File yast2-printer.changes of Package yast2-printer

Overview Repositories Revisions Requests Users Attributes Meta

File yast2-printer.changes of Package yast2-printer (Revision ce4aaafa7cbf4a1372643a7c041082cb)

Currently displaying revision ce4aaafa7cbf4a1372643a7c041082cb , Show latest

-------------------------------------------------------------------
Thu May  6 15:49:01 CEST 2010 - jsmeix@suse.de

- yast2-printer can launch hp-setup to set up HP devices.
  When hp-setup has finished, it is likely that a new print queue
  was created by it and therefore basicadd.ycp should call
  Printerlib::WaitForUpdatedConfigFiles after hp-setup finished
  (see Novell/Suse Bugzilla bnc#603247).
- 2.19.10

-------------------------------------------------------------------
Thu Apr 29 15:48:27 CEST 2010 - jsmeix@suse.de

- Do no longer show positive feedback in TestClientOnlyServer
  because this would cause annoying popups for the user
  because in most cases TestClientOnlyServer is called
  indirectly without a button click.
  Only show positive feedback in printingvianetwork.ycp
  when TestClientOnlyServer is called by the user when
  clicking the [Test Server] button.
- 2.19.9

-------------------------------------------------------------------
Fri Apr 23 11:39:13 CEST 2010 - jsmeix@suse.de

- In overview.ycp added an initial responsive test if CUPS server
  is accessible by using the TestClientOnlyServer function
  which was moved from printingvianetwork.ycp to Printer.ycp
  and adapted so that it can be used both for overview.ycp and
  printingvianetwork.ycp (see Novell/Suse Bugzilla bnc#595612).
- Fixed English spelling in basicadd.ycp, basicmodify.ycp,
  and Printerlib.ycp (see Novell/Suse Bugzilla bnc#596526).
- In overview.ycp for testpage printing added "tail -n 20"
  when the CUPS error_log info is grepped to avoid a too
  tall popup which may show too many lines (in particular
  in case of the oververbose Gutenprint driver).
- In overview.ycp show a generic text when the user selected
  that testpage printing had failed for a local queue but
  there are no messages in /var/log/cups/error_log regarding
  the testpage print job.
- 2.19.8

-------------------------------------------------------------------
Tue Mar 30 14:59:45 CEST 2010 - jsmeix@suse.de

- Further cleanup and enhancement of printer_auto.ycp:
  Added CreateBackupFile to backup /etc/cups/cupsd.conf
  and /etc/cups/client.conf before "Reset" and "Write".
  Added restart of local cupsd in "Change" if its config
  was reset to system defaults by "Reset" before.
  Made ReadFileContent safe against possible end of CDATA
  section strings "]]>" inside file contets.
- 2.19.7

-------------------------------------------------------------------
Thu Mar 18 16:17:41 CET 2010 - jsmeix@suse.de

- Major cleanup of the AutoYaST printer client printer_auto.ycp
  (see Novell/Suse Bugzilla bnc#588679):
  Now there is verbatim cupsd.conf and client.conf
  as XML CDATA in the AutoYaST control file.
  This results a new AutoYaST control file structure:
    <printer>
      <client_conf_content>
        <file_contents><![CDATA[
    ... verbatim content of /etc/cups/client.conf ...
    ]]></file_contents>
      </client_conf_content>
      <cupsd_conf_content>
        <file_contents><![CDATA[
    ... verbatim content of /etc/cups/cupsd.conf ...
    ]]></file_contents>
      </cupsd_conf_content>
    </printer>
  Provide a new src/printer.rnc to match the
  new AutoYaST control file structure.
- In src/printer.desktop added the line
  X-SuSE-YaST-AutoInstSchema=printer.rnc
  to pull in printer.rnc when yast2-schema is build
  (see Novell/Suse Bugzilla bnc#588998).
- In printer_proposal.ycp use Printer::DeriveModelName
  and Printer::DeriveDriverFilterString the same way
  as in basicadd.ycp so that the proposal results now
  the same queue setup as if the user would have just
  clicked [OK] in the BasicAddDialog.
- Prefer "manufacturer-PPD" over "recommended" PPD
  (see Novell/Suse Bugzilla bnc#589371).
- 2.19.6

-------------------------------------------------------------------
Wed Mar  3 12:18:38 CET 2010 - jsmeix@suse.de

- Fixed tools/autodetect_print_queues by testing for the
  positive "lpstat -r" output "scheduler is running"
  the same way as already implemented in src/Printerlib.ycp
  (bnc#584540).
- Fixed testpage printing in overview.ycp:
  When testpage printing failed, the queue may have
  become disabled so that a refresh of the overview content
  is needed (e.g. to show the new queue state).
  Added support to show the particular logging info
  in /var/log/cups/error_log for the testpage print job
  when the user clicked "Testpage printing failed".
- In CUPS version 1.5 SCSI printer support will be dropped,
  see http://www.cups.org/str.php?L3500
  i.e. the CUPS scsi backend will be dropped.
  Therefore in yast2-printer SCSI printer support is
  also dropped in connectionwizard.ycp and helps.ycp.
  Nevertheless because of the dropped scsi backend
  there is at least a user notification Popup::ErrorDetails
  if the scsi backend is used for a queue but there
  is no /usr/lib*/cups/backend/scsi (bnc#580121).
- In none of the bash scripts for yast2-printer bash globbing
  is needed. Actually in all those scripts no bash globbing
  should happen. Therefore I added to all those scripts
  a "set -f" line (bnc #575056).
- 2.19.5

-------------------------------------------------------------------
Fri Jan 22 15:23:18 CET 2010 - jsmeix@suse.de

- Fixed search usability in basicadd.ycp and basicmodify.ycp
  in each run of the user input while loop before UI::UserInput()
  by first replacing the [Search for] button with itself
  with `opt(`default) to enforce this default regardless
  whatever function call or UI bug (see bnc#558900)
  may have changed it and then additionally
  but only when the user is already searching drivers,
  set the focus to the InputField for the search string
  so that the user can just type in another search string.
  In contrast when the user is not already searching drivers,
  it is annoying in particular in the text-only ncurses UI
  when the focus becomes always set to the search string
  InputField for each run of the user input while loop.
- In basicadd.ycp and basicmodify.ycp re-rename
  the PushButton to launch the DriverAdd dialog
  from "Install Driver" to "Driver Packages"
  because the former can be confused by the user
  with the functionality what the [OK] button
  in basicadd.ycp and basicmodify.ycp does i.e. to
  install the print queue with the selected driver.
- Improved help text 'regarding firewall' and
  added link to 'SDB:CUPS and SANE Firewall settings' at
  http://en.opensuse.org/SDB:CUPS_and_SANE_Firewall_settings
- 2.19.4

-------------------------------------------------------------------
Tue Jan 19 16:21:03 CET 2010 - jsmeix@suse.de

- More meaningful wording in BasicAdd and BasicModify dialogs
  in particular the following PushButton renames:
  From "More Connections" to "Detect More",
  from "Search" to "Search for",
  from "More Drivers" to "Find More",
  from "Add Driver" to "Install Driver",
  from "Set Name" to "Set Arbitrary Name".
- 2.19.3

------------------------------------------------------------------
Wed Jan 13 18:56:03 CET 2010 - kmachalkova@suse.cz

- Adjusted .desktop file(s) to wrap /sbin/yast2/ calls in xdg-su
  where root privileges are needed, removed X-KDE-SubstituteUID key 
  (bnc#540627)

-------------------------------------------------------------------
Tue Dec 22 14:11:37 CET 2009 - jsmeix@suse.de

- Added percent encoding of URI values in the "Connection Wizard"
  (see Novell/Suse Bugzilla bnc#561626).
- Added support to launch 'hp-setup' from the BasicAdd dialog
  to provide setup support for HP printers which require
  a proprietary plugin to be downloaded and installed
  and better setup support for HP network printers and
  HP all-in-one devices (HP's own tool 'hp-setup' implements
  special handling for special HP devices better than YaST).
- 2.19.2

-------------------------------------------------------------------
Wed Dec  9 12:51:58 CET 2009 - jsmeix@suse.de

- An existing connection can be modified by the "Connection Wizard"
  which launches with a matching sub-dialog where the values
  of the existing connection are preset or it falls back to the
  "Specify Arbitrary Device URI" sub-dialog if the existing
  URI scheme does not match to a more specific sub-dialog
  (see Novell/Suse Bugzilla bnc#553871).
- Added support for current_queue_name and current_device_uri in
  Printer.ycp, overview.ycp, basicadd.ycp, and basicmodify.ycp
  which means that the currently used queue and/or connection
  is preselected in the Overview and/or  Add/Modify dialogs
  (i.e. there no longer only the default Table widget
   prelelection which preselects the topmost item).
- Replaced several duplicated code blocks in basicmodify.ycp,
  basicadd.ycp, and connectionwizard.ycp by calling the new
  added DeriveModelName and DeriveDriverFilterString functions
  in Printer.ycp.
- Added "bugfix-support" for username and password
  in ipp/http URIs and for username in lpd URIs.
  "Bugfix-support" means that there is no support
  to set up URIs with those stuff because the CUPS
  main author Michael Sweet really does not want to
  encourage its use but when it is already there
  in an existing URI, it is at least shown correctly.
  Usually username and password components for
  ipp/http and lpd URIs are shown in the matching
  "Connection Wizard" sub-dialog in the hostname field
  in the form username:password@hostname for ipp/http
  and username@hostname for lpd URIs
  (see Novell/Suse Bugzilla bnc#512549).
- Connection Wizard: test connection does no longer
  require printer manufacturer
  (see Novell/Suse Bugzilla bnc#536461).
- Enhanced error messages in the test_remote_* tools
  to indicate possible reasons for the error
  (see Novell/Suse Bugzilla bnc#553872).
- In Printer.ycp replaced "Detected printers"
  by "Printer detection finished"
  (see Novell/Suse Bugzilla bnc#533584).
- Added BrowsePoll support for "Print via Network"
  (see Novell/Suse Bugzilla bnc#433047).
- Added bugfixes and minor support for local classes:
  Local classes are shown as "class" (not as "remote")
  and one can delete a local class but there is no support
  to add or edit classes.
- 2.19.1

-------------------------------------------------------------------
Fri Oct 30 11:53:06 CET 2009 - jsmeix@suse.de

- Added a generic test if a firewall is used to Printerlib.ycp
  and if yes show popup info to the user regarding CUPS+firewall
  for the "Print via Network" and "Share Printers" dialogs
  (see Novell/Suse Bugzilla bnc#549065).
- 2.19.0

-------------------------------------------------------------------
Wed Aug  5 12:38:57 CEST 2009 - jsmeix@suse.de

- In the Autoconfig dialog autoconfig.ycp added support for
  udev-configure-printer which replaces cups-autoconfig
  because cups-autoconfig is deprecated because
  cups-autoconfig uses HAL which is deprecated, see
  http://lists.freedesktop.org/archives/hal/2009-June/013429.html
  nevertheless cups-autoconfig is still supported too
  (see Novell/Suse Bugzilla bnc#526657).
- 2.18.19

-------------------------------------------------------------------
Tue Jul 28 12:14:43 CEST 2009 - jsmeix@suse.de

- Be prepared for CUPS 1.4:
  * Since CUPS 1.4 'lpstat -r' results true even when scheduler
  is not running. Therefore we must now grep in its output for
  'scheduler is running' (see Novell/Suse Bugzilla bnc#520599).
  * Since CUPS 1.4 there is no longer a readymade PostScript
  testpage in CUPS. Therefore a slightly modified CUPS 1.3.10
  testprint.ps was added as /usr/share/YaST2/data/testprint.ps
  (see Novell/Suse Bugzilla bnc#520617).
  * Since CUPS 1.4 there are several seconds delay until cupsd
  writes confug files like printers.conf which requires the
  new function Printerlib::WaitForUpdatedConfigFiles
  (see Novell/Suse Bugzilla bnc#520612).
  * At least in CUPS 1.4.rc1 a 'sleep 1' workaround is required
  to ensure that 'lpoptions -l' reports correct defaults
  (see Novell/Suse Bugzilla bnc#520642 and
   CUPS STR #3264 http://www.cups.org/str.php?L3264).
- 2.18.18

-------------------------------------------------------------------
Wed Jul  8 12:23:59 CEST 2009 - ug@suse.de

- redone RNC file

-------------------------------------------------------------------
Tue Jun  2 16:35:57 CEST 2009 - jsmeix@suse.de

- Adapted the Connection Wizard and its help text regarding beh
  for the new foomatic-filters 4.0.1 which now contains beh
  so that cups-backends is no longer required to set up beh
  (see Novell/Suse Bugzilla bnc#502656 comment #15).
- Fixed the determine_printer_driver_options tool which
  failed to set PPD options with special characters in keywords
  (see Novell/Suse Bugzilla bnc#503774).
- Let the autodetect_print_queues tool ignore "root"-instances
  (see Novell/Suse Bugzilla bnc#503065).
- 2.18.17

-------------------------------------------------------------------
Tue May 19 15:39:34 CEST 2009 - mzugec@suse.cz

- fixed: creating AY profile (bnc#504762)
- 2.18.16

-------------------------------------------------------------------
Thu Apr 30 15:07:49 CEST 2009 - jsmeix@suse.de

- In the Print via Network dialog changed ambiguous wording
  "receive" to "accept" to make it more clear that this
  setting is not about actively polling via BrowsePoll
  but regarding passively accepting via BrowseAllow
  (see Novell/Suse Bugzilla bnc#433047 comment #10).
- 2.18.15

-------------------------------------------------------------------
Fri Apr 24 10:42:09 CEST 2009 - jsmeix@suse.de

- Fixed the Connection Wizard which now checks for each connection
  which is not natively supported by CUPS if the RPM package
  which provides the matching CUPS backend is installed.
- 2.18.14

-------------------------------------------------------------------
Thu Apr 23 13:24:07 CEST 2009 - jsmeix@suse.de

- When printing a testpage in the Overview dialog, explicitely
  show the pending print jobs so that the user can now better
  decide whether or not the pending jobs could be deleted.
- Fixed serial printer setup in the Connection Wizard
  (see Novell/Suse Bugzilla bnc#488655) and
  fixed SCSI printer setup in the Connection Wizard accordingly.
- Makeshift fix of the bluetooth setup in the Connection Wizard
  so that manual bluetooth printer setup is possible now
  (see Novell/Suse Bugzilla bnc#467220 comment #11).
- Removed all stuff regarding "infra" from the Connection Wizard
  because we do not and did not provide a CUPS backend for
  infrared access (IrDA) which does not mean that such a setup
  is impossible because any special case can be set up
  via "Specify Arbitrary Device URI".
- 2.18.13

-------------------------------------------------------------------
Thu Apr 16 17:00:12 CEST 2009 - jsmeix@suse.de

- Undo using "-o document-format=application/vnd.cups-postscript"
  when submitting the test page because it does not work for
  the Gutenprint driver (see Novell/Suse Bugzilla bnc#467877).
- 2.18.12

-------------------------------------------------------------------
Thu Apr 16 14:35:59 CEST 2009 - jsmeix@suse.de

- Removed the "filters" package from the "Add Driver" dialog
  because this package was dropped for openSUSE 11.2.
- Be prepared for the upcomming PDF workflow by submitting the test
  page using "-o document-format=application/vnd.cups-postscript"
  (see Novell/Suse Bugzilla bnc#467877).
- 2.18.11

-------------------------------------------------------------------
Thu Apr  2 17:04:10 CEST 2009 - jsmeix@suse.de

- Improved the driver search functionality in basicadd.ycp and
  in basicmodify.ycp (in particular each sequence of spaces
  in the search string is replaced by the regexp '.*' so that
  the search string "ACME 100" would find "ACME FunPrinter 100").
- 2.18.10

-------------------------------------------------------------------
Tue Mar  3 14:55:40 CET 2009 - jsmeix@suse.de

- Fixed a few bugs in the "More Drivers" functionality.
  In particular it works now always based on the current visible
  search string and no longer on whatever obsure other stuff.
- The DriverItems function in Printer.ycp searches the model name
  now also in the 1284DeviceID entry in the PPDs because this entry
  should contain the exact model name how it is autodetected
  while the NickName entry (which is still searched) may contain
  a different model name (e.g. what is labeled on the device).
- 2.18.9

-------------------------------------------------------------------
Fri Feb 27 15:35:16 CET 2009 - jsmeix@suse.de

- Added the functionality to basicadd.ycp and basicmodify.ycp to
  set the default paper size directly when a driver is assigned
  or when the currently used driver is replaced by another one.
- 2.18.8

-------------------------------------------------------------------
Thu Feb 26 14:49:04 CET 2009 - jsmeix@suse.de

- Fixed the "More Drivers" functionality in basicmodify.ycp
  to show the current driver topmost in any case.
- Enhanced help texts for basicadd.ycp and basicmodify.ycp
  to describe driver related issues in much more detail.
- Call Wizard::SetContents with empty content in basicadd.ycp
  and basicmodify.ycp to avoid that initially the previous
  dialog is shown until the real content is generated.
- 2.18.7

-------------------------------------------------------------------
Wed Feb 25 16:19:45 CET 2009 - jsmeix@suse.de

- Added a "More Drivers" functionality to basicadd.ycp and
  basicmodify.ycp (see Novell/Suse Bugzilla bnc#468046).
- Fixed the test whether there is a valid driver and a valid
  connection before a queue is set up in printer_proposal.ycp.
- 2.18.6

-------------------------------------------------------------------
Tue Feb 17 12:34:16 CET 2009 - jsmeix@suse.de

