File yast2-bootloader.changes of Package yast2-bootloader

Overview Repositories Revisions Requests Users Attributes Meta

File yast2-bootloader.changes of Package yast2-bootloader (Revision d0d96159d0d2b06569f856ccafd23183)

Currently displaying revision d0d96159d0d2b06569f856ccafd23183 , Show latest

-------------------------------------------------------------------
Fri Nov 27 14:46:57 CET 2015 - snwint@suse.de

- updated boot doc for prep partitions
- 3.1.162

-------------------------------------------------------------------
Fri Nov 20 07:19:26 UTC 2015 - igonzalezsosa@suse.com

- Fix AutoYaST schema to allow specification of 'vgamode',
  'xen_kernel_append' and 'failsafe_disabled' in globals section
  (bsc#954412)

-------------------------------------------------------------------
Wed Nov 18 12:10:10 UTC 2015 - mvidner@suse.com

- Fix validation of AutoYaST profiles (bsc#954412)

-------------------------------------------------------------------
Tue Nov 17 13:59:40 CET 2015 - shundhammer@suse.de

- Fixed crash in bootloader proposal if previous installation was
  on software RAID (bsc#955216)
- 3.1.161

-------------------------------------------------------------------
Wed Nov 11 11:36:29 UTC 2015 - jreidinger@suse.com

- Do not show raid0 warning for /boot on s390 and ppc architectures
  (bnc#952823)
- 3.1.160

-------------------------------------------------------------------
Fri Oct 23 13:16:59 UTC 2015 - jreidinger@suse.com

- respect original grub2 configuration when upgrade from grub2
  to grub2 (bnc#951731)
- 3.1.159

-------------------------------------------------------------------
Mon Oct 19 16:10:34 UTC 2015 - jreidinger@suse.com

- do not modify bootloader configuration during offline upgrade
  from grub2 to grub2 (bnc#950695,bnc#950162)
- 3.1.158

-------------------------------------------------------------------
Fri Oct 16 14:27:17 CEST 2015 - schubi@suse.de

- Set StorageDevices flag disks_valid to true while cloning system
  in AutoYaST. (bnc#950105)
- 3.1.157

-------------------------------------------------------------------
Thu Oct  1 12:21:31 UTC 2015 - jreidinger@suse.com

- Fix proposing stage1 location in autoyast (bnc#948258)
- 3.1.156

-------------------------------------------------------------------
Tue Sep 29 10:28:42 UTC 2015 - jreidinger@suse.com

- fix device map handling if there's no 'hd0' entry in it
  (bsc#947730) by snwint
- 3.1.155

-------------------------------------------------------------------
Mon Sep 28 15:41:45 CEST 2015 - schubi@suse.de

- Including a needed file. This is an additional fix for
  bnc#930341.
- 3.1.154

-------------------------------------------------------------------
Fri Sep 25 15:22:17 UTC 2015 - jreidinger@suse.com

- fix booting on ppc with /boot on software raid (bnc#940542)
- 3.1.153

-------------------------------------------------------------------
Thu Sep 24 08:53:00 UTC 2015 - jreidinger@suse.com

- fix one click proposal change to behave reasonable
- add warnings for missing generic_mbr or activate when really
  missing (bnc#930341)
- 3.1.152

-------------------------------------------------------------------
Wed Sep 16 08:12:28 UTC 2015 - jreidinger@suse.com

- support custom names for raids (bnc#944041)
- 3.1.151

-------------------------------------------------------------------
Tue Sep 15 12:05:28 UTC 2015 - jreidinger@suse.com

- make default distributor value empty to use default one in grub2
  (bnc#942519)
- remove distributor entry from ui. Support only changes in text
  file
- 3.1.150

-------------------------------------------------------------------
Tue Sep 15 12:04:28 UTC 2015 - jreidinger@suse.com

- fix typo when invalid architecture is used (bnc#945764)
- Do not propose bootloader stage1 location for grub2 on EFI
  (bnc#945764)
- 3.1.149

-------------------------------------------------------------------
Fri Sep 11 16:46:11 UTC 2015 - ancor@suse.com

- Empty kernel command lines are now properly written (bnc#945479)
- 3.1.148

-------------------------------------------------------------------
Thu Sep 10 14:45:51 CEST 2015 - schubi@suse.de

- AutoYaST configuration: Initialize libstorage and do not regard
  the installed system.
  (bnc#942360)
- 3.1.147

-------------------------------------------------------------------
Fri Sep  4 15:17:27 CEST 2015 - snwint@suse.de

- ensure device map has really been proposed (bsc#943749)
- when we switch to custom boot, turn off the other boot locations
  (bsc#943749)
- 3.1.146

-------------------------------------------------------------------
Thu Aug 27 13:21:25 UTC 2015 - jreidinger@suse.com

- use extended partition to boot even for non software raids
  (bnc#940765)
- for separate boot partition with btrfs prefer MBR bootloader
  location (bnc#940797)
- 3.1.145

-------------------------------------------------------------------
Tue Aug 25 07:31:56 UTC 2015 - igonzalezsosa@suse.com

- Add support for kernel parameter with multiple values
  (bsc#882082)
- 3.1.144

-------------------------------------------------------------------
Mon Aug 24 12:44:51 UTC 2015 - jreidinger@suse.com

- fix removing password protection (bnc#942867)
- 3.1.143

-------------------------------------------------------------------
Wed Aug 19 12:42:41 UTC 2015 - jreidinger@suse.com

- do not require parted on target system (bnc#937066)
- 3.1.142

-------------------------------------------------------------------
Mon Aug 17 07:44:21 UTC 2015 - jreidinger@suse.com

- avoid bootloader module stuck caused by parted prompt
  (bnc#941510)
- 3.1.141

-------------------------------------------------------------------
Fri Aug 14 15:17:16 CEST 2015 - snwint@suse.de

- as SCR hasn't been setup yet, use some trickery to read boot config (bsc #940486)
- 3.1.140

-------------------------------------------------------------------
Wed Aug  5 11:37:12 UTC 2015 - jsrain@suse.cz

- always run mkinitrd at the end of S/390 installation (bsc#933177)
- 3.1.139

-------------------------------------------------------------------
Thu Jul  9 08:54:10 UTC 2015 - jreidinger@suse.com

- fix crash when aborting during initial screen (bnc#910343)
- 3.1.138

-------------------------------------------------------------------
Tue Jul  7 12:20:21 UTC 2015 - jreidinger@suse.com

- skip MBR update on s390 (bnc#937015)
- 3.1.137

-------------------------------------------------------------------
Mon Jun 29 12:46:58 UTC 2015 - jreidinger@suse.com

- set only proper boot flags ("boot" for DOS partition table and
  legacy_boot for GPT partition table), otherwise it can confuse
  some firmware and cause booting problems (bnc#930903)
- 3.1.136

-------------------------------------------------------------------
Mon Jun 22 11:01:16 UTC 2015 - jreidinger@suse.com

- Let password protection be configurable between a restricted mode
  (cannot boot at all without password, default GRUB2 behavior)
  and an unrestricted mode (can boot but cannot edit entries, GRUB1
  behavior) (FATE#318574).
- 3.1.135

-------------------------------------------------------------------
Tue Jun 16 15:13:10 UTC 2015 - jreidinger@suse.com

- Stop adding 'Failsafe' entry to bootloader menu unless user
  manually add it (fate#317016)
- 3.1.134

-------------------------------------------------------------------
Wed Jun  3 14:42:59 UTC 2015 - jreidinger@suse.com

- do not crash in offline update in bootloader proposal(bnc#931021)
- 3.1.133

-------------------------------------------------------------------
Wed Jun  3 12:37:08 UTC 2015 - jreidinger@suse.com

- Fix cleaning of tmp file for init bootloader (bnc#926843)
- 3.1.132

-------------------------------------------------------------------
Wed Jun  3 11:44:23 UTC 2015 - jreidinger@suse.com

- Fix ignoring bootloader settings after changing them in proposal
  screen (bnc#925987)
- 3.1.131

-------------------------------------------------------------------
Tue Jun  2 12:40:05 UTC 2015 - jreidinger@suse.com

- Do not crash if system contain unpartitioned disk (bnc#930091)
- allow negative timeout to cancel automatic boot (bnc#812618)
- fix typo in help text (bnc#702664)
- 3.1.130

-------------------------------------------------------------------
Mon Jun  1 14:20:30 UTC 2015 - jreidinger@suse.com

- Don't crash when reconfiguring from grub1 to grub2 (bnc#923458)
- 3.1.129

-------------------------------------------------------------------
Wed May 20 13:35:23 CEST 2015 - dvaleev@suse.com

- Disable os-prober for Power boo#931653
- 3.1.128
-------------------------------------------------------------------
Tue Apr 14 14:50:43 CEST 2015 - schubi@suse.de

- While calling AutoYaST clone_system libStorage has to be set
  to "normal" mode in order to read mountpoints correctly.
- 3.1.127

-------------------------------------------------------------------
Thu Apr  9 13:15:02 UTC 2015 - jreidinger@suse.com

- fix abort when importing bootloader values in autoyast
  (bnc#914812)
- 3.1.126

-------------------------------------------------------------------
Wed Mar 25 08:15:01 UTC 2015 - schwab@suse.de

- Propose secure_boot by default only on x86, aarch64 is not ready yet
- 3.1.125

-------------------------------------------------------------------
Wed Feb 25 21:48:10 UTC 2015 - jreidinger@suse.com

- Fixed creation of a multipath device map
- 3.1.124

-------------------------------------------------------------------
Wed Feb 18 16:22:05 UTC 2015 - jreidinger@suse.com

- fix crash on ppc(bnc#917833)
- 3.1.123

-------------------------------------------------------------------
Tue Feb 17 13:24:26 UTC 2015 - jreidinger@suse.com

- reset flags before set new ones(bnc#848609)
- 3.1.122

-------------------------------------------------------------------
Mon Feb 16 13:57:27 UTC 2015 - jreidinger@suse.com

- ensure that there is only limited amount of disks in device map
  (bnc#917640)
- 3.1.121

-------------------------------------------------------------------
Thu Feb 12 12:45:50 UTC 2015 - jreidinger@suse.com

- fix redundancy boot proposal if there are more devices
  (bnc#917025)
- 3.1.120

-------------------------------------------------------------------
Tue Feb 10 15:24:53 UTC 2015 - ancor@suse.com

- Fixed detection for encrypted partitions (bnc#913540)
- 3.1.119

-------------------------------------------------------------------
Fri Feb  6 12:46:48 UTC 2015 - ancor@suse.com

- The unit tests are now compatible with RSpec 3 (bnc#916364)
- 3.1.118

-------------------------------------------------------------------
Wed Feb  4 13:56:13 UTC 2015 - jsrain@suse.cz

- initialize bootloader during update if proposed from scratch
  (bnc#899743)
- 3.1.117

-------------------------------------------------------------------
Tue Feb  3 15:08:09 UTC 2015 - schwab@suse.de

- Use ttyAMA instead of ttyS on aarch64
- 3.1.116

-------------------------------------------------------------------
Tue Jan 20 10:54:52 UTC 2015 - schwab@suse.de

- Use grub2-efi on aarch64
- 3.1.115

-------------------------------------------------------------------
Tue Jan 13 08:48:38 UTC 2015 - jreidinger@suse.com

- Do not crash with unsupported bootloader when resetting
  bootloader to repropose during update (bnc#912595)
- 3.1.113

-------------------------------------------------------------------
Thu Dec  4 09:47:42 UTC 2014 - jreidinger@suse.com

- remove X-KDE-Library from desktop file (bnc#899104)

-------------------------------------------------------------------
Tue Dec  2 14:52:29 UTC 2014 - jreidinger@suse.com

- fix crash when not using separate boot (found by openqa)
- 3.1.112

-------------------------------------------------------------------
Fri Nov 21 11:56:38 UTC 2014 - jsrain@suse.cz

- detect EFI directly from sysfs during live installation
  (bnc#829256)

-------------------------------------------------------------------
Tue Nov 18 12:12:59 UTC 2014 - jreidinger@suse.com

- run password encryption always locally to ensure that
  grub2-mkpasswd is there (bnc#900039)
- 3.1.111

-------------------------------------------------------------------
Tue Nov 11 08:43:27 UTC 2014 - jreidinger@suse.com

- properly align checkboxes and improve spacing (bnc#900023)
- 3.1.110

-------------------------------------------------------------------
Fri Oct 31 06:36:13 UTC 2014 - jreidinger@suse.com

- do not show useless widgets when user decided to not install
  bootloader (bnc#901060)
- 3.1.109

-------------------------------------------------------------------
Wed Oct 29 14:13:52 UTC 2014 - jreidinger@suse.com

- do not return /dev/null if cannot detect bootloader devices as it
  cause errors later

-------------------------------------------------------------------
Wed Oct 29 13:18:10 UTC 2014 - jreidinger@suse.com

- do not show warning if boot from extended partition (bnc#898023)
- 3.1.108

-------------------------------------------------------------------
Wed Oct 29 07:16:22 UTC 2014 - jreidinger@suse.com

- fix branding activation on live CD and also with kexec enabled
  (bnc#897847)
- 3.1.107

-------------------------------------------------------------------
Fri Oct 24 14:30:20 UTC 2014 - jreidinger@suse.com

- fix crash during installation if kernel parameter is not
  pre-proposed (bnc#902397)
- 3.1.106

-------------------------------------------------------------------
Wed Oct 15 11:50:20 UTC 2014 - jreidinger@suse.com

- improve usability of device map editor (bnc#900807)
- 3.1.105

-------------------------------------------------------------------
Wed Oct 15 09:43:11 UTC 2014 - jreidinger@suse.com

- ensure branding is used also during common install (bnc#901003)
- 3.1.104

-------------------------------------------------------------------
Wed Oct 15 08:54:35 UTC 2014 - jreidinger@suse.com

- fix missing widgets log entries(bnc#889169)
- 3.1.103

-------------------------------------------------------------------
Wed Oct 15 08:02:24 UTC 2014 - jreidinger@suse.com

- do not refer to info page of grub1 (bnc#878796)
- fixed an Internal Error when using password for grub2 with
  non-english locale (bnc#900358)
- 3.1.102

-------------------------------------------------------------------
Tue Oct  7 09:08:07 UTC 2014 - jreidinger@suse.com

- keep user selection for password (bnc#900026)
- fix build on ppc
- 3.1.101

-------------------------------------------------------------------
Tue Sep 30 09:30:52 UTC 2014 - jreidinger@suse.com

- use short product name to avoid truncated text on small
  resolution (bnc#873675)
- Avoid crash in clone_system on s390 (bnc#897399)
- propose missing attributes also during automatic upgrade which
  propose grub2 configuratin (bnc#897058)
- 3.1.100

-------------------------------------------------------------------
Tue Sep 30 09:15:52 UTC 2014 - jreidinger@suse.com

- move boot record backup functionality to own class to make code
  easier to understand and better tested
- 3.1.99

-------------------------------------------------------------------
Mon Sep 29 07:42:06 UTC 2014 - jreidinger@suse.com

- fix crash in lib_iface caused by typo (found by openQA and
  bnc#898878)
- fix crash when using tmpfs
- fix crash when device have explicit mount by device name
- 3.1.98

-------------------------------------------------------------------
Thu Sep 18 07:28:13 UTC 2014 - jreidinger@suse.com

- move udev mapping functionality to own class to make code easier
  to understand and better tested
- 3.1.97

-------------------------------------------------------------------
Wed Sep 17 07:42:12 UTC 2014 - jreidinger@suse.com

- pass vga mode if specified during installation
  (bnc#896300,bnc#891060)

-------------------------------------------------------------------
Mon Sep 15 14:18:20 UTC 2014 - jreidinger@suse.com

- Fix API to remove or add kernel parameter for bootloader
  (bnc#894603)

-------------------------------------------------------------------
Tue Sep  9 15:38:15 UTC 2014 - jreidinger@suse.com

- cleaning of section related code because we no longer support
  any bootloader which allows direct write of sections

-------------------------------------------------------------------
Mon Sep  8 14:03:36 UTC 2014 - jreidinger@suse.com

- switch build tool from autotools to rake
- 3.1.96

-------------------------------------------------------------------
Mon Sep  8 13:26:45 UTC 2014 - jreidinger@suse.com

- Drop remaining support for GRUB1 (fate#317700)
- 3.1.95

-------------------------------------------------------------------
Mon Sep  8 07:56:29 UTC 2014 - jreidinger@suse.com

- Avoid configuration where to MBR we want grub2 and also
  generic_mbr which can lead to unbootable configuration
  (bnc#893626)
- 3.1.94

-------------------------------------------------------------------
Thu Sep  4 12:04:09 UTC 2014 - mvidner@suse.com

- Use a more flexible rubygem requirement syntax (bnc#895069)
- 3.1.93

-------------------------------------------------------------------
Thu Sep  4 07:49:57 UTC 2014 - jreidinger@suse.com

- Do not overwrite bios_boot partition flag by boot flag leading
  to error in writing boot code (Bnc#894040)
- 3.1.92

-------------------------------------------------------------------
Wed Aug 27 07:53:45 UTC 2014 - jreidinger@suse.com

- do not reset secure boot to false at the end of installation in
  case of incapable device (bnc#892032)
- 3.1.91

-------------------------------------------------------------------
Tue Aug 26 11:37:17 UTC 2014 - jreidinger@suse.com

- fix partition activation on LVM (bnc#893449)
- fix activation device when md raid devices do not have
  recognizable bios id
- 3.1.90

-------------------------------------------------------------------
Fri Aug 15 12:27:58 CEST 2014 - snwint@suse.de

- remove nonsense check (bnc #768538)
- 3.1.89

-------------------------------------------------------------------
Fri Aug 15 10:15:49 UTC 2014 - jreidinger@suse.com

- read properly secure boot status when used from other modules
  like yast2-vm, so it adds new entry as secure boot (bnc#892032)
- 3.1.88

-------------------------------------------------------------------
Thu Aug 14 13:11:29 CEST 2014 - schubi@suse.de

- AutoYaST clone_system: Not using "next" in a ruby "reduce" call.
  (bnc#891079)
- 3.1.87

-------------------------------------------------------------------
Tue Aug 12 13:46:17 UTC 2014 - jreidinger@suse.com

- Fixed adding a crashkernel parameter to xen_append if the latter
  is missing. kdump.service would fail then (bnc#886843)
- 3.1.86

-------------------------------------------------------------------
Fri Aug  8 13:55:23 UTC 2014 - jreidinger@suse.com

- do not crash in some condition in combination of LVM and GPT
  (bnc#891070)
- 3.1.85

-------------------------------------------------------------------
Thu Aug  7 13:39:09 UTC 2014 - jreidinger@suse.com

- fix assigning priority disks to device map for LVM (bnc#890364)
- 3.1.84

-------------------------------------------------------------------
Thu Aug  7 08:32:39 UTC 2014 - jreidinger@suse.com

- workaround initrd recreation if some packages forgot during
  upgrade (bnc#889616)
- 3.1.83

-------------------------------------------------------------------
Wed Aug  6 08:59:52 UTC 2014 - jreidinger@suse.com

- ignore unknown priority device to avoid problems in corner case
  scenarios (bnc#890364)
- 3.1.82

-------------------------------------------------------------------
Tue Aug  5 09:17:20 UTC 2014 - jreidinger@suse.com

- fix assigning priority disks to device map for md raid
  (bnc#890246)
- fix choosing priority device causing bootloader crash
  (bnc#890204)
- 3.1.81

-------------------------------------------------------------------
Fri Aug  1 07:37:50 UTC 2014 - jsrain@suse.cz

- fixed bootloader installation (bnc#889770)
- 3.1.80

-------------------------------------------------------------------
Thu Jul 31 14:01:43 UTC 2014 - jreidinger@suse.com

- Disk order dialog:
  - fix non-working up button (bnc#885867)
  - fix enabling/disabling up/down buttons in various situations
  - when adding new device set focus to input field to better UX
- 3.1.79

-------------------------------------------------------------------
Thu Jul 31 12:40:37 UTC 2014 - jreidinger@suse.com

- reinit branding in upgrade of SLE-12 as it is overwritten
  (bnc#879686)
- 3.1.78

-------------------------------------------------------------------
Thu Jul 31 06:48:59 UTC 2014 - jreidinger@suse.com

- fix crash in bootloader caused by wrong device in device map
  (bnc#889670)
- 3.1.77

-------------------------------------------------------------------
Wed Jul 30 14:03:18 CEST 2014 - schubi@suse.de

- Fixed error popup for unsupported bootloader in autoyast.
  (bnc#889538)
- 3.1.76

-------------------------------------------------------------------
Wed Jul 30 08:20:59 UTC 2014 - ancor@suse.com

- Added a missing call to i18n for a string (bnc#887553)
- 3.1.75

-------------------------------------------------------------------
Wed Jul 30 06:30:40 UTC 2014 - jreidinger@suse.com

- Fix crash if during proposal some device map value is nil
  ( found by openQA )
- 3.1.74

-------------------------------------------------------------------
Tue Jul 29 09:23:34 UTC 2014 - jreidinger@suse.com

- Always use device with /boot as first device in device map to
  avoid problems with other MBRs (bnc#887808, bnc#880439)
- 3.1.73

-------------------------------------------------------------------

Mon Jul 28 07:18:47 UTC 2014 - jreidinger@suse.com

- fix proposing disabledos prober on certain products (SLES is
  affected) (bnc#884007)
- 3.1.72

-------------------------------------------------------------------
Mon Jul 28 09:14:18 CEST 2014 - snwint@suse.de

- enable secure boot by default (bnc #879486)
- 3.1.71

-------------------------------------------------------------------
Fri Jul 25 16:11:37 UTC 2014 - jreidinger@suse.com

- allow change of bootloader proposal during upgrade (bnc#887015)
- 3.1.70

-------------------------------------------------------------------
Fri Jul 25 11:48:35 UTC 2014 - jsrain@suse.cz

- code de-duplication of recent AUtoYaST fixes (bnc#885634)
- 3.1.69

-------------------------------------------------------------------
Tue Jul 22 09:00:56 UTC 2014 - jsrain@suse.cz

- initialize bootloader location configuration on AutoYaST ugprade
  (bnc#885634)
- 3.1.68

-------------------------------------------------------------------
Wed Jul 16 11:46:38 UTC 2014 - jsrain@suse.cz

- don't check dedicated /boot/zipl partition on upgrade
  (bnc#886604)
- 3.1.67

-------------------------------------------------------------------
Fri Jul 11 08:17:54 UTC 2014 - jreidinger@suse.com

- fix writing sysconfig for grub1 (bnc#885634)
- 3.1.66

-------------------------------------------------------------------
Fri Jul 11 07:11:41 UTC 2014 - mchang@suse.com

- fix secure boot widget did not function from installed system
  because bootloader not get re-installed (bnc#882124)
- 3.1.65

-------------------------------------------------------------------
Wed Jul  9 09:49:21 UTC 2014 - jreidinger@suse.com

- add check for combination of MBR, GPT, btrfs and missing
  bios_grub partitition (bnc#886143)
- 3.1.64

-------------------------------------------------------------------
Tue Jul  8 11:08:06 UTC 2014 - jreidinger@suse.com

- warn user if no location chosen for stage 1 (bnc#885208)
- 3.1.63

-------------------------------------------------------------------
Mon Jul  7 13:33:19 UTC 2014 - jreidinger@suse.com

- use only simple device map on s390 (bnc#884798, bnc#885984)
- 3.1.62

-------------------------------------------------------------------
Thu Jul  3 07:33:51 UTC 2014 - jreidinger@suse.com

- add perl-Bootloader-YAML to needed packages (BNC#885496)
- 3.1.61

-------------------------------------------------------------------
Fri Jun 27 13:31:01 UTC 2014 - jreidinger@suse.com

- do not allow to install to partition with xfs otherwise fs can be
  broken due to missing reserved space in xfs(bnc#884255)
- 3.1.60

-------------------------------------------------------------------
Fri Jun 27 12:27:05 UTC 2014 - jreidinger@suse.com

- properly install needed packages in autoinstallation
- 3.1.59

-------------------------------------------------------------------
Thu Jun 26 10:50:28 UTC 2014 - jreidinger@suse.com

- add help and translation for grub2 distributor description and
  other small localization improvements (bnc#884344)
- fix crash during propose of EFI during upgrade (bnc#884397)
- 3.1.58

-------------------------------------------------------------------
Tue Jun 24 15:10:21 UTC 2014 - jreidinger@suse.com

- respect product default configuration for os-prober enablement
  (bnc#884007)
- 3.1.57

-------------------------------------------------------------------
Wed Jun 18 14:25:19 CEST 2014 - schubi@suse.de

- Initialize variable correctly for supported bootloaders
  (bnc#883040)
- 3.1.56

-------------------------------------------------------------------
Mon Jun 16 09:22:43 UTC 2014 - jreidinger@suse.com

- Allow in autoyast only supported bootloaders (bnc#882210)
- 3.1.55

-------------------------------------------------------------------
Fri Jun 13 12:03:40 UTC 2014 - jreidinger@suse.com

- fix crash with invalid partition to activate (bnc#882592)
- 3.1.54

-------------------------------------------------------------------
Fri Jun 13 11:46:09 UTC 2014 - jsrain@suse.cz

- don't prevent installation because of BIOS IDs not detected if
  disks order reviewed by user (bnc#880439)
- 3.1.53

-------------------------------------------------------------------
Wed Jun 11 14:24:22 UTC 2014 - jreidinger@suse.com

- do not crash in autoyast (bnc#882210)
- 3.1.52

-------------------------------------------------------------------
Mon Jun  9 08:32:44 UTC 2014 - jreidinger@suse.com

- Fix reinstallation of secure boot stage 1 (bnc#875235)
- 3.1.51

-------------------------------------------------------------------
Thu Jun  5 11:00:35 UTC 2014 - jsrain@suse.cz

- adjusted wording if disk order could not be detected (bnc#880439)
- 3.1.50

-------------------------------------------------------------------
Wed Jun  4 09:10:42 UTC 2014 - jreidinger@suse.com

- remove translation of section as it is generated in GRUB2 and
  never work reliably fro GRUB1 (bnc#875819)
- 3.1.49

-------------------------------------------------------------------
Mon Jun  3 18:13:05 UTC 2014 - dvaleev@suse.com

- Setting boot flag on GPT PReP resets prep flag which leads to
   grub2-install unable to install a bootloader (bnc#880094)
- 3.1.48

-------------------------------------------------------------------
Mon Jun  2 09:07:14 UTC 2014 - jreidinger@suse.com

-  fix typo causing crash when writing pmbr flag (bnc#880893)
- 3.1.47

-------------------------------------------------------------------
Thu May 29 13:47:40 UTC 2014 - jreidinger@suse.com

- Fix crash in upgrade from SLE11
- 3.1.46

-------------------------------------------------------------------
Wed May 28 14:19:36 UTC 2014 - jreidinger@suse.com

- Remove check for iscsi boot partition (bnc#880328)
- 3.1.45

-------------------------------------------------------------------
Wed May 28 13:23:19 UTC 2014 - jreidinger@suse.com

- fix crash in summary page of installation for grub2 (bnc#880324)
- 3.1.44

-------------------------------------------------------------------
Tue May 27 11:43:45 UTC 2014 - jreidinger@suse.com

