidinger@suse.com - Added Y2Storage::MdParity#to_human_string and Y2Storage::MdLevel#to_human_string - 0.1.23 ------------------------------------------------------------------- Mon Jun 26 08:56:07 UTC 2017 - aschnell@suse.com - Added Y2Storage::Md wrapper - 0.1.22 ------------------------------------------------------------------- Mon Jun 19 12:30:46 UTC 2017 - mvidner@suse.com - Added Y2Storage::DiskSize#human_floor, Y2Storage::Region#size - 0.1.21 ------------------------------------------------------------------- Mon Jun 19 08:33:19 UTC 2017 - igonzalezsosa@suse.com - AutoinstProposal is loaded with the rest of the proposal classes when 'y2storage' is required. - 0.1.20 ------------------------------------------------------------------- Mon Jun 19 06:58:54 UTC 2017 - jilopez@localhost - Adjustments to DASD to ensure the proposal works as expected in such devices. - Added Devicegraph#disk_devices to get all DASDs and disks. - DASD support added to YAML reader and writer. ------------------------------------------------------------------- Fri Jun 16 12:47:40 UTC 2017 - igonzalezsosa@suse.com - Add basic support for AutoYaST customized partitioning (only plain partitions are supported) - 0.1.19 ------------------------------------------------------------------- Thu Jun 15 07:17:28 UTC 2017 - jreidinger@suse.com - Add new method StorageManager.fake_from_xml for easy loading of xml device graphs ------------------------------------------------------------------- Wed Jun 14 20:21:27 CEST 2017 - aschnell@suse.com - added probe function to StorageManager - 0.1.18 ------------------------------------------------------------------- Thu Jun 8 09:36:29 UTC 2017 - ancor@suse.com - Added new method BlkDevice#to_be_formatted? (needed by yast2-partitioner). - 0.1.17 ------------------------------------------------------------------- Tue Jun 6 17:57:16 CEST 2017 - shundhammer@suse.de - Don't insist on installing filesystem support packages that are not available in any repo (bsc#1039830) - 0.1.16 ------------------------------------------------------------------- Thu Jun 1 10:27:25 UTC 2017 - ancor@suse.com - Fixed a bug in LvmLv#stripe_size= ------------------------------------------------------------------- Mon May 22 10:58:24 UTC 2017 - ancor@suse.com - Refactored the proposal code in preparation for the AutoYaST implementation. Removed PlannedVolume and PlannedVolumesList classes in favor of new more specific classes in the Planned namespace. - Fixed the proposal to never propose subvolumes that would be shadowed by another proposed device. ------------------------------------------------------------------- Wed May 17 11:53:56 UTC 2017 - jreidinger@suse.com - Add to Y2Storage::PartitionTables::Type#to_human_string - 0.1.15 ------------------------------------------------------------------- Thu May 4 13:21:28 CEST 2017 - schubi@suse.de - Added SCR agent .etc.mtab again until we have a proper alternative for it (still needed in yast2-users). - 0.1.14 ------------------------------------------------------------------- Thu May 4 09:07:44 UTC 2017 - ancor@suse.com - Changelog entry to document stuff that was left behind. See below. - Installation proposal now generates Btrfs subvolumes when needed (according to control.xml and a fallback list). - Improved and fully functional Guided Setup. - Added new fields to ProposalSettings and renamed others (xxx_size instead of xxx_disk_size). Similar changes in PlannedVolume. - New smaller and more convenient API for DiskAnalyzer. - Many documentation (Yardoc) improvements and fixes. - Added dummy activate callbacks (for activating a previous LUKS). - The installer now saves a xml representation of the probed and staging devicegraphs before proceeding with the installation. - New API for accessing the libstorage objects from Ruby: * New classes in the Y2Storage namespace offering a wrapper around the corresponding libstorage classes and enums: Actiongraph, AlignPolicy, BlkDevice, BtrfsSubvolume, Dasd, DasdFormat, DasdType, DataTransport, Device, Devicegraph, Disk, Encryption, LvmLv, LvmPv, LvmVg, Mountable, Partition, PartitionId, PartitionType, Partitionable, Region and ResizeInfo. * Mixins StorageClassWrapper and StorageEnumWrapper to define more wrappers as needed. * Removed EnumMappings. * Removed most refinements in Y2Storage, functionality moved to the new classes. * Marked DevicesList as deprecated. * Marked some refinements as deprecated. ------------------------------------------------------------------- Tue Apr 25 08:50:10 UTC 2017 - jreidinger@suse.com - add Gpt#pmbr_boot(?