openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File slurm.changes of Package slurm (Revision 2187e7705c244411d39bf679e2122d1d)

Currently displaying revision 2187e7705c244411d39bf679e2122d1d , Show latest

-------------------------------------------------------------------
Mon Mar 25 15:16:44 UTC 2024 - Christian Goll <cgoll@suse.com>

- removed Keep-logs-of-skipped-test-when-running-test-cases-sequentially.patch
  as incoperated upstream
* Changes in Slurm 23.02.5
 * Add the JobId to debug() messages indicating when cpus_per_task/mem_per_cpu
   or pn_min_cpus are being automatically adjusted.
 * Fix regression in 23.02.2 that caused slurmctld -R to crash on startup if
   a node features plugin is configured.
 * Fix and prevent reoccurring reservations from overlapping.
 * job_container/tmpfs - Avoid attempts to share BasePath between nodes.
 * Change the log message warning for rate limited users from verbose to info.
 * With CR_Cpu_Memory, fix node selection for jobs that request gres and
   *-mem-per-cpu.
 * Fix a regression from 22.05.7 in which some jobs were allocated too few
   nodes, thus overcommitting cpus to some tasks.
 * Fix a job being stuck in the completing state if the job ends while the
   primary controller is down or unresponsive and the backup controller has
   not yet taken over.
 * Fix slurmctld segfault when a node registers with a configured CpuSpecList
   while slurmctld configuration has the node without CpuSpecList.
 * Fix cloud nodes getting stuck in POWERED_DOWN+NO_RESPOND state after not
   registering by ResumeTimeout.
 * slurmstepd - Avoid cleanup of config.json-less containers spooldir getting
   skipped.
 * slurmstepd - Cleanup per task generated environment for containers in
   spooldir.
 * Fix scontrol segfault when 'completing' command requested repeatedly in
   interactive mode.
 * Properly handle a race condition between bind() and listen() calls in the
   network stack when running with SrunPortRange set.
 * Federation - Fix revoked jobs being returned regardless of the -a/--all
   option for privileged users.
 * Federation - Fix canceling pending federated jobs from non-origin clusters
   which could leave federated jobs orphaned from the origin cluster.
 * Fix sinfo segfault when printing multiple clusters with --noheader option.
 * Federation - fix clusters not syncing if clusters are added to a federation
   before they have registered with the dbd.
 * Change pmi2 plugin to honor the SrunPortRange option. This matches the new
   behavior of the pmix plugin in 23.02.0. Note that neither of these plugins
   makes use of the "MpiParams=ports=" option, and previously were only limited
   by the systems ephemeral port range.
 * node_features/helpers - Fix node selection for jobs requesting changeable
   features with the '|' operator, which could prevent jobs from running on
   some valid nodes.
 * node_features/helpers - Fix inconsistent handling of '&' and '|', where an
   AND'd feature was sometimes AND'd to all sets of features instead of just
   the current set. E.g. "foo|bar&baz" was interpreted as {foo,baz} or
   {bar,baz} instead of how it is documented: "{foo} or {bar,baz}".
 * Fix job accounting so that when a job is requeued its allocated node count
   is cleared. After the requeue, sacct will correctly show that the job has
   0 AllocNodes while it is pending or if it is canceled before restarting.
 * sacct - AllocCPUS now correctly shows 0 if a job has not yet received an
   allocation or if the job was canceled before getting one.
 * Fix intel oneapi autodetect: detect the /dev/dri/renderD[0-9]+ gpus, and do
   not detect /dev/dri/card[0*9]+.
 * Format batch, extern, interactive, and pending step ids into strings that
   are human readable.
 * Fix node selection for jobs that request --gpus and a number of tasks fewer
   than gpus, which resulted in incorrectly rejecting these jobs.
 * Remove MYSQL_OPT_RECONNECT completely.
 * Fix cloud nodes in POWERING_UP state disappearing (getting set to FUTURE)
   when an `scontrol reconfigure` happens.
 * openapi/dbv0.0.39 - Avoid assert / segfault on missing coordinators list.
 * slurmrestd - Correct memory leak while parsing OpenAPI specification
   templates with server overrides.
 * slurmrestd - Reduce memory usage when printing out job CPU frequency.
 * Fix overwriting user node reason with system message.
 * Remove --uid / --gid options from salloc and srun commands.
 * Prevent deadlock when rpc_queue is enabled.
 * slurmrestd - Correct OpenAPI specification generation bug where fields with
   overlapping parent paths would not get generated.
 * Fix memory leak as a result of a partition info query.
 * Fix memory leak as a result of a job info query.
 * slurmrestd - For 'GET /slurm/v0.0.39/node[s]', change format of node's
   energy field "current_watts" to a dictionary to account for unset value
   instead of dumping 4294967294.
 * slurmrestd - For 'GET /slurm/v0.0.39/qos', change format of QOS's
   field "priority" to a dictionary to account for unset value instead of
   dumping 4294967294.
 * slurmrestd - For 'GET /slurm/v0.0.39/job[s]', the 'return code' code field
   in v0.0.39_job_exit_code will be set to *127 instead of being left unset
   where job does not have a relevant return code.
 * data_parser/v0.0.39 - Add required/memory_per_cpu and
   required/memory_per_node to `sacct *-json` and `sacct --yaml` and
   'GET /slurmdb/v0.0.39/jobs' from slurmrestd.
 * For step allocations, fix --gres=none sometimes not ignoring gres from the
   job.
 * Fix --exclusive jobs incorrectly gang-scheduling where they shouldn't.
 * Fix allocations with CR_SOCKET, gres not assigned to a specific socket, and
   block core distribion potentially allocating more sockets than required.
 * gpu/oneapi - Store cores correctly so CPU affinity is tracked.
 * Revert a change in 23.02.3 where Slurm would kill a script's process group
   as soon as the script ended instead of waiting as long as any process in
   that process group held the stdout/stderr file descriptors open. That change
   broke some scripts that relied on the previous behavior. Setting time limits
   for scripts (such as PrologEpilogTimeout) is strongly encouraged to avoid
   Slurm waiting indefinitely for scripts to finish.
 * Allow slurmdbd -R to work if the root assoc id is not 1.
 * Fix slurmdbd -R not returning an error under certain conditions.
 * slurmdbd - Avoid potential NULL pointer dereference in the mysql plugin.
 * Revert a change in 23.02 where SLURM_NTASKS was no longer set in the job's
   environment when *-ntasks-per-node was requested.
 * Limit periodic node registrations to 50 instead of the full TreeWidth.
   Since unresolvable cloud/dynamic nodes must disable fanout by setting
   TreeWidth to a large number, this would cause all nodes to register at
   once.
 * Fix regression in 23.02.3 which broken x11 forwarding for hosts when
   MUNGE sends a localhost address in the encode host field. This is caused
   when the node hostname is mapped to 127.0.0.1 (or similar) in /etc/hosts.
 * openapi/[db]v0.0.39 - fix memory leak on parsing error.
 * data_parser/v0.0.39 - fix updating qos for associations.
 * openapi/dbv0.0.39 - fix updating values for associations with null users.
 * Fix minor memory leak with --tres-per-task and licenses.
 * Fix cyclic socket cpu distribution for tasks in a step where
   --cpus-per-task < usable threads per core.
- Changes in Slurm 23.02.4
  * Fix sbatch return code when **wait is requested on a job array.
  * switch/hpe_slingshot * avoid segfault when running with old libcxi.
  * Avoid slurmctld segfault when specifying AccountingStorageExternalHost.
  * Fix collected GPUUtilization values for acct_gather_profile plugins.
  * Fix slurmrestd handling of job hold/release operations.
  * Make spank S_JOB_ARGV item value hold the requested command argv instead of
    the srun **bcast value when **bcast requested (only in local context).
  * Fix step running indefinitely when slurmctld takes more than MessageTimeout
    to respond. Now, slurmctld will cancel the step when detected, preventing
    following steps from getting stuck waiting for resources to be released.
  * Fix regression to make job_desc.min_cpus accurate again in job_submit when
    requesting a job with **ntasks*per*node.
  * scontrol * Permit changes to StdErr and StdIn for pending jobs.
  * scontrol * Reset std{err,in,out} when set to empty string.
  * slurmrestd * mark environment as a required field for job submission
    descriptions.
  * slurmrestd * avoid dumping null in OpenAPI schema required fields.
  * data_parser/v0.0.39 * avoid rejecting valid memory_per_node formatted as
    dictionary provided with a job description.
  * data_parser/v0.0.39 * avoid rejecting valid memory_per_cpu formatted as
    dictionary provided with a job description.
  * slurmrestd * Return HTTP error code 404 when job query fails.
  * slurmrestd * Add return schema to error response to job and license query.
  * Fix handling of ArrayTaskThrottle in backfill.
  * Fix regression in 23.02.2 when checking gres state on slurmctld startup or
    reconfigure. Gres changes in the configuration were not updated on slurmctld
    startup. On startup or reconfigure, these messages were present in the log:
    "error: Attempt to change gres/gpu Count".
  * Fix potential double count of gres when dealing with limits.
  * switch/hpe_slingshot * support alternate traffic class names with "TC_"
    prefix.
  * scrontab * Fix cutting off the final character of quoted variables.
  * Fix slurmstepd segfault when ContainerPath is not set in oci.conf
  * Change the log message warning for rate limited users from debug to verbose.
  * Fixed an issue where jobs requesting licenses were incorrectly rejected.
  * smail * Fix issues where e*mails at job completion were not being sent.
  * scontrol/slurmctld * fix comma parsing when updating a reservation's nodes.
  * cgroup/v2 * Avoid capturing log output for ebpf when constraining devices,
    as this can lead to inadvertent failure if the log buffer is too small.
  * Fix **gpu*bind=single binding tasks to wrong gpus, leading to some gpus
    having more tasks than they should and other gpus being unused.
  * Fix main scheduler loop not starting after failover to backup controller.
  * Added error message when attempting to use sattach on batch or extern steps.
  * Fix regression in 23.02 that causes slurmstepd to crash when srun requests
    more than TreeWidth nodes in a step and uses the pmi2 or pmix plugin.
  * Reject job ArrayTaskThrottle update requests from unprivileged users.
  * data_parser/v0.0.39 * populate description fields of property objects in
    generated OpenAPI specifications where defined.
  * slurmstepd * Avoid segfault caused by ContainerPath not being terminated by
    '/' in oci.conf.
  * data_parser/v0.0.39 * Change v0.0.39_job_info response to tag exit_code
    field as being complex instead of only an unsigned integer.
  * job_container/tmpfs * Fix %h and %n substitution in BasePath where %h was
    substituted as the NodeName instead of the hostname, and %n was substituted
    as an empty string.
  * Fix regression where **cpu*bind=verbose would override TaskPluginParam.
  * scancel * Fix **clusters/*M for federations. Only filtered jobs (e.g. *A,
    *u, *p, etc.) from the specified clusters will be canceled, rather than all
    jobs in the federation. Specific jobids will still be routed to the origin
     cluster for cancellation.

-------------------------------------------------------------------
Mon Jan 29 13:47:55 UTC 2024 - Egbert Eich <eich@suse.com>

- Update to version 23.11.03
  * slurmrestd - Reject single http query with multiple path
    requests.
  * Fix launching Singularity v4.x containers with
    `srun --container` by setting .process.terminal to true in
    generated `config.json` when step has pseudoterminal (`--pty`)
    requested.
  * Fix loading in `dyanmic/cloud` node jobs after `net_cred`
    expired.
  * Fix cgroup null path error on `slurmd/slurmstepd` tear down.
  * `data_parser/v0.0.40` - Prevent failure if accounting is
    disabled, instead issue a warning if needed data from the
    database can not be retrieved.
  * `openapi/slurmctld` - Prevent failure if accounting is disabled.
  * Prevent `slurmscriptd` processing delays from blocking other
    threads in `slurmctld` while trying to launch various scripts.
    This is additional work for a fix in 23.02.6.
  * Fix memory leak when receiving alias addrs from controller.
  * `scontrol` - Accept `scontrol token lifespan=infinite` to
    create tokens that effectively do not expire.
  * Avoid errors when Slurmdb accounting disabled when `--json` or
    `--yaml` is invoked with CLI commands and `slurmrestd`. Add
    warnings when query would have populated data from Slurmdb
    instead of errors.
  * Fix `slurmctld` memory leak when running job with
    `--tres-per-task=gres:shard:#`
  * Fix backfill trying to start jobs outside of backfill window.
  * Fix oversubscription on partitions with `PreemptMode=OFF`.
  * Preserve node reason on power up if the node is downed
    or drained.
  * `data_parser/v0.0.40` - Avoid aborting when invoking a not
    implemented parser.
  * `data_parser/v0.0.40` - Fix how nice values are parsed for job
    submissions.
  * `data_parser/v0.0.40` - Fix regression where parsing error did
    not result in invalid request being rejected.
  * Fix segfault in front-end node registration.
  * Prevent jobs using none typed gpus from being killed by the
    controller after a reconfig or restart.
  * Fix deadlock situation in the dbd when adding associations.
  * Update default values of text/blob columns when updating from
    old mysql versions in more situations.  This improves a
    previous fix to handle an uncommon case when upgrading
    mysql/mariadb.
  * Fix rpmbuild in openSUSE/SLES due to incorrect mariadb
    dependency.
  * When upgrading the slurmdbd to 23.11, avoid generating a query
    to update the association table that is larger than
    `max_allowed_packet` which would result in an upgrade failure.
  * Fix rare deadlock when a dynamic node registers at the same
    time that a once per minute background task occurs.
  * `data_parser/v0.0.40` - Fix enumerated strings in OpenAPI
    specification not have type field specified.
  * Improve `scontrol show job -d` information of used shared
    gres (`shard/mps`) topology.
  * accounting_storage/mysql - Fix usage query to use new lineage
    column instead of lft/rgt.
  * `slurmrestd` - Improve handling of missing parsers when
    content plugins expect parsers not loaded.
  * `slurmrestd` - Correct parsing of StepIds when querying jobs.
  * `slurmrestd` - Improve error from parsing failures of lists.
  * `slurmrestd` - Improve parsing of singular values for lists.
  * `accounting_storage/mysql` - Fix `PrivateData=User` when
    listing associations.
  * Disable sorting of dynamic nodes to avoid issues when
    restarting with heterogenous jobs that cause jobs to abort on
    restart.
  * Don't allow deletion of non-dynamic nodes.
  * `accounting_storage/mysql` - Fix issue adding partition based
    associations.
  * Respect non-"slurm" settings for `I_MPI_HYDRA_BOOTSTRAP` and
    `HYDRA_BOOTSTRAP` and avoid injecting the `--external-launcher`
    option which will cause `mpirun/mpiexec` to fail with an
    unexpected argument error.
  * Fix bug where scontrol hold would change node count for jobs
    with implicitly defined node counts.
  * `data_parser/v0.0.40` - Fix regression of support for "hold"
    in job description.
  * Avoid sending KILL RPCs to unresolvable `POWERING_UP` and
    `POWERED_DOWN` nodes.
  * `data_parser/v0.0.38` - Fix several potential NULL
    dereferences that could cause slurmrestd to crash.
  * Add `--gres-flags=one-task-per-sharing`. Do not allow different
    tasks in to be allocated shared gres from the same sharing gres.
  * Add `SelectTypeParameters=ENFORCE_BINDING_GRES` and
    `ONE_TASK_PER_SHARING_GRES`.
    This gives default behavior for a job's `--gres-flags`.
  * Alter the networking code to try connecting to the backup
    controllers if the DNS lookup for the primary `SlurmctldHost`
    fails.
  * Alter the name resolution to only log at `verbose()` in client
    commands on failures. This allows for HA setups where the DNS
    entries are withdrawn for some `SlurmctldHost` entries without
    flooding the user with errors.
  * Prevent `slurmscriptd` PID leaks when running `slurmctld` in
    foreground mode.
  * Open all `slurmctld` listening ports at startup, and persist
    throughout.
    This also changes the backup `slurmctld` process to open the
    `SlurmctldPort` range, instead of only the first.
  * Fix backup `slurmctld` shutting down instead of resuming
    standby duty if it took control.
  * Fix race condition that delayed the primary `slurmctld`
    resuming when taking control from a backup controller.
  * `srun` - Ensure processed messages are meant for this job in
    case of a rapidly-reused TCP port.
  * `srun` - Prevent step launch failure while waiting for step
    allocation if a stray message is received.
  * Fix backup `slurmctld` to be able to respond to configless
    config file requests correctly.
  * Fix `slurmctld` crashing when recovering from a failed
    reconfigure.
  * Fix `slurmscriptd` operation after recovering from a failed
    reconfigure.
- Make sure `-std=gnu99` is added to CFLAGS on SLE-12.
- Use %%autopatch.

-------------------------------------------------------------------
Fri Jan 12 11:08:01 UTC 2024 - Christian Goll <cgoll@suse.com>

- Update to 23.11.1 with following major improvements and fixing
  CVE-2023-49933, CVE-2023-49934, CVE-2023-49935, CVE-2023-49936
  and CVE-2023-49937
  * Substantially overhauled the SlurmDBD association management
    code. For clusters updated to 23.11, account and user
    additions or removals are significantly faster than in prior
    releases.
  * Overhauled `scontrol reconfigure` to prevent configuration
    mistakes from disabling slurmctld and slurmd. Instead, an
    error will be returned, and the running configuration will
    persist. This does require updates to the systemd service
    files to use the `--systemd` option to `slurmctld` and `slurmd`.
  * Added a new internal `auth/cred` plugin - `auth/slurm`. This
    builds off the prior `auth/jwt` model, and permits operation
    of the `slurmdbd` and `slurmctld` without access to full
    directory information with a suitable configuration.
  * Added a new `--external-launcher` option to `srun`, which is
    automatically set by common MPI launcher implementations and
    ensures processes using those non-srun launchers have full
    access to all resources allocated on each node.
  * Reworked the dynamic/cloud modes of operation to allow for
    "fanout" - where Slurm communication can be automatically
    offloaded to compute nodes for increased cluster scalability.
  * Overhauled and extended the Reservation subsystem to allow
    for most of the same resource requirements as are placed on
    the job. Notably, this permits reservations to now reserve
    GRES directly.
- Details of changes:
  * Fix `scontrol update job=... TimeLimit+=/-=` when used with a
    raw JobId of job array element.
  * Reject `TimeLimit` increment/decrement when called on job with
    `TimeLimit=UNLIMITED`.
  * Fix issue with requesting a job with `*licenses` as well as
    `*tres-per-task=license`.
  * `slurmctld` - Prevent segfault in `getopt_long()` with an
    invalid long option.
  * slurmrestd - Added `/meta/slurm/cluster` field to responses.
  * Adjust systemd service files to start daemons after
    `remote-fs.target`.
  * Fix `task/cgroup` indexing tasks in cgroup plugins, which
    caused `jobacct/gather` to match the gathered stats with the
    wrong task id.
  * `select/linear` - Fix regression in 23.11 in which jobs that
    requested `*cpus-per-task` were rejected.
  * `data_parser/v0.0.40` - Fix the parsing for
    `/slurmdb/v0.0.40/jobs` exit_code query parameter.
  * If a job requests more shards which would allocate more than
    one sharing GRES (gpu) per node refuse it unless
    `SelectTypeparameters` has `MULTIPLE_SHARING_GRES_PJ`.
  * Trigger fatal exit when Slurm API function is called before
    `slurm_init()` is called.
  * `slurmd` - Fix issue with `scontrol reconfigure` when started
    with `-c`.
  * `slurmrestd` - Job submissions that result in the following
    error codes will be considered as successfully submitted (with
    a warning), instead of returning an HTTP 500 error back:
    `ESLURM_NODES_BUSY`, `ESLURM_RESERVATION_BUSY`, `ESLURM_JOB_HELD`,
    `ESLURM_NODE_NOT_AVAIL`, `ESLURM_QOS_THRES`,
    `ESLURM_ACCOUNTING_POLICY`, `ESLURM_RESERVATION_NOT_USABLE`,
    `ESLURM_REQUESTED_PART_CONFIG_UNAVAILABLE`,
    `ESLURM_BURST_BUFFER_WAIT`, ESLURM_PARTITION_DOWN`,
    `ESLURM_LICENSES_UNAVAILABLE`.
  * Fix a `slurmctld` fatal error when upgrading to 23.11 and
    changing from `select/cons_res` to `select/cons_tres` at the
    same time.
  * `slurmctld` - Reject arbitrary distribution jobs that have a
    minimum node count that differs from the number of unique
    nodes in the hostlist.
  * Prevent `slurmdbd` errors when updating reservations with names
    containing apostrophes.
  * Prevent message extension attacks that could bypass the
    message hash. CVE-2023-49933.
  * Prevent SQL injection attacks in `slurmdbd`. CVE-2023-49934.
  * Prevent message hash bypass in slurmd which can allow an
    attacker to reuse root-level MUNGE tokens and escalate
    permissions. CVE-2023-49935.
  * Prevent NULL pointer dereference on size_valp overflow.
    CVE-2023-49936.
  * Prevent double-xfree() on error in `_unpack_node_reg_resp()`.
    CVE-2023-49937.
  * For jobs that request  `*cpus-per-gpu`, ensure that the
    `*cpus-per-gpu request` is honored on every node in the and
    not just for the job as a whole.
  * Fix listing available `data_parser` plugins for json and yaml
    when giving no commands to `scontrol` or `sacctmgr`.
  * `slurmctld` - Rework `scontrol reconfigure` to avoid race
    conditions that can result in stray jobs.
  * `slurmctld` - Shave ~1 second off average reconfigure time by
    terminating internal processing threads faster.
  * Skip running `slurmdbd -R` if the connected cluster is 23.11
    or newer. This operation is no longer relevant for 23.11.
  * Ensure `slurmscriptd` shuts down before `slurmctld` is stopped
    or reconfigured.
  * Improve error handling and error messages in `slurmctld` to
    `slurmscriptd` communications. This includes avoiding
    potential deadlock in `slurmctld` if slurmscript dies
    unexpectedly.
  * Do not hold batch jobs whose extra constraints cannot be
    immediately satisfied, and set the state reason to
    `Constraints` instead of `BadConstraints`.
  * Fix verbose log message printing a hex number instead of a job
    id.
  * Upgrade rate limit parameters message from debug to info.
  * For `SchedulerParameters=extra_constraints`, prevent `slurmctld`
    segfault when starting a `slurmd` with `*extra` for a node
    that did not previously set this.
    This also ensures the extra constraints model works off the
    current node state, not the prior state.
  * Fix `*tres-per-task` assertion.
  * Fix a few issues when creating reservations.
  * Add `SchedulerParameters=time_min_as_soft_limit` option.
  * Remove `SLURM_WORKING_CLUSTER` env from batch and srun
    environments.
  * `cli_filter/lua` - return nil for unset time options rather
    than the string `2982616-04:14:00` (which is the internal
    macro `NO_VAL` represented as time string).
  * Remove 'none' plugins for all but auth and cred. scontrol show
    config will report (null) now.
  * Removed `select/cons_res`. Please update your configuration to
    `select/cons_tres`.
  * `mpi/pmix` - When aborted with status 0, avoid marking
    job/step as failed.
  * Fixed typo on `initialized` for the description of
    `ESLURM_PLUGIN_NOT_LOADED`.
  * `cgroup.conf` - Removed deprecated parameters `AllowedKmemSpace`,
    `ConstrainKmemSpace`, `MaxKmemPercent`, and `MinKmemSpace`.
  * `proctrack/cgroup` - Add `SignalChildrenProcesses=<yes|no>`
    option to `cgroup.conf`. This allows signals for cancelling,
    suspending, resuming, etc. to be sent to children processes in
    a `step/job` rather than just the parent.
  * Add `PreemptParameters=suspend_grace_time` parameter to
    control amount of time between `SIGTSTP` and `SIGSTOP` signals
    when suspending jobs.
  * `job_submit/throttle` - improve reset of submitted job counts
    per user in order to better honor
    `SchedulerParameters=jobs_per_user_per_hour=#`.
  * Load the user environment into a private pid namespace to
    avoid user scripts leaving background processes on a node.
  * `scontrol` show `assoc_mgr` will display Lineage instead of Lft
    for associations.
  * Add `SlurmctldParameters=no_quick_restart` to avoid a new
    `slurmctld` taking over the old `slurmctld` by accident.
  * Fix `--cpus-per-gpu` for step allocations, which was
    previously ignored for job steps. `*cpus-per-gpu` implies
    `--exact`.
  * Fix mutual exclusivity of `--cpus-per-gpu` and
    `--cpus-per-task`:  fatal if both options are requested in the
    commandline or both are requested in the environment. If one
    option is requested in the command line, it will override the
    other option in the environment.
  * `slurmrestd` - `openapi/dbv0.0.37` and `openapi/v0.0.37`
    plugins have been removed.
  * `slurmrestd` - `openapi/dbv0.0.38` and `openapi/v0.0.38`
    plugins have been tagged as deprecated.
  * `slurmrestd` - added auto population of `info/version` field.
  * `sdiag` - add `--yaml` and `--json` arg support to specify
    data_parser plugin.
  * `sacct` - add `--yaml` and `--json` arg support to specify
    `data_parser` plugin.
  * `scontrol` - add `--yaml` and `--json` arg support to specify
    `data_parser` plugin.
  * `sinfo` - add `--yaml` and `--json` arg support to specify
    `data_parser` plugin.
  * `squeue` - add `--yaml` and `--json` arg support to specify
    `data_parser` plugin.
  * Changed the default `SelectType` to `select/cons_tres` (from
    `select/linear`).
  * Allow `SlurmUser`/`root` to use reservations without specific
    permissions.
  * Fix sending step signals to nodes not allocated by the step.
  * Remove `CgroupAutomount=` option from `cgroup.conf`.
  * Add `TopologyRoute=RoutePart` to route communications based
    on partition node lists.
  * Added ability for configless to push Prolog and Epilog
    scripts to `slurmd`s.
  * Prolog and Epilog do not have to be fully qualified pathnames.
  * Changed default value of `PriorityType` from `priority/basic`
    to `priority/multifactor`.
  * `torque/mpiexec` - Propogate exit code from `launched` process.
  * `slurmrestd` - Add new rlimits fields for job submission.
  * Define SPANK options environment variables when
    `--export=[NIL|NONE]` is specified.
  * `slurmrestd` - Numeric input fields provided with a null
    formatted value will now convert to zero (0) where it can be
    a valid value. This is expected to be only be notable with job
    submission against v0.0.38 versioned endpoints with job
    requests with fields provided with null values. These fields
    were already rejected by v0.0.39+ endpoints, unless `+complex`
    parser value is provided to v0.0.40+ endpoints.
  * `slurmrestd` - Improve parsing of integers and floating point
    numbers when handling incoming user provided numeric fields.
    Fields that would have not rejected a number for a numeric
    field followed by other non-numeric characters will now get
    rejected. This is expected to be only be notable with job
    submission against v0.0.38 versioned endpoints with malformed
    job requests.
  * Reject reservation update if it will result in previously
    submitted jobs losing access to the reservation.
  * `data_parser/v0.0.40` - output partition state when dumping
    partitions.
  * Allow for a shared suffix to be used with the hostlist format.
    E.g., `node[0001-0010]-int`.
  * Replace `SRUN_CPUS_PER_TASK` with `SLURM_CPUS_PER_TASK` and
    get back the previous behavior before Slurm 22.05 since now we
    have the new external launcher step.
  * `job_container/tmpfs` - Add `BasePath=none` option to disable
    plugin on node subsets when there is a global setting.
  * Add QOS flag `Relative`. If set the QOS limits will be treated
    as percentages of a cluster/partition instead of absolutes.
  * Remove `FIRST_CORES` flag from reservations.
  * Add cloud instance id and instance type to node records.
    Can be viewed/updated with `scontrol`.
  * `slurmd` - add `instance-id`, `instance-type`, and `extra`
    options to allow them to be set on startup.
  * Add cloud instance accounting to database that can be viewed
    with `sacctmgr show instance`.
  * `select/linear` - fix task launch failure that sometimes
    occurred when requesting  `*threads-per-core` or
    `--hint=nomultithread`. This also fixes memory calculation
    with one of these options and  `*mem-per-cpu`:
    Previously, memory = mem-per-cpu * all cpus including unusable
    threads.
    Now, memory = mem-per-cpu * only usuable threads. This
    behavior matches the documentation and select/cons_tres.
  * `gpu/nvml` - Reduce chances of `NVML_ERROR_INSUFFICIENT_SIZE`
    error when getting gpu memory information.
  * `slurmrestd` - Convert to generating `OperationIDs` based on
    path for all v0.0.40 tagged paths.
  * `slurmrestd` - Reduce memory used while dumping a job's stdio
    paths.
  * `slurmrestd` - Jobs queried from `data_parser/v0.0.40` from
    `slurmdb` will have `step/id` field given as a string to match
    CLI formatting instead of an object.
  * `sacct` - Output in JSON or YAML output will will have the
    `step/id` field given as a string instead of an object.
  * `scontrol`/`squeue` - Step output in JSON or YAML output will
    will have the `id` field given as a string instead of an
    object.
  * `slurmrestd` - For `GET /slurmdb/v0.0.40/jobs` mimick default
    behavior for handling of job start and end times as `sacct`
    when one or both fields are not provided as a query parameter.
  * `openapi/slurmctld` - Add `GET /slurm/v0.0.40/shares` endpoint
    to dump same output as `sshare`.
  * `sshare` - add JSON/YAML support.
  * `data_parser/v0.0.40` - Remove `required/memory` output in
    json. It is replaced by `required/memory_per_cpu` and
    `required/memory_per_node`.
  * `slurmrestd` - Add numeric id to all association identifiers
    to allow unique identification where association has been
    deleted but is still referenced by accounting record.
  * `slurmrestd` - Add accounting, id, and comment fields to
    association dumps.
  * Use `memory.current` in cgroup/v2 instead of manually
    calculating RSS. This makes accounting consistent with
    OOM Killer.
  * `sreport` - cluster Utilization `PlannedDown` field now
    includes the time that all nodes were in the `POWERED_DOWN`
    state instead of just cloud nodes.
  * `scontrol` update partition now allows `Nodes+=<node-list>` and
    `Nodes-=<node-list>` to add/delete nodes from the existing
    partition node list. `Nodes=+host1,-host2` is also allowed.
  * `sacctmgr` - add `--yaml` and `--json` arg support to specify
    `data_parser` plugin.
  * `sacctmgr` can now modify QOS's RawUsage to zero or a positive
    value.
  * `sdiag` - Added statistics on why the main and backfill
    schedulers have stopped evaluation on each scheduling cycle.
    the number of `RPC limit exceeded...` messages that are logged.
  * Rename `sbcast --fanout` to `--treewidth`.
  * Remove `SLURM_NODE_ALIASES` env variable.
  * Enable fanout for dynamic and unaddresable cloud nodes.
  * Fix how steps are dealloced in an allocation if the last step
    of an srun never completes due to a node failure.
  * Remove redundant database indexes.
  * Add database index to suspend table to speed up archive/purges.
  * When requesting `--tres-per-task` alter incorrect request for
    TRES, it should be `TRESType/TRESName` not `TRESType:TRESName`.
  * Make it so reservations can reserve GRES.
  * `sbcast` - use the specified `--fanout` value on all hops in
    message forwarding; previously the specified fanout was only
    used on the first hop, and additional hops used `TreeWidth` in
    `slurm.conf`.
  * `slurmrestd`- remove logger prefix from `-s/-a list` options
    outputs.
  * `switch/hpe_slingshot` - Add support for collectives.
  * Nodes with suspended jobs can now be displayed as `MIXED`.
  * Fix inconsistent handling of using cli and/or environment
    options for `tres_per_task=cpu:#` and `cpus_per_gpu`.
  * Requesting `--cpus-per-task` will now set
    `SLURM_TRES_PER_TASK=cpu:#` in the  environment.
  * For some tres related environment variables such as
    `SLURM_TRES_PER_TASK`, when `srun` requests a different value
    for that option, set these environment variables to the value
    requested by `srun`. Previously these environment variables
    were unchanged from the job allocation. This bug only affected
    the output environment variables, not the actual step resource
    allocation.
  * `RoutePlugin=route/topology` has been replaced with
    `TopologyParam=RouteTree`.
  * If `ThreadsPerCore` in `slurm.conf` is configured with less
    than the number of hardware threads, fix a bug where the task
    plugins used fewer cores instead of using fewer threads per core.
  * Fix arbitrary distribution allowing it to be used with `salloc`
    and `sbatch` and fix how cpus are allocated to nodes.
  * Allow nodes to reboot while node is drained or in a
    maintenance state.
  * Allow `scontrol` reboot to use nodesets to filter nodes to reboot.
  * Fix how the topology of typed gres gets updated.
  * Changes to the Type option in gres.conf now can be applied with
    `scontrol` reconfig.
  * Allow for jobs that request a newly configured gres type to be
    queued even when the needed `slurmd`s have not yet registered.
  * Kill recovered jobs that require unconfigured gres types.
  * If keepalives are configured, enable them on all persistent
    connections.
  * Configless - Also send Includes from configuration files not
    parsed by the controller (i.e. from `plugstack.conf`).
  * Add `gpu/nrt` plugin for nodes using Trainium/Inferentia
    devices.
  * `data_parser/v0.0.40` - Add `START_RECEIVED` to job flags in
    dumped output.
  * SPANK - Failures from most spank functions (not epilog or
    exit) will now cause the step to be marked as failed and the
    command (`srun`, `salloc`, `sbatch  *wait`) to return 1.