- fix crash in summary page of installation
- 3.1.43

-------------------------------------------------------------------
Tue May 27 11:06:47 UTC 2014 - mchang@suse.com

- reinstall bootloader if the settings requires it
- 3.1.42

-------------------------------------------------------------------
Tue May 27 07:48:09 UTC 2014 - jreidinger@suse.com

- Fix detection if bootloader installation failed (bnc#879883)
- 3.1.41

-------------------------------------------------------------------
Mon May 26 15:31:16 UTC 2014 - jreidinger@suse.com

- add support to set Protective MBR and use reasonable proposal
  (bnc#872054)
- 3.1.40

-------------------------------------------------------------------
Fri May 23 14:32:07 UTC 2014 - jreidinger@suse.com

- Installation Summary: do not allow change location for grub2
  on ppc and s390 (bnc#879107)
- 3.1.39

-------------------------------------------------------------------
Thu May 22 13:06:25 UTC 2014 - jreidinger@suse.com

- Report if grub2-install failed so user see quickly, that he
  cannot boot(bnc#878664)
- 3.1.38

-------------------------------------------------------------------
Fri May 16 17:10:26 CEST 2014 - snwint@suse.de

- get rid of grub in loader type selection
- 3.1.37

-------------------------------------------------------------------
Fri May 16 13:44:48 UTC 2014 - jreidinger@suse.com

- fix progress report to not show 100% and waiting to write
  bootloader (bnc#878007)
- 3.1.36

-------------------------------------------------------------------
Wed May 14 09:22:15 UTC 2014 - jreidinger@suse.com

- add new API call to work nice with grub2 kernel parameter
  configuration (bnc#869608)
- 3.1.35

-------------------------------------------------------------------
Mon May 12 12:35:51 UTC 2014 - jreidinger@suse.com

- extended sysconfig options only for grub1 to prevent confusion
  (bnc#870890)
- 3.1.34

-------------------------------------------------------------------
Tue May  6 11:20:06 UTC 2014 - jreidinger@suse.com

- reinit perl-bootloader library in update mode to force write
  configuration (bnc#876359,876355)
- 3.1.33

-------------------------------------------------------------------
Fri May  2 08:31:32 UTC 2014 - jreidinger@suse.com

- fix activating partitions with number bigger then 4 on GPT disks
  with legacy x86 boot (bnc#875757)
- 3.1.32

-------------------------------------------------------------------
Wed Apr 30 16:23:57 UTC 2014 - jreidinger@suse.com

- handle diskless nfs setup for ppc (bnc#874466)
- 3.1.31

-------------------------------------------------------------------
Tue Apr 29 19:47:03 UTC 2014 - jreidinger@suse.com

- fix reading of previous bootloader (bnc#874646)
- 3.1.30

-------------------------------------------------------------------
Tue Apr 22 08:44:57 UTC 2014 - jreidinger@suse.com

- Use correct check for partition setup for grub2 on s390
  (bnc#873951)
- 3.1.29

-------------------------------------------------------------------
Thu Apr 17 14:46:17 UTC 2014 - jreidinger@suse.com

- do not complain for missing bios order on s390(bnc#874106)
- 3.1.28

-------------------------------------------------------------------
Thu Apr 17 11:18:31 UTC 2014 - jreidinger@suse.com

- improve logging if setting kernel paramater failed to help with
  bnc#873996
- remove graphic adapter configuration on s390 (bnc#874010)
- 3.1.27

-------------------------------------------------------------------
Wed Apr 16 19:49:56 UTC 2014 - jreidinger@suse.com

- allow switching to grub2 also on ppc
- Do not raise exception for grub2efi on non-pc architectures
  (bnc#873861)
- 3.1.26

-------------------------------------------------------------------
Wed Apr 16 12:11:53 UTC 2014 - jreidinger@suse.com

- fix crash on s390 due to missing loader widget(bnc#873911)
- 3.1.25

-------------------------------------------------------------------
Tue Apr 15 10:52:27 UTC 2014 - jreidinger@suse.com

- fix proposing when proposal do not change (bnc#873620)
- 3.1.24

-------------------------------------------------------------------
Tue Apr 15 10:38:17 UTC 2014 - jreidinger@suse.com

- cleaning up deprecated code to improve stability and maintenance
  of code
- 3.1.23

-------------------------------------------------------------------
Tue Apr 15 08:33:29 UTC 2014 - mchang@suse.com

- remove error if boot directory on xfs file system (bnc#864370)
- 3.1.22

-------------------------------------------------------------------
Thu Apr 10 11:18:51 UTC 2014 - jreidinger@suse.com

- drop not-supported bootloaders except grub1
- 3.1.21

-------------------------------------------------------------------
Tue Apr  8 11:27:42 UTC 2014 - jreidinger@suse.com

- modify proposal to work also during upgrade and propose upgrade
  to grub2 (bnc#872081)
- 3.1.20

-------------------------------------------------------------------
Mon Apr  7 14:57:38 UTC 2014 - jreidinger@suse.com

- return back installation details for tweaking device map
  (bnc#872300)
- 3.1.19

-------------------------------------------------------------------
Fri Apr  4 13:05:55 CEST 2014 - snwint@suse.de

- install mokutil along with shim (bnc #808852)
- fix regular expessions (ported from bnc #743805)
- 3.1.18

-------------------------------------------------------------------
Wed Apr  2 11:26:23 UTC 2014 - jreidinger@suse.com

- fix crash on s390 (bnc#871597)
- 3.1.17

-------------------------------------------------------------------
Wed Apr  2 06:57:01 UTC 2014 - jreidinger@suse.com

- fix autoyast location proposal (bnc#869083)
- 3.1.16

-------------------------------------------------------------------
Wed Apr  2 08:36:41 CEST 2014 - snwint@suse.de

- don't question device mapping passed to us explicitly by autoyast
  (bnc #717978, bnc #870494)

-------------------------------------------------------------------
Fri Mar 28 10:17:07 UTC 2014 - jreidinger@suse.com

- improve support grub2 on non-pc architectures 
  (bnc#866912,bnc#868909)
- 3.1.15

-------------------------------------------------------------------
Fri Mar 28 04:03:54 UTC 2014 - mchang@suse.com

- fix wrong console regexp match (bnc#870514)
- 3.1.14

-------------------------------------------------------------------
Fri Mar 21 10:10:45 CET 2014 - snwint@suse.de

- fix minor typo (bnc #869324)

-------------------------------------------------------------------
Wed Mar 12 09:15:33 UTC 2014 - mchang@suse.com

- fix grub2-*-efi package not installed (bnc#867380) 
- 3.1.13

-------------------------------------------------------------------
Mon Mar 10 12:07:17 UTC 2014 - jreidinger@suse.com

- do not crash if there is no swap partition (bnc#867435)
- 3.1.12

-------------------------------------------------------------------
Mon Mar 10 08:30:40 UTC 2014 - mchang@suse.com

- fix some serial console issues (bnc#862388) (bnc#866710)
- 3.1.11

-------------------------------------------------------------------
Wed Mar  5 10:02:23 CET 2014 - snwint@suse.de

- always allow grub2 (bnc #866863)
- 3.1.10

-------------------------------------------------------------------
Tue Mar  4 16:27:11 CET 2014 - snwint@suse.de

- switch to grub2 on s390x
- support both grub2 & zipl
- drop grub & elilo support from x86
- 3.1.9

-------------------------------------------------------------------
Tue Mar  4 12:03:05 UTC 2014 - jreidinger@suse.com

- fix typo in proposal screen(bnc#866607)
- 3.1.8

-------------------------------------------------------------------
Mon Mar  3 10:06:19 UTC 2014 - jreidinger@suse.com

- fix permissions on file which contain encrypted password to be
  readable only by root(BNC#864544)(CVE#2013-4577)
- 3.1.7

-------------------------------------------------------------------
Thu Feb 27 08:32:24 UTC 2014 - jreidinger@suse.com

- Add support for password in GRUB2 (FATE#315404)
- restructure details dialog in GRUB2 to have better UX
- fix crash of GRUB2 module
- 3.1.6

-------------------------------------------------------------------
Wed Feb 12 10:18:39 UTC 2014 - jreidinger@suse.com

- rephrase bootloader proposal on summary screen (BNC#853058)
- 3.1.5

-------------------------------------------------------------------
Mon Feb 10 10:56:36 CET 2014 - snwint@suse.de

- don't ask to run yast.ssh in second stage as there's no second stage
  anymore (bnc 861537)

-------------------------------------------------------------------
Tue Jan 28 09:56:33 UTC 2014 - jreidinger@suse.com

- Fix examining MBR
- 3.1.4

-------------------------------------------------------------------
Tue Jan 14 10:37:06 UTC 2014 - jreidinger@suse.com

- handle problematic conversion of perl undef in perl-json
  (bnc#858461)
- fix "undefined method `split' for true:TrueClass" with grub2-efi
  (bnc#855568) ( thanks lpechacek )
- always use local parted. It allows to have target system without parted.
- 3.1.3

-------------------------------------------------------------------
Tue Nov  5 13:55:05 CET 2013 - locilka@suse.com

- Using 'Kernel' Yast library for handling modules loaded on boot
  (bnc#838185)
- 3.1.2

-------------------------------------------------------------------
Tue Nov  5 11:05:12 CET 2013 - snwint@suse.de

- use pbl-yaml script to communicate with perl-Bootloader
- 3.1.1

-------------------------------------------------------------------
Wed Sep 18 12:27:52 UTC 2013 - lslezak@suse.cz

- do not use *.spec.in template, use *.spec file with RPM macros
  instead
- 3.1.0

-------------------------------------------------------------------
Fri Aug 23 13:37:42 CEST 2013 - snwint@suse.de

- desktop files now also for s390
- 3.0.3

-------------------------------------------------------------------
Tue Aug  6 19:50:43 UTC 2013 - lslezak@suse.cz

- removed obsolete BuildRequires: yast2 and yast2-core
- 3.0.2

-------------------------------------------------------------------
Thu Aug  1 14:52:09 UTC 2013 - lslezak@suse.cz

- move the development documentation to devel-doc subpackage
- removed obsolete BuildRequires, not needed anymore:
  docbook-xsl-stylesheets doxygen gcc-c++ libxslt perl-Bootloader
  perl-gettext perl-XML-Writer sgml-skel swig update-alternatives
  libtool yast2-installation yast2-packager yast2-perl-bindings
  yast2-pkg-bindings yast2-storage yast2-testsuite
- 3.0.1

-------------------------------------------------------------------
Wed Jul 31 08:27:20 UTC 2013 - yast-devel@opensuse.org

- converted from YCP to Ruby by YCP Killer
  (https://github.com/yast/ycp-killer)
- version 3.0.0

-------------------------------------------------------------------
Fri Jun 14 11:55:44 CEST 2013 - snwint@suse.de

- remove limal reference
- 2.24.1

-------------------------------------------------------------------
Wed Mar  6 17:21:06 CET 2013 - snwint@suse.de

- set secureboot default to firmware status
- 2.23.12

-------------------------------------------------------------------
Mon Feb 25 16:33:16 CET 2013 - snwint@suse.de

- support uefi secureboot
- Propose grub2 theme path
- 2.23.11

-------------------------------------------------------------------
Mon Feb  4 15:05:47 CET 2013 - snwint@suse.de

- write gpt bootcode on gpt disks (fate #313880)
- fix initrd selection due to initrd-*-kdump in our new kernel packages
- take boot code from syslinux instead of master-boot-code package
- 2.23.10

-------------------------------------------------------------------
Mon Feb  4 13:42:36 CET 2013 - snwint@suse.de

- fix automake file
- 2.23.9

-------------------------------------------------------------------
Fri Jan 11 17:17:18 CET 2013 - snwint@suse.de

- jsuchome: /sbin/SuSEconfig call removed
- mchang: some bug fixing and improve grub2's summary
- 2.23.8

-------------------------------------------------------------------
Thu Aug 30 12:13:29 CEST 2012 - mchang@suse.com

- remove vga=ask
- add option to disable os-prober

-------------------------------------------------------------------
Fri Jul 13 15:40:46 CEST 2012 - mchang@suse.com

- support failsafe kernel parameters
- use product name in distributor
- rearrange widgets in dialog
- fix redundant kernel append
- 2.23.7

-------------------------------------------------------------------
Mon Jul  9 13:08:29 CEST 2012 - ug@suse.de

- fixed rnc schema file (bnc#752450)
- 2.23.6

-------------------------------------------------------------------
Wed Jul  4 09:44:00 CEST 2012 - mchang@suse.de

- set leagcy grub as default for xen pv guest
- use 'auto' for default gfxmode
- replace background with theme
- support editing GRUB_DISTRIBUTOR
- make vgamode widget wider
- 2.23.5

-------------------------------------------------------------------
Mon Jun  4 15:51:19 CEST 2012 - mchang@suse.com

- support console related global options gfxterm, serial, gfxbackground
  and gfxmode
- 2.23.4

-------------------------------------------------------------------
Tue Apr 24 15:06:19 CEST 2012 - snwint@suse.de

- don't do kexec on hyper-v (bnc#732693)
- 2.23.3

-------------------------------------------------------------------
Mon Apr 23 12:40:24 CEST 2012 - mchang@suse.com

- add "Boot Loader Options" dialog for grub2-efi that provides widgets for
  manipulating global options. These options include timeout, vgamode,
  append and default.
- add widgets for enabling serial console and specify it's arguments on
  "Boot Loader Options" dialog.
- add "Boot Loader Options" dialog for grub2 that provides widgets for
  manipulating global options. These options include activate, generic_mbr,
  timeout, vgamode, append and default.
- 2.23.2

-------------------------------------------------------------------
Mon Apr 23 11:35:06 CEST 2012 - snwint@suse.de

- adapted ssh command for 2nd stage ssh installation (bnc#745340)

-------------------------------------------------------------------
Thu Mar 22 10:56:28 UTC 2012 - mchang@suse.com

- add kernel parameters (detected necessary and user specfied one during
  installation) to grub2's config file (bnc#752939)
- 2.23.1

-------------------------------------------------------------------
Thu Mar 22 10:56:28 UTC 2012 - mchang@suse.com

- add new grub2-efi module to support booting on UEFI firmware.

-------------------------------------------------------------------
Wed Mar 14 15:43:44 CET 2012 - aschnell@suse.de

- adapted ssh command for 2nd stage ssh installation (bnc#745340)

-------------------------------------------------------------------
Mon Mar  5 14:42:10 CET 2012 - mchang@suse.com

- add basic grub2 support that only handles installs
- 2.23.0

-------------------------------------------------------------------
Fri Jan 13 11:31:51 CET 2012 - jsuchome@suse.cz

- added GfxMenu::Update to the client, so calling does not require
  package dependency (bnc#730391)
- 2.22.0

-------------------------------------------------------------------
Fri Nov 25 12:17:41 UTC 2011 - coolo@suse.com

- add libtool as buildrequire to avoid implicit dependency

-------------------------------------------------------------------
Fri Oct 21 15:34:43 CEST 2011 - snwint@suse.de

- yast2-storage uses fake uuids for btrfs handling; adjust our
  code (bnc #707450)
- 2.21.2

-------------------------------------------------------------------
Tue Oct 18 13:44:46 CEST 2011 - snwint@suse.de

- fix bootloader package handling (bnc #716404)
- 2.21.1

-------------------------------------------------------------------
Tue Oct  4 10:06:56 UTC 2011 - cfarrell@suse.com

- license update: GPL-2.0+
  SPDX format

-------------------------------------------------------------------
Mon Sep 26 12:54:57 CEST 2011 - visnov@suse.cz

- set dialog title
- 2.21.0

-------------------------------------------------------------------
Wed Sep 21 12:37:32 CEST 2011 - snwint@suse.de

- revert kernel-*-base change
- 2.20.5

-------------------------------------------------------------------
Wed Sep 21 11:55:12 CEST 2011 - snwint@suse.de

- enable resume for s390x (bnc #692606)
- kernel images are in kernel-*-base package
- 2.20.4

-------------------------------------------------------------------
Mon Sep 19 17:14:01 CEST 2011 - snwint@suse.de

- s390x: add hvc_iucv=8 to boot options (bnc #718089)
- 2.20.3

-------------------------------------------------------------------
Fri Sep 16 15:27:09 CEST 2011 - snwint@suse.de

- fix typo
- 2.20.2

-------------------------------------------------------------------
Fri Aug  5 12:30:54 CEST 2011 - tgoettlicher@suse.de

- fixed .desktop file (bnc #681249)

-------------------------------------------------------------------
Mon Mar 21 14:26:51 CET 2011 - jreidinger@suse.de

- fix detection of other linux partitions (BNC#675224)

-------------------------------------------------------------------
Tue Feb 22 11:30:20 UTC 2011 - jreidinger@novell.com

- during probe of partitions don't try to mount encrypted one
  (bnc#673906)
- 2.20.1

-------------------------------------------------------------------
Mon Jan 10 12:56:07 UTC 2011 - jreidinger@novell.com

- add missing file to tarball

-------------------------------------------------------------------
Thu Dec 30 08:52:36 UTC 2010 - jreidinger@novell.com

- allow to not specify vga mode for boot (bnc#643984)
- improve help text for menu section (bnc#621290)
- explicitelly  mention variables to compare to avoid problems with nil
  value (consider nil as false)
- number of partition can be integer so always convert it to string
- more explanation for warning messages with hint how to solve it
- 2.19.16

-------------------------------------------------------------------
Wed Jun  2 17:06:53 CEST 2010 - juhliarik@suse.cz

- added update of fix for (bnc#604401)
- 2.19.15

-------------------------------------------------------------------
Wed May 19 09:57:34 CEST 2010 - juhliarik@suse.cz

- added xen boot section as default during installation on 
  PV guest (bnc#604401)
- 2.19.14

-------------------------------------------------------------------
Thu May  6 13:15:18 CEST 2010 - juhliarik@suse.cz

- added patch for (bug#448883)
- 2.19.13

-------------------------------------------------------------------
Tue Apr 13 14:15:33 CEST 2010 - juhliarik@suse.cz

- added fix for troubles with using uuid names (bnc#594482)
- 2.19.12

-------------------------------------------------------------------
Thu Apr  8 15:55:40 CEST 2010 - juhliarik@suse.cz

- added patch for enable/disable SELinux (fate#309275)
- 2.19.11

-------------------------------------------------------------------
Wed Mar 31 12:09:27 CEST 2010 - juhliarik@suse.cz

- added fix for sending empty "boot_custom" (bnc#589433)
- 2.19.10

-------------------------------------------------------------------
Tue Mar 23 11:00:00 CET 2010 - juhliarik@suse.cz

- added fix for checking custom boot partition (bnc#588770)
- 2.19.9

-------------------------------------------------------------------
Tue Mar 16 17:35:52 CET 2010 - juhliarik@suse.cz

- added fix for adding XEN section on IA64 (bnc#588609)

-------------------------------------------------------------------
Tue Mar  9 16:17:10 CET 2010 - juhliarik@suse.cz

- added fix for using device map in autoyast profile (bnc#585824)
- 2.19.8

-------------------------------------------------------------------
Fri Feb 26 10:20:10 CET 2010 - juhliarik@suse.cz

- added fix for creating sysconfig directory file (bnc#583088)
- 2.19.7

-------------------------------------------------------------------
Mon Feb 22 12:10:48 CET 2010 - juhliarik@suse.cz

- added fix for detection of UEFI (bnc#581213)
- 2.19.6

-------------------------------------------------------------------
Thu Feb 11 16:16:12 CET 2010 - juhliarik@suse.cz

- added fix for calling mkinitrd if vga is "normal" (bnc#292013)
- 2.19.5

-------------------------------------------------------------------
Thu Feb 11 13:36:28 CET 2010 - juhliarik@suse.cz

- added fix for using persistent device names (bnc#533782)

-------------------------------------------------------------------
Thu Feb 11 12:13:19 CET 2010 - juhliarik@suse.cz

- added fix for using encrypted swap partition (bnc#577127)
- 2.19.4

-------------------------------------------------------------------
Thu Feb 11 10:55:21 CET 2010 - juhliarik@suse.cz

- added fix for detection of QEMU (bnc#571850)
- 2.19.3

-------------------------------------------------------------------
Wed Feb 10 13:49:32 CET 2010 - juhliarik@suse.cz

- added fix for adding crashkernel option to XEN kernel 
  (bnc#578545)

-------------------------------------------------------------------
Tue Feb  9 16:30:04 CET 2010 - juhliarik@suse.cz

- solved problem with wrtting to floppy (bnc#539774)

-------------------------------------------------------------------
Tue Feb  9 16:03:31 CET 2010 - juhliarik@suse.cz

- added fix for deleting Custom Boot Partition (bnc#544809)
- 2.19.2

-------------------------------------------------------------------
Thu Jan 28 16:08:30 CET 2010 - juhliarik@suse.cz

- added commnets for using options in /etc/sysconfig/bootloader
  (bnc#511319)
- 2.19.1

-------------------------------------------------------------------
Wed Jan 13 18:56:03 CET 2010 - kmachalkova@suse.cz

- Adjusted .desktop file(s) to wrap /sbin/yast2/ calls in xdg-su
  where root privileges are needed, removed X-KDE-SubstituteUID key 
  (bnc#540627)

-------------------------------------------------------------------
Tue Jan 12 13:07:25 CET 2010 - juhliarik@suse.cz

- added fix for data in device.map if MD RAID from Intel is used
  (bnc#568837) 
- 2.19.0

-------------------------------------------------------------------
Wed Dec  9 11:39:18 CET 2009 - juhliarik@suse.cz

- added patch for KMS (bnc#561566)

-------------------------------------------------------------------
Mon Dec  7 14:26:19 CET 2009 - juhliarik@suse.cz

- added fix for problem with characters in name (bnc#558542)

-------------------------------------------------------------------
Fri Dec  4 16:14:07 CET 2009 - juhliarik@suse.cz

- added fix for section name mismatch in lilo.conf for PPC
  (bnc#441051)

-------------------------------------------------------------------
Tue Oct 13 15:41:07 CEST 2009 - juhliarik@suse.cz

- deleted handling of luks_root and updating initrd for encrypted
  "/" (bnc#528474)
- 2.18.17

-------------------------------------------------------------------
Mon Sep 21 10:40:13 CEST 2009 - juhliarik@suse.cz

- added fix for missing persistent device names in mapping for
  perl-Bootloader (bnc#534905A)
- 2.18.16

-------------------------------------------------------------------
Thu Sep 17 12:43:53 CEST 2009 - juhliarik@suse.cz

- added fix for typy in help (bnc#532904)

-------------------------------------------------------------------
Fri Sep  4 17:50:39 CEST 2009 - juhliarik@suse.cz

- fixed type (bnc#535442)

-------------------------------------------------------------------
Thu Sep  3 13:27:09 CEST 2009 - juhliarik@suse.cz

- added fixed in help text convert "XEN" to "Xen" (bnc#532512)

-------------------------------------------------------------------
Thu Sep  3 13:10:07 CEST 2009 - juhliarik@suse.cz

- added fix for editing boot section (bnc#535739) 
- 2.18.15

-------------------------------------------------------------------
Thu Aug  6 10:31:03 CEST 2009 - juhliarik@suse.cz

- added support for enable SELinux (fate#305557)
- 2.18.14

-------------------------------------------------------------------
Tue Aug  4 16:52:57 CEST 2009 - juhliarik@suse.cz

- added support for redundancy md array (fate#305008)
- 2.18.13

-------------------------------------------------------------------
Fri Jul 31 11:55:40 CEST 2009 - aschnell@suse.de

- adapted to changes in yast2-storage
- 2.18.12

-------------------------------------------------------------------
Tue Jul 28 13:21:34 CEST 2009 - juhliarik@suse.cz

- added support for luks_root also to xen sections with kernel-xen

-------------------------------------------------------------------
Tue Jul 28 10:29:13 CEST 2009 - juhliarik@suse.cz

- reorganize UI widgets in GRUB global options

-------------------------------------------------------------------
Mon Jul 27 15:48:32 CEST 2009 - juhliarik@suse.cz

- added support for enable/disable acoustinc signals (fate#305403)
- 2.18.11

-------------------------------------------------------------------
Fri Jul 24 14:54:16 CEST 2009 - juhliarik@suse.cz

- added support for encrypted disk (fate#305633)
- 2.18.10

-------------------------------------------------------------------
Mon Jul 20 16:51:05 CEST 2009 - juhliarik@suse.cz

- added client bootloader_preupdate it takes care about calling 
  Storage::Update() (bnc#414490)
- added fix for using iscsi disk (bnc#393928)
- updated help text (bnc#511007)
- enabled change bootloader settings via one-click in installation
  summary (fate#303643)
- deleted warning message about using ext4
- updated proposal and using checkboxes Boot from Boot Partition
  and Boot from Extended Partition
- 2.18.9

-------------------------------------------------------------------
Mon Jun  8 10:37:27 CEST 2009 - jsrain@suse.cz

- do not add 'ide=nodma' to failsafe kernel parameter (bnc#510784)

-------------------------------------------------------------------
Mon May 25 16:23:55 CEST 2009 - jreidinger@suse.cz

- refactor Update code (update between products)

-------------------------------------------------------------------
Wed May 20 14:20:57 CEST 2009 - juhliarik@suse.cz

- fixed additional options for memory test section (bnc#396150)
- fixed problems with empty settings in autoyast profile for 
  memory test section (bnc#390659)
- fixed problem with custom (disable) gfxmenu option in autoyast
  profile (bnc#380509) 
- fixed deleting gfxmenu option if there is defined serial console
  (bnc#346576)
- added support check for ext4 (fate#305691)
- 2.18.8

-------------------------------------------------------------------
Mon May 18 17:45:52 CEST 2009 - juhliarik@suse.cz

- added fix for changing device map in y2-bootloader (bnc#497944)
- added warning message if there is not valid configuration for
  soft-raid (bnc#501043)

-------------------------------------------------------------------
Thu May  7 10:05:02 CEST 2009 - juhliarik@suse.cz

- added fix for checking soft-raid devices in device.map
  (bnc#494630)
- added fix for changing device map in y2-bootloader (bnc#497944)
- 2.18.7

-------------------------------------------------------------------
Tue Apr 28 16:48:12 CEST 2009 - juhliarik@suse.cz

- added updated patch from IBM and reipl (bnc#471522)

-------------------------------------------------------------------
Tue Apr 28 16:37:43 CEST 2009 - juhliarik@suse.cz

- disable checking thinkpad sequence in MBR also save content of 
  MBR (bnc#464485)

-------------------------------------------------------------------
Wed Apr 22 15:47:26 CEST 2009 - jreidinger@suse.cz

- code clean
- add interface for new perl-Bootloader MBR tools 
- add missing short-cuts for widgets

-------------------------------------------------------------------
Thu Apr 16 14:52:23 CEST 2009 - juhliarik@suse.cz

- added fix for commandline interface (bnc#479069)

-------------------------------------------------------------------
Wed Apr 15 11:31:40 CEST 2009 - juhliarik@suse.cz

- added back function setKernelParam (bnc#495048)
- 2.18.6

-------------------------------------------------------------------
Tue Apr 14 13:25:52 CEST 2009 - juhliarik@suse.cz

