openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File podman.changes of Package podman (Revision 95a1298bd06b710da68337671fdd98c5)

Currently displaying revision 95a1298bd06b710da68337671fdd98c5 , Show latest

-------------------------------------------------------------------
Fri Oct  4 06:57:16 UTC 2019 - Sascha Grunert <sgrunert@suse.com>

- Update podman to v1.6.1
  * Features
    - The podman network create, podman network rm, podman network
      inspect, and podman network ls commands have been added to
      manage CNI networks used by Podman
    - The podman volume create command can now create and mount
      volumes with options, allowing volumes backed by NFS, tmpfs,
      and many other filesystems
    - Podman can now run containers without CGroups for better
      integration with systemd by using the --cgroups=disabled flag
      with podman create and podman run. This is presently only
      supported with the crun OCI runtime
    - The podman volume rm and podman volume inspect commands can now
      refer to volumes by an unambiguous partial name, in addition to
      full name (e.g. podman volume rm myvol to remove a volume named
      myvolume) (#3891)
    - The podman run and podman create commands now support the
      --pull flag to allow forced re-pulling of images (#3734)
    - Mounting volumes into a container using --volume, --mount, and
      --tmpfs now allows the suid, dev, and exec mount options (the
      inverse of nosuid, nodev, noexec) (#3819)
    - Mounting volumes into a container using --mount now allows the
      relabel=Z and relabel=z options to relabel mounts.
    - The podman push command now supports the --digestfile option to
      save a file containing the pushed digest
    - Pods can now have their hostname set via podman pod create
      --hostname or providing Pod YAML with a hostname set to podman
      play kube (#3732)
    - The podman image sign command now supports the --cert-dir flag
    - The podman run and podman create commands now support the
      --security-opt label=filetype:$LABEL flag to set the SELinux
      label for container files
    - The remote Podman client now supports healthchecks
  * Bugfixes
    - Fixed a bug where remote podman pull would panic if a Varlink
      connection was not available (#4013)
    - Fixed a bug where podman exec would not properly set terminal
      size when creating a new exec session (#3903)
    - Fixed a bug where podman exec would not clean up socket
      symlinks on the host (#3962)
    - Fixed a bug where Podman could not run systemd in containers
      that created a CGroup namespace
    - Fixed a bug where podman prune -a would attempt to prune images
      used by Buildah and CRI-O, causing errors (#3983)
    - Fixed a bug where improper permissions on the ~/.config
      directory could cause rootless Podman to use an incorrect
      directory for storing some files
    - Fixed a bug where the bash completions for podman import threw
      errors
    - Fixed a bug where Podman volumes created with podman volume
      create would not copy the contents of their mountpoint the
      first time they were mounted into a container (#3945)
    - Fixed a bug where rootless Podman could not run podman exec
      when the container was not run inside a CGroup owned by the
      user (#3937)
    - Fixed a bug where podman play kube would panic when given Pod
      YAML without a securityContext (#3956)
    - Fixed a bug where Podman would place files incorrectly when
      storage.conf configuration items were set to the empty string
      (#3952)
    - Fixed a bug where podman build did not correctly inherit
      Podman's CGroup configuration, causing crashed on CGroups V2
      systems (#3938)
    - Fixed a bug where podman cp would improperly copy files on the
      host when copying a symlink in the container that included a
      glob operator (#3829)
    - Fixed a bug where remote podman run --rm would exit before the
      container was completely removed, allowing race conditions when
      removing container resources (#3870)
    - Fixed a bug where rootless Podman would not properly handle
      changes to /etc/subuid and /etc/subgid after a container was
      launched
    - Fixed a bug where rootless Podman could not include some
      devices in a container using the --device flag (#3905)
    - Fixed a bug where the commit Varlink API would segfault if
      provided incorrect arguments (#3897)
    - Fixed a bug where temporary files were not properly cleaned up
      after a build using remote Podman (#3869)
    - Fixed a bug where podman remote cp crashed instead of reporting
      it was not yet supported (#3861)
    - Fixed a bug where podman exec would run as the wrong user when
      execing into a container was started from an image with
      Dockerfile USER (or a user specified via podman run --user)
      (#3838)
    - Fixed a bug where images pulled using the oci: transport would
      be improperly named
    - Fixed a bug where podman varlink would hang when managed by
      systemd due to SD_NOTIFY support conflicting with Varlink
      (#3572)
    - Fixed a bug where mounts to the same destination would
      sometimes not trigger a conflict, causing a race as to which
      was actually mounted
    - Fixed a bug where podman exec --preserve-fds caused Podman to
      hang (#4020)
    - Fixed a bug where removing an unmounted container that was
      unmounted might sometimes not properly clean up the container
      (#4033)
    - Fixed a bug where the Varlink server would freeze when run in a
      systemd unit file (#4005)
    - Fixed a bug where Podman would not properly set the $HOME
      environment variable when the OCI runtime did not set it
    - Fixed a bug where rootless Podman would incorrectly print
      warning messages when an OCI runtime was not found (#4012)
    - Fixed a bug where named volumes would conflict with, instead of
      overriding, tmpfs filesystems added by the --read-only-tmpfs
      flag to podman create and podman run
    - Fixed a bug where podman cp would incorrectly make the target
      directory when copying to a symlink which pointed to a
      nonexistent directory (#3894)
    - Fixed a bug where remote Podman would incorrectly read STDIN
      when the -i flag was not set (#4095)
    - Fixed a bug where podman play kube would create an empty pod
      when given an unsupported YAML type (#4093)
    - Fixed a bug where podman import --change improperly parsed CMD
      (#4000)
    - Fixed a bug where rootless Podman on systems using CGroups V2
      would not function with the cgroupfs CGroups manager
    - Fixed a bug where rootless Podman could not correctly identify
      the DBus session address, causing containers to fail to start
      (#4162)
    - Fixed a bug where rootless Podman with slirp4netns networking
      would fail to start containers due to mount leaks
  * Misc
    - Significant changes were made to Podman volumes in this
      release. If you have pre-existing volumes, it is strongly
      recommended to run podman system renumber after upgrading.
    - Version 0.8.1 or greater of the CNI Plugins is now required for
      Podman
    - Version 2.0.1 or greater of Conmon is strongly recommended
    - Updated vendored Buildah to v1.11.2
    - Updated vendored containers/storage library to v1.13.4
    - Improved error messages when trying to create a pod with no
      name via podman play kube
    - Improved error messages when trying to run podman pause or
      podman stats on a rootless container on a system without
      CGroups V2 enabled
    - TMPDIR has been set to /var/tmp by default to better handle
      large temporary files
    - podman wait has been optimized to detect stopped containers
      more rapidly
    - Podman containers now include a ContainerManager annotation
      indicating they were created by libpod
    - The podman info command now includes information about
      slirp4netns and fuse-overlayfs if they are available
    - Podman no longer sets a default size of 65kb for tmpfs
      filesystems
    - The default Podman CNI network has been renamed in an attempt
      to prevent conflicts with CRI-O when both are run on the same
      system. This should only take effect on system restart
    - The output of podman volume inspect has been more closely
      matched to docker volume inspect

-------------------------------------------------------------------
Thu Sep  5 15:26:01 UTC 2019 - Marco Vedovati <mvedovati@suse.com>

- Add katacontainers as a recommended package, and include it as an
  additional OCI runtime in the configuration.

-------------------------------------------------------------------
Tue Aug 27 08:04:20 UTC 2019 - Marco Vedovati <mvedovati@suse.com>

- Update podman to v1.5.1
 * Features
   - The hostname of pods is now set to the pod's name
 * Bugfixes
   - Fixed a bug where podman run and podman create did not honor the --authfile
     option (#3730)
   - Fixed a bug where containers restored with podman container restore
     --import would incorrectly duplicate the Conmon PID file of the original container
   - Fixed a bug where podman build ignored the default OCI runtime configured
     in libpod.conf
   - Fixed a bug where podman run --rm (or force-removing any running container
     with podman rm --force) were not retrieving the correct exit code (#3795)
   - Fixed a bug where Podman would exit with an error if any configured hooks
     directory was not present
   - Fixed a bug where podman inspect and podman commit would not use the
     correct CMD for containers run with podman play kube
   - Fixed a bug created pods when using rootless Podman and CGroups V2 (#3801)
   - Fixed a bug where the podman events command with the --since or --until
     options could take a very long time to complete
 * Misc
   - Rootless Podman will now inherit OCI runtime configuration from the root
     configuration (#3781)
   - Podman now properly sets a user agent while contacting registries (#3788)

- Add zsh completion for podman commands

-------------------------------------------------------------------
Wed Aug 14 08:26:22 UTC 2019 - Sascha Grunert <sgrunert@suse.com>