-------------------------------------------------------------------
Wed Jan  3 10:45:48 UTC 2024 - Egbert Eich <eich@suse.com>

- Update to 23.02.6 to fix (CVE-2023-49933 - bsc#1218046, CVE-2023-49935 -
  bsc#1218049, CVE-2023-49936 - bsc#1218050, CVE-2023-49937 - bsc#1218051,
  CVE-2023-49938 - bsc#1218053)
  * Security Fixes:
    + Add `JobAcctGatherParams=DisableGPUAcct` to disable gpu accounting.
    + `acct_gather_energy/ipmi` - Improve logging of DCMI issues.
    + `gpu/oneapi` - Add support for new env vars `ZE_FLAT_DEVICE_HIERARCHY`
      and `ZE_ENABLE_PCI_ID_DEVICE_ORDER`.
    + `data_parser/v0.0.39` - skip empty string when parsing QOS ids.
    + Remove error message from `assoc_mgr_update_assocs` when purposefully
      resetting the default QOS.
  * Bug Fixes:
    + `libslurm_nss` - Avoid causing glibc to assert due to an unexpected
      return from slurm_nss due to an error during lookup.
    + Fix job requests with `--tres-per-task` sometimes resulting in bad
      allocations that cannot run subsequent job steps.
    + Fix issue with `slurmd` where `srun` fails to be warned when a node
      prolog script runs beyond `MsgTimeout` set in `slurm.conf`.
    + `gres/shard` - Fix plugin functions to have matching parameter orders.
    + `gpu/nvml` - Fix issue that resulted in the wrong MIG devices being
      constrained to a job
    + `gpu/nvml` - Fix linking issue with MIGs that prevented multiple MIGs
      being used in a single job for certain MIG configurations
    + Fix file descriptor leak in slurmd when using `acct_gather_energy/ipmi`
      with DCMI devices.
    + `sview` - avoid crash when job has a node list string > 49 characters.
    + Prevent `slurmctld` crash during reconfigure when packing job start
      messages.
    + Preserve reason uid on reconfig.
    + Update node reason with updated `INVAL` state reason if different from
      last registration.
    + `conmgr` - Avoid NULL dereference when using `auth/none`.
    + `data_parser/v0.0.39` - Fixed how deleted QOS and associations for jobs
      are dumped.
    + `burst_buffer/lua` - fix stage in counter not decrementing when a job is
      cancelled during stage in. This counter is used to enforce the limit of
      128 scripts per stage.
    + `data_parser/v0.0.39` - Fix how the `INVALID` nodes state is dumped.
    + `data_parser/v0.0.39` - Fix parsing of flag arrays to allow muliple
      flags to be set.
    + Avoid leaking sockets when an x11 application is closed in an allocation.
    + Fix missing mutex unlock in group cache code which could cause slurmctld
      to freeze.
    + Fix scrontab monthly jobs possibly skipping a month if added near the
      end of the month.
    + Fix loading of the gpu account gather energy plugin.
    + Fix `slurmctld` segfault when reconfiguring after a job resize.
    + Fix crash in slurmstepd that can occur when launching tasks via mpi using
      the `pmi2` plugin and using the `route/topology` plugin.
    + Fix `qos <id> doesn't exist` error message in `assoc_mgr_update_assocs`
      to print the attempted new default qos, rather than the current default
      qos.
    + `data_parser/v0.0.39` - Fix segfault when POSTing data with association
      usage.
  * Other Changes and Improvements:
    + Prevent message extension attacks that could bypass the message hash.
      CVE-2023-49933.
    + Prevent message hash bypass in slurmd which can allow an attacker to
      reuse root-level MUNGE tokens and escalate permissions. CVE-2023-49935.
    + Prevent NULL pointer dereference on `size_valp` overflow. CVE-2023-49936.
    + Prevent double-xfree() on error in `_unpack_node_reg_resp()`.
      CVE-2023-49937.
    + Prevent modified `sbcast` RPCs from opening a file with the wrong group
      permissions. CVE-2023-49938.
- Fix %do_obsoletes macro expansion to work with SLE-12.

-------------------------------------------------------------------
Thu Nov 30 18:52:44 UTC 2023 - Egbert Eich <eich@suse.com>

- Add missing service file for slurmrestd (boo#1217711).

-------------------------------------------------------------------
Tue Nov 28 14:14:28 UTC 2023 - Egbert Eich <eich@suse.com>

- Explicitly create an Obsoletes: entry for each package version
  that is obsoleted by the present version. These are all published
  versions of the last two major releases as well as all minor
  versions of the present release lower than the current one
  (bsc#1216869 2nd part).
  This prevents the current version to upgrade a old Slurm version
  for which no upgrade path exists.

-------------------------------------------------------------------
Mon Nov 20 15:29:55 UTC 2023 - Egbert Eich <eich@suse.com>

- On SLE-12 exclude build for s390x.

-------------------------------------------------------------------
Mon Nov  6 07:38:00 UTC 2023 - Egbert Eich <eich@suse.com>

- Add missing dependencies to slurm-config to plugins package.
  These should help to tie down the slurm version and help to avoid
  a package mix (bsc#1216869).

-------------------------------------------------------------------
Thu Oct 12 08:23:20 UTC 2023 - Christian Goll <cgoll@suse.com>

- update to 23.02.6 to fix (CVE-2023-41914, bsc#1216207)
  * Removed Fix-test-32.8.patch as fixed upstream
  * Bug Fixes:
    + Fix `CpusPerTres=` not upgreadable with scontrol update
    + Fix unintentional gres removal when validating the gres job state.
    + Fix `--without-hpe-slingshot` configure option.
    + Fix cgroup v2 memory calculations when transparent huge pages are used.
    + Fix parsing of `sgather --timeout` option.
    + Fix regression from 22.05.0 that caused `srun --cpu-bind "=verbose"`
      and `"=v"` options give different CPU bind masks.
    + Fix "_find_node_record: lookup failure for node" error message appearing
      for all dynamic nodes during reconfigure.
    + Avoid segfault if loading serializer plugin fails.
    + `slurmrestd` - Correct OpenAPI format for `GET /slurm/v0.0.39/licenses`.
    + `slurmrestd` - Correct OpenAPI format for
      `GET /slurm/v0.0.39/job/{job_id}`.
    + `slurmrestd` - Change format to multiple fields in
      `GET /slurmdb/v0.0.39/assocations` and `GET /slurmdb/v0.0.39/qos` to
      handle infinite and unset states.
    + When a node fails in a job with `--no-kill`, preserve the extern step on the
      remaining nodes to avoid breaking features that rely on the extern step
      such as `pam_slurm_adopt`, `x11`, and `job_container/tmpfs`.
    + `auth/jwt` - Ignore `x5c` field in JWKS files.
    + `auth/jwt` - Treat 'alg' field as optional in JWKS files.
    + Allow job_desc.selinux_context to be read from the job_submit.lua script.
    + Skip check in slurmstepd that causes a large number of errors in the
      munge log: "Unauthorized credential for client UID=0 GID=0".
      This error will still appear on `slurmd`/`slurmctld`/`slurmdbd` start up
      and is not a cause for concern.
    + `slurmctld` - Allow startup with zero partitions.
    + Fix some mig profile names in slurm not matching nvidia mig profiles.
    + Prevent `slurmscriptd` processing delays from blocking other threads in
      `slurmctld` while trying to launch `{Prolog|Epilog}Slurmctld`.
    + Fix sacct printing ReqMem field when memory doesn't exist in requested
      TRES.
    + Fix how heterogenous steps in an allocation with `CR_PACK_NODE` or
      `-mpack` are created.
    + Fix `slurmctld` crash from race condition within `job_submit_throttle`
      plugin.
    + Fix `--with-systemdsystemunitdir` when requesting a default location.
    + Fix not being able to cancel an array task by the jobid (i.e. not
      `<jobid>_<taskid>`) through scancel, job launch failure or prolog
      failure.
    + Fix cancelling the whole array job when the array task is the meta job
      and it fails job or prolog launch and is not requeable. Cancel only the
      specific task instead.
    + Fix regression in 21.08.2 where MailProg did not run for `mail-type=end`
      for jobs with non+zero exit codes.
    + Fix incorrect setting of memory.swap.max in cgroup/v2.
    + Fix `jobacctgather/cgroup` collection of disk/io, gpumem, gpuutil TRES
      values.
    + Fix -d singleton for heterogeneous jobs.
    + Downgrade info logs about a job meeting a "maximum node limit" in the
      select plugin to `DebugFlags=SelectType`. These info logs could spam the
      slurmctld log file under certain circumstances.
    + `prep/script` - Fix `[Srun|Task]<Prolog|Epilog>` missing
      `SLURM_JOB_NODELIST`.
    + gres - Rebuild GRES core bitmap for nodes at startup. This fixes error:
      "Core bitmaps size mismatch on node [HOSTNAME]", which causes jobs to
      enter state "Requested node configuration is not available".
    + `slurmctd` - Allow startup with zero nodes.
    + Fix filesystem handling race conditions that could lead to an attacker
      taking control of an arbitrary file, or removing entire directories'
      contents. CVE-2023-41914.

-------------------------------------------------------------------
Mon Sep 18 05:23:19 UTC 2023 - Egbert Eich <eich@suse.com>

- Updated to version 23.02.5 with the following changes:
  * Bug Fixes:
    + Revert a change in 23.02 where `SLURM_NTASKS` was no longer set in the
      job's environment when `--ntasks-per-node` was requested.
      The method that is is being set, however, is different and should be more
      accurate in more situations.
    + Change pmi2 plugin to honor the `SrunPortRange` option. This matches the
      new behavior of the pmix plugin in 23.02.0. Note that neither of these
      plugins makes use of the `MpiParams=ports=` option, and previously
      were only limited by the systems ephemeral port range.
    + Fix regression in 23.02.2 that caused slurmctld -R to crash on startup if
      a node features plugin is configured.
    + Fix and prevent reoccurring reservations from overlapping.
    + `job_container/tmpfs` - Avoid attempts to share BasePath between nodes.
    + With `CR_Cpu_Memory`, fix node selection for jobs that request gres and
      `--mem-per-cpu`.
    + Fix a regression from 22.05.7 in which some jobs were allocated too few
      nodes, thus overcommitting cpus to some tasks.
    + Fix a job being stuck in the completing state if the job ends while the
      primary controller is down or unresponsive and the backup controller has
      not yet taken over.
    + Fix `slurmctld` segfault when a node registers with a configured
      `CpuSpecList` while `slurmctld` configuration has the node without
      `CpuSpecList`.
    + Fix cloud nodes getting stuck in `POWERED_DOWN+NO_RESPOND` state after
      not registering by `ResumeTimeout`.
    + `slurmstepd` - Avoid cleanup of `config.json-less` containers spooldir
      getting skipped.
    + Fix scontrol segfault when 'completing' command requested repeatedly in
      interactive mode.
    + Properly handle a race condition between `bind()` and `listen()` calls
      in the network stack when running with SrunPortRange set.
    + Federation - Fix revoked jobs being returned regardless of the
      `-a`/`--all` option for privileged users.
    + Federation - Fix canceling pending federated jobs from non-origin
      clusters which could leave federated jobs orphaned from the origin
      cluster.
    + Fix sinfo segfault when printing multiple clusters with `--noheader`
      option.
    + Federation - fix clusters not syncing if clusters are added to a
      federation before they have registered with the dbd.
    + `node_features/helpers` - Fix node selection for jobs requesting
      changeable.
      features with the `|` operator, which could prevent jobs from
      running on some valid nodes.
    + `node_features/helpers` - Fix inconsistent handling of `&` and `|`,
      where an AND'd feature was sometimes AND'd to all sets of features
      instead of just the current set. E.g. `foo|bar&baz` was interpreted
      as `{foo,baz}` or `{bar,baz}` instead of how it is documented:
      `{foo} or {bar,baz}`.
    + Fix job accounting so that when a job is requeued its allocated node
      count is cleared. After the requeue, sacct will correctly show that
      the job has 0 `AllocNodes` while it is pending or if it is canceled
      before restarting.
    + `sacct` - `AllocCPUS` now correctly shows 0 if a job has not yet
      received an allocation or if the job was canceled before getting one.
    + Fix intel OneAPI autodetect: detect the `/dev/dri/renderD[0-9]+` GPUs,
      and do not detect `/dev/dri/card[0-9]+`.
    + Fix node selection for jobs that request `--gpus` and a number of
      tasks fewer than GPUs, which resulted in incorrectly rejecting these
      jobs.
    + Remove `MYSQL_OPT_RECONNECT` completely.
    + Fix cloud nodes in `POWERING_UP` state disappearing (getting set
      to `FUTURE`)
      when an `scontrol reconfigure` happens.
    + `openapi/dbv0.0.39` - Avoid assert / segfault on missing coordinators
      list.
    + `slurmrestd` - Correct memory leak while parsing OpenAPI specification
      templates with server overrides.
    + Fix overwriting user node reason with system message.
    + Prevent deadlock when `rpc_queue` is enabled.
    + `slurmrestd` - Correct OpenAPI specification generation bug where
      fields with overlapping parent paths would not get generated.
    + Fix memory leak as a result of a partition info query.
    + Fix memory leak as a result of a job info query.
    + For step allocations, fix `--gres=none` sometimes not ignoring gres
      from the job.
    + Fix `--exclusive` jobs incorrectly gang-scheduling where they shouldn't.
    + Fix allocations with `CR_SOCKET`, gres not assigned to a specific
      socket, and block core distribion potentially allocating more sockets
      than required.
    + Revert a change in 23.02.3 where Slurm would kill a script's process
      group as soon as the script ended instead of waiting as long as any
      process in that process group held the stdout/stderr file descriptors
      open. That change broke some scripts that relied on the previous
      behavior. Setting time limits for scripts (such as
      `PrologEpilogTimeout`) is strongly encouraged to avoid Slurm waiting
      indefinitely for scripts to finish.
    + Fix `slurmdbd -R` not returning an error under certain conditions.
    + `slurmdbd` - Avoid potential NULL pointer dereference in the mysql
      plugin.
    + Fix regression in 23.02.3 which broken X11 forwarding for hosts when
      MUNGE sends a localhost address in the encode host field. This is caused
      when the node hostname is mapped to 127.0.0.1 (or similar) in
      `/etc/hosts`.
    + `openapi/[db]v0.0.39` - fix memory leak on parsing error.
    + `data_parser/v0.0.39` - fix updating qos for associations.
    + `openapi/dbv0.0.39` - fix updating values for associations with null
      users.
    + Fix minor memory leak with `--tres-per-task` and licenses.
    + Fix cyclic socket cpu distribution for tasks in a step where
      `--cpus-per-task` < usable threads per core.
    + `slurmrestd` - For `GET /slurm/v0.0.39/node[s]`, change format of
      node's energy field `current_watts` to a dictionary to account for
      unset value instead of dumping 4294967294.
    + `slurmrestd` - For `GET /slurm/v0.0.39/qos`, change format of QOS's
      field "priority" to a dictionary to account for unset value instead of
      dumping 4294967294.
    + slurmrestd - For `GET /slurm/v0.0.39/job[s]`, the 'return code'
      code field in `v0.0.39_job_exit`_code will be set to -127 instead of
      being left unset where job does not have a relevant return code.
  * Other Changes:
    + Remove --uid / --gid options from salloc and srun commands. These options
      did not work correctly since the CVE-2022-29500 fix in combination with
      some changes made in 23.02.0.
    + Add the `JobId` to `debug()` messages indicating when
      `cpus_per_task/mem_per_cpu` or `pn_min_cpus` are being automatically
      adjusted.
    + Change the log message warning for rate limited users from verbose to
      info.
    + `slurmstepd` - Cleanup per task generated environment for containers in
      spooldir.
    + Format batch, extern, interactive, and pending step ids into strings that
      are human readable.
    + `slurmrestd` - Reduce memory usage when printing out job CPU frequency.
    + `data_parser/v0.0.39` - Add `required/memory_per_cpu` and
      `required/memory_per_node` to `sacct --json` and `sacct --yaml` and
      `GET /slurmdb/v0.0.39/jobs` from slurmrestd.
    + `gpu/oneapi` - Store cores correctly so CPU affinity is tracked.
    + Allow `slurmdbd -R` to work if the root assoc id is not 1.
    + Limit periodic node registrations to 50 instead of the full `TreeWidth`.
      Since unresolvable `cloud/dynamic` nodes must disable fanout by setting
      `TreeWidth` to a large number, this would cause all nodes to register at
      once.

-------------------------------------------------------------------
Mon Aug 21 09:43:08 UTC 2023 - Christian Goll <cgoll@suse.com>

- Updated to 23.02.4 with the following changes:
  * Bug Fixes:
    + Fix main scheduler loop not starting after a failover to backup
      controller. Avoid slurmctld segfault when specifying
     `AccountingStorageExternalHost` (bsc#1214983).
    + Fix sbatch return code when `--wait` is requested on a job array.
    + Fix collected `GPUUtilization` values for `acct_gather_profile` plugins.
    + Fix `slurmrestd` handling of job hold/release operations.
    + Fix step running indefinitely when slurmctld takes more than
      `MessageTimeout` to respond. Now, `slurmctld` will cancel the step when
       detected, preventing following steps from getting stuck waiting for
       resources to be released.
    + Fix regression to make `job_desc.min_cpus` accurate again in `job_submit`
      when requesting a job with `--ntasks-per-node`.
    + Fix handling of `ArrayTaskThrottle` in backfill.
    + Fix regression in 23.02.2 when checking gres state on `slurmctld`
      startup  or reconfigure. Gres changes in the configuration were not
      updated on slurmctld startup. On startup or reconfigure, these messages
      were present in the log: `error: Attempt to change gres/gpu Count`.
    + Fix potential double count of gres when dealing with limits.
    + Fix `slurmstepd` segfault when `ContainerPath` is not set in `oci.conf`
    + Fixed an issue where jobs requesting licenses were incorrectly rejected.
    + `scrontab` - Fix cutting off the final character of quoted variables.
    + `smail` - Fix issues where e-mails at job completion were not being sent.
    + `scontrol/slurmctld` - fix comma parsing when updating a reservation's
       nodes.
    + Fix `--gpu-bind=single binding` tasks to wrong gpus, leading to some gpus
      having more tasks than they should and other gpus being unused.
    + Fix regression in 23.02 that causes slurmstepd to crash when `srun`
      requests more than `TreeWidth` nodes in a step and uses the pmi2 or
      pmix plugin.
    + `job_container/tmpfs` - Fix `%h` and `%n` substitution in `BasePath`
      where `%h` was substituted as the NodeName instead of the hostname,
      and %n was substituted as an empty string.
    + Fix regression where `--cpu-bind=verbose` would override
      `TaskPluginParam`.
    + `scancel` - Fix `--clusters/-M` for federations. Only filtered jobs
      (e.g. `-A`, `-u`, `-p`, etc.) from the specified clusters will be
      canceled, rather than all jobs in the federation. Specific jobids
      will still be routed to the origin cluster for cancellation.
  * Other changes:
    + Make spank `S_JOB_ARGV` item value hold the requested command `argv`
      instead of the `srun --bcast` value when `--bcast` requested (only in
      local context).
    + `scontrol` - Permit changes to StdErr and StdIn for pending jobs.
    + `scontrol` - Reset `std`{`err`,`in`,`out`} when set to empty string.
    + `slurmrestd` - mark environment as a required field for job submission
      descriptions.
    + `slurmrestd` - avoid dumping null in OpenAPI schema required fields.
    + `data_parser/v0.0.39` - avoid rejecting valid `memory_per_node` formatted
      as dictionary provided with a job description.
    + `data_parser/v0.0.39` - avoid rejecting valid `memory_per_cpu` formatted
       as dictionary provided with a job description.
    + `slurmrestd` - Return HTTP error code 404 when job query fails.
    + `slurmrestd` - Add return schema to error response to job and license
      query.
    + Change the log message warning for rate limited users from debug to
      verbose.
    + `cgroup/v2` - Avoid capturing log output for ebpf when constraining
      devices,
      as this can lead to inadvertent failure if the log buffer is too small.
    + Added error message when attempting to use sattach on batch or extern
      steps.
    + Reject job `ArrayTaskThrottle` update requests from unprivileged users.
    + `data_parser/v0.0.39` - populate description fields of property objects
      in generated OpenAPI specifications where defined.
    + `slurmstepd` - Avoid segfault caused by `ContainerPath` not being
      terminated by `/` in `oci.conf`.
    + `data_parser/v0.0.39` - Change `v0.0.39_job_info` response to tag
      `exit_code` field as being complex instead of only an unsigned integer.
- Updated to 23.02.3 with the following changes:
  * Bug Fixes:
    + `slurmctld` - Fix backup slurmctld crash when it takes control
      multiple times.
    + Fix regression in 23.02.2 that ignored the partition `DefCpuPerGPU`
      setting on the first pass of scheduling a job requesting
      `--gpus --ntasks`.
    + `srun` - fix issue creating regular and interactive steps because
       environment variables were incorrectly set on non-HetSteps.
    + Fix dynamic nodes getting stuck in allocated states when reconfiguring.
    + Fix regression in 23.02.2 that set the `SLURM_NTASKS` environment
      variable in sbatch jobs from `--ntasks-per-node` when `--ntasks` was not
      requested.
    + Fix regression in 23.02 that caused sbatch jobs to set the wrong number
      of tasks when requesting `--ntasks-per-node` without `--ntasks`, and also
      requesting one of the following options: `--sockets-per-node`,
      `--cores-per-socket`, `--threads-per-core` (or `--hint=nomultithread`),
      or `-B,--extra-node-info`.
    + Fix double counting suspended job counts on nodes when reconfiguring,
      which prevented nodes with suspended jobs from being powered down or
      rebooted once the jobs completed.
    + Fix backfill not scheduling jobs submitted with `--prefer` and
      `--constraint` properly.
    + mpi/pmix - fix regression introduced in 23.02.2 which caused PMIx shmem
      backed files permissions to be incorrect.
    + api/submit - fix memory leaks when submission of batch regular jobs
      or batch HetJobs fails (response data is a return code).
    + Fix regression in 23.02 leading to error() messages being sent at `INFO`
      instead of `ERR` in syslog.
    + Fix `TresUsageIn[Tot|Ave]` calculation for `gres/gpumem` and
      `gres/gpuutil`.
    + Fix issue in the gpu plugins where gpu frequencies would only be set if
      both gpu memory and gpu frequencies were set, while one or the other
      suffices.
    + Fix reservations group ACL's not working with the root group.
    + Fix updating a job with a ReqNodeList greater than the job's node count.
    + Fix inadvertent permission denied error for `--task-prolog` and
      `--task-epilog` with filesystems mounted with `root_squash`.
    + Fix missing detailed cpu and gres information in json/yaml output from
      `scontrol`, `squeue` and `sinfo`.
    + Fix regression in 23.02 that causes a failure to allocate job steps that
      request `--cpus-per-gpu` and gpus with types.
    + Fix potentially waiting indefinitely for a defunct process to finish,
      which affects various scripts including `Prolog` and `Epilog`. This could
      have various symptoms, such as jobs getting stuck in a completing state.
    + Fix losing list of reservations on job when updating job with list of
      reservations and restarting the controller.
    + Fix nodes resuming after down and drain state update requests from
      clients older than 23.02.
    + Fix advanced reservation creation/update when an association that should
      have access to it is composed with partition(s).
    + Fix job layout calculations with `--ntasks-per-gpu`, especially when
      `--nodes` has not been explicitly provided.
    + Fix X11 forwarding for jobs submitted from the slurmctld host.
    +  When a job requests `--no-kill` and one or more nodes fail during the
       job, fix subsequent job steps unable to use some of the remaining
       resources allocated to the job.
    + Fix shared gres allocation when using `--tres-per-task` with tasks that
      span multiple sockets.
    + `auth/jwt` - Fix memory leak.
  * Other changes:
    + `openapi/dbv0.0.39/users` - If a default account update failed, resulting
      in a no-op, the query returned success without any warning. Now a warning
      is sent back to the client that the default account wasn't modified.
    + Avoid job write lock when nodes are dynamically added/removed.
    + `burst_buffer/lua` - allow jobs to get scheduled sooner after
      `slurm_bb_data_in` completes.
    + `openapi/v0.0.39` - fix memory leak in `_job_post_het_submit()`.
    + Avoid possible `slurmctld` segfault caused by race condition with already
      completed `slurmdbd_conn` connections.
    + `Slurmdbd.conf` checks included conf files for 0600 permissions
    + `slurmrestd` - fix regression "oversubscribe" fields were removed from
      job descriptions and submissions from v0.0.39 end points.
    + `accounting_storage/mysql` - Query for indiviual QOS correctly when you
      have more than 10.
    + Add warning message about ignoring `--tres-per-tasks=license` when used
      on a step.
    + `sshare` - Fix command to work when using `priority/basic`.
    + Avoid loading `cli_filter` plugins outside of `salloc`/`sbatch`/`scron`/
      `srun`. This fixes a number of missing symbol problems that can manifest
      for executables linked against libslurm (and not `libslurmfull`).
    + Allow cloud_reg_addrs to update dynamically registered node's addrs on
      subsequent registrations.
    + Revert a change in 22.05.5 that prevented tasks from sharing a core if
      `--cpus-per-task` > threads per core, but caused incorrect accounting and
      cpu binding. Instead, `--ntasks-per-core=1` may be requested to prevent
      tasks from sharing a core.
    + Correctly send `assoc_mgr` lock to mcs plugin.
    + Avoid unnecessary `gres/gpumem` and `gres/gpuutil` `TRES` position
      lookups.
    + `sacct` - when printing `PLANNED` time, use end time instead of start
      time for jobs cancelled before they started.
    + Hold the job with `(Reservation ... invalid)` state reason if the
      reservation is not usable by the job.
    + `sbatch` - Added new `--export=NIL` option.
- Removed:
  * Fix-test-3.13.patch
  * Fix-test-38.11.patch as both tests changed upstream

-------------------------------------------------------------------
Tue Jul  4 19:21:37 UTC 2023 - Egbert Eich <eich@suse.com>

- Create a macro for upgrade dependency to ensure uniform handling.

