File systemd-presets-branding-openSUSE.changes of Package systemd-presets-branding-openSUSE

Overview Repositories Revisions Requests Users Attributes Meta

File systemd-presets-branding-openSUSE.changes of Package systemd-presets-branding-openSUSE (Revision 66dc6e8239461c3f589fd7b21956a54e)

Currently displaying revision 66dc6e8239461c3f589fd7b21956a54e , Show latest

-------------------------------------------------------------------
Mon Feb  5 11:28:07 CET 2018 - kukuk@suse.de

- Enable backup-rpmdb.timer, backup-sysconfig.timer and
  check-battery.timer, previously cron.daily jobs.

-------------------------------------------------------------------
Tue Jan  2 21:17:07 CET 2018 - sbrabec@suse.com

- Enable new kbdsettings.service (boo#1010880).

-------------------------------------------------------------------
Mon Jan  1 11:27:23 UTC 2018 - wr@rosenauer.org

- enable pcscd socket activation by default to support smartcards
  out of the box (boo#1063983)

-------------------------------------------------------------------
Fri Dec 29 07:53:26 UTC 2017 - zren@suse.com

- Enable lvm2-lvmpolld.socket by default (bsc#1074211)

-------------------------------------------------------------------
Tue Dec 19 10:12:47 UTC 2017 - zren@suse.com

- Enable lvm2-monitor.service by default (bsc#1072492)

-------------------------------------------------------------------
Tue Dec 12 10:05:57 CET 2017 - kukuk@suse.de

- Don't disable services with preset-all in %posttrans, the network
  is special and would be disabled.

-------------------------------------------------------------------
Mon Dec 11 16:17:30 CET 2017 - kukuk@suse.de

- If we do a fresh installation, call systemctl preset-all in the
  %posttrans section. Some services need to be installed before
  systemd or do not strictly require systemd, so systemd would only
  be installed after them and the systemd units of this package
  never enabled.

-------------------------------------------------------------------
Mon Dec 11 16:02:43 CET 2017 - kukuk@suse.de

- Enable klog.service and rsyslog.service by default, currently
  they enable themself always in post install section.

-------------------------------------------------------------------
Wed Dec  6 13:47:02 CET 2017 - kukuk@suse.de

- Enable btrfs-*.timer by default, switch from cron to systemd.timer
- Enable btrfsmaintenance-refresh.service

-------------------------------------------------------------------
Thu Nov  9 02:08:17 UTC 2017 - sckang@suse.com

- Enable ModemManager.service by default (bsc#1038402).

-------------------------------------------------------------------
Fri Nov  3 09:12:26 UTC 2017 - olaf@aepfle.de

- Move common entries into default-SUSE.preset (bsc#1060676)

-------------------------------------------------------------------
Tue Oct 17 06:11:39 UTC 2017 - olaf@aepfle.de

- Sort entries with :'<,'>!sort -t ' ' -k 2 (bsc#1060676)

-------------------------------------------------------------------
Tue Jun 20 08:59:59 CEST 2017 - kukuk@suse.de

- Enable ca-certificates to run on boot and on demand to create
  database in /var/lib/ca-certificates

-------------------------------------------------------------------
Tue Mar 21 12:40:03 UTC 2017 - meissner@suse.com

- removed duplicated iscsid.socket iscsid.servicce (bsc#1030161)

-------------------------------------------------------------------
Fri Mar 17 17:04:13 CET 2017 - sbrabec@suse.com

- Bump version to 12.2 to make version numbers consistent between
  SLE and Leap (boo#1029775).
- Remove superfluous uuidd.service. uuidd.socket is sufficient
  (bsc#1012850#c8).

-------------------------------------------------------------------
Tue Feb 21 08:55:53 UTC 2017 - zren@suse.com

- Enable socket/service(s) for lvm2 (bsc#1011053)

-------------------------------------------------------------------
Fri Feb 10 09:46:22 UTC 2017 - fbui@suse.com

- Enable by default uuidd shipped by util-linux (bsc#1012850)

util-linux was previously shipping a preset file enabling uuidd by
  default. This is now done here as other packages are not supposed to
  ship their own preset rules.

Also increase the package version so util-linux can conflict with
  the previous versions and hence will be updated *after* the new
  version of the presets package is. This is important otherwise if
  util-linux removed its preset file first, then the presets package
  would believe a new change in the presets and you enable again
  uuidd.

-------------------------------------------------------------------
Tue Jan 24 09:20:33 UTC 2017 - dimstar@opensuse.org

- Enable the issue-generator.service by default: /etc/issue is in
  progress of no longer being a static file, but being generated by
  a service, which allows for much more flexible content (think
  ssh key fingerprint or similar).

-------------------------------------------------------------------
Thu Dec 15 08:42:09 UTC 2016 - dimstar@opensuse.org

- Fix pre/post scripts:
  + On %pre case, when updating from an old version of the package
    that did not yet contain
    %{_prefix}/lib/%{generic_name}/branding-preset-states, we can't
    start it. Add a check for execute permission on the script.

