File cross-aarch64-binutils.changes of Package cross-rx-binutils

Overview Repositories Revisions Requests Users Attributes Meta

File cross-aarch64-binutils.changes of Package cross-rx-binutils (Revision c3f0ed773c46ea65c4b5dca6316a9a60)

Currently displaying revision c3f0ed773c46ea65c4b5dca6316a9a60 , Show latest

-------------------------------------------------------------------
Fri Oct  8 14:11:44 UTC 2021 - Michael Matz <matz@suse.com>

- Configure with --disable-x86-used-note on old code streams.
- Disable libalternatives temporarily for build cycle reasons.
- make TARGET-bfd=headers again, we patch bfd-in.h
- This state submitted to SLE12 and SLE15 code streams for annual
  toolchain update. [jsc#PM-2767, jsc#SLE-21561, jsc#SLE-19618]
- Bump binutils-2.37-branch.diff to 66d5c7003, to include fixes for
  PR28422, PR28192, PR28391.  Also adds some s390x arch14
  instructions [jsc#SLE-18637].

-------------------------------------------------------------------
Fri Sep 10 23:16:12 CEST 2021 - Stefan Schubert schubi@suse.de

- Using libalternatives instead of update-alternatives.

-------------------------------------------------------------------
Wed Sep  8 15:09:58 UTC 2021 - Michael Matz <matz@suse.com>

- Adjust for testsuite fails on older products that configure
  binutils in different ways, adds  binutils-compat-old-behaviour.diff
  and adjusts binutils-revert-nm-symversion.diff and
  binutils-revert-plt32-in-branches.diff.

-------------------------------------------------------------------
Tue Aug  3 13:36:19 UTC 2021 - Martin Liška <mliska@suse.cz>

- Bump binutils-2.37-branch.diff: fixes PR28138.

-------------------------------------------------------------------
Thu Jul 22 17:36:14 UTC 2021 - Martin Liška <mliska@suse.cz>

- Use LTO & PGO build.

-------------------------------------------------------------------
Thu Jul 22 15:01:27 UTC 2021 - Martin Liška <mliska@suse.cz>

- Update to binutils 2.37:
  * The GNU Binutils sources now requires a C99 compiler and library to
    build.
  * Support for the arm-symbianelf format has been removed.
  * Support for Realm Management Extension (RME) for AArch64 has been
    added.
  * A new linker option '-z report-relative-reloc' for x86 ELF targets
    has been added to report dynamic relative relocations.
  * A new linker option '-z start-stop-gc' has been added to disable
    special treatment of __start_*/__stop_* references when
    --gc-sections.
  * A new linker options '-Bno-symbolic' has been added which will
    cancel the '-Bsymbolic' and '-Bsymbolic-functions' options.
  * The readelf tool has a new command line option which can be used to
    specify how the numeric values of symbols are reported.
    --sym-base=0|8|10|16 tells readelf to display the values in base 8,
    base 10 or base 16.  A sym base of 0 represents the default action
    of displaying values under 10000 in base 10 and values above that in
    base 16.
  * A new format has been added to the nm program.  Specifying
    '--format=just-symbols' (or just using -j) will tell the program to
    only display symbol names and nothing else.
  * A new command line option '--keep-section-symbols' has been added to
    objcopy and strip.  This stops the removal of unused section symbols
    when the file is copied.  Removing these symbols saves space, but
    sometimes they are needed by other tools.
  * The '--weaken', '--weaken-symbol' and '--weaken-symbols' options
    supported by objcopy now make undefined symbols weak on targets that
    support weak symbols. 
  * Readelf and objdump can now display and use the contents of .debug_sup
    sections.
  * Readelf and objdump will now follow links to separate debug info
    files by default.  This behaviour can be stopped via the use of the
    new '-wN' or '--debug-dump=no-follow-links' options for readelf and
    the '-WN' or '--dwarf=no-follow-links' options for objdump.  Also
    the old behaviour can be restored by the use of the
    '--enable-follow-debug-links=no' configure time option.

The semantics of the =follow-links option have also been slightly
    changed.  When enabled, the option allows for the loading of symbol
    tables and string tables from the separate files which can be used
    to enhance the information displayed when dumping other sections,
    but it does not automatically imply that information from the
    separate files should be displayed.

If other debug section display options are also enabled (eg
    '--debug-dump=info') then the contents of matching sections in both
    the main file and the separate debuginfo file *will* be displayed.
    This is because in most cases the debug section will only be present
    in one of the files.

If however non-debug section display options are enabled (eg
    '--sections') then the contents of matching parts of the separate
    debuginfo file will *not* be displayed.  This is because in most
    cases the user probably only wanted to load the symbol information
    from the separate debuginfo file.  In order to change this behaviour
    a new command line option --process-links can be used.  This will
    allow di0pslay options to applied to both the main file and any
    separate debuginfo files.
  * Nm has a new command line option: '--quiet'.  This suppresses "no
    symbols" diagnostic.
- Includes fixes for these CVEs:
  bnc#1181452 aka CVE-2021-20197 aka PR26945
  bnc#1183511 aka CVE-2021-20284 aka PR26931
  bnc#1184620 aka CVE-2021-3487 aka PR26946
  bnc#1184794 aka CVE-2020-35448 aka PR26574
- Rebased patches: binutils-build-as-needed.diff, binutils-fix-abierrormsg.diff,
  binutils-fix-invalid-op-errata.diff, binutils-fix-relax.diff,
  binutils-revert-nm-symversion.diff, binutils-revert-plt32-in-branches.diff
- Removed patches (are in upstream): ppc-ensure-undef-dynamic-weak-undefined.patch and
  ppc-use-local-plt.patch.
- Add binutils-2.37-branch.diff.gz.

-------------------------------------------------------------------
Fri May  7 15:34:22 UTC 2021 - Andreas Schwab <schwab@suse.de>

- ppc-ensure-undef-dynamic-weak-undefined.patch: PPC: ensure_undef_dynamic
  on weak undef only in plt
- ppc-use-local-plt.patch: PowerPC use_local_plt (prerequisite for above
  patch)

-------------------------------------------------------------------
Fri Mar 26 10:06:58 UTC 2021 - Martin Liška <mliska@suse.cz>

- Update 2.36 branch diff which fixes PR27587.

-------------------------------------------------------------------
Wed Mar  3 12:53:27 UTC 2021 - Martin Liška <mliska@suse.cz>

- Do not run make TARGET-bfd=headers separately.

-------------------------------------------------------------------
Mon Mar  1 09:01:59 UTC 2021 - Martin Liška <mliska@suse.cz>

- Bump 2.36 branch diff (includes fix for PR27441 aka bsc#1182252).

-------------------------------------------------------------------
Thu Feb  4 08:40:53 UTC 2021 - Martin Liška <mliska@suse.cz>

- Bump 2.36 branch diff.

-------------------------------------------------------------------
Wed Feb  3 08:39:37 UTC 2021 - Martin Liška <mliska@suse.cz>

- Update 2.36 branch diff which should fix PR27311 completely.
  It fixes also PR27284.
- Remove temporary fix 0001-PR27311-ld.bfd-symbol-from-plugin-undefined-referenc.patch.

-------------------------------------------------------------------
Tue Feb  2 13:07:22 UTC 2021 - Martin Liška <mliska@suse.cz>

- Add temporary upstream fix for PR27311
  0001-PR27311-ld.bfd-symbol-from-plugin-undefined-referenc.patch.

-------------------------------------------------------------------
Sun Jan 24 16:56:39 UTC 2021 - Martin Liška <mliska@suse.cz>

- Update to binutils 2.36:
   New features in the Assembler:
    General:
     * When setting the link order attribute of ELF sections, it is now
       possible to use a numeric section index instead of symbol name.
     * Added a .nop directive to generate a single no-op instruction in
       a target neutral manner.  This instruction does have an effect on
       DWARF line number generation, if that is active.
     * Removed --reduce-memory-overheads and --hash-size as gas now
       uses hash tables that can be expand and shrink automatically.
     X86/x86_64:
       * Add support for AVX VNNI, HRESET, UINTR, TDX, AMX and Key
         Locker instructions. 
       * Support non-absolute segment values for lcall and ljmp.
       * Add {disp16} pseudo prefix to x86 assembler.
       * Configure with --enable-x86-used-note by default for Linux/x86.
     ARM/AArch64:
       * Add support for Cortex-A78, Cortex-A78AE and Cortex-X1,
         Cortex-R82, Neoverse V1, and Neoverse N2 cores.
       * Add support for ETMv4 (Embedded Trace Macrocell), ETE (Embedded
         Trace Extension), TRBE (Trace Buffer Extension), CSRE (Call
         Stack Recorder Extension) and BRBE (Branch Record Buffer
         Extension) system registers.
       * Add support for Armv8-R and Armv8.7-A ISA extensions.
       * Add support for DSB memory nXS barrier, WFET and WFIT
         instruction for Armv8.7.
       * Add support for +csre feature for -march. Add CSR PDEC
         instruction for CSRE feature in AArch64.
       * Add support for +flagm feature for -march in Armv8.4 AArch64.
       * Add support for +ls64 feature for -march in Armv8.7
         AArch64. Add atomic 64-byte load/store instructions for this
         feature. 
       * Add support for +pauth (Pointer Authentication) feature for
         -march in AArch64.
    New features in the Linker:
      * Add --error-handling-script=<NAME> command line option to allow
        a helper script to be invoked when an undefined symbol or a
        missing library is encountered.  This option can be suppressed
        via the configure time switch: --enable-error-handling-script=no.
      * Add -z x86-64-{baseline|v[234]} to the x86 ELF linker to mark
        x86-64-{baseline|v[234]} ISA level as needed.
      * Add -z unique-symbol to avoid duplicated local symbol names.
      * The creation of PE format DLLs now defaults to using a more
        secure set of DLL characteristics.
      * The linker now deduplicates the types in .ctf sections.  The new 
         command-line option --ctf-share-types describes how to do this:
         its default value, share-unconflicted, produces the most compact
         output.
      * The linker now omits the "variable section" from .ctf sections
        by default, saving space.  This is almost certainly what you
        want unless you are working on a project that has its own
        analogue of symbol tables that are not reflected in the ELF
        symtabs.
  New features in other binary tools:
      * The ar tool's previously unused l modifier is now used for
        specifying dependencies of a static library. The arguments of
        this option (or --record-libdeps long form option) will be
        stored verbatim in the __.LIBDEP member of the archive, which
        the linker may read at link time.
      * Readelf can now display the contents of LTO symbol table
        sections when asked to do so via the --lto-syms command line
        option.
      * Readelf now accepts the -C command line option to enable the
        demangling of symbol names.  In addition the --demangle=<style>,
        --no-demangle, --recurse-limit and --no-recurse-limit options
        are also now availale.
- Includes fixes for these CVEs:
  bnc#1179898 aka CVE-2020-16590 aka PR25821
  bnc#1179899 aka CVE-2020-16591 aka PR25822
  bnc#1179900 aka CVE-2020-16592 aka PR25823
  bnc#1179901 aka CVE-2020-16593 aka PR25827
  bnc#1179902 aka CVE-2020-16598 aka PR25840
  bnc#1179903 aka CVE-2020-16599 aka PR25842
  bnc#1180451 aka CVE-2020-35493 aka PR25307
  bnc#1180454 aka CVE-2020-35496 aka PR25308
  bnc#1180461 aka CVE-2020-35507 aka PR25308
- Rebase the following patches:
 * binutils-fix-relax.diff
 * binutils-revert-nm-symversion.diff
 * binutils-revert-plt32-in-branches.diff
- Add missing dependency on bc (ld.gold testsuite uses it).
- Use --enable-obsolete for cross builds as ia64 is deprecated now.
- Add binutils-2.36-branch.diff.gz.

