openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File pv.changes of Package pv (Revision 30f6fd2abb516371c6348b835e568351)

Currently displaying revision 30f6fd2abb516371c6348b835e568351 , Show latest

-------------------------------------------------------------------
Sun Jul 30 23:59:53 UTC 2023 - Jan Engelhardt <jengelh@inai.de>

- Update to release 1.7.24
  * correct terminal size detection (was broken by 1.7.17)

-------------------------------------------------------------------
Fri Jul 28 11:42:58 UTC 2023 - Jan Engelhardt <jengelh@inai.de>

- Update to release 1.7.18
  * New "--sync" option to flush cache to disk after every write
  * New "--direct-io" option to bypass cache

-------------------------------------------------------------------
Mon Jul 17 21:18:13 UTC 2023 - Jan Engelhardt <jengelh@inai.de>

- Update to release 1.7.0
  * The "--size" option now accepts "@filename" to use the size
    of another file.
  * New "--bits" option to show bit count instead of byte count.
  * New "--average-rate-window" option, to set the window over
    which the average rate is calculated, also used for ETA.
  * The "--watchfd" option will now show relative filenames, if
    they are under the current directory.
  * Add burst rate limit to transfer, so rate limits are not
    broken by bursty traffic.
  * Corrected elapsed time display to show as D:HH:MM:SS after 1
    day, like the ETA does.

-------------------------------------------------------------------
Fri Nov  5 19:58:05 UTC 2021 - Jan Engelhardt <jengelh@inai.de>

- Update to release 1.6.20
  * Starting pv in the background no longer immediately stops
    unless the transfer is to/from the terminal.
  * Using -B, -A, or -T now switches on -C implicitly.

-------------------------------------------------------------------
Tue Sep  8 08:48:09 UTC 2020 - Jan Engelhardt <jengelh@inai.de>

- Trim old specfile constructs.

-------------------------------------------------------------------
Mon Aug  7 23:34:32 UTC 2017 - jengelh@inai.de

- Update to new upstream release 1.6.6
  * Fix target buffer size (-B) being ignored
  * Cap read/write sizes, and check elapsed time during read/write
    cycle to avoid display hangs with large buffers or slow media.
  * Report error in "-d" if process fd directory is unreadable, or
    if process disappears before we start the main loop.

-------------------------------------------------------------------
Fri Mar 27 17:00:05 UTC 2015 - jengelh@inai.de

- Update to new upstream release 1.6.0
* new option "-D" / "--delay-start" to only show bar after
  N seconds
* new option "--fineta" / "-I" to show ETA as time of day rather
  than time remaining
* change ETA (--eta / -e) so that days are given if the hours
  remaining are 24 or more
* repeat read and write attempts on partial buffer fill/empty to
  work around post-signal transfer rate drop
* output errors on a new line to avoid overwriting transfer bar

-------------------------------------------------------------------
Mon Dec  8 00:36:36 UTC 2014 - jengelh@inai.de

- Update to new upstream release 1.5.7
* show KiB instead of incorrect kiB
* work around awk bug in tests/016-numeric-timer in decimal ","
  locales

-------------------------------------------------------------------
Mon May  5 06:12:30 UTC 2014 - jengelh@inai.de

- Update to new upstream release 1.5.3
* Added new display options --buffer-percent, --last-written
* New transfer option --no-splice
* New option --watchfd to monitor file descriptor status of another
  process, rather than moving data from stdin to stdout.

-------------------------------------------------------------------
Mon Aug 12 10:47:57 UTC 2013 - jengelh@inai.de

- Update to new upstream release 1.4.12
* A fix for splice() not using stdin was implemented
* A new -0/--null option has been added to count NUL-terminated
  "lines"

-------------------------------------------------------------------
Wed Jun  5 17:11:16 UTC 2013 - jengelh@inai.de

- Add explicit BuildRequires for usleep

-------------------------------------------------------------------
Fri Jan 25 03:26:52 UTC 2013 - jengelh@inai.de

- Update to new upstream release 1.4.6
* updated manual page to show known problem with "-R" on Cygwin
* added patch from Pawel Piatek to omit O_NOFOLLOW in AIX

-------------------------------------------------------------------
Mon Dec 24 06:48:09 UTC 2012 - jengelh@inai.de

- Update to new upstream release 1.4.4
* fix crash when progress is displayed with too-small terminal
* new option --skip-errors
* new option --stop-at-size to stop after --size bytes
* autodetermine size if stdout is a block device
* fix a use-after-free bug