- Update podman to v1.5.0
  * Features
    - Podman containers can now join the user namespaces of other
      containers with --userns=container:$ID, or a user namespace at
      an arbitary path with --userns=ns:$PATH
    - Rootless Podman can experimentally squash all UIDs and GIDs in
      an image to a single UID and GID (which does not require use of
      the newuidmap and newgidmap executables) by passing
      --storage-opt ignore_chown_errors
    - The podman generate kube command now produces YAML for any bind
      mounts the container has created (#2303)
    - The podman container restore command now features a new flag,
      --ignore-static-ip, that can be used with --import to import a
      single container with a static IP multiple times on the same
      host
    - Added the ability for podman events to output JSON by
      specifying --format=json
    - If the OCI runtime or conmon binary cannot be found at the
      paths specified in libpod.conf, Podman will now also search for
      them in the calling user's path
    - Added the ability to use podman import with URLs (#3609)
    - The podman ps command now supports filtering names using
      regular expressions (#3394)
    - Rootless Podman containers with --privileged set will now mount
      in all host devices that the user can access
    - The podman create and podman run commands now support the
      --env-host flag to forward all environment variables from the
      host into the container
    - Rootless Podman now supports healthchecks (#3523)
    - The format of the HostConfig portion of the output of podman
      inspect on containers has been improved and synced with Docker
    - Podman containers now support CGroup namespaces, and can create
      them by passing --cgroupns=private to podman run or podman
      create
    - The podman create and podman run commands now support the
      --ulimit=host flag, which uses any ulimits currently set on the
      host for the container
    - The podman rm and podman rmi commands now use different exit
      codes to indicate 'no such container' and 'container is
      running' errors
    - Support for CGroups V2 through the crun OCI runtime has been
      greatly improved, allowing resource limits to be set for
      rootless containers when the CGroups V2 hierarchy is in use
  * Bugfixes
    - Fixed a bug where a race condition could cause podman restart
      to fail to start containers with ports
    - Fixed a bug where containers restored from a checkpoint would
      not properly report the time they were started at
    - Fixed a bug where podman search would return at most 25
      results, even when the maximum number of results was set higher
    - Fixed a bug where podman play kube would not honor capabilities
      set in imported YAML (#3689)
    - Fixed a bug where podman run --env, when passed a single key
      (to use the value from the host), would set the environment
      variable in the container even if it was not set on the host
      (#3648)
    - Fixed a bug where podman commit --changes would not properly
      set environment variables
    - Fixed a bug where Podman could segfault while working with
      images with no history
    - Fixed a bug where podman volume rm could remove arbitrary
      volumes if given an ambiguous name (#3635)
    - Fixed a bug where podman exec invocations leaked memory by not
      cleaning up files in tmpfs
    - Fixed a bug where the --dns and --net=container flags to podman
      run and podman create were not mutually exclusive (#3553)
    - Fixed a bug where rootless Podman would be unable to run
      containers when less than 5 UIDs were available
    - Fixed a bug where containers in pods could not be removed
      without removing the entire pod (#3556)
    - Fixed a bug where Podman would not properly clean up all CGroup
      controllers for created cgroups when using the cgroupfs CGroup
      driver
    - Fixed a bug where Podman containers did not properly clean up
      files in tmpfs, resulting in a memory leak as containers
      stopped
    - Fixed a bug where healthchecks from images would not use
      default settings for interval, retries, timeout, and start
      period when they were not provided by the image (#3525)
    - Fixed a bug where healthchecks using the HEALTHCHECK CMD format
      where not properly supported (#3507)
    - Fixed a bug where volume mounts using relative source paths
      would not be properly resolved (#3504)
    - Fixed a bug where podman run did not use authorization
      credentials when a custom path was specified (#3524)
    - Fixed a bug where containers checkpointed with podman container
      checkpoint did not properly set their finished time
    - Fixed a bug where running podman inspect on any container not
      created with podman run or podman create (for example, pod
      infra containers) would result in a segfault (#3500)
    - Fixed a bug where healthcheck flags for podman create and
      podman run were incorrectly named (#3455)
    - Fixed a bug where Podman commands would fail to find targets if
      a partial ID was specified that was ambiguous between a
      container and pod (#3487)
    - Fixed a bug where restored containers would not have the
      correct SELinux label
    - Fixed a bug where Varlink endpoints were not working properly
      if more was not correctly specified
    - Fixed a bug where the Varlink PullImage endpoint would crash if
      an error occurred (#3715)
    - Fixed a bug where the --mount flag to podman create and podman
      run did not allow boolean arguments for its ro and rw options
      (#2980)
    - Fixed a bug where pods did not properly share the UTS
      namespace, resulting in incorrect behavior from some utilities
      which rely on hostname (#3547)
    - Fixed a bug where Podman would unconditionally append
      ENTRYPOINT to CMD during podman commit (and when reporting CMD
      in podman inspect) (#3708)
    - Fixed a bug where podman events with the journald events
      backend would incorrectly print 6 previous events when only new
      events were requested (#3616)
    - Fixed a bug where podman port would exit prematurely when a
      port number was specified (#3747)
    - Fixed a bug where passing . as an argument to the --dns-search
      flag to podman create and podman run was not properly clearing
      DNS search domains in the container
  * Misc
    - Updated vendored Buildah to v1.10.1
    - Updated vendored containers/image to v3.0.2
    - Updated vendored containers/storage to v1.13.1
    - Podman now requires conmon v2.0.0 or higher
    - The podman info command now displays the events logger being in
      use
    - The podman inspect command on containers now includes the ID of
      the pod a container has joined and the PID of the container's
      conmon process
    - The -v short flag for podman --version has been re-added
    - Error messages from podman pull should be significantly clearer
    - The podman exec command is now available in the remote client
    - The podman-v1.5.0.tar.gz file attached is podman packaged for
      MacOS. It can be installed using Homebrew.
- Use new conmon package as direct dependency
- Remove internal conmon package
- Update libpod.conf to support latest path discovery feature for
  `runc` and `conmon` binaries.
- Re-enable 32bit build

-------------------------------------------------------------------
Thu Jul 25 09:20:47 UTC 2019 - Richard Brown <rbrown@suse.com>

- Update libpod.conf to use correct infra_command

-------------------------------------------------------------------
Thu Jul 18 10:12:43 UTC 2019 - Richard Brown <rbrown@suse.com>

- Update libpod.conf to use better versioned pause container

-------------------------------------------------------------------
Wed Jul 17 14:53:38 UTC 2019 - Richard Brown <rbrown@suse.com>

- Update libpod.conf to use official kubic pause container

-------------------------------------------------------------------
Wed Jul 10 13:55:09 UTC 2019 - Marco Vedovati <mvedovati@suse.com>

- Update libpod.conf to match latest features set:
  detach_keys, lock_type, runtime_supports_json

-------------------------------------------------------------------
Mon Jul  8 10:46:43 UTC 2019 - Marco Vedovati <mvedovati@suse.com>

- Add podman-remote varlink client
- Update podman to v1.4.4
  * Features
    - Podman now has greatly improved support for containers using multiple OCI
      runtimes. Containers now remember if they were created with a different
      runtime using --runtime and will always use that runtime
    - The cached and delegated options for volume mounts are now allowed for
      Docker compatability (#3340)
    - The podman diff command now supports the --latest flag
  * Bugfixes
    - Fixed a bug where rootless Podman would attempt to use the entire root
      configuration if no rootless configuration was present for the user,
      breaking rootless Podman for new installations
    - Fixed a bug where rootless Podman's pause process would block SIGTERM,
      preventing graceful system shutdown and hanging until the system's init
      send SIGKILL
    - Fixed a bug where running Podman as root with sudo -E would not work after
      running rootless Podman at least once
    - Fixed a bug where options for tmpfs volumes added with the --tmpfs flag
      were being ignored
    - Fixed a bug where images with no layers could not properly be displayed
      and removed by Podman
    - Fixed a bug where locks were not properly freed on failure to create a
      container or pod
    - Fixed a bug where podman cp on a single file would create a directory at
      the target and place the file in it (#3384)
    - Fixed a bug where podman inspect --format '{{.Mounts}}' would print a
      hexadecimal address instead of a container's mounts
    - Fixed a bug where rootless Podman would not add an entry to container's
      /etc/hosts files for their own hostname (#3405)
    - Fixed a bug where podman ps --sync would segfault (#3411)
    - Fixed a bug where podman generate kube would produce an invalid ports
      configuration (#3408)
  * Misc
    - Updated containers/storage to v1.12.13
    - Podman now performs much better on systems with heavy I/O load
    - The --cgroup-manager flag to podman now shows the correct default setting
      in help if the default was overridden by libpod.conf
    - For backwards compatability, setting --log-driver=json-file in podman run
      is now supported as an alias for --log-driver=k8s-file. This is considered
      deprecated, and json-file will be moved to a new implementation in the
      future ([#3363](https://github.com/containers/libpo\
      d/issues/3363))
    - Podman's default libpod.conf file now allows the crun OCI runtime to be
      used if it is installed