-------------------------------------------------------------------
Tue May  9 09:28:23 UTC 2023 - Christian Goll <cgoll@suse.com>

- updated to 23.02.02 which includes a number of fixes to Slurm stability
  * Includes a fix for a regression in 23.02 that caused openmpi mpirun to fail
    to launch tasks.
  * It also includes two functional changes: Don't update the cron job tasks if
    the whole crontab file is left untouched after opening it with scrontab -e
  * Sort dynamic nodes and include them in topology after scontrol reconfigure
    or a slurmctld restart.

-------------------------------------------------------------------
Mon Apr 17 19:16:40 UTC 2023 - Egbert Eich <eich@suse.com>

- Web-configurator: changed presets to SUSE defaults.
- If %_restart_on_update is no longer defined replace by own
  macro.
- Marked slurm-openlava, slurm-seff and slurm-sjstat noarch.
- rpmlint:
  * dropped some rpmlint filters which are no longer relevant.
  * added/refreshed filters. For Details, see rpmlintrc.
- Remove workaround to fix the restart issue in an Slurm package
  described in bsc#1088693.
  The Slurm version in this package as 16.05. Any attempt to
  directly migrate to the current version is bound to fail
  anyway.
- Now require slurm-munge if munge authentication is installed.

-------------------------------------------------------------------
Fri Mar 31 07:37:01 UTC 2023 - Christian Goll <cgoll@suse.com>

- updated to 23.02.1 with the following changes:
  * job_container/tmpfs - cleanup job container even if namespace mount is
    already unmounted.
  * openapi/dbv0.0.38 - Fix not displaying an error when updating QOS or
    associations fails.
  * Fix nodes remaining as PLANNED after slurmctld save state recovery.
  * Add cgroup.conf EnableControllers option for cgroup/v2.
  * Get correct cgroup root to allow slurmd to run in containers like Docker.
  * slurmctld - add missing PrivateData=jobs check to step ContainerID lookup
    requests originated from 'scontrol show step container-id=<id>' or certain
    scrun operations when container state can't be directly queried.
  * Fix nodes un-draining after being drained due to unkillable step.
  * Fix remote licenses allowed percentages reset to 0 during upgrade.
  * sacct - Avoid truncating time strings when using SLURM_TIME_FORMAT with
    the --parsable option.
  * Fix regression in 22.05.0rc1 that broke Nodes=ALL in a NodeSet.
  * openapi/v0.0.39 - fix jobs submitted via slurmrestd being allocated fewer
    CPUs than tasks when requesting multiple tasks.
  * Fix job not being scheduled on valid nodes and potentially being rejected
    when using parentheses at the beginning of square brackets in a feature
    request, for example: "feat1&[(feat2|feat3)]".
  * Fix regression in 23.02.0rc1 which made --gres-flags=enforce-binding no
    longer enforce optimal core-gpu job placement.
  * mpi/pmix - Fix v5 to load correctly when libpmix.so isn't in the normal
    lib path.
  * data_parser/v0.0.39 - fix regression where "memory_per_node" would be
    rejected for job submission.
  * data_parser/v0.0.39 - fix regression where "memory_per_cpu" would be
    rejected for job submission.
  * slurmctld - add an assert to check for magic number presence before deleting
    a partition record and clear the magic afterwards to better diagnose
    potential memory problems.
  * Clean up OCI containers task directories correctly.
  * scrun - Run under existing job when SLURM_JOB_ID is present.
  * Prevent a slurmstepd crash when the I/O subsystem has hung.
  * common/conmgr - fix memory leak of complete connection list.
  * job_container/tmpfs - avoid printing extraneous error messages when running
    a spank plugin that implements slurm_spank_job_prolog() or
    slurm_spank_job_epilog().
  * Fix srun < 23.02 always getting an "exact" core allocation.
  * Prevent scontrol < 23.02 from setting MaxCPUsPerSocket to 0.
  * Add ScronParameters=explicit_scancel and corresponding scancel --cron
    option.
- removed right-pmix-path.patch as fixed upstream

-------------------------------------------------------------------
Thu Mar 16 15:48:15 UTC 2023 - Christian Goll <cgoll@suse.com>

- use libpmix.so.2 instead of libpmix.so to fix (bsc#1209260)
  this removes the need of pmix-pluginlib
  added: right-pmix-path.patch

-------------------------------------------------------------------
Wed Mar 15 10:19:12 UTC 2023 - Christian Goll <cgoll@suse.com>

- slurm-plugins need to require pmix-pluginlib (bsc#1209260)

-------------------------------------------------------------------
Tue Mar  7 15:18:05 UTC 2023 - Egbert Eich <eich@suse.com>

- Stop pulling firewall rules from github. There is no benefit to
  host these separately.
- Remove pre-sle12 pieces.

-------------------------------------------------------------------
Wed Mar  1 17:18:41 UTC 2023 - Egbert Eich <eich@suse.com>

- Add missing Provides:, Conflicts: and Obsoletes: to slurm-cray,
  slurm-hdf5 and slurm-testsuite to avoid package conflicts.
- Unify Obsoletes:.
- Consolidate spec files between different Slurm releases in
  Leap/SLE maintenance.
- Add dependency for the general plugin package to the
  AcctGatherProfile HDF5 plugin.
- Adjust node RealMemory in slurm.conf of test suite for 8G test
  nodes.

-------------------------------------------------------------------
Mon Feb 20 20:45:59 UTC 2023 - Egbert Eich <eich@suse.com>

- updated to 23.02.0
  * Highlights
    + slurmctld - Add new RPC rate limiting feature. This is enabled through
      SlurmctldParameters=rl_enable, otherwise disabled by default.
    + Make scontrol reconfigure and sending a SIGHUP to the slurmctld behave
      the same. If you were using SIGHUP as a 'lighter' scontrol reconfigure
      to rotate logs please update your scripts to use SIGUSR2 instead.
    + Change cloud nodes to show by default. PrivateData=cloud is no longer
      needed.
    + sreport - Count planned (FKA reserved) time for jobs running in
      IGNORE_JOBS reservations. Previously was lumped into IDLE time.
    + job_container/tmpfs - Support running with an arbitrary list of private
      mount points (/tmp and /dev/shm are the default, but not required).
    + job_container/tmpfs - Set more environment variables in InitScript.
    + Make all cgroup directories created by Slurm owned by root. This was the
      behavior in cgroup/v2 but not in cgroup/v1 where by default the step
      directories ownership were set to the user and group of the job.
    + accounting_storage/mysql - change purge/archive to calculate record ages
      based on end time, rather than start or submission times.
    + job_submit/lua - add support for log_user() from slurm_job_modify().
    + Run the following scripts in slurmscriptd instead of slurmctld:
      ResumeProgram, ResumeFailProgram, SuspendProgram, ResvProlog, ResvEpilog,
      and RebootProgram (only with SlurmctldParameters=reboot_from_controller).
    + Only permit changing log levels with 'srun --slurmd-debug' by root
      or SlurmUser.
    + slurmctld will fatal() when reconfiguring the job_submit plugin fails.
    + Add PowerDownOnIdle partition option to power down nodes after nodes
      become idle.
    + Add "[jobid.stepid]" prefix from slurmstepd and "slurmscriptd" prefix
      from slurmcriptd to Syslog logging. Previously was only happening when
      logging to a file.
    + Add purge and archive functionality for job environment and job batch
      script records.
    + Extend support for Include files to all "configless" client commands.
    + Make node weight usable for powered down and rebooting nodes.
    + Removed 'launch' plugin.
    + Add "Extra" field to job to store extra information other than a comment.
    + Add usage gathering for AMD (requires ROCM 5.5+) and NVIDIA gpus.
    + Add job's allocated nodes, features, oversubscribe, partition, and
      reservation to SLURM_RESUME_FILE output for power saving.
    + Automatically create directories for stdout/stderr output files. Paths
      may use %j and related substitution characters as well.
    + Add --tres-per-task to salloc/sbatch/srun.
    + Allow nodefeatures plugin features to work with cloud nodes.
      e.g. - Powered down nodes have no active changeable features.
      	   - Nodes can't be changed to other active features until powered down.
	   - Active changeable features are reset/cleared on power down.
    + Make slurmstepd cgroups constrained by total configured memory from
      slurm.conf (NodeName=<> RealMemory=#) instead of total physical memory.
    + node_features/helpers - add support for the OR and parentheses operators
      in a --constraint expression.
    + slurmctld will fatal() when [Prolog|Epilog]Slurmctld are defined but
      are not executable.
    + Validate node registered active features are a super set of node's
      currently active changeable features.
    + On clusters without any PrologFlags options, batch jobs with failed
      prologs no longer generate an output file.
    + Add SLURM_JOB_START_TIME and SLURM_JOB_END_TIME environment variables.
    + Add SuspendExcStates option to slurm.conf to avoid suspending/powering
      down specific node states.
    + Add support for DCMI power readings in IPMI plugin.
    + slurmrestd served /slurm/v0.0.39 and /slurmdb/v0.0.39 endpoints had major
      changes from prior versions. Almost all schemas have been renamed and
      modified. Sites using OpenAPI Generator clients are highly suggested to
      upgrade to to using atleast version 6.x due to limitations with prior
      versions.
    + Allow for --nodelist to contain more nodes than required by --nodes.
    + Rename "nodes" to "nodes_resume" in SLURM_RESUME_FILE job output.
    + Rename "all_nodes" to "all_nodes_resume" in SLURM_RESUME_FILE output.
    + Add jobcomp/kafka plugin.
    + Add new PreemptParameters=reclaim_licenses option which will allow higher
      priority jobs to preempt jobs to free up used licenses. (This is only
      enabled for with PreemptModes of CANCEL and REQUEUE, as Slurm cannot
      guarantee suspended jobs will release licenses correctly.)
    + hpe/slingshot - add support for the instant-on feature.
    + Add ability to update SuspendExc* parameters with scontrol.
    + Add ability to restore SuspendExc* parameters on restart with slurmctld
      -R option.
    + Add ability to clear a GRES specification by setting it to "0" via
    'scontrol update job'.
    + Add SLURM_JOB_OVERSUBSCRIBE environment variable for Epilog, Prolog,
      EpilogSlurmctld, PrologSlurmctld, and mail ouput.
    + System node down reasons are appended to existing reasons, separated
      by ':'.
    + New command scrun has been added. scrun acts as an Open Container
      Initiative (OCI) runtime proxy to run containers seamlessly via Slurm.
    + Fixed GpuFreqDef option. When set in slurm.conf, it will be used if
      --gpu-freq was not explicitly set by the job step.
  * Configuration Changes
    + job_container.conf - Added "Dirs" option to list desired private mount
      points.
    + node_features plugins - invalid users specified for AllowUserBoot will
      now result in fatal() rather than just an error.
    + Deprecate AllowedKmemSpace, ConstrainKmemSpace, MaxKmemPercent, and
      MinKmemSpace.
    + Allow jobs to queue even if the user is not in AllowGroups when
      EnforcePartLimits=no is set. This ensures consistency for all the
      Partition access controls, and matches the documented behavior for
      EnforcePartLimits.
    + Add InfluxDBTimeout parameter to acct_gather.conf.
    + job_container/tmpfs - add support for expanding %h and %n in BasePath.
    + slurm.conf - Removed SlurmctldPlugstack option.
    + Add new SlurmctldParameters=validate_nodeaddr_threads=<number> option to
      allow concurrent hostname resolution at slurmctld startup.
    + Add new AccountingStoreFlags=job_extra option to store a job's extra field
      in the database.
    + Add new "defer_batch" option to SchedulerParameters to only defer
      scheduling for batch jobs.
    + Add new DebugFlags option 'JobComp' to replace 'Elasticsearch'.
    + Add configurable job requeue limit parameter - MaxBatchRequeue - in
    slurm.conf to permit changes from the old hard-coded value of 5.
    + helpers.conf - Allow specification of node specific features.
    + helpers.conf - Allow many features to one helper script.
    + job_container/tmpfs - Add "Shared" option to support shared namespaces.
      This allows autofs to work with the job_container/tmpfs plugin when
      enabled.
    + acct_gather.conf - Added EnergyIPMIPowerSensors=Node=DCMI and
      Node=DCMI_ENHANCED.
    + Add new "getnameinfo_cache_timeout=<number>" option to
      CommunicationParameters to adjust or disable caching the results of
      getnameinfo().
    + Add new PrologFlags=ForceRequeueOnFail option to automatically requeue
      batch jobs on Prolog failures regardless of the job --requeue setting.
    + Add HealthCheckNodeState=NONDRAINED_IDLE option.
    + Add 'explicit' to Flags in gres.conf. This makes it so the gres is not
      automatically added to a job's allocation when --exclusive is used. Note
      that this is a per-node flag.
    + Moved the "preempt_" options from SchedulerParameters to
      PreemptParameters, and dropped the prefix from the option names.
      (The old options will still be parsed for backwards compatibility,
      but are now undocumented.)
    + Add LaunchParameters=ulimit_pam_adopt, which enables setting RLIMIT_RSS
      in adopted processes.
    + Update SwitchParameters=job_vni to enable/disable creating job VNIs
      for all jobs, or when a user requests them.
    + Update SwitchParameters=single_node_vni to enable/disable creating
      single node vnis for all jobs, or when a user requests them.
    + Add ability to preserve SuspendExc* parameters on reconfig with
      ReconfigFlags=KeepPowerSaveSettings.
    + slurmdbd.conf - Add new AllResourcesAbsolute to force all new resources
      to be created with the Absolute flag.
    + topology/tree - Add new TopologyParam=SwitchAsNodeRank option to reorder
      nodes based on switch layout. This can be useful if the naming convention
      for the nodes does not natually map to the network topology.
    + Removed the default setting for GpuFreqDef. If unset, no attempt to change
      the GPU frequency will be made if --gpu-freq is not set for the step.
  * Command Changes
    + sacctmgr - no longer force updates to the AdminComment, Comment, or
      SystemComment to lower-case.
    + sinfo - Add -F/--future option to sinfo to display future nodes.
    + sacct - Rename 'Reserved' field to 'Planned' to match sreport and the
      nomenclature of the 'Planned' node.
    + scontrol - advanced reservation flag MAINT will no longer replace nodes,
      similar to STATIC_ALLOC
    + sbatch - add parsing for #PBS -d and #PBS -w.
    + scontrol show assoc_mgr will show username(uid) instead of uid in
      QoS section.
    + Add strigger --draining and -R/--resume options.
    + Change --oversubscribe and --exclusive to be mutually exclusive for
      job submission. Job submission commands will now fatal if both are set.
      Previously, these options would override each other, with the last one
      in the job submission command taking effect.
    + scontrol - Requested TRES and allocated TRES will now always be printed
      when showing jobs, instead of one TRES output that was either the
      requested or allocated.
    + srun --ntasks-per-core now applies to job and step allocations. Now,
      use of --ntasks-per-core=1 implies --cpu-bind=cores and
      --ntasks-per-core>1 implies --cpu-bind=threads.
    + salloc/sbatch/srun - Check and abort if ntasks-per-core >
      threads-per-core.
    + scontrol - Add ResumeAfter=<secs> option to "scontrol update nodename=".
    + Add a new "nodes=" argument to scontrol setdebug to allow the debug
      level on the slurmd processes to be temporarily altered.
    + Add a new "nodes=" argument to "scontrol setdebugflags" as well.
    + Make it so scrontab prints client-side the job_submit() err_msg (which
      can be set i.e. by using the log_user() function for the lua plugin).
    + scontrol - Reservations will not be allowed to have STATIC_ALLOC or
      MAINT flags and REPLACE[_DOWN] flags simultaneously.
    + scontrol - Reservations will only accept one reoccurring flag when
      being created or updated.
    + scontrol - A reservation cannot be updated to be reoccurring if it is
      already a floating reservation.
    + squeue - removed unused '%s' and 'SelectJobInfo' formats.
    + squeue - align print format for exit and derived codes with that of
      other components (<exit_status>:<signal_number>).
    + sacct - Add --array option to expand job arrays and display array
      tasks on separate lines.
    + Partial support for '--json' and '--yaml' formated outputs have been
      implemented for sacctmgr, sdiag, sinfo, squeue, and scontrol. The
      resultant data ouput will be filtered by normal command arguments.
      Formatting arguments will continue to be ignored.
    + salloc/sbatch/srun - extended the --nodes syntax to allow for a list
      of valid node counts to be allocated to the job. This also supports
      a "step count" value (e.g., --nodes=20-100:20 is equivalent to
      --nodes=20,40,60,80,100) which can simplify the syntax when the job
      needs to scale by a certain "chunk" size.
    + srun - add user requestible vnis with '--network=job_vni' option.
    + srun - add user requestible single node vnis with the
      '--network=single_node_vni' option.
  * API Changes
    + job_container plugins - container_p_stepd_create() function signature
      replaced uint32_t uid with stepd_step_rec_t* step.
    + gres plugins - gres_g_get_devices() function signature replaced pid_t
      pid with stepd_step_rec_t* step.
    + cgroup plugins - task_cgroup_devices_constrain() function signature
      removed pid_t pid.
    + task plugins - replace task_p_pre_set_affinity(), task_p_set_affinity(),
      and task_p_post_set_affinity() with task_p_pre_launch_priv() like it
      was back in slurm 20.11.
    + Allow for concurrent processing of job_submit_g_submit() and
      job_submit_g_modify() calls. If your plugin is not capable of concurrent
      operation you must add additional locking within your plugin.
    + Removed return value from slurm_list_append().
    + The List and ListIterator types have been removed in favor of list_t
      and list_itr_t respectively.
    + burst buffer plugins - add bb_g_build_het_job_script().
      bb_g_get_status() - added authenticated UID and GID.
      bb_g_run_script() - added job_info argument.
    + burst_buffer.lua - Pass UID and GID to most hooks. Pass job_info
      (detailed job information) to many hooks. See
      etc/burst_buffer.lua.example for a complete list of changes.
      WARNING: Backwards compatibility is broken for
      slurm_bb_get_status: UID and GID are passed before the variadic
      arguments. If UID and GID are not explicitly listed as arguments to
      slurm_bb_get_status(), then they will be included in the variadic
      arguments.
      Backwards compatibility is maintained for all other hooks because
      the new arguments are passed after the existing arguments.
    + node_features plugins - node_features_p_reboot_weight() function
      removed.
      node_features_p_job_valid() - added parameter feature_list.
      node_features_p_job_xlate() - added parameters feature_list and
      job_node_bitmap.
    + New data_parser interface with v0.0.39 plugin.
* Added:    Fix-test-1.99.patch
* Reworked: Fix-test-38.11.patch
            pam_slurm-Initialize-arrays-and-pass-sizes.patch

-------------------------------------------------------------------
Thu Feb  9 07:54:01 UTC 2023 - Egbert Eich <eich@suse.com>

- testsuite: on later SUSE versions claim ownership of directory
  /etc/security/limits.d.

-------------------------------------------------------------------
Fri Dec  2 16:39:45 UTC 2022 - Egbert Eich <eich@suse.com>

- Move the ext_sensors/rrd plugin to a separate package: this
  plugin requires librrd which in turn requires huge parts of
  the client side X Window System stack.
  There is probably no use in cluttering up a system for a
  plugin that probably only used by a few.

-------------------------------------------------------------------
Fri Oct 21 15:14:30 UTC 2022 - Egbert Eich <eich@suse.com>

- Test Suite fixes:
  * Update README_Testsuite.md.
  * Clean up left over files when de-installing test suite.
  * Adjustment to test suite package: for SLE mark the openmpi4
    devel package and slurm-hdf5 optional.
  * Add -ffat-lto-objects to the build flags when LTO is set to
    make sure the object files we ship with the test suite still
    work correctly (boo#1204697).
  * Improve setup-testsuite.sh: copy ssh fingerprints from all nodes.

-------------------------------------------------------------------
Fri Oct 14 08:49:24 UTC 2022 - Christian Goll <cgoll@suse.com>

- updated to 22.05.5
- NOTE: Slurm validates that libraries are of the same version. Unfortunately,
  due to an oversight, we failed to notice that the slurmstepd loads the
  hash_k12 library only after a job has completed. This means that if the
  hash_k12 library is upgraded before a job finishes, the slurmstepd will load
  the new library when the job finishes, and will fail due to a mismatch of
  versions.  This results in nodes with slurmstepd processes stuck
  indefinitely. These processes require manual intervention to clean up. There
  is no clean way to resolve these hung slurmstepd processes.
  The only recommended way to upgrade between minor versions of 22.05 with
  RPM’s or upgrades that replace current binaries and libraries is to drain the
  nodes of running jobs first.
- Fixes a number of moderate severity issues, noteable are:
  * Load hash plugin at slurmstepd launch time to prevent issues loading the
    plugin at step completion if the Slurm installation is upgraded.
  * Update nvml plugin to match the unique id format for MIG devices in new
    Nvidia drivers.
  * Fix multi-node step launch failure when nodes in the controller aren't in
    natural order. This can happen with inconsistent node naming (such as
    node15 and node052) or with dynamic nodes which can register in any order.
  * job_container/tmpfs - cleanup containers even when the .ns file isn't
    mounted anymore.
  * Wait up to PrologEpilogTimeout before shutting down slurmd to allow prolog
    and epilog scripts to complete or timeout. Previously, slurmd waited 120
    seconds before timing out and killing prolog and epilog scripts.

-------------------------------------------------------------------
Sat Sep 24 07:34:31 UTC 2022 - Egbert Eich <eich@suse.com>

- Do not deduplicate files of testsuite Slurm configuration.
  This directory is supposed to be mounted over /etc/slurm
  therefore it must not contain softlinks to the files in
  this directory.
- Improve .a and .o file collection for test suite: find these
  files even if there are multiple ones in a single line.

-------------------------------------------------------------------
Tue Sep 20 21:12:19 UTC 2022 - Egbert Eich <eich@suse.com>

- Fix build for older product version.

-------------------------------------------------------------------
Tue Aug  2 12:43:39 UTC 2022 - Egbert Eich <eich@suse.com>

- Fix a potential security vulnerability in the test package
  (bsc#1201674, CVE-2022-31251).

-------------------------------------------------------------------
Thu Jul 21 19:20:42 UTC 2022 - Bernhard Wiedemann <bwiedemann@suse.com>

- make slurmtest.tar reproducible

-------------------------------------------------------------------
Thu Jul 14 15:20:46 UTC 2022 - Egbert Eich <eich@suse.com>

- Improve check for mpicc in testsuite package: if binary isn't
  found, don't crash.
- Patch NOFILE Limit in the slurmd.service copy for the testsuite.

-------------------------------------------------------------------
Mon Jun 20 09:23:17 UTC 2022 - Christian Goll <cgoll@suse.com>

- update to 22.05.2 with following fixes:
  * Fix regression which allowed the oversubscription of licenses.
  * Fix a segfault in slurmctld when requesting gres in job arrays.

-------------------------------------------------------------------
Wed Jun  8 13:15:24 UTC 2022 - Egbert Eich <eich@suse.com>

- Package the Slurm testsuite for QA purposes.
  NOTE: This package is not meant to be used for testing by the
  user but rather for testing by the maintainers to ensure the
  package is working properly.
  DO NOT report test suite failures unless you are able to confirm
  that the failure is really a bug.
  * Fixes for test suite:
    Keep-logs-of-skipped-test-when-running-test-cases-sequentially.patch
    Fix-test-21.41.patch
    Fix-test-38.11.patch
    Fix-test-32.8.patch
    Fix-test-3.13.patch
    Fix-test7.2-to-find-libpmix-under-lib64-as-well.patch
  * Add documentation:
    README_Testsuite.md
- Allow log in as user 'slurm'. This allows admins to run certain
  priviledged commands more easily without becoming root.

-------------------------------------------------------------------
Tue May 31 12:56:05 UTC 2022 - Christian Goll <cgoll@suse.com>

- update to 22.05.0 with following changes:
- Support for dynamic node addition and removal
- Support for native Linux cgroup v2 operation
- Newly added plugins to support HPE Slingshot 11 networks
  (switch/hpe_slingshot), and Intel Xe GPUs (gpu/oneapi)
- Added new acct_gather_interconnect/sysfs plugin to collect statistics
  from arbitrary network interfaces.
- Expanded and synced set of environment variables available in the
  Prolog/Epilog/PrologSlurmctld/EpilogSlurmctld scripts.
- New "--prefer" option to job submissions to allow for a "soft
  constraint" request to influence node selection.
- Optional support for license planning in the backfill scheduler with
  "bf_licenses" option in SchedulerParameters.
- removed file slurm-2.4.4-init.patch as sysvinit is now realy deprecated
- removed file load-pmix-major-version.patch as fixed upstream
- set environment variable SUSE_ZNOW to 0 in %build to avoid module load
  failures due to unresolved symbols as module take advantage of lazy
  bindings (bsc#1200030).