-------------------------------------------------------------------
Thu Dec  8 16:40:15 UTC 2016 - fbui@suse.com

- Import preset macros from systemd-rpm-macro and convert them into
  scripts.

Presets are not supposed to be shipped by other packages as the
  default policy needs to be reviewed by the secteam. Therefore don't
  encourage packagers to do that and make those macros private to this
  package.

Also convert them into real scripts so they're much easier to
  maintain and debug. Also working in %posttrans is unneeded as this
  package is assumed to be the only one to update the preset.

-------------------------------------------------------------------
Thu Dec  8 15:00:17 UTC 2016 - fbui@suse.com

- There's no need to reload the daemon configuration as presets are
  not part of the dameon config.

-------------------------------------------------------------------
Tue Nov 29 12:17:22 UTC 2016 - meissner@suse.com

- added snapper-cleanup.timer and snapper-timeline.timer (bsc#1011891)

-------------------------------------------------------------------
Tue Jun 14 22:33:02 UTC 2016 - ken@suse.com

- enable vmblock-fuse service for VMWare by default (bsc#986277)

-------------------------------------------------------------------
Thu Jun  9 14:01:53 UTC 2016 - lnussel@suse.de

- don't require systemd to avoid dependency loop (boo#983986)

-------------------------------------------------------------------
Tue May 31 14:54:00 UTC 2016 - meissner@suse.com

- added a prereq for coreutils to make sure the macro in %pre
  works when using touch and mkdir. (bsc#982337)

-------------------------------------------------------------------
Mon May  9 11:27:29 UTC 2016 - trenn@suse.de

- enable mcelog by default instead of using an udev rule on
  /dev/mcelog (bsc#976781)

-------------------------------------------------------------------
Thu Mar 24 10:18:46 UTC 2016 - meissner@suse.com

- enable remote-fs.target, getty@.service. (bsc#972489)

-------------------------------------------------------------------
Wed Dec 16 13:21:29 UTC 2015 - lnussel@suse.de

- don't enable ModemManager and wpa_supplicant. Both will be started
  on demand (bnc#717130)

-------------------------------------------------------------------
Wed Dec 16 11:47:20 UTC 2015 - eich@suse.com

- Add display-manager.service to defaults presets (boo#958880).

-------------------------------------------------------------------
Tue Dec  8 17:20:37 CET 2015 - sbrabec@suse.com

- Enable fstrim.timer and disable fstrim.service. TRIM should be
  performed once a week and not on every boot (FATE#317727).
  http://www.spinics.net/lists/util-linux-ng/msg09133.html

-------------------------------------------------------------------
Tue Aug  4 18:09:29 CEST 2015 - sbrabec@suse.com

- Add %systemd_preset_pre and %systemd_preset_posttrans (fixes
  boo#921075 and all future requests to change service default).

-------------------------------------------------------------------
Wed Jul 15 14:29:34 UTC 2015 - jkeil@suse.de

- Enable updatedb timer for mlocate package
  * Replaces cron.daily script

-------------------------------------------------------------------
Wed Jul 15 13:32:53 UTC 2015 - jkeil@suse.de

- Enable timer for periodic password & group file integrity verification

-------------------------------------------------------------------
Wed Jul 15 08:28:23 UTC 2015 - olaf@aepfle.de

- Remove xendomains.service from systemd preset file because it
  conflicts with libvirt-guests.service (bnc#937371)
  Its up to the admin to run systemctl enable xendomains.service

-------------------------------------------------------------------
Tue Jun 30 22:43:34 UTC 2015 - crrodriguez@opensuse.org

- If selinux is used, restorecond should be enabled by default.
  The relevant unit only starts if the system was booted with
  selinux enabled
- Do not start acpid by default, its functionality is provided
  by logind nowadays.

-------------------------------------------------------------------
Wed Apr  1 18:34:50 UTC 2015 - crrodriguez@opensuse.org

- Native systemd unit apparmor.service need to be enabled 
  by default.

-------------------------------------------------------------------
Mon Mar  9 14:26:42 UTC 2015 - meissner@suse.com

- enabled smartd by default (bnc#921075)

-------------------------------------------------------------------
Tue Jan 13 17:51:26 UTC 2015 - olaf@aepfle.de

- enable xencommons and xendomains (bnc#897352)

-------------------------------------------------------------------
Fri Dec 19 21:31:02 UTC 2014 - mlatimer@suse.com

- enable vmtoolsd service for VMWare by default (bnc#901272)

-------------------------------------------------------------------
Wed Dec  3 07:21:35 UTC 2014 - lwang@suse.com

- remove: enable lvm2-lvmetad.service   (bnc#901859)

-------------------------------------------------------------------
Thu Nov 20 17:07:10 UTC 2014 - gber@opensuse.org

- enable storage-fixup.service by default due to conversion

-------------------------------------------------------------------
Thu Jun 26 08:51:33 UTC 2014 - glin@suse.com

- enable wpa_supplicant.service (bnc#860885 comment#20)

-------------------------------------------------------------------
Wed May 28 06:40:13 UTC 2014 - lwang@suse.com

- enable lvm2-lvmetad.socket (bnc#878473)
  enable lvm2-lvmetad.service

-------------------------------------------------------------------
Fri Apr 11 08:58:36 UTC 2014 - meissner@suse.com

- enable auditd, haveged and irqbalance services by default. bnc#872066

-------------------------------------------------------------------
Wed Apr  2 23:54:58 UTC 2014 - crrodriguez@opensuse.org

- Enable the logrotate.timer that replaces the cron-based
  activation by default.