- Removed Firewall Settings which were added in version 2.17.29
  because it is not possible to implement it so that it works
  reliable and correct (see Novell/Suse Bugzilla bnc#468426).
  In particular it is not possible to test on the local host
  if remote access via port 631 TCP/UDP would be allowed
  (there is no replacement for "ipchains --check").
  Added notification texts regarding firewall in the dialogs
  and added explanatory help texts regarding firewall so that
  users are informed what to do manually regarding firewall.
- 2.18.5

-------------------------------------------------------------------
Wed Feb 11 12:27:55 CET 2009 - jsmeix@suse.de

- Fixed various typos in various texts (see Novell/Suse Bugzilla
  bnc#440839 bnc#442537 bnc#465401 bnc#465720 bnc#466371).
- 2.18.4

-------------------------------------------------------------------
Tue Feb 10 15:01:34 CET 2009 - mzugec@suse.cz

- enable cups autoconfig on 64-bit (bnc#464683)
- 2.18.3

-------------------------------------------------------------------
Mon Feb  9 17:58:31 CET 2009 - mzugec@suse.cz

- AutoYaST : import
- 2.18.2

-------------------------------------------------------------------
Fri Feb  6 15:48:53 CET 2009 - mzugec@suse.cz

- AutoYaST support (bnc#464364) - export only
- 2.18.1

-------------------------------------------------------------------
Mon Jan 26 16:59:45 CET 2009 - mzugec@suse.cz

- marked string for translation (bnc#459414) 
- 2.18.0

-------------------------------------------------------------------
Fri Dec  5 12:08:22 CET 2008 - jsmeix@suse.de

- Marked file browser header for translation in driveradd.ycp
  (see Novell/Suse Bugzilla bnc#448589).
- Made all manufacturers_combo_box ComboBox widgets editable
  in connectionwizard.ycp so that the user can manually
  enter his printer manufacturer if it is not present
  in the known_manufacturers list (also useful to append
  some model name info to the manufacturer to get initially
  a more specific driver search result).
- 2.17.52

-------------------------------------------------------------------
Thu Dec  4 16:59:48 CET 2008 - jsmeix@suse.de

- Fixed bugs which were introduced by the change on Wed Dec 3 2008.
  and align buttons according to the change on Wed Dec 3 2008
  not only in basicadd.ycp but also in basicmodify.ycp
  (see Novell/Suse Bugzilla bnc#447515).
- Have a meaningful desciptive label "Search for Drivers"
  in basicadd.ycp and basicmodify.ycp
  (see Novell/Suse Bugzilla bnc#446186).
- 2.17.51

-------------------------------------------------------------------
Thu Dec  4 16:34:29 CET 2008 - mzugec@suse.cz

- align buttons (bnc#447517)

-------------------------------------------------------------------
Thu Dec  4 15:58:29 CET 2008 - mzugec@suse.cz

- align buttons (bnc#447516)

-------------------------------------------------------------------
Thu Dec  4 11:56:07 CET 2008 - mzugec@suse.cz

- text in installation proposal (bnc#449107)
- 2.17.50

-------------------------------------------------------------------
Wed Dec  3 18:02:10 CET 2008 - mzugec@suse.cz

- align buttons (bnc#447515)
- 2.17.49

-------------------------------------------------------------------
Mon Dec  1 09:24:26 CET 2008 - mzugec@suse.cz

- marked string for translation (bnc#446121)

-------------------------------------------------------------------
Fri Nov 28 12:37:23 CET 2008 - jsmeix@suse.de

- Removed the nasty inline bash scripts in connectionwizard.ycp
  and replaced them by our well known external tools from
  the old yast2-printer module test_device, test_remote_socket,
  test_remote_lpd, test_remote_ipp, test_remote_smb, and
  test_remote_novell and called them in a safe environment
  via Printerlib::ExecuteBashCommand (in particular using a safe
  locale which is required for the scripts to work correctly)
  so that now the connection tests in the Connection Wizard should
  again work as good as before in the old yast2-printer module
  and provided an error popup with details when a test fails
  (see Novell/Suse Bugzilla bnc#445543).
- 2.17.48

-------------------------------------------------------------------
Thu Nov 27 14:05:38 CET 2008 - jsmeix@suse.de

- Several fixes regarding the Connection Wizard like
  misaligned layout, wrong Device URIs,
  Buttons without any functionality,
  wrong error and debug messages,
  inaccurate search string for drivers,
  improper preset URIs and model info,...
  so that the Connection Wizard should now basically work
  (see Novell/Suse Bugzilla bnc#440903
   and Novell/Suse Bugzilla bnc#442247  
   and Novell/Suse Bugzilla bnc#446432
   and Novell/Suse Bugzilla bnc#441416).
- 2.17.47

-------------------------------------------------------------------
Wed Nov 26 16:20:09 CET 2008 - jsmeix@suse.de

- Several fixes for the Connection Wizard but it is still
  not very good (see Novell/Suse Bugzilla bnc#440903
  and Novell/Suse Bugzilla bnc#442247
  and Novell/Suse Bugzilla bnc#446432).
- Better fallback when no model info is available
  in basicadd.ycp and basicmodify.ycp
  (see Novell/Suse Bugzilla bnc#446432).
  - Fixed automatic removal of cups-autoconfig RPM when Autoconfig
  dialog is useless (e.g. because of "client only").
- 2.17.46

-------------------------------------------------------------------
Fri Nov 21 17:43:50 CET 2008 - mzugec@suse.cz

- lpr/lpd setup (bnc#420922)
- lookup for printers
- test remote access
- 2.17.45

-------------------------------------------------------------------
Fri Nov 21 09:43:00 CET 2008 - jsmeix@suse.de

- Avoid that the hardware proposal asks the user to install
  the packages cups-client and cups and skip the hardware
  proposal if one of those packages is missing
  (see Novell/Suse Bugzilla bnc#445719)
  but make sure that when the full printer module is launched
  from the hardware proposal it asks the user to install
  the packages cups-client and cups.
- 2.17.44

-------------------------------------------------------------------
Thu Nov 20 15:31:20 CET 2008 - jsmeix@suse.de

- Fixed how to avoid to autoconfigure multiple queues for
  the same printer. It is now based upon the URI which is
  sufficient because "usb://HP/" versus "hp:/usb/" duplicates
  and "parallel:/" versus "hp:/par/" duplicates are already
  avioded via the ConnectionItems("BasicAddDialog") call.
  Moved cupsd start when continuing a fresh installation
  in the target system (i.e. for the hardware proposal) from
  the Read() function in Printer.ycp to printer_proposal.ycp
  and wait for a started cupsd to become actually accessible
  (see Novell/Suse Bugzilla bnc#437735 starting at comment #17).
- Added killing of the CUPS backend process to testpage printing
  to have an emergency break when a wrong driver lets the printer
  spit out zillions of sheets with nonsense characters.
- 2.17.43

-------------------------------------------------------------------
Wed Nov 19 16:35:13 CET 2008 - jsmeix@suse.de

- Avoid to autoconfigure multiple queues for the same printer
  if the printer is accessible via multiple connections
  (see Novell/Suse Bugzilla bnc#437735 starting at comment #14).
- Fixed testpage printing again, made it more fail safe.
- 2.17.42

-------------------------------------------------------------------
Fri Nov 14 15:55:55 CET 2008 - mzugec@suse.cz

- autoconfigure local printers during installation (bnc#437735)
- 2.17.41

-------------------------------------------------------------------
Fri Nov 14 11:27:48 CET 2008 - jsmeix@suse.de

- Fixed "client-only" handling in the dialogs of the DialogTree
  (Printing via Network, Sharing, Policies, Autoconfig).
- Fixed testpage printing commands (added "-h localhost").
- 2.17.40

-------------------------------------------------------------------
Thu Nov 13 18:21:42 CET 2008 - jsmeix@suse.de

- Fixed testpage printing, made it more fail safe.
- 2.17.39

-------------------------------------------------------------------
Thu Nov 13 14:27:52 CET 2008 - jsmeix@suse.de

- Fixed removal of the "Cancel" button from the Overview dialog
  so that also in ncurses mode the other dialogs in the DialogTree
  get the button with the "cancel" functionality re-enabled.
- Avoid unexpected side-effects of Package::Remove.
- Fixed "Trigger Automatic Configuration" in Autoconfig dialog
  by enabling the automatic configuration if the trigger is "on".
- 2.17.38

-------------------------------------------------------------------
Thu Nov 13 11:27:13 CET 2008 - jsmeix@suse.de

- In Sharing dialog fixed removing all BrowseAddress values
  and made it more user-friendly to change from
  "deny any remote access" to "allow remote access".
- Added "Trigger Automatic Configuration" to Autoconfig dialog.
- Removed the "Cancel" button from the Overview dialog
  because there is nothing to cancel here.
- Implemented the fixed functionality of the "Cancel" button
  in the non-initial dialogs of the DialogTree correctly
  (see below Wed Nov 12 12:52:57 CET 2008).
- 2.17.37

-------------------------------------------------------------------
Wed Nov 12 14:55:36 CET 2008 - jsmeix@suse.de

- Remove the queue if it was only partially added and removed
  duplicate error messages when adding or deleting a queue.
- Enforced a consistent meaning of the "OK" button
  (see Novell/Suse Bugzilla bnc#443676).
- 2.17.36

-------------------------------------------------------------------
Wed Nov 12 12:52:57 CET 2008 - jsmeix@suse.de

- Added captions and the printer icon to the dialog header line
  (see Novell/Suse Bugzilla bnc#438198).
- Fixed functionality of the "Cancel" button in the non-initial
  dialogs of the DialogTree (Printing via Network, Sharing,
  Policies, Autoconfig) so that the "Cancel" button goes
  now "back" to the Overview according to the new style guide.
  Only the "Cancel" button in the initial Overview dialog
  exits the whole module.
- 2.17.35

-------------------------------------------------------------------
Thu Nov  6 17:36:12 CET 2008 - jsmeix@suse.de

- Fixed a quoting bug in the Modify queue dialog.
- Renamed buttons according to the new style guide
  by manually overwriting the Wizard module defaults
  (compare Novell/Suse Bugzilla bnc#440560).
- 2.17.34

-------------------------------------------------------------------
Thu Nov  6 12:17:35 CET 2008 - jsmeix@suse.de

- Fixed driver preselection bug in Printer.ycp.
- Fixed dialog layout of the Add New Printer Configuration
  dialog and of the Modify queue dialog so that
  both dialogs work also o.k. in ncurses mode.
  This mitigates also the issue in
  Novell/Suse Bugzilla bnc#438875.
- 2.17.33

-------------------------------------------------------------------
Wed Nov  5 11:30:40 CET 2008 - jsmeix@suse.de

- Fixed bugs in the Share Printers dialog:
  Apply settings when the user only changed
  "deny remote access" to "allow remote access"
  if there is at least one real allow value.
  Having only "Listen *:631" in cupsd.conf is sufficient
  that the initSharing function sets listen_local to true.
  The modify_cupsd_conf tool works with 'Allow 127.0.0.2'
  and it logs its changes as comments in cupsd.conf.
  (See Novell/Suse Bugzilla bnc#441370)
- Fixed dialog layout of the Share Printers dialog
  and of the Printing via Network dialog so that
  both dialogs work also o.k. in ncurses mode.
- 2.17.32

-------------------------------------------------------------------
Tue Nov  4 13:30:59 CET 2008 - jsmeix@suse.de

- Dialog layout fixes for the Share Printers dialog
  (see Novell/Suse Bugzilla bnc#438225).
- Removed the "Nothing changed" Popup everywhere
  (see Novell/Suse Bugzilla bnc#440605).
- 2.17.31

-------------------------------------------------------------------
Fri Oct 31 14:51:29 CET 2008 - jsmeix@suse.de

- Added a test if a local cupsd does not listen on the
  official IPP port (631) to the Overview dialog.
- 2.17.30

-------------------------------------------------------------------
Thu Oct 30 15:10:48 CET 2008 - jsmeix@suse.de

- Added Firewall Settings to the Printing via Network dialog.
- Added Firewall Settings to the Share Printers dialog.
- 2.17.29

-------------------------------------------------------------------
Wed Oct 29 15:56:32 CET 2008 - jsmeix@suse.de

- Added a AskForExistingFile popup dialog in the Add Driver
  dialog to browse the file system to select a PPD file.
- Added functionality to remove the cups-autoconfig RPM
  in the Autoconfig Settings dialog.
- 2.17.28

-------------------------------------------------------------------
Fri Oct 24 12:03:52 CEST 2008 - jsmeix@suse.de

- Fixed some bugs in the Add Driver dialog.
  In particular regarding the HPLIP packages
  (hplip + hplip-hpijs versus hpijs-standalone).
  Added driver package ghostscript-omni.
- 2.17.27

-------------------------------------------------------------------
Thu Oct 23 17:26:41 CEST 2008 - jsmeix@suse.de

- The Add Driver dialog should now work basically.
- 2.17.26

-------------------------------------------------------------------
Thu Oct 23 10:46:15 CEST 2008 - jsmeix@suse.de

- In the Policies dialog added checkboxes to apply the policies
  to all local queues because the ErrorPolicy and OpPolicy
  settings in /etc/cups/printers.conf do of course not change
  automatically when the default policies are changed in
  /etc/cups/cupsd.conf (unfortunately each queue is set up
  with explicite ErrorPolicy and OpPolicy settings instead
  of inherit them from cupsd.conf if not set in printers.conf).
- In the Policies dialog added tests whether or not the
  dialog is useless (e.g. in case of a "client-only" config)
  and disable the widgets if the dialog is useless.
- 2.17.25

-------------------------------------------------------------------
Wed Oct 22 15:45:21 CEST 2008 - jsmeix@suse.de

- Removed cups*.scr entry from the files list in the spec file
  because the IniAgent is no longer used.
- 2.17.24

-------------------------------------------------------------------
Wed Oct 22 15:08:41 CEST 2008 - jsmeix@suse.de

- The Autoconfig Settings dialog should work now basically.
  Separated this dialog as autoconfig.ycp from dialogs.ycp.
  Replaced usage of the IniAgent (found several bugs there)
  by simple commands (removed whole the agents sub-directory).
- Removed Printerlib::Read and Printerlib::Write which are
  no longer needed (the dialogs read their stuff directly).
- 2.17.23

-------------------------------------------------------------------
Mon Oct 20 10:42:02 CEST 2008 - mzugec@suse.cz

- fixed popup typo (bnc#436097)

-------------------------------------------------------------------
Thu Oct 16 12:12:23 CEST 2008 - jsrain@suse.cz

- fixed printer proposal (bnc #431559)
- 2.17.22

-------------------------------------------------------------------
Mon Oct 13 17:01:55 CEST 2008 - mzugec@suse.cz

- fixed Connection Wizard
- some help text improvements
- 2.17.21

-------------------------------------------------------------------
Mon Oct 13 10:19:40 CEST 2008 - jsmeix@suse.de

- The CUPS Policies dialog should work now.
- Fixed a bug regarding "Share Printers" so that it reports now
  the Allow values only from the root location (<Location />).
- 2.17.20

-------------------------------------------------------------------
Thu Oct  9 12:26:11 CEST 2008 - jsmeix@suse.de

- Check if the cups-client RPM is installed (strictly required)
  and enforce to install it (otherwise abort) and
  if the cups RPM is installed (not strictly required)
  and try to install it but let the user proceed otherwise.
- Prefer 'hp:/usb/' DeviceURIs by default.
  The matching 'usb://HP/' is still available
  via "More Connections".
- Using separated progress file for create_printer_ppd_database
  to show a progress even while waiting up to 300 seconds
  for a response from the lpinfo command
  (see Novell/Suse Bugzilla bnc#429397).
- 2.17.19

-------------------------------------------------------------------
Wed Oct  8 12:10:46 CEST 2008 - jsmeix@suse.de

- The "Share Printers" dialog should now work
- Increased MAXIMUM_WAIT to 300 seconds in
  tools/create_printer_ppd_database
  (see Novell/Suse Bugzilla bnc#429397).
- 2.17.18

-------------------------------------------------------------------
Fri Sep 26 12:34:22 CEST 2008 - jsmeix@suse.de

- In the "Share Printers" dialog it is now no longer possible
  to "Add" the same network interface several times
  (even with different settings for "publishing").
- Using Popup::ErrorDetails wherever possible to provide
  the actual system stderr message via [Details]
  (see Novell/Suse Bugzilla bnc#429397).
- 2.17.17

-------------------------------------------------------------------
Thu Sep 25 17:48:21 CEST 2008 - jsmeix@suse.de

- First usable version of the "Share Printers" dialog.
  Curently it is not yet implemented to share via
  individual IP addresses.
- Increased MAXIMUM_WAIT to 60 seconds in
  tools/create_printer_ppd_database
  (see Novell/Suse Bugzilla bnc#429397).
- 2.17.16

-------------------------------------------------------------------
Fri Sep 19 14:05:16 CEST 2008 - mzugec@suse.de

- start cups during installation proposal (bnc#418585)
- 2.17.15

-------------------------------------------------------------------
Fri Sep 19 11:07:40 CEST 2008 - mzugec@suse.cz

- some fixes for translations

-------------------------------------------------------------------
Thu Sep 18 17:15:50 CEST 2008 - mzugec@suse.cz

- improved help (by jsmeix)
- Connection Wizard (not done)
- 2.17.14

-------------------------------------------------------------------
Mon Sep 15 13:05:43 CEST 2008 - mzugec@suse.cz

- fixed button labeling (bnc#398487)