-------------------------------------------------------------------
Tue May 10 10:26:02 UTC 2022 - Egbert Eich <eich@suse.com>

- Add a comment about the CommunicationParameters=block_null_hash
  option warning users who migrate - just in case.

-------------------------------------------------------------------
Fri May  6 09:33:34 UTC 2022 - Christian Goll <cgoll@suse.com>

- Update to 21.08.8 which fixes CVE-2022-29500 (bsc#1199278),
  CVE-2022-29501 (bsc#1199279), and CVE-2022-29502 (bsc#1199281).
- Added 'CommunicationParameters=block_null_hash' to slurm.conf, please
  add this parameter to existing configurations.

-------------------------------------------------------------------
Mon May  2 14:12:59 UTC 2022 - Christian Goll <cgoll@suse.com>
 - Update to 21.08.7 with following changes:
  * openapi/v0.0.37 - correct calculation for bf_queue_len_mean in /diag.
  * Avoid shrinking a reservation when overlapping with downed nodes.
  * Only check TRES limits against current usage for TRES requested by the job.
  * Do not allocate shared gres (MPS) in whole-node allocations
  * Constrain slurmstepd to job/step cgroup like in previous versions of Slurm.
  * Fix warnings on 32-bit compilers related to printf() formats.
  * Fix reconfigure issues after disabling/reenabling the GANG PreemptMode.
  * Fix race condition where a cgroup was being deleted while another step
    was creating it.
  * Set the slurmd port correctly if multi-slurmd
  * Fix FAIL mail not being sent if a job was cancelled due to preemption.
  * slurmrestd - move debug logs for HTTP handling to be gated by debugflag
    NETWORK to avoid unnecessary logging of communication contents.
  * Fix issue with bad memory access when shrinking running steps.
  * Fix various issues with internal job accounting with GRES when jobs are
    shrunk.
  * Fix ipmi polling on slurmd reconfig or restart.
  * Fix srun crash when reserved ports are being used and het step fails
    to launch.
  * openapi/dbv0.0.37 - fix DELETE execution path on /user/{user_name}.
  * slurmctld - Properly requeue all components of a het job if PrologSlurmctld
    fails.
  * rlimits - remove final calls to limit nofiles to 4096 but to instead use
    the max possible nofiles in slurmd and slurmdbd.
  * Allow the DBD agent to load large messages (up to MAX_BUF_SIZE) from state.
  * Fix potential deadlock during slurmctld restart when there is a completing
    job.
  * slurmstepd - reduce user requested soft rlimits when they are above max
    hard rlimits to avoid rlimit request being completely ignored and
    processes using default limits.
  * Fix Slurm user commands displaying available features as active features
    when no features were active.
  * Don't power down nodes that are rebooting.
  * Clear pending node reboot on power down request.
  * Ignore node registrations while node is powering down.
  * Don't reboot any node that is power<ing|ed> down.
  * Don't allow a node to reboot if it's marked for power down.
  * Fix issuing reboot and downing when rebooting a powering up node.
  * Clear DRAIN on node after failing to resume before ResumeTimeout.
  * Prevent repeating power down if node fails to resume before ResumeTimeout.
  * Fix federated cloud node communication with srun and cloud_dns.
  * Fix jobs being scheduled on nodes marked to be powered_down when idle.
  * Fix problem where a privileged user could not view array tasks specified by
    <array_job_id>_<task_id> when PrivateData had the jobs value set.
 - Changes in Slurm 21.08.6
  * Fix plugin_name definitions in a number of plugins to improve logging.
  * Close sbcast file transfers when job is cancelled.
  * scrontab - fix handling of --gpus and --ntasks-per-gpu options.
  * sched/backfill - fix job_queue_rec_t memory leak.
  * Fix magnetic reservation logic in both main and backfill schedulers.
  * job_container/tmpfs - fix memory leak when using InitScript.
  * slurmrestd / openapi - fix memory leaks.
  * Fix slurmctld segfault due to job array resv_list double free.
  * Fix multi-reservation job testing logic.
  * Fix slurmctld segfault due to insufficient job reservation parse validation.
  * Fix main and backfill schedulers handling for already rejected job array.
  * sched/backfill - restore resv_ptr after yielding locks.
  * acct_gather_energy/xcc - appropriately close and destroy the IPMI context.
  * Protect slurmstepd from making multiple calls to the cleanup logic.
  * Prevent slurmstepd segfault at cleanup time in mpi_fini().
  * Fix slurmctld sometimes hanging if shutdown while PrologSlurmctld or
    EpilogSlurmctld were running and PrologEpilogTimeout is set in slurm.conf.
  * Fix affinity of the batch step if batch host is different than the first
    node in the allocation.
  * slurmdbd - fix segfault after multiple failover/failback operations.
  * Fix jobcomp filetxt job selection condition.
  * Fix -f flag of sacct not being used.
  * Select cores for job steps according to the socket distribution. Previously,
    sockets were always filled before selecting cores from the next socket.
  * Keep node in Future state if epilog completes while in Future state.
  * Fix erroneous --constraint behavior by preventing multiple sets of brackets.
  * Make ResetAccrueTime update the job's accrue_time to now.
  * Fix sattach initialization with configless mode.
  * Revert packing limit checks affecting pmi2.
  * sacct - fixed assertion failure when using -c option and a federation
    display
  * Fix issue that allowed steps to overallocate the job's memory.
  * Fix the sanity check mode of AutoDetect so that it actually works.
  * Fix deallocated nodes that didn't actually launch a job from waiting for
    Epilogslurmctld to complete before clearing completing node's state.
  * Job should be in a completing state if EpilogSlurmctld when being requeued.
  * Fix job not being requeued properly if all node epilog's completed before
    EpilogSlurmctld finished.
  * Keep job completing until EpilogSlurmctld is completed even when "downing"
    a node.
  * Fix handling reboot with multiple job features.
  * Fix nodes getting powered down when creating new partitions.
  * Fix bad bit_realloc which potentially could lead to bad memory access.
  * slurmctld - remove limit on the number of open files.
  * Fix bug where job_state file of size above 2GB wasn't saved without any
    error message.
  * Fix various issues with no_consume gres.
  * Fix regression in 21.08.0rc1 where job steps failed to launch on systems
    that reserved a CPU in a cgroup outside of Slurm (for example, on systems
    with WekaIO).
  * Fix OverTimeLimit not being reset on scontrol reconfigure when it is
    removed from slurm.conf.
  * serializer/yaml - use dynamic buffer to allow creation of YAML outputs
    larger than 1MiB.
  * Fix minor memory leak affecting openapi users at process termination.
  * Fix batch jobs not resolving the username when nss_slurm is enabled.
  * slurmrestd - Avoid slurmrestd ignoring invalid HTTP method if the response
    serialized without error.
  * openapi/dbv0.0.37 - Correct conditional that caused the diag output to
    give an internal server error status on success.
  * Make --mem-bind=sort work with task_affinity
  * Fix sacctmgr to set MaxJobsAccruePer{User|Account} and MinPrioThres in
    sacctmgr add qos, modify already worked correctly.
  * job_container/tmpfs - avoid printing extraneous error messages in Prolog
    and Epilog, and when the job completes.
  * Fix step CPU memory allocation with --threads-per-core without --exact.
  * Remove implicit --exact when --threads-per-core or --hint=nomultithread
    is used.
  * Do not allow a step to request more threads per core than the
    allocation did.
  * Remove implicit --exact when --cpus-per-task is used.

-------------------------------------------------------------------
Wed Dec 22 09:24:28 UTC 2021 - Christian Goll <cgoll@suse.com>

- update to 21.08.5 with following changes:
  * Fix issue where typeless GRES node updates were not immediately reflected.
  * Fix setting the default scrontab job working directory so that it's the home
    of the different user (*u <user>) and not that of root or SlurmUser editor.
  * Fix stepd not respecting SlurmdSyslogDebug.
  * Fix concurrency issue with squeue.
  * Fix job start time not being reset after launch when job is packed onto
    already booting node.
  * Fix updating SLURM_NODE_ALIASES for jobs packed onto powering up nodes.
  * Cray - Fix issues with starting hetjobs.
  * auth/jwks - Print fatal() message when jwks is configured but file could
    not be opened.
  * If sacctmgr has an association with an unknown qos as the default qos
    print 'UNKN*###' instead of leaving a blank name.
  * Correctly determine task count when giving --cpus-per-gpu, --gpus and
    *-ntasks-per-node without task count.
  * slurmctld - Fix places where the global last_job_update was not being set
    to the time of update when a job's reason and description were updated.
  * slurmctld - Fix case where a job submitted with more than one partition
    would not have its reason updated while waiting to start.
  * Fix memory leak in node feature rebooting.
  * Fix time limit permanetly set to 1 minute by backfill for job array tasks
    higher than the first with QOS NoReserve flag and PreemptMode configured.
  * Fix sacct -N to show jobs that started in the current second
  * Fix issue on running steps where both SLURM_NTASKS_PER_TRES and
    SLURM_NTASKS_PER_GPU are set.
  * Handle oversubscription request correctly when also requesting
    *-ntasks-per-tres.
  * Correctly detect when a step requests bad gres inside an allocation.
  * slurmstepd - Correct possible deadlock when UnkillableStepTimeout triggers.
  * srun - use maximum number of open files while handling job I/O.
  * Fix writing to Xauthority files on root_squash NFS exports, which was
    preventing X11 forwarding from completing setup.
  * Fix regression in 21.08.0rc1 that broke --gres=none.
  * Fix srun --cpus-per-task and --threads-per-core not implicitly setting
    *-exact. It was meant to work this way in 21.08.
  * Fix regression in 21.08.0 that broke dynamic future nodes.
  * Fix dynamic future nodes remembering active state on restart.
  * Fix powered down nodes getting stuck in COMPLETING+POWERED_DOWN when job is
    cancelled before nodes are powering up.

-------------------------------------------------------------------
Wed Nov 17 08:33:13 UTC 2021 - Christian Goll <cgoll@suse.com>

- updated to 21.08.4 which fixes (CVE-2021-43337) which is only present
  in 21.08 tree.
  * CVE-2021-43337:
    For sites using the new AccountingStoreFlags=job_script and/or job_env
    options, an issue was reported with the access control rules in SlurmDBD
    that will permit users to request job scripts and environment files that
    they should not have access to. (Scripts/environments are meant to only be
    accessible by user accounts with administrator privileges, by account
    coordinators for jobs submitted under their account, and by the user
    themselves.)
- changes from 21.08.3:
  * This includes a number of fixes since the last release a month ago,
    including one critical fix to prevent a communication issue between
    slurmctld and slurmdbd for sites that have started using the new
    AccountingStoreFlags=job_script functionality.

-------------------------------------------------------------------
Fri Oct 29 15:54:53 UTC 2021 - Egbert Eich <eich@suse.com>

- Utilize sysuser infrastructure to set user/group slurm.
  For munge authentication slurm should have a fixed UID across
  all nodes including the management server. Set it to 120
- Limit firewalld service definitions to SUSE versions >= 15.

-------------------------------------------------------------------
Mon Oct 18 13:36:14 UTC 2021 - Christian Goll <cgoll@suse.com>

- added service definitions for firewalld (JSC#SLE-22741)

-------------------------------------------------------------------
Wed Oct  6 07:12:52 UTC 2021 - Christian Goll <cgoll@suse.com>

- update to 21.08.2 
- major change:
  * removed of support of the TaskAffinity=yes option in cgroup.conf. Please
    consider using "TaskPlugins=cgroup,affinity" in slurm.conf as an option.
- minor changes and bugfixes:
  * slurmctld - fix how the max number of cores on a node in a partition are
    calculated when the partition contains multi*socket nodes. This in turn
    corrects certain jobs node count estimations displayed client*side.
  * job_submit/cray_aries - fix "craynetwork" GRES specification after changes
    introduced in 21.08.0rc1 that made TRES always have a type prefix.
  * Ignore nonsensical check in the slurmd for [Pro|Epi]logSlurmctld.
  * Fix writing to stderr/syslog when systemd runs slurmctld in the foreground.
  * Fix issue with updating job started with node range.
  * Fix issue with nodes not clearing state in the database when the slurmctld
    is started with clean*start.
  * Fix hetjob components > 1 timing out due to InactiveLimit.
  * Fix sprio printing -nan for normalized association priority if
    PriorityWeightAssoc was not defined.
  * Disallow FirstJobId=0.
  * Preserve job start info in the database for a requeued job that hadn't
    registered the first time in the database yet.
  * Only send one message on prolog failure from the slurmd.
  * Remove support for TaskAffinity=yes in cgroup.conf.
  * accounting_storage/mysql - fix issue where querying jobs via sacct
    *-whole-hetjob=yes or slurmrestd (which automatically includes this flag)
    could in some cases return more records than expected.
  * Fix issue for preemption of job array task that makes afterok dependency
    fail. Additionally, send emails when requeueing happens due to preemption.
  * Fix sending requeue mail type.
  * Properly resize a job's GRES bitmaps and counts when resizing the job.
  * Fix node being able to transition to CLOUD state from non-cloud state.
  * Fix regression introduced in 21.08.0rc1 which broke a step's ability to
    inherit GRES from the job when the step didn't request GRES but the job did.
  * Fix errors in logic when picking nodes based on bracketed anded constraints.
    This also enforces the requirement to have a count when using such
    constraints.
  * Handle job resize better in the database.
  * Exclude currently running, resized jobs from the runaway jobs list.
  * Make it possible to shrink a job more than once.

-------------------------------------------------------------------
Tue Sep 28 15:53:38 UTC 2021 - Christian Goll <cgoll@suse.com>

- moved pam module from /lib64 to /usr/lib64 which fixes boo#1191095 
  via the macro %_pam_moduledir

-------------------------------------------------------------------
Fri Sep 17 07:22:44 UTC 2021 - Christian Goll <cgoll@suse.com>

- updated to 21.08.1 with following bug fixes:
  * Fix potential memory leak if a problem happens while allocating GRES for
    a job.
  * If an overallocation of GRES happens terminate the creation of a job.
  * AutoDetect=nvml: Fatal if no devices found in MIG mode.
  * Print federation and cluster sacctmgr error messages to stderr.
  * Fix off by one error in --gpu-bind=mask_gpu.
  * Add --gpu-bind=none to disable gpu binding when using --gpus-per-task.
  * Handle the burst buffer state "alloc-revoke" which previously would not
    display in the job correctly.
  * Fix issue in the slurmstepd SPANK prolog/epilog handler where configuration
    values were used before being initialized.
  * Restore a step's ability to utilize all of an allocations memory if --mem=0.
  * Fix --cpu-bind=verbose garbage taskid.
  * Fix cgroup task affinity issues from garbage taskid info.
  * Make gres_job_state_validate() client logging behavior as before 44466a4641.
  * Fix steps with --hint overriding an allocation with --threads-per-core.
  * Require requesting a GPU if --mem-per-gpu is requested.
  * Return error early if a job is requesting --ntasks-per-gpu and no gpus or
    task count.
  * Properly clear out pending step if unavailable to run with available
    resources.
  * Kill all processes spawned by burst_buffer.lua including decendents.
  * openapi/v0.0.{35,36,37} - Avoid setting default values of min_cpus,
    job name, cwd, mail_type, and contiguous on job update.
  * openapi/v0.0.{35,36,37} - Clear user hold on job update if hold=false.
  * Prevent CRON_JOB flag from being cleared when loading job state.
  * sacctmgr - Fix deleting WCKeys when not specifying a cluster.
  * Fix getting memory for a step when the first node in the step isn't the
    first node in the allocation.
  * Make SelectTypeParameters=CR_Core_Memory default for cons_tres and cons_res.
  * Correctly handle mutex unlocks in the gres code if failures happen.
  * Give better error message if -m plane is given with no size.
  * Fix --distribution=arbitrary for salloc.
  * Fix jobcomp/script regression introduced in 21.08.0rc1 0c75b9ac9d.
  * Only send the batch node in the step_hostlist in the job credential.
  * When setting affinity for the batch step don't assume the batch host is node
    0.
  * In task/affinity better checking for node existence when laying out
    affinity.
  * slurmrestd - fix job submission with auth/jwt.

- removed Fix-statement-condition-in-netloc-autoconf-macro.patch 
  issue was fixed upstream

-------------------------------------------------------------------
Mon Sep  6 15:34:06 UTC 2021 - Egbert Eich <eich@suse.com>

- Fix-statement-condition-in-netloc-autoconf-macro.patch:
  Fix netloc check, reestablish netloc disable code.
- Make configure arg '--with-pmix' conditional.
- Move openapi plugins to package slurm-restd.

-------------------------------------------------------------------
Thu Sep  2 13:19:33 UTC 2021 - Christian Goll <cgoll@suse.com>

- updated to 21.08.0, major changes:
  * A new "AccountingStoreFlags=job_script" option to store the job scripts
    directly in SlurmDBD.
  * Added "sacct -o SubmitLine" format option to get the submit line 
    of a job/step.
  * Changes to the node state management so that nodes are marked as PLANNED
    instead of IDLE if the scheduler is still accumulating resources while
    waiting to launch a job on them.
  * RS256 token support in auth/jwt.
  * Overhaul of the cgroup subsystems to simplify operation, mitigate a number
    of inherent race conditions, and prepare for future cgroup v2 support.
  * Further improvements to cloud node power state management.
  * A new child process of the Slurm controller called "slurmscriptd"
    responsible for executing PrologSlurmctld and EpilogSlurmctld scripts,
    which significantly reduces performance issues associated with enabling
    those options.
  * A new burst_buffer/lua plugin allowing for site-specific asynchronous job
    data management.
  * Fixes to the job_container/tmpfs plugin to allow the slurmd process to be
    restarted while the job is running without issue.
  * Added json/yaml output to sacct, squeue, and sinfo commands.
  * Added a new node_features/helpers plugin to provide a generic way to change
    settings on a compute node across a reboot.
  * Added support for automatically detecting and broadcasting shared libraries
    for an executable launched with "srun --bcast".
  * Added initial OCI container execution support with a new --container option
    to sbatch and srun.
  * Improved "configless" support by allowing multiple control servers to be
    specified through the slurmd --conf-server option, and send additional
    configuration files at startup including cli_filter.lua.
- minor changes:
  * If an overallocation of GRES happens terminate the creation of a job.
  * AutoDetect=nvml: Fatal if no devices found in MIG mode.
  * Print federation and cluster sacctmgr error messages to stderr.
  * Add --gpu-bind=none to disable gpu binding when using --gpus-per-task.
  * Handle the burst buffer state "alloc-revoke" which previously would not
    display in the job correctly.
  * Fix issue in the slurmstepd SPANK prolog/epilog handler where configuration
    values were used before being initialized.
  * Restored --gpu-bind=single:<ntasks> to check core affinity like
    *-gpu-bind=closest does. This removal of this behavior only was in rc2.
  * slurmd - Fix assert failure on initialization due to bad node name.
  * Fix error codes in cgroup/v1.
  * Don't destroy the memory step outside fini, which leads to a double destroy
    causing an error message.
  * Add support for lua 5.4.
  * Force cgroup.clone_children to 0 in slurm cgroup directories. This caused
    issues in task cpuset plugin in systems with it enabled by default.
  * Clear GRES HAS_TYPE flag when removing type name.
  * Environment flags in gres.conf now override flags set by AutoDetect.
  * Environment flags in gres.conf now apply to subsequent gres.conf lines where
    Environment flags are not set.
  * Set missing job_uid and job_gid members when preparing a kill_job_msg_t in
    abort_job_on_node(), abort_job_on_nodes() and kill_job_on_node().
  * Fix swappiness not being set in cgroups.
  * Fix coordinators for new subaccounts.
  * Fix coordinators when adding existing users with PrivateData=users.
  * slurmctld - do not attempt to relinquish control to self.
  * openapi/v0.0.37 - Honor kill_on_invalid_dependency as job parameter.
  * Check max_gres when doing step allocation, fix for regression in rc2.
  * SPANK plugins are now required to match the current Slurm version, and must
    be recompiled for each new Slurm release.
  * node_features/helpers - add ExecTime configuration option.
  * srun - Fix force termination with -X.
  * On slurmctld restart set node typed GRES counts correctly.
  * Fix places where a step wasn't allocated in the slurmctld but wasn't ever
    removed from the job.
  * Fix step allocation memory when using --threads-per-core.
  * Fix step allocations to consume all threads on a core when using
    threads-per-core.
  * Add check to validate cpu request on a step if --threads-per-core is given
    and it is less than what the core on the node has in the allocation.
  * Fix issue where a step could request more gres than the job had and the step
    would hang forever. This bug was only introduced in 21.08.0rc2.
  * Only print \r\n for logging messages on stderr when --pty has been
    explicitly requested.
  * Relax check on SPANK plugins to only require Slurm major + minor versions
    to match.
  * job_container/tmpfs - delegate handling of /dev/shm to the extern step
    so new step launches will be attached correctly even after the slurmd
    process has been restarted.
  * Limit the wait time in proctrack_g_wait() to UnkillableStepTimeout instead
    of a hardcoded value of 256 seconds, and limit the delay between tests to a
    maximum of 32 seconds.
  * fatal() on start if using job_container/tmpfs without PrologFlags=Contian.
  * Load bf_when_last_cycle from job state only if protocol version >= 21.08.
  * Docs - remove man3 section entirely.
  * Set step memory when using MemPerGPU or DefMemPerGPU. Previously a step's
    memory was not set even when it requested *-mem-per-gpu and at least one
    GPU.
  * Add cli_filter.lua support in configless mode.
  * Check that the step requests at least as many gres as nodes.
  * Make job's SLURM_JOB_GPUS print global GPU IDs instead of MIG unique_ids.
  * Fix miscounting of GPU envs in prolog/epilog if MultipleFiles was used.
  * Support MIGs in prolog/epilog's CUDA_VISIBLE_DEVICES & co.
  * Add SLURM_JOB_GPUS back into Prolog; add it to Epilog.
  * Fix issue where the original executable, not the bcast'd version, was
    executed with 'srun *-bcast'.
  * sacct - print '-' header correctly for fields over 53-characters wide.
  * openapi/dbv0.0.37 - replace "REST" with "Slurm OpenAPI" for plugin_name.
  * openapi/v0.0.37 - replace "REST" with "Slurm OpenAPI" for plugin_name.
  * configless - fix segfault on 'scontrol reconfigure'.
  * Use FREE_NULL_LIST instead of list_destroy.
  * If we made are running an interactive session we need to force track_steps.
  * Disable OPOST flag when using --pty to avoid issues with Emac.
  * Fix issue where extra bonus core was allocated in some situations.
  * Avoid putting gres with count of 0 on a TRES req/alloc.
  * Fix memory in requested TRES when --mem-per-gpu is used.
  * Changed ReqMem field in sacct to match memory from ReqTRES.
  * Changed --gpu-bind=single:<ntasks> to no longer check core affinity like
    *-gpu-bind=closest does. This consequently affects --ntasks-per-gpu.
  * slurmrestd - add v0.0.37 OpenAPI plugin.
  * slurmrestd/v0.0.37 - rename standard_in -> standard_input.
  * slurmrestd/v0.0.37 - rename standard_out -> standard_output.
  * Changed the --format handling for negative field widths (left justified)
    to apply to the column headers as well as the printed fields.
  * Add LimitFactor to the QOS. A float that is factored into an associations
    [Grp|Max]TRES limits.  For example, if the LimitFactor is 2, then an
    association with a GrpTRES of 30 CPUs, would be allowed to allocate 60
    CPUs when running under this QOS.
  * slurmrestd - Pass SLURM_NO_CHANGE_IN_DATA to client as 403 (Not Modified).
  * slurmrestd/v0.0.37 - Add update_time field to Jobs query to allow clients
    to only get jobs list based on change timestamp.
  * Reset job eligible time when job is manually held.
  * Add DEBUG_FLAG_JAG to improve logging related to job account gathering.
  * Convert logging in account_gather/common to DEBUG_FLAG_JAG.
  * Add more logging for jag_common_poll_data() when prec_extra() called.
  * slurmrestd/v0.0.37 - add API to fetch reservation(s) info.
  * Catch more errors in task/cgroup initalization and cleanup to avoid allowing
    jobs to start when cgroups failure to configure correctly.
  * Fix cgroup ns detection when using containers (e.g. LXC or Docker).
  * Reset job's next_step_id counter to 0 after being requeued.
  * Make scontrol exit with non-zero status after failing to delete a partition
    or reservation.
  * Make NtasksPerTRES optional in slurm_sprint_job_info().
  * slurmrestd/v0.0.37 - Add update_time field to nodes query to allow clients
    to only get nodes list based on change timestamp.
  * common/parse_config - catch and propagate return codes when handling a match
    on a key-value pattern. This implies error codes detected in the handlers
    are now not ignored and users of _handle_keyvalue_match() can fatal().
  * common/hostlist - fix hostlist_delete_nth() xassert() upper bound check.
  * API change: Removed slurm_kill_job_msg and modified the function signature
    for slurm_kill_job2. slurm_kill_job2 should be used instead of
    slurm_kill_job_msg.
  * Fix non-zero exit code for scontrol ping when all controllers are down.
  * Enforce a valid configuration for AccountingStorageEnforce in slurm.conf.
    If the configuration is invalid, then an error message will be printed and
    the command or daemon (including slurmctld) will not run.
  * slurmrestd/v0.0.37 - Add update_time field to partitions/reservations query
    to allow clients to only get the entities list when something changed.
  * slurmdbd.service - add "After" relationship to all common names for MariaDB
    to reduce startup delays.
  * slurmrestd/v0.0.37 - Correct displaying node states that are UNKNOWN.
  * slurmrestd/v0.0.37 - Add flags to node states.
  * Fix first job on fresh cluster not being assigned JobId=1 (or FirstJobId).
  * squeue - make it so --nodelist is sensitive to --clusters.
  * squeue - do --nodelist node validation in the same order as listing.
  * Removed AccountingStoreJobComment option.  Please update your config to use
    AccountingStoreFlags=job_comment instead.
  * AccountingStoreFlags=job_script allows you to store the job's batch script.
  * AccountingStoreFlags=job_env allows you to store the job's env vars.
  * Add sacct -o SubmitLine to get the submit line of a job/step.
  * Removed DefaultStorage{Host,Loc,Pass,Port,Type,User} options.
  * Fix NtasksPerTRES delimiter from : to = in scontrol show job output.
  * Removed CacheGroups, CheckpointType, JobCheckpointDir, MemLimitEnforce,
    SchedulerPort, SchedulerRootFilter options.
  * Make job accounting queries use consistent timeframes with and w/o jobs.
  * --cpus-per-task and --threads-per-core now imply --exact.
    This fixes issues where steps would be allocated the wrong number of CPUs.
  * configure: the --with option handling has been made consistent across the
    various optional libraries. Specifying *-with-foo=/path/to/foo will only
    check that directory for the applicable library (rather than, in some cases,
    falling back to the default directories), and will always error the build
    if the library is not found (instead of a mix of error messages and non-
    fatal warning messages).
  * configure: replace --with-rmsi_dir option with proper handling for
    *-with-rsmi=dir.
  * Pass additional job environment variables to MailProg.
  * Add SLURM_JOB_WORK_DIR to Prolog, Epilog.
  * Removed sched/hold plugin.
  * Fix srun overwriting SLURM_SUBMIT_DIR and SLURM_SUBMIT_HOST when within an
    existing allocation.
  * step_ctx code has been removed from the api.
  * cli_filter/lua, jobcomp/lua, job_submit/lua now load their scripts from the
    same directory as the slurm.conf file (and thus now will respect changes
    to the SLURM_CONF environment variable).
  * SPANK - call slurm_spank_init if defined without slurm_spank_slurmd_exit in
    slurmd context.
  * job_container/tmpfs - Remove need for .active file to allow salloc without
    an interactive step to work.
  * slurmd - Delay background node registration on every failure up to 128s on
    startup.
  * slurmctld - Always notify slurmd that node registration was accepted to
    avoid slurmd needless attempting to re-register if there is configuration
    issue.
  * Put node into "INVAL" state upon registering with an invalid node
    configuration. Node must register with a valid configuration to continue.
  * Make --cpu-bind=threads default for --threads-per-core -- cli and env can
    override.
  * jobcomp/elasticsearch - Use data_t to serialize data. The plugin now has the
    JSON-C library as a prerequisite.
  * scrontab - create the temporary file under the TMPDIR environment variable
    (if set), otherwise continue to use TmpFS as configured in slurm.conf.
  * Add LastBusyTime to "scontrol show nodes" and slurmrestd nodes output,
    which represents the time the node last had jobs on it.
  * slurmd - allow multiple comma-separated controllers to be specified in
    configless mode with *-conf-server
  * sacctmgr - changed column headings to "ParentID" and "ParentName" instead
    of "Par ID" and "Par Name" respectively.
  * Perl API - make sure man pages are installed under the --prefix given to
    configure.
  * Manually powering down of nodes with scontrol now ignores
    SuspendExc<Nodes|Parts>.
  * SALLOC_THREADS_PER_CORE and SBATCH_THREADS_PER_CORE have been added as
    input environment variables for salloc and sbatch, respectively. They do
    the same thing as *-threads-per-core.
  * Distinguish queued reboot requests (REBOOT) from issued reboots (REBOOT^).
  * Set the maximum number of open files per process to 4096 to avoid
    performance issues when closing the entire range with closeall().
  * auth/jwt - add support for RS256 tokens.
  * Relax reservation purge due to any invalid uid after creation time.
  * Reject srun that requests both --exclusive and --overlap.
  * service files - change dependency to network-online rather than just
    network to ensure DNS and other services are available.
  * RSMI: Fix incorrect PCI BDF bits.
  * plugins/cli_filter - Convert to using data_t to serialize JSON.
  * Fix testing array job after regaining locks in backfill.
  * Don't display node's comment with "scontrol show nodes" unless set.
  * Add "Extra" field to node to store extra information other than a comment.
  * scrontab - Use /tmp instead of TmpFS if TMPDIR is not set.
  * Add ResumeTimeout, SuspendTimeout and SuspendTime to Partitions.
  * sreport - change to sorting TopUsage by the --tres option.
  * slurmrestd - do not run allow operation as SlurmUser/root by default.
  * Allow map_cpu and mask_cpu for non-whole node allocation.
  * TaskPluginParam=verbose is now treated as a default. Previously it would be
    applied regardless of the job specifying a *-cpu-bind.
  * Add "node_reg_mem_percent" SlurmctldParameter to define percentage of
    memory nodes are allowed to register with.
  * Show correct number of SocketsPerBoard in slurmd -C with hwloc2.
  * Alter sreport's cluster utilization report column name from
    'Reserved' to 'Planned' to match the nomenclature of the 'Planned' node.
  * Add StateComplete format option to sinfo to show base_state+flags.
  * "scontrol show node" now shows State as base_state+flags instead of
    shortened state with flags appended. eg. IDLE# *> IDLE+POWERING_UP.
    Also "POWER" state flag string is "POWERED_DOWN".
  * slurmd/req - add missing job_env_t's het_job_id initialization off the
    request in _rpc_{abort,terminate}_job(). This caused problems for Native
    Cray builds when joining a CNCU job_container plugin with Epilog configured.
  * Fix joining a CNCU job_container on a Native Cray build before executing the
    UnkillableStepProgram for a HetJob step.
  * slurmrestd/v0.0.35 - Plugin has been tagged as deprecated.
  * srun - Job steps requiring more cores than available to be rejected unless
    '--overlap' is specificed.
  * Add bf_node_space_size to SchedulerParameters.
  * Add scontrol update node state=POWER_DOWN_FORCE and POWER_DOWN_ASAP as new
    ways to power off and reset especially CLOUD nodes.
  * Define and separate node power state transitions. Previously a powering
    down node was in both states, POWERING_OFF and POWERED_OFF. These are now
    separated.
  * Create a new process called slurmscriptd which runs PrologSlurmctld and
    EpilogSlurmctld. This avoids fork() calls from slurmctld, and can avoid
    performance issues if the slurmctld has a large memory footprint.
  * Added new Script option to DebugFlags for debugging slurmscriptd.
  * scrontab - add ability to update crontab from a file or standard input.
  * scrontab - add ability to set and expand variables.
  * Pass JSON of job to node mappings to ResumeProgram.
  * If running steps in an allocation with CR_PACK_NODE or -mpack the srun will
    only attempt to allocate as much as needed from the allocation instead
    of always trying to allocate every node in the allocation.
  * Jobs that request the whole node now check to see if any gres are allocated.
  * Rename SbcastParameters to BcastParameters.
  * Make srun sensitive to BcastParameters.
  * RSMI: Add gres_links_create_empty() and preserve RSMI enumeration order.
  * GPUs: Use index instead of dev_num for CUDA_VISIBLE_DEVICES
  * Don't run epilog on nodes if job never launched.
  * QOS accrue limits only apply to the job QOS, not partition QOS.
  * Add --gpu-bind=per_task:<gpus_per_task> option, --gpus-per-task will now
    set this option by default.
  * Treat any return code from SPANK plugin that is not SLURM_SUCCESS to be an
    error or rejection.
  * Print the statistics for extern step adopted processes in sstat.
  * Fix SLURM_NODE_ALIASES to work for ipv6 node addrs.
  * Add support for automatically detecting and broadcasting executable shared
    object dependencies for sbcast and srun *-bcast.