-------------------------------------------------------------------
Wed Jun 26 11:24:32 UTC 2019 - Robert Frohl <rfrohl@suse.com>

- Update podman to v1.4.2
  - Fixed a bug where Podman could not run containers using an older version of
    Systemd as init
  - Updated vendored Buildah to v1.9.0 to resolve a critical bug with
    Dockerfile RUN instructions
  - The error message for running podman kill on containers that are not
    running has been improved
  - Podman remote client can now log to a file if syslog is not available
  - The podman exec command now sets its error code differently based on
    whether the container does not exist, and the command in the container does
    not exist
  - The podman inspect command on containers now outputs Mounts JSON that matches
    that of docker inspect, only including user-specified volumes and
    differentiating bind mounts and named volumes
  - The podman inspect command now reports the path to a container's OCI spec
    with the OCIConfigPath key (only included when the container is initialized
    or running)
  - The podman run --mount command now supports the bind-nonrecursive option for
    bind mounts
  - Fixed a bug where podman play kube would fail to create containers due to an
    unspecified log driver
  - Fixed a bug where Podman would fail to build with musl libc
  - Fixed a bug where rootless Podman using slirp4netns networking in an
    environment with no nameservers on the host other than localhost would
    result in nonfunctional networking
  - Fixed a bug where podman import would not properly set environment
    variables, discarding their values and retaining only keys
  - Fixed a bug where Podman would fail to run when built with Apparmor support
    but run on systems without the Apparmor kernel module loaded
  - Remote Podman will now default the username it uses to log in to remote
    systems to the username of the current user
  - Podman now uses JSON logging with OCI runtimes that support it, allowing for
    better error reporting
  - Updated vendored containers/image to v2.0
- Update conmon to v0.3.0
  - Support OOM Monitor under cgroup V2
  - Add config binary and make target for configuring conmon with a go library
    for importing values

-------------------------------------------------------------------
Mon Jun 24 09:36:12 UTC 2019 - Robert Frohl <rfrohl@suse.com>

- update dependency for slirp4netns to 0.3.0 or newer

-------------------------------------------------------------------
Tue Jun 11 06:43:28 UTC 2019 - Sascha Grunert <sgrunert@suse.com>

- Update podman to v1.4.0:
  - The podman checkpoint and podman restore commands can now be
    used to migrate containers between Podman installations on
    different systems
  - The podman cp command now supports a pause flag to pause
    containers while copying into them
  - The remote client now supports a configuration file for
    pre-configuring connections to remote Podman installations
  - Fixed CVE-2019-10152 - The podman cp command improperly
    dereferenced symlinks in host context
  - Fixed a bug where podman commit could improperly set
    environment variables that contained = characters
  - Fixed a bug where rootless Podman would sometimes fail to start
    containers with forwarded ports
  - Fixed a bug where podman version on the remote client could
    segfault
  - Fixed a bug where podman container runlabel would use
    /proc/self/exe instead of the path of the Podman command when
    printing the command being executed
  - Fixed a bug where filtering images by label did not work
  - Fixed a bug where specifying a bing mount or tmpfs mount over
    an image volume would cause a container to be unable to start
  - Fixed a bug where podman generate kube did not work with
    containers with named volumes
  - Fixed a bug where rootless Podman would receive permission
    denied errors accessing conmon.pid
  - Fixed a bug where podman cp with a folder specified as target
    would replace the folder, as opposed to copying into it
  - Fixed a bug where rootless Podman commands could double-unlock
    a lock, causing a crash
  - Fixed a bug where Podman incorrectly set tmpcopyup on /dev/
    mounts, causing errors when using the Kata containers runtime
  - Fixed a bug where podman exec would fail on older kernels
  - The podman commit command is now usable with the Podman remote
    client
  - The --signature-policy flag (used with several image-related
    commands) has been deprecated
  - The podman unshare command now defines two environment
    variables in the spawned shell: CONTAINERS_RUNROOT and
    CONTAINERS_GRAPHROOT, pointing to temporary and permanent
    storage for rootless containers
  - Updated vendored containers/storage and containers/image
    libraries with numerous bugfixes
  - Updated vendored Buildah to v1.8.3
  - Podman now requires Conmon v0.2.0
  - The podman cp command is now aliased as podman container cp
  - Rootless Podman will now default init_path using root Podman's
    configuration files (/etc/containers/libpod.conf and
    /usr/share/containers/libpod.conf) if not overridden in the
    rootless configuration

-------------------------------------------------------------------
Fri Jun  7 11:48:27 UTC 2019 - Sascha Grunert <sgrunert@suse.com>

- Add fuse-overlayfs dependency to support overlay based rootless image
  manipulations

-------------------------------------------------------------------
Wed May 29 14:16:08 UTC 2019 - Sascha Grunert <sgrunert@suse.com>

- Update podman to v1.3.2:
  - Fixed a bug where podman would fail to run if a volume was
    mounted over an image volume

-------------------------------------------------------------------
Wed May 22 07:04:24 UTC 2019 - Sascha Grunert <sgrunert@suse.com>

- Update podman to v1.3.1:
  - The podman cp command can now read input redirected to STDIN, and output to
    STDOUT instead of a file, using - instead of an argument.
  - The Podman remote client now displays version information from both the
    client and server in podman version
  - The podman unshare command has been added, allowing easy entry into the
    user namespace set up by rootless Podman (allowing the removal of files
    created by rootless Podman, among other things)
  - Fixed a bug where Podman containers with the --rm flag were removing
    created volumes when they were automatically removed
  - Fixed a bug where container and pod locks were incorrectly marked as
    released after a system reboot, causing errors on container and pod removal
  - Fixed a bug where Podman pods could not be removed if any container in the
    pod encountered an error during removal
  - Fixed a bug where Podman pods run with the cgroupfs CGroup driver would
    encounter a race condition during removal, potentially failing to remove
    the pod CGroup
  - Fixed a bug where the podman container checkpoint and podman container
    restore commands were not visible in the remote client
  - Fixed a bug where podman remote ps --ns would not print the container's
    namespaces
  - Fixed a bug where removing stopped containers with healthchecks could cause
    an error
  - Fixed a bug where the default libpod.conf file was causing parsing errors
  - Fixed a bug where pod locks were not being freed when pods were removed,
    potentially leading to lock exhaustion
  - Fixed a bug where 'podman run' with SD_NOTIFY set could, on short-running
    containers, create an inconsistent state rendering the container unusable
  - The remote Podman client now uses the Varlink bridge to establish remote
    connections by default
- Update conmon to 0.2.0 and switched to containers/conmon upstream project

-------------------------------------------------------------------
Fri May 17 12:08:37 UTC 2019 - Sascha Grunert <sgrunert@suse.com>

- Update `systemd-devel` to actually be `pkgconfig(libsystemd)` to allow OBS to
  shortcut through systemd-mini-devel

-------------------------------------------------------------------
Thu May 16 15:04:52 UTC 2019 - Sascha Grunert <sgrunert@suse.com>

- Update podman to v1.3.0
  * Podman now supports container restart policies! The --restart-policy flag
    on podman create and podman run allows containers to be restarted after
    they exit. Please note that Podman cannot restart containers after a system
    reboot - for that, see our next feature
  * Podman podman generate systemd command was added to generate systemd unit
    files for managing Podman containers
  * The podman runlabel command now allows a $GLOBAL_OPTS variable, which will
    be populated by global options passed to the podman runlabel command,
    allowing custom storage configurations to be passed into containers run
    with runlabel
  * The podman play kube command now allows File and FileOrCreate volumes
  * The podman pod prune command was added to prune unused pods
  * Added the podman system migrate command to migrate containers using older
    configurations to allow their use by newer Libpod versions
  * Podman containers now forward proxy-related environment variables from the
    host into the container with the --http-proxy flag (enabled by default)
  * Read-only Podman containers can now create tmpfs filesystems on /tmp,
    /var/tmp, and /run with the --read-only-tmpfs flag (enabled by default)
  * The podman init command was added, performing all container pre-start tasks
    without starting the container to allow pre-run debugging
- Update conmon to cri-o v1.14.1
- Update libpod.conf to match latest feature set

-------------------------------------------------------------------
Mon Apr  1 14:05:35 UTC 2019 - Richard Brown <rbrown@suse.com>

- Update to podman 1.2.0
  * Podman now supports image healthchecks! The podman healthcheck run command was added to manually run healthchecks, and the status of a running healthcheck can be viewed via podman inspect
  * The podman events command was added to show a stream of significant events
  * The podman ps command now supports a --watch flag that will refresh its output on a given interval
  * The podman image tree command was added to show a tree representation of an image's layers
  * The podman logs command can now display logs for multiple containers at the same time
  * The podman exec command can now pass file descriptors to the process being executed in the container via the --preserve-fds option
  * The podman images command can now filter images by reference
  * The podman system df command was added to show disk usage by Podman
  * The --add-host option can now be used by containers sharing a network namespace
  * The podman cp command now has an --extract option to extract the contents of a Tar archive and copy them into the container, instead of copying the archive itself
  * Podman now allows manually specifying the path of the slirp4netns binary for rootless networking via the --network-cmd-path flag
  * Rootless Podman can now be used with a single UID and GID, without requiring a full 65536 UIDs/GIDs to be allocated in /etc/subuid and /etc/subgid
  * The podman runlabel command now supports the --replace option to replace containers using the name requested
  * Infrastructure containers for Podman pods will now attempt to use the image's CMD and ENTRYPOINT instead of a fixed command
  * The podman play kube command now supports the HostPath and VolumeMounts YAML fields
  * Added support to disable creation of resolv.conf or /etc/hosts in containers by specifying --dns=none and --no-hosts, respectively, to podman run and podman create
  * The podman version command now supports the {{ json . }} template (which outputs JSON)
  * Podman can now forward ports using the SCTP protocol
- Update conmon to cri-o 1.14.0
- Stop building for i586 (not supported by upstream, does not build)

-------------------------------------------------------------------
Fri Mar 22 21:02:05 UTC 2019 - Flavio Castelli <fcastelli@suse.com>

- Change default libpod.conf configuration file: use the runtimes
  section to allow users to specify different OCI runtimes. This
  allows user to choose which runtime to use on a per container
  basis.