-------------------------------------------------------------------
Fri Dec  4 14:52:54 UTC 2020 - Michael Matz <matz@suse.com>

- Add binutils-fix-relax.diff to fix linking relaxation problems
  with old object files hitting some enterprise software. [bsc#1179341]

-------------------------------------------------------------------
Mon Nov 23 13:58:56 UTC 2020 - Michael Matz <matz@suse.com>

- Update binutils-2.35-branch.diff.gz to commit 1c5243df:
  * Fixes PR26520, aka [bsc#1179036], a problem in addr2line with
    certain DWARF variable descriptions.
  * Also fixes PR26711, PR26656, PR26655, PR26929, PR26808, PR25878,
    PR26740, PR26778, PR26763, PR26685, PR26699, PR26902, PR26869,
    PR26711 
  * The above includes fixes for dwo files produced by modern dwp,
    fixing several problems in the DWARF reader.

-------------------------------------------------------------------
Mon Oct 12 11:51:06 UTC 2020 - Stefan Brüns <stefan.bruens@rwth-aachen.de>

- Reapply spec file cleanup from format_spec_file
- Remove a SLE10 version check

-------------------------------------------------------------------
Mon Sep 21 07:55:30 UTC 2020 - Martin Liška <mliska@suse.cz>

- Update to 2.35.1 and rebased branch diff:
  * This is a point release over the previous 2.35 version, containing bug
  fixes, and as an exception to the usual rule, one new feature.  The
  new feature is the support for a new directive in the assembler:
  ".nop".  This directive creates a single no-op instruction in whatever
  encoding is correct for the target architecture.  Unlike the .space or
  .fill this is a real instruction, and it does affect the generation of
  DWARF line number tables, should they be enabled.

-------------------------------------------------------------------
Tue Sep 15 12:14:55 UTC 2020 - matz@suse.com

- Update binutils-2.35-branch.diff.gz to commit 23f268a0:
  * Add xBPF target
  * Fix various problems with DWARF 5 support in gas
- Toolchain module update for SLE15 [jsc#ECO-2373]
- Includes changes that were SLE-only in binutils-add-z15-name.diff
  for [bsc#1160590, jsc#SLE-7903 aka jsc#SLE-7464]
- Amend binutils-revert-plt32-in-branches.diff to adjust also new
  testcases.

-------------------------------------------------------------------
Sat Aug 15 08:42:59 UTC 2020 - Martin Liška <mliska@suse.cz>

- Add binutils-2.35-branch.diff.gz: it includes fix for
  nm -B for objects compiled with -flto and -fcommon.

-------------------------------------------------------------------
Fri Aug  7 14:46:35 UTC 2020 - matz@suse.com

- Add binutils-revert-nm-symversion.diff to be compatible with old
  output of nm relied on in scripts.
- Add binutils-fix-abierrormsg.diff to work around an eager (new)
  error message occuring without inputs and as-needed (affects
  nvme-cli build).

-------------------------------------------------------------------
Fri Jul 24 14:25:31 UTC 2020 - Martin Liška <mliska@suse.cz>

- Update to binutils 2.35:
  * The asseembler can now produce DWARF-5 format line number tables.
  * Readelf now has a "lint" mode to enable extra checks of the files it is processing.
  * Readelf will now display "[...]" when it has to truncate a symbol name.  
    The old behaviour - of displaying as many characters as possible, up to
    the 80 column limit - can be restored by the use of the --silent-truncation
    option.
  * The linker can now produce a dependency file listing the inputs that it
    has processed, much like the -M -MP option supported by the compiler.

- Regenerate add-ulp-section.diff with -p1 due to a fuzzing issue.
- Remove binutils-2.34-branch.diff.gz.
- Regenerate binutils-build-as-needed.diff due to a fuzzing issue.
- Regenerate binutils-fix-invalid-op-errata.diff as one hunk was upstreamed.
- Remove upstreamed patch binutils-pr25593.diff.
- Regenerate unit-at-a-time.patch due to a fuzzing issue.
- Regenerate binutils-revert-plt32-in-branches.diff.

-------------------------------------------------------------------
Wed Mar 25 14:12:50 UTC 2020 - Martin Liška <mliska@suse.cz>

- Update binutils-2.34-branch.diff.gz.

-------------------------------------------------------------------
Fri Feb 28 16:20:14 UTC 2020 - Martin Liška <mliska@suse.cz>

- Remove fix-try_load_plugin.patch as it is part
  of the updated binutils-2.34-branch.diff.gz patch.

-------------------------------------------------------------------
Wed Feb 26 08:13:33 UTC 2020 - Richard Biener <rguenther@suse.com>

- Add binutils-pr25593.diff to fix DT_NEEDED order with -flto
  [bsc#1163744]

-------------------------------------------------------------------
Tue Feb 18 16:12:52 UTC 2020 - Martin Liška <mliska@suse.cz>

- Update fix-try_load_plugin.patch to latest version.

-------------------------------------------------------------------
Tue Feb 18 12:48:26 UTC 2020 - Martin Liška <mliska@suse.cz>

- Add fix-try_load_plugin.patch in order to fix fallback caused
  by backport for PR25355.

-------------------------------------------------------------------
Sat Feb  1 17:46:57 UTC 2020 - Martin Liška <mliska@suse.cz>

- Update to binutils 2.34:
  * The disassembler (objdump --disassemble) now has an option to
    generate ascii art thats show the arcs between that start and end
    points of control flow instructions.

* The binutils tools now have support for debuginfod.  Debuginfod is a 
    HTTP service for distributing ELF/DWARF debugging information as
    well as source code.  The tools can now connect to debuginfod
    servers in order to download debug information about the files that
    they are processing.

* The assembler and linker now support the generation of ELF format
    files for the Z80 architecture.
- Rename and get binutils-2.34-branch.diff.gz (boo#1160254).
- Rebase add-ulp-section.diff, binutils-revert-plt32-in-branches.diff,
  cross-avr-size.patch and binutils-skip-rpaths.patch.
- Add new subpackages for libctf and libctf-nobfd.
- Disable LTO due to boo#1163333.
- Includes fixes for these CVEs:
  bnc#1153768 aka CVE-2019-17451 aka PR25070
  bnc#1153770 aka CVE-2019-17450 aka PR25078

-------------------------------------------------------------------
Tue Jan  7 12:42:34 UTC 2020 - Andreas Schwab <schwab@suse.de>

- Disable LTO during testsuite run

-------------------------------------------------------------------
Wed Nov 20 16:22:51 UTC 2019 - matz@suse.com

- Add binutils-fix-invalid-op-errata.diff to fix various
  build fails on aarch64 (PR25210, bsc#1157755).

-------------------------------------------------------------------
Mon Nov 18 17:06:15 UTC 2019 - matz@suse.com

- Add add-ulp-section.diff for user space live patching.

-------------------------------------------------------------------
Tue Oct 22 13:45:51 UTC 2019 - Martin Liška <mliska@suse.cz>

- Update to binutils 2.33.1:
  * Adds support for the Arm Scalable Vector Extension version 2
    (SVE2) instructions, the Arm Transactional Memory Extension (TME)
    instructions and the Armv8.1-M Mainline and M-profile Vector
    Extension (MVE) instructions.
  * Adds support for the Arm Cortex-A76AE, Cortex-A77 and Cortex-M35P
    processors and the AArch64 Cortex-A34, Cortex-A65, Cortex-A65AE,
    Cortex-A76AE, and Cortex-A77 processors.
  * Adds a .float16 directive for both Arm and AArch64 to allow
    encoding of 16-bit floating point literals.
  * For MIPS, Add -m[no-]fix-loongson3-llsc option to fix (or not)
    Loongson3 LLSC Errata.  Add a --enable-mips-fix-loongson3-llsc=[yes|no]
    configure time option to set the default behavior. Set the default
    if the configure option is not used to "no".
  * The Cortex-A53 Erratum 843419 workaround now supports a choice of
    which workaround to use.  The option --fix-cortex-a53-843419 now
    takes an optional argument --fix-cortex-a53-843419[=full|adr|adrp]
    which can be used to force a particular workaround to be used.
    See --help for AArch64 for more details.
  * Add support for GNU_PROPERTY_AARCH64_FEATURE_1_BTI and
    GNU_PROPERTY_AARCH64_FEATURE_1_PAC  in ELF GNU program properties
    in the AArch64 ELF linker. 
  * Add -z force-bti for AArch64 to enable GNU_PROPERTY_AARCH64_FEATURE_1_BTI
    on output while warning about missing GNU_PROPERTY_AARCH64_FEATURE_1_BTI 
    on inputs and use PLTs protected with BTI.
  * Add -z pac-plt for AArch64 to pick PAC enabled PLTs.
  * Add --source-comment[=<txt>] option to objdump which if present,
    provides a prefix to source code lines displayed in a disassembly.
  * Add --set-section-alignment <section-name>=<power-of-2-align>
    option to objcopy to allow the changing of section alignments.
  * Add --verilog-data-width option to objcopy for verilog targets to
    control width of data elements in verilog hex format.
  * The separate debug info file options of readelf (--debug-dump=links
    and --debug-dump=follow) and objdump (--dwarf=links and
    --dwarf=follow-links) will now display and/or follow multiple
    links if more than one are present in a file.  (This usually
    happens when gcc's -gsplit-dwarf option is used).
    In addition objdump's --dwarf=follow-links now also affects its
    other display options, so that for example, when combined with
    --syms it will cause the symbol tables in any linked debug info
    files to also be displayed.  In addition when combined with
    --disassemble the --dwarf= follow-links option will ensure that
    any symbol tables in the linked files are read and used when
    disassembling code in the main file.
  * Add support for dumping types encoded in the Compact Type Format
    to objdump and readelf.
- Includes fixes for these CVEs:
  bnc#1126826 aka CVE-2019-9077 aka PR1126826
  bnc#1126829 aka CVE-2019-9075 aka PR1126829
  bnc#1126831 aka CVE-2019-9074 aka PR24235
  bnc#1140126 aka CVE-2019-12972 aka PR23405
  bnc#1143609 aka CVE-2019-14444 aka PR24829
  bnc#1142649 aka CVE-2019-14250 aka PR90924
- Remove patches that are now included in the release:
  binutils-2.32-branch.diff.gz, binutils-fix-ld-segv.diff,
  binutils-pr24486.patch, riscv-abi-check.patch,
  rx-gas-padding-pr24464.patch.
- Add binutils-2.33-branch.diff.gz patch.
- Rebase binutils-revert-plt32-in-branches.diff and
  cross-avr-size.patch patch.

-------------------------------------------------------------------
Tue Oct 15 14:05:57 UTC 2019 - matz@suse.com

- Add binutils-fix-ld-segv.diff to fix a segfault in ld
  when building some versions of pacemaker.  [bsc#1154025,
  bsc#1154016]

-------------------------------------------------------------------
Wed Oct  2 12:20:41 UTC 2019 - matz@suse.com

- Add avr, epiphany and rx to target_list so that the common
  binutils can handle all objects we can create with crosses.
  [bsc#1152590]

-------------------------------------------------------------------
Mon Sep  9 17:19:56 UTC 2019 - matz@suse.com

- Update to current 2.32 branch @7b468db3 adding
  binutils-2.32-branch.diff.gz [jsc#ECO-368].
- Includes fixes for these CVEs:
  bsc#1109412 aka CVE-2018-17358 aka PR23686 
  bsc#1109413 aka CVE-2018-17359 aka PR23686 
  bsc#1109414 aka CVE-2018-17360 aka PR23685 
  bsc#1111996 aka CVE-2018-18309 aka PR23770 
  bsc#1112534 aka CVE-2018-18484 aka GCC PR87636
  bsc#1112535 aka CVE-2018-18483 aka PR23767
  bsc#1113247 aka CVE-2018-18607 aka PR23805 
  bsc#1113252 aka CVE-2018-18606 aka PR23806 
  bsc#1113255 aka CVE-2018-18605 aka PR23804 
  bsc#1116827 aka CVE-2018-17985 aka GCC PR87335 
  bsc#1118830 aka CVE-2018-19932 aka PR23932 
  bsc#1118831 aka CVE-2018-19931 aka PR23942 
  bsc#1120640 aka CVE-2018-1000876 aka PR23994
  bsc#1121034 aka CVE-2018-20651 aka PR24041
  bsc#1121035 aka CVE-2018-20623 aka PR24049 
  bsc#1121056 aka CVE-2018-20671 aka PR24005
  bsc#1142772 aka CVE-2019-1010180 aka PR23657
- Refresh s390-biarch.diff and
  binutils-revert-plt32-in-branches.diff .
- For the SLE12 package this also removes patches
  binutils-z13-1.diff, binutils-z13-2.diff,
  binutils-z13-3.diff, binutils-z13-4.diff and binutils-z13-5.diff .

