File procps-3.2.7-top.1.diff of Package procps

Overview Repositories Revisions Requests Users Attributes Meta

File procps-3.2.7-top.1.diff of Package procps (Revision 718ad4842044ed6bd63a4b675a5eb6af)

Currently displaying revision 718ad4842044ed6bd63a4b675a5eb6af , Show latest

--- procps-3.2.7/top.1
+++ procps-3.2.7/top.1	2006-06-26 16:34:01.000000000 +0200
@@ -20,7 +20,7 @@
 ..
 .\" Setup ////////////////////////////////////////////////////////////////
 \#  ** Comment out '.nr' or set to 0 to eliminate WIDTH fiddlin' !
-.nr half_xtra 4
+.nr half_xtra 0
 .
 .ll +(\n[half_xtra] + \n[half_xtra])
 .
@@ -504,7 +504,7 @@ and 'Order fields' screens.
 .\" ......................................................................
 .SS 2b. SELECTING and ORDERING Columns
 .\" ----------------------------------------------------------------------
-After pressing the \*(CIs 'f' (Fields select) or \'o' (Order fields) you will
+After pressing the \*(CIs 'f' (Fields select) or 'o' (Order fields) you will
 be shown a screen containing the current \fBfields string\fR followed by names
 and descriptions for all fields.
 
@@ -580,7 +580,7 @@ Use either of these keys if you have a l
 see current status,
 
 .TP 7
-\ \ \'\fB?\fR\' or \'\fBh\fR\' :\fIHelp\fR
+\ \ '\fB?\fR' or '\fBh\fR' :\fIHelp\fR
 There are two help levels available.
 The first will provide a reminder of all the basic \*(CIs.
 If \*(Me is\fI secured\fR, that screen will be abbreviated.
@@ -589,7 +589,7 @@ Typing 'h' or '?' on that help screen wi
 applicable to \*(AM.
 
 .TP 7
-\ \ \'\fB=\fR\' :\fIExit_Task_Limits\fR
+\ \ '\fB=\fR' :\fIExit_Task_Limits\fR
 Removes restrictions on which tasks are shown.
 This command will reverse any 'i' (idle tasks) and 'n' (max tasks) commands
 that might be active.
@@ -599,13 +599,13 @@ See the '-p' \*(CO for a discussion of P
 When operating in \*(AM this command has a slightly broader meaning.
 
 .TP 7
-\ \ \'\fBA\fR\' :\fIAlternate_Display_Mode_toggle\fR
+\ \ '\fBA\fR' :\fIAlternate_Display_Mode_toggle\fR
 This command will switch between \*(FM and \*(AM.
 \*(XT 4. ALTERNATE\-DISPLAY Mode and the 'G' \*(CI for insight into
 \*(CWs and field groups.
 
 .TP 7
-\ \ \'\fBB\fR\' :\fIBold_Disable/Enable_toggle\fR
+\ \ '\fBB\fR' :\fIBold_Disable/Enable_toggle\fR
 This command will influence use of the 'bold' terminfo capability and
 alters\fB both\fR the \*(SA and \*(TA for the \*(CW.
 While it is intended primarily for use with dumb terminals, it can be
@@ -617,7 +617,7 @@ Thus, unless the 'x' and/or 'y' toggles 
 there will be no visual confirmation that they are even on.
 
 .TP 7
-*\ \'\fBd\fR\' or \'\fBs\fR\' :\fIChange_Delay_Time_interval\fR
+*\ '\fBd\fR' or '\fBs\fR' :\fIChange_Delay_Time_interval\fR
 You will be prompted to enter the delay time, in seconds, between
 display updates.
 
@@ -631,32 +631,32 @@ If at any time you wish to know the curr
 and view the system summary on the second line.
 
 .TP 7
-\ \ \'\fBG\fR\' :\fIChoose_Another_Window/Field_Group\fR
+\ \ '\fBG\fR' :\fIChoose_Another_Window/Field_Group\fR
 You will be prompted to enter a number between 1 and 4 designating the
 window/field group which should be made the \*(CW.
 You will soon grow comfortable with these 4 windows, especially after
 experimenting with \*(AM.
 
 .TP 7
-\ \ \'\fBI\fR\' :\fIIrix/Solaris_Mode_toggle\fR
+\ \ '\fBI\fR' :\fIIrix/Solaris_Mode_toggle\fR
 When operating in 'Solaris mode' ('I' toggled \*F), a task's \*(Pu usage
 will be divided by the total number of \*(PUs.
 After issuing this command, you'll be informed of the new state of this toggle.
 
