openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File gup.dif of Package gup (Revision 426e706b84cc7246453530e4f8ca0359)

Currently displaying revision 426e706b84cc7246453530e4f8ca0359 , Show latest

--- Makefile
+++ Makefile
@@ -14,8 +14,8 @@
 # the executable is only used in a .forward so /usr/local/bin may
 # not be the most appropriate place - though it doesn't hurt.
 
-BINDIR		= /usr/local/bin
-MANDIR		= /usr/local/man/man1
+BINDIR		= /usr/lib/news/bin
+MANDIR		= /usr/man/man1
 
 
 #########################################################
@@ -28,12 +28,12 @@
 
 # ACTIVE_PATH is the full pathname for your news active file. This
 # file is used to validate newgroup names.
-ACTIVE_PATH	=
+ACTIVE_PATH	= /var/lib/news/active
 
 
 # NEWSGROUPS_PATH is the fill pathname for your newsgroups file. This
 # file is used to provide descriptions for each newsgroup.
-NEWSGROUPS_PATH	=
+NEWSGROUPS_PATH	= /var/lib/news/newsgroups
 
 # BACKSTOP_MAILID is used if gup cannot find a FROM: or a REPLY-TO: or
 # a valid site command, this is where the mail goes to.
@@ -41,7 +41,7 @@
 
 # MAIL_COMMAND is the mailer that accepts a mail with rfc822 headers and
 # body from stdin.
-MAIL_COMMAND	=	"/usr/lib/sendmail -t"
+MAIL_COMMAND	=	"/usr/sbin/sendmail -t"
 
 # With a command like "include alt.*" the resultant list is, long.
 # LOG_MATCH_LIMIT, defines the upper bound on the number of pattern
@@ -50,7 +50,7 @@
 LOG_MATCH_LIMIT	=	28
 
 # The UMASK to use when creating files and directories.
-UMASK	=	022
+UMASK	=	002
 
 
 #################################################
@@ -71,18 +71,18 @@
 xmakefile:	Makefile main.mk ./config/$(CONFIG)
 	@echo
 	@echo	Constructing xmakefile with ./config/$(CONFIG)
-	(						\
-	cat	./config/$(CONFIG)			;\
-	echo	CONFIG=$(CONFIG)			;\
-	echo 	BINDIR=$(BINDIR)			;\
-	echo 	MANDIR=$(MANDIR)			;\
-	echo 	ACTIVE_PATH=$(ACTIVE_PATH)	 	;\
-	echo 	NEWSGROUPS_PATH=$(NEWSGROUPS_PATH)	;\
-	echo 	BACKSTOP_MAILID=$(BACKSTOP_MAILID) 	;\
-	echo 	MAIL_COMMAND=$(MAIL_COMMAND)	 	;\
-	echo 	LOG_MATCH_LIMIT=$(LOG_MATCH_LIMIT) 	;\
-	echo 	UMASK=$(UMASK)			 	;\
-	cat	main.mk					;\
+	@(						\
+	cat	./config/$(CONFIG)			; \
+	echo	CONFIG=$(CONFIG)			; \
+	echo 	BINDIR=$(BINDIR)			; \
+	echo 	MANDIR=$(MANDIR)			; \
+	echo 	ACTIVE_PATH=$(ACTIVE_PATH)	 	; \
+	echo 	NEWSGROUPS_PATH=$(NEWSGROUPS_PATH)	; \
+	echo 	BACKSTOP_MAILID=$(BACKSTOP_MAILID) 	; \
+	echo 	MAIL_COMMAND=$(MAIL_COMMAND)	 	; \
+	echo 	LOG_MATCH_LIMIT=$(LOG_MATCH_LIMIT) 	; \
+	echo 	UMASK=$(UMASK)			 	; \
+	cat	main.mk					; \
 	) >xmakefile
 	@echo
 
--- README.linux
+++ README.linux
@@ -0,0 +1,24 @@
+How to get gup running:			Florian La Roche
+=======================
+
+- add "newsgup: news" to /etc/aliases and don't forward "news"-postings
+  to "root" (delete the line with "news: root")
+  So "news" has no its own mail-folder and "newsgup" is an alias for it.
+- "mkdir /usr/lib/news/Mail"
+- create "/usr/lib/news/.procmailrc" with the followin lines:
+  (but do write the 2 last lines into one line...)
+	MAILDIR=$HOME/Mail
+	LOGFILE=$MAILDIR/from
+	LOCKFILE=$HOME/.lockmail
+
+	:0
+	* ^TO.*gup
+	|/usr/lib/news/bin/gup -P -d /var/lib/news/gup -l log \
+		-m gup_headers -s sites
+- Look at all files in /var/lib/news/gup/ and edit them to your taste.
+  Don't forget to change "gup_headers" to have a Reply-To: with
+  a complete hostname.
+- You should run gupdate to update your newsfeeds file. Maybe use
+  the following entry in /etc/crontab:
+	49 */6 * * * news /usr/lib/news/bin/gupdate
+
--- config/vanilla
+++ config/vanilla
@@ -1,4 +1,5 @@
 #
 # Ultrix V4.3			Aherbert
 