-------------------------------------------------------------------
Fri Jul  2 08:01:32 UTC 2021 - Christian Goll <cgoll@suse.com>

- Updated to  20.11.8:
  * slurmctld - fix erroneous "StepId=CORRUPT" messages in error logs.
  * Correct the error given when auth plugin fails to pack a credential.
  * Fix unused-variable compiler warning on FreeBSD in fd_resolve_path().
  * acct_gather_filesystem/lustre - only emit collection error once per step.
  * Add GRES environment variables (e.g., CUDA_VISIBLE_DEVICES) into the
    interactive step, the same as is done for the batch step.
  * Fix various potential deadlocks when altering objects in the database
    dealing with every cluster in the database.
  * slurmrestd:
   - handle slurmdbd connection failures without segfaulting.
   - fix segfault for searches in slurmdb/v0.0.36/jobs.
   - remove (non-functioning) users query parameter for
     slurmdb/v0.0.36/jobs from openapi.json
   - fix segfault in slurmrestd db/jobs with numeric queries
   - add argv handling for job/submit endpoint.
   - add description for slurmdb/job endpoint.
  * slurmrestd/dbv0.0.36:
   - Fix values dumped in job state/current and
     job step state.
   - Correct description for previous state property.
  * srun:
   - fix broken node step allocation in a heterogeneous allocation.
   - leave SLURM_DIST_UNKNOWN as default for --interactive.
  * Fail step creation if -n is not multiple of --ntasks-per-gpu.
  * job_container/tmpfs - Fix slowdown on teardown.
  * Fix problem with SlurmctldProlog where requeued jobs would never launch.
  * job_container/tmpfs - Fix issue when restarting slurmd where the namespace
    mount points could disappear.
  * sacct:
   - avoid truncating JobId at 34 characters.
   - fix segfault when printing StepId (or when using --long).
  * scancel - fix segfault when --wckey filtering option is used.
  * select/cons_tres - Fix memory leak.
  * Prevent file descriptor leak in job_container/tmpfs on slurmd restart.
  * perlapi/libslurmdb - expose tres_req_str to job hash.
  * scrontab - close and reopen temporary crontab file to deal with editors
    that do not change the original file, but instead write out then rename
    a new file.
  * sstat - fix linking so that it will work when --without-shared-libslurm
    was used to build Slurm.
  * Clear allocated cpus for running steps in a job before handling requested
    nodes on new step.
  * Don't reject a step if not enough nodes are available. Instead, defer the
    step until enough nodes are available to satisfy the request.
  * Don't reject a step if it requests at least one specific node that is
    already allocated to another step. Instead, defer the step until the
    requested node(s) become available.
  * Better handling of --mem=0.
  * Ignore DefCpuPerGpu when --cpus-per-task given.

-------------------------------------------------------------------
Fri May 14 10:07:04 UTC 2021 - Christian Goll <cgoll@suse.com>

- Updated to 20.11.7 which fixes CVE-2021-31215 (bsc#1186024)
- New features in 20.11.7:
 * slurmd - handle configless failures gracefully instead of hanging
   indefinitely.
 * select/cons_tres - fix Dragonfly topology not selecting nodes in the same
   leaf switch when it should as well as requests with *-switches option.
 * Fix issue where certain step requests wouldn't run if the first node in the
   job allocation was full and there were idle resources on other nodes in
   the job allocation.
 * Fix deadlock issue with <Prolog|Epilog>Slurmctld.
 * torque/qstat - fix printf error message in output.
 * When adding associations or wckeys avoid checking multiple times a user or
   cluster name.
 * Fix wrong jobacctgather information on a step on multiple nodes
   due to timeouts sending its the information gathered on its node.
 * Fix missing xstrdup which could result in slurmctld segfault on array jobs.
 * Fix security issue in PrologSlurmctld and EpilogSlurmctld by always
   prepending SPANK_ to all user-set environment variables. CVE-2021-31215.
- New features in 20.11.6:
 * Fix sacct assert with the --qos option.
 * Use pkg-config --atleast-version instead of --modversion for systemd.
 * common/fd - fix getsockopt() call in fd_get_socket_error().
 * Properly handle the return from fd_get_socket_error() in _conn_readable().
 * cons_res - Fix issue where running jobs were not taken into consideration
   when creating a reservation.
 * Avoid a deadlock between job_list for_each and assoc QOS_LOCK.
 * Fix TRESRunMins usage for partition qos on restart/reconfig.
 * Fix printing of number of tasks on a completed job that didn't request
   tasks.
 * Fix updating GrpTRESRunMins when decrementing job time is bigger than it.
 * Make it so we handle multithreaded allocations correctly when doing
   --exclusive or --core-spec allocations.
 * Fix incorrect round-up division in _pick_step_cores
 * Use appropriate math to adjust cpu counts when --ntasks-per-core=1.
 * cons_tres - Fix consideration of power downed nodes.
 * cons_tres - Fix DefCpuPerGPU, increase cpus-per-task to match with
   gpus-per-task * cpus-per-gpu.
 * Fix under-cpu memory auto-adjustment when MaxMemPerCPU is set.
 * Make it possible to override CR_CORE_DEFAULT_DIST_BLOCK.
 * Perl API - fix retrieving/storing of slurm_step_id_t in job_step_info_t.
 * Recover state of burst buffers when slurmctld is restarted to avoid skipping
   burst buffer stages.
 * Fix race condition in burst buffer plugin which caused a burst buffer
   in stage-in to not get state saved if slurmctld stopped.
 * auth/jwt - print an error if jwt_file= has not been set in slurmdbd.
 * Fix RESV_DEL_HOLD not being a valid state when using squeue --states.
 * Add missing squeue selectable states in valid states error message.
 * Fix scheduling last array task multiple times on error, causing segfault.
 * Fix issue where a step could be allocated more memory than the job when
   dealing with --mem-per-cpu and --threads-per-core.
 * Fix removing qos from assoc with -= can lead to assoc with no qos
 * auth/jwt - fix segfault on invalid credential in slurmdbd due to
   missing validate_slurm_user() function in context.
 * Fix single Port= not being applied to range of nodes in slurm.conf
 * Fix Jobs not requesting a tres are not starting because of that tres limit.
 * acct_gather_energy/rapl - fix AveWatts calculation.
 * job_container/tmpfs - Fix issues with cleanup and slurmd restarting on
   running jobs.

-------------------------------------------------------------------
Mon May  3 16:09:44 UTC 2021 - Egbert Eich <eich@suse.com>

- Ship REST API version and auth plugins with slurmrestd.
- Add YAML support for REST API to build (bsc#1185603).

-------------------------------------------------------------------
Wed Mar 17 08:55:58 UTC 2021 - Christian Goll <cgoll@suse.com>

- Udpate to 20.11.5:
- New features:
 * New job_container/tmpfs plugin developed by NERSC that can be used to 
   create per-job filesystem namespaces.  Documentaiion and configuration
   can be found in the respecting man page.
- Bug fixes:
 * Fix main scheduler bug where bf_hetjob_prio truncates SchedulerParameters.
 * Fix sacct not displaying UserCPU, SystemCPU and TotalCPU for large times.
 * scrontab - fix to return the correct index for a bad #SCRON option.
 * scrontab - fix memory leak when invalid option found in #SCRON line.
 * Add errno for when a user requests multiple partitions and they are using
   partition based associations.
 * Fix issue where a job could run in a wrong partition when using
   EnforcePartLimits=any and partition based associations.
 * Remove possible deadlock when adding associations/wckeys in multiple
   threads.
 * When using PrologFlags=alloc make sure the correct Slurm version is set
   in the credential.
 * When sending a job a warning signal make sure we always send SIGCONT
   beforehand.
 * Fix issue where a batch job would continue running if a prolog failed on a
   node that wasn't the batch host and requeuing was disabled.
 * Fix issue where sometimes salloc/srun wouldn't get a message about a prolog
   failure in the job's stdout.
 * Requeue or kill job on a prolog failure when PrologFlags is not set.
 * Fix race condition causing node reboots to get requeued before
   ResumeTimeout expires.
 * Preserve node boot_req_time on reconfigure.
 * Preserve node power_save_req_time on reconfigure.
 * Fix node reboots being queued and issued multiple times and preventing the
   reboot to time out.
 * Fix run_command to exit correctly if track_script kills the calling thread.
 * Only requeue a job when the PrologSlurmctld returns nonzero.
 * When a job is signaled with SIGKILL make sure we flush all
   prologs/setup scripts.
 * Handle burst buffer scripts if the job is canceled while stage_in is
   happening.
 * When shutting down the slurmctld make note to ignore error message when
   we have to kill a prolog/setup script we are tracking.
 * scrontab - add support for the --open-mode option.
 * acct_gather_profile/influxdb - avoid segfault on plugin shutdown if setup
   has not completed successfully.
 * Reduce delay in starting salloc allocations when running with prologs.
 * Alter AllocNodes check to work if the allocating node's domain doesn't
   match the slurmctld's. This restores the pre*20.11 behavior.
 * Fix slurmctld segfault if jobs from a prior version had the now-removed
   INVALID_DEPEND state flag set and were allowed to run in 20.11.
 * Add job_container/tmpfs plugin to give a method to provide a private /tmp
   per job.
 * Set the correct core affinity when using AutoDetect.
 * slurmrestd - mark "environment" as required for job submissions in schema.

-------------------------------------------------------------------
Tue Feb 23 16:24:16 UTC 2021 - Christian Goll <cgoll@suse.com>

- Udpate to 20.11.04
 * Fix node selection for advanced reservations with features.
 * mpi/pmix: Handle pipe failure better when using ucx.
 * mpi/pmix: include PMIX_NODEID for each process entry.
 * Fix job getting rejected after being requeued on same node that died.
 * job_submit/lua - add "network" field.
 * Fix situations when a reoccuring reservation could erroneously skip a
   period.
 * Ensure that a reservations [pro|epi]log are ran on reoccuring reservations.
 * Fix threads-per-core memory allocation issue when using CR_CPU_MEMORY.
 * Fix scheduling issue with --gpus.
 * Fix gpu allocations that request --cpus-per-task.
 * mpi/pmix: fixed print messages for all PMIXP_* macros
 * Add mapping for XCPU to --signal option.
 * Fix regression in 20.11 that prevented a full pass of the main scheduler
   from ever executing.
 * Work around a glibc bug in which "0" is incorrectly printed as "nan"
   which will result in corrupted association state on restart.
 * Fix regression in 20.11 which made slurmd incorrectly attempt to find the
   parent slurmd address when not applicable and send incorrect reverse*tree
   info to the slurmstepd.
 * Fix cgroup ns detection when using containers (e.g. LXC or Docker).
 * scrontab - change temporary file handling to work with emacs. 
- Removed check-for-lipmix.so.MAJOR.patch
- Added: load-pmix-major-version.patch

-------------------------------------------------------------------
Wed Jan 20 10:13:23 UTC 2021 - Ana Guerrero Lopez <aguerrero@suse.com>

- Update to 20.11.03
- This release includes a major functional change to how job step launch is 
  handled compared to the previous 20.11 releases. This affects srun as 
  well as MPI stacks - such as Open MPI - which may use srun internally as 
  part of the process launch.
  One of the changes made in the Slurm 20.11 release was to the semantics 
  for job steps launched through the 'srun' command. This also 
  inadvertently impacts many MPI releases that use srun underneath their 
  own mpiexec/mpirun command.
  For 20.11.{0,1,2} releases, the default behavior for srun was changed  
  such that each step was allocated exactly what was requested by the 
  options given to srun, and did not have access to all resources assigned 
  to the job on the node by default. This change was equivalent to Slurm 
  setting the --exclusive option by default on all job steps. Job steps 
  desiring all resources on the node needed to explicitly request them 
  through the new '--whole' option.
  In the 20.11.3 release, we have reverted to the 20.02 and older behavior 
  of assigning all resources on a node to the job step by default.
  This reversion is a major behavioral change which we would not generally 
  do on a maintenance release, but is being done in the interest of 
  restoring compatibility with the large number of existing Open MPI (and 
  other MPI flavors) and job scripts that exist in production, and to 
  remove what has proven to be a significant hurdle in moving to the new 
  release.
  Please note that one change to step launch remains - by default, in 
  20.11 steps are no longer permitted to overlap on the resources they 
  have been assigned. If that behavior is desired, all steps must 
  explicitly opt-in through the newly added '--overlap' option.
  Further details and a full explanation of the issue can be found at:
  https://bugs.schedmd.com/show_bug.cgi?id=10383#c63
- Other changes from 20.11.03
  * Fix segfault when parsing bad "#SBATCH hetjob" directive.
  * Allow countless gpu:<typenode GRES specifications in slurm.conf.
  * PMIx - Don't set UCX_MEM_MMAP_RELOC for older version of UCX (pre 1.5).
  * Don't green-light any GPU validation when core conversion fails.
  * Allow updates to a reservation in the database that starts in the future.
  * Better check/handling of primary key collision in reservation table.
  * Improve reported error and logging in _build_node_list().
  * Fix uninitialized variable in _rpc_file_bcast() which could lead to an
    incorrect error return from sbcast / srun --bcast.
  * mpi/cray_shasta - fix use-after-free on error in _multi_prog_parse().
  * Cray - Handle setting correct prefix for cpuset cgroup with respects to
    expected_usage_in_bytes.  This fixes Cray's OOM killer.
  * mpi/pmix: Fix PMIx_Abort support.
  * Don't reject jobs allocating more cores than tasks with MaxMemPerCPU.
  * Fix false error message complaining about oversubscribe in cons_tres.
  * scrontab - fix parsing of empty lines.
  * Fix regression causing spank_process_option errors to be ignored.
  * Avoid making multiple interactive steps.
  * Fix corner case issues where step creation should fail.
  * Fix job rejection when --gres is less than --gpus.
  * Fix regression causing spank prolog/epilog not to be called unless the
    spank plugin was loaded in slurmd context.
  * Fix regression preventing SLURM_HINT=nomultithread from being used
    to set defaults for salloc->srun, sbatch->srun sequence.
  * Reject job credential if non-superuser sets the LAUNCH_NO_ALLOC flag.
  * Make it so srun --no-allocate works again.
  * jobacct_gather/linux - Don't count memory on tasks that have already
    finished.
  * Fix 19.05/20.02 batch steps talking with a 20.11 slurmctld.
  * jobacct_gather/common - Do not process jobacct's with same taskid when
    calling prec_extra.
  * Cleanup all tracked jobacct tasks when extern step child process finishes.
  * slurmrestd/dbv0.0.36 - Correct structure of dbv0.0.36_tres_list.
  * Fix regression causing task/affinity and task/cgroup to be out of sync when
    configured ThreadsPerCore is different than the physical threads per core.
  * Fix situation when --gpus is given but not max nodes (-N1-1) in a job
    allocation.
  * Interactive step - ignore cpu bind and mem bind options, and do not set
    the associated environment variables which lead to unexpected behavior
    from srun commands launched within the interactive step.
  * Handle exit code from pipe when using UCX with PMIx.

-------------------------------------------------------------------
Fri Jan  8 13:27:02 UTC 2021 - Egbert Eich <eich@suse.com>

- Fix fallout introduced by:
  "Replace  '%service_del_postun -n' with '%service_del_postun_without_restart'"
  for older Leap/SLE versions.

-------------------------------------------------------------------
Fri Jan  8 12:20:27 UTC 2021 - Egbert Eich <eich@suse.com>

- Fix Provides:/Conflicts: for libnss_slurm (bsc#1180700).

-------------------------------------------------------------------
Tue Jan  5 08:02:02 UTC 2021 - Ana Guerrero Lopez <aguerrero@suse.com>

- Add support for configuration files from external plugins. 
  While built-in plugins have their configuration added in slurm.conf,
  external SPANK plugins add their configuration to plugstack.conf
  To allow packaging easily spank plugins, their configuration files
  should be added independently at /etc/spack/plugstack.conf.d and
  plugstack.conf should be left with an oneliner including all the
  files under /etc/spack/plugstack.conf.d

-------------------------------------------------------------------
Mon Dec 28 14:37:58 UTC 2020 - Ana Guerrero Lopez <aguerrero@suse.com>

- Update to 20.11.02 
  * Fix older versions of sacct not working with 20.11.
  * Fix slurmctld crash when using a pre-20.11 srun in a job allocation.
  * Correct logic problem in _validate_user_access.
  * Fix libpmi to initialize Slurm configuration correctly.

- Update to 20.11.01
  * Fix spelling of "overcomited" to "overcomitted" in sreport's cluster
    utilization report.
  * Silence debug message about shutting down backup controllers if none are
    configured.
  * Don't create interactive srun until PrologSlurmctld is done.
  * Fix fd symlink path resolution.
  * Fix slurmctld segfault on subnode reservation restore after node
    configuration change.
  * Fix resource allocation response message environment allocation size.
  * Ensure that details->env_sup is NULL terminated.
  * select/cray_aries - Correctly remove jobs/steps from blades using NPC.
  * cons_tres - Avoid max_node_gres when entire node is allocated with
    --ntasks-per-gpu.
  * Allow NULL arg to data_get_type().
  * In sreport have usage for a reservation contain all jobs that ran in the
    reservation instead of just the ones that ran in the time specified. This
    matches the report for the reservation is not truncated for a time period.
  * Fix issue with sending wrong batch step id to a < 20.11 slurmd.
  * Add a job's alloc_node to lua for job modification and completion.
  * Fix regression getting a slurmdbd connection through the perl API.
  * Stop the extern step terminate monitor right after proctrack_g_wait().
  * Fix removing the normalized priority of assocs.
  * slurmrestd/v0.0.36 - Use correct name for partition field:
    "min nodes per job" -"min_nodes_per_job".
  * slurmrestd/v0.0.36 - Add node comment field.
  * Fix regression marking cloud nodes as "unexpectedly rebooted" after
    multiple boots.
  * Fix slurmctld segfault in _slurm_rpc_job_step_create().
  * slurmrestd/v0.0.36 - Filter node states against NODE_STATE_BASE to avoid
    the extended states all being reported as "invalid".
  * Fix race that can prevent the prolog for a requeued job from running.
  * cli_filter - add "type" to readily distinguish between the CLI command in
    use.
  * smail - reduce sleep before seff to 5 seconds.
  * Ensure SPANK prolog and epilog run without an explicit PlugStackConfig.
  * Disable MySQL automatic reconnection.
  * Fix allowing "b" after memory unit suffixes.
  * Fix slurmctld segfault with reservations without licenses.
  * Due to internal restructuring ahead of the 20.11 release, applications
    calling libslurm MUST call slurm_init(NULL) before any API calls.
    Otherwise the API call is likely to fail due to libslurm's internal
    configuration not being available.
  * slurm.spec - allow custom paths for PMIx and UCX install locations.
  * Use rpath if enabled when testing for Mellanox's UCX libraries.
  * slurmrestd/dbv0.0.36 - Change user query for associations to optional.
  * slurmrestd/dbv0.0.36 - Change account query for associations to optional.
  * mpi/pmix - change the error handler error message to be more useful.
  * Add missing connection in acct_storage_p_{clear_stats, reconfig, shutdown}.
  * Perl API - fix issue when running in configless mode.
  * nss_slurm - avoid deadlock when stray sockets are found.
  * Display correct value for ScronParameters in 'scontrol show config'

-------------------------------------------------------------------
Mon Nov 30 20:48:01 UTC 2020 - Egbert Eich <eich@suse.com>

- Update to version 20.11.0
  Slurm 20.11 includes a number of new features including:
  * Overhaul of the job step management and launch code, alongside improved
    GPU task placement support.
  * A new "Interactive Step" mode of operation for salloc.
  * A new "scrontab" command that can be used to submit and manage
    periodically repeating jobs.
  * IPv6 support.
  * Changes to the reservation logic, with new options allowing users
    to delete reservations, allowing admins to skip the next occurance of a
    repeated reservation, and allowing for a job to be submitted and eligible
    to run within multiple reservations.
  * Dynamic Future Nodes - automatically associate a dynamically
    provisioned (or "cloud") node against a NodeName definition with matching
    hardware.
  * An experimental new RPC queuing mode for slurmctld to reduce thread
    contention on heavily loaded clusters.
  * SlurmDBD integration with the Slurm REST API.
  Also check
  https://github.com/SchedMD/slurm/blob/slurm-20-11-0-1/RELEASE_NOTES
  
-------------------------------------------------------------------
Wed Nov 18 08:40:59 UTC 2020 - Ana Guerrero Lopez <aguerrero@suse.com>

- Updated to 20.02.6, addresses two security fixes:
  * PMIx - fix potential buffer overflows from use of unpackmem().
    CVE-2020-27745 (bsc#1178890)
  * X11 forwarding - fix potential leak of the magic cookie when sent as an
     argument to the xauth command. CVE-2020-27746 (bsc#1178891)
- And many other bugfixes, full log and details available at:
  * https://lists.schedmd.com/pipermail/slurm-announce/2020/000045.html

-------------------------------------------------------------------
Tue Nov  3 14:31:02 UTC 2020 - Franck Bui <fbui@suse.com>

- Replace  '%service_del_postun -n' with '%service_del_postun_without_restart'

'-n' is deprecated and will be removed in the future.

-------------------------------------------------------------------
Thu Oct 29 12:35:18 UTC 2020 - Ana Guerrero Lopez <aguerrero@suse.com>

- Updated to 20.02.5, changes:
 * Fix leak of TRESRunMins when job time is changed with --time-min
 * pam_slurm - explicitly initialize slurm config to support configless mode.
 * scontrol - Fix exit code when creating/updating reservations with wrong
   Flags.
 * When a GRES has a no_consume flag, report 0 for allocated.
 * Fix cgroup cleanup by jobacct_gather/cgroup.
 * When creating reservations/jobs don't allow counts on a feature unless
   using an XOR.
 * Improve number of boards discovery
 * Fix updating a reservation NodeCnt on a zero-count reservation.
 * slurmrestd - provide an explicit error messages when PSK auth fails.
 * cons_tres - fix job requesting single gres per-node getting two or more
   nodes with less CPUs than requested per-task.
 * cons_tres - fix calculation of cores when using gres and cpus-per-task.
 * cons_tres - fix job not getting access to socket without GPU or with less
   than --gpus-per-socket when not enough cpus available on required socket
   and not using --gres-flags=enforce binding.
 * Fix HDF5 type version build error.
 * Fix creation of CoreCnt only reservations when the first node isn't
   available.
 * Fix wrong DBD Agent queue size in sdiag when using accounting_storage/none.
 * Improve job constraints XOR option logic.
 * Fix preemption of hetjobs when needed nodes not in leader component.
 * Fix wrong bit_or() messing potential preemptor jobs node bitmap, causing
   bad node deallocations and even allocation of nodes from other partitions.
 * Fix double-deallocation of preempted non-leader hetjob components.
 * slurmdbd - prevent truncation of the step nodelists over 4095.
 * Fix nodes remaining in drain state state after rebooting with ASAP option.

