openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File dracut.changes of Package dracut (Revision 098d8b02cee3b4751a5333663b512899)

Currently displaying revision 098d8b02cee3b4751a5333663b512899 , Show latest

-------------------------------------------------------------------
Tue Aug  2 14:19:00 UTC 2016 - trenn@suse.de

- Fix DASD SSID handling (bsc#989313)
* Add 0501-dasd_fix_ssid_bigger_zero.patch

-------------------------------------------------------------------
Fri Jun 24 22:16:22 UTC 2016 - mfasheh@suse.com

- Advise user of fs recovery options when we fail to mount (fate#320443)
 * Add 0404-dracut-emergency-optionally-print-fs-help.patch

-------------------------------------------------------------------
Fri Jun  3 14:05:36 UTC 2016 - trenn@suse.de

- FCOE fix bsc#982588
  * Add 0212-fcoe_reorder_init_path.patch

-------------------------------------------------------------------
Tue May 31 12:53:28 UTC 2016 - meissner@suse.com

- fips-kernel-4.4-fixes.patch: adjust the kernel module list to
  match the SLES 12 SP2 kernel. (bsc#976577)

-------------------------------------------------------------------
Wed May  4 15:40:37 CEST 2016 - hare@suse.de

- Port missing SLES patches
  * Add 0197-95iscsi-Do-not-require-network-for-qla4xxx-flash-ses.patch
  * Add 0198-95iscsi-set-rd.iscsi.firmware-for-qla4xxx-sessions.patch
  * Remove 0194-95iscsi-Do-not-require-network-for-qla4xxx-flash-ses.patch
  * Remove 0195-95iscsi-set-rd.iscsi.firmware-for-qla4xxx-sessions.patch
- Rewrite patch:
  * Add 0302-Revert-90multipath-add-hostonly-multipath.conf-in-ca.patch
  * Remove 0001-multipath_revert_mpathconf_binary_use.patch
- Update 0403-95lunmask-Add-module-to-handle-LUN-masking.patch
  to match upstream kernel submission (FATE#319786)

-------------------------------------------------------------------
Tue Apr 26 10:01:19 UTC 2016 - trenn@suse.de

- Add IFS restoring where it has been lost due to mainline merging
  (bsc#977117)
*Add 0500-Reset-IFS-variable.patch

-------------------------------------------------------------------
Mon Apr 25 12:55:06 UTC 2016 - trenn@suse.de

- Make sure to install collect binary (bsc#976466)
* Add: 0188-95dasd_rules-Install-collect-udev-helper-binary.patch

-------------------------------------------------------------------
Wed Apr 20 10:15:34 UTC 2016 - trenn@suse.de

- Remove version from requires on subpackage
- Add a split provide because of the package split for SLE12 SP1 to SP2 upgrade

-------------------------------------------------------------------
Tue Apr 12 14:05:55 UTC 2016 - trenn@suse.de

- Forward port of latest SLES patches (fate#320499)
Add:
  * 0001-multipath_revert_mpathconf_binary_use.patch (fate#320499)
  * 0170-iscsi-skip-ibft-invalid-dhcp.patch (bsc#953361)
  * 0160-s390-update_active_devices_initrd.patch (bsc#939101)
  * 0161-95zfcp_rules-simplified-rd.zfcp-commandline-for-NPIV.patch (bsc#964456)
  * 0190-replace-iscsistart-with-systemd-service-files.patch (fate#319024)
  * 0191-static_network_setup_return_zero.patch (bsc#919179)
  * 0192-iscsi_set_boot_protocol_from_ifcfg.patch (bsc#919179)
  * 0193-95iscsi-Set-number-of-login-retries.patch (bsc#951003)
  * 0196-ibft-wait-for-session-on-all-paths.patch (bsc#951003)
  * 0403-95lunmask-Add-module-to-handle-LUN-masking.patch (FATE#319786)

Added, but still commented in spec file (still needs adjusting):
- Fixup booting from qla4xxx (bsc#951003)
  * 0194-95iscsi-Do-not-require-network-for-qla4xxx-flash-ses.patch
  * 0195-95iscsi-set-rd.iscsi.firmware-for-qla4xxx-sessions.patch

-------------------------------------------------------------------
Wed Mar 30 22:27:06 UTC 2016 - dmueller@suse.com

- dracut-installkernel: Fix for aarch64 (bsc#947670)

-------------------------------------------------------------------
Thu Mar 24 16:28:01 UTC 2016 - trenn@suse.de

- Move dist config file to /usr/lib/dracut/dracut.conf.d (bsc#972143)
- Remove stale, unused patch file:
0181-no_systemd_cryptsetup.patch
- Still create a debug config example in /etc/dracut.conf.d

-------------------------------------------------------------------
Fri Feb 12 11:34:33 UTC 2016 - fvogt@suse.com

- Add 0211-fix_multipath_check_hostonly.patch:
    - Fix warning about multipath

-------------------------------------------------------------------
Wed Feb 10 12:00:35 UTC 2016 - fvogt@suse.com

- Modify 0300-dracut_dont_use_dpkg_defaults_on_SUSE.patch:
    - Don't try to include plymouth if plymouth-dracut pkg. not installed

-------------------------------------------------------------------
Tue Feb  9 10:37:30 UTC 2016 - fvogt@suse.com

- Add 0210-add_fcoe_uefi_check.patch:
    - Only install fcoe-uefi module if needed (boo#965477)

-------------------------------------------------------------------
Sat Feb  6 19:16:32 UTC 2016 - fvogt@suse.com

- Fix 0208-no_forced_virtnet.patch:
    - On non-QEMU systems it returned non-zero, causing dracut to fail
    - Fixed boo#965477
    - dracut.spec: Remove 90qemu-net entirely instead of disabling
    - running_in_qemu was broken (reading output of >/dev/null)

-------------------------------------------------------------------
Mon Feb  1 09:38:46 UTC 2016 - fvogt@suse.com

- Fix 0158-Add-SUSE-kernel-module-dependencies-in-etc-modprobe.patch:
    - Patch did not have any effect whatsoever
    - Fixes bsc#869496
    - Rename from 0158-Add-SUSE-kernel-module-dependencies-in-etc-modprobe..patch

-------------------------------------------------------------------
Thu Jan 28 10:18:18 UTC 2016 - pwieczorkiewicz@suse.com

- Add 0169-network_set_mtu_macaddr_for_dhcp.patch:
    - Set MTU and LLADDR for DHCP if specified (boo#959803)

-------------------------------------------------------------------
Wed Jan 27 09:19:18 UTC 2016 - fvogt@suse.com

- Modify 0017-45ifcfg-use-distro-specific-scripts.patch:
    - Also revert upstream commit f34e1d6b to not forcibly
     include network and ifcfg modules (bsc#960669)
- Refresh:
    - 0094-Implement-shortcut-ip-ifname-static-for-static-confi.patch
    - 0132-40network-fixup-static-network-configuration.patch
    - 0142-40network-Don-t-report-error-for-etc-sysconfig-netwo.patch
    - 0402-driver-fail-summary.patch

-------------------------------------------------------------------
Wed Jan 27 07:47:55 UTC 2016 - fvogt@suse.com

- Add 0209-fix_modules_load_d_hostonly.patch:
    - Fix modules-load.d with hostonly (boo#962224)

-------------------------------------------------------------------
Tue Jan 26 11:08:04 UTC 2016 - fvogt@suse.com

- Add 0208-no_forced_virtnet.patch:
    Don't include qemu-net modules without reason.
    Fix for bsc#960669

-------------------------------------------------------------------
Fri Jan 22 13:18:33 UTC 2016 - fvogt@suse.com

- Refresh and merge:
    0133-Allow-multiple-configurations-per-network-interface-.patch
    0145-40network-handle-ip-ifname-static-correctly.patch
    0162-network-Request-DHCP-lease-instead-of-getting-applyi.patch
- Delete 0134-Remove-bootdev-warning-bnc-881112.patch:
    - ip=ibft got deprecated, so workaround not necessary

-------------------------------------------------------------------
Thu Jan 21 11:33:47 UTC 2016 - fvogt@suse.com

- Add 0207-handle_module_aliases.patch:
    Handle module aliases correctly to not generate unbootable
    initrds with different kernel versions. Fix for boo#962694

-------------------------------------------------------------------
Thu Nov 26 10:22:11 UTC 2015 - fvogt@suse.com

- Don't require bind-utils, it conflicts with
    minimal-base-conflicts

-------------------------------------------------------------------
Thu Nov 26 08:56:50 UTC 2015 - fvogt@suse.com

- Add warning about pkgconfig file to rpmlintrc's ignore list
- Fix spec file:
    - Add dracut-catimages manpage to dracut-tools
    - Fix summary of dracut-tools subpackage

-------------------------------------------------------------------
Thu Nov 26 08:48:13 UTC 2015 - fvogt@suse.com

- Remove 0400-use_fstab_systemd.patch
- Move dracut-catimages, /boot/dracut and /var/lib/dracut into
    dracut-tools subpackage
- Cleanup spec file

-------------------------------------------------------------------
Thu Nov 26 07:51:48 UTC 2015 - fvogt@suse.com

- Refresh patches with line offsets:
     0017-45ifcfg-use-distro-specific-scripts.patch
     0048-40network-Only-enable-network-interfaces-if-explicit.patch
     0088-91zipl-Add-new-module-to-update-s390x-configuration.patch
     0121-Adjust-initramfs-kernel.img-to-SUSE-default-initrd-k.patch
     0150-Find-kernel-modules-in-extra-and-weak-updates-path-a.patch
     0157-Add-boot-zipl-to-host-devs-if-it-is-a-mount-point.patch
     0182-fix-include-parsing.patch
     0183-fix_add_drivers_hang.patch
     0203-no-fail-builtin-module.patc

-------------------------------------------------------------------
Wed Nov 25 15:55:01 UTC 2015 - fvogt@suse.com

- Update to dracut-044
- Patches upstream, removed here:
     0119-Reset-IFS-variable.patch
     0120-mkinitrd-suse.sh-Bail-out-with-exit-1-if-initrd-cann.patch
     0122-Get_kernel_version_from_gz_file_for_arm.patch
     0165-Order-root-fsck-after-pre-mount.patch
     0184-fix_lvm_wc_warning.patch
     0185-dracut.sh-remove-_EARLY-from-CONFIG_MICROCODE_-check.patch
     0401-mount_option_mountpoint.patch

- Updated/Refreshed patches:
     0015-40network-replace-dhclient-with-wickedd-dhcp-supplic.patch
     0019-40network-Fix-race-condition-when-wait-for-networks.patch
     0056-81cio_ignore-handle-cio_ignore-commandline.patch
     0058-dracut-add-warning-when-including-unsupported-module.patch
     0066-40network-always-start-netroot-in-ifup.sh.patch
     0094-Implement-shortcut-ip-ifname-static-for-static-confi.patch
     0124-40network-Update-iBFT-scanning-code-to-handle-IPv6.patch
     0125-40network-separate-mask-and-prefix.patch
     0131-40network-handle-prefixed-IP-addresses-correctly.patch
     0132-40network-fixup-static-network-configuration.patch
     0144-90crypt-Fixed-crypttab_contains-to-also-work-with-de.patch
     0150-Find-kernel-modules-in-extra-and-weak-updates-path-a.patch
     0158-Add-SUSE-kernel-module-dependencies-in-etc-modprobe..patch
     0159-network-Try-to-load-xennet.patch
     0202-dracut_dmraid_use_udev.patch
     0203-no-fail-builtin-module.patch
     0402-driver-fail-summary.patch

-------------------------------------------------------------------
Wed Nov 25 08:06:02 UTC 2015 - fvogt@suse.com

- Fix 0202-dracut_dmraid_use_udev.patch:
    - Statement was missing a program to execute

-------------------------------------------------------------------
Tue Nov 24 13:38:45 UTC 2015 - fvogt@suse.com

- Add 0206-nfs_dns_alias.patch to fix boo#955592:
    - Fix dracut run on nfs root where NFS host is a DNS ALIAS
- Require bind-utils. host is used in some lines

-------------------------------------------------------------------
Thu Nov 19 09:18:31 CET 2015 - tiwai@suse.de

- Fix the wrong kernel config check for microcode with 4.4 kernel
  (boo#955712):
  0185-dracut.sh-remove-_EARLY-from-CONFIG_MICROCODE_-check.patch

-------------------------------------------------------------------
Tue Nov 17 14:08:10 UTC 2015 - fvogt@suse.com

- Disable 0400-use_fstab_systemd.patch
    - Fully implementing this would take ages
    - Fix boo#948771

-------------------------------------------------------------------
Tue Nov 17 13:14:26 UTC 2015 - fvogt@suse.com

- Add numbers to the filename of all patches:
fips_add_aesni-intel.patch -> 0138-fips_add_aesni-intel.patch
dracut_fix_multipath_without_config.patch -> 0200-dracut_fix_multipath_without_config.patch
fix_nfs_with_ip_instead_of_hostname.patch -> 0201-fix_nfs_with_ip_instead_of_hostname.patch
dracut_dmraid_use_udev.patch -> 0202-dracut_dmraid_use_udev.patch
dracut_dont_use_dpkg_defaults_on_SUSE.patch -> 0300-dracut_dont_use_dpkg_defaults_on_SUSE.patch

-------------------------------------------------------------------
Mon Nov 16 10:09:03 UTC 2015 - fvogt@suse.com