- updated timeout for ppc and elilo both to seconds
- 2.18.5

-------------------------------------------------------------------
Tue Apr 14 11:44:43 CEST 2009 - juhliarik@suse.cz

- added fix for troubles with analyse of MBR on soft riad 
  (bnc#483797)

-------------------------------------------------------------------
Fri Apr 10 15:18:33 CEST 2009 - juhliarik@suse.cz

- added fix for problem with special chars in menu.lst (bnc#456362)

-------------------------------------------------------------------
Fri Apr 10 14:15:02 CEST 2009 - juhliarik@suse.cz

- added fix for troubles with help in boot menu (bnc#384768)

-------------------------------------------------------------------
Tue Apr  7 15:50:12 CEST 2009 - juhliarik@suse.cz

- refactoring UI is done (fate#305268)
- fixed problem with providing vga modes list in grub(bnc#362517)
- fixed troubles with short input field for devices (bnc#396387)
- fixed problem with setup of password for grub 
  (bnc#407887,#433854,#450470)
- fixed problem with keyboard shortcuts (bnc#414989)
- setup for console in grub was rewritten (bnc#431515)
- 2.18.4

-------------------------------------------------------------------
Mon Feb 16 14:42:56 CET 2009 - juhliarik@suse.de

- added fix for problem with wrong init for storage library 
  (bnc#464090)
- updated fix for increase performance on huge machine (bnc#468922)
- added fix for checking GPT and using the 4th partition for 
  booting (bnc#474854)
- added quit booting "splash=silent quiet" (bnc#475194)
- updated change log for using convention (bnc#no,fate#no etc.)
- 2.18.3

-------------------------------------------------------------------
Mon Feb  9 15:42:12 CET 2009 - juhliarik@suse.de

- added fix for using buttons (bnc#440553)
- added fix for checking boot device on mac machines (bnc#343670)
- 2.18.2

-------------------------------------------------------------------
Wed Feb  4 14:50:21 CET 2009 - juhliarik@suse.cz

- added fix for problem with unnecessary popup mesage for writting
  bootloader to floppy (bnc#333459)
- added fix meesage about writting bootloader to floppy includes 
  "Cancel" button (bnc#433348)
- changed text about using XFS there is used "may not" insted of 
  "will not" (bug#449823)  
- updated help text
- 2.18.1

-------------------------------------------------------------------
Wed Feb  4 12:15:21 CET 2009 - juhliarik@suse.cz

- added fix for finding the smallest partition on pmac machine
  (bnc#459860)
- updated function Dev2MountByDev() which can run long time if
  machine included huge number of disks (bnc#468922)
- added fix for problem with adding boot entry to EFI if
  installation run on different disk but with same boot partition
  (bnc#450682)
- added fix for using translated text in bootloader e.g. Image,
  Other (bug#445999)
- 2.18.0

-------------------------------------------------------------------
Tue Jan 20 14:11:38 CET 2009 - juhliarik@suse.cz

- added fix for problem with calling parted each time when
  yast2-bootloader is called (bnc#461613,#357290)

-------------------------------------------------------------------
Thu Jan 15 15:28:38 CET 2009 - juhliarik@suse.cz

- added fix for problem with lines_cache_id == "" -it is cause of
  error output from perl-Bootloader (bnc#464098)

-------------------------------------------------------------------
Wed Jan 14 13:59:14 CET 2009 - juhliarik@suse.cz

- added fix for changing EFI label in running system (bnc#269198)
- added fix for problem with primary language in GRUB (bnc#447053)

-------------------------------------------------------------------
Thu Dec 11 17:43:40 CET 2008 - juhliarik@suse.cz

- added fix for problem with autoinstallation and powerlilo 
  (bnc#439674)
- added fix for (bnc#450506) root=kernelname
- added fix for problem with adding kernel to proposal (SLERT)
  (bnc#450153) 
- 2.17.46

-------------------------------------------------------------------
Mon Dec  8 15:41:43 CET 2008 - juhliarik@suse.cz

- added fix for problem with installation if boot device is NFS
  (bnc#440183)

-------------------------------------------------------------------
Sun Dec  7 14:45:22 CET 2008 - juhliarik@suse.cz

- deleted support of detail settings for trustedgrub because it is
  not supporeted by trustedgrub package

-------------------------------------------------------------------
Thu Dec  4 09:34:22 CET 2008 - juhliarik@suse.cz

- 2.17.45

-------------------------------------------------------------------
Tue Dec  2 16:28:27 CET 2008 - juhliarik@suse.cz

- added fix for onetime boot if default is windows (bnc#339024)

-------------------------------------------------------------------
Tue Dec  2 15:35:30 CET 2008 - juhliarik@suse.cz

- updated heuristic for adding other OS to menu.lst for GRUB 
  (bnc#448010)

-------------------------------------------------------------------
Mon Dec  1 16:07:54 CET 2008 - juhliarik@suse.cz

- added fix for proposal if MBR include Vista code and "/" is on
  logical partition (bnc#450137)
- added update of handling serial console (bnc#449726)
- 2.17.44

-------------------------------------------------------------------
Mon Dec  1 14:32:09 CET 2008 - juhliarik@suse.cz

- added fix for problem with multipath (bnc#448110)
- added fix for problem with cloning boot sections (bnc#450190)

-------------------------------------------------------------------
Thu Nov 27 18:55:11 CET 2008 - juhliarik@suse.cz

- added fix for problem with missing "console" (bnc#449726) 
- 2.17.43

-------------------------------------------------------------------
Thu Nov 27 16:46:21 CET 2008 - juhliarik@suse.cz

- deleted fix for (bnc#439674) - it fix problem with proposal of 
  globals on PPC (bnc#449747)
- 2.17.42

-------------------------------------------------------------------
Wed Nov 26 16:58:21 CET 2008 - juhliarik@suse.cz

- 2.17.41

-------------------------------------------------------------------
Wed Nov 26 13:26:21 CET 2008 - juhliarik@suse.cz

- added fix for problem with "boot" in lilo.conf (bnc#449062)

-------------------------------------------------------------------
Tue Nov 25 15:37:01 CET 2008 - juhliarik@suse.cz

- added fix for problem with changed default section (bnc#446555)

-------------------------------------------------------------------
Tue Nov 25 10:51:12 CET 2008 - jsrain@suse.cz

- write correct language list in /boot/message (bnc#447053)

-------------------------------------------------------------------
Tue Nov 25 10:05:30 CET 2008 - juhliarik@suse.cz

- added fix for recreating device map (bnc#438243)
- updated proposal if boot device is on logical partition 
  (bnc#279837#c53)

-------------------------------------------------------------------
Mon Nov 24 15:54:41 CET 2008 - juhliarik@suse.cz

- updated proposal of bootloader (bnc#279837#c53)
- added fix for recreating device map if storage change settings
  (bnc#438243)

-------------------------------------------------------------------
Fri Nov 21 12:11:27 CET 2008 - juhliarik@suse.cz

- updated fix for checking if boot entry exist in EFI (bnc#438215)
- 2.17.40

-------------------------------------------------------------------
Wed Nov 19 13:50:35 CET 2008 - juhliarik@suse.cz

- added fix for problem with writing default kernel args to 
  /etc/sysconfig/bootloader (bnc#440125) 
-2.17.39

-------------------------------------------------------------------
Wed Nov 12 12:26:47 CET 2008 - juhliarik@suse.cz

- deleted adding beep for booting (bnc#439328) 
- 2.17.38

-------------------------------------------------------------------
Wed Nov 12 10:55:10 CET 2008 - juhliarik@suse.cz

- added fix for problem with missing boot_* in globals (bnc#439674)

-------------------------------------------------------------------
Mon Nov 10 14:46:36 CET 2008 - juhliarik@suse.cz

- added fix for problem with disabled button for detail settings of
  trusted GRUB (bnc#442706)
- added calling function Pkg::SourceProvideFile() (bnc#409927)
- 2.17.37

-------------------------------------------------------------------
Fri Nov  7 10:29:26 CET 2008 - juhliarik@suse.cz

- added fix for writing crashkernel to bootloader from kdump on ppc
  (bnc#441547)
- added fix for double boot entry twice by efibootmgr (bnc#438215)
- added fix for using fix_chs (bnc#367304)
- 2.17.36

-------------------------------------------------------------------
Fri Oct 31 12:49:14 CET 2008 - juhliarik@suse.cz

- added better proposal checking elilo ,lilo
- added fix for typo (bnc#439030)
- added fix for selectinf "none" bootloader (bnc#438976)
- 2.17.35

-------------------------------------------------------------------
Mon Oct 27 12:45:44 CET 2008 - juhliarik@suse.cz

- updated checking of boot device s not on XFS (bnc#438757)
- added fix for problem with generic boot code (bnc#438752) 
- 2.17.34

-------------------------------------------------------------------
Mon Oct 27 10:39:37 CET 2008 - jsrain@suse.cz

- updated method of ThinkPad MBR detection
- 2.17.33

-------------------------------------------------------------------
Mon Oct 27 10:21:57 CET 2008 - juhliarik@suse.cz

- added fix for using persistent device name in lilo (bnc#437764)
- 2.17.32

-------------------------------------------------------------------
Fri Oct 24 14:25:23 CEST 2008 - juhliarik@suse.cz

- added fix for problem with converting lilo to grub during update
  system
- added fix - deleting read-only option for elilo (bnc#438276)

-------------------------------------------------------------------
Thu Oct 23 14:25:18 CEST 2008 - juhliarik@suse.cz

- added fix for broken titles in lilo (bnc#437693)

-------------------------------------------------------------------
Tue Oct 21 18:35:31 CEST 2008 - juhliarik@suse.cz

- update for bug with deleting boot section (bnc#436890)
- 2.17.31

-------------------------------------------------------------------
Tue Oct 21 12:01:31 CEST 2008 - juhliarik@suse.cz

- added fix for problem with deleting all boot section for elilo
  (bnc#436890)
- added fox for problem with XEN boot section in domU (bnc#436899)
- 2.17.30

-------------------------------------------------------------------
Fri Oct 17 14:58:02 CEST 2008 - juhliarik@suse.cz

- added fix for adding language to GRUB (bnc#429287)
- 2.17.29

-------------------------------------------------------------------
Thu Oct 16 15:24:21 CEST 2008 - juhliarik@suse.cz

- added fix for using autoyast profil from SLES9 (bnc#344659)

-------------------------------------------------------------------
Thu Oct 16 10:05:03 CEST 2008 - juhliarik@suse.cz

- added fix for handling mounpoints (bnc#431977)

-------------------------------------------------------------------
Wed Oct 15 12:51:29 CEST 2008 - juhliarik@suse.cz

- added fix to proposal with "/" on logical partition (bnc#259050)

-------------------------------------------------------------------
Wed Oct 15 12:21:51 CEST 2008 - jsrain@suse.cz

- handle multipath devices properly when creating device map
  (bnc#433092)
- 2.17.28

-------------------------------------------------------------------
Mon Oct 13 16:40:11 CEST 2008 - juhliarik@suse.cz

- added fix for translation labes for ELILO (bnc#151486)
- added fix for typo in help text (bnc#433424)
- added fix for problem with device names in live CD installation
  (bnc#432699) 
- 2.17.27

-------------------------------------------------------------------
Fri Oct 10 14:50:31 CEST 2008 - jsrain@suse.cz

- fixed bootloader proposal in mixed standalone disk and BIOS-RAID
  environments (bnc#433092)
- issue a warning if /boot directory is on XFS on x86 boot
  architecture (bnc#429042)

-------------------------------------------------------------------
Wed Oct  8 15:32:09 CEST 2008 - juhliarik@suse.cz

- added fix for handling nil from function InitializeBootloader()

-------------------------------------------------------------------
Wed Oct  8 10:39:12 CEST 2008 - juhliarik@suse.cz

- added fix for adding crashkernel from y2-kdump (bnc#432651)
- added fix for writing proposal (bnc#433344)
- added fix for checking if boot device is on raid0 (bnc#156800)
- 2.17.26

-------------------------------------------------------------------
Fri Oct  3 17:28:27 CEST 2008 - juhliarik@suse.cz

- added fix for installing packages (bnc#431580)
- added fix for 2 identical section in powerLILO (bnc#427730)
- added fix for mapping disk by label for powerLILO (bnc#41497)
- 2.17.25

-------------------------------------------------------------------
Tue Sep 30 13:37:44 CEST 2008 - juhliarik@suse.cz

- updated fix for converting LILO to GRUB (bnc#430579)
- 2.17.24

-------------------------------------------------------------------
Mon Sep 29 17:10:36 CEST 2008 - juhliarik@suse.cz

- added new dialog for updating from lilo to grub (bnc#430579)
- 2.17.23

-------------------------------------------------------------------
Mon Sep 29 15:45:41 CEST 2008 - jsrain@suse.cz

- fixed no scrren contents after changing loader type (bnc#427622)
- avoid mixing options of different bootloader after loaded type
  change

-------------------------------------------------------------------
Thu Sep 25 17:44:24 CEST 2008 - juhliarik@suse.cz

- added fix for problem with changed default name (bnc#169062)
- added fix for problem with editing custom boot  (bnc#395009)
- added fix for problem with timeout update (bnc#395851)
- 2.17.22

-------------------------------------------------------------------
Thu Sep 18 17:39:43 CEST 2008 - juhliarik@suse.cz

- added fix for initialise yast2-stroage (bnc#419197)
- help update (bnc#220283)
- 2.17.21

-------------------------------------------------------------------
Thu Sep 16 16:35:43 CEST 2008 - juhliarik@suse.cz

- added fix for deleting fake xen boot section (bnc#408346)
- added fix for failsafe options for kernel (bnc#419464)
- 2.17.20

-------------------------------------------------------------------
Thu Sep 16 16:35:43 CEST 2008 - juhliarik@suse.cz

- added fix for getDefaultSection() for zipl (bnc#364904)
- added fix for deleting gfxmenu from menu.lst (bnc#398806)
- 2.17.19

-------------------------------------------------------------------
Thu Sep 16 10:54:43 CEST 2008 - juhliarik@suse.cz

- added fix for problem with rnc file - syntax error (bnc#426522)
- 2.17.18

-------------------------------------------------------------------
Thu Sep 12 14:24:43 CEST 2008 - juhliarik@suse.cz

- added support of trusted grub (fate#303784), (fate#303672), 
  (fate#303891), (fate#303983)
- added warning that lilo is not supported (fate#305006)
- 2.17.17

-------------------------------------------------------------------
Thu Sep 11 15:27:43 CEST 2008 - locilka@suse.cz

- Calling new reipl_bootloader_finish client from yast2-reipl
  in bootloader_finish (fate#304960).
- 2.17.16

-------------------------------------------------------------------
Thu Sep 11 08:22:53 CEST 2008 - jsrain@suse.cz

- merged texts from proofread

-------------------------------------------------------------------
Wed Sep  3 12:00:58 CEST 2008 - jsrain@suse.cz

- added detection of EFI, proposing ELILO in that case 
 (fate#301882)
- 2.17.15

-------------------------------------------------------------------
Wed Aug 20 15:34:22 CEST 2008 - jsrain@suse.cz

- added skeleton for checking whether scenario is supported, not
  yet actually used (fate#304499)

-------------------------------------------------------------------
Mon Aug 18 12:34:35 CEST 2008 - jsrain@suse.cz

- store bootloader type before installing packages, fixed check
  for undefined product name (bnc#417383)
- 2.17.14

-------------------------------------------------------------------
Thu Aug 14 15:16:04 CEST 2008 - juhliarik@suse.cz

- added support for creating console for kernel args (fate#110038)
- 2.17.13

-------------------------------------------------------------------
Wed Aug 13 14:36:59 CEST 2008 - juhliarik@suse.cz

- added changes for pesistent device names (fate#302219)
- 2.17.12

-------------------------------------------------------------------
Wed Aug  6 15:42:28 CEST 2008 - juhliarik@suse.cz

- added better detection of NFS boot device (bnc#408912) 
- added better detection of EVMS - do not install bootloader 
  (fate#305007)
- 2.17.11

-------------------------------------------------------------------
Wed Aug  6 12:55:17 CEST 2008 - juhliarik@suse.cz

- added support for acoustic signals (fate#303481)
- added checkbox for enabling remapping in chainloader section
- 2.17.10

-------------------------------------------------------------------
Tue Aug  5 12:05:04 CEST 2008 - juhliarik@suse.cz

- added/enabled support for ordering disks in device.map for GRUB
  (fate#303964)
- 2.17.9

-------------------------------------------------------------------
Mon Aug  4 13:29:01 CEST 2008 - juhliarik@suse.cz

- added support for reducing devices from device.map to 8 devices
  (fate#303548)
- 2.17.8

-------------------------------------------------------------------
Thu Jul 31 10:27:42 CEST 2008 - juhliarik@suse.cz

- added support for remaping windows chainloader boot section
  (fate#301994)
- 2.17.7

-------------------------------------------------------------------
Tue Jul 29 18:18:38 CEST 2008 - juhliarik@suse.cz

- update solution for saving kernel args to 
  /etc/sysconfig/bootloader (fate#302245)
- 2.17.6

------------------------------------------------------------------
Sun Jul 27 17:52:58 CEST 2008 - juhliarik@suse.cz

- added powersaved=off to boot section for failsave (bnc#153345)

-------------------------------------------------------------------
Wed Jul 23 15:16:58 CEST 2008 - juhliarik@suse.cz

- added support for persistent device names (fate#302219)  
- 2.17.5

-------------------------------------------------------------------
Wed Jul 21 09:20:13 CEST 2008 - juhliarik@suse.cz

- 2.17.4

-------------------------------------------------------------------
Wed Jul 16 14:27:23 CEST 2008 - jsrain@suse.cz

- store kernel parameters to sysconfig during installation
  (fate#302245)

-------------------------------------------------------------------
Fri Jul 11 13:18:05 CEST 2008 - ug@suse.de

- rnc file fixed (bnc#407615)

-------------------------------------------------------------------
Thu Jul 10 17:29:00 CEST 2008 - juhliarik@suse.cz

- enable installing GRUB to XEN  (bnc#380982)
- 2.17.3

-------------------------------------------------------------------
Thu Jun 27 17:24:00 CEST 2008 - juhliarik@suse.cz

- correct labels for buttons  (bnc#398492)

-------------------------------------------------------------------
Thu Jun 26 17:24:00 CEST 2008 - juhliarik@suse.cz

- deleted support xenpae (bnc#400526)
- 2.17.2

-------------------------------------------------------------------
Thu Jun 26 16:51:00 CEST 2008 - juhliarik@suse.cz

- added support for better detection Vista in MBR
- added fix for installing generic code if MBR is uknown (bnc#400062)
- added fix for detection MBR if sw-raid is used (bnc#398356)
- 2.17.1

-------------------------------------------------------------------
Mon Jun  9 13:35:26 CEST 2008 - juhliarik@suse.cz

- added fix for problem with booting Vista bnc #396444
- 2.16.20

-------------------------------------------------------------------
Wed Jun  4 13:39:59 CEST 2008 - juhliarik@suse.cz

- added fix for problem with deleting boot sections bnc #396810
- 2.16.19

-------------------------------------------------------------------
Wed Jun  4 10:06:01 CEST 2008 - juhliarik@suse.cz

- added fix for problem with liveCD and simlinks for initrd and 
  kernel (bnc# 393030)
- 2.16.18

-------------------------------------------------------------------
Mon May 26 18:34:43 CEST 2008 - juhliarik@suse.cz

- added fix for problem with editing boot section for LILO 
  (bnc# 340732)
- added fix for cloning boot section (bnc# 390719)
- 2.16.17

-------------------------------------------------------------------
Fri May 16 16:40:22 CEST 2008 - jsrain@suse.cz

- added categories Settings and System into desktop file
  (bnc #382778)

-------------------------------------------------------------------
Thu May 15 17:51:28 CEST 2008 - juhliarik@suse.cz

- added fix for bnc# 164884 - disabled Back button during 
  installation
- added missing strings bnc# 386527
- 2.16.16

-------------------------------------------------------------------
Wed May  7 14:54:16 CEST 2008 - juhliarik@suse.cz

- added fix for bnc#335526 - problem with adding "resume" into 
  boot section for memtest
- 2.16.15

-------------------------------------------------------------------
Mon Apr 28 14:16:26 CEST 2008 - juhliarik@suse.cz

- added fix for bnc#232424 - problem with propose new config.
- 2.16.14

-------------------------------------------------------------------
Tue Apr 22 13:09:57 CEST 2008 - juhliarik@suse.cz

- added fix for bnc#363254
- added fix for UI problem with ComboBoxes and "Browse..." button
- 2.16.13

-------------------------------------------------------------------
Fri Apr 18 15:52:47 CEST 2008 - juhliarik@suse.cz

- added fix for (bnc#381192) bootloader uses grubonce _and_ kexec
- added detecting VirtualBox - cancel using kexec
- 2.16.12

-------------------------------------------------------------------
Thu Apr 17 20:19:04 CEST 2008 - juhliarik@suse.cz

- new version
- 2.16.11

-------------------------------------------------------------------
Thu Apr 17 20:02:19 CEST 2008 - locilka@suse.cz, juhliarik@suse.cz

- fixed initializing of combo-box widgets in dialogs, ComboBox
  in Qt does not accept `Value, using `Items instead (bnc #380781).
- using `InputField as a replacement for obsolete `TextEntry.

-------------------------------------------------------------------
Wed Apr 16 15:20:15 CEST 2008 - juhliarik@suse.cz

- added fix for activating DM-RAID boot partition (bnc #337742)
- added fix for lilo and raid version (bnc #357897)
- 2.16.10

-------------------------------------------------------------------
Fri Apr 11 15:53:19 CEST 2008 - juhliarik@suse.cz

- added handling of option for calling kexec instead of reboot
  (fate#303395)
- 2.16.9

-------------------------------------------------------------------
Tue Apr  1 12:24:12 CEST 2008 - jsrain@suse.cz

- adapted to changed handling of inst_finish steps during live
  installation

-------------------------------------------------------------------
Thu Mar 27 09:32:41 CET 2008 - juhliarik@suse.cz

- added deleting of duplicated sections after installation
- 2.16.8

-------------------------------------------------------------------
Thu Mar 20 12:45:20 CET 2008 - jsrain@suse.cz

- updated the way section list is displayed in the installation
  proposal (fate#120376)
- 2.16.7

-------------------------------------------------------------------
Tue Mar 18 10:07:57 CET 2008 - jsrain@suse.cz

- keep the 'linux' section name if product name is empty 
  (bnc#371741)

-------------------------------------------------------------------
Mon Mar 17 12:43:32 CET 2008 - jsrain@suse.cz

- added 'StartupNotify=true' to the desktop file (bnc #304964)

-------------------------------------------------------------------
Fri Mar 14 14:57:17 CET 2008 - juhliarik@suse.cz

- added inst_bootloader for saving config file before installing 
  kernel (F #302660) 
- 2.16.6

-------------------------------------------------------------------
Thu Jan 31 13:03:52 CET 2008 - locilka@suse.cz

- Update::*version were moved to Installation::*version.
- 2.16.5

-------------------------------------------------------------------
Thu Jan 24 09:01:01 CET 2008 - juhliarik@suse.cz

- added patch for Bug#352020 - Graphical failsafe mode
- added support for Fate#300779: Install diskless client (NFS-root) 
- 2.16.4

-------------------------------------------------------------------
Tue Dec 11 16:12:09 CET 2007 - jsrain@suse.cz

- do not translate boot menu to unsupported language (#310459)
- 2.16.3

-------------------------------------------------------------------
Wed Dec  5 12:36:32 CET 2007 - jsrain@suse.cz

- fixed the device map proposal if USB stick is present (F#302075)

-------------------------------------------------------------------
Wed Oct 31 14:32:59 CET 2007 - dfiser@suse.cz

- Adapted to change of StorageDevices API.
- v2.16.2

-------------------------------------------------------------------
Wed Oct 31 14:08:59 CET 2007 - locilka@suse.cz

- installedVersion and updateVersion moved from 'Update' to
  'Installation' YCP module to remove dependencies.

-------------------------------------------------------------------
Thu Oct 11 15:22:27 CEST 2007 - od@suse.de

- migrate SLES9 persistent device ("...p1") names to SLES10
  persistent device names ("...-part1") (#162216)
- 2.16.1

-------------------------------------------------------------------
Wed Sep 26 21:22:58 CEST 2007 - od@suse.de

- added flag avoid_reading_device_map to blRead(), all internal
  Read()s and ReadSettings() interface to perl-Bootloader: used by
  BootLILO and BootGRUB during update to migrate device names in
  the device_map and then re-read the config files with correct
  device name translation (#328448)
- do not install bootloader in XEN paravirtualized DomU (#308451)
- 2.15.29

-------------------------------------------------------------------
Tue Sep 25 13:53:18 CEST 2007 - od@suse.de

- re-read bootloader config from system after the delayed run of
  perl-Bootloader updates, then call FlagOnetimeBoot() based on
  current setup (#328078)
- 2.15.28

-------------------------------------------------------------------
Tue Sep 25 11:09:55 CEST 2007 - od@suse.de

- added logging to find problem in #328078
- minor addition of whitespace
- 2.15.27

-------------------------------------------------------------------
Mon Sep 24 21:25:37 CEST 2007 - od@suse.de

- Storage::GetTranslatedDevices() called often and uneccesarily
  (related to #304269):
  - added more logging to UpdateSections()
  - added comments and FIXMEs
  - disabled calling device name update again for "linux",
    "failsafe" and "initrd" sections: this is not needed and would
    reverse device name updates when forwards and backwards device
    name update mappings exist
  - enabled device name updates for "other" sections (booting other
    installations)
- (related to #326372, see comment #12)
  - fix "Interpreter" error: also activates persistent device
    translation for device.map in yast2-bootloader (but no disk
    device mappings are defined in yast2-storage, so devices remain
    untranslated as of now)
- 2.15.26

-------------------------------------------------------------------
Fri Sep 21 16:19:02 CEST 2007 - od@suse.de

- run delayed bootloader_entry at the very end of the update, when
  the migrated bootloader configuration (including device mapping)
  has already been written (#309837)
- added some comments
- 2.15.25

-------------------------------------------------------------------
Thu Sep 20 21:00:14 CEST 2007 - od@suse.de

- log the contents of the perl-BL_delayed_exec script (#309837)
- 2.15.24

-------------------------------------------------------------------
Thu Sep 20 18:44:06 CEST 2007 - od@suse.de

- ckornacker@suse.de: added PREFIX to Makefile.cvs
- when bootloader_entry saved (during kernel postuninstall) a
  command in /boot/perl-BL_delayed_exec for delayed execution in
  the target system, run that script to remove old sections
  (#309837)
- 2.15.23

-------------------------------------------------------------------
Tue Sep 18 10:03:53 CEST 2007 - od@suse.de

- update the default entry during update when the comment with the
  former default exists, even if the current default is valid
  (#309837)
- 2.15.22

-------------------------------------------------------------------
Mon Sep 17 19:31:03 CEST 2007 - od@suse.de

- #309837:
  - fix setting the default section at the end of an update,
    according to saved previous default kernel image flavor
  - use fallback flavors if previous flavor is unavailable
- 2.15.21

-------------------------------------------------------------------
Thu Sep 13 05:41:00 CEST 2007 - od@suse.de

- specify blockoffset as string, rather than number
- added a FIXME comment
- fixed conversion of obsolete filenames in kernel and initrd keys
- fixed conversion of device names in root and chainloader keys
  (#309837)
- 2.15.20

-------------------------------------------------------------------
Tue Aug 28 18:35:52 CEST 2007 - pth@suse.de

- Fix the code in bootloader_finish so that the one-time-boot code
  is actually called.
- Redo the logic and structure of the one-time booting code.
  * Global Write uses Bootloader::getDefaultSection() to determine the
    section name.
  * New function BootCommon::Section2Index that determines the
    index # for a given section, currently only used by 
    BootGRUB::FlagOnetimeBoot.

