Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
openSUSE:Leap:15.4:ARM
multipath-tools.25760
multipath-tools.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File multipath-tools.changes of Package multipath-tools.25760
------------------------------------------------------------------- Fri Sep 30 20:47:21 UTC 2022 - Martin Wilck <mwilck@suse.com> - Use %tmpfiles_create macro for tmpfiles.d file ------------------------------------------------------------------- Fri Sep 30 16:12:52 UTC 2022 - mwilck@suse.com - Update to version 0.7.9+232+suse.cbc3754: * Fix multipathd authorization bypass and symlink attack (bsc#1202739 CVE-2022-41973 CVE-2022-41974) * add multipath-dracut.conf: dracut config file to install tmpfiles.d/multipath.conf in initramfs ------------------------------------------------------------------- Fri Aug 26 09:23:42 UTC 2022 - mwilck@suse.com - Update to version 0.7.9+229+suse.a7d71062: * Avoid linking to libreadline to avoid licensing issue (bsc#1202616) ------------------------------------------------------------------- Wed Jun 30 19:58:48 UTC 2021 - mwilck@suse.com - Update to version 0.7.9+208+suse.8c8dded: * libmultipath: use uint64_t for sg_id.lun (bsc#1187534) ------------------------------------------------------------------- Wed May 19 20:16:20 UTC 2021 - mwilck@suse.com - Update to version 0.7.9+207+suse.58b7a57: * Improve handling of changed WWIDs and temporary failure to obtain WWID. Option "disable_changed_wwids" is now ignored. (bsc#1184260) * enable negated regular expression syntax in conf file (bsc#1182917) * change default devnode blacklist to '!^(sd[a-z]|dasd[a-z]|nvme[0-9])' * Avoid "illegal request" errors on non-RDAC storage (bsc#1182072, bsc#1177371) * fixes for SAS expanders (bsc#1178377, bsc#1178379, bsc#1177081) ------------------------------------------------------------------ Mon Nov 23 21:29:49 UTC 2020 - Martin Wilck <mwilck@suse.com> - Missing bugref: Added hwtable entry for ETERNUS AHB (bsc#1174026) * This is fixed since 0.7.9+195+suse.16740c5 ------------------------------------------------------------------- Mon Nov 2 11:42:47 UTC 2020 - Martin Wilck <mwilck@suse.com> - Avoid reading files extensions other than ".conf" from config dir (bsc#1162896; added this note retroactively, it was already solved in multipath-tools-0.7.9+195+suse.16740c5). - Fix wrong usage of "%service_del_preun -n" in spec file (bsc#1178354) ------------------------------------------------------------------- Thu Sep 17 19:55:09 UTC 2020 - mwilck@suse.com - Update to version 0.7.9+195+suse.16740c5: - Added verifed bug fixes * kpartx: recognize DASD on loop devices again (bsc#1139775) * kpartx.rules: fix handling of synthetic uevents (bsc#1161923) * libmpathpersist: limit PRIN allocation length to 8192 bytes (bsc#1165786) * Fix handling of incompletely initialized udev devices (bsc#1172157) * avoid data corruption caused by duplicate alias in bindings file (bsc#1172429) * improve logging for failure to set dev_loss_tmo (bsc#1173060, bsc#1173064) * Fix handling of hardware properties for maps without paths (bsc#1176644) -- Backported upstream fixes (bsc#1176670): * multipath-tools: add HPE MSA 1060/2060 to hwtable * ALUA support for PURE FlashArray * libmultipath: EMC PowerMax NVMe device config * libmultipath: fix ALUA autodetection when paths are down ------------------------------------------------------------------ Fri Sep 06 09:37:59 UTC 2019 - mwilck@suse.com - Update to version 0.7.9+167+suse.07c42ab: * Fix premature path reinstantiation with san_path_err_XX (boo#1149319) ------------------------------------------------------------------- Wed Aug 21 14:10:02 UTC 2019 - Martin Wilck <mwilck@suse.com> - Set default for "enable_foreign" to "NONE" (bsc#1139837) * added libmultipath-set-enable_foreign-to-NONE-by-default.patch ------------------------------------------------------------------- Thu Aug 15 14:41:31 UTC 2019 - mwilck@suse.com - Update to version 0.7.9+166+suse.1693c88: * multipath.conf.5: document foreign library support * multipath.conf: add "enable_foreign" parameter (bsc#1139837) ------------------------------------------------------------------- Tue Jul 02 22:05:23 UTC 2019 - mwilck@suse.com - Update to version 0.7.9+164+suse.e41fbd9: * libmultipath: trigger uevents for partitions, too (bsc#1140146) ------------------------------------------------------------------- Tue Jul 2 15:39:38 UTC 2019 - Martin Wilck <mwilck@suse.com> - Spec file: backported some modernizations from Factory * Remove unused /var/cache/multipath directory * Remove check for multipath maps in %pre and %post * Remove SLE11-specific multipathd service stop / start from %pre / %post * Remove obsolete tools from package description (bsc#1129827) * Add -n to %service_del_{pre,post}un for multipathd.socket ------------------------------------------------------------------- Tue Jun 25 20:36:26 UTC 2019 - mwilck@suse.com - Update to version 0.7.9+163+suse.7993fed: * mpathpersist: optimize for setups with many LUNs (bsc#1134648) * mpathpersist: add option -f/--batch-file (bsc#1134648) * libmultipath: get_prio(): really don't reset prio for inaccessible paths (bsc#1118495) - Upstream bug fixes from dm-devel (bsc#1139369): * multipath: call store_pathinfo with DI_BLACKLIST * multipathd: fix REALLOC_REPLY with max length reply * libmultipath: make vector_foreach_slot_backwards work as expected * multipathd: fix client response for socket activation (bsc#1133861) - hwtable: add Lenovo DE series (bsc#1125507) ------------------------------------------------------------------- Thu May 02 12:45:32 UTC 2019 - mwilck@suse.com - Update to version 0.7.9+148+suse.5179c8d: * fix compilation of external programs with -lmultipath (bsc#1133957) ------------------------------------------------------------------- Tue Apr 30 19:45:32 UTC 2019 - mwilck@suse.com - Update to version 0.7.9+147+suse.689dcaf: * Avoid deadlock situation during udev settle (bsc#1131789, bsc#1125145) - multipath -u: test socket connection in non-blocking mode * Avoid device IO in "multipath -u" (bsc#1125145) * Fix priority handling for offline paths (bsc#1118495) * Fix daemon shutdown issues (bsc#1110060, bsc#1110439) - multipathd: protect all access to running_state - multipathd: allow shutdown during configure() ------------------------------------------------------------------- Thu Mar 14 10:39:49 UTC 2019 - Martin Wilck <mwilck@suse.com> - Disable kmod()-style dependencies for now (bsc#1119414) ------------------------------------------------------------------- Thu Mar 7 16:39:42 UTC 2019 - Martin Wilck <mwilck@suse.com> - Fix module name in multipath.conf (bsc#1119414) * The modules-load.d entry must match the filename exactly ------------------------------------------------------------------- Tue Mar 5 14:12:54 UTC 2019 - Martin Wilck <mwilck@suse.com> - Add kmod(xyz) style dependencies for SLE15-SP1 (jsc#SLE-3853, fate#326579, bsc#1119414) ------------------------------------------------------------------- Tue Mar 05 09:29:04 UTC 2019 - mwilck@suse.com - Update to version 0.7.9+128+suse.ae29865: - Bug fixes: * multipathd: Fix miscounting active paths (bsc#1125043) * multipathd: avoid null pointer dereference in LOG_MSG (bsc#1127873) * minor fixes suggested by coverity (bsc#1127879) ------------------------------------------------------------------- Fri Jan 11 20:39:36 UTC 2019 - Martin Wilck <mwilck@suse.com> - Add BuildRequires on suse-module-tools * we need it for regenerate_initrd_posttrans ------------------------------------------------------------------- Wed Jan 09 14:50:43 UTC 2019 - mwilck@suse.com - Update to version 0.7.9+111+suse.b4232b7: - merged upstream cb4a979a (SUSE bug fixes merged upstream, code-identical to previous release). ------------------------------------------------------------------- Tue Jan 08 23:26:41 UTC 2019 - mwilck@suse.com - Update to version 0.7.9+109+suse.203c1cf: * multipathd: avoid crash in cli_list_path (bsc#1121134) * libmultipath: fix compilation with older kernel headers (bsc#1121066) - merged upstream fb824725 * Improved NVMe support in both native and dm-mpath mode added basic NVMe ANA support (bsc#1119898, bsc#1118495) * Fix prio output in "multipathd show topology" (bsc#1119897) * multipathd: fix daemon not really shutdown (bsc##1110060, bsc#1110439) * setup_map: wait for pending path checkers to finish (bsc#1118224) ------------------------------------------------------------------- Fri Dec 14 10:36:39 UTC 2018 - mwilck@suse.com - Update to version 0.7.9+90+suse.f81e290: * libmultipath: Increase SERIAL_SIZE to 128 bytes (bsc#1107179) ------------------------------------------------------------------- Wed Dec 12 22:23:22 UTC 2018 - mwilck@suse.com - Update to version 0.7.9+89+suse.df77b66: - re-enable "san_path_err_xy" options These have been removed upstream, but they were supported in SLE-15/Leap15.0, so we can't simply throw them away. Improve documentation, mark them as deprecated, but keep the code in place. ------------------------------------------------------------------- Wed Dec 12 12:50:37 UTC 2018 - mwilck@suse.com - Update to version 0.7.9+85+suse.766b95e: * upstream patch series to make verbosity level 3 less verbose and thus better usable (bsc#1118937) * fix for handling device size mismatch in coalesce_paths() (bsc#1037379) * libmultipath: fix false removes in dmevents polling code (bsc#1116272) * Spec file: remove build dependency on dracut which causes build errors for some distributions ------------------------------------------------------------------- Mon Nov 26 16:44:31 UTC 2018 - mwilck@suse.com - Update to version 0.7.9+58+suse.0790830: * libmpathpersist: fix off-by-one error in PRIN length check (bsc#1099007) * multipathd: fix mpp->hwe handling when paths are freed (fix possible crash caused by new hardware table code) ------------------------------------------------------------------- Wed Nov 14 11:37:32 UTC 2018 - mwilck@suse.com - Update to version 0.7.9+55+suse.9fc8439: (note the "55" is due to former merge operations. We actually only have 7 patches on top of upstream. All other patches referenced below as "not upstream" have been merged). * Bump version to 0.7.9 * multipathd: reset delay_wait_checks counter on failure (bsc#1114771) * multipathd: fix irritating "minor number mismatch" message (bsc#1111116) * fix possible failure to shut down (bsc#1110060, bsc#1110439) * upstream "checker overhaul" - cleanups and improvements for path checkers * Upstream fixes for failures handling path initializiation * various small upstream bug fixes. ------------------------------------------------------------------- Wed Oct 03 11:49:47 UTC 2018 - mwilck@suse.com - Update to version 0.7.7+136+suse.19bb285: Bug fixes from upstream, and SUSE bug fixes * multipathd: try SCSI persistent reservations for SCSI only (bsc#1108875) * libmultipath: allow sysfs_pathinfo to return SKIPPED (bsc#1098458) * libmultipath: Fixup updating paths (bsc#1110418) * multipathd: fix memory leak on error in configure (bsc#1110418) * multipathd: minor fixes (bsc#1110418) * multipathd: function return value tweaks (bsc#1110418) * multipath: fix max array size in print_cmd_valid (bsc#1110418) * libmutipath: don't use malformed uevents (bsc#1110418) * libmultipath: fix null dereference int alloc_path_group (bsc#1110418) * libmultipath: fix memory issue in path_latency prio (bsc#1110418) * libmultipath: fix length issues in get_vpd_sgio (bsc#1110418) * multipathd: decrease log level of uevent messages (bsc#1110586) * multipathd: fix version check for DM_DEV_ARM_POLL ioctl (bsc#1110587) * libmultipath: pathinfo: skip hidden devices (bsc#1110586) * libmultipath: nvme: shorter topology output (bsc#1082419) * libmultipath: nvme: fix path detection for kernel 4.16 (bsc#1091112) * libmultipath: fix gcc 8.1 "truncated output" warnings (bsc#1099007) * (lib)mpathpersist: use O_RDONLY file descriptors (bsc#1093220) * libmpathpersist: fix byte swapping for big endian systems (bsc#1099036) * multipath-tools/tests: add tests for get_unaligned_beXX (bsc#1099036) * libmultipath: add (get|put)_unaligned_be64 (bsc#1099036) * libmpathpersist: fix stack overflow in mpath_format_readfullstatus() (bsc#1099007) * libmpathpersist: fix typo in mpath_format_readfullstatus (bsc#1099007) * libmpathpersist: remove duplicate test in readfullstatus (bsc#1099007) - Update to upstream 1a8625abd (0.7.7+82) * minor fixes for kpartx, found by coverity * mpathpersist: add --param-alltgpt option * libmultipath: add "protocol" blacklist option. * multipathd: add new wildcard "%P" for "protocol" * multipath-tools: fix products names in hwtable * libmultipath: more debug output in alua prioritizer (bsc#1080965) * libmultipath: alua: retry RTPG for NOT_READY and UNIT_ATTENTION (bsc#1080965) * libmultipath: alua_rtpg: use condlog for error messages (bsc#1080965) ------------------------------------------------------------------- Mon Jul 02 12:01:36 UTC 2018 - mwilck@suse.com - Update to version 0.7.7+75+suse.6287aef: Added minor updates from upstream * multipath-tools: add info about how to enable ALUA in ONTAP * multipath-tools: add directio path_checker for DASD devices * multipath-tools: make Product Name mandatory and add all of them Minor rebase, as some SUSE patches have been merged upstream (all mentioned in previous changelogs) ------------------------------------------------------------------- Fri Jun 29 07:57:45 UTC 2018 - mwilck@suse.com - Update to version 0.7.7+72+suse.4b24466: * multipath: fix return code handling in delegate_to_multipathd (bsc#1098177) * multipath: don't start multipathd unnecessarily (bsc#1098177) ------------------------------------------------------------------- Mon