- Update description in dracut.spec

-------------------------------------------------------------------
Thu Nov 12 08:52:54 UTC 2015 - fvogt@suse.com

- Add 0301-include_sysconfig_language.patch:
    - Include /etc/sysconfig/language instead of forcibly generating
        /etc/locale.conf
    - Workaround and partial fix for boo#927250

-------------------------------------------------------------------
Tue Nov 10 11:26:51 UTC 2015 - fvogt@suse.com

- Add 0205-mdraid_ignore_hostonly.patch:
    - Always install mdraid modules (boo#935993)

-------------------------------------------------------------------
Tue Nov 10 10:35:05 UTC 2015 - fvogt@suse.com

- Modify 0402-driver-fail-summary.patch
    - Add notice (bsc#952491)
    - Use mktemp instead of hardcoded filenames (bnc#935338)
- Modify 0144-90crypt-Fixed-crypttab_contains-to-also-work-with-de.patch
    - Use mktemp instead of hardcoded filenames (bnc#935338)

-------------------------------------------------------------------
Wed Nov  4 16:45:37 UTC 2015 - fvogt@suse.com

- Add dracut-rpmlintrc
- Fix permissions of various scripts, as patch does not
    create executable files

-------------------------------------------------------------------
Wed Nov  4 16:07:07 UTC 2015 - fvogt@suse.com

- Fix format of patch disablement

-------------------------------------------------------------------
Wed Nov  4 16:05:31 UTC 2015 - fvogt@suse.com

- Add 0204-mkinitrd-fix-monster.patch:
    - Implement functionality of -A option
    - Without this patch, -A sets host_only=0,
      but host_only wasn't used
    - Translates into --no-host-only now
- References boo#935993

-------------------------------------------------------------------
Tue Nov  3 16:12:44 UTC 2015 - fvogt@suse.com

- Add 0402-driver-fail-summary.patch:
    - Port 0169-Enabled-Warning-for-failed-kernel-modules-per-defaul.patch:
      Subject: Enable warning for failed kernel moduiles

Enabled Warning for failed kernel modules per default
      and added summary of those to the end of dracut output

References: bnc#886839
    - Disable inline warnings in favour of summary

-------------------------------------------------------------------
Tue Nov  3 15:35:20 UTC 2015 - fvogt@suse.com

- Add 0203-no-fail-builtin-module.patch:
    Don't let inst1mod fail if module is built-in
    - Fixes bsc#935563

-------------------------------------------------------------------
Wed Oct 14 12:51:54 UTC 2015 - trenn@suse.de

- Always install dm-snaphost module if lvm dracut module is needed,
  even if dm-snampshot is not loaded on the host yet (bsc#947518)
A 0128-90lvm-Install-dm-snapshot-module.patch

-------------------------------------------------------------------
Tue Oct  6 10:28:35 UTC 2015 - fvogt@suse.com

- Add patch 0184-fix_lvm_wc_warning.patch:
   - Upstream commit 08eca6 to get rid of missing wc warning

-------------------------------------------------------------------
Thu Oct  1 12:44:28 UTC 2015 - fvogt@suse.com

- Fix 0181-no_systemd_cryptsetup.patch:
   - Password input without plymouth didn't work

-------------------------------------------------------------------
Thu Oct  1 10:02:21 UTC 2015 - dimstar@opensuse.org

- Disable 0181-no_systemd_cryptsetup.patch: it breaks existing
  installations of encrypted / on LVM.

-------------------------------------------------------------------
Wed Sep 23 11:26:05 UTC 2015 - fvogt@suse.com

- Fix 0182-fix-include-parsing.patch
- Didn't parse arguments with spaces correctly

-------------------------------------------------------------------
Wed Sep 23 10:16:47 UTC 2015 - fvogt@suse.com

- Add patch 0183-fix_add_drivers_hang.patch:
   - Fix possible hang in dracut
     caused by add_drivers+=" " in dracut.conf (bsc#923116)

-------------------------------------------------------------------
Mon Sep 21 13:18:43 UTC 2015 - fvogt@suse.com

- Add patch 0182-fix-include-parsing.patch:
   - Fix parsing of "-i" and "--include"
- Fixes boo#908452

-------------------------------------------------------------------
Mon Sep 21 10:45:14 UTC 2015 - fvogt@suse.com

- Add patch 0181-no_systemd_cryptsetup.patch:
  - rd.luks.key is not implemented (properly) if systemd is enabled,
    so ignore systemd in 90crypt
- Fixes boo#915849

-------------------------------------------------------------------
Wed Sep 16 12:12:12 UTC 2015 - fvogt@suse.com

- Fix systemd-vconsole-error properly (bsc#943312 and bsc#932981)
  Rewrite 0180-dracut-add-trivial-vconsole-fontmap.patch
  as 0180-i18n_add_correct_fontmaps.patch

-------------------------------------------------------------------
Mon Sep 14 11:33:51 UTC 2015 - thomas.blume@suse.com

- fix systemd-vconsole-error in initrd (bsc#943312)
  Add 0180-dracut-add-trivial-vconsole-fontmap.patch

-------------------------------------------------------------------
Fri Sep 11 11:06:46 UTC 2015 - fvogt@suse.com

- Add 0401-mount_option_mountpoint.patch:
    Make it possible to use a mountpoint as --mount parameter

-------------------------------------------------------------------
Fri Sep 11 10:56:42 UTC 2015 - fvogt@suse.com

- Add experimental 0400-use_fstab_systemd.patch:
    Add entry for /sysroot in /etc/fstab instead of relying
    on root= and rootflags=

-------------------------------------------------------------------
Sun Aug 23 19:14:15 UTC 2015 - seife+obs@b1-systems.com

- fix plymouth installation if dpkg package is installed
  - add dracut_dont_use_dpkg_defaults_on_SUSE.patch

-------------------------------------------------------------------
Mon Aug 17 15:41:14 UTC 2015 - trenn@suse.de

- Do not recommend, but require binutils package. bsc#941928

-------------------------------------------------------------------
Sun Jul 26 08:16:53 UTC 2015 - jengelh@inai.de

- get_kernel_version is required for /sbin/mkinitrd

-------------------------------------------------------------------
Thu Jul  2 12:59:27 UTC 2015 - trenn@suse.de

- Update to version 043
  Minor change: add missing dmsquash-generator

-------------------------------------------------------------------
Wed Jun 24 16:06:36 UTC 2015 - trenn@suse.de

- Fix dmraid issue bnc#905746
A    dracut_dmraid_use_udev.patch
- Taken over from SLE12
A    fips_add_aesni-intel.patch
- Do not touch /run vs /var/run bnc#922676
D    0106-dracut-Enable-converting-of-directory-var-run-var-lo.patch
- Update dracut to version 042
Remove these already included or unneeded patches:
D    dracut_v041_to_HEAD.patch
D    0011-Correct-paths-for-openSUSE.patch
D    0068-95fcoe-uefi-Test-for-EFI-firmware.patch
D    0170-enable-logitech-hidpp.patch
- Fix nfs mount if IPv4 is used in fstab instead of hostname
A fix_nfs_with_ip_instead_of_hostname.patch

Adjust/refresh:
M    0015-40network-replace-dhclient-with-wickedd-dhcp-supplic.patch
M    0016-Add-new-s390x-specific-rule-files.patch
M    0017-45ifcfg-use-distro-specific-scripts.patch
M    0019-40network-Fix-race-condition-when-wait-for-networks.patch
M    0020-00warpclock-Set-correct-timezone.patch
M    0021-95dcssblk-Add-new-module-for-DCSS-block-devices.patch
M    0048-40network-Only-enable-network-interfaces-if-explicit.patch
M    0053-01fips-fixup-loading-issues.patch
M    0056-81cio_ignore-handle-cio_ignore-commandline.patch
M    0057-01fips-Include-some-more-hmacs.patch
M    0058-dracut-add-warning-when-including-unsupported-module.patch
M    0059-99suse-Add-SUSE-specific-initrd-parsing.patch
M    0060-45ifcfg-Add-SUSE-specific-write-ifcfg-file.patch
M    0061-45ifcfg-Fixup-error-message-in-write-ifcfg-suse.patch
M    0066-40network-always-start-netroot-in-ifup.sh.patch
M    0075-95dasd_rules-enable-parsing-of-rd.dasd-commandline-p.patch
M    0076-Correctly-set-cio_ignore-for-dynamic-s390-rules.patch
M    0079-95dasd_rules-fixup-rd.dasd-parsing.patch
M    0080-95dasd_rules-print-out-rd.dasd-commandline.patch
M    0081-95dasd_mod-do-not-set-module-parameters-if-dasd_cio_.patch
M    0083-95zfcp_rules-Fixup-rd.zfcp-parsing.patch
M    0085-95zfcp_rules-print-out-rd.zfcp-commandline-parameter.patch
M    0086-95zfcp_rules-Auto-generate-udev-rule-for-ipl-device.patch
M    0087-95dasd_rules-Auto-generate-udev-rule-for-ipl-device.patch
M    0088-91zipl-Add-new-module-to-update-s390x-configuration.patch
M    0089-40network-create-var-lib-wicked-in-ifup.sh.patch
M    0090-dracut-caps-Remove-whole-caps-module.patch
M    0091-dracut-biosdevname-In-SUSE-biosdevname-package-is-in.patch
M    0094-Implement-shortcut-ip-ifname-static-for-static-confi.patch
M    0106-dracut-Enable-converting-of-directory-var-run-var-lo.patch
M    0107-Fixup-typo-firmare-instead-of-firmware.patch
M    0108-91zipl-Store-commandline-correctly.patch
M    0109-95dasd_rules-Store-all-devices-in-commandline.patch
M    0110-95zfcp_rules-Store-all-devices-in-commandline.patch
M    0113-91zipl-Install-script-as-executable.patch
M    0114-91zipl-Translate-ext2-3-into-ext4.patch
M    0116-Mark-scripts-as-executable.patch
M    0117-95dasd_rules-Enable-the-device-before-checking-devic.patch
M    0118-95zfcp_rules-Enable-the-device-before-checking-devic.patch
M    0119-Reset-IFS-variable.patch
M    0120-mkinitrd-suse.sh-Bail-out-with-exit-1-if-initrd-cann.patch
M    0121-Adjust-initramfs-kernel.img-to-SUSE-default-initrd-k.patch
M    0122-Get_kernel_version_from_gz_file_for_arm.patch
M    0123-95zfcp_rules-fix-typo-in-module_setup.patch
M    0124-40network-Update-iBFT-scanning-code-to-handle-IPv6.patch
M    0125-40network-separate-mask-and-prefix.patch
M    0126-01fips-Add-drbg-module-to-force-loaded-modules.patch
M    0130-nfs-Always-add-all-kernel-modules-for-kdump.patch
M    0131-40network-handle-prefixed-IP-addresses-correctly.patch
M    0132-40network-fixup-static-network-configuration.patch
M    0137-Switch-from-Mozilla-NSS-sha256hmac-checking-to-fipsc.patch
M    0142-40network-Don-t-report-error-for-etc-sysconfig-netwo.patch
M    0144-90crypt-Fixed-crypttab_contains-to-also-work-with-de.patch
M    0150-Find-kernel-modules-in-extra-and-weak-updates-path-a.patch
M    0157-Add-boot-zipl-to-host-devs-if-it-is-a-mount-point.patch
M    0158-Add-SUSE-kernel-module-dependencies-in-etc-modprobe..patch
M    0159-network-Try-to-load-xennet.patch
M    0163-Install-etc-sysconfig-console-to-see-specific-fonts.patch
M    0164-Fix-initramfs-ver.img-vs-initrd-ver-in-dracut-initra.patch
M    0165-Order-root-fsck-after-pre-mount.patch
M    0168-remove_plymouth_logo_file.patch
M    dracut_fix_multipath_without_config.patch

-------------------------------------------------------------------
Wed May 20 11:44:59 UTC 2015 - trenn@suse.de

- Fix mkinitrd (get_kernel_version) for arm* arch by getting kernel version
  from vmlinux.*.gz file instead of [uz]Image file.
  Taken over from mkinitrd bnc#908454
*Add patch 0122-Get_kernel_version_from_gz_file_for_arm.patch
- Fix nfs ip= setup in case of IP instead of host in root= name (bsc#931307)
- Honor allow_unsupported_modules setting
  From: Borislav Petkov <bp@suse.de>
  $ make install

of a locally built kernel, you don't want dracut to do --check-supported
for supported modules when you have "allow_unsupported_modules 1" in
/etc/modprobe.d/10-unsupported-modules.conf.

Teach /sbin/installkernel to pay attention to that setting.

Use modprobe --showconfig too, which is going to be the proper way to do
it starting with 12SP1.

-------------------------------------------------------------------
Fri May  8 06:30:32 UTC 2015 - trenn@suse.de

- Add fix for multipath systems without multipathd.conf
  bsc#927719: Tumbleweed Snapshot blocked: no multipath support in 20150416\
            (likely dracut issue)
  bsc#930019: multipath is broken in dracut due to missing /etc/multipath.conf
	    file (systemd multpath.service condition)

* Added patch: dracut_fix_multipath_without_config.patch

-------------------------------------------------------------------
Tue Mar 24 15:37:48 UTC 2015 - trenn@suse.de

- Update to dracut mainline version 041.
  Half of the patches got integrated mainline.
  Some others have been merged together when it made sense some have
  been left out, but are still in the repository as they need some special
  treating and mainline discussion whether/how they get added. These are
  also not urgently needed, but are debugging patches.