-------------------------------------------------------------------
Wed Aug 15 20:34:07 CEST 2007 - od@suse.de

- forgot to use changed sections (feature #302302)
- added logging with y2milestone()s for last change
- 2.15.17

-------------------------------------------------------------------
Mon Aug 13 22:32:26 CEST 2007 - od@suse.de

- grub: feature #302302:
  - added code to UpdateSections() to update old sections for
    "other" installations to chainloader/configfile sections
  - moved PBR-examination code to function IsPartitionBootable(),
    used by BootGRUB::CreateSections() and
    BootCommon::UpdateSections() now
  - always use a "root" command for "other" installations: added
    a "root" command to chainloader entries
  - also use "noverifyroot" and "blockoffset" in chainloader
    entries
  - added a FIXME comment
- 2.15.16

-------------------------------------------------------------------
Fri Aug 10 20:11:24 CEST 2007 - od@suse.de

- part of feature #301313:
  - added front-end function and infrastructure in switcher.ycp for
    FlagOnetimeBoot()
  - added FlagOnetimeBoot() implementation for POWERLILO
- fixed return codes of examine_mbr.pl: do not overlap error codes
  with "bootloader stage1 needs to be (re)-installed here" return
  code
- evaluate new return code in yast2-bootloader
- added documentation comment to examine_mbr.pl
- changed documentation comments where yast2-bootloader calls
  examine_mbr.pl
- fixed error in autoinstall client that prevented importing legacy
  global keys
- added/fixed some comments
- added documentation comments to BootGRUB::CreateSections()
- changed two y2debug() into y2milestone()
- fixed: a chainloader entry may have been produced that pointed to
  the boot partition of our current installation
- grub: implemented booting other Linux installations on the system
  via chainloader/configfile entries (feature #302302)
- fixed: if-block contained no statement, uncommented y2debug() in
  there
- 2.15.15

-------------------------------------------------------------------
Thu Jul 26 07:26:05 CEST 2007 - jsrain@suse.cz

- removed unneeded yast2-devel from BuildRequires
- 2.15.14

-------------------------------------------------------------------
Fri Jul 20 18:21:03 CEST 2007 - od@suse.de

- preventing cyclic dependency in autobuild with a BuildIgnore on
  autoyast2-installation
- 2.15.13

-------------------------------------------------------------------
Fri Jul 13 18:25:18 CEST 2007 - od@suse.de

- converting old key "kernel" to new key "image" when converting
  autoyast configuration to export map (#285790)
- re-added lost y2milestone() to BootELILO.ycp
- creating "image" section instead of "kernel" section now in
  CreateLinuxSection()
- 2.15.11

-------------------------------------------------------------------
Wed Jul 11 00:25:18 CEST 2007 - od@suse.de

- Merge from SLES10-SP1 branch:
- let "SLES 9 style" autoyast xml files configure bootloader
  timeout (#214468, #183051)
- added help texts and widget descriptions to grub and elilo
  (#221737)
- Fixed type of passed arguments in function Import() (in
  modules/Bootloader.ycp & modules/BootELILO.ycp) (#236163)
- bootloader.rnc fixed for autoyast schema check
- set __auto key to false when user clones sections (#241158)
- added log message when FixSections() silently discards a section
  (#241158)
- fixed some whitespace
- fixed myToInteger(): return 0 if string cannot be converted to
  integer
- bootloader.rnc fixed for autoyast schema check (#211014)
- always log the target map when Propose() is called (not only when
  we debug)
- convert custom boot device names to the names indicated by the
  mountby setting; this is one part of a change to use persistent
  device names for the bootloader boot device, the rest requires
  simultaneously changing perl-Bootloader because of an
  incompatible interface change
  (#248162)
- #214468:
  - fixed autoyast schema
  - fixed import of autoyast data: do not remove the "default" option
- GRUB only: integrated the new boot_*, generic_mbr and activate
  keys (found in the "globals" map) from the new
  widget/perl-Bootloader interface into the internal workings of
  the grub code
  - for grub, this obsoletes the global variables loader_device,
    selected_location (aka loader_location), repl_mbr and activate
  - fixes loosing the information of multiple selected bootloader
    installation devices (#245680)
  - fixes faulty detection of user-changes to the "/boot" and "/"
    devices from yast2-storage (#247852)
  - decided that boot_mbr_md key is unneeded, because the decision
    to write to the MBRs of all underlying devices of a soft-RAID
    is automatic (kept commented-out sample code for boot_mbr_md)
  - decided that boot_extended is unneeded, because the decision to
    write the bootloader to the extended partition instead of to an
    un-activatable "/boot" or "/" partition is automatic (kept
    commented-out sample code for boot_extended)
  - removed wrapper code for variable translation from
    BootGRUB::Propose()
  - made private copies of functions in grub/misc.ycp and changed
    the code to use the new interface variables only (this is also
    wanted for better code separation between bootloaders, to
    reduce amount of special-case handling (to be worked on)):

* from routines/misc.ycp:
          grub_getPartitionToActivate ()
          grub_getPartitionsToActivate ()
          grub_getMbrsToRewrite ()
          grub_getFileChangeDate ()
          grub_saveMBR ()
          grub_updateMBR ()
          grub_DetectDisks ()

* from routines/lilolike.ycp:
          grub_ProposeDeviceMap ()
            ( ^^ really needed? no changes here, it just "belongs"
            to grub...)
          grub_ConfigureLocation()
          grub_DetectDisks ()
          grub_DisksChanged ()
          grub_LocationProposal ()

- added helper functions:
      grub/misc.ycp:          SetBootloaderDevice()
      routines/misc.ycp:      GetBootloaderDevices()

- added note to to-be-phased-out functions:
      routines/misc.ycp:      GetBootloaderDevice()

- made some functions globally accessible:
      routines/popup.ycp:     askLocationResetPopup ()
      routines/misc.ycp:      myToInteger ()
      routines/lilolike.ycp:  FindMBRDisk ()

- fixed bug with the detection of MD-RAID devices (both in
    grub_getPartitionToActivate and getPartitionToActivate): BIOS
    ID was assumed to be less than 128, but it starts at 128

- commented out some obsolete and broken code that would activate
    the "/boot" device on installation of the bootloader to MBR;
    the code was cancelled out by program logic ("activate" flag)
    though;
    this also simplified the interface to getPartitionToActivate ()

- added conditionals to Bootloader.ycp and BootCommon.ycp: do not
    handle obsolete variables for grub

- commented out probably obsolete code in BootGRUB::Read() to
    determine old_style loader_device from read devices (including
    old-style "mbr_md")

- added several FIXME:s
  - changed a fixed FIXME to FIXED

- when reading settings from the system: convert custom boot device
  names in globals to the kernel device names (#248162)
- corrected whitespace in grub/helps.ycp and ppc/helps.ycp
- fix faulty detection of user-changes to the "/boot" and "/"
  devices from yast2-storage: rewrote grub_DisksChanged() to work
  properly with boot_* variables (previous fix did not work
  correctly) (#247852)
- grub_DisksChanged() now returns a message summarizing all changes
  for selected bootloader devices; this message is now used in the
  popup that ask the user if he wants to repropose after a
  partitioning change (in askLocationResetPopup()) (#247852)
- rewrote check for disk changes to work with multiple selected
  bootloader locations in grub_DetectDisks() and
  grub_LocationProposal() (#247852)
- the summary message for GRUB now includes a short string ("/",
  "/boot", MBR) that gives the reason why each device has been
  selected for bootloader stage 1 installation
- changed comment for GetBootloaderDevices()
- GRUB only: accept old-style autoyast keys "repl_mbr" "activate" and
  "location" when importing an autoyast profile; "loader_device" is
  ignored (which may be fixable if we can make sure a target map is
  available) (#245680)
- grub:
  - if autoyast profile does not specify a bootloader location,
    propose one (#263305)
  - if autoyast profile does not specify a key for the default keys
    set by a yast-bootloader proposal, add these missing
    keys/values
- enabled translation of the kernel image name from the symlink to
  the real kernel file for the "failsafe" section; perl-Bootloader
  can handle this now
- convert device names in the grub device map to and from the
  "mount_by" device names as well (#248162)
- Changed location of EFI Bootloader Label widget in YaST2 gui (#242985)
- make installation of bootloader to the extended partition work
  with new design (#246161, #259050)
- enabled extended device handling in GetBootloaderDevices as well
- make persistent device names work with boot= directive for i386
  lilo (#248162)
- log conversion of old-style global keys from autoyast profile to
  new-style keys
- during update, update value of "default" directive for lilo and grub
  (#266534)
- do not show popup for changed MBR position when it did not
  change: use correct function for MBR detection (#267276)
- fixed autoyast logging change
- Fix for removal of wrong efiboot entries (#269130)
- fix for update-mode: fix updating of kernel-image and initrd
  filenames to the resolved symlinks (image-version and
  initrd-version) (#268731, helps not to trigger #267582 and
  #244033)
- #270202:
  - grub: fix erroneously added section "Hard Disk" on systems
    without a floppy drive: use new style variables for detecting
    that we install stage1 to a floppy disk
  - for bootloaders that still use the old style variables, check
    for undefined loader_device before comparing to floppy device
- 2.15.10

-------------------------------------------------------------------
Sat Jul  7 00:25:57 CEST 2007 - od@suse.de

- Remove limal-devel from BuildRequires again
- 2.15.9

-------------------------------------------------------------------
Wed Jul  4 09:25:00 CEST 2007 - aj@suse.de

- Add limal-perl to Requires as well.

-------------------------------------------------------------------
Wed Jul  4 08:33:40 CEST 2007 - aj@suse.de

- Fix BuildRequires so that package builds again.

-------------------------------------------------------------------
Tue Jul  3 17:27:50 CEST 2007 - od@suse.de

- re-added limal-devel to BuildRequires

-------------------------------------------------------------------
Tue Jul  3 16:34:02 CEST 2007 - od@suse.de

- moved Bootloader_API.pm from limal-bootloader to yast2-bootloader

-------------------------------------------------------------------
Thu Jun 21 17:36:59 CEST 2007 - adrian@suse.de

- fix changelog entry order

-------------------------------------------------------------------
Fri May 25 13:30:04 CEST 2007 - jsrain@suse.cz

- removed outdated translations from .desktop-files (#271209)

-------------------------------------------------------------------
Wed Apr 11 19:14:30 CEST 2007 - aosthof@suse.de

- Fixed erroneous EFI Bootloader Label (#242985) in BootELILO.ycp
- Fixed removal of obsolete entries in EFI Boot Menu in
  BootELILO.ycp (#237873)
- 2.15.8

-------------------------------------------------------------------
Thu Mar  1 10:04:44 CET 2007 - aosthof@suse.de

- Reverted to make Xen kernel default boot kernel if Xen pattern
  or Xen RPMs are installed. (Fate #301384)
- 2.15.7

-------------------------------------------------------------------
Tue Feb 27 16:33:32 CET 2007 - od@suse.de

- include yast2-storage in BuildRequires
- 2.15.6

-------------------------------------------------------------------
Mon Feb 26 18:44:18 CET 2007 - od@suse.de

- safeguard against mount-by device that does not exist (yet): fall  
  back to kernel name (#239473, #223608)
- fix entry for memtest86, it is named memtest86+ meanwhile
- collecting device information for perl-Bootloader now works with
  persistent device names; this caused a bug in the grub
  configuration where the gfxmenu entry was discarded because the
  device name could not be translated, as well as unbootable system
  (#244566, #247775)
- 2.15.5

-------------------------------------------------------------------
Tue Jan 23 12:58:51 CET 2007 - aosthof@suse.de

- Forgot to delete "src/clients/bootfloppy.ycp" and
  "src/config/bootfloppy.desktop" from SVN (#218437)

-------------------------------------------------------------------
Tue Jan 23 10:56:42 CET 2007 - aosthof@suse.de

- Removed bootfloppy module due to malfunction (#218437)
- 2.15.4

-------------------------------------------------------------------
Wed Jan 17 13:09:10 CET 2007 - jplack@suse.de

- revise efi boot manager entry handling (#233537)

-------------------------------------------------------------------
Tue Jan 16 23:46:27 CET 2007 - jplack@suse.de

- fix various zipl configuration problems (#235486)

-------------------------------------------------------------------
Mon Jan 15 15:03:49 CET 2007 - jplack@suse.de

- more stream lining in help messages

-------------------------------------------------------------------
Mon Jan 15 14:44:26 CET 2007 - jplack@suse.de

- handle efi boot manager entries properly (#233537)

-------------------------------------------------------------------
Mon Jan 15 13:33:00 CET 2007 - jplack@suse.de

- add label text snippets for grub so that they can get translated

-------------------------------------------------------------------
Thu Jan 11 14:10:31 CET 2007 - jplack@suse.de

- make xen section the first entry which will get the default
  though (FATE#301384)

-------------------------------------------------------------------
Wed Jan 10 18:06:26 CET 2007 - jplack@suse.de

- mostly complete fix for #228833, wrong elilo configurator

-------------------------------------------------------------------
Fri Jan  5 19:01:07 CET 2007 - jplack@suse.de

- fixed message handling, proposal, dialog handling for zipl, etc.
  (#228841, Fate#300732)

-------------------------------------------------------------------
Fri Dec 22 16:45:54 CET 2006 - jplack@suse.de

- do map "kernel" tag to "image" tag for now, so that proposal gets
  interpreted right.

-------------------------------------------------------------------
Fri Dec 22 09:57:53 CET 2006 - aosthof@suse.de

- Fixed "Propose New Configuration" in Bootloader Settings in YaST
  - Part 1 (#230230)
- Fixed "Propose New Configuration" in Bootloader Settings in YaST
  - Part 2 (#230230)
- 2.15.2

-------------------------------------------------------------------
Thu Dec 14 13:56:26 CET 2006 - jplack@suse.de

- code review and cleanup: eliminate dead code, eliminate simple
  functions used once, keep local functions local (part2)

-------------------------------------------------------------------
Mon Dec 11 18:38:35 CET 2006 - jplack@suse.de

- code review and cleanup: eliminate dead code, eliminate simple
  functions used once, keep local functions local (part1)

-------------------------------------------------------------------
Mon Dec 11 17:05:58 CET 2006 - jplack@suse.de

- replace Kernel::GetFinalKernel function which is broken by design
  by Kernel::ComputePackage.

-------------------------------------------------------------------
Mon Dec 11 16:27:16 CET 2006 - jplack@suse.de

- move CheckAdditionalKernels from misc to Grub and fix that crappy
  stuff

-------------------------------------------------------------------
Fri Dec  8 19:14:25 CET 2006 - od@suse.de

- related to help_messages and descriptions:
  - added comments to generic_Description() and the descriptions
    variable
  - corrected one warning and one debug message
  - renamed arch_widget_name to loader_widget_name, matching new
    functionality
- 2.15.1

-------------------------------------------------------------------
Fri Dec  8 15:40:38 CET 2006 - jplack@suse.de

- basic implementation for generic bootloader widgets for ELILO
  (Fate#300732)

-------------------------------------------------------------------
Fri Dec  8 12:03:16 CET 2006 - jplack@suse.de

- more zipl changes for Fate#300732
- merge elilo/misc into basic module

-------------------------------------------------------------------
Fri Dec  8 11:25:20 CET 2006 - jplack@suse.de

- basic implementation for generic bootloader widgets for ZIPL
  (Fate#300732)

-------------------------------------------------------------------
Fri Dec  1 16:58:24 CET 2006 - od@suse.de

- use kernel and initrd softlinks in Failsafe entry again, thus
  preventing the removal of the Failsafe entry when the kernel is
  updated (#224481)
- 2.14.15

-------------------------------------------------------------------
Fri Dec  1 11:32:49 CET 2006 - jplack@suse.de

- signal change of boot loader location so that the boot loader can
  be rewritten if needed (#225023)
- 2.14.14

-------------------------------------------------------------------
Fri Nov 24 19:35:33 CET 2006 - aosthof@suse.de

- fixed usage of function remove()
- added FIXME
- fixed typo in comment
- actually use sorted DMTargetMap by adding bios_ids (#223473)
- 2.14.13

-------------------------------------------------------------------
Fri Nov 24 17:03:10 CET 2006 - od@suse.de

- fixed typo in a comment
- added a FIXME in BootCommon
- added kernel and image file link resolve code to
  BootPOWERLILO.ycp (adapted from BootCommon.ycp)
- Fix broken bootloader configuration on ppc: initialize library
  at the appropriate point again (#210535)
- 2.14.12

-------------------------------------------------------------------
Fri Nov 24 14:47:00 CET 2006 - aosthof@suse.de

- Sorted DMTargetMap in lilolike.ycp to match the BIOS order
  (#223473)
- Fixed typos in lilolike.ycp
- 2.14.11

-------------------------------------------------------------------
Wed Nov 22 17:08:09 CET 2006 - ug@suse.de

- schema file fixes (#215263)

-------------------------------------------------------------------
Wed Nov 22 09:33:25 CET 2006 - aosthof@suse.de

- Fixed typo in lilolike.ycp (#223145)
- 2.14.10

-------------------------------------------------------------------
Tue Nov 21 20:59:51 CET 2006 - aosthof@suse.de

- Fixed target map for dmraids (aka FakeRAIDs) in lilolike.ycp
  (#222471)
- 2.14.9

-------------------------------------------------------------------
Tue Nov 21 14:56:00 CET 2006 - od@suse.de

- have a current target map available in the log when we debug
- added y2milestone()s around remapping
- fix forgetting to rewrite some kernel/image entries (ycp really
  should have a for loop, so resetting variables is not forgotten)
  (#214935)
- 2.14.8

-------------------------------------------------------------------
Tue Nov 21 14:29:08 CET 2006 - jplack@suse.de

- UpdateInitrdLine function is old, broken, rotten and completely
  useless now

-------------------------------------------------------------------
Tue Nov 21 11:45:46 CET 2006 - jplack@suse.de

- suppress newline from readlink command, breaks config files
- 2.14.7

-------------------------------------------------------------------
Tue Nov 21 10:16:22 CET 2006 - jplack@suse.de

- "activate" and "generic_mbr" do now get set if newly proposed

-------------------------------------------------------------------
Mon Nov 20 22:57:32 CET 2006 - od@suse.de

- #214935:
  - added more comments
  - only resolve symlinks for linux, xen and failsafe sections,
    type image and xen
  - do not resolve symlinks for files that are not on the default
    boot partition (because they have a grub device name prefix)
  - added more logging
  - actually use the resolved symlinks for kernel and initrd
- moved some comments to the right position in the code
- 2.14.6

-------------------------------------------------------------------
Mon Nov 20 16:10:03 CET 2006 - jplack@suse.de

- quick fix for problems with Xen pattern selection (#208380):
  never use cached_proposal for now

-------------------------------------------------------------------
Mon Nov 20 15:52:07 CET 2006 - od@suse.de

- reverted initrd and kernel names to links for everything but
  Mode::normal() (#214935)
- resolve symlinks for kernel and initrd during inst_finish, so
  that the "real names" are put into the bootloader configuration
  -- this is the plan B solution, plan A (which shows correct
  filenames instead of link names in the proposal) does not
  currently work (#214935)
- 2.14.4

-------------------------------------------------------------------
Mon Nov 20 15:31:58 CET 2006 - jplack@suse.de

- fix format for DefaultKernelParams

-------------------------------------------------------------------
Mon Nov 20 15:29:50 CET 2006 - jplack@suse.de

- fix boot loader location mapping: check boot_root before
  boot_boot (#219409)

-------------------------------------------------------------------
Mon Nov 20 13:12:45 CET 2006 - jplack@suse.de

- fix full adoption to new grub name sceme ((#214935, FATE#300732)

-------------------------------------------------------------------
Fri Nov 17 13:17:50 CET 2006 - od@suse.de

- added comments
- fix finding the correct names for kernel image and initrd (not
  yet fixed for powerlilo) (#214935)
- first part of fix for resetting user changes when going to expert
  settings
- 2.14.3

-------------------------------------------------------------------
Thu Nov 16 13:32:48 CET 2006 - jplack@suse.de

- section type of 'xen' is now handled (FATE#300732)

-------------------------------------------------------------------
Wed Nov 15 16:21:37 CET 2006 - jplack@suse.de

- fixed Summary generation for Grub (#220285), did still consider
  old-style variable loader-device

-------------------------------------------------------------------
Wed Nov 15 11:19:04 CET 2006 - jplack@suse.de

- widget for type selectdevice did not get initialized (#221180)

-------------------------------------------------------------------
Mon Nov 13 16:40:04 CET 2006 - od@suse.de

- add more variables for the new perl-Bootloader interface to the
  autoyast DTD for yast2-bootloader: currently, the user needs to
  specify them if he wants to specify any global variable (which
  probably is the right interface for him)
- reverted BootGRUB to use FixGlobals(), this functionality is not
  a bug
- added comments to FixGlobals() and the call from BootGRUB to it
- move setting of boot_* and activate keys in globals for new
  perl-Bootloader interface from BootCommon::i386LocationProposal()
  in lilolike to the end of BootGRUB::Propose(), so that the need
  to set defaults for the other values in globals is detected and
  these are proposed as well (#219409)
- 2.14.1

-------------------------------------------------------------------
Mon Nov 13 13:19:01 CET 2006 - jplack@suse.de

- remove in ycp has bogus semantics (#220365)

-------------------------------------------------------------------
Mon Nov 13 12:58:18 CET 2006 - jplack@suse.de

- generic MBR not written/activate flag not set due to incomplete
  impl. of FATE#300732

-------------------------------------------------------------------
Mon Nov 13 12:36:50 CET 2006 - ug@suse.de

- schema file for autyast fixed

-------------------------------------------------------------------
Mon Nov 13 11:15:20 CET 2006 - jplack@suse.de

- fix missing proposal of global values during installation
  (#219409), function FixGlobals was inappropriate

-------------------------------------------------------------------
Thu Nov  9 21:54:15 CET 2006 - od@suse.de

- added a few comments to the new code
- fix trashing globals in grub et al.: use remove() to remove
  values from a map (#219409)
- 2.13.86

-------------------------------------------------------------------
Wed Nov  8 20:49:52 CET 2006 - od@suse.de

- moved change_widget_default_value() to BootCommon.ycp
- use change_widget_default_value() to work around "select" widget
  default value bug
- logging variables filled by grub proposal
- using correct variable (globals) for new perl-Bootloader
  interface (#213256)
- 2.13.85

-------------------------------------------------------------------
Wed Nov  8 18:16:57 CET 2006 - od@suse.de

- changed some comments
- move global_options, section_options and exports (new
  perl-Bootloader interface) to BootCommon.ycp
- pass proposal for grub to new perl-Bootloader interface (#213256)
- 2.13.84

-------------------------------------------------------------------
Tue Nov  7 18:25:55 CET 2006 - od@suse.de

- removed unused variable
- changed and added some documentation in comments
- fixed global options filtering for global options widget
  (#213256)
- 2.13.83

-------------------------------------------------------------------
Tue Oct 31 17:08:26 CET 2006 - od@suse.de

- autoyast Relax-NG Compact schema file added (#215263)
- 2.13.82

-------------------------------------------------------------------
Tue Oct 31 02:51:33 CET 2006 - od@suse.de

- fixed exporting the device map to autoyast (#211908)

-------------------------------------------------------------------
Tue Oct 17 00:35:45 CEST 2006 - od@suse.de

- packaged missing grub/help.ycp and generic/help.ycp
- added comments to UpdateGfxMenuContents()
- 2.13.80

-------------------------------------------------------------------
Fri Oct 13 11:45:28 CEST 2006 - sf@suse.de

- Bug #173486: do not display ssh message when installed with ssh 
  and vnc

-------------------------------------------------------------------
Thu Oct 12 09:35:16 CEST 2006 - jplack@suse.de

- implementation of generic password widget (FATE#300732)

-------------------------------------------------------------------
Mon Oct  9 19:09:25 CEST 2006 - jplack@suse.de

- implement generic widget functionality for Grub (FATE#300732)
- 2.13.79

-------------------------------------------------------------------
Tue Sep 26 17:23:23 CEST 2006 - jplack@suse.de

- part of new interface for FATE#300732
- 2.13.78

-------------------------------------------------------------------
Tue Sep 26 14:47:58 CEST 2006 - jplack@suse.de

- implementation for FATE#120026: button to initialize bootloader

-------------------------------------------------------------------
Thu Sep 21 10:19:54 CEST 2006 - od@suse.de

- jplack@suse.de: basic implementation for 'selectdevice' entry
  type which will act as a hook for more sophisticated UI handling
  for device-by-id selection and such.
- 2.13.77

-------------------------------------------------------------------
Fri Sep 15 19:00:21 CEST 2006 - od@suse.de

- added caching of bootloader proposal patch by lslezak@suse.de,
  with some changed variable names and added comments (feature
  #300709)
- 2.13.76

-------------------------------------------------------------------
Wed Sep 13 20:19:07 CEST 2006 - od@suse.de

- reverted last change (in SVN) to bootfloppy.ycp, so the final
  correction to include this change of aosthof again:
  A few corrections had to be done related to wrong pathes (Bug
  #180240)
- using parted for activation of boot partition again (instead of
  /sbin/activate from the lilo package) -- extended partition
  handling was fixed (#167602)
- 2.13.75

-------------------------------------------------------------------
Mon Sep 11 13:45:44 CEST 2006 - mvidner@suse.cz

- Fixed autodocs.