- changes from 20.02.4:
 * srun - suppress job step creation warning message when waiting on
   PrologSlurmctld.
 * slurmrestd - fix incorrect return values in data_list_for_each() functions.
 * mpi/pmix - fix issue where HetJobs could fail to launch.
 * slurmrestd - set content-type header in responses.
 * Fix cons_res GRES overallocation for --gres-flags=disable-binding.
 * Fix cons_res incorrectly filtering cores with respect to GRES locality for
   --gres-flags=disable-binding requests.
 * Fix regression where a dependency on multiple jobs in a single array using
   underscores would only add the first job.
 * slurmrestd - fix corrupted output due to incorrect use of memcpy().
 * slurmrestd - address a number of minor Coverity warnings.
 * Handle retry failure when slurmstepd is communicating with srun correctly.
 * Fix jobacct_gather possibly duplicate stats when _is_a_lwp error shows up.
 * Fix tasks binding to GRES which are closest to the allocated CPUs.
 * Fix AMD GPU ROCM 3.5 support.
 * Fix handling of job arrays in sacct when querying specific steps.
 * slurmrestd - avoid fallback to local socket authentication if JWT
   authentication is ill-formed.
 * slurmrestd - restrict ability of requests to use different authentication
   plugins.
 * slurmrestd - unlink named unix sockets before closing.
 * slurmrestd - fix invalid formatting in openapi.json.
 * Fix batch jobs stuck in CF state on FrontEnd mode.
 * Add a separate explicit error message when rejecting changes to active node
   features.
 * cons_common/job_test - fix slurmctld SIGABRT due to double-free.
 * Fix updating reservations to set the duration correctly if updating the
   start time.
 * Fix update reservation to promiscuous mode.
 * Fix override of job tasks count to max when ntasks-per-node present.
 * Fix min CPUs per node not being at least CPUs per task requested.
 * Fix CPUs allocated to match CPUs requested when requesting GRES and
   threads per core equal to one.
 * Fix NodeName config parsing with Boards and without CPUs.
 * Ensure SLURM_JOB_USER and SLURM_JOB_UID are set in SrunProlog/Epilog.
 * Fix error messages for certain invalid salloc/sbatch/srun options.
 * pmi2 - clean up sockets at step termination.
 * Fix 'scontrol hold' to work with 'JobName'.
 * sbatch - handle --uid/--gid in #SBATCH directives properly.
 * Fix race condition in job termination on slurmd.
 * Print specific error messages if trying to run use certain
   priority/multifactor factors that cannot work without SlurmDBD.
 * Avoid partial GRES allocation when --gpus-per-job is not satisfied.
 * Cray - Avoid referencing a variable outside of it's correct scope when
   dealing with creating steps within a het job.
 * slurmrestd - correctly handle larger addresses from accept().
 * Avoid freeing wrong pointer with SlurmctldParameters=max_dbd_msg_action
   with another option after that.
 * Restore MCS label when suspended job is resumed.
 * Fix insufficient lock levels.
 * slurmrestd - use errno from job submission.
 * Fix "user" filter for sacctmgr show transactions.
 * Fix preemption logic.
 * Fix no_consume GRES for exclusive (whole node) requests.
 * Fix regression in 20.02 that caused an infinite loop in slurmctld when
   requesting --distribution=plane for the job.
 * Fix parsing of the --distribution option.
 * Add CONF READ_LOCK to _handle_fed_send_job_sync.
 * prep/script - always call slurmctld PrEp callback in _run_script().
 * Fix node estimation for jobs that use GPUs or --cpus-per-task.
 * Fix jobcomp, job_submit and cli_filter Lua implementation plugins causing
   slurmctld and/or job submission CLI tools segfaults due to bad return
   handling when the respective Lua script failed to load.
 * Fix propagation of gpu options through hetjob components.
 * Add SLURM_CLUSTERS environment variable to scancel.
 * Fix packing/unpacking of "unlinked" jobs.
 * Connect slurmstepd's stderr to srun for steps launched with --pty.
 * Handle MPS correctly when doing exclusive allocations.
 * slurmrestd - fix compiling against libhttpparser in a non-default path.
 * slurmrestd - avoid compilation issues with libhttpparser < 2.6.
 * Fix compile issues when compiling slurmrestd without --enable-debug.
 * Reset idle time on a reservation that is getting purged.
 * Fix reoccurring reservations that have Purge_comp= to keep correct
   duration if they are purged.
 * scontrol - changed the "PROMISCUOUS" flag to "MAGNETIC"
 * Early return from epilog_set_env in case of no_consume.
 * Fix cons_common/job_test start time discovery logic to prevent skewed
   results between "will run test" executions.
 * Ensure TRESRunMins limits are maintained during "scontrol reconfigure".
 * Improve error message when host lookup fails.

- Refresh patch: pam_slurm-Initialize-arrays-and-pass-sizes.patch

-------------------------------------------------------------------
Tue Jul  7 09:05:40 UTC 2020 - Egbert Eich <eich@suse.com>

- Add support for openPMIx also for Leap/SLE 15.0/1 (bsc#1173805).
- Do not run %check on SLE-12-SP2: Some incompatibility in tcl
  makes this fail.
- Remove unneeded build dependency to postgresql-devel.
- Disable build on s390 (requires 64bit).

-------------------------------------------------------------------
Wed Jun  3 11:11:11 UTC 2020 - Egbert Eich <eich@suse.com>

- Bring QA to the package build: add %%check stage.
- Remove cruft that isn't needed any longer.
- Add 'ghosted' run-file.
- Add rpmlint filter to handle issues with library packages
  for Leap and enterprise upgrade versions.

-------------------------------------------------------------------
Fri May 22 08:45:46 UTC 2020 - Christian Goll <cgoll@suse.com>

- Updated to 20.02.3 which fixes CVE-2020-12693 (bsc#1172004).
- Other changes are:
 * Factor in ntasks-per-core=1 with cons_tres.
 * Fix formatting in error message in cons_tres.
 * Fix calling stat on a NULL variable.
 * Fix minor memory leak when using reservations with flags=first_cores.
 * Fix gpu bind issue when CPUs=Cores and ThreadsPerCore > 1 on a node.
 * Fix --mem-per-gpu for heterogenous --gres requests.
 * Fix slurmctld load order in load_all_part_state().
 * Fix race condition not finding jobacct gather task cgroup entry.
 * Suppress error message when selecting nodes on disjoint topologies.
 * Improve performance of _pack_default_job_details() with large number of job
 * arguments.
 * Fix archive loading previous to 17.11 jobs per-node req_mem.
 * Fix regresion validating that --gpus-per-socket requires --sockets-per-node
 * for steps. Should only validate allocation requests.
 * error() instead of fatal() when parsing an invalid hostlist.
 * nss_slurm - fix potential deadlock in slurmstepd on overloaded systems.
 * cons_tres - fix --gres-flags=enforce-binding and related --cpus-per-gres.
 * cons_tres - Allocate lowest numbered cores when filtering cores with gres.
 * Fix getting system counts for named GRES/TRES.
 * MySQL - Fix for handing typed GRES for association rollups.
 * Fix step allocations when tasks_per_core > 1.
 * Fix allocating more GRES than requested when asking for multiple GRES types.

-------------------------------------------------------------------
Wed May  6 10:54:43 UTC 2020 - Egbert Eich <eich@suse.com>

- Treat libnss_slurm like any other package: add version string to
  upgrade package.

-------------------------------------------------------------------
Fri Mar 27 08:26:34 UTC 2020 - Christian Goll <cgoll@suse.com>

- Updated to 20.02.1 with following changes"
 * Improve job state reason for jobs hitting partition_job_depth.
 * Speed up testing of singleton dependencies.
 * Fix negative loop bound in cons_tres.
 * srun - capture the MPI plugin return code from mpi_hook_client_fini() and
   use as final return code for step failure.
 * Fix segfault in cli_filter/lua.
 * Fix --gpu-bind=map_gpu reusability if tasks > elements.
 * Make sure config_flags on a gres are sent to the slurmctld on node
   registration.
 * Prolog/Epilog - Fix missing GPU information.
 * Fix segfault when using config parser for expanded lines.
 * Fix bit overlap test function.
 * Don't accrue time if job begin time is in the future.
 * Remove accrue time when updating a job start/eligible time to the future.
 * Fix regression in 20.02.0 that broke --depend=expand.
 * Reset begin time on job release if it's not in the future.
 * Fix for recovering burst buffers when using high-availability.
 * Fix invalid read due to freeing an incorrectly allocated env array.
 * Update slurmctld -i message to warn about losing data.
 * Fix scontrol cancel_reboot so it clears the DRAIN flag and node reason for a
   pending ASAP reboot.

-------------------------------------------------------------------
Sun Mar  8 15:43:25 UTC 2020 - Egbert Eich <eich@suse.com>

- Remove legacy_cray: with 20.02 the special treatment for
  cray-specific plugins on SLE version prior to 15SP2 is
  no longer required.

-------------------------------------------------------------------
Wed Mar  4 13:05:07 UTC 2020 - Christian Goll <cgoll@suse.com>

- slurm-plugins will now also require pmix not only libpmix 
  (bsc#1164326)

-------------------------------------------------------------------
Fri Feb 28 17:27:43 UTC 2020 - Egbert Eich <eich@suse.com>

- Removed autopatch as it doesn't work for the SLE-11-SP4 build.

-------------------------------------------------------------------
Thu Feb 27 20:07:19 UTC 2020 - Kasimir _ <kasimir_@outlook.de>

- Disable %arm builds as this is no longer supported.

-------------------------------------------------------------------
Thu Feb 27 10:19:05 UTC 2020 - Christian Goll <cgoll@suse.com>

- pmix searches now also for libpmix.so.2 so that there is no dependency
  for devel package (bsc#1164386)
  * added patch file check-for-lipmix.so.MAJOR.patch
  * reworded patch file Remove-rpath-from-build.patch to use %autopatch

-------------------------------------------------------------------
Wed Feb 26 06:13:13 UTC 2020 - Egbert Eich <eich@suse.com>

- Update to version 20.02.0 (jsc#SLE-8491)
  * Fix minor memory leak in slurmd on reconfig.
  * Fix invalid ptr reference when rolling up data in the database.
  * Change shtml2html.py to require python3 for RHEL8 support, and match
    man2html.py.
  * slurm.spec - override "hardening" linker flags to ensure RHEL8 builds
    in a usable manner.
  * Fix type mismatches in the perl API.
  * Prevent use of uninitialized slurmctld_diag_stats.
  * Fixed various Coverity issues.
  * Only show warning about root-less topology in daemons.
  * Fix accounting of jobs in IGNORE_JOBS reservations.
  * Fix issue with batch steps state not loading correctly when upgrading from
    19.05.
  * Deprecate max_depend_depth in SchedulerParameters and move it to
    DependencyParameters.
  * Silence erroneous error on slurmctld upgrade when loading federation state.
  * Break infinite loop in cons_tres dealing with incorrect tasks per tres
    request resulting in slurmctld hang.
  * Improve handling of --gpus-per-task to make sure appropriate number of GPUs
    is assigned to job.
  * Fix seg fault on cons_res when requesting --spread-job.
- Move to python3 for everything but SLE-11-SP4
  * For SLE-11-SP4 add a workaround to handle a python3 script (python2.7
    compliant).

-------------------------------------------------------------------
Wed Feb 19 21:27:00 UTC 2020 - Egbert Eich <eich@suse.com>

- Add explicit version dependency to libpmix as well.
  'slurm-devel' has a tight version dependency on libpmix -
  allowing multiple libpmix versions in one package repository
  is therefore essential.

-------------------------------------------------------------------
Thu Feb 13 22:34:48 UTC 2020 - Egbert Eich <eich@suse.com>

- Update to version 20.02.0-rc1
  * sbatch - fix segfault when no newline at the end of a burst buffer file.
  * Change scancel to only check job's base state when matching -t options.
  * Save job dependency list in state files.
  * cons_tres - allow jobs to be run on systems with root-less topologies.
  * Restore pre-20.02pre1 PrologSlurmctld synchonization behavior to avoid
    various race conditions, and ensure proper batch job launch.
  * Add new slurmrestd command/daemon which implements the Slurm REST API.

-------------------------------------------------------------------
Tue Feb 11 10:09:43 UTC 2020 - Christian Goll <cgoll@suse.com>

- Update to version 20.02.0-0pre1, highlights are
  Highlights:
 * Exclusive behavior of a node includes all GRES on a node as well
   as the cpus.
 * Use python3 instead of python for internal build/test scripts.
   The slurm.spec file has been updated to depend on python3 as well.
 * Added new NodeSet configuration option to help simplify partition
   configuration sections for heterogeneous / condo*style clusters.
 * Added slurm.conf option MaxDBDMsgs to control how many messages will be
   stored in the slurmctld before throwing them away when the slurmdbd is down.
 * The checkpoint plugin interface and all associated API calls have been
   removed.
 * slurm_init_job_desc_msg() initializes mail_type as uint16_t. This allows
   mail_type to be set to NONE with scontrol.
 * Add new slurm_spank_log() function to print messages back to the user from
   within a SPANK plugin without prepending "error: " from slurm_error().
 * Enforce having partition name and nodelist=ALL when creating reservations
   with flags=PART_NODES.
 * SPANK - removed never-implemented slurm_spank_slurmd_init() interface. This
   hook has always been accessible through slurm_spank_init() in the
   S_CTX_SLURMD context instead.
 * sbcast - add new BcastAddr option to NodeName lines to allow sbcast traffic
   to flow over an alternate network path.
 * Added auth/jwt plugin, and 'scontrol token' subcommand.  PMIx - improve
 * performance of proc map generation.  Deprecate kill_invalid_depend in
 * SchedulerParameters and move it to a new
   option called DependencyParameters.
 * Enable job dependencies for any job on any cluster in the same federation.
 * Allow clusters to be added automatically to db at startup of ctld.  Add
 * AccountingStorageExternalHost slurm.conf parameter.  The
 * "ConditionPathExists" condition in slurmd.service has been disabled by
   default to permit simpler installation of a "configless" Slurm cluster.
 * In SchedulerParameters remove deprecated max_job_bf and replace with
   bf_max_job_test.
 * Disable sbatch, salloc, srun --reboot for non-admins.  SPANK - added support
 * for S_JOB_GID in the job script context with
   spank_get_item().
 * Prolog/Epilog - add SLURM_JOB_GID environment variable.
 configuration file changes:
 * The mpi/openmpi plugin has been removed as it does nothing.
    MpiDefault=openmpi will be translated to the functionally-equivalent
    MpiDefault=none.
 command changes (see man pages for details)
 * Display StepId=<jobid>.batch instead of StepId=<jobid>.4294967294 in output
   of "scontrol show step". (slurm_sprint_job_step_info())
 * MPMD in srun will now defer PATH resolution for the commands to launch to
   slurmstepd. Previously it would handle resolution client*side, but with
   a non*standard approach that walked PATH in reverse.
 * squeue - added "--me" option, equivalent to --user=$USER.
 * The LicensesUsed line has been removed from 'scontrol show config'.
   Please see the 'scontrol show licenses' command as an alternative.
 * sbatch - adjusted backoff times for "--wait" option to reduce load on
   slurmctld. This results in a steady*state delay of 32s between queries,
   instead of the prior 10s delay.
- Removed following deprecated patches:
  * removed patch slurmctld-rerun-agent_init-when-backup-controller-takes-over.patch
  * removed patch split-xdaemon-in-xdaemon_init-and-xdaemon_finish-for.patch
  * removed patch slurmctld-uses-xdaemon_-for-systemd.patch
  * removed patch slurmd-uses-xdaemon_-for-systemd.patch
  * removed patch slurmdbd-uses-xdaemon_-for-systemd.patch
  * removed patch slurmsmwd-uses-xdaemon_-for-systemd.patch
  * removed patch removed-deprecated-xdaemon.patch

-------------------------------------------------------------------
Wed Feb  5 15:37:05 UTC 2020 - Christian Goll <cgoll@suse.com>

- standard slurm.conf uses now also SlurmctldHost on all build 
  targets (bsc#1162377)

-------------------------------------------------------------------
Mon Jan 27 08:42:55 UTC 2020 - Egbert Eich <eich@suse.com>

- Fix a missed systemd_requires -> systemd_ordering conversion.

-------------------------------------------------------------------
Fri Jan 24 17:31:18 UTC 2020 - Egbert Eich <eich@suse.com>

- Remove special OHPC compatibility macro: these settings should
  be applied univerally.
- Add a Recommends for mariadb to slurm-slurmdbd: it is recommened
  to run the database on the same machine as the daemon.

-------------------------------------------------------------------
Fri Jan 24 11:47:58 UTC 2020 - Dominique Leuenberger <dimstar@opensuse.org>

- BuildRequire pkgconfig(systemd) instead of systemd: allow OBS to
  shortcut through the -mini flavors.
- Use systemd_ordering instead of systemd_requires: systemd is
  never a strict requirement; but in case the system is scheduled
  for installation together with systemd, we want systemd to be
  installed prior to slurm.

-------------------------------------------------------------------
Thu Jan 23 17:44:29 UTC 2020 - Christian Goll <cgoll@suse.com>

- start slurmdbd after mariadb (bsc#1161716)

-------------------------------------------------------------------
Mon Jan 13 15:41:48 UTC 2020 - Egbert Eich <eich@suse.com>

- Fix base_ver for SLE 15 SP2.

-------------------------------------------------------------------
Wed Jan  8 20:01:19 UTC 2020 - Egbert Eich <eich@suse.com>

- Update to version 19.05.5 (jsc#SLE-8491)
  * Check %docdir/NEWS for details.
  * Includes security fixes CVE-2019-19727, CVE-2019-19728,
    CVE-2019-12838.
  * Disable i586 builds as this is no longer supported.
  * Create libnss_slurm package to support user and group resolution
    thru slurmstepd.
  * slurm-2.4.4-rpath.patch -> Remove-rpath-from-build.patch
    Obsoleted:
    - pam_slurm_adopt-avoid-running-outside-of-the-sshd-PA.patch
    - pam_slurm_adopt-send_user_msg-don-t-copy-undefined-d.patch
    - pam_slurm_adopt-use-uid-to-determine-whether-root-is.patch

-------------------------------------------------------------------
Thu Jan  2 09:14:56 UTC 2020 - Egbert Eich <eich@suse.com>

- Deprecate "ControlMachine" only for SLURM version upgrades and
  products newer than 1501. This ensures that the original setting
  is retained for the SLURM version shipped origianlly with SLE-15-SP1
  or Leap 15.1.

-------------------------------------------------------------------
Sat Dec 21 09:07:42 UTC 2019 - Egbert Eich <eich@suse.com>

- Update to v18.08.9 for fixing CVE-2019-19728 (bsc#1159692).
  * Wrap END_TIMER{,2,3} macro definition in "do {} while (0)" block.
  * Make sview work with glib2 v2.62.
  * Make Slurm compile on linux after sys/sysctl.h was deprecated.
  * Install slurmdbd.conf.example with 0600 permissions to encourage secure
    use. CVE-2019-19727.
  * srun - do not continue with job launch if --uid fails. CVE-2019-19728.

-------------------------------------------------------------------
Wed Dec 11 18:23:46 UTC 2019 - Christian Goll <cgoll@suse.com>

- added pmix support jsc#SLE-10800

-------------------------------------------------------------------
Sun Dec  8 11:33:42 UTC 2019 - Egbert Eich <eich@suse.com>

- Use --with-shared-libslurm to build slurm binaries using libslurm.
- Make libslurm depend on slurm-config.

-------------------------------------------------------------------
Fri Dec  6 17:06:32 UTC 2019 - Egbert Eich <eich@suse.com>

- Fix ownership of /var/spool/slurm on new installations
  and upgrade (boo#1158696).

-------------------------------------------------------------------
Thu Oct 31 10:18:21 UTC 2019 - Egbert Eich <eich@suse.com>

- Fix permissions of slurmdbd.conf (bsc#1155784, CVE-2019-19727).
- Fix %posttrans macro _res_update to cope with added newline
  (bsc#1153259).

-------------------------------------------------------------------
Mon Oct 21 15:54:43 UTC 2019 - Egbert Eich <eich@suse.com>

- Add package slurm-webdoc which sets up a web server to provide
  the documentation for the version shipped.

-------------------------------------------------------------------
Mon Oct  7 15:39:43 UTC 2019 - Egbert Eich <eich@suse.com>

- Move srun from 'slurm' to 'slurm-node': srun is required on the
  nodes as well so sbatch will work. 'slurm-node' is a requirement
  when 'slurm' is installed (bsc#1153095).

-------------------------------------------------------------------
Wed Oct  2 08:26:02 UTC 2019 - Egbert Eich <eich@suse.com>

- Set %base_ver for SLE-15-SP2 to 18.08 (for now).

-------------------------------------------------------------------
Wed Sep 11 10:55:25 UTC 2019 - Egbert Eich <eich@suse.com>

- Edit sample configuration to deprecate "ControlMachine",
  "ControlAddr", "BackupController" and "BackupAddr" in favor
  "SlurmctldHost".

-------------------------------------------------------------------
Sat Aug 17 14:20:35 UTC 2019 - Egbert Eich <eich@suse.com>

- Fix logic of slurm-munge recommends: slurm-munge requires munge
  already, so if we have munge installed we recommend slurm-munge
  as the authentication when installing slurm or slurm-node.

-------------------------------------------------------------------
Sun Jul 14 13:28:13 UTC 2019 - Egbert Eich <eich@suse.com>

- Fix build for SLE-11-SP4 and older.

-------------------------------------------------------------------
Fri Jul 12 09:04:55 UTC 2019 - Christian Goll <cgoll@suse.com>

- added cray depend libraries to seperate package, as they are now
  built, since json is enabled

-------------------------------------------------------------------
Thu Jul 11 10:57:52 UTC 2019 - Christian Goll <cgoll@suse.com>

- Updated to 18.08.8 for fixing (CVE-2019-12838, bsc#1140709, jsc#SLE-7341,
  jsc#SLE-7342)
  * Update "xauth list" to use the same 10000ms timeout as the other xauth
    commands.
  * Fix issue in gres code to handle a gres cnt of 0.
  * Don't purge jobs if backfill is running.
  * Verify job is pending add/removing accrual time.
  * Don't abort when the job doesn't have an association that was removed
    before the job was able to make it to the database.
  * Set state_reason if select_nodes() fails job for QOS or Account.
  * Avoid seg_fault on referencing association without a valid_qos bitmap.
  * If Association/QOS is removed on a pending job set that job as ineligible.
  * When changing a jobs account/qos always make sure you remove the old limits.
  * Don't reset a FAIL_QOS or FAIL_ACCOUNT job reason until the qos or
    account changed.
  * Restore "sreport -T ALL" functionality.
  * Correctly typecast signals being sent through the api.
  * Properly initialize structures throughout Slurm.
  * Sync "numtask" squeue format option for jobs and steps to "numtasks".
  * Fix sacct -PD to avoid CA before start jobs.
  * Fix potential deadlock with backup slurmctld.
  * Fixed issue with jobs not appearing in sacct after dependency satisfied.
  * Fix showing non-eligible jobs when asking with -j and not -s.
  * Fix issue with backfill scheduler scheduling tasks of an array
    when not the head job.
  * accounting_storage/mysql - fix SIGABRT in the archive load logic.
  * accounting_storage/mysql - fix memory leak in the archive load logic.
  * Limit records per single SQL statement when loading archived data.
  * Fix unnecessary reloading of job submit plugins.
  * Allow job submit plugins to be turned on/off with a reconfigure.
  * Fix segfault when loading/unloading Lua job submit plugin multiple times.
  * Fix printing duplicate error messages of jobs rejected by job submit plugin.
  * Fix printing of job submit plugin messages of het jobs without pack id.
  * Fix memory leak in group_cache.c
  * Fix jobs stuck from FedJobLock when requeueing in a federation
  * Fix requeueing job in a federation of clusters with differing associations
  * sacctmgr - free memory before exiting in 'sacctmgr show runaway'.
  * Fix seff showing memory overflow when steps tres mem usage is 0.
  * Upon archive file name collision, create new archive file instead of
    overwriting the old one to prevent lost records.
  * Limit archive files to 50000 records per file so that archiving large
    databases will succeed.
  * Remove stray newlines in SPANK plugin error messages.
  * Fix archive loading events.
  * In select/cons_res: Only allocate 1 CPU per node with the --overcommit and
    --nodelist options.
  * Fix main scheduler from potentially not running through whole queue.
  * cons_res/job_test - prevent a job from overallocating a node memory.
  * cons_res/job_test - fix to consider a node's current allocated memory when
    testing a job's memory request.
  * Fix issue where multi-node job steps on cloud nodes wouldn't finish cleaning
    up until the end of the job (rather than the end of the step).
  * Fix issue with a 17.11 sbcast call to a 18.08 daemon.
  * Add new job bit_flags of JOB_DEPENDENT.
  * Make it so dependent jobs reset the AccrueTime and do not count against any
    AccrueTime limits.
  * Fix sacctmgr --parsable2 output for reservations and tres.
  * Prevent slurmctld from potential segfault after job_start_data() called
    for completing job.
  * Fix jobs getting on nodes with "scontrol reboot asap".
  * Record node reboot events to database.
  * Fix node reboot failure message getting to event table.
  * Don't write "(null)" to event table when no event reason exists.
  * Fix minor memory leak when clearing runaway jobs.
  * Avoid flooding slurmctld and logging when prolog complete RPC errors occur.
  * Fix GCC 9 compiler warnings.
  * Fix seff human readable memory string for values below a megabyte.
  * Fix dump/load of rejected heterogeneous jobs.
  * For heterogeneous jobs, do not count the each component against the QOS or
    association job limit multiple times.
  * slurmdbd - avoid reservation flag column corruption with the use of newer
    flags, instead preserve the older flag fields that we can still fit in the
    smallint field, and discard the rest.
  * Fix security issue in accounting_storage/mysql plugin on archive file loads
    by always escaping strings within the slurmdbd. CVE-2019-12838.

-------------------------------------------------------------------
Mon Jul  8 08:19:23 UTC 2019 - Egbert Eich <eich@suse.com>

- Fix build dependency issue around libibmad-devel introduced
  in SLE-12-SP4.

-------------------------------------------------------------------
Mon Jul  8 05:41:11 UTC 2019 - Egbert Eich <eich@suse.com>

- Add BuildRequires to address warnings during build:
  * for libcurl-devel, libssh2-devel and rrdtool-devel
  * for libjson-c-devel and liblz4-devel where available,
    disable these with --without-json and --without-lz4
    where not.
  * disable DataWarp (--without-datawarp).

-------------------------------------------------------------------
Sat Jul  6 20:07:53 UTC 2019 - Egbert Eich <eich@suse.com>

- Update SLURM to 18.08.7:
  * Set debug statement to debug2 to avoid benign error messages.
  * Add SchedulerParameters option of bf_hetjob_immediate to attempt to start
    a heterogeneous job as soon as all of its components are determined able
    to do so.
  * Fix underflow causing decay thread to exit.
  * Fix main scheduler not considering hetjobs when building the job queue.
  * Fix regression for sacct to display old jobs without a start time.
  * Fix setting correct number of gres topology bits.
  * Update hetjobs pending state reason when appropriate.
  * Fix accounting_storage/filetxt's understanding of TRES.
  * Set Accrue time when not enforcing limits.
  * Fix srun segfault when requesting a hetjob with test_exec or bcast
    options.
  * Hide multipart priorities log message behind Priority debug flag.
  * sched/backfill - Make hetjobs sensitive to bf_max_job_start.
  * Fix slurmctld segfault due to job's partition pointer NULL dereference.
  * Fix issue with OR'ed job dependencies.
  * Add new job's bit_flags of INVALID_DEPEND to prevent rebuilding a job's
    dependency string when it has at least one invalid and purged dependency.
  * Promote federation unsynced siblings log message from debug to info.
  * burst_buffer/cray - fix slurmctld SIGABRT due to illegal read/writes.
  * burst_buffer/cray - fix memory leak due to unfreed job script content.
  * node_features/knl_cray - fix script_argv use-after-free.
  * burst_buffer/cray - fix script_argv use-after-free.
  * Fix invalid reads of size 1 due to non null-terminated string reads.
  * Add extra debug2 logs to identify why BadConstraints reason is set.