-------------------------------------------------------------------
Fri Sep 12 13:07:36 CEST 2008 - jsmeix@suse.de

- Adapt the "Modify Printer" dialog to the design on
  http://en.opensuse.org/YaST/Development/Printer_Enhancement
  but still a single dialog only with basic functionality
  (the full featured tabbed dialog is not yet implemented).
- Show a user information because the Connection Wizard
  provides currently only minimalist functionality.
- Fix texts in the dialogs (e.g. avoid the word "queue").
  The help texts still need to be fixed.
- 2.17.13

-------------------------------------------------------------------
Thu Sep 11 15:17:42 CEST 2008 - jsmeix@suse.de

- Adapt the "Add Printer" dialog to the design on
  http://en.opensuse.org/YaST/Development/Printer_Enhancement
- 2.17.12

-------------------------------------------------------------------
Fri Sep  5 16:05:30 CEST 2008 - jsmeix@suse.de

- Fixed bugs regarding client-only setup via a mandatory
  and better test if a client-only server is accessible.
- 2.17.11

-------------------------------------------------------------------
Thu Sep  4 18:20:06 CEST 2008 - jsmeix@suse.de

- The 'Printing via Network' dialog should now work.
- Added user confirmation before a cupsd start/restart/stop.
- Implemented [Refresh] button for the 'Overview' dialog.
- 2.17.10

-------------------------------------------------------------------
Wed Sep  3 17:05:45 CEST 2008 - jsmeix@suse.de

- Implemented cupsd status/start/restart/stop functionality.
- 2.17.9

-------------------------------------------------------------------
Tue Sep  2 16:31:57 CEST 2008 - jsmeix@suse.de

- The 'Printing via Network' dialog writes the Browsing values
  to the system (but client-only is not yet implemented).
- 2.17.8

-------------------------------------------------------------------
Fri Aug 29 14:45:28 CEST 2008 - jsmeix@suse.de

- Some code cleanup.
- 2.17.7

-------------------------------------------------------------------
Thu Aug 28 18:19:32 CEST 2008 - jsmeix@suse.de

- Fixed build (new scripts were not packaged).
- The 'Printing via Network' dialog UI should now work correctly
  but writing the values to the system is not yet implemented.
- 2.17.6

-------------------------------------------------------------------
Wed Aug 27 16:22:28 CEST 2008 - jsmeix@suse.de

- Enhanced scripts in the tools directory to make them
  safe for a client-only setup and two new scripts
  cups_client_only and modify_cupsd_conf.
- 2.17.5

-------------------------------------------------------------------
Thu Aug 14 14:11:22 CEST 2008 - mzugec@suse.cz

- allow to print test page also for remote queues
- changed next Button to Finish
- 2.17.4

-------------------------------------------------------------------
Thu Aug 14 07:48:48 CEST 2008 - mzugec@suse.cz

- widget to select default policy (fate#303515)
- 2.17.3

-------------------------------------------------------------------
Tue Aug 12 10:31:20 CEST 2008 - mzugec@suse.cz

- removed cups-devel from Requires

-------------------------------------------------------------------
Mon Aug 11 14:11:31 CEST 2008 - mzugec@suse.cz

- major code changes based on Johannes Meixner's code
- 2.17.2

-------------------------------------------------------------------
Wed Jun 11 14:00:41 CEST 2008 - mzugec@suse.de

- "change connection" - backend validation (bnc#388575)
- 2.17.1

-------------------------------------------------------------------
Tue Jun 10 13:51:27 CEST 2008 - mzugec@suse.cz

- automatic installation / not-fully supported printers (bnc#395397)
- 2.17.0

-------------------------------------------------------------------
Wed Jun  4 14:07:42 CEST 2008 - mzugec@suse.cz

- improved hostname validation
- 2.16.34

-------------------------------------------------------------------
Wed Jun  4 13:23:24 CEST 2008 - mzugec@suse.cz

- initialization sequence sent to usb blocks usb port (bnc#397036)
- 2.16.33

-------------------------------------------------------------------
Mon Jun  2 11:22:52 CEST 2008 - mzugec@suse.cz

- install hplip only in case any "hp:/" configured queue exists 
(bnc#395386)
- 2.16.32

-------------------------------------------------------------------
Thu May 22 13:17:27 CEST 2008 - mzugec@suse.cz

- install and use hplip instead of hpijs-standalone (bnc#388149)
- 2.16.31

-------------------------------------------------------------------
Tue May 20 23:48:20 CEST 2008 - mzugec@suse.cz

- improved add/edit usb queues
- 2.16.30

-------------------------------------------------------------------
Tue May 20 17:53:55 CEST 2008 - mzugec@suse.cz

- fixed lpd network queue (bnc#391848)
- 2.16.29

-------------------------------------------------------------------
Tue May 20 16:00:51 CEST 2008 - mzugec@suse.cz

- use cups backend for detect parallel (bnc#391324)
- 2.16.28

-------------------------------------------------------------------
Sun May 18 12:03:13 CEST 2008 - mzugec@suse.cz

- marked strings for translation (bnc#390588)

-------------------------------------------------------------------
Sun May 18 11:16:14 CEST 2008 - mzugec@suse.cz

- fixed - adding smb queue (bnc#386934)
- 2.16.27

-------------------------------------------------------------------
Fri May 16 16:40:22 CEST 2008 - jsrain@suse.cz

- added categories Settings and System into desktop file
  (bnc #382778)

-------------------------------------------------------------------
Wed May 14 10:40:27 CEST 2008 - mzugec@suse.cz

- fixed broken workflow in "Change Connection" (bnc#388575)
- 2.16.26

-------------------------------------------------------------------
Sat May 10 23:35:42 CEST 2008 - mzugec@suse.de

- too small text boxes at "Global Settings" (bnc#387234)
- 2.16.25

-------------------------------------------------------------------
Sat May 10 23:08:50 CEST 2008 - mzugec@suse.de

- disable "Test Printer Connection" when no connection (bnc#386592)
- 2.16.24

-------------------------------------------------------------------
Wed May  7 12:50:54 CEST 2008 - mzugec@suse.de

- stop/start cupsd according client/server mode (bnc#387249)
- 2.16.23

-------------------------------------------------------------------
Tue May  6 20:06:02 CEST 2008 - mzugec@suse.cz

- set window size by MinSize() (bnc#386940)
- 2.16.22

-------------------------------------------------------------------
Fri May  2 14:49:31 CEST 2008 - mzugec@suse.cz

- change printer model window size (bnc#385944)
- 2.16.21

-------------------------------------------------------------------
Fri May  2 13:18:14 CEST 2008 - mzugec@suse.cz

- install bluez-cups when needed (bnc#374423)
- 2.16.20

-------------------------------------------------------------------
Fri Apr 25 17:28:12 CEST 2008 - mzugec@suse.cz

- fixed overview layout - adapt to DialogTree (FaTE#302133)
- 2.16.19

-------------------------------------------------------------------
Thu Apr 24 15:41:20 CEST 2008 - mzugec@suse.cz

- updated data/printers_support (bnc#378233)
- 2.16.18

-------------------------------------------------------------------
Wed Apr 23 14:50:59 CEST 2008 - mzugec@suse.cz

- fixed "add" printer (bnc#382074)
- 2.16.17

-------------------------------------------------------------------
Wed Apr 23 10:42:22 CEST 2008 - mzugec@suse.cz

- improved "global" settings layout (bnc#381353)
- 2.16.16

-------------------------------------------------------------------
Thu Apr 17 01:44:03 CEST 2008 - mzugec@suse.de

- fixed testsuite

-------------------------------------------------------------------
Wed Apr 16 19:57:42 CEST 2008 - mzugec@suse.cz

- Avoid the Automated Setup For "Non-Recommended" Printers
  (FaTE#120083)
- 2.16.15

-------------------------------------------------------------------
Tue Apr 15 08:26:46 CEST 2008 - jsuchome@suse.cz

- yast2-inetd required, fixed testsuite
- 2.16.14

-------------------------------------------------------------------
Mon Apr 14 19:26:43 CEST 2008 - mzugec@suse.cz

- UI Redesign (FaTE#302133)
- 2.16.13

-------------------------------------------------------------------
Sun Apr 13 12:30:50 CEST 2008 - coolo@suse.de

- fix linking too

-------------------------------------------------------------------
Sat Apr 12 07:28:13 CEST 2008 - coolo@suse.de

- adding md5_stream implementation 
- 2.16.12

-------------------------------------------------------------------
Mon Apr  7 20:53:53 CEST 2008 - mzugec@suse.de

- LPD protocol switching support (bnc#120086)
- 2.16.11

-------------------------------------------------------------------
Tue Apr  1 05:18:38 CEST 2008 - mzugec@suse.de

- fixed list of remote/local backends

-------------------------------------------------------------------
Fri Mar 28 22:19:11 CET 2008 - mzugec@suse.de

- ComboBox to switch between Local and Remote printers (FaTE#302133)
- Print test page in overview dialog
- 2.16.10

-------------------------------------------------------------------
Mon Mar 17 12:43:32 CET 2008 - jsrain@suse.cz

- added 'StartupNotify=true' to the desktop file (bnc #304964)

-------------------------------------------------------------------
Mon Mar 10 18:58:44 CET 2008 - mzugec@suse.de

- adapt parport agent to new cut (bnc#359893)
- 2.16.9

-------------------------------------------------------------------
Fri Feb 29 13:31:04 CET 2008 - coolo@suse.de

- fix spec file

-------------------------------------------------------------------
Tue Feb 26 17:56:01 CET 2008 - mzugec@suse.de

- automatic refresh of selection list box (bnc#363423)

- 2.16.8

-------------------------------------------------------------------
Mon Jan 28 14:23:51 CET 2008 - mzugec@suse.de

- dropped strict requires to netcat (#264309)
- 2.16.7

-------------------------------------------------------------------
Mon Nov 26 15:28:07 CET 2007 - mzugec@suse.cz

- accepting password with "@" in it (#225240)
- 2.15.6

-------------------------------------------------------------------
Fri Nov 23 16:29:25 CET 2007 - mzugec@suse.cz

- use URL instead of Printerlib:: functions

-------------------------------------------------------------------
Wed Nov 21 18:15:08 CET 2007 - mzugec@suse.cz

- add title for Update yast printer db (#303975)

-------------------------------------------------------------------
Wed Nov 21 11:43:26 CET 2007 - mzugec@suse.cz

- disable printer test button for local filtering (#186597)
- removed *.la files (#223709)
- 2.16.5

-------------------------------------------------------------------
Tue Nov  6 16:44:36 CET 2007 - mzugec@suse.cz

- tabbed UI done (without help)
- 2.16.4

-------------------------------------------------------------------
Fri Nov  2 12:54:13 CET 2007 - mzugec@suse.cz

- show network printers - fixed (problem when password contains 
  space for smb backend)(#332237)
- disable edit for raw queues (#247336)
- split UI into tabs (not done completly)
- 2.16.3

-------------------------------------------------------------------
Tue Oct 30 15:55:17 CET 2007 - mzugec@suse.cz

- let the user accept even non-compliant PPDs - (#310177)
- 2.16.2

-------------------------------------------------------------------
Mon Oct 29 12:35:30 CET 2007 - mzugec@suse.cz

- "unknown" queue appears in the installation - (#308107)
- use [Accept] instead of [Finish] during installation - (#308102)
- 2.16.1

-------------------------------------------------------------------
Wed Oct  3 10:08:42 CEST 2007 - mvidner@suse.cz

- Do not try to package COPYRIGHT.english, it is gone from
  devtools (#299144).
- 2.16.0

-------------------------------------------------------------------
Mon Sep 24 09:00:43 CEST 2007 - mzugec@suse.cz

- reverted last submit (back to 2.15.4 status) (#326319)

-------------------------------------------------------------------
Mon Sep  3 17:31:11 CEST 2007 - mzugec@suse.cz

- changed testsuite output

-------------------------------------------------------------------
Mon Sep  3 16:47:22 CEST 2007 - mzugec@suse.cz

- read URI for usb printers from cups backend if not available 
in hwinfo (#307118)
- 2.15.5

-------------------------------------------------------------------
Mon Aug  6 10:00:35 CEST 2007 - mzugec@suse.cz

- reverted factory patch (remove tabs)
- 2.15.4

-------------------------------------------------------------------
Thu Jul 26 10:37:55 CEST 2007 - mzugec@suse.cz

- package splitted into yast2-printer and yast2-printer-devel-doc
- 2.15.3

-------------------------------------------------------------------
Mon Jul 23 16:21:23 CEST 2007 - mzugec@suse.de

- rename buttons - [Finish] should be [Accept] (#270515)
- 2.15.2

-------------------------------------------------------------------
Fri May 25 13:30:04 CEST 2007 - jsrain@suse.cz

- removed outdated translations from .desktop-files (#271209)

-------------------------------------------------------------------
Mon May  7 13:04:18 CEST 2007 - mzugec@suse.cz

- include cups-drivers if needed (#218760)
- 2.15.1

-------------------------------------------------------------------
Wed May  2 15:31:37 CEST 2007 - mzugec@suse.cz

- superfluous slash in the printer list (#215197)

-------------------------------------------------------------------
Wed May  2 13:51:09 CEST 2007 - mzugec@suse.cz

- disappearing of capital letters in queue name (#269188)
- 2.15.0

-------------------------------------------------------------------
Tue Apr  3 14:49:15 CEST 2007 - mzugec@suse.cz

- L3: autoyast fails on printer configuration (#258738)
- 2.14.23

-------------------------------------------------------------------
Wed Feb 21 15:35:28 CET 2007 - mzugec@suse.cz

- allow "localhost" and "127.0.0.1" as servername (#247273)
- 2.14.22

-------------------------------------------------------------------
Mon Feb 19 13:21:07 CET 2007 - mzugec@suse.cz

- start hplip service only for local queues (#237693)
- when "add new queue for existing printer", use DeviceUri for identifying printer (#242085)
- 2.14.21

-------------------------------------------------------------------
Thu Feb  8 09:22:32 CET 2007 - mzugec@suse.de

- dialog shows default queue even if there was none (#223838)
- 2.14.20

-------------------------------------------------------------------
Tue Feb  6 16:48:56 CET 2007 - mzugec@suse.de

- suggest PPD file for the selected printer (#214243)

-------------------------------------------------------------------
Tue Feb  6 12:49:35 CET 2007 - mzugec@suse.de

- use recommended ppd if there is any (#220712)
- 2.14.19

-------------------------------------------------------------------
Mon Feb  5 18:18:09 CET 2007 - mzugec@suse.de

- smb queues with user/pass are not listed in list of queues (#240727)
- 2.14.18

-------------------------------------------------------------------
Thu Jan  4 18:11:31 CET 2007 - mzugec@suse.cz

- 2.14.17 - #229231 - hangs up when building database of drivers: 4%

-------------------------------------------------------------------
Thu Nov 30 14:20:57 CET 2006 - mzugec@suse.de

- ServerName widget minimal size
- 2.14.16

-------------------------------------------------------------------
Mon Nov 27 18:20:51 CET 2006 - mzugec@suse.cz

- #223840 - stops hplip even if it was running
- 2.14.15

-------------------------------------------------------------------
Thu Nov 23 13:36:16 CET 2006 - mzugec@suse.cz

- #223197 - yast2-printer does not show all queues
- #223206 - yast2-printer determines and sets wrong default queue
- 2.14.14

-------------------------------------------------------------------
Tue Nov 21 09:32:00 CET 2006 - mzugec@suse.cz

- #221245 - remote printers are allowed to modify
- 2.14.13

-------------------------------------------------------------------
Mon Nov 13 11:17:31 CET 2006 - mzugec@suse.cz

- #220278 - replace cups-drivers-stp package with gutenprint
- 2.14.12

-------------------------------------------------------------------
Fri Nov 10 10:41:21 CET 2006 - mzugec@suse.cz

- #217259 - printer segfaults - finally fixed
- 2.14.11

-------------------------------------------------------------------
Wed Nov  8 20:10:59 CET 2006 - mzugec@suse.cz

- #217259 - printer segfaults
- 2.14.10

-------------------------------------------------------------------
Wed Nov  8 18:27:20 CET 2006 - mzugec@suse.cz

- #190173 - read settings from CUPS daemon after daemon starts
- 2.14.9

-------------------------------------------------------------------
Tue Nov  7 15:48:31 CET 2006 - mzugec@suse.cz

- fixed src/config/printer.rnc

-------------------------------------------------------------------
Tue Nov  7 15:36:55 CET 2006 - mzugec@suse.cz

- #211564 - align CUPS Permissions dialog
- 2.14.8

-------------------------------------------------------------------
Wed Nov  1 20:00:25 CET 2006 - mzugec@suse.cz

- #210924 - choose correct PPD file
- 2.14.7

-------------------------------------------------------------------
Tue Oct 31 17:31:10 CET 2006 - mzugec@suse.cz

- #215251 - add schema (RNC) file
- 2.14.6

-------------------------------------------------------------------
Tue Oct 31 09:41:47 CET 2006 - mzugec@suse.cz

- fate #301214: Adapt yast2-printer for CUPS 1.2
- 2.14.5

-------------------------------------------------------------------
Tue Oct 24 17:31:12 CEST 2006 - mzugec@suse.cz

- #214265 - module crashes when reading old driver database
- 2.14.4

-------------------------------------------------------------------
Fri Sep  1 17:38:38 CEST 2006 - mzugec@suse.cz

- fate #416 - recognize iPrint

-------------------------------------------------------------------
 Tue Oct 17 10:22:55 CEST 2006 - mzugec@suse.cz