-------------------------------------------------------------------
Mon Sep  4 17:20:15 CEST 2006 - jplack@suse.de

- support new options no_os_chooser and optional (#202069, #202072)

-------------------------------------------------------------------
Tue Aug 22 15:21:30 CEST 2006 - od@suse.de

- jplack: use new device_map format (#198244)
- 2.13.74

-------------------------------------------------------------------
Wed Jun 21 14:28:21 CEST 2006 - uli@suse.de

- zipl: add "TERM=linux console=..." to proposal if booted with 
  TERM=linux (bug #186970)

-------------------------------------------------------------------
Mon Jun 19 15:18:29 CEST 2006 - aosthof@suse.de

- Fixed erroneous pathes in function createFloppyImage() in 
  bootfloppy.ycp (#180240)

-------------------------------------------------------------------
Fri Jun  9 19:14:30 CEST 2006 - od@suse.de

- when a change somewhere in the proposal causes a new section to
  be created (e.g. for a xen kernel), if the section does not yet
  exist and has not explicitly been deleted, add it to our proposal
  (#170469)
- added lots of commentary to FixSections()
- revert patch that added "powersaved=off" to append line in
  failsafe section - more testing needed (#153345)
- 2.13.73

-------------------------------------------------------------------
Thu Jun  8 17:23:54 CEST 2006 - od@suse.de

- ppc: always initialize board type when making a proposal in an
  autoyast installation (#178831)
- 2.13.72

-------------------------------------------------------------------
Wed Jun  7 18:30:11 CEST 2006 - od@suse.de

- add "powersaved=off" to append line in failsafe section for i386,
  x86_64 and ia64 (#153345)
- filter virtual mountpoints such as swap etc. (#182375)
- use full path to MD device (was broken since ever according to
  documentation)
- 2.13.71

-------------------------------------------------------------------
Fri Jun  2 17:42:57 CEST 2006 - jplack@suse.de

- fixed raid 1 detection in lib_iface.ycp (#178802)

-------------------------------------------------------------------
Wed May 31 16:11:36 CEST 2006 - od@suse.de

- check for RAID1 md arrays as all others will break on reboot
  (#178802)
- 2.13.69

-------------------------------------------------------------------
Wed May 31 13:49:59 CEST 2006 - od@suse.de

- replace occurences of a-z and A-Z with character lists to prevent
  problems in some locales (#177560)
- 2.13.68

-------------------------------------------------------------------
Mon May 29 13:06:10 CEST 2006 - od@suse.de

- iseries: fix proposal for NWSSTG boot device (#167390)
- 2.13.67

-------------------------------------------------------------------
Mon May 22 18:30:52 CEST 2006 - jplack@suse.de

- add initial support for xenpae (#177051)
- 2.13.66

-------------------------------------------------------------------
Fri May 19 16:05:32 CEST 2006 - od@suse.de

- added FIXME note to Bootloader.ycp
- send partitioning info always when Initializer called (#161755)
- 2.13.65

-------------------------------------------------------------------
Fri May 19 12:25:09 CEST 2006 - od@suse.de

- fixed installation of installation kernel (ISERIES64) into slot A
  on iSeries (#165497)
- 2.13.64

-------------------------------------------------------------------
Wed May 17 22:42:52 CEST 2006 - od@suse.de

- fix backwards mapping of "mount by" device names when bl
  configuration is read (#176201)
- revert last change in MountByDev2Dev() and use y2milestone()
  again
- 2.13.63

-------------------------------------------------------------------
Wed May 17 16:52:30 CEST 2006 - od@suse.de

- added bootloader device conversion for mount by ID, UUID etc. to
  BootPOWERLILO (#174349)
- added debug messages to Dev2MountByDev()
- changed 2x y2milestone() -> y2debug() in MountByDev2Dev()
- 2.13.62

-------------------------------------------------------------------
Fri May 12 16:02:34 CEST 2006 - od@suse.de

- during installation/update on ppc iseries, unconditionally
  install the ISERIES64 file from the installation media as rescue
  kernel into slot A (#165497)
- fixed some whitespace
- 2.13.61

-------------------------------------------------------------------
Fri May 12 13:24:19 CEST 2006 - od@suse.de

- adapted to ppc/BootPOWERLILO.ycp: fixed mangled section titles
  after update (#170579)
- 2.13.60

-------------------------------------------------------------------
Wed May 10 19:07:38 CEST 2006 - od@suse.de

- added comments to update code
- fixed mangled section titles after update (#170579)
- 2.13.59

-------------------------------------------------------------------
Wed May 10 15:49:39 CEST 2006 - od@suse.de

- fix broken consistency check for legacy iSeries with DASD only
  (#166378)
- make it possible to manually add a value to selection list
  (needed for work arounds #166378 et. al.)
- fix error typo in lib_iface.ycp
- 2.13.58

-------------------------------------------------------------------
Thu May  4 15:02:21 CEST 2006 - locilka@suse.cz

- merged texts from proofread 
- 2.13.57

-------------------------------------------------------------------
Thu May  4 11:02:00 CEST 2006 - jsrain@suse.cz

- change the message before reboot if performing an SSH
  installation (#160301)

-------------------------------------------------------------------
Tue May  2 18:53:10 CEST 2006 - od@suse.de

- on ppc, never create a "failsafe" section (#170565)
- 2.13.56

-------------------------------------------------------------------
Tue May  2 18:01:17 CEST 2006 - od@suse.de

- in UI, show explanatory message instead of missing UUID (before
  partition is formatted)
- added code readability comment
- 2.13.55

-------------------------------------------------------------------
Fri Apr 28 14:32:22 CEST 2006 - od@suse.de

- fixed elilo section name fix from #170129:
  - getLoaderType() cannot be called from GfxMenu.ycp, so changed
    internal Interface of GfxMenu::translateSectionTitle() to
    accept "loader" parameter instead of "allow_blanks" parameter
  - updated other functions to use/pass through the "loader"
    parameter now:
      GfxMenu::UpdateGfxMenuContents()
      GfxMenu::getTranslationsToDiacritics()
      BootCommon::translateSectionTitle()
      BootCommon::UpdateGfxMenuContents()
- changed some y2milestone() messages: do not mention "lilo" when
  it can be any bootloader type other than "grub"
- added me as co-author to BootCommon.ycp
- 2.13.54

-------------------------------------------------------------------
Thu Apr 27 16:05:59 CEST 2006 - od@suse.de

- examine_mbr.pl needs perl-Compress-Zlib
- 2.13.53

-------------------------------------------------------------------
Thu Apr 27 15:56:18 CEST 2006 - od@suse.de

- on ia64, do not use the short product name in the "second
  level" bootloader elilo -- use "linux" again instead (also
  sidesteps bug #170129)
- added a comment for a future feature that may introduce two "menu
  levels" for grub as well
- 2.13.52

-------------------------------------------------------------------
Mon Apr 24 16:10:54 CEST 2006 - sf@suse.de

- fixed regexp (Bug #168594)

-------------------------------------------------------------------
Fri Apr 21 19:23:12 CEST 2006 - od@suse.de

- (#148931, #164950), fixes features #300383, #300160, #300358:
  - for root partitions in bootloader config: automatically use mount
    by id, path, uuid and label as set up in yast2-storage
  - also display these as "hints" in the UI
- fixed some comments
- added a y2milestone in getPartitionList()
- fixed some whitespace
- 2.13.50

-------------------------------------------------------------------
Thu Apr 20 13:49:50 CEST 2006 - od@suse.de

- using /sbin/activate again (#167602)
- do not accept fsid 257 (on pmac) anymore, Apple_Bootstrap is now
  reported as fsid 258 (#167934)
- 2.13.49

-------------------------------------------------------------------
Wed Apr 12 18:30:49 CEST 2006 - od@suse.de

- accept fsid 257 (Apple_Bootstrap) as pmac boot partition
  (#165518)
- 2.13.48

-------------------------------------------------------------------
Wed Apr 12 17:37:31 CEST 2006 - od@suse.de

- print-product.ycp:
  - return short name for bootloaders other than grub (#163702)
  - do not attach version to product name (#165466)
- use short product name instead of "linux" as section name for
  bootloaders other than grub (#163702)
- 2.13.47

-------------------------------------------------------------------
Wed Apr 12 14:01:17 CEST 2006 - od@suse.de

- long name uses LABEL from content file everywhere now, so do not
  attach version anymore (#163702)
- fixed typo in message
- 2.13.46

-------------------------------------------------------------------
Tue Apr 11 22:17:59 CEST 2006 - od@suse.de

- on pmac: propose only partitions smaller than 20 cylinders
  (#158543)
- 2.13.45

-------------------------------------------------------------------
Tue Apr 11 20:59:57 CEST 2006 - od@suse.de

- propose bootloader location on pmac systems (#158543)
- changed comment
- 2.13.44

-------------------------------------------------------------------
Tue Apr 11 17:20:56 CEST 2006 - od@suse.de

- clone activate flag and loader_device for AutoYaST (#151501)
- 2.13.43

-------------------------------------------------------------------
Tue Apr 11 01:10:20 CEST 2006 - jplack@suse.de

- write config even if no create_efi_entry has been requested
  (#163260)

-------------------------------------------------------------------
Mon Apr 10 20:35:50 CEST 2006 - od@suse.de

- fixed invalid error on bootloader initialization (#164925)
- 2.13.41

-------------------------------------------------------------------
Mon Apr 10 20:20:08 CEST 2006 - od@suse.de

- fix BootPOWERLILO to return proposal again (introduced with dead
  code elimination a few days ago)
- changed some comments for code around "activate"
- 2.13.40

-------------------------------------------------------------------
Fri Apr  7 12:28:21 CEST 2006 - od@suse.de

- update_gfxmenu: added -f to rm to avoid error message on English
  installs (#163693)
- commented out dead code
- jplack/od: stop work flow for an illegal boot= selection
- 2.13.39

-------------------------------------------------------------------
Wed Apr  5 01:49:23 CEST 2006 - od@suse.de

- changed more prep_boot_partition from "/dev/null" to "" (#163387)
- 2.13.38

-------------------------------------------------------------------
Wed Apr  5 01:21:17 CEST 2006 - od@suse.de

- use empty string when no prep boot or FAT partition is found
  (#163387)
- 2.13.37

-------------------------------------------------------------------
Tue Apr  4 17:00:12 CEST 2006 - jplack@suse.de

- update list of possible selections, each time a generic widget is
  "called" (#161755)

-------------------------------------------------------------------
Mon Apr  3 20:51:38 CEST 2006 - od@suse.de

- do not add kernel option "selinux=0" on any architecture (#155856)
- fixed compilation errors in lib_iface.ycp
- 2.13.36

-------------------------------------------------------------------
Mon Apr  3 20:27:48 CEST 2006 - jplack@suse.de

- ppc: update default name if denoted section has been updated
- ppc: update global clone entry, too, if device names changed
- fix for #161755, send partition/disk info where neccessary
- reorder code so that new function SetDiskInfo is formed and can
  be used in various places to fix #161755 
- add proposed code change for virtual 'boot' mountpoints (#162242)

-------------------------------------------------------------------
Sat Apr  1 23:25:58 CEST 2006 - od@suse.de

- added TESTME comment: test parted partition activation with BSD
  slices
- remove more old-style backticks
- add needed comments
- added parted to Requires (#161316)
- changed a y2internal -> y2milestone
- fixed harmless typos
- 2.13.35

-------------------------------------------------------------------
Wed Mar 29 18:52:24 CEST 2006 - od@suse.de

- using parted for activation of boot partition now (instead of
  /sbin/activate from the lilo package) (#161316)
- fixed a typo
- fixed some whitespace
- added update-alternatives to BuildRequires
- 2.13.34

-------------------------------------------------------------------
Mon Mar 27 15:36:27 CEST 2006 - uli@suse.de

- changed s390* reboot message (bug #160045)

-------------------------------------------------------------------
Sun Mar 26 06:14:08 CEST 2006 - od@suse.de

- removed yast2-devel-packages from BuildRequires
- add replacements for yast2-devel-packages to BuildRequires
- 2.13.33

-------------------------------------------------------------------
Tue Mar 21 17:31:03 CET 2006 - jplack@suse.de

- fix console= handling on update, and some more update fixes (#155397)
- 2.13.32

-------------------------------------------------------------------
Tue Mar 21 15:16:32 CET 2006 - od@suse.de

- cleanup: move UpdateSections function into Update()'s body
- fixed #157939: iseries can boot even if no prep boot partition
  exists and/or is configured
- 2.13.31

-------------------------------------------------------------------
Mon Mar 20 23:49:04 CET 2006 - od@suse.de

- package clients/print-product.ycp
- 2.13.30

-------------------------------------------------------------------
Mon Mar 20 18:46:11 CET 2006 - od@suse.de

- fixes for #155397:
  - major cleanup of Update() code to be able to fix #155397
  - added "return ret" to CreateImageSection()
  - fixed parameters in call to UpdateSections()
  - fixed list element removal: remove() -> filter()
  - also removed translation of section title (GfxMenu) for ppc
    (perl-Bootloader will take care of this)
- print-product.ycp: remove " -- " from arguments to
  CommandLine::Print()
- 2.13.29

-------------------------------------------------------------------
Mon Mar 20 17:20:39 CET 2006 - od@suse.de

- doing the right thing for InitializeLibrary
- fix indentation/code style
- print-product.ycp was wrong in modules, moved to clients
- 2.13.28

-------------------------------------------------------------------
Fri Mar 17 23:37:22 CET 2006 - od@suse.de

- made text widget in error log message popup higher (#159264)
- fix indentation
- 2.13.27

-------------------------------------------------------------------
Fri Mar 17 18:25:03 CET 2006 - od@suse.de

- removed bootloader-theme from Requires: (#158588)
- 2.13.26

-------------------------------------------------------------------
Fri Mar 17 16:06:36 CET 2006 - od@suse.de

- moved CreateLinuxSection() to BootPOWERLILO.ycp and adapted for
  ppc (#144553):
   - kernel -> image 
   - removed code that is not used on ppc
   - added comments
- moved CreateLinuxSection up and using it for installation as well
- 2.13.25

-------------------------------------------------------------------
Wed Mar 15 16:34:50 CET 2006 - od@suse.de

- added debug output for (#156993)
- changed my_sections -> updated_sections
- 2.13.24

-------------------------------------------------------------------
Mon Mar 13 16:48:18 CET 2006 - od@suse.de

- jplack:
  - remove dead/unused code
  - add some FIXME comments
  - more cleanups
- 2.13.23

-------------------------------------------------------------------
Mon Mar 13 16:04:51 CET 2006 - od@suse.de

- changed some whitespace
- corrected fallback kernel to "/boot/vmlinux"
- copied UpdateSections() from lilolike.ycp to BootPOWERLILO.ycp
  and adapted to new interfaces (#144553)
- made read_default_section_name global in BootCommon.ycp (#144553)
- syntax cleanups
- proofread
- 2.13.21

-------------------------------------------------------------------
Wed Mar  8 00:41:02 CET 2006 - od@suse.de

- added proposal for prep and iseries (pmac still missing)
- created new function change_widget_default_value() and moved code
  from Propose() into this function
- proposal for prep and iseries set the default values for their
  widgets using change_widget_default_value()
- added FIXME: for improving the summary function
- fixed comment in chrp.ycp explaining the use of
  prep_same_disk_as_root
- 2.13.20

-------------------------------------------------------------------
Tue Mar  7 22:17:31 CET 2006 - od@suse.de

- #145597:
  - use old working proposal code from BootPPC in BootPOWERLILO
  - add comments where needed to understand the code
  - change lookup, lookup_value and modifySection and use []: instead
  - use search instead of find(string, string)
  - fixed header of BootPOWERLILO
  - fixed LocationProposal to use old BootPPC code
  - fixed some whitespace
  - call old currentBoardInit() from new Propose()
  - set proposed boot partition as default in widget
- add "global void" to jplack's bootloaderError()
- fix y2error format string
- fixed an obsolete FlushCache() -> CommitSettings()
- give an error popoup with log like in SLES9 (#145106)
- use only one log file for all bootloaders (#145106)
- cleanups, mostly indentation to make code readable
- fixed: activate on i386 did not work when p_dev["nr"] == "" (mean 
  whole disk) was one of loader_device or boot_partition
- unify confusing interface names: FlushCache -> CommitSettings
- give an error popoup with log like in SLES9 (#145106)
- fix one update problem on POWER
- use correct path to mkzimage for iSeries bootfile
- 2.13.19

-------------------------------------------------------------------
Fri Mar  3 20:27:17 CET 2006 - jplack@suse.de

- give an error popoup with log like in SLES9 (#145106)
- use only one log file for all bootloaders (#145106)
- fix one update problem on POWER

-------------------------------------------------------------------
Fri Mar  3 18:55:09 CET 2006 - jplack@suse.de

- fixed: activate on i386 did not work when p_dev["nr"] == "" (mean
  whole disk) was one of loader_device or boot_partition

-------------------------------------------------------------------
Wed Mar  1 09:06:08 CET 2006 - olh@suse.de

- use correct path to mkzimage for iSeries bootfile

-------------------------------------------------------------------
Tue Feb 28 12:35:40 CET 2006 - od@suse.de

- olh also fixed a typo in Bootloader.ycp
- 2.13.18

-------------------------------------------------------------------
Wed Feb 22 21:08:10 CET 2006 - olh@suse.de

- do a mount --bind /dev /mnt/dev in bootloader_finish.ycp (#144773)

-------------------------------------------------------------------
Thu Feb 16 19:31:10 CET 2006 - od@suse.de

- translateSectionTitle():
  - handle results properly when regexpsub() is called with a non-matching
    regex
  - fixed comment for ReplaceRegexMatch()
  - fixed execess -> excess in y2milestone()
  - added another y2milestone() for cutting off words
- 2.13.17

-------------------------------------------------------------------
Thu Feb 16 17:18:17 CET 2006 - od@suse.de

- wrote ReplaceRegexMatch() to globally replace matching regexes
- fix filtering of lilo bootloader section name with
  ReplaceRegexMatch()
- 2.13.16

-------------------------------------------------------------------
Thu Feb 16 15:50:30 CET 2006 - od@suse.de

- fixed typo in filtering of forbidden chars for lilo section titles
- added logging for lilo section title adaptation
- 2.13.15

-------------------------------------------------------------------
Wed Feb 15 15:28:00 CET 2006 - od@suse.de

- olh:
  - setting svn:keyword property to 'Author Date Id Revision'
  - typo s/instalaltion/installation/
- od:
  - restrict LILO section names to 11 chars -- use same algorithm
    as in perl-Bootloader, LILO.pm, sub FixSectionName()
- 2.13.14

-------------------------------------------------------------------
Tue Feb 14 13:34:23 CET 2006 - olh@suse.de

- fix typo in board_type_names

-------------------------------------------------------------------
Tue Feb 14 13:30:19 CET 2006 - olh@suse.de

- remove nubus support

-------------------------------------------------------------------
Wed Feb  1 16:31:31 CET 2006 - od@suse.de

- added to package: src/modules/print-product.ycp
- 2.13.13

-------------------------------------------------------------------
Fri Jan 27 09:28:04 CET 2006 - locilka@suse.cz

- merged texts from proofread

-------------------------------------------------------------------
Wed Jan 25 16:10:02 CET 2006 - od@suse.de

- added print-product.ycp, used by update-bootloader from
  perl-Bootloader 
- 2.13.12

-------------------------------------------------------------------
Fri Jan 20 14:24:33 CET 2006 - od@suse.de

- moved BootPOWERLILO initialization code out of constructor again
  -- this unconditionally initialized lib_iface for ppc
- 2.13.11

-------------------------------------------------------------------
Wed Jan 18 21:00:49 CET 2006 - od@suse.de

- remove __exports__ from globals in extract_exports_from_globals()
- delete obsolete function GoodPrepOrFatPartition()
- consider globals empty even if lines_cache_id is present
- fix merging of __exports__ in BootPOWERLILO constructor
- 2.13.10

-------------------------------------------------------------------
Tue Jan 17 19:10:45 CET 2006 - od@suse.de

- actually find and propose root and boot devices

-------------------------------------------------------------------
Tue Jan 17 15:45:18 CET 2006 - od@suse.de

- added comments in bootloader_proposal
- added GoodPrepOrFatPartition() in BootPOWERLILO
- a lot of FIXMEs added
- initial proposal for PPC

-------------------------------------------------------------------
Mon Jan 16 20:23:26 CET 2006 - jplack@suse.de

- moved widget descriptions (labels) to yast2-bootloader
- handle unified type descriptions: now <type>:<desc>:<default>:...
- add arch-specific Summary function

-------------------------------------------------------------------
Thu Dec 22 11:50:08 CET 2005 - uli@suse.de

- declare Write method implemented in BootZIPL.ycp

-------------------------------------------------------------------
Wed Dec 21 10:31:30 CET 2005 - visnov@suse.cz

- merged proofread texts

-------------------------------------------------------------------
Mon Dec 19 17:58:20 CET 2005 - jplack@suse.de

- always read the config from perl-Bootloader (#140127)
- activate generic help system
- give help messages that make sense
- avoid this i386 LILO bootloader config on ppc (#140127)
- 2.13.6

-------------------------------------------------------------------
Fri Dec 16 15:28:39 CET 2005 - jsrain@suse.cz

- moved bootloader background picture to separate package
- moved /boot/message handling to separate module
- 2.13.5

-------------------------------------------------------------------
Thu Dec 15 15:00:16 CET 2005 - uli@suse.de

- s390: dumped obsolete dump sections and dead code
- 2.13.4

-------------------------------------------------------------------
Tue Dec 13 19:25:12 CET 2005 - mvidner@suse.cz

- Fixed a type mismatch, hopefully fixing the installation (#138328).
- 2.13.3

-------------------------------------------------------------------
Thu Dec  8 18:25:07 CET 2005 - od@suse.de

- changes by jplack@suse.de:
  - use generic dialogs in PowerPC boot loader code
  - new files to build widgets from type information
  - changes for support of all options on POWER - generic stuff
- 2.13.2

-------------------------------------------------------------------
Mon Oct 31 09:44:19 CET 2005 - jsrain@suse.cz

- fixed losing GRUB sections in some cases (#130236)
- 2.13.1

-------------------------------------------------------------------
Wed Oct 26 13:29:26 CEST 2005 - jsrain@suse.cz

- do not create section for XEN if ungrading other bootloader than
  GRUB (#130474)
- fixed clonning a section, it changed also the original one
  (#129511)

-------------------------------------------------------------------
Fri Oct 21 12:36:16 CEST 2005 - jsrain@suse.cz

- do not set dom0_mem option for XEN (#121947)
- fixed selecting the swap partition for suspend to disk in other
  situations than installation (#128702)

-------------------------------------------------------------------
Tue Oct  4 12:43:30 CEST 2005 - jsrain@suse.cz

- fixed password setting help (#119591)

-------------------------------------------------------------------
Mon Oct  3 12:54:10 CEST 2005 - jsrain@suse.cz

- change selected radio button for loader location if loader
  location specified in combo box (#114193)

-------------------------------------------------------------------
Fri Sep 30 11:06:11 CEST 2005 - jsrain@suse.cz

- fixed reproposing configuration in installed system (#119428)
- fixed disappearing initrd lines from configuratiln file (#104048)

-------------------------------------------------------------------
Thu Sep 29 17:00:04 CEST 2005 - jsrain@suse.cz

- fixed importing the global bootloader settings from AutoYaST
  profiles (#118595)

-------------------------------------------------------------------
Tue Sep 27 10:14:08 CEST 2005 - jsrain@suse.cz

- export/import the loader location variable for AutoYaST (#116947)

-------------------------------------------------------------------
Mon Sep 26 15:49:16 CEST 2005 - jsrain@suse.cz

- added bootloader background picture for Alpha1
- do not install bootloader to MBR by default
- 2.13.0

-------------------------------------------------------------------
Fri Sep  9 17:11:10 CEST 2005 - jsrain@suse.cz

- activate the /boot partition if installing to ThinkPad (#116129)
- 2.12.32

-------------------------------------------------------------------
Fri Sep  9 15:16:39 CEST 2005 - jsrain@suse.cz

- propose GRUB's device map if the one which was read from the
  system is empty (#115936)
- 2.12.31

-------------------------------------------------------------------
Thu Sep  8 14:24:25 CEST 2005 - jsrain@suse.cz

- fixed reading GRUB location from configuration file (#115581)
- 2.12.30

-------------------------------------------------------------------
Wed Sep  7 15:30:04 CEST 2005 - jsrain@suse.cz

- load EDD module during proposal (and not during inst_finish, as
  it doesn't work if other than default kernel is used) (#115592)
- 2.12.29

-------------------------------------------------------------------
Wed Sep  7 13:05:32 CEST 2005 - jsrain@suse.cz

- install bootloader to MBR by default (except ThinkPads)
- load EDD module before running fix_chs script (#103031)
- import device map correctly during autoinstallation (#115327)
- 2.12.28

-------------------------------------------------------------------
Tue Sep  6 14:00:52 CEST 2005 - jsrain@suse.cz

- changed the count of boot floppies (#114959)
- run fix_chs on each partition which is marked active (#103031)
- update MBR on ThinkPads correctly (#114429)
- 2.12.27

-------------------------------------------------------------------
Tue Sep  6 10:55:16 CEST 2005 - jsrain@suse.cz

- changed the bootloader background (#115331)
- 2.12.26

-------------------------------------------------------------------
Fri Sep  2 12:00:28 CEST 2005 - jsrain@suse.cz

- added RC1 bootloader background
- 2.12.25

-------------------------------------------------------------------
Wed Aug 31 08:38:41 CEST 2005 - jsrain@suse.cz

- added ELILO support (for IA64)
- added basic ZIPL support (for S/390)
- 2.12.24

-------------------------------------------------------------------
Mon Aug 29 11:49:37 CEST 2005 - jsrain@suse.cz

- updated failsafe kernel parameters for i386/x86_64 (#113600)
- avoid reinitializing limal-bootloader before writing settings
  during update and in installed system (#113683)
- added support for booting on PPC
- 2.12.23

-------------------------------------------------------------------
Thu Aug 25 13:33:37 CEST 2005 - jsrain@suse.cz

- fixed setting the resume kernel parameter during update (#112794)
- do not add 'barrier=off' to failsafe kernel parameters (#112891)
- do not propose to install bootloader on XFS partition (#112810)
- 2.12.22

-------------------------------------------------------------------
Tue Aug 23 13:59:20 CEST 2005 - jsrain@suse.cz

- keep bootloader location during update (#105988)
- moved FixCHS to master-boot-code (#103031)

-------------------------------------------------------------------
Mon Aug 22 10:44:24 CEST 2005 - jsrain@suse.cz

- fixed creating new boot loader sections (#105668)
- 2.12.21

-------------------------------------------------------------------
Fri Aug 19 10:59:54 CEST 2005 - jsrain@suse.cz

- enhanced checking whether merged section is still valid (#74252)
- fix information about disk geometry in MBR if needed (#103031)
- 2.12.20

-------------------------------------------------------------------
Thu Aug 18 15:29:01 CEST 2005 - jsrain@suse.cz

- fixed new created XEN sections (#105171)
- do not install backup of stage1 if /boot is on XFS (#105483)
- 2.12.19

-------------------------------------------------------------------
Wed Aug 17 15:34:30 CEST 2005 - jsrain@suse.cz

- fixed detection whether bootloader can be installed if /boot is
  on MD (#104908)
- fixed comments for ycpdoc
- fixed proposing configuration if /boot is on MD (#104908)
- set correct initrd image for XEN (#105171)
- fixed errors in log while proposing loader type (#105152)
- don't remove initrd from merged loader sections (#104048)

-------------------------------------------------------------------
Mon Aug 15 16:10:00 CEST 2005 - jsrain@suse.cz

- merged texts from proofread
- 2.12.18

-------------------------------------------------------------------
Mon Aug 15 12:43:52 CEST 2005 - jsrain@suse.cz

- fixed section updates durng system update (#103868)
- 2.12.17

-------------------------------------------------------------------
Fri Aug 12 09:28:42 CEST 2005 - jsrain@suse.cz

- fixed several errors in code, added missign shortcuts

-------------------------------------------------------------------
Thu Aug 11 15:24:52 CEST 2005 - jsrain@suse.cz

