File libsigrokdecode.changes of Package libsigrokdecode.16873

Overview Repositories Revisions Requests Users Attributes Meta

File libsigrokdecode.changes of Package libsigrokdecode.16873

-------------------------------------------------------------------
Wed Dec 11 22:24:06 UTC 2019 - Stefan Brüns <stefan.bruens@rwth-aachen.de>

- Update to 0.5.3
  * New supported protocol decoders:
    - lin: Local Interconnect Network (LIN) protocol
    - x2444m: Xicor X2444M/P nonvolatile static RAM protocol
    - ds2408: 1-Wire 8-channel addressable switch
    - cc1101: Low-power sub-1GHz RF transceiver chip
    - enc28j60: Microchip ENC28J60 10Base-T Ethernet controller protocol
    - pca9571: NXP PCA9571 8-bit I²C output expander
    - seven_segment: 7-segment display protocol
    - amulet_ascii: Amulet Technologies LCD controller ASCII protocol
    - tdm_audio: TDM multi-channel audio protocol
    - signature: Annotate signature of logic patterns
    - nes_gamepad: NES gamepad button states
    - flexray: Automotive network communications protocol
    - ir_rc6: RC-6 infrared remote control protocol
    - ieee488: IEEE-488 General Purpose Interface Bus (GPIB/HPIB or IEC)
    - hdcp: HDCP protocol over HDMI
  * Several other improvements, see included NEWS file
  * The library API and ABI is compatible with version 0.5.2

-------------------------------------------------------------------
Wed Sep 12 21:19:08 UTC 2018 - Stefan Brüns <stefan.bruens@rwth-aachen.de>

- Update to 0.5.2
  * New supported protocol decoders:
    - mcs48: Intel MCS-48 external memory access protocol
    - st7735: Sitronix ST7735 TFT controller protocol
    - atsha204a: Microchip ATSHA204A CryptoAuthentication device
    - cfp: 100 Gigabit C form-factor pluggable (CFP) protocol
    - jtag_ejtag: MIPS EJTAG protocol
    - swim: STM8 Single Wire Interface Module (SWIM) protocol
    - cec: HDMI Consumer Electronics Control (CEC) protocol
    - miller: Miller encoding protocol
    - ook: On-off keying protocol
    - ook_oregon: Oregon Scientific weather sensor protocol
    - ook_vis: OOK visualisation in various formats
  * Several other improvements, see included NEWS file
  * The library API and ABI is compatible with version 0.5.1
- Cleanup: remove %defattr, use %license

-------------------------------------------------------------------
Fri Apr 13 15:53:08 UTC 2018 - stefan.bruens@rwth-aachen.de

- Update to 0.5.1
  * New (backported) supported protocol decoders:
    - ac97: Audio and modem control for PC systems
    - ds243x: Maxim DS243x series 1-Wire EEPROM protocol
    - maple_bus: Maple bus peripheral protocol for SEGA Dreamcast
    - morse: Demodulated morse code protocol
    - graycode: Accumulate rotary encoder increments, timing statistics
    - counter: Count number of edges
    - sda2506: Serial nonvolatile 1-Kbit EEPROM
    - rc_encode: PT2262/HX2262/SC5262 remote control encoder protocol
  * The library API and ABI is compatible with version 0.5.0
  * Support for the PD v2 API has been dropped. All PDs distributed
    with libsigrokdecode were converted to the new, query-based API.

-------------------------------------------------------------------
Sat Jul  1 14:28:50 UTC 2017 - stefan.bruens@rwth-aachen.de

- Remove Obsoletes: libsigrokdecode3. Obsoletes implies a conflict,
  so there is no way in rpm to trigger deinstalation of deprecated
  shared library packages.