- fixed #206398 - serial printer test fails

-------------------------------------------------------------------
 Mon Oct  9 10:00:14 CEST 2006 - mzugec@suse.cz

- #208005 - resize cups dialog

-------------------------------------------------------------------
Fri Sep  1 17:38:38 CEST 2006 - mzugec@suse.cz

-fixed #116446, #115888, #175323 - hp:// backend
        + testsuite change for CUPS1.2

-------------------------------------------------------------------
Fri Aug 18 09:02:25 CEST 2006 - jsrain@suse.cz

- fixed building documentation
- 2.13.23

-------------------------------------------------------------------
Wed Aug  9 19:05:28 CEST 2006 - mzugec@suse.cz

- fixed #197106 - DeviceUri syntax problem for samba

-------------------------------------------------------------------
Wed Aug  9 14:06:21 CEST 2006 - mzugec@suse.cz

-  fixed #180640 - starts hplip even if it was stoped and disabled

-------------------------------------------------------------------
Wed Aug  9 12:27:24 CEST 2006 - jsrain@suse.cz

- fixed tsetsuite

-------------------------------------------------------------------
Tue Jul 18 18:32:35 CEST 2006 - mzugec@suse.cz

- 2.13.20 fixed #190173 - lpd printer doesn't get installed

-------------------------------------------------------------------
Fri Jun  9 11:22:04 CEST 2006 - mzugec@suse.cz

- fixed #181780 - corrupted URI for smb

-------------------------------------------------------------------
Wed Jun  7 17:53:28 CEST 2006 - visnov@suse.cz

- fix build
- 2.13.18

-------------------------------------------------------------------
Fri Jun  2 18:41:25 CEST 2006 - mzugec@suse.cz

- fixed #169750 - media size not saved properly

-------------------------------------------------------------------
Thu May 11 16:36:17 CEST 2006 - mzugec@suse.cz

- fixed #172856 - wrong encoding

-------------------------------------------------------------------
Thu May 11 10:59:44 CEST 2006 - mzugec@suse.cz

- fixed #169689 and #169684 - read CUPS settings in installation

-------------------------------------------------------------------
Thu May  4 13:25:04 CEST 2006 - mzugec@suse.cz

- merged texts from proofread
- 2.13.14

-------------------------------------------------------------------
Fri Apr 28 13:15:12 CEST 2006 - mzugec@suse.cz

- fixed #169689 -  warning for propose button

-------------------------------------------------------------------
Fri Apr 28 11:09:35 CEST 2006 - mzugec@suse.cz

- fixed #169763 - ignore not used zones

-------------------------------------------------------------------
Wed Apr 26 18:33:26 CEST 2006 - mzugec@suse.cz

- fixed #169750 - media size not saved properly

-------------------------------------------------------------------
Wed Apr 26 16:54:30 CEST 2006 - mzugec@suse.cz

- fixed #169684 - expert cups server setting dialog does not always store data

-------------------------------------------------------------------
Fri Apr 14 18:24:15 CEST 2006 - mzugec@suse.cz

- fixed #164851 - warn if conflict choices in PPD

-------------------------------------------------------------------
Fri Apr 14 09:24:55 CEST 2006 - mzugec@suse.cz

- fixed #88286 - using locales for A4/Letter

-------------------------------------------------------------------
Tue Apr 11 10:17:58 CEST 2006 - mzugec@suse.cz

- fixed #163886 - configuring more printers

-------------------------------------------------------------------
Fri Apr  7 11:09:26 CEST 2006 - mzugec@suse.cz

- #163870 - auto-select printer model

-------------------------------------------------------------------
Thu Mar 30 11:48:45 CEST 2006 - mzugec@suse.cz

- fixed #161050 - new queue for existing printer

-------------------------------------------------------------------
Wed Mar 15 14:48:54 CET 2006 - mzugec@suse.cz

- fixed #157872 - model and ppd information

-------------------------------------------------------------------
Tue Mar 14 19:01:32 CET 2006 - schwab@suse.de

- Fix unaligned buffer for md5_stream [#140341].

-------------------------------------------------------------------
Wed Mar  1 16:58:03 CET 2006 - mzugec@suse.cz

- fixed #153365 - untranslated text from SuSEFirewall

-------------------------------------------------------------------
Mon Feb 27 15:52:46 CET 2006 - mzugec@suse.cz

- fixed #152172 - hide password when using samba

-------------------------------------------------------------------
Wed Jan 18 16:13:57 CET 2006 - mzugec@suse.cz

- fixed #142784 - difficult to disable cups broadcast listening

-------------------------------------------------------------------
Tue Dec 20 12:18:29 CET 2005 - mzugec@suse.cz

- initial SL10.1

-------------------------------------------------------------------
Tue Dec 20 09:05:44 CET 2005 - visnov@suse.cz

- don't link against libpy2stdio

-------------------------------------------------------------------
Thu Dec 15 18:37:49 CET 2005 - mzugec@suse.cz

- delete deprecated lookup

-------------------------------------------------------------------
Thu Dec 15 18:12:38 CET 2005 - mzugec@suse.cz

- change deprecated find to search

-------------------------------------------------------------------
Tue Nov  8 22:15:47 CET 2005 - mzugec@suse.cz

- improving add printer/queue dialogs

-------------------------------------------------------------------
Tue Sep 13 17:05:00 CEST 2005 - mzugec@suse.cz

- fixed (#116744) - remove warning

-------------------------------------------------------------------
Tue Sep 13 16:37:50 CEST 2005 - mzugec@suse.cz

- fixed (#116516) - change sequence for unknown printer

-------------------------------------------------------------------
Mon Sep 12 15:57:53 CEST 2005 - mzugec@suse.cz

- fixed untranslated string

-------------------------------------------------------------------
Mon Sep 12 14:50:16 CEST 2005 - mzugec@suse.cz

- fixed bug #114735

-------------------------------------------------------------------
Mon Sep  5 18:11:15 CEST 2005 - mzugec@suse.cz

- fixed cups-server

-------------------------------------------------------------------
Mon Aug 29 12:19:58 CEST 2005 - mzugec@suse.cz

- fixed bugs (113299, 113297, 106686)

-------------------------------------------------------------------
Wed Aug 24 17:26:23 CEST 2005 - mzugec@suse.cz

- fixed more bugs (WizardHW - add, edit)

-------------------------------------------------------------------
Mon Jul 11 09:04:25 CEST 2005 - visnov@suse.cz

- fixed build dependencies
- 2.12.1

-------------------------------------------------------------------
Fri May 13 14:27:48 CEST 2005 - jsrain@suse.cz

- fixed list of required packages

-------------------------------------------------------------------
Tue May  3 17:50:44 CEST 2005 - jsrain@suse.cz

- renamed variables 'default' and 'switch'
- 2.12.0

-------------------------------------------------------------------
Tue Mar 15 10:41:30 CET 2005 - jsrain@suse.cz

- fixed displaying incorrect label for PPD files (#72792)

-------------------------------------------------------------------
Wed Mar  2 10:25:55 CET 2005 - jsrain@suse.cz

- merged texts from proofread

-------------------------------------------------------------------
Mon Feb 28 16:38:59 CET 2005 - jsrain@suse.cz

- fixed handling of ghostscript packages

-------------------------------------------------------------------
Thu Feb 24 13:38:44 CET 2005 - jsrain@suse.cz

- fixed creating CUPS client-only configuration (#66445)
- 2.11.9

-------------------------------------------------------------------
Wed Feb 23 15:38:04 CET 2005 - jsrain@suse.cz

- fixed some check_ycp errors

-------------------------------------------------------------------
Tue Feb 22 12:59:30 CET 2005 - jsrain@suse.cz

- fixed wildcard for adding PPD files (#66135)
- fixed handling of Samba URIs, not printing password in URI on
  the test page (#64821)
- inform user that setting printer via HPLIP failed
- 2.11.8

-------------------------------------------------------------------
Fri Feb 18 16:08:22 CET 2005 - jsrain@suse.cz

- fixed comments for translators
- 2.11.7

-------------------------------------------------------------------
Thu Feb 17 13:20:05 CET 2005 - jsrain@suse.cz

- inform user about possibility to fix quality problems changing
  the PPD file (#49888)

-------------------------------------------------------------------
Wed Feb  9 16:10:16 CET 2005 - jsrain@suse.cz

- remove indentation from cupsd.conf (#50625)

-------------------------------------------------------------------
Mon Feb  7 16:07:13 CET 2005 - jsrain@suse.cz

- merged texts from proofread
- 2.11.6

-------------------------------------------------------------------
Tue Feb  1 10:03:25 CET 2005 - jsrain@suse.cz

- fixed detection for some printers

-------------------------------------------------------------------
Mon Jan 31 13:28:53 CET 2005 - jsrain@suse.cz

- fixed displaying empty parenthesis in proposal
- 2.11.5

-------------------------------------------------------------------
Tue Jan 25 09:15:28 CET 2005 - jsrain@suse.cz

- syntax fixes
- 2.11.4

-------------------------------------------------------------------
Tue Jan 18 16:35:27 CET 2005 - jsrain@suse.cz

- added HPLIP support
- 2.11.3

-------------------------------------------------------------------
Wed Jan 12 14:35:34 CET 2005 - jsrain@suse.cz

- clean the temporary directory before downloading PPD files
  (#49474)

-------------------------------------------------------------------
Wed Dec 15 15:59:41 CET 2004 - jsrain@suse.cz

- using Progress::set
- adapted to new SuSEFirewall
- cleaned neededforbuild and requires
- fixed handling of IPP queues for non-CUPS servers (##48628)
- 2.11.2

-------------------------------------------------------------------
Mon Dec 13 10:17:01 CET 2004 - jsrain@suse.cz

- ask for URI (instead of host + queue) if configuring direct
  printing on a remote printer via IPP queue (#48628)
- fixed problem with localizations of texts for unconfigured
  printers (#31168)

-------------------------------------------------------------------
Fri Dec 10 13:27:09 CET 2004 - jsrain@suse.cz

- fixed saving changes to PPD file when printing test page (#48899)
- propose to do local filtering when configuring remove printer or
  setting URI manually (#48627, #48629)
- fixed device URI loss if went back from connection change dialog
  (#49115)

-------------------------------------------------------------------
Wed Dec  1 01:24:02 CET 2004 - nashif@suse.de

- Use docbook macros to build documentation
- Removed unneeded packages from nfb

-------------------------------------------------------------------
Tue Nov  9 15:48:57 CET 2004 - jsrain@suse.cz

- fixed transformation country code -> language name in PPD file
- fixes of Bluetoth printing support

-------------------------------------------------------------------
Fri Nov  5 15:57:15 CET 2004 - jsrain@suse.cz

- changed the text for listenning to remote CUPS servers in the
  summary (#42228)
- allowed to set the addresses from which IPP bcasts should be
  received (#40037)
- 2.11.1

-------------------------------------------------------------------
Thu Nov  4 14:10:59 CET 2004 - jsrain@suse.cz

- basic bluetooth printer configuration support
- adapted to new Mode.ycp
- fixes to new interpreter

-------------------------------------------------------------------
Thu Oct 21 13:27:09 CEST 2004 - jsrain@suse.cz

- added support for localized PPD files (multiple files with the
  same nick name, but different language)
- don't add supported models if there is no PPD file to database
  (#47092)

-------------------------------------------------------------------
Wed Oct 20 10:08:59 CEST 2004 - jsrain@suse.cz

- remove models which don't have any PPD file or record in supported
  printers list from the database (#47092)

-------------------------------------------------------------------
Tue Oct 19 14:56:06 CEST 2004 - jsrain@suse.cz

- using unified messages from Label.ycp/Message.ycp
- fixed includes in the agents
- 2.11.0

-------------------------------------------------------------------
Thu Oct 14 14:53:11 CEST 2004 - jsrain@suse.cz

- fixed the summary if CUPS client-only installation was selected
  in hardware proposal if packages weren't installed before
  (#47082)

-------------------------------------------------------------------
Mon Oct 11 16:31:03 CEST 2004 - jsrain@suse.cz

- adapted to new Arch:: interface

-------------------------------------------------------------------
Thu Oct  7 15:04:34 CEST 2004 - jsrain@suse.cz

- fixed adding PPD files to database if file name contains strange
  characters (#46911)

-------------------------------------------------------------------
Wed Oct  6 09:52:49 CEST 2004 - jsrain@suse.cz

- fixed displaying the links in the summary (now are inside <li>
  tags)
- "test" link in the summary is now localized
- network interface names are passed through String::EscapeTags
  in the summary (#46801)

-------------------------------------------------------------------
Tue Oct  5 14:10:56 CEST 2004 - jsrain@suse.cz

- fix disabling of listenning to CUPS IPP bcasts during
  installation (#46822)
- 2.10.15

-------------------------------------------------------------------
Thu Sep 30 14:44:34 CEST 2004 - jsrain@suse.cz

- fixed data checking causing crash (#46468)
- 2.10.14

-------------------------------------------------------------------
Mon Sep 27 10:44:19 CEST 2004 - jsrain@suse.cz

- fixed freeze when detecting queues of a server (#46015)
- 2.10.13

-------------------------------------------------------------------
Thu Sep 23 16:10:10 CEST 2004 - jsrain@suse.cz

- don't display popups when initializing CUPS or rebuilding
  database of drivers if running in command-line mode (just inform
  via text) (#45924)
- use SuSEFirewall::start to determine if firewall is enabled
  (#45914)
- 2.10.12

-------------------------------------------------------------------
Tue Sep 21 16:07:43 CEST 2004 - jsrain@suse.cz

- finished updating documentation and converting it to docbook

-------------------------------------------------------------------
Fri Sep 17 10:56:51 CEST 2004 - jsrain@suse.cz

- allow to disable listenning to IPP bcasts and adjust firewall
  settings from the main dialog (#45459)
- 2.10.11

-------------------------------------------------------------------
Tue Sep 14 12:48:46 CEST 2004 - jsrain@suse.cz

- fixed testing SMB queues if pasword was specified (#45171)
- fixed testing if queue name for IPP queue is correct (#42140)
- distribute documentation written in docbook inside the package

-------------------------------------------------------------------
Tue Sep 14 08:58:26 CEST 2004 - jsrain@suse.cz

- adapted testsuite to changes in yast2-firewall
- 2.10.10

-------------------------------------------------------------------
Thu Sep  9 13:37:23 CEST 2004 - jsrain@suse.cz

- use "lpstat -r" instead of "lpq" when testing CUPS server
  accessibility ("lpq" failed if no queue was set) (#44915)
- allow testing individual queues directly from hardware proposal
- fixed reinstalling of all related packages (#44744)
- 2.10.9

-------------------------------------------------------------------
Fri Sep  3 14:14:39 CEST 2004 - jsrain@suse.cz

- added GetModified and SetModified functions to _auto client
- fixed enabling/disabling a queue (#44625)
- started making documentation up-to-date and converting to docbook
- 2.10.8

-------------------------------------------------------------------
Fri Aug 27 09:15:54 CEST 2004 - jsrain@suse.cz

- fixed usage of the &product; macro
- separate the number added to the proposed queue name in order to
  distinguish multiple queues for the same printer module by
  underscore ('_') (#44310)
- do not add hardvare vendor name to the proposed queue name
- display in class editation dialog the class members
- do not write default queue to /etc/cups/lpoptions (just remove
  the default queue mark from there) and set it in
  /etc/cups/printers.conf only in order to be compliant with other
  tools (#44237)
- inform in the summary about open ports in firewall for accepting
  IPP bcasts
- merged texts from proofread
- 2.10.7

-------------------------------------------------------------------
Thu Aug 19 16:09:34 CEST 2004 - visnov@suse.cz

- fix command line return type
- 2.10.6

-------------------------------------------------------------------
Tue Aug 17 13:05:45 CEST 2004 - jsrain@suse.cz

- fixed bug in wizard sequence causing crash (#43862)
- fixed Makefile for autogenerated documentation of PPD agent
- correctly initialize packages source and target before
  reinstalling packages (#42569)
- 2.10.5

-------------------------------------------------------------------
Wed Aug 11 12:29:04 CEST 2004 - jsrain@suse.cz

- do not try to detect printers if cloning system via AutoYaST
  (#43627)
- 2.10.4

-------------------------------------------------------------------
Tue Aug 10 09:25:25 CEST 2004 - jsrain@suse.cz

- merged texts from proofread

-------------------------------------------------------------------
Thu Aug  5 12:18:20 CEST 2004 - jsrain@suse.cz

- added widgets for adjusting firewall configuration
- fixed testsuites
- 2.10.3

-------------------------------------------------------------------
Fri Jul 23 13:13:27 CEST 2004 - jsrain@suse.cz

- dropped LPRng support
- updated testsuites
- cleaned-up the code
- updated sorting of PPD files (in order to propose the best one)
- 2.10.2

-------------------------------------------------------------------
Mon Jul 19 13:24:11 CEST 2004 - jsrain@suse.cz

- using Package.*.ycp instead of Require.ycp

-------------------------------------------------------------------
Thu Jul 15 13:49:22 CEST 2004 - jsrain@suse.cz

- adding multiple entries for PPD file to database if it contains
  *1284DeviceID keys (#42988)
- fixed removing of removed PPD files from database (was broken
  when database structure was changed)
- fixed removing of the vendor name from model name if present
  at its beginning (#43051)
- 2.10.1

-------------------------------------------------------------------
Thu Jul  1 12:39:13 CEST 2004 - jsrain@suse.cz

- changed the structure of the database of PPD files (file name
  is the key of the database now)
- added possibility to display all files at once (#37486)
- 2.10.0