- set correct parameters to failsafe kernel (#103865)
- fixed removing obsolete sections during update (#104039)

-------------------------------------------------------------------
Wed Aug 10 09:07:24 CEST 2005 - jsrain@suse.cz

- fixed changing the order of disks (#102964)

-------------------------------------------------------------------
Tue Aug  9 15:36:57 CEST 2005 - jsrain@suse.cz

- don't put 'splash=silent' twice to kernel command line (#102706)
- install bootloader to boot sector by default only if /boot
  partition is on the first disk (#100728)
- fixed modification of bootloader sections during installation
  (#102626)
- do not offer to edit sections if user selected not to install
  any bootloader (#102613)
- updated help text for bootloader location (#102626)
- fixed syntax of created lilo.conf (vga= cannot be in append)
  (#102942)
- displaying meaningful information for chainloader sections
  (#103008)
- 2.12.16

-------------------------------------------------------------------
Mon Aug  8 10:37:49 CEST 2005 - jsrain@suse.cz

- fixed importing settings during autoinstallation, avoiding crash
  (#102535)

-------------------------------------------------------------------
Thu Aug  4 15:40:52 CEST 2005 - jsrain@suse.cz

- fixed crash during autoinstallation
- do not offer GRUB and LILO on all architectures (#100219)
- 2.12.15

-------------------------------------------------------------------
Wed Aug  3 13:50:36 CEST 2005 - jsrain@suse.cz

- do not display additional kernel parameters in summary if no boot
  loader is selected to be installed (#100409)
- propose not to install bootloader if the available one is not
  supported (#100406)
- fixed widgets allignment

-------------------------------------------------------------------
Mon Aug  1 16:21:36 CEST 2005 - jsrain@suse.cz

- fixed capitalization in module summary
- added master-boot-code to RPM dependencies on i386/x86_64, as it
  is needed for the default installation
- 2.12.14

-------------------------------------------------------------------
Mon Aug  1 12:29:41 CEST 2005 - jsrain@suse.cz

- do not propose installing bootloader to MBR by default
- 2.12.13

-------------------------------------------------------------------
Thu Jul 28 16:15:45 CEST 2005 - jsrain@suse.cz

- merged texts from proofread
- 2.12.12

-------------------------------------------------------------------
Wed Jul 27 14:28:02 CEST 2005 - jsrain@suse.cz

- added option to enable/disable boot timeout
- fixed boot password setting
- location widget not shown if no loader is to be installed (#97888)
- 2.12.11

-------------------------------------------------------------------
Tue Jul 26 10:16:14 CEST 2005 - jsrain@suse.cz

- fixed GRUB menus merging
- 2.12.10

-------------------------------------------------------------------
Fri Jul 22 15:24:24 CEST 2005 - jsrain@suse.cz

- set correct root device to kernel command line (#97574)
- fixed installation on ThinkPad laptops (select the partition
  correctly) (#86762)
- 2.12.9

-------------------------------------------------------------------
Fri Jul 22 12:18:23 CEST 2005 - jsrain@suse.cz

- added last missing help texts
- several minor fixes
- updated to run correctly in Mode::config
- added autoinstallation support
- 2.12.8

-------------------------------------------------------------------
Thu Jul 21 10:08:27 CEST 2005 - jsrain@suse.cz

- added missing file to package
- added missing helps
- fixed retranslating boot menu during installation
- 2.12.7

-------------------------------------------------------------------
Mon Jul 18 13:26:43 CEST 2005 - jsrain@suse.cz

- fixed proposing and handling device map
- 2.12.6

-------------------------------------------------------------------
Mon Jul 18 08:42:16 CEST 2005 - jsrain@suse.cz

- fixed makefiles in order to pack all needed files
- added some help texts
- 2.12.5

-------------------------------------------------------------------
Fri Jul 15 15:48:47 CEST 2005 - jsrain@suse.cz

- adapted to new partitioner using storage-lib (arvin)
- fixed makefiles and nfb to build against limal-bootloader
- 2.12.4

-------------------------------------------------------------------
Tue Jul 12 13:03:23 CEST 2005 - jsrain@suse.cz

- more code cleanup

-------------------------------------------------------------------
Mon Jul 11 09:14:33 CEST 2005 - jsrain@suse.cz

- merged texts from proofread

-------------------------------------------------------------------
Fri Jul  1 16:52:05 CEST 2005 - jsrain@suse.cz

- created new UI
- accessing perl-Bootloader library through LiMaL instead of SCR

-------------------------------------------------------------------
Tue Jun 14 16:45:20 CEST 2005 - jsrain@suse.cz

- don't change MBR on IBM ThinkPad laptops in order to keep their
  rescue functionality working (#86762)
- 2.12.3

-------------------------------------------------------------------
Tue Jun  7 10:40:08 CEST 2005 - jsrain@suse.cz

- display info of additional kernel parameters from installation
  kernel command line (#83837)

-------------------------------------------------------------------
Mon May 23 17:20:27 CEST 2005 - jsrain@suse.cz

- fixed detection fo PReP partition on CHRP (PPC) (#80204)
- block proposal if bootloader noc configured correctly on PPC
  (#82893)

-------------------------------------------------------------------
Wed May  4 08:02:37 CEST 2005 - jsrain@suse.cz

- more "default" variable renames
- 2.12.2

-------------------------------------------------------------------
Tue May  3 12:35:05 CEST 2005 - jsrain@suse.cz

- select PReP boot partition on CHRP (PPC) if root on LVM (#80204)

-------------------------------------------------------------------
Wed Apr 27 08:27:43 CEST 2005 - jsrain@suse.cz

- allow to remap devices in GRUB section (#77119)
- don not report void error in installation proposal
- added bootloader-related part of inst_finish to extra client
- 2.12.1

-------------------------------------------------------------------
Fri Apr 22 13:17:27 CEST 2005 - mvidner@suse.cz

- Do not use "default" as an identifier.

-------------------------------------------------------------------
Mon Apr 18 16:00:36 CEST 2005 - jsrain@suse.cz

- updated for new interface of ProductFeatures.ycp
- 2.12.0

-------------------------------------------------------------------
Wed Mar 30 14:53:02 CEST 2005 - jsrain@suse.cz

- inform user in proposal if it is not possible to install
  bootloader due to partitioning (#71949)

-------------------------------------------------------------------
Thu Mar 24 13:36:48 CET 2005 - jsrain@suse.cz

- fixed bootfloppy icon description (#71084)

-------------------------------------------------------------------
Tue Mar 15 13:15:55 CET 2005 - jsrain@suse.cz

- fixed modification of bootloader configuration if installation
  fails during update (#72814)

-------------------------------------------------------------------
Mon Mar 14 09:48:35 CET 2005 - jsrain@suse.cz

- fixed manual configuration files editation (#72389)
- recreate grub.conf during update (#72361)

-------------------------------------------------------------------
Mon Mar  7 13:32:23 CET 2005 - jsrain@suse.cz

- added ZIPL installation via perl-Bootloader
- fixed the order of icons in bootfloppy creator

-------------------------------------------------------------------
Fri Mar  4 10:43:29 CET 2005 - jsrain@suse.cz

- propose XEN section if XEN and XEN kernels are installed/selected

-------------------------------------------------------------------
Thu Mar  3 18:20:39 CET 2005 - jsrain@suse.cz

- reverted to older version update_gfxmenu due to recent problems
  (#67288)

-------------------------------------------------------------------
Wed Mar  2 10:15:35 CET 2005 - jsrain@suse.cz

- merged texts from proofread

-------------------------------------------------------------------
Wed Mar  2 09:55:37 CET 2005 - jsrain@suse.cz

- fixed neverending loop in update_gfxmenu

-------------------------------------------------------------------
Tue Mar  1 10:34:51 CET 2005 - jsrain@suse.cz

- provide info about grub.conf to repair module if embedding
  GRUB stage1.5
- display proper list of bootloaders (#66933)
- limit the size of the /boot/message archive (#66878)

-------------------------------------------------------------------
Mon Feb 28 16:07:36 CET 2005 - jsrain@suse.cz

- fixed aborting during inst_finish (was crashing YaST)

-------------------------------------------------------------------
Fri Feb 25 14:43:58 CET 2005 - jsrain@suse.cz

- fixed identifying bootloader sections while reading (#66612)

-------------------------------------------------------------------
Fri Feb 25 09:05:14 CET 2005 - jsrain@suse.cz

- added missed translation mark (#8402)
- fixed testsuites
- enabled the bootfloppy icon also on AMD64
- disabled rescue floppy creation on other archs than i386
- 2.11.15

-------------------------------------------------------------------
Mon Feb 21 10:58:13 CET 2005 - jsrain@suse.cz

- use the new scripts for creating boot floppy (images are no
  longer on installation media)
- 2.11.14

-------------------------------------------------------------------
Thu Feb 17 12:14:22 CET 2005 - jsrain@suse.cz

- prevent from inserting language to the offer of boot menu twice
  (#50930)

-------------------------------------------------------------------
Wed Feb 16 13:54:34 CET 2005 - jsrain@suse.cz

- added support for embedding GRUB's stage 1.5
- 2.11.13

-------------------------------------------------------------------
Mon Feb 14 17:32:02 CET 2005 - jsrain@suse.cz

- by default don't merge whole GRUB menus, but only the default
  entry (#50688)
- fixed errors of the bootloader library if using LVM
- 2.11.12

-------------------------------------------------------------------
Thu Feb 10 14:51:08 CET 2005 - jsrain@suse.cz

- fixed errors when merging GRUB menus (#50643)

-------------------------------------------------------------------
Wed Feb  9 14:53:27 CET 2005 - jsrain@suse.cz

- stopped using multiple variables from ProductFeatures for
  creating kernel command line (#50369)
- 2.11.11

-------------------------------------------------------------------
Tue Feb  8 12:58:56 CET 2005 - jsrain@suse.cz

- fixed warning when removed memtest package after modifying
  memtest section in bootloader menu (#50498)

-------------------------------------------------------------------
Mon Feb  7 14:31:48 CET 2005 - jsrain@suse.cz

- merged texts from proofread
- 2.11.10

-------------------------------------------------------------------
Fri Feb  4 11:07:51 CET 2005 - jsrain@suse.cz

- getting additional kernel parameters as one string (#50369)

-------------------------------------------------------------------
Wed Feb  2 18:22:09 CET 2005 - jsrain@suse.cz

- fixed support for localized boot menu, allowed multiple languages
  to be used at once

-------------------------------------------------------------------
Tue Feb  1 21:39:12 CET 2005 - nashif@suse.de

- Disabled @YAST2-CHECKS-PROGRAM@ to fix build
- 2.11.9

-------------------------------------------------------------------
Mon Jan 31 17:32:32 CET 2005 - jsrain@suse.cz

- removed code obsolete after using the bootloader library
  (including the LILO agent)
- adapted to new filenames in GFX menu
- fixed handling of YaSTi's data in comments in configuration files
- by default merging all found GRUB menus
- clean-up of obsolete code
- 2.11.8

-------------------------------------------------------------------
Fri Jan 28 13:46:53 CET 2005 - jsrain@suse.cz

- export GRUB device map information to AutoYaST profile (#49730)

-------------------------------------------------------------------
Tue Jan 25 13:08:49 CET 2005 - jsrain@suse.cz

- adaptations to install properly on MD arrays
- 2.11.7

-------------------------------------------------------------------
Mon Jan 24 16:08:30 CET 2005 - jsrain@suse.cz

- added agent to interface for the bootloader library
- using the now bootloader library for GRUB and LILO configuration
- 2.11.6

-------------------------------------------------------------------
Tue Jan 11 16:43:52 CET 2005 - jsrain@suse.cz

- do not append 'maxcpus=0' to failsafe kernel command line on
  AMD64 (#49059)

-------------------------------------------------------------------
Thu Jan  6 14:14:23 CET 2005 - jsrain@suse.cz

- propose all present kernels for GRUB

-------------------------------------------------------------------
Wed Jan  5 17:10:56 CET 2005 - jsrain@suse.cz

- adapted to interface change of Kernel.ycp
- 2.11.5

-------------------------------------------------------------------
Wed Dec 15 13:13:58 CET 2004 - jsrain@suse.cz

- using new interface of Progress.ycp
- 2.11.4

-------------------------------------------------------------------
Mon Dec 13 18:15:29 CET 2004 - jsrain@suse.cz

- fixed setting GRUB password (#48999)

-------------------------------------------------------------------
Fri Nov 19 16:52:11 CET 2004 - jsrain@suse.cz

- removed the generic MBR code from the package (moved to
  master-boot-code package) (#46406)
- if user selects MBR of other than booting disk as location for
  GRUB, offer changing the order of the disks (#48051)
- 2.11.3

-------------------------------------------------------------------
Tue Nov  9 10:40:18 CET 2004 - jsrain@suse.cz

- fixed automatical boot partition activating during installation
  (#20329)

-------------------------------------------------------------------
Tue Nov  9 08:16:53 CET 2004 - jsrain@suse.cz

- enhanced memtest handling during installation (#46796)

-------------------------------------------------------------------
Mon Nov  8 13:23:42 CET 2004 - jsrain@suse.cz

- better fix of kernel image name update (#46750)

-------------------------------------------------------------------
Thu Nov  4 14:00:10 CET 2004 - jsrain@suse.cz

- removed select () and lookup () builtins usage
- fixed types for CWM
- 2.11.2

-------------------------------------------------------------------
Wed Oct 27 09:49:59 CEST 2004 - jsrain@suse.cz

- adapted to new Mode/Stage interface
- 2.11.1

-------------------------------------------------------------------
Tue Oct 19 13:59:33 CEST 2004 - jsrain@suse.cz

- use unified messages from Label.ycp
- changed boot floppy creator according to new layout of boot
  floppy disks (#43634)
- 2.11.0

-------------------------------------------------------------------
Wed Oct 13 12:44:42 CEST 2004 - jsrain@suse.cz

- add "thash_entries=2097152" to kernel command line on Altix
  Scalable Node (#44174)

-------------------------------------------------------------------
Mon Oct 11 16:09:03 CEST 2004 - jsrain@suse.cz

- adapted to new Arch:: interface

-------------------------------------------------------------------
Wed Oct  6 10:04:38 CEST 2004 - jsrain@suse.cz

- fixed summary if GRUB section name contains HTML tag (#46792)

-------------------------------------------------------------------
Tue Oct  5 12:55:53 CEST 2004 - jsrain@suse.cz

- replace blank spaces in LILO section name with underscores,
  shorten it if it is longer than 15 chars (#46778)
- 2.10.17

-------------------------------------------------------------------
Mon Oct  4 18:59:27 CEST 2004 - jsrain@suse.cz

- if serial parameter is present in menu.lst, don't add gfxboot
  during update (#46680)
- fixed update if root device name contained 'suse' or 'shipped'
  (#46750)
- 2.10.16

-------------------------------------------------------------------
Wed Sep 29 09:14:29 CEST 2004 - jsrain@suse.cz

- do not show the disks order if there is only one disk (#46346)
- 2.10.15

-------------------------------------------------------------------
Thu Sep 23 13:04:08 CEST 2004 - jsrain@suse.cz

- avoid initalizing GRUB structures earlier than needed data is
  known (#45119)
- fixed redrawing the main dialog if loader type changed (#45877)
- 2.10.14

-------------------------------------------------------------------
Mon Sep 20 16:30:38 CEST 2004 - jsrain@suse.cz

- fixes update if SATA devices are used (#44286)
- 2.10.13

-------------------------------------------------------------------
Mon Sep 13 10:59:50 CEST 2004 - jsrain@suse.cz

- allowed to add wildcard entry to GRUB and LILO boot menu (#44742)
- removed dead code (related to items in GRUB section reordering,
  now it is fully handled by Table/Popup
- initialize package manager callbacks before getting boot floppy
  image (in order to ask for media) (#45049)
- prevent from displaying the target device in the summary
  multiple times (#45119)
- 2.10.12

-------------------------------------------------------------------
Tue Sep  7 10:09:14 CEST 2004 - jsrain@suse.cz

- update the default boot section mark properly if a section was
  removed (eg. because of missing kernel) (#44752)

-------------------------------------------------------------------
Mon Sep  6 13:56:56 CEST 2004 - jsrain@suse.cz

- do not use obsolete include commandline/commandline.ycp

-------------------------------------------------------------------
Mon Sep  6 09:44:33 CEST 2004 - jsrain@suse.cz

- avoid calling constructor of Product:: in testsuite (in order to
  build properly)
- save splash type from installation kernel command line to created
  bootloader configuration files (#44683)
- 2.10.11

-------------------------------------------------------------------
Fri Sep  3 13:16:28 CEST 2004 - jsrain@suse.cz

- update devices in bootloader configuration files (SATA devices
  changed from /dev/hd* to /dev/sd*) (#44286)
- provide general Bootloader::Update function that processes all
  needed tasks
- added SetModified to _auto client
- 2.10.10

-------------------------------------------------------------------
Thu Sep  2 13:03:07 CEST 2004 - jsrain@suse.cz

- check dependencies of bootloader-related packages when selecting
  them for installation (#44615)

-------------------------------------------------------------------
Wed Sep  1 08:59:59 CEST 2004 - jsrain@suse.cz

- fixed proposing /etc/grub.conf if /boot is on /dev/md*

-------------------------------------------------------------------
Tue Aug 31 16:46:46 CEST 2004 - jsrain@suse.cz

- fixed building on other archs than i386
- 2.10.9

-------------------------------------------------------------------
Tue Aug 31 14:43:04 CEST 2004 - jsrain@suse.cz

- branched yast2-bootfloppy package (so that the bootfloppy
  functionality is not present in personal as floppy images are
  not present on the media (#44163)
- 2.10.8

-------------------------------------------------------------------
Mon Aug 30 05:19:51 CEST 2004 - nashif@suse.de

- Added GetModified function to _auto client

-------------------------------------------------------------------
Thu Aug 19 12:40:11 CEST 2004 - jsrain@suse.cz

- translate the "Vendor Diagnostic" section in bootloader menu
- removed some unneeded impmorts
- 2.10.7

-------------------------------------------------------------------
Tue Aug 17 11:27:21 CEST 2004 - jsrain@suse.cz

- fixed signatures of handler functions of Table/Popup options
- call efibootmgr with '-v' instead of '-q' (in order to have more
  verbose output in log) (#43625)

-------------------------------------------------------------------
Mon Aug 16 11:16:44 CEST 2004 - jsrain@suse.cz

- fixed printing of summary if location set to all MBRs of disks
  holding the /boot partition on /dev/md*
- fixed activating partitions and writing generic code to MBR if
  installing on /dev/md*
- work correctly with kernel image names also on other archs than
  i386 when creating the previous kernel section
- 2.10.5

-------------------------------------------------------------------
Fri Aug 13 14:55:49 CEST 2004 - jsrain@suse.cz

- log the output of devmap_mknod.sh and /sbin/vgscan (#43758)

-------------------------------------------------------------------
Wed Aug 11 12:50:06 CEST 2004 - jsrain@suse.cz

- prevent from adding trailing blank space to section name on PPC
  (#43599)

-------------------------------------------------------------------
Tue Aug 10 09:15:42 CEST 2004 - jsrain@suse.cz

- merged texts from proofread

-------------------------------------------------------------------
Mon Aug  9 10:25:27 CEST 2004 - jsrain@suse.cz

- fixed crippling of sections of other distros in case of multiboot
  (#43491)
- add 'd' to GRUB installation command only if 1st and 2nd stage
  are on different disks (#43198)
- 2.10.4

-------------------------------------------------------------------
Fri Aug  6 13:19:45 CEST 2004 - jsrain@suse.cz

- minor fixes that made autoinstallation work

-------------------------------------------------------------------
Wed Aug  4 10:10:40 CEST 2004 - jsrain@suse.cz

- more type information for CWM structures
- fixed testsuite
- 2.10.3

-------------------------------------------------------------------
Mon Jul 26 12:58:55 CEST 2004 - jsrain@suse.cz

- fixed routine of merging detected modules for initrd with those
  present in the AI profile during autoinstallation (#43103)

-------------------------------------------------------------------
Mon Jul 19 12:50:24 CEST 2004 - jsrain@suse.cz

- use PackageSystem.ycp modules instead of Require.ycp
- import "Product.ycp" when it is really needed (in order to build)
- 2.10.2

-------------------------------------------------------------------
Fri Jul 16 15:53:09 CEST 2004 - jsrain@suse.cz

- fixed displaying and changing order of disks for GRUB (#42454)
- displaying GRUB's disks order in the summary

-------------------------------------------------------------------
Mon Jul 12 14:27:25 CEST 2004 - jsrain@suse.cz

- writing product name and version as section label to bootloader
  menu (GRUB both text and graphical, lilo graphical) (#31250)
- fixed error messages of the script for /boot/message recreating
- added general function to recreate /boot/message file on
  relevant architectures
- 2.10.1

-------------------------------------------------------------------
Tue Jun 29 13:45:04 CEST 2004 - jsrain@suse.cz

- added possibility to install GRUB on MD device (the way that if
  any of the disks building MD is removed system still boots)
- update zipl.conf before packages update on S390 (#40629)
- added "barrier=off" to failsafe kernel command line on i386, IA64
  and AMD64 (#42526)

-------------------------------------------------------------------
Fri Jun 25 15:36:31 CEST 2004 - jsrain@suse.cz

- added functionality to add section with previous kernel (#36624)
- fixed confusing labels for the boot floppies (#37094)
- fixed confusing code in Bootloader::Write (#40445)

-------------------------------------------------------------------
Thu Jun 24 13:29:08 CEST 2004 - jsrain@suse.cz

- fixed autoinstallation with empty bootloader-related part of the
  AI profile on PPC and IA64 (#41805)

-------------------------------------------------------------------
Thu Jun 17 15:00:57 CEST 2004 - jsrain@suse.cz

- 2.10.0

-------------------------------------------------------------------
Wed Jun 16 14:11:03 CEST 2004 - jsrain@suse.cz

- prevent the "desktop" parameter from being added to kernel
  command line for server products (#41916)
- 2.9.31

-------------------------------------------------------------------
Thu Jun 10 11:36:30 CEST 2004 - jsrain@suse.cz

- change /dev/hd* to /dev/iseries/vd* in the 'boot' option of
  lilo.conf during update of iSeries (#41545)
- fixed creating a new section on PPC and IA64 (#41550)
- 2.9.30

-------------------------------------------------------------------
Sun Jun  6 01:59:50 CEST 2004 - nashif@suse.de

- in autoinst mode, keep initrd modules list (#41681)

-------------------------------------------------------------------
Thu May 27 16:35:45 CEST 2004 - jsrain@suse.cz

- don't display device name if user selected to activate boot
  loader partition ot replace MBR with generic code when preparing
  AutoYaST  profile, as the device names aren't known (#41258)
- allow to install LILO to MD so that if any of disks bulding MD
  array is removed, system still boots (#34122)
- 2.9.29

-------------------------------------------------------------------
Thu May 27 02:38:48 CEST 2004 - nashif@suse.de

- move conversion functions from bootloader_auto to external
  file (#41227)
- Also parse kernel parameters, moved from autoyast2 (#41227)

-------------------------------------------------------------------
Wed May 26 14:31:44 CEST 2004 - jsrain@suse.cz

- fix autoinstallation on all PPC boards (#38991)
- prefer proposed PReP boot partition to already existing (#41213)

-------------------------------------------------------------------
Tue May 25 14:27:40 CEST 2004 - jsrain@suse.cz

- set the I/O scheduler on the kernel command line (#40688)
- fixed bootloader installation on iSeries (jplack) (#41143)
- 2.9.28

-------------------------------------------------------------------
Mon May 24 12:55:15 CEST 2004 - jsrain@suse.cz

- avoid setting vga kernel parameter on PPC and S390 (#40998)
- fixed messing of /etc/lilo.conf when setting the vga parameter
  (#40998)

-------------------------------------------------------------------
Wed May 19 15:06:52 CEST 2004 - jsrain@suse.cz

- fixed filter for possible PReP boot partitions on iSeries - allow
  /dev/iseries/vd* instead of /dev/hd* (#40825)
- 2.9.27

-------------------------------------------------------------------
Tue May 18 13:30:07 CEST 2004 - jsrain@suse.cz

- init board type during autoinstallation on PPC properly (#38991)

-------------------------------------------------------------------
Thu May 13 17:54:54 CEST 2004 - jsrain@suse.cz

- fixed installation on PPC (#34556)
- 2.9.26

-------------------------------------------------------------------
Wed May 12 08:29:20 CEST 2004 - jsrain@suse.cz

- use ELILO-specific entry for the EFI entry label in the
  autoinstallation profile (#36061)
- fix handling of multiple occurences of a kernel parameter in the
  command line (used eg. for console) (#38177)
- fix lilo.conf update on PPC (#39379)

-------------------------------------------------------------------
Tue May  4 09:02:47 CEST 2004 - jsrain@suse.cz

- merged texts from proofread

-------------------------------------------------------------------
Tue May  4 07:58:45 CEST 2004 - jsrain@suse.cz

- add 'selinux=0' kernel parameter for all archs (#39811)
- add 'TERM=dumb' kernel parameter for S390 (#39386)
- 2.9.25

-------------------------------------------------------------------
Tue Apr 27 09:28:42 CEST 2004 - jsrain@suse.cz

- fixed script for updating /boot layout on IPF (#21644)
- fixed the /boot layout update procedure (#21644)
- do not change the EFI nvram on update (#21644)
- fixed testsuite
- 2.9.24

-------------------------------------------------------------------
Thu Apr  8 14:28:19 CEST 2004 - jsrain@suse.cz

- use 'desktop' kernel parameter on desktop products only
- fixed blank spaces in section name after conversion from GRUB to
  LILO (#38017)
- fixed installing rescue kernel to slot A on iSeries (PPC) during
  installation (#35566)

-------------------------------------------------------------------
Wed Apr  7 18:28:02 CEST 2004 - sh@suse.de

- Fixed excessive whitespace after Module:: - bug #38327

-------------------------------------------------------------------
Wed Apr  7 00:00:47 CEST 2004 - schwab@suse.de

- Add nohalt to failsafe kernel command line on ia64.