-------------------------------------------------------------------
Sat Aug 31 14:50:57 UTC 2019 - Dirk Mueller <dmueller@suse.com>

- enable xtensa architecture (Tensilica lc6 and related)
- Fix SUSE typo in README package name

-------------------------------------------------------------------
Mon Jul 22 10:41:14 UTC 2019 - Martin Liška <mliska@suse.cz>

- Use -ffat-lto-objects in order to provide assembly for static libs
  (boo#1141913).

-------------------------------------------------------------------
Mon Jun  3 14:20:07 UTC 2019 - matz@suse.com

Fake entry for SLE12 package variant only:
- Add support for new z13 instructions. [fate#327074, jsc#SLE-6206,
  bsc#1137271]
  Adds patches binutils-z13-1.diff, binutils-z13-2.diff,
  binutils-z13-3.diff, binutils-z13-4.diff and binutils-z13-5.diff .

-------------------------------------------------------------------
Mon Apr 29 11:10:11 UTC 2019 - Martin Liška <mliska@suse.cz>

- Add binutils-pr24486.patch: fix for PR24486 (boo#1133131 boo#1133232).

-------------------------------------------------------------------
Tue Apr 23 07:46:10 UTC 2019 - Martin Liška <mliska@suse.cz>

- Add rx-gas-padding-pr24464.patch: fix for PR24464.

-------------------------------------------------------------------
Wed Apr  3 14:00:22 UTC 2019 - Andreas Schwab <schwab@suse.de>

- riscv-abi-check.patch: Don't check ABI flags if no code section

-------------------------------------------------------------------
Tue Feb 19 10:47:00 UTC 2019 - Martin Liška <mliska@suse.cz>

- Add binutils.keyring and verify signature.

-------------------------------------------------------------------
Tue Feb  5 09:17:34 UTC 2019 - Martin Liška <mliska@suse.cz>

- Add disk and RAM (for ppc, ppc64 and ppc64le) constraint with _constraints.

-------------------------------------------------------------------
Mon Feb  4 14:04:40 UTC 2019 - Martin Liška <mliska@suse.cz>

- Update to binutils 2.32:
    * The binutils now support for the C-SKY processor series.
    * The x86 assembler now supports a -mvexwig=[0|1] option to control
      encoding of VEX.W-ignored (WIG) VEX instructions.
      It also has a new -mx86-used-note=[yes|no] option to generate (or
      not) x86 GNU property notes.  
    * The MIPS assembler now supports the Loongson EXTensions R2 (EXT2),
      the Loongson EXTensions (EXT) instructions, the Loongson Content
      Address Memory (CAM) ASE and the Loongson MultiMedia extensions
      Instructions (MMI) ASE.
    * The addr2line, c++filt, nm and objdump tools now have a default
      limit on the maximum amount of recursion that is allowed whilst
      demangling strings.  This limit can be disabled if necessary.
    * Objdump's --disassemble option can now take a parameter,
      specifying the starting symbol for disassembly.  Disassembly will
      continue from this symbol up to the next symbol or the end of the
      function.
    * The BFD linker will now report property change in linker map file
      when merging GNU properties.
    * The BFD linker's -t option now doesn't report members within
      archives, unless -t is given twice.  This makes it more useful
      when generating a list of files that should be packaged for a
      linker bug report.
    * The GOLD linker has improved warning messages for relocations that
      refer to discarded sections.
- Remove binutils-2.31-branch.diff.gz, fix-pr23919-1.diff,
  fix-pr23919-2.diff, fix-pr23919-3.diff,
  gold-depend-on-opcodes.diff and s390-relro.diff.
- Refresh binutils-skip-rpaths.patch, s390-biarch.diff, cross-avr-size.patch
  and binutils-revert-plt32-in-branches.diff.

-------------------------------------------------------------------
Thu Jan 24 14:10:56 UTC 2019 - matz@suse.com

- Add s390-relro.diff to improve relro support on s390
  [fate#326356]

-------------------------------------------------------------------
Thu Dec  6 13:53:51 UTC 2018 - matz@suse.com

- Fix the fix for PR23919 [bsc#1118644]:
  rename handle-ELF-compressed-header-alignment-correctly-by-.patch
  to fix-pr23919-1.diff and add fix-pr23919-2.diff
  and fix-pr23919-3.diff .

-------------------------------------------------------------------
Tue Nov 27 12:43:42 UTC 2018 - Martin Liška <mliska@suse.cz>

- Add handle-ELF-compressed-header-alignment-correctly-by-.patch:
  PR23919.

-------------------------------------------------------------------
Tue Aug 28 14:07:15 UTC 2018 - matz@suse.com

- Update to binutils-2_31-branch @e51abf7e3, minor bugfixes in
  the support for the X86_ISA_1_* notes.  Adds
  patch binutils-2.31-branch.diff.gz .
- Add binutils-revert-plt32-in-branches.diff on anything older
  than Tumbleweed to not break old tools not expecting
  PLT32 instead of PC32 relocs on x86_64.
- Includes fixes for these CVEs:
  * from 2.30:
    bnc#1065643 aka CVE-2017-15996 aka PR22361
    bnc#1065689 aka CVE-2017-15939 aka PR22205
    bnc#1065693 aka CVE-2017-15938 aka PR22209
    bnc#1068640 aka CVE-2017-16826 aka PR22376
    bnc#1068643 aka CVE-2017-16832 aka PR22373
    bnc#1068887 aka CVE-2017-16831 aka PR22385
    bnc#1068888 aka CVE-2017-16830 aka PR22384
    bnc#1068950 aka CVE-2017-16829 aka PR22307
    bnc#1069176 aka CVE-2017-16828 aka PR22386
    bnc#1069202 aka CVE-2017-16827 aka PR22306
  * from 2.31:
    bnc#1077745 aka CVE-2018-6323  aka PR22746
    bnc#1079103 aka CVE-2018-6543  aka PR22769
    bnc#1079741 aka CVE-2018-6759  aka PR22794
    bnc#1080556 aka CVE-2018-6872  aka PR22788
    bnc#1081527 aka CVE-2018-7208  aka PR22741
    bnc#1083528 aka CVE-2018-7570  aka PR22881
    bnc#1083532 aka CVE-2018-7569  aka PR22895
    bnc#1086608 aka CVE-2018-8945  aka PR22809
    bnc#1086784 aka CVE-2018-7643  aka PR22905
    bnc#1086786 aka CVE-2018-7642  aka PR22887
    bnc#1086788 aka CVE-2018-7568  aka PR22894
    bnc#1090997 aka CVE-2018-10373 aka PR23065
    bnc#1091015 aka CVE-2018-10372 aka PR23064
    bnc#1091365 aka CVE-2018-10535 aka PR23113
    bnc#1091368 aka CVE-2018-10534 aka PR23110
- Removes binutils-fix-pr21964.diff as it's included in 2.31.
  Rebase testsuite.diff and aarch64-common-pagesize.patch .

-------------------------------------------------------------------
Tue Jul 31 11:45:27 UTC 2018 - rguenther@suse.com

- Disable -z separate-code everywhere but in Tumbleweed.

-------------------------------------------------------------------
Mon Jul 16 07:55:51 UTC 2018 - rguenther@suse.com

- Update to binutils 2.31
  * The AArch64 port now supports showing disassembly notes which are emitted
    when inconsistencies are found with the instruction that may result in the
    instruction being invalid.  These can be turned on with the option -M notes
    to objdump.
  * The AArch64 port now emits warnings when a combination of an instruction and
    a named register could be invalid.
  * Added O modifier to ar to display member offsets inside an archive
  * The ADR and ADRL pseudo-instructions supported by the ARM assembler
    now only set the bottom bit of the address of thumb function symbols
    if the -mthumb-interwork command line option is active.
  * Add --generate-missing-build-notes=[yes|no] option to create (or not) GNU
    Build Attribute notes if none are present in the input sources.  Add a
    --enable-generate-build-notes=[yes|no] configure time option to set the
    default behaviour.  Set the default if the configure option is not used
    to "no".
  * Remove -mold-gcc command-line option for x86 targets.
  * Add -O[2|s] command-line options to x86 assembler to enable alternate
    shorter instruction encoding.
  * Add support for .nops directive.  It is currently supported only for
    x86 targets.
  * Speed up direct linking with DLLs for Cygwin and Mingw targets.
  * Add a configure option --enable-separate-code to decide whether
    -z separate-code should be enabled in ELF linker by default.  Default
    to yes for Linux/x86 targets.  Note that -z separate-code can increase
    disk and memory size.
  * Includes riscv-relax-size.patch, riscv-relax-relocatable.patch,
    riscv-relax-versioned-hidden.patch and riscv-wrap-relax.patch
- Refresh enable-targets-gold.diff.
- Adjust cross-avr-omit_section_dynsym.patch.
- Remove binutils-2.30-branch.diff.

-------------------------------------------------------------------
Mon Jun  4 09:49:37 UTC 2018 - schwab@suse.de

- riscv-relax-versioned-hidden.patch: RISC-V: Fix symbol address problem
  with versioned symbols (PR ld/22756)

-------------------------------------------------------------------
Sat May 12 20:57:32 UTC 2018 - afaerber@suse.de

- Restore riscv64-elf cross prefix via symlinks

-------------------------------------------------------------------
Tue Apr  3 14:56:44 UTC 2018 - matz@suse.com

- Fix pacemaker libqb problem with section start/stop
  symbols, aka PR21964.  [bnc#1075418]
  Adds binutils-fix-pr21964.diff .
(this is a change from SLE12, that was already included in 2.31
binutils tree, mentioned for completeness to not loose tracking)

-------------------------------------------------------------------
Thu Mar 22 17:11:45 UTC 2018 - schwab@suse.de

- riscv-relax-relocatable.patch: RISC-V: Don't enable relaxation in
  relocatable link

-------------------------------------------------------------------
Tue Mar 20 11:26:23 UTC 2018 - rguenther@suse.com

- Update binutils-2.30-branch.diff: 2.30 branch @7c78c26eefbb8
  * Includes more complete fix for PR20882.
  * Includes fix for PR22836.  [boo#1085784]
  * Includes fix for PR22983.

-------------------------------------------------------------------
Thu Mar  8 11:33:31 UTC 2018 - schwab@suse.de

- riscv-relax-size.patch: Fix symbol size bug when relaxation deletes bytes

-------------------------------------------------------------------
Tue Mar  6 16:01:24 UTC 2018 - matz@suse.com

- Add binutils-pr22868.diff to fix testsuite fails in LLVM.