-------------------------------------------------------------------
Tue Nov 20 15:18:41 UTC 2012 - jengelh@inai.de

- Update to new upstream release 1.3.9
* new --pidfile option to save process ID to a file
* integrated patch for --numeric with --timer and --bytes
* removed signalling from --remote to prevent accidental process kills
* new --format option and allow --format parameters to be sent
  with --remote

-------------------------------------------------------------------
Sat Sep  1 11:09:24 UTC 2012 - jengelh@inai.de

- Update to new upstream release 1.3.4
* new --disable-splice configure script option
* fixed line mode size count with multiple files
- Use RH-friendly make install

-------------------------------------------------------------------
Mon Jun 25 22:14:15 UTC 2012 - pascal.bleser@opensuse.org

- update to 1.3.1:
  * do not use splice() if the write buffer is not empty
- changes from 1.3.0:
  * fix 1024-boundary display garble
  * use splice(2) where available
  * added known bugs section of the manual page
  * use IEEE1541 units
  * bug with rate limit under 10 fixed
  * speed up PV line mode

-------------------------------------------------------------------
Tue May 22 05:53:15 UTC 2012 - jengelh@inai.de

- Feed through format_spec_file to get copyright header required
  for factory inclusion

-------------------------------------------------------------------
Mon Feb 20 06:52:34 UTC 2012 - jengelh@medozas.de

- Update license field to SPDX format
- Use short URL
- Remove redundant tags/sections from specfile
- Parallel build with %_smp_mflags

-------------------------------------------------------------------
Fri Jan 14 19:00:38 UTC 2011 - pascal.bleser@opensuse.org

- change RPM group to System/Base instead of invalid group System/Tools

-------------------------------------------------------------------
Tue Dec 14 16:06:49 UTC 2010 - pascal.bleser@opensuse.org

- update to 1.2.0:
  * an average rate display option was added to better show progress with bursty traffic
  * a consistent exit status is set to help script writers
  * various minor cleanups and bug fixes were made

-------------------------------------------------------------------
Tue Nov  9 21:55:09 UTC 2010 - pascal.bleser@opensuse.org

- moved to utilities

-------------------------------------------------------------------
Thu Mar  6 00:00:00 UTC 2008 - guru@unixtech.be

- new upstream version

-------------------------------------------------------------------
Mon Oct 22 00:00:00 UTC 2007 - guru@unixtech.be

- moved to openSUSE Build Service

-------------------------------------------------------------------
Thu Aug 30 00:00:00 UTC 2007 - guru@unixtech.be

- new upstream version

-------------------------------------------------------------------
Fri Aug  3 00:00:00 UTC 2007 - guru@unixtech.be

- new upstream version

-------------------------------------------------------------------
Mon Feb  5 00:00:00 UTC 2007 - guru@unixtech.be

- new upstream version

-------------------------------------------------------------------
Tue Feb 28 00:00:00 UTC 2006 - guru@unixtech.be

- new upstream version

-------------------------------------------------------------------
Thu Dec  8 00:00:00 UTC 2005 - guru@unixtech.be

- added debuginfo support
- use makeinstall macro
- use configure macro
- added autoreconf
- use install_info SUSE macros
- use find_lang macro
- rewrote spec file
- new upstream version

-------------------------------------------------------------------
Fri Jun 17 00:00:00 UTC 2005 - guru@unixtech.be

- version 0.9.1

-------------------------------------------------------------------
Sun Nov  7 00:00:00 UTC 2004 - guru@unixtech.be

- version 0.8.9

-------------------------------------------------------------------
Mon May  3 00:00:00 UTC 2004 - guru@unixtech.be

- version 0.8.5

-------------------------------------------------------------------
Sun Apr 25 00:00:00 UTC 2004 - guru@unixtech.be

- version 0.8.2

-------------------------------------------------------------------
Tue Apr 20 00:00:00 UTC 2004 - guru@unixtech.be

- version 0.8.1

-------------------------------------------------------------------
Sun Feb  8 00:00:00 UTC 2004 - guru@unixtech.be

- version 0.7.0

-------------------------------------------------------------------
Tue Jan  6 00:00:00 UTC 2004 - guru@unixtech.be

- new spec-file

Places

File pv.changes of Package pv (Revision 30f6fd2abb516371c6348b835e568351)

Places