Jun 25 19:48:59 UTC 2018 - mwilck@suse.com - Update to version 0.7.7+70+suse.4a5941e: * libmultipath: change partition_delimiter default to "-part" (bsc#1073622, bsc#1056526) * change default for find_multipaths to "greedy" (bsc#1099054) * libmultipath: allow distributions to change partition_delim default (bsc#1073622, bsc#1056526) ------------------------------------------------------------------- Mon Jun 25 16:20:23 UTC 2018 - mwilck@suse.com - Update to version 0.7.7+67+suse.a7d1e14: - RBD/RADOS backend support has been removed upstream remove support for it in SUSE, too (boo#1099037, FATE#826853) * added Obsoletes: for multipath-tools-rbd. - libdmmp version has changed to 0.2.0 - New patches not yet upstream: (Wed Jun 12 2018: these are now upstream, since 0.7.8) * multipathd: fix mpp->hwe handling on path removal (boo#1099028) * libmultipath: print correct default for delay_*_checks (boo#1099026, bsc#1110418) * libmultipath: avoid error messages from RDAC check (bsc#1108728, bsc#1075539) * (lib)mpathpersist: use O_RDONLY file descriptors (bsc#1093220) * libmpathpersist: fix byte swapping for big endian systems (bsc#1099036) * multipath-tools/tests: add tests for get_unaligned_beXX (bsc#1099036) * libmultipath: add (get|put)_unaligned_be64 (bsc#1099036) * libmpathpersist: fix stack overflow in mpath_format_readfullstatus() (bsc#1099007) * multipathd: fix buffer size in cli_getprkey (bsc#1099028) * libmultipath: fix gcc 8.1 "truncated output" warnings (bsc#1099007) * libmpathpersist: fix typo in mpath_format_readfullstatus (bsc#1099007) * libmpathpersist: remove duplicate test in readfullstatus (bsc#1099007) - SUSE specific patches preserved: * multipath.rules: temporary rule to obtain ID_WWN for NVMe (bsc#1076828) * kpartx: create symlinks for dmraid devices (bsc#1064212) * multipath.conf.5: document no_partitons compat support (fate#323406) * libmultipath: compat support for 'features "1 no_partitions"' (fate#323406) * Added fossology assessment as README.licenses (bsc#1088801) - Dropped patches from previous factory/SLE15 release (0.7.3+69+suse.218a0d0): * libmultipath: don't [un]set queue_if_no_path after domap obsoleted by "libmultipath: cleanup features handling code" * multipath.rules: use -i flag to multipath obsoleted by path detection patch series * libmpathpersist: add support for prkeys file v3 obsoleted by "mpathpersist: Fix invalid condition check" * libmultipath: fix deadlock in tur.c obsoleted by "libmultipath: fix tur checker locking" * checkers/rbd: missing pthread_lock() on failure path obsolete because of RBD removal * libmultipath/hwtable: don't hard-code ALUA for IBM IPR obsoleted by "libmultipath: hwhandler auto-detection for ALUA" and "libmultipath: don't reject maps with undefined prio" (bsc#1085212, bsc#1075129) - Update to upstream version 0.7.7+50 (39ad8dc8) - rework of "find_multipaths" logic * find_multipaths can now be "strict", "yes", "no", "greedy", or "smart" * SUSE default is "greedy" for now, consistent with previous behavior * "multipath -u -i" not necessary in udev rules any more (removed SUSE patch "multipath.rules: use -i flag to multipath") - patch series for config file handling (bsc#1067789): * fix inconsistent handling of multiple config file entries matching the same device (bsc#1067789) * multipath: implement "multipath -T" (bsc#1067789) * multipathd: implement "show config local" (bsc#1067789) * libmultipath: merge "multipath" config sections by wwid * multipathd: add path format wildcard "%0" for failures * libmultipath: config parser: Allow '"' in strings - multipath-tools: foreign/NVME implementation (bsc#1082419) for native NVME multipath configurations - Other new upstream features: * mpathpersist: add all_tg_pt option * add polling dmevent handler (only one thread waiting for device-mapper events rather than one per map). * multipath: add "ghost_delay" parameter * "marginal path" path state checking for better handling of unstable "shaky" connections in a SAN. conf options "marginal_path_err_rate_threshold" etc, see man page. This replaces the previous "san_path_err_threshold" functionality. - Upstream bug fixes: * Man page corrections and improvements for multipath.conf(5) * libmultipath: fix memory leak in process_config_dir() (bsc#1110352) * multipath: don't check timestamps without a path * multipathd: handle errors in uxlsnr as fatal (bsc#1086025) * libmultipath: don't reject maps with undefined prio (bsc#1085212, bsc#1075129) * multipathd: fix reservation_key check (bsc#1099008) * 11-dm-mpath.rules: dont't run "multipath -U" during coldplug (bsc#1084748) * libmultipath: hwhandler auto-detection for ALUA (bsc#1085212, bsc#1075129) * multipath: fix rcu thread cancellation hang (bsc#1110418) * multipathd: register threads that use rcu calls (bsc#1110418) * multipathd: fix waiter thread cancelling * multipathd: use nanosleep for strict timing (avoids possible races with SIGALRM) * logging fixes: * libmultipath: fix log_pthread processing * libmultipath: set dm_conf_verbosity * libmultipath: fix basenamecpy * libmultipath: uev_update_path: update path properties * libmultipath: uev_update_path: always warn if WWID changed * libmultipath: get_uid: don't quit prematurely without udev (bsc#1108728) * libmultipath: get_uid: check VPD pages for SCSI only (bsc#1108728) * libmultipath: fix wrong output of "multipath -t" * Introduce the libmultipath/unaligned.h header file (bsc#1099036) * libmultipath: Fix sgio_get_vpd() (bsc#1099484) * kpartx: Improve reliability of find_loop_by_file() * libmultipath, alloc_path_with_pathinfo(): Ensure that pp->wwid is '\0'-terminated * libmultipath: enable feature disable changed wwid by default * multipathd: add lock protection for cli_list_status * bug fixes for "marginal path checker" * multipathd: fix signal blocking logic (bsc#1110060, bsc#1110439, bsc#1086025) * multipath-tools: add INSPUR/MCS to hardware table * multipath-tools: add RDAC SUN/ArrayStorage to hwtable * multipath-tools: remove DF arrays from HP * multipath: print sysfs state in fast list mode (bsc#1110354) * multipathd: remove coalesce_paths from ev_add_map * multipath: fix DEF_TIMEOUT use * libmultipath: fix tur checker locking * multipath-tools: handle exit signal immediately (bsc#1086025) * multipathd: release uxsocket and resource when cancel thread (bsc#1110355) * path latency prioritizer fixes * multipathd.service: set TasksMax=infinity (bsc#1060616) * multipathd.service: drop Before=lvm2-lvmetad.service (bsc#1070427) * multipathd.socket: add WantedBy=sockets.target * kpartx.rules: fix by-id/scsi-* for user_friendly_names * multipath -C: decrease log level * libmultipath: hwtable: no_path_retry="queue" for NetApp NVMe * libmultipath: hwtable: multibus for NetApp NVMe-FC * libmultipath: select ALUA prioritizer for RDAC arrays only (bsc#1075539, bsc#1081241) * libmultipath: get_vpd_sgio: support VPD 0xc9 (bsc#1055949) * libmultipath: condlog: log to stderr (bsc#1055949) * multipath: delegate dangerous commands to multipathdd (bsc#1047639) * libmultipath: don't try to set hwhandler if it is retained (bsc#1047639) * libmultipath: don't update path queueing on reload * multipathd: marginal path code fixes * multipath: check failed path dmstate in check_path * multipathd: clean up set_no_path_retry * multipathd: fix device creation issues * libmultipath: cleanup features handling code * multipath: fix hwhandler check in select_action * kpartx: don't delete partitions from partitions * limbultipath: prefer RDAC checker with detect_checker * multipath-tools: add AccelStor/NeoSapphire to hardware table * multipath-tools: add TMS/RamSan to hardware table * multipath-tools: add XIV/NEXTRA to hardware table * multipath-tools: add XIOtech/Magnitude to hardware table * libmultipath: ensure checker->fd == -1 if not set ------------------------------------------------------------------- Thu Apr 12 19:30:09 UTC 2018 - mwilck@suse.com - Update to version 0.7.3+69+suse.218a0d0: * multipath -ll: print foreign maps only with "-o" flag (bsc#1089353) * Revert "disable nvme foreign library" ------------------------------------------------------------------- Thu Apr 12 18:46:24 UTC 2018 - mwilck@suse.com - Update to version 0.7.3+67+suse.8f0c27b: * disable nvme foreign library (bsc#1089353) ------------------------------------------------------------------- Tue Apr 10 21:42:56 UTC 2018 - mwilck@suse.com - No functional changes - Fixed rpmlint warnings (bsc#1088946) * multipath-tools-devel: moved .so files to /usr/lib[64] * added version dependencies for -devel packages ------------------------------------------------------------------- Tue Apr 10 21:26:30 UTC 2018 - mwilck@suse.com - No functional changes * fixed SPDX syntax (and -> AND) * added /usr/share/licenses ------------------------------------------------------------------- Tue Apr 10 08:04:40 UTC 2018 - mwilck@suse.com< - No functional changes, just licenses - Spec file: fix %license tags and info after closer inspection (bsc#1088801) * kpartx is under GPL-2.0-only * rbd is under LGPL-2.1-only - Update to version 0.7.3+66+suse.dc5fe2d: Fix licensing info (bsc#1088801) * Added fossology assessment as README.licenses * multipath-tools: create LICENSES dir with the text of all used licences ------------------------------------------------------------------- Fri Apr 06 09:54:45 UTC 2018 - mwilck@suse.com - Update to version 0.7.3+61+suse.d4d0494: * 11-dm-mpath.rules: dont't run "multipath -U" during coldplug (bsc#1084748) ------------------------------------------------------------------- Wed Mar 28 20:31:51 UTC 2018 - mwilck@suse.com - Fixed license tags in spec file * multipath tools / libmultipath is GPL-2.0-only * libmpathcmd is LGPL-2.0-or-later * libdmmp is GPL-3.0-or-later * adopt SPDX format. ------------------------------------------------------------------- Wed Mar 28 20:01:01 UTC 2018 - mwilck@suse.com - Update to version 0.7.3+60+suse.46ac839: * libmultipath/hwtable: don't hard-code ALUA for IBM IPR (bsc#1085212, bsc#1075129) ------------------------------------------------------------------- Wed Mar 21 08:32:13 UTC 2018 - mwilck@suse.com - Update to version 0.7.3+59+suse.1b6191c26774: * libmultipath: don't reject maps with undefined prio (bsc#1085212, bsc#1075129) * multipathd: handle errors in uxlsnr as fatal (bsc#1086025) ------------------------------------------------------------------- Tue Mar 20 14:55:34 UTC 2018 - mwilck@suse.com - Update to version 0.7.3+57+suse.bb6be4c8b4ca: * multipathd: fix signal blocking logic (bsc#1086025) * multipath-tools: handle exit signal immediately (bsc#1086025) * multipath: fix DEF_TIMEOUT use (bsc#1086014) * multipath-tools: foreign/NVME implementation v2 (upstream accepted) (bsc#1082419) ------------------------------------------------------------------- Mon Feb 26 12:53:28 UTC 2018 - mwilck@suse.com - Update to version 0.7.3+53+suse.140f4937e9e7: * libmultipath: fix wrong output of "multipath -t" (bsc#1082835) ------------------------------------------------------------------- Thu Feb 22 20:40:42 UTC 2018 - mwilck@suse.com - Update to version 0.7.3+52+suse.08a969b7fce0: - Add limited support for displaying native NVMe multipath (bsc#1082419) * libmultipath: foreign/nvme: implement path display * multipathd: use foreign API * multipath: use foreign API * libmultipath/foreign: nvme foreign library * libmultipath/print: add "%G - foreign" wildcard * libmultipath: API for foreign multipath handling * libmultipath: print: use generic API for get_x_layout() * libmultipath: print: convert API to generic data type * libmultipath: "generic multipath" interface * libmultipath: add vector_convert() * libmultipath: add vector_free_const() * libmultipath: get rid of selector "hack" in print.c - Fix locking errors detected by coverity check (bsc#1082418) * checkers/rbd: missing pthread_lock() on failure path * libmultipath: fix deadlock in tur.c ------------------------------------------------------------------- Mon Feb 12 10:55:30 UTC 2018 - mwilck@suse.com - Fix whitespace in dracut conf file (bsc#1080562) ------------------------------------------------------------------- Tue Jan 30 20:00:31 UTC 2018 - mwilck@suse.com - Update to version 0.7.3+38+suse.a16beed5280a: * kpartx: don't delete partitions from partitions (bsc#1078362) * hwtable: add latest updates (bsc#1078363) * multipathd.service: set TasksMax=infinity (bsc#1060616) ------------------------------------------------------------------- Fri Jan 26 13:52:10 UTC 2018 - mwilck@suse.com - Update to version 0.7.3+31+suse.6804bb73f72d: * libmultipath: hwtable: no_path_retry="queue" for NetApp NVMe (bsc#1073319) ------------------------------------------------------------------- Fri Jan 19 18:09:52 UTC 2018 - mwilck@suse.com - Update to version 0.7.3+30+suse.6b5ed839: * multipath.rules: temporary rule to obtain ID_WWN for NVMe (bsc#1076828) * libmultipath: ignore natively multipathed NVME devices (bsc#1076828) * multipath.rules: handle NVME devices (bsc#1076828) * FIX "libmultipath: hwtable: multibus for NetApp NVMe-FC" (bsc#1073319) * libmultipath: increase path product_id/rev field size for NVMe (bsc#1073319) ------------------------------------------------------------------- Tue Jan 16 14:18:15 UTC 2018 - mwilck@suse.com - Update to version 0.7.3+25+suse.7c9920e2: * assemble_map: no newline at end of params string (bsc#1072253) ------------------------------------------------------------------- Thu Jan 11 12:38:41 UTC 2018 - mwilck@suse.com - Update to version 0.7.3+24+suse.703a61d5: * multipathd.service: drop Before=lvm2-lvmetad.service (bsc#1070427) * libmultipath: hwtable: multibus for NetApp NVMe-FC (bsc#1073319) * libmultipath/propsel: select ALUA prioritizer for RDAC arrays only (bsc#1075539, bsc#1081241) * libmultipath: get_vpd_sgio: support VPD 0xc9 (bsc#1055949) * libmultipath: sgio_get_vpd: add page argument (bsc#1055949) * libmultipath: fix return code of sgio_get_vpd() (bsc#1055949) ------------------------------------------------------------------- Fri Dec 22 20:19:40 UTC 2017 - mwilck@suse.com - Update to version 0.7.3+19+suse.0fd18bdd: * multipathd.socket: add WantedBy=sockets.target (bsc#1072253) ------------------------------------------------------------------- Fri Dec 22 17:21:57 UTC 2017 - mwilck@suse.com - Update to version 0.7.3+18+suse.8c97f433: * multipath -C: decrease log level (bsc#1072504) ------------------------------------------------------------------- Fri Dec 22 16:30:47 UTC 2017 - mwilck@suse.com - Update to version 0.7.3+17+suse.cac42e6f: * test-kpartx: add test for mapping without UUID (bsc#1074013) ------------------------------------------------------------------- Wed Nov 29 21:41:37 UTC 2017 - mwilck@suse.com - Update to version 0.7.3+15+suse.570d5938: * kpartx.rules: fix by-id/scsi-* for user_friendly_names (bsc#1066893) ------------------------------------------------------------------- Mon Nov 20 17:59:50 UTC 2017 - mwilck@suse.com - Update to version 0.7.3+14+suse.da06e7f3: * libmultipath: fix return code of sysfs_get_timeout (bsc#1069037) ------------------------------------------------------------------- Mon Nov 6 14:46:03 UTC 2017 - mwilck@suse.com - added sample code for libmpathpersist (bsc#1066376) * added libmpathpersist-example.c - multipath-tools.spec: package libmultipath.so symlink in -devel package (bsc#1066376). We *do not* package header files for libmultipath, as the APIs are not public. ------------------------------------------------------------------- Fri Nov 3 09:57:57 UTC 2017 - mwilck@suse.com - multipath-tools.spec: package *.so symlinks in -devel pkgs (bsc#1066376) - multipath-tools.spec: SLE15: add RADOS support for s390x (bsc#1066380) - Fix build error for targets SLE_12, SLE_12_SP1 (bsc#1066392) ------------------------------------------------------------------- Thu Oct 26 17:19:39 UTC 2017 - mwilck@suse.com - Update to version 0.7.3+13+suse.db431514080f: * kpartx: create symlinks for dmraid devices (bsc#1064212) * limbultipath: prefer RDAC checker with detect_checker (bsc#1055949) ------------------------------------------------------------------- Tue Oct 17 08:54:25 UTC 2017 - hare@suse.com - Update to version 0.7.3+11+suse.4de08d96: * libmultipath: condlog: log to stderr (bsc#1063059) ------------------------------------------------------------------- Thu Sep 21 12:32:25 UTC 2017 - mwilck@suse.com - Update to version 0.7.3+10+suse.70ccb55b0439: - Rebase to upstream release 0.7.3 * libmultipath: add pthread_cleanup hook for udev monitor * libmultipath: pull functions into util.c * libmultipath: change reservation_key to a be64 * libmpathpersist: fix update_prflag code * multipath: add alternate reservation_key method * mpathpersist: add support for prkeys file * multipath-tools: minor edition and corrections in multipath.conf.5 * multipath-tools: fix incorrect length for strncmp in uevent.c * multipath-tools: clarify how to dump the multipathd config * multipath-tools: replace "setting: array" with "setting: storage device" at multipath output * libmultipath: sanitize fd handling * multipath-tools: link internal libraries before foreigns * multipath-tools: remove Sun StorEdge T4(6020,6120,6320) arrays from hwtable * multipath-tools: add support for all arrays from Sun StorEdge 3000 family * multipath-tools: add Xiotech iglu blaze arrays to hwtable * multipath-tools: add Dot Hill/Seagate arrays to hwtable * libmultipath: update INFINIDAT builtin config * multipath-tools: add info about adding new hardware * multipath-tools: Remove the limitation of IPC command reply length. * multipath-tools: libdmmp: Improve timeout mechanism * multipath-tools: libdmmp: New function to flush and reconfig * Bump version to 0.7.3 - minor fixes for upstream 0.7.3 * libmultipath: ensure checker->fd == -1 if not set * libmpathpersist: add support for prkeys file v3 * multipath: add man page info for my prkey changes - Patch series for NVMe discovery and failover (bsc#1038865, bsc#1057820) * discovery: sanitize NVMe discovery * libmultipath/discovery: modify NVMe path states * Add 'none' checker * hwtable: set 'none' as default checker for NVMe ------------------------------------------------------------------- Mon Sep 18 21:15:09 UTC 2017 - mwilck@suse.com - Update to version 0.7.2+49+suse.993a29b1188d: * Revert "11-dm-mpath.rules: Remember DM_ACTIVATION" (boo#1059227) * Revert "11-dm-mpath.rules: don't set READY->ACTIVATION" (boo#1059227) * multipath: delegate using libmpathcmd (bsc#1047639) ------------------------------------------------------------------- Mon Sep 18 20:44:02 UTC 2017 - mwilck@suse.com - split off rados support into separate multipath-tools-rbd package. This avoids pulling in the whole rados/ibverbs/rdma stack with multipath-tools. (bsc#1058504). - multipath-tools-rbd is Recommended but not Required by multipath-tools. ------------------------------------------------------------------- Sat Sep 02 21:38:13 UTC 2017 - mwilck@suse.com - Update to version 0.7.2+44.3a8d750c: Misc bug fixes: * multipathd: don't flood system with sd_notify calls (bsc#1056011) * libmultipath: add_feature: skip pointless NULL check (bsc#1055635) * libmultipath: add_feature: allow only 1 feature (bsc#1055635) * multipath: delegate dangerous commands to multipathd (bsc#1047639) * libmultipath: fix partition_delimiter config option (bsc#1056526) * kpartx: helper functions for name and uuid generation (bsc#1056508) * kpartx: search partitions by UUID, and rename (bsc#1056508) * kpartx: fix a corner case when renaming partitions (bsc#1056508) * kpartx: -d must work with empty partition table (boo#1056599) * kpartx: only recognize dasd part table on DASD (boo#1056599) Rework of the udev rules related to multipath and kpartx (bsc#1054363): * libmultipath: support MPATH_UDEV_NO_PATHS_FLAG on map creation * libmultipath: add get_udev_device * libmultipath: get_refwwid: use get_udev_device * libmultipath: use const char* in some dm helpers * libmultipath: add DI_NOIO flag for pathinfo * libmultipath: add dm_get_multipath * multipath: implement "check usable paths" (-C/-U) * 11-dm-mpath.rules: multipath -U for READY check * 11-dm-mpath.rules: import more ID_FS_xxx vars from db * 11-dm-mpath.rules: no need to test before IMPORT * 11-dm-mpath.rules: handle new maps with READY==0 * 11-dm-mpath.rules: don't set READY->ACTIVATION * 11-dm-mpath.rules: Remember DM_ACTIVATION * multipath.rules: set ID_FS_TYPE to "mpath_member" * kpartx.rules: don't rely on DM_DEPS and DM_TABLE_STATE * kpartx.rules: respect DM_UDEV_LOW_PRIORITY_FLAG * kpartx.rules: improved logic for by-uuid and by-label links * kpartx.rules: create by-partuuid and by-partlabel symlinks * kpartx.rules: generate type-name links only for multipath devices * kpartx.rules: fix logic for adding partitions * multipath/kpartx rules: avoid superfluous scanning * kpartx/del-part-nodes.rules: new udev file * kpartx.rules: move symlink code to other files - multipath-tools.spec: * added 68-del-part-nodes.rules to support partition deletion * added 00-dont-del-part-nodes.rules to disable partition deletion by default on openSUSE/SLES for now. * added 11-dm-parts.rules to kpartx package * added dracut.conf file to make sure 11-dm-parts.rules is included in initrd ------------------------------------------------------------------- Mon Aug 14 21:22:38 UTC 2017 - mwilck@suse.com - Update to version 0.7.2+14+suse.5721c345: * cli_add_map: Use CMD_NONE (bsc#1053515) * multipath-tools: link internal libraries before foreigns (bsc#1028132) * multipathd daemon: Fix incorrect use of CLOCK_MONOTONIC in pthread (bsc#1053757) ------------------------------------------------------------------- Fri Aug 11 21:41:43 UTC 2017 - mwilck@suse.com - Update to version 0.7.2+11+suse.448921a2: * multipath.conf.5: document no_partitions compat support * libmultipath: fixup compat support for 'features "1 no_partitions"' ------------------------------------------------------------------- Fri Aug 11 12:40:17 UTC 2017 - mwilck@suse.com - Dropped 67-kpartx-compat.rules (SUSE legacy). * symlinks "/dev/mapper/${UUID}_part${X}" are not created any more, only "/dev/mapper/${UUID}-part${X}" (with "minus") - Dropped automatic kpartx invocation on dmraid devices (fate#323743) - Rebase to upstream multipath-tools 0.7.2: * libmultipath: retain_attached_hw_handler obsolete with 4.3+ * multipath-tools: move up TEMPLATE in hwtable * multipath-tools: delete libdmmp/docs/man directory in make clean * libmultipath: fix unit to seconds in log message for checker timeout * multipath-tools: add HPE StoreVirtual 3200 family to hwtable * multipath-tools: add HPE MSA 2050/2052 to hwtable * multipath-tools: add/change fujitsu arrays * multipath-tools: check sysfs path state for NVMe/NVMf * multipath-tools: sync third-party headers with 3.13 upstream * multipath-tools: beautify path_latency.c code * multipath-tools: fix format in multipath.conf.5 * libmultipath: update 3PARdata builtin config * Bump version to 0.7.2 - Update to version 0.7.2+8+suse.95e8f43e: * libmultipath: don't try to set hwhandler if it is retained (bsc#1037533) * libmultipath: don't [un]set queue_if_no_path after domap * kpartx/devmapper.h: remove dm_no_partitions * libmultipath: compat support for 'features "1 no_partitions"' (fate#323406) * kpartx.rules: respect DM_UDEV_LOW_PRIORITY_FLAG (bsc#1047180) * kpartx.rules: Use DM_ACTIVATION as condition (fate#323406) * kpartx.rules: skip creating by-uuid and by-label links (fate#32340) ------------------------------------------------------------------- Thu Jul 20 08:01:22 UTC 2017 - mwilck@suse.com - Update to version 0.7.1+69+suse.3bfa5af1: * Merge branch 'sles12-sp3-fixes' into sles12-sp3 * libmultipath: get_udev_uid: make sure pp->wwid is 0-terminated (bsc#1048146) * libmultipath: drop uevent_can_discard_by_devpath (bsc#1048052) * libmultipath: only listen for uevents with DEVTYPE=disk (bsc#1048052) * libmultipath: fix over-long NVME WWIDs (bsc#1048146) ------------------------------------------------------------------- Tue Jun 27 18:28:05 UTC 2017 - mwilck@suse.com - Update to version 0.7.1+64+suse.aabe8c87: * Updated "no_path_retry" patchset to v4 (minor change) * kpartx.rules: Fix syntax error in skip_kpartx code (bsc#1046092) - _service: use "match-tag" to refer only to offical tags ------------------------------------------------------------------- Wed Jun 21 20:41:18 UTC 2017 - mwilck@suse.com - Update to version 0.7.1+62+suse.62a2c36e: * kpartx: only check for 'no_partitions' feature on dm devices (bsc#1037533) * Revert "kpartx: use mapname if no uuid is present" (bsc#1037533, bsc#1033541) - "no_path_retry" patch series (bsc#1043027) * libmultipath: load_config: skip setting unnecessary defaults * libmultipath: add/remove_feature: use const char* for feature * libmultipath: clarify option conflicts for "features" * libmultipath: merge_hwe: fix queue_if_no_path logic * libmultipath: assemble_map: fix queue_if_no_path logic * multipath.conf.5: document no_path_retry vs. queue_if_no_path * multipath.conf.5: Remove ??? and other minor fixes * libmultipath: add deprecated warning for some features settings - _service: Use "sles12-sp3" branch as revision, as factory and SLE12-SP3 submissions are in sync. Will be changed when factory forks off (latest at SLE12-SP3 GA). ------------------------------------------------------------------- Tue Jun 20 06:57:53 UTC 2017 - bwiedemann@suse.com - set KBUILD_BUILD_TIMESTAMP to generate reproducible man-pages to fix build-compare (bsc#1045111) ------------------------------------------------------------------- Wed Jun 14 08:58:23 UTC 2017 - mwilck@suse.com - Update to version 0.7.1+53+suse.07c2f6ac - kpartx patch series from upstream (bsc#1037533, bsc#1033541) * kpartx: only check for 'no_partitions' feature on dm devices * kpartx: test-kpartx: new unit test program * kpartx: remove is_loop_device * kpartx: relax and improve UUID check in dm_compare_uuid * kpartx: dm_remove_partmaps: support non-dm devices * kpartx: dm_devn: return error for non-existent device * kpartx: don't treat multi-linear mappings as partitions * libmultipath: don't treat multi-linear mappings as partitions * kpartx: use partition UUID for non-DM devices * kpartx: use absolute path for regular files * kpartx: find_loop_by_file: use sysfs * kpartx: include sys/sysmacros.h * Revert "kpartx: relax check when checking for a kpartx device" - Spec file: use new build flag for libdmmp installation (bsc#1036652), enabled by upstream fix: * libdmmp: enable library installation in alternative directory - Other bug fixes from upstream: * libmultipath: print.c: make sure lines are 0-terminated (bsc#1038865) * multipath-tools: fix compilation with gcc < 4.9 * kpartx: fix device checks * mpath_persist: Don't join threads that don't exist * libmultipath: fix suspended devs from failed reloads * mpathpersist: fix one more crash possiblity - Minor upstream changes: * multipath: Merge the DELL MD3xxx device configs * multipath: fix up position independent code * libmultipath: fix partition detection (bsc#1037533) * kpartx: default to running in sync mode * libmultipath: force udev reloads * libmultipath: print alias with no_path_retry message * multipathd: force reload device on all resizes * libmultipath: refactor calls to get dm device info * multipath-tools: document uid_attribute for NVME devices * Makefile: Remove assignments