-------------------------------------------------------------------
Mon Feb 26 11:03:07 UTC 2018 - schwab@suse.de

- Update to binutils 2.30
  * Add --debug-dump=links option to readelf and --dwarf=links option to objdump
    which displays the contents of any .gnu_debuglink or .gnu_debugaltlink
    sections.
    Add a --debug-dump=follow-links option to readelf and a --dwarf=follow-links
    option to objdump which causes indirect links into separate debug info files
    to be followed when dumping other DWARF sections.
  * Add support for loaction views in DWARF debug line information.
  * Add -z separate-code to generate separate code PT_LOAD segment.
  * Add "-z undefs" command line option as the inverse of the "-z defs" option.
  * Add -z globalaudit command line option to force audit libraries to be run
    for every dynamic object loaded by an executable - provided that the loader
    supports this functionality.
  * Tighten linker script grammar around file name specifiers to prevent the use
    of SORT_BY_ALIGNMENT and SORT_BY_INIT_PRIORITY on filenames.  These would
    previously be accepted but had no effect.
  * The EXCLUDE_FILE directive can now be placed within any SORT_* directive
    within input section lists.
- binutils-2.30-branch.diff: 2.30 branch @4cd0043413
- riscv-wrap-relax.patch: Fix linker relaxation with --wrap
- Remove use-hashtype-both-by-default.diff, use
  --enable-default-hash-style=both instead
- Remove binutils-2.29-branch.diff, s390x-8fe09d7.diff
- Use riscv64-suse-linux as target for cross-riscv64-binutils

-------------------------------------------------------------------
Fri Jan 26 13:40:13 UTC 2018 - dimstar@opensuse.org

- Drop bc BuildRequires: no longer needed.

-------------------------------------------------------------------
Mon Jan 22 09:40:25 UTC 2018 - schwab@suse.de

- Add riscv64 to %target_list

-------------------------------------------------------------------
Wed Jan 17 11:28:03 UTC 2018 - afaerber@suse.de

- Add arm-none-eabi symlinks (bsc#1074741)

-------------------------------------------------------------------
Mon Oct  2 19:29:22 UTC 2017 - matz@suse.com

- Add s390x-8fe09d7.diff to fix typo in ELF notes.

-------------------------------------------------------------------
Fri Sep 29 08:26:45 UTC 2017 - mliska@suse.cz

- Update binutils-2.29-branch.diff to @a45d8fd5ffbf888 fixing PR 22220.

-------------------------------------------------------------------
Thu Sep 28 08:26:12 UTC 2017 - rguenther@suse.com

- Update to 2.29.1 release, accumulating bugfixes.
- Update binutils-2.29-branch.diff to @a38a1d80 and to be
  relative to the 2.29.1 release fixing following PRs/bnc/CVE:
  22058 [bnc#1057149, CVE-2017-14130]
  21813 [bnc#1052503, CVE-2017-12456, bnc#1052507, CVE-2017-12454,
         bnc#1052509, CVE-2017-12453, bnc#1052511, CVE-2017-12452,
         bnc#1052514, CVE-2017-12450, bnc#1052503, CVE-2017-12456,
         bnc#1052507, CVE-2017-12454, bnc#1052509, CVE-2017-12453,
         bnc#1052511, CVE-2017-12452, bnc#1052514, CVE-2017-12450]
  22148 [bnc#1060599, CVE-2017-14745]
  22163 [bnc#1061241, CVE-2017-14974]
  21933 [bnc#1053347, CVE-2017-12799]
  21787 [bnc#1052518, CVE-2017-12448]
  22018 [bnc#1056312, CVE-2017-13757]
  22170 [bnc#1060621, CVE-2017-14729]
  22047 [bnc#1057144, CVE-2017-14129]
  22059 [bnc#1057139, CVE-2017-14128]
  21990 [bnc#1058480, CVE-2017-14333]
  22113 [bnc#1059050, CVE-2017-14529]
  as well as these PRs:
  22061, 21786, 21916, 21994, 22064, 21995, 21909, 21441, 22060,
  22067, 22032, 21820, 22048, 22199, 21781, 21824, 21861, 22150.

-------------------------------------------------------------------
Wed Aug 30 13:04:20 UTC 2017 - matz@suse.com

- Update to 2.29 (@5d25156), upstream fix for PR21884, as
  well as PRs 18808 18841 21840 21988 21910 21962 21964.

-------------------------------------------------------------------
Fri Aug 11 14:00:02 UTC 2017 - matz@suse.com

- Last fixes for PR21884 weren't complete, adjust
  binutils-2.29-branch.diff some more for this.

-------------------------------------------------------------------
Thu Aug 10 14:49:16 UTC 2017 - matz@suse.com

- Update to 2.29 branch (@de44148c), fixing PR21884, a segfault
  in ld while building memtest86+ .
  Changes binutils-2.29-branch.diff.

-------------------------------------------------------------------
Mon Jul 31 17:12:31 UTC 2017 - matz@suse.com

- Update to 2.29 branch, fixing PR21847, affecting the ppc64le
  ABI in corner cases since 2.29 release.
  Adds binutils-2.29-branch.diff.
- Remove binutils-2.29-gold-mips.patch, obsolete by the update.

-------------------------------------------------------------------
Wed Jul 26 10:53:13 UTC 2017 - rguenther@suse.com

- Add binutils-2.29-gold-mips.patch to fix build on SLE-11.

-------------------------------------------------------------------
Wed Jul 26 08:05:04 UTC 2017 - rguenther@suse.com

- Update to binutils 2.29. [fate#321454, fate#321494, fate#323293]
- Fixes these security-related PRs/bnc/CVEs:
  18750 [bsc#1030296, CVE-2014-9939]
  20891 [bsc#1030585, CVE-2017-7225]
  20892 [bsc#1030588, CVE-2017-7224]
  20898 [bsc#1030589, CVE-2017-7223]
  20905 [bsc#1030584, CVE-2017-7226]
  20908 [bsc#1031644, CVE-2017-7299]
  20909 [bsc#1031656, CVE-2017-7300]
  20921 [bsc#1031595, CVE-2017-7302]
  20922 [bsc#1031593, CVE-2017-7303]
  20924 [bsc#1031638, CVE-2017-7301]
  20931 [bsc#1031590, CVE-2017-7304]
  21409 [bsc#1037052, CVE-2017-8392]
  21412 [bsc#1037057, CVE-2017-8393]
  21414 [bsc#1037061, CVE-2017-8394]
  21432 [bsc#1037066, CVE-2017-8396]
  21440 [bsc#1037273, CVE-2017-8421]
  21580 [bsc#1044891, CVE-2017-9746]
  21581 [bsc#1044897, CVE-2017-9747]
  21582 [bsc#1044901, CVE-2017-9748]
  21587 [bsc#1044909, CVE-2017-9750]
  21594 [bsc#1044925, CVE-2017-9755]
  21595 [bsc#1044927, CVE-2017-9756]
- Feature changes:
  * The MIPS port now supports microMIPS eXtended Physical Addressing (XPA)
    instructions for assembly and disassembly.
  * The MIPS port now supports the microMIPS Release 5 ISA for assembly and
    disassembly.
  * The MIPS port now supports the Imagination interAptiv MR2 processor,
    which implements the MIPS32r3 ISA, the MIPS16e2 ASE as well as a couple
    of implementation-specific regular MIPS and MIPS16e2 ASE instructions.
  * The SPARC port now supports the SPARC M8 processor, which implements the
    Oracle SPARC Architecture 2017.
  * The MIPS port now supports the MIPS16e2 ASE for assembly and disassembly.
  * Add support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX.
  * Add support for the wasm32 ELF conversion of the WebAssembly file format.
  * Add --inlines option to objdump, which extends the --line-numbers option
    so that inlined functions will display their nesting information.
  * Add --merge-notes options to objcopy to reduce the size of notes in
    a binary file by merging and deleting redundant notes.
  * Add support for locating separate debug info files using the build-id
    method, where the separate file has a name based upon the build-id of
    the original file.
  GAS
  * Add support for ELF SHF_GNU_MBIND.
  * Add support for the WebAssembly file format and wasm32 ELF conversion.
  * PowerPC gas now checks that the correct register class is used in
    instructions.  For instance, "addi %f4,%cr3,%r31" warns three times
    that the registers are invalid.
  * Add support for the Texas Instruments PRU processor.
  * Support for the ARMv8-R architecture and Cortex-R52 processor has been
    added to the ARM port.
  GNU ld
  * Support for -z shstk in the x86 ELF linker to generate
    GNU_PROPERTY_X86_FEATURE_1_SHSTK in ELF GNU program properties.
  * Add support for GNU_PROPERTY_X86_FEATURE_1_SHSTK in ELF GNU program
    properties in the x86 ELF linker.
  * Add support for GNU_PROPERTY_X86_FEATURE_1_IBT in ELF GNU program
    properties in the x86 ELF linker.
  * Support for -z ibtplt in the x86 ELF linker to generate IBT-enabled
    PLT.
  * Support for -z ibt in the x86 ELF linker to generate IBT-enabled
    PLT as well as GNU_PROPERTY_X86_FEATURE_1_IBT in ELF GNU program
    properties.
  * Add support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX.
  * Add support for ELF GNU program properties.
  * Add support for the Texas Instruments PRU processor.
  * When configuring for arc*-*-linux* targets the default linker emulation will
    change if --with-cpu=nps400 is used at configure time.
  * Improve assignment of LMAs to orphan sections in some edge cases where a
    mixture of both AT>LMA_REGION and AT(LMA) are used.
  * Orphan sections placed after an empty section that has an AT(LMA) will now
    take an load memory address starting from LMA.
  * Section groups can now be resolved (the group deleted and the group members
    placed like normal sections) at partial link time either using the new
    linker option --force-group-allocation or by placing FORCE_GROUP_ALLOCATION
    into the linker script.
- Includes binutils-bso21193.diff, binutils-bso21333.diff and
  fix-security-bugs.diff.
- Remove ld-dtags.diff, instead configure with --enable-new-dtags.
- Refresh binutils-build-as-needed.diff.
- Remove binutils-2.28-branch.diff.

-------------------------------------------------------------------
Wed Apr  5 11:55:17 UTC 2017 - afaerber@suse.de

- Add riscv64 target, tested with gcc7 and downstream newlib 2.4.0
* Prepare riscv32 target (gh#riscv/riscv-newlib#8)

-------------------------------------------------------------------
Fri Mar 31 10:30:08 UTC 2017 - rguenther@suse.com

- Update binutils-2.28-branch.diff.
- Make compressed debug section handling explicit, disable for
  old products and enable for gas on all architectures otherwise.
- Add binutils-bso21333.diff.  [boo#1029995]

-------------------------------------------------------------------
Thu Mar 30 11:16:18 UTC 2017 - rguenther@suse.com

- Remove empty rpath component removal optimization from
  binutils-skip-rpaths.patch to workaround CMake rpath handling.
  [boo#1025282]

-------------------------------------------------------------------
Fri Mar 17 15:28:26 UTC 2017 - matz@suse.com

- Add fix-security-bugs.diff to fix bnc#1029907, bnc#1029908,
  bnc#1029909 and more.  Upstream bugs fixed: 
  PR 21135 [bsc#1030298, CVE-2017-7209],
  PR 21137 [bsc#1029909, CVE-2017-6965],
  PR 21139 [bsc#1029908, CVE-2017-6966],
  PR 21156 [bsc#1029907, CVE-2017-6969],
  PR 21157 [bsc#1030297, CVE-2017-7210],
  PR 21147, PR 21148, PR 21149, PR 21150, PR 21151, PR 21155,
  PR 21158, PR 21159

-------------------------------------------------------------------
Wed Mar  8 11:25:04 UTC 2017 - rguenther@suse.com