 .TP 7
-\ \ \'\fBu\fR\' :\fIselect a user\fR
+\ \ '\fBu\fR' :\fIselect a user\fR
 You will be prompted for a UID or username. Only processes
 belonging to the selected user will be displayed. This option
 matches on the effective UID.
 
 .TP 7
-\ \ \'\fBU\fR\' :\fIselect a user\fR
+\ \ '\fBU\fR' :\fIselect a user\fR
 You will be prompted for a UID or username. Only processes
 belonging to the selected user will be displayed. This option
 matches on the real, effective, saved, and filesystem UID.
 
 .TP 7
-*\ \'\fBk\fR\' :\fIKill_a_task\fR
+*\ '\fBk\fR' :\fIKill_a_task\fR
 You will be prompted for a PID and then the signal to send.
 The default signal, as reflected in the prompt, is SIGTERM.
 However, you can send any signal, via number or name.
@@ -667,24 +667,24 @@ depending on your progress:
    2) at the signal prompt, type 0
 
 .TP 7
-\ \ \'\fBq\fR\' :\fIQuit\fR
+\ \ '\fBq\fR' :\fIQuit\fR
 
 .TP 7
-*\ \'\fBr\fR\' :\fIRenice_a_Task\fR
+*\ '\fBr\fR' :\fIRenice_a_Task\fR
 You will be prompted for a PID and then the value to nice it to.
 Entering a positive value will cause a process to lose priority.
 Conversely, a negative value will cause a process to be viewed more
 favorably by the kernel.
 
 .TP 7
-\ \ \'\fBW\fR\' :\fIWrite_the_Configuration_File\fR
+\ \ '\fBW\fR' :\fIWrite_the_Configuration_File\fR
 This will save all of your options and toggles plus the current
 display mode and delay time.
 By issuing this command just before quitting \*(Me, you will be able restart
 later in exactly that same state.
 
 .TP 7
-\ \ \'\fBZ\fR\' :\fIChange_Color_Mapping
+\ \ '\fBZ\fR' :\fIChange_Color_Mapping
 This key will take you to a separate screen where you can change the
 colors for the \*(CW, or for all windows.
 For details regarding this \*(CI \*(Xt 3d. COLOR Mapping.
@@ -704,21 +704,21 @@ These commands always impact just the \*
 \*(CWs and field groups.
 
 .TP 7
-\ \ \'\fBl\fR\' :\fIToggle_Load_Average/Uptime\fR \*(EM On/Off
+\ \ '\fBl\fR' :\fIToggle_Load_Average/Uptime\fR \*(EM On/Off
 This is also the line containing the program name (possibly an alias) when
 operating in \*(FM or the \*(CW name when operating in \*(AM.
 
 .TP 7
-\ \ \'\fBm\fR\' :\fIToggle_Memory/Swap_Usage\fR \*(EM On/Off
+\ \ '\fBm\fR' :\fIToggle_Memory/Swap_Usage\fR \*(EM On/Off
 This command affects two \*(SA lines.
 
 .TP 7
-\ \ \'\fBt\fR\' :\fIToggle_Task/Cpu_States\fR \*(EM On/Off
+\ \ '\fBt\fR' :\fIToggle_Task/Cpu_States\fR \*(EM On/Off
 This command affects from 2 to many \*(SA lines, depending on the state
 of the '1' toggle and whether or not \*(Me is running under true SMP.
 
 .TP 7
-\ \ \'\fB1\fR\' :\fIToggle_Single/Separate_Cpu_States\fR \*(EM On/Off
+\ \ '\fB1\fR' :\fIToggle_Single/Separate_Cpu_States\fR \*(EM On/Off
 This command affects how the 't' command's Cpu States portion is shown.
 Although this toggle exists primarily to serve massively-parallel SMP machines,
 it is not restricted to solely SMP environments.
@@ -750,12 +750,12 @@ global 'B' (bold disable) toggle.
 .in
 
 .TP 7
-\ \ \'\fBb\fR\' :\fIBold/Reverse_toggle\fR
+\ \ '\fBb\fR' :\fIBold/Reverse_toggle\fR
 This command will impact how the 'x' and 'y' toggles are displayed.
 Further, it will only be available when at least one of those toggles is \*O.
 