to unused variables * libmultipath/configure.h: Add a forward declaration * libmpathpersist: Add two missing #include directives * Remove mpath_reverse_8bytes_order() * Move the declaration of mpath_mx_alloc_len to a header file * Remove a superfluous "extern" keyword * mpathpersist.8: add missing documentation for -K, -C, -l --------------------------------------------------------------------- Thu Apr 27 18:15:26 UTC 2017 - mwilck@suse.com - spec file: Disable RADOS support for i586 on Leap 42.x (bsc#1036271) - spec file: Move libdmmp to /usr/lib[64] (bsc#1036652) - Update to version 0.7.1+7+suse.3edc5f7d: * kpartx: use mapname if no uuid is present (bsc#1033541) * kpartx: relax check when checking for a kpartx device (bsc#1033541) * libmpathpersist: use extern struct udev (bsc#1027188) * kpartx: include sys/sysmacros.h (fix compilation warning) - Update to upstream version 0.7.1: * multipath-tools: improve processing efficiency for addition and deletion of multipath devices * uevent_can_discard: optimize devpath check * multipathd: fix SIGUSR2 handling * multipath-tools: clean up libdmmp/Makefile * multipath-tools: libdmmp: Fix incorrect use of __attribute__ * multipath-tools: Remove trailing whitespaces * multipath-tools: add missing "-l" flag for pthread in libdmmp/Makefile * multipath-tools: build objects for libdmmp and libmpathpersist independently * libdmmp: minor Makefile cleanup * multipath-tools: remove incdir from Makefiles * libdmmp: don't disconnect from multipathd twice * multipathd: don't call strlen on NULL variables * libdmmp: move libdmmp.pc install location * multipathd: drop lock before calling uev_add_path * multipathd: allow devices to switch from RW to RO * libmultipath: don't set max_sectors_kb on reloads * Remove a trailing tab * multipath: fix segfault with disable_changed_wwids * multipath-tools: amend text from multipath/multipath.conf.5 * Bump the version code and date * multipath-tools: replace multipath configuration output * Revert "multipathd: set timeout for CLI commands correctly" * libmultipath: fix skip_kpartx support for removing maps * Bump version to 0.7.1 ------------------------------------------------------------------- Fri Mar 24 09:59:17 UTC 2017 - mwilck@suse.com - spec file changes suggested by factory review team (bsc#1030699) * RPM group adjustments. * Avoid %__ macro indirections ------------------------------------------------------------------- Thu Mar 23 13:23:01 UTC 2017 - mwilck@suse.com - Enable rados for SLES only for x86_64 and aarch64 (ceph is currently disabled on SLES on s390x and ppc64le) (bsc#1030699) - Downgrade to version 0.6.4+103+suse.bcb5d0f4: * temporarily remove commit "multipathd: fix SIGUSR2 handling" until it's merged in official repo (bsc#1030699) ------------------------------------------------------------------- Tue Mar 21 11:49:06 UTC 2017 - mwilck@suse.com - Spec file: disable librados for architectures for which ceph is not built - Spec file: enable librados by default for SLES12 SP3, disable it on Leap <= 42.1 - Update to version 0.6.4+104+suse.ac0df678: * multipathd: fix SIGUSR2 handling ------------------------------------------------------------------- Fri Mar 10 13:04:05 UTC 2017 - mwilck@suse.com - Update to version 0.6.4+103+suse.bcb5d0f4: * changed to official github repo openSUSE/multipath-tools (no changes code-wise) ------------------------------------------------------------------- Fri Mar 10 11:23:40 UTC 2017 - mwilck@suse.com - Spec file: Added dependency on sg3_utils (boo#1028857) ------------------------------------------------------------------- Wed Mar 01 15:43:09 UTC 2017 - mwilck@suse.com - spec file changes: optional librados and libdmmp support * enabled by default on Factory and Leap (disable with --without-rados, --without-libdmmp) * disabled by default on SLES12 (enable with --with-rados, --with-libdmmp) * libdmmp0_1_0 and libdmmp-devel as separate packages * minor fixes for RPMLINT warnings - Update to version 0.6.4+102.0119472d: * rebased, code-wise identical to previous checkout ------------------------------------------------------------------- Tue Feb 28 11:26:01 UTC 2017 - mwilck@suse.com - Update to version 0.6.4+102.df7d367e: * libmultipath/propsel: Do not select sysfs prioritizer for RDAC arrays (bsc#1004858) ------------------------------------------------------------------- Tue Feb 28 10:29:31 UTC 2017 - mwilck@suse.com - Update to version 0.6.4+101.f01ef4da (SLES12 SP2 changes wrt upstream): * Make libdmmp build optional * multipath.rules: use -i flag to multipath * kpartx: create symlinks for dmraid devices * kpartx: Add udev compability rules for SUSE * libmultipath/checkers: make RADOS checker optional * multipathd: fixup check for new path states (bsc#1019798) * tur: Add pthread_testcancel() (bsc#101979) * kpartx: sanitize delete partitions (bsc#100869) * libmultipath: coalesce_paths: trigger uevent if nothing done (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: differentiate ACT_NOTHING and ACT_IMPOSSIBLE (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: reload map if not known to udev (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: sysfs_attr_set_value: use const char* (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: select_action: check special features separately (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: disassemble_map: treat aminio like assemble_map does (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: disassemble_map: skip no_path_retry check (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: setup_feature: handle "retain_attached_hw_handler" (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: setup_feature: print log msg if no_path_retry cant be set (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: setup_features: log msg if queue_if_no_path is ignored (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * multipathd: use weaker "force_reload" at startup (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * multipathd: imply -n if find_multipaths is set (bsc#1012910) * multipath: ignore -i if find_multipaths is set (bsc#1012910) * libmultipath: move suspend logic to _dm_flush_map (bsc#986838) * multipath -ll: set DI_SERIAL (bsc#991432) * libmultipath: use existing alias from bindings file (bsc#1005255) * libmultipath/discovery: do not cache 'access_state' sysfs attribute (bsc#1004858) * multipathd: issue systemd READY after initial configuration (bsc#1006469) * multipath: avoid crash when using modified configuration (bsc#1000914) * multipathd: Set CLI timeout correctly (bsc#999061) * libmultipath: Do not crash on empty features (bsc#994812) * libmultipath: fall back to search paths by devt (bsc#995645) * multipathd: set timeout for CLI commands correctly (bsc#999061) * Invalid error code when using multipathd CLI * multipath: do not check daemon from udev rules (bsc#986734) * Add support for "multipath=off" and "nompath" on kernel cmdline * multipathd: start daemon after udev trigger (bsc#98673) * multipathd.service: fixup Wants= and Before= statements (bsc#1019181, bsc#991742, bsc#986734) - Update to current upstream (0.6.4-65-ga2675025) * Avoid that reloading a map sporadically triggers I/O errors * fix udev rules for failed multipath devices * multipathd: allow resetting stats * multipathd: add messages on delayed path addition * multipathd: don't update priority of failed paths * libmultipath: cleanup orphan device states * libmultipath: add detect_checker option * kpartx: don't keep creating recursive partitions * multipath-tools: Introducing multipath C API * multipath-tools: sync valgrind.h with 3.12 upstream * multipath-tools: add availability of service-time and queue-length to multipath.conf.5 * multipath-tools: add availability of service-time and queue-length to multipath.conf.5 * Fill NVMe specific path info * Don't blacklist nvme * multipath-tools: fix misspellings * multipath-tools: git should ignore rej and orig files * Include sys/sysmacros.h * Tolerate modprobe failures in multipathd.service * multipath-tools: Remove trailing and leading whitespaces * multipath-tools: Perform socket client uid check on IPC commands. * multipath-tools: Set errno mpath_recv_reply() when failure * multipath-tools: New way to limit the IPC command length. * multipath-tools: libmultipath: Removed unused functions. * multipath-tools: libmultipath: fix gcc link failure on rcu_register_thread_mb. * multipath-tools: multipathd: Fix memory leak on load_config(). * [multipathd] Remove trailing whitespaces * multipathd: deterministic io throughput in multipath ------------------------------------------------------------------- Sat Feb 18 22:04:25 UTC 2017 - kukuk@suse.com - Remove superfluous PreReq for insserv and fillup ------------------------------------------------------------------- Thu Sep 29 06:04:00 UTC 2016 - mwilck@suse.com - Update to version 0.6.2+suse20160928.8939fb6 ------------------------------------------------------------------- Thu Sep 29 08:03:04 CEST 2016 - hare@suse.de - Implement support for 'multipath=off' and 'nompath' kernel commandline options (bsc#1001691) ------------------------------------------------------------------- Wed Sep 28 13:26:55 CEST 2016 - hare@suse.de - multipath: avoid crash when using modified configuration (bsc#1000914) ------------------------------------------------------------------- Mon Sep 19 10:55:20 CEST 2016 - hare@suse.de - libmultipath: Do not crash on empty features (bsc#994812) - multipathd: Set CLI timeout correctly (bsc#999061) - Moved multipath-tools repository to github.com:/openSUSE/multipath-tools.git ------------------------------------------------------------------- Thu Sep 8 14:23:16 CEST 2016 - hare@suse.de - Fixup glitch from patch 'fixup check from udev rules' (bsc#986734) - Remove 0001-libmultipath-fall-back-to-search-paths-by-devt.patch; integrated into git repository ------------------------------------------------------------------- Mon Aug 29 10:32:36 UTC 2016 - jthumshirn@suse.com - libmultipath: fall back to search paths by devt (bsc#995645) ------------------------------------------------------------------- Fri Aug 26 18:52:03 CEST 2016 - hare@suse.de - Fixup module name in /usr/lib/modules-load.d (bsc#986734) ------------------------------------------------------------------- Fri Aug 26 09:10:50 CEST 2016 - hare@suse.de - multipath: fixup check from udev rules (bsc#986734) ------------------------------------------------------------------- Wed Aug 24 12:58:32 CEST 2016 - hare@suse.de - multipathd: start daemon after udev trigger (bsc#986734) - Load device handler and multipath module at boot (bsc#991634) ------------------------------------------------------------------- Fri Aug 19 15:28:48 CEST 2016 - hare@suse.de - Do not check daemon from udev rules (bsc#986734,bsc#990538) ------------------------------------------------------------------- Fri Aug 5 09:02:21 CEST 2016 - hare@suse.de - Include fixes from upstream: * memory leak in orphan_paths * More hardware table cleanups * Add 'serial' keyword to weightedpath prioritizer - Set timeout for CLI commands correctly (bsc#990265) - Start daemon after udev trigger (bsc#991742,bsc#986734,bsc#990538) - multipathd.service: Fixup Wants= and Before= statements (bsc#991742, bsc#986734) ------------------------------------------------------------------- Thu Jul 28 15:57:12 CEST 2016 - hare@suse.de - Include patches from upstream: * Cleanup hardware tables by removing default entries * More formatting fixes * Order keywords in multipath.conf.5 * Change default pgpolicy from 'failover' to 'group_by_prio' * kpartx: Fix check whether to detach a loop device * Fix partly traversed loop in coalesce_paths() * Fix memory leak in reconfigure() * Cleanup include header files * Bump version code to 0.6.2 - Fix multipath -l <devmap> without output (bsc#990480) - Fix spelling in a log message - Fix type of rcu_unregister() - Do not perform POSIX mutex operations inside a signal handler - Ensure that signals are delivered to the uxsock thread - Fix memory leak in path group policies - Update tarball to 0.6.2+suse20160728.d96f423 ------------------------------------------------------------------- Fri Jul 15 10:46:34 CEST 2016 - hare@suse.de - Include patches from upstream: * Makefile cleanup * Update multipath.conf.5 * Update hardware tables * Whitespace cleanup - Fixup crash during shutdown (bsc#988539) - Update tarball to 0.6.1+suse20160715.3d44636 ------------------------------------------------------------------- Mon Jul 4 22:30:43 UTC 2016 - jengelh@inai.de - Remove obsoletes spec sections ------------------------------------------------------------------- Mon Jul 4 09:47:21 CEST 2016 - hare@suse.de - Move config accesses to use user-space RCU (bsc#987526) * Revert 'move filter_devnode under vector lock' * Revert the rework patch - Include patches from upstream: * Update hardware tables * Update kpartx manpage * Whitespace fixes * Include coverity fixes * Drop AUTHOR file - Update tarball to 0.6.1+suse20160704.6e52398 ------------------------------------------------------------------- Wed Jun 8 08:33:48 UTC 2016 - lnussel@suse.de - fix service file to not pretend that this is the upstream version. Now labeled 0.6.1+suse20160603.9b920e3 - Fix BuildRequire to get systemd.pc from correct package (bsc#983167) - point rcmultipathd to /usr/sbin/service to avoid dangling symlink warning ------------------------------------------------------------------- Fri Jun 3 08:58:52 CEST 2016 - hare@suse.de - Rework patch 'move filter_devnode under vector lock' (bsc#982348) ------------------------------------------------------------------- Mon May 30 08:52:53 CEST 2016 - hare@suse.de - multipathd: Fixup definition of set_unlocked_handler_callback() - mpathcmd.h: Update Free Software Foundation address ------------------------------------------------------------------- Fri May 27 10:02:28 CEST 2016 - hare@suse.de - Do not install header file with mode 755 ------------------------------------------------------------------- Wed May 25 17:20:32 CEST 2016 - hare@suse.de - Update to latest upstream version 0.6.1 * Merge suse-specific patches * Drop multipath.conf.