- Update to binutils 2.28.
  * Add support for locating separate debug info files using the build-id
    method, where the separate file has a name based upon the build-id of
    the original file.
  * This version of binutils fixes a problem with PowerPC VLE 16A and 16D
    relocations which were functionally swapped, for example,
    R_PPC_VLE_HA16A performed like R_PPC_VLE_HA16D while R_PPC_VLE_HA16D
    performed like R_PPC_VLE_HA16A.  This could have been fixed by
    renumbering relocations, which would keep object files created by an
    older version of gas compatible with a newer ld.  However, that would
    require an ABI update, affecting other assemblers and linkers that
    create and process the relocations correctly.  It is recommended that
    all VLE object files be recompiled, but ld can modify the relocations
    if --vle-reloc-fixup is passed to ld.  If the new ld command line
    option is not used, ld will ld warn on finding relocations inconsistent
    with the instructions being relocated.
  * The nm program has a new command line option (--with-version-strings)
    which will display a symbol's version information, if any, after the
    symbol's name.
  * The ARC port of objdump now accepts a -M option to specify the extra
    instruction class(es) that should be disassembled.
  * The --remove-section option for objcopy and strip now accepts section
    patterns starting with an exclamation point to indicate a non-matching
    section.  A non-matching section is removed from the set of sections
    matched by an earlier --remove-section pattern.
  * The --only-section option for objcopy now accepts section patterns
    starting with an exclamation point to indicate a non-matching section.
    A non-matching section is removed from the set of sections matched by
    an earlier --only-section pattern.
  * New --remove-relocations=SECTIONPATTERN option for objcopy and strip.
    This option can be used to remove sections containing relocations.
    The SECTIONPATTERN is the section to which the relocations apply, not
    the relocation section itself.
  GAS
  * Add support for the RISC-V architecture.
  * Add support for the ARM Cortex-M23 and Cortex-M33 processors.
  GNU ld
  * The EXCLUDE_FILE linker script construct can now be applied outside of the
    section list in order for the exclusions to apply over all input sections
    in the list.
  * Add support for the RISC-V architecture.
  * The command line option --no-eh-frame-hdr can now be used in ELF based
    linkers to disable the automatic generation of .eh_frame_hdr sections.
  * Add --in-implib=<infile> to the ARM linker to enable specifying a set of
    Secure Gateway veneers that must exist in the output import library
    specified by --out-implib=<outfile> and the address they must have.
    As such, --in-implib is only supported in combination with --cmse-implib.
  * Extended the --out-implib=<file> option, previously restricted to x86 PE
    targets, to any ELF based target.  This allows the generation of an import
    library for an ELF executable, which can then be used by another application
    to link against the executable.
  GOLD
  * Add -z bndplt option (x86-64 only) to support Intel MPX.
  * Add --orphan-handling option.
  * Add --stub-group-multi option (PowerPC only).
  * Add --target1-rel, --target1-abs, --target2 options (Arm only).
  * Add -z stack-size option.
  * Add --be8 option (Arm only).
  * Add HIDDEN support in linker scripts.
  * Add SORT_BY_INIT_PRIORITY support in linker scripts.
- Add binutils-2.28-branch.diff.
- Remove binutils-2.27-branch.diff
- Remove binutils-2.27-fix-section-order.diff,
  refine_.cfi_sections_check_to_only_consider_compact_eh_frame.patch
  and aarch64-alignment-frags.patch now upstream.

-------------------------------------------------------------------
Mon Mar  6 17:06:55 UTC 2017 - schwab@linux-m68k.org

- Configure with --with-system-zlib

-------------------------------------------------------------------
Fri Feb 24 10:38:24 UTC 2017 - rguenther@suse.com

- Add binutils-bso21193.diff to fix section alignment on
  .gnu_debuglink.  [bso#21193]

-------------------------------------------------------------------
Tue Feb  7 11:42:02 UTC 2017 - rguenther@suse.com

- Add s390x to gold_archs.

-------------------------------------------------------------------
Mon Feb  6 15:25:44 UTC 2017 - afaerber@suse.de

- Fix alignment frags for aarch64 (boo#1003846)
  aarch64-alignment-frags.patch

-------------------------------------------------------------------
Sun Dec 18 18:36:08 UTC 2016 - jengelh@inai.de

- Call ldconfig for libbfd

-------------------------------------------------------------------
Tue Nov 30 09:55:02 UTC 2016 - idonmez@suse.com

- Add refine_.cfi_sections_check_to_only_consider_compact_eh_frame.patch
  from upstream to fix an assembler problem with clang on ARM.
  Fixes https://sourceware.org/bugzilla/show_bug.cgi?id=20648

-------------------------------------------------------------------
Mon Nov 28 13:16:47 UTC 2016 - rguenther@suse.com

- Update binutils-2.27-branch.diff to include recent fixes from the branch.
- Add binutils-2.27-fix-section-order.diff to restore monotonically
  increasing section offsets.

-------------------------------------------------------------------
Tue Oct  4 16:58:56 UTC 2016 - stefan.bruens@rwth-aachen.de

- Remove qemu workaround from spec file, since qemu 2.5.0rc0 the
  length of the argument list is no longer limited to 128 kByte.

-------------------------------------------------------------------
Wed Aug 24 11:26:22 UTC 2016 - rguenther@suse.com

- Update to binutils 2.27.
  * Add a configure option, --enable-64-bit-archive, to force use of a
    64-bit format when creating an archive symbol index.
  * Add --elf-stt-common= option to objcopy for ELF targets to control
    whether to convert common symbols to the STT_COMMON type.
  GAS:
  * Default to --enable-compressed-debug-sections=gas for Linux/x86 targets.
  * Add --no-pad-sections to stop the assembler from padding the end of output
    sections up to their alignment boundary.
  * Support for the ARMv8-M architecture has been added to the ARM port.
    Support for the ARMv8-M Security and DSP Extensions has also been added
    to the ARM port.
  * ARC backend accepts .extInstruction, .extCondCode, .extAuxRegister, and
    .extCoreRegister pseudo-ops that allow an user to define custom
    instructions, conditional codes, auxiliary and core registers.
  * Add a configure option --enable-elf-stt-common to decide whether ELF
    assembler should generate common symbols with the STT_COMMON type by
    default.  Default to no.
  * New command line option --elf-stt-common= for ELF targets to control
    whether to generate common symbols with the STT_COMMON type.
  * Add ability to set section flags and types via numeric values for ELF
    based targets.
  * Add a configure option --enable-x86-relax-relocations to decide whether
    x86 assembler should generate relax relocations by default.  Default to
    yes, except for x86 Solaris targets older than Solaris 12.
  * New command line option -mrelax-relocations= for x86 target to control
    whether to generate relax relocations.
  * New command line option -mfence-as-lock-add=yes for x86 target to encode
    lfence, mfence and sfence as "lock addl $0x0, (%[re]sp)".
  * Add assembly-time relaxation option for ARC cpus.
  * Add --with-cpu=TYPE configure option for ARC gas.  This allows the default
    cpu type to be adjusted at configure time.
  GOLD:
  * Add a configure option --enable-relro to decide whether -z relro should
    be enabled by default.  Default to yes.
  * Add support for s390, MIPS, AArch64, and TILE-Gx architectures.
  * Add support for STT_GNU_IFUNC symbols.
  * Add support for incremental linking (--incremental).
  GNU ld:
  * Add a configure option --enable-relro to decide whether -z relro should
    be enabled in ELF linker by default.  Default to yes for all Linux
    targets except FRV, HPPA, IA64 and MIPS.
  * Support for -z noreloc-overflow in the x86-64 ELF linker to disable
    relocation overflow check.
  * Add -z common/-z nocommon options for ELF targets to control whether to
    convert common symbols to the STT_COMMON type during a relocatable link.
  * Support for -z nodynamic-undefined-weak in the x86 ELF linker, which
    avoids dynamic relocations against undefined weak symbols in executable.
  * The NOCROSSREFSTO command was added to the linker script language.
  * Add --no-apply-dynamic-relocs to the AArch64 linker to do not apply
    link-time values for dynamic relocations.
- Add binutils-2.27-branch.diff with fixes on the branch sofar.
- Remove gold-relocate-tls.patch, included in binutils 2.27.

-------------------------------------------------------------------
Wed Jul  6 11:28:48 UTC 2016 - rguenther@suse.com

- Update to binutils 2.26.1.
- Remove binutils-2.26-branch.diff.

-------------------------------------------------------------------
Fri Mar 18 07:57:51 UTC 2016 - rguenther@suse.com

- Update binutils-2.26-branch.diff, updates to branch head.
  (swo#19807) (bnc#970239)
- Disable -mrelax-relocations by default on old products.

-------------------------------------------------------------------
Wed Mar  9 11:11:48 UTC 2016 - rguenther@suse.com

- Update binutils-2.26-branch.diff, updates to branch head.
  (swo#19739) (swo#19775)

-------------------------------------------------------------------
Mon Feb 29 12:49:50 UTC 2016 - rguenther@suse.com

- Add binutils-2.26-branch.diff, updates to branch head.
  * Adds -mrelax-relocations on x86
  * Fixes bso#19698

-------------------------------------------------------------------
Mon Feb  1 09:03:02 UTC 2016 - rguenther@suse.com

- Refresh cross-avr-nesc-as.patch

-------------------------------------------------------------------
Wed Jan 27 13:12:17 UTC 2016 - rguenther@suse.com

- Update to binutils 2.26
  * Add --fix-stm32l4xx-629360 to the ARM linker to enable a link-time
    workaround for a bug in the bus matrix / memory controller for some of
    the STM32 Cortex-M4 based products (STM32L4xx)
  * Add a configure option --enable-compressed-debug-sections={all,ld} to
    decide whether DWARF debug sections should be compressed by default.
  * Add support for the ARC EM/HS, and ARC600/700 architectures.
  * Experimental support for linker garbage collection (--gc-sections)
    has been enabled for COFF and PE based targets.
  * New command line option for ELF targets to compress DWARF debug
    sections, --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi].
  * New command line option, --orphan-handling=[place|warn|error|discard], to
    adjust how orphan sections are handled.  The default is 'place' which gives
    the current behaviour, 'warn' and 'error' issue a warning or error
    respectively when orphan sections are found, and 'discard' will discard all
    orphan sections.
  * Add support for LLVM plugin.
  * Add --print-memory-usage option to report memory blocks usage.
  * Add --require-defined option, it's like --undefined except the new symbol
    must be defined by the end of the link.
  * Add a configure option --enable-compressed-debug-sections={all,gas} to
    decide whether DWARF debug sections should be compressed by default.
  * Add support for the ARC EM/HS, and ARC600/700 architectures.  Remove
    assembler support for Argonaut RISC architectures.
  * Add option to objcopy to insert new symbols into a file:
    --add-symbol <name>=[<section>:]<value>[,<flags>]
  * Add support for the ARC EM/HS, and ARC600/700 architectures.
  * Extend objcopy --compress-debug-sections option to support
    --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi] for ELF
    targets.
  * Add --update-section option to objcopy.
  * Add --output-separator option to strings.
- Includes z13 support, remove 0001-S-390-Add-support-for-IBM-z13.patch,
  0002-S-390-Add-check-for-length-field-operand.patch,
  0003-S-390-Add-more-IBM-z13-instructions.patch,
  0004-S-390-Fixes-for-z13-instructions.patch and
  0005-S-390-z13-use-GNU-attribute-to-indicate-vector-ABI.patch
- Includes fixes in binutils-fix--dynamic-list.patch,
  binutils-fix-gold-aarch64.diff, gold-arm64-abi-pagesize.patch
  and s390-troo-insn-type.patch
- Refresh s390-pic-dso.diff and binutils-build-as-needed.diff

-------------------------------------------------------------------
Wed Jan 13 08:31:17 UTC 2016 - schwab@suse.de

- gold-relocate-tls.patch: Fix internal error when applying TLSDESC
  relocations with no TLS segment

-------------------------------------------------------------------
Wed Oct 14 09:19:36 UTC 2015 - schwab@suse.de

- s390-troo-insn-type.patch: fix wrong insn type for troo insn
- aarch64-common-pagesize.patch: change default common-page-size to 64K on
  aarch64

-------------------------------------------------------------------
Thu Oct  1 10:35:13 UTC 2015 - schwab@suse.de

- gold-arm64-abi-pagesize.patch: fix ABI pagesize for aarch64 in gold

-------------------------------------------------------------------
Tue Jul 21 12:43:33 UTC 2015 - matz@suse.de

- Disable use-hashtype-both-by-default.diff for
  the mips target, it's incompatible with it.  [bnc #938658]

-------------------------------------------------------------------
Mon Jul 13 11:16:25 UTC 2015 - afaerber@suse.de

- Add cross-rx-binutils package for Renesas RX

-------------------------------------------------------------------
Fri Jul 10 15:57:46 UTC 2015 - schwab@linux-m68k.org

- Work around qemu bug

-------------------------------------------------------------------
Thu Jul  9 14:26:13 UTC 2015 - matz@suse.de

- Update to 2.25 branch at 2f5b97b4f (changes
  binutils-2.25-branch.diff.gz) fixes PR 18481, gas/18541.
- Add patches for s390 z13 support (backports from
  to-be 2.26):
  0001-S-390-Add-support-for-IBM-z13.patch
  0002-S-390-Add-check-for-length-field-operand.patch
  0003-S-390-Add-more-IBM-z13-instructions.patch
  0004-S-390-Fixes-for-z13-instructions.patch
  0005-S-390-z13-use-GNU-attribute-to-indicate-vector-ABI.patch .