I broke the rule here to mention every added/deleted/modified patch as
  every patch is touched and every 2nd  got removed (mainline integrated).

I also re-ordered the patches in the PatchXY: area for easier merging them
  and get them discussed and posted mainline easier, topic by topic.

- Patches merged in the git tracking repository:
  0065-95iscsi-Fixup-bnx2i-offload-booting.patch
  0028-95udev-rules-Include-correct-sg3_utils-rules.patch
  0135-lvm-Fix-12819a579900b9691e2-check-for-existance-of-6.patch
  0100-Add-btrfs-rescue-utilities.patch
  0067-95fcoe-check-always-returns-255.patch
  0138-warpclock-Do-not-use-warpclock-module-on-S390-x-hwcl.patch
  0077-90multipath-add-missing-11-dm-mpath.rules-file.patch
  0042-Enhance-suse.conf-example-with-SUSE-specific-setting.patch
  0161-Fix-error-message-when-there-are-no-internal-kernel-.patch
  0111-90mdraid-Remove-line-for-offroot-detection.patch
  0129-Revert-commit-6ecab258710d158a7a6-and-only-do-not-wa.patch
  0041-mkinitd-suse-remove-hostonly-and-hostonly-cmdline.patch
  0030-95iscsi-Autodetect-iSCSI-firmware.patch
  0052-99base-Add-chown-binary.patch
  0105-95iscsi-parse-output-from-iscsiadm-correctly.patch
  0101-Print-stored-dracut-commandline-during-initramfs-bui.patch
  0096-dracut-Fix-error-local-can-only-be-used-in-a-functio.patch
  0043-40network-always-add-network-module.patch
  0035-Introduce-force-drivers-parameter-and-force_drivers-.patch
  0136-Revert-95udev-rules-add-persistent-network-rule.patch
  0143-iscsi-Fix-up-ipv6-in-brackets-iterate-over-all-possi.patch
  0167-do-not-symlink-var-log-to-run-log.patch
  0024-Fixup-mdraid-setup.patch
  0032-mkinitrd-suse.sh-Use-hostonly-and-hostonly-cmdline-c.patch
  0022-95udev-rules-add-persistent-network-rule.patch
  0166-load-xhci-pci.patch
  0047-95resume-skip-module-for-s390-x.patch
  0014-Update-dracut-manpage-for-GRUB-Legacy-and-GRUB2.patch
  0055-95fcoe-Only-install-fcoe-module-if-required.patch
  0078-Restore-original-IFS-value.patch
  0046-dracut-Do-not-wait-for-swap-device.patch
  0074-More-empty-cmdline-fixes.patch
  0112-99base-warn-on-invalid-command-for-initqueue.patch
  0034-dracut-Do-not-stop-installing-drivers-if-one-fails.patch
  0139-dracut.sh-check-for-logfile-logfile-option-and-creat.patch
  0127-99base-Increase-initqueue-timeout-in-non-systemd-cas.patch
  0104-Generate-fallback-mount-unit-for-root-filesystem.patch
  0154-resume-Also-allow-this-module-on-S390-again-s2disk-c.patch
  0149-dracut.sh-Fix-fstab-parsing-again.patch
  0027-90multipath-install-dracut-specific-service-file.patch
  0084-95rootfs-block-Correctly-terminate-commandline-param.patch
  dracut_v37_to_HEAD.patch
  0128-90lvm-Install-dm-snapshot-module.patch
  0063-90multipath-Install-libgcc_s-library.patch
  0062-95iscsi-Install-libgcc_s-library.patch
  0146-dracut.sh-corrected-logfile-check.patch
  0071-Fix-non-export-of-journal-dev-boot-options.patch
  0044-Add-find-to-debug-binaries.patch
  0039-Remove-force-parameter-from-mkinitrd.patch
  0026-90multipath-add-67-kpartx-compat.rules.patch
  0099-90multipath-Load-device_handler-modules-early-during.patch
  0029-90multipath-install-correct-multipath-rules.patch
  0031-90multipath-Fixup-service-file-for-booting.patch
  0036-95fcoe-Store-current-configuration-in-dracut-cmdline.patch
  A patch (dracut_v041_to_HEAD.patch) is being added without being properly referenced from the changelog.
  0151-Go-back-to-xz-again-pixz-may-use-too-much-memory-whi.patch
  0069-81cio_ignore-skip-module-if-cio_ignore-is-not-active.patch
  0070-81cio_ignore-rewrite-module.patch
  0033-95iscsi-Set-correct-iscsi_started-value-for-iSCSI-fi.patch
  0098-Do-not-call-lvm-for-non-LVM-device-mapper-devices.patch
  0023-systemd-always-tries-to-load-autofs4.patch
  0051-mkinitrd-suse-add-update-bootloader-message.patch
  0013-mkinitrd-suse-do-not-update-bootloader-if-no-kernel-.patch
  0115-Handle-module-alias-properly.patch
  0054-95iscsi-update-commandline-printing.patch
  0148-dracut.sh-Fix-LABEL-and-other-fstab-syntax.patch
  0122-btrfs-btrfs-dump-super-and-btrfs-select-super-do-not.patch
  0045-40network-add-missing-_arch-variable-declaration.patch
  0050-95iscsi-strip-one-set-of-quotes-when-calling-initque.patch
  0152-Add-a-comment-to-easily-add-debug-modules-also-add-v.patch
  0147-dracut.sh-Fix-UUID-fstab-parsing-in-case-mount-optio.patch
  0038-95fcoe-start-lldpad-separately.patch
  0082-00warpclock-check-for-sbin-hwclock.patch
  0155-iscsi-iscsi.initiator-and-others-can-and-must-only-s.patch
  0037-95fcoe-update-fcoe-interface-check.patch
  0141-iscsi-Avoid-bad-ip-route-call-on-empty-address.patch
  0049-95iscsi-Use-ip-ibft-for-ibft-autoconfiguration.patch
  0153-Only-add-network-module-on-request-and-on-dependenci.patch
  0097-Implement-rd.timeout-to-modify-the-device-timeout.patch
  0169-fix-systemd-vconsole.patch
  0073-Don-t-create-lots-of-empty-cmdline-files-for-hostonl.patch
  0103-Fixup-missing-separators-in-rootfs-block-cmdline.patch
  0064-90kernel-modules-install-scsi_dh_alua.patch
  0012-Check-for-plymouth-lib-directories.patch
  0092-dracut-nbd-Only-complain-of-missing-binary-in-hoston.patch
  0160-nfs-Add-ip-.-and-root-nfs.-parameters-to-internal-dr.patch
  0093-95iscsi-generate-commandline-for-software-iscsi.patch
  0040-95fcoe-skip-VLAN-devices-in-fcoe-up.patch
  0156-dracut.usage.asc-Remove-distro-specific-help-from-ma.patch
  0018-mkinitrd-suse-Fix-whitespaces-when-adding-drivers.patch
  0140-dracut.sh-Avoid-duplicate-devices-in-host_devs.patch
  0095-95iscsi-use-static-configuration-for-software-iscsi.patch
  0025-95udev-rules-Add-59-scsi-sg_utils.rules.patch
  0072-Also-export-root-boot-param-for-hostonly-cmdline-cas.patch
  0102-Align-dev_unit_name-with-systemd-s-function.patch
  0001-kernel-modules-Fix-storage-module-selection-for-sdhc.patch

- Added dracut_v041_to_HEAD.patch: new patch from v041 against our git

-------------------------------------------------------------------
Fri Feb 27 18:37:56 UTC 2015 - sfalken@opensuse.org

- Add patch to load logitech-hidpp module in default initrd, fixes
  issues with not being able to enter LUKS password with logitech
  wireless keyboards (boo#918938)
  + Added: 0170-enable-logitech-hidpp.patch

-------------------------------------------------------------------
Mon Feb 23 16:13:16 UTC 2015 - meissner@suse.com

- dracut-fix-systemd-vconsole.patch: patch from upstream to start
  the vconsole for new systemd.
  + Added 0169-fix-systemd-vconsole.patch

-------------------------------------------------------------------
Tue Feb 17 16:23:04 UTC 2015 - sfalken@opensuse.org

- Add patch to remove PLYMOUTH_LOGO_FILE from
  modules.d/50plymouth/plymouth-populate-initrd.sh (bnc#910952)
  + 0168-remove_plymouth_logo_file.patch

-------------------------------------------------------------------
Mon Feb  9 14:28:56 UTC 2015 - dimstar@opensuse.org

- Do no longer package 02caps: patch 90 takes care of removing it.

-------------------------------------------------------------------
Thu Feb  5 09:37:42 UTC 2015 - meissner@suse.com

- regenerate the initrds on updating this package (or the -fips
  subpackage)

-------------------------------------------------------------------
Sun Feb  1 10:11:29 UTC 2015 - tchvatal@suse.com

- Apply patch for systemd-journald SIGTERMing on boot bnc#915575
  * 0167-do-not-symlink-var-log-to-run-log.patch

-------------------------------------------------------------------
Sat Jan  3 04:53:20 UTC 2015 - bwiedemann@suse.com

- add 0166-load-xhci-pci.patch
  load xhci-pci on Linux-3.18+ to allow USB-keyboard to give LUKS PW
  (bnc#911319)

-------------------------------------------------------------------
Wed Dec 17 09:15:56 UTC 2014 - schwab@suse.de

- 0001-kernel-modules-Fix-storage-module-selection-for-sdhc.patch: fix
  storage module selection for sdhci/mmc/ahci

-------------------------------------------------------------------
Sat Nov 22 06:26:37 UTC 2014 - arvidjaar@gmail.com

- add 0165-Order-root-fsck-after-pre-mount.patch
  ensure root fsck runs after dracut-pre-mount.service which calls
  resume (bnc#906592)

-------------------------------------------------------------------
Wed Oct 15 16:07:47 UTC 2014 - trenn@suse.de

- dracut-initrd-restore.patch: dracut-shutdown.service invokes 
  dracut-initramfs-restore script which will never work in 
  openSUSE because initrd images are named initrd not initramfs.
  Patch is from: Cristian Rodríguez <crrodriguez@opensuse.org>
* Add 0164-Fix-initramfs-ver.img-vs-initrd-ver-in-dracut-initra.patch

-------------------------------------------------------------------
Wed Oct  8 17:29:35 UTC 2014 - spargaonkar@suse.com

- Overwrite/generate modules.dep file using depmod since the file
  modules.dep is not portable across releases (bsc#874621).

-------------------------------------------------------------------
Thu Oct  2 14:33:20 UTC 2014 - trenn@suse.de

- Fix install-kernel with xen for self build kernels to show up in grub2
  properly (bsc#897901)
* Modify dracut-installkernel (source file)
- Fix foreign fonts in plymouth and console (bnc#897972)
* Add 0163-Install-etc-sysconfig-console-to-see-specific-fonts.patch

-------------------------------------------------------------------
Wed Sep 24 16:21:11 UTC 2014 - trenn@suse.de

- Add ip= and root=nfs.. to dracut internal cmdline to make nfsroot working
  (bnc#896464)
* Add 0160-nfs-Add-ip-.-and-root-nfs.-parameters-to-internal-dr.patch
- Fix error message in case there is no internal dracut cmdline added
  Simple fix
* Add 0161-Fix-error-message-when-there-are-no-internal-kernel-.patch
- Request DHCP lease instead of getting/applying the offer
  No bug number, but Pawel rated this high prio. This should hit SLE12 still.
* Add 0162-network-Request-DHCP-lease-instead-of-getting-applyi.patch

-------------------------------------------------------------------
Mon Sep 22 13:33:11 UTC 2014 - trenn@suse.de

- Try to load xennet driver in network module (if loaded).
  bnc#896464, bnc#896259
* Add 0159-network-Try-to-load-xennet.patch

-------------------------------------------------------------------
Thu Sep 11 13:36:03 UTC 2014 - trenn@suse.de

- dracut.usage.asc: Remove distro specific help from manpage (bnc#895363)
*Add 0156-dracut.usage.asc-Remove-distro-specific-help-from-ma.patch
- Add /boot/zipl to host devs if it is a mount point (bnc#892187)
*Add 0157-Add-boot-zipl-to-host-devs-if-it-is-a-mount-point.patch
- Add SUSE kernel module dependencies (in /etc/modprobe.d/*) (bnc#895331)
*Add 0158-Add-SUSE-kernel-module-dependencies-in-etc-modprobe..patch
-------------------------------------------------------------------
Thu Sep  4 12:59:27 UTC 2014 - trenn@suse.de

- Network module may take quite a lot of initrd space. Do not add it
  unconditionally (bnc#892851)
* Add 0153-Only-add-network-module-on-request-and-on-dependenci.patch
- S390x can do s2disk, allow resume module there
  (bnc#889795)
* Add 0154-resume-Also-allow-this-module-on-S390-again-s2disk-c.patch
- Harden iscsi parameter checking. No bug report, but this problem
  was found during multipath testing and happens with 2 or more
  iscsi devices.
* Add 0155-iscsi-iscsi.initiator-and-others-can-and-must-only-s.patch

-------------------------------------------------------------------
Fri Aug 29 14:27:49 UTC 2014 - trenn@suse.de