-------------------------------------------------------------------
Tue Mar 19 13:15:38 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>

- Add 'apparmor-parser' to list of requires (boo#1123387)

-------------------------------------------------------------------
Sat Mar 16 08:33:38 UTC 2019 - Jan Engelhardt <jengelh@inai.de>

- Scriptlets contain sh-compatible code, so drop -p /bin/bash.

-------------------------------------------------------------------
Fri Mar  8 09:47:25 UTC 2019 - Richard Brown <rbrown@suse.com>

- podman-cni-config: remove artificial conflicts with kubelet

-------------------------------------------------------------------
Thu Mar  7 15:22:22 UTC 2019 - Richard Brown <rbrown@suse.com>

- Disable build with PIE on ppc64le to avoid boo#1098017

-------------------------------------------------------------------
Wed Mar  6 14:07:01 UTC 2019 - Richard Brown <rbrown@suse.com>

- Update to v1.1.2
  * Fixed a bug where the podman image list, podman image rm, and podman container list had broken global storage options
  * Fixed a bug where the --label option to podman create and podman run was missing the -l alias
  * Fixed a bug where running Podman with the --config flag would not set an appropriate default value for tmp_dir
  * Fixed a bug where the podman logs command with the --timestamps flag produced unreadable output
  * Fixed a bug where the podman cp command would automatically extract .tar files copied into the container
  * The podman container stop command is now usable with the Podman remote client

-------------------------------------------------------------------
Mon Mar  4 11:27:03 UTC 2019 - Flavio Castelli <fcastelli@suse.com>

- Update to v1.1.1
  * Update release notes for v1.1.1
  * Pull image for runlabel if not local
  * Fix SystemExec completion race
  * Fix link inconsistencies in man pages
  * Verify that used OCI runtime supports checkpoint
  * Should be defaulting to pull not pull-always
  * podman-commands script: refactor
  * Move Alias lines to descriptions of commands
  * Fix usage messages for podman image list, rm
  * Fix -s to --storage-driver in baseline test
  * No podman container ps command exists
  * Allow Exec API user to override streams
  * fix up a number of misplace commands
  * rootless, new[ug]idmap: on failure add output
  * [ci skip] Critical note about merge bot
  * podman port fix output
  * Fix ignored --time argument to podman restart
  * secrets: fix fips-mode with user namespaces
  * Fix four errors tagged by Cobra macro debugging
  * Clean up man pages to match commands
  * Add debugging for errors to Cobra compatibility macros
  * Command-line input validation: reject unused args
  * Fix ignored --stop-timeout flag to 'podman create'
  * fixup! Incorporate review feedback
  * fixup! missed some more:
  * fixup! Correction to 'checkpoint'
  * Followup to #2456: update examples, add trust
  * podman create: disable interspersed opts
  * fix up a number of misplace commands
  * Add a task to Cirrus gating to build w/o Varlink
  * Skip checkpoint/restore tests on Fedora for now
  * Fix build for non-Varlink-tagged Podman
  * Remove restore as podman subcommand
  * Better usage synopses for subcommands
  * Bump gitvalidation epoch
  * Bump to v1.2.0-dev
  * Centralize setting default volume path
  * Ensure volume path is set appropriately by default
  * Move all storage configuration defaults into libpod
  * rename pod when we have a name collision with a container
  * podman remote-client readme
- Update package to ship varlink required files

-------------------------------------------------------------------
Wed Feb 27 09:01:41 UTC 2019 - Richard Brown <rbrown@suse.com>

- Update to v1.1.0
  * Added --latest and --all flags to podman mount and podman umount
  * Rootless Podman can now forward ports into containers (using the same -p and -P flags as root Podman)
  * Rootless Podman will now pull some configuration options (for example, OCI runtime path) from the default root libpod.conf if they are not explicitly set in the user's own libpod.conf
  * Added an alias -f for the --format flag of the podman info and podman version commands
  * Added an alias -s for the --size flag of the podman inspect command
  * Added the podman system info and podman system prune commands
  * Added the podman cp command to copy files between containers and the host
  * Added the --password-stdin flag to podman login
  * Added the --all-tags flag to podman pull
  * The --rm and --detach flags can now be used together with podman run
  * The podman start and podman run commands for containers in pods will now start dependency containers if they are stopped
  * Added the podman system renumber command to handle lock changes
  * The --net=host and --dns flags for podman run and podman create no longer conflict
  * Podman now handles mounting the shared /etc/resolv.conf from network namespaces created by ip netns add when they are passed in via podman run --net=ns:
  * Various bugfixes - full changelog https://github.com/containers/libpod/releases/tag/v1.1.0
- Removed obsolete patch containers-libpod-pull-2225.diff

-------------------------------------------------------------------
Tue Feb 26 17:17:32 UTC 2019 - Richard Brown <rbrown@suse.com>

- Update to conmon from cri-o v1.13.1
  * oci: read conmon process status

-------------------------------------------------------------------
Tue Feb 19 15:35:30 UTC 2019 - Richard Brown <rbrown@suse.com>

- Upgrade to v1.0.1
  * rootless: join both userns and mount namespace with --pod
  * rootless: create the userns immediately when creating a new pod
  * Preserve exited state across reboot
  * podman image prune -- implement all flag
  * Add varlink support for prune
  * Make --quiet work in podman create/run
  * rootless: fix --pid=host without --privileged
  * podman-inspect: don't ignore errors

-------------------------------------------------------------------
Wed Jan 30 22:57:51 UTC 2019 - Duncan Mac-Vicar <dmacvicar@suse.de>

- Fix rootless mode with AppArmor
  https://github.com/containers/libpod/pull/2225
  Add patch containers-libpod-pull-2225.diff

-------------------------------------------------------------------
Mon Jan 28 10:32:38 UTC 2019 - Richard Brown <rbrown@suse.com>

- Stop using conmon from random git commits, use cri-o releases
- Update to conmon from cri-o v1.13.0
  * Solve gh#containers/libpod#527
- Tidy up .gitignore files from podman-1.0.0.tar.xz

-------------------------------------------------------------------
Thu Jan 17 11:44:58 UTC 2019 - Jordi Massaguer <jmassaguerpla@suse.com>

- Update requirement to go1.11 to stay in sync with CaaSP4 and use the same
  version as k8s and cri-o to prevent "weird" issues because of the go version
  (we had problems mixing go1.5 and go1.6 in the past)

-------------------------------------------------------------------
Wed Jan 16 09:42:52 UTC 2019 - Richard Brown <rbrown@suse.com>

- Update libpod.conf to better align with upstream defaults [boo#1122024]
- Require catatonit for new --init flag

-------------------------------------------------------------------
Sun Jan 13 15:39:42 UTC 2019 - Richard Brown <rbrown@suse.com>

- Upgrade to v1.0.0
  * The podman exec command now includes a --workdir option to set working directory for the executed command
  * The podman create and podman run commands now support the --init flag to use a minimal init process in the container
  * Added the podman image sign command to GPG sign images
  * The podman run --device flag now accepts directories, and will added any device nodes in the directory to the container
  * Added the podman play kube command to create pods and containers from Kubernetes pod YAML
  * Rootless containers now unconditionally use postrun cleanup processes, ensuring resources are freed when the container stops
  * Pulling images has been parallelized, allowing individual layers to be pulled in parallel

-------------------------------------------------------------------
Tue Jan  8 11:20:42 UTC 2019 - Richard Brown <rbrown@suse.com>