-------------------------------------------------------------------
Tue Jul  7 11:00:42 UTC 2015 - afaerber@suse.de

- Fix %TARGET vs. $TARGET_OS inconsistencies by turning $TARGET_OS
  into %TARGET_OS for reuse in install and file sections.
  This fixes the assumption that $TARGET_OS will match %{TARGET}*.

-------------------------------------------------------------------
Wed Jun 10 07:55:29 UTC 2015 - dmueller@suse.com

- enable gold for aarch64

-------------------------------------------------------------------
Mon May 18 15:26:32 UTC 2015 - matz@suse.de

- Move sed call from %prep to %build to not disturb quilt.
- Add binutils-2.25-branch.diff.gz:
  Update to 2.25 branch at 8fe8994c, fixing many bugs:
  PR ld/15228, binutils/17512, 17165, binutils/17531, ld/17615, 17666,
  ld/17709, gas/17753, 17755, 17817, ld/17827, 17842, binutils/17926,
  17954, 18010, ld/18167, ld/18222, ld/18270.
- Remove eh-frame-hdr-on-shared-lib-bfd.patch: Included already.
- Remove gold-opd-visibility.patch: Included already.

-------------------------------------------------------------------
Mon May 18 06:38:32 UTC 2015 - meissner@suse.com

- move info deinstall to preun section

-------------------------------------------------------------------
Sat May 16 15:05:17 UTC 2015 - hrvoje.senjan@gmail.com

- Added binutils-fix--dynamic-list.patch:
  Fixes https://sourceware.org/bugzilla/show_bug.cgi?id=13577 and
  https://sourceware.org/bugzilla/show_bug.cgi?id=16992

-------------------------------------------------------------------
Thu Feb 19 09:22:54 UTC 2015 - schwab@suse.de

- gold-opd-visibility.patch: Set default visibility on discarded .opd
  symbols

-------------------------------------------------------------------
Wed Jan 21 09:15:34 UTC 2015 - schwab@suse.de

- eh-frame-hdr-on-shared-lib-bfd.patch: Don't create .eh_frame_hdr on
  shared lib bfd, fixes building libgcj on ppc64

-------------------------------------------------------------------
Thu Jan 15 08:54:54 UTC 2015 - rguenther@suse.com

- Update to binutils 2.25 release.
  * Add --data option to strings to only print strings in loadable, initialized
    data sections.  Change the default behaviour to be --all, but add a new
    configure time option of --disable-default-strings-all to restore the old
    default behaviour.
  * Add --include-all-whitespace to strings.
  * Add --dump-section option to objcopy.
  * Add support for the Andes NDS32.
  * PE binaries now once again contain real timestamps by default.  To disable
    the inclusion of a timestamp in a PE binary, use the --no-insert-timestamp
    command line option.
  * Replace support for openrisc and or32 with support for or1k.
  * Add support for the --build-id command line option to COFF based targets.
  * x86/x86_64 pe-coff now supports the --build-id option.
  * Add support for the AVR Tiny microcontrollers.
  * Enhanced the ARM port to accept the assembler output from the CodeComposer
    Studio tool.  Support is enabled via the new command line option -mccs.
- Update to 2.25 branch head.
  * Pulls PIE fixes.

-------------------------------------------------------------------
Mon Jan 12 20:26:26 UTC 2015 - dimstar@opensuse.org

- Minor fix on the usage of update-alternatives
  https://en.opensuse.org/openSUSE:Packaging_Multiple_Version_guidelines

-------------------------------------------------------------------
Mon Dec  1 16:33:29 UTC 2014 - matz@suse.de

- Update to current 2.25 pre-release branch, at 127a4644.
- binutils-fix-gold-aarch64.diff: fixing build temporarily broken
  on brach.
- Remove obsolete patches: binutils-2.24-branch.diff.gz,
  pie-m68k.patch, binutils-2.24-auto-plugin.diff, ld-testsuite.patch,
  binutils-2.24-bso16746.diff .

-------------------------------------------------------------------
Fri Oct 31 10:49:03 UTC 2014 - afaerber@suse.de

- Enable Adapteva Epiphany target

-------------------------------------------------------------------
Tue May  6 14:02:26 UTC 2014 - rguenther@suse.com

- binutils-2.24-bso16746.diff: Fix bso#16746, spurious warnings
  for warn annotated symbols with LTO.

-------------------------------------------------------------------
Sun Apr  6 18:48:22 UTC 2014 - schwab@linux-m68k.org

- ld-dtags.diff: update testsuite for --enable-new-dtags default
- ld-testsuite.patch: fix spurious failures in ld-plugin/lto.exp

-------------------------------------------------------------------
Thu Apr  3 10:56:19 UTC 2014 - rguenther@suse.com

- binutils-2.24-auto-plugin.diff: Update from git commit that went
  to trunk.

-------------------------------------------------------------------
Wed Mar 26 15:29:34 UTC 2014 - matz@suse.de

- Update to current 2.24 branch at 25f1c421:
  AVX512 fixes, new x86 instructions clflushopt, xsaves, xsavec, xrstors.
  aarch64: linker fixes for PLT stubs, correct float const 0.0 parsing,
  support ifunc in static links.
  Fix ld/16643 (problem with GCed sections).
  powerpc64le: fix ld segfault with --emit-relocs.
  Fix buffer underrun in x86 disassembler.
  Fix merging of skipped weak symbols.  [bnc #863764]

-------------------------------------------------------------------
Mon Mar 24 13:58:29 UTC 2014 - rguenther@suse.com

- Add binutils-2.24-auto-plugin.diff to make plugin auto-load work
  for GCC LTO objects.  [bso#14698]

-------------------------------------------------------------------
Fri Feb 21 16:59:02 UTC 2014 - matz@suse.de

- Disable --enable-deterministic-archives again, as it breaks 
  valid Makefiles.

-------------------------------------------------------------------
Mon Feb 10 23:07:23 UTC 2014 - subchaser1@gmail.com

- cross-avr-size.patch: AVR-style output in avr-size utility

-------------------------------------------------------------------
Mon Jan 27 05:43:48 UTC 2014 - crrodriguez@opensuse.org

- build with --enable-deterministic-archives so ar and ranlib 
  cooperate in the creation of reproducible builds.

-------------------------------------------------------------------
Mon Dec  9 15:10:27 UTC 2013 - matz@suse.de

- Update to 2.24 release and to branch at 9177510e:
  * Add support for the Texas Instruments MSP430X processor.
  * Add support for Altera Nios II.
  * Add support for the V850E3V5 architecture.
  * Add support for the Imagination Technologies Meta processor.
  * --enable-new-dtags no longer generates old dtags in addition to new dtags.
  * Remove assembler and linker support for MIPS ECOFF targets.
  * Remove assembler support for MIPS ECOFF targets.
  * Add ALIGN_WITH_INPUT to the linker script language to force the
    alignment of an output section to use the maximum alignment of
    all its input sections.
  * Add -gdwarf-sections command line option to enable per-code-section
    generation of DWARF .debug_line sections.
  * Objcopy now supports wildcard characters in command line options that take
    section names.

-------------------------------------------------------------------
Fri Nov 29 14:59:52 UTC 2013 - matz@suse.de

- Update to 2.23.92 prerelease, mostly for ppc64le support.
- Add cross-ppc64le-binutils.

-------------------------------------------------------------------
Mon Oct 28 15:53:03 UTC 2013 - schwab@suse.de

- Add cross-m68k-binutils

-------------------------------------------------------------------
Wed Oct  9 08:55:16 UTC 2013 - schwab@suse.de

- pie-m68k.patch: Emit DT_DEBUG also for PIE

-------------------------------------------------------------------
Fri Sep 20 15:53:55 UTC 2013 - matz@suse.de

- Update to 2.23.90 prerelease, remove patches that
  are upstream ( aarch64-biarch.patch, aarch64-dynamic-placement.patch,
  aarch64-execstack.patch, aarch64-gc-section-support.patch,
  aarch64-support-1796bf893c4729d5c523502318d72cae78495d6c.diff,
  aarch64-support-f426901e1be0f58fe4e9386cada50ca57d0a4f36.diff,
  binutils-2.22-objalloc.patch,
  binutils-2.23.52.0.1-64-bit-thin-archives.patch,
  s390-machinemode.patch, warning-symbol-sections.patch).

-------------------------------------------------------------------
Sat Aug 31 13:11:36 UTC 2013 - idonmez@suse.com

- Add binutils-2.23.52.0.1-64-bit-thin-archives.patch to fix thin
  archive creation on 64bit systems. This is rh#915411 and should
  also fix webkitgtk on s390x.

-------------------------------------------------------------------
Mon Jul 29 18:13:43 UTC 2013 - schwab@suse.de

- warning-symbol-sections.patch: correct test in last change

-------------------------------------------------------------------
Mon Jul 22 07:18:33 UTC 2013 - schwab@suse.de

- warning-symbol-sections.patch: don't clobber warning sections from
  shared libraries

-------------------------------------------------------------------
Mon Jul  1 08:18:22 UTC 2013 - schwab@suse.de

- aarch64-dynamic-placement.patch: Correct placement of &_DYNAMIC

-------------------------------------------------------------------
Wed Jun 26 22:32:43 UTC 2013 - dmueller@suse.com

- add armv6l to target list

-------------------------------------------------------------------
Tue Jun 11 14:36:31 UTC 2013 - dmueller@suse.com

- add aarch64-support-1796bf893c4729d5c523502318d72cae78495d6c.diff
- add aarch64-support-f426901e1be0f58fe4e9386cada50ca57d0a4f36.diff

-------------------------------------------------------------------
Wed May 15 11:25:50 UTC 2013 - rguenther@suse.com

- Drop cross-alpha-binutils.  Adjust pre-checkin.sh to remove
  all cross packages before re-generating them.

-------------------------------------------------------------------
Tue May 14 15:31:59 UTC 2013 - schwab@suse.de

- Tell bfd ELF backend that aarch64 defaults to non-exec stack

-------------------------------------------------------------------
Wed Apr  3 13:08:47 UTC 2013 - rguenther@suse.com

- Re-instantiate patch to warn about non-PIC code in shared objects
  on s390x.

-------------------------------------------------------------------
Thu Mar 28 12:46:09 UTC 2013 - rguenther@suse.com

- Update to binutils 2.23.2.
  * various bugfixes
- Refresh no longer applying patch.