-------------------------------------------------------------------
Tue Apr  6 09:01:01 CEST 2004 - jsrain@suse.de

- updating graphical boot menu to contain proper languages (and 
  be small enough to fit in memory) also when running update from
  YaST control center (#38339)
- added 'noresume' parameter to failsafe kernel command line
  (#38400)
- 2.9.22

-------------------------------------------------------------------
Mon Apr  5 15:23:21 CEST 2004 - jsrain@suse.de

- fixed installation if root is on LVM (initializing device mapper
  and LVM properly) (#37290)
- 2.9.21

-------------------------------------------------------------------
Fri Apr  2 15:59:41 CEST 2004 - jsrain@suse.de

- changed license to GPL
- 2.9.20

-------------------------------------------------------------------
Fri Apr  2 09:39:47 CEST 2004 - jsrain@suse.de

- fixed reading and writing of the 'map' option of sections in the
  GRUB's menu.lst (#37971)
- again fixed PPC post-install script (#37262)
- 2.9.19

-------------------------------------------------------------------
Tue Mar 30 17:44:53 CEST 2004 - schwab@suse.de

- Use dev2majminIfNonStandard instead of dev2majmin in BootELILO.
- 2.9.18

-------------------------------------------------------------------
Mon Mar 29 18:16:56 CEST 2004 - jsrain@suse.de

- do not propose to install any bootloader if installing user-mode
  Linux (#37382)

-------------------------------------------------------------------
Mon Mar 29 10:30:31 CEST 2004 - jsrain@suse.de

- fixed errors in log if root on LVM (#37290)
- adapted to changes in CWM
- include desktop file for boot floppy disk creator on i386 only
  (#37209)
- write "lilo" as bootloader type to sysconfig on PPC (#37263)
- do not report incorrect error of PPC bootloader post-install
  script (#37262)
- label the bootloader section on PPC 'linux' (lowercase 'l')
  (#37264)
- do not ask about aborting if just entered and left (#37099)
- write correct kernel to slot A on iSeries (PPC) when configuring
  installed system (#35566)
- 2.9.17

-------------------------------------------------------------------
Fri Mar 26 10:03:50 CET 2004 - jsrain@suse.de

- check for nil output of runnign bootloader installer (#36927)
- avoid displaying reading progress while updating configuraiton
- 2.9.16

-------------------------------------------------------------------
Thu Mar 25 11:43:52 CET 2004 - jsrain@suse.de

- fixed behavior if installing bootloader to boot sector of
  MD device (#34122)
- do not update graphical boot menu if it is not installed (#36893)
- 2.9.15

-------------------------------------------------------------------
Wed Mar 24 15:33:24 CET 2004 - jsrain@suse.cz

- fixed installation when root is on LVM device
- prepared for EVMS (handle it the same way as LVM)

-------------------------------------------------------------------
Tue Mar 23 12:54:11 CET 2004 - jsrain@suse.cz

- warn user before installing on XFS partition (boot sector doesn't
  have enough free space for containing boot loader) (#36708)

-------------------------------------------------------------------
Mon Mar 22 08:47:51 CET 2004 - jsrain@suse.cz

- logging output of PPC postinstall script (#35833)
- fixed handling of NoPCMCIA kernel parameter (#35674)
- check if language is supported by gfxmenu before setting it as
  default (#36487)
- 2.9.14

-------------------------------------------------------------------
Fri Mar 19 14:55:58 CET 2004 - mvidner@suse.cz

- added AGENT_LIBADD so that agents work from standalone Perl

-------------------------------------------------------------------
Thu Mar 18 10:44:48 CET 2004 - jsrain@suse.cz

- mark settings as changed after bootloader switch (#36269)
- avoid putting /dev/evms to GRUB's device map and allowing it as
  device to install bootloader to
- create only one entry in the language selection in graphical
  boot menu if English selected

-------------------------------------------------------------------
Wed Mar 17 14:27:15 CET 2004 - jsrain@suse.cz

- allowed to select PPC board type when preparing autoinstallation
  (#36109)
- not reading settings from disk in Mode::config if not explicitly
  asked
- correctly assigning default radio button when asking how to
  switch bootloader
- zipl (S390 loader) switched to Table/Popup interface with just
  one entry (loader type) because of autoinstallation

-------------------------------------------------------------------
Tue Mar 16 08:17:09 CET 2004 - jsrain@suse.cz

- allow selecting all boot loaders in autoinstallation
  configuration (#36109)
- correctly display in summary that no EFI entry will be created
  on IA64 (#35346)
- export global settings of the bootloader properly (#32384,
  #36012)
- support for having both /boot/initrd and (hdx,y)/initrd in
  autoinstallation profile (#32384)
- fixed storing of the gfxmenu option

-------------------------------------------------------------------
Mon Mar 15 12:58:34 CET 2004 - jsrain@suse.cz

- correctly check for swap partitions (filter out the partitions
  that are marked for getting deleted) (#35953)
- avoid writing LILO to /dev/md? (use one of devices building the
  array instead) (#33565)
- prevent kernel options from being added multiple times (#32362)
- 2.9.13

-------------------------------------------------------------------
Fri Mar 12 10:14:26 CET 2004 - jsrain@suse.de

- setting the default language of graphical boot loader, adding
  localized texts
- added support for boot loader entries with diacritics in
  graphical bootloader menu
- creating /boot/zipl directory on S390 (#35662)
- 2.9.12

-------------------------------------------------------------------
Wed Mar 10 10:28:41 CET 2004 - jsrain@suse.de

- adapted boot disks creator to new floppy image names (#33675)

-------------------------------------------------------------------
Wed Mar 10 02:06:47 CET 2004 - sh@suse.de

- V 2.9.11
- Migration to new wizard

-------------------------------------------------------------------
Tue Mar  9 12:44:48 CET 2004 - jsrain@suse.de

- fixed creating floppy from image with size smaller than the disk
  size (#33675)

-------------------------------------------------------------------
Mon Mar  8 08:45:50 CET 2004 - jsrain@suse.de

- fixed post install script on PPC (#35436)
- fixed testsuite
- ask user before aborting
- setting icon
- 2.9.10

-------------------------------------------------------------------
Thu Mar  4 10:30:52 CET 2004 - jsrain@suse.de

- storing vga value determined during installation, using it when
  proposing new configuration in installed system (#33368)
- preserving user's choce not to create EFI entry while running
  through installation proposal (#35346)

-------------------------------------------------------------------
Wed Mar  3 09:27:42 CET 2004 - jsrain@suse.de

- appending text '(MBR)' to bootloader location description if it
  is MBR of a hard disk (#35255)
- fixed exporting settings for autoinstallation (#35232)
- log exit code of command used to install bootloaer in case of
  failure
- fixed incorrectly reported error when installing LILO (#33905)
- made md-only installation of GRUB possible (#34122)

-------------------------------------------------------------------
Tue Mar  2 11:05:50 CET 2004 - jsrain@suse.de

- finished making data types more strictly
- fixed default section name in lilo.conf on PPC (#35229)

-------------------------------------------------------------------
Mon Mar  1 12:48:34 CET 2004 - jsrain@suse.de

- merged texts from proofread
- more strictly data types (still WIP)
- 2.9.8

-------------------------------------------------------------------
Tue Feb 24 08:31:10 CET 2004 - jsrain@suse.de

- removing ide-scsi emulation parameters from kernel command line
  (#34694)
- use PReP boot partition on the same disk as root partition on
  chrp (PPC) (#34891)
- updated ELILO installation, change partitioning layout during
  ELILO update in order to match Intel's EFI specification (#21644)

-------------------------------------------------------------------
Mon Feb 23 12:39:36 CET 2004 - jsrain@suse.de

- fixed used kernel image name on S390 (now using the one from
  Kernel.ycp) (#34735)
- fixed kernel command line on S390 (#34734)
- 2.9.7

-------------------------------------------------------------------
Thu Feb 19 11:27:28 CET 2004 - jsrain@suse.de

- removed yast2-country from neededforbuild
- writing hardware configuration to sysconfig on S390 instead of
  /etc/chandev

-------------------------------------------------------------------
Tue Feb 17 08:50:18 CET 2004 - jsrain@suse.de

- enabled and fixed command line interface
- properly updating proposed sections of LILO after disk
  repartitioning

-------------------------------------------------------------------
Mon Feb 16 15:12:38 CET 2004 - jsrain@suse.de

- fixed behavior during autoinstalation preparation
- fixed selectin PReP boot partition for installation on PPC (#34570)
- fixed return value of Import function
- fixed text of MBR radio button in AI configuration mode
- keeping corrupted sections in lilo.conf on PPC (#34588)
- 2.9.6

-------------------------------------------------------------------
Tue Feb 10 19:56:37 CET 2004 - arvin@suse.de

- fixed testsuite

-------------------------------------------------------------------
Sat Feb 07 20:47:15 CET 2004 - arvin@suse.de

- removed config files (*.y2cc)
- 2.9.4

-------------------------------------------------------------------
Fri Jan 30 08:15:37 CET 2004 - jsrain@suse.de

- dropped SILO support (SILO was dropped as SPARC is dead)
- reenabled (and fixed) testsuite
- 2.9.3

-------------------------------------------------------------------
Fri Jan 16 15:43:46 CET 2004 - jsrain@suse.de

- merged NI changes from branch
- 2.9.2

-------------------------------------------------------------------
Mon Jan  5 11:32:29 CET 2004 - jsrain@suse.de

- adding resume= kernel parameter for GRUB and LILO (#33640)
- writing kernel append parameters to global section of elilo.conf
  (IA64) (#31736)

-------------------------------------------------------------------
Wed Dec 10 14:55:12 CET 2003 - jsrain@suse.de

- translating also section label in the "default" entry in
  elilo.conf (IA64)

-------------------------------------------------------------------
Tue Dec  9 15:36:47 CET 2003 - jsrain@suse.de

- added command line interface support

-------------------------------------------------------------------
Thu Nov 27 17:20:19 CET 2003 - jsrain@suse.de

- fixes for the new interpreter
- 2.9.1

-------------------------------------------------------------------
Mon Nov 24 18:24:47 CET 2003 - jsrain@suse.de

- fixed changing of GRUB location (#33297)
- updated support of ELILO, several fixes

-------------------------------------------------------------------
Tue Nov 18 13:45:02 CET 2003 - jsrain@suse.de

- switched from kdoc to doxygen

-------------------------------------------------------------------
Thu Oct 30 17:49:22 CET 2003 - jsrain@suse.de

- fixed handling of disks reorder dialog for GRUB configuration
- fixed modifying configuration data according to changed GRUB's
  device map (#32667)

-------------------------------------------------------------------
Wed Oct 29 10:07:20 CET 2003 - jsrain@suse.de

- fixed ensuring that required packages are installed when
  switching bootloader
- fixed sorting of lines in table
- 2.9.0

-------------------------------------------------------------------
Thu Oct 23 18:16:32 CEST 2003 - schwab@suse.de

- Fix quoting in efibootmgr command line.

-------------------------------------------------------------------
Thu Oct 23 12:50:39 CEST 2003 - jsrain@suse.de

- fixed routines used to modify parameters of specified kernel

-------------------------------------------------------------------
Fri Oct 17 11:13:36 CEST 2003 - jsrain@suse.de

- not proceeding with creating boot floppy if image not found
  (#32428)

-------------------------------------------------------------------
Wed Oct 15 16:27:26 CEST 2003 - jsrain@suse.de

- fixed option type for relocatable in elilo.conf (IA64) (#32210)
- fixed option type of "activate" option on PPC
- fixed handling of doublieclick on sections list table
- updated support of IA64 bootloader

-------------------------------------------------------------------
Tue Oct 14 18:08:02 CEST 2003 - jsrain@suse.de

- updated support of S390 bootloader

-------------------------------------------------------------------
Mon Oct 13 10:45:18 CEST 2003 - jsrain@suse.de

- updated support of PPC bootloader

-------------------------------------------------------------------
Mon Oct  6 16:53:52 CEST 2003 - jsrain@suse.de

- added separate fillup templates for different architectures

-------------------------------------------------------------------
Fri Oct  3 14:59:17 CEST 2003 - jsrain@suse.de

- changed internals so that bootloader module now uses CWM

-------------------------------------------------------------------
Mon Sep 22 13:54:59 CEST 2003 - jsrain@suse.de

- fixed assigning of default section when changed default secion's
  label in LILO (#30122)
- 2.8.22

-------------------------------------------------------------------
Fri Sep 19 16:47:07 CEST 2003 - jsrain@suse.de

- fixed testsuite (again)
- 2.8.21

-------------------------------------------------------------------
Thu Sep 18 23:08:24 CEST 2003 - nashif@suse.de

- Fixed testsuite
- 2.8.20

-------------------------------------------------------------------
Thu Sep 18 10:29:15 CEST 2003 - jsrain@suse.de

- again adding maxcpus=0 to failsafe bootloader entry on AMD64
  (#30519)
- fixed possibily missing "splash=silent" in default kernel's
  command line (#31256)
- 2.8.19

-------------------------------------------------------------------
Tue Sep 16 16:51:28 CEST 2003 - jsrain@suse.de

- fixed merging of other GRUB menus (#30757)
- fixed translating of menubutton entry during installation (#31054)
- 2.8.18

-------------------------------------------------------------------
Mon Sep 15 17:44:56 CEST 2003 - jsrain@suse.de

- fixed popup reporting error when creating initrd (#30714)
- fixed detection if root kernel parameter is specified via major
  and minor number (#30842)
- adding only one "splash=silent" to kernel command line (#30860)
- adding "splash=silent desktop" to kernel command line during
  update (#28780)
- propose "floppy" entry to bootloader menu only if floppy drive
  is present (#30772)
- don't install bootloader packages in repair mode (#30272)
- 2.8.17

-------------------------------------------------------------------
Sun Sep 14 21:02:56 CEST 2003 - adrian@suse.de

- make it working in kcontrol

-------------------------------------------------------------------
Fri Sep 12 08:17:22 CEST 2003 - jsrain@suse.de

- not adding maxcpus=0 to failsafe kernel parameters on AMD64
  (#30519)
- fixed updating of kernel image name in bootloader configuration
  files (#30627)
- fixed original bootloader configuration reading during update
  (#30625)

-------------------------------------------------------------------
Thu Sep 11 12:46:41 CEST 2003 - jsrain@suse.de

- removed forgotten debug code (#30396)

-------------------------------------------------------------------
Wed Sep 10 08:13:04 CEST 2003 - jsrain@suse.de

- fixed update of metadata for sysconfig variable LOADER_TYPE
  (#30352)

-------------------------------------------------------------------
Mon Sep  8 09:18:48 CEST 2003 - jsrain@suse.de

- fixed bootloader menu entry - windows -> Windows (like other
  entries) (#29600)
- use device file name when specifying root device for LVM and MD
  instead of using major and minor number (#28028)
- prefix 0x should be added to major/minor number identifying root
  device only for LILO (#29776)
- 2.8.15

-------------------------------------------------------------------
Fri Sep  5 15:10:35 CEST 2003 - jsrain@suse.de

- merged texts from proofread
- fixed configuration proposal when root or boot partition is on md
  (#30122)
- 2.8.14

-------------------------------------------------------------------
Thu Sep  4 12:37:04 CEST 2003 - jsrain@suse.de

- if variable with list of initrd modules in sysconfig doesn't
  exist, set default value to empty (#30020)

-------------------------------------------------------------------
Wed Sep  3 13:34:51 CEST 2003 - jsrain@suse.de

- don't write 'single' to slot A kernel command line on IBM iSeries
  (arch. PPC) (#27984) (olh@suse.de)

-------------------------------------------------------------------
Mon Sep  1 10:04:55 CEST 2003 - jsrain@suse.de

- fixed bootloader installation with numeric (major-minor) root
  device specification (#29776)
- not proposing booting from floppy if /boot is beyond 1024 cylinder
  as it doesn't solve anything (#29524)
- 2.8.13

-------------------------------------------------------------------
Thu Aug 28 14:20:10 CEST 2003 - jsrain@suse.de

- fixed displayed section type in sections summary dialog for
  "other" sections (#29472)
- don't ask for abort confirmation during installation if settings
  were changed in previous run of component from proposal (#29496)
- 2.8.12

-------------------------------------------------------------------
Mon Aug 25 10:00:10 CEST 2003 - jsrain@suse.de

- fixed inconsistence of floppy size (1440kB -> 1.44 MB) (#29142)
- reporting segmentation fault when running bootloader binary
  (#29199)
- added correct help for configuration writing dialog
- improved help text for rescue floppy (#29143)
- 2.8.11

-------------------------------------------------------------------
Mon Aug 18 09:20:32 CEST 2003 - jsrain@suse.de

- fixed creating of boot floppy (#28994)
- updated comments in susconfig fillup (#28845)
- moved dir for backup MBR to /var/lib/YaST2, in /boot leaving just
  last MBR (this way it can be inserted to GRUB menu) (#28802)
- backup-ing areas really affected when saving bootloader
  configuration (MBR of first disk and sector bootloader is
  installed to) (#28803)
- 2.8.10

-------------------------------------------------------------------
Wed Aug 13 14:07:32 CEST 2003 - jsrain@suse.de

- fixed bootloader update
- better comments around YaST2 metadata in generated cfg. files
- 2.8.9

-------------------------------------------------------------------
Tue Aug 12 13:29:35 CEST 2003 - jsrain@suse.de

- added support for not installing any bootloader
- recreate reset menubutton after bootloader switch
- updated update functionality (replace vmlinuz.shipped images with
  vmlinuz, dtto for initrd)

-------------------------------------------------------------------
Mon Aug 11 09:33:26 CEST 2003 - jsrain@suse.de

- not using .shipped image any more (kernel package doesn't contain
  it)
- merged texts from proofread
- added more verbose logging of proposing configuration
- 2.8.8

-------------------------------------------------------------------
Thu Aug  7 15:46:44 CEST 2003 - jsrain@suse.de

- fixed lost sections when changhing bootloader location (#28552)
- not offering to replace partition booting from HDD with partition
  for booting from floppy when changed GRUB location to other disk
  partition if entry for booting from HDD doesn't exist
- fixed proposing of LILO configuration (put multiple times into
  quotes, some options weren't displayed correctly in summary table)
- fixed lost sections in many other cases
- removed popup informing about changed disk partitioning although
  it was unchanged during installation proposal
- 2.8.7

-------------------------------------------------------------------
Mon Aug  4 15:56:18 CEST 2003 - jsrain@suse.de

- added .desktop files
- 2.8.6

-------------------------------------------------------------------
Thu Jul 31 09:29:28 CEST 2003 - jsrain@suse.de

- don't offer extra /boot and / partition as bootloader location
  if they are the same

-------------------------------------------------------------------
Tue Jul 29 08:28:53 CEST 2003 - jsrain@suse.de

- added possibility to clone selected bootloader section (#26458)
- fixed creation of lilo.conf - quotes were missing
- entries to bootloader are to be translated (#26800)

-------------------------------------------------------------------
Wed Jul 23 09:04:04 CEST 2003 - jsrain@suse.de

- Using major/minor number for unusual devices instead of device
  node name in root kernel parameter (#28028)

-------------------------------------------------------------------
Mon Jul 21 17:00:59 CEST 2003 - jsrain@suse.de

- double click on tables now triggers Edit (#25156)
- fixed testuite and building
- 2.8.5

-------------------------------------------------------------------
Tue Jul  8 16:35:47 CEST 2003 - jsrain@suse.de

- fixed question popup if canceling configuration (#27479)
- installing additional copy of bootloader bootsector to bootsector
  of /boot partition for LILO and GRUB (#27389)
- not activating any partition by default if some already active
  (#26278)
- 2.8.4

-------------------------------------------------------------------
Wed Jun 25 10:11:41 CEST 2003 - jsrain@suse.de

- fixed several minor bugs
- 2.8.3

-------------------------------------------------------------------
Mon Jun 23 14:09:14 CEST 2003 - jsrain@suse.de

- fixed common_popups, common_messages -> YCP modules
- fixed missing imports
- 2.8.2

-------------------------------------------------------------------
Thu Jun 12 13:03:52 CEST 2003 - jsrain@suse.de

- fixed file list
- fixed user interface
- 2.8.1

-------------------------------------------------------------------
Wed May 28 15:00:47 CEST 2003 - jsrain@suse.de

- updated PPC bootloader support

-------------------------------------------------------------------
Fri May 16 09:09:46 CEST 2003 - jsrain@suse.de

- fixed collision with driver update (#26717)

-------------------------------------------------------------------
Thu May 15 14:27:25 CEST 2003 - jsrain@suse.de

- updated ELILO (IA64 bootloader) support

-------------------------------------------------------------------
Mon May  5 16:38:39 CEST 2003 - jsrain@suse.de

- updated and optimized some internal structures and related
  functions

-------------------------------------------------------------------
Thu Apr 24 11:19:57 CEST 2003 - jsrain@suse.de

- updated doaboot script (ro@suse.de)

-------------------------------------------------------------------
Wed Apr 23 13:12:31 CEST 2003 - jsrain@suse.de

- updated widget handling functions interface
- updated documentation

-------------------------------------------------------------------
Tue Apr 22 09:57:55 CEST 2003 - jsrain@suse.de

- added possibility to download boot floppy image via FTP/HTTP
  (#26175)
- added possibility to restore last MBR saved during isntallation
  or bootloader configuration (#16338)

-------------------------------------------------------------------
Fri Apr 18 13:18:24 CEST 2003 - jsrain@suse.de

- no more retaking current kernel parameters to bootloader
  configuration file when configuring installed system (#26304)
- fixed devices for MBR/boot partition/root/partition when
  installing on md (#26287)
- not activating any partition during update (#26323)
- better checkign of bootloader-on-floppy installation (#26323)
- in case of inconsistence between sysconfig and bootlaoder cfg.
  file bootloader cfg.file is prefered (#26323)
- fixed possible tmp filename security problem of installation
  on AXP (#26357)
- displaying partition that will be activated and MBR device that
  will be replaced with generic code (partial fix of #26278)
- added possibility to save MBR before bootloader installation and
  insert saved MBR image to GRUB menu (#16338)
- 2.8.0

-------------------------------------------------------------------
Tue Apr  8 09:12:41 CEST 2003 - jsrain@suse.de

- added possibility to save all settings and reinstall bootloader
  although nothing was changed (#24346)

-------------------------------------------------------------------
Fri Apr  4 16:27:36 CEST 2003 - jsrain@suse.de

- code cleanup and optimalization
- added bootloader parameters support, made routines more universal
- documentation update

-------------------------------------------------------------------
Thu Apr  3 17:50:50 CEST 2003 - jsrain@suse.de

- allowed bootfloppy to format floppy disk and select device
- allowed bootfloppy to use custom image (22376)
- other minor bootfloppy updates and code cleanup

-------------------------------------------------------------------
Mon Mar 24 12:07:34 CET 2003 - jsrain@suse.de

- removed reading of initrd modules from install_inf (#24709)

-------------------------------------------------------------------
Fri Mar 21 14:44:31 CET 2003 - jsrain@suse.de

- updated documentation
- updated testsuite
- several minor updates and optimalizations

-------------------------------------------------------------------
Tue Mar 18 13:09:02 CET 2003 - jsrain@suse.de

- fixed undeclared variable title (#25560)
- 2.7.19

-------------------------------------------------------------------
Mon Mar 17 14:24:01 CET 2003 - jsrain@suse.de

- fixed displaying of logs on bootloader errors (#25470)
- 2.7.18

-------------------------------------------------------------------
Mon Mar 17 09:41:07 CET 2003 - jsrain@suse.de

- fixed updating GRUB configuration if entry with other system was
  present and set as default (#25418)
- 2.7.17

-------------------------------------------------------------------
Fri Mar 14 13:26:39 CET 2003 - jsrain@suse.de

- fixed behaviour when iditing empty section, when creating new
  section, add most common keys (#25305)
- fixed initrd modules cloning (#25351)
- 2.7.16

-------------------------------------------------------------------
Tue Mar 11 12:55:43 CET 2003 - jsrain@suse.de

- using activate instead of sfdisk to activate bootloader
  partition, because sfdisk has unwanted side effects (#24740)
- 2.7.15

-------------------------------------------------------------------
Mon Mar 10 11:05:07 CET 2003 - jsrain@suse.de

- fixed filtering of modules added to initrd (#24709)
- fixed partition activation if bootloader in logical disk (#24740)
- 2.7.14

-------------------------------------------------------------------
Fri Mar  7 10:16:51 CET 2003 - jsrain@suse.de

- fixed update from version without sysconfig variables specifying
  used bootloader (#24783)
- fixed reading configuration, not using agent's cache (#24821)
- 2.7.13

-------------------------------------------------------------------
Wed Mar  5 13:48:29 CET 2003 - jsrain@suse.de

- fixed multiple occurences of map option in one GRUB section
  (#24627)
- not adding automatically the apic kernel option (#24668)
- fixed error message in log during saving (#24705)

-------------------------------------------------------------------
Mon Mar  3 12:51:51 CET 2003 - jsrain@suse.de

- added possibility to force complete bootloader save (not save
  only if settings have changed - no UI change, only for other
  modules that need it)
- merged texts from final proofreading
- 2.7.12

-------------------------------------------------------------------
Fri Feb 28 11:04:26 CET 2003 - jsrain@suse.de

- updated the detection of changes of settings (#24422)
- 2.7.11

-------------------------------------------------------------------
Thu Feb 27 12:33:24 CET 2003 - jsrain@suse.de

- fixed ordering of bootloader options (#24420)

-------------------------------------------------------------------
Mon Feb 24 09:20:59 CET 2003 - jsrain@suse.de

- updated confirmation popup after bootloader is isntalled to
  floppy (#23903)
- fixed forgotten saving of cfg. files in some cases (#24073)
- in repair mode reading bootloader type from sysconfig, no probing
  (#24062)
- 2.7.10

-------------------------------------------------------------------
Fri Feb 21 13:11:08 CET 2003 - jsrain@suse.de

- fixed adding of memtest to bootloader menu (#23924)
- fixed help text and behaviour of password option popup (#23954)
- added support for easy updating initrd contents during system
  update (#23976)
- fixed setting focus in popups (#24050)

-------------------------------------------------------------------
Thu Feb 20 09:50:57 CET 2003 - jsrain@suse.de

- changed executing /sbin/mk_initrd -> /sbin/mkinitrd
- reorganized kernel parameters when using GRUB (#23829)
- fixed capitalization of YCC labels (#23848)
- 2.7.9

-------------------------------------------------------------------
Wed Feb 19 14:17:58 CET 2003 - jsrain@suse.de

- changed color of text-mode LILO menu - now is blue
- removed unwanted reseting of "disk" LILO option when reproposing
  configuraition - some systems could be unbootable with LILO
  without possibility to prevent it at installation time
- updated ydoc comments
- fixed conversion between GRUB and LILO (#23826)

-------------------------------------------------------------------
Mon Feb 17 15:57:17 CET 2003 - jsrain@suse.de

- added popup when bootloader saved to floppy (#23571)
- added extra stage in progress bar for reading disks partitioning
  (#23712)
- 2.7.8

-------------------------------------------------------------------
Fri Feb 14 09:33:09 CET 2003 - jsrain@suse.de

- added splash-screen's size parameter when calling mk_initrd
  (#23579)

-------------------------------------------------------------------
Thu Feb 13 10:41:08 CET 2003 - jsrain@suse.de

- fixed floppy entry in bootloader menu behaviour - if installing
  to floppy, hard disk is used instead (#23572)

-------------------------------------------------------------------
Mon Feb 10 16:06:25 CET 2003 - jsrain@suse.de

- fixed proposing with merging GRUB menus, resulted in doubled
  items (#23346)
- merged proofread texts from second and third round
- 2.7.7

-------------------------------------------------------------------
Wed Feb  5 13:36:05 CET 2003 - jsrain@suse.de

- fixed bootloader changing during installation (#20759)
- fixed list of locations to hold bootloader bootsector (#17320)

-------------------------------------------------------------------
Tue Feb  4 13:50:29 CET 2003 - jsrain@suse.de

- updates of autoinstallation

-------------------------------------------------------------------
Mon Feb  3 16:59:29 CET 2003 - jsrain@suse.de

- fixed NCurses usability - focus setting
- 2.7.6

-------------------------------------------------------------------
Fri Jan 31 11:59:29 CET 2003 - jsrain@suse.de

- not adding lvm groups and md disks to device map (#23217)

-------------------------------------------------------------------
Thu Jan 30 09:15:45 CET 2003 - jsrain@suse.cz

- fixed setting of vga= kernel parameter (#23188)

-------------------------------------------------------------------
Wed Jan 29 13:23:45 CET 2003 - jsrain@suse.de

- patched proofread texts

-------------------------------------------------------------------
Tue Jan 28 13:43:45 CET 2003 - jsrain@suse.de

- fixed compilation of MBR only on selected platforms
- 2.7.5

-------------------------------------------------------------------
Mon Jan 27 17:48:21 CET 2003 - jsrain@suse.de

- added new testsuites
- added missing translators comments
- added missing functions comments
- made Replace code in MBR function running
- 2.7.4

-------------------------------------------------------------------
Fri Jan 24 13:04:19 CET 2003 - jsrain@suse.de

- fixed too often blinking floppy
- fixed Changed column modifying

-------------------------------------------------------------------
Thu Jan 23 13:44:33 CET 2003 - jsrain@suse.de

- fixed fillup-template usage
- changed symbols in export map to strings because of
  autoinstallation
- 2.7.3

-------------------------------------------------------------------
Wed Jan 22 14:30:26 CET 2003 - jsrain@suse.de

- fixed meaningless log messages (#23025)

-------------------------------------------------------------------
Fri Jan 17 15:00:17 CET 2003 - jsrain@suse.de

- fixed detection of disks configuration changes that may decide to
  use other bootloader (#22918)
- updated S390 installation
- 2.7.2

-------------------------------------------------------------------
Fri Jan 10 17:25:38 CET 2003 - jsrain@suse.de

- fixed failsafe kernel parameters on i386 (#22539)

-------------------------------------------------------------------
Fri Dec 20 16:37:56 CET 2002 - jsrain@suse.de

- added documentation files

-------------------------------------------------------------------
Thu Dec 19 16:27:40 CET 2002 - jsrain@suse.de

- fixed path to elilo.conf (IA64 only affected) (#22502)

-------------------------------------------------------------------
Tue Dec 17 14:53:24 CET 2002 - jsrain@suse.de

- now using fillup-template for sysconfig/bootloader

-------------------------------------------------------------------
Fri Dec 13 08:48:41 CET 2002 - jsrain@suse.de

- fixed ordering of modules in initrd
- added function for changing write process settings

-------------------------------------------------------------------
Wed Dec 11 11:14:58 CET 2002 - jsrain@suse.de

- if something goes wrong during bootloader installation saving, it
  is now possible to fix configuration (#21076)
- possible to change section type an easy way (#19451)
- dialogs updates
- other updates and fixes
- adding sysconfig metadata
- 2.7.1

-------------------------------------------------------------------
Wed Dec  4 17:46:46 CET 2002 - jsrain@suse.cz

- Removed global variables from Liloagent, now able to be used at
  once for more bootloaders
- Added GRUB option types to LiloAgent
- Removed test mode and possible security problem from bootfloppy
  (#20962)
- Fixed several problems of LiloAgent
- Fixed ask for floppy popup (#10485)
- If no initrd created, GRUB's menu.lst doesn't contain it now
  (#21469)
- 2.7.0

-------------------------------------------------------------------
Tue Nov 19 15:19:59 CET 2002 - schwab@suse.de

- Use product name for EFI boot manager entry (#21879).
- Report error when boot loader installation fails.