-------------------------------------------------------------------
Wed Jun 30 13:27:42 CEST 2004 - jsrain@suse.cz

- enhanced support of HP all-in-one (PTAL) devices (#40712)
- added trivial CUPS browsing proposal (#40713)

-------------------------------------------------------------------
Tue Jun 29 14:10:49 CEST 2004 - jsrain@suse.cz

- don't cut away the "Series" suffix of printer model (#41784)

-------------------------------------------------------------------
Mon Jun 28 15:04:39 CEST 2004 - jsrain@suse.cz

- fixed adding queue with unknown URI type, fixed handling
  the "file" URI type (#42093)
- fixed setting of options of PPD files that are represented as
  radio buttons (#41792)

-------------------------------------------------------------------
Thu May 13 11:28:28 CEST 2004 - jsrain@suse.cz

- fixed YCP compiler warnings (#40416)
- 2.9.26

-------------------------------------------------------------------
Tue May 11 14:49:33 CEST 2004 - jsrain@suse.cz

- fixed setting of CUPS permissions (#40039)
- 2.9.25

-------------------------------------------------------------------
Tue May  4 09:55:49 CEST 2004 - jsrain@suse.cz

- merged texts from proofread
- do not add '-P' parameter to samba_print command line (#38500)
- fixed printed PPD file on test page (#38484)
- fixed typos on testpage (#37095)
- fixed readable version of remote LPD queues (removed 'Filtering'
  from the beginning as they don't have to be filtering) (#38706)
- printing full PPD file nick name on the test page (#37488)
- 2.9.24

-------------------------------------------------------------------
Tue Apr  6 15:27:43 CEST 2004 - jsrain@suse.de

- fixed behavior of lookup button for SMB queues (#38494)
- 2.9.23

-------------------------------------------------------------------
Fri Apr  2 16:01:36 CEST 2004 - jsrain@suse.de

- changed license to GPL
- 2.9.22

-------------------------------------------------------------------
Fri Apr  2 15:00:47 CEST 2004 - jsrain@suse.de

- fixed getting list of available queues of local or remote CUPS
  server (#38108)
- 2.9.21

-------------------------------------------------------------------
Thu Apr  1 13:51:33 CEST 2004 - jsrain@suse.de

- restarting CUPS before printing test page (#37642)
- killing listen_remote_ipp before printing test page or writing
  configuration if still running (#37860)
- 2.9.20

-------------------------------------------------------------------
Wed Mar 31 10:00:31 CEST 2004 - jsrain@suse.de

- fixed setting paper size for detected printers
- ASCII test page doesn't contain localized non-ASCII characters
  (wasn't printed properly with non-ASCII characters) (#37648)
- fixed proposed queue names during hardware proposal (#37552)
- do not try to open file with empty name (if detection of printer
  model fails
- 2.9.19

-------------------------------------------------------------------
Mon Mar 29 15:47:50 CEST 2004 - jsrain@suse.de

- fixed testsuite
- removed lookup button for SMB queues (#33169)
- fixed test_remove_smb script (#33169)
- 2.9.18

-------------------------------------------------------------------
Fri Mar 26 15:42:13 CET 2004 - jsrain@suse.de

- correctly count checksums of PPD files
- prefer Foomatic PPDs to PPDs from manufacturers for printers
  that don't understand PostScript in basic configuration
- fixed testing USB connection for CUPS-like devices (#37129)
- fixed detection of spooler if configuring first time for AustYaST
  profile (#36888)
- 2.9.17

-------------------------------------------------------------------
Mon Mar 22 14:08:17 CET 2004 - jsrain@suse.cz

- install also package with PPD files provided by manufacturers
- fixed Makefile of CUPS and PPD agents
- cleanup after duplicate ASCII test pages
- use &product; macro instead of Product::name (as it is possible
  in all RichTexts)
- 2.9.16

-------------------------------------------------------------------
Fri Mar 19 14:58:04 CET 2004 - mvidner@suse.cz

- added AGENT_LIBADD so that agents work from standalone Perl

-------------------------------------------------------------------
Thu Mar 18 14:35:12 CET 2004 - jsrain@suse.cz

- fixed detection of parallel ports (#36402)

-------------------------------------------------------------------
Mon Mar 15 13:28:06 CET 2004 - jsrain@suse.cz

- fixed testpage printing from the printing filter options dialog
  (not all options were used properly) (#35801)
- reduced spacings in some dialogs, some dialog captions shortened
  (because of the new wizard)
- fixed comments for translators and ydoc
- not using commandline.ycp include
- prefer PPD files provided by manufacturers to other PPD files
  (except downloaded ones)
- wizard buttons consistent with other modules (cancel in the
  first dialog)
- storing information about drivers available on installation
  media
- checking if LPRng is available before offering it as spooler)
- 2.9.15

-------------------------------------------------------------------
Thu Mar 11 14:48:47 CET 2004 - jsrain@suse.de

- check installed spooler when called from hardware proposal
  (#35664)
- lowered severity of message about unproperly installed spooler
  in the hardware proposal (#35227)
- installing printer drivers when they are needed, doesn't check
  if they are installed during startup (#35227)
- updated URLs pointing to on-line info about printer compatibility
  to new SUSE Portal
- get model name from correct entry of the PPD file
- 2.9.14

-------------------------------------------------------------------
Wed Mar 10 14:32:17 CET 2004 - jsrain@suse.de

- fixed division by zero in PPD agent (#35143)

-------------------------------------------------------------------
Wed Mar 10 09:44:13 CET 2004 - jsrain@suse.de

- fixed testsuite
- 2.9.13

-------------------------------------------------------------------
Wed Mar 10 01:55:09 CET 2004 - sh@suse.de

- V 2.9.12
- Migration to new wizard

-------------------------------------------------------------------
Tue Mar  9 09:05:27 CET 2004 - jsrain@suse.de

- Require -> Package (partially)

-------------------------------------------------------------------
Mon Mar  8 17:50:00 CET 2004 - jsrain@suse.de

- setting icon
- 2.9.11

-------------------------------------------------------------------
Sun Mar  7 22:10:07 CET 2004 - kkaempf@suse.de

- more type fixes

-------------------------------------------------------------------
Thu Mar  4 13:48:55 CET 2004 - jsrain@suse.de

- more descriptive texts on the test page (#35306)

-------------------------------------------------------------------
Wed Mar  3 08:58:01 CET 2004 - jsrain@suse.de

- data types more strict

-------------------------------------------------------------------
Mon Mar  1 10:23:58 CET 2004 - jsrain@suse.de

- making all check for PPD file name added to database ignoring
  case (#34767)
- merged texts from proofread
- 2.9.8

-------------------------------------------------------------------
Sat Feb 28 17:56:20 CET 2004 - kkaempf@suse.de

- use counted pointer for YCode

-------------------------------------------------------------------
Thu Feb 26 13:32:41 CET 2004 - jsrain@suse.de

- adding also *.PPD files to database (the check for file name made
  case insensitive) (#34767)

-------------------------------------------------------------------
Sun Feb 22 21:51:17 CET 2004 - kkaempf@suse.de

- adapt testsuite to yast2-core
- 2.9.6

-------------------------------------------------------------------
Thu Feb 19 14:13:44 CET 2004 - jsrain@suse.de

- reduced neededforbuild and requires
- using Require to query installed packages and determine spooler
- fixed exporting CUPS server name for autoinstallation (#34689)

-------------------------------------------------------------------
Thu Feb 19 13:24:14 CET 2004 - mvidner@suse.cz

- changed sort to use "<" instead of "<=" because of the switch to std::sort

-------------------------------------------------------------------
Fri Feb 13 15:55:16 CET 2004 - jsrain@suse.de

- fixed .scr files
- adapted for kernel 2.6 (new name of usb printer module)
- fixed printer adding sequence
- 2.9.5

-------------------------------------------------------------------
Sat Feb  7 09:57:38 CET 2004 - nashif@suse.de

- removed y2cc files
- 2.9.4

-------------------------------------------------------------------
Wed Feb  4 14:21:38 CET 2004 - jsrain@suse.de

- testsuite fixes
- 2.9.3

-------------------------------------------------------------------
Fri Jan 30 11:08:44 CET 2004 - jsrain@suse.de

- tesuite fixes
- other fixes
- 2.9.2

-------------------------------------------------------------------
Fri Jan 16 18:43:32 CET 2004 - jsrain@suse.de

- merged the new interpreter branch

-------------------------------------------------------------------
Thu Dec 11 15:53:26 CET 2003 - jsrain@suse.de

- using (improved) INI-agent for reading and writing CUPS
  configuration files instead of ugly awk scripts, some internal
  structures updated

-------------------------------------------------------------------
Thu Dec  4 17:08:07 CET 2003 - jsrain@suse.de

- added command line support

-------------------------------------------------------------------
Tue Dec  2 17:48:09 CET 2003 - jsrain@suse.de

- fixed autoinstalaltion support
- added support for (partial) import of autoinstallation map
  created using older version (esp. SLES8) (#33127)
- fixed paths for theme pictures for test page
- several other fixes
- 2.9.1

-------------------------------------------------------------------
Thu Nov 27 16:02:16 CET 2003 - jsrain@suse.de

- syntax fixes for the new interpreter

-------------------------------------------------------------------
Fri Nov 14 16:07:42 CET 2003 - jsrain@suse.de

- reading configuration data primarily from spooler (and not from
  YaST's own configuration file
- adapted testsuites
- fixed minor workflow problem
- cleaned printer deletion code
- cleanup of structure representing particular queue and related
  routines

-------------------------------------------------------------------
Thu Nov  6 14:01:35 CET 2003 - jsrain@suse.de

- added support for localized PPD files (recoding of the texts)

-------------------------------------------------------------------
Wed Nov  5 11:47:19 CET 2003 - jsrain@suse.de

- added checking of constraints defined in PPD files

-------------------------------------------------------------------
Tue Nov  4 17:46:25 CET 2003 - jsrain@suse.de

- added support for PickMany and Boolean option types of PPD files

-------------------------------------------------------------------
Thu Oct 30 14:40:30 CET 2003 - jsrain@suse.de

- updated to use new testpage with themes support (#21661)
- printing meaningful info on testpage for raw queues (#30118)

-------------------------------------------------------------------
Fri Oct 24 15:42:16 CEST 2003 - jsrain@suse.de

- broken import cycles of YCP modules, code reorganization
- 2.9.0

-------------------------------------------------------------------
Thu Sep 25 10:07:16 CEST 2003 - jsrain@suse.de

- restart CUPS server if ptal device detected (#31692)
- reinitialize CUPS server name before adjusting default queue
  in /etc/cups/lpoptions (#31547)

-------------------------------------------------------------------
Fri Sep 19 15:50:39 CEST 2003 - jsrain@suse.de

- fixed suplicate occurences of vendor names in vendor list (#31389)
- fixed testpage printing for multiple proposed queues (#31400)
- fixed detection of queues of remote IPP server's (#31416)
- fixed testsuite again
- 2.8.23

-------------------------------------------------------------------
Fri Sep 19 01:53:07 CEST 2003 - nashif@suse.de

- fixed testsuite again
- 2.8.22

-------------------------------------------------------------------
Thu Sep 18 23:36:04 CEST 2003 - nashif@suse.de

- fixed testsuite
- 2.8.21

-------------------------------------------------------------------
Thu Sep 18 14:42:29 CEST 2003 - jsrain@suse.de

- install ghostscript-x11 if no ghostscript package is installed
  (dependency on ghostscript_any can't be solved automatically)
  (#25617)
- 2.8.20

-------------------------------------------------------------------
Mon Sep 15 10:40:11 CEST 2003 - jsrain@suse.de

- fixed adding user constraints to printers (#30790)
- 2.8.19

-------------------------------------------------------------------
Thu Sep 11 12:24:00 CEST 2003 - jsrain@suse.de

- removed obsolete ghostscript call when configuring LPRng printer
  (#30401)

-------------------------------------------------------------------
Tue Sep  9 15:18:08 CEST 2003 - jsrain@suse.de

- adjusting hotlug instead of hotplug_usb again (because of
  reverted change in hotplug package)
- 2.8.18

-------------------------------------------------------------------
Fri Sep  5 08:13:33 CEST 2003 - jsrain@suse.de

- merged texts from proofread 
- fixed adding of support status of printers without any PPD file
  to database (#30120)
- 2.8.17

-------------------------------------------------------------------
Thu Sep  4 15:55:29 CEST 2003 - jsrain@suse.de

- added available support status data for printer models
- reinitialize package manager's target after packages are
  installed or removed, (workaround of #24986)
- fixed creating of database of PPD files during package building
  (files with additional information weren't used correctly)
- 2.8.16

-------------------------------------------------------------------
Wed Sep  3 16:01:25 CEST 2003 - jsrain@suse.de

- fixed checking for changed in database of printers
- creating symlink /etc/printcap -> /etc/cups/printcap if CUPS
  spooler is used (#29671)

-------------------------------------------------------------------
Tue Sep  2 13:08:33 CEST 2003 - jsrain@suse.de

- marked missed texts for translation
- not allowing to download PPD files when using LPRng
  (and cupstestppd isn't installed)
- added missing leading slash to proc/bus/usb/001
- print the chameleon photo on testpage if non-postscript printer
  (#29844)

-------------------------------------------------------------------
Mon Sep  1 13:19:02 CEST 2003 - jsrain@suse.de

- reverted fix of #29432 in order to do the same as is described
  in documentation
- "hotplug_usb status" doesn't return any meaningful exit code,
  check if proc/bus/usb/001 exists instead
- fixed detection of changes of PPD files (#29802)
- always adjust CUPS to be run if CUPS full server configuration
  (#29413)
- 2.8.15

-------------------------------------------------------------------
Fri Aug 29 12:37:17 CEST 2003 - jsrain@suse.de

- adjusting hotlug_usb instead of hotplug
- delete queues deleted not using YaST2, but using CUPS tools
  (#29432)
- 2.8.14

-------------------------------------------------------------------
Thu Aug 28 11:08:17 CEST 2003 - jsrain@suse.de

- checking for valid CUPS server hostname before testing the
  connection to the server (#29414)
- fixed forgetting of CUPS server in CUPS client-only dialog
  (#29411)
- deleting /etc/printcap before switching CUPS -> LPRng (#29440)
- /usr/bin/rm -> /bin/rm
- confirm hardware detection in manual mode (#26515)

-------------------------------------------------------------------
Tue Aug 26 11:30:40 CEST 2003 - jsrain@suse.de

- enabling hotplug service before ptal service is enabled

-------------------------------------------------------------------
Tue Aug 26 08:40:49 CEST 2003 - jsrain@suse.de

- fixed initialization of ptal driver
- 2.8.13

-------------------------------------------------------------------
Mon Aug 25 12:47:24 CEST 2003 - jsrain@suse.de

- fixed plural form in popup informing about files added to
  database (#29152)
- better report when testing filtering queue without setting
  printer model (#29159)
- not deleting proposed queues when running from hardware proposal
  (#29156)
- 2.8.12

-------------------------------------------------------------------
Wed Aug 20 16:40:38 CEST 2003 - jsuchome@suse.de

- removed redundant "initialization dialog" (#28779)
- 2.8.11

-------------------------------------------------------------------
Tue Aug 19 13:20:46 CEST 2003 - jsrain@suse.de

- updated configuration reading function
- removed duplicate records from /var/lib/YaST2/printer
- 2.8.10

-------------------------------------------------------------------
Mon Aug 18 08:55:46 CEST 2003 - jsrain@suse.de

- testpage update
- HP all-in-one devices detection fixed
- several fixes
- 2.8.9

-------------------------------------------------------------------
Thu Aug 14 14:21:46 CEST 2003 - jsrain@suse.de

- removed /etc/sysconfig/printer file handling routines (#28730)
- not asking if remove unneeded CUPS packages when switching to
  CUPS client-only (#28728)
- added checking of existence of called scripts (/etc/init.d/lpd,
  /etc/init.d/hotplug) (#28733)
- fixed detection of printers during module startup (user had to
  push the "Restart detection" button)
- Don't ask user if he wants to save settings, don't display popup
  "Saving OK" (#28729)
- Updated configuration writing function

-------------------------------------------------------------------
Mon Aug 11 16:45:13 CEST 2003 - jsrain@suse.de

- merged texts from proofread
- fixed crash when saving configuration
- updated HP all-in-one (ptal) devices handling
- 2.8.8

-------------------------------------------------------------------
Fri Aug  8 09:59:45 CEST 2003 - jsrain@suse.de

- fixed printer proposal if no local printer found
- replaced summary string informing about listenning to remote CUPS
  servers broadcasts with better understandable message (#28462)
- fixed forgotten running spooler after abort if wasn't running
  before printer configuration
- fixed testpage printing immediately after switch from CUPS
  client-only configuration to full CUPS server confguration

-------------------------------------------------------------------
Mon Aug  4 15:11:03 CEST 2003 - jsrain@suse.de

- displaying error if samba-client or ncpfs package isntallation
  fails
- added .desktop file
- 2.8.7

-------------------------------------------------------------------
Fri Aug  1 13:30:47 CEST 2003 - jsrain@suse.de

- added detection of ptal devices (for CUPS) (#25674)
- 2.8.6

-------------------------------------------------------------------
Wed Jul 30 13:47:29 CEST 2003 - jsrain@suse.de

- fixed building
- 2.8.5

-------------------------------------------------------------------
Thu Jul 24 13:41:02 CEST 2003 - jsrain@suse.de

- fixed proposal - removed unwanted redrawing of screen
- 2.8.4

-------------------------------------------------------------------
Tue Jul 22 08:55:24 CEST 2003 - jsrain@suse.de