-------------------------------------------------------------------
Sat Jul  6 18:05:33 UTC 2019 - Egbert Eich <eich@suse.com>

- Do not build hdf5 support where not available.

-------------------------------------------------------------------
Sat Jul  6 11:21:08 UTC 2019 - Egbert Eich <eich@suse.com>

- Add support for version updates on SLE: Update packages to a
  later version than the version supported originally on SLE
  will receive a version string in their package name.

-------------------------------------------------------------------
Wed Feb 27 11:06:10 UTC 2019 - Christian Goll <cgoll@suse.com>

- added the hdf5 job data gathering plugin

-------------------------------------------------------------------
Fri Feb  1 19:27:10 UTC 2019 - eich@suse.com

- Add backward compatibility with SLE-11 SP4

-------------------------------------------------------------------
Thu Jan 31 20:30:32 UTC 2019 - eich@suse.com

- Update to version 18.08.05-2:
  This version obsoletes:
  Fix-contrib-perlapi-to-build-with-the-fix-for-CVE-2019-6438-750cc23ed.patch
- Fix spec file for older SUSE versions.

-------------------------------------------------------------------
Thu Jan 31 09:00:06 UTC 2019 - eich@suse.com

- Update to version 18.08.05:
  * Add mitigation for a potential heap overflow on 32-bit systems in xmalloc.
    (CVE-2019-6438, bsc#1123304).
  * Other fixes:
    + Backfill - If a job has a time_limit guess the end time of a job better
      if OverTimeLimit is Unlimited.
    + Fix "sacctmgr show events event=cluster"
    + Fix sacctmgr show runawayjobs from sibling cluster
    + Avoid bit offset of -1 in call to bit_nclear().
    + Insure that "hbm" is a configured GresType on knl systems.
    + Fix NodeFeaturesPlugins=node_features/knl_generic to allow other gres
      other than knl.
    + cons_res: Prevent overflow on multiply.
    + Better debug for bad values in gres.conf.
    + Fix double accounting of energy at end of job.
    + Read gres.conf for cloud nodes on slurmctld.
    + Don't assume the first node of a job is the batch host when purging jobs
      from a node.
    + Better debugging when a job doesn't have a job_resrcs ptr.
    + Store ave watts in energy plugins.
    + Add XCC plugin for reading Lenovo Power.
    + Fix minor memory leak when scheduling rebootable nodes.
    + Fix debug2 prefix for sched log.
    + Fix printing correct SLURM_JOB_ACCOUNT_PACK_GROUP_* in env for a Het Job.
    + sbatch - search current working directory first for job script.
    + Make it so held jobs reset the AccrueTime and do not count against any
      AccrueTime limits.
    + Add SchedulerParameters option of bf_hetjob_prio=[min|avg|max] to alter
      the job sorting algorithm for scheduling heterogeneous jobs.
    + Fix initialization of assoc_mgr_locks and slurmctld_locks lock
      structures.
    + Fix segfault with job arrays using X11 forwarding.
    + Revert regression caused by e0ee1c7054 which caused negative values and
      values starting with a decimal to be invalid for PriorityWeightTRES and
      TRESBillingWeight.
    + Fix possibility to update a job's reservation to none.
    + Suppress connection errors to primary slurmdbd when backup dbd is active.
    + Suppress connection errors to primary db when backup db kicks in
    + Add missing fields for sacct --completion when using jobcomp/filetxt.
    + Fix incorrect values set for UserCPU, SystemCPU, and TotalCPU sacct
      fields when JobAcctGatherType=jobacct_gather/cgroup.
    + Fixed srun from double printing invalid option msg twice.
    + Remove unused -b flag from getopt call in sbatch.
    + Disable reporting of node TRES in sreport.
    + Re-enabling features combined by OR within parenthesis for non-knl
      setups.
    + Prevent sending duplicate requests to reboot a node before ResumeTimeout.
    + Down nodes that don't reboot by ResumeTimeout.
    + Update seff to reflect API change from rss_max to tres_usage_in_max.
    + Add missing TRES constants from perl API.
    + Fix issue where sacct would return incorrect array tasks when querying
      specific tasks.
    + Add missing variables to slurmdb_stats_t in the perlapi.
    + Fix nodes not getting reboot RPC when job requires reboot of nodes.
    + Fix failing update the partition list of a job.
    + Use slurm.conf gres ids instead of gres.conf names to get a gres type
      name.
  * Disable
    slurmctld-rerun-agent_init-when-backup-controller-takes-over.patch:
    Believed to be fixed by commit c1a537dbbe6
    See: https://bugs.schedmd.com/show_bug.cgi?id=5511
  * Add
    Fix-contrib-perlapi-to-build-with-the-fix-for-CVE-2019-6438-750cc23ed.patch:
    Fix fallout from 750cc23ed for CVE-2019-6438.

-------------------------------------------------------------------
Thu Dec 13 10:07:00 UTC 2018 - cgoll@suse.com
- Update to 18.08.04, with following highlights
  * Fix message sent to user to display preempted instead of time limit when
    a job is preempted.
  * Fix memory leak when a failure happens processing a nodes gres config.
  * Improve error message when failures happen processing a nodes gres config.
  * Don't skip jobs in scontrol hold.
  * Allow --cpu-bind=verbose to be used with SLURM_HINT environment variable.
  * Enhanced handling for runaway jobs
  * cons_res: Delay exiting cr_job_test until after cores/cpus are calculated
    and distributed.
  * Don't check existence of srun --prolog or --epilog executables when set to
    "none" and SLURM_TEST_EXEC is used.
  * Add "P" suffix support to job and step tres specifications.
  * Fix jobacct_gather/cgroup to work correctly when more than one task is
    started on a node.
  * salloc - set SLURM_NTASKS_PER_CORE and SLURM_NTASKS_PER_SOCKET in the
    environment if the corresponding command line options are used.
  * slurmd - fix handling of the -f flag to specify alternate config file
    locations.
  * Add SchedulerParameters option of bf_ignore_newly_avail_nodes to avoid
    scheduling lower priority jobs on resources that become available during
    the backfill scheduling cycle when bf_continue is enabled.
  * job_submit/lua: Add several slurmctld return codes and add user/group info
  * salloc/sbatch/srun - print warning if mutually exclusive options of --mem
    and --mem-per-cpu are both set.
 - Refreshed:
  * pam_slurm_adopt-avoid-running-outside-of-the-sshd-PA.patch

-------------------------------------------------------------------
Mon Dec 10 10:49:14 UTC 2018 - cgoll@suse.com

- restarting services on update only when activated 
- added rotation of logs
- Added backported patches which harden the pam module pam_slurm_adopt
  (BOO#1116758) which will be in slurm 19.05.x
  * added pam_slurm_adopt-avoid-running-outside-of-the-sshd-PA.patch
    [PATCH 1/3] pam_slurm_adopt: avoid running outside of the sshd PAM
  * added pam_slurm_adopt-send_user_msg-don-t-copy-undefined-d.patch
    [PATCH 2/3] pam_slurm_adopt: send_user_msg: don't copy undefined data
  * added pam_slurm_adopt-use-uid-to-determine-whether-root-is.patch
    [PATCH 3/3] pam_slurm_adopt: use uid to determine whether root is
    logging on
- package slurm-pam_slurm now depends on slurm-node and not on slurm

-------------------------------------------------------------------
Wed Dec  5 16:00:50 UTC 2018 - Christian Goll <cgoll@suse.com>

- fixed code in %pretrans section to be compatible with lua 5.1

-------------------------------------------------------------------
Tue Nov 20 11:21:37 UTC 2018 - eich@suse.com

- Added missing perl-base dependency.

-------------------------------------------------------------------
Tue Nov 20 11:21:14 UTC 2018 - eich@suse.com

- Moved HTML docs to doc package.

-------------------------------------------------------------------
Tue Nov 20 11:20:05 UTC 2018 - eich@suse.com

- Moved config man pages to a separate package: This way, they won't
  get installed on compute nodes.

-------------------------------------------------------------------
Tue Nov 20 11:11:15 UTC 2018 - eich@suse.com

- Update to 18.08.3
  * Add new burst buffer state of "teardown-fail" to indicate the burst
    buffer teardown operation is failing on specific buffers.
  * Multiple backup slurmctld daemons can be configured
  * Enable jobs with zero node count for creation and/or deletion of persistent
    burst buffers.
  * Add "scontrol show dwstat" command to display Cray burst buffer status.
  * Add "GetSysStatus" option to burst_buffer.conf file.
  * Add node and partition configuration options of "CpuBind" to control
    default task binding.
  * Add "NumaCpuBind" option to knl.conf
  * Add sbatch "--batch" option to identify features required on batch node.
  * Add "BatchFeatures" field to output of "scontrol show job".
  * Add support for "--bb" option to sbatch command.
  * Add new SystemComment field to job data structure and database.
  * Expand reservation "flags" field from 32 to 64 bits.
  * Add job state flag of "SIGNALING" to avoid race condition.
  * Properly handle srun --will-run option when there are jobs in COMPLETING
    state.
  * Properly report who is signaling a step.
  * Don't combine updated reservation records in sreport's reservation report.
  * node_features plugin - Add suport for XOR & XAND of job constraints (node
    feature specifications).
  * Improvements to how srun searches for the executible when using cwd.
  * Now programs can be checked before execution if test_exec is set.
  * Report NodeFeatures plugin configuration with scontrol and sview commands.
  * Add acct_gather_profile/influxdb plugin.
  * Add new job state of SO/STAGE_OUT
  * Correct SLURM_NTASKS and SLURM_NPROCS environment variable for
    heterogeneous job step.
  * Expand advanced reservation feature specification to support parenthesis
    and counts of nodes with specified features.
  * Defer job signaling until prolog is completed
  * Have the primary slurmctld wait until the backup has completely shutdown
    before taking control.
  * Fix issue where unpacking job state after TRES count changed could lead to
    invalid reads.
  * Heterogeneous job steps allocations supported with Open MPI.
  * Remove redundant function arguments from task plugins.
  * Add Slurm configuration file check logic using "slurmctld -t" command.
  * Add the use of a xml file to help performance when using hwloc.
  * Remove support for "ChosLoc" configuration parameter.
  * Configuration parameters "ControlMachine", "ControlAddr",
    "BackupController" and "BackupAddr" replaced by an ordered list of
    "SlurmctldHost" records.
  * Remove --immediate option from sbatch.
  * Add infrastructure for per-job and per-step TRES parameters.
  * Add DefCpuPerGpu and DefMemPerGpu to global and per-partition configuration
    parameters.
  * Add ValidateMode configuration parameter to knl_cray.conf.
  * Disable local PTY output processing when using 'srun --unbuffered'.
  * Change the column name for the %U (User ID) field in squeue to 'UID'.
  * CRAY - Add CheckGhalQuiesce to the CommunicationParameters.
  * When a process is core dumping, avoid terminating other processes in that
    task group.
  * CPU frequency management enhancements: If scaling_available_frequencies
    file is not available, then derive values from scaling_min_freq and
    scaling_max_freq values.
  * Add pending jobs count to sdiag output.
  * Add configuration paramerers SlurmctldPrimaryOnProg and
    SlurmctldPrimaryOffProg, which define programs to execute when a slurmctld
    daemon changes state.
  * Add configuration paramerers SlurmctldAddr for use with virtual IP to
    manage backup slurmctld daemons.
  * Explicitly shutdown the slurmd process when instructed to reboot.
  * Add ability to create/update partition with TRESBillingWeights through
    scontrol.
  * Calcuate TRES billing values at submission.
  * Add node_features plugin function "node_features_p_reboot_weight()".
  * Add NodeRebootWeight parameter to knl.conf configuration file.
  * Completely remove "gres" field from step record. Use "tres_per_node",
    "tres_per_socket", etc.
  * Add "Links" parameter to gres.conf configuration file.
  * Force slurm_mktime() to set tm_isdst to -1.
  * burst_buffer.conf - Add SetExecHost flag to enable burst buffer access
    from the login node for interactive jobs.
  * Append ", with requeued tasks" to job array "end" emails if any tasks in
    the array were requeued.
  * Add ResumeFailProgram slurm.conf option to specify a program that is called
    when a node fails to respond by ResumeTimeout.
  * Add new job pending reason of "ReqNodeNotAvail, reserved for maintenance".
  * Remove AdminComment += syntax from 'scontrol update job'.
  * sched/backfill: Reset job time limit if needed for deadline scheduling.
  * For heterogeneous job component with required nodes, explicitly exclude
    those nodes from all other job components.
  * Add name of partition used to output of srun --test-only output.
  * sdiag output now reports outgoing slurmctld message queue contents.
  * Improve escaping special characters on user commands when specifying paths.
  * Add salloc/sbatch/srun option of --gres-flags=disable-binding to disable
    filtering of CPUs with respect to generic resource locality.
  * SlurmDBD - Print warning if MySQL/MariaDB internal tuning is not at least
    half of the recommended values.
  * Add ability to specify a node reason when rebooting nodes with "scontrol
    reboot".
  * Add nextstate option to "scontrol reboot".
  * Consider "resuming" (nextstate=resume) nodes as available in backfill
    future scheduling.
  * Add TimelimitRaw sacct output field to display timelimit numbers.
  * Add support for sacct --whole-hetjob=[yes|no] option.
  * Make salloc handle node requests the same as sbatch.
  * Add shutdown_on_reboot SlurmdParameter to control whether the Slurmd will
    shutdown itself down or not when a reboot request is received.
  * Add cancel_reboot scontrol option to cancel pending reboot of nodes.
  * Make Users case insensitive in the database based on
    Parameters=PreserveCaseUser in the slurmdbd.conf.
  * Improve scheduling when dealing with node_features that could have a
    boot delay.
  * Changed the default AuthType for slurmdbd to auth/munge.
  * Added 'remote-fs.target' to After directive of slurmd.service file.
  * Remove drain on node when reboot nextstate used.
  * Speed up pack of job's qos.
  * Add sacctmgr options to prevent/manage job queue stuffing:
    - GrpJobsAccrue=<max_jobs>
    - MaxJobsAccrue=<max_jobs>
  * MinPrioThreshold
    Minimum priority required to reserve resources when scheduling.
  * Add control_inx value to trigger_info_msg_t to permit future work in the
    trigger management code to distinguish which of multiple backup controllers
    has changed state.
  * NOTES:
    PreemptType=preempt/job_prio has been removed - use PreemptType=preempt/qos
    instead.
  * Bluegene support was deprecated has now been removed
  * cgroup_allowed_devices_file.conf was removed. It was never used by
    default, as ConstrainDevices was not set. If needed, refer to the
    cgroups.conf man page on how to create one.
  * slurm.epilog.clean: Removed. User should use pam_slurm_adopt instead.
- Refreshed:
  * removed-deprecated-xdaemon.patch
  * slurmctld-uses-xdaemon_-for-systemd.patch
  * slurmd-uses-xdaemon_-for-systemd.patch
  * slurmdbd-uses-xdaemon_-for-systemd.patch
  * slurmsmwd-uses-xdaemon_-for-systemd.patch
  * slurmctld-rerun-agent_init-when-backup-controller-takes-over.patch

-------------------------------------------------------------------
Sun Sep 30 15:18:08 UTC 2018 - eich@suse.com

- Move config man-pages to config package.

-------------------------------------------------------------------
Mon Sep 24 09:25:57 UTC 2018 - cgoll@suse.com

- added correct link flags for perl bindings (bsc#1108671)
  * added correct linker search path in slurm-2.4.4-rpath.patch
  * perl:Switch is required by slurm torque wrappers

-------------------------------------------------------------------
Sat Sep 22 06:09:18 UTC 2018 - eich@suse.com

- Fix Requires(pre) and Requires(post) for slurm-config and slurm-node.
  This fixes issues with failing slurm user creation when installed
  during initial system installation (bsc#1109373).

-------------------------------------------------------------------
Tue Aug 14 10:26:43 UTC 2018 - eich@suse.com

- Update to 17.11.9
  * Fix segfault in slurmctld when a job's node bitmap is NULL during a
    scheduling cycle.  Primarily caused by EnforcePartLimits=ALL.
  * Remove erroneous unlock in acct_gather_energy/ipmi.
  * Enable support for hwloc version 2.0.1.
  * Fix 'srun -q' (--qos) option handling.
  * Fix socket communication issue that can lead to lost task completition
    messages, which will cause a permanently stuck srun process.
  * Handle creation of TMPDIR if environment variable is set or changed in
    a task prolog script.
  * Avoid node layout fragmentation if running with a fixed CPU count but
    without Sockets and CoresPerSocket defined.
  * burst_buffer/cray - Fix datawarp swap default pool overriding jobdw.
  * Fix incorrect job priority assignment for multi-partition job with
    different PriorityTier settings on the partitions.
  * Fix sinfo to print correct node state.

-------------------------------------------------------------------
Thu Aug  2 11:35:55 UTC 2018 - eich@suse.com

- When using a remote shared StateSaveLocation, slurmctld needs to
  be started after remote filesystems have become available.
  Add 'remote-fs.target' to the 'After=' directive in slurmctld.service
  (boo#1103561).

-------------------------------------------------------------------
Tue Jul 31 18:29:40 UTC 2018 - eich@suse.com

- Update to 17.11.8
  * Fix incomplete RESPONSE_[RESOURCE|JOB_PACK]_ALLOCATION building path.
  * Do not allocate nodes that were marked down due to the node not responding
    by ResumeTimeout.
  * task/cray plugin - search for "mems" cgroup information in the file
    "cpuset.mems" then fall back to the file "mems".
  * Fix ipmi profile debug uninitialized variable.
  * PMIx: fixed the direct connect inline msg sending.
  * MYSQL: Fix issue not handling all fields when loading an archive dump.
  * Allow a job_submit plugin to change the admin_comment field during
    job_submit_plugin_modify().
  * job_submit/lua - fix access into reservation table.
  * MySQL - Prevent deadlock caused by archive logic locking reads.
  * Don't enforce MaxQueryTimeRange when requesting specific jobs.
  * Modify --test-only logic to properly support jobs submitted to more than
    one partition.
  * Prevent slurmctld from abort when attempting to set non-existing
    qos as def_qos_id.
  * Add new job dependency type of "afterburstbuffer". The pending job will be
    delayed until the first job completes execution and it's burst buffer
    stage-out is completed.
  * Reorder proctrack/task plugin load in the slurmstepd to match that of
    slurmd
    and avoid race condition calling task before proctrack can introduce.
  * Prevent reboot of a busy KNL node when requesting inactive features.
  * Revert to previous behavior when requesting memory per cpu/node introduced
    in 17.11.7.
  * Fix to reinitialize previously adjusted job members to their original
    value
    when validating the job memory in multi-partition requests.
  * Fix _step_signal() from always returning SLURM_SUCCESS.
  * Combine active and available node feature change logs on one line rather
    than one line per node for performance reasons.
  * Prevent occasionally leaking freezer cgroups.
  * Fix potential segfault when closing the mpi/pmi2 plugin.
  * Fix issues with  --exclusive=[user|mcs] to work correctly
    with preemption or when job requests a specific list of hosts.
  * Make code compile with hdf5 1.10.2+
  * mpi/pmix: Fixed the collectives canceling.
  * SlurmDBD: improve error message handling on archive load failure.
  * Fix incorrect locking when deleting reservations.
  * Fix incorrect locking when setting up the power save module.
  * Fix setting format output length for squeue when showing array jobs.
  * Add xstrstr function.
  * Fix printing out of --hint options in sbatch, salloc --help.
  * Prevent possible divide by zero in _validate_time_limit().
  * Add Delegate=yes to the slurmd.service file to prevent systemd from
    interfering with the jobs' cgroup hierarchies.
  * Change the backlog argument to the listen() syscall within srun to 4096
    to match elsewhere in the code, and avoid communication problems at scale.

-------------------------------------------------------------------
Tue Jul 31 17:30:08 UTC 2018 - eich@suse.com

- slurmctld-rerun-agent_init-when-backup-controller-takes-over.patch:
  Fix race in the slurmctld backup controller which prevents it
  to clean up allocations on nodes properly after failing over
  (bsc#1084917).
- Handled %license in a backward compatible manner.

-------------------------------------------------------------------
Sat Jul 28 15:30:58 UTC 2018 - eich@suse.com

- Add a 'Recommends: slurm-munge' to slurm-slurmdbd.

-------------------------------------------------------------------
Wed Jul 11 12:04:55 UTC 2018 - eich@suse.com

- Shield comments between script snippets with a %{!?nil:...} to
  avoid them being interpreted as scripts - in which case the update
  level is passed as argument (see chapter 'Shared libraries' in:
  https://en.opensuse.org/openSUSE:Packaging_scriptlet_snippets)
  (bsc#1100850).

-------------------------------------------------------------------
Tue Jun  5 13:24:43 UTC 2018 - cgoll@suse.com

- Update from 17.11.5 to 17.11.7
- Fix security issue in handling of username and gid fields
  CVE-2018-10995 and bsc#1095508 what implied an 
  update from 17.11.5 to 17.11.7
  Highlights of 17.11.6:
  * CRAY - Add slurmsmwd to the contribs/cray dir
  * PMIX - Added the direct connect authentication.
  * Prevent the backup slurmctld from losing the active/available node
    features list on takeover.
  * Be able to force power_down of cloud node even if in power_save state.
  * Allow cloud nodes to be recognized in Slurm when booted out of band.
  * Numerous fixes - check 'NEWS' file.
  Highlights of 17.11.7:
  * Notify srun and ctld when unkillable stepd exits.
  * Numerous fixes - check 'NEWS' file.
- Add: slurmsmwd-uses-xdaemon_-for-systemd.patch
  * Fixes daemoniziation in newly introduced slurmsmwd daemon.
- Rename:
  split-xdaemon-in-xdaemon_init-and-xdaemon_finish-for-systemd-compatibilty.patch
  to split-xdaemon-in-xdaemon_init-and-xdaemon_finish-for.patch
  * remain in sync with commit messages which introduced that file

-------------------------------------------------------------------
Thu Apr 19 21:05:04 UTC 2018 - eich@suse.com

- Avoid running pretrans scripts when running in an instsys:
  there may be not much installed, yet. pretrans code should
  be done in lua, this way, it will be executed by the rpm-internal
  lua interpreter and not be passed to a shell which may not be
  around at the time this scriptlet is run (bsc#1090292).

-------------------------------------------------------------------
Fri Apr 13 10:03:05 UTC 2018 - eich@suse.com

- Add requires for slurm-sql to the slurmdbd package.

-------------------------------------------------------------------
Thu Apr 12 17:20:03 UTC 2018 - eich@suse.com

- Package READMEs for pam and pam_slurm_adopt.
- Use the new %%license directive for COPYING file.

-------------------------------------------------------------------
Thu Apr 12 16:40:44 UTC 2018 - eich@suse.com

- Add:
  * split-xdaemon-in-xdaemon_init-and-xdaemon_finish-for-systemd-compatibilty.patch
  * slurmctld-uses-xdaemon_-for-systemd.patch
  * slurmd-uses-xdaemon_-for-systemd.patch
  * slurmdbd-uses-xdaemon_-for-systemd.patch
  * removed-deprecated-xdaemon.patch
  Fix interaction with systemd: systemd expects that a 
  daemonizing process doesn't go away until the PID file
  with it PID of the daemon has bee written (bsc#1084125).

-------------------------------------------------------------------
Wed Apr 11 11:27:31 UTC 2018 - eich@suse.com

- Make sure systemd services get restarted only when all
  packages are in a consistent state, not in the middle
  of an 'update' transaction (bsc#1088693).
  Since the %postun scripts that run on update are from
  the old package they cannot be changed - thus we work
  around the restart breakage.

-------------------------------------------------------------------
Fri Mar 23 13:50:14 UTC 2018 - cgoll@suse.com

- fixed wrong log file location in slurmdbd.conf and 
  fixed pid location for slurmdbd and made slurm-slurmdbd
  depend on slurm config which provides the dir /var/run/slurm
  (bsc#1086859).

-------------------------------------------------------------------
Fri Mar 16 08:57:20 UTC 2018 - cgoll@suse.com

- added comment for (bsc#1085606)

-------------------------------------------------------------------
Wed Mar 14 19:34:58 UTC 2018 - eich@suse.com

- Fix security issue in accounting_storage/mysql plugin by always escaping
  strings within the slurmdbd. CVE-2018-7033
  http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2018-7033
  (bsc#1085240).
- Update slurm to v17.11.5 (FATE#325451)
  Highlights of 17.11:
  * Support for federated clusters to manage a single work-flow 
    across a set of clusters.
  * Support for heterogeneous job allocations (various processor types,
    memory sizes, etc. by job component). Support for heterogeneous job
    steps within a single MPI_COMM_WORLD is not yet supported for most
    configurations.
  * X11 support is now fully integrated with the main Slurm code. Remove
    any X11 plugin configured in your plugstack.conf file to avoid errors
    being logged about conflicting options.
  * Added new advanced reservation flag of "flex", which permits jobs
    requesting the reservation to begin prior to the reservation's 
    start time and use resources inside or outside of the reservation.
    A typical use case is to prevent jobs not explicitly requesting the
    reservation from using those reserved resources rather than forcing
    jobs requesting the reservation to use those resources in the time
    frame reserved.
  * The sprio command has been modified to report a job's priority
    information for every partition the job has been submitted to.
  * Group ID lookup performed at job submit time to avoid lookup on
    all compute nodes. Enable with PrologFlags=SendGIDs configuration
    parameter.
  * Slurm commands and daemons dynamically link to libslurmfull.so
    instead of statically linking. This dramatically reduces the
    footprint of Slurm.
  * In switch plugin, added plugin_id symbol to plugins and wrapped
    switch_jobinfo_t with dynamic_plugin_data_t in interface calls
    in order to pass switch information between clusters with different
    switch types.
  * Changed default ProctrackType to cgroup.
  * Changed default sched_min_interval from 0 to 2 microseconds.
  * Added new 'scontrol write batch_script ' command to fetch a job's
    batch script. Removed the ability to see the script as part of the 
    'scontrol -dd   show job' command.
  * Add new "billing" TRES which allows jobs to be limited based on the
    job's billable TRES calculated by the job's partition's
    TRESBillingWeights.
  * Regular user use of "scontrol top" command is now disabled. Use the
    configuration parameter "SchedulerParameters=enable_user_top" to
    enable that functionality. The configuration parameter
    "SchedulerParameters=disable_user_top" will be silently ignored.
  * Change default to let pending jobs run outside of reservation after
    reservation is gone to put jobs in held state. Added 
    NO_HOLD_JOBS_AFTER_END reservation flag to use old default.
    Support for PMIx v2.0 as well as UCX support.
  * Remove plugins for obsolete MPI stacks:
    - lam
    - mpich1_p4
    - mpich1_shmem
    - mvapich
  * Numerous fixes - check 'NEWS' file.
- slurmd-Fix-slurmd-for-new-API-in-hwloc-2.0.patch
  plugins-cgroup-Fix-slurmd-for-new-API-in-hwloc-2.0.patch:
  Removed. Code upstream.
- slurmctld-service-var-run-path.patch:
  Replaced by sed script.
- Fix some rpmlint warnings.

-------------------------------------------------------------------
Mon Jan 29 13:43:57 UTC 2018 - cgoll@suse.com

- moved config files to slurm-config package (FATE#324574).