-P_CFLAGS	= -g
+P_CFLAGS	= -Wall -O2 -pipe $(RPM_OPT_FLAGS)
+
--- gup.c
+++ gup.c
@@ -37,7 +37,7 @@
 
 
 char	*progname = "gup";		/* GC */
-FILE	*log_fp = stderr;
+FILE	*log_fp;
 
 static	char	*usage =
 "\n\
@@ -166,6 +166,7 @@
     int		changed;
 
     umask(UMASK);
+    log_fp = stderr;
 
     parse_options(argc, argv);		/* Decode our command line options */
 
--- rfc822.h
+++ rfc822.h
@@ -246,7 +246,9 @@
 extern int	errno;
 extern int	sys_nerr;
 extern int	optind;
+#if !(defined __GLIBC__ && __GLIBC__ >=2)
 extern char	*sys_errlist[];
+#endif
 extern char	**environ;
 extern char	*optarg;
 
--- sample/config
+++ sample/config
@@ -1,2 +1,4 @@
-t	t	andrew@werple
-
+#  Each line should have three entries:
+#  The name of the host, the password and an email address
+#  to which the result is emailed.
+#host	passwd	mail@host.domain.com
--- sample/default/exclude
+++ sample/default/exclude
@@ -0,0 +1 @@
+control
--- sample/default/groups
+++ sample/default/groups
@@ -0,0 +1,2 @@
+local.*
+!local.lists*
--- sample/default/header
+++ sample/default/header
@@ -0,0 +1,2 @@
+# HOST Eintrag (HOST wird ersetzt durch site-namen)
+HOST/HOST.saar.de:wg.*,\
--- sample/default/trailer
+++ sample/default/trailer
@@ -0,0 +1 @@
+local.adm/!local:Tm:uucp!
--- sample/gup_headers
+++ sample/gup_headers
@@ -0,0 +1,2 @@
+Reply-To: postmaster
+Subject: Your GUP request processing result
--- sample/gupadd
+++ sample/gupadd
@@ -0,0 +1,29 @@
+#! /bin/sh
+umask 077
+if [ -z "$1" -o -z "$2" -o -z "$3" ]; then
+	cat <<EOM
+addsite: add a new site to feed
+usage: addsite [-f] "sitename" "gup passwort" "email address for replies"
+Be aware of the fact that the newsfeeds-file is not updated, but
+must be brought up to date with gupdate
+EOM
+	exit 0
+fi
+# configuration variables
+site=$1
+passwd=$2
+mail=$3
+. /var/lib/news/gup/gupconfig
+if [ -d $sitedir ] || grep -s "^$site[ \t]" $gupdir/config ; then
+	echo "The directory $sitedir already exists or this host is already"
+	echo "in your $gupdir/config file."
+	exit 1
+fi
+mkdir -p $sitedir
+ln -sf $defhdr $sitedir/header
+ln -sf $deftrail $sitedir/trailer
+sed -e "s/HOST/$site/g" $defgroup >$sitedir/groups
+ln -sf $defexcl $sitedir/exclude
+echo "creating new entry in config file"
+echo "$site $passwd $mail" >>$gupdir/config
+exit 0
--- sample/gupconfig
+++ sample/gupconfig
@@ -0,0 +1,25 @@
+#
+# set variables for gup configuration
+# (you should not need to edit this file)
+#
+gupdir=/var/lib/news/gup
+newsdir=/var/lib/news
+newsspool=/var/spool/news
+sitesdir=$gupdir/sites
+sitedir=$sitesdir/$site
+default=$gupdir/default
+defhdr=$default/header
+deftrail=$default/trailer
+defgroup=$default/groups
+defexcl=$default/exclude
+# the username that gup runs as
+gup_uid=news
+
+# gupdate writes a new newsfeeds file $newsfeeds.new is also used
+# as temporary file
+newsfeeds=/var/lib/news/newsfeeds
+mailcmd=/bin/mail
+# error mails go to this person
+news_admin=postmaster
+ctlinnd=/usr/lib/news/bin/ctlinnd
+
--- sample/gupdate
+++ sample/gupdate
@@ -0,0 +1,51 @@
+#! /bin/sh
+# A script to rebuild the newsfeed file after a gup run
+
+. /var/lib/news/gup/gupconfig
+PATH=/usr/bin:/bin:/usr/lib/news/bin
+
+########################### end of user-config stuff ##########################
