File tests-use-wait_for_dev_to_-functions.patch of Package parted

Overview Repositories Revisions Requests Users Attributes Meta

File tests-use-wait_for_dev_to_-functions.patch of Package parted (Revision b93635dbfc8d9107e78a6da90ddc3c8e)

Currently displaying revision b93635dbfc8d9107e78a6da90ddc3c8e , Show latest

From: "Brian C. Lane" <bcl@redhat.com>
Date: Fri, 7 Aug 2015 11:43:17 -0700
Subject: tests: Use wait_for_dev_to_ functions
For: upstream code
Patch-mainline: v3.3
Git-commit: db1728e6402a27fe64e8e132f810c22160ab8bcc

Recent changes to udev have made some long-standing problems appear more
frequently. udev executes various actions when changes are made to
devices. Sometimes this can result in device nodes not appearing
immediately. Other times it can result in EBUSY being returned. This
patch only addresses devices that are slow to appear/disappear.

It is best to use the wait_for_dev_to_appear_ and
wait_for_dev_to_disappear_ functions than to test for existance. These
will loop and wait for up to 2 seconds for it to appear.

This also changes t9041 to fail if mkfs doesn't work since using skip
here may hide cases when the device node doesn't appear.

[sparschauer: remove hunks for non-existing tests]
Signed-off-by: Sebastian Parschauer <sparschauer@suse.de>
---
 tests/t1100-busy-label.sh                       | 10 ++--------
 tests/t1102-loop-label.sh                       | 25 +++++--------------------
 tests/t2320-dos-extended-noclobber.sh           |  1 +
 tests/t6001-psep.sh                             |  4 ++--
 tests/t6004-dm-many-partitions.sh               |  6 ++----
 tests/t6006-dm-512b-sectors.sh                  |  1 +
 tests/t6100-mdraid-partitions.sh                |  5 +++--
 tests/t9041-undetected-in-use-16th-partition.sh |  2 +-
 8 files changed, 17 insertions(+), 37 deletions(-)

diff --git a/tests/t1100-busy-label.sh b/tests/t1100-busy-label.sh
index 4e256d32a010..70e8edec8a60 100755
--- a/tests/t1100-busy-label.sh
+++ b/tests/t1100-busy-label.sh
@@ -27,22 +27,16 @@ dev=$(cat dev-name)
 
 parted -s "$dev" mklabel msdos mkpart primary fat32 1 40 > out 2>&1 || fail=1
 compare /dev/null out || fail=1
-mkfs.vfat ${dev}1 || skip_ "mkfs.vfat failed"
+wait_for_dev_to_appear_ ${dev}1 || fail=1
+mkfs.vfat ${dev}1 || fail=1
 
 mount_point="`pwd`/mnt"
 
 # Be sure to unmount upon interrupt, failure, etc.
 cleanup_fn_() { umount "${dev}1" > /dev/null 2>&1; }
 
-# There's a race condition here: on udev-based systems, the partition#1
-# device, ${dev}1 (i.e., /dev/sdd1) is not created immediately, and
-# without some delay, this mount command would fail.  Using a flash card
-# as $dev, the loop below typically iterates 7-20 times.
-
 # create mount point dir. and mount the just-created partition on it
 mkdir $mount_point || fail=1
-i=0; while :; do test -e "${dev}1" && break; test $i = 90 && break;
-  i=$(expr $i + 1); done;
 mount "${dev}1" $mount_point || fail=1
 
 # now that a partition is mounted, mklabel attempt must fail
diff --git a/tests/t1102-loop-label.sh b/tests/t1102-loop-label.sh
index 97520021004d..68b9af45b428 100644
--- a/tests/t1102-loop-label.sh
+++ b/tests/t1102-loop-label.sh
@@ -44,15 +44,9 @@ mv out o2 && sed -e "s,$dev,DEVICE,;s/  *$//" o2 > out
 
 compare exp out || fail=1
 parted -s $dev rm 1 || fail=1
-if [ -e ${dev}1 ]; then
-    echo "Partition should not exist on loop device"
-    fail=1
-fi
+wait_for_dev_to_disappear_ ${dev}1 2 || fail=1
 partprobe $dev || fail=1
-if [ -e ${dev}1 ]; then
-    echo "Partition should not exist on loop device"
-    fail=1
-fi
+wait_for_dev_to_disappear_ ${dev}1 2 || fail=1
 
 mount_point="`pwd`/mnt"
 
@@ -80,24 +74,15 @@ umount "$mount_point"
 
 # make sure partprobe cleans up stale partition devices
 parted -s $dev mklabel msdos mkpart primary ext2 0% 100% || fail=1
-if [ ! -e ${dev}1 ]; then
-    echo "Partition doesn't exist on loop device"
-    fail=1
-fi
+wait_for_dev_to_appear_ ${dev}1 || fail=1
 
 mke2fs -F $dev
 partprobe $dev || fail=1
-if [ -e ${dev}1 ]; then
-    echo "Partition should not exist on loop device"
-    fail=1
-fi
+wait_for_dev_to_disappear_ ${dev}1 2 || fail=1
 