-------------------------------------------------------------------
Tue Mar  5 20:05:50 UTC 2013 - schwab@suse.de

- Add aarch64 support for --gc-sections
  (from http://sourceware.org/ml/binutils/2013-02/msg00285.html)

-------------------------------------------------------------------
Wed Dec 19 10:52:46 UTC 2012 - schwab@suse.de

- Backport s390 .machinemode pseudo insn

-------------------------------------------------------------------
Fri Nov 30 12:46:35 UTC 2012 - rguenther@suse.com

- Revert upstream change to error on bfd.h usage without first
  including some config.h

-------------------------------------------------------------------
Wed Nov 28 10:56:12 UTC 2012 - rguenther@suse.com

- Change update-alternative priorities to always prefer GNU ld

-------------------------------------------------------------------
Tue Nov 27 15:30:41 UTC 2012 - jengelh@inai.de

- Implement update-alternatives service for gold

-------------------------------------------------------------------
Tue Nov 27 12:44:19 UTC 2012 - adrian@suse.de

- update to version 2.23.1 release
- add aarch64 biarch patch

-------------------------------------------------------------------
Sat Nov 24 02:05:34 UTC 2012 - adrian@suse.de

- add cross-aarch64-binutils

-------------------------------------------------------------------
Thu Nov 22 19:38:33 UTC 2012 - jengelh@inai.de

- Have pre_checkin.sh create cross-sparc64-binutils

-------------------------------------------------------------------
Wed Oct 24 11:03:16 UTC 2012 - rguenther@suse.com

- Update to binutils 2.23 branch head.
  * Includes binutils 2.23 release.

-------------------------------------------------------------------
Mon Sep 17 13:57:11 UTC 2012 - rguenther@suse.com

- Update to binutils 2.23 release candidate.
- Remove no longer applying AVR patch.

-------------------------------------------------------------------
Fri Sep  7 12:42:18 UTC 2012 - coolo@suse.com

- add makeinfo as explicit buildrequire

-------------------------------------------------------------------
Mon Sep  3 09:59:53 UTC 2012 - idonmez@suse.com

- Enable threaded linking in gold.

-------------------------------------------------------------------
Mon Sep  3 09:03:59 UTC 2012 - rguenther@suse.com

- Add patch to fix libiberty integer overflow.  [bnc#776968]

-------------------------------------------------------------------
Thu Jun 21 08:43:29 UTC 2012 - adrian@suse.de

- fix default elf format for arm cross tools

-------------------------------------------------------------------
Tue Jun 19 05:09:40 UTC 2012 - factory-maintainer@kulow.org

- fix stupid typo

-------------------------------------------------------------------
Mon Jun 18 11:06:01 UTC 2012 - coolo@suse.com

- the previous fix was not good enough, another iteration of the same

-------------------------------------------------------------------
Thu Jun 14 11:53:56 UTC 2012 - coolo@suse.com

- exclude our target arch for cross compiling - this is just not cross

-------------------------------------------------------------------
Thu Apr 19 11:28:41 UTC 2012 - rguenther@suse.com

- Consistently use $target-suse-linux triplets.

-------------------------------------------------------------------
Wed Feb 15 11:32:14 UTC 2012 - rguenther@suse.com

- Drop the new spec files again, instead move the cross-$arch-binutils
  contents to /usr, away from /opt.

-------------------------------------------------------------------
Tue Feb 14 17:53:08 UTC 2012 - max@suse.com

- Add spec files that build variants for arm and avr that install
  under /usr rather than /opt/cross.
- Add avr-binutils-relocs.patch to fix a crash in avr-ld.
  http://sourceware.org/bugzilla/show_bug.cgi?id=12161

-------------------------------------------------------------------
Thu Jan 26 10:36:33 UTC 2012 - rguenther@suse.com

- Fix package licenses to follow SPDX format, adjust to reality.

-------------------------------------------------------------------
Wed Jan 25 14:12:40 UTC 2012 - rguenther@suse.com

- Amend patch to fix arm unwind table corruption.  [bso#13449]

-------------------------------------------------------------------
Wed Jan  4 12:31:02 UTC 2012 - rguenther@suse.com

- Add patch to fix arm unwind table corruption.  [bso#13449]
- Canonicalize arm targets.
- Enable gold for arm.

-------------------------------------------------------------------
Tue Jan  3 14:42:59 UTC 2012 - rguenther@suse.com

- Add patch to fix build-id issues.  [bso#12451]

-------------------------------------------------------------------
Tue Dec  6 10:48:16 UTC 2011 - rguenther@suse.com

- Update to final binutils 2.22 release.

-------------------------------------------------------------------
Wed Nov  2 09:27:38 UTC 2011 - rguenther@suse.com

- Update to binutils-2_22-branch head.
  * Adds support for LDPT_GET_SYMBOLS_V2.
  * Drop patches that have been applied upstream.

-------------------------------------------------------------------
Fri Sep 30 11:25:38 UTC 2011 - tserong@suse.com

- Fix --gc-sections failure with symbol versioning [bso#13195]

-------------------------------------------------------------------
Wed Sep 28 13:08:07 UTC 2011 - rguenther@suse.com

- Update to binutils-2_22-branch head.
  * Drop patches that have been applied upstream.
  * Drop patches that no longer apply.

-------------------------------------------------------------------
Thu Sep 22 09:59:07 UTC 2011 - adrian@suse.de

- use -gnueabi extension to switch to new abi for arm

-------------------------------------------------------------------
Thu Sep 22 06:54:34 CEST 2011 - dmueller@suse.de

- Add support for arm-*-gnueabihf targets (PR ld/12643)

-------------------------------------------------------------------
Wed Sep 21 21:44:12 UTC 2011 - adrian@suse.de

- add arm targets

-------------------------------------------------------------------
Tue Aug 23 11:39:25 UTC 2011 - rguenther@novell.com

- Fix XLC object linker complaints.  [bnc#713504]

-------------------------------------------------------------------
Sun Aug 21 14:14:41 UTC 2011 - aj@suse.de

- Make --no-copy-dt-needed-entries the default for ld.

-------------------------------------------------------------------
Tue Jul 12 08:54:56 UTC 2011 - rguenther@novell.com

- Add patch for bogus executable stack setting with -flto.  [bso#12982]

-------------------------------------------------------------------
Mon Jul 11 08:42:13 UTC 2011 - rguenther@novell.com

- BuildRequire glibc-devel-static to fix static linking tests.

-------------------------------------------------------------------
Tue Jul  5 12:42:10 UTC 2011 - saschpe@suse.de

- Add patch to fix a readelf endless loop bug.  [bso#12855]

-------------------------------------------------------------------
Tue Jun 28 08:12:12 UTC 2011 - rguenther@novell.com

- Update to binutils 2.21.1 release.
  * Add --interleave-width option to objcopy to allowing copying a range
    of bytes from the input to the output with the --interleave option.
  * Add support for the TMS320C6000 (TI C6X) processor family.
  * Readelf can now display ARM unwind tables (.ARM.exidx / .ARM.extab)
    using the -u / --unwind option.
  * Add --dyn-syms to readelf to dump dynamic symbol table.
  * A new tool - elfedit - has been added to directly manipulate ELF
    format binaries.
  * Add to dlltool .def file feature of aliasing PE internal symbol name
    by '== <ID>' option.
  * Add a new command line option -a / --addresses to addr2line to display
    the address before function name or source filename.
  * Add a new command line option -p / --pretty-print to addr2line to have
    a more human readable output.
  * The hppa/som targets can now be compiled on any host.
- Add dependency to opcodes from gold.

-------------------------------------------------------------------
Fri Jun 17 15:23:21 CEST 2011 - matz@suse.de

- Add support for x86_64-pep target [needed for Xen fate #311376]

-------------------------------------------------------------------
Thu Jun  9 14:20:07 UTC 2011 - matz@novell.com

- Add patch to support AMD Bulldozer v2 [fate #312149]

-------------------------------------------------------------------
Tue Jun  7 11:03:12 UTC 2011 - rguenther@novell.com

- Update to binutils-2_21-branch head.  [bnc#698346]

-------------------------------------------------------------------
Fri May 27 13:46:53 UTC 2011 - rguenther@novell.com

- Disable cross-sh4-binutils.

-------------------------------------------------------------------
Wed May  4 08:47:15 UTC 2011 - rguenther@novell.com

- Update to binutils-2_21-branch head.  [bnc#691290]

-------------------------------------------------------------------
Tue Apr 19 12:43:11 UTC 2011 - rguenther@novell.com

- Update to binutils-2_21-branch head.  [fate#311554] [fate#311972]

-------------------------------------------------------------------
Mon Jan 10 16:51:10 UTC 2011 - rguenther@novell.com

- Update to binutils 2.21.
  * linker plugin support
  * AMD Bulldozer enablement
- Disable package fail when testsuite failures occur for now
  because of gold (testsuite) issues.

-------------------------------------------------------------------
Tue Jul 27 11:43:24 UTC 2010 - rguenther@novell.com

- drop cross-avr-binutils

-------------------------------------------------------------------
Tue Jul 27 11:23:20 UTC 2010 - coolo@novell.com

- split the gold build into 2 make steps to avoid random
  build failures (ugly work around in fact)

-------------------------------------------------------------------
Thu Jul  8 05:28:53 UTC 2010 - jengelh@medozas.de

- Default to creating ELF64 objects under sparc64

-------------------------------------------------------------------
Mon Jun 28 06:38:35 UTC 2010 - jengelh@medozas.de

- use %_smp_mflags

-------------------------------------------------------------------
Mon Apr 12 13:34:27 CEST 2010 - matz@suse.de

- Initialize memory for MALLOC_PERTURB on ppc.  [PR gas/11486]

Rewrite history by including this:
    Wed Mar 24 17:23:32 CET 2010 - matz@suse.de
    
    - Fix testcase breaking with MALLOC_PERTURB.  [bnc #590820]
    
    Sat Feb 13 17:52:11 CET 2010 - rguenther@suse.de
    
    - Drop build counter from the libbfd and libopcode SONAMEs.
    
    Fri Jan 22 15:31:06 CET 2010 - matz@suse.de
    
    - Update to current binutils-2_20-branch.  [bnc #561142, #573019]
    
    Wed Jan 13 15:16:44 CET 2010 - matz@novell.com
    
    - Fix removal of unwanted files (man,info,libiberty) on the
      cross binutils.
    
    Sat Dec 12 19:09:40 CET 2009 - jengelh@medozas.de
    
    - add baselibs.conf as a source
    
    Mon Dec  7 16:14:27 CET 2009 - jengelh@medozas.de
    
    - SPARC build support for binutils
    
    Wed Nov  4 15:44:30 CET 2009 - matz@suse.de
    
    - Copy from SLE11 SP1.  Compared to that add --as-needed by default
      patch again.
    
    Mon Oct 19 11:15:51 CEST 2009 - rguenther@suse.de
    
    - Update to binutils 2.20 snapshot.
      * disable patches that no longer apply
      * disable make check handling everywhere
    
-------------------------------------------------------------------
Fri Apr  9 14:42:48 CEST 2010 - matz@suse.de

- Fix encoding of LWP instructions, and get rid of 16bit forms.

-------------------------------------------------------------------
Fri Feb 12 16:46:42 CET 2010 - matz@suse.de

- Add more aliases for VPCOM* instructions, xsave64, xrstor64,
  and vpermil2p (XOP support).

-------------------------------------------------------------------
Tue Feb  9 13:46:35 CET 2010 - matz@suse.de

- Add support for AMD XOP instructions.  [bnc #578249]

-------------------------------------------------------------------
Fri Jan 22 15:40:21 CET 2010 - matz@suse.de

- Update to current binutils-2_20-branch.  [bnc #561142, #573019]

-------------------------------------------------------------------
Wed Nov  4 15:44:30 CET 2009 - matz@suse.de

- Update to binutils 2.20 branch, remove patches that went upstream.
  Don't activate --as-needed by default for SLE11 SP1.
  [fate #306880, #307034]
  [bnc #546106, #483978]

-------------------------------------------------------------------
Mon Oct 12 15:11:44 CEST 2009 - rguenther@suse.de

- enable gold plugins, fix build on older distros.

-------------------------------------------------------------------
Wed Oct  7 13:09:04 UTC 2009 - coolo@novell.com

- obsolete binutils-32bit, it can't be left around

-------------------------------------------------------------------
Mon Aug 24 16:53:13 CEST 2009 - rguenther@suse.de

- disable gold build before openSUSE 11.0.