-------------------------------------------------------------------
Tue Jun 13 20:31:26 UTC 2017 - stefan.bruens@rwth-aachen.de

- Update to 0.5.0
  * New supported protocol decoders:
    - ade77xx          Poly phase multifunction energy metering IC protocol
    - adf435x          Wideband synthesizer with integrated VCO
    - dali             DALI lighting control protocol
    - dsi              DSI lighting control protocol
    - eeprom93xx       93xx series Microwire EEPROM protocol (bug #931)
    - iec              Commodore serial IEEE-488 (IEC) bus protocol
    - microwire        3-wire, half-duplex, synchronous serial bus (bug #931)
  * Add support for the new query-based PD v3 decoder API.

-------------------------------------------------------------------
Mon Dec 26 23:39:34 UTC 2016 - stefan.bruens@rwth-aachen.de

- Update to 0.4.1
  * New (backported) supported protocol decoders:
    - aud              Renesas/Hitachi Advanced User Debugger (AUD) protocol
    - avr_pdi          Atmel proprietary interface for the ATxmega MCU
    - dmx512           Professional lighting control protocol
    - em4305           EM4205/EM4305 100-150kHz RFID protocol
    - gpib             IEEE-488 GPIB / HPIB protocol
    - ps2              PS/2 keyboard/mouse interface
    - rgb_led_ws281x   RGB LED string protocol (WS281x)
    - ssi32            Synchronous Serial Interface (32bit) protocol
    - t55xx            T55xx 100-150kHz RFID protocol
    - wiegand          Wiegand interface for electronic entry systems
  * Introduce a decoders/common facility for code shared between PDs (bug #804).
  * Supply metadata to all stacked decoders, not just low-level ones (bug #664).
  * Various Doxygen/documentation improvements.
  * Factor out a srd_decoder_apiver() internal helper function.
  * srd_inst_decode(): Return SRD_ERR_ARG if unitsize is 0.
  * Print error messages when decoders fail load time checks (bug #704).
  * Fix multiple valgrind warnings (memory leaks and such).
  * Build system: Sort PD list alphabetically in "make install".
  * Enhancements to several PDs, see NEWS for details.
- Drop upstream 0001-Supply-metadata-to-stacked-decoders.patch

-------------------------------------------------------------------
Fri Feb 12 16:56:06 UTC 2016 - stefan.bruens@rwth-aachen.de

- Propagate metadata (e.g. samplerate) to stacked decoders
  * Add 0001-Supply-metadata-to-stacked-decoders.patch

-------------------------------------------------------------------
Sat Jan 30 12:21:20 UTC 2016 - stefan.bruens@rwth-aachen.de

- Update to 0.4.0
  * New supported protocol decoders:
    - adns5020:      Bidirectional command and data over an
                     SPI-like protocol
    - am230x:        Aosong AM230x/DHTxx/RHTxx humidity/temperature
                     sensor
    - arm_etmv3:     Decode ETM instruction trace packets
    - arm_itm:       Trace data from Cortex-M / ARMv7m ITM module
    - arm_tpiu:      Filter TPIU formatted trace data into separate
                     streams
    - eeprom24xx:    24xx series I²C EEPROM protocol
    - em4100:        EM4100 100-150kHz RFID protocol
    - jitter:        Retrieves the timing jitter between two digital
                     signals
    - max7219:       8-digit LED display driver
    - mdio:          Half-duplex sync serial bus for MII management
                     (MAC/PHY)
    - modbus:        Modbus RTU protocol for industrial applications
    - mrf24j40:      IEEE 802.15.4 2.4 GHz RF tranceiver chip
    - nrf24l01:      2.4GHz transceiver chip
    - pwm:           Analog level encoded in duty cycle percentage
    - qi:            Async serial protocol for Qi charger receivers
    - rfm12:         HopeRF RFM12 wireless transceiver control
                     protocol
    - sdcard_sd:     Secure Digital card (SD mode) low-level
                     protocol
    - spdif:         Serial bus for connecting digital audio devices
    - stepper_motor: Absolute position and movement speed from
                     step/dir
    - swd:           Two-wire protocol for debug access to ARM CPUs
    - tca6408a:      Texas Instruments TCA6408A 8-bit I²C I/O
                     expander
    - timing:        Calculate time between edges
    - usb_power_delivery: USB Power Delivery protocol
    - usb_request:   USB (low-speed and full-speed)
                     transaction/request protocol