+
+cd $gupdir
+(
+	cat newsfeeds.start
+	cd sites
+	for h in * ; do
+		if [ -s "$h/groups" ]; then
+			echo
+			sed -e "s/HOST/$h/g" $h/header			#header
+			sed -e 's/$/,\\/g' -e 's/\\.\\*$//g' $h/groups	#body
+			sed -e "s/HOST/$h/g" $h/trailer			#trailer
+		fi
+	done
+	cd ..
+	cat newsfeeds.end
+) >$newsfeeds.new
+
+# commit the new version
+mv -f $newsfeeds.old $newsfeeds.old1
+mv -f $newsfeeds $newsfeeds.old
+mv $newsfeeds.new $newsfeeds
+
+# verify that it's ok
+$ctlinnd checkfile >/dev/null 2>/dev/null
+ok=$?
+if [ "$ok" -ne 0 ]; then
+  echo "argh!  $newsfeeds verification failed - moving back previous version"
+  mv $newsfeeds $newsfeeds.broken
+  mv -f $newsfeeds.old $newsfeeds
+  $mailcmd -s "gup newsfeeds failure!" $news_admin <<SIGH
+gup has gone weird - the generated newsfeeds file has been rejected by
+$ctlinnd checkfile.  Please check:
+	$newsfeeds.broken
+
+to determine the source of the problem.
+
+yours in efficiency,
+the gupdate daemon
+SIGH
+  exit 1
+fi
+
+# tell INN about it
+$ctlinnd reload newsfeeds gupup 2>&1 >/dev/null
--- sample/gupverify
+++ sample/gupverify
@@ -0,0 +1,21 @@
+#! /bin/sh
+# A script to check gup consistency
+
+. /var/lib/news/gup/gupconfig
+verify_file () {
+	[ -f "$1" ] && return
+	echo "linking $1 -> $2"
+	ln -sf $1 $2
+}
+for h in $sitesdir/* ; do
+  site=`basename $h`
+  echo $site
+  verify_file $h/header $defhdr			# header
+  if [ ! -f $h/groups ]; then			# body
+    echo "copying basic groups entry (performing customization) -> $h/groups"
+    sed -e "s/HOST/$site/g" $defgroup >$h/groups
+  fi
+  verify_file $h/trailer $deftrail		# trailer
+  verify_file $h/exclude $defexcl		# exclusions
+done
+chown $gup_uid $sitesdir/*/groups
--- sample/newsfeeds.end
+++ sample/newsfeeds.end
@@ -0,0 +1,6 @@
+# Beginning of /var/lib/news/gup/newsfeeds.end.
+# This is used as the end of /var/lib/news/newsfeeds.
+
+# This is currently empty, we don't need any entries here...
+
+# End of /var/lib/news/gup/newsfeeds.end.
--- sample/newsfeeds.start
+++ sample/newsfeeds.start
@@ -0,0 +1,26 @@
+# Beginning of /var/lib/news/gup/newsfeeds.start.
+# This is used as the start of /var/lib/news/newsfeeds.
+
+ME:*::
+
+# for NOV overview database
+OVERVIEW!:*:Tc,WO:/usr/lib/news/bin/overchan
+
+# sample entry for UUCP
+#hugo/hugo.suse.de:*,!junk,!control*:Tf,Wnb,B4096/1024:
+
+# sample entry for NNTP
+#hugo.suse.de:*,!junk,!control*:Tf,Wnm:hugo.suse.de
+
+uucp!:!*:Tx,Wnb*:/usr/lib/news/bin/buffchan -f 2
+
+nntp!:!*:Tx,Wnm*:/usr/lib/news/bin/buffchan -f 2
+
+# the upstream uucp news server
+#server/server.com\
+#	:*,!junk/!local:Tm:uucp!
+# the upstream nntp news server
+#server/server.com\
+#	:*,!junk/!local:Tm:nntp!
+ 
+# End of /var/lib/news/gup/newsfeeds.start
--- lock.c.orig	2008-01-24 11:12:09.000000000 +0100
+++ ./lock.c	2008-01-24 11:12:20.000000000 +0100
@@ -38,7 +38,7 @@ lockit()
 	sleep(LOCK_SLEEP);
     }
     if (fd < 0 && errno == EEXIST) {
-	fd = open("LOCK", O_CREAT | O_WRONLY);
+	fd = open("LOCK", O_CREAT | O_WRONLY, 0600);
 	if (fd >= 0)
 	    logit(L_LOG, "WARNING", "Trashed pre-existing lock");
     }

Places

File gup.dif of Package gup (Revision 426e706b84cc7246453530e4f8ca0359)

Places