- Do not blindly try to touch the logfile (bnc#893219)
* Add 0146-dracut.sh-corrected-logfile-check.patch
- Only fix UUID= fstab parsing
* Add 0147-dracut.sh-Fix-UUID-fstab-parsing-in-case-mount-optio.patch
- Also fix other parsing syntax in fstab like LABEL=
* Add 0148-dracut.sh-Fix-LABEL-and-other-fstab-syntax.patch
- Fix up some bugs from previous commit
* Add 0149-dracut.sh-Fix-fstab-parsing-again.patch
- bnc#893615
* Add 0150-Find-kernel-modules-in-extra-and-weak-updates-path-a.patch
- pixz does need too much memory, go back to xz in a conservative way
  (bnc#893981)
* Add 0151-Go-back-to-xz-again-pixz-may-use-too-much-memory-whi.patch
- Add some default tools to initrd when debug module is included and
  already provided an commented example line how to easily enable it.
  No functional change by default.
* Add 0152-Add-a-comment-to-easily-add-debug-modules-also-add-v.patch

-------------------------------------------------------------------
Thu Aug 21 12:38:02 UTC 2014 - trenn@suse.de

- dracut.sh: check for logfile (--logfile option) and create it if necessary
  Add 0139-dracut.sh-check-for-logfile-logfile-option-and-creat.patch
- Avoid duplicate names in host_devs
  Add 0140-dracut.sh-Avoid-duplicate-devices-in-host_devs.patch
- iscsi: Avoid bad ip route call on empty address
  Add 0141-iscsi-Avoid-bad-ip-route-call-on-empty-address.patch
- 40network: Don't report error for .../ifroute-* during module setup
  Add 0142-40network-Don-t-report-error-for-etc-sysconfig-netwo.patch
- iscsi: Fix up ipv6 in brackets , iterate over all needed iscsi mounts
  Add 0143-iscsi-Fix-up-ipv6-in-brackets-iterate-over-all-possi.patch
- 90crypt: Fixed crypttab_contains() to also work with device in /etc/crypttab
  Add 0144-90crypt-Fixed-crypttab_contains-to-also-work-with-de.patch
- 40network: handle 'ip=ifname:static' correctly (bnc#892801)
  Add 0145-40network-handle-ip-ifname-static-correctly.patch

-------------------------------------------------------------------
Thu Aug 14 15:07:16 UTC 2014 - trenn@suse.de

- Allow multiple configurations per network interface (bnc#887906)
  Add 0133-Allow-multiple-configurations-per-network-interface-.patch
- Remove bootdev warning (bnc#881112)
  Add 0134-Remove-bootdev-warning-bnc-881112.patch
- check for existance of 69-dm-lvm-metad.rules in modules_setup.sh, lvm module
  (bnc#891791)
  Add 0135-lvm-Fix-12819a579900b9691e2-check-for-existance-of-6.patch
- Moved persistent network rule revert to another file (was not in github):
  Delete: 0133-Remove-70-persistent-net.rules.patch
  Add:    0136-Revert-95udev-rules-add-persistent-network-rule.patch
- dracut-use-fipscheck-openssl.patch: Switch from Mozilla NSS sha256hmac
  checking to fipscheck as recommended
  Add: 0137-Switch-from-Mozilla-NSS-sha256hmac-checking-to-fipsc.patch
- warpclock: Do not use warpclock module on S390(x), hwclock does not exist
  there (bnc#884513)
  Add 0138-warpclock-Do-not-use-warpclock-module-on-S390-x-hwcl.patch

-------------------------------------------------------------------
Tue Aug  5 15:08:57 UTC 2014 - trenn@suse.de

- 99base: Increase initqueue timeout in non systemd case (bnc#887402)
  * Add: 0127-99base-Increase-initqueue-timeout-in-non-systemd-cas.patch
- 90lvm: Install dm-snapshot module (bnc#888530)
  * Add: 0128-90lvm-Install-dm-snapshot-module.patch
- Revert commit 6ecab258710d158a7a6 and only do not wait for swap via
 parameter (bnc#882812)
  * Add: 0129-Revert-commit-6ecab258710d158a7a6-and-only-do-not-wa.patch
- nfs: Always add all kernel modules for kdump (bnc#887906)
  * Add: 0130-nfs-Always-add-all-kernel-modules-for-kdump.patch
- 40network: handle prefixed IP addresses correctly (bnc#880108)
  * Add: 0131-40network-handle-prefixed-IP-addresses-correctly.patch
- 40network: fixup static network configuration
  * Add: 0132-40network-fixup-static-network-configuration.patch
- Remove 70-persistent-net.rules
  * Add: 0133-Remove-70-persistent-net.rules.patch

-------------------------------------------------------------------
Mon Jul 21 10:47:50 CEST 2014 - hare@suse.de

- mkinitrd-suse.sh: Bail out with exit 1 if initrd cannot be generated
  (bnc#886630)
  * Add: 0120-mkinitrd-suse.sh-Bail-out-with-exit-1-if-initrd-cann.patch
- Adjust initramfs-$kernel.img to SUSE default: initrd-$kernel
  (bnc#882306)
  * Add: 0121-Adjust-initramfs-kernel.img-to-SUSE-default-initrd-k.patch
- btrfs: btrfs-dump-super and btrfs-select-super do not exist
  (bnc#886883)
  * Add: 0122-btrfs-btrfs-dump-super-and-btrfs-select-super-do-not.patch
- 95zfcp_rules: fix typo in module_setup (bnc#887582)
  * Add: 0123-95zfcp_rules-fix-typo-in-module_setup.patch
- 40network: Update iBFT scanning code to handle IPv6 (bnc#887542)
  * Add: 0124-40network-Update-iBFT-scanning-code-to-handle-IPv6.patch
- 40network: separate 'mask' and 'prefix' (bnc#887542)
  * Add: 0125-40network-separate-mask-and-prefix.patch
- 01fips: Add drbg module to force loaded modules (bnc#875855)
  * Add: 0126-01fips-Add-drbg-module-to-force-loaded-modules.patch

-------------------------------------------------------------------
Mon Jul 14 16:20:46 UTC 2014 - trenn@suse.de

- Fixup executable bits of newly patched files manually in spec file
  bnc#887117

-------------------------------------------------------------------
Mon Jul 14 10:35:51 CEST 2014 - hare@suse.de

- Mark all scripts as executable (bnc#887010)
  * Remove: 0116-81cio_ignore-Mark-scripts-as-executable
  * Add: 0116-Mark-scripts-as-executable.patch
- 95dasd_rules: Enable device before checking type
  * Add: 0117-95dasd_rules-Enable-the-device-before-checking-devic.patch
- 95zfcp_rules: Enable device before checking type
  * Add: 0118-95zfcp_rules-Enable-the-device-before-checking-devic.patch
- Reset IFS variable
  * Add: 0119-Reset-IFS-variable.patch

-------------------------------------------------------------------
Sat Jul 12 15:01:04 CEST 2014 - hare@suse.de

- Handle module alias properly (bnc#886839)
  * Add: 0115-Handle-module-alias-properly.patch
- 81cio_ignore: Mark scripts as executable (bnc#887010)
  * Add: 0116-81cio_ignore-Mark-scripts-as-executable.patch

-------------------------------------------------------------------
Fri Jul 11 13:01:08 CEST 2014 - hare@suse.de

- 91zipl: Translate 'ext2' into 'ext4' module
  * Add: 0114-91zipl-Translate-ext2-3-into-ext4.patch

-------------------------------------------------------------------
Thu Jul 10 13:30:51 CEST 2014 - hare@suse.de

- Enable converting of directory /var/run /var/lock to symlinks
  (bnc#877680)
  * Add: 0106-dracut-Enable-converting-of-directory-var-run-var-lo.patch
- Fixup typo 'firmare' instead of 'firmware'
  * Add: 0107-Fixup-typo-firmare-instead-of-firmware.patch
- 91zipl: Store commandline correctly
  * Add: 0108-91zipl-Store-commandline-correctly.patch
- 95dasd_rules: Store all devices in commandline
  * 0109-95dasd_rules-Store-all-devices-in-commandline.patch
- 95zfcp_rules: Store all devices in commandline
  * Add: 0110-95zfcp_rules-Store-all-devices-in-commandline.patch
- 90mdraid: Remove line for 'offroot' detection
  * Add: 0111-90mdraid-Remove-line-for-offroot-detection.patch
- 99base: warn on invalid command for initqueue
  * Add: 0112-99base-warn-on-invalid-command-for-initqueue.patch
- 91zipl: Install script as executable
  * Add: 0113-91zipl-Install-script-as-executable.patch

-------------------------------------------------------------------
Tue Jul  8 13:21:14 CEST 2014 - hare@suse.de

- Print stored dracut commandline during initramfs build
  * Add: 0101-Print-stored-dracut-commandline-during-initramfs-bui.patch
- Align dev_unit_name() with systemd's function
  * Add: 0102-Align-dev_unit_name-with-systemd-s-function.patch
- Fixup missing separators in rootfs-block cmdline
  * Add: 0103-Fixup-missing-separators-in-rootfs-block-cmdline.patch
- Generate fallback mount unit for root filesystem (bnc#855258)
  * Add: 0104-Generate-fallback-mount-unit-for-root-filesystem.patch
- 95iscsi: parse output from iscsiadm correctly (bnc#886199)
  * Add: 0105-95iscsi-parse-output-from-iscsiadm-correctly.patch

-------------------------------------------------------------------
Thu Jul  3 18:16:11 CEST 2014 - dsterba@suse.cz

- 90btrfs: Install rescue utilities to initrd
  * Add: 0100-btrfs-add-initrd-rescue-utilities.patch

-------------------------------------------------------------------
Thu Jul  3 15:41:16 CEST 2014 - hare@suse.de

- 40network: create /var/lib/wicked in ifup.sh (bnc#885141)
  * Add: 0089-40network-create-var-lib-wicked-in-ifup.sh.patch
- dracut: caps: Remove whole caps module
  * Add: 0090-dracut-caps-Remove-whole-caps-module.patch
- dracut: biosdevname: Only install if present
  * Add: 0091-dracut-biosdevname-In-SUSE-biosdevname-package-is-in.patch
- dracut: nbd: Only complain of missing binary in hostonly mode
  if rootfs is on nbd
  * Add: 0092-dracut-nbd-Only-complain-of-missing-binary-in-hoston.patch
- 95iscsi: generate commandline for software iscsi (bnc#880108)
  * Add: 0093-95iscsi-generate-commandline-for-software-iscsi.patch
- Implement shortcut 'ip=<ifname>:static' for static configuration
  * Add: 0094-Implement-shortcut-ip-ifname-static-for-static-confi.patch
- 95iscsi: use static configuration for software iscsi (bnc#884768)
  * Add: 0095-95iscsi-use-static-configuration-for-software-iscsi.patch
- dracut: Fix error: local: can only be used in a function
  * Add: 0096-dracut-Fix-error-local-can-only-be-used-in-a-functio.patch
- Implement 'rd.timeout' to modify the device timeout (bnc#878770)
  * Add: 0097-Implement-rd.timeout-to-modify-the-device-timeout.patch
- Do not call 'lvm' for non-LVM device-mapper devices
  * Add: 0098-Do-not-call-lvm-for-non-LVM-device-mapper-devices.patch
- 90multipath: Load device_handler modules early during boot (bnc#871617)
  * Add: 0099-90multipath-Load-device_handler-modules-early-during.patch

-------------------------------------------------------------------
Fri Jun 27 15:23:37 CEST 2014 - hare@suse.de

- 91zipl: Add new module for s390x configuration changes (bnc#884743)
  * Add: 0088-91zipl-Add-new-module-to-update-s390x-configuration.patch

-------------------------------------------------------------------
Thu Jun 26 16:41:58 CEST 2014 - hare@suse.de

- 95dasd_rules: Fixup rd.dasd parsing
  * Add: 0079-95dasd_rules-fixup-rd.dasd-parsing.patch
- 95dasd_rules: Print out rd.dasd command-line
  * Add: 0080-95dasd_rules-print-out-rd.dasd-commandline.patch
- 95dasd_mod: do not set module parameter
  * Add: 0081-95dasd_mod-do-not-set-module-parameters-if-dasd_cio_.patch
- 00warpclock: Check for /sbin/hwclock (bnc#884513)
  * Add: 0082-00warpclock-check-for-sbin-hwclock.patch
- 95zfcp_rules: Fixup rd.zfcp parsing
  * Add: 0083-95zfcp_rules-Fixup-rd.zfcp-parsing.patch
- 95rootfs_block: terminate commandline parameter
  * Add: 0084-95rootfs-block-Correctly-terminate-commandline-param.patch
- 95zfcp_rules: Print out rd.zfcp command-line
  * Add: 0085-95zfcp_rules-print-out-rd.zfcp-commandline-parameter.patch
- 95zfcp_rules: Auto-generate ipl device rule
  * Add: 0086-95zfcp_rules-Auto-generate-udev-rule-for-ipl-device.patch
- 95dasd_rules: Auto-generate ipl device rule
  * Add: 0087-95dasd_rules-Auto-generate-udev-rule-for-ipl-device.patch

-------------------------------------------------------------------
Mon Jun 23 14:13:53 CEST 2014 - hare@suse.de

- More empty commandline fixes
  * Add: 0074-More-empty-cmdline-fixes.patch
- 95dasd_rules: enable parsing of rd.dasd= commandline parameter
  * Add: 0075-95dasd_rules-enable-parsing-of-rd.dasd-commandline-p.patch
- Correctly set cio_ignore for dynamic s390 rules
  * Add: 0076-Correctly-set-cio_ignore-for-dynamic-s390-rules.patch
- 90multipath: add missing 11-dm-mpath.rules file (bnc#883149)
  * Add: 0077-90multipath-add-missing-11-dm-mpath.rules-file.patch
- Restore original IFS value (bnc#883770)
  * Add: 0078-Restore-original-IFS-value.patch

