openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File lzip.changes of Package lzip

-------------------------------------------------------------------
Mon Mar  5 19:35:24 UTC 2018 - jengelh@inai.de

- Update to new upstream release 1.20
  * The option "--loose-trailing" has been added.
  * The test used by clzip to discriminate trailing data from a
    corrupt header in multimember or concatenated files has been
    improved to a Hamming distance of 3.
  * The "-S" option now keeps input files unchanged.

-------------------------------------------------------------------
Tue Jan 23 22:42:14 UTC 2018 - avindra@opensuse.org

- Update to version 1.19
  * The option '-l, --list' has been ported from lziprecover.
  * Don't allow mixing different operations (-d, -l or -t).
  * Compression time of option '-0' has been slightly reduced.
  * Decompression time has been reduced by 2%.
  * main.cc: Continue testing if any input file is a terminal.
  * main.cc: Show trailing data in both hexadecimal and ASCII.
  * encoder.cc (Matchfinder_base): Verify size passed to new.
  * file_index.cc: Improve detection of bad dict and trailing data.
  * lzip.h: Unified messages for bad magic, trailing data, etc.
- switch to https in source urls

-------------------------------------------------------------------
Sun Jun  5 11:46:42 UTC 2016 - mpluskal@suse.com

- Update to version 1.18:
  * main.cc: Added new option '-a, --trailing-error'.
  * Decompression time has been reduced by 2%.
  * decoder.cc (verify_trailer): Removed test of final code.
  * main.cc (main): Delete '--output' file if infd is a terminal.
  * main.cc (main): Don't use stdin more than once.
  * Removed decompression support for version 0 files.
  * lzip.texi: Added chapter 'Trailing data'.
  * configure: Avoid warning on some shells when testing for g++.
  * Makefile.in: Detect the existence of install-info.
  * testsuite/check.sh: A POSIX shell is required to run the tests.
  * testsuite/check.sh: Don't check error messages.

-------------------------------------------------------------------
Thu Aug  6 08:15:49 UTC 2015 - jengelh@inai.de

- Update to new upstream release 1.17
* The compression code has been reorganized to ease the porting of
  the fast encoder to clzip and lzlib.
* The new chapter "Quality assurance" has been added to the manual.

-------------------------------------------------------------------
Wed Oct  1 11:07:33 UTC 2014 - jengelh@inai.de

- Update to new upstream release 1.16
* Compression ratio of option -9 has been slightly increased.
* Compression time has been reduced by 4%.
* `lzip -0` is now comparable in compression speed and ratio to
  `gzip -6` (gzip's default compression level).
* Copying of file dates, permissions, and ownership now behaves
  like `cp -p`. (If the user ID or the group ID cannot be
  duplicated, the file permission bits S_ISUID and S_ISGID are
  cleared).
* The license has been changed to GPL version 2 or later.

-------------------------------------------------------------------
Fri Oct  4 11:19:28 UTC 2013 - jengelh@inai.de

- Update to new upstream release 1.15
* This release shows the progress of compression at verbosity
  level 2 (-vv).
* The chapter "Stream format" and the appendix "Reference source
  code" have been added to the manual.

-------------------------------------------------------------------
Mon Apr 01 14:46:38 UTC 2013 - pascal.bleser@opensuse.org

- update to 1.14:
  * Multi-step trials have been implemented
  * Compression ratio has been slightly increased
  * Compression time has been reduced by 5%
  * Decompression time has been reduced by 12%

-------------------------------------------------------------------
Tue Sep  4 08:13:44 UTC 2012 - cfarrell@suse.com

- license update: GPL-3.0+
  Use SPDX format (http://www.spdx.org/licenses)

-------------------------------------------------------------------
Sun Mar 18 17:49:42 UTC 2012 - pascal.bleser@opensuse.org

- update to 1.13:
  * lziprecover has been moved to its own package
  * inability to change output file attributes has been downgraded from error
    to warning
  * compression time of option "-0" has been reduced by 2%
  * a reorganization of the compression code has been made
  * a small change has been made in the "--help" output and man page
  * quote characters in messages have been changed as advised by GNU Coding
    Standards

-------------------------------------------------------------------
Fri May 13 08:50:06 UTC 2011 - pascal.bleser@opensuse.org