- Update to v0.12.1.2
  * Rootless Podman now creates the storage.conf, libpod.conf, and mounts.conf configuration files automatically in ~/.config/containers/ for ease of reconfiguration
  * The podman pod create command can expose ports in the pod's network namespace, allowing public services to be created in pods
  * The podman container checkpoint command can now keep containers running after they are checkpointed with the --leave-running flag
  * The podman container checkpoint and podman container restore commands now support the --tcp-established flag to checkpoint and restore containers with active TCP connections
  * The podman version command now has a --format flag to produce machine-readable output
  * Added the podman container exists, podman pod exists, and podman image exists commands to easily check for a container/pod/image, respectively, by name or ID
  * The podman ps --pod flag now has a short alias, -p
  * The podman rmi and podman rm commands now have a --prune flag to prune unused images and containers, respectively
  * The podman ps command now has a --sync flag to force a sync of Podman's state against the OCI runtime, resolving some state desync errors
  * Added the podman volume set of commands for creating and managing local-only named volumes
  * Added the podman generate kube command to generate Kubernetes Pod and Service YAML for Podman containers and pods
  * The podman pod stop flag now accepts a --timeout flag to set the timeout for stopping containers in the pod

-------------------------------------------------------------------
Tue Dec 18 09:40:40 UTC 2018 - Marco Vedovati <mvedovati@suse.com>

- Update package summary and description

-------------------------------------------------------------------
Fri Dec  7 07:42:47 UTC 2018 - Adrian Schröter <adrian@suse.de>

- add dependency to iptables, build fails otherwise

-------------------------------------------------------------------
Fri Nov 16 08:22:48 UTC 2018 - Valentin Rothberg <vrothberg@suse.com>

- Changelog for v0.11.1.1 (2018-11-15)
  * Increase pidWaitTimeout to 60s
  * rootless: call IsRootless just once
  * Add space between num & unit in images output
  * Better document rootless containers
  * info: add rootless field
  * Do not hide errors when creating container with UserNSRoot
  * correct assignment of networkStatus
  * rootless: default to fuse-overlayfs when available

-------------------------------------------------------------------
Tue Nov 13 07:17:16 UTC 2018 - Valentin Rothberg <vrothberg@suse.com>

- Require golang >= 1.10.

-------------------------------------------------------------------
Fri Nov  9 07:46:46 UTC 2018 - Valentin Rothberg <vrothberg@suse.com>

- Changelog for v0.11.1 (2018-11-08)
  * update seccomp.json
  * Touch up --log* options and daemons in man pages
  * Don't fail if /etc/passwd or /etc/group does not exists
  * Properly set Running state when starting containers
  * If a container ceases to exist in runc, set exit status
  * rootless: mount /sys/fs/cgroup/systemd from the host
  * rootless: don't bind mount /sys/fs/cgroup/systemd in systemd mode
  * Add hostname to /etc/hosts
  * Remove conmon cgroup before pod cgroup for cgroupfs
  * Make kill, pause, and unpause parallel.
  * Fix long image name handling
  * Make restart parallel and add --all
  * rootless: do not add an additional /run to runroot
  * rootless: avoid hang on failed slirp4netns
  * Fix setting of version information
  * runtime: do not allow runroot longer than 50 characters
  * attach: fix attach when cuid is too long
  * truncate command output in ps by default
  * make various changes to ps output
  * Use two spaces to pad PS fields
  * fix bug in rm -fa parallel deletes
  * Ensure test container in running state
  * Add tests for selinux labels
  * Add --max-workers and heuristics for parallel operations
  * Increase security and performance when looking up groups
  * run prepare in parallel
  * runlabel: run any command
  * Explain the device format in man pages
  * Add --all and --latest to checkpoint/restore
  * Use more reliable check for rootless for firewall init
  * Make podman ps fast
  * Support auth file environment variable in podman build
  * fix environment variable parsing
  * Use the CRIU version check in checkpoint/restore
  * Handle http/https in registry given to login/out
  * correct stats err with non-running containers
  * Make rm faster
  * Fix man page to show info on storage

- Changelog for v0.10.1.3 (2018-10-17)
  * Vendor in new new buildah/ci
  * Fix podman in podman

- Changelog for v0.10.1.2 (2018-10-17)
  * Fix CGroup paths used for systemd CGroup mount

-------------------------------------------------------------------
Tue Oct 30 06:57:08 UTC 2018 - Valentin Rothberg <vrothberg@suse.com>

- Require slirp4netns to enable networking for unprivileged network namespaces
  aka networking for rootless podman.

-------------------------------------------------------------------
Wed Oct 17 06:07:29 UTC 2018 - Valentin Rothberg <vrothberg@suse.com>

- Changelog for v0.10.1.1 (2018-10-16)
  * Mount proper cgroup for systemd to manage inside of the container.
  * volume: resolve symlinks in paths
  * volume: write the correct ID of the container in error messages
  * Support auth file environment variable & add change to man pages
  * Generate a passwd file for users not in container

-------------------------------------------------------------------
Fri Oct 12 06:43:30 UTC 2018 - Valentin Rothberg <vrothberg@suse.com>

- Changelog for v0.10.1 (2018-10-11)
  * Sort all command flags
  * rootless: detect when user namespaces are not enabled
  * Log an otherwise ignored error from joining a net ns
  * Update manpages for --ip flag
  * Add --ip flag and plumbing into libpod
  * Document --net as an alias of --network in podman run & create
  * rootless: report more error messages from the startup phase
  * rootless: fix an hang on older versions of setresuid/setresgid
  * fix runlabel functions based on QA feedback
  * Stop containers in parallel fashion
  * runlabel: execute /proc/self/exe and avoid recursion
  * Ensure resolv.conf has the right label and path
  * completions: add checkpoint/restore completions
  * Add support to checkpoint/restore containers
  * selinux: drop superflous relabel
  * rootless: always set XDG_RUNTIME_DIR
  * Address review comments and fix ps output
  * Disable SELinux labeling if --privileged
  * Implement pod varlink bindings
  * Add --all flag to podman kill
  * Add container runlabel command
  * run complex image names with short names

-------------------------------------------------------------------
Mon Oct  1 05:51:48 UTC 2018 - Valentin Rothberg <vrothberg@suse.com>

- Update conmon to 4cd5a7c60349be0678d9f1b0657683324c1a2726 and fetch
  it from its new home https://github.com/kubernetes-sigs/cri-o.

- Changelog for v0.9.3.1 (2018-09-25)
  * Disable problematic SELinux code causing runc issues

- Changelog for v0.9.3 (2018-09-21)
  * Add --mount option for `create` & `run` command
  * Don't mount /dev/shm if the user told you --ipc=none
  * rootless: error out if there are not enough UIDs/GIDs available
  * Add new field to libpod to indicate whether or not to use labelling
  * Bind Mounts should be mounted read-only when in read-only mode
  * report when rootless
  * Don't crash if an image has no names

- Changelog for v0.9.2 (2018-09-14)
  * Don't mount /dev/* if user mounted /dev
  * rootless: do not raise an error if the entrypoint is specified
  * Add a way to disable port reservation
  * Do not set rlimits if we are rootless
  * Add --interval flag to podman wait
  * Add `podman rm --volumes` flag
  * Explicitly set default CNI network name in libpod.conf

- Changelog for v0.9.1.1 (2018-09-10)
  * Replace existing iptables handler with firewall code
  * Vendor CNI plugins firewall code
  * Fix displaying size on size calculation error

- Changelog for v0.9.1 (2018-09-07)
  * Fix pod sharing for utsmode
  * Respect user-added mounts over default spec mounts
  * use layer cache when building images
  * Start pod infra container when pod is created
  * Fix up libpod.conf man pages and referencese to it.
  * We should fail Podman with ExitCode 125 by default
  * Add CRI logs parsing to podman logs
  * rmi remove all not error when no images are present
  * rootless, create: support --pod
  * rootless, run: support --pod

-------------------------------------------------------------------
Mon Sep  3 06:04:26 UTC 2018 - Valentin Rothberg <vrothberg@suse.com>

- Changelog for v0.8.5 (2018-08-31)
  * Add proper support for systemd inside of podman
  * We are mistakenly seeing repos as registries.
  * Up time between checks for podman wait
  * Turn on test debugging
  * Add support for remote commands
  * fixup A few language changes and subuid(5)
  * Make the documentation of user namespace options in podman-run clearer
  * catch command-not-found errors
  * don't print help message for usage errors
  * docs: consistent format for example
  * docs: consistent headings
  * docs: make HISTORY consistent
  * docs: fix headers
  * varlink: fix --timeout usage
  * run/create: reserve `-h` flag for hostname
  * podman,varlink: inform user about --timeout 0
  * rootless: show an error when stats is used
  * rootless: show an error when pause/unpause are used
  * rootless: unexport GetUserNSForPid
  * rootless, exec: use the new function to join the userns
  * rootless: fix top
  * rootless: add new function to join existing namespace
  * Do not set max open files by default if we are rootless
  * Set default max open files in spec
  * Resolve /etc/resolv.conf before reading
  * document `--rm` semantics
  * rootless, search: do not create a new userns
  * rootless, login, logout: do not create a new userns
  * rootless, kill: do not create a new userns
  * rootless, stop: do not create a new userns
  * Fix manpage to note how multiple filters are combined
  * Fix handling of multiple filters in podman ps
  * Fix Mount Propagation
  * docs: add containers-mounts.conf(5)
  * docs: use "containers-" prefix for registries and storage
  * rootless: fix --pid=host
  * rootless: fix --ipc=host
  * spec: bind mount /sys only when userNS are enabled
  * rootless, tests: add test for --uts=host
  * rootless: don't use kill --all
  * rootless: exec handle processes that create an user namespace
  * rootless: fix exec