 .TP 7
-\ \ \'\fBx\fR\' :\fIColumn_Highlight_toggle\fR
+\ \ '\fBx\fR' :\fIColumn_Highlight_toggle\fR
 Changes highlighting for the current sort field.
 You probably don't need a constant visual reminder of the sort field and
 \*(Me hopes that you always run with 'column highlight' \*F, due to the cost
@@ -765,7 +765,7 @@ If you forget which field is being sorte
 visual reminder.
 
 .TP 7
-\ \ \'\fBy\fR\' :\fIRow_Highlight_toggle\fR
+\ \ '\fBy\fR' :\fIRow_Highlight_toggle\fR
 Changes highlighting for "running" tasks.
 For additional insight into this task state, \*(Xt 2a. DESCRIPTIONS of Fields,
 Process Status.
@@ -774,7 +774,7 @@ Use of this provision provides important
 The only costs will be a few additional tty escape sequences.
 
 .TP 7
-\ \ \'\fBz\fR\' :\fIColor/Monochrome_toggle\fR
+\ \ '\fBz\fR' :\fIColor/Monochrome_toggle\fR
 Switches the \*(CW between your last used color scheme and the older form
 of black-on-white or white-on-black.
 This command will alter\fB both\fR the \*(SA and \*(TA but does not affect the
@@ -785,24 +785,24 @@ state of the 'x', 'y' or 'b' toggles.
 .B CONTENT\fR of \*(TW
 .PD 0
 .TP 7
-\ \ \'\fBc\fR\' :\fICommand_Line/Program_Name_toggle\fR
+\ \ '\fBc\fR' :\fICommand_Line/Program_Name_toggle\fR
 This command will be honored whether or not the 'Command' column
 is currently visible.
 Later, should that field come into view, the change you applied will be seen.
 
 .TP 7
-\ \ \'\fBf\fR\' and \'\fBo\fR\' :\fIFields_select\fR or \fIOrder_fields\fR
+\ \ '\fBf\fR' and '\fBo\fR' :\fIFields_select\fR or \fIOrder_fields\fR
 These keys display separate screens where you can change which
 fields are displayed and their order.
 For additional information on these \*(CIs
 \*(Xt 2b. SELECTING and ORDERING Columns.
 
 .TP 7
-\ \ \'\fBH\fR\' :\fIThreads_toggle\fR
+\ \ '\fBH\fR' :\fIThreads_toggle\fR
 When this toggle is \*O, all individual threads will be displayed.  Otherwise, \*(Me displays a summation of all threads in a process.
 
 .TP 7
-\ \ \'\fBS\fR\' :\fICumulative_Time_Mode_toggle\fR
+\ \ '\fBS\fR' :\fICumulative_Time_Mode_toggle\fR
 When 'Cumulative mode' is \*O, each process is listed with the \*(Pu
 time that it and its dead children have used.
 
@@ -818,7 +818,7 @@ If you wish to know in advance whether o
 effect, simply ask for help and view the window summary on the second line.
 
 .TP 7
-\ \ \'\fBu\fR\' :\fIShow_Specific_User_Only\fR
+\ \ '\fBu\fR' :\fIShow_Specific_User_Only\fR
 You will be prompted to enter the name of the user to display.
 Thereafter, in that \*(TW only matching User ID's will be shown, or possibly
 no tasks will be shown.
@@ -831,7 +831,7 @@ just press <Enter> at the prompt, withou
 .B SIZE\fR of \*(TW
 .PD 0
 .TP 7
-\ \ \'\fBi\fR\' :\fIIdle_Processes_toggle\fR
+\ \ '\fBi\fR' :\fIIdle_Processes_toggle\fR
 Displays all tasks or just active tasks.
 When this toggle is \*F, idled or zombied processes will not be displayed.
 
@@ -839,7 +839,7 @@ If this command is applied to the last \
 affect the window's size, as all prior \*(TDs will have already been painted.
 
 .TP 7
-\ \ \'\fBn\fR\' or \'#\' :\fISet_Maximum_Tasks\fR
+\ \ '\fBn\fR' or '#' :\fISet_Maximum_Tasks\fR
 You will be prompted to enter the number of tasks to display.
 The lessor of your number and available screen rows will be used.
 
@@ -878,12 +878,12 @@ The sort field might\fI not\fR be visibl
 .in
 
 .TP 7
-\ \ \'\fB<\fR\' :\fIMove_Sort_Field_Left\fR
+\ \ '\fB<\fR' :\fIMove_Sort_Field_Left\fR
 Moves the sort column to the left unless the current sort field is
 the first field being displayed.
 