-------------------------------------------------------------------
Wed Jun 18 02:00:28 CEST 2014 - tbehrens@suse.com

- Fix non-export of journal dev boot options
  * Add: 0071-Fix-non-export-of-journal-dev-boot-options.patch
- Also export root= boot param for hostonly-cmdline
  * Add: 0072-Also-export-root-boot-param-for-hostonly-cmdline-cas.patch
- Don't create lots of empty cmdline files
  * Add: 0073-Don-t-create-lots-of-empty-cmdline-files-for-hostonl.patch

-------------------------------------------------------------------
Tue Jun 17 16:58:03 CEST 2014 - hare@suse.de

- 81cio_ignore: rewrite module to not mount any filesystem
  (bnc#882685)
  * Add: 0070-81cio_ignore-rewrite-module.patch

-------------------------------------------------------------------
Tue Jun 17 11:14:07 CEST 2014 - hare@suse.de

- 81cio_ignore: ignore module if cio_ignore is not specified
  (bnc#882685)
  * Add:
    0069-81cio_ignore-skip-module-if-cio_ignore-is-not-active.patch

-------------------------------------------------------------------
Mon Jun 16 14:17:43 CEST 2014 - hare@suse.de

- 40network: always start netroot in ifup.sh (bnc#881235)
  * Add: 0066-40network-always-start-netroot-in-ifup.sh.patch
- 95fcoe: check() always returns 255
  * Add: 0067-95fcoe-check-always-returns-255.patch
- 95fcoe-uefi: Test for EFI firmware (bnc#882412)
  * Add: 0068-95fcoe-uefi-Test-for-EFI-firmware.patch

-------------------------------------------------------------------
Fri Jun 13 12:52:27 CEST 2014 - hare@suse.de

- Rename patches to match git repository:
  * Old: more-fips-adjustments.patch
  * New: 0057-01fips-Include-some-more-hmacs.patch
  * Old: dracut-check-supported.patch
  * New: 0058-dracut-add-warning-when-including-unsupported-module.patch
- Add 99suse module to git repository:
  * Remove: parse-suse-initrd.sh
  * Remove: module-setup-initrd.sh
  * Add: 0059-99suse-Add-SUSE-specific-initrd-parsing.patch
- Add write-ifcfg-suse.sh to git repository:
  * Remove: write-ifcfg-suse.sh
  * Add: 0060-45ifcfg-Add-SUSE-specific-write-ifcfg-file.patch
- Fixup error messages in write-ifcfg-suse.sh (bnc#881286)
  * Add: 0061-45ifcfg-Fixup-error-message-in-write-ifcfg-suse.patch
- Add missing 'libgcc_s.so' library (bnc#881692):
  * Add: 0062-95iscsi-Install-libgcc_s-library.patch
  * Add: 0063-90multipath-Install-libgcc_s-library.patch
- Install missing scsi_dh_alua module (bnc#871617)
  * Add: 0064-90kernel-modules-install-scsi_dh_alua.patch
- 95iscsi: fixup bnx2i offload booting (bnc#855747)
  * Add: 0065-95iscsi-Fixup-bnx2i-offload-booting.patch

-------------------------------------------------------------------
Wed Jun 11 18:17:34 UTC 2014 - jeffm@suse.com

- Add option to warn if unsupported modules are added to the initramfs
  - Enable this option for 'make install' when a kernel with
    CONFIG_SUSE_KERNEL_SUPPORTED enabled is used. (bnc#882332)
  - Add dracut-check-supported.patch

-------------------------------------------------------------------
Wed Jun 11 12:49:44 UTC 2014 - meissner@suse.com

- include the several hmacs needed for FIPS integrity checking
  of cryptsetup, libgcrypt, libfipscheck1. Also add the openssl
  HMACs too as someone else seems to use those too.
  Add: more-fips-adjustments.patch

-------------------------------------------------------------------
Wed Jun  4 14:58:55 CEST 2014 - hare@suse.de

- Rediff patches to match git repository
- 95fcoe: Check for FCoE devices prior to binaries
  * Modify 0055-95fcoe-Only-install-fcoe-module-if-required.patch
- 99base: Install chown instead of chgrp
  * Modify 0052-99base-Add-chown-binary.patch
- 95iscsi: do not try to detect iSCSI firmware during booting;
  should be handled via commandline parameter
  * Modify 0030-95iscsi-Autodetect-iSCSI-firmware.patch
- Rename patch:
  * old: 0051-mkinitrd-suse-add-update-booloader-message.patch
    new: 0051-mkinitrd-suse-add-update-bootloader-message.patch

-------------------------------------------------------------------
Wed Jun  4 14:30:07 CEST 2014 - hare@suse.de

- Rename patches to match git repository:
  * old: 0013-Correct-paths-for-openSUSE.patch
    new: 0011-Correct-paths-for-openSUSE.patch
  * old: 0014-Check-for-plymouth-lib-directories.patch
    new: 0012-Check-for-plymouth-lib-directories.patch
  * old: dracut_do_not_update_booloader_if_no_kernel_is_found.patch
    new: 0013-mkinitrd-suse-do-not-update-bootloader-if-no-kernel-.patch
  * old: suse_grub_manpage.patch
    new: 0014-Update-dracut-manpage-for-GRUB-Legacy-and-GRUB2.patch
  * old: replace_dhclient_with_wickedd_dhcp_supplicants.patch
    new: 0015-40network-replace-dhclient-with-wickedd-dhcp-supplic.patch
  * old: 0015-add-new-s390x-specific-rule-files.patch
    new: 0016-Add-new-s390x-specific-rule-files.patch
  * old: change_write_ifcfg_to_suse.patch
    new: 0017-45ifcfg-use-distro-specific-scripts.patch
  * old: dracut-fix-whitespace-add-drivers_call.patch
    new: 0018-mkinitrd-suse-Fix-whitespaces-when-adding-drivers.patch
  * old: wait_for_network_race_condition_fix.patch
    new: 0019-40network-Fix-race-condition-when-wait-for-networks.patch
  * old: dracut-warpclock_module.patch
    new: 0020-00warpclock-Set-correct-timezone.patch
  * old: s390-dcssblk.patch
    new: 0021-95dcssblk-Add-new-module-for-DCSS-block-devices.patch
  * old: dracut-install-persistent-rule.patch
    new: 0022-95udev-rules-add-persistent-network-rule.patch
  * old: dracut-really-always-add-autofs4.patch
    new: 0023-systemd-always-tries-to-load-autofs4.patch
  * old: mdraid-setup.patch
    new: 0024-Fixup-mdraid-setup.patch
  * old: 0015-95udev-rules-Add-59-scsi-sg_utils.rules.patch
    new: 0025-95udev-rules-Add-59-scsi-sg_utils.rules.patch
  * old: 0016-90multipath-add-67-kpartx-compat.rules.patch
    new: 0026-90multipath-add-67-kpartx-compat.rules.patch
  * old: 0017-90multipath-install-dracut-specific-service-file.patch
    new: 0027-90multipath-install-dracut-specific-service-file.patch
  * old: 0020-95udev-rules-Include-correct-sg3_utils-rules.patch
    new: 0028-95udev-rules-Include-correct-sg3_utils-rules.patch
  * old: 0021-90multipath-install-correct-multipath-rules.patch
    new: 0029-90multipath-install-correct-multipath-rules.patch
  * old: add_dracuts_network_params_for_iscsi.patch
    new: 0030-95iscsi-Autodetect-iSCSI-firmware.patch
  * old: 0022-90multipath-Fixup-service-file-for-booting.patch
    new: 0031-90multipath-Fixup-service-file-for-booting.patch
  * old: 0023-mkinitrd-suse.sh-Use-hostonly-and-hostonly-cmdline-c.patch
    new: 0032-mkinitrd-suse.sh-Use-hostonly-and-hostonly-cmdline-c.patch
  * old: 0024-95iscsi-Set-correct-iscsi_started-value-for-iSCSI-fi.patch
    new: 0033-95iscsi-Set-correct-iscsi_started-value-for-iSCSI-fi.patch
  * old: 0025-dracut_continue_adding_modules_also_on_error.patch
    new: 0034-dracut-Do-not-stop-installing-drivers-if-one-fails.patch
  * old: 0026-force_to_add_and_load_kernel_modules_other_than_via_boot_param.patch
    new: 0035-Introduce-force-drivers-parameter-and-force_drivers-.patch
  * old: 0027-95fcoe-Store-current-configuration-in-dracut-cmdline.patch
    new: 0036-95fcoe-Store-current-configuration-in-dracut-cmdline.patch
  * old: 0028-95fcoe-update-fcoe-interface-check.patch
    new: 0037-95fcoe-update-fcoe-interface-check.patch
  * old: 0029-95fcoe-start-lldpad-separately.patch
    new: 0038-95fcoe-start-lldpad-separately.patch
  * old: 0030-dracut-mkinitd_cleanup_force_host_only_var.patch
    new: 0039-Remove-force-parameter-from-mkinitrd.patch
  * old: 0031-95fcoe-skip-VLAN-devices-in-fcoe-up.patch
    new: 0040-95fcoe-skip-VLAN-devices-in-fcoe-up.patch
  * old: 0033-dracut_hostonly_hostonly_cmdline_default.patch
    new: 0041-mkinitd-suse-remove-hostonly-and-hostonly-cmdline.patch
  * old: 0034-suse.conf.example_extend.patch
    new: 0042-Enhance-suse.conf-example-with-SUSE-specific-setting.patch
  * old: 0035-always_add_network.patch
    new: 0043-40network-always-add-network-module.patch
  * old: 0036-add_extra_debug_binaries.patch
    new: 0044-Add-find-to-debug-binaries.patch
  * old: 0037-fix_s390_network_modules_install.patch
    new: 0045-40network-add-missing-_arch-variable-declaration.patch
  * old: 0038-remove_waiting_for_swap_dev.patch
    new: 0046-dracut-Do-not-wait-for-swap-device.patch
  * old: 0039-s390_no_resume_module.patch
    new: 0047-95resume-skip-module-for-s390-x.patch
  * old: 0041-only_enable_network_if_explicitly_requested.patch
    new: 0048-40network-Only-enable-network-interfaces-if-explicit.patch
  * old: 0042-ibft_autoconfig_param.patch
    new: 0049-95iscsi-Use-ip-ibft-for-ibft-autoconfiguration.patch
  * old: 0043-fcoe_strip_quotes.patch
    new: 0050-95iscsi-strip-one-set-of-quotes-when-calling-initque.patch
  * old: 0044-Add_update_bootloader_msg.patch
    new: 0051-mkinitrd-suse-add-update-booloader-message.patch
  * old: 0045-add-chown_binary.patch
    new: 0052-99base-Add-chown-binary.patch
  * old: dracut-fips-module-loading-fixes.patch
    new: 0053-01fips-fixup-loading-issues.patch
  * old: 0046-ibft_update_cmdline_printing.patch
    new: 0054-95iscsi-update-commandline-printing.patch
  * old: 0047-only_install_fcoe_if_required.patch
    new: 0055-95fcoe-Only-install-fcoe-module-if-required.patch
  * old: 0048-cio_ignore.patch
    new: 0056-81cio_ignore-handle-cio_ignore-commandline.patch

-------------------------------------------------------------------
Mon Jun  2 18:29:33 UTC 2014 - trenn@suse.de

- Mount zipl device on S390 (bnc#874902)
  Add 0048-cio_ignore.patch

-------------------------------------------------------------------
Mon Jun  2 11:42:59 UTC 2014 - trenn@suse.de

- Only install fcoe if required
  and suppress require-binaries output
  Add 0047-only_install_fcoe_if_required.patch
- ibft: Correctly show ibft cmdline via print-cmdline
  Add 0046-ibft_update_cmdline_printing.patch

-------------------------------------------------------------------
Mon Jun  2 09:07:27 UTC 2014 - meissner@suse.com

- dracut-fips-module-loading-fixes.patch: bnc#875855
  - adjust FIPS module list
  - on architecture specific modules, failing loading is not
    critical
- ship 98selinux, for people that want to use SELinux.

