File ocserv.config.patch of Package ocserv

Overview Repositories Revisions Requests Users Attributes Meta

File ocserv.config.patch of Package ocserv

diff --git a/doc/sample.config b/doc/sample.config
index 0e33484f..60ab3e93 100644
--- a/doc/sample.config
+++ b/doc/sample.config
@@ -48,7 +48,7 @@
 #auth = "pam"
 #auth = "pam[gid-min=1000]"
 #auth = "plain[passwd=./sample.passwd,otp=./sample.otp]"
-auth = "plain[passwd=./sample.passwd]"
+auth = "plain[passwd=/etc/ocserv/ocpasswd]"
 #auth = "certificate"
 #auth = "radius[config=/etc/radiusclient/radiusclient.conf,groupconfig=true]"
 
@@ -90,8 +90,8 @@ auth = "plain[passwd=./sample.passwd]"
 # listen-netns = "foo"
 
 # TCP and UDP port number
-tcp-port = 443
-udp-port = 443
+tcp-port = 9000
+udp-port = 9001
 
 # The user the worker processes will be run as. This should be a dedicated
 # unprivileged user (e.g., 'ocserv') and no other services should run as this
@@ -126,8 +126,8 @@ socket-file = /var/run/ocserv-socket
 
 #server-cert = /etc/ocserv/server-cert.pem
 #server-key = /etc/ocserv/server-key.pem
-server-cert = ../tests/certs/server-cert.pem
-server-key = ../tests/certs/server-key.pem
+server-cert = /etc/ocserv/certificates/server-cert.pem
+server-key = /etc/ocserv/certificates/server-key.pem
 
 # Diffie-Hellman parameters. Only needed if for old (pre 3.6.0
 # versions of GnuTLS for supporting DHE ciphersuites.
@@ -154,7 +154,7 @@ server-key = ../tests/certs/server-key.pem
 # client certificates (public keys) if certificate authentication
 # is set.
 #ca-cert = /etc/ocserv/ca.pem
-ca-cert = ../tests/certs/ca.pem
+ca-cert = /etc/ocserv/certificates/ca-cert.pem
 
 # The number of sub-processes to use for the security module (authentication)
 # processes. Typically this should not be set as the number of processes
@@ -180,7 +180,7 @@ ca-cert = ../tests/certs/ca.pem
 # the isolation was tested at. If you get random failures on worker processes, try
 # disabling that option and report the failures you, along with system and debugging
 # information at: https://gitlab.com/ocserv/ocserv/issues
-isolate-workers = true
+isolate-workers = false
 
 # A banner to be displayed on clients after connection
 #banner = "Welcome"
@@ -249,7 +249,7 @@ mobile-dpd = 1800
 switch-to-tcp-timeout = 25
 
 # MTU discovery (DPD must be enabled)
-try-mtu-discovery = false
+try-mtu-discovery = true
 
 # To enable load-balancer connection draining, set server-drain-ms to a value
 # higher than your load-balancer health probe interval.
@@ -415,8 +415,8 @@ rekey-method = ssl
 # STATS_BYTES_OUT, STATS_DURATION that contain a 64-bit counter of the bytes 
 # output from the tun device, and the duration of the session in seconds.
 
-#connect-script = /usr/bin/myscript
-#disconnect-script = /usr/bin/myscript
+#connect-script = /usr/bin/ocserv-script
+#disconnect-script = /usr/bin/ocserv-script
 
 # This script is to be called when the client's advertised hostname becomes
 # available. It will contain REASON with "host-update" value and the
@@ -506,7 +506,8 @@ ipv4-netmask = 255.255.255.0
 # The advertised DNS server. Use multiple lines for
 # multiple servers.
 # dns = fc00::4be0
-dns = 192.168.1.2
+dns = 8.8.8.8
+dns = 8.8.4.4
 
 # The NBNS server (if any)
 #nbns = 192.168.1.3
@@ -545,8 +546,8 @@ ping-leases = false
 # comment out all routes from the server, or use the special keyword
 # 'default'.
 
-route = 10.10.10.0/255.255.255.0
-route = 192.168.0.0/255.255.0.0
+#route = 10.10.10.0/255.255.255.0
+#route = 192.168.0.0/255.255.0.0
 #route = fef4:db8:1000:1001::/64
 #route = default
 
@@ -719,18 +720,18 @@ client-bypass-protocol = false
 # An example virtual host with different authentication methods serviced
 # by this server.
 
-[vhost:www.example.com]
-auth = "certificate"
+#[vhost:www.example.com]
+#auth = "certificate"
 
-ca-cert = ../tests/certs/ca.pem
+#ca-cert = ../tests/certs/ca.pem
 
 # The certificate set here must include a 'dns_name' corresponding to
 # the virtual host name.
 
-server-cert = ../tests/certs/server-cert-secp521r1.pem
-server-key = ../tests/certs/server-key-secp521r1.pem
+#server-cert = ../tests/certs/server-cert-secp521r1.pem
+#server-key = ../tests/certs/server-key-secp521r1.pem
 
-ipv4-network = 192.168.2.0
-ipv4-netmask = 255.255.255.0
+#ipv4-network = 192.168.2.0
+#ipv4-netmask = 255.255.255.0
 
-cert-user-oid = 0.9.2342.19200300.100.1.1
+#cert-user-oid = 0.9.2342.19200300.100.1.1
diff --git a/doc/systemd/socket-activated/ocserv.socket b/doc/systemd/socket-activated/ocserv.socket
index 9444f190..a0ac362a 100644
--- a/doc/systemd/socket-activated/ocserv.socket
+++ b/doc/systemd/socket-activated/ocserv.socket
@@ -2,8 +2,8 @@
 Description=OpenConnect SSL VPN server Socket
 
 [Socket]
-ListenStream=443
-ListenDatagram=443
+ListenStream=9000
+ListenDatagram=9001
 BindIPv6Only=default
 Accept=false
 ReusePort=true

Places

File ocserv.config.patch of Package ocserv

Places