- unsetting CUPS_SERVER variable et all (#17651)
- fixed configuring queue via setting URI directly (#28124)

-------------------------------------------------------------------
Mon Jul 21 16:16:21 CEST 2003 - jsrain@suse.de

- also default queue for LPRng is assigned without any environment
  variable (#27259)

-------------------------------------------------------------------
Fri Jul 11 14:44:34 CEST 2003 - jsrain@suse.de

- added possiblity to set default queue for CUPS client-only
  configuration
- 2.8.3

-------------------------------------------------------------------
Thu Jul 10 09:56:56 CEST 2003 - jsrain@suse.de

- removed the Info button from model selection dialog as there is
  no info in Foomatic database
- default queue for CUPS is assigned without any environment
  variable (#27259)

-------------------------------------------------------------------
Wed Jul  9 18:17:00 CEST 2003 - jsrain@suse.de

- added possibility to download PPD files via HTTP/FTP (#14631)

-------------------------------------------------------------------
Tue Jul  8 17:25:15 CEST 2003 - jsrain@suse.de

- fixed packages checking, adapted to foomatic for LPRng usage

-------------------------------------------------------------------
Tue Jun 24 14:21:10 CEST 2003 - jsrain@suse.de

- added function to get all available queues (local and remote)

-------------------------------------------------------------------
Mon Jun 23 16:35:05 CEST 2003 - jsrain@suse.de

- fixed files not owned by any package
- fixed common_popups, common_messages -> YCP modules
- fixed missing imports
- 2.8.2

-------------------------------------------------------------------
Wed Jun  4 08:29:15 CEST 2003 - jsrain@suse.de

- allowed upper letters in queue names (#27163)
- fixed model selecting in NCurses (#27191)

-------------------------------------------------------------------
Mon May 26 10:23:00 CEST 2003 - jsrain@suse.de

- improved CUPS server detection, now allows both active and
  passive method

-------------------------------------------------------------------
Fri May 16 13:04:43 CEST 2003 - jsrain@suse.de

- updated LPRng spooler support, now supports Foomatic

-------------------------------------------------------------------
Wed May 14 13:40:07 CEST 2003 - jsrain@suse.de

- added prebuilt database of PPD files to this package
- updated dialogs, workflow and helps
- 2.8.1

-------------------------------------------------------------------
Tue May  6 10:28:35 CEST 2003 - jsrain@suse.de

- added possibility to configure workgroup of samba printers
  (#26483)

-------------------------------------------------------------------
Mon May  5 17:19:17 CEST 2003 - jsrain@suse.de

- fixed default value for Browsing option of CUPS server (#26516)
- other monor updates

-------------------------------------------------------------------
Wed Apr 23 16:31:29 CEST 2003 - jsrain@suse.de

- updated checking of correctnes of PPD file (#19714), other minor
  updates

-------------------------------------------------------------------
Wed Apr 16 13:36:12 CEST 2003 - jsrain@suse.de

- dropped SuSE database support
- code cleanup

-------------------------------------------------------------------
Tue Apr  8 10:10:39 CEST 2003 - jsrain@suse.de

- showing status of queues in summary (#24816)
- fixed displaying of already configured printers in the list of
  detected printers (#25423)

-------------------------------------------------------------------
Mon Apr  7 10:24:49 CEST 2003 - jsrain@suse.de

- fixed saving of CUPS client-only installation during installation
  (#26097)

-------------------------------------------------------------------
Wed Apr  2 14:46:54 CEST 2003 - jsrain@suse.de

- fixed sorting of models in list - now is done according to locale
- code cleanup
- some optimalizations
- documentation update

-------------------------------------------------------------------
Fri Mar 28 13:11:50 CET 2003 - jsrain@suse.de

- minor change of PPD database format
- added support for faster rebuilding of PPD database
- PPD agent optimalizations
- 2.8.0

-------------------------------------------------------------------
Fri Mar 21 15:32:48 CET 2003 - jsrain@suse.de

- updated ppd agend documentation
- updated testsuites
- fixed choosing PPD file for configuration proposing - in some 
  seldom cases returned not optimal PPD file

-------------------------------------------------------------------
Fri Mar 14 16:44:48 CET 2003 - jsrain@suse.de

- fixed setting focus of OK button in test printer dialog (#25385)

-------------------------------------------------------------------
Fri Mar 14 11:28:51 CET 2003 - jsrain@suse.de

- removed popup whether delete unneeded packages during
  autoinstallation.  These packages aren't removed and user isn't
  asked during autoinstallation now (#25350)
- 2.7.17

-------------------------------------------------------------------
Wed Mar 12 15:18:58 CET 2003 - jsrain@suse.de

- now installing filters package when switching to CUPS (#25181)
- removed superfluous help text (#25188)
- 2.7.16

-------------------------------------------------------------------
Tue Mar 11 15:35:08 CET 2003 - jsrain@suse.de

- fixed displaying of printer name when adding queue to an existing
  printer (#25046)
- fixed encoding of characters on testpage (#25085)

-------------------------------------------------------------------
Mon Mar 10 17:13:15 CET 2003 - jsrain@suse.de

- fixed lpdfilter's lprsetup calling (#24979)
- 2.7.15

-------------------------------------------------------------------
Fri Mar  7 09:01:32 CET 2003 - jsrain@suse.de

- fixed page size of detected printer setting (#24712)
- fixed labels on buttons of popup before configuration saving
  (#24815)
- 2.7.14

-------------------------------------------------------------------
Wed Mar  5 12:43:30 CET 2003 - jsrain@suse.de

- added new testsuites for PPD agent

-------------------------------------------------------------------
Tue Mar  4 16:20:50 CET 2003 - jsrain@suse.de

- updated documentation
- added testsuite for PPD agent

-------------------------------------------------------------------
Mon Mar  3 17:28:05 CET 2003 - jsrain@suse.de

- patched texts from final proofreading
- fixed Foomatic and SuSE database coexistence problems (#24060)
- forcing printer.o loading when hotplug starts if problem with
  automatical loading if USB printer present is detected (#22580)
- 2.7.13

-------------------------------------------------------------------
Mon Mar  3 10:22:05 CET 2003 - jsrain@suse.de

- fixed order of paragraphs of help to remote connections (#19158)
- fixed loading of printer.o module if needed (#22580)

-------------------------------------------------------------------
Thu Feb 27 16:07:13 CET 2003 - jsrain@suse.de

- showing Test button for network queues during installation 
  (Mode::cont) (#24372)
- updated according to new Foomatic PPD files
- fixed configuring printers without Foomatic PPD file (#24090)

-------------------------------------------------------------------
Wed Feb 26 12:41:22 CET 2003 - jsrain@suse.de

- fixed foomatic support for autoinstallation (#24305)

-------------------------------------------------------------------
Tue Feb 25 15:36:17 CET 2003 - jsrain@suse.de

- fixed raw queue help text witn CUPS (#24239)
- allowed to better mix Foomatic and SuSE dadabase data (#24060)
- workflow fix, now always asking for device and model of not
  detected printer (#24240)
- better handling of printers without Foomatic entry (#24010)
- 2.7.12

-------------------------------------------------------------------
Mon Feb 24 11:01:48 CET 2003 - jsrain@suse.de

- tables now corectly react on double click (#24095)
- added prebuilt foomatic database to yast2-printerdb package,
  added handling of prebuilt database (#23917)
- added explainiation to database building progress bar (#24006)
- added time limit for looking for IPP servers (#23915)
- 2.7.11

-------------------------------------------------------------------
Fri Feb 21 10:39:58 CET 2003 - jsrain@suse.de

- now not asking for testing printers if were tested in proposal
  (#24011)
- 2.7.10

-------------------------------------------------------------------
Thu Feb 20 15:14:04 CET 2003 - jsrain@suse.de

- fixed errors in log during installation (#23806)
- fixed sequence when no queue is automatically proposed (#23835)
- fixed sorting of mixed uppercase/lowercase printer model names,
  additionally known problematic names changing to usual
  capitalization (#23834)
- fixed help text to "CUPS USB Device Name Type" dialog (#23972)

-------------------------------------------------------------------
Wed Feb 19 11:01:13 CET 2003 - jsrain@suse.de

- updated ydoc comments

-------------------------------------------------------------------
Tue Feb 18 10:22:36 CET 2003 - jsrain@suse.de

- fixed adjusting of default page size according to locale
  (used PPD file's defaults, typically Letter, now prefers in
  Europe A4)
- fixed displaying of CUPS-like USB device names (didn't include
  serial number)

-------------------------------------------------------------------
Mon Feb 17 14:44:28 CET 2003 - jsrain@suse.de

- fixed import function (#23690)
- fixed re-proposing of CUPS client-only configuration
- 2.7.9

-------------------------------------------------------------------
Tue Feb 11 14:58:02 CET 2003 - jsrain@suse.de

- updated detection of CUPS servers

-------------------------------------------------------------------
Mon Feb 10 17:26:28 CET 2003 - jsrain@suse.de

- added proposing of CUPS client-only configuration
- merged texts from 3rd round of proofreading
- updated method of detection whether module is run by root
- 2.7.8

-------------------------------------------------------------------
Fri Feb  7 15:42:01 CET 2003 - jsrain@suse.de

- fixed configuration of printers autoinstallation (#21998)
- fixed handling of window title-bar close button
- 2.7.7

-------------------------------------------------------------------
Thu Feb  6 12:30:14 CET 2003 - jsrain@suse.de

- merged proofread texts from second round
- added support for non-filtering queues in CUPS

-------------------------------------------------------------------
Mon Feb  3 17:17:17 CET 2003 - jsrain@suse.cz

- several updates and fixes
- 2.7.6

-------------------------------------------------------------------
Wed Jan 29 13:37:29 CET 2003 - jsrain@suse.cz

- Added support for new CUPS USB device names
- Added "Pages per sheet" and "Page orientation" options
- Merged proofread texts

-------------------------------------------------------------------
Tue Jan 28 15:07:29 CET 2003 - jsrain@suse.de

- Fixed sorting of PPD files in PPD file selection
- Fixed deleting of PPD file when was used
- Added possibility to modify model of autodetected printer

-------------------------------------------------------------------
Thu Jan 23 14:29:16 CET 2003 - jsrain@suse.de

- Foomatic database not initializing during hw proposal if not
  needed (#23051)
- Fixed translating of SuSE printers database entries (#19948)
- 2.7.5

-------------------------------------------------------------------
Tue Jan 21 17:58:29 CET 2003 - jsrain@suse.de

- updated Foomatic support
- fixed some usability problems

-------------------------------------------------------------------
Mon Jan 20 13:33:30 CET 2003 - jsrain@suse.de

- added support for pipe and novell printing with CUPS
- updates of Foomatic database support
- 2.7.4

-------------------------------------------------------------------
Wed Jan 15 14:48:59 CET 2003 - jsrain@suse.de

- removed printing to file support
- added support for using some info from SuSE database when using
  Foomatic
- updated help texts
- added additional data files

-------------------------------------------------------------------
Fri Jan 10 16:56:20 CET 2003 - jsrain@suse.de

- workflow and dialogs updates
- added model equivalence list support
- added ppd file preference list support
- updated autoinstallation client, removed write client
- 2.7.3

-------------------------------------------------------------------
Mon Jan  6 15:09:00 CET 2003 - jsrain@suse.de

- severtal updates of Foomatic database support
- 2.7.2

-------------------------------------------------------------------
Fri Dec 20 16:43:51 CET 2002 - jsrain@suse.de

- added basic support for foomatic database
- fixed meaningless help text (#22211)

-------------------------------------------------------------------
Fri Dec  6 16:10:58 CET 2002 - jsrain@suse.cz

- now calling always local CUPS server, ignoring environment
  variable (#21933)
- added more meaningful error messages (#17365)
- 2.7.1

-------------------------------------------------------------------
Thu Nov 28 08:38:28 CET 2002 - jsrain@suse.cz

- added better helptexts (#20131, #18929)
- fixed ordering of help for advanced connections dialog (#19158)
- corrected test disabling (#19693) (jsuchome)
- added test for the case of the bug #19831 (jsuchome)
- added test for the case of the bug #19831 (jsuchome)
- 2.7.0

-------------------------------------------------------------------
Tue Oct  8 13:47:27 CEST 2002 - jsrain@suse.cz

- fixed spooler detection and hardware proposal behaviour in case 
  of inproperly installed spooler (#20681)
- 2.6.42

-------------------------------------------------------------------
Mon Oct  7 11:56:56 CEST 2002 - jsrain@suse.cz

- fixed seting of default queue (#20510)
- 2.6.41

-------------------------------------------------------------------
Wed Oct  2 13:25:20 CEST 2002 - jsrain@suse.cz

- fixed testpage printing after changing queue from YaST2 PPD file
  to non-YaST2 PPD file (#20208)

-------------------------------------------------------------------
Tue Oct  1 08:48:23 CEST 2002 - jsrain@suse.cz

- fixed spooler switching (resulted to incomplete spooler installed)
- 2.6.40

-------------------------------------------------------------------
Mon Sep 30 18:03:06 CEST 2002 - jsuchome@suse.cz

- changed button labels for "Clear current configuration" popup (19824)

-------------------------------------------------------------------
Mon Sep 30 16:25:43 CEST 2002 - jsrain@suse.cz

- made user selection dialog wider because of translations (#19160)
- not showing help for other connection if not in dialog (#20133)

-------------------------------------------------------------------
Thu Sep 26 15:17:43 CEST 2002 - jsuchome@suse.cz

- fixed bug 20151 (module crashes due to wrongly defined sequences)

-------------------------------------------------------------------
Mon Sep 23 12:02:20 CEST 2002 - jsuchome@suse.cz

- corrected tests for printing the testpages

-------------------------------------------------------------------
Fri Sep 20 15:24:05 CEST 2002 - jsuchome@suse.cz

- also ascii testpage changed (bugs 19771, 19777)
- forgotten text added to translation
- fixed bug 19579 (adding manual parameters to printers)
- 2.6.39

-------------------------------------------------------------------
Thu Sep 19 11:28:07 CEST 2002 - jsuchome@suse.cz

- UnitedLinux test page is used to print when needed

-------------------------------------------------------------------
Tue Sep 17 14:28:37 CEST 2002 - jsuchome@suse.cz

- added check for NULL strings when reading ppd file
  to avoid bug #19714

-------------------------------------------------------------------
Thu Sep 12 15:53:58 CEST 2002 - jsuchome@suse.cz

- added a hackto avoid bug #19426
  (reinstalation of printer packages doesn't work properly)
  
-------------------------------------------------------------------
Wed Sep 11 16:07:46 CEST 2002 - jsuchome@suse.cz

- added temporary hack for bug #19354
  (strange tailing characters at the end of ppd file) 
- 2.6.38

-------------------------------------------------------------------
Tue Sep 10 16:05:20 CEST 2002 - jsuchome@suse.cz

- fixed switching CUPS <-> LPRng (bugs #19224, #19226)
- added cups-drivers-stp to delete (#19287)
- corrected parameters for Pkg::DoProvide

-------------------------------------------------------------------
Tue Sep 10 09:33:58 CEST 2002 - mvidner@suse.cz

- Require /usr/bin/host to show names of print servers (#19199).
- 2.6.37

-------------------------------------------------------------------
Mon Sep  9 17:04:33 CEST 2002 - mvidner@suse.cz

- S390/S390x do not have local printers,
  so no warning and no probing is necessary (#19186).
- Fixed failed test case "tests" by faking more Pkg.
- 2.6.36

-------------------------------------------------------------------
Fri Sep  6 17:30:02 CEST 2002 - jsrain@suse.cz

- fixed provides/obsoletes
- 2.6.35

-------------------------------------------------------------------
Thu Sep  5 12:08:55 CEST 2002 - jsrain@suse.cz

- fixed help text for printer URI setting dialog
- 2.6.34

-------------------------------------------------------------------
Wed Sep  4 17:13:26 CEST 2002 - jsrain@suse.cz

- fixed testpage with non-YaST PPD file (Bug #18879)
- 2.6.33

-------------------------------------------------------------------
Tue Sep  3 17:03:23 CEST 2002 - jsrain@suse.cz

- fixed detection if printer deleted outside YaST (Bug #18820)
- adaptations to new package manager (not tested yet)

-------------------------------------------------------------------
Mon Sep  2 16:47:58 CEST 2002 - jsrain@suse.cz

- minor ASCII testpage update
- CUPS starting update
- 2.6.32

-------------------------------------------------------------------
Fri Aug 30 15:39:06 CEST 2002 - jsrain@suse.cz

- fixed remote hosts lookup
- 2.6.31

-------------------------------------------------------------------
Thu Aug 29 16:26:06 CEST 2002 - jsrain@suse.cz

- fixed testsuites
- fixed package manager initialization
- 2.6.30

-------------------------------------------------------------------
Wed Aug 28 17:05:47 CEST 2002 - jsrain@suse.cz

- removed obsolete documentation
- fixed remote queues detection
- 2.6.29

-------------------------------------------------------------------
Tue Aug 27 20:00:00 CEST 2002 - jsuchome@suse.cz

- provide/obsolete old translation packages

-------------------------------------------------------------------
Tue Aug 27 16:48:48 CEST 2002 - jsrain@suse.cz

- minor update of testpage
- fixed cups server starting
- 2.6.28

-------------------------------------------------------------------
Mon Aug 26 17:05:42 CEST 2002 - jsrain@suse.cz

- fixed adjusting services (CUPS and LPD)
- minor testpage and filter settings modifications
- removed J*tD*r*ct string
- 2.6.27

-------------------------------------------------------------------
Thu Aug 22 13:59:10 CEST 2002 - kkaempf@suse.de

- adapt to new package manager

-------------------------------------------------------------------
Thu Aug 22 03:05:42 CEST 2002 - nashif@suse.de

- use Y2Logging namespace for logging
- 2.6.26

-------------------------------------------------------------------
Mon Aug 19 14:06:42 CEST 2002 - jsrain@suse.cz

- Allowed to lookup TCP port printers on other ports than 9100
- Dead code removing
- Minor fixes
- 2.6.25

-------------------------------------------------------------------
Fri Aug 16 18:19:59 CEST 2002 - jsrain@suse.cz

- Fixed checking whether CUPS server is running
- Fixed Printer detection (Bug #17629)
- Fixed workflow on S390 (Bug #17628)
- Fixed help settings
- Merged proofread texts
- Fixed kdoc comments
- 2.6.24

-------------------------------------------------------------------
Sun Aug 11 22:31:24 CEST 2002 - mvidner@suse.cz

- Fix building (testsuite adapted to changes in yast2.rpm, due to #17608).