-------------------------------------------------------------------
Fri Mar  7 17:31:10 UTC 2014 - matwey.kornilov@gmail.com

- Enable epmd.socket so that epmd.service can be properly
  socket-activated instead of forking by beam. The later leads to
  the issue when epmd is killed at the stop of the specific service
  and all erlang instances crashes as a consequence.
  Needed by erlang package. (bnc#869112)

-------------------------------------------------------------------
Thu Feb 13 11:44:28 PST 2014 - lduncan@suse.com

- Enable iscsi daemon socket and iscsi service as installed,
  so that iscsid.service can be socket-activated. (bnc#853300)

-------------------------------------------------------------------
Sat Feb  1 09:54:04 CET 2014 - ohering@suse.de

- Revert last change for hyper-v.rpm 
  Both daemons are started on demand via udev rules.

-------------------------------------------------------------------
Wed Dec 18 15:54:08 CET 2013 - ohering@suse.de

- Enable hv_kvp_daemon and hv_vss_daemon from hyper-v pkg

-------------------------------------------------------------------
Thu Oct 17 10:38:17 PDT 2013 - lduncan@suse.com

- Enable iscsid socket and iscsi service by default when
  installed (bnc#827654).

-------------------------------------------------------------------
Wed Jul 31 15:52:59 UTC 2013 - fcrozat@suse.com

- Enable ModemManager.service is enabled when installed (it will be
  dbus-activated by NM).

-------------------------------------------------------------------
Thu Jul 25 12:12:04 UTC 2013 - fcrozat@suse.com

- Rename main default file to 90-default-openSUSE.preset and move
  the "disable everything" part to a separate file
  "99-default-disable.preset". This allows fine tuning with
  additional files, if needed (same as Fedora).

-------------------------------------------------------------------
Fri May  3 11:30:28 UTC 2013 - meissner@suse.com

- as we have multiversion kernels enabled by default, we also
  need to enable purge-kernels by default (bnc#818317).

-------------------------------------------------------------------
Fri Feb 22 09:04:00 UTC 2013 - mt@suse.com

- Do not unconditionally enable NetworkManager service as this
  breaks running /etc/init.d/network on update (bnc#803058).

-------------------------------------------------------------------
Wed Oct 17 13:07:59 UTC 2012 - fcrozat@suse.com

- Change location of presets with latest systemd.

-------------------------------------------------------------------
Tue Sep 11 12:40:36 UTC 2012 - aj@suse.de

- Add nscd service (bnc#778981).

-------------------------------------------------------------------
Wed Jul  4 11:36:54 UTC 2012 - fcrozat@suse.com

- Add cups units (service, path and socket) (bnc#769346).

-------------------------------------------------------------------
Mon Dec 12 10:17:57 UTC 2011 - fcrozat@suse.com

- Add postfix (bnc#727403).

-------------------------------------------------------------------
Wed Oct 26 13:58:29 UTC 2011 - lnussel@suse.de

- don't enable sysstat by default (bnc#725791)

-------------------------------------------------------------------
Mon Oct 17 15:59:43 UTC 2011 - fcrozat@suse.com

- Add sysstat.service (bnc#723858).

-------------------------------------------------------------------
Sun Oct 16 09:52:50 UTC 2011 - coolo@suse.com

- buildignore branding for systemd to avoid bootstrap cycle

-------------------------------------------------------------------
Fri Oct  7 12:55:48 UTC 2011 - fcrozat@suse.com

- Add Yast2 FirstBoot and Second Stage.

-------------------------------------------------------------------
Thu Sep 29 10:47:35 UTC 2011 - fcrozat@suse.com

- Don't enable avahi-dnsconfd.service after all.

-------------------------------------------------------------------
Thu Sep 29 09:50:25 UTC 2011 - fcrozat@suse.com

- Enable avahi-daemon.service and avahi-dnsconfd.service

-------------------------------------------------------------------
Thu Sep 29 09:09:29 UTC 2011 - fcrozat@suse.com

- Enable cron.service

-------------------------------------------------------------------
Mon Sep 26 16:13:37 UTC 2011 - fcrozat@suse.com

- Initial package

Places

File systemd-presets-branding-openSUSE.changes of Package systemd-presets-branding-openSUSE (Revision 66dc6e8239461c3f589fd7b21956a54e)

Places