* files * Update to version 0.6.1 * multipathd: move 'filter_devnode' under vector lock * libmultipath: use poll() in uevent_listen() * Increase kpartx retries * Merge Dell MD3XXX hardware table entries * multipathd: Add 'sysfs' prioritizer (bsc#927040) * libmultipath: call get_vpd_uid() if no uid_attribute is set * multipathd: update defaults ------------------------------------------------------------------- Fri May 6 15:18:22 CEST 2016 - hare@suse.de - Update to latest upstream version 0.6.0 (FATE#319406) * Update documentation * Fix memory leak and segfault in reconfigure * Add wwn keyword to weightedpath prioritizer * Use 64-bit int for command key * check partions unused before removing * print 'fail' when remove fails * add exclusive_pref_bi for alua prioritizer * kpartx: verify parition devices * multipathd: delay reloads during creation * Cut down alua prioritizer ioctls * Add 'ignore_new_boot_devs' option * Add libmpathcmd library and use it internally * retrigger uevents to try and grab uid * Update to version 0.6.0 ------------------------------------------------------------------- Fri Apr 15 12:45:41 CEST 2016 - hare@suse.de - Port to latest upstream version (FATE#319406, FATE#320255) * kpartx: support device names with spaces * add raw format multipathd commands * make kpartx -d remove all partitions * Add find_multipaths option * Autodetect ALUA CLARiiON configurations * Delayed path reintegration * enable configuration directory * read-only bindings * Add deferred_remove support * correctly set partition delimiter on rename * Add overrides section to multipath.conf * Add additional path wildcards * Add force_sync option * Misc small patches ------------------------------------------------------------------- Thu Mar 24 09:49:45 CET 2016 - hare@suse.de - multipathd: do not flush maps on startup - Use find_path_by_dev() where possible (bsc#924316) - Fixup error return in store_path() (bsc#972329) - Do not display message 'invalid fd' ------------------------------------------------------------------- Tue Mar 8 10:57:07 CET 2016 - hare@suse.de - Fixup overzealous warning 'empty device number' (bsc#969857) ------------------------------------------------------------------- Wed Feb 17 15:53:26 CET 2016 - hare@suse.de - multipathd: fixup signal handling (again) - Revert 'trigger all devices on startup' - multipathd: print error message for invalid arguments - multipathd: block checkerloop during reconfiguration (bsc#946658) - libmultipath: correctly initialize pp->sg_id - multipathd: don't buffer output with systemd (bsc#954726) - multipath.rules: Do not forward partition events (bsc#954726) - libmultipath: improve uxlsnr handling (bsc#954726) - multipathd: do not realloc memory in uxlsnr (bsc#954726) - libmultipath: call get_uid() for all paths (bsc#935312) - multipathd: Do not print misleading message 'not found in pathvec' - multipathd: Do not update the paths vec when removing paths - multipathd: Do not switch paths on empty multipath tables (bsc#956349) - libmultipath: remove 'get_info' argument for adopt_paths() - libmultipath: ensure 'dev_t' is set when store paths (bsc#924316) - libmultipath: Do not store paths with empty dev_t (bsc#924316) - libmultipath: Do not store paths with empty device name (bsc#924316) - libmultipath: sysfs_set_rport_tmo still wrong (bsc#926588) - Add LIO-ORG/SUSE RBD backend hardware defaults (bsc#947845) - multipath: Reset alias if renaming fails (bsc#943157) ------------------------------------------------------------------- Fri Nov 6 13:35:22 CET 2015 - hare@suse.de - Fixes for md_monitor on zFCP (FATE#319070): * strict loop timings * multipathd: fixup a crash when invoking CLI commands * multipathd: implement 'show map $map format $format ------------------------------------------------------------------- Tue Aug 25 11:58:21 CEST 2015 - hare@suse.de - Fixup hang in 'multipath -f' (bsc#941954) ------------------------------------------------------------------- Mon Aug 3 11:48:54 CEST 2015 - hare@suse.de - Create package for SLE12-SP1. * Remove multipath-tools-0.5.0-sles12.diff.bz2 * Add multipath-tools-0.5.0-sles12-sp1.diff.bz2 - kpartx: parse emulated DASD devices - multipathd: Fixup queueing mode in 'show maps status' (bsc#933885) - multipathd: Accept zero-sized paths in ev_add_path - Always set DM_UDEV_DISABLE_LIBRARY_FALLBACK (bsc#933282) - libmultipath: Fixup 'DM_DEVICE_RELOAD' handling (bsc#933282) - libmultipath: correctly display checker status ------------------------------------------------------------------- Wed Apr 8 11:00:43 CEST 2015 - hare@suse.de - Remove 'udev_sync' argument from dm_simplecmd (bsc#903001) - Ensure multipathd is started before systemd-udev-trigger ------------------------------------------------------------------- Tue Apr 7 10:18:24 CEST 2015 - hare@suse.de - Only import ID_FS_XXX variables if not set (bsc#909358) - Fixup regular expression for HP MSA 2040 (bsc#920189) ------------------------------------------------------------------- Wed Mar 18 12:53:32 CET 2015 - hare@suse.de - Add dependency on systemd-udevd.service (bsc#903001) - Use ALUA for HP 3PAR (bsc#922105) - Add DX8700 S3 and DX8900 S3 defaults (bsc#921703) - Load all device handler modules on startup (bsc#908529) ------------------------------------------------------------------- Fri Mar 13 13:59:19 CET 2015 - hare@suse.de - libmultipath: make vpd page 0x80 optional (bsc#917963) - Add HP MSA 2040 to the hardware table (bsc#920189) - Revert 'Skip unhandled device types' (bsc#917701) ------------------------------------------------------------------- Thu Jan 29 13:02:08 CET 2015 - hare@suse.de - skip uninitialized devices during reconfiguration (bnc#908915) - memory overflow when printing help text (bnc#909742) ------------------------------------------------------------------- Tue Dec 16 11:54:47 CET 2014 - hare@suse.de - Do not automatically fall back to vpd uid generation - Improve vpd parsing - multipathd: trigger all devices on startup (bnc#901465) - Unset 'uid_attribute' on failure ------------------------------------------------------------------- Wed Dec 10 09:43:29 CET 2014 - hare@suse.de - libmultipath: Fall back to SG_IO if no UID could be assigned (bnc#908915) - Assign local priority for NAA VPD descriptor (bnc#907483) - libmultipath: finally fix dev_loss_tmo setting (bnc#889927) - libmultipath: Do not use 'sscanf' for parsing integers (bnc#889927) - devmapper: do not flush I/O for DM_DEVICE_CREATE (bnc#901809) - kpartx: handle more than 256 loop devices (bnc#898427) - multipathd: fixup locking in uev_remove_map() (bnc#901891) - multipathd: use global variable for uxsock timeout (bnc#900758) - multipathd: remove unused variable in cli_reconfigure() - Add %service calls for multipathd.socket ------------------------------------------------------------------- Mon Sep 22 11:02:53 CEST 2014 - hare@suse.de - Really fix segfault in recv_packet (bnc#896678) - Allow empty revision during discovery (bnc#896864) ------------------------------------------------------------------- Wed Sep 17 14:04:47 CEST 2014 - hare@suse.de - Fix segfault in recv_packet (bnc#896678) ------------------------------------------------------------------- Wed Sep 3 12:23:01 CEST 2014 - hare@suse.de - Fixup segfault due to double unlock - Skip USB devices during discovery (bnc#865577) - Ignore devices when sysfs_get_tgt_nodename fails (bnc#865577) - Use sysfs attribute vpd_pg80 to read serial number ------------------------------------------------------------------- Wed Sep 3 08:27:29 CEST 2014 - hare@suse.de - Create rcmultipathd links (bnc#894513) - multipathd: fix segfault in checkerloop() (bnc#894513) - Use regenerate_posttrans rpm macros (bnc#892181) ------------------------------------------------------------------- Tue Sep 2 16:51:23 UTC 2014 - trenn@suse.de - Do not call mkinitrd in rpm macros directly, make use of %{?regenerate_initrd_posttrans} and %{?regenerate_initrd_post} instead to avoid rebuilding of initrd for each package that needs initrd recreation. Only update initrd once per install/update if needed ------------------------------------------------------------------- Fri Aug 29 12:00:49 CEST 2014 - hare@suse.de - Fixup segfault during uev_path_add() (bnc#892214) ------------------------------------------------------------------- Thu Aug 21 12:16:53 CEST 2014 - hare@suse.de - Revert to ACT_RELOAD in domap() if the map exists - multipathd: asynchronous configuration (bnc#891189) - multipathd: timeout CLI commands when waiting for lock (bnc#891189) - Remove dm_udev_XXX wrapper functions - uxlsnr: use typedef for trigger function - multipathd: lock cli client list - multipathd: Use standard lists for CLI handling ------------------------------------------------------------------- Tue Aug 19 12:33:19 CEST 2014 - hare@suse.de - Use strlen() when checking for valid wwid - kpartx: zero out cookie (bnc#890902) - multipathd: Check for empty wwid when processing events (bnc#892214) ------------------------------------------------------------------- Mon Aug 18 16:24:05 CEST 2014 - hare@suse.de - Fixup device-mapper cookie handling yet again (bnc#890902) - Allow zero-sized devices during configuration - multipathd: issue warning on CLI command timeout (bnc#891189) ------------------------------------------------------------------- Wed Aug 13 20:04:34 CEST 2014 - hare@suse.de - Do not remove paths without uevent (bnc#890998) ------------------------------------------------------------------- Tue Aug 12 10:47:21 CEST 2014 - hare@suse.de - Fixup structure misalignment in config.h (bnc#890747) - Do not print empty multipaths section - Fixup 'uxsock_timeout' handling - Reload map if reinstate failed (bnc#890854) ------------------------------------------------------------------- Mon Aug 11 17:03:25 CEST 2014 - hare@suse.de - Close memory leak in print_multipath_topology - Implement 'uxsock_timeout' keyword (bnc#890551) - Return error when receiving CLI packet (bnc#890551) - multipath: do not print state 'orphan' for option '-l' (bnc#890551) - Fix race conditions during uevent processing (bnc#890994) ------------------------------------------------------------------- Tue Aug 5 12:34:04 CEST 2014 - hare@suse.de - Skip unhandled device types (bnc#881125) - use 'uid_attribute' per default when generating WWID (bnc#881125) - Use a default dev_loss_tmo of 600 (bnc#889927) - Fixup device-mapper 'cookie' handling (bnc#886743) - Remove last argument from verify_paths() - Add paths with a size of '0' as 'ghost' paths - Remove sysfs_get_dev() - Use glibc 'major' and 'minor' macros - Whitespace cleanup in mpath_persist ------------------------------------------------------------------- Mon Jul 28 10:18:43 CEST 2014 - hare@suse.de - Fixup wrong check for errno in uevent_listen() (bnc#889165) - Terminate uevent listener on ppoll() error (bnc#889165) ------------------------------------------------------------------- Fri Jul 25 10:53:27 CEST 2014 - hare@suse.de - Patches from upstream: * enable gcc format-security check * Accept "*" as a valid regular expression * check info.exists to get valid value * Don't forget to reload table when both reload and rename is required * libmultipath: Simplify read_line() * libmultipath: Zero-terminate sysfs_attr_get_value() result * libmultipath: Print line number for which parsing failed * libmultipath: Accept "*" as a valid regular expression * multipath: Wrong sysfs attribute used for iSCSI settings (bnc#883808) - Check for valid DM_DEVICE_INFO before proceeding (bnc#888453) - Scalability fixes (bnc#880356): * Separate out uevent parsing functions * Use poll() when receiving uevents * multipathd: push down lock in checkerloop() * Allow specific CLI commands to run unlocked * Push down vector lock during uevent processing ------------------------------------------------------------------- Wed Jul 23 12:35:44 CEST 2014 - hare@suse.de - recovery_tmo for iSCSI sessions not updated (bnc#883808) - Only filter for udev property if uid_attribute is present - Read wwid from sysfs vpg_pg83 attribute - Update multipath.conf.5 to clarify wwid generation - kpartx: Fixup persistent name generation (bnc#887582) - Revert 'return PATH_DOWN for quiesced paths' - Do not treat 'transport-offline' paths as 'offline' (bnc#888378) ------------------------------------------------------------------- Wed Jul 9 11:46:23 CEST 2014 - hare@suse.de - multipath: Check for running daemon when called with '-u' (bnc#886154) ------------------------------------------------------------------- Fri Jul 4 09:14:11 CEST 2014 - hare@suse.de - multipath: use option '-i' when called from udev (bnc#885628) - multipath: add option '-i' to ignore wwids file (bnc#885628) - Update hwtable for EMC XtremIO (bnc#880510) - Remove unused variable 'aas' from alua prioritzer - Patches from upstream: * Add multipath.conf force_sync option * make prioritizers use checker_timeout, if set * Improve multipath.conf syntax checking * orphan paths on failed add * Add missing interactive commands to multipathd man page * Make multipathd orphan paths that were removed externally * allow users to add wwids to /etc/multipath/wwids with -a * change conf->dry_run to conf->cmd * Return the correct size buffer in set_value() * Fix memory issues in path reordering failure code paths ------------------------------------------------------------------- Tue Jun 24 09:45:57 CEST 2014 - hare@suse.de - Fixup race condition with udev (bnc#883878) - Cleanup foreground operation handling in multipathd - Fix some minor issues in path reordering code (bnc#870465) - Patches from upstream: * Use existing user friendly names if possible * kpartx: fix extended partition size for >512b sectors * Mismatch between allocation length and transfer length in rdac prio * Mismatch between allocation length and transfer length in emc_clariion prio. ------------------------------------------------------------------- Fri Jun 13 10:51:48 CEST 2014 - hare@suse.de - 11-dm-mpath.rules: Import blkid values if all paths are down (bnc#875233) - kpartx.rules: Skip kpartx for multipath events (bnc#875233) ------------------------------------------------------------------- Tue May 20 12:36:57 CEST 2014 - hare@suse.de - Fix race condition with systemd (bnc#878809) ------------------------------------------------------------------- Fri May 16 10:26:03 CEST 2014 - hare@suse.de - Fix segfault when fast_io_fail_tmo is empty in config file - Crafted ordering of child paths for round robin path selector (bnc#870465) - multipath: enable sync support (bnc#872297) - Whitelist devices in multipath.rules (bnc#877281) ------------------------------------------------------------------- Fri Apr 11 12:23:29 CEST 2014 - hare@suse.de - Install multipath rule under 56-multipath.rules (bnc#873151) - Implement option '-u' for uevents (bnc#873151) - Remove trailing linefeed from sysfs attributes - Make checker_put() and prio_put() idempotent - Implement 'list path' CLI command - Disable reassign maps per default - Allow for NULL path when printing information - Fixup wwid blacklist printing - Use SCSI_IDENT_.