- update to 1.12:
  * the option "-F, --recompress", which forces recompression of files whose
    name already has the ".lz" or ".tlz" suffix, has been added
  * for large values of "--match-length", the compression ratio has been
    slightly increased, and compression time has been reduced by up to 6%
  * the compression time of the option "-0" has been reduced by 2%
  * this release will print only one status line for each multi-member file
    when only one "-v" is specified
  * it will print up to 6 bytes of trailing garbage when "-vvvv" is specified
  * it does not show the message "and `--stdout' was not specified" for file
    types that can't be read (directories, etc)

-------------------------------------------------------------------
Mon Sep 27 12:45:42 UTC 2010 - pascal.bleser@opensuse.org

- update to 1.11:
  * match length limit set by options -1 to -8 has been reduced to extend the
    range of use towards gzip; lower numbers now compress less but faster
  * also, a "-0" option as fast as "gzip -9" has been added
  * the compression of option -9 has been slightly increased
  * the "--merge" option, which tries to produce a correct file by merging the
    good parts of two or more damaged copies, has been added to lziprecover:
    for large files with small errors, the probability of producing a correct
    file approaches 100 percent
  * lziprecover is now able to repair any 1-byte error in the lzma stream of
    damaged lzip files

-------------------------------------------------------------------
Sat Apr 10 00:13:18 UTC 2010 - pascal.bleser@opensuse.org

- update to 1.10:
  * a file specified with the "-o" option is now created with write permission
    for all if umask allows it, and it is deleted if lzip is interrupted by the
    user
  * the dictionary size for the options -2, -3, -4, and -8 has been changed to
    improve linearity of compressed sizes

-------------------------------------------------------------------
Tue Jan 19 00:00:00 UTC 2010 - pascal.bleser@opensuse.org

- update to 1.9:
  * Lzip now returns at least 1 if closing stdout fails
  * lintian warnings in Debian about man pages have been fixed
  * the "COPYING" file is no longer used as data for testing

-------------------------------------------------------------------
Fri Sep  4 00:00:00 UTC 2009 - pascal.bleser@opensuse.org

- update to 1.8:
  * compression time has been reduced by 4%

- changes from 1.7:
  * lzdiff and lzgrep have been renamed to zdiff and zgrep and moved to the new
    package zutils (http://freshmeat.net/projects/zutils)
  * compilation warnings on systems where uint32_t... != unsigned int have been
    fixed.

-------------------------------------------------------------------
Tue Jun 23 00:00:00 UTC 2009 - pascal.bleser@opensuse.org

- update to 1.6:
  * decompression time has been reduced by 17%
  * decompression support for the "Sync Flush marker" from lzlib has been added
  * man pages for lzdiff, lzgrep, and lziprecover have been added to the
    distribution
  * memory use has been reduced to 9x if the input file is smaller than
    dictionary size limit
  * flush calls have been added to decompressor to allow partial recovery of
    the uncompressed data when decompressing a corrupt file
  * the dependence of "--test" on the existence of "/dev/null" has been removed
  * some "bashisms" have been removed from lzdiff and lzgrep

-------------------------------------------------------------------
Wed Apr 15 00:00:00 UTC 2009 - pascal.bleser@opensuse.org

- update to 1.5

-------------------------------------------------------------------
Mon Dec 22 00:00:00 UTC 2008 - guru@unixtech.be

- update to 1.3

-------------------------------------------------------------------
Tue Nov 18 00:00:00 UTC 2008 - guru@unixtech.be

- update to 1.1:
  * the short name of the option "--dictionary-size" has been changed to "-s"
  * the short name of the option "--match-length" has been changed to "-m"
  * some user messages have been improved

-------------------------------------------------------------------
Tue Oct 14 00:00:00 UTC 2008 - guru@unixtech.be

- update to 1.0:
  * small changes have been made to the documentation and user messages

-------------------------------------------------------------------
Wed Oct  1 00:00:00 UTC 2008 - guru@unixtech.be

- update to 0.5:
  * decompression speed has been improved by 1%

-------------------------------------------------------------------
Wed Sep 24 00:00:00 UTC 2008 - guru@unixtech.be

- update to 0.4:
  * this release regains the compression ratio of version 0.2 with a speed
    that is a 5% faster
  * a compilation problem on systems where "size_t" is different from
    "unsigned int" has been fixed

-------------------------------------------------------------------
Mon Sep 15 00:00:00 UTC 2008 - guru@unixtech.be

- new package

Places

File lzip.changes of Package lzip

Places