-------------------------------------------------------------------
Fri Aug  9 15:25:27 CEST 2002 - jsrain@suse.de

- fixed escputil hangup (Bug #17462)
- fixed USB queues configuration for CUPS (Bug #17284)
- asking for detection during installation too
- fixed USB Epson printers configuration for LPRng
- several minor updates and fixes
- 2.6.22

-------------------------------------------------------------------
Mon Aug  5 14:03:07 CEST 2002 - jsrain@suse.cz

- added popup while initializing CUPS server (Bug #17365)
- 2.6.21

-------------------------------------------------------------------
Fri Aug  2 15:27:07 CEST 2002 - jsrain@suse.cz

- more checking whether CUPS server running added (Bug #17365)
- not proposing printers not available for both CUPS and LPRng
- 2.6.20

-------------------------------------------------------------------
Fri Aug  2 10:47:07 CEST 2002 - jsrain@suse.cz

- printer database stuff separated into an extra package
- 2.6.19

-------------------------------------------------------------------
Tue Jul 30 11:47:07 CEST 2002 - jsrain@suse.cz

- fixed comments for translators
- 2.6.18

-------------------------------------------------------------------
Fri Jul 26 13:03:07 CEST 2002 - jsrain@suse.cz

- removed yast2-runlevel from required packages
- printerdb.pot now doesn't contain unwanted texts
- added old yast2-trans- packages to Provides/Obsoletes
- 2.6.17

-------------------------------------------------------------------
Mon Jul 22 08:19:11 CEST 2002 - jsrain@suse.cz

- merged proofread texts
- fixed database .pot-file generation

-------------------------------------------------------------------
Fri Jul 19 10:30:14 CEST 2002 - jsrain@suse.cz

- cups server settings reloaded after confifguraton changed
- testpage fixed
- some message fixed
- minor updates

-------------------------------------------------------------------
Tue Jul 16 14:21:21 CEST 2002 - jsrain@suse.cz

- printer proposal fixed

-------------------------------------------------------------------
Mon Jul 15 18:09:52 CEST 2002 - jsrain@suse.cz

- sequences fixes
- several minor updates

-------------------------------------------------------------------
Mon Jul 15 17:54:27 CEST 2002 - arvin@suse.de

- fixed path for printer database

-------------------------------------------------------------------
Mon Jul 15 13:49:28 CEST 2002 - jsrain@suse.cz

- documentation update (Bug #16850)

-------------------------------------------------------------------
Fri Jul 12 16:17:26 CEST 2002 - arvin@suse.de

- use proper namespace for Args and CallFunction (#16776)

-------------------------------------------------------------------
Fri Jul 12 16:09:23 CEST 2002 - jsrain@suse.cz

- Minor texts updates
- May contain wrong dialog sequences (because of first text-freeze)

-------------------------------------------------------------------
Fri Jul 12 13:52:16 CEST 2002 - jsrain@suse.cz

- Added CUPS server configuration support
- Several bugfixes
- Updates of dialogs

-------------------------------------------------------------------
Fri Jul 05 12:19:17 CEST 2002 - arvin@suse.de

- moved non binary files to /usr/share/YaST2

-------------------------------------------------------------------
Wed Jul  3 14:56:06 CEST 2002 - jsrain@suse.cz

- Updates of proposal, write and auto functions
- Several fixes and minor updates

-------------------------------------------------------------------
Tue Jul  2 09:30:43 CEST 2002 - jsrain@suse.cz

- Several fixes
- Dialogs updates
- Merged cups agent and printer database, all printer related code
  is in this package now
- Renamed to yast2-printer

-------------------------------------------------------------------
Mon Jun 24 16:46:10 CEST 2002 - jsrain@suse.cz

- Helps updates
- Added sorting of installed printers
- Dialog sequence updates
- nonYaST ppd file dialog update, added test button
- Added pipe printing
- Fixed serial printing (Bug #16692)
- Several bugfixes
- Enhanced consistency between spoolers

-------------------------------------------------------------------
Mon Jun 17 09:31:13 CEST 2002 - jsrain@suse.cz

- Added CUPS client-only configuration support
- Added IrDA support
- Added start from scratch
- Added checking printer configuration by selected spooler
- Updated helps
- Added database switching support
- Updated checking of running CUPS server

-------------------------------------------------------------------
Thu Jun  6 08:48:25 CEST 2002 - jsrain@suse.cz

- Updated dialogs and sequences
- Added support for manufacturer's PPD files (Bug #14631)
- Updated sorting of autodetected printers (Bugs #13720 and #15680)

-------------------------------------------------------------------
Mon Jun  3 08:36:38 CEST 2002 - jsrain@suse.cz

- Updated functionality, now configures CUPS classes
- Updated interface to CUPS agent

-------------------------------------------------------------------
Fri May 24 13:04:41 CEST 2002 - jsrain@suse.cz

- Updated functionality, now able to configure CUPS printers
- Updates of user dialogs

-------------------------------------------------------------------
Fri May  3 13:00:05 CEST 2002 - jsrain@suse.cz

- Fixed: "/" now allowed in remote queue names (Bug #16023)
- Documentation file internals.html is installed too.
- Fixed: printing did not work when username or password were
  specified for samba or novell printer. Redirect scripts were
  called improperly.(Bug #15936)

-------------------------------------------------------------------
Thu Apr 18 14:37:04 CEST 2002 - pblahos@suse.cz

- Uses agent instead of client for reading samba queues.

-------------------------------------------------------------------
Mon Apr  8 13:00:51 CEST 2002 - pblahos@suse.cz

- Uses .printerdb instead .printerdb.lpd (accordingly to the
  changes in printer db agent)
- Text "Can not install printer" changed to "Warning" because it
  was used also for supported-problematic printers (Bug #15481)

-------------------------------------------------------------------
Thu Mar 21 15:25:38 CET 2002 - pblahos@suse.cz

- Buttons for testing remote printers/connections are hidden
  during the installation. Network probably doesn't work yet.
  Also testing of raw printers is disabled. (Bug #15192)
- /usr/lib/lpdfilter/bin/lprsetup is called instead of link
  /usr/sbin/lprsetup. (Bug #15212)
- When creating new prefilter and forwarding queues at once,
  forwarding queue name wasn't checked for uniqueness (Bug #15218)

-------------------------------------------------------------------
Mon Mar 18 08:01:47 CET 2002 - pblahos@suse.cz

- _auto module doesn't perform autodetection anymore. (Bug #15083)

-------------------------------------------------------------------
Fri Mar 15 15:02:24 CET 2002 - pblahos@suse.cz

- Added _( ) around "Configuration options". (Bug #15029)

-------------------------------------------------------------------
Wed Mar 13 16:15:32 CET 2002 - pblahos@suse.cz

- Changed button Continue --> OK to satisfy text. (Bug #14836)
- Fixed test of prefiter queues. Corresponding forwarding queue
  wasn't written (Bug #14475)
- Samba/Novell password isn't written into /etc/printcap but to
  /etc/lpdfilter/$QUEUE/redirect, which is lp:lp 0750 (Bug #14106)

-------------------------------------------------------------------
Mon Mar 11 08:44:15 CET 2002 - pblahos@suse.cz

- Hi-color image isn't printed in test print on postscript printers
  (Bug #13776)

-------------------------------------------------------------------
Fri Mar  8 08:39:13 CET 2002 - pblahos@suse.cz

- Installation::continue_mode doesn't exist anymore. Now Mode::cont
  must be used. (Bug #14587)

-------------------------------------------------------------------
Wed Mar  6 15:22:39 CET 2002 - pblahos@suse.cz

- _auto module returns $[] if there is no change (Back or Abort
  pressed) (Bug #14526)
- Directory /etc/gs.upp isn't created anymore. (Bug #14531)
- Popup "Changes will be saved" isn't shown during proposal.
  (Bug #14471)
- Formfeed was handled incorrectly. (Bug #14254)

-------------------------------------------------------------------
Mon Mar  4 13:39:12 CET 2002 - kkaempf@suse.de

- Replace empty locale (translatable string) with normal string,
  (empty strings can't be translated, see #14370).

-------------------------------------------------------------------
Wed Feb 27 16:39:41 CET 2002 - pblahos@suse.cz

- Comment for option is shown if any. (Bug #13992)
- Added comment pointing to an exemplary options into printer
  conf file. (Bug #13954)
- Uses ieee identifiers in addition to db identifiers when getting
  printer name (Bug #13957)
- Correct handling of radio buttons when selecting way of
  configuration of autodetected printer. (Bug #13956)

-------------------------------------------------------------------
Mon Feb 25 16:44:02 CET 2002 - pblahos@suse.cz

- Queue used for testing printer is called y2test.
- Testmode changed: now it works as a screenshot mode.

-------------------------------------------------------------------
Thu Feb 21 15:20:57 CET 2002 - pblahos@suse.cz

- Longer -- more descriptive printer entry in summary.
- Implemented checking of string validity in ValueText
- Links for testing each print queue added to the very first screen
  of printconf (Bug #13514)

-------------------------------------------------------------------
Mon Feb 18 16:47:51 CET 2002 - pblahos@suse.cz

- Main printconf module returns `back, `next or `abort
- Unique keys are saved to libhd.

-------------------------------------------------------------------
Fri Feb  8 16:09:46 CET 2002 - pblahos@suse.cz

- '-' and '_' must not be the first character in the queue name
  (Bug #13114)
- When autoconfiguring printer, the same numeric suffix is appended
  to all queues added to one printer. (Bug #13112)
- Button 'OK' changed to 'Printout finished' during testpage
  printing. Button 'OK' is too attractive. (Bug #13111)

-------------------------------------------------------------------
Thu Feb  7 15:24:48 CET 2002 - pblahos@suse.cz

- Supports Textual options and options aliases (Compound options)
- Proposal infrastructure.
- Reloading of database implemented.

-------------------------------------------------------------------
Mon Feb  4 10:21:49 CET 2002 - pblahos@suse.cz

- support for vendor-supplied databases
- .rc.config.DEFAULT_PRINTER replaced by .sysconfig.printer.DEFAULT_PRINTER
- Call lprsetup with -color.
- Fixed: agent for reading printcap handles result and does not hang
  if there is a comment in printcap
- Added help text saying that default printer becomes default after
  login. (Bug #12065)
- support for foreign database
- "raw" state of the remote printer was set to invalid value (nil)
  and hence the printer wasn't shown in summary (Bug #12970)

-------------------------------------------------------------------
Wed Jan 30 10:18:02 CET 2002 - pblahos@suse.cz

- names of files from /etc/lpdfilter are now allowed as queue names
- '-' allowed in queue name
- code for reading princap and printer settings moved to agent
- Fixed: selection of configuration by clicking on the richtext
  widget didn't work, combo content was grabbed instead.

-------------------------------------------------------------------
Mon Jan 28 15:47:02 CET 2002 - pblahos@suse.cz

- SuSEconfig run and restart of service removed from printconf_write
- printcap lines needn't be finished by \ (backslash)
- lp1, raw, remote are again allowed as printer names
- Adding remote printer works again.

-------------------------------------------------------------------
Mon Jan 21 15:36:01 CET 2002 - pblahos@suse.cz

- Buttons OK and Cancel switched on the parallel port details dialog
- Uses lpdfilter.
- Uses new postscript test page.

-------------------------------------------------------------------
Fri Jan 11 11:31:41 CET 2002 - pblahos@suse.cz

- parallel ports io ports may be specified (Bug#12523)
- uses module Summary
- when adding printer, does initial paper size selection by
  regional settings.
- uses module Report to report errors during save.

-------------------------------------------------------------------
Mon Jan  7 08:42:05 CET 2002 - pblahos@suse.cz

- printconf_auto.ycp: file for autoinstallation data preparation.

-------------------------------------------------------------------
Fri Jan  4 11:18:47 CET 2002 - pblahos@suse.cz

- Uses yast2-agent-printerdb as printer database server.

-------------------------------------------------------------------
Wed Dec  5 10:45:29 CET 2001 - pblahos@suse.cz

- After lookup for hosts on network, first is selected.
- Added 3rd parameter to select to satisfy new libycp.
- Only lower-case queue names are allowed since now. (Bug 12541)
- More encodings in ascii printing settings. All encoding ogonkify
  understands used.(Bug 12522)

-------------------------------------------------------------------
Mon Dec  3 12:58:36 CET 2001 - pblahos@suse.cz

- Uses y2autoconf and create-spec.

-------------------------------------------------------------------
Wed Nov 28 10:58:25 CET 2001 - pblahos@suse.cz

- More test cases.
- Some functions moved from yast2-lib-printer.

-------------------------------------------------------------------
Tue Nov 27 13:16:26 CET 2001 - pblahos@suse.cz

- Return values added to function headers.
- Uses module Runlevel instead of client runlevel_adjust.

-------------------------------------------------------------------
Fri Nov 23 13:31:45 CET 2001 - pblahos@suse.cz

- Some function moved to y2l_printer.

-------------------------------------------------------------------
Tue Nov 20 15:30:00 CET 2001 - pblahos@suse.cz

- Implements module.

-------------------------------------------------------------------
Wed Nov  7 16:15:59 CET 2001 - pblahos@suse.cz

- Really all lookups have 3 parameters.

-------------------------------------------------------------------
Wed Nov  7 14:39:06 CET 2001 - pblahos@suse.cz

- Added third parameter to all lookups.
- Button Set as default is placed below Add/Edit/Delete buttons.
  Hopefully now there is enough space for French translations.
  (Bug 11980)
- Migrated to module Wizard
- Saving of ascii print features works again.

-------------------------------------------------------------------
Fri Oct 26 14:28:08 CEST 2001 - pblahos@suse.cz

- Predefined names for /dev/usb/lp0-7
- Can print to disk file.
- printconf now saves only currently tested printer (and possibly
  its forwarding queue) when doing test-print (Bug #11993)
- printconf is more careful when deleting deleted printer queues
  from disk (Bug #12020)
- Permissions 0755 are set to /etc/gs.upp (Bug #12017)

-------------------------------------------------------------------
Thu Oct 25 10:06:33 CEST 2001 - pblahos@suse.cz

- Writting is faster.
- Permissions 0644 are set to /etc/printcap also when doing test
  print (Bug #6291)

-------------------------------------------------------------------
Wed Oct 24 11:10:40 CEST 2001 - pblahos@suse.cz

- Uses module Progress instead of include progress
- Uses wizard sequencer
- More baud rates for serial printers

-------------------------------------------------------------------
Tue Oct 16 11:37:44 CEST 2001 - pblahos@suse.cz

- Migrated to yast2 devtools

-------------------------------------------------------------------
Wed Oct 10 10:03:44 CEST 2001 - pblahos@suse.cz

- Lookup for all hosts on local network, or for samba servers or
  lpd servers (with opened port 515) is possible. (Bug #9201)

-------------------------------------------------------------------
Mon Oct  1 13:50:31 CEST 2001 - pblahos@suse.cz

- Error/informational messages fixed (Bug #10278)
- It is possible to run configuration even if there is no
  printer database or spooler can not be started.
- When no print-spooler is installed, installation of lprng is
  offered.

-------------------------------------------------------------------
Mon Sep 17 14:31:23 CEST 2001 - pblahos@suse.cz

- When in installation, printconf stops lpd when exiting.
  (Bug #10638)

-------------------------------------------------------------------
Fri Sep 14 16:24:51 CEST 2001 - pblahos@suse.cz

- Abort button works properly in Features dialog. (Bug #10652)
- When testpage printing is not successful, output from lpr
  is shown (Bug #10277)

-------------------------------------------------------------------
Fri Sep 14 09:35:58 CEST 2001 - pblahos@suse.cz

- Now apsfilter-setup should not fail to run without reason (#10265)

-------------------------------------------------------------------
Fri Sep  7 13:32:32 CEST 2001 - pblahos@suse.cz

- creates empty /etc/printcap if it does not exist before starting
  lpd (Bug 10284)
- if unsuccessful in starting lpd, does not bail out (Bug 10284)
- "all" is forbiden as queue name (Bug 10280)
- /dev/usblp? replaced by /dev/usb/lp?
- Unused functions were removed.
- Progress bar fixed: Labels are shown again.

-------------------------------------------------------------------
Thu Aug 30 09:10:02 CEST 2001 - pblahos@suse.cz

- libycp-devel added to needforbuild. Needed for testsuite.