* as the default property whitelist (bnc#872929) - Do not call 'blkid' in kpartx.rules - Allow empty wwids during discovery (bnc#872712) - Always set verbosity to '0' when checking devices (bnc#867840) - Fixup multipath rules for booting (bnc#870764) - Fixup dependencies in multipathd.service (bnc#872712) - Do not print empty device strings during discovery (bnc#872712) - Use multipath wwid if path wwid is empty (bnc#872712) - Set the correct PID when running in debug mode ------------------------------------------------------------------- Fri Mar 21 12:28:10 CET 2014 - hare@suse.de - Fixup ordering cycle with systemd (bnc#863218) - Rebase git repository to match with upstream - Revert 'display uevent sequence number'; not required anymore ------------------------------------------------------------------- Thu Mar 13 00:56:11 CET 2014 - ro@suse.de - downgrade device-mapper requirement to 1.2.78 until 1.2.82 is available anywhere ------------------------------------------------------------------- Wed Mar 12 16:36:56 CET 2014 - hare@suse.de - Update FSF address - Add 11-dm-mpath.rules (bnc#867968) - Link against libsystemd instead of libsystemd-daemon ------------------------------------------------------------------- Fri Feb 28 15:53:24 CET 2014 - hare@suse.de - Fixup spec file to correct rules permissions ------------------------------------------------------------------- Fri Feb 28 12:45:19 CET 2014 - hare@suse.de - Fixup 40-multipath.rules installation ------------------------------------------------------------------- Wed Feb 26 14:38:49 CET 2014 - hare@suse.de - Add 40-multipath.rules for dracut support ------------------------------------------------------------------- Fri Feb 14 14:55:28 CET 2014 - hare@suse.de - Install kpartx rules with correct prefix for dracut - filter for missing property in get_refwwid() (bnc#862250) - Double uevent stacksize yet again (bnc#855379) - do not fail discovery on individual devices (bnc#860850) - Prefer deprecated 'getuid' callout (bnc#861534) - Skip paths with empty wwid (bnc#861534) - correctly terminate string in strlcpy() (bnc#861534) - Don't chop const strings - Fixup typo in Makefile - display uevent sequence number on 'show daemon' ------------------------------------------------------------------- Tue Jan 21 16:32:33 CET 2014 - hare@suse.de - Fixup build issues ------------------------------------------------------------------- Tue Jan 21 13:58:15 CET 2014 - hare@suse.de - Update to official version 0.5.0 - remove: multipath-tools-0.4.9.tar.bz2 - remove: multipath-tools-0.4.9-opensuse-12.3.diff.bz2 - add: multipath-tools-0.5.0.tar.bz2 - add: multipath-tools-0.5.0-sles12.diff.bz2 - Merge: - multipath-tools-make-flexible-install-of-systemd-and-udev-files.patch ------------------------------------------------------------------- Tue Apr 16 10:08:18 UTC 2013 - idonmez@suse.com - Add Source URL, see https://en.opensuse.org/SourceUrls - use %setup -c to support the tarball ------------------------------------------------------------------- Fri Feb 15 13:55:24 UTC 2013 - cfarrell@suse.com - license update: GPL-2.0 Substantial number of GPL-2.0 files in the package ------------------------------------------------------------------- Fri Feb 15 12:15:09 UTC 2013 - rmilasan@suse.com - Make installation of systemd unit and udev files more flexible. add: multipath-tools-make-flexible-install-of-systemd-and-udev-files.patch ------------------------------------------------------------------- Fri Feb 1 10:29:11 CET 2013 - hare@suse.de - Update to latest mainline git version - Merge systemd fixes - Generate persistent device names for kpartx (bnc#799274) ------------------------------------------------------------------- Sun Aug 26 02:05:37 UTC 2012 - crrodriguez@opensuse.org - Systemd: use default service type instead of forking - Systemd: fix spec pre/post scripts. ------------------------------------------------------------------- Tue Jul 17 13:21:47 UTC 2012 - rmilasan@suse.com - Drop patch 0001-multipath.rules.patch, multipath not ready yet. ------------------------------------------------------------------- Tue Jul 17 12:43:43 UTC 2012 - rmilasan@suse.com - Fix the installation of multipath.rules file. ------------------------------------------------------------------- Mon Jun 11 12:58:05 UTC 2012 - rmilasan@suse.com - Drop RUN+="socket:..." and update the multipath.rule like Fedora does. ------------------------------------------------------------------- Wed May 30 17:32:10 CEST 2012 - hare@suse.de - Update to version 0.4.9 - Merge in latest changes from mainline ------------------------------------------------------------------- Fri Apr 20 08:35:06 UTC 2012 - rmilasan@suse.com - Run update of initrd at %post and %postun. We need this to make sure initrd reflects the updates. ------------------------------------------------------------------- Fri Sep 30 15:40:21 UTC 2011 - uli@suse.com - cross-build fix: use %__cc macro ------------------------------------------------------------------- Fri May 27 09:34:36 UTC 2011 - lnussel@suse.de - don't hard require boot.device-mapper in boot.multipath. dm-mod is autoloaded when accessing /dev/mapper/control anyways. ------------------------------------------------------------------- Mon Apr 4 16:40:14 UTC 2011 - crrodriguez@opensuse.org - fix build fail with AS_NEEDED by default ------------------------------------------------------------------- Fri Nov 26 10:18:45 CET 2010 - meissner@suse.de - updated one more dm_simplecmd caller with &cookie. - bumped 1 character buffer to 1 byte more for leading \0 ------------------------------------------------------------------- Tue Jul 6 16:17:27 CEST 2010 - hare@suse.de - Merge with fixes from mainline. ------------------------------------------------------------------- Wed Jun 30 16:19:00 UTC 2010 - jengelh@medozas.de - fix compilation on bi-arch by specifying LIB=%_lib (Makefiles would erroneously assume a 64-bit target just by the sheer presence of lib64, which is wrong) - always add in -D_GNU_SOURCE to get at struct ucred ------------------------------------------------------------------- Wed Jun 23 15:09:46 CEST 2010 - hare@suse.de - Increase initial timeout for 'tur' checker (bnc#616694) ------------------------------------------------------------------- Fri Jun 18 13:19:13 CEST 2010 - hare@suse.de - Set geometry information for multipath maps (bnc#613363) - Reset 'running' parameter for directio (bnc#600043) - Add fallback to init script for older versions (bnc#602957) ------------------------------------------------------------------- Fri Jun 4 12:18:02 CEST 2010 - hare@suse.de - Add HP 2000 to internal hardware table (bnc#603359) - Make path state messages unique - Add 'reassign_maps' configuration parameter - Profiling fixes: * Update 'max_fds' handling * Use strcmp() instead of strcmp_chomp() * Simplify sysfs_get_device() * Remove duplicate calls to path_offline() * Simplify dm_get_name() * Fixup devt2devname() * Rework dm_reassign() - check argument length in execute_program(bnc#610914) - Do not use LOG_CONS when opening syslog (bnc#610914) - Remove pid file usage from init scripts (bnc#600412) - Fixup boot.multipath init script (bnc#600412) ------------------------------------------------------------------- Wed May 12 08:08:47 CEST 2010 - hare@suse.de - Always provide symlinks for udev (bnc#603785) ------------------------------------------------------------------- Thu May 6 14:02:11 CEST 2010 - hare@suse.de - Use minor number in ev_remove_map() (bnc#599770) - signal_waiter() overwrites structure (bnc#591399) - Serialize startup on large machines (bnc#598697) - Update multipath(8) manpage for '-p' (bnc#602970) - Mark 'readsector0' checker as deprecated (bnc#589340) ------------------------------------------------------------------- Mon Apr 26 13:33:30 CEST 2010 - hare@suse.de - Errorneous message 'error starting uevent listener' - Graceful shutdown of logging thread (bnc#591399) ------------------------------------------------------------------- Mon Apr 26 12:02:32 CEST 2010 - hare@suse.de - Missing '-p' option for mkdir in mkinitrd script (bnc#597786) - rdac message not printed correctly (bnc#598302) - Use alias when printing log messages (bnc#598302) - valgrind fixes (bnc#591399) - Use VECTOR_SIZE() defines - Update hwtable factorization - Use log_close() on shutdown - Use refcounting for checkers (bnc#591399) - More valgrind fixes ------------------------------------------------------------------- Tue Apr 20 13:41:07 CEST 2010 - hare@suse.de - Provide correct persistent symlinks for user_friendly_names (bnc#596301) - Fixup hardware table for LSI arrays (bnc#597713) - Reassign maps during startup (bnc#586834) - Update manpage ------------------------------------------------------------------- Tue Apr 20 12:51:53 CEST 2010 - mmarek@suse.cz - Use mkdir -p in mkinitrd setup script (bnc#597786). ------------------------------------------------------------------- Fri Apr 9 15:30:55 CEST 2010 - hare@suse.de - Remove 'minor' argument from add_map_without_path - Check for correct device-mapper device in uevent handler - Start uevent service handler from main thread - Do not reassign multipath maps (bnc#594341) - Protect waiter structure by mutex (bnc#581200) - Log directly to syslog on shutdown (bnc#581200) - Clear up uevent queue on shutdown - Add more IBM/FAStT arrays (bnc#578738) ------------------------------------------------------------------- Mon Mar 29 16:35:15 CEST 2010 - hare@suse.de - Display average priority as group priority (bnc#588591) - Implement 'wait event' cli command (bnc#586834) - Reset existing maps (bnc#577894) ------------------------------------------------------------------- Mon Mar 15 13:54:56 CET 2010 - hare@suse.de - Setup 'checkint' when loading config file (bnc#586847) ------------------------------------------------------------------- Wed Mar 10 11:20:56 CET 2010 - hare@suse.de - Fix typo in persistent rules for by-label/by-uuid - Update debug string in verify_paths() - Evaluate feature setting in verify_paths() (bnc#584197) ------------------------------------------------------------------- Fri Mar 5 09:34:37 CET 2010 - hare@suse.de - Fixup 'async_timeout' initialization again (bnc#580413) ------------------------------------------------------------------- Fri Feb 26 12:37:10 UTC 2010 - coolo@novell.com - fix buffer overflow in strncat ------------------------------------------------------------------- Mon Feb 22 10:08:44 CET 2010 - hare@suse.de - 'reset log' cli command crashes daemon (bnc#577889) - Initialize 'async_timeout' variable correctly (bnc#580413) ------------------------------------------------------------------- Thu Feb 4 11:28:36 CET 2010 - hare@suse.de - Add hardware defaults for EMC Invista (bnc#573870) - Use '--replace-whitespace' for scsi_id (bnc#572209) - Asynchronous mode for tur checker (bnc#552688) - Update queue_if_no_path after sync with kernel state (bnc#570932) - Add 'max_polling_interval' config variable (bnc#570932) - Add 'async_timeout' configuration variable (bnc#570932) - Use default scsi_id callout for EMC Symmetrix (bnc#528481) - Update path_offline() to return device status - Update filename in init script - Fixes from upstream: * do not allow 0 size for multipath devices * Add nexenta comstart hardware defaults * Add checks for conf->xxx * Add %z wildcard to display path serial * don't pretend config file has setup parameters * documentation fixes ------------------------------------------------------------------- Mon Jan 25 14:44:43 CET 2010 - hare@suse.de - Fixup kpartx initrd script to handle loop devices (bnc#523749) - Switch off 'queue_if_no_path' before removing maps (bnc#475523) - Update logical partition handling (bnc#551827) ------------------------------------------------------------------- Fri