-------------------------------------------------------------------
Wed Nov 13 09:08:12 CET 2002 - jsrain@suse.cz

- again fixed installing a kernel to *NWSSTG when root is on RAID
  on PPC (#21368)
- creating syntactically correct menu.lst file for GRUB, contents
  may be still incorrect on some servers (#20637)
- 2.6.66

-------------------------------------------------------------------
Tue Nov  5 09:41:05 CET 2002 - jsrain@suse.cz

- Bugfix - LTC1394 - FTP installation to root on LVM didn't install
  a kernel on PPC (#20933)
- 2.6.65

-------------------------------------------------------------------
Wed Oct 30 21:44:47 CET 2002 - kukuk@suse.de

- fix log path in dosilo script
- update_silo_conf: modify version number in /boot/message
- BootSILO.ycp: Don't show popup on success when installing silo

-------------------------------------------------------------------
Wed Oct 30 21:39:20 CET 2002 - kukuk@suse.de

- fix log path in dosilo script
- update_silo_conf: modify version number in /boot/message
- BootSILO.ycp: Don't show popup on success when installing silo

-------------------------------------------------------------------
Tue Oct 29 10:13:28 CET 2002 - jsrain@suse.cz

- fixed target dialog for x86-64 (#21258)
- fixed selecting a prep boot partition on the root drive on PPC
  (#21315)
- fixed installing a kernel to *NWSSTG when root is on RAID on PPC
  (#21368)
- 2.6.64

-------------------------------------------------------------------
Fri Oct 25 14:38:02 CEST 2002 - arvin@suse.de

- log output of mk_initrd also on S390 (bug #21273)
- 2.6.63

-------------------------------------------------------------------
Mon Oct 14 16:50:46 CEST 2002 - jsrain@suse.cz

- fixed activating of boot partition if not instaling bootloader
  (#20874)
- 2.6.62

-------------------------------------------------------------------
Fri Oct 11 11:10:43 CEST 2002 - jsrain@suse.cz

- fixed security problem with permissions of /boot/grub/menu.lst
  (#20803)
- activating /boot partition if grub installed to mbr (part of
  #20637)
- 2.6.61

-------------------------------------------------------------------
Thu Oct 10 17:32:15 CEST 2002 - jsrain@suse.cz

- if bootloader which should be used is not selected for
  installation, backup one is installed on i386 and x86-64
  (grub instead of lilo and lilo instead of grub) (#20759)

-------------------------------------------------------------------
Wed Oct  9 09:22:09 CEST 2002 - jsrain@suse.cz

- now not enabling 2 gettys on same serial line on p690 (#19788)

-------------------------------------------------------------------
Tue Oct  8 14:16:06 CEST 2002 - jsrain@suse.cz

- fixed type in initrd modules ignore list for PPC (#20684)
- 2.6.59

-------------------------------------------------------------------
Mon Oct  7 08:23:36 CEST 2002 - jsrain@suse.cz

- fixed activating boot method on PPC (#20407)
- fixed helptexts on PPC (#20605)
- fixed translating of PPC-specific strings
- 2.6.58

-------------------------------------------------------------------
Fri Oct  4 10:38:02 CEST 2002 - jsrain@suse.cz

- added more comments to bootloader in sysconfig/bootloader (#20385)
- fixed restoring original configuration - could caused unbootable
  system (#20391)
- 2.6.57

-------------------------------------------------------------------
Wed Oct  2 14:01:36 CEST 2002 - jsrain@suse.cz

- fixed update of lilo, resulted in corrupted lilo.conf (#20320)
- fixed errors reporting during bootloader update (#20321)
- fixed activating of initrd at update (#19643)

-------------------------------------------------------------------
Tue Oct  1 15:34:28 CEST 2002 - jsrain@suse.cz

- fixed nasty trap in bootloader installation (now not reseting
  configuration without question) (#20073)

-------------------------------------------------------------------
Fri Sep 27 16:45:01 CEST 2002 - jsrain@suse.cz

- applied patches for PPC (#20178 and #20205 - initrd modules list)

-------------------------------------------------------------------
Fri Sep 27 08:45:51 CEST 2002 - lslezak@suse.cz

- fixed configuration reset at installation proposal
  if partitioning was changed (#20073)
- fixed failsafe options on x86-64 (removed disableapic,
  added iommu=noforce) (#19903)

-------------------------------------------------------------------
Tue Sep 24 11:23:39 CEST 2002 - lslezak@suse.cz

- check if label already exists (in section edit),
  allow labels longer than 15 chars for grub (#19874)
- removed 'nosmp' from failsafe options on x86-64 (#19903)
- don't add rewritten other section to menu (#19990)
- version 2.6.56

-------------------------------------------------------------------
Tue Sep 17 17:13:23 CEST 2002 - lslezak@suse.de

- fixed obsoleted help text in y2cc (#19466)
- version 2.6.55

-------------------------------------------------------------------
Fri Sep 13 13:52:12 CEST 2002 - mvidner@suse.cz

- bootfloppy: enable asking the user for the CD (#19628).
- 2.6.54

-------------------------------------------------------------------
Fri Sep 13 13:25:06 CEST 2002 - fehr@suse.de

- make supression of certain modules (cdrom and usb) work
- version 2.6.53

-------------------------------------------------------------------
Thu Sep 12 19:58:13 CEST 2002 - lslezak@suse.cz

- do not regenerate device.map file at update (part of #19555)
- version 2.6.52

-------------------------------------------------------------------
Thu Sep 12 18:17:11 CEST 2002 - fehr@suse.de

- fix to use lilo on update if there is no /etc/sysconfig/bootloader
  (#19558)

-------------------------------------------------------------------
Thu Sep 12 16:12:56 CEST 2002 - lslezak@suse.cz

- add current kernel parameters to lilo.conf at update (#19415)
- added missing function DisplayLogFile to BootSILO.ycp, BootELILO.ycp
- version 2.6.51

-------------------------------------------------------------------
Thu Sep 12 16:02:49 CEST 2002 - kkaempf@suse.de

- run mkinitrd on PPC if needed (#18276)
- 2.6.50

-------------------------------------------------------------------
Thu Sep 12 11:23:17 CEST 2002 - kkaempf@suse.de

- exclude usb modules from initrd (#19432)
- 2.6.49

-------------------------------------------------------------------
Wed Sep 11 14:02:12 CEST 2002 - lslezak@suse.cz

- don't change configuration if partitioning was changed
  and bootloader location is floppy (at installation proposal) (#19388)
- allow installation on extended partition (at installation) (#19184)
- version 2.6.48

-------------------------------------------------------------------
Tue Sep 10 18:30:26 CEST 2002 - kkaempf@suse.de

- ppc bugfix #18849
- 2.6.47

-------------------------------------------------------------------
Tue Sep 10 17:32:18 CEST 2002 - lslezak@suse.cz

- use lilo instead grub at update
- version 2.6.46

-------------------------------------------------------------------
Tue Sep 10 12:15:10 CEST 2002 - fehr@suse.de

- fix root device detection of mk_lilo_conf
- change default mbr detection in Boot.ycp (#19117)
- prevent blanks in label in BootLILO.ycp (#19181)
- version 2.6.45

-------------------------------------------------------------------
Mon Sep  9 17:59:48 CEST 2002 - lslezak@suse.cz

- allow installation on extended partion (#19184)
- version 2.6.44

-------------------------------------------------------------------
Mon Sep  9 13:40:09 CEST 2002 - mvidner@suse.cz

- Replace whitespace (and nonprintable characters)
  in lilo section labels by an underscore (#19181).
- Properly use / or /boot/ in /boot/grub/menu.lst during upgrade (#19125).
- 2.6.43

-------------------------------------------------------------------
Sun Sep  8 19:47:38 CEST 2002 - mvidner@suse.cz

- Fixed the testsuite.
- 2.6.42

-------------------------------------------------------------------
Sun Sep  8 13:30:47 CEST 2002 - kkaempf@suse.de

- drop "make check" for the moment.

-------------------------------------------------------------------
Fri Sep  6 21:34:54 CEST 2002 - kkaempf@suse.de

- workaround for hwinfo bug (#19071)
- 2.6.41

-------------------------------------------------------------------
Fri Sep  6 17:16:13 CEST 2002 - jsrain@suse.cz

- fixed provides/obsoletes
- 2.6.40

-------------------------------------------------------------------
Fri Sep  6 12:45:21 CEST 2002 - jsrain@suse.cz

- fixed deletion of cfg. file entries wjen using GRUB (Bug #18962)
- fixed rendering GRUB menu on installed system (Bug #18973)
- fixed handling of errors during bootlaoder installation
  (Bug #19020)
- 2.6.39

-------------------------------------------------------------------
Thu Sep  5 21:14:47 CEST 2002 - kkaempf@suse.de

- properly check for update when determing boot type
- 2.6.38

-------------------------------------------------------------------
Thu Sep  5 11:49:23 CEST 2002 - jsrain@suse.cz

- not calling Storage::UseLilo () in Boot module constructor
- 2.6.37

-------------------------------------------------------------------
Thu Sep  5 10:36:55 CEST 2002 - schwab@suse.de

- Move elilo.conf to /boot/efi/SuSE.

-------------------------------------------------------------------
Wed Sep  4 12:35:39 CEST 2002 - jsrain@suse.cz

- fixed bootfloppy function (Bug #17430)
- fixed checking for need to set active partition (Bug #18835)
- fixed reseting bootloader type after partitioning change
- fixed label of sections dialog (Bug #18877)
- 2.6.36

-------------------------------------------------------------------
Tue Sep  3 20:37:36 CEST 2002 - kukuk@suse.de

- installation/src/silo/agents/update_silo_conf: New
  file, modifies silo.conf and boot/message if an update is done.
- installation/src/silo/BootSILO.ycp: Implement calling "dosilo"
  script.
- prom.cc: Add reg string if prom name exists at least once.

-------------------------------------------------------------------
Tue Sep  3 17:05:39 CEST 2002 - jsrain@suse.cz

- fixed usage of Pkg::SourceProvideFile function

-------------------------------------------------------------------
Tue Sep  3 10:28:02 CEST 2002 - jsrain@suse.cz

- if partitioning changes, resets bootloader location to MBR, only
  meaningful partitions possible as bootloader bootsector locations
  (Bug #18744)
- 2.6.35

-------------------------------------------------------------------
Mon Sep  2 17:33:54 CEST 2002 - jsrain@suse.cz

- added reset function (for calling after partitioning changes
  during installation) (Bug #18744)

-------------------------------------------------------------------
Mon Sep  2 10:55:24 CEST 2002 - jsrain@suse.cz

- updating prep boot partition during installation on PPC
  (Bug #18689)
- 2.6.34

-------------------------------------------------------------------
Fri Aug 30 15:54:15 CEST 2002 - jsrain@suse.cz

- fixed bootfloppy creation (not yet tested) (Bug #17430)
- building fixed
- removed shadowed symbols (Bug #18622)
- 2.6.33

-------------------------------------------------------------------
Wed Aug 28 12:13:05 CEST 2002 - kkaempf@suse.de

- fix checking for splashscreen
- 2.6.31

-------------------------------------------------------------------
Wed Aug 28 11:57:22 CEST 2002 - jsrain@suse.cz

- fixed building on SPARC
- removed unneeded files from GRUB installation
- fixed boot floppies location
- fixed logging
- 2.6.32

-------------------------------------------------------------------
Tue Aug 27 16:19:25 CEST 2002 - jsrain@suse.cz

- if no boot message exists not including in menu.lst (Bug #18381)
- fixed ordering of list of kernel images / other partitions
- 2.6.30

-------------------------------------------------------------------
Mon Aug 26 23:39:13 EDT 2002 - nashif@suse.de

- do not reset location value in autoinst mode
- if location is not empty, configure boot device in autoinst
  mode (Avoid calling ConfigureLocation)
- 2.6.29

-------------------------------------------------------------------
Mon Aug 26 17:12:14 CEST 2002 - jsrain@suse.cz

- removed icons from control center on S390 (Bugs #18371 and #18367)
- fixed curses UI buttons (Bug #18333)
- fixed handling of nonwritable floppy (Bug #18312)
- fixed PPC installation (Bug #18140)
- 2.6.28

-------------------------------------------------------------------
Fri Aug 23 18:34:27 CEST 2002 - jsrain@suse.cz

- fixed lists of devices (Bug #18269)
- fixed installation on compaq disk array (Bug #18134)
- 2.6.27

-------------------------------------------------------------------
Tue Aug 20 17:05:05 CEST 2002 - arvin@suse.de

- correctly handle hvc console on ppc
- 2.6.26

-------------------------------------------------------------------
Tue Aug 20 14:48:13 CEST 2002 - jsrain@suse.cz

- fixed original configuration restore when using GRUB
- fixed partition list reading
- 2.6.25

-------------------------------------------------------------------
Mon Aug 19 14:10:01 CEST 2002 - jsrain@suse.cz

- modified failsafe kernel image name for update of lilo
- fixed GRUB save after configuration
- not deleting old device map during installation
- /sbin/elilo now not running after configuration change
- 2.6.24

-------------------------------------------------------------------
Fri Aug 16 14:13:01 CEST 2002 - jsrain@suse.cz

- added universal functions for accessing kernel parameters
  independent on bootloader
- modified failsafe kernel image name
- fixed kdoc comments
- merged proofread texts
- now building initrd on S390
- 2.6.23

-------------------------------------------------------------------
Tue Aug 13 06:49:05 CEST 2002 - jsrain@suse.cz

- fixed handling different BIOS Ids (Bug #17594)
- added disableapic to failsafe kernel command
- 2.6.22

-------------------------------------------------------------------
Fri Aug  9 16:10:37 CEST 2002 - jsrain@suse.de

- fixed installation on S390 (Bug #17244)
- 2.6.21

-------------------------------------------------------------------
Fri Aug  9 09:24:57 CEST 2002 - jsrain@suse.de

- now setting framebuffer vga mode (Bug #17537)
- 2.6.20

-------------------------------------------------------------------
Thu Aug  8 09:59:38 CEST 2002 - jsrain@suse.de

- fixed device name translation for GRUB during installation for
  other systems
- 2.6.19

-------------------------------------------------------------------
Wed Aug  7 15:04:52 CEST 2002 - jsrain@suse.de

- Fix adaptation for multiple 'other' partitions for booting
  for GRUB (#17458)
- 2.6.18

-------------------------------------------------------------------
Wed Aug  7 12:39:25 CEST 2002 - kkaempf@suse.de

- Allow for multiple 'other' partitions for booting (#17458)

-------------------------------------------------------------------
Wed Aug  7 08:45:44 CEST 2002 - jsrain@suse.de

- added support for changing kernel command line for other modules
  when using GRUB easily
- 2.6.17

-------------------------------------------------------------------
Tue Aug  6 16:43:24 CEST 2002 - jsrain@suse.de

- fixed abort button behaviour
- 2.6.16

-------------------------------------------------------------------
Tue Aug  6 15:07:04 CEST 2002 - jsrain@suse.de

- fixed ordering of GRUB commands in menu.lst
- added expert configuration of /etc/grub.conf
- 2.6.15

-------------------------------------------------------------------
Mon Aug  5 18:00:24 CEST 2002 - jsrain@suse.cz

- fixed lilo update problem (Bug #15819)
- fixed bootloader loaction dialog contents (Bug #17320)

-------------------------------------------------------------------
Mon Aug 05 13:11:26 CEST 2002 - arvin@suse.de

- changes for new /etc/install.inf agent

-------------------------------------------------------------------
Mon Aug  5 12:55:29 CEST 2002 - fehr@suse.de

- make BootS390.ycp work again (was broken after 8.0 changes)
- 2.6.13

-------------------------------------------------------------------
Thu Aug  1 15:15:24 CEST 2002 - jsrain@suse.cz

- minor updates and fixes
- 2.6.12

-------------------------------------------------------------------
Tue Jul 30 16:15:24 CEST 2002 - jsrain@suse.cz

- added comments for translators

-------------------------------------------------------------------
Tue Jul 30 15:27:45 CEST 2002 - arvin@suse.de

- fixed configuration of grub

-------------------------------------------------------------------
Mon Jul 29 11:26:24 CEST 2002 - jsrain@suse.cz

- added basic expert dialogs for GRUB
- several fixes
- 2.6.10

-------------------------------------------------------------------
Fri Jul 26 15:44:32 CEST 2002 - jsrain@suse.cz

- fixed configuration of installed system for GRUB
- added password support for GRUB
- added boot from floppy support for GRUB
- 2.6.9

-------------------------------------------------------------------
Fri Jul 26 09:34:02 CEST 2002 - jsrain@suse.cz

- added bootloader graphical screen support for GRUB
- added other OS during installation support for GRUB
- 2.6.8

-------------------------------------------------------------------
Thu Jul 25 15:54:25 CEST 2002 - schwab@suse.de

- Fix doelilo script.

-------------------------------------------------------------------
Thu Jul 25 13:28:41 CEST 2002 - jsrain@suse.cz

- added support for GRUB configuration on running system
- added support for installing GRUB during installation process
- fixed for lilo startup (#17142)
- 2.6.7

-------------------------------------------------------------------
Mon Jul 22 12:20:57 CEST 2002 - kkaempf@suse.de

- prepare for GRUB support

-------------------------------------------------------------------
Wed Jul 17 11:28:44 CEST 2002 - arvin@suse.de

- fixed file list for i386 (use %ix86 macro)

-------------------------------------------------------------------
Fri Jul 12 12:33:34 CEST 2002 - arvin@suse.de

- use proper namespace for Args and CallFunction (#16776)

-------------------------------------------------------------------
Mon Jul  8 16:01:04 CEST 2002 - mvidner@suse.cz

- fixed Provides/Obsoletes (yast2-agent-liloconf)

-------------------------------------------------------------------
Thu Jul 04 20:50:02 CEST 2002 - arvin@suse.de

- moved non binary files to /usr/share/YaST2

-------------------------------------------------------------------
Wed Jul  3 10:38:58 CEST 2002 - lslezak@suse.cz

- fixed installation/src/ppc/agents/Makefile.am (ppc build bug)
- version 2.6.2

-------------------------------------------------------------------
Tue Jul  2 15:31:29 CEST 2002 - lslezak@suse.cz

- merged with yast2-agent-lilo, yast2-agent-prom,
  yast2-config-bootfloppy and yast2 lilo installation part
- renamed to yast2-bootloader
- version 2.6.1

-------------------------------------------------------------------
Tue Jun 25 16:57:19 CEST 2002 - lslezak@suse.cz

- addded editor for expert user
- changed ABC::`abc -> ABC::abc
- version 2.6.0

-------------------------------------------------------------------
Thu Apr 11 11:01:31 CEST 2002 - lslezak@suse.cz

- SuSE-8_0-Branch merged to the head

-------------------------------------------------------------------
Thu Mar 21 15:04:50 CET 2002 - mvidner@suse.cz

- Obsoletes yast2-config-bootloader. (#15135)
- 2.5.13

-------------------------------------------------------------------
Fri Mar 15 12:01:57 CET 2002 - dmeszar@suse.cz

- fixed #14935 (can't close with WM)

-------------------------------------------------------------------
Mon Mar  4 12:12:49 CET 2002 - dmeszar@suse.cz

- fixed bug #14100 (main dialog not hiden when exiting)
- screenshot mode implemented

-------------------------------------------------------------------
Mon Feb 18 19:29:06 CET 2002 - dmeszar@suse.cz

- fixed bug #13505 (incomplete label "Uninstall boot loader from"->
  device name is missing)
- fixed bug #13524 (broken writing of special lilo options
  (like change-rules, disk, map-drive...)

-------------------------------------------------------------------
Mon Feb 11 15:19:24 CET 2002 - dmeszar@suse.cz

- fixed restoring original settings from installation

-------------------------------------------------------------------
Tue Feb  5 13:24:57 CET 2002 - dmeszar@suse.cz

- implemented section order changing

-------------------------------------------------------------------
Mon Jan 28 17:04:55 CET 2002 - dmeszar@suse.cz

- don't read 'user_settings'

-------------------------------------------------------------------
Wed Jan 23 17:44:13 CET 2002 - dmeszar@suse.cz

- fixed rpm dependencied

-------------------------------------------------------------------
Fri Jan 11 19:38:30 CET 2002 - dmeszar@suse.cz

- fixed original lilo.conf restoring

-------------------------------------------------------------------
Sat Dec 22 18:45:31 CET 2001 - dmeszar@suse.cz

- autoinstallation adaptation
- installed linux's scanner
- 3rd param for 'select', fixed specfile

-------------------------------------------------------------------
Fri Nov  9 13:21:52 CET 2001 - dmeszar@suse.cz

- major ui changes- new startup dialog, sequence changed
- addaptation for installation

-------------------------------------------------------------------
Thu Sep 20 19:08:32 CEST 2001 - dmeszar@suse.cz

- module icon changed to 'boot.png' ;)

-------------------------------------------------------------------
Tue Sep 18 15:36:00 CEST 2001 - dmeszar@suse.cz

- module icon changed to 'lilo.png' (#10656)

-------------------------------------------------------------------
Mon Sep 17 14:01:01 CEST 2001 - dmeszar@suse.cz

- bug #10661 fixed (lilo configuration written without change !!)
- bug #10667 fixed (No section is marked as default, if there is the
    keyword 'default' missing in the lilo.conf.)

-------------------------------------------------------------------
Thu Sep 13 16:51:28 CEST 2001 - kendy@suse.cz

- Write the lilo.conf first and then run lilo (not in the reverse
  order...)
- Some unused code removed, lilo_write.ycp is not distributed.

-------------------------------------------------------------------
Mon Sep 10 14:47:28 CEST 2001 - dmeszar@suse.cz

- use Arch:: instead of user_settings

-------------------------------------------------------------------
Tue Sep  4 15:02:23 CEST 2001 - dmeszar@suse.cz

- fix #10062
- fixed the qt-IntField update bug (after creation of
  dialog the intfield doesn't show its actual value
  but shows 0 under qt)

-------------------------------------------------------------------
Fri Aug 31 13:49:03 CEST 2001 - dmeszar@suse.cz

- use 'Add other section' radio button instead of 'add windows/os2 section'
  for sparcs
- removed debug logging

-------------------------------------------------------------------
Mon Aug 27 12:54:32 CEST 2001 - dmeszar@suse.cz

- removed 'uninstall silo', 'install to boot/root' for sparcs
- sparc: if kernel image's path is /'kernel', add '/boot' as prefix
  when checking the kernel existence and description

-------------------------------------------------------------------
Mon Aug 20 16:58:35 CEST 2001 - dmeszar@suse.cz

- fixed section label displaying in summary table ("section label" - > section label)

-------------------------------------------------------------------
Mon Aug 13 17:14:39 CEST 2001 - dmeszar@suse.cz

- fixed description for other sections in summary table

-------------------------------------------------------------------
Wed Aug  8 15:09:04 CEST 2001 - dmeszar@suse.cz

- correct handling od '\' '"' chars when reading ui input fields
- fixed 'other' section removing
- section quota set to 16

-------------------------------------------------------------------
Tue Jul 31 19:07:59 CEST 2001 - dmeszar@suse.cz

- uninstall ability implemnted
- section removing fixed
- don't show 'image' option in options list of image/other section
- help text for options stripped to minimal acceptable extent
- options dialog layout changes
- option editing dialog added

-------------------------------------------------------------------
Mon Jul 30 16:49:14 CEST 2001 - dmeszar@suse.cz

- save confirm dialog added

-------------------------------------------------------------------
Thu Jul 26 18:59:25 CEST 2001 - dmeszar@suse.cz

- proof-read texts, platform dependent code added

-------------------------------------------------------------------
Thu Mar 22 09:27:24 CET 2001 - dmeszar@suse.cz

- initial version

Places

File yast2-bootloader.changes of Package yast2-bootloader (Revision d0d96159d0d2b06569f856ccafd23183)

Places