 # make sure new loop label removes old partitions > 1
 parted -s $dev mklabel msdos mkpart primary ext2 0% 50% mkpart primary ext2 50% 100% || fail=1
 parted -s $dev mklabel loop || fail=1
-if [ -e ${dev}2 ]; then
-    echo "Partition 2 not removed"
-    fail=1
-fi
+wait_for_dev_to_disappear_ ${dev}2 2 || fail=1
 
 Exit $fail
diff --git a/tests/t6001-psep.sh b/tests/t6001-psep.sh
index f15090abb3e7..4c758e8fbc73 100644
--- a/tests/t6001-psep.sh
+++ b/tests/t6001-psep.sh
@@ -54,7 +54,7 @@ parted -s $dev mklabel msdos mkpart primary fat32 1m 5m > out 2>&1 || fail=1
 compare /dev/null out || fail=1
 
 #make sure device name is correct
-test -e ${dev}p1 || fail=1
+wait_for_dev_to_appear_ ${dev}p1 || fail=1
 
 #repeat on name not ending in a digit
 # setup: create a mapping
@@ -66,7 +66,7 @@ parted -s $dev mklabel msdos mkpart primary fat32 1m 5m > out 2>&1 || fail=1
 compare /dev/null out || fail=1
 
 #make sure device name is correct
-test -e ${dev}1 || fail=1
+wait_for_dev_to_appear_ ${dev}1 || fail=1
 
 if [ -n "$fail" ]; then
     ls /dev/mapper
diff --git a/tests/t6004-dm-many-partitions.sh b/tests/t6004-dm-many-partitions.sh
index 8d291ef55664..7ebc48a18db8 100755
--- a/tests/t6004-dm-many-partitions.sh
+++ b/tests/t6004-dm-many-partitions.sh
@@ -49,10 +49,8 @@ parted -m -a min -s /dev/mapper/$dm_name mklabel gpt $cmd > /dev/null 2>&1 || fa
 
 # Make sure all the partitions appeared under /dev/mapper/
 for ((i=1; i<=$n_partitions; i+=1)); do
-    if [ ! -e "/dev/mapper/${dm_name}p$i" ]; then
-        fail=1
-        break
-    fi
+    wait_for_dev_to_appear_ "/dev/mapper/${dm_name}p$i" || { fail=1; break; }
+
     # remove the partitions as we go, otherwise cleanup won't work.
     dmsetup remove /dev/mapper/${dm_name}p$i
 done
diff --git a/tests/t6100-mdraid-partitions.sh b/tests/t6100-mdraid-partitions.sh
index 6f08442dd66d..dbc5986b9019 100755
--- a/tests/t6100-mdraid-partitions.sh
+++ b/tests/t6100-mdraid-partitions.sh
@@ -54,13 +54,14 @@ parted -s $md_dev mklabel gpt \
 compare /dev/null out || fail=1
 
 # Verify that kernel has been informed about the second device.
-grep "${md_name}p2" /proc/partitions || { fail=1; cat /proc/partitions; }
+wait_for_dev_to_appear_ ${md_dev}p2 || { fail=1; cat /proc/partitions; }
 
 # Remove partitions from the raid device.
 parted -s $md_dev rm 2 rm 1 > out 2>&1 || fail=1
 compare /dev/null out || fail=1
 
 # Verify that kernel has been informed about those removals.
-grep "${md_name}p[12]" /proc/partitions && { fail=1; cat /proc/partitions; }
+wait_for_dev_to_disappear_ ${md_dev}p1 2 || { fail=1; cat /proc/partitions; }
+wait_for_dev_to_disappear_ ${md_dev}p2 2 || { fail=1; cat /proc/partitions; }
 
 Exit $fail
diff --git a/tests/t9041-undetected-in-use-16th-partition.sh b/tests/t9041-undetected-in-use-16th-partition.sh
index edaae1bf8116..673e508319a3 100644
--- a/tests/t9041-undetected-in-use-16th-partition.sh
+++ b/tests/t9041-undetected-in-use-16th-partition.sh
@@ -72,7 +72,7 @@ wait_for_dev_to_appear_ ${scsi_dev}16 || fail_ ${scsi_dev}16 did not appear
 
 partitions="${scsi_dev}14 ${scsi_dev}15 ${scsi_dev}16"
 for i in $partitions; do
-  mkfs.ext3 $i || skip_ mkfs.ext3 $i failed
+  mkfs.ext3 $i || fail=1
 done
 
 # be sure to unmount upon interrupt, failure, etc.

Places

File tests-use-wait_for_dev_to_-functions.patch of Package parted (Revision b93635dbfc8d9107e78a6da90ddc3c8e)

Places