Jan 22 16:19:17 CET 2010 - hare@suse.de - Fix mkinitrd scripts for 64bit (bnc572143) - Remove logical partitions maps with 'multipath -f' ------------------------------------------------------------------- Fri Jan 22 14:30:36 CET 2010 - ro@suse.de - testing for existence of /lib64 is not sufficient to find out if we are building for a lib64 platform ------------------------------------------------------------------- Mon Jan 11 15:10:18 CET 2010 - hare@suse.de - Update dev_loss_tmo for no_path_retry (bnc#492469) ------------------------------------------------------------------- Tue Nov 17 16:36:19 CET 2009 - hare@suse.de - Merge in changes from OpenSUSE 11.2 - Update 'no_path_retry' correctly for failed paths (bnc#534666) - Update no_path_retry setting when evaluating features (bnc#542145) - directio: block count calculation wrong (bnc#549028) - multipath segfaults if configuration file contains errors (bnc#540118) ------------------------------------------------------------------- Thu Oct 22 16:29:35 CEST 2009 - hare@suse.de - Make 'param' local (bnc#548708) - Include multipath-fix.patch in git tree. ------------------------------------------------------------------- Mon Sep 28 15:34:02 CEST 2009 - hare@suse.de - Fixup strip whitespaces from getuid output (bnc#542085) - Change prefix for DASD devices to 'ccw' - Update no_path_retry setting when evaluating features (bnc#542145) ------------------------------------------------------------------- Wed Sep 16 12:54:03 CEST 2009 - hare@suse.de - Update features when queue_if_no_path is set (bnc#511607) - Ignore error messages when multipathd is not started - Add debugging output for feature changes - Add generic LSI/Engenio controller (bnc#508030) - Update 'no_path_retry' correctly for failed paths (bnc#534666) - TUR checker should not return 'failed' for reservation conflict (bnc#498413) ------------------------------------------------------------------- Tue Sep 8 20:56:53 UTC 2009 - aj@suse.de - Fix last patch, one caller of dm_simplecmd was not updated (multipath-fix.patch). ------------------------------------------------------------------- Fri Aug 21 15:49:47 CEST 2009 - hare@suse.de - Update to latest upstream git version - Merge in SLES11 fixes - Build package from git tree - Implement '-u' option for kpartx (bnc#517442) ------------------------------------------------------------------- Mon Jul 13 12:24:34 CEST 2009 - hare@suse.de - Check for errors in pthread_create() - Lock vectors during shutdown - Cleanup various MALLOC/REALLOC callers - Fix multipathd crash on shutdown - Do not run kpartx on dm-uevent messages (bnc#473352) - Set pthread stacksize correctly (bnc#485287) - Add STK arrays to internal hardware table (bnc#503855) - Correct persistent symlink for cciss (bnc#497997) - Backport some fixes from upstream (bnc#445023) - Add 'reset log' cli command - no_path_retry <N> causes I/O to fail (bnc#485281) - Terminate uevent service queue - Wait for daemon to shutdown (bnc#481389) - Update cli request processing - Safe memory allocation in cli_handlers - Use 'LOG_CONS' option for openlog() - Remove sysfs attribute cache - Add 'shutdown' cli command - Display FC error messages correctly - Wait for devices in init script (bnc#487586) - Always synchronize with dm state (bnc#447887) - Add 'aas' path prioritizer (bnc#472069) - Synchronize daemon startup with init file (bnc#481389) - Merge feature string in assemble_map (bnc#507793) ------------------------------------------------------------------- Fri Jun 19 10:35:46 CEST 2009 - coolo@novell.com - disable as-needed for this package as it fails to build with it ------------------------------------------------------------------- Fri Mar 20 10:43:12 CET 2009 - hare@suse.de - Reset checker message for blocked checkers - Increase priority for EMC Clariion arrays (bnc#484529) - Start waiter threads for single paths correctly (bnc#473841) - Use pthread_sigmask in alias.c when called from daemon. ------------------------------------------------------------------- Thu Mar 19 12:09:03 CET 2009 - hare@suse.de - Add %pre and %post scripts to stop multipathd during update - Don't set FC parameter on non-SCSI devices - multipath -t crashes with invalid configuration file ------------------------------------------------------------------- Fri Mar 13 14:21:05 CET 2009 - hare@suse.de - Don't remove partition mappings on stop (bnc#468826) - Set stacksize for log thread - Terminate all I/O before flushing maps (bnc#475523) - Select 'features' keyword from multipath setting (bnc#465009) ------------------------------------------------------------------- Tue Mar 10 12:46:36 CET 2009 - hare@suse.de - Use lists for uevent processing (bnc#478874) - Set stacksize of uevent handling thread (bnc#478874) - Increase uevent buffer size - Strip trailing blanks from wwid - Stack overflow in uev_trigger (bnc#476540) ------------------------------------------------------------------- Thu Feb 26 12:36:40 CET 2009 - hare@suse.de - Fixup multibus zero path handling (bnc#476330) - Update checker handling for blocked devices - Only pass block events to multipathd - Clean up uevent processing (bnc#478874) - Set stacksize correctly for event processing thread (bnc#478874) ------------------------------------------------------------------- Mon Feb 23 16:36:32 CET 2009 - hare@suse.de - Remove stray umask() call (bnc#458598) - Don't call kpartx if no paths are active (bnc#473352) ------------------------------------------------------------------- Thu Feb 19 16:26:32 CET 2009 - hare@suse.de - Multipathd dies immediately after startup (bnc#473029) - Return ghost state if port is in standby (bnc#475816) - Switch off queue_if_no_path before removing paths (bnc#475523) ------------------------------------------------------------------- Mon Feb 9 14:53:01 CET 2009 - hare@suse.de - Fix leastpending loadbalancer output (bnc#444199) - Start waitevent checker on new paths (bnc#473841) - Use 'noflush' for kpartx (bnc#473352) ------------------------------------------------------------------- Fri Feb 6 15:00:45 CET 2009 - hare@suse.de - Display multipath output for leastpending loadbalancer properly (bnc#444199) ------------------------------------------------------------------- Wed Feb 4 11:38:31 CET 2009 - hare@suse.de - Set queue_if_no_path setting during map reload (bnc#472253) - Remove obsolete 'umount map' uevent handling - Retry TUR on driver errors (bnc#456961) ------------------------------------------------------------------- Tue Feb 3 11:22:41 CET 2009 - hare@suse.de - Copy persistent bindings file into initramfs (bnc#468804) - Invert DM_STATE check for kpartx rules (bnc#440959) ------------------------------------------------------------------- Mon Feb 2 11:27:51 CET 2009 - hare@suse.de - Correct dbg_malloc() definition - Fix more memory leaks - Double free on path release (bnc#458393) ------------------------------------------------------------------- Mon Jan 26 14:17:57 CET 2009 - hare@suse.de - Don't access blocked devices in checkerloop() - Check for validity in VECTOR_XXX defines (bnc#469269,bnc#457465) ------------------------------------------------------------------- Fri Jan 23 14:15:18 CET 2009 - hare@suse.de - Update dev_loss_tmo handling (bnc#458393) - Fix directio error messages - Update sdev_state handling ------------------------------------------------------------------- Mon Jan 19 09:18:28 CET 2009 - hare@suse.de - Add new HP machines to hardware table (bnc#442133) - Print device-mapper tables for debugging - Properly quote variables in mkinitrd scripts (bnc#447966) - shuffle call to memarea_init - Add xdr_setsite in init scripts (bnc#459529) ------------------------------------------------------------------- Tue Jan 13 16:14:39 CET 2009 - hare@suse.de - Do not run checkers or prioritizers on blocked devices (bnc#464155) - Implement dev_loss_tmo and fast_io_fail_tmo (bnc#464155) - Use default values for dev_loss_tmo and fast_io_fail_tmo - Display checker and prio name on failure - Add more debugging output ------------------------------------------------------------------- Mon Jan 12 17:28:47 CET 2009 - hare@suse.de - Set max_fds setting for multipath (bnc#457443) - Enhance error messages for checker and prio loading (bnc#456214) - Fix merge errors for prio_weightedpath (bnc#441007) - Fix sysfs_attr_get_value (bnc#456747) - Do not reinitialize prio and checker lists after config file has been parsed (bnc#464373) - Minor cleanups ------------------------------------------------------------------- Thu Dec 4 15:05:08 CET 2008 - hare@suse.de - Split off IBM ESS hwtable entries (bnc#439763) - Reload map when device R/O setting changes (bnc#440959) ------------------------------------------------------------------- Fri Nov 21 14:07:56 CET 2008 - hare@suse.de - Add 'Weighted Paths' prioritizer (bnc#441007) - Fix crashes in update_multipath ------------------------------------------------------------------- Thu Nov 20 16:10:48 CET 2008 - hare@suse.de - Valgrind fixes * Add missing initialisation * Always allocate memory for alias * Check return value of basename - Adapt to new sysfs layout (bnc#435215, bnc#445041) - Use /sys/dev to speedup reverse lookups - Rework sysfs device handling (bnc#435215, bnc#438031) - Search for correct hardware entry during reconfigure (bnc#435688) - Use local variables for device mapper params - Allow zero paths for multipath maps ------------------------------------------------------------------- Mon Nov 17 12:42:34 CET 2008 - hare@suse.de - Update HP hardware table (bnc#442133) - Zero out lines in print.c (bnc#445023) ------------------------------------------------------------------- Mon Nov 10 08:51:26 CET 2008 - hare@suse.de - Check for empty mpvecs in mpvec_garbage_collector() (bnc#437245) - dmraid uuid starts with 'DMRAID' (bnc#439439) - Handle arguments to multipathd from the init file ------------------------------------------------------------------- Thu Nov 6 17:36:51 CET 2008 - ro@suse.de - commenting multiline rpm macros is dangerous (read broken) remove percent sign in commented macro lines ------------------------------------------------------------------- Mon Nov 3 15:37:08 CET 2008 - hare@suse.de - Use pthread_join() during shutdown to avoid crash (bnc#437245) - Fixup '%n' to handle '!' kernel device name syntax (bnc#435172) - Use correct commandline for cciss scsi_id callouts (bnc#435172) - Do not check for valid mp context in get_state() (bnc#433659) - Link directio checker against libaio (bnc#433659) - Use regmatch when checking for duplicates in hwtable (bnc#439763) ------------------------------------------------------------------- Mon Oct 27 10:30:18 CET 2008 - hare@suse.de - Patches from mainline: * Increase bindings file lock timeout * Fixes for 'show paths format' * Add 'show wildcards' cli cmd * Add support for IBM storage devices - fopen() returns NULL on failure (bnc#432598) - Read verbosity level from configuration file (bnc#388284) - kpartx -l does not remove it's loop device (bnc#417266) - Missing fixes for libprio ontap.c (bnc#426975) - Increase buffer size in find_loop_by_file (bnc#436428) - Include SCSI device handler modules for initrd (bnc#431877) ------------------------------------------------------------------- Fri Sep 26 16:26:55 CEST 2008 - hare@suse.de - Implement map resize (FATE#302007) - Handle cciss devices correctly (bnc#419123) ------------------------------------------------------------------- Wed Sep 24 22:59:11 CEST 2008 - ro@suse.de - use udevadm info instead of udevinfo ------------------------------------------------------------------- Wed Sep 3 11:09:34 CEST 2008 - hare@suse.de - Merge in fixes from upstream: * Add IBM IPR to hardware table (bnc#419086) * Add IBM DS4300 to hardware table * Fix settings for scsi_id changes - Call mkinitrd_setup during %post and %postun (bnc#413709) ------------------------------------------------------------------- Thu Aug 28 17:08:16 CEST 2008 - ro@suse.de - fix init scripts ------------------------------------------------------------------- Wed Jul 23 14:45:18 CEST 2008 - hare@suse.de - Update to version 0.4.8 - Include changes from SLES10 - Include mkinitrd scriptlets ------------------------------------------------------------------- Wed May 28 09:50:28 CEST 2008 - hare@suse.de - Calculate correct partition offset in kpartx (bnc#394658) ------------------------------------------------------------------- Fri May 9 13:25:30 CEST 2008 - hare@suse.de - Fixup kpartx rules (bnc#387667) ------------------------------------------------------------------- Tue Apr 29 17:05:19 CEST 2008 - hare@suse.de - Merge in fixes from upstream - Merge fixes from SLES10 SP2 ------------------------------------------------------------------- Wed Sep 19 15:30:41 CEST 2007 - hare@suse.de - Fixup generated dm_linear udev rules (#218122) ------------------------------------------------------------------- Thu Aug 30 09:24:27 CEST 2007 - hare@suse.de - Rework dm_linear; udev rules should only be created if the feature was activated (#302422) ------------------------------------------------------------------- Fri Aug 10 16:48:31 CEST 2007 - hare@suse.de - Implement dm_linear (#218122) ------------------------------------------------------------------- Thu Aug 2 11:10:35 CEST 2007 - hare@suse.de - Merge in latest fixes from upstream - Remove local patches; merge with upstream - Fix kpartx handling of extended partitions - Use underscores for partition names (#293792) ------------------------------------------------------------------- Mon May 21 15:34:07 CEST 2007 - hare@suse.de - Rework udev handling - Split off kpartx package ------------------------------------------------------------------- Mon May 14 16:20:55 CEST 2007 - hare@suse.de - Merge in latest fixes from upstream - Add all SuSE specific files to git repository. ------------------------------------------------------------------- Fri May 11 16:06:16 CEST 2007 - hare@suse.de - Include latest changes from upstream - Remove libsysfs (242766) - Handle extended partitions for kpartx ------------------------------------------------------------------- Mon Dec 4 16:51:13 CET 2006 - dmueller@suse.de - don't build as root ------------------------------------------------------------------- Fri Nov 17 11:55:00 CET 2006 - hare@suse.de - integrate upstream fixes - update udev rule for YaST2 dmraid support (217807]) ------------------------------------------------------------------- Mon Nov 6 13:11:17 CET 2006 - hare@suse.de - Really fixup udev rule (216167). ------------------------------------------------------------------- Fri Oct 20 02:07:47 CEST 2006 - ro@suse.de - make it build ------------------------------------------------------------------- Mon Sep 25 10:03:49 CEST 2006 - hare@suse.de - update to latest fixes from git tree - remove fixes integrated in upstream - fixup udev rule (#203688) ------------------------------------------------------------------- Thu Sep 14 00:18:10 CEST 2006 - ro@suse.de - use device-mapper-devel in BuildRequires ------------------------------------------------------------------- Thu Aug 31 10:56:01 CEST 2006 - hare@suse.de - include latest fixes from git tree - update kpartx_id and udev rules to work with dmraid. - Fix return value for multipath -l ------------------------------------------------------------------- Thu Aug 17 02:07:59 CEST 2006 - ro@suse.de - workaround problem in git-patch normal patch can't do a "rename", so copy file first ------------------------------------------------------------------- Tue Jul 11 15:04:59 CEST 2006 - hare@suse.de - Update to official version 0.4.7 - Refactor git update to apply to 0.4.7 ------------------------------------------------------------------- Wed Jun 28 13:51:36 CEST 2006 - hare@suse.de - Remove blacklisting of dasd device node, use product_blacklist instead (#188688) ------------------------------------------------------------------- Mon Jun 12 15:14:41 CEST 2006 - hare@suse.de - Add 72-multipath-compat.rules to create 'by-name' symlink again for compability (#183663) ------------------------------------------------------------------- Fri Jun 2 12:47:05 CEST 2006 - hare@suse.de - Merge in fixed from upstream - Set device-mapper name correctly (#181127) ------------------------------------------------------------------- Thu Jun 1 17:29:23 CEST 2006 - hare@suse.de - Merge in fixes from upstream - Fixup aliasing handling - Fix string length in pp_alua - Use correct regexp patterns for hwtable (#177842) - Fixup 71-multipath.rules to work correctly with the updated device-mapper online/offline events (#176516 - LTC23961) - Add kpartx_id for the updated 71-multipath.rules ------------------------------------------------------------------- Mon May 22 17:16:00 CEST 2006 - schwab@suse.de - Don't strip binaries. ------------------------------------------------------------------- Tue May 2 12:48:56 CEST 2006 - hare@suse.de - Merge in fixes from upstream - Merged local patches - Added hds_modular prioritizer - Remove merged patches - Allow for setting of maximum number of open files (#149979) - Implement 'stop' for init scripts ------------------------------------------------------------------- Mon Apr 10 09:48:16 CEST 2006 - hare@suse.de - Lowering priority for pp_tpc - Split off DS6000 to fixup priority handler (#161347) ------------------------------------------------------------------- Wed Apr 5 12:14:53 CEST 2006 - hare@suse.de - Disable debug messages in pp_tpc. ------------------------------------------------------------------- Wed Mar 29 09:27:50 CEST 2006 - hare@suse.de - Explicitely create partitions at boot time (#159927) ------------------------------------------------------------------- Thu Mar 23 11:36:25 CET 2006 - hare@suse.de - Add hwtable entry for IBM 3526. ------------------------------------------------------------------- Tue Mar 14 16:40:41 CET 2006 - hare@suse.de - Fix another typo in mpath_id. ------------------------------------------------------------------- Tue Mar 14 16:20:33 CET 2006 - hare@suse.de - Fix typo in mpath_id. ------------------------------------------------------------------- Mon Mar 13 13:29:08 CET 2006 - hare@suse.de - Fix autobuild warnings. - Include some minor fixed from upstream. ------------------------------------------------------------------- Thu Mar 9 11:28:11 CET 2006 - hare@suse.de - Add mpath_id program to call kpartx only on multipathed devices (#149995 - LTC21557). - Include latest fixes from upstream. ------------------------------------------------------------------- Wed Feb 8 16:13:15 CET 2006 - hare@suse.de - Add device blacklisting (#85778) - Further manpage installation fixes (#146179, #147053, #147911) ------------------------------------------------------------------- Wed Jan 25 21:38:27 CET 2006 - mls@suse.de - converted neededforbuild to BuildRequires ------------------------------------------------------------------- Thu Jan 19 13:59:32 CET 2006 - hare@suse.de - Fix manpage installation. ------------------------------------------------------------------- Tue Jan 17 09:01:03 CET 2006 - hare@suse.de - Include latest git fixes - Remove old patches which are now upstream - Add new hwtable entry for shark (#142176) ------------------------------------------------------------------- Fri Dec 16 15:20:47 CET 2005 - hare@suse.de - Fix dependencies for /etc/init.d/boot.multipath - Fix kpartx rules to generate proper partition names. ------------------------------------------------------------------- Wed Dec 7 16:49:02 CET 2005 - hare@suse.de - Update to multipath-tools-0.4.6 - Include latest git fixes - Port patches from SLES9 SP3 ------------------------------------------------------------------- Mon Oct 31 12:30:14 CET 2005 - dmueller@suse.de - don't build as root ------------------------------------------------------------------- Mon Sep 5 17:40:04 CEST 2005 - matz@suse.de - Fix broken usage of self-defined syscall [#114933]. ------------------------------------------------------------------- Fri Aug 26 16:00:36 CEST 2005 - hare@suse.de - Fix kpartx DASD partition support ------------------------------------------------------------------- Thu Aug 4 16:45:27 CEST 2005 - hare@suse.de - Add 'directio' path checker - Add support for S/390 DASD (PAV enablement). - Update to package from SLES9 ------------------------------------------------------------------- Thu Jun 23 10:05:56 CEST 2005 - lmb@suse.de - LUs with a WWN containing "fd" were blacklisted (#93562). ------------------------------------------------------------------- Thu Jun 16 16:33:42 CEST 2005 - lmb@suse.de - Remove stray newline character from /dev/disk/by-name/ entries (#85798, #86763) - Clear /dev/disk/by-name/ on boot. (#85978) - scsi_id now handles EMC Symmetrix; remove work-around for #86760. ------------------------------------------------------------------- Wed Jun 15 13:31:47 CEST 2005 - meissner@suse.de - use RPM_OPT_FLAGS. ------------------------------------------------------------------- Mon Jun 13 23:51:59 CEST 2005 - ro@suse.de - neededforbuild: udev -> sysfsutils ------------------------------------------------------------------- Tue Jun 7 15:38:36 CEST 2005 - lmb@suse.de - Import fixes from upstream. - Hardware table updates for IBM ESS and EMC CX (#81688). - Reinstate paths correctly after failure/restore cycle (#85781, #86444). - Create map names again and fix segfault in devmap_name (#85798). ------------------------------------------------------------------- Tue May 24 15:16:16 CEST 2005 - hare@suse.de - Fix segmentation fault with EMC Symmetrix (#85614). - Update EMC Symmetrix entry in hwtable. ------------------------------------------------------------------- Mon May 23 12:21:31 CEST 2005 - hare@suse.de - Add hwtable entry for IBM DS6000. (#63903) - Do a rescan for devices if multipath command line option is set. ------------------------------------------------------------------- Fri May 20 15:29:45 CEST 2005 - hare@suse.de - Fix devmap_name to use mapname and return proper status (#84748). ------------------------------------------------------------------- Thu May 12 12:10:39 CEST 2005 - lmb@suse.de - Don't complain about default prio callout command (#81695). - Reflect recent changes in boot.multipath as well as multipathd init scripts. - Actually fail paths when they are detected to be failed by multipathd (#81679). - killproc/startproc/checkproc can't be used with multipathd because of the way the daemon switches to its own namespace (#80443). ------------------------------------------------------------------- Mon May 9 11:18:35 CEST 2005 - hare@suse.de - Use proper path checker for SGI TPC arrays. - Update hwtable entries for SGI TP9400 and SGI TP9500. - Write correct PID file (#80443). ------------------------------------------------------------------- Mon Apr 25 11:41:33 CEST 2005 - lmb@suse.de - Update to 0.4.4: pp_alua now licensed as GPL (#78628). - multipath-tools-oom-adj.patch: oom_adj to a valid value. ------------------------------------------------------------------- Thu Apr 21 10:50:05 CEST 2005 - lmb@suse.de - Update to 0.4.4-pre18 which fixes the multipathd to initialize correctly in the absence of a configuration file (79239). ------------------------------------------------------------------- Wed Apr 20 16:05:56 CEST 2005 - lmb@suse.de - Put multipath cache back into /dev because /var might not be mounted. - Correct hwtable entry SGI TP9400, TP9500 and IBM 3542. ------------------------------------------------------------------- Wed Apr 20 13:32:51 CEST 2005 - lmb@suse.de - Update to 0.4.4-pre16 - Build against device-mapper.1.01.xx correctly. ------------------------------------------------------------------- Tue Apr 19 12:02:49 CEST 2005 - lmb@suse.de - Build w/o device-mapper update again. ------------------------------------------------------------------- Mon Apr 18 14:21:59 CEST 2005 - lmb@suse.de - Update to 0.4.4-pre14 - Build versus device-mapper-1.01.01 to prevent deadlocks in kernel-space. - Fix devmap_name to work with udev. - Fix startup of multipathd w/o configuration file present. ------------------------------------------------------------------- Fri Apr 15 14:46:19 CEST 2005 - lmb@suse.de - Add path priority checker for EMC CLARiiON and make necessary adjustments so that it gets called by default (#62491). - Set the default udev dir to '/dev' ------------------------------------------------------------------- Fri Apr 15 13:18:42 CEST 2005 - hare@suse.de - Fix to allocate default strings (#78056) - Fix default entry for TPC9500. ------------------------------------------------------------------- Wed Apr 13 08:30:21 CEST 2005 - hare@suse.de - Added pp_alua path priority checker. - Update to multipath-tools-0.4.4-pre12. ------------------------------------------------------------------- Mon Apr 11 13:32:05 CEST 2005 - hare@suse.de - Update to multipath-tools-0.4.4-pre10. ------------------------------------------------------------------- Fri Apr 8 09:38:16 CEST 2005 - hare@suse.de - Update multipath to handle only true multipath devices (#62491). - Update kpartx to use the device mapper target name if available. - Add boot.multipath script for early set up of multipath targets. ------------------------------------------------------------------- Thu Mar 31 09:32:12 CEST 2005 - hare@suse.de - Update devmap_name to select targets by table type (#62493). ------------------------------------------------------------------- Tue Jan 25 11:16:26 CET 2005 - lmb@suse.de - Update to 0.4.2 and fix some bugs + add support for the extended DM multipath kernel module. (#47491) ------------------------------------------------------------------- Thu Nov 11 18:15:15 CET 2004 - hare@suse.de - Fix bugs to make it work on S/390 (#47491). ------------------------------------------------------------------- Fri Nov 5 13:58:00 CET 2004 - hare@suse.de - Update to version 0.3.6 (#47491). - Fix multipath init script - Install configuration file example. - Install multipathd in /sbin instead of /usr/bin. ------------------------------------------------------------------- Tue Jul 20 09:22:11 CEST 2004 - fehr@suse.de - updated README mp-tools-issues.pdf (see #40640) ------------------------------------------------------------------- Wed Jun 9 12:18:01 CEST 2004 - fehr@suse.de - added pdf with README to package (see #40640) ------------------------------------------------------------------- Thu Jun 3 18:11:41 CEST 2004 - fehr@suse.de - updated to version 0.2.1 - removed patches zero-currpath.patch and rm-newline-in-name.patch already contained in 0.2.1 ------------------------------------------------------------------- Thu Jun 3 09:38:49 CEST 2004 - fehr@suse.de - added patch zero-currpath.patch (see bugzilla #40640) ------------------------------------------------------------------- Wed May 26 20:14:05 CEST 2004 - uli@suse.de - fixed to build on s390x ------------------------------------------------------------------- Wed May 26 10:57:37 CEST 2004 - fehr@suse.de - added patch rm-newline-in-name.patch (see bugzilla #40640) ------------------------------------------------------------------- Tue May 25 10:43:15 CEST 2004 - fehr@suse.de - created initial version of a SuSE package from version 0.2.0 of multipath tools -------------------------------------------------------------------
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