-------------------------------------------------------------------
Mon Aug 27 14:22:54 CEST 2001 - pblahos@suse.cz

- Fixed test suites due new yast2-lib-printer

-------------------------------------------------------------------
Thu Aug 23 16:44:03 CEST 2001 - pblahos@suse.cz

- Fixed some texts.
- Faster saving. Permitions of apsfilterrc_* files are changed at
  the end.

-------------------------------------------------------------------
Fri Aug 17 13:01:30 CEST 2001 - pblahos@suse.cz

- fileexist replaced by SCR::Read(.target.size)!=-1

-------------------------------------------------------------------
Mon Aug 13 12:58:30 CEST 2001 - pblahos@suse.cz

- Replaced spaces by tabs.
- UI (`...) changed to UI:: and SCR (`...) changed to SCR::...
- Removed usbmgr dependencies.

-------------------------------------------------------------------
Thu Aug  9 14:10:37 CEST 2001 - pblahos@suse.cz

- Write modules optimized.
- Uses runlevel_adjust for adjusting lpd service startup.
- When [Finish] is pressed printconf always saves at least empty
  printcap. It allows lprng to run.
- Closes dialog when leaving printconf.
- Back works properly on screen with autoconfigured printers.
- Test button on screen with autoconfigured printer works.
- lprng will be default spooler. Hence when switching print spooler
  to LPD, lprng is installed.

-------------------------------------------------------------------
Thu Aug  2 10:29:53 CEST 2001 - pblahos@suse.cz

- Removed some unnecessarry functions.
- Uses ui/wizard_hw to create dialog with list of configured printers.
- Test suites work again.

-------------------------------------------------------------------
Mon Jul 30 15:30:35 CEST 2001 - pblahos@suse.cz

- Many fixes because new YaST2 libs.
- Glyph BulletArrowRight now points at the default queue.
- Sample command on postscript testpage always contains queue name
  (Bug 9510)

-------------------------------------------------------------------
Fri Jul 27 11:28:42 CEST 2001 - pblahos@suse.cz

- Texts proof-read.
- New workflow for autodetected printers.
- No automatic network lookup. Now there is button Lookup (bug 9201)

-------------------------------------------------------------------
Mon Jul 23 14:38:21 CEST 2001 - pblahos@suse.cz

- Works with new YaST2 libs
- #9016: added keyboard shortcuts to some labels.

-------------------------------------------------------------------
Tue Jun 12 12:37:44 CEST 2001 - pblahos@suse.cz

- Removed wrappers that work around textdomain in includes problem.
- Abort button disabled during startup of module.
- Using functions for test page preparation from yast2-lib-printer
- #8330: removed error records from y2log.
- ps test page does not need to be resized.
- Using smb printers detection routines from yast2-lib-printer. Now
  only hosts with smb are offered. Button Get queues works.
- Using printer detection routines from yast2-lib-printer

-------------------------------------------------------------------
Mon May  7 11:25:06 CEST 2001 - pblahos@suse.cz

- #7688: Textdomain is set before calling functions included from other
  packages. (also related to #7700)
- #7701: manually configured printers were not shown in summary screen.

-------------------------------------------------------------------
Fri May  4 15:28:44 CEST 2001 - pblahos@suse.cz

- #7650: There are again newlines in /etc/printcap after printer was
  edited.
- Ascii print features dialog fix: if test was pressed than any radio
  button or checkbox generated test.
- #7330: Cancel buttons renamed to Back

-------------------------------------------------------------------
Mon Apr 30 10:37:02 CEST 2001 - pblahos@suse.cz

- '+' is allowed in 1284 id. Needed for proper autodetection of
  some printers.

-------------------------------------------------------------------
Fri Apr 27 09:26:38 CEST 2001 - pblahos@suse.cz

- Removed parallel port detection. (See #6239, #7143)
- Accepts .nodetection argument to skip autodetection of printers
  and parallel ports.
- Fixes in summary module.
- Fixes in USB Epson Stylus detection.
- Requires translation package.

-------------------------------------------------------------------
Tue Apr 24 15:16:35 CEST 2001 - pblahos@suse.cz

- Testpage prints again for edited printer
- Starts usbmgr if it does not run.
- Reloading parport_probe before printer detection.
- Added quotes to script that prepares testpage. It is not necessarry
  here but for case.
- Changed detection of parallel ports--uses lib-printer.

-------------------------------------------------------------------
Fri Apr 20 17:00:55 CEST 2001 - pblahos@suse.cz

- Removed isnil
- Removed ' in .target.bash calls.
- #7039: there were badly quoted entries in /etc/apsfilterrc.y2prn*
- #7038: fixed help texts relevant to quick setup changed:
    configured queue need not be necessarry monochrome

-------------------------------------------------------------------
Fri Apr 20 01:02:09 CEST 2001 - ro@suse.de

- isnil fix

-------------------------------------------------------------------
Wed Apr 18 18:12:28 CEST 2001 - pblahos@suse.cz

- make check is made during autobuild.
- Calls escputils to get correct model name for USB Epsons.
- Fixed bad parameters passed to define AnyQuestionPopup.
- Removed .target.bas_background because of fixed target agent.
- Restarting of daemons changed to stop/start from restart.

-------------------------------------------------------------------
Tue Apr 17 13:47:03 CEST 2001 - pblahos@suse.cz

- Main dialog is closed before return.
- Summary module implemented.
- Menuentry moved from Hardware to Misc.
- Does not create unnecessary /usr/lib/YaST2/bin
- Does not require aps, netcat.
- Check for root is performed when printconf is started.
- If cups is installed, uninstallation of cups and installation of
  lprold is supplied to user.

-------------------------------------------------------------------
Fri Apr  6 16:37:01 CEST 2001 - pblahos@suse.cz

- This package requires y2l_printer.
- Test pages moved to y2l_printer.
- Functions for testing connection moved to y2l_printer.
- Fixed bug in apsfilterrc patching.
- When default printer is removed, PRINTER is set to ""
- Used any agent to modify /etc/usbmgr/preload.conf
- Main page of edited printer shows current values.
- Default queue name for autoconfigured printer is lp or printerX.
  (request from jsmeix)

-------------------------------------------------------------------
Thu Mar 29 16:20:09 CEST 2001 - pblahos@suse.cz

- Install documenatation to /usr/share/doc/$RPMNAME
- #6678: Adding printer works also if there are more printers with the
  same name in /etc/printcap
- Installs client scripts to client_non_y2.
- New libycp compilant.

-------------------------------------------------------------------
Mon Mar 26 16:36:05 CEST 2001 - pblahos@suse.cz

- Proof-read.

-------------------------------------------------------------------
Thu Mar 22 14:37:05 CET 2001 - pblahos@suse.cz

- Edit printer screen has preview values.
- When there is no default printer, first added printer becomes default.
- Helptexts updated.

-------------------------------------------------------------------
Wed Mar 21 17:24:50 CET 2001 - ro@suse.de

- re-added Build-Arch noarch to specfile

-------------------------------------------------------------------
Wed Mar 21 17:11:01 CET 2001 - pblahos@suse.cz

- Changes in workflow for autodetected printers.
- Selection of connection is not popup but in-wizard dialog.

-------------------------------------------------------------------
Wed Mar 14 10:18:51 CET 2001 - pblahos@suse.cz

- Every printer connection can be edited.
- Uses wizard library for main dialog.
- Uses .target.control.printer_reset -> package is noarch.

-------------------------------------------------------------------
Wed Mar  7 10:57:28 CET 2001 - pblahos@suse.cz

- Package renamed from y2c_prnt to yast2-config-printer
- It is possible to edit connection settings for some printers.
- #5443: workflow improved: when no printer is configured, printconf starts
  with question: do you want to configure new printer manually?
- Files related to deleted printers are removed.
- Printers can be renamed.
- Manufacturer/model can be changed.
- Help texts improved.
- Changes in upp files made outside of printconf are not killed (replaced)
  by printconf. User is asked if he wants to keep changes or edit settings
  (and kill changes).
- #5598: text explains that lp<number> name for printer is forbidden.
- #5142: better message when there is problem with remote printer (lpd).
- Added progress bar when saving.
- Changed dialog for choosing connection type.
- Added progress bar for initialization.
- Speed optimalization: printers db/macros are global variables.
  They are never passed as functions arguments.
- Speed optimalization: process of localization of printers db
  changed. Now only manuf/model names and comments are translated.
- Speed optimalization: manufacturer names from printers db are
  cached in array. Selection of manufacturers is created faster.
- Speed optimalization: indexes are used as ids in manufacturer/
  model selection.
- Depended options (suboptions) are indented in selection.
- Tag documented_7_1 (changes below).
- Documentation complete.
- Coding rules applied.
- Testsuites implemented.
- #6291: setting permitions of /etc/printcap to 0644, so everyone
  can read it.

-------------------------------------------------------------------
Mon Jan 22 16:39:31 CET 2001 - pblahos@suse.cz

- Button (Finish|Next) is always focused.

-------------------------------------------------------------------
Thu Jan 18 11:43:59 CET 2001 - pblahos@suse.cz

- Ascii testpage improved. Now it contains some ISO-8859-[1|2] characters

-------------------------------------------------------------------
Wed Jan 17 16:50:17 CET 2001 - pblahos@suse.cz

- #5271: does not call anyagent read if unique.inf does not exist
- #5781: invalid initial value nil for apsfilterrc fixed
- added some comments for translators
- skip in autodetected printers works even if there are more printers

-------------------------------------------------------------------
Mon Jan 15 17:01:03 CET 2001 - pblahos@suse.cz

- There is not needed to press back twice in autodetected printer screen
  to quit.
- #5593: yast2 does not offer autoconfiguration of GDI printers.  Dialog
  with printer comment is poped up and next is disabled.
- #5596: list of available parports is taken from /proc/parport again.
  .probe.byclass.comm.par did not return all ports always. Same change
  was done for serial ports.
- #5611: parallel ports additional to that autodetected  by .probe.byclass.comm.par
  are not deleted from modules.conf. It made problem to PCI parport cards.
- #5598: printer name must not be lp<number>
- length of name of ascii printer is checked (must be less then 20)
- added some comments for translators

-------------------------------------------------------------------
Thu Jan 11 22:46:42 CET 2001 - pblahos@suse.de

- added full path to commands on .target.bash
- removed writting START_USB to rc.config (usbmgr is started always)
- removed writting printer to rc.config.d/usb.rc.config (obsoleted)
- write printer to /etc/usbmgr/preload.conf iff there is usb printer

-------------------------------------------------------------------
Thu Jan 11 18:17:36 CET 2001 - pblahos@suse.de

- #5443: partially fixed: items in selection of devices are reordered so
    as parallel is first. First item is selected by default.

-------------------------------------------------------------------
Wed Jan 10 19:33:50 CET 2001 - pblahos@suse.cz

- add init strings for Epson USB printers into /etc/apsfilter.. RESET_BEFORE
- delete old apsfilter... before creating new for new printer
- #5443:when no printer is configured nor autodetected, dialog for choosing
    printer type is popped

-------------------------------------------------------------------
Tue Jan  9 20:08:11 CET 2001 - pblahos@suse.cz

- #5271: calls select iff list is not empty, nor nil (does not call select([],0))
- #5269: Trans was enhanced to accept locale, which can appeas in printers.ycp

-------------------------------------------------------------------
Fri Jan  5 16:16:22 CET 2001 - pblahos@suse.cz

- #5147: /sbin/SuSEconfig call improved
- #5143: print test page when creating prefilter queue with "create new tcpip fwd. queue" now works
- unique keys are saved iff Finish is pressed, not when printing test page.
- if /etc/printcap does not exist, it is created when backing up (printconf_backup)
- depended options fixed: when there was no defaultindex, options may have saved incorrectly

-------------------------------------------------------------------
Tue Jan  2 15:17:36 CET 2001 - pblahos@suse.cz

- uses .probe.byclass.comm.par to read correct parport settings
- when saving, writes correct parport settings to modules.conf (.modules.options)
- reads available parallel/serial ports from .probe.byclass.comm.<par|ser>

-------------------------------------------------------------------
Thu Dec 28 11:53:14 CET 2000 - pblahos@suse.cz

- Button Edit is disabled for tcpip fwd queue and for printers that were not configured with yast2.
- Already configured autodetected printers are not offered again. (uses unique_key and .var.lib.yast.unique)
- First printer does not need be "lp", name for ascii printing is always <name>-ascii. (according to new apsfilter)
- Printer name must not contain '-'
- When editing printer name, ascii name is updated immediately.

-------------------------------------------------------------------
Fri Dec 22 13:00:56 CET 2000 - pblahos@suse.cz

- Depended options fixed by indexing.
- *y2bak files do not retain in /etc.

-------------------------------------------------------------------
Tue Dec 19 21:02:26 CET 2000 - kendy@suse.cz

- #4842: Disable the [Info] button if there is no info available
- #4539: Improved information about non-presence in the database

-------------------------------------------------------------------
Mon Dec 18 15:47:12 CET 2000 - kendy@suse.cz

- Bugfix #4019
- [Test] not allowed for Samba/Windows and Novell
- No need to press [Ok] to begin testing Remote or Prefilter

-------------------------------------------------------------------
Wed Dec 13 19:05:43 CET 2000 - mike@suse.de

- new menuentry file

-------------------------------------------------------------------
Tue Dec 12 21:43:39 CET 2000 - kendy@suse.cz

- new menuentry
- /etc/init.d/usb is wrong, changed to /etc/init.d/usbmgr
- Read(.target.tmpdir) instead of /tmp
- testsuite with the first simple test
  ver. 2.1.7

-------------------------------------------------------------------
Fri Dec  8 01:23:40 CET 2000 - kendy@suse.cz

- All /sbin/init.d changed to /etc/init.d

-------------------------------------------------------------------
Thu Dec  7 16:05:56 CET 2000 - arvin@suse.de

- fix double quoted symbol

-------------------------------------------------------------------
Wed Dec  6 19:26:05 CET 2000 - kendy@suse.cz

- YaST2/include/printconf* to the package
  ver 2.1.4

-------------------------------------------------------------------
Wed Dec  6 14:29:24 CET 2000 - kendy@suse.cz

- .bz2 instead of the .gz
  ver 2.1.3

-------------------------------------------------------------------
Tue Dec  5 17:26:46 CET 2000 - kendy@suse.cz

- Requires: y2d_prnt aps netcat
- printconf_write_printer.ycp renamed to printconf_write.ycp
- .target agent is used instead of Shell, ReadY2, ...
- changes in the layout (the main and the hw indep. settings screens)
- bugfix in choosing the hostname for the printer
  ver. 2.1.2

-------------------------------------------------------------------
Tue Nov 28 10:50:15 CET 2000 - kendy@suse.cz

- Some bugfixes (name for TCP/IP forwarding queue, ...)
- Layout changed according to the sigi's recommendition
  ver. 2.1.1

-------------------------------------------------------------------
Tue Nov  7 18:00:46 CET 2000 - kendy@suse.cz

- Deleting
- Editing
- Setting as default
- Prefilter queues
- Serial printers
- Hardware independent settings (pages per sheet, encoding)
- Ascii test page
  ver. 2.1.0

-------------------------------------------------------------------
Mon Jul 24 14:42:01 MEST 2000 - kendy@suse.cz

- Preselect the autodetected printer if the user chooses [manual]
- "Printer's settings" dialog: preselect the first option
  ver 2.0.11

-------------------------------------------------------------------
Wed Jul 19 15:29:28 MEST 2000 - kendy@suse.cz

- Show OptionComments (if available for given option)
  ver. 2.0.10

-------------------------------------------------------------------
Tue Jul 11 18:04:33 MEST 2000 - kendy@suse.cz

- Do not display manufacturer comment when clicked.
  ver. 2.0.9

-------------------------------------------------------------------
Fri Jun 30 15:38:44 MEST 2000 - kendy@suse.cz

- Changes in buttons; comments in popups when a printer is selected.

-------------------------------------------------------------------
Thu Jun 29 14:30:02 CEST 2000 - kkaempf@suse.de

- requires y2t_prnt

-------------------------------------------------------------------
Wed Jun 28 11:30:10 MEST 2000 - kendy@suse.cz

- Bugfix in Aplying macros on autodetected printers.
  lpd restart before printing the testpage (needed for lprng)

-------------------------------------------------------------------
Mon Jun 26 17:19:15 CEST 2000 - kkaempf@suse.de

- message changes
  version 2.0.6

-------------------------------------------------------------------
Thu Jun 22 12:45:36 CEST 2000 - kendy@suse.cz

- Bugfixes in write of /etc/apsfilterrc.<samba/novell>

-------------------------------------------------------------------
Tue Jun 20 22:04:19 CEST 2000 - kendy@suse.cz

- Bugfixes in dependent options and comparison of IEEE1284 strings.

-------------------------------------------------------------------
Mon Jun 19 17:10:08 MEST 2000 - kendy@suse.cz

- Use of the comments in the database.

-------------------------------------------------------------------
Fri Jun  9 00:52:36 MEST 2000 - kendy@suse.cz

- Samba & Novell printers

-------------------------------------------------------------------
Thu Jun  8 21:15:32 MEST 2000 - kendy@suse.cz

- The structure of the database changed.
  printers.ycp -> printers.ycp & printer_macros.ycp
  Remote printers
  New screen layout

-------------------------------------------------------------------
Fri May 26 16:21:55 CEST 2000 - schwab@suse.de

- Remove noarch.

-------------------------------------------------------------------
Fri May 19 09:44:08 CEST 2000 - kkaempf@suse.de

- initial version

Places

File yast2-printer.changes of Package yast2-printer (Revision ce4aaafa7cbf4a1372643a7c041082cb)

Places