/=) methods for protective MBR - 0.1.13 ------------------------------------------------------------------- Thu Mar 23 08:18:36 UTC 2017 - jilopez@localhost - Adapted prepdisk client to work in update mode. ------------------------------------------------------------------- Tue Mar 21 17:11:37 CET 2017 - schubi@suse.de - Added to_s in ProposalSettings ------------------------------------------------------------------- Thu Mar 9 12:47:11 UTC 2017 - ancor@suse.com - Partially adjust the proposal settings according to control.xml. ------------------------------------------------------------------- Fri Mar 3 12:30:12 UTC 2017 - ancor@suse.com - Improved the EnumMappings module. - 0.1.12 ------------------------------------------------------------------- Thu Feb 16 11:37:57 UTC 2017 - ancor@suse.com - Improvements in the devicegraph query interface: added an EncryptionLists class and adapted all the other classes to take several encryption-related scenarios into account. - 0.1.11 ------------------------------------------------------------------- Wed Feb 8 13:19:24 UTC 2017 - ancor@suse.com - Added a prototype of the "Guided Setup" wizard to configure the proposal settings. ------------------------------------------------------------------- Wed Jan 25 14:35:38 UTC 2017 - ancor@suse.com - Proper management of completely empty disks (no partition table, no file-system and no LVM PV) in the proposal. - Improved FreeDiskSpace and Disk#free_spaces to correctly handle disks without partition table. - 0.1.10 ------------------------------------------------------------------- Thu Jan 19 10:54:22 CET 2017 - shundhammer@suse.de - Install storage-related software packages as needed: Migrated UsedStorageFeatures to storage-ng and added PackageHandler - 0.1.9 ------------------------------------------------------------------- Tue Jan 17 12:07:18 UTC 2017 - ancor@suse.com - Improved StorageManager that complies to the Singleton pattern and includes a revision counter for the staging devicegraph. - 0.1.8 ------------------------------------------------------------------- Mon Jan 16 12:27:03 UTC 2017 - ancor@suse.com - Added 'fstab_options' key to the YAML representation of the devicegraphs used for testing. - 0.1.7 ------------------------------------------------------------------- Thu Jan 5 15:27:02 UTC 2017 - ancor@suse.com - Y2Storage::DiskAnalyzer - distinguish disks with no MBR gap (0 bytes gap) from cases where the MBR gap is not applicable. This fixes the proposal for some LVM scenarios with legacy boot. ------------------------------------------------------------------- Fri Dec 23 12:44:24 UTC 2016 - ancor@suse.com - Removed unused ProposalDemo client (kind of obsoleted by Dialogs::InstDiskProposal) ------------------------------------------------------------------- Wed Dec 21 12:01:32 UTC 2016 - ancor@suse.com - Improvements in the devicegraph query interface (DisksLists#with_name_or_partition) - 0.1.6 ------------------------------------------------------------------- Tue Dec 20 06:39:28 UTC 2016 - ancor@suse.com - Fixed partitioning proposal to not fail when trying to create very small partitions (like bios_boot), to work better with uneven spaces (not divisible by the minimal grain) and to reduce the gaps between partitions. ------------------------------------------------------------------- Wed Dec 14 16:01:00 UTC 2016 - ancor@suse.com - Write more precise information in the logs (DiskSize#to_s) ------------------------------------------------------------------- Tue Dec 13 11:11:20 UTC 2016 - ancor@suse.com - Proposal does not try to set the boot flag if not supported (for example, GPT partition tables) ------------------------------------------------------------------- Fri Dec 9 10:30:33 UTC 2016 - aschnell@suse.com - Adapted to several changes in libstorage-ng ------------------------------------------------------------------- Fri Nov 25 16:39:13 UTC 2016 - ancor@suse.com - Improvements in the LVM-based proposal ------------------------------------------------------------------- Tue Nov 22 15:32:41 UTC 2016 - ancor@suse.com - Improvements in Refinements::DevicegraphLists ------------------------------------------------------------------- Tue Nov 22 12:28:39 UTC 2016 - ancor@suse.com - Convenience method to check for GPT - Several methods added to most of the DevicesLists classes - 0.1.5 ------------------------------------------------------------------- Thu Oct 27 12:49:59 UTC 2016 - ancor@suse.com - Better management of LVM partitions in Proposal::SpaceMaker ------------------------------------------------------------------- Thu Oct 27 13:46:39 CEST 2016 - aschnell@suse.com - mount special filesystems in target during installation ------------------------------------------------------------------- Wed Oct 26 12:26:58 UTC 2016 - ancor@suse.com - LVM classes added to Refinements::DevicegraphLists ------------------------------------------------------------------- Wed Oct 12 13:38:38 UTC 2016 - cwh@suse.com - Use own textdomain (storage-ng instead of storage) (bsc#1004050) - 0.1.4 ------------------------------------------------------------------- Fri Sep 30 14:05:08 UTC 2016 - ancor@suse.com - Added new inst_prepdisk client - first version in which the installer commits the changes to the target disk(s). - 0.1.3 ------------------------------------------------------------------- Tue Sep 27 06:00:45 UTC 2016 - ancor@suse.com - More reusable DiskAnalyzer. - Use libstorage mechanisms to check for windows partitions. - Added new minimalistic inst_disk_proposal client. - 0.1.2 ------------------------------------------------------------------- Mon Aug 1 13:11:13 UTC 2016 - ancor@suse.com - Namespaces adapted to avoid conflicts with old yast2-storage and to follow the new YaST convention. - 0.1.1 ------------------------------------------------------------------- Thu Feb 25 16:35:57 CET 2016 - aschnell@suse.com - initial package with yast2-storage-ng, successor of yast2-storage
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