-------------------------------------------------------------------
Mon Jan 29 04:01:28 UTC 2018 - jjolly@suse.com

- Moved slurmstepd and man page into slurm-node due to slurmd dependency
- Moved config files into slurm-node
- Moved slurmd rc scripts into slurm-node
- Made slurm-munge require slurm-plugins instead of slurm itself
  - slurm-node suggested slurm-munge, causing the whole slurm to be
    installed. The slurm-plugins seems to be a more base class
    (FATE#324574).

-------------------------------------------------------------------
Wed Jan 17 14:21:49 UTC 2018 - cgoll@suse.com

- split up light wight slurm-node package for deployment on nodes
  (FATE#324574).

-------------------------------------------------------------------
Fri Dec  1 16:04:55 UTC 2017 - cgoll@suse.com

- added /var/spool/ directory and removed duplicated entries from slurm.conf

-------------------------------------------------------------------
Fri Nov 10 13:52:30 UTC 2017 - eich@suse.com

- Package so-versioned libs separately. libslurm is expected
  to change more frequently and thus is packaged separately
  from libpmi.

-------------------------------------------------------------------
Wed Nov  1 16:15:04 UTC 2017 - eich@suse.com

- Updated to 17.02.9 to fix CVE-2017-15566 (bsc#1065697).
   Changes in 17.0.9
   * When resuming powered down nodes, mark DOWN nodes right after
     ResumeTimeout
    has been reached (previous logic would wait about one minute longer).
   * Fix sreport not showing full column name for TRES Count.
   * Fix slurmdb_reservations_get() giving wrong usage data when job's spanned
     reservation that was modified.
   * Fix sreport reservation utilization report showing bad data.
   * Show all TRES' on a reservation in sreport reservation utilization report
     by default.
   * Fix sacctmgr show reservation handling "end" parameter.
   * Work around issue with sysmacros.h and gcc7 / glibc 2.25.
   * Fix layouts code to only allow setting a boolean.
   * Fix sbatch --wait to keep waiting even if a message timeout occurs.
   * CRAY - If configured with NodeFeatures=knl_cray and there are non-KNL
     nodes which include no features the slurmctld will abort without
     this patch when attemping strtok_r(NULL).
   * Fix regression in 17.02.7 which would run the spank_task_privileged as
     part of the slurmstepd instead of it's child process.
   * Fix security issue in Prolog and Epilog by always prepending SPANK_ to
     all user-set environment variables. CVE-2017-15566.
   Changes in 17.0.8:
   * Add 'slurmdbd:' to the accounting plugin to notify message is from dbd
    instead of local.
   * mpi/mvapich - Buffer being only partially cleared. No failures observed.
   * Fix for job  --switch option on dragonfly network.
   * In salloc with  --uid option, drop supplementary groups before changing UID.
   * jobcomp/elasticsearch - strip any trailing slashes from JobCompLoc.
   * jobcomp/elasticsearch - fix memory leak when transferring generated buffer.
   * Prevent slurmstepd ABRT when parsing gres.conf CPUs.
   * Fix sbatch --signal to signal all MPI ranks in a step instead of just those
     on node 0.
   * Check multiple partition limits when scheduling a job that were previously
     only checked on submit.
   * Cray: Avoid running application/step Node Health Check on the external
     job step.
   * Optimization enhancements for partition based job preemption.
   * Address some build warnings from GCC 7.1, and one possible memory leak if
     /proc is inaccessible.
   * If creating/altering a core based reservation with scontrol/sview on a
     remote cluster correctly determine the select type.
   * Fix autoconf test for libcurl when clang is used.
   * Fix default location for cgroup_allowed_devices_file.conf to use correct
     default path.
   * Document NewName option to sacctmgr.
   * Reject a second PMI2_Init call within a single step to prevent slurmstepd
     from hanging.
   * Handle old 32bit values stored in the database for requested memory
     correctly in sacct.
   * Fix memory leaks in the task/cgroup plugin when constraining devices.
   * Make extremely verbose info messages debug2 messages in the task/cgroup
     plugin when constraining devices.
   * Fix issue that would deny the stepd access to /dev/null where GRES has a
    'type' but no file defined.
   * Fix issue where the slurmstepd would fatal on job launch if you have no
     gres listed in your slurm.conf but some in gres.conf.
   * Fix validating time spec to correctly validate various time formats.
   * Make scontrol work correctly with job update timelimit [+|-]=.
   * Reduce the visibily of a number of warnings in _part_access_check.
   * Prevent segfault in sacctmgr if no association name is specified for
     an update command.
   * burst_buffer/cray plugin modified to work with changes in Cray UP05
     software release.
   * Fix job reasons for jobs that are violating assoc MaxTRESPerNode limits.
   * Fix segfault when unpacking a 16.05 slurm_cred in a 17.02 daemon.
   * Fix setting TRES limits with case insensitive TRES names.
   * Add alias for xstrncmp() -- slurm_xstrncmp().
   * Fix sorting of case insensitive strings when using xstrcasecmp().
   * Gracefully handle race condition when reading /proc as process exits.
   * Avoid error on Cray duplicate setup of core specialization.
   * Skip over undefined (hidden in Slurm) nodes in pbsnodes.
   * Add empty hashes in perl api's slurm_load_node() for hidden nodes.
   * CRAY - Add rpath logic to work for the alpscomm libs.
   * Fixes for administrator extended TimeLimit (job reason & time limit reset).
   * Fix gres selection on systems running select/linear.
   * sview: Added window decorator for maximize,minimize,close buttons for all
     systems.
   * squeue: interpret negative length format specifiers as a request to
     delimit values with spaces.
   * Fix the torque pbsnodes wrapper script to parse a gres field with a type
     set correctly.
- Fixed ABI version of libslurm.

-------------------------------------------------------------------
Fri Oct  6 13:53:08 UTC 2017 - jengelh@inai.de

- Trim redundant wording in descriptions.

-------------------------------------------------------------------
Wed Sep 27 11:08:29 UTC 2017 - jjolly@suse.com

- Updated to slurm 17-02-7-1
  * Added python as BuildRequires
  * Removed sched-wiki package
  * Removed slurmdb-direct package
  * Obsoleted sched-wiki and slurmdb-direct packages
  * Removing Cray-specific files
  * Added /etc/slurm/layout.d files (new for this version)
  * Remove /etc/slurm/cgroup files from package
  * Added lib/slurm/mcs_account.so
  * Removed lib/slurm/jobacct_gather_aix.so
  * Removed lib/slurm/job_submit_cnode.so
- Created slurm-sql package
- Moved files from slurm-plugins to slurm-torque package
- Moved creation of /usr/lib/tmpfiles.d/slurm.conf into slurm.spec
  * Removed tmpfiles.d-slurm.conf
- Changed /var/run path for slurm daemons to /var/run/slurm
  * Added slurmctld-service-var-run-path.patch
  (FATE#324026).

-------------------------------------------------------------------
Tue Sep 12 16:00:11 UTC 2017 - jjolly@suse.com

- Made tmpfiles_create post-install macro SLE12 SP2 or greater
- Directly calling systemd-tmpfiles --create for before SLE12 SP2

-------------------------------------------------------------------
Mon Jul 10 03:35:41 UTC 2017 - jjolly@suse.com

- Allows OpenSUSE Factory build as well
- Removes unused .service files from project
- Adds /var/run/slurm to /usr/lib/tmpfiles.d for boottime creation
  * Patches upstream .service files to allow for /var/run/slurm path
  * Modifies slurm.conf to allow for /var/run/slurm path

-------------------------------------------------------------------
Tue May 30 10:24:09 UTC 2017 - eich@suse.com

- Move wrapper script mpiexec provided by slrum-torque to
  mpiexec.slurm to avoid conflicts. This file is normally
  provided by the MPI implementation (boo#1041706).

-------------------------------------------------------------------
Mon May  8 10:10:04 UTC 2017 - eich@suse.com

- Replace remaining ${RPM_BUILD_ROOT}s.
- Improve description.
- Fix up changelog.

-------------------------------------------------------------------
Fri Mar 31 12:43:25 UTC 2017 - eich@suse.com
- Spec file: Replace "Requires : slurm-perlapi" by
  "Requires: perl-slurm = %{version}" (boo#1031872).

-------------------------------------------------------------------
Thu Feb 16 12:12:45 UTC 2017 - jengelh@inai.de

- Trim redundant parts of description. Fixup RPM groups.
- Replace unnecessary %__ macro indirections;
  replace historic $RPM_* variables by macros.

-------------------------------------------------------------------
Wed Feb 15 18:55:28 UTC 2017 - eich@suse.com

- slurmd-Fix-for-newer-API-versions.patch:
  Stale patch removed.

-------------------------------------------------------------------
Tue Feb  7 16:47:17 UTC 2017 - eich@suse.com

- Use %slurm_u and %slurm_g macros defined at the beginning of the spec
  file when adding the slurm user/group for consistency.
- Define these macros to daemon,root for non-systemd.
- For anything newer than Leap 42.1 or SLE-12-SP1 build OpenHPC compatible.

-------------------------------------------------------------------
Wed Feb  1 20:17:47 UTC 2017 - eich@suse.com

- Updated to 16.05.8.1
 * Remove StoragePass from being printed out in the slurmdbd log at debug2
   level.
 * Defer PATH search for task program until launch in slurmstepd.
 * Modify regression test1.89 to avoid leaving vestigial job. Also reduce
    logging to reduce likelyhood of Expect buffer overflow.
 * Do not PATH search for mult-prog launches if LaunchParamters=test_exec is
    enabled.
 * Fix for possible infinite loop in select/cons_res plugin when trying to
    satisfy a job's ntasks_per_core or socket specification.
 * If job is held for bad constraints make it so once updated the job doesn't
    go into JobAdminHeld.
 * sched/backfill - Fix logic to reserve resources for jobs that require a
    node reboot (i.e. to change KNL mode) in order to start.
 * When unpacking a node or front_end record from state and the protocol
    version is lower than the min version, set it to the min.
 * Remove redundant lookup for part_ptr when updating a reservation's nodes.
 * Fix memory and file descriptor leaks in slurmd daemon's sbcast logic.
 * Do not allocate specialized cores to jobs using the --exclusive option.
 * Cancel interactive job if Prolog failure with "PrologFlags=contain" or
   "PrologFlags=alloc" configured. Send new error prolog failure message to
   the salloc or srun command as needed.
 * Prevent possible out-of-bounds read in slurmstepd on an invalid #! line.
 * Fix check for PluginDir within slurmctld to work with multiple directories.
 * Cancel interactive jobs automatically on communication error to launching
   srun/salloc process.
 * Fix security issue caused by insecure file path handling triggered by the
   failure of a Prolog script. To exploit this a user needs to anticipate or
   cause the Prolog to fail for their job. CVE-2016-10030 (bsc#1018371).
- Replace group/user add macros with function calls.
- Fix array initialzation and ensure strings are always NULL terminated in
-  pam_slurm.c (bsc#1007053).
- Disable building with netloc support: the netloc API is part of the devel
  branch of hwloc. Since this devel branch was included accidentally and has
  been reversed since, we need to disable this for the time being.
- Conditionalized architecture specific pieces to support non-x86 architectures
  better.

-------------------------------------------------------------------
Tue Jan  3 17:21:58 UTC 2017 - eich@suse.com

- Remove: unneeded 'BuildRequires:  python'
- Add:
  BuildRequires:  freeipmi-devel
  BuildRequires:  libibmad-devel
  BuildRequires:  libibumad-devel
  so they are picked up by the slurm build.
- Enable modifications from openHPC Project.
- Enable lua API package build.
- Add a recommends for slurm-munge to the slurm package:
  This is way, the munge auth method is available and slurm
  works out of the box.
- Create /var/lib/slurm as StateSaveLocation directory.
  /tmp is dangerous.

-------------------------------------------------------------------
Fri Dec  2 19:39:56 UTC 2016 - eich@suse.com

- Create slurm user/group in preinstall script.

-------------------------------------------------------------------
Wed Nov 30 15:16:05 UTC 2016 - eich@suse.com

- Keep %{_libdir}/libpmi* and %{_libdir}/mpi_pmi2* on SUSE.

-------------------------------------------------------------------
Tue Nov 22 21:42:04 UTC 2016 - eich@suse.com

- Fix build with and without OHCP_BUILD define.
- Fix build for systemd and non-systemd.

-------------------------------------------------------------------
Fri Nov  4 20:15:47 UTC 2016 - eich@suse.com

- Updated to 16-05-5 - equvalent to OpenHPC 1.2.
  * Fix issue with resizing jobs and limits not be kept track of correctly.
  * BGQ - Remove redeclaration of job_read_lock.
  * BGQ - Tighter locks around structures when nodes/cables change state.
  * Make it possible to change CPUsPerTask with scontrol.
  * Make it so scontrol update part qos= will take away a partition QOS from
    a partition.
  * Backfill scheduling properly synchronized with Cray Node Health Check.
    Prior logic could result in highest priority job getting improperly
    postponed.
  * Make it so daemons also support TopologyParam=NoInAddrAny.
  * If scancel is operating on large number of jobs and RPC responses from
    slurmctld daemon are slow then introduce a delay in sending the cancel job
    requests from scancel in order to reduce load on slurmctld.
  * Remove redundant logic when updating a job's task count.
  * MySQL - Fix querying jobs with reservations when the id's have rolled.
  * Perl - Fix use of uninitialized variable in slurm_job_step_get_pids.
  * Launch batch job requsting --reboot after the boot completes.
  * Do not attempt to power down a node which has never responded if the
    slurmctld daemon restarts without state.
  * Fix for possible slurmstepd segfault on invalid user ID.
  * MySQL - Fix for possible race condition when archiving multiple clusters
    at the same time.
  * Add logic so that slurmstepd can be launched under valgrind.
  * Increase buffer size to read /proc/*/stat files.
  * Remove the SchedulerParameters option of "assoc_limit_continue", making it
    the default value. Add option of "assoc_limit_stop". If "assoc_limit_stop"
    is set and a job cannot start due to association limits, then do not attempt
    to initiate any lower priority jobs in that partition. Setting this can
    decrease system throughput and utlization, but avoid potentially starving
    larger jobs by preventing them from launching indefinitely.
  * Update a node's socket and cores per socket counts as needed after a node
    boot to reflect configuration changes which can occur on KNL processors.
    Note that the node's total core count must not change, only the distribution
    of cores across varying socket counts (KNL NUMA nodes treated as sockets by
    Slurm).
  * Rename partition configuration from "Shared" to "OverSubscribe". Rename
    salloc, sbatch, srun option from "--shared" to "--oversubscribe". The old
    options will continue to function. Output field names also changed in
    scontrol, sinfo, squeue and sview.
  * Add SLURM_UMASK environment variable to user job.
  * knl_conf: Added new configuration parameter of CapmcPollFreq.
  * Cleanup two minor Coverity warnings.
  * Make it so the tres units in a job's formatted string are converted like
    they are in a step.
  * Correct partition's MaxCPUsPerNode enforcement when nodes are shared by
    multiple partitions.
  * node_feature/knl_cray - Prevent slurmctld GRES errors for "hbm" references.
  * Display thread name instead of thread id and remove process name in stderr
    logging for "thread_id" LogTimeFormat.
  * Log IP address of bad incomming message to slurmctld.
  * If a user requests tasks, nodes and ntasks-per-node and
    tasks-per-node/nodes != tasks print warning and ignore ntasks-per-node.
  * Release CPU "owner" file locks.
  * Update seff to fix warnings with ncpus, and list slurm-perlapi dependency
    in spec file.
  * Allow QOS timelimit to override partition timelimit when EnforcePartLimits
    is set to all/any.
  * Make it so qsub will do a "basename" on a wrapped command for the output
    and error files.
  * Add logic so that slurmstepd can be launched under valgrind.
  * Increase buffer size to read /proc/*/stat files.
  * Prevent job stuck in configuring state if slurmctld daemon restarted while
    PrologSlurmctld is running. Also re-issue burst_buffer/pre-load operation
    as needed.
  * Move test for job wait reason value of BurstBufferResources and
    BurstBufferStageIn later in the scheduling logic.
  * Document which srun options apply to only job, only step, or job and step
    allocations.
  * Use more compatible function to get thread name (>= 2.6.11).
  * Make it so the extern step uses a reverse tree when cleaning up.
  * If extern step doesn't get added into the proctrack plugin make sure the
    sleep is killed.
  * Add web links to Slurm Diamond Collectors (from Harvard University) and
    collectd (from EDF).
  * Add job_submit plugin for the "reboot" field.
  * Make some more Slurm constants (INFINITE, NO_VAL64, etc.) available to
    job_submit/lua plugins.
  * Send in a -1 for a taskid into spank_task_post_fork for the extern_step.
  * MYSQL - Sightly better logic if a job completion comes in with an end time
    of 0.
  * task/cgroup plugin is configured with ConstrainRAMSpace=yes, then set soft
    memory limit to allocated memory limit (previously no soft limit was set).
  * Streamline when schedule() is called when running with message aggregation
    on batch script completes.
  * Fix incorrect casting when [un]packing derived_ec on slurmdb_job_rec_t.
  * Document that persistent burst buffers can not be created or destroyed using
    the salloc or srun --bb options.
  * Add support for setting the SLURM_JOB_ACCOUNT, SLURM_JOB_QOS and
    SLURM_JOB_RESERVAION environment variables are set for the salloc command.
    Document the same environment variables for the salloc, sbatch and srun
    commands in their man pages.
  * Fix issue where sacctmgr load cluster.cfg wouldn't load associations
    that had a partition in them.
  * Don't return the extern step from sstat by default.
  * In sstat print 'extern' instead of 4294967295 for the extern step.
  * Make advanced reservations work properly with core specialization.
  * slurmstepd modified to pre-load all relevant plugins at startup to avoid
    the possibility of modified plugins later resulting in inconsistent API
    or data structures and a failure of slurmstepd.
  * Export functions from parse_time.c in libslurm.so.
  * Export unit convert functions from slurm_protocol_api.c in libslurm.so.
  * Fix scancel to allow multiple steps from a job to be cancelled at once.
  * Update and expand upgrade guide (in Quick Start Administrator web page).
  * burst_buffer/cray: Requeue, but do not hold a job which fails the pre_run
    operation.
  * Insure reported expected job start time is not in the past for pending jobs.
  * Add support for PMIx v2.

Required for FATE#316379.

-------------------------------------------------------------------
Mon Oct 17 13:25:52 UTC 2016 - eich@suse.com

- Setting 'download_files' service to mode='localonly'
  and adding source tarball. (Required for Factory).

-------------------------------------------------------------------
Sat Oct 15 18:11:39 UTC 2016 - eich@suse.com

- version 15.08.7.1
  * Remove the 1024-character limit on lines in batch scripts.
    task/affinity: Disable core-level task binding if more CPUs required than
    available cores.
  * Preemption/gang scheduling: If a job is suspended at slurmctld restart or
    reconfiguration time, then leave it suspended rather than resume+suspend.
  * Don't use lower weight nodes for job allocation when topology/tree used.
  * Don't allow user specified reservation names to disrupt the normal
    reservation sequeuece numbering scheme.
  * Avoid hard-link/copy of script/environment files for job arrays. Use the
    master job record file for all tasks of the job array.
    NOTE: Job arrays submitted to Slurm version 15.08.6 or later will fail if
    the slurmctld daemon is downgraded to an earlier version of Slurm.
  * In slurmctld log file, log duplicate job ID found by slurmd. Previously was
    being logged as prolog/epilog failure.
  * If a job is requeued while in the process of being launch, remove it's
    job ID from slurmd's record of active jobs in order to avoid generating a
    duplicate job ID error when launched for the second time (which would
    drain the node).
  * Cleanup messages when handling job script and environment variables in
    older directory structure formats.
  * Prevent triggering gang scheduling within a partition if configured with
    PreemptType=partition_prio and PreemptMode=suspend,gang.
  * Decrease parallelism in job cancel request to prevent denial of service
    when cancelling huge numbers of jobs.
  * If all ephemeral ports are in use, try using other port numbers.
  * Prevent "scontrol update job" from updating jobs that have already finished.
  * Show requested TRES in "squeue -O tres" when job is pending.
  * Backfill scheduler: Test association and QOS node limits before reserving
    resources for pending job.
  * Many bug fixes.
- Use source services to download package.
- Fix code for new API of hwloc-2.0.
- package netloc_to_topology where avialable.
- Package documentation.

-------------------------------------------------------------------
Sun Nov  1 13:45:52 UTC 2015 - scorot@free.fr

- version 15.08.3
  * Many new features and bug fixes. See NEWS file 
- update files list accordingly
- fix wrong end of line in some files

-------------------------------------------------------------------
Thu Aug  6 19:06:18 UTC 2015 - scorot@free.fr

- version 14.11.8
  * Many bug fixes. See NEWS file 
- update files list accordingly

-------------------------------------------------------------------
Sun Nov  2 22:12:34 UTC 2014 - scorot@free.fr

- add missing systemd requirements 
- add missing rclink

-------------------------------------------------------------------
Sun Nov  2 15:04:42 UTC 2014 - scorot@free.fr

- version 14.03.9
  * Many bug fixes. See NEWS file
- add systemd support

-------------------------------------------------------------------
Sat Jul 26 10:22:32 UTC 2014 - scorot@free.fr

- version 14.03.6
  * Added support for native Slurm operation on Cray systems
    (without ALPS).
  * Added partition configuration parameters AllowAccounts,
    AllowQOS, DenyAccounts and DenyQOS to provide greater control
    over use.
  * Added the ability to perform load based scheduling. Allocating
    resources to jobs on the nodes with the largest number if idle
    CPUs.
  * Added support for reserving cores on a compute node for system
    services (core specialization)
  * Add mechanism for job_submit plugin to generate error message
    for srun, salloc or sbatch to stderr.
  * Support for Postgres database has long since been out of date
    and problematic, so it has been removed entirely.  If you
    would like to use it the code still exists in <= 2.6, but will
    not be included in this and future versions of the code.
  * Added new structures and support for both server and cluster
    resources.
  * Significant performance improvements, especially with respect
    to job array support. 
- update files list

-------------------------------------------------------------------
Sun Mar 16 15:59:01 UTC 2014 - scorot@free.fr

- update to version 2.6.7
  * Support for job arrays, which increases performance and ease of
    use for sets of similar jobs.
  * Job profiling capability added to record a wide variety of job
    characteristics for each task on a user configurable periodic
    basis. Data currently available includes CPU use, memory use,
    energy use, Infiniband network use, Lustre file system use, etc.
  * Support for MPICH2 using PMI2 communications interface with much
    greater scalability.
  * Prolog and epilog support for advanced reservations.
  * Much faster throughput for job step execution with --exclusive
    option. The srun process is notified when resources become
    available rather than periodic polling.
  * Support improved for Intel MIC (Many Integrated Core) processor.
  * Advanced reservations with hostname and core counts now supports
    asymmetric reservations (e.g. specific different core count for
    each node).
  * External sensor plugin infrastructure added to record power
    consumption, temperature, etc.
  * Improved performance for high-throughput computing.
  * MapReduce+ support (launches ~1000x faster, runs ~10x faster).
  * Added "MaxCPUsPerNode" partition configuration parameter. This
    can be especially useful to schedule GPUs. For example a node
    can be associated with two Slurm partitions (e.g. "cpu" and
    "gpu") and the partition/queue "cpu" could be limited to only a
    subset of the node's CPUs, insuring that one or more CPUs would
    be available to jobs in the "gpu" partition/queue.

-------------------------------------------------------------------
Thu Jun  6 20:31:49 UTC 2013 - scorot@free.fr

- version 2.5.7
  * Fix for linking to the select/cray plugin to not give warning
    about undefined variable.
  * Add missing symbols to the xlator.h
  * Avoid placing pending jobs in AdminHold state due to backfill
    scheduler interactions with advanced reservation.
  * Accounting - make average by task not cpu.
  * POE - Correct logic to support poe option "-euidevice sn_all"
    and "-euidevice sn_single".
  * Accounting - Fix minor initialization error.
  * POE - Correct logic to support srun network instances count
    with POE.
  * POE - With the srun --launch-cmd option, report proper task
    count when the --cpus-per-task option is used without the
    --ntasks option.
  * POE - Fix logic binding tasks to CPUs.
  * sview - Fix race condition where new information could of
    slipped past the node tab and we didn't notice.
  * Accounting - Fix an invalid memory read when slurmctld sends
    data about start job to slurmdbd.
  * If a prolog or epilog failure occurs, drain the node rather
    than setting it down and killing all of its jobs.
  * Priority/multifactor - Avoid underflow in half-life calculation.
  * POE - pack missing variable to allow fanout (more than 32
    nodes)
  * Prevent clearing reason field for pending jobs. This bug was
    introduced in v2.5.5 (see "Reject job at submit time ...").
  * BGQ - Fix issue with preemption on sub-block jobs where a job
    would kill all preemptable jobs on the midplane instead of just
    the ones it needed to. 
  * switch/nrt - Validate dynamic window allocation size.
  * BGQ - When --geo is requested do not impose the default
    conn_types.
  * RebootNode logic - Defers (rather than forgets) reboot request
    with job running on the node within a reservation.
  * switch/nrt - Correct network_id use logic. Correct support for
    user sn_all and sn_single options.
  * sched/backfill - Modify logic to reduce overhead under heavy
    load.
  * Fix job step allocation with --exclusive and --hostlist option.
  * Select/cons_res - Fix bug resulting in error of "cons_res: sync
    loop not progressing, holding job #"
  * checkpoint/blcr - Reset max_nodes from zero to NO_VAL on job
    restart.
  * launch/poe - Fix for hostlist file support with repeated host
    names.
  * priority/multifactor2 - Prevent possible divide by zero.
    -- srun - Don't check for executable if --test-only flag is
    used.
  * energy - On a single node only use the last task for gathering
    energy. Since we don't currently track energy usage per task 
    (only per step). Otherwise we get double the energy.

-------------------------------------------------------------------
Sat Apr  6 11:13:17 UTC 2013 - scorot@free.fr

- version 2.5.4
  * Support for Intel® Many Integrated Core (MIC) processors.
  * User control over CPU frequency of each job step.
  * Recording power usage information for each job.
  * Advanced reservation of cores rather than whole nodes.
  * Integration with IBM's Parallel Environment including POE (Parallel
    Operating Environment) and NRT (Network Resource Table) API.
  * Highly optimized throughput for serial jobs in a new
    "select/serial" plugin.
  * CPU load is information available
  * Configurable number of CPUs available to jobs in each SLURM
    partition, which provides a mechanism to reserve CPUs for use
    with GPUs.

-------------------------------------------------------------------
Sat Nov 17 18:02:16 UTC 2012 - scorot@free.fr

- remore runlevel 4 from init script thanks to patch1 
- fix self obsoletion of slurm-munge package
- use fdupes to remove duplicates 
- spec file reformaing

-------------------------------------------------------------------
Sat Nov 17 17:30:11 UTC 2012 - scorot@free.fr

- put perl macro in a better within install section

-------------------------------------------------------------------
Sat Nov 17 17:01:20 UTC 2012 - scorot@free.fr

- enable numa on x86_64 arch only

-------------------------------------------------------------------
Sat Nov 17 16:54:18 UTC 2012 - scorot@free.fr

- add numa and hwloc support
- fix rpath with patch0

-------------------------------------------------------------------
Fri Nov 16 21:46:49 UTC 2012 - scorot@free.fr

- fix perl module files list

-------------------------------------------------------------------
Mon Nov  5 21:48:52 UTC 2012 - scorot@free.fr

- use perl_process_packlist macro for the perl files cleanup
- fix some summaries length
- add cgoups directory and example the cgroup.release_common file

-------------------------------------------------------------------
Sat Nov  3 18:19:59 UTC 2012 - scorot@free.fr

- spec file cleanup

-------------------------------------------------------------------
Sat Nov  3 15:57:47 UTC 2012 - scorot@free.fr

- first package

Places

File slurm.changes of Package slurm (Revision 2187e7705c244411d39bf679e2122d1d)

Places