-------------------------------------------------------------------
Wed May 28 15:54:26 UTC 2014 - trenn@suse.de

- Update to latest git HEAD: commit 0fa5dbedc5b222435f51f7460a81232ee120c4e1
  Tue May 20 13:23
  Modified dracut_v37_to_HEAD.patch
  Modified mdraid-setup.patch
  Modified dracut-install-persistent-rule.patch
  Removed  0032-98systemd-fixup-rootfs-generator-installation-path.patch
- Add /etc/dracut.d.conf/01-dist modifications to file instead of writing
  to it via rpm build section
  Add 0033-dracut_hostonly_hostonly_cmdline_default.patch
  Add 0034-suse.conf.example_extend.patch
- Cleanup mkinitrd-suse.sh:
    * Remove hostonly and hostonly-cmdline -> this is done via 01-dist config
      file now
- Always add network module based on modules_setup.sh check() function and not
  via 01-dist config file
  Add 0035-always_add_network.patch
- Add find to debug binaries - Useful and harmless
  Add 0036-add_extra_debug_binaries.patch
- Fix adding of network modules for s390 (bnc#879302)
  Add 0037-fix_s390_network_modules_install.patch
- Omit resume module on s390(x) - There is no suspend on s390
  Add 0039-s390_no_resume_module.patch
- Do not wait for swap - This causes trouble with Rudi's autobuild images:
  Add 0038-remove_waiting_for_swap_dev.patch
- Fcoe and ibft fixes (bnc#879038):
  Add 0041-only_enable_network_if_explicitly_requested.patch
  Add 0042-ibft_autoconfig_param.patch
  Add 0043-fcoe_strip_quotes.patch
- Print message when starting to update bootloader
  Add 0044-Add_update_bootloader_msg.patch
- ToDo: Pass hostonly variable earlier so that is always avail in check()
  function. Still already add:
  Add 0040-fcoe_fix_check_function.patch
- Add chown to initrd (bnc#879767)
  Add 0045-add-chown_binary.patch
- Use parallel pixz instead of xz binary to compress the initrd

-------------------------------------------------------------------
Tue May 20 08:59:51 UTC 2014 - trenn@suse.de

- From Hannes Reinecke <hare@suse.com>:
  fixup rootfs-generator installation path (bnc#878714)
  Add 0032-98systemd-fixup-rootfs-generator-installation-path.patch

-------------------------------------------------------------------
Mon May 19 16:05:49 UTC 2014 - trenn@suse.de

- Corrected previous patch
  Modified: 0031-95fcoe-skip-VLAN-devices-in-fcoe-up.patch

-------------------------------------------------------------------
Mon May 19 11:11:42 UTC 2014 - trenn@suse.de

- From Hannes Reinecke <hare@suse.com>:
  skip VLAN devices in fcoe-up (bnc#878583)
  Add: 0031-95fcoe-skip-VLAN-devices-in-fcoe-up.patch

-------------------------------------------------------------------
Thu May 15 14:07:44 UTC 2014 - trenn@suse.de

- By Hannes Reinecke <hare@suse.com>:
  - Fixup FCoE booting (bnc#877288)
    * Add 0027-95fcoe-Store-current-configuration-in-dracut-cmdline.patch
    * Add 0028-95fcoe-update-fcoe-interface-check.patch
    * Add 0029-95fcoe-start-lldpad-separately.patch
- Cleanup host_only variable using in mkinitrd
- Remove --force parameter from mkinitrd, we always force anyway
    * Add 0030-dracut-mkinitd_cleanup_force_host_only_var.patch
- Remove acpi parameter from mkinitrd, this is done differently nowadays
- Adjust manpage accordingly

-------------------------------------------------------------------
Wed May 14 12:42:37 UTC 2014 - meissner@suse.com

- also do the service magic in %post/%postun, otherwise
  purge-kernels will not get enabled.

-------------------------------------------------------------------
Wed May  7 15:25:37 UTC 2014 - trenn@suse.de

- Do not inst binaries explicitly into /bin or /usr/bin, it is already taken
  care of internally for that:
     Delete 0006-Install-bin-mount.patch
     Modify 0013-Correct-paths-for-openSUSE.patch
- Do not stop trying to load drivers (via add-drivers or filesystems) if one
  fails
     Add 0025-dracut_continue_adding_modules_also_on_error.patch
- Introduce force-drivers. mkinitrd should use this one instead of add-drivers
  later, if accepted mainline
     Add
  0026-force_to_add_and_load_kernel_modules_other_than_via_boot_param.patch

-------------------------------------------------------------------
Mon May  5 08:55:37 CEST 2014 - hare@suse.de

- Update add_dracuts_network_params_for_iscsi.patch to detect
  be2iscsi firmware devices
- Remove obsolete patch fix-iscsi-firmware.sh
- Fixup iscsi firmware booting with be2iscsi (bnc#873448):
  Added 0024-95iscsi-Set-correct-iscsi_started-value-for-iSCSI-fi.patch
- Renamed mkinird_differ_host_and_cmdline_only_properly.patch to
  0023-mkinitrd-suse.sh-Use-hostonly-and-hostonly-cmdline-c.patch

-------------------------------------------------------------------
Wed Apr 30 15:18:45 UTC 2014 - trenn@suse.de

- Update to lateste git HEAD 48b7ab1b35adf1f3f09f883ef14ea0a3fba1e468
    Added:     dracut_v37_to_HEAD.patch
    Modified:  0013-Correct-paths-for-openSUSE.patch
    Modified:  mdraid-setup.patch
    Modified:  replace_dhclient_with_wickedd_dhcp_supplicants.patch
    Deleted:   0018-fstab-do-not-mount-and-fsck-from-fstab-if-using-syst.patch
    Deleted:   0019-dracut-initqueue-service-runs-before-remote-fs-pre.t.patch

- Fix lvm and other possible not working thing due to new parameter:
  hostonly-cmdline which has to be active by default
    bnc#874000 bnc#874905 bnc#874363
    Added:     mkinird_differ_host_and_cmdline_only_properly.patch
- Make write-ifcfg-suse.sh more update robust
  Avoid rebasing of diff with every update touching this file by adding
  write-ifcfg-suse.sh as source file and copy/link in .spec file.
    Modified:  change_write_ifcfg_to_suse.patch

-------------------------------------------------------------------
Tue Apr 29 15:43:28 UTC 2014 - meissner@suse.com

- consolidate -fips-aesni into -fips again. The problem due to it
  was split off upstream was solved in the kernel.

-------------------------------------------------------------------
Fri Apr 25 13:48:45 UTC 2014 - meissner@suse.com

- Create new -fips and -fips-aesni subpackage for kernel
  integrity checking. bnc#856310 FATE#316930
- add spaces around "network" in 01-dist.conf, as the addmodules
  list is concatenated and you never know which config is before or
  after and what it does.

-------------------------------------------------------------------
Wed Apr 16 09:56:31 CEST 2014 - hare@suse.de

- Enable multipath correctly during booting (bnc#873686)
  Add: 0022-90multipath-Fixup-service-file-for-booting.patch

-------------------------------------------------------------------
Mon Apr 14 14:19:49 UTC 2014 - pwieczorkiewicz@suse.com

- fix-iscsi-firmware.patch:
  Fix according to dracut-037 updates (iscsistarted-iscsi:).

-------------------------------------------------------------------
Mon Apr 14 09:00:26 UTC 2014 - pwieczorkiewicz@suse.com

- add_dracuts_network_params_for_iscsi.patch:
  Add missing dracut's cmdline parameters to make network mandatory
  and boot using iBFT when present. Without them iBFT booting does
  not work.

-------------------------------------------------------------------
Fri Apr 11 13:07:05 CEST 2014 - hare@suse.de

- Install correct rule files for multipath support (bnc#873151)
  Add: 0020-95udev-rules-Include-correct-sg3_utils-rules.patch
  Add: 0021-90multipath-install-correct-multipath-rules.patch

-------------------------------------------------------------------
Thu Apr 10 14:49:23 UTC 2014 - trenn@suse.de

- Do not always try to add iscsi module, let its check function decide
- Compress initrd with xz --check=crc32 -6 by default

-------------------------------------------------------------------
Wed Apr  9 16:47:27 UTC 2014 - crrodriguez@opensuse.org

- Remove the bootchart module, note that we still keep 
  the systemd-bootchart one which provides similar functionality.

-------------------------------------------------------------------
Wed Apr  9 16:42:49 UTC 2014 - crrodriguez@opensuse.org

- Remove the busybox module we have all basic tools already 
  in the initrd
- _unitdir is always defined nowadays, remove the conditionals.

-------------------------------------------------------------------
Wed Apr  9 14:48:12 UTC 2014 - sfalken@opensuse.org

- Replaced dracut tarball with proper upstream tarball
  Add: dracut-037.tar.xz

-------------------------------------------------------------------
Tue Apr  8 10:16:16 CEST 2014 - hare@suse.de

- Update dracut to 037
  * Add --hostonly_cmdline switch
  * Update --mount syntax
  * Include modules from /updates directory
  * Fixes for network setup
  * Some small fixes
- Rediff patches
- Include iscsiuio again (bnc#872474)
  Remove: remove-iscsiuio.patch
- Install 59-scsi-sg_utils.rules (bnc#872478)
  Add: 0015-95udev-rules-Add-59-scsi-sg_utils.rules.patch
- Install 67-kpartx-compat.rules (bnc#872662)
  Add: 0016-90multipath-add-67-kpartx-compat.rules.patch
- Install separate multipath service file (bnc#871610)
  Add: 0017-90multipath-install-dracut-specific-service-file.patch
- Do not fsck and mount from fstab if systemd is used (bnc#
  Add: 0018-fstab-do-not-mount-and-fsck-from-fstab-if-using-syst.patch
- Fixup initqueue for remote-fs
  Add: 0019-dracut-initqueue-service-runs-before-remote-fs-pre.t.patch

-------------------------------------------------------------------
Thu Apr  3 23:59:31 UTC 2014 - crrodriguez@opensuse.org

- revert last change, ucode-intel is not mandatory and 
  will get installed by default anyway, either via patterns
  or by modalias dependencies in the package itself.

-------------------------------------------------------------------
Thu Apr  3 19:07:30 UTC 2014 - crrodriguez@opensuse.org

- Require package ucode-intel in x86*

-------------------------------------------------------------------
Tue Apr  1 06:23:28 UTC 2014 - nfbrown@suse.com

- mdraid-setup.patch
  Make mdraid scripts work with latest mdadm.
  Without this, boot from DDF or IMSM array fails if
  one device is missing (bnc#866660)

-------------------------------------------------------------------
Fri Mar 28 17:39:08 UTC 2014 - trenn@suse.de

- systemd always tries to load autofs4 otherwise it reports:
  Failed to insert module 'autofs4'
  dracut already adds it, but only if loaded already.
  Always load autofs4 even if not already loaded (bnc#869411)
  Add: dracut-really-always-add-autofs4.patch

-------------------------------------------------------------------
Tue Mar 25 18:18:56 UTC 2014 - trenn@suse.de

- Fix installkernel script bnc#862990

-------------------------------------------------------------------
Fri Mar 14 19:49:38 UTC 2014 - rmilasan@suse.com

- Add support for 70-persistent-net.rules in dracut (bnc#868375)
  Add: dracut-install-persistent-rule.patch

-------------------------------------------------------------------
Fri Mar 14 15:09:37 UTC 2014 - trenn@suse.de

- CRITICAL: Fix add-drivers passing from mkinitrd to dracut bnc#868397

-------------------------------------------------------------------
Wed Mar 12 14:50:50 UTC 2014 - trenn@suse.de

- Add s390 dcssblk driver and introduce rd.dcssblk= to pass mounts that should
  get activated at initrd stage fate#308263
  Add: s390-dcssblk.patch

-------------------------------------------------------------------
Fri Mar  7 13:14:39 UTC 2014 - trenn@suse.de

- bnc#830060 - Dracut is missing warpclock/hwclock
  Add dracut-warpclock_module.patch

-------------------------------------------------------------------
Wed Mar  5 15:25:32 UTC 2014 - pwieczorkiewicz@suse.com

- wait_for_network_race_condition_fix.patch:
  * In case of no network related params are specified, but rd.neednet=1
    is set, default initqueue action is to wait until one of the network
    interfaces is marked as set up properly. (bnc#866771)
  * It also helps with initqueue's race condition when network interface 
    shows up late.
- replace_dhclient_with_wickedd_dhcp_supplicants.patch:
  Add a missing network setup flag. (bnc#866771)

-------------------------------------------------------------------
Mon Mar  3 16:51:30 UTC 2014 - trenn@suse.de

- Merge all dracut-* packages to one dracut.rpm package.
  Subpackages only had one or two minor files not worth splitting a package
  or dracut-network had important modules which should (like former main
  dracut package) always get installed
- libcap does not exist and libcap2 or friends are not needed
  -> remove Requires: libcap
- Reorder (sort) the files section a bit

-------------------------------------------------------------------
Mon Mar  3 16:30:48 UTC 2014 - trenn@suse.de

- Fix bug introduced with last commit: Bad whitespace logic when
  INITRD_MODULES contain more than one module.

-------------------------------------------------------------------
Thu Feb 27 14:08:56 UTC 2014 - trenn@suse.de

- Make sure that --add-drivers is not called with whitespace string which
  will lead to a "read line" user input request and things may get stuck at
  installation.
  - Add: dracut-fix-whitespace-add-drivers_call.patch
- Remove s390 grub module again -> this will go into grub2 package
  (ask rw@suse.de for details)
  Delete/remove: s390_add-user-space-grub-rule.patch
- Add installkernel script which installs the kernel when:
  make install
  is invoked. The script from mkinitrd has been taken over and adopted.
  Added source: dracut-installkernel
  bnc#862990

-------------------------------------------------------------------
Fri Feb 21 14:56:20 UTC 2014 - trenn@suse.de

- Fix syntax error -> missing then
- Correct path, it is /usr/bin/grub2-emu

-------------------------------------------------------------------
Mon Feb 17 18:51:58 UTC 2014 - trenn@suse.de

- autofs4 is always included since mainline git commit: 314929920f27448b45bfd
  systemd: ensure autofs4 and ipv6 are included
- Always add network and iscsi dracut module, so that ibft, iscsi, nfsroot
  work as expected.

-------------------------------------------------------------------
Fri Feb 14 14:02:52 UTC 2014 - pwieczorkiewicz@suse.com

- change_write_ifcfg_to_suse.patch:
  Detect the system flavor and write the ifcfg files accordingly.