-------------------------------------------------------------------
Mon Aug 27 06:05:18 UTC 2018 - vrothberg@suse.com

- Changelog for v0.8.4 (2018-08-24)
  * Swap from FFJSON to easyjson
  * rootless: allow to override policy.json by the user
  * add completion for --pod in run and create
  * Fixed formatting and lowered verbosity of pod ps
  * Do not try to enable AppArmor in rootless mode
  * Reveal information about container capabilities
  * Fixing network ns segfault
  * Change pause container to infra container
  * Added option to share kernel namespaces in libpod and podman
  * Add podman pod top
  * Include pod stats and top in commands/completions
  * Fix syntax description of --ulimit command
  * Properly translate users into runc format for exec
  * rootless: fix --net host --privileged
  * Fixed segfault in stats where container had netNS none or from container
  * Enable pod stats with short ID and name
  * Touch up cert-dir in man pages
  * Support Attach subcommand in pypodman

-------------------------------------------------------------------
Mon Aug 20 06:40:02 UTC 2018 - vrothberg@suse.com

- Changelog for v0.8.3 (2018-08-17)
  * Switch from github.com/projectatomic to github.com/containers
  * Mention that systemd is the default cgroup manager
  * Fix handling of socket connection refusal.
  * podman: fix --uts=host
  * podman pod stats
  * Added reason to PodContainerError
  * Add Pod API to varlink.
  * Revert "spec: bind mount /sys only for rootless containers"
  * Document STORAGE_DRIVER and STORAGE_OPTS environment variable
  * Create pod CGroups when using the systemd cgroup driver
  * Switch systemd default CGroup parent to machine.slice
  * spec: bind mount /sys only for rootless containers
  * Add create and pull commands
  * rootless: not require userns for help/version
  * pkg/apparmor: use a pipe instead of a tmp file
  * podman in rootless mode will only work with cgroupfs at this point.
  * when searching, survive errors for multiple registries

-------------------------------------------------------------------
Mon Aug 13 06:32:40 UTC 2018 - vrothberg@suse.com

- Changelog for v0.8.2.1 (2018-08-11)
  * Ensure pod inspect is locked and validity-checked
  * Swap default CGroup manager to systemd

- Changelog for v0.8.2 (2018-08-10)
  * We need to sort mounts so that one mount does not over mount another.
  * search name should include registry
  * removeContainer: fix deadlock
  * Add FFJSON to build container
  * Add FFJSON generation to makefile
  * Fixed a bug setting dependencies on the wrong container
  * Always connect to the stdout and stderr of stream
  * apparmor: respect "unconfined" setting
  * oci.go: syslog: fix debug formatting
  * add podman pod inspect
  * Fix CGroupFS cgroup manager cgroup creation for pods
  * Pass newly-added --log-level flag to Conmon
  * Cleanup man pages
  * Improve ps handling of container start/stop time
  * rootless: fix user lookup if USER= is not set
  * Add dpkg support for returning oci/conmon versions
  * Have info print conmon/oci runtime information
  * Better pull error for fully-qualified images
  * Add Runc and Conmon versions to Podman Version

-------------------------------------------------------------------
Thu Aug  9 10:20:19 UTC 2018 - vrothberg@suse.com

- Add a dedicated conmon for podman as the requirements on the specific
  version started to differ from the ones of CRI-O.  This change implies
  dropping the requirement on the cri-o package.

- Add libpod.conf as a new source to allow tweaking the search paths
  for openSUSE.  This change makes execution slightly faster.

-------------------------------------------------------------------
Mon Aug  6 06:27:09 UTC 2018 - vrothberg@suse.com

- Changelog for v0.8.1 (2018-08-03)
  * Added ps --pod option
  * clarify pull error message
  * Man page fixes found by https://pagure.io/ManualPageScan
  * rootless: do not segfault if the parent already died
  * Document the properties of DefaultTransport a bit better.
  * Add --force to podman umount to force the unmounting of the rootfs
  * network: add support for rootless network with slirp4netns
  * Add documentations on how to setup /etc/subuid and /etc/subgid
  * podman rmi shouldn't delete named referenced images

-------------------------------------------------------------------
Mon Jul 30 05:45:52 UTC 2018 - vrothberg@suse.com

- Changelog for v0.7.4 (2018-07-27)
  * Add pod pause/unpause
  * Fix up docker compatibility messages
  * Fix handling of Linux network namespaces
  * Cleanup descriptions and help information
  * Add pod kill
  * Added pod restart
  * podman: allow to specify the IPC namespace to join
  * podman: allow to specify the UTS namespace to join
  * podman: allow to specify the PID namespace to join
  * podman: allow to specify the userns to join
  * spec: allow container:NAME network mode
  * Add libpod namespace to config
  * Add missing runtime.go lines to set namespace
  * Set namespace for new pods/containers based on runtime
  * Add --namespace flag to Podman
  * Update documentation for the State interface
  * Ensure pods are part of the set namespace when added
  * Enforce namespace checks on container add
  * Add container and pod namespaces to configs
  * AppArmor: runtime check if it's enabled on the host
  * Add format descriptors infor to podman top
  * docs/podman-top: fix typo and whitespace

-------------------------------------------------------------------
Mon Jul 23 06:18:32 UTC 2018 - vrothberg@suse.com

- Changelog for v0.7.3 (2018-07-20)
  * Podman load/tag/save prepend localhost when no repository is present
  * Pod ps now uses pod.Status()
  * Added pod start and stop
  * rootless: support a per-user mounts.conf
  * secrets: parse only one mounts configuration file
  * rootless: allow a per-user registries.conf file
  * rootless: allow a per-user storage.conf file
  * rootless, docs: document the libpod.conf file used in rootless mode
  * podman-top: use containers/psgo
  * oci: keep exposed ports busy and leak the fd into conmon
  * Fix ps filter with key=value labels
  * rootless: require subids to be present

-------------------------------------------------------------------
Mon Jul 16 05:37:36 UTC 2018 - vrothberg@suse.com

- Changelog for v0.7.2 (2018-07-13)
  * Only print container size JSON if --size was requested
  * Don't print rootfs and rw sizes if they're empty
  * Major fixes to podman ps --format=json output
  * Ignore running containers in ps exit-code filters
  * rootless: correctly propagate the exit status from the container
  * rootless: unshare mount namespace
  * Need to wait for container to exit before completing run/start completes
  * If proxy fails then then signal should be sent to the main process
  * fix pull image that includes a sha
  * Added full podman pod ps, with tests and man page
  * Podman pod create/rm commands with man page and tests.
  * Added created time to pod state
  * Support multiple networks
  * podman rmi should only untag image if parent of another
  * build: enable ostree in containers/storage when available
  * podman/libpod: add default AppArmor profile
  * rootless: propagate errors from GetRootlessRuntimeDir()
  * rootless: resolve the user home directory
  * rootless: fix when argv[0] is not an absolute path
  * urfave/cli: fix regression in short-opts parsing
  * Add --volumes-from flag to podman run and create
  * Mask /proc/keys to protect information leak about keys on host
  * Podman stats with no containers listed is the same as podman stats --all

- install missing podman (1) manpage

- podman-rpmlintrc: ignore missing-call-to-setgroups-before-setuid wari

- install bash completion at /usr/share/bash-completion/completions

- buildmode=pie: build position independent code

-------------------------------------------------------------------
Mon Jul  9 05:47:32 UTC 2018 - vrothberg@suse.com

- Changelog for v0.7.1 (2018-07-06)
  * Block use of /proc/acpi from inside containers
  * Remove per-container CGroup parents
  * rootless: add /run/user/$UID to the lookup paths
  * rootless: add function to retrieve the original UID
  * rootless: always set XDG_RUNTIME_DIR
  * rootless: set XDG_RUNTIME_DIR also for state and exec
  * urfave/cli: fix parsing of short opts
  * docs: Follow man-pages(7) suggestions for SYNOPSIS
  * Allow multiple mounts

- re-enable varlink support (build conditional)

-------------------------------------------------------------------
Mon Jul  2 05:53:26 UTC 2018 - vrothberg@suse.com