 .TP 7
-\ \ \'\fB>\fR\' :\fIMove_Sort_Field_Right\fR
+\ \ '\fB>\fR' :\fIMove_Sort_Field_Right\fR
 Moves the sort column to the right unless the current sort field is
 the last field being displayed.
 
@@ -894,7 +894,7 @@ the current sort field is visible.
 .in
 
 .TP 7
-\ \ \'\fBF\fR\' or \'\fBO\fR\' :\fISelect_Sort_Field\fR
+\ \ '\fBF\fR' or '\fBO\fR' :\fISelect_Sort_Field\fR
 These keys display a separate screen where you can change which field
 is used as the sort column.
 
@@ -907,7 +907,7 @@ This \*(CI can be a convenient way to si
 when running \*(Me with column highlighting turned \*F.
 
 .TP 7
-\ \ \'\fBR\fR\' :\fIReverse/Normal_Sort_Field_toggle\fR
+\ \ '\fBR\fR' :\fIReverse/Normal_Sort_Field_toggle\fR
 Using this \*(CI you can alternate between high-to-low and low-to-high sorts.
 
 .PP
@@ -984,7 +984,7 @@ know what window is the \*(CW.
 .\" ......................................................................
 .SS 4b. COMMANDS for Windows
 .TP 7
-\ \ \'\fB-\fR\' and \'\fB_\fR\' :\fIShow/Hide_Window(s)_toggles\fR
+\ \ '\fB-\fR' and '\fB_\fR' :\fIShow/Hide_Window(s)_toggles\fR
 The '-' key turns the \*(CW's \*(TD \*O and \*F.
 When \*O, that \*(TA will show a minimum of the columns header you've
 established with the 'f' and 'o' commands.
@@ -998,7 +998,7 @@ If all 4 \*(TDs are currently visible, t
 as the only display element.
 
 .TP 7
-*\ \'\fB=\fR\' and \'\fB+\fR\' :\fIEqualize_(re-balance)_Window(s)\fR
+*\ '\fB=\fR' and '\fB+\fR' :\fIEqualize_(re-balance)_Window(s)\fR
 The '=' key forces the \*(CW's \*(TD to be visible.
 It also reverses any 'i' (idle tasks) and 'n' (max tasks) commands that might
 be active.
@@ -1009,7 +1009,7 @@ They will also have retained any customi
 except for the 'i' (idle tasks) and 'n' (max tasks) commands.
 
 .TP 7
-*\ \'\fBA\fR\' :\fIAlternate_Display_Mode_toggle\fR
+*\ '\fBA\fR' :\fIAlternate_Display_Mode_toggle\fR
 This command will switch between \*(FM and \*(AM.
 
 The first time you issue this command, all four \*(TDs will be shown.
@@ -1017,7 +1017,7 @@ Thereafter when you switch modes, you wi
 chosen to make visible.
 
 .TP 7
-*\ \'\fBa\fR\' and \'\fBw\fR\' :\fINext_Window_Forward/Backward\fR
+*\ '\fBa\fR' and '\fBw\fR' :\fINext_Window_Forward/Backward\fR
 This will change the \*(CW, which in turn changes the window to which
 commands are directed.
 These keys act in a circular fashion so you can reach any desired \*(CW
@@ -1028,7 +1028,7 @@ whenever the \*(CW name loses its emphas
 the \*(TD is \*F and many commands will be restricted.
 
 .TP 7
-*\ \'\fBG\fR\' :\fIChoose_Another_Window/Field_Group\fR
+*\ '\fBG\fR' :\fIChoose_Another_Window/Field_Group\fR
 You will be prompted to enter a number between 1 and 4 designating the
 window/field group which should be made the \*(CW.
 
@@ -1037,15 +1037,15 @@ In \*(AM, it is simply a less convenient
 commands.
 
 .TP 7
-\ \ \'\fBg\fR\' :\fIChange_Window/Field_Group_Name\fR
+\ \ '\fBg\fR' :\fIChange_Window/Field_Group_Name\fR
 You will be prompted for a new name to be applied to the \*(CW.
 It does not require that the window name be visible
 (the 'l' toggle to be \*O).
 
 .IP "*" 3
 The \*(CIs shown with an \*(AS have use beyond \*(AM.
-    \'=', 'A', 'G'  are always available
-    \'a', 'w'       act the same when color mapping
+    '=', 'A', 'G'  are always available
+    'a', 'w'       act the same when color mapping
 
 
 .\" ----------------------------------------------------------------------

Places

File procps-3.2.7-top.1.diff of Package procps (Revision 718ad4842044ed6bd63a4b675a5eb6af)

Places