-------------------------------------------------------------------
Fri Feb 14 13:10:28 UTC 2014 - trenn@suse.de

Originally by Hannes Reinecke (hare@suse.de):
- Install new s390x specific udev rules (bnc#856585)
  - Add: 0015-add-new-s390x-specific-rule-files.patch
- Do not check for non-existing dasd_configure for s390x (bnc#856585)

-------------------------------------------------------------------
Thu Feb 13 21:38:38 UTC 2014 - jjolly@suse.com

- Added 95grub2 module for s390x

-------------------------------------------------------------------
Thu Feb 13 14:10:16 UTC 2014 - pwieczorkiewicz@suse.com

- remove-iscsiuio.patch:
  Remove iscsiuio references as this one is not present in SLE-12.

-------------------------------------------------------------------
Thu Feb 13 14:10:08 UTC 2014 - pwieczorkiewicz@suse.com

- fix-iscsi-firmware.patch:
  Fix iSCSI iBFT boot up problem introduced with mainline changes

-------------------------------------------------------------------
Thu Feb 13 14:09:55 UTC 2014 - pwieczorkiewicz@suse.com

- replace_dhclient_with_wickedd_dhcp_supplicants.patch:
  Replace dhclient with wickedd-dhcp4 and wickedd-dhcp6. Script up dhcp
  functionality in ifup.sh.

-------------------------------------------------------------------
Thu Feb 13 06:28:01 UTC 2014 - sfalken@opensuse.org

-Added bug number to previous changelog entry

-------------------------------------------------------------------
Thu Feb 13 05:40:32 UTC 2014 - sfalken@opensuse.org

-Updated suse_grub_manpage.patch to further correct for incorrect grub configuration paths 
 bnc#858448
-------------------------------------------------------------------
Wed Feb 12 21:42:55 UTC 2014 - sfalken@opensuse.org

-Updated suse_grub_manpage.patch for dracut-036

-------------------------------------------------------------------
Wed Feb 12 12:48:16 UTC 2014 - sfalken@opensuse.org

-Added patch to fix manpage to reflect openSUSE GRUB Legacy and GRUB2

- removed patches:
  * dracut_git_v034_to_head.patch
-------------------------------------------------------------------
Sun Feb  9 12:41:01 UTC 2014 - tchvatal@suse.com

- Cleanup with spec-cleaner.

-------------------------------------------------------------------
Sun Feb  9 12:38:52 UTC 2014 - tchvatal@suse.com

- Version bump to 036 removing the need for patching from git.

- removed patch:
  * dracut_git_v034_to_head.patch

-------------------------------------------------------------------
Fri Jan 31 13:49:27 UTC 2014 - trenn@suse.de

- Do not show usage error when no kernel was found.
  This may happen several times at package installation time and floods
  the logs.
  Modify dracut_do_not_update_booloader_if_no_kernel_is_found.patch

-------------------------------------------------------------------
Tue Jan 14 14:10:06 UTC 2014 - trenn@suse.de

- Correctly fix previous issue:
  Exit without calling update-bootloader (bnc#858268)
  Currently mkinitrd will always exit early without creating an initrd at all.
  Rebase: dracut_do_not_update_booloader_if_no_kernel_is_found.patch
- Remove an obsolete comment from .spec file

-------------------------------------------------------------------
Mon Jan 13 17:52:51 UTC 2014 - trenn@suse.de

Exit without calling update-bootloader (bnc#858268):
Add:  dracut_do_not_update_booloader_if_no_kernel_is_found.patch

Adding:
Requires:       systemd-sysvinit
which has reboot, halt and other binaries dracut likes to add to the initrd.

Cleanup and adjust to latest mainline:
Dropping as these are included in the latest update_git_v034_to_head patch:
Drop: 0001-95dasd-Install-kernel-modules-only-once.patch
Drop: 0002-95dasd-Only-install-module-if-normalize_dasd_arg-is-.patch
Drop: 0003-95dasd_mod-make-dasd_cio_free-optional.patch
Drop: 0004-95zfcp-Make-installation-optional.patch
Drop: 0005-95znet-Make-installation-optional.patch
Drop: 0007-Fixup-keymap-setting-for-openSUSE.patch
Drop: 0008-Add-DASD-configuration-for-SuSE.patch
Drop: 0009-Add-zfcp-scripts-for-SUSE.patch
Drop: 0010-Make-logfile-configurable.patch
Drop: 0011-mkinitrd-suse-Add-SUSE-compability-wrapper-for-dracu.patch
Drop: 0012-mkinitrd-suse.8.asc-Add-manpage-for-SUSE-compat-mkin.patch
Drop: 0015-Fixup-script-permissions.patch
Drop: 0016-Remove-shebang-from-shell-completion-files.patch
Drop: dracut-git-update.patch

Rebase: 0013-Correct-paths-for-openSUSE.patch

This is a rename of dracut-git-update.patch to:
Add:  dracut_git_v034_to_head.patch

-------------------------------------------------------------------
Fri Dec 20 14:17:54 UTC 2013 - trenn@suse.de

- Cleanup: Remove %define replace_mkinitrd 1
  and related conditionals in .spec file -> One either has to install
  dracut or mkinitrd and it will stay like that.

-------------------------------------------------------------------
Wed Dec 18 16:20:04 UTC 2013 - trenn@suse.de

- Add purge kernel service/feature which before was part of mkinitrd
  bnc#854348

-------------------------------------------------------------------
Thu Nov 28 09:56:36 CET 2013 - hare@suse.de

- Update with patches from git repository:
   * kernel-modules: add ohci-pci to the list of forced module installs
   * Run 'xz' and 'lzma' with multiple threads
   * systemd: do not exit the initqueue, if systemd asks a password
   * iscsi,nbd: do not fail in hostonly mode
   * dracut-functions.sh: Avoid loading unnecessary 32-bit libraries
     for 64-bit initrds
   * fips: also install /etc/system-fips in the initramfs
   * dracut.modules.7.asc: removed empty section
   * dracut.sh: fixed PATH shortener
   * dracut.spec: move /sbin/dracut to /usr/sbin/dracut
   * iscsi/nbd: do not try to mount the whole disk, if root= is missing
   * fips: include crct10dif_generic
   * Handle crypto modules with and without modaliases
   * usrmount/module-setup.sh: fixed typo
   * lvm: always install thin utils for lvm
   * kernel-modules(ARM): add mmc_block usb_storage to static list of
     kernel mods
   * dracut-functions.sh:check_block_and_slaves*() skip LVM internal devs
   * mkdir basic dirs in /run
   * network/fcoe: only redirect output to loginit.pipe, if exists
   * dracut.sh: no need to make subdirs in run
   * dracut.sh: also mkdir /run/lock, which is copied to
   * lvm: fix thin recognition
   * Add lzo, lz4 compression and read INITRD_COMPRESS
   * remove resume-genrules.sh
   * resume: fix swap detection in hostonly
   * base/init.sh: also mkdir /run/lock
   * dmsquash-live: add /dev/mapper/live-base
   * Doc: cleanup, extend and split and reuse
   * dracut.sh: do not bail out, if kernel modules dir is missing
   * 10i18n/parse-i18n.sh: parse rd.vconsole and rd.locale
   * */module-setup.sh: add comments for dracut called functions
   * lvm: install thin utils for non-hostonly
- Patches for S/390 support
  * 95dasd: Install kernel modules only once
  * 95dasd: Only install module if normalize_dasd_arg is present
  * 95dasd_mod: make dasd_cio_free optional
  * 95zfcp: Make installation optional
  * 95znet: Make installation optional
  * Install /bin/mount
  * Fixup keymap setting for openSUSE
  * Add DASD configuration for SuSE
  * Add zfcp scripts for SUSE
  * Make logfile configurable
  * Add SUSE compability wrapper for dracut
  * Add manpage for SUSE compat mkinitrd
  * Work around xsltproc bug
  * Correct paths for openSUSE
  * Check for plymouth lib directories
- Drop obsolete patches
- Install mkinitrd-suse

-------------------------------------------------------------------
Mon Oct 21 00:13:48 UTC 2013 - hrvoje.senjan@gmail.com

- Remove not needed logrotate Requires

-------------------------------------------------------------------
Thu Oct 17 02:22:43 UTC 2013 - crrodriguez@opensuse.org

- remove use_all_paths_udev.patch, /lib/udev.. is a symlink 
  to /usr nowadays this confuses other parts of the code causing
  errors/warnings during the initrd generation.

-------------------------------------------------------------------
Mon Oct 14 03:48:40 UTC 2013 - crrodriguez@opensuse.org

- version 034 
* fcoe: add FCoE UEFI boot device support
* rootfs-block: add support for the rootfallback= kernel 
  cmdline option
* btrfs: use inst_hook to install the timeout hook

-------------------------------------------------------------------
Sun Oct 13 15:25:37 UTC 2013 - tittiatcoke@gmail.com

- Correct patch mkinitrd-fix-boot-dir-detection. (";;" doesn't 
  really work)

-------------------------------------------------------------------
Wed Oct  9 10:59:01 UTC 2013 - tittiatcoke@gmail.com

- Updated the patch mkinitrd-fix-boot-dir-detection.patch to a 
  more generic validation that the inidcated initrd file doesn't 
  contain a path. If no path is given, then add the default 
  boot_dir.

-------------------------------------------------------------------
Tue Oct  8 18:59:30 UTC 2013 - tittiatcoke@gmail.com

- Fix again the mkinitrd script as that people don't seem to test.
  Added mkinitrd-fix-boot-dir-detection.patch so that an initrd 
  is created.

-------------------------------------------------------------------
Mon Oct  7 08:58:00 UTC 2013 - trenn@suse.de

- Update to mainline git version 033, b7d1b6f904a5b0bdd9a5ad19149f3.
- Remove all patches which went mainline:
  	 generalize_early_cpio.patch
	 microcode_cleanup.patch
	 acpi_override.patch
	 mkinitrd_allow_no_option.patch
	 mkinitrd_allow_multiple_args.patch
	 quiet_options.patch
	 implement_default.patch
	 root_fs.patch
	 suse_host_only.patch
- Fix missing root fs slash in lib/udev/rules.d resulting in:
  /var/tmp/initramfs.Lusf6flib/udev/rules.d
- bcache: removed, it's in the upstream bcache-tools package
  mainline git commit: 49268028b90f6344f79e3510d2
- Fix bad she-bang in mkinitrd_setup_dummy

-------------------------------------------------------------------
Fri Oct  4 17:23:19 UTC 2013 - tittiatcoke@gmail.com

- Add patch mkinitrd_update_bootloader.diff so that after 
  generating the initrd, the update-bootloader is called to update
  grub2.

-------------------------------------------------------------------
Fri Oct  4 16:26:20 UTC 2013 - tittiatcoke@gmail.com

- Validate that the parameters passed with -i (initrd file) does 
  not already contain the boot_dir.

-------------------------------------------------------------------
Fri Oct  4 09:58:17 UTC 2013 - tittiatcoke@gmail.com

- Bring back the versioned Provides/Obsoletes for mkinitrd. 
  Otherwise we run into issues as that udev is conflicting with
  mkinitrd < 2.7.0

-------------------------------------------------------------------
Wed Oct  2 14:54:51 UTC 2013 - trenn@suse.de

- Remove Provides/Obsoletes: mkinitrd versioning.
  Simply obsolete and provide all mkinitrd versions.

-------------------------------------------------------------------
Wed Oct  2 13:19:23 UTC 2013 - mvyskocil@suse.com

- Mark /etc/dracut.conf.d/02-early-microcode.conf as config file

-------------------------------------------------------------------
Wed Sep 25 15:17:57 UTC 2013 - trenn@suse.de

- Add ACPI table override ability:
    generalize_early_cpio.patch #PATCH-FIX-UPSTREAM
    microcode_cleanup           #PATCH-FIX-UPSTREAM
    acpi_override.patch         #PATCH-FIX-UPSTREAM
- This will replace mkinitrd with dracut as the default initrd generator.
  Therefore Prefer: dracut tag in the project config of the repo is needed.
  Otherwise OSC does not know how to build installation-images
  (needing mkinitrd to build) and which package to take.
-  To switch back and try mkinitrd instead of dracut will be:
     Uninstall dracut:
        - rpm -e dracut --nodeps
     And install mkinitrd again:
        - zypper install mkinitrd
- Adjust mkinitrd-dracut.sh to SUSE mkinitrd:
  <none> : Before gives a "usage" error -> now scans /boot for kernels
           and builds corresponding inirtrds for them
  -i -k  : Pass a list of kernels and initrd targets
           (not sure it was worth the hassle to be able to pass)
  -b     : Boot directory to search for kernel images
  -d     : Change root file system. Not tested whether dracut's behavior
           matches exactly what our mkinitrd does.
  -s     : Dummy (should even be obsolete in latest mkinitrd)
  These patches have been submitted, but now feedback from mainline yet:
    mkinitrd_allow_no_option.patch
    mkinitrd_allow_multiple_args
    quiet_options
    implement_default
    root_fs
    suse_host_only
- Write caller and used parameters to syslog if mkinitrd is called.
  So that those can easily be fixed and checked for correctness.
  This should get reverted again before a bigger release.
    This patch will never show up mainline and should also get reverted
    from SUSE factory repo before the next release shows up:
    suse_only_logger
- Build host only images for default paths in SUSE for faster build and
  smaller images. Imply --force in this case as well.
  * suse_host_only.patch

-------------------------------------------------------------------
Sat Sep 21 17:36:13 UTC 2013 - crrodriguez@opensuse.org

- save a few seconds on boot by always including the autofs4 
  kernel module in the initrd

-------------------------------------------------------------------
Sat Sep 21 17:31:15 UTC 2013 - crrodriguez@opensuse.org

- dracut 033 
- improved hostonly device recognition
- improved hostonly module recognition
- do not install udev rules from /etc in generic mode
- fixed LABEL= parsing for swap devices
- fixed iBFT network setup
- removed caching of kernel cmdline
- bcache: support new blkid
- ifup with dhcp, if no "ip=" specified for the interface
- fixed ifup udev rules

-------------------------------------------------------------------
Mon Sep  9 01:09:44 UTC 2013 - crrodriguez@opensuse.org

- After testing, we need to correct a major problem, /usr/bin/mount
 most be installed in /bin/mount on the initrd otherwise boot fails.