- Changelog for v0.6.5 (2018-06-29)
  * Fix built-in volume issue with podman run/create
  * Add `podman container cleanup` to CLI
  * Allow multiple containers and all for umount
  * Returning joining namespace error should not be fatal
  * Test to verify overlay quotas work, show container overhead on quota
  * Remove the --registry flag from podman search
  * utils: fix endless write of resize event
  * Start prints UUID or container name that user inputs on success
  * Fix podman hangs when detecting startup error in container attached mode
  * podman-build --help: update description
  * docs: add documentation for rootless containers
  * Add --authfile to podman search
  * Add podman-image and podman-container man page links
  * make varlink optional for podman

-------------------------------------------------------------------
Mon Jun 25 05:58:20 UTC 2018 - vrothberg@suse.com

- Changelog for v0.6.4 (2018-06-22)
  * Point podman-refresh at the right manpage
  * Add bash completions for podman refresh
  * Add manpages for podman refresh
  * Add podman refresh command
  * Add information about the configuration files to the install docs
  * Add unittests and fix bugs
  * Podman history now prints out intermediate image IDs
  * Add cap-add and cap-drop to build man page
  * Fix image volumes access and mount problems on restart
  * Add carriage return to log message when using --tty flag
  * Added --sort to ps
  * Fix podman build -q
  * Add extra debug so we can tell apart postdelete hooks
  * TLS verify is skipped per registry.
  * Add --all,-a flag to podman images
  * top: make output tabular
  * Add more network info ipv4/ipv6 and be more compatible with docker
  * Do not run iptablesDNS workaround on IPv6 addresses
  * Added --tls-verify functionality to podman search, with tests

-------------------------------------------------------------------
Mon Jun 18 05:46:23 UTC 2018 - vrothberg@suse.com

- Changelog for v0.6.3 (2018-06-15)
  * podman: use a different store for the rootless case
  * podman: do not use Chown in rootless mode
  * network: do not attempt to create a network in rootless mode
  * oci: do not set resources in rootless mode
  * oci: do not use hooks in rootless mode
  * oci: do not set the cgroup path in Rootless mode
  * spec: change mount options for /dev/pts in rootless mode
  * container: do not add shm in rootless mode
  * podman: provide a default UID mapping when non root
  * podman: accept option --rootfs to use exploded images
  * When setting a memory limit, also set a swap limit
  * Fix cleaning up network namespaces on detached ctrs
  * Implement --latest for ps
  * Added --sort flag to podman image
  * add podman container and image command
  * rmi: remove image if all tags are specified

-------------------------------------------------------------------
Mon Jun 11 06:22:30 UTC 2018 - vrothberg@suse.com

- Changelog for v0.6.2 (2018-06-08)
  * Vendor in latest buildah code
  * Update epoch to fix validation problems
  * Touch up whitespace issue in build man
  * Add disable-content flag info to man page for build
  * podman-run: clean up some formatting issues
  * Remove SELinux transition rule after conmon is started.
  * Add --all flag even though it is a noop so scripts will work
  * podman-varlink: log timeouts
  * bash completion: remove shebang
  * Vendor in latest containers/storage

-------------------------------------------------------------------
Fri Jun  8 14:26:33 UTC 2018 - dcassany@suse.com

- Make use of %license macro

-------------------------------------------------------------------
Tue Jun  5 13:36:00 UTC 2018 - vrothberg@suse.com

- Changelog for v0.6.1 (2018-06-01)
  * Fix lable handling
  * runtime: add /usr/libexec/podman/conmon to the conmon paths
  * varlink build
  * Add OnBuild support for podman build
  * return all inspect info for varlink containerinspect
  * hooks/exec: Allow successful reaps for 0s post-kill timeouts
  * fix panic with podman pull
  * Remove --net flag and make it an alias for --network
  * Clear all caps, except the bounding set, when --user is specified.
    Fix: bsc#1097970 CVE-2018-10856
  * do not allow port related args to be used with --network=container:
  * sort containers and images by create time
  * Cleanup man pages

-------------------------------------------------------------------
Tue May 29 12:35:47 UTC 2018 - parlt@suse.com

- Changelog for v0.5.4 (2018-05-25):
  * Make references to the Process part of Spec conditional
  * save and load should support multi-tag for docker-archive
  * Implement python podman create and start
  * Set Entrypoint from image only if not already set
  * Update podman build to match buildah bud functionality
  * Fix handling of command in images
  * Add support for Zulu timestamp parsing
  * Clarify using podman build with a URL, Git repo, or archive.
  * podman create, start, getattachsocket
  * oci-hooks.5: Discuss directory precedence and monitoring
  * Tighten the security on the podman varlink socket

-------------------------------------------------------------------
Tue May 22 10:16:03 UTC 2018 - parlt@suse.com

- Changelog for v0.5.3 (2018-05-18):
  * troubleshooting: Add console syntax highlighting
  * Refresh pods when refreshing podman state
  * Add per-pod CGroups
  * Add pod state
  * hooks: Fix monitoring of multiple directories
  * Add Troubleshooting guide
  * Add python3 package to podman
  * libpod: fix panic when using -t and the process fails to start
  * Allow push/save without image reference
  * Fix podman inspect bash completions
  * Support pulling Dockerfile from http
  * add more bash completions
  * implement varlink commit
  * fix segfault for podman push
  * Add the Podman Logo
  * hooks: Add package support for extension stages

-------------------------------------------------------------------
Mon May 14 08:33:11 UTC 2018 - vrothberg@suse.com

- Changelog for v0.5.2 (2018-05-11):
  * Fix varlink remove image force
  * Do not error trying to remove cgroups that don't exist
  * Remove parent cgroup we create with cgroupfs
  * Place Conmon and Container in separate CGroups
  * Add --cgroup-manager flag to Podman binary
  * Major fixes to systemd cgroup handling
  * Add validation for CGroup parents. Pass CGroups path into runc
  * varlink info
  * Dont eat the pull error message for varlink
  * podman push should honor registries.conf
  * alphabetize the varlink methods, types, and errors in the docs
  * Add missing newline to podman port
  * Fix calculation of RunningFor in ps json output
  * Should not error out if container no longer exists in oci
  * Make invalid state nonfatal when cleaning up in run
  * podman, userNS: configure an intermediate mount namespace
  * networking, userNS: configure the network namespace after create
  * Begin wiring in USERNS Support into podman

-------------------------------------------------------------------
Mon May  7 05:42:24 UTC 2018 - vrothberg@suse.com

- Remove runtime dependency on buildah, which isn't required anymore as
  libpod vendors in buildah's code directly.

- Changelog for v0.5.1 (2018-05-04):
  * Fix pulling from secure registry
  * Optionally init() during container restart
  * bashcompletion enhancements
  * Add directory for systemd socket and service if not present
  * varlink containers
  * Make podman commit to localhost rather then docker.io
  * Do not print unnecessary Buildah details during commit
  * Fix podman logout --all flag
  * podman should assign a host port to -p when omitted
  * libpod.conf: Podman's conmon path on openSUSE
  * correct varlink command in service file
  * Make ':' a restricted character for file names

-------------------------------------------------------------------
Mon Apr 30 06:53:09 UTC 2018 - vrothberg@suse.com

- Update podman to v0.4.4:
  * Use buildah commit and bud in podman
  * Remove systemd-cat support
  * Add --default-mounts-file hidden flag
  * Add isolation note to build man page
  * Strip transport from image name when looking for local image
  * Do not eat error messages from pullImage
  * Modify --user flag for podman create and run
  * add libpod.conf man page

-------------------------------------------------------------------
Mon Apr 23 08:37:57 UTC 2018 - parlt@suse.com

- Update podman to v0.4.3:
  * podman push without destination image
  * Add make .git target
  * Fix tests for podman run --attach
  * Vendor in latest containers/image and contaners/storage
  * It is OK to start an already running container (with no attach)
  * Allow podman start to attach to a running container
  * regression: tls verify should be set on registries.conf if insecure
  * ip validation game too strong
  * reverse host field order (ip goes first) - fix host string split to permit IPv6
  * Allow podman to exit exit codes of removed containers
  * validate dns-search values prior to creation
  * Add WaitContainerReady for wait for docker registry ready
  * podman pull should always try to pull
  * Allow the use of -i/-a on any container
  * Fix secrets patch

-------------------------------------------------------------------
Tue Apr 17 06:44:19 UTC 2018 - vrothberg@suse.com

- Require golang >= 1.9.