-------------------------------------------------------------------
Thu Aug 20 11:20:43 CEST 2009 - rguenther@suse.de

- add patch to drop .gnu.lto_* sections

-------------------------------------------------------------------
Fri Jun 12 18:18:21 CEST 2009 - coolo@novell.com

- follow only SUSE_ASNEEDED

-------------------------------------------------------------------
Tue Jun  9 14:48:40 CEST 2009 - matz@suse.de

- Use --as-needed by default in the build system.

-------------------------------------------------------------------
Wed May 27 17:12:55 CEST 2009 - rguenther@suse.de

- Update to head of trunk.
- Add patch to fix gold build with glibc 2.10, gcc 4.4.

-------------------------------------------------------------------
Fri Mar 27 14:39:32 CET 2009 - rguenther@suse.de

- Update to head of trunk.
- Add zlib-devel-static BuildRequires to fix testsuite.
- Package gold locales.

-------------------------------------------------------------------
Mon Feb 16 11:50:04 CET 2009 - schwab@suse.de

- Update to head of trunk.

-------------------------------------------------------------------
Mon Feb 16 11:33:53 CET 2009 - rguenther@suse.de

- Update to 2.19.51 snapshot.  Fixes build with GCC 4.4.

-------------------------------------------------------------------
Tue Jan 27 17:51:43 CET 2009 - schwab@suse.de

- Update to head of trunk.

-------------------------------------------------------------------
Thu Jan 22 14:20:16 CET 2009 - schwab@suse.de

- Adjust list of extra targets.

-------------------------------------------------------------------
Mon Jan 19 18:19:30 CET 2009 - schwab@suse.de

- Update to head of trunk.
- Add gold.

-------------------------------------------------------------------
Thu Jan 15 16:42:33 CET 2009 - schwab@suse.de

- Use consistent label names.

-------------------------------------------------------------------
Thu Jan 15 08:01:02 CET 2009 - olh@suse.de

- remove Requires: binutils-XXbit in binutils-devel-XXbit package

-------------------------------------------------------------------
Fri Jan  9 14:42:24 CET 2009 - schwab@suse.de

- Fix last change.

-------------------------------------------------------------------
Fri Jan  9 12:44:44 CET 2009 - olh@suse.de

- build binutils and binutils-devel -XXbit packages (bnc#445037)

-------------------------------------------------------------------
Wed Dec 10 12:34:56 CET 2008 - olh@suse.de

- use Obsoletes: -XXbit only for ppc64 to help solver during distupgrade
  (bnc#437293)

-------------------------------------------------------------------
Thu Dec  4 17:34:07 CET 2008 - schwab@suse.de

- Update symbol visibility checks during linking on s390.

-------------------------------------------------------------------
Wed Dec  3 13:13:25 CET 2008 - schwab@suse.de

- Fix corner case during link relaxing.

-------------------------------------------------------------------
Thu Nov 27 16:55:54 CET 2008 - schwab@suse.de

- Fix disassembler bug.
- Help some devel users.

-------------------------------------------------------------------
Fri Nov 21 15:03:27 CET 2008 - schwab@suse.de

- Import bugfixes from 2.19 branch.

-------------------------------------------------------------------
Wed Nov 19 17:50:52 CET 2008 - schwab@suse.de

- Fix handling of DW_CFA_advance_loc* in the assembler.

-------------------------------------------------------------------
Mon Nov 10 15:29:56 CET 2008 - schwab@suse.de

- Update last change.

-------------------------------------------------------------------
Fri Nov  7 11:41:37 CET 2008 - schwab@suse.de

- Fix crash in strip.

-------------------------------------------------------------------
Thu Nov  6 11:16:14 CET 2008 - rguenther@suse.de

- build cross-spu-binutils with a /usr/spu sysroot

-------------------------------------------------------------------
Thu Oct 30 12:34:56 CET 2008 - olh@suse.de

- obsolete old -XXbit packages (bnc#437293)

-------------------------------------------------------------------
Mon Oct 20 13:21:04 CEST 2008 - schwab@suse.de

- Update to binutils 2.19.
  * Added -wL switch to dump decoded contents of .debug_line.
  * Added support for "thin" archives which contain pathnames pointing to
    object files rather than the files themselves and which contain a
    flattened symbol index for all objects, and archives, which have been
    added to the archive.
  * Added -F switch to objdump to include file offsets in the disassembly.
  * Added -c switch to readelf to allow string dumps of archive symbol index.
  * Support for SSE5 has been added to the i386 port.
  * Added -p switch to readelf to allow string dumps of sections.
  * New pseudo op .cfi_val_encoded_addr, to record constant addresses in unwind
    tables without runtime relocation.
  * New command line option, -h-tick-hex, for sh, m32c, and h8/300 targets, which
    adds compatibility with H'00 style hex constants.
  * New command line option, -msse-check=[none|error|warning], for x86
    targets.
  * New sub-option added to the assembler's -a command line switch to
    generate a listing output.  The 'g' sub-option will insert into the listing
    various information about the assembly, such as assembler version, the
    command line options used, and a time stamp.
  * New command line option -msse2avx for x86 target to encode SSE
    instructions with VEX prefix.
  * Add Intel XSAVE, EPT, MOVBE, AES, PCLMUL, AVX/FMA support for x86 target.
  * New command line options, -march=CPU[,+EXTENSION...], -mtune=CPU,
    -mmnemonic=[att|intel], -msyntax=[att|intel], -mindex-reg,
    -mnaked-reg and -mold-gcc, for x86 targets.
  * Support for generating wide character strings has been added via the new
    pseudo ops: .string16, .string32 and .string64.
  * Support for SSE5 has been added to the i386 port.
  * Linker scripts support a new INSERT command that makes it easier to
    augment the default script.
  * Linker script input section filespecs may now specify a file within an
    archive by writing "archive:file".
  * The --sort-common switch now has an optional argument which specifies the
    direction of sorting.
  * The M68K linker now supports multiple GOT generation schemes controlled via
    the --got=<type> command line option.
  * The ARM EABI linker will now generate stubs for function calls to symbols
    that are too far away.  The placement of the stubs is controlled by a new
    linker command line option: --stub-group-size=N.

-------------------------------------------------------------------
Thu Oct  9 11:18:47 CEST 2008 - schwab@suse.de

- Bug fixes.

-------------------------------------------------------------------
Tue Oct  7 17:35:29 CEST 2008 - jblunck@suse.de

- bfd-assign_file_positions_for_load_sections-STRIP_NONDEBUG-fix.diff:
  Do not only look at the first section in a segment to decide if it has
  contents or not. This fixes the "section ... can't be allocated in segment"
  errors when using objcopy --only-keep-debug to create the *.debug files.

-------------------------------------------------------------------
Wed Sep 17 13:22:44 CEST 2008 - schwab@suse.de

- Update to binutils 2.18.91 snapshot.

-------------------------------------------------------------------
Fri Sep 12 12:00:03 CEST 2008 - schwab@suse.de

- Update to head of 2.19 branch.

-------------------------------------------------------------------
Thu Sep  4 11:00:48 CEST 2008 - schwab@suse.de

- Update to head of trunk.

-------------------------------------------------------------------
Fri Aug  8 11:09:38 CEST 2008 - schwab@suse.de

- Update to head of trunk.

-------------------------------------------------------------------
Fri Jul 18 15:08:23 CEST 2008 - schwab@suse.de

- Update to head of trunk.

-------------------------------------------------------------------
Sun Jul 13 16:57:36 CEST 2008 - olh@suse.de

- enable targets i386-macos10, powerpc-macos, powerpc-macos10,
  spu-elf unconditionally in binutils

-------------------------------------------------------------------
Fri Jul 11 12:02:45 CEST 2008 - schwab@suse.de

- Update to head of trunk.

-------------------------------------------------------------------
Wed Jun 18 16:07:36 CEST 2008 - schwab@suse.de

- Update to head of trunk.

-------------------------------------------------------------------
Thu Apr 10 12:54:45 CEST 2008 - ro@suse.de

- added baselibs.conf file to build xxbit packages
  for multilib support

-------------------------------------------------------------------
Wed Apr  9 16:24:43 CEST 2008 - schwab@suse.de

- Update to head of trunk.

-------------------------------------------------------------------
Tue Mar 25 10:12:29 CET 2008 - schwab@suse.de

- Update to head of trunk.

-------------------------------------------------------------------
Fri Mar  7 11:25:29 CET 2008 - schwab@suse.de

- Update to head of trunk.

-------------------------------------------------------------------
Mon Feb 25 14:21:11 CET 2008 - schwab@suse.de

- Update to head of trunk.

-------------------------------------------------------------------
Fri Feb 15 13:58:17 CET 2008 - schwab@suse.de

- Update to head of trunk.

-------------------------------------------------------------------
Sun Feb 10 09:46:31 CET 2008 - schwab@suse.de

- Allow R_S390_PC32DBL against protected function symbols.

-------------------------------------------------------------------
Fri Feb  1 13:14:45 CET 2008 - schwab@suse.de

- Update to head of trunk.

-------------------------------------------------------------------
Fri Jan 25 15:52:43 CET 2008 - schwab@suse.de

- Update to head of trunk.

-------------------------------------------------------------------
Thu Jan 17 16:31:57 CET 2008 - schwab@suse.de

- Update to head of trunk.

-------------------------------------------------------------------
Thu Jan 10 11:01:46 CET 2008 - schwab@suse.de

- Update to head of trunk.

-------------------------------------------------------------------
Mon Nov 12 16:21:08 CET 2007 - schwab@suse.de

- Update to head of trunk.

-------------------------------------------------------------------
Tue Oct  2 12:55:06 CEST 2007 - schwab@suse.de

- Update to head of trunk.
- Add hppa64 target.

-------------------------------------------------------------------
Mon Sep  3 15:51:39 CEST 2007 - schwab@suse.de

- Add fix for PR4888.

-------------------------------------------------------------------
Thu Jul 26 12:24:59 CEST 2007 - schwab@suse.de

- Update to head of trunk.

-------------------------------------------------------------------
Fri Jul 13 11:28:31 CEST 2007 - schwab@suse.de

- Update to head of trunk.

-------------------------------------------------------------------
Fri Jun 29 14:34:18 CEST 2007 - schwab@suse.de

- Update to head of trunk.

-------------------------------------------------------------------
Fri Jun 22 11:48:38 CEST 2007 - schwab@suse.de

- Update to head of trunk.
- Drop Bdirect patches.

-------------------------------------------------------------------
Mon Jun 11 15:57:58 CEST 2007 - schwab@suse.de

- Update to head of trunk.

-------------------------------------------------------------------
Sat Jun  2 21:35:09 CEST 2007 - schwab@suse.de

- Allow only static linking of lib{bfd,opcodes} outside binutils.

-------------------------------------------------------------------
Tue May 15 12:42:02 CEST 2007 - schwab@suse.de

- Update to head of trunk.

-------------------------------------------------------------------
Fri May  4 11:27:27 CEST 2007 - schwab@suse.de

- Update to binutils CVS HEAD.
- Remove obsolete obsoletes.

-------------------------------------------------------------------
Mon Apr 23 14:55:49 CEST 2007 - olh@suse.de

- Fix POWER6 floating point disassembling [#266874]

-------------------------------------------------------------------
Thu Apr 12 22:08:48 CEST 2007 - schwab@suse.de

- Build cross tools with sysroot.

-------------------------------------------------------------------
Thu Apr  5 10:45:44 CEST 2007 - schwab@suse.de

- Update to binutils CVS HEAD.
- Add spu to the list of cross targets.

-------------------------------------------------------------------
Mon Mar 26 15:45:04 CEST 2007 - rguenther@suse.de

- Add bison and flex BuildRequires.

-------------------------------------------------------------------
Wed Mar 21 11:37:06 CET 2007 - schwab@suse.de