-------------------------------------------------------------------
Fri Sep 25 03:10:52 UTC 2015 - stefan.bruens@rwth-aachen.de

- Track GIT version (upcoming 0.4.0)
  * update libsigrokdecode-versioned-decoders.patch

-------------------------------------------------------------------
Tue Aug  4 14:56:23 UTC 2015 - max@suse.com

- New version: 0.3.1:
  * This is mostly a bugfix-release, the C library API was not
    changed.
  * Improvements and bugfixes in existing protocol decoders.
  * New decoders: adns5020, am230x, arm_etmv3, arm_itm, arm_tpiu,
    eeprom24xx, jitter, mdio, mrf24j40, nrf24l01, pwm, rfm12,
    spdif, stepper_motor, swd, tca6408a, timing.

-------------------------------------------------------------------
Fri Oct 24 11:26:48 UTC 2014 - dimstar@opensuse.org

- Add libsigrokdecode-versioned-decoders.patch: move decoders to
  a versioned subdirectory.
- Change RPM Group of the library package to System/Libraries.

-------------------------------------------------------------------
Thu Oct 23 11:52:31 UTC 2014 - max@suse.com

- Keep the decoders under /usr/share/libsigrokdecode (unversioned)
  otherwise the library won't find them.

-------------------------------------------------------------------
Sun Aug  3 09:48:52 UTC 2014 - dmitry_r@opensuse.org

- Change package license to GPL-3.0+ according to README
- Minor spec file cleanup

-------------------------------------------------------------------
Mon Jun  2 18:53:48 UTC 2014 - bugs@vdm-design.de

- sync spec file with .spec from rmax

-------------------------------------------------------------------
Fri May 30 10:20:06 UTC 2014 - bugs@vdm-design.de

- Update to 0.3.0
  * New supported protocol decoders:
    - guess_bitrate  Guess the bitrate/baudrate of a signal
    - ir_nec         NEC infrared remote control protocol
    - ir_rc5         RC-5 infrared remote control protocol
    - midi           Musical Instrument Digital Interface
    - parallel       Parallel synchronous bus decoder
    - rgb_led_spi    RGB LED string decoder (SPI)
    - xfp            10 Gigabit Small Form Factor Pluggable Module
    - z80            Zilog Z80 microprocessor disassembly 
  * New features:
    - Support for annotation rows (groups of annotation classes to be shown together).
    - The new OUTPUT_BINARY facility allows PDs to output decoded data in various (file) formats (e.g. I²S output in WAV format, USB output in PCAP format for Wireshark, LCD controller output in PNG format for viewing, and so on).
    - The new OUTPUT_META facility allows PDs to report certain data points or events to the frontend, which can be used for various post-processing and statistics purposes (e.g. simple counts, average/mean values, min/max values, and more).
    - The protocol decoder API has changed, the API version is bumped to 2. Decoders using the old PD API no longer work with this library release.
    - A large amount of PD fixes have been done to improve the usability of all PDs when used with GUIs (long/short annotations for zoom-dependent display, corrected annotation sample numbers, use of annotation rows, and so on).
    - Various API improvements were also performed to allow for all the new features. You can take a look at the API docs for more details.
    - And of course all PDs and the library code have received quite a few bugfixes, as usual.

-------------------------------------------------------------------
Thu Jan 24 17:39:58 UTC 2013 - max@suse.com

- Requires python3.

-------------------------------------------------------------------
Wed Jan 16 15:22:45 UTC 2013 - max@suse.com

- Initial build from git snapshot.

Places

File libsigrokdecode.changes of Package libsigrokdecode.16873

Places