-------------------------------------------------------------------
Tue Apr 17 06:19:33 UTC 2018 - vrothberg@suse.com

- Update podman to v0.4.2:
  * Allowing attaching stdin to non-interactive containers
  * Fix terminal attach
  * Fix locking interaction in batched Exec() on container
  * Force host UID/GID mapping when creating containers
  * Do not lock all containers during pod kill
  * Do not lock all containers during pod start
  * Make pod stop lock one container at a time
  * Containers transitioning to stop should not break stats
  * Add -i to exec for compatibility reasons
  * Unescape characters in inspect JSON format output
  * Use buildah commit for podman commit

-------------------------------------------------------------------
Mon Apr  9 07:48:52 UTC 2018 - parlt@suse.com

- Update podman to v0.4.1:
  * Remove image via storage if a buildah container is associated
  * Add hooks support to podman
  * Run images with no names
  * Prevent a potential race when stopping containers
  * Only allocate tty when -t
  * Add conmon-pidfile flag to bash completions/manpages
  * --entrypoint= should delete existing entrypoint
  * Do not require Init() before Start()
  * Ensure dependencies are running before initializing containers
  * Add container dependencies to Inspect output
  * Vendor in latest containers/image
  * Change errorf to warnf in warning removing ctr storage

-------------------------------------------------------------------
Thu Apr  5 06:40:07 UTC 2018 - asarai@suse.com

- Split out podman's basic CNI configuration to podman-cni-config, to avoid
  breaking Kubernetes clusters due to misconfigured networking. On openSUSE we
  still install this configuration so things "just work" there.

-------------------------------------------------------------------
Tue Apr  3 05:41:54 UTC 2018 - vrothberg@suse.com

- Update podman to v0.3.5:
  * Allow sha256: prefix for input
  * Add secrets patch to podman
  * Only start containers that are not running in pod start
  * Check for duplicate names when generating new container and pod names.
  * podman: new option --conmon-pidfile=
  * Remove dependency on kubernetes
  * Vendor in lots of kubernetes stuff to shrink image size
  * cmd/podman/run.go: Error nicely when no image found
  * Update containers/storage to pick up overlay driver fix
  * First tag, untag THEN reload the image

-------------------------------------------------------------------
Mon Mar 26 05:57:07 UTC 2018 - vrothberg@suse.com

- Update podman to v0.3.4:
  * Make container env variable conditional
  * Small manpage reword
  * Document .containerenv in manpages. Move it to /run.
  * Add .containerenv file
  * Removing tagged images change in behavior
  * Image library stage 4 - create and commit
  * Add 'podman restart' asciinema

-------------------------------------------------------------------
Mon Mar 19 09:47:24 UTC 2018 - vrothberg@suse.com

- Remove old (redundant) source archive.

-------------------------------------------------------------------
Sat Mar 17 10:36:53 UTC 2018 - vrothberg@suse.com

- Do not compile commit hash into binary. `podman version` will not print
  the commit number as we are now following official releases.

- Change tar naming from commit to version to facilitate updates via the
  _service file.

- Update podman to v0.3.3.  This update includes several fixes and a new
  configuration file, libpod.conf.  By default, this config will be
  installed to /usr/share/containers and /etc/containers, whereas podman
  will always use the latter if present.  The config in
  /usr/share/containers can be used to check for new config options and
  will be replaced with each package update.  The libpod.conf config can
  be used to tweak some run-time paths of conmon, runc, etc., which is a
  more flexible approach than hard-coding those paths in podman.

Changelog:
  * Update containers/image
  * Add restart to main podman manpage
  * Add podman restart to podman bash completions and commands
  * Make manpage more clear
  * Add 'podman restart' command
  * Remove ability to specify mount label when mounting
  * Add signal proxying to podman run, start, and attach
  * We should not allow a user to mount a container with a different label
  * We should not have a default workdir
  * Add additional debug logging
  * Implement container restarting
  * sleep does not catch SIGTERM
  * Include tmpfs in inspect
  * Add run and search to commands page
  * Add new default location for conmon
  * podman-images: return correct image list
  * Remove crio.conf references from manpages
  * Fix a potential race around container removal in ps
  * podman ps command string too long
  * Podman load can pull in compressed files
  * Fix Conmon error to display Conmon paths
  * Add support to load runtime configuration from config file
  * Add default libpod config file
  * Change conmon and runtime paths to arrays
  * Update containers/storage to fix locking bug

-------------------------------------------------------------------
Thu Mar 15 15:24:23 UTC 2018 - vrothberg@suse.com

- Add requirement on cni-plugins to avoid potential issues in the
  future.
  feature#crio

-------------------------------------------------------------------
Tue Mar  6 11:00:09 UTC 2018 - vrothberg@suse.com

- Add run-time requirement on buildah to support `podman build`.
  feature#crio

-------------------------------------------------------------------
Tue Mar  6 08:01:37 UTC 2018 - vrothberg@suse.com

- Fix typo when setting the git commit at compile time.

-------------------------------------------------------------------
Sat Mar  3 14:20:06 UTC 2018 - vrothberg@suse.com

- Update podman to v0.3.1:
  * allow DNS resolution in containers
  * Adjust podman logs error message for clarity
  * Instead of erroring on exit file not being found, warn
  * podman logs -f: does not detect container stop or rm
  * Fix issue with podman logs on fresh containers
  * Replace usage of runc with runtime
  * Handle removing containers with active exec sessions
  * Ensure that Cleanup() will not run on active containers
  * Add tracking for exec session IDs
  * Add tracking for container exec sessions to DB
  * Small fixes to container Exec
  * docs/podman-info.1.md update man page
  * Update containers/storage
  * podman info add registries
  * podman stats add networking
  * CNIPluginDir: check "/usr/lib/cni"
  * remove build alias
  * Restrict top output to container's pids only
  * ps displays incorrect exit code
  * podman load dont panic when no repotags
  * Do not override user mounts
  * Tagging an image alias by shortname
  * Add support for --no-new-privs
  * podman ps json output use batched ops
  * CreateContainerStorage by image id
  * Implement --image-volumes for create and run
  * Add ability to start containers in a pod
  * Add kill and stop for pods
  * Add pod status command
  * Add tests and cleanup
  * Implement podman run option --cgroup-parent
  * Inspect output should be in array form
  * Add --time alias to manpages
  * Alias --time to --timeout for 'podman stop'
  * Resolve contention between copr and fedora repos
  * Ensure we don't repeatedly poll disk for exit codes
  * Change uptime format in `podman info` to human-readable

-------------------------------------------------------------------
Thu Feb 22 10:25:14 UTC 2018 - vrothberg@suse.com

- Replace macro by the entire URL in the spec file.

-------------------------------------------------------------------
Tue Feb 20 14:29:54 UTC 2018 - vrothberg@suse.com

- Add podman-rpmlintrc to ignore "explicit-lib-dependency" warnings. Those are
  intentional as we must include the libcontainers-* packages.
  + podman-rpmlintrc

- Update to podman v0.2.1 (change to semantic version scheme):
  * Run podman inside a podman container
  * Add FFJSON encoding/decoding for our container structs
  * images --all developer note
  * Add podman version
  * Touch up tutorial location and install reqs
  * No registries warning
  * Return imageid from podman pull
  * Squash logged errors from failed SQL rollbacks
  * Privileged containers should inherit host devices
  * Disable default Seccomp profile with privileged containers
  * Make libpod build on 32-bit systems
  * Add buckets for all containers and all pods
  * Containers in a pod can only join namespaces in that pod
  * Change json to match docker inspect
  * Honor ENTRYPOINT in image
  * Fix libpod to use given CGroup parent instead of a hardcoded one
  * podman logs: fix tailing
  * Allow removing pods with running containers if --force is given
  * Match podman inspect output to docker inspect
  * Touchup podman kill manpage
  * Change stop signal default to SIGTERM
  * Add podman search command
  * sysfs should be mounted rw for privileged
  * Need to add LISTEN_PID environment variable to conmon command
  * Add authfile, cert-dir and creds params to build

-------------------------------------------------------------------
Fri Feb  9 15:55:16 UTC 2018 - vrothberg@suse.com

- Add requirement on libcontainers-common, which now provides the
  /etc/containers/policy.json config.
- Use golang-packaging macros.
- Set version to +git%{rev_list} scheme as there's no official release yet.
- Spec file cleanups via spec-cleaner.
- Add requirement on libcontainers-{common,image,storage}, which provide
  configuration files, manpages and debugging tools useful and required by
  podman.

-------------------------------------------------------------------
Wed Feb  7 08:51:16 UTC 2018 - vrothberg@suse.com

- Fix typo to provide the correct package.
- Replace tabs with spaces.

-------------------------------------------------------------------
Mon Feb  5 06:40:05 UTC 2018 - vrothberg@suse.com

- Fix libostree-devel %if condition for TW, Leap 15+ and SLES 15+.

-------------------------------------------------------------------
Thu Feb  1 12:38:03 UTC 2018 - vrothberg@suse.com

- Use `%fdupes %buildroot/%_prefix` since `fdupes %buildroot` is not allowed
  because you cannot make hardlinks between certain partitions.

-------------------------------------------------------------------
Tue Jan 30 15:33:21 UTC 2018 - vrothberg@suse.com

- Add podman package: podman is a simple client only tool to help with
  debugging issues when daemons such as CRI runtime and the kubelet are not
  responding or failing.

Places

File podman.changes of Package podman (Revision 95a1298bd06b710da68337671fdd98c5)

Places