-------------------------------------------------------------------
Mon Sep  9 00:23:56 UTC 2013 - crrodriguez@opensuse.org

- version 032 
- add parameter --print-cmdline
- dracut now creates the initramfs without udevadm
that means the udev database does not have to populated
and the initramfs can be built in a chroot with
/sys /dev /proc mounted.
- renamed dracut_install() to inst_multiple() for consistent naming
- if $libdirs is unset, fall back to ld.so.cache paths
- always assemble /usr device in initramfs
- bash module added (disable it, if you really want dash)
- continue to boot, if the main loop times out, in systemd mode
- removed inst*() shell pure versions, dracut-install binary is in charge now
- fixed ifcfg file generation for vlan
- do not include adjtime and localtime anymore
- fixed generation of zfcp.conf of CMS setups
- install vt102 terminfo
- dracut_install() is still there for backwards compat
- do not strip files in FIPS mode
- fixed iBFT interface configuration
- fs-lib: install fsck and fsck.ext*
- shutdown: fixed killall_proc_mountpoint()
- network: also wait for ethernet interfaces to setup
- fixed checking for FIPS mode

-------------------------------------------------------------------
Mon Aug  5 04:30:48 UTC 2013 - crrodriguez@opensuse.org

- version 031_git201308011055
* systemd: add support for kmod static devnodes
* crypt: Wait for udev to settle before unlocking disk
* systemd/dracut-pre-trigger.service: run after systemd-tmpfiles-setup-dev
* systemd: use systemd in the initramfs, if installed on the system

-------------------------------------------------------------------
Sat Aug 3 07:10:55 UTC 2013 - tittiatcoke@gmail.com

- Drop the buildrequire for the microcode_ctl. This package 
  is no longer in Factory and with the latest kernel (3.11) 
  no longer required.

-------------------------------------------------------------------
Sun Jul 28 00:39:55 UTC 2013 - crrodriguez@opensuse.org

- version 030_git201307241235 
* systemd: Replace prefdm.service with display-manager.service
* modsign: do not install, if no keys present
* bcache: add support for bcache
* Use systemd-cat for logging on systemd systems, if logfile is empty

-------------------------------------------------------------------
Sun Jul 21 17:17:58 UTC 2013 - tittiatcoke@gmail.com

- Remove the http link for the Source0. Git snapshots can 
  not be obtained that way. 
  
-------------------------------------------------------------------
Wed Jul 17 20:25:58 UTC 2013 - crrodriguez@opensuse.org

- Version 029_git201307171236
* support early microcode loading in x86

-------------------------------------------------------------------
Thu Jun 27 19:41:46 UTC 2013 - crrodriguez@opensuse.org

- Require pigz instead of gzip

-------------------------------------------------------------------
Tue Jun 18 00:48:24 UTC 2013 - crrodriguez@opensuse.org

- version 029 
* fixes for the networking modules
* fixes for systemd integration
* fixes for the i18n module (removes dracut-font.patch now upstream)

-------------------------------------------------------------------
Thu Jun  6 19:20:47 UTC 2013 - crrodriguez@opensuse.org

- version 027_git201306061213
*  setup correct system time and time zone in initrd
* systemd integration bugfixes
* lvm bugfixes.

-------------------------------------------------------------------
Wed May  8 23:05:40 UTC 2013 - crrodriguez@opensuse.org

- Recommend pigz for faster/parallel compression

-------------------------------------------------------------------
Sat Apr 20 14:55:20 UTC 2013 - crrodriguez@opensuse.org

- Ensure we use display-manager.service instead of prefdm.

-------------------------------------------------------------------
Mon Apr 15 00:59:59 UTC 2013 - crrodriguez@opensuse.org

- Update to 027_git201304121327
* much of patch correct-paths-for-opensuse.patch is no longer
  need so it has shrinked significantly.
* since PRE-027 dracut requires systemd >= 199 reflect that in
  in the rpm buildRequires.

-------------------------------------------------------------------
Wed Apr  3 09:23:22 UTC 2013 - tittiatcoke@gmail.com

- dracut-027
  * systemd module now requires systemd >= 199
  * dracut makes use of native systemd initrd units
  * added hooks for new-kernel-pkg and kernel-install
  * hostonly is now default for fedora
  * comply with the BootLoaderSpec paths
    http://www.freedesktop.org/wiki/Specifications/BootLoaderSpec
  * added rescue module
  * host_fs_types is now a hashmap
  * new dracut argument "--regenerate-all"
  * new dracut argument "--noimageifnotneeded"
  * new man page dracut.bootup
  * install all host filesystem drivers
  * use -D_FILE_OFFSET_BITS=64 to build dracut-install

-------------------------------------------------------------------
Tue Mar 19 21:32:09 UTC 2013 - crrodriguez@opensuse.org

- Update to 026_git201303180829
* bugfixes
* adds bash completion Support
- Most importantly, fix the (silly) compatibility patch 
  that changes the name from initramfs to initrd that went broken
  in last update (all initrds were suffixed by .img)

-------------------------------------------------------------------
Tue Mar 12 22:01:14 UTC 2013 - crrodriguez@opensuse.org

-  dracut-026
- introduce /usr/lib/dracut/dracut.conf.d/ drop-in directory

/usr/lib/dracut/dracut.conf.d/*.conf can be overwritten by the same
  filenames in /etc/dracut.conf.d.

Packages should use /usr/lib/dracut/dracut.conf.d rather than
  /etc/dracut.conf.d for drop-in configuration files.

/etc/dracut.conf and /etc/dracut.conf.d belong to the system administrator.

- uses systemd-198 native initrd units
- totally rely on the fstab-generator in systemd mode for block devices
- dracut systemd now uses dracut.target rather than basic.target
- dracut systemd services optimize themselves away
- fixed hostonly parameter generation
- turn off curl globbing (fixes IPv6)
- modify the udev rules on install and not runtime time
- enable initramfs building without kernel modules (fixed regression)
- in the initqueue/timeout,
  reset the main loop counter, as we see new udev events or initqueue/work
- fixed udev rule installation

-------------------------------------------------------------------
Fri Feb 22 00:16:46 UTC 2013 - crrodriguez@opensuse.org

- Update to 025_git201302211113
* Support out-of-tree and updated drivers in initramfs creation
* shutdown: call "losetup -D" on shutdown
* Mount /proc before including dracut-lib.sh.
* dracut.sh: make /var/log a symlink to /run/log
* systemd/dracut-pre-pivot.sh: remove /dev/root symlink after shell
* kernel-modules: Add ehci support for kernel 3.8+
* Other bugfixes

-------------------------------------------------------------------
Sun Feb  3 02:07:39 UTC 2013 - crrodriguez@opensuse.org

- BuildRequires: pkgconfig(systemd) so %{_unitdir} is defined
  and systemd integration works..

-------------------------------------------------------------------
Mon Jan 28 17:52:28 UTC 2013 - crrodriguez@opensuse.org

- Require modutils instead of module-init-tools.

-------------------------------------------------------------------
Thu Jan 24 09:57:18 UTC 2013 - hrvoje.senjan@gmail.com

- Update to release 025:
  + do not strip signed kernel modules
  + add sosreport script and generate /run/initramfs/sosreport.txt
  + make short uuid specification for allow-discards work
  + turn off RateLimit for the systemd journal
  + fixed MAC address assignment
  + add systemd checkisomd5 service
  + splitout drm kernel modules from plymouth module
  + add 'swapoff' to initramfs to fix shutdown/reboot
  + add team device support
  + add pre-shutdown hook
  + kill all processes in shutdown and report remaining ones
  + "--device" changed to "--add-device" and "add_device=" added 
    for conf files
  + add memory usage trace to different hook points
  + cope with optional field #7 in /proc/self/mountinfo
  + lots of small bugfixes

-------------------------------------------------------------------
Thu Dec  6 20:15:41 UTC 2012 - crrodriguez@opensuse.org

- dracut wants "strip" installed which is part of binutils
  recommend that package

-------------------------------------------------------------------
Mon Nov  5 08:44:30 UTC 2012 - tittiatcoke@gmail.com

- Added additional patches to make dracut work in an openSUSE 
  environment.

- Added patch (use_all_paths_udev.patch) to use both /usr/lib/udev
  and /lib/udev as long as not all packages migrated.
- Added patch (use_initrd_insteadof_initramfs.patch) to change 
  the naming of the generated initrd file to be more openSUSE
- Added patch (use_sysconfig_values_correctly.patch) to read the 
  correct keymap value from /etc/sysconfig. (.gz extension)

-------------------------------------------------------------------
Thu Nov  1 17:47:45 UTC 2012 - tittiatcoke@gmail.com

- Update to release 024:
  + new dracut option "--device"
  + new dracut kernel command line options "rd.auto"
  + new dracut kernel command line options "rd.noverifyssl"
  + new dracut option "--kernel-cmdline" and "kernel_cmdline" 
    option for default parameters
  + fixes for systemd and crypto
  + fix for kexec in shutdown, if not included in initramfs
  + create the initramfs non-world readable
  + prelink/preunlink in the initramfs
  + strip binaries in the initramfs by default now
  + various FIPS fixes
  + various dracut-install fixes

- Added patch (correct-paths-for-opensuse.patch) to ensure correct 
  paths for openSUSE (Plymouth)

-------------------------------------------------------------------
Fri Sep 28 12:10:20 UTC 2012 - fcrozat@suse.com

- Add initramfs-non-world-readable.patch: fix CVE-2012-4453
  (bnc#782734).

-------------------------------------------------------------------
Wed Aug  1 13:39:16 UTC 2012 - fcrozat@suse.com

- Update to release 023:
  + resume from hibernate fixes
  + -N option for --no-hostonly
  + support for systemd crypto handling
  + new dracut module "crypt-loop"
  + deprecate the old kernel command line options
  + more documentation
  + honor CFLAGS for dracut-install build
  + multipath fixes
  + / is mounted according to rootflags parameter but forced ro at
    first. Later it is remounted according to /etc/fstab +
    rootflags parameter and "ro"/"rw".
  + support for xfs / reiserfs separate journal device
  + new "ro_mnt" option to force ro mount of / and /usr
  + root on cifs support
  + dracut-install: fixed issue for /var/tmp containing a symlink
  + only lazy resolve with ldd, if the /var/tmp partition is not
    mounted with "noexec".
  + i18n: fixed inclusion of "include" keymaps
- Drop dracut_makefile_cflags_pass.patch and separate-journal.patch
  (merged upstream)

-------------------------------------------------------------------
Mon Jul 23 15:37:59 UTC 2012 - fcrozat@suse.com

- Update to release 022:
  + fixed host-only kernel module bug
- Changes from release 021:
  + fixed systemd in the initramfs (requires systemd >= 187)
  + dracut-install: massive speedup with /var on the same
    filesystem with COW copy.
  + dracut-install: moved to /usr/lib/dracut until it becomes a
    general purpose toot
  + new options: "rd.usrmount.ro" and "rd.skipfsck"
  + less mount/umount
  + apply "ro" on the kernel command line also to /usr
  + mount according to fstab, if neither "ro" or "rw" is specified
  + skip fsck for xfs and btrfs. remount is enough
  + give emergency_shell if /usr mount failed
  + dracut now uses getopt:
    - options can be position independent now!!
    - we can now use --option=<arg>
  + added option "--kver=<kernel-version>", and the image location
    can be omitted : dracut --kver 3.5.0-0.rc7.git1.2.fc18.x86_64
  + dracut.sh: for --include copy also the symbolic links
  + man pages: lsinitrd and mkinitrd added
  + network: We do not support renaming in the kernel namespace
    anymore (as udev does that not anymore). So, if a user wants to
    use ifname, he has to rename to a custom namespace. "eth[0-9]+"
    is not allowed anymore.
  + resume: moved the resume process to the initqueue.
    This should prevent accidently mounting the root file system.
  + improve running testsuite
- Clean up package to be openSUSE only package and follow openSUSE
  standard.
- Add dracut module to convert openSUSE/SLE initrd cmdline
  parameters into dracut parameters at boot time.
- Add separate-journal.patch: add support for separate journal for
  reiserfs and XFS.

-------------------------------------------------------------------
Thu Jul 12 15:39:12 UTC 2012 - trenn@suse.de

- First check in of version 020
- Fix Makefile so that make -e CFLAGS="$RPM_OPT_FLAGS" can be passed
- Remove Requires on libcap
- some more changes, most sent mainline

Places

File dracut.changes of Package dracut (Revision 098d8b02cee3b4751a5333663b512899)

Places